+++ /dev/null
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-/**
- * Define a module along with a payload
- * @param module a name for the payload
- * @param payload a function to call with (require, exports, module) params
- */
-
-(function() {
-
-var global = (function() {
- return this;
-})();
-
-// if we find an existing require function use it.
-if (global.require && global.define) {
- require.packaged = true;
- return;
-}
-
-var _define = function(module, deps, payload) {
- if (typeof module !== 'string') {
- if (_define.original)
- _define.original.apply(window, arguments);
- else {
- console.error('dropping module because define wasn\'t a string.');
- console.trace();
- }
- return;
- }
-
- if (arguments.length == 2)
- payload = deps;
-
- if (!define.modules)
- define.modules = {};
-
- define.modules[module] = payload;
-};
-if (global.define)
- _define.original = global.define;
-
-global.define = _define;
-
-
-/**
- * Get at functionality define()ed using the function above
- */
-var _require = function(module, callback) {
- if (Object.prototype.toString.call(module) === "[object Array]") {
- var params = [];
- for (var i = 0, l = module.length; i < l; ++i) {
- var dep = lookup(module[i]);
- if (!dep && _require.original)
- return _require.original.apply(window, arguments);
- params.push(dep);
- }
- if (callback) {
- callback.apply(null, params);
- }
- }
- else if (typeof module === 'string') {
- var payload = lookup(module);
- if (!payload && _require.original)
- return _require.original.apply(window, arguments);
-
- if (callback) {
- callback();
- }
-
- return payload;
- }
- else {
- if (_require.original)
- return _require.original.apply(window, arguments);
- }
-};
-
-if (global.require)
- _require.original = global.require;
-
-global.require = _require;
-require.packaged = true;
-
-/**
- * Internal function to lookup moduleNames and resolve them by calling the
- * definition function if needed.
- */
-var lookup = function(moduleName) {
- var module = define.modules[moduleName];
- if (module == null) {
- console.error('Missing module: ' + moduleName);
- return null;
- }
-
- if (typeof module === 'function') {
- var exports = {};
- module(require, exports, { id: moduleName, uri: '' });
- // cache the resulting module object for next time
- define.modules[moduleName] = exports;
- return exports;
- }
-
- return module;
-};
-
-})();// vim:set ts=4 sts=4 sw=4 st:
-// -- kriskowal Kris Kowal Copyright (C) 2009-2010 MIT License
-// -- tlrobinson Tom Robinson Copyright (C) 2009-2010 MIT License (Narwhal Project)
-// -- dantman Daniel Friesen Copyright(C) 2010 XXX No License Specified
-// -- fschaefer Florian Schäfer Copyright (C) 2010 MIT License
-// -- Irakli Gozalishvili Copyright (C) 2010 MIT License
-
-/*!
- Copyright (c) 2009, 280 North Inc. http://280north.com/
- MIT License. http://github.com/280north/narwhal/blob/master/README.md
-*/
-
-define('pilot/fixoldbrowsers', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-/**
- * Brings an environment as close to ECMAScript 5 compliance
- * as is possible with the facilities of erstwhile engines.
- *
- * ES5 Draft
- * http://www.ecma-international.org/publications/files/drafts/tc39-2009-050.pdf
- *
- * NOTE: this is a draft, and as such, the URL is subject to change. If the
- * link is broken, check in the parent directory for the latest TC39 PDF.
- * http://www.ecma-international.org/publications/files/drafts/
- *
- * Previous ES5 Draft
- * http://www.ecma-international.org/publications/files/drafts/tc39-2009-025.pdf
- * This is a broken link to the previous draft of ES5 on which most of the
- * numbered specification references and quotes herein were taken. Updating
- * these references and quotes to reflect the new document would be a welcome
- * volunteer project.
- *
- * @module
- */
-
-/*whatsupdoc*/
-
-//
-// Function
-// ========
-//
-
-// ES-5 15.3.4.5
-// http://www.ecma-international.org/publications/files/drafts/tc39-2009-025.pdf
-
-if (!Function.prototype.bind) {
- var slice = Array.prototype.slice;
- Function.prototype.bind = function bind(that) { // .length is 1
- // 1. Let Target be the this value.
- var target = this;
- // 2. If IsCallable(Target) is false, throw a TypeError exception.
- // XXX this gets pretty close, for all intents and purposes, letting
- // some duck-types slide
- if (typeof target.apply !== "function" || typeof target.call !== "function")
- return new TypeError();
- // 3. Let A be a new (possibly empty) internal list of all of the
- // argument values provided after thisArg (arg1, arg2 etc), in order.
- var args = slice.call(arguments);
- // 4. Let F be a new native ECMAScript object.
- // 9. Set the [[Prototype]] internal property of F to the standard
- // built-in Function prototype object as specified in 15.3.3.1.
- // 10. Set the [[Call]] internal property of F as described in
- // 15.3.4.5.1.
- // 11. Set the [[Construct]] internal property of F as described in
- // 15.3.4.5.2.
- // 12. Set the [[HasInstance]] internal property of F as described in
- // 15.3.4.5.3.
- // 13. The [[Scope]] internal property of F is unused and need not
- // exist.
- var bound = function bound() {
-
- if (this instanceof bound) {
- // 15.3.4.5.2 [[Construct]]
- // When the [[Construct]] internal method of a function object,
- // F that was created using the bind function is called with a
- // list of arguments ExtraArgs the following steps are taken:
- // 1. Let target be the value of F's [[TargetFunction]]
- // internal property.
- // 2. If target has no [[Construct]] internal method, a
- // TypeError exception is thrown.
- // 3. Let boundArgs be the value of F's [[BoundArgs]] internal
- // property.
- // 4. Let args be a new list containing the same values as the
- // list boundArgs in the same order followed by the same
- // values as the list ExtraArgs in the same order.
-
- var self = Object.create(target.prototype);
- target.apply(self, args.concat(slice.call(arguments)));
- return self;
-
- } else {
- // 15.3.4.5.1 [[Call]]
- // When the [[Call]] internal method of a function object, F,
- // which was created using the bind function is called with a
- // this value and a list of arguments ExtraArgs the following
- // steps are taken:
- // 1. Let boundArgs be the value of F's [[BoundArgs]] internal
- // property.
- // 2. Let boundThis be the value of F's [[BoundThis]] internal
- // property.
- // 3. Let target be the value of F's [[TargetFunction]] internal
- // property.
- // 4. Let args be a new list containing the same values as the list
- // boundArgs in the same order followed by the same values as
- // the list ExtraArgs in the same order. 5. Return the
- // result of calling the [[Call]] internal method of target
- // providing boundThis as the this value and providing args
- // as the arguments.
-
- // equiv: target.call(this, ...boundArgs, ...args)
- return target.call.apply(
- target,
- args.concat(slice.call(arguments))
- );
-
- }
-
- };
- bound.length = (
- // 14. If the [[Class]] internal property of Target is "Function", then
- typeof target === "function" ?
- // a. Let L be the length property of Target minus the length of A.
- // b. Set the length own property of F to either 0 or L, whichever is larger.
- Math.max(target.length - args.length, 0) :
- // 15. Else set the length own property of F to 0.
- 0
- )
- // 16. The length own property of F is given attributes as specified in
- // 15.3.5.1.
- // TODO
- // 17. Set the [[Extensible]] internal property of F to true.
- // TODO
- // 18. Call the [[DefineOwnProperty]] internal method of F with
- // arguments "caller", PropertyDescriptor {[[Value]]: null,
- // [[Writable]]: false, [[Enumerable]]: false, [[Configurable]]:
- // false}, and false.
- // TODO
- // 19. Call the [[DefineOwnProperty]] internal method of F with
- // arguments "arguments", PropertyDescriptor {[[Value]]: null,
- // [[Writable]]: false, [[Enumerable]]: false, [[Configurable]]:
- // false}, and false.
- // TODO
- // NOTE Function objects created using Function.prototype.bind do not
- // have a prototype property.
- // XXX can't delete it in pure-js.
- return bound;
- };
-}
-
-// Shortcut to an often accessed properties, in order to avoid multiple
-// dereference that costs universally.
-// _Please note: Shortcuts are defined after `Function.prototype.bind` as we
-// us it in defining shortcuts.
-var call = Function.prototype.call;
-var prototypeOfArray = Array.prototype;
-var prototypeOfObject = Object.prototype;
-var owns = call.bind(prototypeOfObject.hasOwnProperty);
-
-var defineGetter, defineSetter, lookupGetter, lookupSetter, supportsAccessors;
-// If JS engine supports accessors creating shortcuts.
-if ((supportsAccessors = owns(prototypeOfObject, '__defineGetter__'))) {
- defineGetter = call.bind(prototypeOfObject.__defineGetter__);
- defineSetter = call.bind(prototypeOfObject.__defineSetter__);
- lookupGetter = call.bind(prototypeOfObject.__lookupGetter__);
- lookupSetter = call.bind(prototypeOfObject.__lookupSetter__);
-}
-
-
-//
-// Array
-// =====
-//
-
-// ES5 15.4.3.2
-if (!Array.isArray) {
- Array.isArray = function isArray(obj) {
- return Object.prototype.toString.call(obj) === "[object Array]";
- };
-}
-
-// ES5 15.4.4.18
-if (!Array.prototype.forEach) {
- Array.prototype.forEach = function forEach(block, thisObject) {
- var len = +this.length;
- for (var i = 0; i < len; i++) {
- if (i in this) {
- block.call(thisObject, this[i], i, this);
- }
- }
- };
-}
-
-// ES5 15.4.4.19
-// https://developer.mozilla.org/en/Core_JavaScript_1.5_Reference/Objects/Array/map
-if (!Array.prototype.map) {
- Array.prototype.map = function map(fun /*, thisp*/) {
- var len = +this.length;
- if (typeof fun !== "function")
- throw new TypeError();
-
- var res = new Array(len);
- var thisp = arguments[1];
- for (var i = 0; i < len; i++) {
- if (i in this)
- res[i] = fun.call(thisp, this[i], i, this);
- }
-
- return res;
- };
-}
-
-// ES5 15.4.4.20
-if (!Array.prototype.filter) {
- Array.prototype.filter = function filter(block /*, thisp */) {
- var values = [];
- var thisp = arguments[1];
- for (var i = 0; i < this.length; i++)
- if (block.call(thisp, this[i]))
- values.push(this[i]);
- return values;
- };
-}
-
-// ES5 15.4.4.16
-if (!Array.prototype.every) {
- Array.prototype.every = function every(block /*, thisp */) {
- var thisp = arguments[1];
- for (var i = 0; i < this.length; i++)
- if (!block.call(thisp, this[i]))
- return false;
- return true;
- };
-}
-
-// ES5 15.4.4.17
-if (!Array.prototype.some) {
- Array.prototype.some = function some(block /*, thisp */) {
- var thisp = arguments[1];
- for (var i = 0; i < this.length; i++)
- if (block.call(thisp, this[i]))
- return true;
- return false;
- };
-}
-
-// ES5 15.4.4.21
-// https://developer.mozilla.org/en/Core_JavaScript_1.5_Reference/Objects/Array/reduce
-if (!Array.prototype.reduce) {
- Array.prototype.reduce = function reduce(fun /*, initial*/) {
- var len = +this.length;
- if (typeof fun !== "function")
- throw new TypeError();
-
- // no value to return if no initial value and an empty array
- if (len === 0 && arguments.length === 1)
- throw new TypeError();
-
- var i = 0;
- if (arguments.length >= 2) {
- var rv = arguments[1];
- } else {
- do {
- if (i in this) {
- rv = this[i++];
- break;
- }
-
- // if array contains no values, no initial value to return
- if (++i >= len)
- throw new TypeError();
- } while (true);
- }
-
- for (; i < len; i++) {
- if (i in this)
- rv = fun.call(null, rv, this[i], i, this);
- }
-
- return rv;
- };
-}
-
-// ES5 15.4.4.22
-// https://developer.mozilla.org/en/Core_JavaScript_1.5_Reference/Objects/Array/reduceRight
-if (!Array.prototype.reduceRight) {
- Array.prototype.reduceRight = function reduceRight(fun /*, initial*/) {
- var len = +this.length;
- if (typeof fun !== "function")
- throw new TypeError();
-
- // no value to return if no initial value, empty array
- if (len === 0 && arguments.length === 1)
- throw new TypeError();
-
- var i = len - 1;
- if (arguments.length >= 2) {
- var rv = arguments[1];
- } else {
- do {
- if (i in this) {
- rv = this[i--];
- break;
- }
-
- // if array contains no values, no initial value to return
- if (--i < 0)
- throw new TypeError();
- } while (true);
- }
-
- for (; i >= 0; i--) {
- if (i in this)
- rv = fun.call(null, rv, this[i], i, this);
- }
-
- return rv;
- };
-}
-
-// ES5 15.4.4.14
-if (!Array.prototype.indexOf) {
- Array.prototype.indexOf = function indexOf(value /*, fromIndex */ ) {
- var length = this.length;
- if (!length)
- return -1;
- var i = arguments[1] || 0;
- if (i >= length)
- return -1;
- if (i < 0)
- i += length;
- for (; i < length; i++) {
- if (!owns(this, i))
- continue;
- if (value === this[i])
- return i;
- }
- return -1;
- };
-}
-
-// ES5 15.4.4.15
-if (!Array.prototype.lastIndexOf) {
- Array.prototype.lastIndexOf = function lastIndexOf(value /*, fromIndex */) {
- var length = this.length;
- if (!length)
- return -1;
- var i = arguments[1] || length;
- if (i < 0)
- i += length;
- i = Math.min(i, length - 1);
- for (; i >= 0; i--) {
- if (!owns(this, i))
- continue;
- if (value === this[i])
- return i;
- }
- return -1;
- };
-}
-
-//
-// Object
-// ======
-//
-
-// ES5 15.2.3.2
-if (!Object.getPrototypeOf) {
- // https://github.com/kriskowal/es5-shim/issues#issue/2
- // http://ejohn.org/blog/objectgetprototypeof/
- // recommended by fschaefer on github
- Object.getPrototypeOf = function getPrototypeOf(object) {
- return object.__proto__ || object.constructor.prototype;
- // or undefined if not available in this engine
- };
-}
-
-// ES5 15.2.3.3
-if (!Object.getOwnPropertyDescriptor) {
- var ERR_NON_OBJECT = "Object.getOwnPropertyDescriptor called on a " +
- "non-object: ";
- Object.getOwnPropertyDescriptor = function getOwnPropertyDescriptor(object, property) {
- if ((typeof object !== "object" && typeof object !== "function") || object === null)
- throw new TypeError(ERR_NON_OBJECT + object);
- // If object does not owns property return undefined immediately.
- if (!owns(object, property))
- return undefined;
-
- var despriptor, getter, setter;
-
- // If object has a property then it's for sure both `enumerable` and
- // `configurable`.
- despriptor = { enumerable: true, configurable: true };
-
- // If JS engine supports accessor properties then property may be a
- // getter or setter.
- if (supportsAccessors) {
- // Unfortunately `__lookupGetter__` will return a getter even
- // if object has own non getter property along with a same named
- // inherited getter. To avoid misbehavior we temporary remove
- // `__proto__` so that `__lookupGetter__` will return getter only
- // if it's owned by an object.
- var prototype = object.__proto__;
- object.__proto__ = prototypeOfObject;
-
- var getter = lookupGetter(object, property);
- var setter = lookupSetter(object, property);
-
- // Once we have getter and setter we can put values back.
- object.__proto__ = prototype;
-
- if (getter || setter) {
- if (getter) descriptor.get = getter;
- if (setter) descriptor.set = setter;
-
- // If it was accessor property we're done and return here
- // in order to avoid adding `value` to the descriptor.
- return descriptor;
- }
- }
-
- // If we got this far we know that object has an own property that is
- // not an accessor so we set it as a value and return descriptor.
- descriptor.value = object[property];
- return descriptor;
- };
-}
-
-// ES5 15.2.3.4
-if (!Object.getOwnPropertyNames) {
- Object.getOwnPropertyNames = function getOwnPropertyNames(object) {
- return Object.keys(object);
- };
-}
-
-// ES5 15.2.3.5
-if (!Object.create) {
- Object.create = function create(prototype, properties) {
- var object;
- if (prototype === null) {
- object = { "__proto__": null };
- } else {
- if (typeof prototype !== "object")
- throw new TypeError("typeof prototype["+(typeof prototype)+"] != 'object'");
- var Type = function () {};
- Type.prototype = prototype;
- object = new Type();
- // IE has no built-in implementation of `Object.getPrototypeOf`
- // neither `__proto__`, but this manually setting `__proto__` will
- // guarantee that `Object.getPrototypeOf` will work as expected with
- // objects created using `Object.create`
- object.__proto__ = prototype;
- }
- if (typeof properties !== "undefined")
- Object.defineProperties(object, properties);
- return object;
- };
-}
-
-// ES5 15.2.3.6
-if (!Object.defineProperty) {
- var ERR_NON_OBJECT_DESCRIPTOR = "Property description must be an object: ";
- var ERR_NON_OBJECT_TARGET = "Object.defineProperty called on non-object: "
- var ERR_ACCESSORS_NOT_SUPPORTED = "getters & setters can not be defined " +
- "on this javascript engine";
-
- Object.defineProperty = function defineProperty(object, property, descriptor) {
- if (typeof object !== "object" && typeof object !== "function")
- throw new TypeError(ERR_NON_OBJECT_TARGET + object);
- if (typeof object !== "object" || object === null)
- throw new TypeError(ERR_NON_OBJECT_DESCRIPTOR + descriptor);
-
- // If it's a data property.
- if (owns(descriptor, "value")) {
- // fail silently if "writable", "enumerable", or "configurable"
- // are requested but not supported
- /*
- // alternate approach:
- if ( // can't implement these features; allow false but not true
- !(owns(descriptor, "writable") ? descriptor.writable : true) ||
- !(owns(descriptor, "enumerable") ? descriptor.enumerable : true) ||
- !(owns(descriptor, "configurable") ? descriptor.configurable : true)
- )
- throw new RangeError(
- "This implementation of Object.defineProperty does not " +
- "support configurable, enumerable, or writable."
- );
- */
-
- if (supportsAccessors && (lookupGetter(object, property) ||
- lookupSetter(object, property)))
- {
- // As accessors are supported only on engines implementing
- // `__proto__` we can safely override `__proto__` while defining
- // a property to make sure that we don't hit an inherited
- // accessor.
- var prototype = object.__proto__;
- object.__proto__ = prototypeOfObject;
- // Deleting a property anyway since getter / setter may be
- // defined on object itself.
- delete object[property];
- object[property] = descriptor.value;
- // Setting original `__proto__` back now.
- object.prototype;
- } else {
- object[property] = descriptor.value;
- }
- } else {
- if (!supportsAccessors)
- throw new TypeError(ERR_ACCESSORS_NOT_SUPPORTED);
- // If we got that far then getters and setters can be defined !!
- if (owns(descriptor, "get"))
- defineGetter(object, property, descriptor.get);
- if (owns(descriptor, "set"))
- defineSetter(object, property, descriptor.set);
- }
-
- return object;
- };
-}
-
-// ES5 15.2.3.7
-if (!Object.defineProperties) {
- Object.defineProperties = function defineProperties(object, properties) {
- for (var property in properties) {
- if (owns(properties, property))
- Object.defineProperty(object, property, properties[property]);
- }
- return object;
- };
-}
-
-// ES5 15.2.3.8
-if (!Object.seal) {
- Object.seal = function seal(object) {
- // this is misleading and breaks feature-detection, but
- // allows "securable" code to "gracefully" degrade to working
- // but insecure code.
- return object;
- };
-}
-
-// ES5 15.2.3.9
-if (!Object.freeze) {
- Object.freeze = function freeze(object) {
- // this is misleading and breaks feature-detection, but
- // allows "securable" code to "gracefully" degrade to working
- // but insecure code.
- return object;
- };
-}
-
-// detect a Rhino bug and patch it
-try {
- Object.freeze(function () {});
-} catch (exception) {
- Object.freeze = (function freeze(freezeObject) {
- return function freeze(object) {
- if (typeof object === "function") {
- return object;
- } else {
- return freezeObject(object);
- }
- };
- })(Object.freeze);
-}
-
-// ES5 15.2.3.10
-if (!Object.preventExtensions) {
- Object.preventExtensions = function preventExtensions(object) {
- // this is misleading and breaks feature-detection, but
- // allows "securable" code to "gracefully" degrade to working
- // but insecure code.
- return object;
- };
-}
-
-// ES5 15.2.3.11
-if (!Object.isSealed) {
- Object.isSealed = function isSealed(object) {
- return false;
- };
-}
-
-// ES5 15.2.3.12
-if (!Object.isFrozen) {
- Object.isFrozen = function isFrozen(object) {
- return false;
- };
-}
-
-// ES5 15.2.3.13
-if (!Object.isExtensible) {
- Object.isExtensible = function isExtensible(object) {
- return true;
- };
-}
-
-// ES5 15.2.3.14
-// http://whattheheadsaid.com/2010/10/a-safer-object-keys-compatibility-implementation
-if (!Object.keys) {
-
- var hasDontEnumBug = true,
- dontEnums = [
- 'toString',
- 'toLocaleString',
- 'valueOf',
- 'hasOwnProperty',
- 'isPrototypeOf',
- 'propertyIsEnumerable',
- 'constructor'
- ],
- dontEnumsLength = dontEnums.length;
-
- for (var key in {"toString": null})
- hasDontEnumBug = false;
-
- Object.keys = function keys(object) {
-
- if (
- typeof object !== "object" && typeof object !== "function"
- || object === null
- )
- throw new TypeError("Object.keys called on a non-object");
-
- var keys = [];
- for (var name in object) {
- if (owns(object, name)) {
- keys.push(name);
- }
- }
-
- if (hasDontEnumBug) {
- for (var i = 0, ii = dontEnumsLength; i < ii; i++) {
- var dontEnum = dontEnums[i];
- if (owns(object, dontEnum)) {
- keys.push(dontEnum);
- }
- }
- }
-
- return keys;
- };
-
-}
-
-//
-// Date
-// ====
-//
-
-// ES5 15.9.5.43
-// Format a Date object as a string according to a subset of the ISO-8601 standard.
-// Useful in Atom, among other things.
-if (!Date.prototype.toISOString) {
- Date.prototype.toISOString = function toISOString() {
- return (
- this.getUTCFullYear() + "-" +
- (this.getUTCMonth() + 1) + "-" +
- this.getUTCDate() + "T" +
- this.getUTCHours() + ":" +
- this.getUTCMinutes() + ":" +
- this.getUTCSeconds() + "Z"
- );
- }
-}
-
-// ES5 15.9.4.4
-if (!Date.now) {
- Date.now = function now() {
- return new Date().getTime();
- };
-}
-
-// ES5 15.9.5.44
-if (!Date.prototype.toJSON) {
- Date.prototype.toJSON = function toJSON(key) {
- // This function provides a String representation of a Date object for
- // use by JSON.stringify (15.12.3). When the toJSON method is called
- // with argument key, the following steps are taken:
-
- // 1. Let O be the result of calling ToObject, giving it the this
- // value as its argument.
- // 2. Let tv be ToPrimitive(O, hint Number).
- // 3. If tv is a Number and is not finite, return null.
- // XXX
- // 4. Let toISO be the result of calling the [[Get]] internal method of
- // O with argument "toISOString".
- // 5. If IsCallable(toISO) is false, throw a TypeError exception.
- if (typeof this.toISOString !== "function")
- throw new TypeError();
- // 6. Return the result of calling the [[Call]] internal method of
- // toISO with O as the this value and an empty argument list.
- return this.toISOString();
-
- // NOTE 1 The argument is ignored.
-
- // NOTE 2 The toJSON function is intentionally generic; it does not
- // require that its this value be a Date object. Therefore, it can be
- // transferred to other kinds of objects for use as a method. However,
- // it does require that any such object have a toISOString method. An
- // object is free to use the argument key to filter its
- // stringification.
- };
-}
-
-// 15.9.4.2 Date.parse (string)
-// 15.9.1.15 Date Time String Format
-// Date.parse
-// based on work shared by Daniel Friesen (dantman)
-// http://gist.github.com/303249
-if (isNaN(Date.parse("T00:00"))) {
- // XXX global assignment won't work in embeddings that use
- // an alternate object for the context.
- Date = (function(NativeDate) {
-
- // Date.length === 7
- var Date = function(Y, M, D, h, m, s, ms) {
- var length = arguments.length;
- if (this instanceof NativeDate) {
- var date = length === 1 && String(Y) === Y ? // isString(Y)
- // We explicitly pass it through parse:
- new NativeDate(Date.parse(Y)) :
- // We have to manually make calls depending on argument
- // length here
- length >= 7 ? new NativeDate(Y, M, D, h, m, s, ms) :
- length >= 6 ? new NativeDate(Y, M, D, h, m, s) :
- length >= 5 ? new NativeDate(Y, M, D, h, m) :
- length >= 4 ? new NativeDate(Y, M, D, h) :
- length >= 3 ? new NativeDate(Y, M, D) :
- length >= 2 ? new NativeDate(Y, M) :
- length >= 1 ? new NativeDate(Y) :
- new NativeDate();
- // Prevent mixups with unfixed Date object
- date.constructor = Date;
- return date;
- }
- return NativeDate.apply(this, arguments);
- };
-
- // 15.9.1.15 Date Time String Format
- var isoDateExpression = new RegExp("^" +
- "(?:" + // optional year-month-day
- "(" + // year capture
- "(?:[+-]\\d\\d)?" + // 15.9.1.15.1 Extended years
- "\\d\\d\\d\\d" + // four-digit year
- ")" +
- "(?:-" + // optional month-day
- "(\\d\\d)" + // month capture
- "(?:-" + // optional day
- "(\\d\\d)" + // day capture
- ")?" +
- ")?" +
- ")?" +
- "(?:T" + // hour:minute:second.subsecond
- "(\\d\\d)" + // hour capture
- ":(\\d\\d)" + // minute capture
- "(?::" + // optional :second.subsecond
- "(\\d\\d)" + // second capture
- "(?:\\.(\\d\\d\\d))?" + // milisecond capture
- ")?" +
- ")?" +
- "(?:" + // time zone
- "Z|" + // UTC capture
- "([+-])(\\d\\d):(\\d\\d)" + // timezone offset
- // capture sign, hour, minute
- ")?" +
- "$");
-
- // Copy any custom methods a 3rd party library may have added
- for (var key in NativeDate)
- Date[key] = NativeDate[key];
-
- // Copy "native" methods explicitly; they may be non-enumerable
- Date.now = NativeDate.now;
- Date.UTC = NativeDate.UTC;
- Date.prototype = NativeDate.prototype;
- Date.prototype.constructor = Date;
-
- // Upgrade Date.parse to handle the ISO dates we use
- // TODO review specification to ascertain whether it is
- // necessary to implement partial ISO date strings.
- Date.parse = function parse(string) {
- var match = isoDateExpression.exec(string);
- if (match) {
- match.shift(); // kill match[0], the full match
- // recognize times without dates before normalizing the
- // numeric values, for later use
- var timeOnly = match[0] === undefined;
- // parse numerics
- for (var i = 0; i < 10; i++) {
- // skip + or - for the timezone offset
- if (i === 7)
- continue;
- // Note: parseInt would read 0-prefix numbers as
- // octal. Number constructor or unary + work better
- // here:
- match[i] = +(match[i] || (i < 3 ? 1 : 0));
- // match[1] is the month. Months are 0-11 in JavaScript
- // Date objects, but 1-12 in ISO notation, so we
- // decrement.
- if (i === 1)
- match[i]--;
- }
- // if no year-month-date is provided, return a milisecond
- // quantity instead of a UTC date number value.
- if (timeOnly)
- return ((match[3] * 60 + match[4]) * 60 + match[5]) * 1000 + match[6];
-
- // account for an explicit time zone offset if provided
- var offset = (match[8] * 60 + match[9]) * 60 * 1000;
- if (match[6] === "-")
- offset = -offset;
-
- return NativeDate.UTC.apply(this, match.slice(0, 7)) + offset;
- }
- return NativeDate.parse.apply(this, arguments);
- };
-
- return Date;
- })(Date);
-}
-
-//
-// String
-// ======
-//
-
-// ES5 15.5.4.20
-if (!String.prototype.trim) {
- // http://blog.stevenlevithan.com/archives/faster-trim-javascript
- var trimBeginRegexp = /^\s\s*/;
- var trimEndRegexp = /\s\s*$/;
- String.prototype.trim = function trim() {
- return String(this).replace(trimBeginRegexp, '').replace(trimEndRegexp, '');
- };
-}
-
-});/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Kevin Dangoor (kdangoor@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/ace', ['require', 'exports', 'module' , 'pilot/index', 'pilot/fixoldbrowsers', 'pilot/plugin_manager', 'pilot/dom', 'pilot/event', 'ace/editor', 'ace/edit_session', 'ace/undomanager', 'ace/virtual_renderer', 'ace/theme/textmate', 'pilot/environment'], function(require, exports, module) {
-
- require("pilot/index");
- require("pilot/fixoldbrowsers");
- var catalog = require("pilot/plugin_manager").catalog;
- catalog.registerPlugins([ "pilot/index" ]);
-
- var Dom = require("pilot/dom");
- var Event = require("pilot/event");
-
- var Editor = require("ace/editor").Editor;
- var EditSession = require("ace/edit_session").EditSession;
- var UndoManager = require("ace/undomanager").UndoManager;
- var Renderer = require("ace/virtual_renderer").VirtualRenderer;
-
- exports.edit = function(el) {
- if (typeof(el) == "string") {
- el = document.getElementById(el);
- }
-
- var doc = new EditSession(Dom.getInnerText(el));
- doc.setUndoManager(new UndoManager());
- el.innerHTML = '';
-
- var editor = new Editor(new Renderer(el, require("ace/theme/textmate")));
- editor.setSession(doc);
-
- var env = require("pilot/environment").create();
- catalog.startupPlugins({ env: env }).then(function() {
- env.document = doc;
- env.editor = editor;
- editor.resize();
- Event.addListener(window, "resize", function() {
- editor.resize();
- });
- el.env = env;
- });
- // Store env on editor such that it can be accessed later on from
- // the returned object.
- editor.env = env;
- return editor;
- };
-});/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Kevin Dangoor (kdangoor@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/index', ['require', 'exports', 'module' , 'pilot/fixoldbrowsers', 'pilot/types/basic', 'pilot/types/command', 'pilot/types/settings', 'pilot/commands/settings', 'pilot/commands/basic', 'pilot/settings/canon', 'pilot/canon'], function(require, exports, module) {
-
-exports.startup = function(data, reason) {
- require('pilot/fixoldbrowsers');
-
- require('pilot/types/basic').startup(data, reason);
- require('pilot/types/command').startup(data, reason);
- require('pilot/types/settings').startup(data, reason);
- require('pilot/commands/settings').startup(data, reason);
- require('pilot/commands/basic').startup(data, reason);
- // require('pilot/commands/history').startup(data, reason);
- require('pilot/settings/canon').startup(data, reason);
- require('pilot/canon').startup(data, reason);
-};
-
-exports.shutdown = function(data, reason) {
- require('pilot/types/basic').shutdown(data, reason);
- require('pilot/types/command').shutdown(data, reason);
- require('pilot/types/settings').shutdown(data, reason);
- require('pilot/commands/settings').shutdown(data, reason);
- require('pilot/commands/basic').shutdown(data, reason);
- // require('pilot/commands/history').shutdown(data, reason);
- require('pilot/settings/canon').shutdown(data, reason);
- require('pilot/canon').shutdown(data, reason);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- * Kevin Dangoor (kdangoor@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/types/basic', ['require', 'exports', 'module' , 'pilot/types'], function(require, exports, module) {
-
-var types = require("pilot/types");
-var Type = types.Type;
-var Conversion = types.Conversion;
-var Status = types.Status;
-
-/**
- * These are the basic types that we accept. They are vaguely based on the
- * Jetpack settings system (https://wiki.mozilla.org/Labs/Jetpack/JEP/24)
- * although clearly more restricted.
- *
- * <p>In addition to these types, Jetpack also accepts range, member, password
- * that we are thinking of adding.
- *
- * <p>This module probably should not be accessed directly, but instead used
- * through types.js
- */
-
-/**
- * 'text' is the default if no type is given.
- */
-var text = new Type();
-
-text.stringify = function(value) {
- return value;
-};
-
-text.parse = function(value) {
- if (typeof value != 'string') {
- throw new Error('non-string passed to text.parse()');
- }
- return new Conversion(value);
-};
-
-text.name = 'text';
-
-/**
- * We don't currently plan to distinguish between integers and floats
- */
-var number = new Type();
-
-number.stringify = function(value) {
- if (!value) {
- return null;
- }
- return '' + value;
-};
-
-number.parse = function(value) {
- if (typeof value != 'string') {
- throw new Error('non-string passed to number.parse()');
- }
-
- if (value.replace(/\s/g, '').length === 0) {
- return new Conversion(null, Status.INCOMPLETE, '');
- }
-
- var reply = new Conversion(parseInt(value, 10));
- if (isNaN(reply.value)) {
- reply.status = Status.INVALID;
- reply.message = 'Can\'t convert "' + value + '" to a number.';
- }
-
- return reply;
-};
-
-number.decrement = function(value) {
- return value - 1;
-};
-
-number.increment = function(value) {
- return value + 1;
-};
-
-number.name = 'number';
-
-/**
- * One of a known set of options
- */
-function SelectionType(typeSpec) {
- if (!Array.isArray(typeSpec.data) && typeof typeSpec.data !== 'function') {
- throw new Error('instances of SelectionType need typeSpec.data to be an array or function that returns an array:' + JSON.stringify(typeSpec));
- }
- Object.keys(typeSpec).forEach(function(key) {
- this[key] = typeSpec[key];
- }, this);
-};
-
-SelectionType.prototype = new Type();
-
-SelectionType.prototype.stringify = function(value) {
- return value;
-};
-
-SelectionType.prototype.parse = function(str) {
- if (typeof str != 'string') {
- throw new Error('non-string passed to parse()');
- }
- if (!this.data) {
- throw new Error('Missing data on selection type extension.');
- }
- var data = (typeof(this.data) === 'function') ? this.data() : this.data;
-
- // The matchedValue could be the boolean value false
- var hasMatched = false;
- var matchedValue;
- var completions = [];
- data.forEach(function(option) {
- if (str == option) {
- matchedValue = this.fromString(option);
- hasMatched = true;
- }
- else if (option.indexOf(str) === 0) {
- completions.push(this.fromString(option));
- }
- }, this);
-
- if (hasMatched) {
- return new Conversion(matchedValue);
- }
- else {
- // This is something of a hack it basically allows us to tell the
- // setting type to forget its last setting hack.
- if (this.noMatch) {
- this.noMatch();
- }
-
- if (completions.length > 0) {
- var msg = 'Possibilities' +
- (str.length === 0 ? '' : ' for \'' + str + '\'');
- return new Conversion(null, Status.INCOMPLETE, msg, completions);
- }
- else {
- var msg = 'Can\'t use \'' + str + '\'.';
- return new Conversion(null, Status.INVALID, msg, completions);
- }
- }
-};
-
-SelectionType.prototype.fromString = function(str) {
- return str;
-};
-
-SelectionType.prototype.decrement = function(value) {
- var data = (typeof this.data === 'function') ? this.data() : this.data;
- var index;
- if (value == null) {
- index = data.length - 1;
- }
- else {
- var name = this.stringify(value);
- var index = data.indexOf(name);
- index = (index === 0 ? data.length - 1 : index - 1);
- }
- return this.fromString(data[index]);
-};
-
-SelectionType.prototype.increment = function(value) {
- var data = (typeof this.data === 'function') ? this.data() : this.data;
- var index;
- if (value == null) {
- index = 0;
- }
- else {
- var name = this.stringify(value);
- var index = data.indexOf(name);
- index = (index === data.length - 1 ? 0 : index + 1);
- }
- return this.fromString(data[index]);
-};
-
-SelectionType.prototype.name = 'selection';
-
-/**
- * SelectionType is a base class for other types
- */
-exports.SelectionType = SelectionType;
-
-/**
- * true/false values
- */
-var bool = new SelectionType({
- name: 'bool',
- data: [ 'true', 'false' ],
- stringify: function(value) {
- return '' + value;
- },
- fromString: function(str) {
- return str === 'true' ? true : false;
- }
-});
-
-
-/**
- * A we don't know right now, but hope to soon.
- */
-function DeferredType(typeSpec) {
- if (typeof typeSpec.defer !== 'function') {
- throw new Error('Instances of DeferredType need typeSpec.defer to be a function that returns a type');
- }
- Object.keys(typeSpec).forEach(function(key) {
- this[key] = typeSpec[key];
- }, this);
-};
-
-DeferredType.prototype = new Type();
-
-DeferredType.prototype.stringify = function(value) {
- return this.defer().stringify(value);
-};
-
-DeferredType.prototype.parse = function(value) {
- return this.defer().parse(value);
-};
-
-DeferredType.prototype.decrement = function(value) {
- var deferred = this.defer();
- return (deferred.decrement ? deferred.decrement(value) : undefined);
-};
-
-DeferredType.prototype.increment = function(value) {
- var deferred = this.defer();
- return (deferred.increment ? deferred.increment(value) : undefined);
-};
-
-DeferredType.prototype.name = 'deferred';
-
-/**
- * DeferredType is a base class for other types
- */
-exports.DeferredType = DeferredType;
-
-
-/**
- * A set of objects of the same type
- */
-function ArrayType(typeSpec) {
- if (typeSpec instanceof Type) {
- this.subtype = typeSpec;
- }
- else if (typeof typeSpec === 'string') {
- this.subtype = types.getType(typeSpec);
- if (this.subtype == null) {
- throw new Error('Unknown array subtype: ' + typeSpec);
- }
- }
- else {
- throw new Error('Can\' handle array subtype');
- }
-};
-
-ArrayType.prototype = new Type();
-
-ArrayType.prototype.stringify = function(values) {
- // TODO: Check for strings with spaces and add quotes
- return values.join(' ');
-};
-
-ArrayType.prototype.parse = function(value) {
- return this.defer().parse(value);
-};
-
-ArrayType.prototype.name = 'array';
-
-/**
- * Registration and de-registration.
- */
-var isStarted = false;
-exports.startup = function() {
- if (isStarted) {
- return;
- }
- isStarted = true;
- types.registerType(text);
- types.registerType(number);
- types.registerType(bool);
- types.registerType(SelectionType);
- types.registerType(DeferredType);
- types.registerType(ArrayType);
-};
-
-exports.shutdown = function() {
- isStarted = false;
- types.unregisterType(text);
- types.unregisterType(number);
- types.unregisterType(bool);
- types.unregisterType(SelectionType);
- types.unregisterType(DeferredType);
- types.unregisterType(ArrayType);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/types', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-/**
- * Some types can detect validity, that is to say they can distinguish between
- * valid and invalid values.
- * TODO: Change these constants to be numbers for more performance?
- */
-var Status = {
- /**
- * The conversion process worked without any problem, and the value is
- * valid. There are a number of failure states, so the best way to check
- * for failure is (x !== Status.VALID)
- */
- VALID: {
- toString: function() { return 'VALID'; },
- valueOf: function() { return 0; }
- },
-
- /**
- * A conversion process failed, however it was noted that the string
- * provided to 'parse()' could be VALID by the addition of more characters,
- * so the typing may not be actually incorrect yet, just unfinished.
- * @see Status.INVALID
- */
- INCOMPLETE: {
- toString: function() { return 'INCOMPLETE'; },
- valueOf: function() { return 1; }
- },
-
- /**
- * The conversion process did not work, the value should be null and a
- * reason for failure should have been provided. In addition some completion
- * values may be available.
- * @see Status.INCOMPLETE
- */
- INVALID: {
- toString: function() { return 'INVALID'; },
- valueOf: function() { return 2; }
- },
-
- /**
- * A combined status is the worser of the provided statuses
- */
- combine: function(statuses) {
- var combined = Status.VALID;
- for (var i = 0; i < statuses.length; i++) {
- if (statuses[i].valueOf() > combined.valueOf()) {
- combined = statuses[i];
- }
- }
- return combined;
- }
-};
-exports.Status = Status;
-
-/**
- * The type.parse() method returns a Conversion to inform the user about not
- * only the result of a Conversion but also about what went wrong.
- * We could use an exception, and throw if the conversion failed, but that
- * seems to violate the idea that exceptions should be exceptional. Typos are
- * not. Also in order to store both a status and a message we'd still need
- * some sort of exception type...
- */
-function Conversion(value, status, message, predictions) {
- /**
- * The result of the conversion process. Will be null if status != VALID
- */
- this.value = value;
-
- /**
- * The status of the conversion.
- * @see Status
- */
- this.status = status || Status.VALID;
-
- /**
- * A message to go with the conversion. This could be present for any status
- * including VALID in the case where we want to note a warning for example.
- * I18N: On the one hand this nasty and un-internationalized, however with
- * a command line it is hard to know where to start.
- */
- this.message = message;
-
- /**
- * A array of strings which are the systems best guess at better inputs than
- * the one presented.
- * We generally expect there to be about 7 predictions (to match human list
- * comprehension ability) however it is valid to provide up to about 20,
- * or less. It is the job of the predictor to decide a smart cut-off.
- * For example if there are 4 very good matches and 4 very poor ones,
- * probably only the 4 very good matches should be presented.
- */
- this.predictions = predictions || [];
-}
-exports.Conversion = Conversion;
-
-/**
- * Most of our types are 'static' e.g. there is only one type of 'text', however
- * some types like 'selection' and 'deferred' are customizable. The basic
- * Type type isn't useful, but does provide documentation about what types do.
- */
-function Type() {
-};
-Type.prototype = {
- /**
- * Convert the given <tt>value</tt> to a string representation.
- * Where possible, there should be round-tripping between values and their
- * string representations.
- */
- stringify: function(value) { throw new Error("not implemented"); },
-
- /**
- * Convert the given <tt>str</tt> to an instance of this type.
- * Where possible, there should be round-tripping between values and their
- * string representations.
- * @return Conversion
- */
- parse: function(str) { throw new Error("not implemented"); },
-
- /**
- * The plug-in system, and other things need to know what this type is
- * called. The name alone is not enough to fully specify a type. Types like
- * 'selection' and 'deferred' need extra data, however this function returns
- * only the name, not the extra data.
- * <p>In old bespin, equality was based on the name. This may turn out to be
- * important in Ace too.
- */
- name: undefined,
-
- /**
- * If there is some concept of a higher value, return it,
- * otherwise return undefined.
- */
- increment: function(value) {
- return undefined;
- },
-
- /**
- * If there is some concept of a lower value, return it,
- * otherwise return undefined.
- */
- decrement: function(value) {
- return undefined;
- },
-
- /**
- * There is interesting information (like predictions) in a conversion of
- * nothing, the output of this can sometimes be customized.
- * @return Conversion
- */
- getDefault: function() {
- return this.parse('');
- }
-};
-exports.Type = Type;
-
-/**
- * Private registry of types
- * Invariant: types[name] = type.name
- */
-var types = {};
-
-/**
- * Add a new type to the list available to the system.
- * You can pass 2 things to this function - either an instance of Type, in
- * which case we return this instance when #getType() is called with a 'name'
- * that matches type.name.
- * Also you can pass in a constructor (i.e. function) in which case when
- * #getType() is called with a 'name' that matches Type.prototype.name we will
- * pass the typeSpec into this constructor. See #reconstituteType().
- */
-exports.registerType = function(type) {
- if (typeof type === 'object') {
- if (type instanceof Type) {
- if (!type.name) {
- throw new Error('All registered types must have a name');
- }
- types[type.name] = type;
- }
- else {
- throw new Error('Can\'t registerType using: ' + type);
- }
- }
- else if (typeof type === 'function') {
- if (!type.prototype.name) {
- throw new Error('All registered types must have a name');
- }
- types[type.prototype.name] = type;
- }
- else {
- throw new Error('Unknown type: ' + type);
- }
-};
-
-exports.registerTypes = function registerTypes(types) {
- Object.keys(types).forEach(function (name) {
- var type = types[name];
- type.name = name;
- exports.registerType(type);
- });
-};
-
-/**
- * Remove a type from the list available to the system
- */
-exports.deregisterType = function(type) {
- delete types[type.name];
-};
-
-/**
- * See description of #exports.registerType()
- */
-function reconstituteType(name, typeSpec) {
- if (name.substr(-2) === '[]') { // i.e. endsWith('[]')
- var subtypeName = name.slice(0, -2);
- return new types['array'](subtypeName);
- }
-
- var type = types[name];
- if (typeof type === 'function') {
- type = new type(typeSpec);
- }
- return type;
-}
-
-/**
- * Find a type, previously registered using #registerType()
- */
-exports.getType = function(typeSpec) {
- if (typeof typeSpec === 'string') {
- return reconstituteType(typeSpec);
- }
-
- if (typeof typeSpec === 'object') {
- if (!typeSpec.name) {
- throw new Error('Missing \'name\' member to typeSpec');
- }
- return reconstituteType(typeSpec.name, typeSpec);
- }
-
- throw new Error('Can\'t extract type from ' + typeSpec);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- * Kevin Dangoor (kdangoor@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/types/command', ['require', 'exports', 'module' , 'pilot/canon', 'pilot/types/basic', 'pilot/types'], function(require, exports, module) {
-
-var canon = require("pilot/canon");
-var SelectionType = require("pilot/types/basic").SelectionType;
-var types = require("pilot/types");
-
-
-/**
- * Select from the available commands
- */
-var command = new SelectionType({
- name: 'command',
- data: function() {
- return canon.getCommandNames();
- },
- stringify: function(command) {
- return command.name;
- },
- fromString: function(str) {
- return canon.getCommand(str);
- }
-});
-
-
-/**
- * Registration and de-registration.
- */
-exports.startup = function() {
- types.registerType(command);
-};
-
-exports.shutdown = function() {
- types.unregisterType(command);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/canon', ['require', 'exports', 'module' , 'pilot/console', 'pilot/stacktrace', 'pilot/oop', 'pilot/useragent', 'pilot/keys', 'pilot/event_emitter', 'pilot/typecheck', 'pilot/catalog', 'pilot/types', 'pilot/lang'], function(require, exports, module) {
-
-var console = require('pilot/console');
-var Trace = require('pilot/stacktrace').Trace;
-var oop = require('pilot/oop');
-var useragent = require('pilot/useragent');
-var keyUtil = require('pilot/keys');
-var EventEmitter = require('pilot/event_emitter').EventEmitter;
-var typecheck = require('pilot/typecheck');
-var catalog = require('pilot/catalog');
-var Status = require('pilot/types').Status;
-var types = require('pilot/types');
-var lang = require('pilot/lang');
-
-/*
-// TODO: this doesn't belong here - or maybe anywhere?
-var dimensionsChangedExtensionSpec = {
- name: 'dimensionsChanged',
- description: 'A dimensionsChanged is a way to be notified of ' +
- 'changes to the dimension of Skywriter'
-};
-exports.startup = function(data, reason) {
- catalog.addExtensionSpec(commandExtensionSpec);
-};
-exports.shutdown = function(data, reason) {
- catalog.removeExtensionSpec(commandExtensionSpec);
-};
-*/
-
-var commandExtensionSpec = {
- name: 'command',
- description: 'A command is a bit of functionality with optional ' +
- 'typed arguments which can do something small like moving ' +
- 'the cursor around the screen, or large like cloning a ' +
- 'project from VCS.',
- indexOn: 'name'
-};
-
-exports.startup = function(data, reason) {
- // TODO: this is probably all kinds of evil, but we need something working
- catalog.addExtensionSpec(commandExtensionSpec);
-};
-
-exports.shutdown = function(data, reason) {
- catalog.removeExtensionSpec(commandExtensionSpec);
-};
-
-/**
- * Manage a list of commands in the current canon
- */
-
-/**
- * A Command is a discrete action optionally with a set of ways to customize
- * how it happens. This is here for documentation purposes.
- * TODO: Document better
- */
-var thingCommand = {
- name: 'thing',
- description: 'thing is an example command',
- params: [{
- name: 'param1',
- description: 'an example parameter',
- type: 'text',
- defaultValue: null
- }],
- exec: function(env, args, request) {
- thing();
- }
-};
-
-/**
- * A lookup hash of our registered commands
- */
-var commands = {};
-
-/**
- * A lookup has for command key bindings that use a string as sender.
- */
-var commmandKeyBinding = {};
-
-/**
- * Array with command key bindings that use a function to determ the sender.
- */
-var commandKeyBindingFunc = { };
-
-function splitSafe(s, separator, limit, bLowerCase) {
- return (bLowerCase && s.toLowerCase() || s)
- .replace(/(?:^\s+|\n|\s+$)/g, "")
- .split(new RegExp("[\\s ]*" + separator + "[\\s ]*", "g"), limit || 999);
-}
-
-function parseKeys(keys, val, ret) {
- var key,
- hashId = 0,
- parts = splitSafe(keys, "\\-", null, true),
- i = 0,
- l = parts.length;
-
- for (; i < l; ++i) {
- if (keyUtil.KEY_MODS[parts[i]])
- hashId = hashId | keyUtil.KEY_MODS[parts[i]];
- else
- key = parts[i] || "-"; //when empty, the splitSafe removed a '-'
- }
-
- if (ret == null) {
- return {
- key: key,
- hashId: hashId
- }
- } else {
- (ret[hashId] || (ret[hashId] = {}))[key] = val;
- }
-}
-
-var platform = useragent.isMac ? "mac" : "win";
-function buildKeyHash(command) {
- var binding = command.bindKey,
- key = binding[platform],
- ckb = commmandKeyBinding,
- ckbf = commandKeyBindingFunc
-
- if (!binding.sender) {
- throw new Error('All key bindings must have a sender');
- }
- if (!binding.mac && binding.mac !== null) {
- throw new Error('All key bindings must have a mac key binding');
- }
- if (!binding.win && binding.win !== null) {
- throw new Error('All key bindings must have a windows key binding');
- }
- if(!binding[platform]) {
- // No keymapping for this platform.
- return;
- }
- if (typeof binding.sender == 'string') {
- var targets = splitSafe(binding.sender, "\\|", null, true);
- targets.forEach(function(target) {
- if (!ckb[target]) {
- ckb[target] = { };
- }
- key.split("|").forEach(function(keyPart) {
- parseKeys(keyPart, command, ckb[target]);
- });
- });
- } else if (typecheck.isFunction(binding.sender)) {
- var val = {
- command: command,
- sender: binding.sender
- };
-
- keyData = parseKeys(key);
- if (!ckbf[keyData.hashId]) {
- ckbf[keyData.hashId] = { };
- }
- if (!ckbf[keyData.hashId][keyData.key]) {
- ckbf[keyData.hashId][keyData.key] = [ val ];
- } else {
- ckbf[keyData.hashId][keyData.key].push(val);
- }
- } else {
- throw new Error('Key binding must have a sender that is a string or function');
- }
-}
-
-function findKeyCommand(env, sender, hashId, textOrKey) {
- // Convert keyCode to the string representation.
- if (typecheck.isNumber(textOrKey)) {
- textOrKey = keyUtil.keyCodeToString(textOrKey);
- }
-
- // Check bindings with functions as sender first.
- var bindFuncs = (commandKeyBindingFunc[hashId] || {})[textOrKey] || [];
- for (var i = 0; i < bindFuncs.length; i++) {
- if (bindFuncs[i].sender(env, sender, hashId, textOrKey)) {
- return bindFuncs[i].command;
- }
- }
-
- var ckbr = commmandKeyBinding[sender];
- return ckbr && ckbr[hashId] && ckbr[hashId][textOrKey];
-}
-
-function execKeyCommand(env, sender, hashId, textOrKey) {
- var command = findKeyCommand(env, sender, hashId, textOrKey);
- if (command) {
- return exec(command, env, sender, { });
- } else {
- return false;
- }
-}
-
-/**
- * A sorted list of command names, we regularly want them in order, so pre-sort
- */
-var commandNames = [];
-
-/**
- * This registration method isn't like other Ace registration methods because
- * it doesn't return a decorated command because there is no functional
- * decoration to be done.
- * TODO: Are we sure that in the future there will be no such decoration?
- */
-function addCommand(command) {
- if (!command.name) {
- throw new Error('All registered commands must have a name');
- }
- if (command.params == null) {
- command.params = [];
- }
- if (!Array.isArray(command.params)) {
- throw new Error('command.params must be an array in ' + command.name);
- }
- // Replace the type
- command.params.forEach(function(param) {
- if (!param.name) {
- throw new Error('In ' + command.name + ': all params must have a name');
- }
- upgradeType(command.name, param);
- }, this);
- commands[command.name] = command;
-
- if (command.bindKey) {
- buildKeyHash(command);
- }
-
- commandNames.push(command.name);
- commandNames.sort();
-};
-
-function upgradeType(name, param) {
- var lookup = param.type;
- param.type = types.getType(lookup);
- if (param.type == null) {
- throw new Error('In ' + name + '/' + param.name +
- ': can\'t find type for: ' + JSON.stringify(lookup));
- }
-}
-
-function removeCommand(command) {
- var name = (typeof command === 'string' ? command : command.name);
- command = commands[name];
- delete commands[name];
- lang.arrayRemove(commandNames, name);
-
- // exaustive search is a little bit brute force but since removeCommand is
- // not a performance critical operation this should be OK
- var ckb = commmandKeyBinding;
- for (var k1 in ckb) {
- for (var k2 in ckb[k1]) {
- for (var k3 in ckb[k1][k2]) {
- if (ckb[k1][k2][k3] == command)
- delete ckb[k1][k2][k3];
- }
- }
- }
-
- var ckbf = commandKeyBindingFunc;
- for (var k1 in ckbf) {
- for (var k2 in ckbf[k1]) {
- ckbf[k1][k2].forEach(function(cmd, i) {
- if (cmd.command == command) {
- ckbf[k1][k2].splice(i, 1);
- }
- })
- }
- }
-};
-
-function getCommand(name) {
- return commands[name];
-};
-
-function getCommandNames() {
- return commandNames;
-};
-
-/**
- * Default ArgumentProvider that is used if no ArgumentProvider is provided
- * by the command's sender.
- */
-function defaultArgsProvider(request, callback) {
- var args = request.args,
- params = request.command.params;
-
- for (var i = 0; i < params.length; i++) {
- var param = params[i];
-
- // If the parameter is already valid, then don't ask for it anymore.
- if (request.getParamStatus(param) != Status.VALID ||
- // Ask for optional parameters as well.
- param.defaultValue === null)
- {
- var paramPrompt = param.description;
- if (param.defaultValue === null) {
- paramPrompt += " (optional)";
- }
- var value = prompt(paramPrompt, param.defaultValue || "");
- // No value but required -> nope.
- if (!value) {
- callback();
- return;
- } else {
- args[param.name] = value;
- }
- }
- }
- callback();
-}
-
-/**
- * Entry point for keyboard accelerators or anything else that wants to execute
- * a command. A new request object is created and a check performed, if the
- * passed in arguments are VALID/INVALID or INCOMPLETE. If they are INCOMPLETE
- * the ArgumentProvider on the sender is called or otherwise the default
- * ArgumentProvider to get the still required arguments.
- * If they are valid (or valid after the ArgumentProvider is done), the command
- * is executed.
- *
- * @param command Either a command, or the name of one
- * @param env Current environment to execute the command in
- * @param sender String that should be the same as the senderObject stored on
- * the environment in env[sender]
- * @param args Arguments for the command
- * @param typed (Optional)
- */
-function exec(command, env, sender, args, typed) {
- if (typeof command === 'string') {
- command = commands[command];
- }
- if (!command) {
- // TODO: Should we complain more than returning false?
- return false;
- }
-
- var request = new Request({
- sender: sender,
- command: command,
- args: args || {},
- typed: typed
- });
-
- /**
- * Executes the command and ensures request.done is called on the request in
- * case it's not marked to be done already or async.
- */
- function execute() {
- command.exec(env, request.args, request);
-
- // If the request isn't asnync and isn't done, then make it done.
- if (!request.isAsync && !request.isDone) {
- request.done();
- }
- }
-
-
- if (request.getStatus() == Status.INVALID) {
- console.error("Canon.exec: Invalid parameter(s) passed to " +
- command.name);
- return false;
- }
- // If the request isn't complete yet, try to complete it.
- else if (request.getStatus() == Status.INCOMPLETE) {
- // Check if the sender has a ArgsProvider, otherwise use the default
- // build in one.
- var argsProvider;
- var senderObj = env[sender];
- if (!senderObj || !senderObj.getArgsProvider ||
- !(argsProvider = senderObj.getArgsProvider()))
- {
- argsProvider = defaultArgsProvider;
- }
-
- // Ask the paramProvider to complete the request.
- argsProvider(request, function() {
- if (request.getStatus() == Status.VALID) {
- execute();
- }
- });
- return true;
- } else {
- execute();
- return true;
- }
-};
-
-exports.removeCommand = removeCommand;
-exports.addCommand = addCommand;
-exports.getCommand = getCommand;
-exports.getCommandNames = getCommandNames;
-exports.findKeyCommand = findKeyCommand;
-exports.exec = exec;
-exports.execKeyCommand = execKeyCommand;
-exports.upgradeType = upgradeType;
-
-
-/**
- * We publish a 'output' event whenever new command begins output
- * TODO: make this more obvious
- */
-oop.implement(exports, EventEmitter);
-
-
-/**
- * Current requirements are around displaying the command line, and provision
- * of a 'history' command and cursor up|down navigation of history.
- * <p>Future requirements could include:
- * <ul>
- * <li>Multiple command lines
- * <li>The ability to recall key presses (i.e. requests with no output) which
- * will likely be needed for macro recording or similar
- * <li>The ability to store the command history either on the server or in the
- * browser local storage.
- * </ul>
- * <p>The execute() command doesn't really live here, except as part of that
- * last future requirement, and because it doesn't really have anywhere else to
- * live.
- */
-
-/**
- * The array of requests that wish to announce their presence
- */
-var requests = [];
-
-/**
- * How many requests do we store?
- */
-var maxRequestLength = 100;
-
-/**
- * To create an invocation, you need to do something like this (all the ctor
- * args are optional):
- * <pre>
- * var request = new Request({
- * command: command,
- * args: args,
- * typed: typed
- * });
- * </pre>
- * @constructor
- */
-function Request(options) {
- options = options || {};
-
- // Will be used in the keyboard case and the cli case
- this.command = options.command;
-
- // Will be used only in the cli case
- this.args = options.args;
- this.typed = options.typed;
-
- // Have we been initialized?
- this._begunOutput = false;
-
- this.start = new Date();
- this.end = null;
- this.completed = false;
- this.error = false;
-};
-
-oop.implement(Request.prototype, EventEmitter);
-
-/**
- * Return the status of a parameter on the request object.
- */
-Request.prototype.getParamStatus = function(param) {
- var args = this.args || {};
-
- // Check if there is already a value for this parameter.
- if (param.name in args) {
- // If there is no value set and then the value is VALID if it's not
- // required or INCOMPLETE if not set yet.
- if (args[param.name] == null) {
- if (param.defaultValue === null) {
- return Status.VALID;
- } else {
- return Status.INCOMPLETE;
- }
- }
-
- // Check if the parameter value is valid.
- var reply,
- // The passed in value when parsing a type is a string.
- argsValue = args[param.name].toString();
-
- // Type.parse can throw errors.
- try {
- reply = param.type.parse(argsValue);
- } catch (e) {
- return Status.INVALID;
- }
-
- if (reply.status != Status.VALID) {
- return reply.status;
- }
- }
- // Check if the param is marked as required.
- else if (param.defaultValue === undefined) {
- // The parameter is not set on the args object but it's required,
- // which means, things are invalid.
- return Status.INCOMPLETE;
- }
-
- return Status.VALID;
-}
-
-/**
- * Return the status of a parameter name on the request object.
