-#\r
-# Gitblit Settings\r
-#\r
-\r
-# This settings file supports parameterization from the command-line for the\r
-# following command-line parameters:\r
-#\r
-# --baseFolder ${baseFolder} SINCE 1.2.1\r
-#\r
-# Settings that support ${baseFolder} parameter substitution are indicated with the\r
-# BASEFOLDER attribute. If the --baseFolder argument is unspecified, ${baseFolder}\r
-# and it's trailing / will be discarded from the setting value leaving a relative\r
-# path that is equivalent to pre-1.2.1 releases.\r
-#\r
-# e.g. "${baseFolder}/git" becomes "git", if --baseFolder is unspecified \r
-#\r
-# Git Servlet Settings\r
-#\r
-\r
-# Base folder for repositories.\r
-# This folder may contain bare and non-bare repositories but Gitblit will only\r
-# allow you to push to bare repositories.\r
-# Use forward slashes even on Windows!!\r
-# e.g. c:/gitrepos\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-# BASEFOLDER\r
-git.repositoriesFolder = ${baseFolder}/git\r
-\r
-# Build the available repository list at startup and cache this list for reuse.\r
-# This reduces disk io when presenting the repositories page, responding to rpcs,\r
-# etc, but it means that Gitblit will not automatically identify repositories\r
-# added or deleted by external tools.\r
-#\r
-# For this case you can use curl, wget, etc to issue an rpc request to clear the\r
-# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE)\r
-#\r
-# SINCE 1.1.0\r
-git.cacheRepositoryList = true\r
-\r
-# Search the repositories folder subfolders for other repositories.\r
-# Repositories MAY NOT be nested (i.e. one repository within another)\r
-# but they may be grouped together in subfolders.\r
-# e.g. c:/gitrepos/libraries/mylibrary.git\r
-# c:/gitrepos/libraries/myotherlibrary.git\r
-#\r
-# SINCE 0.5.0\r
-git.searchRepositoriesSubfolders = true\r
-\r
-# Maximum number of folders to recurse into when searching for repositories.\r
-# The default value, -1, disables depth limits.\r
-#\r
-# SINCE 1.1.0\r
-git.searchRecursionDepth = -1\r
-\r
-# List of regex exclusion patterns to match against folders found in\r
-# *git.repositoriesFolder*.\r
-# Use forward slashes even on Windows!!\r
-# e.g. test/jgit\.git\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.1.0\r
-git.searchExclusions =\r
-\r
-# List of regex url patterns for extracting a repository name when locating\r
-# submodules.\r
-# e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract\r
-# *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git*\r
-# If no matches are found then the submodule repository name is assumed to be\r
-# whatever trails the last / character. (e.g. gitblit.git).\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.1.0\r
-git.submoduleUrlPatterns = .*?://github.com/(.*)\r
-\r
-# Specify the interface for Git Daemon to bind it's service.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 1.3.0\r
-# RESTART REQUIRED\r
-git.daemonBindInterface = \r
-\r
-# port for serving the Git Daemon service. <= 0 disables this service.\r
-# On Unix/Linux systems, ports < 1024 require root permissions.\r
-# Recommended value: 9418\r
-#\r
-# SINCE 1.3.0\r
-# RESTART REQUIRED\r
-git.daemonPort = 9418\r
-\r
-# The port for serving the SSH service. <= 0 disables this service.\r
-# On Unix/Linux systems, ports < 1024 require root permissions.\r
-# Recommended value: 29418\r
-#\r
-# SINCE 1.5.0\r
-# RESTART REQUIRED\r
-git.sshPort = 29418\r
-\r
-# Specify the interface for the SSH daemon to bind its service.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 1.5.0\r
-# RESTART REQUIRED\r
-git.sshBindInterface = \r
-\r
-# Specify the SSH key manager to use for retrieving, storing, and removing\r
-# SSH keys.\r
-#\r
-# Valid key managers are:\r
-# com.gitblit.transport.ssh.FileKeyManager\r
-#\r
-# SINCE 1.5.0\r
-git.sshKeysManager = com.gitblit.transport.ssh.FileKeyManager\r
-\r
-# Directory for storing user SSH keys when using the FileKeyManager.\r
-#\r
-# SINCE 1.5.0\r
-git.sshKeysFolder= ${baseFolder}/ssh\r
-\r
-# SSH backend NIO2|MINA.\r
-#\r
-# The Apache Mina project recommends using the NIO2 backend.\r
-#\r
-# SINCE 1.5.0\r
-git.sshBackend = NIO2\r
-\r
-# Number of threads used to parse a command line submitted by a client over SSH\r
-# for execution, create the internal data structures used by that command,\r
-# and schedule it for execution on another thread.\r
-#\r
-# SINCE 1.5.0\r
-git.sshCommandStartThreads = 2\r
-\r
-\r
-# Allow push/pull over http/https with JGit servlet.\r
-# If you do NOT want to allow Git clients to clone/push to Gitblit set this\r
-# to false. You might want to do this if you are only using ssh:// or git://.\r
-# If you set this false, consider changing the *web.otherUrls* setting to\r
-# indicate your clone/push urls.\r
-#\r
-# SINCE 0.5.0\r
-git.enableGitServlet = true\r
-\r
-# If you want to restrict all git servlet access to those with valid X509 client\r
-# certificates then set this value to true.\r
-#\r
-# SINCE 1.2.0\r
-git.requiresClientCertificate = false\r
-\r
-# Enforce date checks on client certificates to ensure that they are not being\r
-# used prematurely and that they have not expired.\r
-#\r
-# SINCE 1.2.0\r
-git.enforceCertificateValidity = true\r
-\r
-# List of OIDs to extract from a client certificate DN to map a certificate to\r
-# an account username.\r
-#\r
-# e.g. git.certificateUsernameOIDs = CN\r
-# e.g. git.certificateUsernameOIDs = FirstName LastName\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.2.0\r
-git.certificateUsernameOIDs = CN\r
-\r
-# Only serve/display bare repositories.\r
-# If there are non-bare repositories in git.repositoriesFolder and this setting\r
-# is true, they will be excluded from the ui. \r
-#\r
-# SINCE 0.9.0\r
-git.onlyAccessBareRepositories = false\r
-\r
-\r
-# Specify the list of acceptable transports for pushes.\r
-# If this setting is empty, all transports are acceptable.\r
-#\r
-# Valid choices are: GIT HTTP HTTPS SSH\r
-#\r
-# SINCE 1.5.0\r
-# SPACE-DELIMITED\r
-git.acceptedPushTransports = HTTP HTTPS SSH\r
-\r
-# Allow an authenticated user to create a destination repository on a push if\r
-# the repository does not already exist.\r
-#\r
-# Administrator accounts can create a repository in any project.\r
-# These repositories are created with the default access restriction and authorization\r
-# control values. The pushing account is set as the owner.\r
-#\r
-# Non-administrator accounts with the CREATE role may create personal repositories.\r
-# These repositories are created as VIEW restricted for NAMED users.\r
-# The pushing account is set as the owner.\r
-#\r
-# SINCE 1.2.0\r
-git.allowCreateOnPush = true\r
-\r
-# Global setting to control anonymous pushes.\r
-#\r
-# This setting allows/rejects anonymous pushes at the level of the receive pack.\r
-# This trumps all repository config settings. While anonymous pushes are convenient\r
-# on your own box when you are a lone developer, they are not recommended for\r
-# any multi-user installation where accountability is required. Since Gitblit\r
-# tracks pushes and user accounts, allowing anonymous pushes compromises that\r
-# information.\r
-#\r
-# SINCE 1.4.0\r
-git.allowAnonymousPushes = false\r
-\r
-# The default access restriction for new repositories.\r
-# Valid values are NONE, PUSH, CLONE, VIEW\r
-# NONE = anonymous view, clone, & push\r
-# PUSH = anonymous view & clone and authenticated push\r
-# CLONE = anonymous view, authenticated clone & push\r
-# VIEW = authenticated view, clone, & push\r
-#\r
-# SINCE 1.0.0\r
-git.defaultAccessRestriction = PUSH\r
-\r
-# The default authorization control for new repositories.\r
-# Valid values are AUTHENTICATED and NAMED\r
-# AUTHENTICATED = any authenticated user is granted restricted access\r
-# NAMED = only named users/teams are granted restricted access\r
-#\r
-# SINCE 1.1.0\r
-git.defaultAuthorizationControl = NAMED\r
-\r
-# The prefix for a users personal repository directory.\r
-#\r
-# Personal user repositories are created in this directory, named by the user name\r
-# prefixed with the userRepositoryPrefix. For eaxmple, a user 'john' would have his\r
-# personal repositories in the directory '~john'.\r
-#\r
-# Cannot be an empty string. Also, absolute paths are changed to relative paths by \r
-# removing the first directory separator.\r
-#\r
-# It is not recommended to change this value AFTER your user's have created\r
-# personal repositories because it will break all permissions, ownership, and\r
-# repository push/pull operations. \r
-#\r
-# RESTART REQUIRED\r
-# SINCE 1.4.0\r
-git.userRepositoryPrefix = ~\r
-\r
-# The default incremental push tag prefix. Tag prefix applied to a repository\r
-# that has automatic push tags enabled and does not specify a custom tag prefix.\r
-#\r
-# If incremental push tags are enabled, the tips of each branch in the push will\r
-# be tagged with an increasing revision integer.\r
-#\r
-# e.g. refs/tags/r2345 or refs/tags/rev_2345 \r
-#\r
-# SINCE 1.3.0\r
-git.defaultIncrementalPushTagPrefix = r\r
-\r
-# Controls creating a repository as --shared on Unix servers.\r
-#\r
-# In an Unix environment where mixed access methods exist for shared repositories,\r
-# the repository should be created with 'git init --shared' to make sure that\r
-# it can be accessed e.g. via ssh (user git) and http (user www-data).\r
-#\r
-# Valid values are the values available for the '--shared' option. The the manual\r
-# page for 'git init' for more information on shared repositories.\r
-#\r
-# SINCE 1.4.0\r
-git.createRepositoriesShared = false\r
-\r
-# Directory for gitignore templates used during repository creation.\r
-#\r
-# SINCE 1.6.0\r
-git.gitignoreFolder = ${baseFolder}/gitignore\r
-\r
-# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!)\r
-#\r
-# USE AT YOUR OWN RISK!\r
-#\r
-# If enabled, the garbage collection executor scans all repositories once a day\r
-# at the hour of your choosing. The GC executor will take each repository "offline",\r
-# one-at-a-time, to check if the repository satisfies it's GC trigger requirements.\r
-#\r
-# While the repository is offline it will be inaccessible from the web UI or from\r
-# any of the other services (git, rpc, rss, etc).\r
-#\r
-# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block,\r
-# especially on Windows systems, so if you are using other tools please coordinate\r
-# their usage with your GC Executor schedule or do not use this feature.\r
-#\r
-# The GC algorithm complex and the JGit team advises caution when using their\r
-# young implementation of GC.\r
-#\r
-# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics\r
-#\r
-# EXPERIMENTAL\r
-# SINCE 1.2.0\r
-# RESTART REQUIRED\r
-git.enableGarbageCollection = false\r
-\r
-# Hour of the day for the GC Executor to scan repositories.\r
-# This value is in 24-hour time.\r
-#\r
-# SINCE 1.2.0\r
-git.garbageCollectionHour = 0\r
-\r
-# The default minimum total filesize of loose objects to trigger early garbage\r
-# collection.\r
-#\r
-# You may specify a custom threshold for a repository in the repository's settings.\r
-# Common unit suffixes of k, m, or g are supported.\r
-#\r
-# SINCE 1.2.0\r
-git.defaultGarbageCollectionThreshold = 500k\r
-\r
-# The default period, in days, between GCs for a repository. If the total filesize\r
-# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's\r
-# custom threshold, this period will be short-circuited. \r
-#\r
-# e.g. if a repository collects 100KB of loose objects every day with a 500KB\r
