Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (simplified ACK handling, delimiters, section
headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. Do the same for the SSH transport tests.
Bug: 553083
Change-Id: Ice9866aa78020f5ca8f397cde84dc224bf5d41b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Allow the client to specify "sideband-all" in a fetch v2 request,
indicating that the whole response is to be multiplexed (with a sideband
indicator on every non-flush and non-delim pkt) instead of only the
packfile being multiplexed. This allows, for example, progress messages
to be sent at any point in the response.
This implements the "sideband-all" feature documented in
Documentation/technical/protocol-v2.txt in Git.
Change-Id: I3e7f21c88ff0982b1b7ebb09c9ad6c742c4483c8
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Accept protocol v2 server options on fetch and ls-refs requests
In protocol v2, a command request can be followed by server options
(lines like "agent=<>" and "server-option=<>"), but current code
doesn't accept those lines.
Advertise the "server-option" capability, parse the lines and add
them to the request objects.
Other code in JGit can see this options and act accordingly via the
protocol v2 hooks.
This should not require any change in the client side.
Change-Id: If3946390f9cc02d29644b6ca52534b6f757bda9f
Signed-off-by: Ivan Frade <ifrade@google.com>
Declare ConfigConstants and GitProtocolConstants final
This avoids that we have to suppress API errors whenever we add a new
constant in a minor release. This change affects implementors only which
is ok to do in a minor release following OSGi semantic versioning rules.
Change-Id: Iece841886fbe00f1ba567c5ff68093c542ba265e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
UploadPack already allows the client to send wanted OIDs as "want"
lines. Extend UploadPack to also allow the client to send wanted ref
names as "want-ref" lines when the fetch is done using protocol v2.
The corresponding Git commit is 516e2b76bd ("upload-pack: implement
ref-in-want", 2018-06-28).
To support a two-stage rollout, two configuration variables are
provided: uploadpack.allowrefinwant (default "false") allows clients to
specify "want-ref" in their requests, and uploadpack.advertiserefinwant
(default "true") makes UploadPack advertise this capability. If
uploadpack.allowrefinwant is true but uploadpack.advertiserefinwant is
false, UploadPack will not advertise that it supports "want-ref", but it
will support it.
Change-Id: I3c24077949640d453af90d81a7f48ce4b8ac9833
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Add support for the "shallow" and "deepen" parameters in the "fetch"
command in the fetch-pack/upload-pack protocol v2. Advertise support for
this in the capability advertisement.
TODO: implement deepen-relative, deepen-since, deepen-not
Change-Id: I7ffd80d6c38872f9d713ac7d6e0412106b3766d7
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Add basic support for the "fetch" command in the fetch-pack/upload-pack
protocol v2. This patch teaches "have" and "done".
The protocol specification (Documentation/technical/protocol-v2.txt in
the Git project) states:
want <oid>
Indicates to the server an object which the client wants to
retrieve. Wants can be anything and are not limited to
advertised objects.
It is unspecified whether the server should respect the
uploadpack.allowtipsha1inwant option etc. when serving packfiles. This
patch is conservative in that the server respects them.
Change-Id: I3dbec172239712ef9286a15b8407e86b87ea7863
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Implement support for Git protocol v2's "ls-refs" command and its
"symrefs" and "peel" parameters.
This adds support for this command to UploadPack but the git://,
ssh://, and git:// transports do not make use of it yet. That will
have to wait for later patches.
Change-Id: I8abc6bcc6ed4a88c165677ff1245625aca01267b
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Teach UploadPack to support filtering by blob size
Teach UploadPack to advertise the filter capability and support a
"filter" line in the request, accepting blob sizes only, if the
configuration variable "uploadpack.allowfilter" is true. This feature is
currently in the "master" branch of Git, and as of the time of writing,
this feature is to be released in Git 2.17.
This is incomplete in that the filter-by-sparse-specification feature
also supported by Git is not included in this patch.