- */
-Request.prototype.getParamNameStatus = function(paramName) {
- var params = this.command.params || [];
-
- for (var i = 0; i < params.length; i++) {
- if (params[i].name == paramName) {
- return this.getParamStatus(params[i]);
- }
- }
-
- throw "Parameter '" + paramName +
- "' not defined on command '" + this.command.name + "'";
-}
-
-/**
- * Checks if all required arguments are set on the request such that it can
- * get executed.
- */
-Request.prototype.getStatus = function() {
- var args = this.args || {},
- params = this.command.params;
-
- // If there are not parameters, then it's valid.
- if (!params || params.length == 0) {
- return Status.VALID;
- }
-
- var status = [];
- for (var i = 0; i < params.length; i++) {
- status.push(this.getParamStatus(params[i]));
- }
-
- return Status.combine(status);
-}
-
-/**
- * Lazy init to register with the history should only be done on output.
- * init() is expensive, and won't be used in the majority of cases
- */
-Request.prototype._beginOutput = function() {
- this._begunOutput = true;
- this.outputs = [];
-
- requests.push(this);
- // This could probably be optimized with some maths, but 99.99% of the
- // time we will only be off by one, and I'm feeling lazy.
- while (requests.length > maxRequestLength) {
- requests.shiftObject();
- }
-
- exports._dispatchEvent('output', { requests: requests, request: this });
-};
-
-/**
- * Sugar for:
- * <pre>request.error = true; request.done(output);</pre>
- */
-Request.prototype.doneWithError = function(content) {
- this.error = true;
- this.done(content);
-};
-
-/**
- * Declares that this function will not be automatically done when
- * the command exits
- */
-Request.prototype.async = function() {
- this.isAsync = true;
- if (!this._begunOutput) {
- this._beginOutput();
- }
-};
-
-/**
- * Complete the currently executing command with successful output.
- * @param output Either DOM node, an SproutCore element or something that
- * can be used in the content of a DIV to create a DOM node.
- */
-Request.prototype.output = function(content) {
- if (!this._begunOutput) {
- this._beginOutput();
- }
-
- if (typeof content !== 'string' && !(content instanceof Node)) {
- content = content.toString();
- }
-
- this.outputs.push(content);
- this.isDone = true;
- this._dispatchEvent('output', {});
-
- return this;
-};
-
-/**
- * All commands that do output must call this to indicate that the command
- * has finished execution.
- */
-Request.prototype.done = function(content) {
- this.completed = true;
- this.end = new Date();
- this.duration = this.end.getTime() - this.start.getTime();
-
- if (content) {
- this.output(content);
- }
-
- // Ensure to finish the request only once.
- if (!this.isDone) {
- this.isDone = true;
- this._dispatchEvent('output', {});
- }
-};
-exports.Request = Request;
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- * Patrick Walton (pwalton@mozilla.com)
- * Julian Viereck (jviereck@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-define('pilot/console', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-/**
- * This object represents a "safe console" object that forwards debugging
- * messages appropriately without creating a dependency on Firebug in Firefox.
- */
-
-var noop = function() {};
-
-// These are the functions that are available in Chrome 4/5, Safari 4
-// and Firefox 3.6. Don't add to this list without checking browser support
-var NAMES = [
- "assert", "count", "debug", "dir", "dirxml", "error", "group", "groupEnd",
- "info", "log", "profile", "profileEnd", "time", "timeEnd", "trace", "warn"
-];
-
-if (typeof(window) === 'undefined') {
- // We're in a web worker. Forward to the main thread so the messages
- // will show up.
- NAMES.forEach(function(name) {
- exports[name] = function() {
- var args = Array.prototype.slice.call(arguments);
- var msg = { op: 'log', method: name, args: args };
- postMessage(JSON.stringify(msg));
- };
- });
-} else {
- // For each of the console functions, copy them if they exist, stub if not
- NAMES.forEach(function(name) {
- if (window.console && window.console[name]) {
- exports[name] = Function.prototype.bind.call(window.console[name], window.console);
- } else {
- exports[name] = noop;
- }
- });
-}
-
-});
-define('pilot/stacktrace', ['require', 'exports', 'module' , 'pilot/useragent', 'pilot/console'], function(require, exports, module) {
-
-var ua = require("pilot/useragent");
-var console = require('pilot/console');
-
-// Changed to suit the specific needs of running within Skywriter
-
-// Domain Public by Eric Wendelin http://eriwen.com/ (2008)
-// Luke Smith http://lucassmith.name/ (2008)
-// Loic Dachary <loic@dachary.org> (2008)
-// Johan Euphrosine <proppy@aminche.com> (2008)
-// Øyvind Sean Kinsey http://kinsey.no/blog
-//
-// Information and discussions
-// http://jspoker.pokersource.info/skin/test-printstacktrace.html
-// http://eriwen.com/javascript/js-stack-trace/
-// http://eriwen.com/javascript/stacktrace-update/
-// http://pastie.org/253058
-// http://browsershots.org/http://jspoker.pokersource.info/skin/test-printstacktrace.html
-//
-
-//
-// guessFunctionNameFromLines comes from firebug
-//
-// Software License Agreement (BSD License)
-//
-// Copyright (c) 2007, Parakey Inc.
-// All rights reserved.
-//
-// Redistribution and use of this software in source and binary forms, with or without modification,
-// are permitted provided that the following conditions are met:
-//
-// * Redistributions of source code must retain the above
-// copyright notice, this list of conditions and the
-// following disclaimer.
-//
-// * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the
-// following disclaimer in the documentation and/or other
-// materials provided with the distribution.
-//
-// * Neither the name of Parakey Inc. nor the names of its
-// contributors may be used to endorse or promote products
-// derived from this software without specific prior
-// written permission of Parakey Inc.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
-// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-// FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
-// IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
-// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-
-/**
- * Different browsers create stack traces in different ways.
- * <strike>Feature</strike> Browser detection baby ;).
- */
-var mode = (function() {
-
- // We use SC's browser detection here to avoid the "break on error"
- // functionality provided by Firebug. Firebug tries to do the right
- // thing here and break, but it happens every time you load the page.
- // bug 554105
- if (ua.isGecko) {
- return 'firefox';
- } else if (ua.isOpera) {
- return 'opera';
- } else {
- return 'other';
- }
-
- // SC doesn't do any detection of Chrome at this time.
-
- // this is the original feature detection code that is used as a
- // fallback.
- try {
- (0)();
- } catch (e) {
- if (e.arguments) {
- return 'chrome';
- }
- if (e.stack) {
- return 'firefox';
- }
- if (window.opera && !('stacktrace' in e)) { //Opera 9-
- return 'opera';
- }
- }
- return 'other';
-})();
-
-/**
- *
- */
-function stringifyArguments(args) {
- for (var i = 0; i < args.length; ++i) {
- var argument = args[i];
- if (typeof argument == 'object') {
- args[i] = '#object';
- } else if (typeof argument == 'function') {
- args[i] = '#function';
- } else if (typeof argument == 'string') {
- args[i] = '"' + argument + '"';
- }
- }
- return args.join(',');
-}
-
-/**
- * Extract a stack trace from the format emitted by each browser.
- */
-var decoders = {
- chrome: function(e) {
- var stack = e.stack;
- if (!stack) {
- console.log(e);
- return [];
- }
- return stack.replace(/^.*?\n/, '').
- replace(/^.*?\n/, '').
- replace(/^.*?\n/, '').
- replace(/^[^\(]+?[\n$]/gm, '').
- replace(/^\s+at\s+/gm, '').
- replace(/^Object.<anonymous>\s*\(/gm, '{anonymous}()@').
- split('\n');
- },
-
- firefox: function(e) {
- var stack = e.stack;
- if (!stack) {
- console.log(e);
- return [];
- }
- // stack = stack.replace(/^.*?\n/, '');
- stack = stack.replace(/(?:\n@:0)?\s+$/m, '');
- stack = stack.replace(/^\(/gm, '{anonymous}(');
- return stack.split('\n');
- },
-
- // Opera 7.x and 8.x only!
- opera: function(e) {
- var lines = e.message.split('\n'), ANON = '{anonymous}',
- lineRE = /Line\s+(\d+).*?script\s+(http\S+)(?:.*?in\s+function\s+(\S+))?/i, i, j, len;
-
- for (i = 4, j = 0, len = lines.length; i < len; i += 2) {
- if (lineRE.test(lines[i])) {
- lines[j++] = (RegExp.$3 ? RegExp.$3 + '()@' + RegExp.$2 + RegExp.$1 : ANON + '()@' + RegExp.$2 + ':' + RegExp.$1) +
- ' -- ' +
- lines[i + 1].replace(/^\s+/, '');
- }
- }
-
- lines.splice(j, lines.length - j);
- return lines;
- },
-
- // Safari, Opera 9+, IE, and others
- other: function(curr) {
- var ANON = '{anonymous}', fnRE = /function\s*([\w\-$]+)?\s*\(/i, stack = [], j = 0, fn, args;
-
- var maxStackSize = 10;
- while (curr && stack.length < maxStackSize) {
- fn = fnRE.test(curr.toString()) ? RegExp.$1 || ANON : ANON;
- args = Array.prototype.slice.call(curr['arguments']);
- stack[j++] = fn + '(' + stringifyArguments(args) + ')';
-
- //Opera bug: if curr.caller does not exist, Opera returns curr (WTF)
- if (curr === curr.caller && window.opera) {
- //TODO: check for same arguments if possible
- break;
- }
- curr = curr.caller;
- }
- return stack;
- }
-};
-
-/**
- *
- */
-function NameGuesser() {
-}
-
-NameGuesser.prototype = {
-
- sourceCache: {},
-
- ajax: function(url) {
- var req = this.createXMLHTTPObject();
- if (!req) {
- return;
- }
- req.open('GET', url, false);
- req.setRequestHeader('User-Agent', 'XMLHTTP/1.0');
- req.send('');
- return req.responseText;
- },
-
- createXMLHTTPObject: function() {
- // Try XHR methods in order and store XHR factory
- var xmlhttp, XMLHttpFactories = [
- function() {
- return new XMLHttpRequest();
- }, function() {
- return new ActiveXObject('Msxml2.XMLHTTP');
- }, function() {
- return new ActiveXObject('Msxml3.XMLHTTP');
- }, function() {
- return new ActiveXObject('Microsoft.XMLHTTP');
- }
- ];
- for (var i = 0; i < XMLHttpFactories.length; i++) {
- try {
- xmlhttp = XMLHttpFactories[i]();
- // Use memoization to cache the factory
- this.createXMLHTTPObject = XMLHttpFactories[i];
- return xmlhttp;
- } catch (e) {}
- }
- },
-
- getSource: function(url) {
- if (!(url in this.sourceCache)) {
- this.sourceCache[url] = this.ajax(url).split('\n');
- }
- return this.sourceCache[url];
- },
-
- guessFunctions: function(stack) {
- for (var i = 0; i < stack.length; ++i) {
- var reStack = /{anonymous}\(.*\)@(\w+:\/\/([-\w\.]+)+(:\d+)?[^:]+):(\d+):?(\d+)?/;
- var frame = stack[i], m = reStack.exec(frame);
- if (m) {
- var file = m[1], lineno = m[4]; //m[7] is character position in Chrome
- if (file && lineno) {
- var functionName = this.guessFunctionName(file, lineno);
- stack[i] = frame.replace('{anonymous}', functionName);
- }
- }
- }
- return stack;
- },
-
- guessFunctionName: function(url, lineNo) {
- try {
- return this.guessFunctionNameFromLines(lineNo, this.getSource(url));
- } catch (e) {
- return 'getSource failed with url: ' + url + ', exception: ' + e.toString();
- }
- },
-
- guessFunctionNameFromLines: function(lineNo, source) {
- var reFunctionArgNames = /function ([^(]*)\(([^)]*)\)/;
- var reGuessFunction = /['"]?([0-9A-Za-z_]+)['"]?\s*[:=]\s*(function|eval|new Function)/;
- // Walk backwards from the first line in the function until we find the line which
- // matches the pattern above, which is the function definition
- var line = '', maxLines = 10;
- for (var i = 0; i < maxLines; ++i) {
- line = source[lineNo - i] + line;
- if (line !== undefined) {
- var m = reGuessFunction.exec(line);
- if (m) {
- return m[1];
- }
- else {
- m = reFunctionArgNames.exec(line);
- }
- if (m && m[1]) {
- return m[1];
- }
- }
- }
- return '(?)';
- }
-};
-
-var guesser = new NameGuesser();
-
-var frameIgnorePatterns = [
- /http:\/\/localhost:4020\/sproutcore.js:/
-];
-
-exports.ignoreFramesMatching = function(regex) {
- frameIgnorePatterns.push(regex);
-};
-
-/**
- * Create a stack trace from an exception
- * @param ex {Error} The error to create a stacktrace from (optional)
- * @param guess {Boolean} If we should try to resolve the names of anonymous functions
- */
-exports.Trace = function Trace(ex, guess) {
- this._ex = ex;
- this._stack = decoders[mode](ex);
-
- if (guess) {
- this._stack = guesser.guessFunctions(this._stack);
- }
-};
-
-/**
- * Log to the console a number of lines (default all of them)
- * @param lines {number} Maximum number of lines to wrote to console
- */
-exports.Trace.prototype.log = function(lines) {
- if (lines <= 0) {
- // You aren't going to have more lines in your stack trace than this
- // and it still fits in a 32bit integer
- lines = 999999999;
- }
-
- var printed = 0;
- for (var i = 0; i < this._stack.length && printed < lines; i++) {
- var frame = this._stack[i];
- var display = true;
- frameIgnorePatterns.forEach(function(regex) {
- if (regex.test(frame)) {
- display = false;
- }
- });
- if (display) {
- console.debug(frame);
- printed++;
- }
- }
-};
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/useragent', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var os = (navigator.platform.match(/mac|win|linux/i) || ["other"])[0].toLowerCase();
-var ua = navigator.userAgent;
-var av = navigator.appVersion;
-
-/** Is the user using a browser that identifies itself as Windows */
-exports.isWin = (os == "win");
-
-/** Is the user using a browser that identifies itself as Mac OS */
-exports.isMac = (os == "mac");
-
-/** Is the user using a browser that identifies itself as Linux */
-exports.isLinux = (os == "linux");
-
-exports.isIE = ! + "\v1";
-
-/** Is this Firefox or related? */
-exports.isGecko = exports.isMozilla = window.controllers && window.navigator.product === "Gecko";
-
-/** oldGecko == rev < 2.0 **/
-exports.isOldGecko = exports.isGecko && /rv\:1/.test(navigator.userAgent);
-
-/** Is this Opera */
-exports.isOpera = window.opera && Object.prototype.toString.call(window.opera) == "[object Opera]";
-
-/** Is the user using a browser that identifies itself as WebKit */
-exports.isWebKit = parseFloat(ua.split("WebKit/")[1]) || undefined;
-
-exports.isChrome = parseFloat(ua.split(" Chrome/")[1]) || undefined;
-
-exports.isAIR = ua.indexOf("AdobeAIR") >= 0;
-
-exports.isIPad = ua.indexOf("iPad") >= 0;
-
-/**
- * I hate doing this, but we need some way to determine if the user is on a Mac
- * The reason is that users have different expectations of their key combinations.
- *
- * Take copy as an example, Mac people expect to use CMD or APPLE + C
- * Windows folks expect to use CTRL + C
- */
-exports.OS = {
- LINUX: 'LINUX',
- MAC: 'MAC',
- WINDOWS: 'WINDOWS'
-};
-
-/**
- * Return an exports.OS constant
- */
-exports.getOS = function() {
- if (exports.isMac) {
- return exports.OS['MAC'];
- } else if (exports.isLinux) {
- return exports.OS['LINUX'];
- } else {
- return exports.OS['WINDOWS'];
- }
-};
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/oop', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-exports.inherits = (function() {
- var tempCtor = function() {};
- return function(ctor, superCtor) {
- tempCtor.prototype = superCtor.prototype;
- ctor.super_ = superCtor.prototype;
- ctor.prototype = new tempCtor();
- ctor.prototype.constructor = ctor;
- }
-}());
-
-exports.mixin = function(obj, mixin) {
- for (var key in mixin) {
- obj[key] = mixin[key];
- }
-};
-
-exports.implement = function(proto, mixin) {
- exports.mixin(proto, mixin);
-};
-
-});
-/*! @license
-==========================================================================
-SproutCore -- JavaScript Application Framework
-copyright 2006-2009, Sprout Systems Inc., Apple Inc. and contributors.
-
-Permission is hereby granted, free of charge, to any person obtaining a
-copy of this software and associated documentation files (the "Software"),
-to deal in the Software without restriction, including without limitation
-the rights to use, copy, modify, merge, publish, distribute, sublicense,
-and/or sell copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
-DEALINGS IN THE SOFTWARE.
-
-SproutCore and the SproutCore logo are trademarks of Sprout Systems, Inc.
-
-For more information about SproutCore, visit http://www.sproutcore.com
-
-
-==========================================================================
-@license */
-
-// Most of the following code is taken from SproutCore with a few changes.
-
-define('pilot/keys', ['require', 'exports', 'module' , 'pilot/oop'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-
-/**
- * Helper functions and hashes for key handling.
- */
-var Keys = (function() {
- var ret = {
- MODIFIER_KEYS: {
- 16: 'Shift', 17: 'Ctrl', 18: 'Alt', 224: 'Meta'
- },
-
- KEY_MODS: {
- "ctrl": 1, "alt": 2, "option" : 2,
- "shift": 4, "meta": 8, "command": 8
- },
-
- FUNCTION_KEYS : {
- 8 : "Backspace",
- 9 : "Tab",
- 13 : "Return",
- 19 : "Pause",
- 27 : "Esc",
- 32 : "Space",
- 33 : "PageUp",
- 34 : "PageDown",
- 35 : "End",
- 36 : "Home",
- 37 : "Left",
- 38 : "Up",
- 39 : "Right",
- 40 : "Down",
- 44 : "Print",
- 45 : "Insert",
- 46 : "Delete",
- 112: "F1",
- 113: "F2",
- 114: "F3",
- 115: "F4",
- 116: "F5",
- 117: "F6",
- 118: "F7",
- 119: "F8",
- 120: "F9",
- 121: "F10",
- 122: "F11",
- 123: "F12",
- 144: "Numlock",
- 145: "Scrolllock"
- },
-
- PRINTABLE_KEYS: {
- 32: ' ', 48: '0', 49: '1', 50: '2', 51: '3', 52: '4', 53: '5',
- 54: '6', 55: '7', 56: '8', 57: '9', 59: ';', 61: '=', 65: 'a',
- 66: 'b', 67: 'c', 68: 'd', 69: 'e', 70: 'f', 71: 'g', 72: 'h',
- 73: 'i', 74: 'j', 75: 'k', 76: 'l', 77: 'm', 78: 'n', 79: 'o',
- 80: 'p', 81: 'q', 82: 'r', 83: 's', 84: 't', 85: 'u', 86: 'v',
- 87: 'w', 88: 'x', 89: 'y', 90: 'z', 107: '+', 109: '-', 110: '.',
- 188: ',', 190: '.', 191: '/', 192: '`', 219: '[', 220: '\\',
- 221: ']', 222: '\"'
- }
- };
-
- // A reverse map of FUNCTION_KEYS
- for (i in ret.FUNCTION_KEYS) {
- var name = ret.FUNCTION_KEYS[i].toUpperCase();
- ret[name] = parseInt(i, 10);
- }
-
- // Add the MODIFIER_KEYS, FUNCTION_KEYS and PRINTABLE_KEYS to the KEY
- // variables as well.
- oop.mixin(ret, ret.MODIFIER_KEYS);
- oop.mixin(ret, ret.PRINTABLE_KEYS);
- oop.mixin(ret, ret.FUNCTION_KEYS);
-
- return ret;
-})();
-oop.mixin(exports, Keys);
-
-exports.keyCodeToString = function(keyCode) {
- return (Keys[keyCode] || String.fromCharCode(keyCode)).toLowerCase();
-}
-
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Irakli Gozalishvili <rfobic@gmail.com> (http://jeditoolkit.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/event_emitter', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var EventEmitter = {};
-
-EventEmitter._emit =
-EventEmitter._dispatchEvent = function(eventName, e) {
- this._eventRegistry = this._eventRegistry || {};
-
- var listeners = this._eventRegistry[eventName];
- if (!listeners || !listeners.length) return;
-
- var e = e || {};
- e.type = eventName;
-
- for (var i=0; i<listeners.length; i++) {
- listeners[i](e);
- }
-};
-
-EventEmitter.on =
-EventEmitter.addEventListener = function(eventName, callback) {
- this._eventRegistry = this._eventRegistry || {};
-
- var listeners = this._eventRegistry[eventName];
- if (!listeners) {
- var listeners = this._eventRegistry[eventName] = [];
- }
- if (listeners.indexOf(callback) == -1) {
- listeners.push(callback);
- }
-};
-
-EventEmitter.removeListener =
-EventEmitter.removeEventListener = function(eventName, callback) {
- this._eventRegistry = this._eventRegistry || {};
-
- var listeners = this._eventRegistry[eventName];
- if (!listeners) {
- return;
- }
- var index = listeners.indexOf(callback);
- if (index !== -1) {
- listeners.splice(index, 1);
- }
-};
-
-EventEmitter.removeAllListeners = function(eventName) {
- if (this._eventRegistry) this._eventRegistry[eventName] = [];
-}
-
-exports.EventEmitter = EventEmitter;
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/typecheck', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var objectToString = Object.prototype.toString;
-
-/**
- * Return true if it is a String
- */
-exports.isString = function(it) {
- return it && objectToString.call(it) === "[object String]";
-};
-
-/**
- * Returns true if it is a Boolean.
- */
-exports.isBoolean = function(it) {
- return it && objectToString.call(it) === "[object Boolean]";
-};
-
-/**
- * Returns true if it is a Number.
- */
-exports.isNumber = function(it) {
- return it && objectToString.call(it) === "[object Number]" && isFinite(it);
-};
-
-/**
- * Hack copied from dojo.
- */
-exports.isObject = function(it) {
- return it !== undefined &&
- (it === null || typeof it == "object" ||
- Array.isArray(it) || exports.isFunction(it));
-};
-
-/**
- * Is the passed object a function?
- * From dojo.isFunction()
- */
-exports.isFunction = function(it) {
- return it && objectToString.call(it) === "[object Function]";
-};
-
-});/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Julian Viereck (jviereck@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/catalog', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-
-var extensionSpecs = {};
-
-exports.addExtensionSpec = function(extensionSpec) {
- extensionSpecs[extensionSpec.name] = extensionSpec;
-};
-
-exports.removeExtensionSpec = function(extensionSpec) {
- if (typeof extensionSpec === "string") {
- delete extensionSpecs[extensionSpec];
- }
- else {
- delete extensionSpecs[extensionSpec.name];
- }
-};
-
-exports.getExtensionSpec = function(name) {
- return extensionSpecs[name];
-};
-
-exports.getExtensionSpecs = function() {
- return Object.keys(extensionSpecs);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/lang', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-exports.stringReverse = function(string) {
- return string.split("").reverse().join("");
-};
-
-exports.stringRepeat = function (string, count) {
- return new Array(count + 1).join(string);
-};
-
-var trimBeginRegexp = /^\s\s*/;
-var trimEndRegexp = /\s\s*$/;
-
-exports.stringTrimLeft = function (string) {
- return string.replace(trimBeginRegexp, '')
-};
-
-exports.stringTrimRight = function (string) {
- return string.replace(trimEndRegexp, '');
-};
-
-exports.copyObject = function(obj) {
- var copy = {};
- for (var key in obj) {
- copy[key] = obj[key];
- }
- return copy;
-};
-
-exports.copyArray = function(array){
- var copy = [];
- for (i=0, l=array.length; i<l; i++) {
- if (array[i] && typeof array[i] == "object")
- copy[i] = this.copyObject( array[i] );
- else
- copy[i] = array[i]
- }
- return copy;
-};
-
-exports.deepCopy = function (obj) {
- if (typeof obj != "object") {
- return obj;
- }
-
- var copy = obj.constructor();
- for (var key in obj) {
- if (typeof obj[key] == "object") {
- copy[key] = this.deepCopy(obj[key]);
- } else {
- copy[key] = obj[key];
- }
- }
- return copy;
-}
-
-exports.arrayToMap = function(arr) {
- var map = {};
- for (var i=0; i<arr.length; i++) {
- map[arr[i]] = 1;
- }
- return map;
-
-};
-
-/**
- * splice out of 'array' anything that === 'value'
- */
-exports.arrayRemove = function(array, value) {
- for (var i = 0; i <= array.length; i++) {
- if (value === array[i]) {
- array.splice(i, 1);
- }
- }
-};
-
-exports.escapeRegExp = function(str) {
- return str.replace(/([.*+?^${}()|[\]\/\\])/g, '\\$1');
-};
-
-exports.deferredCall = function(fcn) {
-
- var timer = null;
- var callback = function() {
- timer = null;
- fcn();
- };
-
- var deferred = function(timeout) {
- if (!timer) {
- timer = setTimeout(callback, timeout || 0);
- }
- return deferred;
- }
-
- deferred.schedule = deferred;
-
- deferred.call = function() {
- this.cancel();
- fcn();
- return deferred;
- };
-
- deferred.cancel = function() {
- clearTimeout(timer);
- timer = null;
- return deferred;
- };
-
- return deferred;
-};
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- * Kevin Dangoor (kdangoor@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/types/settings', ['require', 'exports', 'module' , 'pilot/types/basic', 'pilot/types', 'pilot/settings'], function(require, exports, module) {
-
-var SelectionType = require('pilot/types/basic').SelectionType;
-var DeferredType = require('pilot/types/basic').DeferredType;
-var types = require('pilot/types');
-var settings = require('pilot/settings').settings;
-
-
-/**
- * EVIL: This relies on us using settingValue in the same event as setting
- * The alternative is to have some central place where we store the current
- * command line, but this might be a lesser evil for now.
- */
-var lastSetting;
-
-/**
- * Select from the available settings
- */
-var setting = new SelectionType({
- name: 'setting',
- data: function() {
- return env.settings.getSettingNames();
- },
- stringify: function(setting) {
- lastSetting = setting;
- return setting.name;
- },
- fromString: function(str) {
- lastSetting = settings.getSetting(str);
- return lastSetting;
- },
- noMatch: function() {
- lastSetting = null;
- }
-});
-
-/**
- * Something of a hack to allow the set command to give a clearer definition
- * of the type to the command line.
- */
-var settingValue = new DeferredType({
- name: 'settingValue',
- defer: function() {
- if (lastSetting) {
- return lastSetting.type;
- }
- else {
- return types.getType('text');
- }
- },
- /**
- * Promote the current value in any list of predictions, and add it if
- * there are none.
- */
- getDefault: function() {
- var conversion = this.parse('');
- if (lastSetting) {
- var current = lastSetting.get();
- if (conversion.predictions.length === 0) {
- conversion.predictions.push(current);
- }
- else {
- // Remove current from predictions
- var removed = false;
- while (true) {
- var index = conversion.predictions.indexOf(current);
- if (index === -1) {
- break;
- }
- conversion.predictions.splice(index, 1);
- removed = true;
- }
- // If the current value wasn't something we would predict, leave it
- if (removed) {
- conversion.predictions.push(current);
- }
- }
- }
- return conversion;
- }
-});
-
-var env;
-
-/**
- * Registration and de-registration.
- */
-exports.startup = function(data, reason) {
- // TODO: this is probably all kinds of evil, but we need something working
- env = data.env;
- types.registerType(setting);
- types.registerType(settingValue);
-};
-
-exports.shutdown = function(data, reason) {
- types.unregisterType(setting);
- types.unregisterType(settingValue);
-};
-
-
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- * Julian Viereck (jviereck@mozilla.com)
- * Kevin Dangoor (kdangoor@mozilla.com)
- * Irakli Gozalishvili <rfobic@gmail.com> (http://jeditoolkit.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/settings', ['require', 'exports', 'module' , 'pilot/console', 'pilot/oop', 'pilot/types', 'pilot/event_emitter', 'pilot/catalog'], function(require, exports, module) {
-
-/**
- * This plug-in manages settings.
- */
-
-var console = require('pilot/console');
-var oop = require('pilot/oop');
-var types = require('pilot/types');
-var EventEmitter = require('pilot/event_emitter').EventEmitter;
-var catalog = require('pilot/catalog');
-
-var settingExtensionSpec = {
- name: 'setting',
- description: 'A setting is something that the application offers as a ' +
- 'way to customize how it works',
- register: 'env.settings.addSetting',
- indexOn: 'name'
-};
-
-exports.startup = function(data, reason) {
- catalog.addExtensionSpec(settingExtensionSpec);
-};
-
-exports.shutdown = function(data, reason) {
- catalog.removeExtensionSpec(settingExtensionSpec);
-};
-
-
-/**
- * Create a new setting.
- * @param settingSpec An object literal that looks like this:
- * {
- * name: 'thing',
- * description: 'Thing is an example setting',
- * type: 'string',
- * defaultValue: 'something'
- * }
- */
-function Setting(settingSpec, settings) {
- this._settings = settings;
-
- Object.keys(settingSpec).forEach(function(key) {
- this[key] = settingSpec[key];
- }, this);
-
- this.type = types.getType(this.type);
- if (this.type == null) {
- throw new Error('In ' + this.name +
- ': can\'t find type for: ' + JSON.stringify(settingSpec.type));
- }
-
- if (!this.name) {
- throw new Error('Setting.name == undefined. Ignoring.', this);
- }
-
- if (!this.defaultValue === undefined) {
- throw new Error('Setting.defaultValue == undefined', this);
- }
-
- if (this.onChange) {
- this.on('change', this.onChange.bind(this))
- }
-
- this.set(this.defaultValue);
-}
-Setting.prototype = {
- get: function() {
- return this.value;
- },
-
- set: function(value) {
- if (this.value === value) {
- return;
- }
-
- this.value = value;
- if (this._settings.persister) {
- this._settings.persister.persistValue(this._settings, this.name, value);
- }
-
- this._dispatchEvent('change', { setting: this, value: value });
- },
-
- /**
- * Reset the value of the <code>key</code> setting to it's default
- */
- resetValue: function() {
- this.set(this.defaultValue);
- },
- toString: function () {
- return this.name;
- }
-};
-oop.implement(Setting.prototype, EventEmitter);
-
-
-/**
- * A base class for all the various methods of storing settings.
- * <p>Usage:
- * <pre>
- * // Create manually, or require 'settings' from the container.
- * // This is the manual version:
- * var settings = plugins.catalog.getObject('settings');
- * // Add a new setting
- * settings.addSetting({ name:'foo', ... });
- * // Display the default value
- * alert(settings.get('foo'));
- * // Alter the value, which also publishes the change etc.
- * settings.set('foo', 'bar');
- * // Reset the value to the default
- * settings.resetValue('foo');
- * </pre>
- * @constructor
- */
-function Settings(persister) {
- // Storage for deactivated values
- this._deactivated = {};
-
- // Storage for the active settings
- this._settings = {};
- // We often want sorted setting names. Cache
- this._settingNames = [];
-
- if (persister) {
- this.setPersister(persister);
- }
-};
-
-Settings.prototype = {
- /**
- * Function to add to the list of available settings.
- * <p>Example usage:
- * <pre>
- * var settings = plugins.catalog.getObject('settings');
- * settings.addSetting({
- * name: 'tabsize', // For use in settings.get('X')
- * type: 'number', // To allow value checking.
- * defaultValue: 4 // Default value for use when none is directly set
- * });
- * </pre>
- * @param {object} settingSpec Object containing name/type/defaultValue members.
- */
- addSetting: function(settingSpec) {
- var setting = new Setting(settingSpec, this);
- this._settings[setting.name] = setting;
- this._settingNames.push(setting.name);
- this._settingNames.sort();
- },
-
- addSettings: function addSettings(settings) {
- Object.keys(settings).forEach(function (name) {
- var setting = settings[name];
- if (!('name' in setting)) setting.name = name;
- this.addSetting(setting);
- }, this);
- },
-
- removeSetting: function(setting) {
- var name = (typeof setting === 'string' ? setting : setting.name);
- setting = this._settings[name];
- delete this._settings[name];
- util.arrayRemove(this._settingNames, name);
- settings.removeAllListeners('change');
- },
-
- removeSettings: function removeSettings(settings) {
- Object.keys(settings).forEach(function(name) {
- var setting = settings[name];
- if (!('name' in setting)) setting.name = name;
- this.removeSettings(setting);
- }, this);
- },
-
- getSettingNames: function() {
- return this._settingNames;
- },
-
- getSetting: function(name) {
- return this._settings[name];
- },
-
- /**
- * A Persister is able to store settings. It is an object that defines
- * two functions:
- * loadInitialValues(settings) and persistValue(settings, key, value).
- */
- setPersister: function(persister) {
- this._persister = persister;
- if (persister) {
- persister.loadInitialValues(this);
- }
- },
-
- resetAll: function() {
- this.getSettingNames().forEach(function(key) {
- this.resetValue(key);
- }, this);
- },
-
- /**
- * Retrieve a list of the known settings and their values
- */
- _list: function() {
- var reply = [];
- this.getSettingNames().forEach(function(setting) {
- reply.push({
- 'key': setting,
- 'value': this.getSetting(setting).get()
- });
- }, this);
- return reply;
- },
-
- /**
- * Prime the local cache with the defaults.
- */
- _loadDefaultValues: function() {
- this._loadFromObject(this._getDefaultValues());
- },
-
- /**
- * Utility to load settings from an object
- */
- _loadFromObject: function(data) {
- // We iterate over data rather than keys so we don't forget values
- // which don't have a setting yet.
- for (var key in data) {
- if (data.hasOwnProperty(key)) {
- var setting = this._settings[key];
- if (setting) {
- var value = setting.type.parse(data[key]);
- this.set(key, value);
- } else {
- this.set(key, data[key]);
- }
- }
- }
- },
-
- /**
- * Utility to grab all the settings and export them into an object
- */
- _saveToObject: function() {
- return this.getSettingNames().map(function(key) {
- return this._settings[key].type.stringify(this.get(key));
- }.bind(this));
- },
-
- /**
- * The default initial settings
- */
- _getDefaultValues: function() {
- return this.getSettingNames().map(function(key) {
- return this._settings[key].spec.defaultValue;
- }.bind(this));
- }
-};
-exports.settings = new Settings();
-
-/**
- * Save the settings in a cookie
- * This code has not been tested since reboot
- * @constructor
- */
-function CookiePersister() {
-};
-
-CookiePersister.prototype = {
- loadInitialValues: function(settings) {
- settings._loadDefaultValues();
- var data = cookie.get('settings');
- settings._loadFromObject(JSON.parse(data));
- },
-
- persistValue: function(settings, key, value) {
- try {
- var stringData = JSON.stringify(settings._saveToObject());
- cookie.set('settings', stringData);
- } catch (ex) {
- console.error('Unable to JSONify the settings! ' + ex);
- return;
- }
- }
-};
-
-exports.CookiePersister = CookiePersister;
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Skywriter Team (skywriter@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/commands/settings', ['require', 'exports', 'module' , 'pilot/canon'], function(require, exports, module) {
-
-
-var setCommandSpec = {
- name: 'set',
- params: [
- {
- name: 'setting',
- type: 'setting',
- description: 'The name of the setting to display or alter',
- defaultValue: null
- },
- {
- name: 'value',
- type: 'settingValue',
- description: 'The new value for the chosen setting',
- defaultValue: null
- }
- ],
- description: 'define and show settings',
- exec: function(env, args, request) {
- var html;
- if (!args.setting) {
- // 'set' by itself lists all the settings
- var names = env.settings.getSettingNames();
- html = '';
- // first sort the settingsList based on the name
- names.sort(function(name1, name2) {
- return name1.localeCompare(name2);
- });
-
- names.forEach(function(name) {
- var setting = env.settings.getSetting(name);
- var url = 'https://wiki.mozilla.org/Labs/Skywriter/Settings#' +
- setting.name;
- html += '<a class="setting" href="' + url +
- '" title="View external documentation on setting: ' +
- setting.name +
- '" target="_blank">' +
- setting.name +
- '</a> = ' +
- setting.value +
- '<br/>';
- });
- } else {
- // set with only a setting, shows the value for that setting
- if (args.value === undefined) {
- html = '<strong>' + setting.name + '</strong> = ' +
- setting.get();
- } else {
- // Actually change the setting
- args.setting.set(args.value);
- html = 'Setting: <strong>' + args.setting.name + '</strong> = ' +
- args.setting.get();
- }
- }
- request.done(html);
- }
-};
-
-var unsetCommandSpec = {
- name: 'unset',
- params: [
- {
- name: 'setting',
- type: 'setting',
- description: 'The name of the setting to return to defaults'
- }
- ],
- description: 'unset a setting entirely',
- exec: function(env, args, request) {
- var setting = env.settings.get(args.setting);
- if (!setting) {
- request.doneWithError('No setting with the name <strong>' +
- args.setting + '</strong>.');
- return;
- }
-
- setting.reset();
- request.done('Reset ' + setting.name + ' to default: ' +
- env.settings.get(args.setting));
- }
-};
-
-var canon = require('pilot/canon');
-
-exports.startup = function(data, reason) {
- canon.addCommand(setCommandSpec);
- canon.addCommand(unsetCommandSpec);
-};
-
-exports.shutdown = function(data, reason) {
- canon.removeCommand(setCommandSpec);
- canon.removeCommand(unsetCommandSpec);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Skywriter Team (skywriter@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/commands/basic', ['require', 'exports', 'module' , 'pilot/typecheck', 'pilot/canon'], function(require, exports, module) {
-
-
-var checks = require("pilot/typecheck");
-var canon = require('pilot/canon');
-
-/**
- * 'help' command
- */
-var helpCommandSpec = {
- name: 'help',
- params: [
- {
- name: 'search',
- type: 'text',
- description: 'Search string to narrow the output.',
- defaultValue: null
- }
- ],
- description: 'Get help on the available commands.',
- exec: function(env, args, request) {
- var output = [];
-
- var command = canon.getCommand(args.search);
- if (command && command.exec) {
- // caught a real command
- output.push(command.description ?
- command.description :
- 'No description for ' + args.search);
- } else {
- var showHidden = false;
-
- if (command) {
- // We must be looking at sub-commands
- output.push('<h2>Sub-Commands of ' + command.name + '</h2>');
- output.push('<p>' + command.description + '</p>');
- }
- else if (args.search) {
- if (args.search == 'hidden') { // sneaky, sneaky.
- args.search = '';
- showHidden = true;
- }
- output.push('<h2>Commands starting with \'' + args.search + '\':</h2>');
- }
- else {
- output.push('<h2>Available Commands:</h2>');
- }
-
- var commandNames = canon.getCommandNames();
- commandNames.sort();
-
- output.push('<table>');
- for (var i = 0; i < commandNames.length; i++) {
- command = canon.getCommand(commandNames[i]);
- if (!showHidden && command.hidden) {
- continue;
- }
- if (command.description === undefined) {
- // Ignore editor actions
- continue;
- }
- if (args.search && command.name.indexOf(args.search) !== 0) {
- // Filtered out by the user
- continue;
- }
- if (!args.search && command.name.indexOf(' ') != -1) {
- // sub command
- continue;
- }
- if (command && command.name == args.search) {
- // sub command, and we've already given that help
- continue;
- }
-
- // todo add back a column with parameter information, perhaps?
-
- output.push('<tr>');
- output.push('<th class="right">' + command.name + '</th>');
- output.push('<td>' + command.description + '</td>');
- output.push('</tr>');
- }
- output.push('</table>');
- }
-
- request.done(output.join(''));
- }
-};
-
-/**
- * 'eval' command
- */
-var evalCommandSpec = {
- name: 'eval',
- params: [
- {
- name: 'javascript',
- type: 'text',
- description: 'The JavaScript to evaluate'
- }
- ],
- description: 'evals given js code and show the result',
- hidden: true,
- exec: function(env, args, request) {
- var result;
- var javascript = args.javascript;
- try {
- result = eval(javascript);
- } catch (e) {
- result = '<b>Error: ' + e.message + '</b>';
- }
-
- var msg = '';
- var type = '';
- var x;
-
- if (checks.isFunction(result)) {
- // converts the function to a well formated string
- msg = (result + '').replace(/\n/g, '<br>').replace(/ /g, ' ');
- type = 'function';
- } else if (checks.isObject(result)) {
- if (Array.isArray(result)) {
- type = 'array';
- } else {
- type = 'object';
- }
-
- var items = [];
- var value;
-
- for (x in result) {
- if (result.hasOwnProperty(x)) {
- if (checks.isFunction(result[x])) {
- value = '[function]';
- } else if (checks.isObject(result[x])) {
- value = '[object]';
- } else {
- value = result[x];
- }
-
- items.push({name: x, value: value});
- }
- }
-
- items.sort(function(a,b) {
- return (a.name.toLowerCase() < b.name.toLowerCase()) ? -1 : 1;
- });
-
- for (x = 0; x < items.length; x++) {
- msg += '<b>' + items[x].name + '</b>: ' + items[x].value + '<br>';
- }
-
- } else {
- msg = result;
- type = typeof result;
- }
-
- request.done('Result for eval <b>\'' + javascript + '\'</b>' +
- ' (type: '+ type+'): <br><br>'+ msg);
- }
-};
-
-var canon = require('pilot/canon');
-
-exports.startup = function(data, reason) {
- canon.addCommand(helpCommandSpec);
- canon.addCommand(evalCommandSpec);
-};
-
-exports.shutdown = function(data, reason) {
- canon.removeCommand(helpCommandSpec);
- canon.removeCommand(evalCommandSpec);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/settings/canon', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-
-var historyLengthSetting = {
- name: "historyLength",
- description: "How many typed commands do we recall for reference?",
- type: "number",
- defaultValue: 50
-};
-
-exports.startup = function(data, reason) {
- data.env.settings.addSetting(historyLengthSetting);
-};
-
-exports.shutdown = function(data, reason) {
- data.env.settings.removeSetting(historyLengthSetting);
-};
-
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Kevin Dangoor (kdangoor@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/plugin_manager', ['require', 'exports', 'module' , 'pilot/promise'], function(require, exports, module) {
-
-var Promise = require("pilot/promise").Promise;
-
-exports.REASONS = {
- APP_STARTUP: 1,
- APP_SHUTDOWN: 2,
- PLUGIN_ENABLE: 3,
- PLUGIN_DISABLE: 4,
- PLUGIN_INSTALL: 5,
- PLUGIN_UNINSTALL: 6,
- PLUGIN_UPGRADE: 7,
- PLUGIN_DOWNGRADE: 8
-};
-
-exports.Plugin = function(name) {
- this.name = name;
- this.status = this.INSTALLED;
-};
-
-exports.Plugin.prototype = {
- /**
- * constants for the state
- */
- NEW: 0,
- INSTALLED: 1,
- REGISTERED: 2,
- STARTED: 3,
- UNREGISTERED: 4,
- SHUTDOWN: 5,
-
- install: function(data, reason) {
- var pr = new Promise();
- if (this.status > this.NEW) {
- pr.resolve(this);
- return pr;
- }
- require([this.name], function(pluginModule) {
- if (pluginModule.install) {
- pluginModule.install(data, reason);
- }
- this.status = this.INSTALLED;
- pr.resolve(this);
- }.bind(this));
- return pr;
- },
-
- register: function(data, reason) {
- var pr = new Promise();
- if (this.status != this.INSTALLED) {
- pr.resolve(this);
- return pr;
- }
- require([this.name], function(pluginModule) {
- if (pluginModule.register) {
- pluginModule.register(data, reason);
- }
- this.status = this.REGISTERED;
- pr.resolve(this);
- }.bind(this));
- return pr;
- },
-
- startup: function(data, reason) {
- reason = reason || exports.REASONS.APP_STARTUP;
- var pr = new Promise();
- if (this.status != this.REGISTERED) {
- pr.resolve(this);
- return pr;
- }
- require([this.name], function(pluginModule) {
- if (pluginModule.startup) {
- pluginModule.startup(data, reason);
- }
- this.status = this.STARTED;
- pr.resolve(this);
- }.bind(this));
- return pr;
- },
-
- shutdown: function(data, reason) {
- if (this.status != this.STARTED) {
- return;
- }
- pluginModule = require(this.name);
- if (pluginModule.shutdown) {
- pluginModule.shutdown(data, reason);
- }
- }
-};
-
-exports.PluginCatalog = function() {
- this.plugins = {};
-};
-
-exports.PluginCatalog.prototype = {
- registerPlugins: function(pluginList, data, reason) {
- var registrationPromises = [];
- pluginList.forEach(function(pluginName) {
- var plugin = this.plugins[pluginName];
- if (plugin === undefined) {
- plugin = new exports.Plugin(pluginName);
- this.plugins[pluginName] = plugin;
- registrationPromises.push(plugin.register(data, reason));
- }
- }.bind(this));
- return Promise.group(registrationPromises);
- },
-
- startupPlugins: function(data, reason) {
- var startupPromises = [];
- for (var pluginName in this.plugins) {
- var plugin = this.plugins[pluginName];
- startupPromises.push(plugin.startup(data, reason));
- }
- return Promise.group(startupPromises);
- }
-};
-
-exports.catalog = new exports.PluginCatalog();
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/promise', ['require', 'exports', 'module' , 'pilot/console', 'pilot/stacktrace'], function(require, exports, module) {
-
-var console = require("pilot/console");
-var Trace = require('pilot/stacktrace').Trace;
-
-/**
- * A promise can be in one of 2 states.
- * The ERROR and SUCCESS states are terminal, the PENDING state is the only
- * start state.
- */
-var ERROR = -1;
-var PENDING = 0;
-var SUCCESS = 1;
-
-/**
- * We give promises and ID so we can track which are outstanding
- */
-var _nextId = 0;
-
-/**
- * Debugging help if 2 things try to complete the same promise.
- * This can be slow (especially on chrome due to the stack trace unwinding) so
- * we should leave this turned off in normal use.
- */
-var _traceCompletion = false;
-
-/**
- * Outstanding promises. Handy list for debugging only.
- */
-var _outstanding = [];
-
-/**
- * Recently resolved promises. Also for debugging only.
- */
-var _recent = [];
-
-/**
- * Create an unfulfilled promise
- */
-Promise = function () {
- this._status = PENDING;
- this._value = undefined;
- this._onSuccessHandlers = [];
- this._onErrorHandlers = [];
-
- // Debugging help
- this._id = _nextId++;
- //this._createTrace = new Trace(new Error());
- _outstanding[this._id] = this;
-};
-
-/**
- * Yeay for RTTI.
- */
-Promise.prototype.isPromise = true;
-
-/**
- * Have we either been resolve()ed or reject()ed?
- */
-Promise.prototype.isComplete = function() {
- return this._status != PENDING;
-};
-
-/**
- * Have we resolve()ed?
- */
-Promise.prototype.isResolved = function() {
- return this._status == SUCCESS;
-};
-
-/**
- * Have we reject()ed?
- */
-Promise.prototype.isRejected = function() {
- return this._status == ERROR;
-};
-
-/**
- * Take the specified action of fulfillment of a promise, and (optionally)
- * a different action on promise rejection.
- */
-Promise.prototype.then = function(onSuccess, onError) {
- if (typeof onSuccess === 'function') {
- if (this._status === SUCCESS) {
- onSuccess.call(null, this._value);
- } else if (this._status === PENDING) {
- this._onSuccessHandlers.push(onSuccess);
- }
- }
-
- if (typeof onError === 'function') {
- if (this._status === ERROR) {
- onError.call(null, this._value);
- } else if (this._status === PENDING) {
- this._onErrorHandlers.push(onError);
- }
- }
-
- return this;
-};
-
-/**
- * Like then() except that rather than returning <tt>this</tt> we return
- * a promise which
- */
-Promise.prototype.chainPromise = function(onSuccess) {
- var chain = new Promise();
- chain._chainedFrom = this;
- this.then(function(data) {
- try {
- chain.resolve(onSuccess(data));
- } catch (ex) {
- chain.reject(ex);
- }
- }, function(ex) {
- chain.reject(ex);
- });
- return chain;
-};
-
-/**
- * Supply the fulfillment of a promise
- */
-Promise.prototype.resolve = function(data) {
- return this._complete(this._onSuccessHandlers, SUCCESS, data, 'resolve');
-};
-
-/**
- * Renege on a promise
- */
-Promise.prototype.reject = function(data) {
- return this._complete(this._onErrorHandlers, ERROR, data, 'reject');
-};
-
-/**
- * Internal method to be called on resolve() or reject().
- * @private
- */
-Promise.prototype._complete = function(list, status, data, name) {
- // Complain if we've already been completed
- if (this._status != PENDING) {
- console.group('Promise already closed');
- console.error('Attempted ' + name + '() with ', data);
- console.error('Previous status = ', this._status,
- ', previous value = ', this._value);
- console.trace();
-
- if (this._completeTrace) {
- console.error('Trace of previous completion:');
- this._completeTrace.log(5);
- }
- console.groupEnd();
- return this;
- }
-
- if (_traceCompletion) {
- this._completeTrace = new Trace(new Error());
- }
-
- this._status = status;
- this._value = data;
-
- // Call all the handlers, and then delete them
- list.forEach(function(handler) {
- handler.call(null, this._value);
- }, this);
- this._onSuccessHandlers.length = 0;
- this._onErrorHandlers.length = 0;
-
- // Remove the given {promise} from the _outstanding list, and add it to the
- // _recent list, pruning more than 20 recent promises from that list.
- delete _outstanding[this._id];
- _recent.push(this);
- while (_recent.length > 20) {
- _recent.shift();
- }
-
- return this;
-};
-
-/**
- * Takes an array of promises and returns a promise that that is fulfilled once
- * all the promises in the array are fulfilled
- * @param group The array of promises
- * @return the promise that is fulfilled when all the array is fulfilled
- */
-Promise.group = function(promiseList) {
- if (!(promiseList instanceof Array)) {
- promiseList = Array.prototype.slice.call(arguments);
- }
-
- // If the original array has nothing in it, return now to avoid waiting
- if (promiseList.length === 0) {
- return new Promise().resolve([]);
- }
-
- var groupPromise = new Promise();
- var results = [];
- var fulfilled = 0;
-
- var onSuccessFactory = function(index) {
- return function(data) {
- results[index] = data;
- fulfilled++;
- // If the group has already failed, silently drop extra results
- if (groupPromise._status !== ERROR) {
- if (fulfilled === promiseList.length) {
- groupPromise.resolve(results);
- }
- }
- };
- };
-
- promiseList.forEach(function(promise, index) {
- var onSuccess = onSuccessFactory(index);
- var onError = groupPromise.reject.bind(groupPromise);
- promise.then(onSuccess, onError);
- });
-
- return groupPromise;
-};
-
-exports.Promise = Promise;
-exports._outstanding = _outstanding;
-exports._recent = _recent;
-
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Mihai Sucan <mihai AT sucan AT gmail ODT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/dom', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var XHTML_NS = "http://www.w3.org/1999/xhtml";
-
-exports.createElement = function(tag, ns) {
- return document.createElementNS ?
- document.createElementNS(ns || XHTML_NS, tag) :
- document.createElement(tag);
-};
-
-exports.setText = function(elem, text) {
- if (elem.innerText !== undefined) {
- elem.innerText = text;
- }
- if (elem.textContent !== undefined) {
- elem.textContent = text;
- }
-};
-
-if (!document.documentElement.classList) {
- exports.hasCssClass = function(el, name) {
- var classes = el.className.split(/\s+/g);
- return classes.indexOf(name) !== -1;
- };
-
- /**
- * Add a CSS class to the list of classes on the given node
- */
- exports.addCssClass = function(el, name) {
- if (!exports.hasCssClass(el, name)) {
- el.className += " " + name;
- }
- };
-
- /**
- * Remove a CSS class from the list of classes on the given node
- */
- exports.removeCssClass = function(el, name) {
- var classes = el.className.split(/\s+/g);
- while (true) {
- var index = classes.indexOf(name);
- if (index == -1) {
- break;
- }
- classes.splice(index, 1);
- }
- el.className = classes.join(" ");
- };
-
- exports.toggleCssClass = function(el, name) {
- var classes = el.className.split(/\s+/g), add = true;
- while (true) {
- var index = classes.indexOf(name);
- if (index == -1) {
- break;
- }
- add = false;
- classes.splice(index, 1);
- }
- if(add)
- classes.push(name);
-
- el.className = classes.join(" ");
- return add;
- };
-} else {
- exports.hasCssClass = function(el, name) {
- return el.classList.contains(name);
- };
-
- exports.addCssClass = function(el, name) {
- el.classList.add(name);
- };
-
- exports.removeCssClass = function(el, name) {
- el.classList.remove(name);
- };
-
- exports.toggleCssClass = function(el, name) {
- return el.classList.toggle(name);
- };
-}
-
-/**
- * Add or remove a CSS class from the list of classes on the given node
- * depending on the value of <tt>include</tt>
- */
-exports.setCssClass = function(node, className, include) {
- if (include) {
- exports.addCssClass(node, className);
- } else {
- exports.removeCssClass(node, className);
- }
-};
-
-exports.importCssString = function(cssText, doc){
- doc = doc || document;
-
- if (doc.createStyleSheet) {
- var sheet = doc.createStyleSheet();
- sheet.cssText = cssText;
- }
- else {
- var style = doc.createElementNS ?
- doc.createElementNS(XHTML_NS, "style") :
- doc.createElement("style");
-
- style.appendChild(doc.createTextNode(cssText));
-
- var head = doc.getElementsByTagName("head")[0] || doc.documentElement;
- head.appendChild(style);
- }
-};
-
-exports.getInnerWidth = function(element) {
- return (parseInt(exports.computedStyle(element, "paddingLeft"))
- + parseInt(exports.computedStyle(element, "paddingRight")) + element.clientWidth);
-};
-
-exports.getInnerHeight = function(element) {
- return (parseInt(exports.computedStyle(element, "paddingTop"))
- + parseInt(exports.computedStyle(element, "paddingBottom")) + element.clientHeight);
-};
-
-if (window.pageYOffset !== undefined) {
- exports.getPageScrollTop = function() {
- return window.pageYOffset;
- };
-
- exports.getPageScrollLeft = function() {
- return window.pageXOffset;
- };
-}
-else {
- exports.getPageScrollTop = function() {
- return document.body.scrollTop;
- };
-
- exports.getPageScrollLeft = function() {
- return document.body.scrollLeft;
- };
-}
-
-if (window.getComputedStyle)
- exports.computedStyle = function(element, style) {
- if (style)
- return (window.getComputedStyle(element, "") || {})[style] || "";
- return window.getComputedStyle(element, "") || {}
- };
-else
- exports.computedStyle = function(element, style) {
- if (style)
- return element.currentStyle[style];
- return element.currentStyle
- };
-
-exports.scrollbarWidth = function() {
-
- var inner = exports.createElement("p");
- inner.style.width = "100%";
- inner.style.minWidth = "0px";
- inner.style.height = "200px";
-
- var outer = exports.createElement("div");
- var style = outer.style;
-
- style.position = "absolute";
- style.left = "-10000px";
- style.overflow = "hidden";
- style.width = "200px";
- style.minWidth = "0px";
- style.height = "150px";
-
- outer.appendChild(inner);
-
- var body = document.body || document.documentElement;
- body.appendChild(outer);
-
- var noScrollbar = inner.offsetWidth;
-
- style.overflow = "scroll";
- var withScrollbar = inner.offsetWidth;
-
- if (noScrollbar == withScrollbar) {
- withScrollbar = outer.clientWidth;
- }
-
- body.removeChild(outer);
-
- return noScrollbar-withScrollbar;
-};
-
-/**
- * Optimized set innerHTML. This is faster than plain innerHTML if the element
- * already contains a lot of child elements.
- *
- * See http://blog.stevenlevithan.com/archives/faster-than-innerhtml for details
- */
-exports.setInnerHtml = function(el, innerHtml) {
- var element = el.cloneNode(false);//document.createElement("div");
- element.innerHTML = innerHtml;
- el.parentNode.replaceChild(element, el);
- return element;
-};
-
-exports.setInnerText = function(el, innerText) {
- if (document.body && "textContent" in document.body)
- el.textContent = innerText;
- else
- el.innerText = innerText;
-
-};
-
-exports.getInnerText = function(el) {
- if (document.body && "textContent" in document.body)
- return el.textContent;
- else
- return el.innerText || el.textContent || "";
-};
-
-exports.getParentWindow = function(document) {
- return document.defaultView || document.parentWindow;
-};
-
-exports.getSelectionStart = function(textarea) {
- // TODO IE
- var start;
- try {
- start = textarea.selectionStart || 0;
- } catch (e) {
- start = 0;
- }
- return start;
-};
-
-exports.setSelectionStart = function(textarea, start) {
- // TODO IE
- return textarea.selectionStart = start;
-};
-
-exports.getSelectionEnd = function(textarea) {
- // TODO IE
- var end;
- try {
- end = textarea.selectionEnd || 0;
- } catch (e) {
- end = 0;
- }
- return end;
-};
-
-exports.setSelectionEnd = function(textarea, end) {
- // TODO IE
- return textarea.selectionEnd = end;
-};
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/event', ['require', 'exports', 'module' , 'pilot/keys', 'pilot/useragent', 'pilot/dom'], function(require, exports, module) {
-
-var keys = require("pilot/keys");
-var useragent = require("pilot/useragent");
-var dom = require("pilot/dom");
-
-exports.addListener = function(elem, type, callback) {
- if (elem.addEventListener) {
- return elem.addEventListener(type, callback, false);
- }
- if (elem.attachEvent) {
- var wrapper = function() {
- callback(window.event);
- };
- callback._wrapper = wrapper;
- elem.attachEvent("on" + type, wrapper);
- }
-};
-
-exports.removeListener = function(elem, type, callback) {
- if (elem.removeEventListener) {
- return elem.removeEventListener(type, callback, false);
- }
- if (elem.detachEvent) {
- elem.detachEvent("on" + type, callback._wrapper || callback);
- }
-};
-
-/**
-* Prevents propagation and clobbers the default action of the passed event
-*/
-exports.stopEvent = function(e) {
- exports.stopPropagation(e);
- exports.preventDefault(e);
- return false;
-};
-
-exports.stopPropagation = function(e) {
- if (e.stopPropagation)
- e.stopPropagation();
- else
- e.cancelBubble = true;
-};
-
-exports.preventDefault = function(e) {
- if (e.preventDefault)
- e.preventDefault();
- else
- e.returnValue = false;
-};
-
-exports.getDocumentX = function(e) {
- if (e.clientX) {
- return e.clientX + dom.getPageScrollLeft();
- } else {
- return e.pageX;
- }
-};
-
-exports.getDocumentY = function(e) {
- if (e.clientY) {
- return e.clientY + dom.getPageScrollTop();
- } else {
- return e.pageY;
- }
-};
-
-/**
- * @return {Number} 0 for left button, 1 for middle button, 2 for right button
- */
-exports.getButton = function(e) {
- if (e.type == "dblclick")
- return 0;
- else if (e.type == "contextmenu")
- return 2;
-
- // DOM Event
- if (e.preventDefault) {
- return e.button;
- }
- // old IE
- else {
- return {1:0, 2:2, 4:1}[e.button];
- }
-};
-
-if (document.documentElement.setCapture) {
- exports.capture = function(el, eventHandler, releaseCaptureHandler) {
- function onMouseMove(e) {
- eventHandler(e);
- return exports.stopPropagation(e);
- }
-
- function onReleaseCapture(e) {
- eventHandler && eventHandler(e);
- releaseCaptureHandler && releaseCaptureHandler();
-
- exports.removeListener(el, "mousemove", eventHandler);
- exports.removeListener(el, "mouseup", onReleaseCapture);
- exports.removeListener(el, "losecapture", onReleaseCapture);
-
- el.releaseCapture();
- }
-
- exports.addListener(el, "mousemove", eventHandler);
- exports.addListener(el, "mouseup", onReleaseCapture);
- exports.addListener(el, "losecapture", onReleaseCapture);
- el.setCapture();
- };
-}
-else {
- exports.capture = function(el, eventHandler, releaseCaptureHandler) {
- function onMouseMove(e) {
- eventHandler(e);
- e.stopPropagation();
- }
-
- function onMouseUp(e) {
- eventHandler && eventHandler(e);
- releaseCaptureHandler && releaseCaptureHandler();
-
- document.removeEventListener("mousemove", onMouseMove, true);
- document.removeEventListener("mouseup", onMouseUp, true);
-
- e.stopPropagation();
- }
-
- document.addEventListener("mousemove", onMouseMove, true);
- document.addEventListener("mouseup", onMouseUp, true);
- };
-}
-
-exports.addMouseWheelListener = function(el, callback) {
- var listener = function(e) {
- if (e.wheelDelta !== undefined) {
- if (e.wheelDeltaX !== undefined) {
- e.wheelX = -e.wheelDeltaX / 8;
- e.wheelY = -e.wheelDeltaY / 8;
- } else {
- e.wheelX = 0;
- e.wheelY = -e.wheelDelta / 8;
- }
- }
- else {
- if (e.axis && e.axis == e.HORIZONTAL_AXIS) {
- e.wheelX = (e.detail || 0) * 5;
- e.wheelY = 0;
- } else {
- e.wheelX = 0;
- e.wheelY = (e.detail || 0) * 5;
- }
- }
- callback(e);
- };
- exports.addListener(el, "DOMMouseScroll", listener);
- exports.addListener(el, "mousewheel", listener);
-};
-
-exports.addMultiMouseDownListener = function(el, button, count, timeout, callback) {
- var clicks = 0;
- var startX, startY;
-
- var listener = function(e) {
- clicks += 1;
- if (clicks == 1) {
- startX = e.clientX;
- startY = e.clientY;
-
- setTimeout(function() {
- clicks = 0;
- }, timeout || 600);
- }
-
- var isButton = exports.getButton(e) == button;
- if (!isButton || Math.abs(e.clientX - startX) > 5 || Math.abs(e.clientY - startY) > 5)
- clicks = 0;
-
- if (clicks == count) {
- clicks = 0;
- callback(e);
- }
-
- if (isButton)
- return exports.preventDefault(e);
- };
-
- exports.addListener(el, "mousedown", listener);
- useragent.isIE && exports.addListener(el, "dblclick", listener);
-};
-
-function normalizeCommandKeys(callback, e, keyCode) {
- var hashId = 0;
- if (useragent.isOpera && useragent.isMac) {
- hashId = 0 | (e.metaKey ? 1 : 0) | (e.altKey ? 2 : 0)
- | (e.shiftKey ? 4 : 0) | (e.ctrlKey ? 8 : 0);
- } else {
- hashId = 0 | (e.ctrlKey ? 1 : 0) | (e.altKey ? 2 : 0)
- | (e.shiftKey ? 4 : 0) | (e.metaKey ? 8 : 0);
- }
-
- if (keyCode in keys.MODIFIER_KEYS) {
- switch (keys.MODIFIER_KEYS[keyCode]) {
- case "Alt":
- hashId = 2;
- break;
- case "Shift":
- hashId = 4;
- break
- case "Ctrl":
- hashId = 1;
- break;
- default:
- hashId = 8;
- break;
- }
- keyCode = 0;
- }
-
- if (hashId & 8 && (keyCode == 91 || keyCode == 93)) {
- keyCode = 0;
- }
-
- // If there is no hashID and the keyCode is not a function key, then
- // we don't call the callback as we don't handle a command key here
- // (it's a normal key/character input).