-# threshold and a period of 7 days, it will take 5 days for the loose objects to\r
-# be collected, packed, and pruned.\r
-#\r
-# OR\r
-#\r
-# if a repository collects 10KB of loose objects every day with a 500KB threshold\r
-# and a period of 7 days, it will take the full 7 days for the loose objects to be\r
-# collected, packed, and pruned.\r
-#\r
-# You may specify a custom period for a repository in the repository's settings.\r
-#\r
-# The minimum value is 1 day since the GC Executor only runs once a day.\r
-#\r
-# SINCE 1.2.0\r
-git.defaultGarbageCollectionPeriod = 7\r
-\r
-# Gitblit can automatically fetch ref updates for a properly configured mirror\r
-# repository.\r
-#\r
-# Requirements:\r
-# 1. you must manually clone the repository using native git\r
-# git clone --mirror git://somewhere.com/myrepo.git\r
-# 2. the "origin" remote must be the mirror source\r
-# 3. the "origin" repository must be accessible without authentication OR the\r
-# credentials must be embedded in the origin url (not recommended)\r
-#\r
-# Notes:\r
-# 1. "origin" SSH urls are untested and not likely to work\r
-# 2. mirrors cloned while Gitblit is running are likely to require clearing the\r
-# gitblit cache (link on the repositories page of an administrator account)\r
-# 3. Gitblit will automatically repair any invalid fetch refspecs with a "//"\r
-# sequence.\r
-#\r
-# SINCE 1.4.0\r
-# RESTART REQUIRED\r
-git.enableMirroring = false\r
-\r
-# Specify the period between update checks for mirrored repositories.\r
-# The shortest period you may specify between mirror update checks is 5 mins.\r
-#\r
-# SINCE 1.4.0\r
-# RESTART REQUIRED\r
-git.mirrorPeriod = 30 mins\r
-\r
-# Number of bytes of a pack file to load into memory in a single read operation.\r
-# This is the "page size" of the JGit buffer cache, used for all pack access\r
-# operations. All disk IO occurs as single window reads. Setting this too large\r
-# may cause the process to load more data than is required; setting this too small\r
-# may increase the frequency of read() system calls.\r
-#\r
-# Default on JGit is 8 KiB on all platforms.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitWindowSize = 8k\r
-\r
-# Maximum number of bytes to load and cache in memory from pack files. If JGit\r
-# needs to access more than this many bytes it will unload less frequently used\r
-# windows to reclaim memory space within the process. As this buffer must be shared\r
-# with the rest of the JVM heap, it should be a fraction of the total memory available.\r
-#\r
-# The JGit team recommends setting this value larger than the size of your biggest\r
-# repository. This ensures you can serve most requests from memory.\r
-#\r
-# Default on JGit is 10 MiB on all platforms.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitLimit = 10m\r
-\r
-# Maximum number of bytes to reserve for caching base objects that multiple deltafied\r
-# objects reference. By storing the entire decompressed base object in a cache Git\r
-# is able to avoid unpacking and decompressing frequently used base objects multiple times.\r
-#\r
-# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust\r
-# this value.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.deltaBaseCacheLimit = 10m\r
-\r
-# Maximum number of pack files to have open at once. A pack file must be opened\r
-# in order for any of its data to be available in a cached window.\r
-#\r
-# If you increase this to a larger setting you may need to also adjust the ulimit\r
-# on file descriptors for the host JVM, as Gitblit needs additional file descriptors\r
-# available for network sockets and other repository data manipulation.\r
-#\r
-# Default on JGit is 128 file descriptors on all platforms.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitOpenFiles = 128\r
-\r
-# Largest object size, in bytes, that JGit will allocate as a contiguous byte\r
-# array. Any file revision larger than this threshold will have to be streamed,\r
-# typically requiring the use of temporary files under $GIT_DIR/objects to implement\r
-# psuedo-random access during delta decompression.\r
-#\r
-# Servers with very high traffic should set this to be larger than the size of\r
-# their common big files. For example a server managing the Android platform\r
-# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable\r
-# setting in that environment. Setting this too high may cause the JVM to run out\r
-# of heap space when handling very big binary files, such as device firmware or\r
-# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly. \r
-#\r
-# Default is 50 MiB on all platforms.\r
-#\r
-# Common unit suffixes of k, m, or g are supported.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-#\r
-# NOTE: The importance of JGit's streamFileTreshold AND Git's bigFileThreshold\r
-# ISSUE: https://bugs.eclipse.org/bugs/show_bug.cgi?id=394078\r
-#\r
-# "core.bigFileThreshold \r
-#\r
-# Files larger than this size are stored deflated, without\r
-# attempting delta compression. Storing large files without\r
-# delta compression avoids excessive memory usage, at the\r
-# slight expense of increased disk usage.\r
-#\r
-# Default is 512 MiB on all platforms.\r
-# This should be reasonable for most projects as source code and other \r
-# text files can still be delta compressed, \r
-# but larger binary media files won't be."\r
-# -- Git documentation\r
-#\r
-# If streamFileTreshold < bigFileTreshold you _may_ spend alot of time waiting\r
-# for push and/or fetch to complete. It may even look hung.\r
-#\r
-# Until the issue is resolved gracefully, a workaround is to configure\r
-# bigFileThreshold < streamFileTreshold AND then repack the repository.\r
-#\r
-# e.g. from the repository folder with Gitblit NOT running:\r
-# git config core.bigFileTreshold 40m\r
-# git gc --aggressive\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.streamFileThreshold = 50m\r
-\r
-# When true, JGit will use mmap() rather than malloc()+read() to load data from\r
-# pack files. The use of mmap can be problematic on some JVMs as the garbage\r
-# collector must deduce that a memory mapped segment is no longer in use before\r
-# a call to munmap() can be made by the JVM native code.\r
-#\r
-# In server applications (such as Gitblit) that need to access many pack files,\r
-# setting this to true risks artificially running out of virtual address space, \r
-# as the garbage collector cannot reclaim unused mapped spaces fast enough.\r
-#\r
-# Default on JGit is false. Although potentially slower, it yields much more\r
-# predictable behavior.\r
-# Documentation courtesy of the Gerrit project.\r
-#\r
-# SINCE 1.0.0\r
-# RESTART REQUIRED\r
-git.packedGitMmap = false\r
-\r
-# Validate all received (pushed) objects are valid.\r
-#\r
-# SINCE 1.5.0\r
-git.checkReceivedObjects = true\r
-\r
-# Validate all referenced but not supplied objects are reachable.\r
-#\r
-# If enabled, Gitblit will verify that references to objects not contained\r
-# within the received pack are already reachable through at least one other\r
-# reference advertised to clients.\r
-#\r
-# This feature is useful when Gitblit doesn't trust the client to not provide a\r
-# forged SHA-1 reference to an object, in an attempt to access parts of the DAG\r
-# that they aren't allowed to see and which have been hidden from them via the\r
-# configured AdvertiseRefsHook or RefFilter.\r
-#\r
-# Enabling this feature may imply at least some, if not all, of the same functionality\r
-# performed by git.checkReceivedObjects. \r
-#\r
-# SINCE 1.5.0\r
-git.checkReferencedObjectsAreReachable = true\r
-\r
-# Set the maximum allowed Git object size.\r
-#\r
-# If an object is larger than the given size the pack-parsing will throw an exception\r
-# aborting the receive-pack operation. The default value, 0, disables maximum\r
-# object size checking.\r
-#\r
-# SINCE 1.5.0\r
-git.maxObjectSizeLimit = 0\r
-\r
-# Set the maximum allowed pack size.\r
-#\r
-# A pack exceeding this size will be rejected. The default value, -1, disables\r
-# maximum pack size checking.\r
-#\r
-# SINCE 1.5.0\r
-git.maxPackSizeLimit = -1\r
-\r
-# Use the Gitblit patch receive pack for processing contributions and tickets.\r
-# This allows the user to push a patch using the familiar Gerrit syntax:\r
-#\r
-# git push <remote> HEAD:refs/for/<targetBranch>\r
-#\r
-# NOTE:\r
-# This requires git.enableGitServlet = true AND it requires an authenticated\r
-# git transport connection (http/https) when pushing from a client.\r
-#\r
-# Valid services include:\r
-# com.gitblit.tickets.FileTicketService\r
-# com.gitblit.tickets.BranchTicketService\r
-# com.gitblit.tickets.RedisTicketService\r
-#\r
-# SINCE 1.4.0\r
-# RESTART REQUIRED\r
-tickets.service = \r
-\r
-# Globally enable or disable creation of new bug, enhancement, task, etc tickets\r
-# for all repositories.\r
-#\r
-# If false, no tickets can be created through the ui for any repositories.\r
-# If true, each repository can control if they allow new tickets to be created.\r
-#\r
-# NOTE:\r
-# If a repository is accepting patchsets, new proposal tickets can be created\r
-# regardless of this setting.\r
-#\r
-# SINCE 1.4.0\r
-tickets.acceptNewTickets = true\r
-\r
-# Globally enable or disable pushing patchsets to all repositories.\r
-#\r
-# If false, no patchsets will be accepted for any repositories.\r
-# If true, each repository can control if they accept new patchsets.\r
-#\r
-# NOTE:\r
-# If a repository is accepting patchsets, new proposal tickets can be created\r
-# regardless of the acceptNewTickets setting.\r
-#\r
-# SINCE 1.4.0\r
-tickets.acceptNewPatchsets = true\r
-\r
-# Default setting to control patchset merge through the web ui. If true, patchsets\r
-# must have an approval score to enable the merge button. This setting can be\r
-# overriden per-repository.\r
-#\r
-# SINCE 1.4.0\r
-tickets.requireApproval = false\r
-\r
-# The case-insensitive regular expression used to identify and close tickets on\r
-# push to the integration branch for commits that are NOT already referenced as\r
-# a patchset tip.\r
-#\r
-# SINCE 1.5.0\r
-tickets.closeOnPushCommitMessageRegex = (?:fixes|closes)[\\s-]+#?(\\d+)\r
-\r
-# Specify the location of the Lucene Ticket index\r
-#\r
-# SINCE 1.4.0\r
-# RESTART REQUIRED\r
-tickets.indexFolder = ${baseFolder}/tickets/lucene\r
-\r
-# Define the url for the Redis server.\r
-#\r
-# e.g. redis://localhost:6379\r
-# redis://:foobared@localhost:6379/2\r
-#\r
-# SINCE 1.4.0\r
-# RESTART REQUIRED\r
-tickets.redis.url =\r
-\r
-# The number of tickets to display on a page.\r
-#\r
-# SINCE 1.4.0\r
-tickets.perPage = 25\r
-\r
-# The folder where plugins are loaded from.\r
-#\r
-# SINCE 1.5.0\r
-# RESTART REQUIRED\r
-# BASEFOLDER\r
-plugins.folder = ${baseFolder}/plugins\r
-\r
-# The registry of available plugins.\r
-#\r
-# SINCE 1.5.0\r
-plugins.registry = http://plugins.gitblit.com/plugins.json\r
-\r
-# Number of threads used to handle miscellaneous tasks in the background.\r
-#\r
-# SINCE 1.6.0\r
-# RESTART REQUIRED\r
-execution.defaultThreadPoolSize = 1\r
-\r
-#\r
-# Groovy Integration\r
-#\r
-\r
-# Location of Groovy scripts to use for Pre and Post receive hooks.\r
-# Use forward slashes even on Windows!!\r
-# e.g. c:/groovy\r
-#\r
-# RESTART REQUIRED\r
-# SINCE 0.8.0\r
-# BASEFOLDER\r
-groovy.scriptsFolder = ${baseFolder}/groovy\r
-\r
-# Specify the directory Grape uses for downloading libraries.\r
-# http://groovy.codehaus.org/Grape\r
-#\r
-# RESTART REQUIRED\r
-# SINCE 1.0.0\r
-# BASEFOLDER\r
-groovy.grapeFolder = ${baseFolder}/groovy/grape\r
-\r
