1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131213221332134213521362137213821392140214121422143214421452146214721482149215021512152215321542155215621572158215921602161216221632164216521662167216821692170217121722173217421752176217721782179218021812182218321842185218621872188218921902191219221932194219521962197219821992200220122022203220422052206220722082209221022112212221322142215221622172218221922202221222222232224222522262227222822292230223122322233223422352236223722382239224022412242224322442245224622472248224922502251225222532254225522562257225822592260226122622263226422652266226722682269227022712272227322742275227622772278227922802281228222832284228522862287228822892290229122922293229422952296229722982299 |
- #! /bin/sh
-
- # Guess values for system-dependent variables and create Makefiles.
- # Generated automatically using autoconf version 2.13
- # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
- #
- # This configure script is free software; the Free Software Foundation
- # gives unlimited permission to copy, distribute and modify it.
-
- # Defaults:
- ac_help=
- ac_default_prefix=/usr/local
- # Any additions from configure.in:
- ac_help="$ac_help
- --with-x use the X Window System"
- ac_help="$ac_help
- --with-installed-zlib use the version of zlib which is installed on the
- system instead of the one distributed with VNC"
-
- # Initialize some variables set by options.
- # The variables have the same names as the options, with
- # dashes changed to underlines.
- build=NONE
- cache_file=./config.cache
- exec_prefix=NONE
- host=NONE
- no_create=
- nonopt=NONE
- no_recursion=
- prefix=NONE
- program_prefix=NONE
- program_suffix=NONE
- program_transform_name=s,x,x,
- silent=
- site=
- srcdir=
- target=NONE
- verbose=
- x_includes=NONE
- x_libraries=NONE
- bindir='${exec_prefix}/bin'
- sbindir='${exec_prefix}/sbin'
- libexecdir='${exec_prefix}/libexec'
- datadir='${prefix}/share'
- sysconfdir='${prefix}/etc'
- sharedstatedir='${prefix}/com'
- localstatedir='${prefix}/var'
- libdir='${exec_prefix}/lib'
- includedir='${prefix}/include'
- oldincludedir='/usr/include'
- infodir='${prefix}/info'
- mandir='${prefix}/man'
-
- # Initialize some other variables.
- subdirs=
- MFLAGS= MAKEFLAGS=
- SHELL=${CONFIG_SHELL-/bin/sh}
- # Maximum number of lines to put in a shell here document.
- ac_max_here_lines=12
-
- ac_prev=
- for ac_option
- do
-
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- case "$ac_option" in
- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) ac_optarg= ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case "$ac_option" in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir="$ac_optarg" ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build="$ac_optarg" ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file="$ac_optarg" ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir="$ac_optarg" ;;
-
- -disable-* | --disable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- eval "enable_${ac_feature}=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_${ac_feature}='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix="$ac_optarg" ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he)
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat << EOF
- Usage: configure [options] [host]
- Options: [defaults in brackets after descriptions]
- Configuration:
- --cache-file=FILE cache test results in FILE
- --help print this message
- --no-create do not create output files
- --quiet, --silent do not print \`checking...' messages
- --version print the version of autoconf that created configure
- Directory and file names:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [same as prefix]
- --bindir=DIR user executables in DIR [EPREFIX/bin]
- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data in DIR
- [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data in DIR
- [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
- --includedir=DIR C header files in DIR [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
- --infodir=DIR info documentation in DIR [PREFIX/info]
- --mandir=DIR man documentation in DIR [PREFIX/man]
- --srcdir=DIR find the sources in DIR [configure dir or ..]
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM
- run sed PROGRAM on installed program names
- EOF
- cat << EOF
- Host type:
- --build=BUILD configure for building on BUILD [BUILD=HOST]
- --host=HOST configure for HOST [guessed]
- --target=TARGET configure for TARGET [TARGET=HOST]
- Features and packages:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
- EOF
- if test -n "$ac_help"; then
- echo "--enable and --with options recognized:$ac_help"
- fi
- exit 0 ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host="$ac_optarg" ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir="$ac_optarg" ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir="$ac_optarg" ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir="$ac_optarg" ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir="$ac_optarg" ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir="$ac_optarg" ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir="$ac_optarg" ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir="$ac_optarg" ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix="$ac_optarg" ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix="$ac_optarg" ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix="$ac_optarg" ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name="$ac_optarg" ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir="$ac_optarg" ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir="$ac_optarg" ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site="$ac_optarg" ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir="$ac_optarg" ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir="$ac_optarg" ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target="$ac_optarg" ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13"
- exit 0 ;;
-
- -with-* | --with-*)
- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "with_${ac_package}='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval "with_${ac_package}=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes="$ac_optarg" ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries="$ac_optarg" ;;
-
- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
- ;;
-
- *)
- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
- echo "configure: warning: $ac_option: invalid host type" 1>&2
- fi
- if test "x$nonopt" != xNONE; then
- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
- fi
- nonopt="$ac_option"
- ;;
-
- esac
- done
-
- if test -n "$ac_prev"; then
- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
- fi
-
- trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
- # File descriptor usage:
- # 0 standard input
- # 1 file creation
- # 2 errors and warnings
- # 3 some systems may open it to /dev/tty
- # 4 used on the Kubota Titan
- # 6 checking for... messages and results
- # 5 compiler messages saved in config.log
- if test "$silent" = yes; then
- exec 6>/dev/null
- else
- exec 6>&1
- fi
- exec 5>./config.log
-
- echo "\
- This file contains any messages produced by compilers while
- running configure, to aid debugging if configure makes a mistake.