- if (hashId == 0 && !(keyCode in keys.FUNCTION_KEYS)) {
- return false;
- }
-
- return callback(e, hashId, keyCode);
-}
-
-exports.addCommandKeyListener = function(el, callback) {
- var addListener = exports.addListener;
- if (useragent.isOldGecko) {
- // Old versions of Gecko aka. Firefox < 4.0 didn't repeat the keydown
- // event if the user pressed the key for a longer time. Instead, the
- // keydown event was fired once and later on only the keypress event.
- // To emulate the 'right' keydown behavior, the keyCode of the initial
- // keyDown event is stored and in the following keypress events the
- // stores keyCode is used to emulate a keyDown event.
- var lastKeyDownKeyCode = null;
- addListener(el, "keydown", function(e) {
- lastKeyDownKeyCode = e.keyCode;
- });
- addListener(el, "keypress", function(e) {
- return normalizeCommandKeys(callback, e, lastKeyDownKeyCode);
- });
- } else {
- var lastDown = null;
-
- addListener(el, "keydown", function(e) {
- lastDown = e.keyIdentifier || e.keyCode;
- return normalizeCommandKeys(callback, e, e.keyCode);
- });
-
- // repeated keys are fired as keypress and not keydown events
- if (useragent.isMac && useragent.isOpera) {
- addListener(el, "keypress", function(e) {
- var keyId = e.keyIdentifier || e.keyCode;
- if (lastDown !== keyId) {
- return normalizeCommandKeys(callback, e, e.keyCode);
- } else {
- lastDown = null;
- }
- });
- }
- }
-};
-
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Irakli Gozalishvili <rfobic@gmail.com> (http://jeditoolkit.com)
- * Julian Viereck <julian.viereck@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/editor', ['require', 'exports', 'module' , 'pilot/fixoldbrowsers', 'pilot/oop', 'pilot/event', 'pilot/lang', 'pilot/useragent', 'ace/keyboard/textinput', 'ace/mouse_handler', 'ace/keyboard/keybinding', 'ace/edit_session', 'ace/search', 'ace/range', 'pilot/event_emitter'], function(require, exports, module) {
-
-require("pilot/fixoldbrowsers");
-
-var oop = require("pilot/oop");
-var event = require("pilot/event");
-var lang = require("pilot/lang");
-var useragent = require("pilot/useragent");
-var TextInput = require("ace/keyboard/textinput").TextInput;
-var MouseHandler = require("ace/mouse_handler").MouseHandler;
-//var TouchHandler = require("ace/touch_handler").TouchHandler;
-var KeyBinding = require("ace/keyboard/keybinding").KeyBinding;
-var EditSession = require("ace/edit_session").EditSession;
-var Search = require("ace/search").Search;
-var Range = require("ace/range").Range;
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-
-var Editor =function(renderer, session) {
- var container = renderer.getContainerElement();
- this.container = container;
- this.renderer = renderer;
-
- this.textInput = new TextInput(renderer.getTextAreaContainer(), this);
- this.keyBinding = new KeyBinding(this);
-
- // TODO detect touch event support
- if (useragent.isIPad) {
- //this.$mouseHandler = new TouchHandler(this);
- } else {
- this.$mouseHandler = new MouseHandler(this);
- }
-
- this.$blockScrolling = 0;
- this.$search = new Search().set({
- wrap: true
- });
-
- this.setSession(session || new EditSession(""));
-};
-
-(function(){
-
- oop.implement(this, EventEmitter);
-
- this.$forwardEvents = {
- gutterclick: 1,
- gutterdblclick: 1
- };
-
- this.$originalAddEventListener = this.addEventListener;
- this.$originalRemoveEventListener = this.removeEventListener;
-
- this.addEventListener = function(eventName, callback) {
- if (this.$forwardEvents[eventName]) {
- return this.renderer.addEventListener(eventName, callback);
- } else {
- return this.$originalAddEventListener(eventName, callback);
- }
- };
-
- this.removeEventListener = function(eventName, callback) {
- if (this.$forwardEvents[eventName]) {
- return this.renderer.removeEventListener(eventName, callback);
- } else {
- return this.$originalRemoveEventListener(eventName, callback);
- }
- };
-
- this.setKeyboardHandler = function(keyboardHandler) {
- this.keyBinding.setKeyboardHandler(keyboardHandler);
- };
-
- this.getKeyboardHandler = function() {
- return this.keyBinding.getKeyboardHandler();
- };
-
- this.setSession = function(session) {
- if (this.session == session)
- return;
-
- if (this.session) {
- var oldSession = this.session;
- this.session.removeEventListener("change", this.$onDocumentChange);
- this.session.removeEventListener("changeMode", this.$onChangeMode);
- this.session.removeEventListener("tokenizerUpdate", this.$onTokenizerUpdate);
- this.session.removeEventListener("changeTabSize", this.$onChangeTabSize);
- this.session.removeEventListener("changeWrapLimit", this.$onChangeWrapLimit);
- this.session.removeEventListener("changeWrapMode", this.$onChangeWrapMode);
- this.session.removeEventListener("onChangeFold", this.$onChangeFold);
- this.session.removeEventListener("changeFrontMarker", this.$onChangeFrontMarker);
- this.session.removeEventListener("changeBackMarker", this.$onChangeBackMarker);
- this.session.removeEventListener("changeBreakpoint", this.$onChangeBreakpoint);
- this.session.removeEventListener("changeAnnotation", this.$onChangeAnnotation);
- this.session.removeEventListener("changeOverwrite", this.$onCursorChange);
-
- var selection = this.session.getSelection();
- selection.removeEventListener("changeCursor", this.$onCursorChange);
- selection.removeEventListener("changeSelection", this.$onSelectionChange);
-
- this.session.setScrollTopRow(this.renderer.getScrollTopRow());
- }
-
- this.session = session;
-
- this.$onDocumentChange = this.onDocumentChange.bind(this);
- session.addEventListener("change", this.$onDocumentChange);
- this.renderer.setSession(session);
-
- this.$onChangeMode = this.onChangeMode.bind(this);
- session.addEventListener("changeMode", this.$onChangeMode);
-
- this.$onTokenizerUpdate = this.onTokenizerUpdate.bind(this);
- session.addEventListener("tokenizerUpdate", this.$onTokenizerUpdate);
-
- this.$onChangeTabSize = this.renderer.updateText.bind(this.renderer);
- session.addEventListener("changeTabSize", this.$onChangeTabSize);
-
- this.$onChangeWrapLimit = this.onChangeWrapLimit.bind(this);
- session.addEventListener("changeWrapLimit", this.$onChangeWrapLimit);
-
- this.$onChangeWrapMode = this.onChangeWrapMode.bind(this);
- session.addEventListener("changeWrapMode", this.$onChangeWrapMode);
-
- this.$onChangeFold = this.onChangeFold.bind(this);
- session.addEventListener("changeFold", this.$onChangeFold);
-
- this.$onChangeFrontMarker = this.onChangeFrontMarker.bind(this);
- this.session.addEventListener("changeFrontMarker", this.$onChangeFrontMarker);
-
- this.$onChangeBackMarker = this.onChangeBackMarker.bind(this);
- this.session.addEventListener("changeBackMarker", this.$onChangeBackMarker);
-
- this.$onChangeBreakpoint = this.onChangeBreakpoint.bind(this);
- this.session.addEventListener("changeBreakpoint", this.$onChangeBreakpoint);
-
- this.$onChangeAnnotation = this.onChangeAnnotation.bind(this);
- this.session.addEventListener("changeAnnotation", this.$onChangeAnnotation);
-
- this.$onCursorChange = this.onCursorChange.bind(this);
- this.session.addEventListener("changeOverwrite", this.$onCursorChange);
-
- this.selection = session.getSelection();
- this.selection.addEventListener("changeCursor", this.$onCursorChange);
-
- this.$onSelectionChange = this.onSelectionChange.bind(this);
- this.selection.addEventListener("changeSelection", this.$onSelectionChange);
-
- this.onChangeMode();
-
- this.onCursorChange();
- this.onSelectionChange();
- this.onChangeFrontMarker();
- this.onChangeBackMarker();
- this.onChangeBreakpoint();
- this.onChangeAnnotation();
- this.session.getUseWrapMode() && this.renderer.adjustWrapLimit();
- this.renderer.scrollToRow(session.getScrollTopRow());
- this.renderer.updateFull();
-
- this._dispatchEvent("changeSession", {
- session: session,
- oldSession: oldSession
- });
- };
-
- this.getSession = function() {
- return this.session;
- };
-
- this.getSelection = function() {
- return this.selection;
- };
-
- this.resize = function() {
- this.renderer.onResize();
- };
-
- this.setTheme = function(theme) {
- this.renderer.setTheme(theme);
- };
-
- this.getTheme = function() {
- return this.renderer.getTheme();
- };
-
- this.setStyle = function(style) {
- this.renderer.setStyle(style);
- };
-
- this.unsetStyle = function(style) {
- this.renderer.unsetStyle(style);
- };
-
- this.setFontSize = function(size) {
- this.container.style.fontSize = size;
- };
-
- this.$highlightBrackets = function() {
- if (this.session.$bracketHighlight) {
- this.session.removeMarker(this.session.$bracketHighlight);
- this.session.$bracketHighlight = null;
- }
-
- if (this.$highlightPending) {
- return;
- }
-
- // perform highlight async to not block the browser during navigation
- var self = this;
- this.$highlightPending = true;
- setTimeout(function() {
- self.$highlightPending = false;
-
- var pos = self.session.findMatchingBracket(self.getCursorPosition());
- if (pos) {
- var range = new Range(pos.row, pos.column, pos.row, pos.column+1);
- self.session.$bracketHighlight = self.session.addMarker(range, "ace_bracket", "text");
- }
- }, 10);
- };
-
- this.focus = function() {
- // Safari needs the timeout
- // iOS and Firefox need it called immediately
- // to be on the save side we do both
- // except for IE
- var _self = this;
- if (!useragent.isIE) {
- setTimeout(function() {
- _self.textInput.focus();
- });
- }
- this.textInput.focus();
- };
-
- this.isFocused = function() {
- return this.textInput.isFocused();
- };
-
- this.blur = function() {
- this.textInput.blur();
- };
-
- this.onFocus = function() {
- this.renderer.showCursor();
- this.renderer.visualizeFocus();
- this._dispatchEvent("focus");
- };
-
- this.onBlur = function() {
- this.renderer.hideCursor();
- this.renderer.visualizeBlur();
- this._dispatchEvent("blur");
- };
-
- this.onDocumentChange = function(e) {
- var delta = e.data;
- var range = delta.range;
-
- if (range.start.row == range.end.row && delta.action != "insertLines" && delta.action != "removeLines")
- var lastRow = range.end.row;
- else
- lastRow = Infinity;
- this.renderer.updateLines(range.start.row, lastRow);
-
- // update cursor because tab characters can influence the cursor position
- this.renderer.updateCursor();
- };
-
- this.onTokenizerUpdate = function(e) {
- var rows = e.data;
- this.renderer.updateLines(rows.first, rows.last);
- };
-
- this.onCursorChange = function(e) {
- this.renderer.updateCursor();
-
- if (!this.$blockScrolling) {
- this.renderer.scrollCursorIntoView();
- }
-
- // move text input over the cursor
- // this is required for iOS and IME
- this.renderer.moveTextAreaToCursor(this.textInput.getElement());
-
- this.$highlightBrackets();
- this.$updateHighlightActiveLine();
- };
-
- this.$updateHighlightActiveLine = function() {
- var session = this.getSession();
-
- if (session.$highlightLineMarker) {
- session.removeMarker(session.$highlightLineMarker);
- }
- session.$highlightLineMarker = null;
-
- if (this.getHighlightActiveLine() && (this.getSelectionStyle() != "line" || !this.selection.isMultiLine())) {
- var cursor = this.getCursorPosition(),
- foldLine = this.session.getFoldLine(cursor.row);
- var range;
- if (foldLine) {
- range = new Range(foldLine.start.row, 0, foldLine.end.row + 1, 0);
- } else {
- range = new Range(cursor.row, 0, cursor.row+1, 0);
- }
- session.$highlightLineMarker = session.addMarker(range, "ace_active_line", "background");
- }
- };
-
- this.onSelectionChange = function(e) {
- var session = this.getSession();
-
- if (session.$selectionMarker) {
- session.removeMarker(session.$selectionMarker);
- }
- session.$selectionMarker = null;
-
- if (!this.selection.isEmpty()) {
- var range = this.selection.getRange();
- var style = this.getSelectionStyle();
- session.$selectionMarker = session.addMarker(range, "ace_selection", style);
- } else {
- this.$updateHighlightActiveLine();
- }
-
- if (this.$highlightSelectedWord)
- this.session.getMode().highlightSelection(this);
- };
-
- this.onChangeFrontMarker = function() {
- this.renderer.updateFrontMarkers();
- };
-
- this.onChangeBackMarker = function() {
- this.renderer.updateBackMarkers();
- };
-
- this.onChangeBreakpoint = function() {
- this.renderer.setBreakpoints(this.session.getBreakpoints());
- };
-
- this.onChangeAnnotation = function() {
- this.renderer.setAnnotations(this.session.getAnnotations());
- };
-
- this.onChangeMode = function() {
- this.renderer.updateText()
- };
-
- this.onChangeWrapLimit = function() {
- this.renderer.updateFull();
- };
-
- this.onChangeWrapMode = function() {
- this.renderer.onResize(true);
- };
-
- this.onChangeFold = function() {
- // Update the active line marker as due to folding changes the current
- // line range on the screen might have changed.
- this.$updateHighlightActiveLine();
- // TODO: This might be too much updating. Okay for now.
- this.renderer.updateFull();
- };
-
- this.getCopyText = function() {
- if (!this.selection.isEmpty()) {
- return this.session.getTextRange(this.getSelectionRange());
- }
- else {
- return "";
- }
- };
-
- this.onCut = function() {
- if (this.$readOnly)
- return;
-
- if (!this.selection.isEmpty()) {
- this.session.remove(this.getSelectionRange())
- this.clearSelection();
- }
- };
-
- this.insert = function(text) {
- if (this.$readOnly)
- return;
-
- var session = this.session;
- var mode = session.getMode();
-
- var cursor = this.getCursorPosition();
-
- if (this.getBehavioursEnabled()) {
- // Get a transform if the current mode wants one.
- var transform = mode.transformAction(session.getState(cursor.row), 'insertion', this, session, text);
- if (transform)
- text = transform.text;
- }
-
- text = text.replace("\t", this.session.getTabString());
-
- // remove selected text
- if (!this.selection.isEmpty()) {
- var cursor = this.session.remove(this.getSelectionRange());
- this.clearSelection();
- }
- else if (this.session.getOverwrite()) {
- var range = new Range.fromPoints(cursor, cursor);
- range.end.column += text.length;
- this.session.remove(range);
- }
-
- this.clearSelection();
-
- var start = cursor.column;
- var lineState = session.getState(cursor.row);
- var shouldOutdent = mode.checkOutdent(lineState, session.getLine(cursor.row), text);
- var line = session.getLine(cursor.row);
- var lineIndent = mode.getNextLineIndent(lineState, line.slice(0, cursor.column), session.getTabString());
- var end = session.insert(cursor, text);
-
- if (transform && transform.selection) {
- if (transform.selection.length == 2) { // Transform relative to the current column
- this.selection.setSelectionRange(
- new Range(cursor.row, start + transform.selection[0],
- cursor.row, start + transform.selection[1]));
- } else { // Transform relative to the current row.
- this.selection.setSelectionRange(
- new Range(cursor.row + transform.selection[0],
- transform.selection[1],
- cursor.row + transform.selection[2],
- transform.selection[3]));
- }
- }
-
- var lineState = session.getState(cursor.row);
-
- // TODO disabled multiline auto indent
- // possibly doing the indent before inserting the text
- // if (cursor.row !== end.row) {
- if (session.getDocument().isNewLine(text)) {
- this.moveCursorTo(cursor.row+1, 0);
-
- var size = session.getTabSize();
- var minIndent = Number.MAX_VALUE;
-
- for (var row = cursor.row + 1; row <= end.row; ++row) {
- var indent = 0;
-
- line = session.getLine(row);
- for (var i = 0; i < line.length; ++i)
- if (line.charAt(i) == '\t')
- indent += size;
- else if (line.charAt(i) == ' ')
- indent += 1;
- else
- break;
- if (/[^\s]/.test(line))
- minIndent = Math.min(indent, minIndent);
- }
-
- for (var row = cursor.row + 1; row <= end.row; ++row) {
- var outdent = minIndent;
-
- line = session.getLine(row);
- for (var i = 0; i < line.length && outdent > 0; ++i)
- if (line.charAt(i) == '\t')
- outdent -= size;
- else if (line.charAt(i) == ' ')
- outdent -= 1;
- session.remove(new Range(row, 0, row, i));
- }
- session.indentRows(cursor.row + 1, end.row, lineIndent);
- } else {
- if (shouldOutdent) {
- mode.autoOutdent(lineState, session, cursor.row);
- }
- }
- };
-
- this.onTextInput = function(text, notPasted) {
- // In case the text was not pasted and we got only one character, then
- // handel it as a command key stroke.
- if (notPasted && text.length == 1) {
- // Note: The `null` as `keyCode` is important here, as there are
- // some checks in the code for `keyCode == 0` meaning the text comes
- // from the keyBinding.onTextInput code path.
- var handled = this.keyBinding.onCommandKey({}, 0, null, text);
-
- // Check if the text was handled. If not, then handled it as "normal"
- // text and insert it to the editor directly. This shouldn't be done
- // using the this.keyBinding.onTextInput(text) function, as it would
- // make the `text` get sent to the keyboardHandler twice, which might
- // turn out to be a bad thing in case there is a custome keyboard
- // handler like the StateHandler.
- if (!handled) {
- this.insert(text);
- }
- } else {
- this.keyBinding.onTextInput(text);
- }
- };
-
- this.onCommandKey = function(e, hashId, keyCode) {
- this.keyBinding.onCommandKey(e, hashId, keyCode);
- };
-
- this.setOverwrite = function(overwrite) {
- this.session.setOverwrite(overwrite);
- };
-
- this.getOverwrite = function() {
- return this.session.getOverwrite();
- };
-
- this.toggleOverwrite = function() {
- this.session.toggleOverwrite();
- };
-
- this.setScrollSpeed = function(speed) {
- this.$mouseHandler.setScrollSpeed(speed);
- };
-
- this.getScrollSpeed = function() {
- return this.$mouseHandler.getScrollSpeed()
- };
-
- this.$selectionStyle = "line";
- this.setSelectionStyle = function(style) {
- if (this.$selectionStyle == style) return;
-
- this.$selectionStyle = style;
- this.onSelectionChange();
- this._dispatchEvent("changeSelectionStyle", {data: style});
- };
-
- this.getSelectionStyle = function() {
- return this.$selectionStyle;
- };
-
- this.$highlightActiveLine = true;
- this.setHighlightActiveLine = function(shouldHighlight) {
- if (this.$highlightActiveLine == shouldHighlight) return;
-
- this.$highlightActiveLine = shouldHighlight;
- this.$updateHighlightActiveLine();
- };
-
- this.getHighlightActiveLine = function() {
- return this.$highlightActiveLine;
- };
-
- this.$highlightSelectedWord = true;
- this.setHighlightSelectedWord = function(shouldHighlight) {
- if (this.$highlightSelectedWord == shouldHighlight)
- return;
-
- this.$highlightSelectedWord = shouldHighlight;
- if (shouldHighlight)
- this.session.getMode().highlightSelection(this);
- else
- this.session.getMode().clearSelectionHighlight(this);
- };
-
- this.getHighlightSelectedWord = function() {
- return this.$highlightSelectedWord;
- };
-
- this.setShowInvisibles = function(showInvisibles) {
- if (this.getShowInvisibles() == showInvisibles)
- return;
-
- this.renderer.setShowInvisibles(showInvisibles);
- };
-
- this.getShowInvisibles = function() {
- return this.renderer.getShowInvisibles();
- };
-
- this.setShowPrintMargin = function(showPrintMargin) {
- this.renderer.setShowPrintMargin(showPrintMargin);
- };
-
- this.getShowPrintMargin = function() {
- return this.renderer.getShowPrintMargin();
- };
-
- this.setPrintMarginColumn = function(showPrintMargin) {
- this.renderer.setPrintMarginColumn(showPrintMargin);
- };
-
- this.getPrintMarginColumn = function() {
- return this.renderer.getPrintMarginColumn();
- };
-
- this.$readOnly = false;
- this.setReadOnly = function(readOnly) {
- this.$readOnly = readOnly;
- };
-
- this.getReadOnly = function() {
- return this.$readOnly;
- };
-
- this.$modeBehaviours = true;
- this.setBehavioursEnabled = function (enabled) {
- this.$modeBehaviours = enabled;
- }
-
- this.getBehavioursEnabled = function () {
- return this.$modeBehaviours;
- }
-
- this.removeRight = function() {
- if (this.$readOnly)
- return;
-
- if (this.selection.isEmpty()) {
- this.selection.selectRight();
- }
- this.session.remove(this.getSelectionRange())
- this.clearSelection();
- };
-
- this.removeLeft = function() {
- if (this.$readOnly)
- return;
-
- if (this.selection.isEmpty())
- this.selection.selectLeft();
-
- var range = this.getSelectionRange();
- if (this.getBehavioursEnabled()) {
- var session = this.session;
- var state = session.getState(range.start.row);
- var new_range = session.getMode().transformAction(state, 'deletion', this, session, range);
- if (new_range !== false) {
- range = new_range;
- }
- }
-
- this.session.remove(range);
- this.clearSelection();
- };
-
- this.removeWordRight = function() {
- if (this.$readOnly)
- return;
-
- if (this.selection.isEmpty())
- this.selection.selectWordRight();
-
- this.session.remove(this.getSelectionRange());
- this.clearSelection();
- };
-
- this.removeWordLeft = function() {
- if (this.$readOnly)
- return;
-
- if (this.selection.isEmpty())
- this.selection.selectWordLeft();
-
- this.session.remove(this.getSelectionRange());
- this.clearSelection();
- };
-
- this.removeToLineStart = function() {
- if (this.$readOnly)
- return;
-
- if (this.selection.isEmpty())
- this.selection.selectLineStart();
-
- this.session.remove(this.getSelectionRange());
- this.clearSelection();
- };
-
- this.removeToLineEnd = function() {
- if (this.$readOnly)
- return;
-
- if (this.selection.isEmpty())
- this.selection.selectLineEnd();
-
- var range = this.getSelectionRange();
- if (range.start.column == range.end.column && range.start.row == range.end.row) {
- range.end.column = 0;
- range.end.row++;
- }
-
- this.session.remove(range);
- this.clearSelection();
- };
-
- this.splitLine = function() {
- if (this.$readOnly)
- return;
-
- if (!this.selection.isEmpty()) {
- this.session.remove(this.getSelectionRange());
- this.clearSelection();
- }
-
- var cursor = this.getCursorPosition();
- this.insert("\n");
- this.moveCursorToPosition(cursor);
- };
-
- this.transposeLetters = function() {
- if (this.$readOnly)
- return;
-
- if (!this.selection.isEmpty()) {
- return;
- }
-
- var cursor = this.getCursorPosition();
- var column = cursor.column;
- if (column == 0)
- return;
-
- var line = this.session.getLine(cursor.row);
- if (column < line.length) {
- var swap = line.charAt(column) + line.charAt(column-1);
- var range = new Range(cursor.row, column-1, cursor.row, column+1)
- }
- else {
- var swap = line.charAt(column-1) + line.charAt(column-2);
- var range = new Range(cursor.row, column-2, cursor.row, column)
- }
- this.session.replace(range, swap);
- };
-
- this.indent = function() {
- if (this.$readOnly)
- return;
-
- var session = this.session;
- var range = this.getSelectionRange();
-
- if (range.start.row < range.end.row || range.start.column < range.end.column) {
- var rows = this.$getSelectedRows();
- session.indentRows(rows.first, rows.last, "\t");
- } else {
- var indentString;
-
- if (this.session.getUseSoftTabs()) {
- var size = session.getTabSize(),
- position = this.getCursorPosition(),
- column = session.documentToScreenColumn(position.row, position.column),
- count = (size - column % size);
-
- indentString = lang.stringRepeat(" ", count);
- } else
- indentString = "\t";
- return this.onTextInput(indentString);
- }
- };
-
- this.blockOutdent = function() {
- if (this.$readOnly)
- return;
-
- var selection = this.session.getSelection();
- this.session.outdentRows(selection.getRange());
- };
-
- this.toggleCommentLines = function() {
- if (this.$readOnly)
- return;
-
- var state = this.session.getState(this.getCursorPosition().row);
- var rows = this.$getSelectedRows()
- this.session.getMode().toggleCommentLines(state, this.session, rows.first, rows.last);
- };
-
- this.removeLines = function() {
- if (this.$readOnly)
- return;
-
- var rows = this.$getSelectedRows();
- if (rows.last == 0 || rows.last+1 < this.session.getLength())
- var range = new Range(rows.first, 0, rows.last+1, 0)
- else
- var range = new Range(
- rows.first-1, this.session.getLine(rows.first).length,
- rows.last, this.session.getLine(rows.last).length
- );
- this.session.remove(range);
- this.clearSelection();
- };
-
- this.moveLinesDown = function() {
- if (this.$readOnly)
- return;
-
- this.$moveLines(function(firstRow, lastRow) {
- return this.session.moveLinesDown(firstRow, lastRow);
- });
- };
-
- this.moveLinesUp = function() {
- if (this.$readOnly)
- return;
-
- this.$moveLines(function(firstRow, lastRow) {
- return this.session.moveLinesUp(firstRow, lastRow);
- });
- };
-
- this.moveText = function(range, toPosition) {
- if (this.$readOnly)
- return null;
-
- return this.session.moveText(range, toPosition);
- };
-
- this.copyLinesUp = function() {
- if (this.$readOnly)
- return;
-
- this.$moveLines(function(firstRow, lastRow) {
- this.session.duplicateLines(firstRow, lastRow);
- return 0;
- });
- };
-
- this.copyLinesDown = function() {
- if (this.$readOnly)
- return;
-
- this.$moveLines(function(firstRow, lastRow) {
- return this.session.duplicateLines(firstRow, lastRow);
- });
- };
-
-
- this.$moveLines = function(mover) {
- var rows = this.$getSelectedRows();
-
- var linesMoved = mover.call(this, rows.first, rows.last);
-
- var selection = this.selection;
- selection.setSelectionAnchor(rows.last+linesMoved+1, 0);
- selection.$moveSelection(function() {
- selection.moveCursorTo(rows.first+linesMoved, 0);
- });
- };
-
- this.$getSelectedRows = function() {
- var range = this.getSelectionRange().collapseRows();
-
- return {
- first: range.start.row,
- last: range.end.row
- };
- };
-
- this.onCompositionStart = function(text) {
- this.renderer.showComposition(this.getCursorPosition());
- };
-
- this.onCompositionUpdate = function(text) {
- this.renderer.setCompositionText(text);
- };
-
- this.onCompositionEnd = function() {
- this.renderer.hideComposition();
- };
-
-
- this.getFirstVisibleRow = function() {
- return this.renderer.getFirstVisibleRow();
- };
-
- this.getLastVisibleRow = function() {
- return this.renderer.getLastVisibleRow();
- };
-
- this.isRowVisible = function(row) {
- return (row >= this.getFirstVisibleRow() && row <= this.getLastVisibleRow());
- };
-
- this.$getVisibleRowCount = function() {
- return this.renderer.getScrollBottomRow() - this.renderer.getScrollTopRow() + 1;
- };
-
- this.$getPageDownRow = function() {
- return this.renderer.getScrollBottomRow();
- };
-
- this.$getPageUpRow = function() {
- var firstRow = this.renderer.getScrollTopRow();
- var lastRow = this.renderer.getScrollBottomRow();
-
- return firstRow - (lastRow - firstRow);
- };
-
- this.selectPageDown = function() {
- var row = this.$getPageDownRow() + Math.floor(this.$getVisibleRowCount() / 2);
-
- this.scrollPageDown();
-
- var selection = this.getSelection();
- var leadScreenPos = this.session.documentToScreenPosition(selection.getSelectionLead());
- var dest = this.session.screenToDocumentPosition(row, leadScreenPos.column);
- selection.selectTo(dest.row, dest.column);
- };
-
- this.selectPageUp = function() {
- var visibleRows = this.renderer.getScrollTopRow() - this.renderer.getScrollBottomRow();
- var row = this.$getPageUpRow() + Math.round(visibleRows / 2);
-
- this.scrollPageUp();
-
- var selection = this.getSelection();
- var leadScreenPos = this.session.documentToScreenPosition(selection.getSelectionLead());
- var dest = this.session.screenToDocumentPosition(row, leadScreenPos.column);
- selection.selectTo(dest.row, dest.column);
- };
-
- this.gotoPageDown = function() {
- var row = this.$getPageDownRow();
- var column = this.getCursorPositionScreen().column;
-
- this.scrollToRow(row);
- this.getSelection().moveCursorToScreen(row, column);
- };
-
- this.gotoPageUp = function() {
- var row = this.$getPageUpRow();
- var column = this.getCursorPositionScreen().column;
-
- this.scrollToRow(row);
- this.getSelection().moveCursorToScreen(row, column);
- };
-
- this.scrollPageDown = function() {
- this.scrollToRow(this.$getPageDownRow());
- };
-
- this.scrollPageUp = function() {
- this.renderer.scrollToRow(this.$getPageUpRow());
- };
-
- this.scrollToRow = function(row) {
- this.renderer.scrollToRow(row);
- };
-
- this.scrollToLine = function(line, center) {
- this.renderer.scrollToLine(line, center);
- };
-
- this.centerSelection = function() {
- var range = this.getSelectionRange();
- var line = Math.floor(range.start.row + (range.end.row - range.start.row) / 2);
- this.renderer.scrollToLine(line, true);
- };
-
- this.getCursorPosition = function() {
- return this.selection.getCursor();
- };
-
- this.getCursorPositionScreen = function() {
- return this.session.documentToScreenPosition(this.getCursorPosition());
- };
-
- this.getSelectionRange = function() {
- return this.selection.getRange();
- };
-
-
- this.selectAll = function() {
- this.$blockScrolling += 1;
- this.selection.selectAll();
- this.$blockScrolling -= 1;
- };
-
- this.clearSelection = function() {
- this.selection.clearSelection();
- };
-
- this.moveCursorTo = function(row, column) {
- this.selection.moveCursorTo(row, column);
- };
-
- this.moveCursorToPosition = function(pos) {
- this.selection.moveCursorToPosition(pos);
- };
-
-
- this.gotoLine = function(lineNumber, column) {
- this.selection.clearSelection();
-
- this.$blockScrolling += 1;
- this.moveCursorTo(lineNumber-1, column || 0);
- this.$blockScrolling -= 1;
-
- if (!this.isRowVisible(this.getCursorPosition().row)) {
- this.scrollToLine(lineNumber, true);
- }
- },
-
- this.navigateTo = function(row, column) {
- this.clearSelection();
- this.moveCursorTo(row, column);
- };
-
- this.navigateUp = function(times) {
- this.selection.clearSelection();
- times = times || 1;
- this.selection.moveCursorBy(-times, 0);
- };
-
- this.navigateDown = function(times) {
- this.selection.clearSelection();
- times = times || 1;
- this.selection.moveCursorBy(times, 0);
- };
-
- this.navigateLeft = function(times) {
- if (!this.selection.isEmpty()) {
- var selectionStart = this.getSelectionRange().start;
- this.moveCursorToPosition(selectionStart);
- }
- else {
- times = times || 1;
- while (times--) {
- this.selection.moveCursorLeft();
- }
- }
- this.clearSelection();
- };
-
- this.navigateRight = function(times) {
- if (!this.selection.isEmpty()) {
- var selectionEnd = this.getSelectionRange().end;
- this.moveCursorToPosition(selectionEnd);
- }
- else {
- times = times || 1;
- while (times--) {
- this.selection.moveCursorRight();
- }
- }
- this.clearSelection();
- };
-
- this.navigateLineStart = function() {
- this.selection.moveCursorLineStart();
- this.clearSelection();
- };
-
- this.navigateLineEnd = function() {
- this.selection.moveCursorLineEnd();
- this.clearSelection();
- };
-
- this.navigateFileEnd = function() {
- this.selection.moveCursorFileEnd();
- this.clearSelection();
- };
-
- this.navigateFileStart = function() {
- this.selection.moveCursorFileStart();
- this.clearSelection();
- };
-
- this.navigateWordRight = function() {
- this.selection.moveCursorWordRight();
- this.clearSelection();
- };
-
- this.navigateWordLeft = function() {
- this.selection.moveCursorWordLeft();
- this.clearSelection();
- };
-
- this.replace = function(replacement, options) {
- if (options)
- this.$search.set(options);
-
- var range = this.$search.find(this.session);
- if (!range)
- return;
-
- this.$tryReplace(range, replacement);
- if (range !== null)
- this.selection.setSelectionRange(range);
- },
-
- this.replaceAll = function(replacement, options) {
- if (options) {
- this.$search.set(options);
- }
-
- var ranges = this.$search.findAll(this.session);
- if (!ranges.length)
- return;
-
- var selection = this.getSelectionRange();
- this.clearSelection();
- this.selection.moveCursorTo(0, 0);
-
- this.$blockScrolling += 1;
- for (var i = ranges.length - 1; i >= 0; --i)
- this.$tryReplace(ranges[i], replacement);
-
- this.selection.setSelectionRange(selection);
- this.$blockScrolling -= 1;
- },
-
- this.$tryReplace = function(range, replacement) {
- var input = this.session.getTextRange(range);
- var replacement = this.$search.replace(input, replacement);
- if (replacement !== null) {
- range.end = this.session.replace(range, replacement);
- return range;
- } else {
- return null;
- }
- };
-
- this.getLastSearchOptions = function() {
- return this.$search.getOptions();
- };
-
- this.find = function(needle, options) {
- this.clearSelection();
- options = options || {};
- options.needle = needle;
- this.$search.set(options);
- this.$find();
- },
-
- this.findNext = function(options) {
- options = options || {};
- if (typeof options.backwards == "undefined")
- options.backwards = false;
- this.$search.set(options);
- this.$find();
- };
-
- this.findPrevious = function(options) {
- options = options || {};
- if (typeof options.backwards == "undefined")
- options.backwards = true;
- this.$search.set(options);
- this.$find();
- };
-
- this.$find = function(backwards) {
- if (!this.selection.isEmpty()) {
- this.$search.set({needle: this.session.getTextRange(this.getSelectionRange())});
- }
-
- if (typeof backwards != "undefined")
- this.$search.set({backwards: backwards});
-
- var range = this.$search.find(this.session);
- if (range) {
- this.gotoLine(range.end.row+1, range.end.column);
- this.selection.setSelectionRange(range);
- }
- };
-
- this.undo = function() {
- this.session.getUndoManager().undo();
- };
-
- this.redo = function() {
- this.session.getUndoManager().redo();
- };
-
- this.destroy = function() {
- this.renderer.destroy();
- }
-
-}).call(Editor.prototype);
-
-
-exports.Editor = Editor;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Mihai Sucan <mihai DOT sucan AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/keyboard/textinput', ['require', 'exports', 'module' , 'pilot/event', 'pilot/useragent', 'pilot/dom'], function(require, exports, module) {
-
-var event = require("pilot/event");
-var useragent = require("pilot/useragent");
-var dom = require("pilot/dom");
-
-var TextInput = function(parentNode, host) {
-
- var text = dom.createElement("textarea");
- text.style.left = "-10000px";
- parentNode.appendChild(text);
-
- var PLACEHOLDER = String.fromCharCode(0);
- sendText();
-
- var inCompostion = false;
- var copied = false;
- var pasted = false;
- var tempStyle = '';
-
- function sendText(valueToSend) {
- if (!copied) {
- var value = valueToSend || text.value;
- if (value) {
- if (value.charCodeAt(value.length-1) == PLACEHOLDER.charCodeAt(0)) {
- value = value.slice(0, -1);
- if (value)
- host.onTextInput(value, !pasted);
- }
- else {
- host.onTextInput(value, !pasted);
- }
-
- // If editor is no longer focused we quit immediately, since
- // it means that something else is in charge now.
- if (!isFocused())
- return false;
- }
- }
-
- copied = false;
- pasted = false;
-
- // Safari doesn't fire copy events if no text is selected
- text.value = PLACEHOLDER;
- text.select();
- }
-
- var onTextInput = function(e) {
- setTimeout(function () {
- if (!inCompostion)
- sendText(e.data);
- }, 0);
- };
-
- var onKeyPress = function(e) {
- if (useragent.isIE && text.value.charCodeAt(0) > 128) return;
- setTimeout(function() {
- if (!inCompostion)
- sendText();
- }, 0);
- };
-
- var onCompositionStart = function(e) {
- inCompostion = true;
- host.onCompositionStart();
- if (!useragent.isGecko) setTimeout(onCompositionUpdate, 0);
- };
-
- var onCompositionUpdate = function() {
- if (!inCompostion) return;
- host.onCompositionUpdate(text.value);
- };
-
- var onCompositionEnd = function(e) {
- inCompostion = false;
- host.onCompositionEnd();
- };
-
- var onCopy = function(e) {
- copied = true;
- var copyText = host.getCopyText();
- if(copyText)
- text.value = copyText;
- else
- e.preventDefault();
- text.select();
- setTimeout(function () {
- sendText();
- }, 0);
- };
-
- var onCut = function(e) {
- copied = true;
- var copyText = host.getCopyText();
- if(copyText) {
- text.value = copyText;
- host.onCut();
- } else
- e.preventDefault();
- text.select();
- setTimeout(function () {
- sendText();
- }, 0);
- };
-
- event.addCommandKeyListener(text, host.onCommandKey.bind(host));
- if (useragent.isIE) {
- var keytable = { 13:1, 27:1 };
- event.addListener(text, "keyup", function (e) {
- if (inCompostion && (!text.value || keytable[e.keyCode]))
- setTimeout(onCompositionEnd, 0);
- if ((text.value.charCodeAt(0)|0) < 129) {
- return;
- };
- inCompostion ? onCompositionUpdate() : onCompositionStart();
- });
- };
-
- if (text.attachEvent) {
- // Old IE + Opera
- event.addListener(text, "propertychange", onKeyPress);
- }
- else {
- if (useragent.isChrome || useragent.isSafari)
- event.addListener(text, "textInput", onTextInput);
- else if (useragent.isIE)
- // IE9
- event.addListener(text, "textinput", onTextInput);
- else
- // All browsers except old IE
- event.addListener(text, "input", onTextInput);
- }
-
-
- event.addListener(text, "paste", function(e) {
- // Mark that the next input text comes from past.
- pasted = true;
- // Some browsers support the event.clipboardData API. Use this to get
- // the pasted content which increases speed if pasting a lot of lines.
- if (e.clipboardData && e.clipboardData.getData) {
- sendText(e.clipboardData.getData("text/plain"));
- e.preventDefault();
- }
- else {
- // If a browser doesn't support any of the things above, use the regular
- // method to detect the pasted input.
- onKeyPress();
- }
- });
-
- if (useragent.isIE) {
- event.addListener(text, "beforecopy", function(e) {
- var copyText = host.getCopyText();
- if(copyText)
- clipboardData.setData("Text", copyText);
- else
- e.preventDefault();
- });
- event.addListener(parentNode, "keydown", function(e) {
- if (e.ctrlKey && e.keyCode == 88) {
- var copyText = host.getCopyText();
- if (copyText) {
- clipboardData.setData("Text", copyText);
- host.onCut();
- }
- event.preventDefault(e)
- }
- });
- }
- else {
- event.addListener(text, "copy", onCopy);
- event.addListener(text, "cut", onCut);
- }
-
- event.addListener(text, "compositionstart", onCompositionStart);
- if (useragent.isGecko) {
- event.addListener(text, "text", onCompositionUpdate);
- };
- if (useragent.isWebKit) {
- event.addListener(text, "keyup", onCompositionUpdate);
- };
- event.addListener(text, "compositionend", onCompositionEnd);
-
- event.addListener(text, "blur", function() {
- host.onBlur();
- });
-
- event.addListener(text, "focus", function() {
- host.onFocus();
- text.select();
- });
-
- this.focus = function() {
- host.onFocus();
- text.select();
- text.focus();
- };
-
- this.blur = function() {
- text.blur();
- };
-
- function isFocused() {
- return document.activeElement === text;
- };
- this.isFocused = isFocused;
-
- this.getElement = function() {
- return text;
- };
-
- this.onContextMenu = function(mousePos, isEmpty){
- if (mousePos) {
- if(!tempStyle)
- tempStyle = text.style.cssText;
- text.style.cssText = 'position:fixed; z-index:1000;' +
- 'left:' + (mousePos.x - 2) + 'px; top:' + (mousePos.y - 2) + 'px;'
-
- }
- if (isEmpty)
- text.value='';
- }
-
- this.onContextMenuClose = function(){
- setTimeout(function () {
- if (tempStyle) {
- text.style.cssText = tempStyle;
- tempStyle = '';
- }
- sendText();
- }, 0);
- }
-};
-
-exports.TextInput = TextInput;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Mihai Sucan <mihai DOT sucan AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/mouse_handler', ['require', 'exports', 'module' , 'pilot/event', 'pilot/dom', 'pilot/browser_focus'], function(require, exports, module) {
-
-var event = require("pilot/event");
-var dom = require("pilot/dom");
-var BrowserFocus = require("pilot/browser_focus").BrowserFocus;
-
-var STATE_UNKNOWN = 0;
-var STATE_SELECT = 1;
-var STATE_DRAG = 2;
-
-var DRAG_TIMER = 250; // milliseconds
-var DRAG_OFFSET = 5; // pixels
-
-var MouseHandler = function(editor) {
- this.editor = editor;
-
- this.browserFocus = new BrowserFocus();
- event.addListener(editor.container, "mousedown", function(e) {
- editor.focus();
- return event.preventDefault(e);
- });
- event.addListener(editor.container, "selectstart", function(e) {
- return event.preventDefault(e);
- });
-
- var mouseTarget = editor.renderer.getMouseEventTarget();
- event.addListener(mouseTarget, "mousedown", this.onMouseDown.bind(this));
- event.addMultiMouseDownListener(mouseTarget, 0, 2, 500, this.onMouseDoubleClick.bind(this));
- event.addMultiMouseDownListener(mouseTarget, 0, 3, 600, this.onMouseTripleClick.bind(this));
- event.addMultiMouseDownListener(mouseTarget, 0, 4, 600, this.onMouseQuadClick.bind(this));
- event.addMouseWheelListener(mouseTarget, this.onMouseWheel.bind(this));
-};
-
-(function() {
-
- this.$scrollSpeed = 1;
- this.setScrollSpeed = function(speed) {
- this.$scrollSpeed = speed;
- };
-
- this.getScrollSpeed = function() {
- return this.$scrollSpeed;
- };
-
- this.$getEventPosition = function(e) {
- var pageX = event.getDocumentX(e);
- var pageY = event.getDocumentY(e);
- var pos = this.editor.renderer.screenToTextCoordinates(pageX, pageY);
- pos.row = Math.max(0, Math.min(pos.row, this.editor.session.getLength()-1));
- return pos;
- };
-
- this.$distance = function(ax, ay, bx, by) {
- return Math.sqrt(Math.pow(bx - ax, 2) + Math.pow(by - ay, 2));
- };
-
- this.onMouseDown = function(e) {
- // if this click caused the editor to be focused ignore the click
- // for selection and cursor placement
- if (
- !this.browserFocus.isFocused()
- || new Date().getTime() - this.browserFocus.lastFocus < 20
- || !this.editor.isFocused()
- )
- return;
-
- var pageX = event.getDocumentX(e);
- var pageY = event.getDocumentY(e);
- var pos = this.$getEventPosition(e);
- var editor = this.editor;
- var self = this;
- var selectionRange = editor.getSelectionRange();
- var selectionEmpty = selectionRange.isEmpty();
- var state = STATE_UNKNOWN;
- var inSelection = false;
-
- var button = event.getButton(e);
- if (button !== 0) {
- if (selectionEmpty) {
- editor.moveCursorToPosition(pos);
- }
- if(button == 2) {
- editor.textInput.onContextMenu({x: pageX, y: pageY}, selectionEmpty);
- event.capture(editor.container, function(){}, editor.textInput.onContextMenuClose);
- }
- return;
- } else {
- // Select the fold as the user clicks it.
- var fold = editor.session.getFoldAt(pos.row, pos.column, 1);
- if (fold) {
- editor.selection.setSelectionRange(fold.range);
- return;
- }
-
- inSelection = !editor.getReadOnly()
- && !selectionEmpty
- && selectionRange.contains(pos.row, pos.column);
- }
-
- if (!inSelection) {
- // Directly pick STATE_SELECT, since the user is not clicking inside
- // a selection.
- onStartSelect(pos);
- }
-
- var mousePageX, mousePageY;
- var overwrite = editor.getOverwrite();
- var mousedownTime = (new Date()).getTime();
- var dragCursor, dragRange;
-
- var onMouseSelection = function(e) {
- mousePageX = event.getDocumentX(e);
- mousePageY = event.getDocumentY(e);
- };
-
- var onMouseSelectionEnd = function() {
- clearInterval(timerId);
- if (state == STATE_UNKNOWN)
- onStartSelect(pos);
- else if (state == STATE_DRAG)
- onMouseDragSelectionEnd();
-
- self.$clickSelection = null;
- state = STATE_UNKNOWN;
- };
-
- var onMouseDragSelectionEnd = function() {
- dom.removeCssClass(editor.container, "ace_dragging");
- editor.session.removeMarker(dragSelectionMarker);
-
- if (!self.$clickSelection) {
- if (!dragCursor) {
- editor.moveCursorToPosition(pos);
- editor.selection.clearSelection(pos.row, pos.column);
- }
- }
-
- if (!dragCursor)
- return;
-
- if (dragRange.contains(dragCursor.row, dragCursor.column)) {
- dragCursor = null;
- return;
- }
-
- editor.clearSelection();
- var newRange = editor.moveText(dragRange, dragCursor);
- if (!newRange) {
- dragCursor = null;
- return;
- }
-
- editor.selection.setSelectionRange(newRange);
- };
-
- var onSelectionInterval = function() {
- if (mousePageX === undefined || mousePageY === undefined)
- return;
-
- if (state == STATE_UNKNOWN) {
- var distance = self.$distance(pageX, pageY, mousePageX, mousePageY);
- var time = (new Date()).getTime();
-
-
- if (distance > DRAG_OFFSET) {
- state = STATE_SELECT;
- var cursor = editor.renderer.screenToTextCoordinates(mousePageX, mousePageY);
- cursor.row = Math.max(0, Math.min(cursor.row, editor.session.getLength()-1));
- onStartSelect(cursor);
- } else if ((time - mousedownTime) > DRAG_TIMER) {
- state = STATE_DRAG;
- dragRange = editor.getSelectionRange();
- var style = editor.getSelectionStyle();
- dragSelectionMarker = editor.session.addMarker(dragRange, "ace_selection", style);
- editor.clearSelection();
- dom.addCssClass(editor.container, "ace_dragging");
- }
-
- }
-
- if (state == STATE_DRAG)
- onDragSelectionInterval();
- else if (state == STATE_SELECT)
- onUpdateSelectionInterval();
- };
-
- function onStartSelect(pos) {
- if (e.shiftKey)
- editor.selection.selectToPosition(pos)
- else {
- if (!self.$clickSelection) {
- editor.moveCursorToPosition(pos);
- editor.selection.clearSelection(pos.row, pos.column);
- }
- }
- state = STATE_SELECT;
- }
-
- var onUpdateSelectionInterval = function() {
- var cursor = editor.renderer.screenToTextCoordinates(mousePageX, mousePageY);
- cursor.row = Math.max(0, Math.min(cursor.row, editor.session.getLength()-1));
-
- if (self.$clickSelection) {
- if (self.$clickSelection.contains(cursor.row, cursor.column)) {
- editor.selection.setSelectionRange(self.$clickSelection);
- } else {
- if (self.$clickSelection.compare(cursor.row, cursor.column) == -1) {
- var anchor = self.$clickSelection.end;
- } else {
- var anchor = self.$clickSelection.start;
- }
- editor.selection.setSelectionAnchor(anchor.row, anchor.column);
- editor.selection.selectToPosition(cursor);
- }
- }
- else {
- editor.selection.selectToPosition(cursor);
- }
-
- editor.renderer.scrollCursorIntoView();
- };
-
- var onDragSelectionInterval = function() {
- dragCursor = editor.renderer.screenToTextCoordinates(mousePageX, mousePageY);
- dragCursor.row = Math.max(0, Math.min(dragCursor.row,
- editor.session.getLength() - 1));
-
- editor.moveCursorToPosition(dragCursor);
- };
-
- event.capture(editor.container, onMouseSelection, onMouseSelectionEnd);
- var timerId = setInterval(onSelectionInterval, 20);
-
- return event.preventDefault(e);
- };
-
- this.onMouseDoubleClick = function(e) {
- var editor = this.editor;
- var pos = this.$getEventPosition(e);
-
- // If the user dclicked on a fold, then expand it.
- var fold = editor.session.getFoldAt(pos.row, pos.column, 1);
- if (fold) {
- editor.session.expandFold(fold);
- } else {
- editor.moveCursorToPosition(pos);
- editor.selection.selectWord();
- this.$clickSelection = editor.getSelectionRange();
- }
- };
-
- this.onMouseTripleClick = function(e) {
- var pos = this.$getEventPosition(e);
- this.editor.moveCursorToPosition(pos);
- this.editor.selection.selectLine();
- this.$clickSelection = this.editor.getSelectionRange();
- };
-
- this.onMouseQuadClick = function(e) {
- this.editor.selectAll();
- this.$clickSelection = this.editor.getSelectionRange();
- };
-
- this.onMouseWheel = function(e) {
- var speed = this.$scrollSpeed * 2;
-
- this.editor.renderer.scrollBy(e.wheelX * speed, e.wheelY * speed);
- return event.preventDefault(e);
- };
-
-
-}).call(MouseHandler.prototype);
-
-exports.MouseHandler = MouseHandler;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Irakli Gozalishvili <rfobic@gmail.com> (http://jeditoolkit.com)
- * Julian Viereck <julian.viereck@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/browser_focus', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/event', 'pilot/event_emitter'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var event = require("pilot/event");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-
-/**
- * This class keeps track of the focus state of the given window.
- * Focus changes for example when the user switches a browser tab,
- * goes to the location bar or switches to another application.
- */
-var BrowserFocus = function(win) {
- win = win || window;
-
- this.lastFocus = new Date().getTime();
- this._isFocused = true;
-
- var _self = this;
- event.addListener(win, "blur", function(e) {
- _self._setFocused(false);
- });
-
- event.addListener(win, "focus", function(e) {
- _self._setFocused(true);
- });
-};
-
-(function(){
-
- oop.implement(this, EventEmitter);
-
- this.isFocused = function() {
- return this._isFocused;
- };
-
- this._setFocused = function(isFocused) {
- if (this._isFocused == isFocused)
- return;
-
- if (isFocused)
- this.lastFocus = new Date().getTime();
-
- this._isFocused = isFocused;
- this._emit("changeFocus");
- };
-
-}).call(BrowserFocus.prototype);
-
-
-exports.BrowserFocus = BrowserFocus;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Julian Viereck <julian.viereck@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/keyboard/keybinding', ['require', 'exports', 'module' , 'pilot/useragent', 'pilot/keys', 'pilot/event', 'pilot/settings', 'pilot/canon', 'ace/commands/default_commands'], function(require, exports, module) {
-
-var useragent = require("pilot/useragent");
-var keyUtil = require("pilot/keys");
-var event = require("pilot/event");
-var settings = require("pilot/settings").settings;
-var canon = require("pilot/canon");
-require("ace/commands/default_commands");
-
-var KeyBinding = function(editor) {
- this.$editor = editor;
- this.$data = { };
- this.$keyboardHandler = null;
-};
-
-(function() {
- this.setKeyboardHandler = function(keyboardHandler) {
- if (this.$keyboardHandler != keyboardHandler) {
- this.$data = { };
- this.$keyboardHandler = keyboardHandler;
- }
- };
-
- this.getKeyboardHandler = function() {
- return this.$keyboardHandler;
- };
-
- this.$callKeyboardHandler = function (e, hashId, keyOrText, keyCode) {
- var env = {editor: this.$editor},
- toExecute;
-
- if (this.$keyboardHandler) {
- toExecute =
- this.$keyboardHandler.handleKeyboard(this.$data, hashId, keyOrText, keyCode, e);
- }
-
- // If there is nothing to execute yet, then use the default keymapping.
- if (!toExecute || !toExecute.command) {
- if (hashId != 0 || keyCode != 0) {
- toExecute = {
- command: canon.findKeyCommand(env, "editor", hashId, keyOrText)
- }
- } else {
- toExecute = {
- command: "inserttext",
- args: {
- text: keyOrText
- }
- }
- }
- }
-
- var success = false;
- if (toExecute) {
- success = canon.exec(toExecute.command,
- env, "editor", toExecute.args);
- if (success) {
- event.stopEvent(e);
- }
- }
- return success;
- };
-
- this.onCommandKey = function(e, hashId, keyCode, keyString) {
- // In case there is no keyString, try to interprete the keyCode.