-# Scripts to execute on Pre-Receive.\r
-#\r
-# These scripts execute after an incoming push has been parsed and validated\r
-# but BEFORE the changes are applied to the repository. You might reject a\r
-# push in this script based on the repository and branch the push is attempting\r
-# to change.\r
-#\r
-# Script names are case-sensitive on case-sensitive file systems. You may omit\r
-# the traditional ".groovy" from this list if your file extension is ".groovy" \r
-#\r
-# NOTE:\r
-# These scripts are only executed when pushing to *Gitblit*, not to other Git\r
-# tooling you may be using. Also note that these scripts are shared between\r
-# repositories. These are NOT repository-specific scripts! Within the script\r
-# you may customize the control-flow for a specific repository by checking the\r
-# *repository* variable.\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.8.0\r
-groovy.preReceiveScripts =\r
-\r
-# Scripts to execute on Post-Receive.\r
-#\r
-# These scripts execute AFTER an incoming push has been applied to a repository.\r
-# You might trigger a continuous-integration build here or send a notification.\r
-#\r
-# Script names are case-sensitive on case-sensitive file systems. You may omit\r
-# the traditional ".groovy" from this list if your file extension is ".groovy" \r
-#\r
-# NOTE:\r
-# These scripts are only executed when pushing to *Gitblit*, not to other Git\r
-# tooling you may be using. Also note that these scripts are shared between\r
-# repositories. These are NOT repository-specific scripts! Within the script\r
-# you may customize the control-flow for a specific repository by checking the\r
-# *repository* variable.\r
-# \r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.8.0\r
-groovy.postReceiveScripts =\r
-\r
-# Repository custom fields for Groovy Hook mechanism\r
-#\r
-# List of key=label pairs of custom fields to prompt for in the Edit Repository\r
-# page. These keys are stored in the repository's git config file in the \r
-# section [gitblit "customFields"]. Key names are alphanumeric only. These\r
-# fields are intended to be used for the Groovy hook mechanism where a script\r
-# can adjust it's execution based on the custom fields stored in the repository\r
-# config.\r
-#\r
-# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.0.0\r
-groovy.customFields = \r
-\r
-#\r
-# Fanout Settings\r
-#\r
-\r
-# Fanout is a PubSub notification service that can be used by Sparkleshare\r
-# to eliminate repository change polling. The fanout service runs in a separate\r
-# thread on a separate port from the Gitblit http/https application.\r
-# This service is provided so that Sparkleshare may be used with Gitblit in\r
-# firewalled environments or where reliance on Sparkleshare's default notifications\r
-# server (notifications.sparkleshare.org) is unwanted.\r
-#\r
-# This service maintains an open socket connection from the client to the\r
-# Fanout PubSub service. This service may not work properly behind a proxy server. \r
-\r
-# Specify the interface for Fanout to bind it's service.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 1.2.1\r
-# RESTART REQUIRED\r
-fanout.bindInterface = \r
-\r
-# port for serving the Fanout PubSub service. <= 0 disables this service.\r
-# On Unix/Linux systems, ports < 1024 require root permissions.\r
-# Recommended value: 17000\r
-#\r
-# SINCE 1.2.1\r
-# RESTART REQUIRED\r
-fanout.port = 0\r
-\r
-# Use Fanout NIO service. If false, a multi-threaded socket service will be used.\r
-# Be advised, the socket implementation spawns a thread per connection plus the\r
-# connection acceptor thread. The NIO implementation is completely single-threaded.\r
-#\r
-# SINCE 1.2.1\r
-# RESTART REQUIRED\r
-fanout.useNio = true\r
-\r
-# Concurrent connection limit. <= 0 disables concurrent connection throttling.\r
-# If > 0, only the specified number of concurrent connections will be allowed\r
-# and all other connections will be rejected.\r
-#\r
-# SINCE 1.2.1\r
-# RESTART REQUIRED\r
-fanout.connectionLimit = 0\r
-\r
-#\r
-# Authentication Settings\r
-#\r
-\r
-# Require authentication to see everything but the admin pages\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.authenticateViewPages = false\r
-\r
-# If web.authenticateViewPages=true you may optionally require a client-side\r
-# basic authentication prompt instead of the standard form-based login. \r
-#\r
-# SINCE 1.3.0\r
-web.enforceHttpBasicAuthentication = false\r
-\r
-# Require admin authentication for the admin functions and pages\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.authenticateAdminPages = true\r
-\r
-# Allow Gitblit to store a cookie in the user's browser for automatic\r
-# authentication. The cookie is generated by the user service.\r
-#\r
-# SINCE 0.5.0\r
-web.allowCookieAuthentication = true\r
-\r
-# Allow deletion of non-empty repositories. This is enforced for all delete vectors.\r
-#\r
-# SINCE 1.6.0\r
-web.allowDeletingNonEmptyRepositories = true\r
-\r
-# Setting to include personal repositories in the main repositories list.\r
-#\r
-# SINCE 1.6.0\r
-web.includePersonalRepositories = false\r
-\r
-# Config file for storing project metadata\r
-#\r
-# SINCE 1.2.0\r
-# BASEFOLDER\r
-web.projectsFile = ${baseFolder}/projects.conf\r
-\r
-# Either the full path to a user config file (users.conf)\r
-# OR a fully qualified class name that implements the IUserService interface.\r
-#\r
-# Any custom user service implementation must have a public default constructor.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-# BASEFOLDER\r
-realm.userService = ${baseFolder}/users.conf\r
-\r
-# Ordered list of external authentication providers which will be used if\r
-# authentication against the local user service fails.\r
-#\r
-# Valid providers are:\r
-#\r
-# htpasswd\r
-# ldap\r
-# pam\r
-# redmine\r
-# salesforce\r
-# windows\r
-\r
-# e.g. realm.authenticationProviders = htpasswd windows\r
-#\r
-# SINCE 1.4.0\r
-# RESTART REQUIRED\r
-# SPACE-DELIMITED\r
-realm.authenticationProviders =\r
-\r
-# How to store passwords.\r
-# Valid values are plain, md5, or combined-md5. md5 is the hash of password.\r
-# combined-md5 is the hash of username.toLowerCase()+password.\r
-# Default is md5.\r
-#\r
-# SINCE 0.5.0 \r
-realm.passwordStorage = md5\r
-\r
-# Minimum valid length for a plain text password.\r
-# Default value is 5. Absolute minimum is 4.\r
-#\r
-# SINCE 0.5.0 \r
-realm.minPasswordLength = 5\r
-\r
-#\r
-# Gitblit Web Settings\r
-#\r
-# If blank Gitblit is displayed.\r
-#\r
-# SINCE 0.5.0\r
-web.siteName =\r
-\r
-# The canonical url of your Gitblit server to be used in repository url generation,\r
-# RSS feeds, and all embedded links in email and plugin-based notifications.\r
-#\r
-# If you are running Gitblit on a non-standard http port (i.e. not 80 and not 443)\r
-# then you must specify that port in this url otherwise your generated urls will be\r
-# incorrect.\r
-#\r
-# The hostname of this url will be extracted for SSH and GIT protocol repository\r
-# url generation.\r
-#\r
-# e.g. web.canonicalUrl = https://dev.gitblit.com\r
-# web.canonicalUrl = https://dev.gitblit.com:8443\r
-#\r
-# SINCE 1.4.0\r
-web.canonicalUrl = \r
-\r
-# You may specify a different logo image for the header but it must be 120x45px.\r
-# If the specified file does not exist, the default Gitblit logo will be used.\r
-#\r
-# SINCE 1.3.0\r
-# BASEFOLDER\r
-web.headerLogo = ${baseFolder}/logo.png\r
-\r
-# You may specify a different link URL for the logo image anchor.\r
-# If blank the Gitblit main page URL is used.\r
-#\r
-# SINCE 1.3.0\r
-# BASEFOLDER\r
-web.rootLink =\r
-\r
-# You may specify a custom header background CSS color. If unspecified, the\r
-# default color will be used.\r
-#\r
-# e.g. web.headerBackgroundColor = #002060\r
-#\r
-# SINCE 1.3.0\r
-web.headerBackgroundColor =\r
-\r
-# You may specify a custom header foreground CSS color. If unspecified, the\r
-# default color will be used.\r
-#\r
-# e.g. web.headerForegroundColor = white\r
-#\r
-# SINCE 1.3.0\r
-web.headerForegroundColor =\r
-\r
-# You may specify a custom header foreground hover CSS color. If unspecified, the\r
-# default color will be used.\r
-#\r
-# e.g. web.headerHoverColor = white\r
-#\r
-# SINCE 1.3.0\r
-web.headerHoverColor =\r
-\r
-# You may specify a custom header border CSS color. If unspecified, the default\r
-# color will be used.\r
-#\r
-# e.g. web.headerBorderColor = #002060\r
-#\r
-# SINCE 1.3.0\r
-web.headerBorderColor =\r
-\r
-# You may specify a custom header border CSS color. If unspecified, the default\r
-# color will be used.\r
-#\r
-# e.g. web.headerBorderFocusColor = #ff9900\r
-#\r
-# SINCE 1.3.0\r
-web.headerBorderFocusColor =\r
-\r
-# If *web.authenticateAdminPages*=true, users with "admin" role can create\r
-# repositories, create users, and edit repository metadata.\r
-#\r
-# If *web.authenticateAdminPages*=false, any user can execute the aforementioned\r
-# functions. \r
-#\r
-# SINCE 0.5.0 \r
-web.allowAdministration = true\r
-\r
-# Setting to disable rendering the top-level navigation header which includes\r
-# the login form, top-level links like dashboard, repositories, search, etc.\r
-# This setting is only useful if you plan to embed Gitblit within another page\r
-# or system.\r
-#\r
-# SINCE 1.4.0\r
-web.hideHeader = false\r
-\r
-# Allows rpc clients to list repositories and possibly manage or administer the \r
-# Gitblit server, if the authenticated account has administrator permissions.\r
-# See *web.enableRpcManagement* and *web.enableRpcAdministration*.\r
-#\r
-# SINCE 0.7.0 \r
-web.enableRpcServlet = true\r
-\r
-# Allows rpc clients to manage repositories and users of the Gitblit instance,\r
-# if the authenticated account has administrator permissions.\r
-# Requires *web.enableRpcServlet=true*.\r
-#\r
-# SINCE 0.7.0 \r
-web.enableRpcManagement = false\r
-\r
-# Allows rpc clients to control the server settings and monitor the health of this\r
-# this Gitblit instance, if the authenticated account has administrator permissions.\r
-# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*.\r
-#\r
-# SINCE 0.7.0 \r
-web.enableRpcAdministration = false\r
-\r
-# Full path to a configurable robots.txt file. With this file you can control\r
-# what parts of your Gitblit server respectable robots are allowed to traverse.\r
-# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html\r
-#\r
-# SINCE 1.0.0\r
-# BASEFOLDER\r
-web.robots.txt = ${baseFolder}/robots.txt\r
-\r
-# The number of minutes to cache a page in the browser since the last request.\r
-# The default value is 0 minutes. A value <= 0 disables all page caching which\r
-# is the default behavior for Gitblit <= 1.3.0.\r
-#\r
-# SINCE 1.3.1\r
-web.pageCacheExpires = 0\r
-\r
-# If true, the web ui layout will respond and adapt to the browser's dimensions.\r
-# if false, the web ui will use a 940px fixed-width layout.\r
-# http://twitter.github.com/bootstrap/scaffolding.html#responsive\r
-#\r
-# SINCE 1.0.0\r
-web.useResponsiveLayout = true\r
-\r
-# Allow Gravatar images to be displayed in Gitblit pages.\r
-#\r
-# SINCE 0.8.0\r
-web.allowGravatar = true\r
-\r
-# Allow dynamic zip downloads.\r
-#\r
-# SINCE 0.5.0 \r
-web.allowZipDownloads = true\r
-\r
-# If *web.allowZipDownloads=true* the following formats will be displayed for\r
-# download compressed archive links:\r
-#\r
-# zip = standard .zip\r
-# tar = standard tar format (preserves *nix permissions and symlinks)\r
-# gz = gz-compressed tar\r
-# xz = xz-compressed tar\r
-# bzip2 = bzip2-compressed tar\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.2.0\r