- " 1>&5
-
- # Strip out --no-create and --no-recursion so they do not pile up.
- # Also quote any args containing shell metacharacters.
- ac_configure_args=
- for ac_arg
- do
- case "$ac_arg" in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
- esac
- done
-
- # NLS nuisances.
- # Only set these to C if already set. These must not be set unconditionally
- # because not all systems understand e.g. LANG=C (notably SCO).
- # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
- # Non-C LC_CTYPE values break the ctype check.
- if test "${LANG+set}" = set; then LANG=C; export LANG; fi
- if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
- if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
- if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-
- # confdefs.h avoids OS command line length limits that DEFS can exceed.
- rm -rf conftest* confdefs.h
- # AIX cpp loses on an empty file, so make sure it contains at least a newline.
- echo > confdefs.h
-
- # A filename unique to this package, relative to the directory that
- # configure is in, which we can look for to find out if srcdir is correct.
- ac_unique_file=rdr/InStream.h
-
- # Find the source files, if location was not specified.
- if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
- else
- ac_srcdir_defaulted=no
- fi
- if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
- else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
- fi
- fi
- srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
- # Prefer explicitly selected file to automatically selected ones.
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
- fi
- for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- echo "loading site script $ac_site_file"
- . "$ac_site_file"
- fi
- done
-
- if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
- else
- echo "creating cache $cache_file"
- > $cache_file
- fi
-
- ac_ext=c
- # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cc_cross
-
- ac_exeext=
- ac_objext=o
- if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
- ' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
- else
- ac_n= ac_c='\c' ac_t=
- fi
-
-
-
- ac_cv_prog_cc_g=no
- ac_cv_prog_cxx_g=no
-
- # Extract the first word of "gcc", so it can be a program name with args.
- set dummy gcc; ac_word=$2
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:537: checking for $ac_word" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
- fi
- fi
- CC="$ac_cv_prog_CC"
- if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
- else
- echo "$ac_t""no" 1>&6
- fi
-
- if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
- set dummy cc; ac_word=$2
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:567: checking for $ac_word" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
- if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
- fi
- fi
- fi
- fi
- CC="$ac_cv_prog_CC"
- if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
- else
- echo "$ac_t""no" 1>&6
- fi
-
- if test -z "$CC"; then
- case "`uname -s`" in
- *win32* | *WIN32*)
- # Extract the first word of "cl", so it can be a program name with args.
- set dummy cl; ac_word=$2
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:618: checking for $ac_word" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
- else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="cl"
- break
- fi
- done
- IFS="$ac_save_ifs"
- fi
- fi
- CC="$ac_cv_prog_CC"
- if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
- else
- echo "$ac_t""no" 1>&6
- fi
- ;;
- esac
- fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
- fi
-
- echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
- echo "configure:650: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
- ac_ext=c
- # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cc_cross
-
- cat > conftest.$ac_ext << EOF
-
- #line 661 "configure"
- #include "confdefs.h"
-
- main(){return(0);}
- EOF
- if { (eval echo configure:666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
- fi
- rm -fr conftest*
- ac_ext=c
- # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cc_cross
-
- echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
- if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
- fi
- echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
- echo "configure:692: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
- echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
- cross_compiling=$ac_cv_prog_cc_cross
-
- echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
- echo "configure:697: checking whether we are using GNU C" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.c <<EOF
- #ifdef __GNUC__
- yes;
- #endif
- EOF
- if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:706: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
- else
- ac_cv_prog_gcc=no
- fi
- fi
-
- echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
- if test $ac_cv_prog_gcc = yes; then
- GCC=yes
- else
- GCC=
- fi
-
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
- echo "configure:725: checking whether ${CC-cc} accepts -g" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- echo 'void f(){}' > conftest.c
- if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
- else
- ac_cv_prog_cc_g=no
- fi
- rm -f conftest*
-
- fi
-
- echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
- else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
- fi
-
- for ac_prog in $CCC c++ g++ gcc CC cxx cc++ cl
- do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
- set dummy $ac_prog; ac_word=$2
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:761: checking for $ac_word" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test -n "$CXX"; then
- ac_cv_prog_CXX="$CXX" # Let the user override the test.