- if (!keyString) {
- keyString = keyUtil.keyCodeToString(keyCode);
- }
- return this.$callKeyboardHandler(e, hashId, keyString, keyCode);
- };
-
- this.onTextInput = function(text) {
- return this.$callKeyboardHandler({}, 0, text, 0);
- }
-
-}).call(KeyBinding.prototype);
-
-exports.KeyBinding = KeyBinding;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Julian Viereck <julian.viereck@gmail.com>
- * Mihai Sucan <mihai.sucan@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/commands/default_commands', ['require', 'exports', 'module' , 'pilot/lang', 'pilot/canon'], function(require, exports, module) {
-
-var lang = require("pilot/lang");
-var canon = require("pilot/canon");
-
-function bindKey(win, mac) {
- return {
- win: win,
- mac: mac,
- sender: "editor"
- };
-}
-
-canon.addCommand({
- name: "null",
- exec: function(env, args, request) { }
-});
-
-canon.addCommand({
- name: "selectall",
- bindKey: bindKey("Ctrl-A", "Command-A"),
- exec: function(env, args, request) { env.editor.selectAll(); }
-});
-canon.addCommand({
- name: "removeline",
- bindKey: bindKey("Ctrl-D", "Command-D"),
- exec: function(env, args, request) { env.editor.removeLines(); }
-});
-canon.addCommand({
- name: "gotoline",
- bindKey: bindKey("Ctrl-L", "Command-L"),
- exec: function(env, args, request) {
- var line = parseInt(prompt("Enter line number:"));
- if (!isNaN(line)) {
- env.editor.gotoLine(line);
- }
- }
-});
-canon.addCommand({
- name: "togglecomment",
- bindKey: bindKey("Ctrl-7", "Command-7"),
- exec: function(env, args, request) { env.editor.toggleCommentLines(); }
-});
-canon.addCommand({
- name: "findnext",
- bindKey: bindKey("Ctrl-K", "Command-G"),
- exec: function(env, args, request) { env.editor.findNext(); }
-});
-canon.addCommand({
- name: "findprevious",
- bindKey: bindKey("Ctrl-Shift-K", "Command-Shift-G"),
- exec: function(env, args, request) { env.editor.findPrevious(); }
-});
-canon.addCommand({
- name: "find",
- bindKey: bindKey("Ctrl-F", "Command-F"),
- exec: function(env, args, request) {
- var needle = prompt("Find:");
- env.editor.find(needle);
- }
-});
-canon.addCommand({
- name: "replace",
- bindKey: bindKey("Ctrl-R", "Command-Option-F"),
- exec: function(env, args, request) {
- var needle = prompt("Find:");
- if (!needle)
- return;
- var replacement = prompt("Replacement:");
- if (!replacement)
- return;
- env.editor.replace(replacement, {needle: needle});
- }
-});
-canon.addCommand({
- name: "replaceall",
- bindKey: bindKey("Ctrl-Shift-R", "Command-Shift-Option-F"),
- exec: function(env, args, request) {
- var needle = prompt("Find:");
- if (!needle)
- return;
- var replacement = prompt("Replacement:");
- if (!replacement)
- return;
- env.editor.replaceAll(replacement, {needle: needle});
- }
-});
-canon.addCommand({
- name: "undo",
- bindKey: bindKey("Ctrl-Z", "Command-Z"),
- exec: function(env, args, request) { env.editor.undo(); }
-});
-canon.addCommand({
- name: "redo",
- bindKey: bindKey("Ctrl-Shift-Z|Ctrl-Y", "Command-Shift-Z|Command-Y"),
- exec: function(env, args, request) { env.editor.redo(); }
-});
-canon.addCommand({
- name: "overwrite",
- bindKey: bindKey("Insert", "Insert"),
- exec: function(env, args, request) { env.editor.toggleOverwrite(); }
-});
-canon.addCommand({
- name: "copylinesup",
- bindKey: bindKey("Ctrl-Alt-Up", "Command-Option-Up"),
- exec: function(env, args, request) { env.editor.copyLinesUp(); }
-});
-canon.addCommand({
- name: "movelinesup",
- bindKey: bindKey("Alt-Up", "Option-Up"),
- exec: function(env, args, request) { env.editor.moveLinesUp(); }
-});
-canon.addCommand({
- name: "selecttostart",
- bindKey: bindKey("Ctrl-Shift-Home|Alt-Shift-Up", "Command-Shift-Up"),
- exec: function(env, args, request) { env.editor.getSelection().selectFileStart(); }
-});
-canon.addCommand({
- name: "gotostart",
- bindKey: bindKey("Ctrl-Home|Ctrl-Up", "Command-Home|Command-Up"),
- exec: function(env, args, request) { env.editor.navigateFileStart(); }
-});
-canon.addCommand({
- name: "selectup",
- bindKey: bindKey("Shift-Up", "Shift-Up"),
- exec: function(env, args, request) { env.editor.getSelection().selectUp(); }
-});
-canon.addCommand({
- name: "golineup",
- bindKey: bindKey("Up", "Up|Ctrl-P"),
- exec: function(env, args, request) { env.editor.navigateUp(args.times); }
-});
-canon.addCommand({
- name: "copylinesdown",
- bindKey: bindKey("Ctrl-Alt-Down", "Command-Option-Down"),
- exec: function(env, args, request) { env.editor.copyLinesDown(); }
-});
-canon.addCommand({
- name: "movelinesdown",
- bindKey: bindKey("Alt-Down", "Option-Down"),
- exec: function(env, args, request) { env.editor.moveLinesDown(); }
-});
-canon.addCommand({
- name: "selecttoend",
- bindKey: bindKey("Ctrl-Shift-End|Alt-Shift-Down", "Command-Shift-Down"),
- exec: function(env, args, request) { env.editor.getSelection().selectFileEnd(); }
-});
-canon.addCommand({
- name: "gotoend",
- bindKey: bindKey("Ctrl-End|Ctrl-Down", "Command-End|Command-Down"),
- exec: function(env, args, request) { env.editor.navigateFileEnd(); }
-});
-canon.addCommand({
- name: "selectdown",
- bindKey: bindKey("Shift-Down", "Shift-Down"),
- exec: function(env, args, request) { env.editor.getSelection().selectDown(); }
-});
-canon.addCommand({
- name: "golinedown",
- bindKey: bindKey("Down", "Down|Ctrl-N"),
- exec: function(env, args, request) { env.editor.navigateDown(args.times); }
-});
-canon.addCommand({
- name: "selectwordleft",
- bindKey: bindKey("Ctrl-Shift-Left", "Option-Shift-Left"),
- exec: function(env, args, request) { env.editor.getSelection().selectWordLeft(); }
-});
-canon.addCommand({
- name: "gotowordleft",
- bindKey: bindKey("Ctrl-Left", "Option-Left"),
- exec: function(env, args, request) { env.editor.navigateWordLeft(); }
-});
-canon.addCommand({
- name: "selecttolinestart",
- bindKey: bindKey("Alt-Shift-Left", "Command-Shift-Left"),
- exec: function(env, args, request) { env.editor.getSelection().selectLineStart(); }
-});
-canon.addCommand({
- name: "gotolinestart",
- bindKey: bindKey("Alt-Left|Home", "Command-Left|Home|Ctrl-A"),
- exec: function(env, args, request) { env.editor.navigateLineStart(); }
-});
-canon.addCommand({
- name: "selectleft",
- bindKey: bindKey("Shift-Left", "Shift-Left"),
- exec: function(env, args, request) { env.editor.getSelection().selectLeft(); }
-});
-canon.addCommand({
- name: "gotoleft",
- bindKey: bindKey("Left", "Left|Ctrl-B"),
- exec: function(env, args, request) { env.editor.navigateLeft(args.times); }
-});
-canon.addCommand({
- name: "selectwordright",
- bindKey: bindKey("Ctrl-Shift-Right", "Option-Shift-Right"),
- exec: function(env, args, request) { env.editor.getSelection().selectWordRight(); }
-});
-canon.addCommand({
- name: "gotowordright",
- bindKey: bindKey("Ctrl-Right", "Option-Right"),
- exec: function(env, args, request) { env.editor.navigateWordRight(); }
-});
-canon.addCommand({
- name: "selecttolineend",
- bindKey: bindKey("Alt-Shift-Right", "Command-Shift-Right"),
- exec: function(env, args, request) { env.editor.getSelection().selectLineEnd(); }
-});
-canon.addCommand({
- name: "gotolineend",
- bindKey: bindKey("Alt-Right|End", "Command-Right|End|Ctrl-E"),
- exec: function(env, args, request) { env.editor.navigateLineEnd(); }
-});
-canon.addCommand({
- name: "selectright",
- bindKey: bindKey("Shift-Right", "Shift-Right"),
- exec: function(env, args, request) { env.editor.getSelection().selectRight(); }
-});
-canon.addCommand({
- name: "gotoright",
- bindKey: bindKey("Right", "Right|Ctrl-F"),
- exec: function(env, args, request) { env.editor.navigateRight(args.times); }
-});
-canon.addCommand({
- name: "selectpagedown",
- bindKey: bindKey("Shift-PageDown", "Shift-PageDown"),
- exec: function(env, args, request) { env.editor.selectPageDown(); }
-});
-canon.addCommand({
- name: "pagedown",
- bindKey: bindKey(null, "PageDown"),
- exec: function(env, args, request) { env.editor.scrollPageDown(); }
-});
-canon.addCommand({
- name: "gotopagedown",
- bindKey: bindKey("PageDown", "Option-PageDown|Ctrl-V"),
- exec: function(env, args, request) { env.editor.gotoPageDown(); }
-});
-canon.addCommand({
- name: "selectpageup",
- bindKey: bindKey("Shift-PageUp", "Shift-PageUp"),
- exec: function(env, args, request) { env.editor.selectPageUp(); }
-});
-canon.addCommand({
- name: "pageup",
- bindKey: bindKey(null, "PageUp"),
- exec: function(env, args, request) { env.editor.scrollPageUp(); }
-});
-canon.addCommand({
- name: "gotopageup",
- bindKey: bindKey("PageUp", "Option-PageUp"),
- exec: function(env, args, request) { env.editor.gotoPageUp(); }
-});
-canon.addCommand({
- name: "selectlinestart",
- bindKey: bindKey("Shift-Home", "Shift-Home"),
- exec: function(env, args, request) { env.editor.getSelection().selectLineStart(); }
-});
-canon.addCommand({
- name: "selectlineend",
- bindKey: bindKey("Shift-End", "Shift-End"),
- exec: function(env, args, request) { env.editor.getSelection().selectLineEnd(); }
-});
-canon.addCommand({
- name: "del",
- bindKey: bindKey("Delete", "Delete|Ctrl-D"),
- exec: function(env, args, request) { env.editor.removeRight(); }
-});
-canon.addCommand({
- name: "backspace",
- bindKey: bindKey(
- "Ctrl-Backspace|Command-Backspace|Option-Backspace|Shift-Backspace|Backspace",
- "Ctrl-Backspace|Command-Backspace|Shift-Backspace|Backspace|Ctrl-H"
- ),
- exec: function(env, args, request) { env.editor.removeLeft(); }
-});
-canon.addCommand({
- name: "removetolinestart",
- bindKey: bindKey(null, "Option-Backspace"),
- exec: function(env, args, request) { env.editor.removeToLineStart(); }
-});
-canon.addCommand({
- name: "removetolineend",
- bindKey: bindKey(null, "Ctrl-K"),
- exec: function(env, args, request) { env.editor.removeToLineEnd(); }
-});
-canon.addCommand({
- name: "removewordleft",
- bindKey: bindKey("Ctrl-Backspace", "Alt-Backspace|Ctrl-Alt-Backspace"),
- exec: function(env, args, request) { env.editor.removeWordLeft(); }
-});
-canon.addCommand({
- name: "removewordright",
- bindKey: bindKey(null, "Alt-Delete"),
- exec: function(env, args, request) { env.editor.removeWordRight(); }
-});
-canon.addCommand({
- name: "outdent",
- bindKey: bindKey("Shift-Tab", "Shift-Tab"),
- exec: function(env, args, request) { env.editor.blockOutdent(); }
-});
-canon.addCommand({
- name: "indent",
- bindKey: bindKey("Tab", "Tab"),
- exec: function(env, args, request) { env.editor.indent(); }
-});
-canon.addCommand({
- name: "inserttext",
- exec: function(env, args, request) {
- env.editor.insert(lang.stringRepeat(args.text || "", args.times || 1));
- }
-});
-canon.addCommand({
- name: "centerselection",
- bindKey: bindKey(null, "Ctrl-L"),
- exec: function(env, args, request) { env.editor.centerSelection(); }
-});
-canon.addCommand({
- name: "splitline",
- bindKey: bindKey(null, "Ctrl-O"),
- exec: function(env, args, request) { env.editor.splitLine(); }
-});
-canon.addCommand({
- name: "transposeletters",
- bindKey: bindKey("Ctrl-T", "Ctrl-T"),
- exec: function(env, args, request) { env.editor.transposeLetters(); }
-});
-
-});/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Mihai Sucan <mihai DOT sucan AT gmail DOT com>
- * Julian Viereck <julian DOT viereck AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/edit_session', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/lang', 'pilot/event_emitter', 'ace/selection', 'ace/mode/text', 'ace/range', 'ace/document', 'ace/background_tokenizer', 'ace/edit_session/folding'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var lang = require("pilot/lang");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-var Selection = require("ace/selection").Selection;
-var TextMode = require("ace/mode/text").Mode;
-var Range = require("ace/range").Range;
-var Document = require("ace/document").Document;
-var BackgroundTokenizer = require("ace/background_tokenizer").BackgroundTokenizer;
-
-var EditSession = function(text, mode) {
- this.$modified = true;
- this.$breakpoints = [];
- this.$frontMarkers = {};
- this.$backMarkers = {};
- this.$markerId = 1;
- this.$rowCache = [];
- this.$wrapData = [];
- this.$foldData = [];
- this.$foldData.toString = function() {
- var str = "";
- this.forEach(function(foldLine) {
- str += "\n" + foldLine.toString();
- });
- return str;
- }
-
- if (text instanceof Document) {
- this.setDocument(text);
- } else {
- this.setDocument(new Document(text));
- }
-
- this.selection = new Selection(this);
- if (mode)
- this.setMode(mode);
- else
- this.setMode(new TextMode());
-};
-
-
-(function() {
-
- oop.implement(this, EventEmitter);
-
- this.setDocument = function(doc) {
- if (this.doc)
- throw new Error("Document is already set");
-
- this.doc = doc;
- doc.on("change", this.onChange.bind(this));
- this.on("changeFold", this.onChangeFold.bind(this));
- };
-
- this.getDocument = function() {
- return this.doc;
- };
-
- this.$resetRowCache = function(row) {
- if (row == 0) {
- this.$rowCache = [];
- return;
- }
- var rowCache = this.$rowCache;
- for (var i = 0; i < rowCache.length; i++) {
- if (rowCache[i].docRow >= row) {
- rowCache.splice(i, rowCache.length);
- return;
- }
- }
- };
-
- this.onChangeFold = function(e) {
- var fold = e.data;
- this.$resetRowCache(fold.start.row);
- };
-
- this.onChange = function(e) {
- var delta = e.data;
- this.$modified = true;
-
- this.$resetRowCache(delta.range.start.row);
-
- var removedFolds = this.$updateInternalDataOnChange(e);
- if (!this.$fromUndo && this.$undoManager && !delta.ignore) {
- this.$deltasDoc.push(delta);
- if (removedFolds && removedFolds.length != 0) {
- this.$deltasFold.push({
- action: "removeFolds",
- folds: removedFolds
- });
- }
-
- this.$informUndoManager.schedule();
- }
-
- this.bgTokenizer.start(delta.range.start.row);
- this._dispatchEvent("change", e);
- };
-
- this.setValue = function(text) {
- this.doc.setValue(text);
- this.selection.moveCursorTo(0, 0);
- this.selection.clearSelection();
-
- this.$resetRowCache(0);
- this.$deltas = [];
- this.$deltasDoc = [];
- this.$deltasFold = [];
- this.getUndoManager().reset();
- };
-
- this.getValue =
- this.toString = function() {
- return this.doc.getValue();
- };
-
- this.getSelection = function() {
- return this.selection;
- };
-
- this.getState = function(row) {
- return this.bgTokenizer.getState(row);
- };
-
- this.getTokens = function(firstRow, lastRow) {
- return this.bgTokenizer.getTokens(firstRow, lastRow);
- };
-
- this.setUndoManager = function(undoManager) {
- this.$undoManager = undoManager;
- this.$resetRowCache(0);
- this.$deltas = [];
- this.$deltasDoc = [];
- this.$deltasFold = [];
-
- if (this.$informUndoManager)
- this.$informUndoManager.cancel();
-
- if (undoManager) {
- var self = this;
- this.$syncInformUndoManager = function() {
- self.$informUndoManager.cancel();
-
- if (self.$deltasFold.length) {
- self.$deltas.push({
- group: "fold",
- deltas: self.$deltasFold
- });
- self.$deltasFold = [];
- }
-
- if (self.$deltasDoc.length) {
- self.$deltas.push({
- group: "doc",
- deltas: self.$deltasDoc
- });
- self.$deltasDoc = [];
- }
-
- if (self.$deltas.length > 0) {
- undoManager.execute({
- action: "aceupdate",
- args: [self.$deltas, self]
- });
- }
-
- self.$deltas = [];
- }
- this.$informUndoManager =
- lang.deferredCall(this.$syncInformUndoManager);
- }
- };
-
- this.$defaultUndoManager = {
- undo: function() {},
- redo: function() {},
- reset: function() {}
- };
-
- this.getUndoManager = function() {
- return this.$undoManager || this.$defaultUndoManager;
- },
-
- this.getTabString = function() {
- if (this.getUseSoftTabs()) {
- return lang.stringRepeat(" ", this.getTabSize());
- } else {
- return "\t";
- }
- };
-
- this.$useSoftTabs = true;
- this.setUseSoftTabs = function(useSoftTabs) {
- if (this.$useSoftTabs === useSoftTabs) return;
-
- this.$useSoftTabs = useSoftTabs;
- };
-
- this.getUseSoftTabs = function() {
- return this.$useSoftTabs;
- };
-
- this.$tabSize = 4;
- this.setTabSize = function(tabSize) {
- if (isNaN(tabSize) || this.$tabSize === tabSize) return;
-
- this.$modified = true;
- this.$tabSize = tabSize;
- this._dispatchEvent("changeTabSize");
- };
-
- this.getTabSize = function() {
- return this.$tabSize;
- };
-
- this.isTabStop = function(position) {
- return this.$useSoftTabs && (position.column % this.$tabSize == 0);
- };
-
- this.$overwrite = false;
- this.setOverwrite = function(overwrite) {
- if (this.$overwrite == overwrite) return;
-
- this.$overwrite = overwrite;
- this._dispatchEvent("changeOverwrite");
- };
-
- this.getOverwrite = function() {
- return this.$overwrite;
- };
-
- this.toggleOverwrite = function() {
- this.setOverwrite(!this.$overwrite);
- };
-
- this.getBreakpoints = function() {
- return this.$breakpoints;
- };
-
- this.setBreakpoints = function(rows) {
- this.$breakpoints = [];
- for (var i=0; i<rows.length; i++) {
- this.$breakpoints[rows[i]] = true;
- }
- this._dispatchEvent("changeBreakpoint", {});
- };
-
- this.clearBreakpoints = function() {
- this.$breakpoints = [];
- this._dispatchEvent("changeBreakpoint", {});
- };
-
- this.setBreakpoint = function(row) {
- this.$breakpoints[row] = true;
- this._dispatchEvent("changeBreakpoint", {});
- };
-
- this.clearBreakpoint = function(row) {
- delete this.$breakpoints[row];
- this._dispatchEvent("changeBreakpoint", {});
- };
-
- this.getBreakpoints = function() {
- return this.$breakpoints;
- };
-
- this.addMarker = function(range, clazz, type, inFront) {
- var id = this.$markerId++;
-
- var marker = {
- range : range,
- type : type || "line",
- renderer: typeof type == "function" ? type : null,
- clazz : clazz,
- inFront: !!inFront
- }
-
- if (inFront) {
- this.$frontMarkers[id] = marker;
- this._dispatchEvent("changeFrontMarker")
- } else {
- this.$backMarkers[id] = marker;
- this._dispatchEvent("changeBackMarker")
- }
-
- return id;
- };
-
- this.removeMarker = function(markerId) {
- var marker = this.$frontMarkers[markerId] || this.$backMarkers[markerId];
- if (!marker)
- return;
-
- var markers = marker.inFront ? this.$frontMarkers : this.$backMarkers;
- if (marker) {
- delete (markers[markerId]);
- this._dispatchEvent(marker.inFront ? "changeFrontMarker" : "changeBackMarker");
- }
- };
-
- this.getMarkers = function(inFront) {
- return inFront ? this.$frontMarkers : this.$backMarkers;
- };
-
- /**
- * Error:
- * {
- * row: 12,
- * column: 2, //can be undefined
- * text: "Missing argument",
- * type: "error" // or "warning" or "info"
- * }
- */
- this.setAnnotations = function(annotations) {
- this.$annotations = {};
- for (var i=0; i<annotations.length; i++) {
- var annotation = annotations[i];
- var row = annotation.row;
- if (this.$annotations[row])
- this.$annotations[row].push(annotation);
- else
- this.$annotations[row] = [annotation];
- }
- this._dispatchEvent("changeAnnotation", {});
- };
-
- this.getAnnotations = function() {
- return this.$annotations;
- };
-
- this.clearAnnotations = function() {
- this.$annotations = {};
- this._dispatchEvent("changeAnnotation", {});
- };
-
- this.$detectNewLine = function(text) {
- var match = text.match(/^.*?(\r?\n)/m);
- if (match) {
- this.$autoNewLine = match[1];
- } else {
- this.$autoNewLine = "\n";
- }
- };
-
- this.getWordRange = function(row, column) {
- var line = this.getLine(row);
-
- var inToken = false;
- if (column > 0) {
- inToken = !!line.charAt(column - 1).match(this.tokenRe);
- }
-
- if (!inToken) {
- inToken = !!line.charAt(column).match(this.tokenRe);
- }
-
- var re = inToken ? this.tokenRe : this.nonTokenRe;
-
- var start = column;
- if (start > 0) {
- do {
- start--;
- }
- while (start >= 0 && line.charAt(start).match(re));
- start++;
- }
-
- var end = column;
- while (end < line.length && line.charAt(end).match(re)) {
- end++;
- }
-
- return new Range(row, start, row, end);
- };
-
- this.setNewLineMode = function(newLineMode) {
- this.doc.setNewLineMode(newLineMode);
- };
-
- this.getNewLineMode = function() {
- return this.doc.getNewLineMode();
- };
-
- this.$useWorker = true;
- this.setUseWorker = function(useWorker) {
- if (this.$useWorker == useWorker)
- return;
-
- this.$useWorker = useWorker;
-
- this.$stopWorker();
- if (useWorker)
- this.$startWorker();
- };
-
- this.getUseWorker = function() {
- return this.$useWorker;
- };
-
- this.onReloadTokenizer = function(e) {
- var rows = e.data;
- this.bgTokenizer.start(rows.first);
- this._dispatchEvent("tokenizerUpdate", e);
- };
-
- this.$mode = null;
- this.setMode = function(mode) {
- if (this.$mode === mode) return;
- this.$mode = mode;
-
- this.$stopWorker();
-
- if (this.$useWorker)
- this.$startWorker();
-
- var tokenizer = mode.getTokenizer();
-
- if(tokenizer.addEventListener !== undefined) {
- var onReloadTokenizer = this.onReloadTokenizer.bind(this);
- tokenizer.addEventListener("update", onReloadTokenizer);
- }
-
- if (!this.bgTokenizer) {
- this.bgTokenizer = new BackgroundTokenizer(tokenizer);
- var _self = this;
- this.bgTokenizer.addEventListener("update", function(e) {
- _self._dispatchEvent("tokenizerUpdate", e);
- });
- } else {
- this.bgTokenizer.setTokenizer(tokenizer);
- }
-
- this.bgTokenizer.setDocument(this.getDocument());
- this.bgTokenizer.start(0);
-
- this.tokenRe = mode.tokenRe;
- this.nonTokenRe = mode.nonTokenRe;
-
- this._dispatchEvent("changeMode");
- };
-
- this.$stopWorker = function() {
- if (this.$worker)
- this.$worker.terminate();
-
- this.$worker = null;
- };
-
- this.$startWorker = function() {
- if (typeof Worker !== "undefined" && !require.noWorker) {
- try {
- this.$worker = this.$mode.createWorker(this);
- } catch (e) {
- console.log("Could not load worker");
- console.log(e);
- this.$worker = null;
- }
- }
- else
- this.$worker = null;
- };
-
- this.getMode = function() {
- return this.$mode;
- };
-
- this.$scrollTop = 0;
- this.setScrollTopRow = function(scrollTopRow) {
- if (this.$scrollTop === scrollTopRow) return;
-
- this.$scrollTop = scrollTopRow;
- this._dispatchEvent("changeScrollTop");
- };
-
- this.getScrollTopRow = function() {
- return this.$scrollTop;
- };
-
- this.getWidth = function() {
- this.$computeWidth();
- return this.width;
- };
-
- this.getScreenWidth = function() {
- this.$computeWidth();
- return this.screenWidth;
- };
-
- this.$computeWidth = function(force) {
- if (this.$modified || force) {
- this.$modified = false;
-
- var lines = this.doc.getAllLines();
- var longestLine = 0;
- var longestScreenLine = 0;
-
- for ( var i = 0; i < lines.length; i++) {
- var foldLine = this.getFoldLine(i),
- line, len;
-
- line = lines[i];
- if (foldLine) {
- var end = foldLine.range.end;
- line = this.getFoldDisplayLine(foldLine);
- // Continue after the foldLine.end.row. All the lines in
- // between are folded.
- i = end.row;
- }
- len = line.length;
- longestLine = Math.max(longestLine, len);
- if (!this.$useWrapMode) {
- longestScreenLine = Math.max(
- longestScreenLine,
- this.$getStringScreenWidth(line)[0]
- );
- }
- }
- this.width = longestLine;
-
- if (this.$useWrapMode) {
- this.screenWidth = this.$wrapLimit;
- } else {
- this.screenWidth = longestScreenLine;
- }
- }
- };
-
- /**
- * Get a verbatim copy of the given line as it is in the document
- */
- this.getLine = function(row) {
- return this.doc.getLine(row);
- };
-
- this.getLines = function(firstRow, lastRow) {
- return this.doc.getLines(firstRow, lastRow);
- };
-
- this.getLength = function() {
- return this.doc.getLength();
- };
-
- this.getTextRange = function(range) {
- return this.doc.getTextRange(range);
- };
-
- this.findMatchingBracket = function(position) {
- if (position.column == 0) return null;
-
- var charBeforeCursor = this.getLine(position.row).charAt(position.column-1);
- if (charBeforeCursor == "") return null;
-
- var match = charBeforeCursor.match(/([\(\[\{])|([\)\]\}])/);
- if (!match) {
- return null;
- }
-
- if (match[1]) {
- return this.$findClosingBracket(match[1], position);
- } else {
- return this.$findOpeningBracket(match[2], position);
- }
- };
-
- this.$brackets = {
- ")": "(",
- "(": ")",
- "]": "[",
- "[": "]",
- "{": "}",
- "}": "{"
- };
-
- this.$findOpeningBracket = function(bracket, position) {
- var openBracket = this.$brackets[bracket];
-
- var column = position.column - 2;
- var row = position.row;
- var depth = 1;
-
- var line = this.getLine(row);
-
- while (true) {
- while(column >= 0) {
- var ch = line.charAt(column);
- if (ch == openBracket) {
- depth -= 1;
- if (depth == 0) {
- return {row: row, column: column};
- }
- }
- else if (ch == bracket) {
- depth +=1;
- }
- column -= 1;
- }
- row -=1;
- if (row < 0) break;
-
- var line = this.getLine(row);
- var column = line.length-1;
- }
- return null;
- };
-
- this.$findClosingBracket = function(bracket, position) {
- var closingBracket = this.$brackets[bracket];
-
- var column = position.column;
- var row = position.row;
- var depth = 1;
-
- var line = this.getLine(row);
- var lineCount = this.getLength();
-
- while (true) {
- while(column < line.length) {
- var ch = line.charAt(column);
- if (ch == closingBracket) {
- depth -= 1;
- if (depth == 0) {
- return {row: row, column: column};
- }
- }
- else if (ch == bracket) {
- depth +=1;
- }
- column += 1;
- }
- row +=1;
- if (row >= lineCount) break;
-
- var line = this.getLine(row);
- var column = 0;
- }
- return null;
- };
-
- this.insert = function(position, text) {
- return this.doc.insert(position, text);
- };
-
- this.remove = function(range) {
- return this.doc.remove(range);
- };
-
- this.undoChanges = function(deltas, dontSelect) {
- if (!deltas.length)
- return;
-
- this.$fromUndo = true;
- var lastUndoRange = null;
- for (var i = deltas.length - 1; i != -1; i--) {
- delta = deltas[i];
- if (delta.group == "doc") {
- this.doc.revertDeltas(delta.deltas);
- lastUndoRange =
- this.$getUndoSelection(delta.deltas, true, lastUndoRange);
- } else {
- delta.deltas.forEach(function(foldDelta) {
- this.addFolds(foldDelta.folds);
- }, this);
- }
- }
- this.$fromUndo = false;
- lastUndoRange &&
- !dontSelect &&
- this.selection.setSelectionRange(lastUndoRange);
- return lastUndoRange;
- },
-
- this.redoChanges = function(deltas, dontSelect) {
- if (!deltas.length)
- return;
-
- this.$fromUndo = true;
- var lastUndoRange = null;
- for (var i = 0; i < deltas.length; i++) {
- delta = deltas[i];
- if (delta.group == "doc") {
- this.doc.applyDeltas(delta.deltas);
- lastUndoRange =
- this.$getUndoSelection(delta.deltas, false, lastUndoRange);
- }
- }
- this.$fromUndo = false;
- lastUndoRange &&
- !dontSelect &&
- this.selection.setSelectionRange(lastUndoRange);
- return lastUndoRange;
- },
-
- this.$getUndoSelection = function(deltas, isUndo, lastUndoRange) {
- function isInsert(delta) {
- var insert =
- delta.action == "insertText" || delta.action == "insertLines";
- return isUndo ? !insert : insert;
- }
-
- var delta = deltas[0];
- var range, point;
- var lastDeltaIsInsert = false;
- if (isInsert(delta)) {
- range = delta.range.clone();
- lastDeltaIsInsert = true;
- } else {
- range = Range.fromPoints(delta.range.start, delta.range.start);
- lastDeltaIsInsert = false;
- }
-
- for (var i = 1; i < deltas.length; i++) {
- delta = deltas[i];
- if (isInsert(delta)) {
- point = delta.range.start;
- if (range.compare(point.row, point.column) == -1) {
- range.setStart(delta.range.start);
- }
- point = delta.range.end;
- if (range.compare(point.row, point.column) == 1) {
- range.setEnd(delta.range.end);
- }
- lastDeltaIsInsert = true;
- } else {
- point = delta.range.start;
- if (range.compare(point.row, point.column) == -1) {
- range =
- Range.fromPoints(delta.range.start, delta.range.start);
- }
- lastDeltaIsInsert = false;
- }
- }
-
- // Check if this range and the last undo range has something in common.
- // If true, merge the ranges.
- if (lastUndoRange != null) {
- var cmp = lastUndoRange.compareRange(range);
- if (cmp == 1) {
- range.setStart(lastUndoRange.start);
- } else if (cmp == -1) {
- range.setEnd(lastUndoRange.end);
- }
- }
-
- return range;
- },
-
- this.replace = function(range, text) {
- return this.doc.replace(range, text);
- };
-
- /**
- * Move a range of text from the given range to the given position.
- *
- * @param fromRange {Range} The range of text you want moved within the
- * document.
- * @param toPosition {Object} The location (row and column) where you want
- * to move the text to.
- * @return {Range} The new range where the text was moved to.
- */
- this.moveText = function(fromRange, toPosition) {
- var text = this.getTextRange(fromRange);
- this.remove(fromRange);
-
- var toRow = toPosition.row;
- var toColumn = toPosition.column;
-
- // Make sure to update the insert location, when text is removed in
- // front of the chosen point of insertion.
- if (!fromRange.isMultiLine() && fromRange.start.row == toRow &&
- fromRange.end.column < toColumn)
- toColumn -= text.length;
-
- if (fromRange.isMultiLine() && fromRange.end.row < toRow) {
- var lines = this.doc.$split(text);
- toRow -= lines.length - 1;
- }
-
- var endRow = toRow + fromRange.end.row - fromRange.start.row;
- var endColumn = fromRange.isMultiLine() ?
- fromRange.end.column :
- toColumn + fromRange.end.column - fromRange.start.column;
-
- var toRange = new Range(toRow, toColumn, endRow, endColumn);
-
- this.insert(toRange.start, text);
-
- return toRange;
- };
-
- this.indentRows = function(startRow, endRow, indentString) {
- indentString = indentString.replace(/\t/g, this.getTabString());
- for (var row=startRow; row<=endRow; row++) {
- this.insert({row: row, column:0}, indentString);
- }
- };
-
- this.outdentRows = function (range) {
- var rowRange = range.collapseRows();
- var deleteRange = new Range(0, 0, 0, 0);
- var size = this.getTabSize();
-
- for (var i = rowRange.start.row; i <= rowRange.end.row; ++i) {
- var line = this.getLine(i);
-
- deleteRange.start.row = i;
- deleteRange.end.row = i;
- for (var j = 0; j < size; ++j)
- if (line.charAt(j) != ' ')
- break;
- if (j < size && line.charAt(j) == '\t') {
- deleteRange.start.column = j;
- deleteRange.end.column = j + 1;
- } else {
- deleteRange.start.column = 0;
- deleteRange.end.column = j;
- }
- this.remove(deleteRange);
- }
- };
-
- this.moveLinesUp = function(firstRow, lastRow) {
- if (firstRow <= 0) return 0;
-
- var removed = this.doc.removeLines(firstRow, lastRow);
- this.doc.insertLines(firstRow - 1, removed);
- return -1;
- };
-
- this.moveLinesDown = function(firstRow, lastRow) {
- if (lastRow >= this.doc.getLength()-1) return 0;
-
- var removed = this.doc.removeLines(firstRow, lastRow);
- this.doc.insertLines(firstRow+1, removed);
- return 1;
- };
-
- this.duplicateLines = function(firstRow, lastRow) {
- var firstRow = this.$clipRowToDocument(firstRow);
- var lastRow = this.$clipRowToDocument(lastRow);
-
- var lines = this.getLines(firstRow, lastRow);
- this.doc.insertLines(firstRow, lines);
-
- var addedRows = lastRow - firstRow + 1;
- return addedRows;
- };
-
- this.$clipRowToDocument = function(row) {
- return Math.max(0, Math.min(row, this.doc.getLength()-1));
- };
-
- this.$clipPositionToDocument = function(row, column) {
- column = Math.max(0, column);
-
- if (row < 0) {
- row = 0;
- column = 0;
- } else {
- var len = this.doc.getLength();
- if (row >= len) {
- row = len - 1;
- column = this.doc.getLine(len-1).length;
- } else {
- column = Math.min(this.doc.getLine(row).length, column);
- }
- }
-
- return {
- row: row,
- column: column
- };
- };
-
- // WRAPMODE
- this.$wrapLimit = 80;
- this.$useWrapMode = false;
- this.$wrapLimitRange = {
- min : null,
- max : null
- };
-
- this.setUseWrapMode = function(useWrapMode) {
- if (useWrapMode != this.$useWrapMode) {
- this.$useWrapMode = useWrapMode;
- this.$modified = true;
- this.$resetRowCache(0);
-
- // If wrapMode is activaed, the wrapData array has to be initialized.
- if (useWrapMode) {
- var len = this.getLength();
- this.$wrapData = [];
- for (i = 0; i < len; i++) {
- this.$wrapData.push([]);
- }
- this.$updateWrapData(0, len - 1);
- }
-
- this._dispatchEvent("changeWrapMode");
- }
- };
-
- this.getUseWrapMode = function() {
- return this.$useWrapMode;
- };
-
- // Allow the wrap limit to move freely between min and max. Either
- // parameter can be null to allow the wrap limit to be unconstrained
- // in that direction. Or set both parameters to the same number to pin
- // the limit to that value.
- this.setWrapLimitRange = function(min, max) {
- if (this.$wrapLimitRange.min !== min || this.$wrapLimitRange.max !== max) {
- this.$wrapLimitRange.min = min;
- this.$wrapLimitRange.max = max;
- this.$modified = true;
- // This will force a recalculation of the wrap limit
- this._dispatchEvent("changeWrapMode");
- }
- };
-
- // This should generally only be called by the renderer when a resize
- // is detected.
- this.adjustWrapLimit = function(desiredLimit) {
- var wrapLimit = this.$constrainWrapLimit(desiredLimit);
- if (wrapLimit != this.$wrapLimit && wrapLimit > 0) {
- this.$wrapLimit = wrapLimit;
- this.$modified = true;
- if (this.$useWrapMode) {
- this.$updateWrapData(0, this.getLength() - 1);
- this.$resetRowCache(0)
- this._dispatchEvent("changeWrapLimit");
- }
- return true;
- }
- return false;
- };
-
- this.$constrainWrapLimit = function(wrapLimit) {
- var min = this.$wrapLimitRange.min;
- if (min)
- wrapLimit = Math.max(min, wrapLimit);
-
- var max = this.$wrapLimitRange.max;
- if (max)
- wrapLimit = Math.min(max, wrapLimit);
-
- // What would a limit of 0 even mean?
- return Math.max(1, wrapLimit);
- };
-
- this.getWrapLimit = function() {
- return this.$wrapLimit;
- };
-
- this.getWrapLimitRange = function() {
- // Avoid unexpected mutation by returning a copy
- return {
- min : this.$wrapLimitRange.min,
- max : this.$wrapLimitRange.max
- };
- };
-
- this.$updateInternalDataOnChange = function(e) {
- var useWrapMode = this.$useWrapMode;
- var len;
- var action = e.data.action;
- var firstRow = e.data.range.start.row,
- lastRow = e.data.range.end.row,
- start = e.data.range.start,
- end = e.data.range.end;
- var removedFolds = null;
-
- if (action.indexOf("Lines") != -1) {
- if (action == "insertLines") {
- lastRow = firstRow + (e.data.lines.length);
- } else {
- lastRow = firstRow;
- }
- len = e.data.lines.length;
- } else {
- len = lastRow - firstRow;
- }
-
- if (len != 0) {
- if (action.indexOf("remove") != -1) {
- useWrapMode && this.$wrapData.splice(firstRow, len);
-
- var foldLines = this.$foldData;
- removedFolds = this.getFoldsInRange(e.data.range);
- this.removeFolds(removedFolds);
-
- var foldLine = this.getFoldLine(end.row);
- var idx = 0;
- if (foldLine) {
- foldLine.addRemoveChars(end.row, end.column, start.column - end.column);
- foldLine.shiftRow(-len);
-
- var foldLineBefore = this.getFoldLine(firstRow);
- if (foldLineBefore && foldLineBefore !== foldLine) {
- foldLineBefore.merge(foldLine);
- foldLine = foldLineBefore;
- }
- idx = foldLines.indexOf(foldLine) + 1;
- }
-
- for (idx; idx < foldLines.length; idx++) {
- var foldLine = foldLines[idx];
- if (foldLine.start.row >= end.row) {
- foldLine.shiftRow(-len);
- }
- }
-
- lastRow = firstRow;
- } else {
- var args;
- if (useWrapMode) {
- args = [firstRow, 0];
- for (var i = 0; i < len; i++) args.push([]);
- this.$wrapData.splice.apply(this.$wrapData, args);
- }
-
- // If some new line is added inside of a foldLine, then split
- // the fold line up.
- var foldLines = this.$foldData;
- var foldLine = this.getFoldLine(firstRow);
- var idx = 0;
- if (foldLine) {
- var cmp = foldLine.range.compareInside(start.row, start.column)
- // Inside of the foldLine range. Need to split stuff up.
- if (cmp == 0) {
- foldLine = foldLine.split(start.row, start.column);
- foldLine.shiftRow(len);
- foldLine.addRemoveChars(
- lastRow, 0, end.column - start.column);
- } else
- // Infront of the foldLine but same row. Need to shift column.
- if (cmp == -1) {
- foldLine.addRemoveChars(firstRow, 0, end.column - start.column);
- foldLine.shiftRow(len);
- }
- // Nothing to do if the insert is after the foldLine.
- idx = foldLines.indexOf(foldLine) + 1;
- }
-
- for (idx; idx < foldLines.length; idx++) {
- var foldLine = foldLines[idx];
- if (foldLine.start.row >= firstRow) {
- foldLine.shiftRow(len);
- }
- }
- }
- } else {
- // Realign folds. E.g. if you add some new chars before a fold, the
- // fold should "move" to the right.
- var column;
- len = Math.abs(e.data.range.start.column - e.data.range.end.column);
- if (action.indexOf("remove") != -1) {
- // Get all the folds in the change range and remove them.
- removedFolds = this.getFoldsInRange(e.data.range);
- this.removeFolds(removedFolds);
-
- len = -len;
- }
- var foldLine = this.getFoldLine(firstRow);
- if (foldLine) {
- foldLine.addRemoveChars(firstRow, start.column, len);
- }
- }
-
- if (useWrapMode && this.$wrapData.length != this.doc.getLength()) {
- console.error("doc.getLength() and $wrapData.length have to be the same!");
- }
-
- useWrapMode && this.$updateWrapData(firstRow, lastRow);
-
- return removedFolds;
- };
-
- this.$updateWrapData = function(firstRow, lastRow) {
- var lines = this.doc.getAllLines();
- var tabSize = this.getTabSize();
- var wrapData = this.$wrapData;
- var wrapLimit = this.$wrapLimit;
- var tokens;
- var foldLine;
-
- var row = firstRow;
- lastRow = Math.min(lastRow, lines.length - 1);
- while (row <= lastRow) {
- foldLine = this.getFoldLine(row);
- if (!foldLine) {
- tokens = this.$getDisplayTokens(lang.stringTrimRight(lines[row]));
- } else {
- tokens = [];
- foldLine.walk(
- function(placeholder, row, column, lastColumn) {
- var walkTokens;
- if (placeholder) {
- walkTokens = this.$getDisplayTokens(
- placeholder, tokens.length);
- walkTokens[0] = PLACEHOLDER_START;
- for (var i = 1; i < walkTokens.length; i++) {
- walkTokens[i] = PLACEHOLDER_BODY;
- }
- } else {
- walkTokens = this.$getDisplayTokens(
- lines[row].substring(lastColumn, column),
- tokens.length);
- }
- tokens = tokens.concat(walkTokens);
- }.bind(this),
- foldLine.end.row,
- lines[foldLine.end.row].length + 1
- );
- // Remove spaces/tabs from the back of the token array.
- while (tokens.length != 0
- && tokens[tokens.length - 1] >= SPACE)
- {
- tokens.pop();
- }
- }
- wrapData[row] =
- this.$computeWrapSplits(tokens, wrapLimit, tabSize);
-
- row = this.getRowFoldEnd(row) + 1;
- }
- };
-
- // "Tokens"
- var CHAR = 1,
- CHAR_EXT = 2,
- PLACEHOLDER_START = 3,
- PLACEHOLDER_BODY = 4,
- SPACE = 10,
- TAB = 11,
- TAB_SPACE = 12;
-
- this.$computeWrapSplits = function(tokens, wrapLimit, tabSize) {
- if (tokens.length == 0) {
- return [];
- }
-
- var tabSize = this.getTabSize();
- var splits = [];
- var displayLength = tokens.length;
- var lastSplit = 0, lastDocSplit = 0;
-
- function addSplit(screenPos) {
- var displayed = tokens.slice(lastSplit, screenPos);
-
- // The document size is the current size - the extra width for tabs
- // and multipleWidth characters.
- var len = displayed.length;
- displayed.join("").
- // Get all the TAB_SPACEs.
- replace(/12/g, function(m) {
- len -= 1;
- }).
- // Get all the CHAR_EXT/multipleWidth characters.
- replace(/2/g, function(m) {
- len -= 1;
- });
-
- lastDocSplit += len;
- splits.push(lastDocSplit);
- lastSplit = screenPos;
- }
-
- while (displayLength - lastSplit > wrapLimit) {
- // This is, where the split should be.
- var split = lastSplit + wrapLimit;
-
- // If there is a space or tab at this split position, then making
- // a split is simple.
- if (tokens[split] >= SPACE) {
- // Include all following spaces + tabs in this split as well.
- while (tokens[split] >= SPACE) {
- split ++;
- }
- addSplit(split);
- continue;
- }
-
- // === ELSE ===
- // Check if split is inside of a placeholder. Placeholder are
- // not splitable. Therefore, seek the beginning of the placeholder
- // and try to place the split beofre the placeholder's start.
- if (tokens[split] == PLACEHOLDER_START
- || tokens[split] == PLACEHOLDER_BODY)
- {
- // Seek the start of the placeholder and do the split
- // before the placeholder. By definition there always
- // a PLACEHOLDER_START between split and lastSplit.
- for (split; split != lastSplit - 1; split--) {
- if (tokens[split] == PLACEHOLDER_START) {
- // split++; << No incremental here as we want to
- // have the position before the Placeholder.
- break;
- }
- }
-
- // If the PLACEHOLDER_START is not the index of the
- // last split, then we can do the split
- if (split > lastSplit) {
- addSplit(split);
- continue;
- }
-
- // If the PLACEHOLDER_START IS the index of the last
- // split, then we have to place the split after the
- // placeholder. So, let's seek for the end of the placeholder.
- split = lastSplit + wrapLimit;
- for (split; split < tokens.length; split++) {
- if (tokens[split] != PLACEHOLDER_BODY)
- {
- break;
- }
- }
-
- // If spilt == tokens.length, then the placeholder is the last
- // thing in the line and adding a new split doesn't make sense.
- if (split == tokens.length) {
- break; // Breaks the while-loop.
- }
-
- // Finally, add the split...
- addSplit(split);
- continue;
- }
-
- // === ELSE ===
- // Search for the first non space/tab/placeholder token backwards.
- for (split; split != lastSplit - 1; split--) {
- if (tokens[split] >= PLACEHOLDER_START) {
- split++;
- break;
- }
- }
- // If we found one, then add the split.
- if (split > lastSplit) {
- addSplit(split);
- continue;
- }
-
- // === ELSE ===
- split = lastSplit + wrapLimit;
- // The split is inside of a CHAR or CHAR_EXT token and no space
- // around -> force a split.
- addSplit(lastSplit + wrapLimit);
- }
- return splits;
- }
-
- /**
- * @param
- * offset: The offset in screenColumn at which position str starts.
- * Important for calculating the realTabSize.
- */
- this.$getDisplayTokens = function(str, offset) {
- var arr = [];
- var tabSize;
- offset = offset || 0;
-
- for (var i = 0; i < str.length; i++) {
- var c = str.charCodeAt(i);
- // Tab
- if (c == 9) {
- tabSize = this.getScreenTabSize(arr.length + offset);
- arr.push(TAB);
- for (var n = 1; n < tabSize; n++) {
- arr.push(TAB_SPACE);
- }
- }
- // Space
- else if(c == 32) {
- arr.push(SPACE);
- }
- // full width characters
- else if (isFullWidth(c)) {
- arr.push(CHAR, CHAR_EXT);
- } else {
- arr.push(CHAR);
- }
- }
- return arr;
- }
-
- /**
- * Calculates the width of the a string on the screen while assuming that
- * the string starts at the first column on the screen.
- *
- * @param string str String to calculate the screen width of
- * @return array
- * [0]: number of columns for str on screen.
- * [1]: docColumn position that was read until (useful with screenColumn)
- */
- this.$getStringScreenWidth = function(str, maxScreenColumn, screenColumn) {
- if (maxScreenColumn == 0) {
- return [0, 0];
- }
- if (maxScreenColumn == null) {
- maxScreenColumn = screenColumn +
- str.length * Math.max(this.getTabSize(), 2);
- }
- screenColumn = screenColumn || 0;
-
- var c, column;
- for (column = 0; column < str.length; column++) {
- c = str.charCodeAt(column);
- // tab
- if (c == 9) {
- screenColumn += this.getScreenTabSize(screenColumn);
- }
- // full width characters
- else if (isFullWidth(c)) {
- screenColumn += 2;
- } else {
- screenColumn += 1;
- }
- if (screenColumn > maxScreenColumn) {
- break
- }
- }
-
- return [screenColumn, column];
- }
-
- /**
- * Returns the number of rows required to render this row on the screen
- */
- this.getRowLength = function(row) {
- if (!this.$useWrapMode || !this.$wrapData[row]) {
- return 1;
- } else {
- return this.$wrapData[row].length + 1;
- }
- }
-
- /**
- * Returns the height in pixels required to render this row on the screen
- **/
- this.getRowHeight = function(config, row) {
- return this.getRowLength(row) * config.lineHeight;
- }
-
- this.getScreenLastRowColumn = function(screenRow) {
- //return this.screenToDocumentColumn(screenRow, Number.MAX_VALUE / 10)
- return this.documentToScreenColumn(screenRow, this.doc.getLine(screenRow).length);
- };
-
- this.getDocumentLastRowColumn = function(docRow, docColumn) {
- var screenRow = this.documentToScreenRow(docRow, docColumn);
- return this.getScreenLastRowColumn(screenRow);
- };
-
- this.getDocumentLastRowColumnPosition = function(docRow, docColumn) {
- var screenRow = this.documentToScreenRow(docRow, docColumn);
- return this.screenToDocumentPosition(screenRow, Number.MAX_VALUE / 10);
- };
-
- this.getRowSplitData = function(row) {
- if (!this.$useWrapMode) {
- return undefined;
- } else {
- return this.$wrapData[row];
- }
- };
-
- /**
- * Returns the width of a tab character at screenColumn.
- */
- this.getScreenTabSize = function(screenColumn) {
- return this.$tabSize - screenColumn % this.$tabSize;
- };
-
- this.screenToDocumentRow = function(screenRow, screenColumn) {
- return this.screenToDocumentPosition(screenRow, screenColumn).row;
- };
-
- this.screenToDocumentColumn = function(screenRow, screenColumn) {
- return this.screenToDocumentPosition(screenRow, screenColumn).column;
- };
-
- this.screenToDocumentPosition = function(screenRow, screenColumn) {
- if (screenRow < 0) {
- return {
- row: 0,
- column: 0
- }
- }
-
- var line;
- var docRow = 0;
- var docColumn = 0;
- var column;
- var foldLineRowLength;
- var row = 0;
- var rowLength = 0;
-
- var rowCache = this.$rowCache;
- for (var i = 0; i < rowCache.length; i++) {
- if (rowCache[i].screenRow < screenRow) {
- row = rowCache[i].screenRow;
- docRow = rowCache[i].docRow;
- }
- else {
- break;
- }
- }
- var doCache = !rowCache.length || i == rowCache.length;
-
- // clamp row before clamping column, for selection on last line
- var maxRow = this.getLength() - 1;
-
- var foldLine = this.getNextFold(docRow);
- var foldStart = foldLine ? foldLine.start.row : Infinity;
-
- while (row <= screenRow) {
- rowLength = this.getRowLength(docRow);
- if (row + rowLength - 1 >= screenRow || docRow >= maxRow) {
- break;
- } else {
- row += rowLength;
- docRow++;
- if (docRow > foldStart) {
- docRow = foldLine.end.row+1;
- foldLine = this.getNextFold(docRow);
- foldStart = foldLine ? foldLine.start.row : Infinity;
- }
- }
- if (doCache) {
- rowCache.push({
- docRow: docRow,
- screenRow: row
- });
- }
- }
-
- if (foldLine && foldLine.start.row <= docRow)
- line = this.getFoldDisplayLine(foldLine);
- else {
- line = this.getLine(docRow);
- foldLine = null;
- }
-
- var splits = [];
- if (this.$useWrapMode) {
- splits = this.$wrapData[docRow];
- if (splits) {
- column = splits[screenRow - row]
- if(screenRow > row && splits.length) {
- docColumn = splits[screenRow - row - 1] || splits[splits.length - 1];
- line = line.substring(docColumn);
- }
- }
- }
-
- docColumn += this.$getStringScreenWidth(line, screenColumn)[1];
-
- // clip row at the end of the document
- if (row + splits.length < screenRow)
- docColumn = Number.MAX_VALUE;
-
- // Need to do some clamping action here.
- if (this.$useWrapMode) {
- if (docColumn >= column) {
- // We remove one character at the end such that the docColumn
- // position returned is not associated to the next row on the
- // screen.
- docColumn = column - 1;
- }
- } else {
- docColumn = Math.min(docColumn, line.length);
- }
-
- if (foldLine) {
- return foldLine.idxToPosition(docColumn);
- }
-
- return {
- row: docRow,
- column: docColumn
- }
- };
-
- this.documentToScreenPosition = function(docRow, docColumn) {
- // Normalize the passed in arguments.
- if (typeof docColumn === "undefined")
- var pos = this.$clipPositionToDocument(docRow.row, docRow.column);
- else
- pos = this.$clipPositionToDocument(docRow, docColumn);
-
- docRow = pos.row;
- docColumn = pos.column;
-
- var LL = this.$rowCache.length;
-
- var wrapData;
- // Special case in wrapMode if the doc is at the end of the document.
- if (this.$useWrapMode) {
- wrapData = this.$wrapData;
- if (docRow > wrapData.length - 1) {
- return {
- row: this.getScreenLength(),
- column: wrapData.length == 0
- ? 0
- : (wrapData[wrapData.length - 1].length - 1)
- };
- }
- }
-
- var screenRow = 0;
- var screenColumn = 0;
- var foldStartRow = null;
- var fold = null;
-
- // Clamp the docRow position in case it's inside of a folded block.
- fold = this.getFoldAt(docRow, docColumn, 1);
- if (fold) {
- docRow = fold.start.row;
- docColumn = fold.start.column;
- }
-
- var rowEnd, row = 0;
- var rowCache = this.$rowCache;
-
- for (var i = 0; i < rowCache.length; i++) {
- if (rowCache[i].docRow < docRow) {
- screenRow = rowCache[i].screenRow;
- row = rowCache[i].docRow;
- } else {
- break;
- }
- }
- var doCache = !rowCache.length || i == rowCache.length;
-
- var foldLine = this.getNextFold(row);
- var foldStart = foldLine ?foldLine.start.row :Infinity;
-
- while (row < docRow) {
- if (row >= foldStart) {
- rowEnd = foldLine.end.row + 1;
- if (rowEnd > docRow)
- break;
- foldLine = this.getNextFold(rowEnd);
- foldStart = foldLine ?foldLine.start.row :Infinity;
- }
- else {
- rowEnd = row + 1;
- }
-
- screenRow += this.getRowLength(row);
- row = rowEnd;
-
- if (doCache) {
- rowCache.push({
- docRow: row,
- screenRow: screenRow
- });
- }
- }
-
- // Calculate the text line that is displayed in docRow on the screen.
- var textLine = "";
- // Check if the final row we want to reach is inside of a fold.
- if (foldLine && row >= foldStart) {
- textLine = this.getFoldDisplayLine(foldLine, docRow, docColumn);
- foldStartRow = foldLine.start.row;
- } else {
- textLine = this.getLine(docRow).substring(0, docColumn);
- foldStartRow = docRow;
- }
- // Clamp textLine if in wrapMode.
- if (this.$useWrapMode) {
- var wrapRow = wrapData[foldStartRow];
- var screenRowOffset = 0;
- while (textLine.length >= wrapRow[screenRowOffset]) {
- screenRow ++;
- screenRowOffset++;
- }
- textLine = textLine.substring(
- wrapRow[screenRowOffset - 1] || 0, textLine.length
- );
- }
-
- return {
- row: screenRow,
- column: this.$getStringScreenWidth(textLine)[0]
- };
- };
-
- this.documentToScreenColumn = function(row, docColumn) {
- return this.documentToScreenPosition(row, docColumn).column;
- };
-
- this.documentToScreenRow = function(docRow, docColumn) {
- return this.documentToScreenPosition(docRow, docColumn).row;
- };
-
- this.getScreenLength = function() {
- var screenRows = 0;
- var lastFoldLine = null;
- var foldLine = null;
- if (!this.$useWrapMode) {
- screenRows = this.getLength();
-
- // Remove the folded lines again.
- var foldData = this.$foldData;
- for (var i = 0; i < foldData.length; i++) {
- foldLine = foldData[i];
- screenRows -= foldLine.end.row - foldLine.start.row;
- }
- } else {
- for (var row = 0; row < this.$wrapData.length; row++) {
- if (foldLine = this.getFoldLine(row, lastFoldLine)) {
- row = foldLine.end.row;
- screenRows += 1;
- } else {
- screenRows += this.$wrapData[row].length + 1;
- }
- }
- }
-
- return screenRows;
- }
-
- // For every keystroke this gets called once per char in the whole doc!!
- // Wouldn't hurt to make it a bit faster for c >= 0x1100
- function isFullWidth(c) {
- if (c < 0x1100)
- return false;
- return c >= 0x1100 && c <= 0x115F ||
- c >= 0x11A3 && c <= 0x11A7 ||
- c >= 0x11FA && c <= 0x11FF ||
- c >= 0x2329 && c <= 0x232A ||
- c >= 0x2E80 && c <= 0x2E99 ||
- c >= 0x2E9B && c <= 0x2EF3 ||
- c >= 0x2F00 && c <= 0x2FD5 ||
- c >= 0x2FF0 && c <= 0x2FFB ||
- c >= 0x3000 && c <= 0x303E ||
- c >= 0x3041 && c <= 0x3096 ||
- c >= 0x3099 && c <= 0x30FF ||
- c >= 0x3105 && c <= 0x312D ||
- c >= 0x3131 && c <= 0x318E ||
- c >= 0x3190 && c <= 0x31BA ||
- c >= 0x31C0 && c <= 0x31E3 ||
- c >= 0x31F0 && c <= 0x321E ||
- c >= 0x3220 && c <= 0x3247 ||
- c >= 0x3250 && c <= 0x32FE ||
- c >= 0x3300 && c <= 0x4DBF ||
- c >= 0x4E00 && c <= 0xA48C ||
- c >= 0xA490 && c <= 0xA4C6 ||
- c >= 0xA960 && c <= 0xA97C ||
- c >= 0xAC00 && c <= 0xD7A3 ||
- c >= 0xD7B0 && c <= 0xD7C6 ||
- c >= 0xD7CB && c <= 0xD7FB ||
- c >= 0xF900 && c <= 0xFAFF ||
- c >= 0xFE10 && c <= 0xFE19 ||
- c >= 0xFE30 && c <= 0xFE52 ||
- c >= 0xFE54 && c <= 0xFE66 ||
- c >= 0xFE68 && c <= 0xFE6B ||
- c >= 0xFF01 && c <= 0xFF60 ||
- c >= 0xFFE0 && c <= 0xFFE6;
- };
-
-}).call(EditSession.prototype);
-
-require("ace/edit_session/folding").Folding.call(EditSession.prototype);
-
-exports.EditSession = EditSession;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Julian Viereck <julian.viereck@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/selection', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/lang', 'pilot/event_emitter', 'ace/range'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var lang = require("pilot/lang");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-var Range = require("ace/range").Range;
-
-/**
- * Keeps cursor position and the text selection of an edit session.
- *
- * The row/columns used in the selection are in document coordinates
- * representing ths coordinates as thez appear in the document
- * before applying soft wrap and folding.