-web.compressedDownloads = zip gz\r
-\r
-# Allow optional Lucene integration. Lucene indexing is an opt-in feature.\r
-# A repository may specify branches to index with Lucene instead of using Git\r
-# commit traversal. There are scenarios where you may want to completely disable\r
-# Lucene indexing despite a repository specifying indexed branches. One such\r
-# scenario is on a resource-constrained federated Gitblit mirror.\r
-#\r
-# SINCE 0.9.0\r
-web.allowLuceneIndexing = true\r
-\r
-# Allows an authenticated user to create forks of a repository\r
-#\r
-# set this to false if you want to disable all fork controls on the web site\r
-#\r
-web.allowForking = true\r
-\r
-# Controls the length of shortened commit hash ids\r
-#\r
-# SINCE 1.2.0\r
-web.shortCommitIdLength = 6\r
-\r
-# Use Clippy (Flash solution) to provide a copy-to-clipboard button.\r
-# If false, a button with a more primitive JavaScript-based prompt box will\r
-# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative.\r
-#\r
-# SINCE 0.8.0\r
-web.allowFlashCopyToClipboard = true\r
-\r
-# Default maximum number of commits that a repository may contribute to the\r
-# activity page, regardless of the selected duration. This setting may be valuable\r
-# for an extremely busy server. This value may also be configed per-repository\r
-# in Edit Repository. 0 disables this throttle.\r
-#\r
-# SINCE 1.2.0\r
-web.maxActivityCommits = 0\r
-\r
-# Default number of entries to include in RSS Syndication links\r
-#\r
-# SINCE 0.5.0\r
-web.syndicationEntries = 25\r
-\r
-# Show the size of each repository on the repositories page.\r
-# This requires recursive traversal of each repository folder. This may be\r
-# non-performant on some operating systems and/or filesystems. \r
-#\r
-# SINCE 0.5.2\r
-web.showRepositorySizes = true\r
-\r
-# List of custom regex expressions that can be displayed in the Filters menu\r
-# of the Repositories and Activity pages. Keep them very simple because you\r
-# are likely to run into encoding issues if they are too complex.\r
-#\r
-# Use !!! to separate the filters \r
-#\r
-# SINCE 0.8.0\r
-web.customFilters =\r
-\r
-# Show federation registrations (without token) and the current pull status\r
-# to non-administrator users. \r
-#\r
-# SINCE 0.6.0\r
-web.showFederationRegistrations = false\r
-\r
-# This is the message displayed when *web.authenticateViewPages=true*.\r
-# This can point to a file with Markdown content.\r
-# Specifying "gitblit" uses the internal login message.\r
-#\r
-# SINCE 0.7.0\r
-# BASEFOLDER\r
-web.loginMessage = gitblit\r
-\r
-# This is the message displayed above the repositories table.\r
-# This can point to a file with Markdown content.\r
-# Specifying "gitblit" uses the internal welcome message.\r
-#\r
-# SINCE 0.5.0\r
-# BASEFOLDER\r
-web.repositoriesMessage = gitblit\r
-\r
-# Ordered list of charsets/encodings to use when trying to display a blob.\r
-# If empty, UTF-8 and ISO-8859-1 are used. The server's default charset\r
-# is always appended to the encoding list. If all encodings fail to cleanly\r
-# decode the blob content, UTF-8 will be used with the standard malformed\r
-# input/unmappable character replacement strings.\r
-# \r
-# SPACE-DELIMITED\r
-# SINCE 1.0.0\r
-web.blobEncodings = UTF-8 ISO-8859-1\r
-\r
-# Manually set the default timezone to be used by Gitblit for display in the \r
-# web ui. This value is independent of the JVM timezone. Specifying a blank\r
-# value will default to the JVM timezone.\r
-# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin\r
-#\r
-# SINCE 0.9.0\r
-# RESTART REQUIRED\r
-web.timezone =\r
-\r
-# Use the client timezone when formatting dates.\r
-# This uses AJAX to determine the browser's timezone and may require more\r
-# server overhead because a Wicket session is created. All Gitblit pages\r
-# attempt to be stateless, if possible.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.useClientTimezone = false\r
-\r
-# Time format\r
-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>\r
-#\r
-# SINCE 0.8.0\r
-web.timeFormat = HH:mm\r
-\r
-# Short date format\r
-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>\r
-#\r
-# SINCE 0.5.0\r
-web.datestampShortFormat = yyyy-MM-dd\r
-\r
-# Long date format\r
-#\r
-# SINCE 0.8.0\r
-web.datestampLongFormat = EEEE, MMMM d, yyyy\r
-\r
-# Long timestamp format\r
-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>\r
-#\r
-# SINCE 0.5.0\r
-web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z\r
-\r
-# Mount URL parameters\r
-# This setting controls if pretty or parameter URLs are used.\r
-# i.e.\r
-# if true:\r
-# http://localhost/commit/myrepo/abcdef\r
-# if false:\r
-# http://localhost/commit/?r=myrepo&h=abcdef\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.mountParameters = true\r
-\r
-# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding\r
-# in URLs as a security precaution for proxies. This setting tells Gitblit\r
-# to preemptively replace '/' with '*' or '!' for url string parameters.\r
-#\r
-# <https://issues.apache.org/jira/browse/WICKET-1303>\r
-# <http://tomcat.apache.org/security-6.html#Fixed_in_Apache_Tomcat_6.0.10>\r
-# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your\r
-# *CATALINA_OPTS* or to your JVM launch parameters\r
-#\r
-# SINCE 0.5.2\r
-web.forwardSlashCharacter = /\r
-\r
-# Show other URLs on the summary page for accessing your git repositories\r
-# Use spaces to separate urls.\r
-#\r
-# {0} is the token for the repository name\r
-# {1} is the token for the username\r
-#\r
-# The username is only practical if you have setup your other git serving\r
-# solutions accounts to have the same username as the Gitblit account.\r
-#\r
-# e.g.\r
-# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0} https://{1}@localhost/r/{0}\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.otherUrls = \r
-\r
-# Should app-specific clone links be displayed for SourceTree, SparkleShare, etc?\r
-#\r
-# SINCE 1.3.0\r
-web.allowAppCloneLinks = true\r
-\r
-# Choose how to present the repositories list.\r
-# grouped = group nested/subfolder repositories together (no sorting)\r
-# flat = flat list of repositories (sorting allowed)\r
-#\r
-# SINCE 0.5.0\r
-web.repositoryListType = grouped\r
-\r
-# If using a grouped repository list and there are repositories at the\r
-# root level of your repositories folder, you may specify the displayed\r
-# group name with this setting. This value is only used for web presentation.\r
-#\r
-# SINCE 0.5.0\r
-web.repositoryRootGroupName = main\r
-\r
-# Display the repository swatch color next to the repository name link in the \r
-# repositories list. \r
-#\r
-# SINCE 0.8.0\r
-web.repositoryListSwatches = true\r
-\r
-# Defines the default commit message renderer. This can be configured\r
-# per-repository.\r
-#\r
-# Valid values are: plain, markdown\r
-#\r
-# SINCE 1.4.0\r
-web.commitMessageRenderer = plain\r
-\r
-# Control if email addresses are shown in web ui\r
-#\r
-# SINCE 0.5.0\r
-web.showEmailAddresses = true\r
-\r
-# Shows a combobox in the page links header with commit, committer, and author\r
-# search selection. Default search is commit.\r
-#\r
-# SINCE 0.5.0\r
-web.showSearchTypeSelection = false\r
-\r
-# Controls display of activity graphs on the dashboard, activity, and summary\r
-# pages. Charting makes use of the external Google Charts API.\r
-#\r
-# SINCE 0.5.0 \r
-web.generateActivityGraph = true\r
-\r
-# Displays the commits branch graph in the summary page and commits/log page.\r
-#\r
-# SINCE 1.4.0\r
-web.showBranchGraph = true\r
-\r
-# The default number of days to show on the activity page.\r
-# Value must exceed 0 else default of 7 is used\r
-#\r
-# SINCE 0.8.0\r
-web.activityDuration = 7\r
-\r
-# Choices for days of activity to display.\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.3.0\r
-web.activityDurationChoices = 1 3 7 14 21 28\r
-\r
-# Maximum number of days of activity that may be displayed on the activity page.\r
-#\r
-# SINCE 1.3.2\r
-web.activityDurationMaximum = 30\r
-\r
-# The number of days of commits to cache in memory for the dashboard, activity,\r
-# and project pages. A value of 0 will disable all caching and will parse commits\r
-# in each repository per-request. If the value > 0 these pages will try to fulfill\r
-# requests using the commit cache. If the request specifies a period which falls\r
-# outside the commit cache window, then the cache will be ignored and the request\r
-# will be fulfilled by brute-force parsing all relevant commits per-repository.\r
-#\r
-# Consider the values specified for *web.activityDurationChoices* when setting\r
-# the cache size AND consider adjusting the JVM -Xmx heap parameter appropriately.\r
-#\r
-# SINCE 1.3.0\r
-# RESTART REQUIRED\r
-web.activityCacheDays = 14\r
-\r
-# Case-insensitive list of authors to exclude from metrics. Useful for\r
-# eliminating bots.\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.3.0\r
-web.metricAuthorExclusions =\r
-\r
-# The number of commits to display on the summary page\r
-# Value must exceed 0 else default of 20 is used\r
-#\r
-# SINCE 0.5.0\r
-web.summaryCommitCount = 16\r
-\r
-# The number of tags/branches to display on the summary page.\r
-# -1 = all tags/branches\r
-# 0 = hide tags/branches\r
-# N = N tags/branches\r
-#\r
-# SINCE 0.5.0\r
-web.summaryRefsCount = 5\r
-\r
-# Show a README file, if available, on the summary page.\r
-#\r
-# SINCE 1.4.0\r
-web.summaryShowReadme = false\r
-\r
-# The number of items to show on a page before showing the first, prev, next\r
-# pagination links. A default of 50 is used for any invalid value.\r
-#\r
-# SINCE 0.5.0\r
-web.itemsPerPage = 50\r
-\r
-# The number of reflog changes to display on the overview page\r
-# Value must exceed 0 else default of 5 is used\r
-#\r
-# SINCE 1.3.0\r
-web.overviewReflogCount = 5\r
-\r
-# The number of reflog changes to show on a reflog page before show the first,\r
-# prev, next pagination links. A default of 10 is used for any invalid value.\r
-#\r
-# SINCE 1.3.0\r
-web.reflogChangesPerPage = 10\r
-\r
-# Specify the names of documents in the root of your repository to be displayed\r
-# in tabs on your repository docs page. If the name is not found in the root\r
-# then no tab is added. The order specified is the order displayed. Do not\r
-# specify a file extension as the aggregation of markup extensions + txt are used\r
-# in the search algorithm.\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.4.0\r
-web.documents = readme home index changelog contributing submitting_patches copying license notice authors\r
-\r
-# Registered file extensions to ignore during Lucene indexing\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.9.0\r
-web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt pptx png so swf tar xcf xls xlsx zip\r
-\r
-# Registered extensions for google-code-prettify\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.prettyPrintExtensions = aea agc basic c cbm cl clj cpp cs css dart el erl erlang frm fs go groovy hs htm html java js latex lisp ll llvm lsp lua ml moxie mumps n nemerle pascal php pl pm prefs properties proto py r R rb rd Rd rkt s S scala scm sh Splus sql ss tcl tex vb vbs vhd vhdl wiki xml xq xquery yaml yml ymlapollo\r
-\r
-# Registered extensions for markdown transformation\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.5.0\r
-web.markdownExtensions = md mkd markdown MD MKD\r
-\r
-# Registered extensions for mediawiki transformation\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.4.0\r