- else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CXX="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
- fi
- fi
- CXX="$ac_cv_prog_CXX"
- if test -n "$CXX"; then
- echo "$ac_t""$CXX" 1>&6
- else
- echo "$ac_t""no" 1>&6
- fi
-
- test -n "$CXX" && break
- done
- test -n "$CXX" || CXX="gcc"
-
-
- echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
- echo "configure:793: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
-
- ac_ext=C
- # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CXXCPP $CPPFLAGS'
- ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cxx_cross
-
- cat > conftest.$ac_ext << EOF
-
- #line 804 "configure"
- #include "confdefs.h"
-
- int main(){return(0);}
- EOF
- if { (eval echo configure:809: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- ac_cv_prog_cxx_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cxx_cross=no
- else
- ac_cv_prog_cxx_cross=yes
- fi
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cxx_works=no
- fi
- rm -fr conftest*
- ac_ext=c
- # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CPP $CPPFLAGS'
- ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cc_cross
-
- echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6
- if test $ac_cv_prog_cxx_works = no; then
- { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
- fi
- echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
- echo "configure:835: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
- echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
- cross_compiling=$ac_cv_prog_cxx_cross
-
- echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
- echo "configure:840: checking whether we are using GNU C++" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.C <<EOF
- #ifdef __GNUC__
- yes;
- #endif
- EOF
- if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:849: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gxx=yes
- else
- ac_cv_prog_gxx=no
- fi
- fi
-
- echo "$ac_t""$ac_cv_prog_gxx" 1>&6
-
- if test $ac_cv_prog_gxx = yes; then
- GXX=yes
- else
- GXX=
- fi
-
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS=
- echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
- echo "configure:868: checking whether ${CXX-g++} accepts -g" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- echo 'void f(){}' > conftest.cc
- if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then
- ac_cv_prog_cxx_g=yes
- else
- ac_cv_prog_cxx_g=no
- fi
- rm -f conftest*
-
- fi
-
- echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6
- if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS="$ac_save_CXXFLAGS"
- elif test $ac_cv_prog_cxx_g = yes; then
- if test "$GXX" = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-g"
- fi
- else
- if test "$GXX" = yes; then
- CXXFLAGS="-O2"
- else
- CXXFLAGS=
- fi
- fi
-
- # Extract the first word of "ranlib", so it can be a program name with args.
- set dummy ranlib; ac_word=$2
- echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
- echo "configure:902: checking for $ac_word" >&5
- if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
- else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
- fi
- fi
- RANLIB="$ac_cv_prog_RANLIB"
- if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
- else
- echo "$ac_t""no" 1>&6
- fi
-
- echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
- echo "configure:930: checking whether ${MAKE-make} sets \${MAKE}" >&5
- set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftestmake <<\EOF
- all:
- @echo 'ac_maketemp="${MAKE}"'
- EOF
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
- if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
- else
- eval ac_cv_prog_make_${ac_make}_set=no
- fi
- rm -f conftestmake
- fi
- if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SET_MAKE=
- else
- echo "$ac_t""no" 1>&6
- SET_MAKE="MAKE=${MAKE-make}"
- fi
-
- ac_ext=C
- # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CXXCPP $CPPFLAGS'
- ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cxx_cross
-
-
- case "`(uname -sr) 2>/dev/null`" in
- "SunOS 5"*)
- SOLARIS=yes
- USE_MITSHM=yes
- ;;
- "Linux"*)
- LINUX=yes
- USE_MITSHM=yes
- ;;
- esac
-
- if test "$USE_MITSHM" = yes; then
- MITSHM_CPPFLAGS="-DMITSHM"
- fi
-
-
- if test "$GCC" = yes; then
- CFLAGS="$CFLAGS -Wall"
- if test "$SOLARIS" = yes; then
- CFLAGS="$CFLAGS -Wno-unknown-pragmas -Wno-implicit-int"
- fi
- fi
- if test "$GXX" = yes; then
- CXXFLAGS="$CXXFLAGS -Wall"
- if test "$SOLARIS" = yes; then
- CXXFLAGS="$CXXFLAGS -Wno-unknown-pragmas -Wno-implicit-int -fpermissive"
- fi
- fi
-
- echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
- echo "configure:994: checking how to run the C++ preprocessor" >&5
- if test -z "$CXXCPP"; then
- if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_ext=C
- # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CXXCPP $CPPFLAGS'
- ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cxx_cross
- CXXCPP="${CXX-g++} -E"
- cat > conftest.$ac_ext <<EOF
- #line 1007 "configure"
- #include "confdefs.h"
- #include <stdlib.h>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
- { (eval echo configure:1012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- :
- else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CXXCPP=/lib/cpp
- fi
- rm -f conftest*
- ac_cv_prog_CXXCPP="$CXXCPP"
- ac_ext=C
- # CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
- ac_cpp='$CXXCPP $CPPFLAGS'
- ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
- ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
- cross_compiling=$ac_cv_prog_cxx_cross
- fi
- fi
- CXXCPP="$ac_cv_prog_CXXCPP"
- echo "$ac_t""$CXXCPP" 1>&6
-
- # If we find X, set shell vars x_includes and x_libraries to the
- # paths, otherwise set no_x=yes.