- */
-var Selection = function(session) {
- this.session = session;
- this.doc = session.getDocument();
-
- this.clearSelection();
- this.selectionLead = this.doc.createAnchor(0, 0);
- this.selectionAnchor = this.doc.createAnchor(0, 0);
-
- var _self = this;
- this.selectionLead.on("change", function(e) {
- _self._dispatchEvent("changeCursor");
- if (!_self.$isEmpty)
- _self._dispatchEvent("changeSelection");
- if (!_self.$preventUpdateDesiredColumnOnChange && e.old.column != e.value.column)
- _self.$updateDesiredColumn();
- });
-
- this.selectionAnchor.on("change", function() {
- if (!_self.$isEmpty)
- _self._dispatchEvent("changeSelection");
- });
-};
-
-(function() {
-
- oop.implement(this, EventEmitter);
-
- this.isEmpty = function() {
- return (this.$isEmpty || (
- this.selectionAnchor.row == this.selectionLead.row &&
- this.selectionAnchor.column == this.selectionLead.column
- ));
- };
-
- this.isMultiLine = function() {
- if (this.isEmpty()) {
- return false;
- }
-
- return this.getRange().isMultiLine();
- };
-
- this.getCursor = function() {
- return this.selectionLead.getPosition();
- };
-
- this.setSelectionAnchor = function(row, column) {
- this.selectionAnchor.setPosition(row, column);
-
- if (this.$isEmpty) {
- this.$isEmpty = false;
- this._dispatchEvent("changeSelection");
- }
- };
-
- this.getSelectionAnchor = function() {
- if (this.$isEmpty)
- return this.getSelectionLead()
- else
- return this.selectionAnchor.getPosition();
- };
-
- this.getSelectionLead = function() {
- return this.selectionLead.getPosition();
- };
-
- this.shiftSelection = function(columns) {
- if (this.$isEmpty) {
- this.moveCursorTo(this.selectionLead.row, this.selectionLead.column + columns);
- return;
- };
-
- var anchor = this.getSelectionAnchor();
- var lead = this.getSelectionLead();
-
- var isBackwards = this.isBackwards();
-
- if (!isBackwards || anchor.column !== 0)
- this.setSelectionAnchor(anchor.row, anchor.column + columns);
-
- if (isBackwards || lead.column !== 0) {
- this.$moveSelection(function() {
- this.moveCursorTo(lead.row, lead.column + columns);
- });
- }
- };
-
- this.isBackwards = function() {
- var anchor = this.selectionAnchor;
- var lead = this.selectionLead;
- return (anchor.row > lead.row || (anchor.row == lead.row && anchor.column > lead.column));
- };
-
- this.getRange = function() {
- var anchor = this.selectionAnchor;
- var lead = this.selectionLead;
-
- if (this.isEmpty())
- return Range.fromPoints(lead, lead);
-
- if (this.isBackwards()) {
- return Range.fromPoints(lead, anchor);
- }
- else {
- return Range.fromPoints(anchor, lead);
- }
- };
-
- this.clearSelection = function() {
- if (!this.$isEmpty) {
- this.$isEmpty = true;
- this._dispatchEvent("changeSelection");
- }
- };
-
- this.selectAll = function() {
- var lastRow = this.doc.getLength() - 1;
- this.setSelectionAnchor(lastRow, this.doc.getLine(lastRow).length);
- this.moveCursorTo(0, 0);
- };
-
- this.setSelectionRange = function(range, reverse) {
- if (reverse) {
- this.setSelectionAnchor(range.end.row, range.end.column);
- this.selectTo(range.start.row, range.start.column);
- } else {
- this.setSelectionAnchor(range.start.row, range.start.column);
- this.selectTo(range.end.row, range.end.column);
- }
- this.$updateDesiredColumn();
- };
-
- this.$updateDesiredColumn = function() {
- var cursor = this.getCursor();
- this.$desiredColumn = this.session.documentToScreenColumn(cursor.row, cursor.column);
- };
-
- this.$moveSelection = function(mover) {
- var lead = this.selectionLead;
- if (this.$isEmpty)
- this.setSelectionAnchor(lead.row, lead.column);
-
- mover.call(this);
- };
-
- this.selectTo = function(row, column) {
- this.$moveSelection(function() {
- this.moveCursorTo(row, column);
- });
- };
-
- this.selectToPosition = function(pos) {
- this.$moveSelection(function() {
- this.moveCursorToPosition(pos);
- });
- };
-
- this.selectUp = function() {
- this.$moveSelection(this.moveCursorUp);
- };
-
- this.selectDown = function() {
- this.$moveSelection(this.moveCursorDown);
- };
-
- this.selectRight = function() {
- this.$moveSelection(this.moveCursorRight);
- };
-
- this.selectLeft = function() {
- this.$moveSelection(this.moveCursorLeft);
- };
-
- this.selectLineStart = function() {
- this.$moveSelection(this.moveCursorLineStart);
- };
-
- this.selectLineEnd = function() {
- this.$moveSelection(this.moveCursorLineEnd);
- };
-
- this.selectFileEnd = function() {
- this.$moveSelection(this.moveCursorFileEnd);
- };
-
- this.selectFileStart = function() {
- this.$moveSelection(this.moveCursorFileStart);
- };
-
- this.selectWordRight = function() {
- this.$moveSelection(this.moveCursorWordRight);
- };
-
- this.selectWordLeft = function() {
- this.$moveSelection(this.moveCursorWordLeft);
- };
-
- this.selectWord = function() {
- var cursor = this.getCursor();
- var range = this.session.getWordRange(cursor.row, cursor.column);
- this.setSelectionRange(range);
- };
-
- this.selectLine = function() {
- var rowStart = this.selectionLead.row;
- var rowEnd;
-
- var foldLine = this.session.getFoldLine(rowStart);
- if (foldLine) {
- rowStart = foldLine.start.row;
- rowEnd = foldLine.end.row;
- } else {
- rowEnd = rowStart;
- }
- this.setSelectionAnchor(rowStart, 0);
- this.$moveSelection(function() {
- this.moveCursorTo(rowEnd + 1, 0);
- });
- };
-
- this.moveCursorUp = function() {
- this.moveCursorBy(-1, 0);
- };
-
- this.moveCursorDown = function() {
- this.moveCursorBy(1, 0);
- };
-
- this.moveCursorLeft = function() {
- var cursor = this.selectionLead.getPosition(),
- fold;
-
- if (fold = this.session.getFoldAt(cursor.row, cursor.column, -1)) {
- this.moveCursorTo(fold.start.row, fold.start.column);
- } else if (cursor.column == 0) {
- // cursor is a line (start
- if (cursor.row > 0) {
- this.moveCursorTo(cursor.row - 1, this.doc.getLine(cursor.row - 1).length);
- }
- }
- else {
- var tabSize = this.session.getTabSize();
- if (this.session.isTabStop(cursor) && this.doc.getLine(cursor.row).slice(cursor.column-tabSize, cursor.column).split(" ").length-1 == tabSize)
- this.moveCursorBy(0, -tabSize);
- else
- this.moveCursorBy(0, -1);
- }
- };
-
- this.moveCursorRight = function() {
- var cursor = this.selectionLead.getPosition(),
- fold;
- if (fold = this.session.getFoldAt(cursor.row, cursor.column, 1)) {
- this.moveCursorTo(fold.end.row, fold.end.column);
- }
- else if (this.selectionLead.column == this.doc.getLine(this.selectionLead.row).length) {
- if (this.selectionLead.row < this.doc.getLength() - 1) {
- this.moveCursorTo(this.selectionLead.row + 1, 0);
- }
- }
- else {
- var tabSize = this.session.getTabSize();
- var cursor = this.selectionLead;
- if (this.session.isTabStop(cursor) && this.doc.getLine(cursor.row).slice(cursor.column, cursor.column+tabSize).split(" ").length-1 == tabSize)
- this.moveCursorBy(0, tabSize);
- else
- this.moveCursorBy(0, 1);
- }
- };
-
- this.moveCursorLineStart = function() {
- var row = this.selectionLead.row;
- var column = this.selectionLead.column;
- var screenRow = this.session.documentToScreenRow(row, column);
-
- // Determ the doc-position of the first character at the screen line.
- var firstColumnPosition = this.session.screenToDocumentPosition(screenRow, 0);
-
- // Determ the line
- var beforeCursor = this.session.getDisplayLine(
- row, null,
- firstColumnPosition.row, firstColumnPosition.column
- );
-
- var leadingSpace = beforeCursor.match(/^\s*/);
- if (leadingSpace[0].length == column) {
- this.moveCursorTo(
- firstColumnPosition.row, firstColumnPosition.column
- );
- }
- else {
- this.moveCursorTo(
- firstColumnPosition.row,
- firstColumnPosition.column + leadingSpace[0].length
- );
- }
- };
-
- this.moveCursorLineEnd = function() {
- var lead = this.selectionLead;
- var lastRowColumnPosition =
- this.session.getDocumentLastRowColumnPosition(lead.row, lead.column);
- this.moveCursorTo(
- lastRowColumnPosition.row,
- lastRowColumnPosition.column
- );
- };
-
- this.moveCursorFileEnd = function() {
- var row = this.doc.getLength() - 1;
- var column = this.doc.getLine(row).length;
- this.moveCursorTo(row, column);
- };
-
- this.moveCursorFileStart = function() {
- this.moveCursorTo(0, 0);
- };
-
- this.moveCursorWordRight = function() {
- var row = this.selectionLead.row;
- var column = this.selectionLead.column;
- var line = this.doc.getLine(row);
- var rightOfCursor = line.substring(column);
-
- var match;
- this.session.nonTokenRe.lastIndex = 0;
- this.session.tokenRe.lastIndex = 0;
-
- var fold;
- if (fold = this.session.getFoldAt(row, column, 1)) {
- this.moveCursorTo(fold.end.row, fold.end.column);
- return;
- } else if (column == line.length) {
- this.moveCursorRight();
- return;
- }
- else if (match = this.session.nonTokenRe.exec(rightOfCursor)) {
- column += this.session.nonTokenRe.lastIndex;
- this.session.nonTokenRe.lastIndex = 0;
- }
- else if (match = this.session.tokenRe.exec(rightOfCursor)) {
- column += this.session.tokenRe.lastIndex;
- this.session.tokenRe.lastIndex = 0;
- }
-
- this.moveCursorTo(row, column);
- };
-
- this.moveCursorWordLeft = function() {
- var row = this.selectionLead.row;
- var column = this.selectionLead.column;
-
- var fold;
- if (fold = this.session.getFoldAt(row, column, -1)) {
- this.moveCursorTo(fold.start.row, fold.start.column);
- return;
- }
-
- if (column == 0) {
- this.moveCursorLeft();
- return;
- }
-
- var str = this.session.getFoldStringAt(row, column, -1);
- if (str == null) {
- str = this.doc.getLine(row).substring(0, column)
- }
- var leftOfCursor = lang.stringReverse(str);
-
- var match;
- this.session.nonTokenRe.lastIndex = 0;
- this.session.tokenRe.lastIndex = 0;
-
- if (match = this.session.nonTokenRe.exec(leftOfCursor)) {
- column -= this.session.nonTokenRe.lastIndex;
- this.session.nonTokenRe.lastIndex = 0;
- }
- else if (match = this.session.tokenRe.exec(leftOfCursor)) {
- column -= this.session.tokenRe.lastIndex;
- this.session.tokenRe.lastIndex = 0;
- }
-
- this.moveCursorTo(row, column);
- };
-
- this.moveCursorBy = function(rows, chars) {
- var screenPos = this.session.documentToScreenPosition(
- this.selectionLead.row,
- this.selectionLead.column
- );
- var screenCol = (chars == 0 && this.$desiredColumn) || screenPos.column;
- var docPos = this.session.screenToDocumentPosition(screenPos.row + rows, screenCol);
- this.moveCursorTo(docPos.row, docPos.column + chars, chars == 0);
- };
-
- this.moveCursorToPosition = function(position) {
- this.moveCursorTo(position.row, position.column);
- };
-
- this.moveCursorTo = function(row, column, preventUpdateDesiredColumn) {
- // Ensure the row/column is not inside of a fold.
- var fold = this.session.getFoldAt(row, column, 1);
- if (fold) {
- row = fold.start.row;
- column = fold.start.column;
- }
-
- this.$preventUpdateDesiredColumnOnChange = true;
- this.selectionLead.setPosition(row, column);
- this.$preventUpdateDesiredColumnOnChange = false;
-
- if (!preventUpdateDesiredColumn)
- this.$updateDesiredColumn(this.selectionLead.column);
- };
-
- this.moveCursorToScreen = function(row, column, preventUpdateDesiredColumn) {
- var pos = this.session.screenToDocumentPosition(row, column);
- row = pos.row;
- column = pos.column;
- this.moveCursorTo(row, column, preventUpdateDesiredColumn);
- };
-
-}).call(Selection.prototype);
-
-exports.Selection = Selection;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/range', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var Range = function(startRow, startColumn, endRow, endColumn) {
- this.start = {
- row: startRow,
- column: startColumn
- };
-
- this.end = {
- row: endRow,
- column: endColumn
- };
-};
-
-(function() {
-
- this.toString = function() {
- return ("Range: [" + this.start.row + "/" + this.start.column +
- "] -> [" + this.end.row + "/" + this.end.column + "]");
- };
-
- this.contains = function(row, column) {
- return this.compare(row, column) == 0;
- };
-
- /**
- * Compares this range (A) with another range (B), where B is the passed in
- * range.
- *
- * Return values:
- * -2: (B) is infront of (A) and doesn't intersect with (A)
- * -1: (B) begins before (A) but ends inside of (A)
- * 0: (B) is completly inside of (A) OR (A) is complety inside of (B)
- * +1: (B) begins inside of (A) but ends outside of (A)
- * +2: (B) is after (A) and doesn't intersect with (A)
- *
- * 42: FTW state: (B) ends in (A) but starts outside of (A)
- */
- this.compareRange = function(range) {
- var cmp,
- end = range.end,
- start = range.start;
-
- cmp = this.compare(end.row, end.column);
- if (cmp == 1) {
- cmp = this.compare(start.row, start.column);
- if (cmp == 1) {
- return 2;
- } else if (cmp == 0) {
- return 1;
- } else {
- return 0;
- }
- } else if (cmp == -1) {
- return -2;
- } else {
- cmp = this.compare(start.row, start.column);
- if (cmp == -1) {
- return -1;
- } else if (cmp == 1) {
- return 42;
- } else {
- return 0;
- }
- }
- }
-
- this.containsRange = function(range) {
- var cmp = this.compareRange(range);
- return (cmp == -1 || cmp == 0 || cmp == 1);
- }
-
- this.isEnd = function(row, column) {
- return this.end.row == row && this.end.column == column;
- }
-
- this.isStart = function(row, column) {
- return this.start.row == row && this.start.column == column;
- }
-
- this.setStart = function(row, column) {
- if (typeof row == "object") {
- this.start.column = row.column;
- this.start.row = row.row;
- } else {
- this.start.row = row;
- this.start.column = column;
- }
- }
-
- this.setEnd = function(row, column) {
- if (typeof row == "object") {
- this.end.column = row.column;
- this.end.row = row.row;
- } else {
- this.end.row = row;
- this.end.column = column;
- }
- }
-
- this.inside = function(row, column) {
- if (this.compare(row, column) == 0) {
- if (this.isEnd(row, column) || this.isStart(row, column)) {
- return false;
- } else {
- return true;
- }
- }
- return false;
- }
-
- this.insideStart = function(row, column) {
- if (this.compare(row, column) == 0) {
- if (this.isEnd(row, column)) {
- return false;
- } else {
- return true;
- }
- }
- return false;
- }
-
- this.insideEnd = function(row, column) {
- if (this.compare(row, column) == 0) {
- if (this.isStart(row, column)) {
- return false;
- } else {
- return true;
- }
- }
- return false;
- }
-
- this.compare = function(row, column) {
- if (!this.isMultiLine()) {
- if (row === this.start.row) {
- return column < this.start.column ? -1 : (column > this.end.column ? 1 : 0);
- };
- }
-
- if (row < this.start.row)
- return -1;
-
- if (row > this.end.row)
- return 1;
-
- if (this.start.row === row)
- return column >= this.start.column ? 0 : -1;
-
- if (this.end.row === row)
- return column <= this.end.column ? 0 : 1;
-
- return 0;
- };
-
- /**
- * Like .compare(), but if isStart is true, return -1;
- */
- this.compareStart = function(row, column) {
- if (this.start.row == row && this.start.column == column) {
- return -1;
- } else {
- return this.compare(row, column);
- }
- }
-
- /**
- * Like .compare(), but if isEnd is true, return 1;
- */
- this.compareEnd = function(row, column) {
- if (this.end.row == row && this.end.column == column) {
- return 1;
- } else {
- return this.compare(row, column);
- }
- }
-
- this.compareInside = function(row, column) {
- if (this.end.row == row && this.end.column == column) {
- return 1;
- } else if (this.start.row == row && this.start.column == column) {
- return -1;
- } else {
- return this.compare(row, column);
- }
- }
-
- this.clipRows = function(firstRow, lastRow) {
- if (this.end.row > lastRow) {
- var end = {
- row: lastRow+1,
- column: 0
- };
- }
-
- if (this.start.row > lastRow) {
- var start = {
- row: lastRow+1,
- column: 0
- };
- }
-
- if (this.start.row < firstRow) {
- var start = {
- row: firstRow,
- column: 0
- };
- }
-
- if (this.end.row < firstRow) {
- var end = {
- row: firstRow,
- column: 0
- };
- }
- return Range.fromPoints(start || this.start, end || this.end);
- };
-
- this.extend = function(row, column) {
- var cmp = this.compare(row, column);
-
- if (cmp == 0)
- return this;
- else if (cmp == -1)
- var start = {row: row, column: column};
- else
- var end = {row: row, column: column};
-
- return Range.fromPoints(start || this.start, end || this.end);
- };
-
- this.isEmpty = function() {
- return (this.start.row == this.end.row && this.start.column == this.end.column);
- };
-
- this.isMultiLine = function() {
- return (this.start.row !== this.end.row);
- };
-
- this.clone = function() {
- return Range.fromPoints(this.start, this.end);
- };
-
- this.collapseRows = function() {
- if (this.end.column == 0)
- return new Range(this.start.row, 0, Math.max(this.start.row, this.end.row-1), 0)
- else
- return new Range(this.start.row, 0, this.end.row, 0)
- };
-
- this.toScreenRange = function(session) {
- var screenPosStart =
- session.documentToScreenPosition(this.start);
- var screenPosEnd =
- session.documentToScreenPosition(this.end);
-
- return new Range(
- screenPosStart.row, screenPosStart.column,
- screenPosEnd.row, screenPosEnd.column
- );
- };
-
-}).call(Range.prototype);
-
-
-Range.fromPoints = function(start, end) {
- return new Range(start.row, start.column, end.row, end.column);
-};
-
-exports.Range = Range;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Mihai Sucan <mihai DOT sucan AT gmail DOT com>
- * Chris Spencer <chris.ag.spencer AT googlemail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/mode/text', ['require', 'exports', 'module' , 'ace/tokenizer', 'ace/mode/text_highlight_rules', 'ace/mode/behaviour', 'ace/unicode'], function(require, exports, module) {
-
-var Tokenizer = require("ace/tokenizer").Tokenizer;
-var TextHighlightRules = require("ace/mode/text_highlight_rules").TextHighlightRules;
-var Behaviour = require("ace/mode/behaviour").Behaviour;
-var unicode = require("ace/unicode");
-
-var Mode = function() {
- this.$tokenizer = new Tokenizer(new TextHighlightRules().getRules());
- this.$behaviour = new Behaviour();
-};
-
-(function() {
-
- this.tokenRe = new RegExp("^["
- + unicode.packages.L
- + unicode.packages.Mn + unicode.packages.Mc
- + unicode.packages.Nd
- + unicode.packages.Pc + "\\$_]+", "g"
- );
-
- this.nonTokenRe = new RegExp("^(?:[^"
- + unicode.packages.L
- + unicode.packages.Mn + unicode.packages.Mc
- + unicode.packages.Nd
- + unicode.packages.Pc + "\\$_]|\s])+", "g"
- );
-
- this.getTokenizer = function() {
- return this.$tokenizer;
- };
-
- this.toggleCommentLines = function(state, doc, startRow, endRow) {
- };
-
- this.getNextLineIndent = function(state, line, tab) {
- return "";
- };
-
- this.checkOutdent = function(state, line, input) {
- return false;
- };
-
- this.autoOutdent = function(state, doc, row) {
- };
-
- this.$getIndent = function(line) {
- var match = line.match(/^(\s+)/);
- if (match) {
- return match[1];
- }
-
- return "";
- };
-
- this.createWorker = function(session) {
- return null;
- };
-
- this.highlightSelection = function(editor) {
- var session = editor.session;
- if (!session.$selectionOccurrences)
- session.$selectionOccurrences = [];
-
- if (session.$selectionOccurrences.length)
- this.clearSelectionHighlight(editor);
-
- var selection = editor.getSelectionRange();
- if (selection.isEmpty() || selection.isMultiLine())
- return;
-
- var startOuter = selection.start.column - 1;
- var endOuter = selection.end.column + 1;
- var line = session.getLine(selection.start.row);
- var lineCols = line.length;
- var needle = line.substring(Math.max(startOuter, 0),
- Math.min(endOuter, lineCols));
-
- // Make sure the outer characters are not part of the word.
- if ((startOuter >= 0 && /^[\w\d]/.test(needle)) ||
- (endOuter <= lineCols && /[\w\d]$/.test(needle)))
- return;
-
- needle = line.substring(selection.start.column, selection.end.column);
- if (!/^[\w\d]+$/.test(needle))
- return;
-
- var cursor = editor.getCursorPosition();
-
- var newOptions = {
- wrap: true,
- wholeWord: true,
- caseSensitive: true,
- needle: needle
- };
-
- var currentOptions = editor.$search.getOptions();
- editor.$search.set(newOptions);
-
- var ranges = editor.$search.findAll(session);
- ranges.forEach(function(range) {
- if (!range.contains(cursor.row, cursor.column)) {
- var marker = session.addMarker(range, "ace_selected_word", "text");
- session.$selectionOccurrences.push(marker);
- }
- });
-
- editor.$search.set(currentOptions);
- };
-
- this.clearSelectionHighlight = function(editor) {
- if (!editor.session.$selectionOccurrences)
- return;
-
- editor.session.$selectionOccurrences.forEach(function(marker) {
- editor.session.removeMarker(marker);
- });
-
- editor.session.$selectionOccurrences = [];
- };
-
- this.createModeDelegates = function (mapping) {
- if (!this.$embeds) {
- return;
- }
- this.$modes = {};
- for (var i = 0; i < this.$embeds.length; i++) {
- if (mapping[this.$embeds[i]]) {
- this.$modes[this.$embeds[i]] = new mapping[this.$embeds[i]]();
- }
- }
-
- var delegations = ['toggleCommentLines', 'getNextLineIndent', 'checkOutdent', 'autoOutdent', 'transformAction'];
-
- for (var i = 0; i < delegations.length; i++) {
- (function(scope) {
- var functionName = delegations[i];
- var defaultHandler = scope[functionName];
- scope[delegations[i]] = function() {
- return this.$delegator(functionName, arguments, defaultHandler);
- }
- } (this));
- }
- }
-
- this.$delegator = function(method, args, defaultHandler) {
- var state = args[0];
-
- for (var i = 0; i < this.$embeds.length; i++) {
- if (!this.$modes[this.$embeds[i]]) continue;
-
- var split = state.split(this.$embeds[i]);
- if (!split[0] && split[1]) {
- args[0] = split[1];
- var mode = this.$modes[this.$embeds[i]];
- return mode[method].apply(mode, args);
- }
- }
- var ret = defaultHandler.apply(this, args);
- return defaultHandler ? ret : undefined;
- };
-
- this.transformAction = function(state, action, editor, session, param) {
- if (this.$behaviour) {
- var behaviours = this.$behaviour.getBehaviours();
- for (var key in behaviours) {
- if (behaviours[key][action]) {
- var ret = behaviours[key][action].apply(this, arguments);
- if (ret !== false) {
- return ret;
- }
- }
- }
- }
- return false;
- }
-
-}).call(Mode.prototype);
-
-exports.Mode = Mode;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/tokenizer', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var Tokenizer = function(rules) {
- this.rules = rules;
-
- this.regExps = {};
- this.matchMappings = {};
- for ( var key in this.rules) {
- var rule = this.rules[key];
- var state = rule;
- var ruleRegExps = [];
- var matchTotal = 0;
- var mapping = this.matchMappings[key] = {};
-
- for ( var i = 0; i < state.length; i++) {
- // Count number of matching groups. 2 extra groups from the full match
- // And the catch-all on the end (used to force a match);
- var matchcount = new RegExp("(?:(" + state[i].regex + ")|(.))").exec("a").length - 2;
-
- // Replace any backreferences and offset appropriately.
- var adjustedregex = state[i].regex.replace(/\\([0-9]+)/g, function (match, digit) {
- return "\\" + (parseInt(digit, 10) + matchTotal + 1);
- });
-
- mapping[matchTotal] = {
- rule: i,
- len: matchcount
- };
- matchTotal += matchcount;
-
- ruleRegExps.push(adjustedregex);
- }
-
- this.regExps[key] = new RegExp("(?:(" + ruleRegExps.join(")|(") + ")|(.))", "g");
- }
-};
-
-(function() {
-
- this.getLineTokens = function(line, startState) {
- var currentState = startState;
- var state = this.rules[currentState];
- var mapping = this.matchMappings[currentState];
- var re = this.regExps[currentState];
- re.lastIndex = 0;
-
- var match, tokens = [];
-
- var lastIndex = 0;
-
- var token = {
- type: null,
- value: ""
- };
-
- while (match = re.exec(line)) {
- var type = "text";
- var rule = null;
- var value = [match[0]];
-
- for (var i = 0; i < match.length-2; i++) {
- if (match[i + 1] !== undefined) {
- rule = state[mapping[i].rule];
-
- if (mapping[i].len > 1) {
- value = match.slice(i+2, i+1+mapping[i].len);
- }
-
- // compute token type
- if (typeof rule.token == "function")
- type = rule.token.apply(this, value);
- else
- type = rule.token;
-
- var next = rule.next;
- if (next && next !== currentState) {
- currentState = next;
- state = this.rules[currentState];
- mapping = this.matchMappings[currentState];
- lastIndex = re.lastIndex;
-
- re = this.regExps[currentState];
- re.lastIndex = lastIndex;
- }
- break;
- }
- };
-
- if (value[0]) {
- if (typeof type == "string") {
- value = [value.join("")];
- type = [type];
- }
- for (var i = 0; i < value.length; i++) {
- if ((!rule || rule.merge || type[i] === "text") && token.type === type[i]) {
- token.value += value[i];
- } else {
- if (token.type) {
- tokens.push(token);
- }
-
- token = {
- type: type[i],
- value: value[i]
- }
- }
- }
- }
-
- if (lastIndex == line.length)
- break;
-
- lastIndex = re.lastIndex;
- };
-
- if (token.type)
- tokens.push(token);
-
- return {
- tokens : tokens,
- state : currentState
- };
- };
-
-}).call(Tokenizer.prototype);
-
-exports.Tokenizer = Tokenizer;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/mode/text_highlight_rules', ['require', 'exports', 'module' , 'pilot/lang'], function(require, exports, module) {
-
-var lang = require("pilot/lang");
-
-var TextHighlightRules = function() {
-
- // regexp must not have capturing parentheses
- // regexps are ordered -> the first match is used
-
- this.$rules = {
- "start" : [{
- token : "empty_line",
- regex : '^$'
- }, {
- token : "text",
- regex : ".+"
- }]
- };
-};
-
-(function() {
-
- this.addRules = function(rules, prefix) {
- for (var key in rules) {
- var state = rules[key];
- for (var i=0; i<state.length; i++) {
- var rule = state[i];
- if (rule.next) {
- rule.next = prefix + rule.next;
- } else {
- rule.next = prefix + key;
- }
- }
- this.$rules[prefix + key] = state;
- }
- };
-
- this.getRules = function() {
- return this.$rules;
- };
-
- this.embedRules = function (HighlightRules, prefix, escapeRules, states) {
- var embedRules = new HighlightRules().getRules();
- if (states) {
- for (var i = 0; i < states.length; i++) {
- states[i] = prefix + states[i];
- }
- } else {
- states = [];
- for (var key in embedRules) {
- states.push(prefix + key);
- }
- }
- this.addRules(embedRules, prefix);
-
- for (var i = 0; i < states.length; i++) {
- Array.prototype.unshift.apply(this.$rules[states[i]], lang.deepCopy(escapeRules));
- }
-
- if (!this.$embeds) {
- this.$embeds = [];
- }
- this.$embeds.push(prefix);
- }
-
- this.getEmbeds = function() {
- return this.$embeds;
- }
-
-}).call(TextHighlightRules.prototype);
-
-exports.TextHighlightRules = TextHighlightRules;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Chris Spencer <chris.ag.spencer AT googlemail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/mode/behaviour', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var Behaviour = function() {
- this.$behaviours = {};
-};
-
-(function () {
-
- this.add = function (name, action, callback) {
- switch (undefined) {
- case this.$behaviours:
- this.$behaviours = {};
- case this.$behaviours[name]:
- this.$behaviours[name] = {};
- }
- this.$behaviours[name][action] = callback;
- }
-
- this.addBehaviours = function (behaviours) {
- for (var key in behaviours) {
- for (var action in behaviours[key]) {
- this.add(key, action, behaviours[key][action]);
- }
- }
- }
-
- this.remove = function (name) {
- if (this.$behaviours && this.$behaviours[name]) {
- delete this.$behaviours[name];
- }
- }
-
- this.inherit = function (mode, filter) {
- if (typeof mode === "function") {
- var behaviours = new mode().getBehaviours(filter);
- } else {
- var behaviours = mode.getBehaviours(filter);
- }
- this.addBehaviours(behaviours);
- }
-
- this.getBehaviours = function (filter) {
- if (!filter) {
- return this.$behaviours;
- } else {
- var ret = {}
- for (var i = 0; i < filter.length; i++) {
- if (this.$behaviours[filter[i]]) {
- ret[filter[i]] = this.$behaviours[filter[i]];
- }
- }
- return ret;
- }
- }
-
-}).call(Behaviour.prototype);
-
-exports.Behaviour = Behaviour;
-});define('ace/unicode', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-/*
-XRegExp Unicode plugin pack: Categories 1.0
-(c) 2010 Steven Levithan
-MIT License
-<http://xregexp.com>
-Uses the Unicode 5.2 character database
-
-This package for the XRegExp Unicode plugin enables the following Unicode categories (aka properties):
-
-L - Letter (the top-level Letter category is included in the Unicode plugin base script)
- Ll - Lowercase letter
- Lu - Uppercase letter
- Lt - Titlecase letter
- Lm - Modifier letter
- Lo - Letter without case
-M - Mark
- Mn - Non-spacing mark
- Mc - Spacing combining mark
- Me - Enclosing mark
-N - Number
- Nd - Decimal digit
- Nl - Letter number
- No - Other number
-P - Punctuation
- Pd - Dash punctuation
- Ps - Open punctuation
- Pe - Close punctuation
- Pi - Initial punctuation
- Pf - Final punctuation
- Pc - Connector punctuation
- Po - Other punctuation
-S - Symbol
- Sm - Math symbol
- Sc - Currency symbol
- Sk - Modifier symbol
- So - Other symbol
-Z - Separator
- Zs - Space separator
- Zl - Line separator
- Zp - Paragraph separator
-C - Other
- Cc - Control
- Cf - Format
- Co - Private use
- Cs - Surrogate
- Cn - Unassigned
-
-Example usage:
-
- \p{N}
- \p{Cn}
-*/
-
-
-// will be populated by addUnicodePackage
-exports.packages = {};
-
-addUnicodePackage({
- L: "0041-005A0061-007A00AA00B500BA00C0-00D600D8-00F600F8-02C102C6-02D102E0-02E402EC02EE0370-037403760377037A-037D03860388-038A038C038E-03A103A3-03F503F7-0481048A-05250531-055605590561-058705D0-05EA05F0-05F20621-064A066E066F0671-06D306D506E506E606EE06EF06FA-06FC06FF07100712-072F074D-07A507B107CA-07EA07F407F507FA0800-0815081A082408280904-0939093D09500958-0961097109720979-097F0985-098C098F09900993-09A809AA-09B009B209B6-09B909BD09CE09DC09DD09DF-09E109F009F10A05-0A0A0A0F0A100A13-0A280A2A-0A300A320A330A350A360A380A390A59-0A5C0A5E0A72-0A740A85-0A8D0A8F-0A910A93-0AA80AAA-0AB00AB20AB30AB5-0AB90ABD0AD00AE00AE10B05-0B0C0B0F0B100B13-0B280B2A-0B300B320B330B35-0B390B3D0B5C0B5D0B5F-0B610B710B830B85-0B8A0B8E-0B900B92-0B950B990B9A0B9C0B9E0B9F0BA30BA40BA8-0BAA0BAE-0BB90BD00C05-0C0C0C0E-0C100C12-0C280C2A-0C330C35-0C390C3D0C580C590C600C610C85-0C8C0C8E-0C900C92-0CA80CAA-0CB30CB5-0CB90CBD0CDE0CE00CE10D05-0D0C0D0E-0D100D12-0D280D2A-0D390D3D0D600D610D7A-0D7F0D85-0D960D9A-0DB10DB3-0DBB0DBD0DC0-0DC60E01-0E300E320E330E40-0E460E810E820E840E870E880E8A0E8D0E94-0E970E99-0E9F0EA1-0EA30EA50EA70EAA0EAB0EAD-0EB00EB20EB30EBD0EC0-0EC40EC60EDC0EDD0F000F40-0F470F49-0F6C0F88-0F8B1000-102A103F1050-1055105A-105D106110651066106E-10701075-1081108E10A0-10C510D0-10FA10FC1100-1248124A-124D1250-12561258125A-125D1260-1288128A-128D1290-12B012B2-12B512B8-12BE12C012C2-12C512C8-12D612D8-13101312-13151318-135A1380-138F13A0-13F41401-166C166F-167F1681-169A16A0-16EA1700-170C170E-17111720-17311740-17511760-176C176E-17701780-17B317D717DC1820-18771880-18A818AA18B0-18F51900-191C1950-196D1970-19741980-19AB19C1-19C71A00-1A161A20-1A541AA71B05-1B331B45-1B4B1B83-1BA01BAE1BAF1C00-1C231C4D-1C4F1C5A-1C7D1CE9-1CEC1CEE-1CF11D00-1DBF1E00-1F151F18-1F1D1F20-1F451F48-1F4D1F50-1F571F591F5B1F5D1F5F-1F7D1F80-1FB41FB6-1FBC1FBE1FC2-1FC41FC6-1FCC1FD0-1FD31FD6-1FDB1FE0-1FEC1FF2-1FF41FF6-1FFC2071207F2090-209421022107210A-211321152119-211D212421262128212A-212D212F-2139213C-213F2145-2149214E218321842C00-2C2E2C30-2C5E2C60-2CE42CEB-2CEE2D00-2D252D30-2D652D6F2D80-2D962DA0-2DA62DA8-2DAE2DB0-2DB62DB8-2DBE2DC0-2DC62DC8-2DCE2DD0-2DD62DD8-2DDE2E2F300530063031-3035303B303C3041-3096309D-309F30A1-30FA30FC-30FF3105-312D3131-318E31A0-31B731F0-31FF3400-4DB54E00-9FCBA000-A48CA4D0-A4FDA500-A60CA610-A61FA62AA62BA640-A65FA662-A66EA67F-A697A6A0-A6E5A717-A71FA722-A788A78BA78CA7FB-A801A803-A805A807-A80AA80C-A822A840-A873A882-A8B3A8F2-A8F7A8FBA90A-A925A930-A946A960-A97CA984-A9B2A9CFAA00-AA28AA40-AA42AA44-AA4BAA60-AA76AA7AAA80-AAAFAAB1AAB5AAB6AAB9-AABDAAC0AAC2AADB-AADDABC0-ABE2AC00-D7A3D7B0-D7C6D7CB-D7FBF900-FA2DFA30-FA6DFA70-FAD9FB00-FB06FB13-FB17FB1DFB1F-FB28FB2A-FB36FB38-FB3CFB3EFB40FB41FB43FB44FB46-FBB1FBD3-FD3DFD50-FD8FFD92-FDC7FDF0-FDFBFE70-FE74FE76-FEFCFF21-FF3AFF41-FF5AFF66-FFBEFFC2-FFC7FFCA-FFCFFFD2-FFD7FFDA-FFDC",
- Ll: "0061-007A00AA00B500BA00DF-00F600F8-00FF01010103010501070109010B010D010F01110113011501170119011B011D011F01210123012501270129012B012D012F01310133013501370138013A013C013E014001420144014601480149014B014D014F01510153015501570159015B015D015F01610163016501670169016B016D016F0171017301750177017A017C017E-0180018301850188018C018D019201950199-019B019E01A101A301A501A801AA01AB01AD01B001B401B601B901BA01BD-01BF01C601C901CC01CE01D001D201D401D601D801DA01DC01DD01DF01E101E301E501E701E901EB01ED01EF01F001F301F501F901FB01FD01FF02010203020502070209020B020D020F02110213021502170219021B021D021F02210223022502270229022B022D022F02310233-0239023C023F0240024202470249024B024D024F-02930295-02AF037103730377037B-037D039003AC-03CE03D003D103D5-03D703D903DB03DD03DF03E103E303E503E703E903EB03ED03EF-03F303F503F803FB03FC0430-045F04610463046504670469046B046D046F04710473047504770479047B047D047F0481048B048D048F04910493049504970499049B049D049F04A104A304A504A704A904AB04AD04AF04B104B304B504B704B904BB04BD04BF04C204C404C604C804CA04CC04CE04CF04D104D304D504D704D904DB04DD04DF04E104E304E504E704E904EB04ED04EF04F104F304F504F704F904FB04FD04FF05010503050505070509050B050D050F05110513051505170519051B051D051F0521052305250561-05871D00-1D2B1D62-1D771D79-1D9A1E011E031E051E071E091E0B1E0D1E0F1E111E131E151E171E191E1B1E1D1E1F1E211E231E251E271E291E2B1E2D1E2F1E311E331E351E371E391E3B1E3D1E3F1E411E431E451E471E491E4B1E4D1E4F1E511E531E551E571E591E5B1E5D1E5F1E611E631E651E671E691E6B1E6D1E6F1E711E731E751E771E791E7B1E7D1E7F1E811E831E851E871E891E8B1E8D1E8F1E911E931E95-1E9D1E9F1EA11EA31EA51EA71EA91EAB1EAD1EAF1EB11EB31EB51EB71EB91EBB1EBD1EBF1EC11EC31EC51EC71EC91ECB1ECD1ECF1ED11ED31ED51ED71ED91EDB1EDD1EDF1EE11EE31EE51EE71EE91EEB1EED1EEF1EF11EF31EF51EF71EF91EFB1EFD1EFF-1F071F10-1F151F20-1F271F30-1F371F40-1F451F50-1F571F60-1F671F70-1F7D1F80-1F871F90-1F971FA0-1FA71FB0-1FB41FB61FB71FBE1FC2-1FC41FC61FC71FD0-1FD31FD61FD71FE0-1FE71FF2-1FF41FF61FF7210A210E210F2113212F21342139213C213D2146-2149214E21842C30-2C5E2C612C652C662C682C6A2C6C2C712C732C742C76-2C7C2C812C832C852C872C892C8B2C8D2C8F2C912C932C952C972C992C9B2C9D2C9F2CA12CA32CA52CA72CA92CAB2CAD2CAF2CB12CB32CB52CB72CB92CBB2CBD2CBF2CC12CC32CC52CC72CC92CCB2CCD2CCF2CD12CD32CD52CD72CD92CDB2CDD2CDF2CE12CE32CE42CEC2CEE2D00-2D25A641A643A645A647A649A64BA64DA64FA651A653A655A657A659A65BA65DA65FA663A665A667A669A66BA66DA681A683A685A687A689A68BA68DA68FA691A693A695A697A723A725A727A729A72BA72DA72F-A731A733A735A737A739A73BA73DA73FA741A743A745A747A749A74BA74DA74FA751A753A755A757A759A75BA75DA75FA761A763A765A767A769A76BA76DA76FA771-A778A77AA77CA77FA781A783A785A787A78CFB00-FB06FB13-FB17FF41-FF5A",
- Lu: "0041-005A00C0-00D600D8-00DE01000102010401060108010A010C010E01100112011401160118011A011C011E01200122012401260128012A012C012E01300132013401360139013B013D013F0141014301450147014A014C014E01500152015401560158015A015C015E01600162016401660168016A016C016E017001720174017601780179017B017D018101820184018601870189-018B018E-0191019301940196-0198019C019D019F01A001A201A401A601A701A901AC01AE01AF01B1-01B301B501B701B801BC01C401C701CA01CD01CF01D101D301D501D701D901DB01DE01E001E201E401E601E801EA01EC01EE01F101F401F6-01F801FA01FC01FE02000202020402060208020A020C020E02100212021402160218021A021C021E02200222022402260228022A022C022E02300232023A023B023D023E02410243-02460248024A024C024E03700372037603860388-038A038C038E038F0391-03A103A3-03AB03CF03D2-03D403D803DA03DC03DE03E003E203E403E603E803EA03EC03EE03F403F703F903FA03FD-042F04600462046404660468046A046C046E04700472047404760478047A047C047E0480048A048C048E04900492049404960498049A049C049E04A004A204A404A604A804AA04AC04AE04B004B204B404B604B804BA04BC04BE04C004C104C304C504C704C904CB04CD04D004D204D404D604D804DA04DC04DE04E004E204E404E604E804EA04EC04EE04F004F204F404F604F804FA04FC04FE05000502050405060508050A050C050E05100512051405160518051A051C051E0520052205240531-055610A0-10C51E001E021E041E061E081E0A1E0C1E0E1E101E121E141E161E181E1A1E1C1E1E1E201E221E241E261E281E2A1E2C1E2E1E301E321E341E361E381E3A1E3C1E3E1E401E421E441E461E481E4A1E4C1E4E1E501E521E541E561E581E5A1E5C1E5E1E601E621E641E661E681E6A1E6C1E6E1E701E721E741E761E781E7A1E7C1E7E1E801E821E841E861E881E8A1E8C1E8E1E901E921E941E9E1EA01EA21EA41EA61EA81EAA1EAC1EAE1EB01EB21EB41EB61EB81EBA1EBC1EBE1EC01EC21EC41EC61EC81ECA1ECC1ECE1ED01ED21ED41ED61ED81EDA1EDC1EDE1EE01EE21EE41EE61EE81EEA1EEC1EEE1EF01EF21EF41EF61EF81EFA1EFC1EFE1F08-1F0F1F18-1F1D1F28-1F2F1F38-1F3F1F48-1F4D1F591F5B1F5D1F5F1F68-1F6F1FB8-1FBB1FC8-1FCB1FD8-1FDB1FE8-1FEC1FF8-1FFB21022107210B-210D2110-211221152119-211D212421262128212A-212D2130-2133213E213F214521832C00-2C2E2C602C62-2C642C672C692C6B2C6D-2C702C722C752C7E-2C802C822C842C862C882C8A2C8C2C8E2C902C922C942C962C982C9A2C9C2C9E2CA02CA22CA42CA62CA82CAA2CAC2CAE2CB02CB22CB42CB62CB82CBA2CBC2CBE2CC02CC22CC42CC62CC82CCA2CCC2CCE2CD02CD22CD42CD62CD82CDA2CDC2CDE2CE02CE22CEB2CEDA640A642A644A646A648A64AA64CA64EA650A652A654A656A658A65AA65CA65EA662A664A666A668A66AA66CA680A682A684A686A688A68AA68CA68EA690A692A694A696A722A724A726A728A72AA72CA72EA732A734A736A738A73AA73CA73EA740A742A744A746A748A74AA74CA74EA750A752A754A756A758A75AA75CA75EA760A762A764A766A768A76AA76CA76EA779A77BA77DA77EA780A782A784A786A78BFF21-FF3A",
- Lt: "01C501C801CB01F21F88-1F8F1F98-1F9F1FA8-1FAF1FBC1FCC1FFC",
- Lm: "02B0-02C102C6-02D102E0-02E402EC02EE0374037A0559064006E506E607F407F507FA081A0824082809710E460EC610FC17D718431AA71C78-1C7D1D2C-1D611D781D9B-1DBF2071207F2090-20942C7D2D6F2E2F30053031-3035303B309D309E30FC-30FEA015A4F8-A4FDA60CA67FA717-A71FA770A788A9CFAA70AADDFF70FF9EFF9F",
- Lo: "01BB01C0-01C3029405D0-05EA05F0-05F20621-063F0641-064A066E066F0671-06D306D506EE06EF06FA-06FC06FF07100712-072F074D-07A507B107CA-07EA0800-08150904-0939093D09500958-096109720979-097F0985-098C098F09900993-09A809AA-09B009B209B6-09B909BD09CE09DC09DD09DF-09E109F009F10A05-0A0A0A0F0A100A13-0A280A2A-0A300A320A330A350A360A380A390A59-0A5C0A5E0A72-0A740A85-0A8D0A8F-0A910A93-0AA80AAA-0AB00AB20AB30AB5-0AB90ABD0AD00AE00AE10B05-0B0C0B0F0B100B13-0B280B2A-0B300B320B330B35-0B390B3D0B5C0B5D0B5F-0B610B710B830B85-0B8A0B8E-0B900B92-0B950B990B9A0B9C0B9E0B9F0BA30BA40BA8-0BAA0BAE-0BB90BD00C05-0C0C0C0E-0C100C12-0C280C2A-0C330C35-0C390C3D0C580C590C600C610C85-0C8C0C8E-0C900C92-0CA80CAA-0CB30CB5-0CB90CBD0CDE0CE00CE10D05-0D0C0D0E-0D100D12-0D280D2A-0D390D3D0D600D610D7A-0D7F0D85-0D960D9A-0DB10DB3-0DBB0DBD0DC0-0DC60E01-0E300E320E330E40-0E450E810E820E840E870E880E8A0E8D0E94-0E970E99-0E9F0EA1-0EA30EA50EA70EAA0EAB0EAD-0EB00EB20EB30EBD0EC0-0EC40EDC0EDD0F000F40-0F470F49-0F6C0F88-0F8B1000-102A103F1050-1055105A-105D106110651066106E-10701075-1081108E10D0-10FA1100-1248124A-124D1250-12561258125A-125D1260-1288128A-128D1290-12B012B2-12B512B8-12BE12C012C2-12C512C8-12D612D8-13101312-13151318-135A1380-138F13A0-13F41401-166C166F-167F1681-169A16A0-16EA1700-170C170E-17111720-17311740-17511760-176C176E-17701780-17B317DC1820-18421844-18771880-18A818AA18B0-18F51900-191C1950-196D1970-19741980-19AB19C1-19C71A00-1A161A20-1A541B05-1B331B45-1B4B1B83-1BA01BAE1BAF1C00-1C231C4D-1C4F1C5A-1C771CE9-1CEC1CEE-1CF12135-21382D30-2D652D80-2D962DA0-2DA62DA8-2DAE2DB0-2DB62DB8-2DBE2DC0-2DC62DC8-2DCE2DD0-2DD62DD8-2DDE3006303C3041-3096309F30A1-30FA30FF3105-312D3131-318E31A0-31B731F0-31FF3400-4DB54E00-9FCBA000-A014A016-A48CA4D0-A4F7A500-A60BA610-A61FA62AA62BA66EA6A0-A6E5A7FB-A801A803-A805A807-A80AA80C-A822A840-A873A882-A8B3A8F2-A8F7A8FBA90A-A925A930-A946A960-A97CA984-A9B2AA00-AA28AA40-AA42AA44-AA4BAA60-AA6FAA71-AA76AA7AAA80-AAAFAAB1AAB5AAB6AAB9-AABDAAC0AAC2AADBAADCABC0-ABE2AC00-D7A3D7B0-D7C6D7CB-D7FBF900-FA2DFA30-FA6DFA70-FAD9FB1DFB1F-FB28FB2A-FB36FB38-FB3CFB3EFB40FB41FB43FB44FB46-FBB1FBD3-FD3DFD50-FD8FFD92-FDC7FDF0-FDFBFE70-FE74FE76-FEFCFF66-FF6FFF71-FF9DFFA0-FFBEFFC2-FFC7FFCA-FFCFFFD2-FFD7FFDA-FFDC",
- M: "0300-036F0483-04890591-05BD05BF05C105C205C405C505C70610-061A064B-065E067006D6-06DC06DE-06E406E706E806EA-06ED07110730-074A07A6-07B007EB-07F30816-0819081B-08230825-08270829-082D0900-0903093C093E-094E0951-0955096209630981-098309BC09BE-09C409C709C809CB-09CD09D709E209E30A01-0A030A3C0A3E-0A420A470A480A4B-0A4D0A510A700A710A750A81-0A830ABC0ABE-0AC50AC7-0AC90ACB-0ACD0AE20AE30B01-0B030B3C0B3E-0B440B470B480B4B-0B4D0B560B570B620B630B820BBE-0BC20BC6-0BC80BCA-0BCD0BD70C01-0C030C3E-0C440C46-0C480C4A-0C4D0C550C560C620C630C820C830CBC0CBE-0CC40CC6-0CC80CCA-0CCD0CD50CD60CE20CE30D020D030D3E-0D440D46-0D480D4A-0D4D0D570D620D630D820D830DCA0DCF-0DD40DD60DD8-0DDF0DF20DF30E310E34-0E3A0E47-0E4E0EB10EB4-0EB90EBB0EBC0EC8-0ECD0F180F190F350F370F390F3E0F3F0F71-0F840F860F870F90-0F970F99-0FBC0FC6102B-103E1056-1059105E-10601062-10641067-106D1071-10741082-108D108F109A-109D135F1712-17141732-1734175217531772177317B6-17D317DD180B-180D18A91920-192B1930-193B19B0-19C019C819C91A17-1A1B1A55-1A5E1A60-1A7C1A7F1B00-1B041B34-1B441B6B-1B731B80-1B821BA1-1BAA1C24-1C371CD0-1CD21CD4-1CE81CED1CF21DC0-1DE61DFD-1DFF20D0-20F02CEF-2CF12DE0-2DFF302A-302F3099309AA66F-A672A67CA67DA6F0A6F1A802A806A80BA823-A827A880A881A8B4-A8C4A8E0-A8F1A926-A92DA947-A953A980-A983A9B3-A9C0AA29-AA36AA43AA4CAA4DAA7BAAB0AAB2-AAB4AAB7AAB8AABEAABFAAC1ABE3-ABEAABECABEDFB1EFE00-FE0FFE20-FE26",
- Mn: "0300-036F0483-04870591-05BD05BF05C105C205C405C505C70610-061A064B-065E067006D6-06DC06DF-06E406E706E806EA-06ED07110730-074A07A6-07B007EB-07F30816-0819081B-08230825-08270829-082D0900-0902093C0941-0948094D0951-095509620963098109BC09C1-09C409CD09E209E30A010A020A3C0A410A420A470A480A4B-0A4D0A510A700A710A750A810A820ABC0AC1-0AC50AC70AC80ACD0AE20AE30B010B3C0B3F0B41-0B440B4D0B560B620B630B820BC00BCD0C3E-0C400C46-0C480C4A-0C4D0C550C560C620C630CBC0CBF0CC60CCC0CCD0CE20CE30D41-0D440D4D0D620D630DCA0DD2-0DD40DD60E310E34-0E3A0E47-0E4E0EB10EB4-0EB90EBB0EBC0EC8-0ECD0F180F190F350F370F390F71-0F7E0F80-0F840F860F870F90-0F970F99-0FBC0FC6102D-10301032-10371039103A103D103E10581059105E-10601071-1074108210851086108D109D135F1712-17141732-1734175217531772177317B7-17BD17C617C9-17D317DD180B-180D18A91920-19221927192819321939-193B1A171A181A561A58-1A5E1A601A621A65-1A6C1A73-1A7C1A7F1B00-1B031B341B36-1B3A1B3C1B421B6B-1B731B801B811BA2-1BA51BA81BA91C2C-1C331C361C371CD0-1CD21CD4-1CE01CE2-1CE81CED1DC0-1DE61DFD-1DFF20D0-20DC20E120E5-20F02CEF-2CF12DE0-2DFF302A-302F3099309AA66FA67CA67DA6F0A6F1A802A806A80BA825A826A8C4A8E0-A8F1A926-A92DA947-A951A980-A982A9B3A9B6-A9B9A9BCAA29-AA2EAA31AA32AA35AA36AA43AA4CAAB0AAB2-AAB4AAB7AAB8AABEAABFAAC1ABE5ABE8ABEDFB1EFE00-FE0FFE20-FE26",
- Mc: "0903093E-09400949-094C094E0982098309BE-09C009C709C809CB09CC09D70A030A3E-0A400A830ABE-0AC00AC90ACB0ACC0B020B030B3E0B400B470B480B4B0B4C0B570BBE0BBF0BC10BC20BC6-0BC80BCA-0BCC0BD70C01-0C030C41-0C440C820C830CBE0CC0-0CC40CC70CC80CCA0CCB0CD50CD60D020D030D3E-0D400D46-0D480D4A-0D4C0D570D820D830DCF-0DD10DD8-0DDF0DF20DF30F3E0F3F0F7F102B102C10311038103B103C105610571062-10641067-106D108310841087-108C108F109A-109C17B617BE-17C517C717C81923-19261929-192B193019311933-193819B0-19C019C819C91A19-1A1B1A551A571A611A631A641A6D-1A721B041B351B3B1B3D-1B411B431B441B821BA11BA61BA71BAA1C24-1C2B1C341C351CE11CF2A823A824A827A880A881A8B4-A8C3A952A953A983A9B4A9B5A9BAA9BBA9BD-A9C0AA2FAA30AA33AA34AA4DAA7BABE3ABE4ABE6ABE7ABE9ABEAABEC",
- Me: "0488048906DE20DD-20E020E2-20E4A670-A672",
- N: "0030-003900B200B300B900BC-00BE0660-066906F0-06F907C0-07C90966-096F09E6-09EF09F4-09F90A66-0A6F0AE6-0AEF0B66-0B6F0BE6-0BF20C66-0C6F0C78-0C7E0CE6-0CEF0D66-0D750E50-0E590ED0-0ED90F20-0F331040-10491090-10991369-137C16EE-16F017E0-17E917F0-17F91810-18191946-194F19D0-19DA1A80-1A891A90-1A991B50-1B591BB0-1BB91C40-1C491C50-1C5920702074-20792080-20892150-21822185-21892460-249B24EA-24FF2776-27932CFD30073021-30293038-303A3192-31953220-32293251-325F3280-328932B1-32BFA620-A629A6E6-A6EFA830-A835A8D0-A8D9A900-A909A9D0-A9D9AA50-AA59ABF0-ABF9FF10-FF19",
- Nd: "0030-00390660-066906F0-06F907C0-07C90966-096F09E6-09EF0A66-0A6F0AE6-0AEF0B66-0B6F0BE6-0BEF0C66-0C6F0CE6-0CEF0D66-0D6F0E50-0E590ED0-0ED90F20-0F291040-10491090-109917E0-17E91810-18191946-194F19D0-19DA1A80-1A891A90-1A991B50-1B591BB0-1BB91C40-1C491C50-1C59A620-A629A8D0-A8D9A900-A909A9D0-A9D9AA50-AA59ABF0-ABF9FF10-FF19",
- Nl: "16EE-16F02160-21822185-218830073021-30293038-303AA6E6-A6EF",
- No: "00B200B300B900BC-00BE09F4-09F90BF0-0BF20C78-0C7E0D70-0D750F2A-0F331369-137C17F0-17F920702074-20792080-20892150-215F21892460-249B24EA-24FF2776-27932CFD3192-31953220-32293251-325F3280-328932B1-32BFA830-A835",
- P: "0021-00230025-002A002C-002F003A003B003F0040005B-005D005F007B007D00A100AB00B700BB00BF037E0387055A-055F0589058A05BE05C005C305C605F305F40609060A060C060D061B061E061F066A-066D06D40700-070D07F7-07F90830-083E0964096509700DF40E4F0E5A0E5B0F04-0F120F3A-0F3D0F850FD0-0FD4104A-104F10FB1361-13681400166D166E169B169C16EB-16ED1735173617D4-17D617D8-17DA1800-180A1944194519DE19DF1A1E1A1F1AA0-1AA61AA8-1AAD1B5A-1B601C3B-1C3F1C7E1C7F1CD32010-20272030-20432045-20512053-205E207D207E208D208E2329232A2768-277527C527C627E6-27EF2983-299829D8-29DB29FC29FD2CF9-2CFC2CFE2CFF2E00-2E2E2E302E313001-30033008-30113014-301F3030303D30A030FBA4FEA4FFA60D-A60FA673A67EA6F2-A6F7A874-A877A8CEA8CFA8F8-A8FAA92EA92FA95FA9C1-A9CDA9DEA9DFAA5C-AA5FAADEAADFABEBFD3EFD3FFE10-FE19FE30-FE52FE54-FE61FE63FE68FE6AFE6BFF01-FF03FF05-FF0AFF0C-FF0FFF1AFF1BFF1FFF20FF3B-FF3DFF3FFF5BFF5DFF5F-FF65",
- Pd: "002D058A05BE140018062010-20152E172E1A301C303030A0FE31FE32FE58FE63FF0D",
- Ps: "0028005B007B0F3A0F3C169B201A201E2045207D208D23292768276A276C276E27702772277427C527E627E827EA27EC27EE2983298529872989298B298D298F299129932995299729D829DA29FC2E222E242E262E283008300A300C300E3010301430163018301A301DFD3EFE17FE35FE37FE39FE3BFE3DFE3FFE41FE43FE47FE59FE5BFE5DFF08FF3BFF5BFF5FFF62",
- Pe: "0029005D007D0F3B0F3D169C2046207E208E232A2769276B276D276F27712773277527C627E727E927EB27ED27EF298429862988298A298C298E2990299229942996299829D929DB29FD2E232E252E272E293009300B300D300F3011301530173019301B301E301FFD3FFE18FE36FE38FE3AFE3CFE3EFE40FE42FE44FE48FE5AFE5CFE5EFF09FF3DFF5DFF60FF63",
- Pi: "00AB2018201B201C201F20392E022E042E092E0C2E1C2E20",
- Pf: "00BB2019201D203A2E032E052E0A2E0D2E1D2E21",
- Pc: "005F203F20402054FE33FE34FE4D-FE4FFF3F",
- Po: "0021-00230025-0027002A002C002E002F003A003B003F0040005C00A100B700BF037E0387055A-055F058905C005C305C605F305F40609060A060C060D061B061E061F066A-066D06D40700-070D07F7-07F90830-083E0964096509700DF40E4F0E5A0E5B0F04-0F120F850FD0-0FD4104A-104F10FB1361-1368166D166E16EB-16ED1735173617D4-17D617D8-17DA1800-18051807-180A1944194519DE19DF1A1E1A1F1AA0-1AA61AA8-1AAD1B5A-1B601C3B-1C3F1C7E1C7F1CD3201620172020-20272030-2038203B-203E2041-20432047-205120532055-205E2CF9-2CFC2CFE2CFF2E002E012E06-2E082E0B2E0E-2E162E182E192E1B2E1E2E1F2E2A-2E2E2E302E313001-3003303D30FBA4FEA4FFA60D-A60FA673A67EA6F2-A6F7A874-A877A8CEA8CFA8F8-A8FAA92EA92FA95FA9C1-A9CDA9DEA9DFAA5C-AA5FAADEAADFABEBFE10-FE16FE19FE30FE45FE46FE49-FE4CFE50-FE52FE54-FE57FE5F-FE61FE68FE6AFE6BFF01-FF03FF05-FF07FF0AFF0CFF0EFF0FFF1AFF1BFF1FFF20FF3CFF61FF64FF65",
- S: "0024002B003C-003E005E0060007C007E00A2-00A900AC00AE-00B100B400B600B800D700F702C2-02C502D2-02DF02E5-02EB02ED02EF-02FF03750384038503F604820606-0608060B060E060F06E906FD06FE07F609F209F309FA09FB0AF10B700BF3-0BFA0C7F0CF10CF20D790E3F0F01-0F030F13-0F170F1A-0F1F0F340F360F380FBE-0FC50FC7-0FCC0FCE0FCF0FD5-0FD8109E109F13601390-139917DB194019E0-19FF1B61-1B6A1B74-1B7C1FBD1FBF-1FC11FCD-1FCF1FDD-1FDF1FED-1FEF1FFD1FFE20442052207A-207C208A-208C20A0-20B8210021012103-21062108210921142116-2118211E-2123212521272129212E213A213B2140-2144214A-214D214F2190-2328232B-23E82400-24262440-244A249C-24E92500-26CD26CF-26E126E326E8-26FF2701-27042706-2709270C-27272729-274B274D274F-27522756-275E2761-276727942798-27AF27B1-27BE27C0-27C427C7-27CA27CC27D0-27E527F0-29822999-29D729DC-29FB29FE-2B4C2B50-2B592CE5-2CEA2E80-2E992E9B-2EF32F00-2FD52FF0-2FFB300430123013302030363037303E303F309B309C319031913196-319F31C0-31E33200-321E322A-32503260-327F328A-32B032C0-32FE3300-33FF4DC0-4DFFA490-A4C6A700-A716A720A721A789A78AA828-A82BA836-A839AA77-AA79FB29FDFCFDFDFE62FE64-FE66FE69FF04FF0BFF1C-FF1EFF3EFF40FF5CFF5EFFE0-FFE6FFE8-FFEEFFFCFFFD",
- Sm: "002B003C-003E007C007E00AC00B100D700F703F60606-060820442052207A-207C208A-208C2140-2144214B2190-2194219A219B21A021A321A621AE21CE21CF21D221D421F4-22FF2308-230B23202321237C239B-23B323DC-23E125B725C125F8-25FF266F27C0-27C427C7-27CA27CC27D0-27E527F0-27FF2900-29822999-29D729DC-29FB29FE-2AFF2B30-2B442B47-2B4CFB29FE62FE64-FE66FF0BFF1C-FF1EFF5CFF5EFFE2FFE9-FFEC",
- Sc: "002400A2-00A5060B09F209F309FB0AF10BF90E3F17DB20A0-20B8A838FDFCFE69FF04FFE0FFE1FFE5FFE6",
- Sk: "005E006000A800AF00B400B802C2-02C502D2-02DF02E5-02EB02ED02EF-02FF0375038403851FBD1FBF-1FC11FCD-1FCF1FDD-1FDF1FED-1FEF1FFD1FFE309B309CA700-A716A720A721A789A78AFF3EFF40FFE3",
- So: "00A600A700A900AE00B000B60482060E060F06E906FD06FE07F609FA0B700BF3-0BF80BFA0C7F0CF10CF20D790F01-0F030F13-0F170F1A-0F1F0F340F360F380FBE-0FC50FC7-0FCC0FCE0FCF0FD5-0FD8109E109F13601390-1399194019E0-19FF1B61-1B6A1B74-1B7C210021012103-21062108210921142116-2118211E-2123212521272129212E213A213B214A214C214D214F2195-2199219C-219F21A121A221A421A521A7-21AD21AF-21CD21D021D121D321D5-21F32300-2307230C-231F2322-2328232B-237B237D-239A23B4-23DB23E2-23E82400-24262440-244A249C-24E92500-25B625B8-25C025C2-25F72600-266E2670-26CD26CF-26E126E326E8-26FF2701-27042706-2709270C-27272729-274B274D274F-27522756-275E2761-276727942798-27AF27B1-27BE2800-28FF2B00-2B2F2B452B462B50-2B592CE5-2CEA2E80-2E992E9B-2EF32F00-2FD52FF0-2FFB300430123013302030363037303E303F319031913196-319F31C0-31E33200-321E322A-32503260-327F328A-32B032C0-32FE3300-33FF4DC0-4DFFA490-A4C6A828-A82BA836A837A839AA77-AA79FDFDFFE4FFE8FFEDFFEEFFFCFFFD",
- Z: "002000A01680180E2000-200A20282029202F205F3000",
- Zs: "002000A01680180E2000-200A202F205F3000",
- Zl: "2028",
- Zp: "2029",
- C: "0000-001F007F-009F00AD03780379037F-0383038B038D03A20526-05300557055805600588058B-059005C8-05CF05EB-05EF05F5-0605061C061D0620065F06DD070E070F074B074C07B2-07BF07FB-07FF082E082F083F-08FF093A093B094F095609570973-097809800984098D098E0991099209A909B109B3-09B509BA09BB09C509C609C909CA09CF-09D609D8-09DB09DE09E409E509FC-0A000A040A0B-0A0E0A110A120A290A310A340A370A3A0A3B0A3D0A43-0A460A490A4A0A4E-0A500A52-0A580A5D0A5F-0A650A76-0A800A840A8E0A920AA90AB10AB40ABA0ABB0AC60ACA0ACE0ACF0AD1-0ADF0AE40AE50AF00AF2-0B000B040B0D0B0E0B110B120B290B310B340B3A0B3B0B450B460B490B4A0B4E-0B550B58-0B5B0B5E0B640B650B72-0B810B840B8B-0B8D0B910B96-0B980B9B0B9D0BA0-0BA20BA5-0BA70BAB-0BAD0BBA-0BBD0BC3-0BC50BC90BCE0BCF0BD1-0BD60BD8-0BE50BFB-0C000C040C0D0C110C290C340C3A-0C3C0C450C490C4E-0C540C570C5A-0C5F0C640C650C70-0C770C800C810C840C8D0C910CA90CB40CBA0CBB0CC50CC90CCE-0CD40CD7-0CDD0CDF0CE40CE50CF00CF3-0D010D040D0D0D110D290D3A-0D3C0D450D490D4E-0D560D58-0D5F0D640D650D76-0D780D800D810D840D97-0D990DB20DBC0DBE0DBF0DC7-0DC90DCB-0DCE0DD50DD70DE0-0DF10DF5-0E000E3B-0E3E0E5C-0E800E830E850E860E890E8B0E8C0E8E-0E930E980EA00EA40EA60EA80EA90EAC0EBA0EBE0EBF0EC50EC70ECE0ECF0EDA0EDB0EDE-0EFF0F480F6D-0F700F8C-0F8F0F980FBD0FCD0FD9-0FFF10C6-10CF10FD-10FF1249124E124F12571259125E125F1289128E128F12B112B612B712BF12C112C612C712D7131113161317135B-135E137D-137F139A-139F13F5-13FF169D-169F16F1-16FF170D1715-171F1737-173F1754-175F176D17711774-177F17B417B517DE17DF17EA-17EF17FA-17FF180F181A-181F1878-187F18AB-18AF18F6-18FF191D-191F192C-192F193C-193F1941-1943196E196F1975-197F19AC-19AF19CA-19CF19DB-19DD1A1C1A1D1A5F1A7D1A7E1A8A-1A8F1A9A-1A9F1AAE-1AFF1B4C-1B4F1B7D-1B7F1BAB-1BAD1BBA-1BFF1C38-1C3A1C4A-1C4C1C80-1CCF1CF3-1CFF1DE7-1DFC1F161F171F1E1F1F1F461F471F4E1F4F1F581F5A1F5C1F5E1F7E1F7F1FB51FC51FD41FD51FDC1FF01FF11FF51FFF200B-200F202A-202E2060-206F20722073208F2095-209F20B9-20CF20F1-20FF218A-218F23E9-23FF2427-243F244B-245F26CE26E226E4-26E727002705270A270B2728274C274E2753-2755275F27602795-279727B027BF27CB27CD-27CF2B4D-2B4F2B5A-2BFF2C2F2C5F2CF2-2CF82D26-2D2F2D66-2D6E2D70-2D7F2D97-2D9F2DA72DAF2DB72DBF2DC72DCF2DD72DDF2E32-2E7F2E9A2EF4-2EFF2FD6-2FEF2FFC-2FFF3040309730983100-3104312E-3130318F31B8-31BF31E4-31EF321F32FF4DB6-4DBF9FCC-9FFFA48D-A48FA4C7-A4CFA62C-A63FA660A661A674-A67BA698-A69FA6F8-A6FFA78D-A7FAA82C-A82FA83A-A83FA878-A87FA8C5-A8CDA8DA-A8DFA8FC-A8FFA954-A95EA97D-A97FA9CEA9DA-A9DDA9E0-A9FFAA37-AA3FAA4EAA4FAA5AAA5BAA7C-AA7FAAC3-AADAAAE0-ABBFABEEABEFABFA-ABFFD7A4-D7AFD7C7-D7CAD7FC-F8FFFA2EFA2FFA6EFA6FFADA-FAFFFB07-FB12FB18-FB1CFB37FB3DFB3FFB42FB45FBB2-FBD2FD40-FD4FFD90FD91FDC8-FDEFFDFEFDFFFE1A-FE1FFE27-FE2FFE53FE67FE6C-FE6FFE75FEFD-FF00FFBF-FFC1FFC8FFC9FFD0FFD1FFD8FFD9FFDD-FFDFFFE7FFEF-FFFBFFFEFFFF",
- Cc: "0000-001F007F-009F",
- Cf: "00AD0600-060306DD070F17B417B5200B-200F202A-202E2060-2064206A-206FFEFFFFF9-FFFB",
- Co: "E000-F8FF",
- Cs: "D800-DFFF",
- Cn: "03780379037F-0383038B038D03A20526-05300557055805600588058B-059005C8-05CF05EB-05EF05F5-05FF06040605061C061D0620065F070E074B074C07B2-07BF07FB-07FF082E082F083F-08FF093A093B094F095609570973-097809800984098D098E0991099209A909B109B3-09B509BA09BB09C509C609C909CA09CF-09D609D8-09DB09DE09E409E509FC-0A000A040A0B-0A0E0A110A120A290A310A340A370A3A0A3B0A3D0A43-0A460A490A4A0A4E-0A500A52-0A580A5D0A5F-0A650A76-0A800A840A8E0A920AA90AB10AB40ABA0ABB0AC60ACA0ACE0ACF0AD1-0ADF0AE40AE50AF00AF2-0B000B040B0D0B0E0B110B120B290B310B340B3A0B3B0B450B460B490B4A0B4E-0B550B58-0B5B0B5E0B640B650B72-0B810B840B8B-0B8D0B910B96-0B980B9B0B9D0BA0-0BA20BA5-0BA70BAB-0BAD0BBA-0BBD0BC3-0BC50BC90BCE0BCF0BD1-0BD60BD8-0BE50BFB-0C000C040C0D0C110C290C340C3A-0C3C0C450C490C4E-0C540C570C5A-0C5F0C640C650C70-0C770C800C810C840C8D0C910CA90CB40CBA0CBB0CC50CC90CCE-0CD40CD7-0CDD0CDF0CE40CE50CF00CF3-0D010D040D0D0D110D290D3A-0D3C0D450D490D4E-0D560D58-0D5F0D640D650D76-0D780D800D810D840D97-0D990DB20DBC0DBE0DBF0DC7-0DC90DCB-0DCE0DD50DD70DE0-0DF10DF5-0E000E3B-0E3E0E5C-0E800E830E850E860E890E8B0E8C0E8E-0E930E980EA00EA40EA60EA80EA90EAC0EBA0EBE0EBF0EC50EC70ECE0ECF0EDA0EDB0EDE-0EFF0F480F6D-0F700F8C-0F8F0F980FBD0FCD0FD9-0FFF10C6-10CF10FD-10FF1249124E124F12571259125E125F1289128E128F12B112B612B712BF12C112C612C712D7131113161317135B-135E137D-137F139A-139F13F5-13FF169D-169F16F1-16FF170D1715-171F1737-173F1754-175F176D17711774-177F17DE17DF17EA-17EF17FA-17FF180F181A-181F1878-187F18AB-18AF18F6-18FF191D-191F192C-192F193C-193F1941-1943196E196F1975-197F19AC-19AF19CA-19CF19DB-19DD1A1C1A1D1A5F1A7D1A7E1A8A-1A8F1A9A-1A9F1AAE-1AFF1B4C-1B4F1B7D-1B7F1BAB-1BAD1BBA-1BFF1C38-1C3A1C4A-1C4C1C80-1CCF1CF3-1CFF1DE7-1DFC1F161F171F1E1F1F1F461F471F4E1F4F1F581F5A1F5C1F5E1F7E1F7F1FB51FC51FD41FD51FDC1FF01FF11FF51FFF2065-206920722073208F2095-209F20B9-20CF20F1-20FF218A-218F23E9-23FF2427-243F244B-245F26CE26E226E4-26E727002705270A270B2728274C274E2753-2755275F27602795-279727B027BF27CB27CD-27CF2B4D-2B4F2B5A-2BFF2C2F2C5F2CF2-2CF82D26-2D2F2D66-2D6E2D70-2D7F2D97-2D9F2DA72DAF2DB72DBF2DC72DCF2DD72DDF2E32-2E7F2E9A2EF4-2EFF2FD6-2FEF2FFC-2FFF3040309730983100-3104312E-3130318F31B8-31BF31E4-31EF321F32FF4DB6-4DBF9FCC-9FFFA48D-A48FA4C7-A4CFA62C-A63FA660A661A674-A67BA698-A69FA6F8-A6FFA78D-A7FAA82C-A82FA83A-A83FA878-A87FA8C5-A8CDA8DA-A8DFA8FC-A8FFA954-A95EA97D-A97FA9CEA9DA-A9DDA9E0-A9FFAA37-AA3FAA4EAA4FAA5AAA5BAA7C-AA7FAAC3-AADAAAE0-ABBFABEEABEFABFA-ABFFD7A4-D7AFD7C7-D7CAD7FC-D7FFFA2EFA2FFA6EFA6FFADA-FAFFFB07-FB12FB18-FB1CFB37FB3DFB3FFB42FB45FBB2-FBD2FD40-FD4FFD90FD91FDC8-FDEFFDFEFDFFFE1A-FE1FFE27-FE2FFE53FE67FE6C-FE6FFE75FEFDFEFEFF00FFBF-FFC1FFC8FFC9FFD0FFD1FFD8FFD9FFDD-FFDFFFE7FFEF-FFF8FFFEFFFF"
-});
-
-function addUnicodePackage (pack) {
- var codePoint = /\w{4}/g;
- for (var name in pack)
- exports.packages[name] = pack[name].replace(codePoint, "\\u$&");
-};
-
-});/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/document', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/event_emitter', 'ace/range', 'ace/anchor'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-var Range = require("ace/range").Range;
-var Anchor = require("ace/anchor").Anchor;
-
-var Document = function(text) {
- this.$lines = [];
-
- if (Array.isArray(text)) {
- this.insertLines(0, text);
- }
- // There has to be one line at least in the document. If you pass an empty
- // string to the insert function, nothing will happen. Workaround.