-web.mediawikiExtensions = mw mediawiki\r
-\r
-# Registered extensions for twiki transformation\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.4.0\r
-web.twikiExtensions = twiki\r
-\r
-# Registered extensions for textile transformation\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.4.0\r
-web.textileExtensions = textile\r
-\r
-# Registered extensions for confluence transformation\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.4.0\r
-web.confluenceExtensions = confluence\r
-\r
-# Registered extensions for tracwiki transformation\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 1.4.0\r
-web.tracwikiExtensions = tracwiki\r
-\r
-# Image extensions\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.imageExtensions = bmp jpg gif png \r
-\r
-# Registered extensions for binary blobs\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.5.0\r
-web.binaryExtensions = 7z arc arj bin dll doc docx exe gz jar lib lzh odg odf odt pdf ppt pptx so tar xls xlsx zip\r
-\r
-# Aggressive heap management will run the garbage collector on every generated\r
-# page. This slows down page generation a little but improves heap consumption. \r
-#\r
-# SINCE 0.5.0\r
-web.aggressiveHeapManagement = false\r
-\r
-# Run the webapp in debug mode\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-web.debugMode = false\r
-\r
-# Force a default locale for all users, ignoring the browser's settings.\r
-# An empty value allows Gitblit to use the translation preferred by the browser.\r
-#\r
-# Changing this value while the server is running will only affect new sessions.\r
-#\r
-# e.g. web.forceDefaultLocale = en\r
-#\r
-# SINCE 1.3.0\r
-web.forceDefaultLocale = \r
-\r
-# Enable/disable global regex substitutions (i.e. shared across repositories)\r
-#\r
-# SINCE 0.5.0\r
-# DEPRECATED 1.4.0 (migrate to bugtraq instead)\r
-regex.global = true\r
-\r
-# Example global regex substitutions\r
-# Use !!! to separate the search pattern and the replace pattern\r
-# searchpattern!!!replacepattern\r
-# SINCE 0.5.0\r
-\r
-# regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://somehost/bug/$3">$3</a>\r
-# SINCE 0.5.0\r
-\r
-# Example Gerrit links\r
-# regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!Change-Id: <a href="http://somehost/r/#q,$2,n,z">$2</a>\r
-# regex.global.reviewedon = \\b(Reviewed-on:\\s*)([A-Za-z0-9:/\\.]*)\\b!!!Reviewed-on: <a href="$2">$2</a>\r
-\r
-# Example per-repository regex substitutions overrides global\r
-# SINCE 0.5.0\r
-# regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://elsewhere/bug/$3">$3</a>\r
-\r
-#\r
-# Mail Settings\r
-# SINCE 0.6.0\r
-#\r
-# Mail settings are used to notify administrators of received federation proposals\r
-#\r
-\r
-# ip or hostname of smtp server\r
-#\r
-# SINCE 0.6.0\r
-mail.server =\r
-\r
-# port to use for smtp requests\r
-#\r
-# SINCE 0.6.0\r
-mail.port = 25\r
-\r
-# debug the mail executor\r
-#\r
-# SINCE 0.6.0\r
-mail.debug = false\r
-\r
-# use SMTPs flag\r
-mail.smtps = false\r
-\r
-# use STARTTLS flag\r
-#\r
-# SINCE 1.6.0\r
-mail.starttls = false\r
-\r
-# if your smtp server requires authentication, supply the credentials here\r
-#\r
-# SINCE 0.6.0\r
-mail.username =\r
-# SINCE 0.6.0\r
-mail.password =\r
-\r
-# from address for generated emails\r
-#\r
-# SINCE 0.6.0\r
-mail.fromAddress = \r
-\r
-# List of email addresses for the Gitblit administrators\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.6.0\r
-mail.adminAddresses = \r
-\r
-# List of email addresses for sending push email notifications.\r
-#\r
-# This key currently requires use of the sendemail.groovy hook script.\r
-# If you set sendemail.groovy in *groovy.postReceiveScripts* then email\r
-# notifications for all repositories (regardless of access restrictions!)\r
-# will be sent to these addresses.\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 0.8.0\r
-mail.mailingLists =\r
-\r
-#\r
-# Federation Settings\r
-# SINCE 0.6.0\r
-#\r
-# A Gitblit federation is a way to backup one Gitblit instance to another.\r
-#\r
-# *git.enableGitServlet* must be true to use this feature.\r
-\r
-# Your federation name is used for federation status acknowledgments. If it is\r
-# unset, and you elect to send a status acknowledgment, your Gitblit instance\r
-# will be identified by its hostname, if available, else your internal ip address.\r
-# The source Gitblit instance will also append your external IP address to your\r
-# identification to differentiate multiple pulling systems behind a single proxy.\r
-#\r
-# SINCE 0.6.0\r
-federation.name =\r
-\r
-# Specify the passphrase of this Gitblit instance.\r
-#\r
-# An unspecified (empty) passphrase disables processing federation requests.\r
-#\r
-# This value can be anything you want: an integer, a sentence, an haiku, etc.\r
-# Keep the value simple, though, to avoid Java properties file encoding issues.\r
-#\r
-# Changing your passphrase will break any registrations you have established with other\r
-# Gitblit instances.\r
-#\r
-# CASE-SENSITIVE\r
-# SINCE 0.6.0\r
-# RESTART REQUIRED *(only to enable or disable federation)*\r
-federation.passphrase =\r
-\r
-# Control whether or not this Gitblit instance can receive federation proposals\r
-# from another Gitblit instance. Registering a federated Gitblit is a manual\r
-# process. Proposals help to simplify that process by allowing a remote Gitblit\r
-# instance to send your Gitblit instance the federation pull data.\r
-#\r
-# SINCE 0.6.0\r
-federation.allowProposals = false\r
-\r
-# The destination folder for cached federation proposals.\r
-# Use forward slashes even on Windows!!\r
-#\r
-# SINCE 0.6.0\r
-# BASEFOLDER\r
-federation.proposalsFolder = ${baseFolder}/proposals\r
-\r
-# The default pull frequency if frequency is unspecified on a registration\r
-#\r
-# SINCE 0.6.0\r
-federation.defaultFrequency = 60 mins\r
-\r
-# Federation Sets are named groups of repositories. The Federation Sets are \r
-# available for selection in the repository settings page. You can assign a\r
-# repository to one or more sets and then distribute the token for the set.\r
-# This allows you to grant federation pull access to a subset of your available\r
-# repositories. Tokens for federation sets only grant repository pull access.\r
-#\r
-# SPACE-DELIMITED\r
-# CASE-SENSITIVE\r
-# SINCE 0.6.0\r
-federation.sets = \r
-\r
-# Federation pull registrations\r
-# Registrations are read once, at startup.\r
-#\r
-# RESTART REQUIRED\r
-#\r
-# frequency:\r
-# The shortest frequency allowed is every 5 minutes\r
-# Decimal frequency values are cast to integers\r
-# Frequency values may be specified in mins, hours, or days\r
-# Values that can not be parsed or are unspecified default to *federation.defaultFrequency*\r
-#\r
-# folder:\r
-# if unspecified, the folder is *git.repositoriesFolder*\r
-# if specified, the folder is relative to *git.repositoriesFolder*\r
-#\r
-# bare:\r
-# if true, each repository will be created as a *bare* repository and will not\r
-# have a working directory.\r
-#\r
-# if false, each repository will be created as a normal repository suitable\r
-# for local work.\r
-#\r
-# mirror:\r
-# if true, each repository HEAD is reset to *origin/master* after each pull.\r
-# The repository will be flagged *isFrozen* after the initial clone.\r
-#\r
-# if false, each repository HEAD will point to the FETCH_HEAD of the initial\r
-# clone from the origin until pushed to or otherwise manipulated.\r
-#\r
-# mergeAccounts:\r
-# if true, remote accounts and their permissions are merged into your \r
-# users.properties file \r
-#\r
-# notifyOnError:\r
-# if true and the mail configuration is properly set, administrators will be\r
-# notified by email of pull failures\r
-#\r
-# include and exclude:\r
-# Space-delimited list of repositories to include or exclude from pull\r
-# may be * wildcard to include or exclude all\r
-# may use fuzzy match (e.g. org.eclipse.*)\r
-\r
-#\r
-# (Nearly) Perfect Mirror example\r
-#\r
-\r
-#federation.example1.url = https://go.gitblit.com\r
-#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4\r
-#federation.example1.frequency = 120 mins\r
-#federation.example1.folder =\r
-#federation.example1.bare = true \r
-#federation.example1.mirror = true \r
-#federation.example1.mergeAccounts = true\r
-\r
-#\r
-# Advanced Realm Settings\r
-#\r
-\r
-# Auto-creates user accounts based on the servlet container principal. This\r
-# assumes that your Gitblit install is a protected resource and your container's\r
-# authentication process intercepts all Gitblit requests.\r
-#\r
-# SINCE 1.3.0\r
-realm.container.autoCreateAccounts = false\r
-\r
-# Allow or prohibit Windows guest account logins\r
-#\r
-# SINCE 1.3.0\r
-realm.windows.allowGuests = false\r
-\r
-# Allow user accounts belonging to the BUILTIN\Administrators group to be\r
-# Gitblit administrators.\r
-#\r
-# SINCE 1.4.0\r
-realm.windows.permitBuiltInAdministrators = true\r
-\r
-# The default domain for authentication.\r
-#\r
-# If specified, this domain will be used for authentication UNLESS the supplied\r
-# login name manually specifies a domain (.e.g. mydomain\james or james@mydomain)\r
-#\r
-# If unspecified, the username must be specified in UPN format (name@domain).\r
-#\r
-# if "." (dot) is specified, ONLY the local account database will be used.\r
-#\r
-# SINCE 1.3.0\r
-realm.windows.defaultDomain =\r
-\r
-# The PAM service name for authentication.\r
-# default: system-auth\r
-#\r
-# SINCE 1.3.1\r
-realm.pam.serviceName = system-auth\r
-\r
-# The Apache htpasswd file that contains the users and passwords.\r
-# default: ${baseFolder}/htpasswd\r
-#\r
-# RESTART REQUIRED\r
-# BASEFOLDER\r
-# SINCE 1.3.2\r
-realm.htpasswd.userfile = ${baseFolder}/htpasswd\r
-\r
-# Restrict the Salesforce user to members of this org.\r
-# default: 0 (i.e. do not check the Org ID)\r
-#\r
-# SINCE 1.3.0\r
-realm.salesforce.orgId = 0\r
-\r
-# URL of the LDAP server.\r
-# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to\r
-# send StartTLS command.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.server = ldap://localhost\r
-\r
-# Login username for LDAP searches.\r
-# If this value is unspecified, anonymous LDAP login will be used.\r
-# \r
-# e.g. mydomain\\username\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.username = cn=Directory Manager\r
-\r
-# Login password for LDAP searches.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.password = password\r
-\r
-# Bind pattern for Authentication.\r
-# Allow to directly authenticate an user without LDAP Searches.\r
-# \r
-# e.g. CN=${username},OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain\r
-#\r
-# SINCE 1.5.0\r
-realm.ldap.bindpattern = \r
-\r
-\r
-# Delegate team membership control to LDAP.\r
-#\r
-# If true, team user memberships will be specified by LDAP groups. This will\r
-# disable team selection in Edit User and user selection in Edit Team.\r
-#\r
-# If false, LDAP will only be used for authentication and Gitblit will maintain\r
-# team memberships with the *realm.ldap.backingUserService*.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.maintainTeams = false\r
-\r
-# Root node for all LDAP users\r
-#\r
-# This is the root node from which subtree user searches will begin.\r
-# If blank, Gitblit will search ALL nodes.\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain\r
-\r
-# Filter criteria for LDAP users\r
-#\r
-# Query pattern to use when searching for a user account. This may be any valid \r
-# LDAP query expression, including the standard (&) and (|) operators.\r
-#\r