- # Uses ac_ vars as temps to allow command line to override cache and checks.
- # --without-x overrides everything else, but does not touch the cache.
- echo $ac_n "checking for X""... $ac_c" 1>&6
- echo "configure:1041: checking for X" >&5
-
- # Check whether --with-x or --without-x was given.
- if test "${with_x+set}" = set; then
- withval="$with_x"
- :
- fi
-
- # $have_x is `yes', `no', `disabled', or empty when we do not yet know.
- if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
- else
- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
- # Both variables are already set.
- have_x=yes
- else
- if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- # One or both of the vars are not set, and there is no cached value.
- ac_x_includes=NO ac_x_libraries=NO
- rm -fr conftestdir
- if mkdir conftestdir; then
- cd conftestdir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
- cat > Imakefile <<'EOF'
- acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
- EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
- test -f $ac_im_libdir/libX11.$ac_extension; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case "$ac_im_incroot" in
- /usr/include) ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
- esac
- case "$ac_im_usrlibdir" in
- /usr/lib | /lib) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
- esac
- fi
- cd ..
- rm -fr conftestdir
- fi
-
- if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
- # First, try using that file with no special directory specified.
- cat > conftest.$ac_ext <<EOF
- #line 1103 "configure"
- #include "confdefs.h"
- #include <$x_direct_test_include>
- EOF
- ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
- { (eval echo configure:1108: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
- ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
- if test -z "$ac_err"; then
- rm -rf conftest*
- # We can compile using X headers with no special include directory.
- ac_x_includes=
- else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- # Look for the header file in a standard set of common directories.
- # Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done
- fi
- rm -f conftest*
- fi # $ac_x_includes = NO
-
- if test "$ac_x_libraries" = NO; then
- # Check for the libraries.
-
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1177 "configure"
- #include "confdefs.h"
-
- int main() {
- ${x_direct_test_function}()
- ; return 0; }
- EOF
- if { (eval echo configure:1184: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
- # We can link X programs with no special library path.
- ac_x_libraries=
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
- # First see if replacing the include by lib works.
- # Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
- /usr/X11/lib \
- /usr/X11R6/lib \
- /usr/X11R5/lib \
- /usr/X11R4/lib \
- \
- /usr/lib/X11 \
- /usr/lib/X11R6 \
- /usr/lib/X11R5 \
- /usr/lib/X11R4 \
- \
- /usr/local/X11/lib \
- /usr/local/X11R6/lib \
- /usr/local/X11R5/lib \
- /usr/local/X11R4/lib \
- \
- /usr/local/lib/X11 \
- /usr/local/lib/X11R6 \
- /usr/local/lib/X11R5 \
- /usr/local/lib/X11R4 \
- \
- /usr/X386/lib \
- /usr/x386/lib \
- /usr/XFree86/lib/X11 \
- \
- /usr/lib \
- /usr/local/lib \
- /usr/unsupported/lib \
- /usr/athena/lib \
- /usr/local/x11r5/lib \
- /usr/lpp/Xamples/lib \
- /lib/usr/lib/X11 \
- \
- /usr/openwin/lib \
- /usr/openwin/share/lib \
- ; \
- do
- for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
- done
- fi
- rm -f conftest*
- fi # $ac_x_libraries = NO
-
- if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
- # Didn't find X anywhere. Cache the known absence of X.
- ac_cv_have_x="have_x=no"
- else
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
- fi
- fi
- fi
- eval "$ac_cv_have_x"
- fi # $with_x != no
-
- if test "$have_x" != yes; then
- echo "$ac_t""$have_x" 1>&6
- no_x=yes
- else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
- fi
-
- if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
- cat >> confdefs.h <<\EOF
- #define X_DISPLAY_MISSING 1
- EOF
-
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
- else
- if test -n "$x_includes"; then
- X_CFLAGS="$X_CFLAGS -I$x_includes"
- fi
-
- # It would also be nice to do this for all -L options, not just this one.