If a JGit server were to be patched with this commit, and a repository
on that server configured with RequestPolicy.ANY or
RequestPolicy.REACHABLE_COMMIT_TIP, a Git client built from the "master"
branch would be able to perform a partial clone.
Change-Id: If72b4b422c06ab432137e9e5272d353b14b73259
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Example usage:
$ ./jgit push \
--push-option "Reviewer=j.doe@example.org" \
--push-option "<arbitrary string>" \
origin HEAD:refs/for/master
Stefan Beller has also made an equivalent change to CGit:
http://thread.gmane.org/gmane.comp.version-control.git/299872
Change-Id: I6797e50681054dce3bd179e80b731aef5e200d77
Signed-off-by: Dan Wang <dwwang@google.com>
UploadPack: Use reachable-sha1-in-want configuration
C git 2.5 supports setting the equivalent of
RequestPolicy.REACHABLE_COMMIT with uploadpack.allowreachablesha1inwant.
Parse this into TransportConfig and use it from UploadPack. An explicitly
set RequestPolicy overrides the config, and the policy may still be
upgraded on a unidirectional connection to avoid races.
Change-Id: Id39771a6e42d8082099acde11249306828a053c0
Signed-off-by: Fredrik Medley <fredrik.medley@gmail.com>
git-core has supported this for a long time; allowing clients to
avoid progress messages from the server if they are dumping to a
pipe instead of a tty.
Avoid the two progress monitors going on side-band and expose
isQuiet() method to allow hooks to also reduce their output if
this is sensible for them.
Change-Id: I1df7e38d16765446b441366500b017a90b8ff958
Since git-core ff5effd (v1.7.12.1) the native wire protocol transmits
the server and client implementation and version strings using
capability "agent=git/1.7.12.1" or similar.
Support this in JGit and hang the implementation data off UploadPack
and ReceivePack. On HTTP transports default to the User-Agent HTTP
header until the client overrides this with the optional capability
string in the first line.
Extract the user agent string into a UserAgent class under transport
where it can be specified to a different value if the application's
build process has broken the Implementation-Version header in the
JGit package.
Change-Id: Icfc6524d84a787386d1786310b421b2f92ae9e65
Add/fix since tags for new API for push certificates
This was missed in change I249869cadb2d55aef016371b9311b8583591b9cf
Change-Id: I19c9d4c04b6aa92b9e04c192dee70775d6985b58
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Push certificates ("git push --signed") have been part of
git-core since version 2.2.0 (released Nov 26 2014). We also
want to support that feature.
This is not complete and is lacking the actual functionality
to validate the signature for now.
Change-Id: I249869cadb2d55aef016371b9311b8583591b9cf
Signed-off-by: Stefan Beller <sbeller@google.com>
The atomic feature is now cooking in -next in git-core. Very rarely
features are ejected from the the next branch in git-core, so I consider
it reasonable to come up with this patch now to make the 2 implementations
interoperable.
Change-Id: I806a8ae3c045ca5936f69cb903baf9b99ee39181
Signed-off-by: Stefan Beller <sbeller@google.com>
cgit has this feature for some time. This will teach JGit to send symbolic refs,
too.
Change-Id: I7cb2ab4e6d31a838a0af92eac64535fdb66ed74a
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Implement atomic refs update, if possible by database
Inspired by the series[1], this implements the possibility to
have atomic ref transactions.
If the database supports atomic ref update capabilities, we'll
advertise these. If the client wishes to use this feature, either
all refs will be updated or none at all.
[1] http://thread.gmane.org/gmane.comp.version-control.git/259019/focus=259024
Change-Id: I7b5d19c21f3b5557e41b9bcb5d359a65ff1a493d
Signed-off-by: Stefan Beller <sbeller@google.com>
Thomas Wolf
David Pursehouse
Matthias Sohn
Jonathan Tan
Michael Keppler
Ivan Frade
Dan Wang
Fredrik Medley
Shawn Pearce
Stefan Beller
Yuxuan 'fishy' Wang
Shawn Pearce