- else if (text.length == 0) {
- this.$lines = [""];
- } else {
- this.insert({row: 0, column:0}, text);
- }
-};
-
-(function() {
-
- oop.implement(this, EventEmitter);
-
- this.setValue = function(text) {
- var len = this.getLength();
- this.remove(new Range(0, 0, len, this.getLine(len-1).length));
- this.insert({row: 0, column:0}, text);
- };
-
- this.getValue = function() {
- return this.getAllLines().join(this.getNewLineCharacter());
- };
-
- this.createAnchor = function(row, column) {
- return new Anchor(this, row, column);
- };
-
- // check for IE split bug
- if ("aaa".split(/a/).length == 0)
- this.$split = function(text) {
- return text.replace(/\r\n|\r/g, "\n").split("\n");
- }
- else
- this.$split = function(text) {
- return text.split(/\r\n|\r|\n/);
- };
-
-
- this.$detectNewLine = function(text) {
- var match = text.match(/^.*?(\r?\n)/m);
- if (match) {
- this.$autoNewLine = match[1];
- } else {
- this.$autoNewLine = "\n";
- }
- };
-
- this.getNewLineCharacter = function() {
- switch (this.$newLineMode) {
- case "windows":
- return "\r\n";
-
- case "unix":
- return "\n";
-
- case "auto":
- return this.$autoNewLine;
- }
- },
-
- this.$autoNewLine = "\n";
- this.$newLineMode = "auto";
- this.setNewLineMode = function(newLineMode) {
- if (this.$newLineMode === newLineMode) return;
-
- this.$newLineMode = newLineMode;
- };
-
- this.getNewLineMode = function() {
- return this.$newLineMode;
- };
-
- this.isNewLine = function(text) {
- return (text == "\r\n" || text == "\r" || text == "\n");
- };
-
- /**
- * Get a verbatim copy of the given line as it is in the document
- */
- this.getLine = function(row) {
- return this.$lines[row] || "";
- };
-
- this.getLines = function(firstRow, lastRow) {
- return this.$lines.slice(firstRow, lastRow + 1);
- };
-
- /**
- * Returns all lines in the document as string array. Warning: The caller
- * should not modify this array!
- */
- this.getAllLines = function() {
- return this.getLines(0, this.getLength());
- };
-
- this.getLength = function() {
- return this.$lines.length;
- };
-
- this.getTextRange = function(range) {
- if (range.start.row == range.end.row) {
- return this.$lines[range.start.row].substring(range.start.column,
- range.end.column);
- }
- else {
- var lines = [];
- lines.push(this.$lines[range.start.row].substring(range.start.column));
- lines.push.apply(lines, this.getLines(range.start.row+1, range.end.row-1));
- lines.push(this.$lines[range.end.row].substring(0, range.end.column));
- return lines.join(this.getNewLineCharacter());
- }
- };
-
- this.$clipPosition = function(position) {
- var length = this.getLength();
- if (position.row >= length) {
- position.row = Math.max(0, length - 1);
- position.column = this.getLine(length-1).length;
- }
- return position;
- }
-
- this.insert = function(position, text) {
- if (text.length == 0)
- return position;
-
- position = this.$clipPosition(position);
-
- if (this.getLength() <= 1)
- this.$detectNewLine(text);
-
- var lines = this.$split(text);
- var firstLine = lines.splice(0, 1)[0];
- var lastLine = lines.length == 0 ? null : lines.splice(lines.length - 1, 1)[0];
-
- position = this.insertInLine(position, firstLine);
- if (lastLine !== null) {
- position = this.insertNewLine(position); // terminate first line
- position = this.insertLines(position.row, lines);
- position = this.insertInLine(position, lastLine || "");
- }
- return position;
- };
-
- this.insertLines = function(row, lines) {
- if (lines.length == 0)
- return {row: row, column: 0};
-
- var args = [row, 0];
- args.push.apply(args, lines);
- this.$lines.splice.apply(this.$lines, args);
-
- var range = new Range(row, 0, row + lines.length, 0);
- var delta = {
- action: "insertLines",
- range: range,
- lines: lines
- };
- this._dispatchEvent("change", { data: delta });
- return range.end;
- },
-
- this.insertNewLine = function(position) {
- position = this.$clipPosition(position);
- var line = this.$lines[position.row] || "";
-
- this.$lines[position.row] = line.substring(0, position.column);
- this.$lines.splice(position.row + 1, 0, line.substring(position.column, line.length));
-
- var end = {
- row : position.row + 1,
- column : 0
- };
-
- var delta = {
- action: "insertText",
- range: Range.fromPoints(position, end),
- text: this.getNewLineCharacter()
- };
- this._dispatchEvent("change", { data: delta });
-
- return end;
- };
-
- this.insertInLine = function(position, text) {
- if (text.length == 0)
- return position;
-
- var line = this.$lines[position.row] || "";
-
- this.$lines[position.row] = line.substring(0, position.column) + text
- + line.substring(position.column);
-
- var end = {
- row : position.row,
- column : position.column + text.length
- };
-
- var delta = {
- action: "insertText",
- range: Range.fromPoints(position, end),
- text: text
- };
- this._dispatchEvent("change", { data: delta });
-
- return end;
- };
-
- this.remove = function(range) {
- // clip to document
- range.start = this.$clipPosition(range.start);
- range.end = this.$clipPosition(range.end);
-
- if (range.isEmpty())
- return range.start;
-
- var firstRow = range.start.row;
- var lastRow = range.end.row;
-
- if (range.isMultiLine()) {
- var firstFullRow = range.start.column == 0 ? firstRow : firstRow + 1;
- var lastFullRow = lastRow - 1;
-
- if (range.end.column > 0)
- this.removeInLine(lastRow, 0, range.end.column);
-
- if (lastFullRow >= firstFullRow)
- this.removeLines(firstFullRow, lastFullRow);
-
- if (firstFullRow != firstRow) {
- this.removeInLine(firstRow, range.start.column, this.getLine(firstRow).length);
- this.removeNewLine(range.start.row);
- }
- }
- else {
- this.removeInLine(firstRow, range.start.column, range.end.column);
- }
- return range.start;
- };
-
- this.removeInLine = function(row, startColumn, endColumn) {
- if (startColumn == endColumn)
- return;
-
- var range = new Range(row, startColumn, row, endColumn);
- var line = this.getLine(row);
- var removed = line.substring(startColumn, endColumn);
- var newLine = line.substring(0, startColumn) + line.substring(endColumn, line.length);
- this.$lines.splice(row, 1, newLine);
-
- var delta = {
- action: "removeText",
- range: range,
- text: removed
- };
- this._dispatchEvent("change", { data: delta });
- return range.start;
- };
-
- /**
- * Removes a range of full lines
- *
- * @param firstRow {Integer} The first row to be removed
- * @param lastRow {Integer} The last row to be removed
- * @return {String[]} The removed lines
- */
- this.removeLines = function(firstRow, lastRow) {
- var range = new Range(firstRow, 0, lastRow + 1, 0);
- var removed = this.$lines.splice(firstRow, lastRow - firstRow + 1);
-
- var delta = {
- action: "removeLines",
- range: range,
- nl: this.getNewLineCharacter(),
- lines: removed
- };
- this._dispatchEvent("change", { data: delta });
- return removed;
- };
-
- this.removeNewLine = function(row) {
- var firstLine = this.getLine(row);
- var secondLine = this.getLine(row+1);
-
- var range = new Range(row, firstLine.length, row+1, 0);
- var line = firstLine + secondLine;
-
- this.$lines.splice(row, 2, line);
-
- var delta = {
- action: "removeText",
- range: range,
- text: this.getNewLineCharacter()
- };
- this._dispatchEvent("change", { data: delta });
- };
-
- this.replace = function(range, text) {
- if (text.length == 0 && range.isEmpty())
- return range.start;
-
- // Shortcut: If the text we want to insert is the same as it is already
- // in the document, we don't have to replace anything.
- if (text == this.getTextRange(range))
- return range.end;
-
- this.remove(range);
- if (text) {
- var end = this.insert(range.start, text);
- }
- else {
- end = range.start;
- }
-
- return end;
- };
-
- this.applyDeltas = function(deltas) {
- for (var i=0; i<deltas.length; i++) {
- var delta = deltas[i];
- var range = Range.fromPoints(delta.range.start, delta.range.end);
-
- if (delta.action == "insertLines")
- this.insertLines(range.start.row, delta.lines)
- else if (delta.action == "insertText")
- this.insert(range.start, delta.text)
- else if (delta.action == "removeLines")
- this.removeLines(range.start.row, range.end.row - 1)
- else if (delta.action == "removeText")
- this.remove(range)
- }
- };
-
- this.revertDeltas = function(deltas) {
- for (var i=deltas.length-1; i>=0; i--) {
- var delta = deltas[i];
-
- var range = Range.fromPoints(delta.range.start, delta.range.end);
-
- if (delta.action == "insertLines")
- this.removeLines(range.start.row, range.end.row - 1)
- else if (delta.action == "insertText")
- this.remove(range)
- else if (delta.action == "removeLines")
- this.insertLines(range.start.row, delta.lines)
- else if (delta.action == "removeText")
- this.insert(range.start, delta.text)
- }
- };
-
-}).call(Document.prototype);
-
-exports.Document = Document;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/anchor', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/event_emitter'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-
-/**
- * An Anchor is a floating pointer in the document. Whenever text is inserted or
- * deleted before the cursor, the position of the cursor is updated
- */
-var Anchor = exports.Anchor = function(doc, row, column) {
- this.document = doc;
-
- if (typeof column == "undefined")
- this.setPosition(row.row, row.column);
- else
- this.setPosition(row, column);
-
- this.$onChange = this.onChange.bind(this);
- doc.on("change", this.$onChange);
-};
-
-(function() {
-
- oop.implement(this, EventEmitter);
-
- this.getPosition = function() {
- return this.$clipPositionToDocument(this.row, this.column);
- };
-
- this.getDocument = function() {
- return this.document;
- };
-
- this.onChange = function(e) {
- var delta = e.data;
- var range = delta.range;
-
- if (range.start.row == range.end.row && range.start.row != this.row)
- return;
-
- if (range.start.row > this.row)
- return;
-
- if (range.start.row == this.row && range.start.column > this.column)
- return;
-
- var row = this.row;
- var column = this.column;
-
- if (delta.action === "insertText") {
- if (range.start.row === row && range.start.column <= column) {
- if (range.start.row === range.end.row) {
- column += range.end.column - range.start.column;
- }
- else {
- column -= range.start.column;
- row += range.end.row - range.start.row;
- }
- }
- else if (range.start.row !== range.end.row && range.start.row < row) {
- row += range.end.row - range.start.row;
- }
- } else if (delta.action === "insertLines") {
- if (range.start.row <= row) {
- row += range.end.row - range.start.row;
- }
- }
- else if (delta.action == "removeText") {
- if (range.start.row == row && range.start.column < column) {
- if (range.end.column >= column)
- column = range.start.column;
- else
- column = Math.max(0, column - (range.end.column - range.start.column));
-
- } else if (range.start.row !== range.end.row && range.start.row < row) {
- if (range.end.row == row) {
- column = Math.max(0, column - range.end.column) + range.start.column;
- }
- row -= (range.end.row - range.start.row);
- }
- else if (range.end.row == row) {
- row -= range.end.row - range.start.row;
- column = Math.max(0, column - range.end.column) + range.start.column;
- }
- } else if (delta.action == "removeLines") {
- if (range.start.row <= row) {
- if (range.end.row <= row)
- row -= range.end.row - range.start.row;
- else {
- row = range.start.row;
- column = 0;
- }
- }
- }
-
- this.setPosition(row, column, true);
- };
-
- this.setPosition = function(row, column, noClip) {
- var pos;
- if (noClip) {
- pos = {
- row: row,
- column: column
- };
- }
- else {
- pos = this.$clipPositionToDocument(row, column);
- }
-
- if (this.row == pos.row && this.column == pos.column)
- return;
-
- var old = {
- row: this.row,
- column: this.column
- };
-
- this.row = pos.row;
- this.column = pos.column;
- this._dispatchEvent("change", {
- old: old,
- value: pos
- });
- };
-
- this.detach = function() {
- this.document.removeEventListener("change", this.$onChange);
- };
-
- this.$clipPositionToDocument = function(row, column) {
- var pos = {};
-
- if (row >= this.document.getLength()) {
- pos.row = Math.max(0, this.document.getLength() - 1);
- pos.column = this.document.getLine(pos.row).length;
- }
- else if (row < 0) {
- pos.row = 0;
- pos.column = 0;
- }
- else {
- pos.row = row;
- pos.column = Math.min(this.document.getLine(pos.row).length, Math.max(0, column));
- }
-
- if (column < 0)
- pos.column = 0;
-
- return pos;
- };
-
-}).call(Anchor.prototype);
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/background_tokenizer', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/event_emitter'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-
-var BackgroundTokenizer = function(tokenizer, editor) {
- this.running = false;
- this.lines = [];
- this.currentLine = 0;
- this.tokenizer = tokenizer;
-
- var self = this;
-
- this.$worker = function() {
- if (!self.running) { return; }
-
- var workerStart = new Date();
- var startLine = self.currentLine;
- var doc = self.doc;
-
- var processedLines = 0;
-
- var len = doc.getLength();
- while (self.currentLine < len) {
- self.lines[self.currentLine] = self.$tokenizeRows(self.currentLine, self.currentLine)[0];
- self.currentLine++;
-
- // only check every 5 lines
- processedLines += 1;
- if ((processedLines % 5 == 0) && (new Date() - workerStart) > 20) {
- self.fireUpdateEvent(startLine, self.currentLine-1);
- self.running = setTimeout(self.$worker, 20);
- return;
- }
- }
-
- self.running = false;
-
- self.fireUpdateEvent(startLine, len - 1);
- };
-};
-
-(function(){
-
- oop.implement(this, EventEmitter);
-
- this.setTokenizer = function(tokenizer) {
- this.tokenizer = tokenizer;
- this.lines = [];
-
- this.start(0);
- };
-
- this.setDocument = function(doc) {
- this.doc = doc;
- this.lines = [];
-
- this.stop();
- };
-
- this.fireUpdateEvent = function(firstRow, lastRow) {
- var data = {
- first: firstRow,
- last: lastRow
- };
- this._dispatchEvent("update", {data: data});
- };
-
- this.start = function(startRow) {
- this.currentLine = Math.min(startRow || 0, this.currentLine,
- this.doc.getLength());
-
- // remove all cached items below this line
- this.lines.splice(this.currentLine, this.lines.length);
-
- this.stop();
- // pretty long delay to prevent the tokenizer from interfering with the user
- this.running = setTimeout(this.$worker, 700);
- };
-
- this.stop = function() {
- if (this.running)
- clearTimeout(this.running);
- this.running = false;
- };
-
- this.getTokens = function(firstRow, lastRow) {
- return this.$tokenizeRows(firstRow, lastRow);
- };
-
- this.getState = function(row) {
- return this.$tokenizeRows(row, row)[0].state;
- };
-
- this.$tokenizeRows = function(firstRow, lastRow) {
- if (!this.doc)
- return [];
-
- var rows = [];
-
- // determine start state
- var state = "start";
- var doCache = false;
- if (firstRow > 0 && this.lines[firstRow - 1]) {
- state = this.lines[firstRow - 1].state;
- doCache = true;
- } else if (firstRow == 0) {
- state = "start";
- doCache = true;
- } else if (this.lines.length > 0) {
- // Guess that we haven't changed state.
- state = this.lines[this.lines.length-1].state;
- }
-
- var lines = this.doc.getLines(firstRow, lastRow);
- for (var row=firstRow; row<=lastRow; row++) {
- if (!this.lines[row]) {
- var tokens = this.tokenizer.getLineTokens(lines[row-firstRow] || "", state);
- var state = tokens.state;
- rows.push(tokens);
-
- if (doCache) {
- this.lines[row] = tokens;
- }
- }
- else {
- var tokens = this.lines[row];
- state = tokens.state;
- rows.push(tokens);
- }
- }
- return rows;
- };
-
-}).call(BackgroundTokenizer.prototype);
-
-exports.BackgroundTokenizer = BackgroundTokenizer;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Julian Viereck <julian DOT viereck AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/edit_session/folding', ['require', 'exports', 'module' , 'ace/range', 'ace/edit_session/fold_line', 'ace/edit_session/fold'], function(require, exports, module) {
-
-var Range = require("ace/range").Range;
-var FoldLine = require("ace/edit_session/fold_line").FoldLine;
-var Fold = require("ace/edit_session/fold").Fold;
-
-function Folding() {
- /**
- * Looks up a fold at a given row/column. Possible values for side:
- * -1: ignore a fold if fold.start = row/column
- * +1: ignore a fold if fold.end = row/column
- */
- this.getFoldAt = function(row, column, side) {
- var foldLine = this.getFoldLine(row);
- if (!foldLine)
- return null;
-
- var folds = foldLine.folds;
- for (var i = 0; i < folds.length; i++) {
- var fold = folds[i];
- if (fold.range.contains(row, column)) {
- if (side == 1 && fold.range.isEnd(row, column)) {
- continue;
- } else if (side == -1 && fold.range.isStart(row, column)) {
- continue;
- }
- return fold;
- }
- }
- };
-
- /**
- * Returns all folds in the given range. Note, that this will return folds
- *
- */
- this.getFoldsInRange = function(range) {
- range = range.clone();
- var start = range.start;
- var end = range.end;
- var foldLines = this.$foldData;
- var foundFolds = [];
-
- start.column += 1;
- end.column -= 1;
-
- for (var i = 0; i < foldLines.length; i++) {
- var cmp = foldLines[i].range.compareRange(range);
- if (cmp == 2) {
- // Range is before foldLine. No intersection. This means,
- // there might be other foldLines that intersect.
- continue;
- }
- else if (cmp == -2) {
- // Range is after foldLine. There can't be any other foldLines then,
- // so let's give up.
- break;
- }
-
- var folds = foldLines[i].folds;
- for (var j = 0; j < folds.length; j++) {
- var fold = folds[j];
- cmp = fold.range.compareRange(range);
- if (cmp == -2) {
- break;
- } else if (cmp == 2) {
- continue;
- } else
- // WTF-state: Can happen due to -1/+1 to start/end column.
- if (cmp == 42) {
- break;
- }
- foundFolds.push(fold);
- }
- }
- return foundFolds;
- }
-
- /**
- * Returns the string between folds at the given position.
- * E.g.
- * foo<fold>b|ar<fold>wolrd -> "bar"
- * foo<fold>bar<fold>wol|rd -> "world"
- * foo<fold>bar<fo|ld>wolrd -> <null>
- *
- * where | means the position of row/column
- *
- * The trim option determs if the return string should be trimed according
- * to the "side" passed with the trim value:
- *
- * E.g.
- * foo<fold>b|ar<fold>wolrd -trim=-1> "b"
- * foo<fold>bar<fold>wol|rd -trim=+1> "rld"
- * fo|o<fold>bar<fold>wolrd -trim=00> "foo"
- */
- this.getFoldStringAt = function(row, column, trim, foldLine) {
- var foldLine = foldLine || this.getFoldLine(row);
- if (!foldLine)
- return null;
-
- var lastFold = {
- end: { column: 0 }
- };
- // TODO: Refactor to use getNextFoldTo function.
- for (var i = 0; i < foldLine.folds.length; i++) {
- var fold = foldLine.folds[i];
- var cmp = fold.range.compareEnd(row, column);
- if (cmp == -1) {
- var str = this
- .getLine(fold.start.row)
- .substring(lastFold.end.column, fold.start.column);
- break;
- }
- else if (cmp == 0) {
- return null;
- }
- lastFold = fold;
- }
- if (!str)
- str = this.getLine(fold.start.row).substring(lastFold.end.column);
-
- if (trim == -1)
- return str.substring(0, column - lastFold.end.column);
- else if (trim == 1)
- return str.substring(column - lastFold.end.column)
- else
- return str;
- }
-
- this.getFoldLine = function(docRow, startFoldLine) {
- var foldData = this.$foldData;
- var i = 0;
- if (startFoldLine)
- i = foldData.indexOf(startFoldLine);
- if (i == -1)
- i = 0;
- for (i; i < foldData.length; i++) {
- var foldLine = foldData[i];
- if (foldLine.start.row <= docRow && foldLine.end.row >= docRow) {
- return foldLine;
- } else if (foldLine.end.row > docRow) {
- return null;
- }
- }
- return null;
- }
-
- // returns the fold which starts after or contains docRow
- this.getNextFold = function(docRow, startFoldLine) {
- var foldData = this.$foldData, ans;
- var i = 0;
- if (startFoldLine)
- i = foldData.indexOf(startFoldLine);
- if (i == -1)
- i = 0;
- for (i; i < foldData.length; i++) {
- var foldLine = foldData[i];
- if (foldLine.end.row >= docRow) {
- return foldLine;
- }
- }
- return null;
- }
-
- this.getFoldedRowCount = function(first, last) {
- var foldData = this.$foldData, rowCount = last-first+1;
- for (var i = 0; i < foldData.length; i++) {
- var foldLine = foldData[i],
- end = foldLine.end.row,
- start = foldLine.start.row;
- if (end >= last) {
- if(start < last) {
- if(start >= first)
- rowCount -= last-start;
- else
- rowCount = 0;//in one fold
- }
- break;
- } else if(end >= first){
- if (start >= first) //fold inside range
- rowCount -= end-start;
- else
- rowCount -= end-first+1;
- }
- }
- return rowCount;
- }
-
- this.$addFoldLine = function(foldLine) {
- this.$foldData.push(foldLine);
- this.$foldData.sort(function(a, b) {
- return a.start.row - b.start.row;
- });
- return foldLine;
- }
-
- /**
- * Adds a new fold.
- *
- * @returns
- * The new created Fold object or an existing fold object in case the
- * passed in range fits an existing fold exactly.
- */
- this.addFold = function(placeholder, range) {
- var foldData = this.$foldData;
- var added = false;
-
- if (placeholder instanceof Fold)
- var fold = placeholder;
- else
- fold = new Fold(range, placeholder);
-
- var startRow = fold.start.row;
- var startColumn = fold.start.column;
- var endRow = fold.end.row;
- var endColumn = fold.end.column;
-
- // --- Some checking ---
- if (fold.placeholder.length < 2)
- throw "Placeholder has to be at least 2 characters";
-
- if (startRow == endRow && endColumn - startColumn < 2)
- throw "The range has to be at least 2 characters width";
-
- var existingFold = this.getFoldAt(startRow, startColumn, 1);
- if (
- existingFold
- && existingFold.range.isEnd(endRow, endColumn)
- && existingFold.range.isStart(startRow, startColumn)
- ) {
- return fold;
- }
-
- existingFold = this.getFoldAt(startRow, startColumn, 1);
- if (existingFold && !existingFold.range.isStart(startRow, startColumn))
- throw "A fold can't start inside of an already existing fold";
-
- existingFold = this.getFoldAt(endRow, endColumn, -1);
- if (existingFold && !existingFold.range.isEnd(endRow, endColumn))
- throw "A fold can't end inside of an already existing fold";
-
- if (endRow >= this.doc.getLength())
- throw "End of fold is outside of the document.";
-
- if (endColumn > this.getLine(endRow).length || startColumn > this.getLine(startRow).length)
- throw "End of fold is outside of the document.";
-
- // Check if there are folds in the range we create the new fold for.
- var folds = this.getFoldsInRange(fold.range);
- if (folds.length > 0) {
- // Remove the folds from fold data.
- this.removeFolds(folds);
- // Add the removed folds as subfolds on the new fold.
- fold.subFolds = folds;
- }
-
- for (var i = 0; i < foldData.length; i++) {
- var foldLine = foldData[i];
- if (endRow == foldLine.start.row) {
- foldLine.addFold(fold);
- added = true;
- break;
- }
- else if (startRow == foldLine.end.row) {
- foldLine.addFold(fold);
- added = true;
- if (!fold.sameRow) {
- // Check if we might have to merge two FoldLines.
- foldLineNext = foldData[i + 1];
- if (foldLineNext && foldLineNext.start.row == endRow) {
- // We need to merge!
- foldLine.merge(foldLineNext);
- break;
- }
- }
- break;
- }
- else if (endRow <= foldLine.start.row) {
- break;
- }
- }
-
- if (!added)
- foldLine = this.$addFoldLine(new FoldLine(this.$foldData, fold));
-
- if (this.$useWrapMode)
- this.$updateWrapData(foldLine.start.row, foldLine.start.row);
-
- // Notify that fold data has changed.
- this.$modified = true;
- this._dispatchEvent("changeFold", { data: fold });
-
- return fold;
- };
-
- this.addFolds = function(folds) {
- folds.forEach(function(fold) {
- this.addFold(fold);
- }, this);
- };
-
- this.removeFold = function(fold) {
- var foldLine = fold.foldLine;
- var startRow = foldLine.start.row;
- var endRow = foldLine.end.row;
-
- var foldLines = this.$foldData,
- folds = foldLine.folds;
- // Simple case where there is only one fold in the FoldLine such that
- // the entire fold line can get removed directly.
- if (folds.length == 1) {
- foldLines.splice(foldLines.indexOf(foldLine), 1);
- } else
- // If the fold is the last fold of the foldLine, just remove it.
- if (foldLine.range.isEnd(fold.end.row, fold.end.column)) {
- folds.pop();
- foldLine.end.row = folds[folds.length - 1].end.row;
- foldLine.end.column = folds[folds.length - 1].end.column;
- } else
- // If the fold is the first fold of the foldLine, just remove it.
- if (foldLine.range.isStart(fold.start.row, fold.start.column)) {
- folds.shift();
- foldLine.start.row = folds[0].start.row;
- foldLine.start.column = folds[0].start.column;
- } else
- // We know there are more then 2 folds and the fold is not at the edge.
- // This means, the fold is somewhere in between.
- //
- // If the fold is in one row, we just can remove it.
- if (fold.sameRow) {
- folds.splice(folds.indexOf(fold), 1);
- } else
- // The fold goes over more then one row. This means remvoing this fold
- // will cause the fold line to get splitted up.
- {
- var newFoldLine = foldLine.split(fold.start.row, fold.start.column);
- newFoldLine.folds.shift();
- foldLine.start.row = folds[0].start.row;
- foldLine.start.column = folds[0].start.column;
- this.$addFoldLine(newFoldLine);
- }
-
- if (this.$useWrapMode) {
- this.$updateWrapData(startRow, endRow);
- }
-
- // Notify that fold data has changed.
- this.$modified = true;
- this._dispatchEvent("changeFold", { data: fold });
- }
-
- this.removeFolds = function(folds) {
- // We need to clone the folds array passed in as it might be the folds
- // array of a fold line and as we call this.removeFold(fold), folds
- // are removed from folds and changes the current index.
- var cloneFolds = [];
- for (var i = 0; i < folds.length; i++) {
- cloneFolds.push(folds[i]);
- }
-
- cloneFolds.forEach(function(fold) {
- this.removeFold(fold);
- }, this);
- this.$modified = true;
- }
-
- this.expandFold = function(fold) {
- this.removeFold(fold);
- fold.subFolds.forEach(function(fold) {
- this.addFold(fold);
- }, this);
- fold.subFolds = [];
- }
-
- this.expandFolds = function(folds) {
- folds.forEach(function(fold) {
- this.expandFold(fold);
- }, this);
- }
-
- /**
- * Checks if a given documentRow is folded. This is true if there are some
- * folded parts such that some parts of the line is still visible.
- **/
- this.isRowFolded = function(docRow, startFoldRow) {
- return !!this.getFoldLine(docRow, startFoldRow);
- };
-
- this.getRowFoldEnd = function(docRow, startFoldRow) {
- var foldLine = this.getFoldLine(docRow, startFoldRow);
- return (foldLine
- ? foldLine.end.row
- : docRow)
- };
-
- this.getFoldDisplayLine = function(foldLine, endRow, endColumn, startRow, startColumn) {
- if (startRow == null) {
- startRow = foldLine.start.row;
- startColumn = 0;
- }
-
- if (endRow == null) {
- endRow = foldLine.end.row;
- endColumn = this.getLine(endRow).length;
- }
-
- // Build the textline using the FoldLine walker.
- var line = "";
- var doc = this.doc;
- var textLine = "";
-
- foldLine.walk(function(placeholder, row, column, lastColumn, isNewRow) {
- if (row < startRow) {
- return;
- } else if (row == startRow) {
- if (column < startColumn) {
- return;
- }
- lastColumn = Math.max(startColumn, lastColumn);
- }
- if (placeholder) {
- textLine += placeholder;
- } else {
- textLine += doc.getLine(row).substring(lastColumn, column);
- }
- }.bind(this), endRow, endColumn);
- return textLine;
- };
-
- this.getDisplayLine = function(row, endColumn, startRow, startColumn) {
- var foldLine = this.getFoldLine(row);
-
- if (!foldLine) {
- var line;
- line = this.doc.getLine(row);
- return line.substring(startColumn || 0, endColumn || line.length);
- } else {
- return this.getFoldDisplayLine(
- foldLine, row, endColumn, startRow, startColumn);
- }
- };
-
- this.$cloneFoldData = function() {
- var foldData = this.$foldData;
- var fd = [];
- fd = this.$foldData.map(function(foldLine) {
- var folds = foldLine.folds.map(function(fold) {
- return fold.clone();
- });
- return new FoldLine(fd, folds);
- });
-
- return fd;
- };
-}
-
-exports.Folding = Folding;
-
-});/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Julian Viereck <julian DOT viereck AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/edit_session/fold_line', ['require', 'exports', 'module' , 'ace/range'], function(require, exports, module) {
-
-var Range = require("ace/range").Range;
-
-/**
- * If the an array is passed in, the folds are expected to be sorted already.
- */
-function FoldLine(foldData, folds) {
- this.foldData = foldData;
- if (Array.isArray(folds)) {
- this.folds = folds;
- } else {
- folds = this.folds = [ folds ];
- }
-
- var last = folds[folds.length - 1]
- this.range = new Range(folds[0].start.row, folds[0].start.column,
- last.end.row, last.end.column);
- this.start = this.range.start;
- this.end = this.range.end;
-
- this.folds.forEach(function(fold) {
- fold.setFoldLine(this);
- }, this);
-}
-
-(function() {
- /**
- * Note: This doesn't update wrapData!
- */
- this.shiftRow = function(shift) {
- this.start.row += shift;
- this.end.row += shift;
- this.folds.forEach(function(fold) {
- fold.start.row += shift;
- fold.end.row += shift;
- });
- }
-
- this.addFold = function(fold) {
- if (fold.sameRow) {
- if (fold.start.row < this.startRow || fold.endRow > this.endRow) {
- throw "Can't add a fold to this FoldLine as it has no connection";
- }
- this.folds.push(fold);
- this.folds.sort(function(a, b) {
- return -a.range.compareEnd(b.start.row, b.start.column);
- });
- if (this.range.compareEnd(fold.start.row, fold.start.column) > 0) {
- this.end.row = fold.end.row;
- this.end.column = fold.end.column;
- } else if (this.range.compareStart(fold.end.row, fold.end.column) < 0) {
- this.start.row = fold.start.row;
- this.start.column = fold.start.column;
- }
- } else if (fold.start.row == this.end.row) {
- this.folds.push(fold);
- this.end.row = fold.end.row;
- this.end.column = fold.end.column;
- } else if (fold.end.row == this.start.row) {
- this.folds.unshift(fold);
- this.start.row = fold.start.row;
- this.start.column = fold.start.column;
- } else {
- throw "Trying to add fold to FoldRow that doesn't have a matching row";
- }
- fold.foldLine = this;
- }
-
- this.containsRow = function(row) {
- return row >= this.start.row && row <= this.end.row;
- }
-
- this.walk = function(callback, endRow, endColumn) {
- var lastEnd = 0,
- folds = this.folds,
- fold,
- comp, stop, isNewRow = true;
-
- if (endRow == null) {
- endRow = this.end.row;
- endColumn = this.end.column;
- }
-
- for (var i = 0; i < folds.length; i++) {
- fold = folds[i];
-
- comp = fold.range.compareStart(endRow, endColumn);
- // This fold is after the endRow/Column.
- if (comp == -1) {
- callback(null, endRow, endColumn, lastEnd, isNewRow);
- return;
- }
-
- stop = callback(null, fold.start.row, fold.start.column, lastEnd, isNewRow);
- stop = !stop && callback(fold.placeholder, fold.start.row, fold.start.column, lastEnd);
-
- // If the user requested to stop the walk or endRow/endColumn is
- // inside of this fold (comp == 0), then end here.
- if (stop || comp == 0) {
- return;
- }
-
- // Note the new lastEnd might not be on the same line. However,
- // it's the callback's job to recognize this.
- isNewRow = !fold.sameRow;
- lastEnd = fold.end.column;
- }
- callback(null, endRow, endColumn, lastEnd, isNewRow);
- }
-
- this.getNextFoldTo = function(row, column) {
- var fold, cmp;
- for (var i = 0; i < this.folds.length; i++) {
- fold = this.folds[i];
- cmp = fold.range.compareEnd(row, column);
- if (cmp == -1) {
- return {
- fold: fold,
- kind: "after"
- };
- } else if (cmp == 0) {
- return {
- fold: fold,
- kind: "inside"
- }
- }
- }
- return null;
- }
-
- this.addRemoveChars = function(row, column, len) {
- var ret = this.getNextFoldTo(row, column),
- fold, folds;
- if (ret) {
- fold = ret.fold;
- if (ret.kind == "inside"
- && fold.start.column != column
- && fold.start.row != row)
- {
- throw "Moving characters inside of a fold should never be reached";
- } else if (fold.start.row == row) {
- folds = this.folds;
- var i = folds.indexOf(fold);
- if (i == 0) {
- this.start.column += len;
- }
- for (i; i < folds.length; i++) {
- fold = folds[i];
- fold.start.column += len;
- if (!fold.sameRow) {
- return;
- }
- fold.end.column += len;
- }
- this.end.column += len;
- }
- }
- }
-
- this.split = function(row, column) {
- var fold = this.getNextFoldTo(row, column).fold,
- folds = this.folds;
- var foldData = this.foldData;
-
- if (!fold) {
- return null;
- }
- var i = folds.indexOf(fold);
- var foldBefore = folds[i - 1];
- this.end.row = foldBefore.end.row;
- this.end.column = foldBefore.end.column;
-
- // Remove the folds after row/column and create a new FoldLine
- // containing these removed folds.
- folds = folds.splice(i, folds.length - i);
-
- var newFoldLine = new FoldLine(foldData, folds);
- foldData.splice(foldData.indexOf(this) + 1, 0, newFoldLine);
- return newFoldLine;
- }
-
- this.merge = function(foldLineNext) {
- var folds = foldLineNext.folds;
- for (var i = 0; i < folds.length; i++) {
- this.addFold(folds[i]);
- }
- // Remove the foldLineNext - no longer needed, as
- // it's merged now with foldLineNext.
- var foldData = this.foldData;
- foldData.splice(foldData.indexOf(foldLineNext), 1);
- }
-
- this.toString = function() {
- var ret = [this.range.toString() + ": [" ];
-
- this.folds.forEach(function(fold) {
- ret.push(" " + fold.toString());
- });
- ret.push("]")
- return ret.join("\n");
- }
-
- this.idxToPosition = function(idx) {
- var lastFoldEndColumn = 0;
- var fold;
-
- for (var i = 0; i < this.folds.length; i++) {
- var fold = this.folds[i];
-
- idx -= fold.start.column - lastFoldEndColumn;
- if (idx < 0) {
- return {
- row: fold.start.row,
- column: fold.start.column + idx
- };
- }
-
- idx -= fold.placeholder.length;
- if (idx < 0) {
- return fold.start;
- }
-
- lastFoldEndColumn = fold.end.column;
- }
-
- return {
- row: this.end.row,
- column: this.end.column + idx
- };
- }
-}).call(FoldLine.prototype);
-
-exports.FoldLine = FoldLine;
-});/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Julian Viereck <julian DOT viereck AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/edit_session/fold', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-/**
- * Simple fold-data struct.
- **/
-var Fold = exports.Fold = function(range, placeholder) {
- this.foldLine = null;
- this.placeholder = placeholder;
- this.range = range;
- this.start = range.start;
- this.end = range.end;
-
- this.sameRow = range.start.row == range.end.row;
- this.subFolds = [];
-};
-
-(function() {
-
- this.toString = function() {
- return '"' + this.placeholder + '" ' + this.range.toString();
- };
-
- this.setFoldLine = function(foldLine) {
- this.foldLine = foldLine;
- this.subFolds.forEach(function(fold) {
- fold.setFoldLine(foldLine);
- });
- };
-
- this.clone = function() {
- var range = this.range.clone();
- var fold = new Fold(range, this.placeholder);
- this.subFolds.forEach(function(subFold) {
- fold.subFolds.push(subFold.clone());
- });
- return fold;
- };
-
-}).call(Fold.prototype);
-
-});/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Mihai Sucan <mihai DOT sucan AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/search', ['require', 'exports', 'module' , 'pilot/lang', 'pilot/oop', 'ace/range'], function(require, exports, module) {
-
-var lang = require("pilot/lang");
-var oop = require("pilot/oop");
-var Range = require("ace/range").Range;
-
-var Search = function() {
- this.$options = {
- needle: "",
- backwards: false,
- wrap: false,
- caseSensitive: false,
- wholeWord: false,
- scope: Search.ALL,
- regExp: false
- };
-};
-
-Search.ALL = 1;
-Search.SELECTION = 2;
-
-(function() {
-
- this.set = function(options) {
- oop.mixin(this.$options, options);
- return this;
- };
-
- this.getOptions = function() {
- return lang.copyObject(this.$options);
- };
-
- this.find = function(session) {
- if (!this.$options.needle)
- return null;
-
- if (this.$options.backwards) {
- var iterator = this.$backwardMatchIterator(session);
- } else {
- iterator = this.$forwardMatchIterator(session);
- }
-
- var firstRange = null;
- iterator.forEach(function(range) {
- firstRange = range;
- return true;
- });
-
- return firstRange;
- };
-
- this.findAll = function(session) {
- if (!this.$options.needle)
- return [];
-
- if (this.$options.backwards) {
- var iterator = this.$backwardMatchIterator(session);
- } else {
- iterator = this.$forwardMatchIterator(session);
- }
-
- var ranges = [];
- iterator.forEach(function(range) {
- ranges.push(range);
- });
-
- return ranges;
- };
-
- this.replace = function(input, replacement) {
- var re = this.$assembleRegExp();
- var match = re.exec(input);
- if (match && match[0].length == input.length) {
- if (this.$options.regExp) {
- return input.replace(re, replacement);
- } else {
- return replacement;
- }
- } else {
- return null;
- }
- };
-
- this.$forwardMatchIterator = function(session) {
- var re = this.$assembleRegExp();
- var self = this;
-
- return {
- forEach: function(callback) {
- self.$forwardLineIterator(session).forEach(function(line, startIndex, row) {
- if (startIndex) {
- line = line.substring(startIndex);
- }
-
- var matches = [];
-
- line.replace(re, function(str) {
- var offset = arguments[arguments.length-2];
- matches.push({
- str: str,
- offset: startIndex + offset
- });
- return str;
- });
-
- for (var i=0; i<matches.length; i++) {
- var match = matches[i];
- var range = self.$rangeFromMatch(row, match.offset, match.str.length);
- if (callback(range))
- return true;
- }
-
- });
- }
- };
- };
-
- this.$backwardMatchIterator = function(session) {
- var re = this.$assembleRegExp();
- var self = this;
-
- return {
- forEach: function(callback) {
- self.$backwardLineIterator(session).forEach(function(line, startIndex, row) {
- if (startIndex) {
- line = line.substring(startIndex);
- }
-
- var matches = [];
-
- line.replace(re, function(str, offset) {
- matches.push({
- str: str,
- offset: startIndex + offset
- });
- return str;
- });
-
- for (var i=matches.length-1; i>= 0; i--) {
- var match = matches[i];
- var range = self.$rangeFromMatch(row, match.offset, match.str.length);
- if (callback(range))
- return true;
- }
- });
- }
- };
- };
-
- this.$rangeFromMatch = function(row, column, length) {
- return new Range(row, column, row, column+length);
- };
-
- this.$assembleRegExp = function() {
- if (this.$options.regExp) {
- var needle = this.$options.needle;
- } else {
- needle = lang.escapeRegExp(this.$options.needle);
- }
-
- if (this.$options.wholeWord) {
- needle = "\\b" + needle + "\\b";
- }
-
- var modifier = "g";
- if (!this.$options.caseSensitive) {
- modifier += "i";
- }
-
- var re = new RegExp(needle, modifier);
- return re;
- };
-
- this.$forwardLineIterator = function(session) {
- var searchSelection = this.$options.scope == Search.SELECTION;
-
- var range = session.getSelection().getRange();
- var start = session.getSelection().getCursor();
-
- var firstRow = searchSelection ? range.start.row : 0;
- var firstColumn = searchSelection ? range.start.column : 0;
- var lastRow = searchSelection ? range.end.row : session.getLength() - 1;
-
- var wrap = this.$options.wrap;
- var inWrap = false;
-
- function getLine(row) {
- var line = session.getLine(row);
- if (searchSelection && row == range.end.row) {
- line = line.substring(0, range.end.column);
- }
- if (inWrap && row == start.row) {
- line = line.substring(0, start.column);
- }
- return line;
- }
-
- return {
- forEach: function(callback) {
- var row = start.row;
-
- var line = getLine(row);
- var startIndex = start.column;
-
- var stop = false;
- inWrap = false;
-
- while (!callback(line, startIndex, row)) {
-
- if (stop) {
- return;
- }
-
- row++;
- startIndex = 0;
-
- if (row > lastRow) {
- if (wrap) {
- row = firstRow;
- startIndex = firstColumn;
- inWrap = true;
- } else {
- return;
- }
- }
-
- if (row == start.row)
- stop = true;
-
- line = getLine(row);
- }
- }
- };
- };
-
- this.$backwardLineIterator = function(session) {
- var searchSelection = this.$options.scope == Search.SELECTION;
-
- var range = session.getSelection().getRange();
- var start = searchSelection ? range.end : range.start;
-
- var firstRow = searchSelection ? range.start.row : 0;
- var firstColumn = searchSelection ? range.start.column : 0;
- var lastRow = searchSelection ? range.end.row : session.getLength() - 1;
-
- var wrap = this.$options.wrap;
-
- return {
- forEach : function(callback) {
- var row = start.row;
-
- var line = session.getLine(row).substring(0, start.column);
- var startIndex = 0;
- var stop = false;
- var inWrap = false;
-
- while (!callback(line, startIndex, row)) {
-
- if (stop)
- return;
-
- row--;
- startIndex = 0;
-
- if (row < firstRow) {
- if (wrap) {
- row = lastRow;
- inWrap = true;
- } else {
- return;
- }
- }
-
- if (row == start.row)
- stop = true;
-
- line = session.getLine(row);
- if (searchSelection) {
- if (row == firstRow)
- startIndex = firstColumn;
- else if (row == lastRow)
- line = line.substring(0, range.end.column);
- }
-
- if (inWrap && row == start.row)
- startIndex = start.column;
- }
- }
- };
- };
-
-}).call(Search.prototype);
-
-exports.Search = Search;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Mihai Sucan <mihai DOT sucan AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/undomanager', ['require', 'exports', 'module' ], function(require, exports, module) {
-
-var UndoManager = function() {
- this.reset();
-};
-
-(function() {
-
- this.execute = function(options) {
- var deltas = options.args[0];
- this.$doc = options.args[1];
- this.$undoStack.push(deltas);
- this.$redoStack = [];
- };
-
- this.undo = function(dontSelect) {
- var deltas = this.$undoStack.pop();
- var undoSelectionRange = null;
- if (deltas) {
- undoSelectionRange =
- this.$doc.undoChanges(deltas, dontSelect);
- this.$redoStack.push(deltas);
- }
- return undoSelectionRange;
- };
-
- this.redo = function(dontSelect) {
- var deltas = this.$redoStack.pop();
- var redoSelectionRange = null;
- if (deltas) {
- redoSelectionRange =
- this.$doc.redoChanges(deltas, dontSelect);
- this.$undoStack.push(deltas);
- }
- return redoSelectionRange;
- };
-
- this.reset = function() {
- this.$undoStack = [];
- this.$redoStack = [];
- };
-
- this.hasUndo = function() {
- return this.$undoStack.length > 0;
- };
-
- this.hasRedo = function() {
- return this.$redoStack.length > 0;
- };
-
-}).call(UndoManager.prototype);
-
-exports.UndoManager = UndoManager;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian@ajax.org>
- * Irakli Gozalishvili <rfobic@gmail.com> (http://jeditoolkit.com)
- * Julian Viereck <julian.viereck@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/virtual_renderer', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/dom', 'pilot/event', 'pilot/useragent', 'ace/layer/gutter', 'ace/layer/marker', 'ace/layer/text', 'ace/layer/cursor', 'ace/scrollbar', 'ace/renderloop', 'pilot/event_emitter', 'text/ace/css/editor.css'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var dom = require("pilot/dom");
-var event = require("pilot/event");
-var useragent = require("pilot/useragent");
-var GutterLayer = require("ace/layer/gutter").Gutter;
-var MarkerLayer = require("ace/layer/marker").Marker;
-var TextLayer = require("ace/layer/text").Text;
-var CursorLayer = require("ace/layer/cursor").Cursor;
-var ScrollBar = require("ace/scrollbar").ScrollBar;
-var RenderLoop = require("ace/renderloop").RenderLoop;
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-var editorCss = require("text/ace/css/editor.css");
-
-// import CSS once
-dom.importCssString(editorCss);
-
-var VirtualRenderer = function(container, theme) {
- this.container = container;
- dom.addCssClass(this.container, "ace_editor");
-
- this.setTheme(theme);
-
- this.$gutter = dom.createElement("div");
- this.$gutter.className = "ace_gutter";
- this.container.appendChild(this.$gutter);
-
- this.scroller = dom.createElement("div");
- this.scroller.className = "ace_scroller";
- this.container.appendChild(this.scroller);
-
- this.content = dom.createElement("div");
- this.content.className = "ace_content";
- this.scroller.appendChild(this.content);
-
- this.$gutterLayer = new GutterLayer(this.$gutter);
- this.$markerBack = new MarkerLayer(this.content);
-
- var textLayer = this.$textLayer = new TextLayer(this.content);
- this.canvas = textLayer.element;
-
- this.$markerFront = new MarkerLayer(this.content);
-
- this.characterWidth = textLayer.getCharacterWidth();
- this.lineHeight = textLayer.getLineHeight();
-
- this.$cursorLayer = new CursorLayer(this.content);
- this.$cursorPadding = 8;
-
- // Indicates whether the horizontal scrollbar is visible
- this.$horizScroll = true;
- this.$horizScrollAlwaysVisible = true;
-
- this.scrollBar = new ScrollBar(container);
- this.scrollBar.addEventListener("scroll", this.onScroll.bind(this));
-
- this.scrollTop = 0;
-
- this.cursorPos = {
- row : 0,
- column : 0
- };
-
- var _self = this;
- this.$textLayer.addEventListener("changeCharaterSize", function() {
- _self.characterWidth = textLayer.getCharacterWidth();
- _self.lineHeight = textLayer.getLineHeight();
- _self.$updatePrintMargin();
- _self.onResize(true);
-
- _self.$loop.schedule(_self.CHANGE_FULL);
- });
- event.addListener(this.$gutter, "click", this.$onGutterClick.bind(this));
- event.addListener(this.$gutter, "dblclick", this.$onGutterClick.bind(this));
-
- this.$size = {
- width: 0,
- height: 0,
- scrollerHeight: 0,
- scrollerWidth: 0
- };
-
- this.layerConfig = {
- width : 1,
- padding : 0,
- firstRow : 0,
- firstRowScreen: 0,
- lastRow : 0,
- lineHeight : 1,
- characterWidth : 1,
- minHeight : 1,
- maxHeight : 1,
- offset : 0,
- height : 1
- };
-
- this.$loop = new RenderLoop(this.$renderChanges.bind(this));
- this.$loop.schedule(this.CHANGE_FULL);
-
- this.setPadding(4);
- this.$updatePrintMargin();
-};
-
-(function() {
- this.showGutter = true;
-
- this.CHANGE_CURSOR = 1;
- this.CHANGE_MARKER = 2;
- this.CHANGE_GUTTER = 4;
- this.CHANGE_SCROLL = 8;
- this.CHANGE_LINES = 16;
- this.CHANGE_TEXT = 32;
- this.CHANGE_SIZE = 64;
- this.CHANGE_MARKER_BACK = 128;
- this.CHANGE_MARKER_FRONT = 256;
- this.CHANGE_FULL = 512;
-
- oop.implement(this, EventEmitter);
-
- this.setSession = function(session) {
- this.session = session;
- this.$cursorLayer.setSession(session);
- this.$markerBack.setSession(session);
- this.$markerFront.setSession(session);
- this.$gutterLayer.setSession(session);
- this.$textLayer.setSession(session);
- this.$loop.schedule(this.CHANGE_FULL);
- };
-
- /**
- * Triggers partial update of the text layer
- */
- this.updateLines = function(firstRow, lastRow) {
- if (lastRow === undefined)
- lastRow = Infinity;
-
- if (!this.$changedLines) {
- this.$changedLines = {
- firstRow: firstRow,
- lastRow: lastRow
- };
- }
- else {
- if (this.$changedLines.firstRow > firstRow)
- this.$changedLines.firstRow = firstRow;
-
- if (this.$changedLines.lastRow < lastRow)
- this.$changedLines.lastRow = lastRow;
- }
-
- this.$loop.schedule(this.CHANGE_LINES);
- };
-
- /**
- * Triggers full update of the text layer
- */
- this.updateText = function() {
- this.$loop.schedule(this.CHANGE_TEXT);
- };
-
- /**
- * Triggers a full update of all layers
- */
- this.updateFull = function() {
- this.$loop.schedule(this.CHANGE_FULL);
- };
-
- this.updateFontSize = function() {
- this.$textLayer.checkForSizeChanges();
- };
-
- /**
- * Triggers resize of the editor
- */
- this.onResize = function(force) {
- var changes = this.CHANGE_SIZE;
- var size = this.$size;
-
- var height = dom.getInnerHeight(this.container);
- if (force || size.height != height) {
- size.height = height;
-
- this.scroller.style.height = height + "px";
- size.scrollerHeight = this.scroller.clientHeight;
- this.scrollBar.setHeight(size.scrollerHeight);
-
- if (this.session) {
- this.scrollToY(this.getScrollTop());
- changes = changes | this.CHANGE_FULL;
- }
- }
-
- var width = dom.getInnerWidth(this.container);
- if (force || size.width != width) {
- size.width = width;
-
- var gutterWidth = this.showGutter ? this.$gutter.offsetWidth : 0;
- this.scroller.style.left = gutterWidth + "px";
- size.scrollerWidth = Math.max(0, width - gutterWidth - this.scrollBar.getWidth())
- this.scroller.style.width = size.scrollerWidth + "px";
-
- if (this.session.getUseWrapMode() && this.adjustWrapLimit() || force)
- changes = changes | this.CHANGE_FULL;
- }
-
- this.$loop.schedule(changes);
- };
-
- this.adjustWrapLimit = function(){
- var availableWidth = this.$size.scrollerWidth - this.$padding * 2;
- var limit = Math.floor(availableWidth / this.characterWidth) - 1;
- return this.session.adjustWrapLimit(limit);
- };
-
- this.$onGutterClick = function(e) {
- var pageX = event.getDocumentX(e);
- var pageY = event.getDocumentY(e);
-
- this._dispatchEvent("gutter" + e.type, {
- row: this.screenToTextCoordinates(pageX, pageY).row,
- htmlEvent: e
- });
- };
-
- this.setShowInvisibles = function(showInvisibles) {
- if (this.$textLayer.setShowInvisibles(showInvisibles))
- this.$loop.schedule(this.CHANGE_TEXT);
- };
-
- this.getShowInvisibles = function() {
- return this.$textLayer.showInvisibles;
- };
-
- this.$showPrintMargin = true;
- this.setShowPrintMargin = function(showPrintMargin) {
- this.$showPrintMargin = showPrintMargin;
- this.$updatePrintMargin();
- };
-
- this.getShowPrintMargin = function() {
- return this.$showPrintMargin;
- };
-
- this.$printMarginColumn = 80;
- this.setPrintMarginColumn = function(showPrintMargin) {
- this.$printMarginColumn = showPrintMargin;
- this.$updatePrintMargin();
- };
-
- this.getPrintMarginColumn = function() {
- return this.$printMarginColumn;
- };
-
- this.getShowGutter = function(){
- return this.showGutter;
- };
-
- this.setShowGutter = function(show){
- if(this.showGutter === show)
- return;
- this.$gutter.style.display = show ? "block" : "none";
- this.showGutter = show;
- this.onResize(true);
- };
-
- this.$updatePrintMargin = function() {
- var containerEl;
-
- if (!this.$showPrintMargin && !this.$printMarginEl)
- return;
-
- if (!this.$printMarginEl) {
- containerEl = dom.createElement("div");
- containerEl.className = "ace_print_margin_layer";
- this.$printMarginEl = dom.createElement("div");
- this.$printMarginEl.className = "ace_print_margin";
- containerEl.appendChild(this.$printMarginEl);
- this.content.insertBefore(containerEl, this.$textLayer.element);
- }
-
- var style = this.$printMarginEl.style;
- style.left = ((this.characterWidth * this.$printMarginColumn) + this.$padding * 2) + "px";
- style.visibility = this.$showPrintMargin ? "visible" : "hidden";
- };
-
- this.getContainerElement = function() {
- return this.container;
- };
-
- this.getMouseEventTarget = function() {
- return this.content;
- };
-
- this.getTextAreaContainer = function() {
- return this.container;
- };
-
- this.moveTextAreaToCursor = function(textarea) {
- // in IE the native cursor always shines through
- if (useragent.isIE)
- return;
-
- var pos = this.$cursorLayer.getPixelPosition();
- if (!pos)
- return;
-
- var bounds = this.content.getBoundingClientRect();
- var offset = this.layerConfig.offset;
-
- textarea.style.left = (bounds.left + pos.left + this.$padding) + "px";
- textarea.style.top = (bounds.top + pos.top - this.scrollTop + offset) + "px";
- };
-
- this.getFirstVisibleRow = function() {
- return this.layerConfig.firstRow;
- };
-
- this.getFirstFullyVisibleRow = function() {
- return this.layerConfig.firstRow + (this.layerConfig.offset === 0 ? 0 : 1);
- };
-
- this.getLastFullyVisibleRow = function() {
- var flint = Math.floor((this.layerConfig.height + this.layerConfig.offset) / this.layerConfig.lineHeight);
- return this.layerConfig.firstRow - 1 + flint;
- };
-
- this.getLastVisibleRow = function() {
- return this.layerConfig.lastRow;
- };
-
- this.$padding = null;
- this.setPadding = function(padding) {
- this.$padding = padding;
- this.$textLayer.setPadding(padding);
- this.$cursorLayer.setPadding(padding);
- this.$markerFront.setPadding(padding);
- this.$markerBack.setPadding(padding);
- this.$loop.schedule(this.CHANGE_FULL);
- this.$updatePrintMargin();
- };
-
- this.getHScrollBarAlwaysVisible = function() {
- return this.$horizScrollAlwaysVisible;
- };
-
- this.setHScrollBarAlwaysVisible = function(alwaysVisible) {
- if (this.$horizScrollAlwaysVisible != alwaysVisible) {
- this.$horizScrollAlwaysVisible = alwaysVisible;
- if (!this.$horizScrollAlwaysVisible || !this.$horizScroll)
- this.$loop.schedule(this.CHANGE_SCROLL);
- }
- };
-
- this.onScroll = function(e) {
- this.scrollToY(e.data);
- };
-
- this.$updateScrollBar = function() {
- this.scrollBar.setInnerHeight(this.layerConfig.maxHeight);
- this.scrollBar.setScrollTop(this.scrollTop);
- };
-
- this.$renderChanges = function(changes) {
- if (!changes || !this.session)
- return;
-
- // text, scrolling and resize changes can cause the view port size to change
- if (changes & this.CHANGE_FULL ||
- changes & this.CHANGE_SIZE ||
- changes & this.CHANGE_TEXT ||
- changes & this.CHANGE_LINES ||
- changes & this.CHANGE_SCROLL
- )
- this.$computeLayerConfig();
-
- // full
- if (changes & this.CHANGE_FULL) {
- this.$textLayer.update(this.layerConfig);
- if (this.showGutter)
- this.$gutterLayer.update(this.layerConfig);
- this.$markerBack.update(this.layerConfig);
- this.$markerFront.update(this.layerConfig);
- this.$cursorLayer.update(this.layerConfig);
- this.$updateScrollBar();
- return;
- }
-
- // scrolling
- if (changes & this.CHANGE_SCROLL) {
- if (changes & this.CHANGE_TEXT || changes & this.CHANGE_LINES)
- this.$textLayer.update(this.layerConfig);
- else
- this.$textLayer.scrollLines(this.layerConfig);
-
- if (this.showGutter)
- this.$gutterLayer.update(this.layerConfig);
- this.$markerBack.update(this.layerConfig);
- this.$markerFront.update(this.layerConfig);
- this.$cursorLayer.update(this.layerConfig);
- this.$updateScrollBar();
- return;
- }
-
- if (changes & this.CHANGE_TEXT) {
- this.$textLayer.update(this.layerConfig);
- if (this.showGutter)
- this.$gutterLayer.update(this.layerConfig);
- }
- else if (changes & this.CHANGE_LINES) {
- this.$updateLines();
- this.$updateScrollBar();
- if (this.showGutter)
- this.$gutterLayer.update(this.layerConfig);
- } else if (changes & this.CHANGE_GUTTER) {
- if (this.showGutter)
- this.$gutterLayer.update(this.layerConfig);
- }
-
- if (changes & this.CHANGE_CURSOR)
- this.$cursorLayer.update(this.layerConfig);
-
- if (changes & (this.CHANGE_MARKER | this.CHANGE_MARKER_FRONT)) {
- this.$markerFront.update(this.layerConfig);
- }
-
- if (changes & (this.CHANGE_MARKER | this.CHANGE_MARKER_BACK)) {
- this.$markerBack.update(this.layerConfig);
- }
-
- if (changes & this.CHANGE_SIZE)
- this.$updateScrollBar();
- };
-
- this.$computeLayerConfig = function() {
- var session = this.session;
-
- var offset = this.scrollTop % this.lineHeight;
- var minHeight = this.$size.scrollerHeight + this.lineHeight;
-
- var longestLine = this.$getLongestLine();
- var widthChanged = this.layerConfig.width != longestLine;
-
- var horizScroll = this.$horizScrollAlwaysVisible || this.$size.scrollerWidth - longestLine < 0;
- var horizScrollChanged = this.$horizScroll !== horizScroll;
- this.$horizScroll = horizScroll;
- if (horizScrollChanged)
- this.scroller.style.overflowX = horizScroll ? "scroll" : "hidden";
-
- var maxHeight = this.session.getScreenLength() * this.lineHeight;
- this.scrollTop = Math.max(0, Math.min(this.scrollTop, maxHeight - this.$size.scrollerHeight));
-
- var lineCount = Math.ceil(minHeight / this.lineHeight) - 1;
- var firstRow = Math.max(0, Math.round((this.scrollTop - offset) / this.lineHeight));
- var lastRow = firstRow + lineCount;
-
- // Map lines on the screen to lines in the document.