- if test -n "$x_libraries"; then
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
- case "`(uname -sr) 2>/dev/null`" in
- "SunOS 5"*)
- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
- echo "configure:1290: checking whether -R must be followed by a space" >&5
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
- cat > conftest.$ac_ext <<EOF
- #line 1293 "configure"
- #include "confdefs.h"
-
- int main() {
-
- ; return 0; }
- EOF
- if { (eval echo configure:1300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_nospace=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_nospace=no
- fi
- rm -f conftest*
- if test $ac_R_nospace = yes; then
- echo "$ac_t""no" 1>&6
- X_LIBS="$X_LIBS -R$x_libraries"
- else
- LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat > conftest.$ac_ext <<EOF
- #line 1316 "configure"
- #include "confdefs.h"
-
- int main() {
-
- ; return 0; }
- EOF
- if { (eval echo configure:1323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_space=yes
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_space=no
- fi
- rm -f conftest*
- if test $ac_R_space = yes; then
- echo "$ac_t""yes" 1>&6
- X_LIBS="$X_LIBS -R $x_libraries"
- else
- echo "$ac_t""neither works" 1>&6
- fi
- fi
- LIBS="$ac_xsave_LIBS"
- esac
- fi
-
- # Check for system-dependent libraries X programs must link with.
- # Do this before checking for the system-independent R6 libraries
- # (-lICE), since we may need -lsocket or whatever for X linking.
-
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
- # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And karl@cs.umb.edu says
- # the Alpha needs dnet_stub (dnet does not exist).
- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
- echo "configure:1355: checking for dnet_ntoa in -ldnet" >&5
- ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_save_LIBS="$LIBS"
- LIBS="-ldnet $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1363 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char dnet_ntoa();
-
- int main() {
- dnet_ntoa()
- ; return 0; }
- EOF
- if { (eval echo configure:1377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
-
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
- else
- echo "$ac_t""no" 1>&6
- fi
-
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
- echo "configure:1399: checking for dnet_ntoa in -ldnet_stub" >&5
- ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_save_LIBS="$LIBS"
- LIBS="-ldnet_stub $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1407 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char dnet_ntoa();
-
- int main() {
- dnet_ntoa()
- ; return 0; }
- EOF
- if { (eval echo configure:1421: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
-
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
- else
- echo "$ac_t""no" 1>&6
- fi
-
- fi
-
- # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
- # to get the SysV transport functions.
- # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
- # needs -lnsl.
- # The nsl library prevents programs from opening the X display
- # on Irix 5.2, according to dickey@clark.net.
- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
- echo "configure:1450: checking for gethostbyname" >&5
- if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
- #line 1455 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname(); below. */
- #include <assert.h>
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char gethostbyname();
-
- int main() {
-
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
- choke me
- #else
- gethostbyname();
- #endif
-
- ; return 0; }
- EOF
- if { (eval echo configure:1481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=no"
- fi
- rm -f conftest*
- fi
-
- if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
- else
- echo "$ac_t""no" 1>&6
- fi
-
- if test $ac_cv_func_gethostbyname = no; then
- echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
- echo "configure:1502: checking for gethostbyname in -lnsl" >&5
- ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_save_LIBS="$LIBS"
- LIBS="-lnsl $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1510 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char gethostbyname();
-
- int main() {
- gethostbyname()
- ; return 0; }
- EOF
- if { (eval echo configure:1524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
-
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
- else
- echo "$ac_t""no" 1>&6
- fi
-
- fi
-
- # lieder@skyler.mavd.honeywell.com says without -lsocket,
- # socket/setsockopt and other routines are undefined under SCO ODT
- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
- # on later versions), says simon@lia.di.epfl.ch: it contains
- # gethostby* variants that don't use the nameserver (or something).
- # -lsocket must be given before -lnsl if both are needed.
- # We assume that if connect needs -lnsl, so does gethostbyname.