-# Variables may be injected via the ${variableName} syntax.\r
-# Recognized variables are:\r
-# ${username} - The text entered as the user name\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username}))\r
-\r
-# Root node for all LDAP groups to be used as Gitblit Teams\r
-#\r
-# This is the root node from which subtree team searches will begin.\r
-# If blank, Gitblit will search ALL nodes. \r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain\r
-\r
-# Filter criteria for LDAP groups\r
-#\r
-# Query pattern to use when searching for a team. This may be any valid \r
-# LDAP query expression, including the standard (&) and (|) operators.\r
-#\r
-# Variables may be injected via the ${variableName} syntax.\r
-# Recognized variables are:\r
-# ${username} - The text entered as the user name\r
-# ${dn} - The Distinguished Name of the user logged in\r
-#\r
-# All attributes from the LDAP User record are available. For example, if a user\r
-# has an attribute "fullName" set to "John", "(fn=${fullName})" will be \r
-# translated to "(fn=John)".\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn}))\r
-\r
-# Filter criteria for empty LDAP groups\r
-#\r
-# Query pattern to use when searching for an empty team. This may be any valid \r
-# LDAP query expression, including the standard (&) and (|) operators.\r
-#\r
-# default: (&(objectClass=group)(!(member=*)))\r
-# SINCE 1.4.0\r
-realm.ldap.groupEmptyMemberPattern = (&(objectClass=group)(!(member=*)))\r
-\r
-# LDAP users or groups that should be given administrator privileges.\r
-#\r
-# Teams are specified with a leading '@' character. Groups with spaces in the\r
-# name can be entered as "@team name". This setting only applies when using\r
-# LDAP to maintain team memberships.\r
-#\r
-# e.g. realm.ldap.admins = john @git_admins "@git admins"\r
-#\r
-# SPACE-DELIMITED\r
-# SINCE 1.0.0\r
-realm.ldap.admins = @Git_Admins\r
-\r
-# Attribute(s) on the USER record that indicate their display (or full) name.\r
-# Leave blank for no mapping available in LDAP.\r
-#\r
-# This may be a single attribute, or a string of multiple attributes. Examples:\r
-# displayName - Uses the attribute 'displayName' on the user record\r
-# ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3 \r
-# attributes together, with a '.' after personalTitle\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.displayName = displayName\r
-\r
-# Attribute(s) on the USER record that indicate their email address.\r
-# Leave blank for no mapping available in LDAP.\r
-#\r
-# This may be a single attribute, or a string of multiple attributes. Examples:\r
-# email - Uses the attribute 'email' on the user record\r
-# ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes\r
-# together with a '.' and '@' creating something like first.last@gitblit.com \r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.email = email\r
-\r
-# Attribute on the USER record that indicate their username to be used in gitblit\r
-# when synchronizing users from LDAP\r
-# if blank, Gitblit will use uid\r
-# For MS Active Directory this may be sAMAccountName\r
-#\r
-# SINCE 1.0.0\r
-realm.ldap.uid = uid\r
-\r
-# Defines whether to synchronize all LDAP users and teams into the user service\r
-#\r
-# Valid values: true, false\r
-# If left blank, false is assumed\r
-#\r
-# SINCE 1.4.0\r
-realm.ldap.synchronize = false\r
-\r
-# Defines the period to be used when synchronizing users and teams from ldap.\r
-#\r
-# Must be of the form '<long> <TimeUnit>' where <TimeUnit> is one of 'MILLISECONDS', 'SECONDS', 'MINUTES', 'HOURS', 'DAYS' \r
-\r
-# default: 5 MINUTES\r
-#\r
-# RESTART REQUIRED\r
-# SINCE 1.4.0\r
-realm.ldap.syncPeriod = 5 MINUTES\r
-\r
-# Defines whether to delete non-existent LDAP users from the user service\r
-# during synchronization. depends on realm.ldap.synchronize = true\r
-#\r
-# Valid values: true, false\r
-# If left blank, true is assumed\r
-#\r
-# SINCE 1.4.0\r
-realm.ldap.removeDeletedUsers = true\r
-\r
-# URL of the Redmine.\r
-#\r
-# SINCE 1.2.0\r
-realm.redmine.url = http://example.com/redmine\r
-\r
-#\r
-# Gitblit GO Server Settings\r
-# The following settings only affect the integrated GO variant.\r
-#\r
-\r
-# The temporary folder to decompress the embedded gitblit webapp. \r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-# BASEFOLDER\r
-server.tempFolder = ${baseFolder}/temp\r
-\r
-# Specify the maximum number of concurrent http/https Jetty worker\r
-# threads to allow. This setting does not affect other threaded\r
-# daemons and components of Gitblit.\r
-#\r
-# SINCE 1.3.0\r
-# RESTART REQUIRED\r
-server.threadPoolSize = 50\r
-\r
-# Context path for the GO application. You might want to change the context\r
-# path if running Gitblit behind a proxy layer such as mod_proxy.\r
-#\r
-# SINCE 0.7.0\r
-# RESTART REQUIRED\r
-server.contextPath = /\r
-\r
-# Standard http port to serve. <= 0 disables this connector.\r
-# On Unix/Linux systems, ports < 1024 require root permissions.\r
-# Recommended value: 80 or 8080\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpPort = 0\r
-\r
-# Secure/SSL https port to serve. <= 0 disables this connector.\r
-# On Unix/Linux systems, ports < 1024 require root permissions.\r
-# Recommended value: 443 or 8443\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpsPort = 8443\r
-\r
-# Automatically redirect http requests to the secure https connector.\r
-#\r
-# This setting requires that you have configured server.httpPort and server.httpsPort.\r
-# Unless you are on a private LAN where you trust all client connections, it is\r
-# recommended to use https for all communications.\r
-#\r
-# SINCE 1.4.0\r
-# RESTART REQUIRED\r
-server.redirectToHttpsPort = false\r
-\r
-# Specify the interface for Jetty to bind the standard connector.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpBindInterface =\r
-\r
-# Specify the interface for Jetty to bind the secure connector.\r
-# You may specify an ip or an empty value to bind to all interfaces.\r
-# Specifying localhost will result in Gitblit ONLY listening to requests to\r
-# localhost.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.httpsBindInterface =\r
-\r
-# Alias of certificate to use for https/SSL serving. If blank the first\r
-# certificate found in the keystore will be used. \r
-#\r
-# SINCE 1.2.0\r
-# RESTART REQUIRED\r
-server.certificateAlias = localhost\r
-\r
-# Password for SSL keystore.\r
-# Keystore password and certificate password must match.\r
-# This is provided for convenience, its probably more secure to set this value\r
-# using the --storePassword command line parameter.\r
-#\r
-# If you are using the official JRE or JDK from Oracle you may not have the\r
-# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM. Because\r
-# of this, your store/key password can not exceed 7 characters. If you require\r
-# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction\r
-# Policy files from Oracle.\r
-#\r
-# http://www.oracle.com/technetwork/java/javase/downloads/index.html\r
-#\r
-# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited\r
-# Strength encryption is available.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.storePassword = gitblit\r
-\r
-# If serving over https (recommended) you might consider requiring clients to\r
-# authenticate with ssl certificates. If enabled, only https clients with the\r
-# a valid client certificate will be able to access Gitblit.\r
-#\r
-# If disabled, client certificate authentication is optional and will be tried\r
-# first before falling-back to form authentication or basic authentication.\r
-#\r
-# Requiring client certificates to access any of Gitblit may be too extreme,\r
-# consider this carefully.\r
-#\r
-# SINCE 1.2.0\r
-# RESTART REQUIRED\r
-server.requireClientCertificates = false\r
-\r
-# Port for shutdown monitor to listen on.\r
-#\r
-# SINCE 0.5.0\r
-# RESTART REQUIRED\r
-server.shutdownPort = 8081\r
+#
+# Gitblit Settings
+#
+
+# This settings file supports parameterization from the command-line for the
+# following command-line parameters:
+#
+# --baseFolder ${baseFolder} SINCE 1.2.1
+#
+# Settings that support ${baseFolder} parameter substitution are indicated with the
+# BASEFOLDER attribute. If the --baseFolder argument is unspecified, ${baseFolder}
+# and it's trailing / will be discarded from the setting value leaving a relative
+# path that is equivalent to pre-1.2.1 releases.
+#
+# e.g. "${baseFolder}/git" becomes "git", if --baseFolder is unspecified
+#
+# Git Servlet Settings
+#
+
+# Base folder for repositories.
+# This folder may contain bare and non-bare repositories but Gitblit will only
+# allow you to push to bare repositories.
+# Use forward slashes even on Windows!!
+# e.g. c:/gitrepos
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+git.repositoriesFolder = ${baseFolder}/git
+
+# Build the available repository list at startup and cache this list for reuse.
+# This reduces disk io when presenting the repositories page, responding to rpcs,
+# etc, but it means that Gitblit will not automatically identify repositories
+# added or deleted by external tools.
+#
+# For this case you can use curl, wget, etc to issue an rpc request to clear the
+# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE)
+#
+# SINCE 1.1.0
+git.cacheRepositoryList = true
+
+# Search the repositories folder subfolders for other repositories.
+# Repositories MAY NOT be nested (i.e. one repository within another)
+# but they may be grouped together in subfolders.
+# e.g. c:/gitrepos/libraries/mylibrary.git
+# c:/gitrepos/libraries/myotherlibrary.git
+#
+# SINCE 0.5.0
+git.searchRepositoriesSubfolders = true
+
+# Maximum number of folders to recurse into when searching for repositories.
+# The default value, -1, disables depth limits.
+#
+# SINCE 1.1.0
+git.searchRecursionDepth = -1
+
+# List of regex exclusion patterns to match against folders found in
+# *git.repositoriesFolder*.
+# Use forward slashes even on Windows!!
+# e.g. test/jgit\.git
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.searchExclusions =
+
+# List of regex url patterns for extracting a repository name when locating
+# submodules.
+# e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract
+# *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git*
+# If no matches are found then the submodule repository name is assumed to be
+# whatever trails the last / character. (e.g. gitblit.git).
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.submoduleUrlPatterns = .*?://github.com/(.*)
+
+# Specify the interface for Git Daemon to bind it's service.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+git.daemonBindInterface =
+
+# port for serving the Git Daemon service. <= 0 disables this service.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 9418
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+git.daemonPort = 9418
+
+# The port for serving the SSH service. <= 0 disables this service.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 29418
+#
+# SINCE 1.5.0
+# RESTART REQUIRED
+git.sshPort = 29418
+
+# Specify the interface for the SSH daemon to bind its service.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 1.5.0
+# RESTART REQUIRED
+git.sshBindInterface =
+
+# Specify the SSH key manager to use for retrieving, storing, and removing
+# SSH keys.
+#
+# Valid key managers are:
+# com.gitblit.transport.ssh.FileKeyManager
+#
+# SINCE 1.5.0
+git.sshKeysManager = com.gitblit.transport.ssh.FileKeyManager
+
+# Directory for storing user SSH keys when using the FileKeyManager.