- var firstRowScreen, firstRowHeight;
- var lineHeight = { lineHeight: this.lineHeight };
- firstRow = session.screenToDocumentRow(firstRow, 0);
-
- // Check if firstRow is inside of a foldLine. If true, then use the first
- // row of the foldLine.
- var foldLine = session.getFoldLine(firstRow);
- if (foldLine) {
- firstRow = foldLine.start.row;
- }
-
- firstRowScreen = session.documentToScreenRow(firstRow, 0);
- firstRowHeight = session.getRowHeight(lineHeight, firstRow);
-
- lastRow = Math.min(session.screenToDocumentRow(lastRow, 0), session.getLength() - 1);
- minHeight = this.$size.scrollerHeight + session.getRowHeight(lineHeight, lastRow)+
- firstRowHeight;
-
- offset = this.scrollTop - firstRowScreen * this.lineHeight;
-
- this.layerConfig = {
- width : longestLine,
- padding : this.$padding,
- firstRow : firstRow,
- firstRowScreen: firstRowScreen,
- lastRow : lastRow,
- lineHeight : this.lineHeight,
- characterWidth : this.characterWidth,
- minHeight : minHeight,
- maxHeight : maxHeight,
- offset : offset,
- height : this.$size.scrollerHeight
- };
-
- // For debugging.
- // console.log(JSON.stringify(this.layerConfig));
-
- this.$gutterLayer.element.style.marginTop = (-offset) + "px";
- this.content.style.marginTop = (-offset) + "px";
- this.content.style.width = longestLine + "px";
- this.content.style.height = minHeight + "px";
-
- // scroller.scrollWidth was smaller than scrollLeft we needed
- if (this.$desiredScrollLeft) {
- this.scrollToX(this.$desiredScrollLeft);
- this.$desiredScrollLeft = 0;
- }
-
- // Horizontal scrollbar visibility may have changed, which changes
- // the client height of the scroller
- if (horizScrollChanged)
- this.onResize(true);
- };
-
- this.$updateLines = function() {
- var firstRow = this.$changedLines.firstRow;
- var lastRow = this.$changedLines.lastRow;
- this.$changedLines = null;
-
- var layerConfig = this.layerConfig;
-
- // if the update changes the width of the document do a full redraw
- if (layerConfig.width != this.$getLongestLine())
- return this.$textLayer.update(layerConfig);
-
- if (firstRow > layerConfig.lastRow + 1) { return; }
- if (lastRow < layerConfig.firstRow) { return; }
-
- // if the last row is unknown -> redraw everything
- if (lastRow === Infinity) {
- if (this.showGutter)
- this.$gutterLayer.update(layerConfig);
- this.$textLayer.update(layerConfig);
- return;
- }
-
- // else update only the changed rows
- this.$textLayer.updateLines(layerConfig, firstRow, lastRow);
- };
-
- this.$getLongestLine = function() {
- var charCount = this.session.getScreenWidth() + 1;
- if (this.$textLayer.showInvisibles)
- charCount += 1;
-
- return Math.max(this.$size.scrollerWidth, Math.round(charCount * this.characterWidth));
- };
-
- this.updateFrontMarkers = function() {
- this.$markerFront.setMarkers(this.session.getMarkers(true));
- this.$loop.schedule(this.CHANGE_MARKER_FRONT);
- };
-
- this.updateBackMarkers = function() {
- this.$markerBack.setMarkers(this.session.getMarkers());
- this.$loop.schedule(this.CHANGE_MARKER_BACK);
- };
-
- this.addGutterDecoration = function(row, className){
- this.$gutterLayer.addGutterDecoration(row, className);
- this.$loop.schedule(this.CHANGE_GUTTER);
- };
-
- this.removeGutterDecoration = function(row, className){
- this.$gutterLayer.removeGutterDecoration(row, className);
- this.$loop.schedule(this.CHANGE_GUTTER);
- };
-
- this.setBreakpoints = function(rows) {
- this.$gutterLayer.setBreakpoints(rows);
- this.$loop.schedule(this.CHANGE_GUTTER);
- };
-
- this.setAnnotations = function(annotations) {
- this.$gutterLayer.setAnnotations(annotations);
- this.$loop.schedule(this.CHANGE_GUTTER);
- };
-
- this.updateCursor = function() {
- this.$loop.schedule(this.CHANGE_CURSOR);
- };
-
- this.hideCursor = function() {
- this.$cursorLayer.hideCursor();
- };
-
- this.showCursor = function() {
- this.$cursorLayer.showCursor();
- };
-
- this.scrollCursorIntoView = function() {
- // the editor is not visible
- if (this.$size.scrollerHeight === 0)
- return;
-
- var pos = this.$cursorLayer.getPixelPosition();
-
- var left = pos.left + this.$padding;
- var top = pos.top;
-
- if (this.scrollTop > top) {
- this.scrollToY(top);
- }
-
- if (this.scrollTop + this.$size.scrollerHeight < top + this.lineHeight) {
- this.scrollToY(top + this.lineHeight - this.$size.scrollerHeight);
- }
-
- var scrollLeft = this.scroller.scrollLeft;
-
- if (scrollLeft > left) {
- this.scrollToX(left);
- }
-
- if (scrollLeft + this.$size.scrollerWidth < left + this.characterWidth) {
- if (left > this.layerConfig.width)
- this.$desiredScrollLeft = left + 2 * this.characterWidth;
- else
- this.scrollToX(Math.round(left + this.characterWidth - this.$size.scrollerWidth));
- }
- };
-
- this.getScrollTop = function() {
- return this.scrollTop;
- };
-
- this.getScrollLeft = function() {
- return this.scroller.scrollLeft;
- };
-
- this.getScrollTopRow = function() {
- return this.scrollTop / this.lineHeight;
- };
-
- this.getScrollBottomRow = function() {
- return Math.max(0, Math.floor((this.scrollTop + this.$size.scrollerHeight) / this.lineHeight) - 1);
- };
-
- this.scrollToRow = function(row) {
- this.scrollToY(row * this.lineHeight);
- };
-
- this.scrollToLine = function(line, center) {
- var lineHeight = { lineHeight: this.lineHeight };
- var offset = 0;
- for (var l = 1; l < line; l++) {
- offset += this.session.getRowHeight(lineHeight, l-1);
- }
-
- if (center) {
- offset -= this.$size.scrollerHeight / 2;
- }
- this.scrollToY(offset);
- };
-
- this.scrollToY = function(scrollTop) {
- // after calling scrollBar.setScrollTop
- // scrollbar sends us event with same scrollTop. ignore it
- scrollTop = Math.max(0, scrollTop);
- if (this.scrollTop !== scrollTop) {
- this.$loop.schedule(this.CHANGE_SCROLL);
- this.scrollTop = scrollTop;
- }
- };
-
- this.scrollToX = function(scrollLeft) {
- if (scrollLeft <= this.$padding)
- scrollLeft = 0;
-
- this.scroller.scrollLeft = scrollLeft;
- };
-
- this.scrollBy = function(deltaX, deltaY) {
- deltaY && this.scrollToY(this.scrollTop + deltaY);
- deltaX && this.scrollToX(this.scroller.scrollLeft + deltaX);
- };
-
- this.screenToTextCoordinates = function(pageX, pageY) {
- var canvasPos = this.scroller.getBoundingClientRect();
-
- var col = Math.round((pageX + this.scroller.scrollLeft - canvasPos.left - this.$padding - dom.getPageScrollLeft())
- / this.characterWidth);
- var row = Math.floor((pageY + this.scrollTop - canvasPos.top - dom.getPageScrollTop())
- / this.lineHeight);
-
- return this.session.screenToDocumentPosition(row, Math.max(col, 0));
- };
-
- this.textToScreenCoordinates = function(row, column) {
- var canvasPos = this.scroller.getBoundingClientRect();
- var pos = this.session.documentToScreenPosition(row, column);
-
- var x = this.$padding + Math.round(pos.column * this.characterWidth);
- var y = pos.row * this.lineHeight;
-
- return {
- pageX: canvasPos.left + x - this.getScrollLeft(),
- pageY: canvasPos.top + y - this.getScrollTop()
- };
- };
-
- this.visualizeFocus = function() {
- dom.addCssClass(this.container, "ace_focus");
- };
-
- this.visualizeBlur = function() {
- dom.removeCssClass(this.container, "ace_focus");
- };
-
- this.showComposition = function(position) {
- if (!this.$composition) {
- this.$composition = dom.createElement("div");
- this.$composition.className = "ace_composition";
- this.content.appendChild(this.$composition);
- }
-
- this.$composition.innerHTML = " ";
-
- var pos = this.$cursorLayer.getPixelPosition();
- var style = this.$composition.style;
- style.top = pos.top + "px";
- style.left = (pos.left + this.$padding) + "px";
- style.height = this.lineHeight + "px";
-
- this.hideCursor();
- };
-
- this.setCompositionText = function(text) {
- dom.setInnerText(this.$composition, text);
- };
-
- this.hideComposition = function() {
- this.showCursor();
-
- if (!this.$composition)
- return;
-
- var style = this.$composition.style;
- style.top = "-10000px";
- style.left = "-10000px";
- };
-
- this.setTheme = function(theme) {
- var _self = this;
-
- this.$themeValue = theme;
- if (!theme || typeof theme == "string") {
- theme = theme || "ace/theme/textmate";
- require([theme], function(theme) {
- afterLoad(theme);
- });
- } else {
- afterLoad(theme);
- }
-
- function afterLoad(theme) {
- if (_self.$theme)
- dom.removeCssClass(_self.container, _self.$theme);
-
- _self.$theme = theme ? theme.cssClass : null;
-
- if (_self.$theme)
- dom.addCssClass(_self.container, _self.$theme);
-
- // force re-measure of the gutter width
- if (_self.$size) {
- _self.$size.width = 0;
- _self.onResize();
- }
- }
- };
-
- this.getTheme = function() {
- return this.$themeValue;
- };
-
- // Methods allows to add / remove CSS classnames to the editor element.
- // This feature can be used by plug-ins to provide a visual indication of
- // a certain mode that editor is in.
-
- this.setStyle = function setStyle(style) {
- dom.addCssClass(this.container, style);
- };
-
- this.unsetStyle = function unsetStyle(style) {
- dom.removeCssClass(this.container, style);
- };
-
- this.destroy = function() {
- this.$textLayer.destroy();
- this.$cursorLayer.destroy();
- };
-
-}).call(VirtualRenderer.prototype);
-
-exports.VirtualRenderer = VirtualRenderer;
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Julian Viereck <julian DOT viereck AT gmail DOT com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/layer/gutter', ['require', 'exports', 'module' , 'pilot/dom'], function(require, exports, module) {
-
-var dom = require("pilot/dom");
-
-var Gutter = function(parentEl) {
- this.element = dom.createElement("div");
- this.element.className = "ace_layer ace_gutter-layer";
- parentEl.appendChild(this.element);
-
- this.$breakpoints = [];
- this.$annotations = [];
- this.$decorations = [];
-};
-
-(function() {
-
- this.setSession = function(session) {
- this.session = session;
- };
-
- this.addGutterDecoration = function(row, className){
- if (!this.$decorations[row])
- this.$decorations[row] = "";
- this.$decorations[row] += " ace_" + className;
- }
-
- this.removeGutterDecoration = function(row, className){
- this.$decorations[row] = this.$decorations[row].replace(" ace_" + className, "");
- };
-
- this.setBreakpoints = function(rows) {
- this.$breakpoints = rows.concat();
- };
-
- this.setAnnotations = function(annotations) {
- // iterate over sparse array
- this.$annotations = [];
- for (var row in annotations) if (annotations.hasOwnProperty(row)) {
- var rowAnnotations = annotations[row];
- if (!rowAnnotations)
- continue;
-
- var rowInfo = this.$annotations[row] = {
- text: []
- };
- for (var i=0; i<rowAnnotations.length; i++) {
- var annotation = rowAnnotations[i];
- rowInfo.text.push(annotation.text.replace(/"/g, """).replace(/'/g, "’").replace(/</, "<"));
- var type = annotation.type;
- if (type == "error")
- rowInfo.className = "ace_error";
- else if (type == "warning" && rowInfo.className != "ace_error")
- rowInfo.className = "ace_warning";
- else if (type == "info" && (!rowInfo.className))
- rowInfo.className = "ace_info";
- }
- }
- };
-
- this.update = function(config) {
- this.$config = config;
-
- var emptyAnno = {className: "", text: []};
- var html = [];
- var i = config.firstRow;
- var lastRow = config.lastRow;
- var fold = this.session.getNextFold(i);
- var foldStart = fold ? fold.start.row : Infinity;
-
- while (true) {
- if(i > foldStart) {
- i = fold.end.row + 1;
- fold = this.session.getNextFold(i);
- foldStart = fold ?fold.start.row :Infinity;
- }
- if(i > lastRow)
- break;
-
- var annotation = this.$annotations[i] || emptyAnno;
- html.push("<div class='ace_gutter-cell",
- this.$decorations[i] || "",
- this.$breakpoints[i] ? " ace_breakpoint " : " ",
- annotation.className,
- "' title='", annotation.text.join("\n"),
- "' style='height:", config.lineHeight, "px;'>", (i+1));
-
- var wrappedRowLength = this.session.getRowLength(i) - 1;
- while (wrappedRowLength--) {
- html.push("</div><div class='ace_gutter-cell' style='height:", config.lineHeight, "px'>¦</div>");
- }
-
- html.push("</div>");
-
- i++;
- }
- this.element = dom.setInnerHtml(this.element, html.join(""));
- this.element.style.height = config.minHeight + "px";
- };
-
-}).call(Gutter.prototype);
-
-exports.Gutter = Gutter;
-
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Julian Viereck <julian.viereck@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/layer/marker', ['require', 'exports', 'module' , 'ace/range', 'pilot/dom'], function(require, exports, module) {
-
-var Range = require("ace/range").Range;
-var dom = require("pilot/dom");
-
-var Marker = function(parentEl) {
- this.element = dom.createElement("div");
- this.element.className = "ace_layer ace_marker-layer";
- parentEl.appendChild(this.element);
-};
-
-(function() {
-
- this.$padding = 0;
-
- this.setPadding = function(padding) {
- this.$padding = padding;
- };
- this.setSession = function(session) {
- this.session = session;
- };
-
- this.setMarkers = function(markers) {
- this.markers = markers;
- };
-
- this.update = function(config) {
- var config = config || this.config;
- if (!config)
- return;
-
- this.config = config;
-
-
- var html = [];
- for ( var key in this.markers) {
- var marker = this.markers[key];
-
- var range = marker.range.clipRows(config.firstRow, config.lastRow);
- if (range.isEmpty()) continue;
-
- range = range.toScreenRange(this.session);
- if (marker.renderer) {
- var top = this.$getTop(range.start.row, config);
- var left = Math.round(
- this.$padding + range.start.column * config.characterWidth
- );
- marker.renderer(html, range, left, top, config);
- }
- else if (range.isMultiLine()) {
- if (marker.type == "text") {
- this.drawTextMarker(html, range, marker.clazz, config);
- } else {
- this.drawMultiLineMarker(
- html, range, marker.clazz, config,
- marker.type
- );
- }
- }
- else {
- this.drawSingleLineMarker(
- html, range, marker.clazz, config,
- null, marker.type
- );
- }
- }
- this.element = dom.setInnerHtml(this.element, html.join(""));
- };
-
- this.$getTop = function(row, layerConfig) {
- return (row - layerConfig.firstRowScreen) * layerConfig.lineHeight;
- };
-
- /**
- * Draws a marker, which spans a range of text in a single line
- */
- this.drawTextMarker = function(stringBuilder, range, clazz, layerConfig) {
- // selection start
- var row = range.start.row;
-
- var lineRange = new Range(
- row, range.start.column,
- row, this.session.getScreenLastRowColumn(row)
- );
- this.drawSingleLineMarker(stringBuilder, lineRange, clazz, layerConfig, 1, "text");
-
- // selection end
- row = range.end.row;
- lineRange = new Range(row, 0, row, range.end.column);
- this.drawSingleLineMarker(stringBuilder, lineRange, clazz, layerConfig, 0, "text");
-
- for (row = range.start.row + 1; row < range.end.row; row++) {
- lineRange.start.row = row;
- lineRange.end.row = row;
- lineRange.end.column = this.session.getScreenLastRowColumn(row);
- this.drawSingleLineMarker(stringBuilder, lineRange, clazz, layerConfig, 1, "text");
- }
- };
-
- /**
- * Draws a multi line marker, where lines span the full width
- */
- this.drawMultiLineMarker = function(stringBuilder, range, clazz, layerConfig, type) {
- // from selection start to the end of the line
- var padding = type === "background" ? 0 : this.$padding;
- var height = layerConfig.lineHeight;
- var width = Math.round(layerConfig.width - (range.start.column * layerConfig.characterWidth));
- var top = this.$getTop(range.start.row, layerConfig);
- var left = Math.round(
- padding + range.start.column * layerConfig.characterWidth
- );
-
- stringBuilder.push(
- "<div class='", clazz, "' style='",
- "height:", height, "px;",
- "width:", width, "px;",
- "top:", top, "px;",
- "left:", left, "px;'></div>"
- );
-
- // from start of the last line to the selection end
- top = this.$getTop(range.end.row, layerConfig);
- width = Math.round(range.end.column * layerConfig.characterWidth);
-
- stringBuilder.push(
- "<div class='", clazz, "' style='",
- "height:", height, "px;",
- "width:", width, "px;",
- "top:", top, "px;",
- "left:", padding, "px;'></div>"
- );
-
- // all the complete lines
- height = (range.end.row - range.start.row - 1) * layerConfig.lineHeight;
- if (height < 0)
- return;
- top = this.$getTop(range.start.row + 1, layerConfig);
- width = layerConfig.width;
-
- stringBuilder.push(
- "<div class='", clazz, "' style='",
- "height:", height, "px;",
- "width:", width, "px;",
- "top:", top, "px;",
- "left:", padding, "px;'></div>"
- );
- };
-
- /**
- * Draws a marker which covers one single full line
- */
- this.drawSingleLineMarker = function(stringBuilder, range, clazz, layerConfig, extraLength, type) {
- var padding = type === "background" ? 0 : this.$padding;
- var height = layerConfig.lineHeight;
-
- if (type === "background")
- var width = layerConfig.width;
- else
- width = Math.round((range.end.column + (extraLength || 0) - range.start.column) * layerConfig.characterWidth);
-
- var top = this.$getTop(range.start.row, layerConfig);
- var left = Math.round(
- padding + range.start.column * layerConfig.characterWidth
- );
-
- stringBuilder.push(
- "<div class='", clazz, "' style='",
- "height:", height, "px;",
- "width:", width, "px;",
- "top:", top, "px;",
- "left:", left,"px;'></div>"
- );
- };
-
-}).call(Marker.prototype);
-
-exports.Marker = Marker;
-
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Julian Viereck <julian DOT viereck AT gmail DOT com>
- * Mihai Sucan <mihai.sucan@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/layer/text', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/dom', 'pilot/lang', 'pilot/useragent', 'pilot/event_emitter'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var dom = require("pilot/dom");
-var lang = require("pilot/lang");
-var useragent = require("pilot/useragent");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-
-var Text = function(parentEl) {
- this.element = dom.createElement("div");
- this.element.className = "ace_layer ace_text-layer";
- this.element.style.width = "auto";
- parentEl.appendChild(this.element);
-
- this.$characterSize = this.$measureSizes() || {width: 0, height: 0};
- this.$pollSizeChanges();
-};
-
-(function() {
-
- oop.implement(this, EventEmitter);
-
- this.EOF_CHAR = "¶";
- this.EOL_CHAR = "¬";
- this.TAB_CHAR = "→";
- this.SPACE_CHAR = "·";
- this.$padding = 0;
-
- this.setPadding = function(padding) {
- this.$padding = padding;
- this.element.style.padding = "0 " + padding + "px";
- };
-
- this.getLineHeight = function() {
- return this.$characterSize.height || 1;
- };
-
- this.getCharacterWidth = function() {
- return this.$characterSize.width || 1;
- };
-
- this.checkForSizeChanges = function() {
- var size = this.$measureSizes();
- if (size && (this.$characterSize.width !== size.width || this.$characterSize.height !== size.height)) {
- this.$characterSize = size;
- this._dispatchEvent("changeCharaterSize", {data: size});
- }
- };
-
- this.$pollSizeChanges = function() {
- var self = this;
- this.$pollSizeChangesTimer = setInterval(function() {
- self.checkForSizeChanges();
- }, 500);
- };
-
- this.$fontStyles = {
- fontFamily : 1,
- fontSize : 1,
- fontWeight : 1,
- fontStyle : 1,
- lineHeight : 1
- };
-
- this.$measureSizes = function() {
- var n = 1000;
- if (!this.$measureNode) {
- var measureNode = this.$measureNode = dom.createElement("div");
- var style = measureNode.style;
-
- style.width = style.height = "auto";
- style.left = style.top = (-n * 40) + "px";
-
- style.visibility = "hidden";
- style.position = "absolute";
- style.overflow = "visible";
- style.whiteSpace = "nowrap";
-
- // in FF 3.6 monospace fonts can have a fixed sub pixel width.
- // that's why we have to measure many characters
- // Note: characterWidth can be a float!
- measureNode.innerHTML = lang.stringRepeat("Xy", n);
-
- if (document.body) {
- document.body.appendChild(measureNode);
- } else {
- var container = this.element.parentNode;
- while (!dom.hasCssClass(container, "ace_editor"))
- container = container.parentNode;
- container.appendChild(measureNode);
- }
-
- }
-
- var style = this.$measureNode.style;
- var computedStyle = dom.computedStyle(this.element);
- for (var prop in this.$fontStyles)
- style[prop] = computedStyle[prop];
-
- var size = {
- height: this.$measureNode.offsetHeight,
- width: this.$measureNode.offsetWidth / (n * 2)
- };
-
- // Size and width can be null if the editor is not visible or
- // detached from the document
- if (size.width == 0 && size.height == 0)
- return null;
-
- return size;
- };
-
- this.setSession = function(session) {
- this.session = session;
- };
-
- this.showInvisibles = false;
- this.setShowInvisibles = function(showInvisibles) {
- if (this.showInvisibles == showInvisibles)
- return false;
-
- this.showInvisibles = showInvisibles;
- return true;
- };
-
- this.$tabStrings = [];
- this.$computeTabString = function() {
- var tabSize = this.session.getTabSize();
- var tabStr = this.$tabStrings = [0];
- for (var i = 1; i < tabSize + 1; i++) {
- if (this.showInvisibles) {
- tabStr.push("<span class='ace_invisible'>"
- + this.TAB_CHAR
- + new Array(i).join(" ")
- + "</span>");
- } else {
- tabStr.push(new Array(i+1).join(" "));
- }
- }
-
- };
-
- this.updateLines = function(config, firstRow, lastRow) {
- this.$computeTabString();
- // Due to wrap line changes there can be new lines if e.g.
- // the line to updated wrapped in the meantime.
- if (this.config.lastRow != config.lastRow ||
- this.config.firstRow != config.firstRow) {
- this.scrollLines(config);
- }
- this.config = config;
-
- var first = Math.max(firstRow, config.firstRow);
- var last = Math.min(lastRow, config.lastRow);
-
- var lineElements = this.element.childNodes;
- var lineElementsIdx = 0;
-
- for (var row = config.firstRow; row < first; row++) {
- var foldLine = this.session.getFoldLine(row);
- if (foldLine) {
- if (foldLine.containsRow(first)) {
- break;
- } else {
- row = foldLine.end.row;
- }
- }
- lineElementsIdx ++;
- }
-
- for (var i=first; i<=last; i++) {
- var lineElement = lineElements[lineElementsIdx++];
- if (!lineElement)
- continue;
-
- var html = [];
- var tokens = this.session.getTokens(i, i);
- this.$renderLine(html, i, tokens[0].tokens, true);
- lineElement = dom.setInnerHtml(lineElement, html.join(""));
-
- i = this.session.getRowFoldEnd(i);
- }
- };
-
- this.scrollLines = function(config) {
- this.$computeTabString();
- var oldConfig = this.config;
- this.config = config;
-
- if (!oldConfig || oldConfig.lastRow < config.firstRow)
- return this.update(config);
-
- if (config.lastRow < oldConfig.firstRow)
- return this.update(config);
-
- var el = this.element;
- if (oldConfig.firstRow < config.firstRow)
- for (var row=this.session.getFoldedRowCount(oldConfig.firstRow, config.firstRow - 1); row>0; row--)
- el.removeChild(el.firstChild);
-
- if (oldConfig.lastRow > config.lastRow)
- for (var row=this.session.getFoldedRowCount(config.lastRow + 1, oldConfig.lastRow); row>0; row--)
- el.removeChild(el.lastChild);
-
- if (config.firstRow < oldConfig.firstRow) {
- var fragment = this.$renderLinesFragment(config, config.firstRow, oldConfig.firstRow - 1);
- if (el.firstChild)
- el.insertBefore(fragment, el.firstChild);
- else
- el.appendChild(fragment);
- }
-
- if (config.lastRow > oldConfig.lastRow) {
- var fragment = this.$renderLinesFragment(config, oldConfig.lastRow + 1, config.lastRow);
- el.appendChild(fragment);
- }
- };
-
- this.$renderLinesFragment = function(config, firstRow, lastRow) {
- var fragment = document.createDocumentFragment(),
- row = firstRow,
- fold = this.session.getNextFold(row),
- foldStart = fold ?fold.start.row :Infinity;
-
- while (true) {
- if(row > foldStart) {
- row = fold.end.row+1;
- fold = this.session.getNextFold(row);
- foldStart = fold ?fold.start.row :Infinity;
- }
- if(row > lastRow)
- break;
-
- var container = dom.createElement("div");
-
- var html = [];
- // Get the tokens per line as there might be some lines in between
- // beeing folded.
- // OPTIMIZE: If there is a long block of unfolded lines, just make
- // this call once for that big block of unfolded lines.
- var tokens = this.session.getTokens(row, row);
- if (tokens.length == 1)
- this.$renderLine(html, row, tokens[0].tokens, false);
-
- // don't use setInnerHtml since we are working with an empty DIV
- container.innerHTML = html.join("");
- var lines = container.childNodes
- while(lines.length)
- fragment.appendChild(lines[0]);
-
- row++;
- }
- return fragment;
- };
-
- this.update = function(config) {
- this.$computeTabString();
- this.config = config;
-
- var html = [];
- var firstRow = config.firstRow, lastRow = config.lastRow;
-
- var row = firstRow,
- fold = this.session.getNextFold(row),
- foldStart = fold ?fold.start.row :Infinity;
-
- while (true) {
- if(row > foldStart) {
- row = fold.end.row+1;
- fold = this.session.getNextFold(row);
- foldStart = fold ?fold.start.row :Infinity;
- }
- if(row > lastRow)
- break;
-
- // Get the tokens per line as there might be some lines in between
- // beeing folded.
- // OPTIMIZE: If there is a long block of unfolded lines, just make
- // this call once for that big block of unfolded lines.
- var tokens = this.session.getTokens(row, row);
- if (tokens.length == 1)
- this.$renderLine(html, row, tokens[0].tokens, false);
-
- row++;
- }
- this.element = dom.setInnerHtml(this.element, html.join(""));
- };
-
- this.$textToken = {
- "text": true,
- "rparen": true,
- "lparen": true
- };
-
- this.$renderToken = function(stringBuilder, screenColumn, token, value) {
- var self = this;
- var replaceReg = /\t|&|<|( +)|([\v\f \u00a0\u2000\u2001\u2002\u2003\u2004\u2005\u2006\u2007\u2008\u2009\u200a\u200b\u2028\u2029\u3000])|[\u1100-\u115F]|[\u11A3-\u11A7]|[\u11FA-\u11FF]|[\u2329-\u232A]|[\u2E80-\u2E99]|[\u2E9B-\u2EF3]|[\u2F00-\u2FD5]|[\u2FF0-\u2FFB]|[\u3000-\u303E]|[\u3041-\u3096]|[\u3099-\u30FF]|[\u3105-\u312D]|[\u3131-\u318E]|[\u3190-\u31BA]|[\u31C0-\u31E3]|[\u31F0-\u321E]|[\u3220-\u3247]|[\u3250-\u32FE]|[\u3300-\u4DBF]|[\u4E00-\uA48C]|[\uA490-\uA4C6]|[\uA960-\uA97C]|[\uAC00-\uD7A3]|[\uD7B0-\uD7C6]|[\uD7CB-\uD7FB]|[\uF900-\uFAFF]|[\uFE10-\uFE19]|[\uFE30-\uFE52]|[\uFE54-\uFE66]|[\uFE68-\uFE6B]|[\uFF01-\uFF60]|[\uFFE0-\uFFE6]/g;
- var replaceFunc = function(c, a, b, tabIdx, idx4) {
- if (c.charCodeAt(0) == 32) {
- return new Array(c.length+1).join(" ");
- } else if (c == "\t") {
- var tabSize = self.session.getScreenTabSize(screenColumn + tabIdx);
- screenColumn += tabSize - 1;
- return self.$tabStrings[tabSize];
- } else if (c == "&") {
- if (useragent.isOldGecko)
- return "&";
- else
- return "&";
- } else if (c == "<") {
- return "<";
- } else if (c.match(/[\v\f \u00a0\u2000\u2001\u2002\u2003\u2004\u2005\u2006\u2007\u2008\u2009\u200a\u200b\u2028\u2029\u3000]/)) {
- if (self.showInvisibles) {
- var space = new Array(c.length+1).join(self.SPACE_CHAR);
- return "<span class='ace_invisible'>" + space + "</span>";
- } else {
- return " ";
- }
- } else {
- screenColumn += 1;
- return "<span class='ace_cjk' style='width:" +
- (self.config.characterWidth * 2) +
- "px'>" + c + "</span>";
- }
- };
-
- var output = value.replace(replaceReg, replaceFunc);
-
- if (!this.$textToken[token.type]) {
- var classes = "ace_" + token.type.replace(/\./g, " ace_");
- stringBuilder.push("<span class='", classes, "'>", output, "</span>");
- }
- else {
- stringBuilder.push(output);
- }
- return screenColumn + value.length;
- };
-
- this.$renderLineCore = function(stringBuilder, lastRow, tokens, splits, onlyContents) {
- var chars = 0;
- var split = 0;
- var splitChars;
- var characterWidth = this.config.characterWidth;
- var screenColumn = 0;
- var self = this;
-
- if (!splits || splits.length == 0)
- splitChars = Number.MAX_VALUE;
- else
- splitChars = splits[0];
-
- if (!onlyContents) {
- stringBuilder.push("<div class='ace_line' style='height:",
- this.config.lineHeight, "px",
- "'>"
- );
- }
-
- for (var i = 0; i < tokens.length; i++) {
- var token = tokens[i];
- var value = token.value;
-
- if (chars + value.length < splitChars) {
- screenColumn = self.$renderToken(
- stringBuilder, screenColumn, token, value
- );
- chars += value.length;
- }
- else {
- while (chars + value.length >= splitChars) {
- screenColumn = self.$renderToken(
- stringBuilder, screenColumn,
- token, value.substring(0, splitChars - chars)
- );
- value = value.substring(splitChars - chars);
- chars = splitChars;
-
- if (!onlyContents) {
- stringBuilder.push("</div>",
- "<div class='ace_line' style='height:",
- this.config.lineHeight, "px",
- "'>"
- );
- }
-
- split ++;
- screenColumn = 0;
- splitChars = splits[split] || Number.MAX_VALUE;
- }
- if (value.length != 0) {
- chars += value.length;
- screenColumn = self.$renderToken(
- stringBuilder, screenColumn, token, value
- );
- }
- }
- }
-
- if (this.showInvisibles) {
- if (lastRow !== this.session.getLength() - 1)
- stringBuilder.push("<span class='ace_invisible'>" + this.EOL_CHAR + "</span>");
- else
- stringBuilder.push("<span class='ace_invisible'>" + this.EOF_CHAR + "</span>");
- }
- stringBuilder.push("</div>");
- };
-
- this.$renderLine = function(stringBuilder, row, tokens, onlyContents) {
- // Check if the line to render is folded or not. If not, things are
- // simple, otherwise, we need to fake some things...
- if (!this.session.isRowFolded(row)) {
- var splits = this.session.getRowSplitData(row);
- this.$renderLineCore(stringBuilder, row, tokens, splits, onlyContents);
- } else {
- this.$renderFoldLine(stringBuilder, row, tokens, onlyContents);
- }
- };
-
- this.$renderFoldLine = function(stringBuilder, row, tokens, onlyContents) {
- var session = this.session,
- foldLine = session.getFoldLine(row),
- renderTokens = [];
-
- function addTokens(tokens, from, to) {
- var idx = 0, col = 0;
- while ((col + tokens[idx].value.length) < from) {
- col += tokens[idx].value.length;
- idx++;
-
- if (idx == tokens.length) {
- return;
- }
- }
- if (col != from) {
- var value = tokens[idx].value.substring(from - col);
- // Check if the token value is longer then the from...to spacing.
- if (value.length > (to - from)) {
- value = value.substring(0, to - from);
- }
-
- renderTokens.push({
- type: tokens[idx].type,
- value: value
- });
-
- col = from + value.length;
- idx += 1;
- }
-
- while (col < to) {
- var value = tokens[idx].value;
- if (value.length + col > to) {
- value = value.substring(0, to - col);
- }
- renderTokens.push({
- type: tokens[idx].type,
- value: value
- });
- col += value.length;
- idx += 1;
- }
- }
-
- foldLine.walk(function(placeholder, row, column, lastColumn, isNewRow) {
- if (placeholder) {
- renderTokens.push({
- type: "fold",
- value: placeholder
- });
- } else {
- if (isNewRow) {
- tokens = this.session.getTokens(row, row)[0].tokens;
- }
- if (tokens.length != 0) {
- addTokens(tokens, lastColumn, column);
- }
- }
- }.bind(this), foldLine.end.row, this.session.getLine(foldLine.end.row).length);
-
- // TODO: Build a fake splits array!
- var splits = this.session.$useWrapMode?this.session.$wrapData[row]:null;
- this.$renderLineCore(stringBuilder, row, renderTokens, splits, onlyContents);
- };
-
- this.destroy = function() {
- clearInterval(this.$pollSizeChangesTimer);
- if (this.$measureNode)
- this.$measureNode.parentNode.removeChild(this.$measureNode);
- delete this.$measureNode;
- };
-
-}).call(Text.prototype);
-
-exports.Text = Text;
-
-});
-/* vim:ts=4:sts=4:sw=4:
- * ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- * Julian Viereck <julian.viereck@gmail.com>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/layer/cursor', ['require', 'exports', 'module' , 'pilot/dom'], function(require, exports, module) {
-
-var dom = require("pilot/dom");
-
-var Cursor = function(parentEl) {
- this.element = dom.createElement("div");
- this.element.className = "ace_layer ace_cursor-layer";
- parentEl.appendChild(this.element);
-
- this.cursor = dom.createElement("div");
- this.cursor.className = "ace_cursor ace_hidden";
- this.element.appendChild(this.cursor);
-
- this.isVisible = false;
-};
-
-(function() {
-
- this.$padding = 0;
- this.setPadding = function(padding) {
- this.$padding = padding;
- };
-
- this.setSession = function(session) {
- this.session = session;
- };
-
- this.hideCursor = function() {
- this.isVisible = false;
- dom.addCssClass(this.cursor, "ace_hidden");
- clearInterval(this.blinkId);
- };
-
- this.showCursor = function() {
- this.isVisible = true;
- dom.removeCssClass(this.cursor, "ace_hidden");
- this.cursor.style.visibility = "visible";
- this.restartTimer();
- };
-
- this.restartTimer = function() {
- clearInterval(this.blinkId);
- if (!this.isVisible) {
- return;
- }
-
- var cursor = this.cursor;
- this.blinkId = setInterval(function() {
- cursor.style.visibility = "hidden";
- setTimeout(function() {
- cursor.style.visibility = "visible";
- }, 400);
- }, 1000);
- };
-
- this.getPixelPosition = function(onScreen) {
- if (!this.config || !this.session) {
- return {
- left : 0,
- top : 0
- };
- }
-
- var position = this.session.selection.getCursor();
- var pos = this.session.documentToScreenPosition(position);
- var cursorLeft = Math.round(this.$padding +
- pos.column * this.config.characterWidth);
- var cursorTop = (pos.row - (onScreen ? this.config.firstRowScreen : 0)) *
- this.config.lineHeight;
-
- return {
- left : cursorLeft,
- top : cursorTop
- };
- };
-
- this.update = function(config) {
- this.config = config;
-
- this.pixelPos = this.getPixelPosition(true);
-
- this.cursor.style.left = this.pixelPos.left + "px";
- this.cursor.style.top = this.pixelPos.top + "px";
- this.cursor.style.width = config.characterWidth + "px";
- this.cursor.style.height = config.lineHeight + "px";
-
- var overwrite = this.session.getOverwrite()
- if (overwrite != this.overwrite) {
- this.overwrite = overwrite;
- if (overwrite)
- dom.addCssClass(this.cursor, "ace_overwrite");
- else
- dom.removeCssClass(this.cursor, "ace_overwrite");
- }
-
- this.restartTimer();
- };
-
- this.destroy = function() {
- clearInterval(this.blinkId);
- }
-
-}).call(Cursor.prototype);
-
-exports.Cursor = Cursor;
-
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/scrollbar', ['require', 'exports', 'module' , 'pilot/oop', 'pilot/dom', 'pilot/event', 'pilot/event_emitter'], function(require, exports, module) {
-
-var oop = require("pilot/oop");
-var dom = require("pilot/dom");
-var event = require("pilot/event");
-var EventEmitter = require("pilot/event_emitter").EventEmitter;
-
-var ScrollBar = function(parent) {
- this.element = dom.createElement("div");
- this.element.className = "ace_sb";
-
- this.inner = dom.createElement("div");
- this.element.appendChild(this.inner);
-
- parent.appendChild(this.element);
-
- // in OSX lion the scrollbars appear to have no width. In this case resize
- // the to show the scrollbar but still pretend that the scrollbar has a width
- // of 0px
- this.width = dom.scrollbarWidth();
- this.element.style.width = (this.width || 15) + "px";
-
- event.addListener(this.element, "scroll", this.onScroll.bind(this));
-};
-
-(function() {
- oop.implement(this, EventEmitter);
-
- this.onScroll = function() {
- this._dispatchEvent("scroll", {data: this.element.scrollTop});
- };
-
- this.getWidth = function() {
- return this.width;
- };
-
- this.setHeight = function(height) {
- this.element.style.height = height + "px";
- };
-
- this.setInnerHeight = function(height) {
- this.inner.style.height = height + "px";
- };
-
- this.setScrollTop = function(scrollTop) {
- this.element.scrollTop = scrollTop;
- };
-
-}).call(ScrollBar.prototype);
-
-exports.ScrollBar = ScrollBar;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/renderloop', ['require', 'exports', 'module' , 'pilot/event'], function(require, exports, module) {
-
-var event = require("pilot/event");
-
-var RenderLoop = function(onRender) {
- this.onRender = onRender;
- this.pending = false;
- this.changes = 0;
-};
-
-(function() {
-
- this.schedule = function(change) {
- //this.onRender(change);
- //return;
- this.changes = this.changes | change;
- if (!this.pending) {
- this.pending = true;
- var _self = this;
- this.setTimeoutZero(function() {
- _self.pending = false;
- var changes = _self.changes;
- _self.changes = 0;
- _self.onRender(changes);
- })
- }
- };
-
- this.setTimeoutZero = window.requestAnimationFrame ||
- window.webkitRequestAnimationFrame ||
- window.mozRequestAnimationFrame ||
- window.oRequestAnimationFrame ||
- window.msRequestAnimationFrame;
-
- if (this.setTimeoutZero) {
-
- this.setTimeoutZero = this.setTimeoutZero.bind(window)
- } else if (window.postMessage) {
-
- this.messageName = "zero-timeout-message";
-
- this.setTimeoutZero = function(callback) {
- if (!this.attached) {
- var _self = this;
- event.addListener(window, "message", function(e) {
- if (_self.callback && e.data == _self.messageName) {
- event.stopPropagation(e);
- _self.callback();
- }
- });
- this.attached = true;
- }
- this.callback = callback;
- window.postMessage(this.messageName, "*");
- }
-
- } else {
-
- this.setTimeoutZero = function(callback) {
- setTimeout(callback, 0);
- }
- }
-
-}).call(RenderLoop.prototype);
-
-exports.RenderLoop = RenderLoop;
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Ajax.org Code Editor (ACE).
- *
- * The Initial Developer of the Original Code is
- * Ajax.org B.V.
- * Portions created by the Initial Developer are Copyright (C) 2010
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Fabian Jakobs <fabian AT ajax DOT org>
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('ace/theme/textmate', ['require', 'exports', 'module' , 'pilot/dom'], function(require, exports, module) {
-
- var dom = require("pilot/dom");
-
- var cssText = ".ace-tm .ace_editor {\
- border: 2px solid rgb(159, 159, 159);\
-}\
-\
-.ace-tm .ace_editor.ace_focus {\
- border: 2px solid #327fbd;\
-}\
-\
-.ace-tm .ace_gutter {\
- width: 50px;\
- background: #e8e8e8;\
- color: #333;\
- overflow : hidden;\
-}\
-\
-.ace-tm .ace_gutter-layer {\
- width: 100%;\
- text-align: right;\
-}\
-\
-.ace-tm .ace_gutter-layer .ace_gutter-cell {\
- padding-right: 6px;\
-}\
-\
-.ace-tm .ace_print_margin {\
- width: 1px;\
- background: #e8e8e8;\
-}\
-\
-.ace-tm .ace_text-layer {\
- cursor: text;\
-}\
-\
-.ace-tm .ace_cursor {\
- border-left: 2px solid black;\
-}\
-\
-.ace-tm .ace_cursor.ace_overwrite {\
- border-left: 0px;\
- border-bottom: 1px solid black;\
-}\
- \
-.ace-tm .ace_line .ace_invisible {\
- color: rgb(191, 191, 191);\
-}\
-\
-.ace-tm .ace_line .ace_keyword {\
- color: blue;\
-}\
-\
-.ace-tm .ace_line .ace_constant.ace_buildin {\
- color: rgb(88, 72, 246);\
-}\
-\
-.ace-tm .ace_line .ace_constant.ace_language {\
- color: rgb(88, 92, 246);\
-}\
-\
-.ace-tm .ace_line .ace_constant.ace_library {\
- color: rgb(6, 150, 14);\
-}\
-\
-.ace-tm .ace_line .ace_invalid {\
- background-color: rgb(153, 0, 0);\
- color: white;\
-}\
-\
-.ace-tm .ace_line .ace_fold {\
- background-color: #E4E4E4;\
- border-radius: 3px;\
-}\
-\
-.ace-tm .ace_line .ace_support.ace_function {\
- color: rgb(60, 76, 114);\
-}\
-\
-.ace-tm .ace_line .ace_support.ace_constant {\
- color: rgb(6, 150, 14);\
-}\
-\
-.ace-tm .ace_line .ace_support.ace_type,\
-.ace-tm .ace_line .ace_support.ace_class {\
- color: rgb(109, 121, 222);\
-}\
-\
-.ace-tm .ace_line .ace_keyword.ace_operator {\
- color: rgb(104, 118, 135);\
-}\
-\
-.ace-tm .ace_line .ace_string {\
- color: rgb(3, 106, 7);\
-}\
-\
-.ace-tm .ace_line .ace_comment {\
- color: rgb(76, 136, 107);\
-}\
-\
-.ace-tm .ace_line .ace_comment.ace_doc {\
- color: rgb(0, 102, 255);\
-}\
-\
-.ace-tm .ace_line .ace_comment.ace_doc.ace_tag {\
- color: rgb(128, 159, 191);\
-}\
-\
-.ace-tm .ace_line .ace_constant.ace_numeric {\
- color: rgb(0, 0, 205);\
-}\
-\
-.ace-tm .ace_line .ace_variable {\
- color: rgb(49, 132, 149);\
-}\
-\
-.ace-tm .ace_line .ace_xml_pe {\
- color: rgb(104, 104, 91);\
-}\
-\
-.ace-tm .ace_marker-layer .ace_selection {\
- background: rgb(181, 213, 255);\
-}\
-\
-.ace-tm .ace_marker-layer .ace_step {\
- background: rgb(252, 255, 0);\
-}\
-\
-.ace-tm .ace_marker-layer .ace_stack {\
- background: rgb(164, 229, 101);\
-}\
-\
-.ace-tm .ace_marker-layer .ace_bracket {\
- margin: -1px 0 0 -1px;\
- border: 1px solid rgb(192, 192, 192);\
-}\
-\
-.ace-tm .ace_marker-layer .ace_active_line {\
- background: rgba(0, 0, 0, 0.07);\
-}\
-\
-.ace-tm .ace_marker-layer .ace_selected_word {\
- background: rgb(250, 250, 255);\
- border: 1px solid rgb(200, 200, 250);\
-}\
-\
-.ace-tm .ace_string.ace_regex {\
- color: rgb(255, 0, 0)\
-}";
-
- // import CSS once
- dom.importCssString(cssText);
-
- exports.cssClass = "ace-tm";
-});
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is DomTemplate.