- echo $ac_n "checking for connect""... $ac_c" 1>&6
- echo "configure:1554: checking for connect" >&5
- if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
- #line 1559 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect(); below. */
- #include <assert.h>
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char connect();
-
- int main() {
-
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_connect) || defined (__stub___connect)
- choke me
- #else
- connect();
- #endif
-
- ; return 0; }
- EOF
- if { (eval echo configure:1585: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_connect=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_connect=no"
- fi
- rm -f conftest*
- fi
-
- if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
- else
- echo "$ac_t""no" 1>&6
- fi
-
- if test $ac_cv_func_connect = no; then
- echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
- echo "configure:1606: checking for connect in -lsocket" >&5
- ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_save_LIBS="$LIBS"
- LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1614 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char connect();
-
- int main() {
- connect()
- ; return 0; }
- EOF
- if { (eval echo configure:1628: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
-
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
- else
- echo "$ac_t""no" 1>&6
- fi
-
- fi
-
- # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
- echo $ac_n "checking for remove""... $ac_c" 1>&6
- echo "configure:1652: checking for remove" >&5
- if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
- #line 1657 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char remove(); below. */
- #include <assert.h>
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char remove();
-
- int main() {
-
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_remove) || defined (__stub___remove)
- choke me
- #else
- remove();
- #endif
-
- ; return 0; }
- EOF
- if { (eval echo configure:1683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_remove=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_remove=no"
- fi
- rm -f conftest*
- fi
-
- if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
- else
- echo "$ac_t""no" 1>&6
- fi
-
- if test $ac_cv_func_remove = no; then
- echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
- echo "configure:1704: checking for remove in -lposix" >&5
- ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_save_LIBS="$LIBS"
- LIBS="-lposix $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1712 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char remove();
-
- int main() {
- remove()
- ; return 0; }
- EOF
- if { (eval echo configure:1726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
-
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
- else
- echo "$ac_t""no" 1>&6
- fi
-
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- echo $ac_n "checking for shmat""... $ac_c" 1>&6
- echo "configure:1750: checking for shmat" >&5
- if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
- #line 1755 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shmat(); below. */
- #include <assert.h>
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char shmat();
-
- int main() {
-
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_shmat) || defined (__stub___shmat)
- choke me
- #else
- shmat();
- #endif
-
- ; return 0; }
- EOF
- if { (eval echo configure:1781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_shmat=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_shmat=no"
- fi
- rm -f conftest*
- fi
-
- if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
- else
- echo "$ac_t""no" 1>&6
- fi
-
- if test $ac_cv_func_shmat = no; then
- echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
- echo "configure:1802: checking for shmat in -lipc" >&5
- ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_save_LIBS="$LIBS"
- LIBS="-lipc $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1810 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char shmat();
-
- int main() {
- shmat()
- ; return 0; }
- EOF
- if { (eval echo configure:1824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
-
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
- else
- echo "$ac_t""no" 1>&6
- fi
-
- fi
- fi
-
- # Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS="$LDFLAGS"
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
- # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
- echo "configure:1857: checking for IceConnectionNumber in -lICE" >&5
- ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
- if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- ac_save_LIBS="$LIBS"
- LIBS="-lICE $X_EXTRA_LIBS $LIBS"
- cat > conftest.$ac_ext <<EOF
- #line 1865 "configure"
- #include "confdefs.h"
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char IceConnectionNumber();
-
- int main() {
- IceConnectionNumber()
- ; return 0; }
- EOF
- if { (eval echo configure:1879: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
- fi
- rm -f conftest*
- LIBS="$ac_save_LIBS"
-
- fi
- if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
- else
- echo "$ac_t""no" 1>&6
- fi
-
- LDFLAGS="$ac_save_LDFLAGS"
-
- fi
-
-
- # Check whether --with-installed-zlib or --without-installed-zlib was given.
- if test "${with_installed_zlib+set}" = set; then
- withval="$with_installed_zlib"
- :
- fi
-
-
- if test "$with_installed_zlib" = yes; then
- echo "using installed zlib"
- ZLIB_LIB=-lz
- else
- ZLIB_DIR=zlib
- ZLIB_INCLUDE='-I$(top_srcdir)/zlib'
- ZLIB_LIB='$(top_srcdir)/zlib/libz.a'
- echo "configuring zlib..."
