Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.
Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Revert "Client-side protocol V2 support for fetching"
This reverts commit f802f06e7f.
I had misunderstood how protocol V2 works. This implementation only
works if the negotiation during fetch is done in one round.
Fixing this is substantial work in BasePackFetchConnection. Basically
I think I'd have to change back negotiate to the V0 version, and have
a doFetch() that does
if protocol V2
doFetchV2()
else
doFetchV0()
with doFetchV0 the old code, and doFetchV2 completely new.
Plus there would need to be a HTTP test case requiring several
negotiation rounds.
This is a couple of days work at least, and I don't know when I will
have the time to revisit this. So although the rest of the code is
fine I prefer to back this out completely and not leave a only half
working implementation in the code for an indeterminate time.
Bug: 553083
Change-Id: Icbbbb09882b3b83f9897deac4a06d5f8dc99d84e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (simplified ACK handling, delimiters, section
headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. Do the same for the SSH transport tests.
Bug: 553083
Change-Id: Ice9866aa78020f5ca8f397cde84dc224bf5d41b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
SshSupport.runSshCommand() had a comment that wait with time-out
could not be used because JSchProcess.exitValue() threw the wrong
unchecked exception when the process was still running.
Fix this and make JSchProcess.exitValue() throw the right exception,
then wait with a time-out in SshSupport.
The Apache sshd client's SshdExecProcess has always used the correct
IllegalThreadStateException.
Add tests for SshSupport.runCommand().
Change-Id: Id30893174ae8be3b9a16119674049337b0cf4381
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Motivation: JSch serves as 'default' implementations of the SSH
transport. If a client application does not use it then there is no need
to pull in this dependency.
Move the classes depending on JSch to an OSGi fragment extending the
org.eclipse.jgit bundle and keep them in the same package as before
since moving them to another package would break API. Defer moving them
to a separate package to the next major release.
Add a new feature org.eclipse.jgit.ssh.jsch feature to enable
installation. With that users can now decide which of the ssh client
integrations (JCraft JSch or Apache Mina SSHD) they want to install.
We will remove the JCraft JSch integration in a later step due to the
reasons discussed in bug 520927.
Bug: 553625
Change-Id: I5979c8a9dbbe878a2e8ac0fbfde7230059d74dc2
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Add more ssh tests: pushing, known_host file handling, etc.
Add support for git-receive-pack to the ssh git server and add two
new tests for pushing.
This actually uncovered an undocumented requirement in TransportSftp:
the FTP rename operation assumes POSIX semantics, i.e., that the
target is removed. This works as written only for servers that
support and advertise the "posix-rename@openssh.com" FTP extension.
Our little Apache MINA server does not advertise this extension.
Fix the FtpChannel implementation for Jsch to handle this case in a
meaningful way so that it can pass the new "push over sftp" test.
Add more tests to test the behavior of server host key checking.
Also refactor the tests generally to separate better the test
framework from the actual tests.
Bug: 520927
Change-Id: Ia4bb85e17ddacde7b36ee8c2d5d454bbfa66dfc3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Introduce an FtpChannel abstraction, which can be obtained from a
RemoteSession. In JSchSession, wrap a JSch ChannelSftp as such an
FtpChannel. The JSch-specific SftpException is also mapped to a
generic FtpException. Rewrite TransportSftp to use only the new
abstraction layer.
This makes it possible to provide alternate ssh/sftp implementations.
Bug: 520927
Change-Id: I379026f7d4122f34931df909a28e73c02cd8a1da
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Remove it from
* package private functions.
* try blocks
* for loops
this was done with the following python script:
$ cat f.py
import sys
import re
import os
def replaceFinal(m):
return m.group(1) + "(" + m.group(2).replace('final ', '') + ")"
methodDecl = re.compile(r"^([\t ]*[a-zA-Z_ ]+)\(([^)]*)\)")
def subst(fn):
input = open(fn)
os.rename(fn, fn + "~")
dest = open(fn, 'w')
for l in input:
l = methodDecl.sub(replaceFinal, l)
dest.write(l)
dest.close()
for root, dirs, files in os.walk(".", topdown=False):
for f in files:
if not f.endswith('.java'):
continue
full = os.path.join(root, f)
print full
subst(full)
Change-Id: If533a75a417594fc893e7c669d2c1f0f6caeb7ca
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Enable and fix 'Should be tagged with @Override' warning
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Switch JSchSession to simple isolated OutputStream
Work around issues with JSch not handling interrupts by
isolating the JSch interactions onto another thread.
Run write and flush on a single threaded Executor using
simple Callable operations wrapping the method calls,
waiting on the future to determine the outcome before
allowing the caller to continue.
If any operation was interrupted the state of the stream
becomes fuzzy at close time. The implementation tries to
interrupt the pending write or flush, but this is very
likely to corrupt the stream object, so exceptions are
ignored during such a dirty close.
Change-Id: I42e3ba3d8c35a2e40aad340580037ebefbb99b53
[performance] Remove synthetic access$ methods in transport package
Java compiler must generate synthetic access methods for private methods
and fields of the enclosing class if they are accessed from inner
classes and vice versa.
While invisible in the code, those synthetic access methods exist in the
bytecode and seem to produce some extra execution overhead at runtime
(compared with the direct access to this fields or methods), see
https://git.eclipse.org/r/58948/.
By removing the "private" access modifier from affected methods and
fields we help compiler to avoid generation of synthetic access methods
and hope to improve execution performance.
To validate changes, one can either use javap or use Bytecode Outline
plugin in Eclipse. In both cases one should look for "synthetic
access$<number>" methods at the end of the class and inner class files
in question - there should be none.
NB: don't mix this "synthetic access$" methods up with "public synthetic
bridge" methods generated to allow generic method override return types.
Change-Id: I0ebaeb2bc454cd8051b901addb102c1a6688688b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
A few classes such as Constanrs are marked with @SuppressWarnings, as are
toString() methods with many liternal, but otherwise $NLS-n$ is used for
string containing text that should not be translated. A few literals may
fall into the gray zone, but mostly I've tried to only tag the obvious
ones.
Change-Id: I22e50a77e2bf9e0b842a66bdf674e8fa1692f590
The RemoteSession interface operates like a simplified version of
java.lang.Runtime with a single exec method (and a disconnect
method). It returns a java.lang.Process, which should begin execution
immediately. Note that this greatly simplifies the interface for
running commands. There is no longer a connect method, and most
implementations will contain the bulk of their code inside
Process.exec, or a constructor called by Process.exec. (See the
revised implementations of JschSession and ExtSession.)
Implementations can now configure their connections properly without
either ignoring the proper use of the interface or trying to adhere
to an overly strict interface with odd rules about what methods are
called first. For example, Jsch needs to create the output stream
before executing, which it now does in the process constructor. These
changes should make it much easier to add alternate session
implementations in the future.
Also-by: John D Eblen <jdeblen@comcast.net>
Bug: 336749
CQ: 5004
Change-Id: Iece43632086afadf175af6638255041ccaf2bfbb
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>