+#
+# SINCE 1.5.0
+git.sshKeysFolder= ${baseFolder}/ssh
+
+# SSH backend NIO2|MINA.
+#
+# The Apache Mina project recommends using the NIO2 backend.
+#
+# SINCE 1.5.0
+git.sshBackend = NIO2
+
+# Number of threads used to parse a command line submitted by a client over SSH
+# for execution, create the internal data structures used by that command,
+# and schedule it for execution on another thread.
+#
+# SINCE 1.5.0
+git.sshCommandStartThreads = 2
+
+
+# Allow push/pull over http/https with JGit servlet.
+# If you do NOT want to allow Git clients to clone/push to Gitblit set this
+# to false. You might want to do this if you are only using ssh:// or git://.
+# If you set this false, consider changing the *web.otherUrls* setting to
+# indicate your clone/push urls.
+#
+# SINCE 0.5.0
+git.enableGitServlet = true
+
+# If you want to restrict all git servlet access to those with valid X509 client
+# certificates then set this value to true.
+#
+# SINCE 1.2.0
+git.requiresClientCertificate = false
+
+# Enforce date checks on client certificates to ensure that they are not being
+# used prematurely and that they have not expired.
+#
+# SINCE 1.2.0
+git.enforceCertificateValidity = true
+
+# List of OIDs to extract from a client certificate DN to map a certificate to
+# an account username.
+#
+# e.g. git.certificateUsernameOIDs = CN
+# e.g. git.certificateUsernameOIDs = FirstName LastName
+#
+# SPACE-DELIMITED
+# SINCE 1.2.0
+git.certificateUsernameOIDs = CN
+
+# Only serve/display bare repositories.
+# If there are non-bare repositories in git.repositoriesFolder and this setting
+# is true, they will be excluded from the ui.
+#
+# SINCE 0.9.0
+git.onlyAccessBareRepositories = false
+
+
+# Specify the list of acceptable transports for pushes.
+# If this setting is empty, all transports are acceptable.
+#
+# Valid choices are: GIT HTTP HTTPS SSH
+#
+# SINCE 1.5.0
+# SPACE-DELIMITED
+git.acceptedPushTransports = HTTP HTTPS SSH
+
+# Allow an authenticated user to create a destination repository on a push if
+# the repository does not already exist.
+#
+# Administrator accounts can create a repository in any project.
+# These repositories are created with the default access restriction and authorization
+# control values. The pushing account is set as the owner.
+#
+# Non-administrator accounts with the CREATE role may create personal repositories.
+# These repositories are created as VIEW restricted for NAMED users.
+# The pushing account is set as the owner.
+#
+# SINCE 1.2.0
+git.allowCreateOnPush = true
+
+# Global setting to control anonymous pushes.
+#
+# This setting allows/rejects anonymous pushes at the level of the receive pack.
+# This trumps all repository config settings. While anonymous pushes are convenient
+# on your own box when you are a lone developer, they are not recommended for
+# any multi-user installation where accountability is required. Since Gitblit
+# tracks pushes and user accounts, allowing anonymous pushes compromises that
+# information.
+#
+# SINCE 1.4.0
+git.allowAnonymousPushes = false
+
+# The default access restriction for new repositories.
+# Valid values are NONE, PUSH, CLONE, VIEW
+# NONE = anonymous view, clone, & push
+# PUSH = anonymous view & clone and authenticated push
+# CLONE = anonymous view, authenticated clone & push
+# VIEW = authenticated view, clone, & push
+#
+# SINCE 1.0.0
+git.defaultAccessRestriction = PUSH
+
+# The default authorization control for new repositories.
+# Valid values are AUTHENTICATED and NAMED
+# AUTHENTICATED = any authenticated user is granted restricted access
+# NAMED = only named users/teams are granted restricted access
+#
+# SINCE 1.1.0
+git.defaultAuthorizationControl = NAMED
+
+# The prefix for a users personal repository directory.
+#
+# Personal user repositories are created in this directory, named by the user name
+# prefixed with the userRepositoryPrefix. For eaxmple, a user 'john' would have his
+# personal repositories in the directory '~john'.
+#
+# Cannot be an empty string. Also, absolute paths are changed to relative paths by
+# removing the first directory separator.
+#
+# It is not recommended to change this value AFTER your user's have created
+# personal repositories because it will break all permissions, ownership, and
+# repository push/pull operations.
+#
+# RESTART REQUIRED
+# SINCE 1.4.0
+git.userRepositoryPrefix = ~
+
+# The default incremental push tag prefix. Tag prefix applied to a repository
+# that has automatic push tags enabled and does not specify a custom tag prefix.
+#
+# If incremental push tags are enabled, the tips of each branch in the push will
+# be tagged with an increasing revision integer.
+#
+# e.g. refs/tags/r2345 or refs/tags/rev_2345
+#
+# SINCE 1.3.0
+git.defaultIncrementalPushTagPrefix = r
+
+# Controls creating a repository as --shared on Unix servers.
+#
+# In an Unix environment where mixed access methods exist for shared repositories,
+# the repository should be created with 'git init --shared' to make sure that
+# it can be accessed e.g. via ssh (user git) and http (user www-data).
+#
+# Valid values are the values available for the '--shared' option. The the manual
+# page for 'git init' for more information on shared repositories.
+#
+# SINCE 1.4.0
+git.createRepositoriesShared = false
+
+# Directory for gitignore templates used during repository creation.
+#
+# SINCE 1.6.0
+git.gitignoreFolder = ${baseFolder}/gitignore
+
+# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!)
+#
+# USE AT YOUR OWN RISK!
+#
+# If enabled, the garbage collection executor scans all repositories once a day
+# at the hour of your choosing. The GC executor will take each repository "offline",
+# one-at-a-time, to check if the repository satisfies it's GC trigger requirements.
+#
+# While the repository is offline it will be inaccessible from the web UI or from
+# any of the other services (git, rpc, rss, etc).
+#
+# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block,
+# especially on Windows systems, so if you are using other tools please coordinate
+# their usage with your GC Executor schedule or do not use this feature.
+#
+# The GC algorithm complex and the JGit team advises caution when using their
+# young implementation of GC.
+#
+# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics
+#
+# EXPERIMENTAL
+# SINCE 1.2.0
+# RESTART REQUIRED
+git.enableGarbageCollection = false
+
+# Hour of the day for the GC Executor to scan repositories.
+# This value is in 24-hour time.
+#
+# SINCE 1.2.0
+git.garbageCollectionHour = 0
+
+# The default minimum total filesize of loose objects to trigger early garbage
+# collection.
+#
+# You may specify a custom threshold for a repository in the repository's settings.
+# Common unit suffixes of k, m, or g are supported.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionThreshold = 500k
+
+# The default period, in days, between GCs for a repository. If the total filesize
+# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's
+# custom threshold, this period will be short-circuited.
+#
+# e.g. if a repository collects 100KB of loose objects every day with a 500KB
+# threshold and a period of 7 days, it will take 5 days for the loose objects to
+# be collected, packed, and pruned.
+#
+# OR
+#
+# if a repository collects 10KB of loose objects every day with a 500KB threshold
+# and a period of 7 days, it will take the full 7 days for the loose objects to be
+# collected, packed, and pruned.
+#
+# You may specify a custom period for a repository in the repository's settings.
+#
+# The minimum value is 1 day since the GC Executor only runs once a day.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionPeriod = 7
+
+# Gitblit can automatically fetch ref updates for a properly configured mirror
+# repository.
+#
+# Requirements:
+# 1. you must manually clone the repository using native git
+# git clone --mirror git://somewhere.com/myrepo.git
+# 2. the "origin" remote must be the mirror source
+# 3. the "origin" repository must be accessible without authentication OR the
+# credentials must be embedded in the origin url (not recommended)
+#
+# Notes:
+# 1. "origin" SSH urls are untested and not likely to work
+# 2. mirrors cloned while Gitblit is running are likely to require clearing the
+# gitblit cache (link on the repositories page of an administrator account)
+# 3. Gitblit will automatically repair any invalid fetch refspecs with a "//"
+# sequence.
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+git.enableMirroring = false
+
+# Specify the period between update checks for mirrored repositories.
+# The shortest period you may specify between mirror update checks is 5 mins.
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+git.mirrorPeriod = 30 mins
+
+# Number of bytes of a pack file to load into memory in a single read operation.
+# This is the "page size" of the JGit buffer cache, used for all pack access
+# operations. All disk IO occurs as single window reads. Setting this too large
+# may cause the process to load more data than is required; setting this too small
+# may increase the frequency of read() system calls.
+#
+# Default on JGit is 8 KiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitWindowSize = 8k
+
+# Maximum number of bytes to load and cache in memory from pack files. If JGit
+# needs to access more than this many bytes it will unload less frequently used
+# windows to reclaim memory space within the process. As this buffer must be shared
+# with the rest of the JVM heap, it should be a fraction of the total memory available.
+#
+# The JGit team recommends setting this value larger than the size of your biggest
+# repository. This ensures you can serve most requests from memory.
+#
+# Default on JGit is 10 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitLimit = 10m
+
+# Maximum number of bytes to reserve for caching base objects that multiple deltafied
+# objects reference. By storing the entire decompressed base object in a cache Git
+# is able to avoid unpacking and decompressing frequently used base objects multiple times.
+#
+# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust
+# this value.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.deltaBaseCacheLimit = 10m
+
+# Maximum number of pack files to have open at once. A pack file must be opened
+# in order for any of its data to be available in a cached window.
+#
+# If you increase this to a larger setting you may need to also adjust the ulimit
+# on file descriptors for the host JVM, as Gitblit needs additional file descriptors
+# available for network sockets and other repository data manipulation.
+#
+# Default on JGit is 128 file descriptors on all platforms.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitOpenFiles = 128
+
+# Largest object size, in bytes, that JGit will allocate as a contiguous byte
+# array. Any file revision larger than this threshold will have to be streamed,
+# typically requiring the use of temporary files under $GIT_DIR/objects to implement
+# psuedo-random access during delta decompression.
+#
+# Servers with very high traffic should set this to be larger than the size of
+# their common big files. For example a server managing the Android platform
+# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable
+# setting in that environment. Setting this too high may cause the JVM to run out
+# of heap space when handling very big binary files, such as device firmware or
+# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly.
+#
+# Default is 50 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+#
+# NOTE: The importance of JGit's streamFileTreshold AND Git's bigFileThreshold
+# ISSUE: https://bugs.eclipse.org/bugs/show_bug.cgi?id=394078
+#
+# "core.bigFileThreshold
+#
+# Files larger than this size are stored deflated, without
+# attempting delta compression. Storing large files without
+# delta compression avoids excessive memory usage, at the
+# slight expense of increased disk usage.
+#
+# Default is 512 MiB on all platforms.
+# This should be reasonable for most projects as source code and other
+# text files can still be delta compressed,
+# but larger binary media files won't be."
+# -- Git documentation
+#
+# If streamFileTreshold < bigFileTreshold you _may_ spend alot of time waiting
+# for push and/or fetch to complete. It may even look hung.
+#
+# Until the issue is resolved gracefully, a workaround is to configure
+# bigFileThreshold < streamFileTreshold AND then repack the repository.
+#
+# e.g. from the repository folder with Gitblit NOT running:
+# git config core.bigFileTreshold 40m
+# git gc --aggressive
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.streamFileThreshold = 50m
+
+# When true, JGit will use mmap() rather than malloc()+read() to load data from
+# pack files. The use of mmap can be problematic on some JVMs as the garbage
+# collector must deduce that a memory mapped segment is no longer in use before
+# a call to munmap() can be made by the JVM native code.
+#
+# In server applications (such as Gitblit) that need to access many pack files,
+# setting this to true risks artificially running out of virtual address space,
+# as the garbage collector cannot reclaim unused mapped spaces fast enough.