- (cd zlib; ./configure)
- echo "...done configuring zlib"
- fi
-
-
-
-
-
- echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6
- echo "configure:1928: checking for vsnprintf" >&5
- if eval "test \"`echo '$''{'ac_cv_func_vsnprintf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
- else
- cat > conftest.$ac_ext <<EOF
- #line 1933 "configure"
- #include "confdefs.h"
- /* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char vsnprintf(); below. */
- #include <assert.h>
- /* Override any gcc2 internal prototype to avoid an error. */
- #ifdef __cplusplus
- extern "C"
- #endif
- /* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
- char vsnprintf();
-
- int main() {
-
- /* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
- #if defined (__stub_vsnprintf) || defined (__stub___vsnprintf)
- choke me
- #else
- vsnprintf();
- #endif
-
- ; return 0; }
- EOF
- if { (eval echo configure:1959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_vsnprintf=yes"
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_vsnprintf=no"
- fi
- rm -f conftest*
- fi
-
- if eval "test \"`echo '$ac_cv_func_'vsnprintf`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- VSNPRINTF_DEFINE='-DHAVE_VSNPRINTF'
- else
- echo "$ac_t""no" 1>&6
- VSNPRINTF_DEFINE=
- fi
-
-
-
- echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
- echo "configure:1982: checking for socklen_t" >&5
- cat > conftest.$ac_ext <<EOF
- #line 1984 "configure"
- #include "confdefs.h"
- #include <sys/types.h>
- #include <sys/socket.h>
- int main() {
- socklen_t x;
- accept(0, 0, &x);
- ; return 0; }
- EOF
- if { (eval echo configure:1993: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
- SOCKLEN_T_DEFINE='-DVNC_SOCKLEN_T=socklen_t'
- else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""using int" 1>&6
- SOCKLEN_T_DEFINE='-DVNC_SOCKLEN_T=int'
- fi
- rm -f conftest*
-
-
- BOILERPLATE=boilerplate.mk
-
- if (sh -c "make --version" 2>/dev/null | grep GNU 2>&1 >/dev/null); then
- if sh -c "vncmkdepend" >/dev/null 2>&1; then
- BOILERPLATE="$BOILERPLATE:depend.mk"
- fi
- fi
-
- trap '' 1 2 15
- cat > confcache <<\EOF
- # This file is a shell script that caches the results of configure
- # tests run on this system so they can be shared between configure
- # scripts and configure runs. It is not useful on other systems.
- # If it contains results you don't want to keep, you may remove or edit it.
- #
- # By default, configure uses ./config.cache as the cache file,
- # creating it if it does not exist already. You can give configure
- # the --cache-file=FILE option to use a different cache file; that is
- # what configure does when it calls configure scripts in
- # subdirectories, so they share the cache.
- # Giving --cache-file=/dev/null disables caching, for debugging configure.
- # config.status only pays attention to the cache file if you give it the
- # --recheck option to rerun configure.
- #
- EOF
- # The following way of writing the cache mishandles newlines in values,
- # but we know of no workaround that is simple, portable, and efficient.
- # So, don't put newlines in cache variables' values.
- # Ultrix sh set writes to stderr and can't be redirected directly,
- # and sets the high bit in the cache file unless we assign to the vars.
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
- if cmp -s $cache_file confcache; then
- :
- else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
- fi
- rm -f confcache
-
- trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
- test "x$prefix" = xNONE && prefix=$ac_default_prefix
- # Let make expand exec_prefix.
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
- # Any assignment to VPATH causes Sun make to only execute
- # the first set of double-colon rules, so remove it if not needed.
- # If there is a colon in the path, we need to keep it.
- if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
- fi
-
- trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
- # Transform confdefs.h into DEFS.
- # Protect against shell expansion while executing Makefile rules.
- # Protect against Makefile macro expansion.
- cat > conftest.defs <<\EOF
- s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
- s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
- s%\[%\\&%g
- s%\]%\\&%g
- s%\$%$$%g
- EOF
- DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
- rm -f conftest.defs
-
-
- # Without the "./", some shells look in PATH for config.status.
- : ${CONFIG_STATUS=./config.status}
-
- echo creating $CONFIG_STATUS
- rm -f $CONFIG_STATUS
- cat > $CONFIG_STATUS <<EOF
- #! /bin/sh
- # Generated automatically by configure.
- # Run this file to recreate the current configuration.
- # This directory was configured as follows,
- # on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
- #
- # $0 $ac_configure_args
- #
- # Compiler output produced by configure, useful for debugging
- # configure, is in ./config.log if it exists.