- *
- * The Initial Developer of the Original Code is Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Joe Walker (jwalker@mozilla.com) (original author)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-define('pilot/environment', ['require', 'exports', 'module' , 'pilot/settings'], function(require, exports, module) {
-
-
-var settings = require("pilot/settings").settings;
-
-/**
- * Create an environment object
- */
-function create() {
- return {
- settings: settings
- };
-};
-
-exports.create = create;
-
-
-});
-define("text/cockpit/ui/cli_view.css", [], "" +
- "#cockpitInput { padding-left: 16px; }" +
- "" +
- ".cptOutput { overflow: auto; position: absolute; z-index: 999; display: none; }" +
- "" +
- ".cptCompletion { padding: 0; position: absolute; z-index: -1000; }" +
- ".cptCompletion.VALID { background: #FFF; }" +
- ".cptCompletion.INCOMPLETE { background: #DDD; }" +
- ".cptCompletion.INVALID { background: #DDD; }" +
- ".cptCompletion span { color: #FFF; }" +
- ".cptCompletion span.INCOMPLETE { color: #DDD; border-bottom: 2px dotted #F80; }" +
- ".cptCompletion span.INVALID { color: #DDD; border-bottom: 2px dotted #F00; }" +
- "span.cptPrompt { color: #66F; font-weight: bold; }" +
- "" +
- "" +
- ".cptHints {" +
- " color: #000;" +
- " position: absolute;" +
- " border: 1px solid rgba(230, 230, 230, 0.8);" +
- " background: rgba(250, 250, 250, 0.8);" +
- " -moz-border-radius-topleft: 10px;" +
- " -moz-border-radius-topright: 10px;" +
- " border-top-left-radius: 10px; border-top-right-radius: 10px;" +
- " z-index: 1000;" +
- " padding: 8px;" +
- " display: none;" +
- "}" +
- "" +
- ".cptFocusPopup { display: block; }" +
- ".cptFocusPopup.cptNoPopup { display: none; }" +
- "" +
- ".cptHints ul { margin: 0; padding: 0 15px; }" +
- "" +
- ".cptGt { font-weight: bold; font-size: 120%; }" +
- "");
-
-define("text/cockpit/ui/request_view.css", [], "" +
- ".cptRowIn {" +
- " display: box; display: -moz-box; display: -webkit-box;" +
- " box-orient: horizontal; -moz-box-orient: horizontal; -webkit-box-orient: horizontal;" +
- " box-align: center; -moz-box-align: center; -webkit-box-align: center;" +
- " color: #333;" +
- " background-color: #EEE;" +
- " width: 100%;" +
- " font-family: consolas, courier, monospace;" +
- "}" +
- ".cptRowIn > * { padding-left: 2px; padding-right: 2px; }" +
- ".cptRowIn > img { cursor: pointer; }" +
- ".cptHover { display: none; }" +
- ".cptRowIn:hover > .cptHover { display: block; }" +
- ".cptRowIn:hover > .cptHover.cptHidden { display: none; }" +
- ".cptOutTyped {" +
- " box-flex: 1; -moz-box-flex: 1; -webkit-box-flex: 1;" +
- " font-weight: bold; color: #000; font-size: 120%;" +
- "}" +
- ".cptRowOutput { padding-left: 10px; line-height: 1.2em; }" +
- ".cptRowOutput strong," +
- ".cptRowOutput b," +
- ".cptRowOutput th," +
- ".cptRowOutput h1," +
- ".cptRowOutput h2," +
- ".cptRowOutput h3 { color: #000; }" +
- ".cptRowOutput a { font-weight: bold; color: #666; text-decoration: none; }" +
- ".cptRowOutput a: hover { text-decoration: underline; cursor: pointer; }" +
- ".cptRowOutput input[type=password]," +
- ".cptRowOutput input[type=text]," +
- ".cptRowOutput textarea {" +
- " color: #000; font-size: 120%;" +
- " background: transparent; padding: 3px;" +
- " border-radius: 5px; -moz-border-radius: 5px; -webkit-border-radius: 5px;" +
- "}" +
- ".cptRowOutput table," +
- ".cptRowOutput td," +
- ".cptRowOutput th { border: 0; padding: 0 2px; }" +
- ".cptRowOutput .right { text-align: right; }" +
- "");
-
-define("text/ace/css/editor.css", [], ".ace_editor {" +
- " position: absolute;" +
- " overflow: hidden;" +
- " font-family: Monaco, \"Menlo\", \"Courier New\", monospace;" +
- " font-size: 12px;" +
- "}" +
- "" +
- ".ace_scroller {" +
- " position: absolute;" +
- " overflow-x: scroll;" +
- " overflow-y: hidden;" +
- "}" +
- "" +
- ".ace_content {" +
- " position: absolute;" +
- " box-sizing: border-box;" +
- " -moz-box-sizing: border-box;" +
- " -webkit-box-sizing: border-box;" +
- "}" +
- "" +
- ".ace_composition {" +
- " position: absolute;" +
- " background: #555;" +
- " color: #DDD;" +
- " z-index: 4;" +
- "}" +
- "" +
- ".ace_gutter {" +
- " position: absolute;" +
- " overflow-x: hidden;" +
- " overflow-y: hidden;" +
- " height: 100%;" +
- "}" +
- "" +
- ".ace_gutter-cell.ace_error {" +
- " background-image: url(\"data:image/gif,GIF89a%10%00%10%00%D5%00%00%F5or%F5%87%88%F5nr%F4ns%EBmq%F5z%7F%DDJT%DEKS%DFOW%F1Yc%F2ah%CE(7%CE)8%D18E%DD%40M%F2KZ%EBU%60%F4%60m%DCir%C8%16(%C8%19*%CE%255%F1%3FR%F1%3FS%E6%AB%B5%CA%5DI%CEn%5E%F7%A2%9A%C9G%3E%E0a%5B%F7%89%85%F5yy%F6%82%80%ED%82%80%FF%BF%BF%E3%C4%C4%FF%FF%FF%FF%FF%FF%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00!%F9%04%01%00%00%25%00%2C%00%00%00%00%10%00%10%00%00%06p%C0%92pH%2C%1A%8F%C8%D2H%93%E1d4%23%E4%88%D3%09mB%1DN%B48%F5%90%40%60%92G%5B%94%20%3E%22%D2%87%24%FA%20%24%C5%06A%00%20%B1%07%02B%A38%89X.v%17%82%11%13q%10%0Fi%24%0F%8B%10%7BD%12%0Ei%09%92%09%0EpD%18%15%24%0A%9Ci%05%0C%18F%18%0B%07%04%01%04%06%A0H%18%12%0D%14%0D%12%A1I%B3%B4%B5IA%00%3B\");" +
- " background-repeat: no-repeat;" +
- " background-position: 4px center;" +
- "}" +
- "" +
- ".ace_gutter-cell.ace_warning {" +
- " background-image: url(\"data:image/gif,GIF89a%10%00%10%00%D5%00%00%FF%DBr%FF%DE%81%FF%E2%8D%FF%E2%8F%FF%E4%96%FF%E3%97%FF%E5%9D%FF%E6%9E%FF%EE%C1%FF%C8Z%FF%CDk%FF%D0s%FF%D4%81%FF%D5%82%FF%D5%83%FF%DC%97%FF%DE%9D%FF%E7%B8%FF%CCl%7BQ%13%80U%15%82W%16%81U%16%89%5B%18%87%5B%18%8C%5E%1A%94d%1D%C5%83-%C9%87%2F%C6%84.%C6%85.%CD%8B2%C9%871%CB%8A3%CD%8B5%DC%98%3F%DF%9BB%E0%9CC%E1%A5U%CB%871%CF%8B5%D1%8D6%DB%97%40%DF%9AB%DD%99B%E3%B0p%E7%CC%AE%FF%FF%FF%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00!%F9%04%01%00%00%2F%00%2C%00%00%00%00%10%00%10%00%00%06a%C0%97pH%2C%1A%8FH%A1%ABTr%25%87%2B%04%82%F4%7C%B9X%91%08%CB%99%1C!%26%13%84*iJ9(%15G%CA%84%14%01%1A%97%0C%03%80%3A%9A%3E%81%84%3E%11%08%B1%8B%20%02%12%0F%18%1A%0F%0A%03'F%1C%04%0B%10%16%18%10%0B%05%1CF%1D-%06%07%9A%9A-%1EG%1B%A0%A1%A0U%A4%A5%A6BA%00%3B\");" +
- " background-repeat: no-repeat;" +
- " background-position: 4px center;" +
- "}" +
- "" +
- ".ace_editor .ace_sb {" +
- " position: absolute;" +
- " overflow-x: hidden;" +
- " overflow-y: scroll;" +
- " right: 0;" +
- "}" +
- "" +
- ".ace_editor .ace_sb div {" +
- " position: absolute;" +
- " width: 1px;" +
- " left: 0;" +
- "}" +
- "" +
- ".ace_editor .ace_print_margin_layer {" +
- " z-index: 0;" +
- " position: absolute;" +
- " overflow: hidden;" +
- " margin: 0;" +
- " left: 0;" +
- " height: 100%;" +
- " width: 100%;" +
- "}" +
- "" +
- ".ace_editor .ace_print_margin {" +
- " position: absolute;" +
- " height: 100%;" +
- "}" +
- "" +
- ".ace_editor textarea {" +
- " position: fixed;" +
- " z-index: -1;" +
- " width: 10px;" +
- " height: 30px;" +
- " opacity: 0;" +
- " background: transparent;" +
- " appearance: none;" +
- " -moz-appearance: none;" +
- " border: none;" +
- " resize: none;" +
- " outline: none;" +
- " overflow: hidden;" +
- "}" +
- "" +
- ".ace_layer {" +
- " z-index: 1;" +
- " position: absolute;" +
- " overflow: hidden;" +
- " white-space: nowrap;" +
- " height: 100%;" +
- " width: 100%;" +
- "}" +
- "" +
- ".ace_text-layer {" +
- " color: black;" +
- "}" +
- "" +
- ".ace_cjk {" +
- " display: inline-block;" +
- " text-align: center;" +
- "}" +
- "" +
- ".ace_cursor-layer {" +
- " z-index: 4;" +
- " cursor: text;" +
- " /* setting pointer-events: none; here will break mouse wheel scrolling in Safari */" +
- "}" +
- "" +
- ".ace_cursor {" +
- " z-index: 4;" +
- " position: absolute;" +
- "}" +
- "" +
- ".ace_cursor.ace_hidden {" +
- " opacity: 0.2;" +
- "}" +
- "" +
- ".ace_line {" +
- " white-space: nowrap;" +
- "}" +
- "" +
- ".ace_marker-layer {" +
- " cursor: text;" +
- " pointer-events: none;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_step {" +
- " position: absolute;" +
- " z-index: 3;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_selection {" +
- " position: absolute;" +
- " z-index: 4;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_bracket {" +
- " position: absolute;" +
- " z-index: 5;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_active_line {" +
- " position: absolute;" +
- " z-index: 2;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_selected_word {" +
- " position: absolute;" +
- " z-index: 6;" +
- " box-sizing: border-box;" +
- " -moz-box-sizing: border-box;" +
- " -webkit-box-sizing: border-box;" +
- "}" +
- "" +
- ".ace_line .ace_fold {" +
- " cursor: pointer;" +
- "}" +
- "" +
- ".ace_dragging .ace_marker-layer, .ace_dragging .ace_text-layer {" +
- " cursor: move;" +
- "}" +
- "");
-
-define("text/build/demo/styles.css", [], "html {" +
- " height: 100%;" +
- " width: 100%;" +
- " overflow: hidden;" +
- "}" +
- "" +
- "body {" +
- " overflow: hidden;" +
- " margin: 0;" +
- " padding: 0;" +
- " height: 100%;" +
- " width: 100%;" +
- " font-family: Arial, Helvetica, sans-serif, Tahoma, Verdana, sans-serif;" +
- " font-size: 12px;" +
- " background: rgb(14, 98, 165);" +
- " color: white;" +
- "}" +
- "" +
- "#logo {" +
- " padding: 15px;" +
- " margin-left: 65px;" +
- "}" +
- "" +
- "#editor {" +
- " position: absolute;" +
- " top: 0px;" +
- " left: 280px;" +
- " bottom: 0px;" +
- " right: 0px;" +
- " background: white;" +
- "}" +
- "" +
- "#controls {" +
- " padding: 5px;" +
- "}" +
- "" +
- "#controls td {" +
- " text-align: right;" +
- "}" +
- "" +
- "#controls td + td {" +
- " text-align: left;" +
- "}" +
- "" +
- "#cockpitInput {" +
- " position: absolute;" +
- " left: 280px;" +
- " right: 0px;" +
- " bottom: 0;" +
- "" +
- " border: none; outline: none;" +
- " font-family: consolas, courier, monospace;" +
- " font-size: 120%;" +
- "}" +
- "" +
- "#cockpitOutput {" +
- " padding: 10px;" +
- " margin: 0 15px;" +
- " border: 1px solid #AAA;" +
- " -moz-border-radius-topleft: 10px;" +
- " -moz-border-radius-topright: 10px;" +
- " border-top-left-radius: 4px; border-top-right-radius: 4px;" +
- " background: #DDD; color: #000;" +
- "}");
-
-define("text/build_support/style.css", [], "body {" +
- " margin:0;" +
- " padding:0;" +
- " background-color:#e6f5fc;" +
- " " +
- "}" +
- "" +
- "H2, H3, H4 {" +
- " font-family:Trebuchet MS;" +
- " font-weight:bold;" +
- " margin:0;" +
- " padding:0;" +
- "}" +
- "" +
- "H2 {" +
- " font-size:28px;" +
- " color:#263842;" +
- " padding-bottom:6px;" +
- "}" +
- "" +
- "H3 {" +
- " font-family:Trebuchet MS;" +
- " font-weight:bold;" +
- " font-size:22px;" +
- " color:#253741;" +
- " margin-top:43px;" +
- " margin-bottom:8px;" +
- "}" +
- "" +
- "H4 {" +
- " font-family:Trebuchet MS;" +
- " font-weight:bold;" +
- " font-size:21px;" +
- " color:#222222;" +
- " margin-bottom:4px;" +
- "}" +
- "" +
- "P {" +
- " padding:13px 0;" +
- " margin:0;" +
- " line-height:22px;" +
- "}" +
- "" +
- "UL{" +
- " line-height : 22px;" +
- "}" +
- "" +
- "PRE{" +
- " background : #333;" +
- " color : white;" +
- " padding : 10px;" +
- "}" +
- "" +
- "#header {" +
- " height : 227px;" +
- " position:relative;" +
- " overflow:hidden;" +
- " background: url(images/background.png) repeat-x 0 0;" +
- " border-bottom:1px solid #c9e8fa; " +
- "}" +
- "" +
- "#header .content .signature {" +
- " font-family:Trebuchet MS;" +
- " font-size:11px;" +
- " color:#ebe4d6;" +
- " position:absolute;" +
- " bottom:5px;" +
- " right:42px;" +
- " letter-spacing : 1px;" +
- "}" +
- "" +
- ".content {" +
- " width:970px;" +
- " position:relative;" +
- " overflow:hidden;" +
- " margin:0 auto;" +
- "}" +
- "" +
- "#header .content {" +
- " height:184px;" +
- " margin-top:22px;" +
- "}" +
- "" +
- "#header .content .logo {" +
- " width : 282px;" +
- " height : 184px;" +
- " background:url(images/logo.png) no-repeat 0 0;" +
- " position:absolute;" +
- " top:0;" +
- " left:0;" +
- "}" +
- "" +
- "#header .content .title {" +
- " width : 605px;" +
- " height : 58px;" +
- " background:url(images/ace.png) no-repeat 0 0;" +
- " position:absolute;" +
- " top:98px;" +
- " left:329px;" +
- "}" +
- "" +
- "#wrapper {" +
- " background:url(images/body_background.png) repeat-x 0 0;" +
- " min-height:250px;" +
- "}" +
- "" +
- "#wrapper .content {" +
- " font-family:Arial;" +
- " font-size:14px;" +
- " color:#222222;" +
- " width:1000px;" +
- "}" +
- "" +
- "#wrapper .content .column1 {" +
- " position:relative;" +
- " overflow:hidden;" +
- " float:left;" +
- " width:315px;" +
- " margin-right:31px;" +
- "}" +
- "" +
- "#wrapper .content .column2 {" +
- " position:relative;" +
- " overflow:hidden;" +
- " float:left;" +
- " width:600px;" +
- " padding-top:47px;" +
- "}" +
- "" +
- ".fork_on_github {" +
- " width:310px;" +
- " height:80px;" +
- " background:url(images/fork_on_github.png) no-repeat 0 0;" +
- " position:relative;" +
- " overflow:hidden;" +
- " margin-top:49px;" +
- " cursor:pointer;" +
- "}" +
- "" +
- ".fork_on_github:hover {" +
- " background-position:0 -80px;" +
- "}" +
- "" +
- ".divider {" +
- " height:3px;" +
- " background-color:#bedaea;" +
- " margin-bottom:3px;" +
- "}" +
- "" +
- ".menu {" +
- " padding:23px 0 0 24px;" +
- "}" +
- "" +
- "UL.content-list {" +
- " padding:15px;" +
- " margin:0;" +
- "}" +
- "" +
- "UL.menu-list {" +
- " padding:0;" +
- " margin:0 0 20px 0;" +
- " list-style-type:none;" +
- " line-height : 16px;" +
- "}" +
- "" +
- "UL.menu-list LI {" +
- " color:#2557b4;" +
- " font-family:Trebuchet MS;" +
- " font-size:14px;" +
- " padding:7px 0;" +
- " border-bottom:1px dotted #d6e2e7;" +
- "}" +
- "" +
- "UL.menu-list LI:last-child {" +
- " border-bottom:0;" +
- "}" +
- "" +
- "A {" +
- " color:#2557b4;" +
- " text-decoration:none;" +
- "}" +
- "" +
- "A:hover {" +
- " text-decoration:underline;" +
- "}" +
- "" +
- "P#first{" +
- " background : rgba(255,255,255,0.5);" +
- " padding : 20px;" +
- " font-size : 16px;" +
- " line-height : 24px;" +
- " margin : 0 0 20px 0;" +
- "}" +
- "" +
- "#footer {" +
- " height:40px;" +
- " position:relative;" +
- " overflow:hidden;" +
- " background:url(images/bottombar.png) repeat-x 0 0;" +
- " position:relative;" +
- " margin-top:40px;" +
- "}" +
- "" +
- "UL.menu-footer {" +
- " padding:0;" +
- " margin:8px 11px 0 0;" +
- " list-style-type:none;" +
- " float:right;" +
- "}" +
- "" +
- "UL.menu-footer LI {" +
- " color:white;" +
- " font-family:Arial;" +
- " font-size:12px;" +
- " display:inline-block;" +
- " margin:0 1px;" +
- "}" +
- "" +
- "UL.menu-footer LI A {" +
- " color:#8dd0ff;" +
- " text-decoration:none;" +
- "}" +
- "" +
- "UL.menu-footer LI A:hover {" +
- " text-decoration:underline;" +
- "}" +
- "" +
- "" +
- "" +
- "" +
- "");
-
-define("text/demo/styles.css", [], "html {" +
- " height: 100%;" +
- " width: 100%;" +
- " overflow: hidden;" +
- "}" +
- "" +
- "body {" +
- " overflow: hidden;" +
- " margin: 0;" +
- " padding: 0;" +
- " height: 100%;" +
- " width: 100%;" +
- " font-family: Arial, Helvetica, sans-serif, Tahoma, Verdana, sans-serif;" +
- " font-size: 12px;" +
- " background: rgb(14, 98, 165);" +
- " color: white;" +
- "}" +
- "" +
- "#logo {" +
- " padding: 15px;" +
- " margin-left: 65px;" +
- "}" +
- "" +
- "#editor {" +
- " position: absolute;" +
- " top: 0px;" +
- " left: 280px;" +
- " bottom: 0px;" +
- " right: 0px;" +
- " background: white;" +
- "}" +
- "" +
- "#controls {" +
- " padding: 5px;" +
- "}" +
- "" +
- "#controls td {" +
- " text-align: right;" +
- "}" +
- "" +
- "#controls td + td {" +
- " text-align: left;" +
- "}" +
- "" +
- "#cockpitInput {" +
- " position: absolute;" +
- " left: 280px;" +
- " right: 0px;" +
- " bottom: 0;" +
- "" +
- " border: none; outline: none;" +
- " font-family: consolas, courier, monospace;" +
- " font-size: 120%;" +
- "}" +
- "" +
- "#cockpitOutput {" +
- " padding: 10px;" +
- " margin: 0 15px;" +
- " border: 1px solid #AAA;" +
- " -moz-border-radius-topleft: 10px;" +
- " -moz-border-radius-topright: 10px;" +
- " border-top-left-radius: 4px; border-top-right-radius: 4px;" +
- " background: #DDD; color: #000;" +
- "}");
-
-define("text/deps/csslint/demos/demo.css", [], "@charset \"UTF-8\";" +
- "" +
- "@import url(\"booya.css\") print,screen;" +
- "@import \"whatup.css\" screen;" +
- "@import \"wicked.css\";" +
- "" +
- "@namespace \"http://www.w3.org/1999/xhtml\";" +
- "@namespace svg \"http://www.w3.org/2000/svg\";" +
- "" +
- "li.inline #foo {" +
- " background: url(\"something.png\");" +
- " display: inline;" +
- " padding-left: 3px;" +
- " padding-right: 7px;" +
- " border-right: 1px dotted #066;" +
- "}" +
- "" +
- "li.last.first {" +
- " display: inline;" +
- " padding-left: 3px !important;" +
- " padding-right: 3px;" +
- " border-right: 0px;" +
- "}" +
- "" +
- "@media print {" +
- " li.inline {" +
- " color: black;" +
- " }" +
- "" +
- "" +
- "@charset \"UTF-8\"; " +
- "" +
- "@page {" +
- " margin: 10%;" +
- " counter-increment: page;" +
- "" +
- " @top-center {" +
- " font-family: sans-serif;" +
- " font-weight: bold;" +
- " font-size: 2em;" +
- " content: counter(page);" +
- " }" +
- "}");
-
-define("text/deps/requirejs/dist/ie.css", [], "" +
- "body .sect {" +
- " display: none;" +
- "}" +
- "" +
- "" +
- "#content ul.index {" +
- " list-style: none;" +
- "}" +
- "");
-
-define("text/deps/requirejs/dist/main.css", [], "@font-face {" +
- " font-family: Inconsolata;" +
- " src: url(\"fonts/Inconsolata.ttf\");" +
- "}" +
- "" +
- "* {" +
- " -moz-box-sizing: border-box;" +
- " -webkit-box-sizing: border-box;" +
- " box-sizing: border-box;" +
- " margin: 0;" +
- " padding: 0;" +
- "}" +
- "" +
- "body {" +
- " font-size: 12px;" +
- " line-height: 21px;" +
- " background-color: #fff;" +
- " font-family: \"Helvetica Neue\", Helvetica, Arial, Verdana, sans-serif;" +
- " color: #0a0a0a;" +
- "}" +
- "" +
- "#wrapper {" +
- " margin: 0;" +
- "}" +
- "" +
- "#grid {" +
- " position: fixed;" +
- " top: 0;" +
- " left: 0;" +
- " width: 796px;" +
- " background-image: url(\"i/grid.png\");" +
- " z-index: 100;" +
- "}" +
- "" +
- "pre {" +
- " line-height: 18px;" +
- " font-size: 13px;" +
- " margin: 7px 0 21px;" +
- " padding: 5px 10px;" +
- " overflow: auto;" +
- " background-color: #fafafa;" +
- " border: 1px solid #e6e6e6;" +
- " -moz-border-radius: 5px;" +
- " -webkit-border-radius: 5px;" +
- " border-radius: 5px;" +
- " -moz-box-shadow: 0 2px 5px rgba(0, 0, 0, 0.05);" +
- " -webkit-box-shadow: 0 2px 5px rgba(0, 0, 0, 0.05);" +
- " box-shadow: 0 2px 5px rgba(0, 0, 0, 0.05);" +
- "}" +
- "" +
- "/*" +
- " typography stuff" +
- "*/" +
- ".mono {" +
- " font-family: \"Inconsolata\", Andale Mono, Monaco, Monospace;" +
- "}" +
- "" +
- ".sans {" +
- " font-family: \"Helvetica Neue\", Helvetica, Arial, Verdana, sans-serif;" +
- "}" +
- "" +
- ".serif {" +
- " font-family: \"Georgia\", Times New Roman, Times, serif;" +
- "}" +
- "" +
- "a {" +
- " color: #2e87dd;" +
- " text-decoration: none;" +
- "}" +
- "" +
- "a:hover {" +
- " text-decoration: underline;" +
- "}" +
- "" +
- "/*" +
- " navigation" +
- "*/" +
- "" +
- "#navBg {" +
- " background-color: #f2f2f2;" +
- " background-image: url(\"i/shadow.png\");" +
- " background-position: right top;" +
- " background-repeat: repeat-y;" +
- " width: 220px;" +
- " position: fixed;" +
- " top: 0;" +
- " left: 0;" +
- " z-index: 0;" +
- "}" +
- "" +
- "#nav {" +
- " background-image: url(\"i/logo.png\");" +
- " background-repeat: no-repeat;" +
- " background-position: center 10px;" +
- " width: 220px;" +
- " float: left;" +
- " margin: 0;" +
- " padding: 150px 20px 0;" +
- " font-size: 13px;" +
- " text-shadow: 1px 1px #fff;" +
- " position: relative;" +
- " z-index: 1;" +
- "}" +
- "" +
- "#nav .homeImageLink {" +
- " position: absolute;" +
- " display: block;" +
- " top: 10px;" +
- " left: 0;" +
- " width: 220px;" +
- " height: 138px;" +
- "}" +
- "#nav ul {" +
- " list-style-type:none;" +
- " padding: 0;" +
- " margin: 21px 0 0 0;" +
- "}" +
- "" +
- "#nav ul li {" +
- " width: 100%;" +
- "}" +
- "" +
- "#nav ul li.version {" +
- " text-align: center;" +
- " color: #4d4d4d;" +
- "}" +
- "" +
- "#nav h1 {" +
- " color: #4d4d4d;" +
- " text-align: center;" +
- " font-size: 15px;" +
- " font-weight: normal;" +
- " text-transform: uppercase;" +
- " letter-spacing: 3px;" +
- "}" +
- "" +
- "span.spacer {" +
- " color: #2e87dd;" +
- " margin: 0 3px 0 5px;" +
- " background-image: url(\"i/dot.png\");" +
- " background-repeat: repeat-x;" +
- " background-position: left 13px;" +
- "}" +
- "" +
- "/*" +
- " icons" +
- "*/" +
- "" +
- "span.icon {" +
- " width: 16px;" +
- " display: block;" +
- " background-image: url(\"i/sprite.png\");" +
- " background-repeat: no-repeat;" +
- "}" +
- "" +
- "span.icon.home {" +
- " background-position: center 5px;" +
- "}" +
- "" +
- "span.icon.start {" +
- " background-position: center -27px;" +
- "}" +
- "" +
- "span.icon.download {" +
- " background-position: center -59px;" +
- "}" +
- "" +
- "span.icon.api {" +
- " background-position: center -89px;" +
- "}" +
- "" +
- "span.icon.optimize {" +
- " background-position: center -119px;" +
- "}" +
- "" +
- "span.icon.script {" +
- " background-position: center -150px;" +
- "}" +
- "" +
- "span.icon.question {" +
- " background-position: center -182px;" +
- "}" +
- "" +
- "span.icon.requirement {" +
- " background-position: center -214px;" +
- "}" +
- "" +
- "span.icon.history {" +
- " background-position: center -247px;" +
- "}" +
- "" +
- "span.icon.help {" +
- " background-position: center -279px;" +
- "}" +
- "" +
- "span.icon.blog {" +
- " background-position: center -311px;" +
- "}" +
- "" +
- "span.icon.twitter {" +
- " background-position: center -343px;" +
- "}" +
- "" +
- "span.icon.git {" +
- " background-position: center -375px;" +
- "}" +
- "" +
- "span.icon.fork {" +
- " background-position: center -407px;" +
- "}" +
- "" +
- "/*" +
- " content" +
- "*/" +
- "" +
- "#content {" +
- " margin: 0 0 0 220px;" +
- " padding: 0 20px;" +
- " background-color: #fff;" +
- " font-family: \"Georgia\", Times New Roman, Times, serif;" +
- " position: relative;" +
- "}" +
- "" +
- "#content p {" +
- " padding: 7px 0;" +
- " color: #333;" +
- " font-size: 14px;" +
- "}" +
- "" +
- "#content h1," +
- "#content h2," +
- "#content h3," +
- "#content h4," +
- "#content h5 {" +
- " font-weight: normal;" +
- " padding: 21px 0 7px;" +
- "}" +
- "" +
- "#content h1 {" +
- " font-size: 21px;" +
- "}" +
- "" +
- "#content h2 {" +
- " padding: 0 0 18px 0;" +
- " margin: 0 0 7px 0;" +
- " font-weight: normal;" +
- " font-size: 21px;" +
- " line-height: 24px;" +
- " text-align: center;" +
- " color: #222;" +
- " background-image: url(\"i/arrow.png\");" +
- " background-repeat: no-repeat;" +
- " background-position: center bottom;" +
- " font-family: \"Inconsolata\", Andale Mono, Monaco, Monospace;" +
- " text-transform: uppercase;" +
- " letter-spacing: 2px;" +
- " text-shadow: 1px 1px 0 #fff;" +
- "}" +
- "" +
- "#content h2 a {" +
- " color: #222;" +
- "}" +
- "" +
- "#content h2 a:hover," +
- "#content h3 a:hover," +
- "#content h4 a:hover {" +
- " text-decoration: none;" +
- "}" +
- "" +
- "span.sectionMark {" +
- " display: block;" +
- " color: #aaa;" +
- " text-shadow: 1px 1px 0 #fff;" +
- " font-size: 15px;" +
- " font-family: \"Inconsolata\", Andale Mono, Monaco, Monospace;" +
- "}" +
- "" +
- "#content h3 {" +
- " font-size: 17px;" +
- "}" +
- "" +
- "#content h4 {" +
- " padding-top: 0;" +
- " font-size: 15px;" +
- "}" +
- "" +
- "#content h5 {" +
- " font-size: 10px;" +
- "}" +
- "" +
- "#content ul {" +
- " list-style-type: disc;" +
- "}" +
- "" +
- "#content ul," +
- "#content ol {" +
- " /* border-left: 1px solid #333; */" +
- " color: #333;" +
- " font-size: 14px;" +
- " list-style-position: outside;" +
- " margin: 7px 0 21px 0;" +
- " /* padding: 0 0 0 28px; */" +
- "}" +
- "" +
- "#content ul {" +
- " font-style: italic;" +
- "}" +
- "" +
- "#content ol {" +
- " border: none;" +
- " list-style-position: inside;" +
- " padding: 0;" +
- " font-family: \"Georgia\", Times New Roman, Times, serif;" +
- "}" +
- "" +
- "#content ul ul," +
- "#content ol ol {" +
- " border: none;" +
- " padding: 0;" +
- " margin: 0 0 0 28px;" +
- "}" +
- "" +
- "#content .section {" +
- " padding: 48px 0;" +
- " background-image: url(\"i/line.png\");" +
- " background-repeat: no-repeat;" +
- " background-position: center bottom;" +
- " width: 576px;" +
- " margin: 0 auto;" +
- "}" +
- "" +
- "#content .section .subSection {" +
- " padding: 0 0 0 48px;" +
- " margin: 28px 0 0 0;" +
- " display: block;" +
- " border-left: 2px solid #ddd;" +
- "}" +
- "" +
- "#content .section:last-child {" +
- " background-image: none;" +
- "}" +
- "" +
- "#content .note {" +
- " color: #222;" +
- " background-color: #ffff99;" +
- " padding: 5px 10px;" +
- " margin: 7px 0;" +
- " display: inline-block;" +
- "}" +
- "" +
- "/*" +
- " page directory" +
- "*/" +
- "" +
- "#content #directory.section {" +
- " background-color: #fff;" +
- " width: 576px;" +
- "}" +
- "" +
- "#content #directory.section ul ul ul {" +
- " margin: 0 0 0 48px;" +
- "}" +
- "" +
- "#content #directory.section ul ul li {" +
- " background-image: url(\"i/sprite.png\");" +
- " background-repeat: no-repeat;" +
- " background-position: left -437px;" +
- " padding-left: 18px;" +
- " font-style: normal;" +
- "}" +
- "" +
- "#content #directory h1 {" +
- " padding: 0 0 65px 0;" +
- " margin: 0 0 14px 0;" +
- " font-weight: normal;" +
- " font-size: 21px;" +
- " text-align: center;" +
- " text-transform: uppercase;" +
- " letter-spacing: 2px;" +
- " color: #222;" +
- " background-image: url(\"i/arrow-x.png\");" +
- " background-repeat: no-repeat;" +
- " background-position: center bottom;" +
- " font-family: \"Inconsolata\", Andale Mono, Monaco, Monospace;" +
- "}" +
- "" +
- "" +
- "#content ul.index {" +
- " padding: 0;" +
- " background-color: transparent;" +
- " border: none;" +
- " -moz-box-shadow: none;" +
- " font-style: normal;" +
- " font-family: \"Inconsolata\", Andale Mono, Monaco, Monospace;" +
- "}" +
- "" +
- "#content ul.index li {" +
- " width: 100%;" +
- " font-size: 15px;" +
- " color: #333;" +
- " padding: 0 0 7px 0;" +
- "}" +
- "" +
- "" +
- "/*" +
- " intro page specific" +
- "*/" +
- "" +
- "#content #intro {" +
- " width: 576px;" +
- " margin: 0 auto;" +
- " padding: 21px 0;" +
- "}" +
- "" +
- "#content #intro p," +
- "#content #intro h1 {" +
- " font-size: 19px;" +
- " line-height: 28px;" +
- " color: green;" +
- " letter-spacing: 2px;" +
- " padding: 0 0 28px 0;" +
- "}" +
- "" +
- "#content #intro p:last-child," +
- "#content #intro h1:last-child {" +
- " padding: 0;" +
- "}" +
- "" +
- "#content #intro p a {" +
- " color: green;" +
- " text-decoration: underline;" +
- "}" +
- "" +
- "/*" +
- " download page" +
- "*/" +
- "" +
- "#content h4 a.download {" +
- " -webkit-border-radius: 5px;" +
- " -moz-border-radius: 5px;" +
- " background-color: #F2F2F2;" +
- " background-image: url(\"i/sprite.png\"), -moz-linear-gradient(center top , #FAFAFA 0%, #F2F2F2 100%);" +
- " background-image: url(\"i/sprite.png\"), -webkit-gradient(linear, left top, left bottom, color-stop(0%, #fafafa), color-stop(100%, #f2f2f2));" +
- " background-position: 7px -58px, center center;" +
- " background-repeat: no-repeat, no-repeat;" +
- " border: 1px solid #CCCCCC;" +
- " color: #333333;" +
- " font-size: 12px;" +
- " margin: 0 0 0 5px;" +
- " padding: 0 10px 0 25px;" +
- " text-shadow: 1px 1px 0 #FFFFFF;" +
- "}" +
- "" +
- "/*" +
- " footer" +
- "*/" +
- "#footer {" +
- " color: #4d4d4d;" +
- " padding: 65px 20px 20px;" +
- " margin: 20px 0 0 220px;" +
- " text-align: center;" +
- " display: block;" +
- " font-size: 13px;" +
- " background-image: url(\"i/arrow-x.png\");" +
- " background-repeat: no-repeat;" +
- " background-position: center top;" +
- " background-color: #fff;" +
- "}" +
- "" +
- "#footer .line {" +
- " display: block;" +
- "}" +
- "" +
- "#footer .line a {" +
- " color: #4d4d4d;" +
- " text-decoration: underline;" +
- "}" +
- "" +
- "/*" +
- " Pygments manni style" +
- "*/" +
- "" +
- "code {background-color: #fafafa; color: #333;}" +
- "" +
- "code .comment {color: green; font-style: italic}" +
- "code .comment.preproc {color: #099; font-style: normal}" +
- "code .comment.special {font-weight: bold}" +
- "" +
- "code .keyword {color: #069; font-weight: bold}" +
- "code .keyword.pseudo {font-weight: normal}" +
- "code .keyword.type {color: #078}" +
- "" +
- "code .operator {color: #555}" +
- "code .operator.word {color: #000; font-weight: bold}" +
- "" +
- "code .name.builtin {color: #366}" +
- "code .name.function {color: #c0f}" +
- "code .name.class {color: #0a8; font-weight: bold}" +
- "code .name.namespace {color: #0cf; font-weight: bold}" +
- "code .name.exception {color: #c00; font-weight: bold}" +
- "code .name.variable {color: #033}" +
- "code .name.constant {color: #360}" +
- "code .name.label {color: #99f}" +
- "code .name.entity {color: #999; font-weight: bold}" +
- "code .name.attribute {color: #309}" +
- "code .name.tag {color: #309; font-weight: bold}" +
- "code .name.decorator {color: #99f}" +
- "" +
- "code .string {color: #c30}" +
- "code .string.doc {font-style: italic}" +
- "code .string.interpol {color: #a00}" +
- "code .string.escape {color: #c30; font-weight: bold}" +
- "code .string.regex {color: #3aa}" +
- "code .string.symbol {color: #fc3}" +
- "code .string.other {color: #c30}" +
- "" +
- "code .number {color: #f60}" +
- "" +
- "" +
- "/*" +
- " webkit scroll bars" +
- "*/" +
- "" +
- "pre::-webkit-scrollbar {" +
- " width: 6px;" +
- " height: 6px;" +
- "}" +
- "" +
- "pre::-webkit-scrollbar-button:start:decrement," +
- "pre::-webkit-scrollbar-button:end:increment {" +
- " display: block;" +
- " height: 0;" +
- " width: 0;" +
- "}" +
- "" +
- "pre::-webkit-scrollbar-button:vertical:increment," +
- "pre::-webkit-scrollbar-button:horizontal:increment {" +
- " background-color: transparent;" +
- " display: block;" +
- " height: 0;" +
- " width: 0;" +
- "}" +
- "" +
- "pre::-webkit-scrollbar-track-piece {" +
- " -webkit-border-radius: 3px;" +
- "}" +
- "" +
- "pre::-webkit-scrollbar-thumb:vertical {" +
- " background-color: #aaa;" +
- " -webkit-border-radius: 3px;" +
- "" +
- "}" +
- "" +
- "pre::-webkit-scrollbar-thumb:horizontal {" +
- " background-color: #aaa;" +
- " -webkit-border-radius: 3px;" +
- "}" +
- "" +
- "/*" +
- " hbox" +
- "*/" +
- "" +
- ".hbox {" +
- " display: -webkit-box;" +
- " -webkit-box-orient: horizontal;" +
- " -webkit-box-align: stretch;" +
- "" +
- " display: -moz-box;" +
- " -moz-box-orient: horizontal;" +
- " -moz-box-align: stretch;" +
- "" +
- " display: box;" +
- " box-orient: horizontal;" +
- " box-align: stretch;" +
- "" +
- " width: 100%;" +
- "}" +
- "" +
- ".hbox > * {" +
- " -webkit-box-flex: 0;" +
- " -moz-box-flex: 0;" +
- " box-flex: 0;" +
- " display: block;" +
- "}" +
- "" +
- ".vbox {" +
- " display: -webkit-box;" +
- " -webkit-box-orient: vertical;" +
- " -webkit-box-align: stretch;" +
- "" +
- " display: -moz-box;" +
- " -moz-box-orient: vertical;" +
- " -moz-box-align: stretch;" +
- "" +
- " display: box;" +
- " box-orient: vertical;" +
- " box-align: stretch;" +
- "}" +
- "" +
- ".vbox > * {" +
- " -webkit-box-flex: 0;" +
- " -moz-box-flex: 0;" +
- " box-flex: 0;" +
- " display: block;" +
- "}" +
- "" +
- ".spacer {" +
- " -webkit-box-flex: 1;" +
- " -moz-box-flex: 1;" +
- " box-flex: 1;" +
- "}" +
- "" +
- ".reverse {" +
- " -webkit-box-direction: reverse;" +
- " -moz-box-direction: reverse;" +
- " box-direction: reverse;" +
- "}" +
- "" +
- ".boxFlex0 {" +
- " -webkit-box-flex: 0;" +
- " -moz-box-flex: 0;" +
- " box-flex: 0;" +
- "}" +
- "" +
- ".boxFlex1, .boxFlex {" +
- " -webkit-box-flex: 1;" +
- " -moz-box-flex: 1;" +
- " box-flex: 1;" +
- "}" +
- "" +
- ".boxFlex2 {" +
- " -webkit-box-flex: 2;" +
- " -moz-box-flex: 2;" +
- " box-flex: 2;" +
- "}" +
- "" +
- ".boxGroup1 {" +
- " -webkit-box-flex-group: 1;" +
- " -moz-box-flex-group: 1;" +
- " box-flex-group: 1;" +
- "}" +
- "" +
- ".boxGroup2 {" +
- " -webkit-box-flex-group: 2;" +
- " -moz-box-flex-group: 2;" +
- " box-flex-group: 2;" +
- "}" +
- "" +
- ".start {" +
- " -webkit-box-pack: start;" +
- " -moz-box-pack: start;" +
- " box-pack: start;" +
- "}" +
- "" +
- ".end {" +
- " -webkit-box-pack: end;" +
- " -moz-box-pack: end;" +
- " box-pack: end;" +
- "}" +
- "" +
- ".center {" +
- " -webkit-box-pack: center;" +
- " -moz-box-pack: center;" +
- " box-pack: center;" +
- "}" +
- "" +
- "/*" +
- " clearfix" +
- "*/" +
- "" +
- ".clearfix:after {" +
- " content: \".\";" +
- " display: block;" +
- " clear: both;" +
- " visibility: hidden;" +
- " line-height: 0;" +
- " height: 0;" +
- "}" +
- "" +
- "html[xmlns] .clearfix {" +
- " display: block;" +
- "}" +
- "" +
- "* html .clearfix {" +
- " height: 1%;" +
- "}");
-
-define("text/lib/ace/css/editor.css", [], ".ace_editor {" +
- " position: absolute;" +
- " overflow: hidden;" +
- " font-family: Monaco, \"Menlo\", \"Courier New\", monospace;" +
- " font-size: 12px;" +
- "}" +
- "" +
- ".ace_scroller {" +
- " position: absolute;" +
- " overflow-x: scroll;" +
- " overflow-y: hidden;" +
- "}" +
- "" +
- ".ace_content {" +
- " position: absolute;" +
- " box-sizing: border-box;" +
- " -moz-box-sizing: border-box;" +
- " -webkit-box-sizing: border-box;" +
- "}" +
- "" +
- ".ace_composition {" +
- " position: absolute;" +
- " background: #555;" +
- " color: #DDD;" +
- " z-index: 4;" +
- "}" +
- "" +
- ".ace_gutter {" +
- " position: absolute;" +
- " overflow-x: hidden;" +
- " overflow-y: hidden;" +
- " height: 100%;" +
- "}" +
- "" +
- ".ace_gutter-cell.ace_error {" +
- " background-image: url(\"data:image/gif,GIF89a%10%00%10%00%D5%00%00%F5or%F5%87%88%F5nr%F4ns%EBmq%F5z%7F%DDJT%DEKS%DFOW%F1Yc%F2ah%CE(7%CE)8%D18E%DD%40M%F2KZ%EBU%60%F4%60m%DCir%C8%16(%C8%19*%CE%255%F1%3FR%F1%3FS%E6%AB%B5%CA%5DI%CEn%5E%F7%A2%9A%C9G%3E%E0a%5B%F7%89%85%F5yy%F6%82%80%ED%82%80%FF%BF%BF%E3%C4%C4%FF%FF%FF%FF%FF%FF%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00!%F9%04%01%00%00%25%00%2C%00%00%00%00%10%00%10%00%00%06p%C0%92pH%2C%1A%8F%C8%D2H%93%E1d4%23%E4%88%D3%09mB%1DN%B48%F5%90%40%60%92G%5B%94%20%3E%22%D2%87%24%FA%20%24%C5%06A%00%20%B1%07%02B%A38%89X.v%17%82%11%13q%10%0Fi%24%0F%8B%10%7BD%12%0Ei%09%92%09%0EpD%18%15%24%0A%9Ci%05%0C%18F%18%0B%07%04%01%04%06%A0H%18%12%0D%14%0D%12%A1I%B3%B4%B5IA%00%3B\");" +
- " background-repeat: no-repeat;" +
- " background-position: 4px center;" +
- "}" +
- "" +
- ".ace_gutter-cell.ace_warning {" +
- " background-image: url(\"data:image/gif,GIF89a%10%00%10%00%D5%00%00%FF%DBr%FF%DE%81%FF%E2%8D%FF%E2%8F%FF%E4%96%FF%E3%97%FF%E5%9D%FF%E6%9E%FF%EE%C1%FF%C8Z%FF%CDk%FF%D0s%FF%D4%81%FF%D5%82%FF%D5%83%FF%DC%97%FF%DE%9D%FF%E7%B8%FF%CCl%7BQ%13%80U%15%82W%16%81U%16%89%5B%18%87%5B%18%8C%5E%1A%94d%1D%C5%83-%C9%87%2F%C6%84.%C6%85.%CD%8B2%C9%871%CB%8A3%CD%8B5%DC%98%3F%DF%9BB%E0%9CC%E1%A5U%CB%871%CF%8B5%D1%8D6%DB%97%40%DF%9AB%DD%99B%E3%B0p%E7%CC%AE%FF%FF%FF%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00!%F9%04%01%00%00%2F%00%2C%00%00%00%00%10%00%10%00%00%06a%C0%97pH%2C%1A%8FH%A1%ABTr%25%87%2B%04%82%F4%7C%B9X%91%08%CB%99%1C!%26%13%84*iJ9(%15G%CA%84%14%01%1A%97%0C%03%80%3A%9A%3E%81%84%3E%11%08%B1%8B%20%02%12%0F%18%1A%0F%0A%03'F%1C%04%0B%10%16%18%10%0B%05%1CF%1D-%06%07%9A%9A-%1EG%1B%A0%A1%A0U%A4%A5%A6BA%00%3B\");" +
- " background-repeat: no-repeat;" +
- " background-position: 4px center;" +
- "}" +
- "" +
- ".ace_editor .ace_sb {" +
- " position: absolute;" +
- " overflow-x: hidden;" +
- " overflow-y: scroll;" +
- " right: 0;" +
- "}" +
- "" +
- ".ace_editor .ace_sb div {" +
- " position: absolute;" +
- " width: 1px;" +
- " left: 0;" +
- "}" +
- "" +
- ".ace_editor .ace_print_margin_layer {" +
- " z-index: 0;" +
- " position: absolute;" +
- " overflow: hidden;" +
- " margin: 0;" +
- " left: 0;" +
- " height: 100%;" +
- " width: 100%;" +
- "}" +
- "" +
- ".ace_editor .ace_print_margin {" +
- " position: absolute;" +
- " height: 100%;" +
- "}" +
- "" +
- ".ace_editor textarea {" +
- " position: fixed;" +
- " z-index: -1;" +
- " width: 10px;" +
- " height: 30px;" +
- " opacity: 0;" +
- " background: transparent;" +
- " appearance: none;" +
- " -moz-appearance: none;" +
- " border: none;" +
- " resize: none;" +
- " outline: none;" +
- " overflow: hidden;" +
- "}" +
- "" +
- ".ace_layer {" +
- " z-index: 1;" +
- " position: absolute;" +
- " overflow: hidden;" +
- " white-space: nowrap;" +
- " height: 100%;" +
- " width: 100%;" +
- "}" +
- "" +
- ".ace_text-layer {" +
- " color: black;" +
- "}" +
- "" +
- ".ace_cjk {" +
- " display: inline-block;" +
- " text-align: center;" +
- "}" +
- "" +
- ".ace_cursor-layer {" +
- " z-index: 4;" +
- " cursor: text;" +
- " /* setting pointer-events: none; here will break mouse wheel scrolling in Safari */" +
- "}" +
- "" +
- ".ace_cursor {" +
- " z-index: 4;" +
- " position: absolute;" +
- "}" +
- "" +
- ".ace_cursor.ace_hidden {" +
- " opacity: 0.2;" +
- "}" +
- "" +
- ".ace_line {" +
- " white-space: nowrap;" +
- "}" +
- "" +
- ".ace_marker-layer {" +
- " cursor: text;" +
- " pointer-events: none;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_step {" +
- " position: absolute;" +
- " z-index: 3;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_selection {" +
- " position: absolute;" +
- " z-index: 4;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_bracket {" +
- " position: absolute;" +
- " z-index: 5;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_active_line {" +
- " position: absolute;" +
- " z-index: 2;" +
- "}" +
- "" +
- ".ace_marker-layer .ace_selected_word {" +
- " position: absolute;" +
- " z-index: 6;" +
- " box-sizing: border-box;" +
- " -moz-box-sizing: border-box;" +
- " -webkit-box-sizing: border-box;" +
- "}" +
- "" +
- ".ace_line .ace_fold {" +
- " cursor: pointer;" +
- "}" +
- "" +
- ".ace_dragging .ace_marker-layer, .ace_dragging .ace_text-layer {" +
- " cursor: move;" +
- "}" +
- "");
-
-define("text/node_modules/uglify-js/docstyle.css", [], "html { font-family: \"Lucida Grande\",\"Trebuchet MS\",sans-serif; font-size: 12pt; }" +
- "body { max-width: 60em; }" +
- ".title { text-align: center; }" +
- ".todo { color: red; }" +
- ".done { color: green; }" +
- ".tag { background-color:lightblue; font-weight:normal }" +
- ".target { }" +
- ".timestamp { color: grey }" +
- ".timestamp-kwd { color: CadetBlue }" +
- "p.verse { margin-left: 3% }" +
- "pre {" +
- " border: 1pt solid #AEBDCC;" +
- " background-color: #F3F5F7;" +
- " padding: 5pt;" +
- " font-family: monospace;" +
- " font-size: 90%;" +
- " overflow:auto;" +
- "}" +
- "pre.src {" +
- " background-color: #eee; color: #112; border: 1px solid #000;" +
- "}" +
- "table { border-collapse: collapse; }" +
- "td, th { vertical-align: top; }" +
- "dt { font-weight: bold; }" +
- "div.figure { padding: 0.5em; }" +
- "div.figure p { text-align: center; }" +
- ".linenr { font-size:smaller }" +
- ".code-highlighted {background-color:#ffff00;}" +
- ".org-info-js_info-navigation { border-style:none; }" +
- "#org-info-js_console-label { font-size:10px; font-weight:bold;" +
- " white-space:nowrap; }" +
- ".org-info-js_search-highlight {background-color:#ffff00; color:#000000;" +
- " font-weight:bold; }" +
- "" +
- "sup {" +
- " vertical-align: baseline;" +
- " position: relative;" +
- " top: -0.5em;" +
- " font-size: 80%;" +
- "}" +
- "" +
- "sup a:link, sup a:visited {" +
- " text-decoration: none;" +
- " color: #c00;" +
- "}" +
- "" +
- "sup a:before { content: \"[\"; color: #999; }" +
- "sup a:after { content: \"]\"; color: #999; }" +
- "" +
- "h1.title { border-bottom: 4px solid #000; padding-bottom: 5px; margin-bottom: 2em; }" +
- "" +
- "#postamble {" +
- " color: #777;" +
- " font-size: 90%;" +
- " padding-top: 1em; padding-bottom: 1em; border-top: 1px solid #999;" +
- " margin-top: 2em;" +
- " padding-left: 2em;" +
- " padding-right: 2em;" +
- " text-align: right;" +
- "}" +
- "" +
- "#postamble p { margin: 0; }" +
- "" +
- "#footnotes { border-top: 1px solid #000; }" +
- "" +
- "h1 { font-size: 200% }" +
- "h2 { font-size: 175% }" +
- "h3 { font-size: 150% }" +
- "h4 { font-size: 125% }" +
- "" +
- "h1, h2, h3, h4 { font-family: \"Bookman\",Georgia,\"Times New Roman\",serif; font-weight: normal; }" +
- "" +
- "@media print {" +
- " html { font-size: 11pt; }" +
- "}" +
- "");
-
-define("text/support/cockpit/lib/cockpit/ui/cli_view.css", [], "" +
- "#cockpitInput { padding-left: 16px; }" +
- "" +
- ".cptOutput { overflow: auto; position: absolute; z-index: 999; display: none; }" +
- "" +
- ".cptCompletion { padding: 0; position: absolute; z-index: -1000; }" +
- ".cptCompletion.VALID { background: #FFF; }" +
- ".cptCompletion.INCOMPLETE { background: #DDD; }" +
- ".cptCompletion.INVALID { background: #DDD; }" +
- ".cptCompletion span { color: #FFF; }" +
- ".cptCompletion span.INCOMPLETE { color: #DDD; border-bottom: 2px dotted #F80; }" +
- ".cptCompletion span.INVALID { color: #DDD; border-bottom: 2px dotted #F00; }" +
- "span.cptPrompt { color: #66F; font-weight: bold; }" +
- "" +
- "" +
- ".cptHints {" +
- " color: #000;" +
- " position: absolute;" +
- " border: 1px solid rgba(230, 230, 230, 0.8);" +
- " background: rgba(250, 250, 250, 0.8);" +
- " -moz-border-radius-topleft: 10px;" +
- " -moz-border-radius-topright: 10px;" +
- " border-top-left-radius: 10px; border-top-right-radius: 10px;" +
- " z-index: 1000;" +
- " padding: 8px;" +
- " display: none;" +
- "}" +
- "" +
- ".cptFocusPopup { display: block; }" +
- ".cptFocusPopup.cptNoPopup { display: none; }" +
- "" +
- ".cptHints ul { margin: 0; padding: 0 15px; }" +
- "" +
- ".cptGt { font-weight: bold; font-size: 120%; }" +
- "");
-
-define("text/support/cockpit/lib/cockpit/ui/request_view.css", [], "" +
- ".cptRowIn {" +
- " display: box; display: -moz-box; display: -webkit-box;" +
- " box-orient: horizontal; -moz-box-orient: horizontal; -webkit-box-orient: horizontal;" +
- " box-align: center; -moz-box-align: center; -webkit-box-align: center;" +
- " color: #333;" +
- " background-color: #EEE;" +
- " width: 100%;" +
- " font-family: consolas, courier, monospace;" +
- "}" +
- ".cptRowIn > * { padding-left: 2px; padding-right: 2px; }" +
- ".cptRowIn > img { cursor: pointer; }" +
- ".cptHover { display: none; }" +
- ".cptRowIn:hover > .cptHover { display: block; }" +
- ".cptRowIn:hover > .cptHover.cptHidden { display: none; }" +
- ".cptOutTyped {" +
- " box-flex: 1; -moz-box-flex: 1; -webkit-box-flex: 1;" +
- " font-weight: bold; color: #000; font-size: 120%;" +
- "}" +
- ".cptRowOutput { padding-left: 10px; line-height: 1.2em; }" +
- ".cptRowOutput strong," +
- ".cptRowOutput b," +
- ".cptRowOutput th," +
- ".cptRowOutput h1," +
- ".cptRowOutput h2," +
- ".cptRowOutput h3 { color: #000; }" +
- ".cptRowOutput a { font-weight: bold; color: #666; text-decoration: none; }" +
- ".cptRowOutput a: hover { text-decoration: underline; cursor: pointer; }" +
- ".cptRowOutput input[type=password]," +
- ".cptRowOutput input[type=text]," +
- ".cptRowOutput textarea {" +
- " color: #000; font-size: 120%;" +
- " background: transparent; padding: 3px;" +
- " border-radius: 5px; -moz-border-radius: 5px; -webkit-border-radius: 5px;" +
- "}" +
- ".cptRowOutput table," +
- ".cptRowOutput td," +
- ".cptRowOutput th { border: 0; padding: 0 2px; }" +
- ".cptRowOutput .right { text-align: right; }" +
- "");
-
-define("text/tool/Theme.tmpl.css", [], ".%cssClass% .ace_editor {" +
- " border: 2px solid rgb(159, 159, 159);" +
- "}" +
- "" +
- ".%cssClass% .ace_editor.ace_focus {" +
- " border: 2px solid #327fbd;" +
- "}" +
- "" +
- ".%cssClass% .ace_gutter {" +
- " width: 50px;" +
- " background: #e8e8e8;" +
- " color: #333;" +
- " overflow : hidden;" +
- "}" +
- "" +
- ".%cssClass% .ace_gutter-layer {" +
- " width: 100%;" +
- " text-align: right;" +
- "}" +
- "" +
- ".%cssClass% .ace_gutter-layer .ace_gutter-cell {" +
- " padding-right: 6px;" +
- "}" +
- "" +
- ".%cssClass% .ace_print_margin {" +
- " width: 1px;" +
- " background: %printMargin%;" +
- "}" +
- "" +
- ".%cssClass% .ace_scroller {" +
- " background-color: %background%;" +
- "}" +
- "" +
- ".%cssClass% .ace_text-layer {" +
- " cursor: text;" +
- " color: %foreground%;" +
- "}" +
- "" +
- ".%cssClass% .ace_cursor {" +
- " border-left: 2px solid %cursor%;" +
- "}" +
- "" +
- ".%cssClass% .ace_cursor.ace_overwrite {" +
- " border-left: 0px;" +
- " border-bottom: 1px solid %overwrite%;" +
- "}" +
- " " +
- ".%cssClass% .ace_marker-layer .ace_selection {" +
- " background: %selection%;" +
- "}" +
- "" +
- ".%cssClass% .ace_marker-layer .ace_step {" +
- " background: %step%;" +
- "}" +
- "" +
- ".%cssClass% .ace_marker-layer .ace_bracket {" +
- " margin: -1px 0 0 -1px;" +
- " border: 1px solid %bracket%;" +
- "}" +
- "" +
- ".%cssClass% .ace_marker-layer .ace_active_line {" +
- " background: %active_line%;" +
- "}" +
- "" +
- " " +
- ".%cssClass% .ace_invisible {" +
- " %invisible%" +
- "}" +
- "" +
- ".%cssClass% .ace_keyword {" +
- " %keyword%" +
- "}" +
- "" +
- ".%cssClass% .ace_keyword.ace_operator {" +
- " %keyword.operator%" +
- "}" +
- "" +
- ".%cssClass% .ace_constant {" +
- " %constant%" +
- "}" +
- "" +
- ".%cssClass% .ace_constant.ace_language {" +
- " %constant.language%" +
- "}" +
- "" +
- ".%cssClass% .ace_constant.ace_library {" +
- " %constant.library%" +
- "}" +
- "" +
- ".%cssClass% .ace_constant.ace_numeric {" +
- " %constant.numeric%" +
- "}" +
- "" +
- ".%cssClass% .ace_invalid {" +
- " %invalid%" +
- "}" +
- "" +
- ".%cssClass% .ace_invalid.ace_illegal {" +
- " %invalid.illegal%" +
- "}" +
- "" +
- ".%cssClass% .ace_invalid.ace_deprecated {" +
- " %invalid.deprecated%" +
- "}" +
- "" +
- ".%cssClass% .ace_support {" +
- " %support%" +
- "}" +
- "" +
- ".%cssClass% .ace_support.ace_function {" +
- " %support.function%" +
- "}" +
- "" +
- ".%cssClass% .ace_function.ace_buildin {" +
- " %function.buildin%" +
- "}" +
- "" +
- ".%cssClass% .ace_string {" +
- " %string%" +
- "}" +
- "" +
- ".%cssClass% .ace_string.ace_regexp {" +
- " %string.regexp%" +
- "}" +
- "" +
- ".%cssClass% .ace_comment {" +
- " %comment%" +
- "}" +
- "" +
- ".%cssClass% .ace_comment.ace_doc {" +
- " %comment.doc%" +
- "}" +
- "" +
- ".%cssClass% .ace_comment.ace_doc.ace_tag {" +
- " %comment.doc.tag%" +
- "}" +
- "" +
- ".%cssClass% .ace_variable {" +
- " %variable%" +
- "}" +
- "" +
- ".%cssClass% .ace_variable.ace_language {" +
- " %variable.language%" +
- "}" +
- "" +
- ".%cssClass% .ace_xml_pe {" +
- " %xml_pe%" +
- "}" +
- "" +
- ".%cssClass% .ace_collab.ace_user1 {" +
- " %collab.user1% " +
- "}");
-
-define("text/styles.css", [], "html {" +
- " height: 100%;" +
- " width: 100%;" +
- " overflow: hidden;" +
- "}" +
- "" +
- "body {" +
- " overflow: hidden;" +
- " margin: 0;" +
- " padding: 0;" +
- " height: 100%;" +
- " width: 100%;" +
- " font-family: Arial, Helvetica, sans-serif, Tahoma, Verdana, sans-serif;" +
- " font-size: 12px;" +
- " background: rgb(14, 98, 165);" +
- " color: white;" +
- "}" +
- "" +
- "#logo {" +
- " padding: 15px;" +
- " margin-left: 65px;" +
- "}" +
- "" +
- "#editor {" +
- " position: absolute;" +
- " top: 0px;" +
- " left: 280px;" +
- " bottom: 0px;" +
- " right: 0px;" +
- " background: white;" +
- "}" +
- "" +
- "#controls {" +
- " padding: 5px;" +
- "}" +
- "" +
- "#controls td {" +
- " text-align: right;" +
- "}" +
- "" +
- "#controls td + td {" +
- " text-align: left;" +
- "}" +
- "" +
- "#cockpitInput {" +
- " position: absolute;" +
- " left: 280px;" +
- " right: 0px;" +
- " bottom: 0;" +
- "" +
- " border: none; outline: none;" +
- " font-family: consolas, courier, monospace;" +
- " font-size: 120%;" +
- "}" +
- "" +
- "#cockpitOutput {" +
- " padding: 10px;" +
- " margin: 0 15px;" +
- " border: 1px solid #AAA;" +
- " -moz-border-radius-topleft: 10px;" +
- " -moz-border-radius-topright: 10px;" +
- " border-top-left-radius: 4px; border-top-right-radius: 4px;" +
- " background: #DDD; color: #000;" +
- "}");
-
-/* ***** BEGIN LICENSE BLOCK *****
- * Version: MPL 1.1/GPL 2.0/LGPL 2.1
- *
- * The contents of this file are subject to the Mozilla Public License Version
- * 1.1 (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- * http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS" basis,
- * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
- * for the specific language governing rights and limitations under the
- * License.
- *
- * The Original Code is Mozilla Skywriter.
- *
- * The Initial Developer of the Original Code is
- * Mozilla.
- * Portions created by the Initial Developer are Copyright (C) 2009
- * the Initial Developer. All Rights Reserved.
- *
- * Contributor(s):
- * Kevin Dangoor (kdangoor@mozilla.com)
- *
- * Alternatively, the contents of this file may be used under the terms of
- * either the GNU General Public License Version 2 or later (the "GPL"), or
- * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
- * in which case the provisions of the GPL or the LGPL are applicable instead
- * of those above. If you wish to allow use of your version of this file only
- * under the terms of either the GPL or the LGPL, and not to allow others to
- * use your version of this file under the terms of the MPL, indicate your
- * decision by deleting the provisions above and replace them with the notice
- * and other provisions required by the GPL or the LGPL. If you do not delete
- * the provisions above, a recipient may use your version of this file under
- * the terms of any one of the MPL, the GPL or the LGPL.
- *
- * ***** END LICENSE BLOCK ***** */
-
-require(["ace/ace"], function(ace) {
- window.ace = ace;
-});
\ No newline at end of file
projects / nextcloud-server.git / commitdiff