-
- ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
- for ac_option
- do
- case "\$ac_option" in
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13"
- exit 0 ;;
- -help | --help | --hel | --he | --h)
- echo "\$ac_cs_usage"; exit 0 ;;
- *) echo "\$ac_cs_usage"; exit 1 ;;
- esac
- done
-
- ac_given_srcdir=$srcdir
-
- trap 'rm -fr `echo "Makefile:Makefile.in:$BOILERPLATE \
- rdr/Makefile:rdr/Makefile.in:$BOILERPLATE \
- network/Makefile:network/Makefile.in:$BOILERPLATE \
- Xregion/Makefile:Xregion/Makefile.in:$BOILERPLATE \
- rfb/Makefile:rfb/Makefile.in:$BOILERPLATE \
- tx/Makefile:tx/Makefile.in:$BOILERPLATE \
- x0vncserver/Makefile:x0vncserver/Makefile.in:$BOILERPLATE \
- vncviewer/Makefile:vncviewer/Makefile.in:$BOILERPLATE \
- vncconfig/Makefile:vncconfig/Makefile.in:$BOILERPLATE \
- vncpasswd/Makefile:vncpasswd/Makefile.in:$BOILERPLATE \
- " | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
- EOF
- cat >> $CONFIG_STATUS <<EOF
-
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
- $ac_vpsub
- $extrasub
- s%@SHELL@%$SHELL%g
- s%@CFLAGS@%$CFLAGS%g
- s%@CPPFLAGS@%$CPPFLAGS%g
- s%@CXXFLAGS@%$CXXFLAGS%g
- s%@FFLAGS@%$FFLAGS%g
- s%@DEFS@%$DEFS%g
- s%@LDFLAGS@%$LDFLAGS%g
- s%@LIBS@%$LIBS%g
- s%@exec_prefix@%$exec_prefix%g
- s%@prefix@%$prefix%g
- s%@program_transform_name@%$program_transform_name%g
- s%@bindir@%$bindir%g
- s%@sbindir@%$sbindir%g
- s%@libexecdir@%$libexecdir%g
- s%@datadir@%$datadir%g
- s%@sysconfdir@%$sysconfdir%g
- s%@sharedstatedir@%$sharedstatedir%g
- s%@localstatedir@%$localstatedir%g
- s%@libdir@%$libdir%g
- s%@includedir@%$includedir%g
- s%@oldincludedir@%$oldincludedir%g
- s%@infodir@%$infodir%g
- s%@mandir@%$mandir%g
- s%@CC@%$CC%g
- s%@CXX@%$CXX%g
- s%@RANLIB@%$RANLIB%g
- s%@SET_MAKE@%$SET_MAKE%g
- s%@MITSHM_CPPFLAGS@%$MITSHM_CPPFLAGS%g
- s%@CXXCPP@%$CXXCPP%g
- s%@X_CFLAGS@%$X_CFLAGS%g
- s%@X_PRE_LIBS@%$X_PRE_LIBS%g
- s%@X_LIBS@%$X_LIBS%g
- s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
- s%@ZLIB_DIR@%$ZLIB_DIR%g
- s%@ZLIB_INCLUDE@%$ZLIB_INCLUDE%g
- s%@ZLIB_LIB@%$ZLIB_LIB%g
- s%@VSNPRINTF_DEFINE@%$VSNPRINTF_DEFINE%g
- s%@SOCKLEN_T_DEFINE@%$SOCKLEN_T_DEFINE%g
-
- CEOF
- EOF
-
- cat >> $CONFIG_STATUS <<\EOF
-
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
- ac_file=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_cmds # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=""
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
- EOF
-
- cat >> $CONFIG_STATUS <<EOF
-
- CONFIG_FILES=\${CONFIG_FILES-"Makefile:Makefile.in:$BOILERPLATE \
- rdr/Makefile:rdr/Makefile.in:$BOILERPLATE \
- network/Makefile:network/Makefile.in:$BOILERPLATE \
- Xregion/Makefile:Xregion/Makefile.in:$BOILERPLATE \
- rfb/Makefile:rfb/Makefile.in:$BOILERPLATE \
- tx/Makefile:tx/Makefile.in:$BOILERPLATE \
- x0vncserver/Makefile:x0vncserver/Makefile.in:$BOILERPLATE \
- vncviewer/Makefile:vncviewer/Makefile.in:$BOILERPLATE \
- vncconfig/Makefile:vncconfig/Makefile.in:$BOILERPLATE \
- vncpasswd/Makefile:vncpasswd/Makefile.in:$BOILERPLATE \
- "}
- EOF
- cat >> $CONFIG_STATUS <<\EOF
- for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
-
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dir_suffix= ac_dots=
- fi
-
- case "$ac_given_srcdir" in
- .) srcdir=.
- if test -z "$ac_dots"; then top_srcdir=.
- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
- *) # Relative path.
- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
- top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
-
- echo creating "$ac_file"
- rm -f "$ac_file"
- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
- case "$ac_file" in
- *Makefile*) ac_comsub="1i\\
- # $configure_input" ;;
- *) ac_comsub= ;;
- esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- sed -e "$ac_comsub
- s%@configure_input@%$configure_input%g
- s%@srcdir@%$srcdir%g
- s%@top_srcdir@%$top_srcdir%g
- " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
- fi; done
- rm -f conftest.s*
-
- EOF
- cat >> $CONFIG_STATUS <<EOF
-
- EOF
- cat >> $CONFIG_STATUS <<\EOF
-
- exit 0
- EOF
- chmod +x $CONFIG_STATUS
- rm -fr confdefs* $ac_clean_files
- test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
|