+#
+# Default on JGit is false. Although potentially slower, it yields much more
+# predictable behavior.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitMmap = false
+
+# Validate all received (pushed) objects are valid.
+#
+# SINCE 1.5.0
+git.checkReceivedObjects = true
+
+# Validate all referenced but not supplied objects are reachable.
+#
+# If enabled, Gitblit will verify that references to objects not contained
+# within the received pack are already reachable through at least one other
+# reference advertised to clients.
+#
+# This feature is useful when Gitblit doesn't trust the client to not provide a
+# forged SHA-1 reference to an object, in an attempt to access parts of the DAG
+# that they aren't allowed to see and which have been hidden from them via the
+# configured AdvertiseRefsHook or RefFilter.
+#
+# Enabling this feature may imply at least some, if not all, of the same functionality
+# performed by git.checkReceivedObjects.
+#
+# SINCE 1.5.0
+git.checkReferencedObjectsAreReachable = true
+
+# Set the maximum allowed Git object size.
+#
+# If an object is larger than the given size the pack-parsing will throw an exception
+# aborting the receive-pack operation. The default value, 0, disables maximum
+# object size checking.
+#
+# SINCE 1.5.0
+git.maxObjectSizeLimit = 0
+
+# Set the maximum allowed pack size.
+#
+# A pack exceeding this size will be rejected. The default value, -1, disables
+# maximum pack size checking.
+#
+# SINCE 1.5.0
+git.maxPackSizeLimit = -1
+
+# Use the Gitblit patch receive pack for processing contributions and tickets.
+# This allows the user to push a patch using the familiar Gerrit syntax:
+#
+# git push <remote> HEAD:refs/for/<targetBranch>
+#
+# NOTE:
+# This requires git.enableGitServlet = true AND it requires an authenticated
+# git transport connection (http/https) when pushing from a client.
+#
+# Valid services include:
+# com.gitblit.tickets.FileTicketService
+# com.gitblit.tickets.BranchTicketService
+# com.gitblit.tickets.RedisTicketService
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+tickets.service =
+
+# Globally enable or disable creation of new bug, enhancement, task, etc tickets
+# for all repositories.
+#
+# If false, no tickets can be created through the ui for any repositories.
+# If true, each repository can control if they allow new tickets to be created.
+#
+# NOTE:
+# If a repository is accepting patchsets, new proposal tickets can be created
+# regardless of this setting.
+#
+# SINCE 1.4.0
+tickets.acceptNewTickets = true
+
+# Globally enable or disable pushing patchsets to all repositories.
+#
+# If false, no patchsets will be accepted for any repositories.
+# If true, each repository can control if they accept new patchsets.
+#
+# NOTE:
+# If a repository is accepting patchsets, new proposal tickets can be created
+# regardless of the acceptNewTickets setting.
+#
+# SINCE 1.4.0
+tickets.acceptNewPatchsets = true
+
+# Default setting to control patchset merge through the web ui. If true, patchsets
+# must have an approval score to enable the merge button. This setting can be
+# overriden per-repository.
+#
+# SINCE 1.4.0
+tickets.requireApproval = false
+
+# The case-insensitive regular expression used to identify and close tickets on
+# push to the integration branch for commits that are NOT already referenced as
+# a patchset tip.
+#
+# SINCE 1.5.0
+tickets.closeOnPushCommitMessageRegex = (?:fixes|closes)[\\s-]+#?(\\d+)
+
+# Specify the location of the Lucene Ticket index
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+tickets.indexFolder = ${baseFolder}/tickets/lucene
+
+# Define the url for the Redis server.
+#
+# e.g. redis://localhost:6379
+# redis://:foobared@localhost:6379/2
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+tickets.redis.url =
+
+# The number of tickets to display on a page.
+#
+# SINCE 1.4.0
+tickets.perPage = 25
+
+# The folder where plugins are loaded from.
+#
+# SINCE 1.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+plugins.folder = ${baseFolder}/plugins
+
+# The registry of available plugins.
+#
+# SINCE 1.5.0
+plugins.registry = http://plugins.gitblit.com/plugins.json
+
+# Number of threads used to handle miscellaneous tasks in the background.
+#
+# SINCE 1.6.0
+# RESTART REQUIRED
+execution.defaultThreadPoolSize = 1
+
+#
+# Groovy Integration
+#
+
+# Location of Groovy scripts to use for Pre and Post receive hooks.
+# Use forward slashes even on Windows!!
+# e.g. c:/groovy
+#
+# RESTART REQUIRED
+# SINCE 0.8.0
+# BASEFOLDER
+groovy.scriptsFolder = ${baseFolder}/groovy
+
+# Specify the directory Grape uses for downloading libraries.
+# http://groovy.codehaus.org/Grape
+#
+# RESTART REQUIRED
+# SINCE 1.0.0
+# BASEFOLDER
+groovy.grapeFolder = ${baseFolder}/groovy/grape
+
+# Scripts to execute on Pre-Receive.
+#
+# These scripts execute after an incoming push has been parsed and validated
+# but BEFORE the changes are applied to the repository. You might reject a
+# push in this script based on the repository and branch the push is attempting
+# to change.
+#
+# Script names are case-sensitive on case-sensitive file systems. You may omit
+# the traditional ".groovy" from this list if your file extension is ".groovy"
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using. Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts! Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.preReceiveScripts =
+
+# Scripts to execute on Post-Receive.
+#
+# These scripts execute AFTER an incoming push has been applied to a repository.
+# You might trigger a continuous-integration build here or send a notification.
+#
+# Script names are case-sensitive on case-sensitive file systems. You may omit
+# the traditional ".groovy" from this list if your file extension is ".groovy"
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using. Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts! Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.postReceiveScripts =
+
+# Repository custom fields for Groovy Hook mechanism
+#
+# List of key=label pairs of custom fields to prompt for in the Edit Repository
+# page. These keys are stored in the repository's git config file in the
+# section [gitblit "customFields"]. Key names are alphanumeric only. These
+# fields are intended to be used for the Groovy hook mechanism where a script
+# can adjust it's execution based on the custom fields stored in the repository
+# config.
+#
+# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+groovy.customFields =
+
+#
+# Fanout Settings
+#
+
+# Fanout is a PubSub notification service that can be used by Sparkleshare
+# to eliminate repository change polling. The fanout service runs in a separate
+# thread on a separate port from the Gitblit http/https application.
+# This service is provided so that Sparkleshare may be used with Gitblit in
+# firewalled environments or where reliance on Sparkleshare's default notifications
+# server (notifications.sparkleshare.org) is unwanted.
+#
+# This service maintains an open socket connection from the client to the
+# Fanout PubSub service. This service may not work properly behind a proxy server.
+
+# Specify the interface for Fanout to bind it's service.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.bindInterface =
+
+# port for serving the Fanout PubSub service. <= 0 disables this service.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 17000
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.port = 0
+
+# Use Fanout NIO service. If false, a multi-threaded socket service will be used.
+# Be advised, the socket implementation spawns a thread per connection plus the
+# connection acceptor thread. The NIO implementation is completely single-threaded.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.useNio = true
+
+# Concurrent connection limit. <= 0 disables concurrent connection throttling.
+# If > 0, only the specified number of concurrent connections will be allowed
+# and all other connections will be rejected.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.connectionLimit = 0
+
+#
+# Authentication Settings
+#
+
+# Require authentication to see everything but the admin pages
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.authenticateViewPages = false
+
+# If web.authenticateViewPages=true you may optionally require a client-side
+# basic authentication prompt instead of the standard form-based login.
+#
+# SINCE 1.3.0
+web.enforceHttpBasicAuthentication = false
+
+# Require admin authentication for the admin functions and pages
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.authenticateAdminPages = true
+
+# Allow Gitblit to store a cookie in the user's browser for automatic
+# authentication. The cookie is generated by the user service.
+#
+# SINCE 0.5.0
+web.allowCookieAuthentication = true
+
+# Allow deletion of non-empty repositories. This is enforced for all delete vectors.
+#
+# SINCE 1.6.0
+web.allowDeletingNonEmptyRepositories = true
+
+# Setting to include personal repositories in the main repositories list.
+#
+# SINCE 1.6.0
+web.includePersonalRepositories = false
+
+# Config file for storing project metadata
+#
+# SINCE 1.2.0
+# BASEFOLDER
+web.projectsFile = ${baseFolder}/projects.conf
+
+# Either the full path to a user config file (users.conf)
+# OR a fully qualified class name that implements the IUserService interface.
+#
+# Any custom user service implementation must have a public default constructor.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+realm.userService = ${baseFolder}/users.conf
+
+# Ordered list of external authentication providers which will be used if
+# authentication against the local user service fails.
+#
+# Valid providers are:
+#
+# htpasswd
+# ldap
+# pam
+# redmine
+# salesforce
+# windows
+
+# e.g. realm.authenticationProviders = htpasswd windows
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+# SPACE-DELIMITED
+realm.authenticationProviders =
+
+# How to store passwords.
+# Valid values are plain, md5, or combined-md5. md5 is the hash of password.
+# combined-md5 is the hash of username.toLowerCase()+password.
+# Default is md5.
+#
+# SINCE 0.5.0
+realm.passwordStorage = md5
+
+# Minimum valid length for a plain text password.
+# Default value is 5. Absolute minimum is 4.
+#
+# SINCE 0.5.0
+realm.minPasswordLength = 5
+
+#
+# Gitblit Web Settings
+#
+# If blank Gitblit is displayed.
+#
+# SINCE 0.5.0
+web.siteName =
+
+# The canonical url of your Gitblit server to be used in repository url generation,
+# RSS feeds, and all embedded links in email and plugin-based notifications.
+#
+# If you are running Gitblit on a non-standard http port (i.e. not 80 and not 443)
+# then you must specify that port in this url otherwise your generated urls will be
+# incorrect.
+#
+# The hostname of this url will be extracted for SSH and GIT protocol repository
+# url generation.
+#
+# e.g. web.canonicalUrl = https://dev.gitblit.com
+# web.canonicalUrl = https://dev.gitblit.com:8443
+#
+# SINCE 1.4.0
+web.canonicalUrl =
+
+# You may specify a different logo image for the header but it must be 120x45px.
+# If the specified file does not exist, the default Gitblit logo will be used.
+#
+# SINCE 1.3.0
+# BASEFOLDER
+web.headerLogo = ${baseFolder}/logo.png
+
+# You may specify a different link URL for the logo image anchor.
+# If blank the Gitblit main page URL is used.
+#
+# SINCE 1.3.0
+# BASEFOLDER
+web.rootLink =
+
+# You may specify a custom header background CSS color. If unspecified, the
+# default color will be used.
+#
+# e.g. web.headerBackgroundColor = #002060
+#
+# SINCE 1.3.0
+web.headerBackgroundColor =
+
+# You may specify a custom header foreground CSS color. If unspecified, the
+# default color will be used.
+#
+# e.g. web.headerForegroundColor = white
+#
+# SINCE 1.3.0
+web.headerForegroundColor =
+
+# You may specify a custom header foreground hover CSS color. If unspecified, the
+# default color will be used.
+#
+# e.g. web.headerHoverColor = white
+#
+# SINCE 1.3.0
+web.headerHoverColor =
+
+# You may specify a custom header border CSS color. If unspecified, the default
+# color will be used.
+#
+# e.g. web.headerBorderColor = #002060
+#
+# SINCE 1.3.0
+web.headerBorderColor =
+
+# You may specify a custom header border CSS color. If unspecified, the default
+# color will be used.
+#
+# e.g. web.headerBorderFocusColor = #ff9900
+#
+# SINCE 1.3.0
+web.headerBorderFocusColor =
+
+# If *web.authenticateAdminPages*=true, users with "admin" role can create
+# repositories, create users, and edit repository metadata.
+#
+# If *web.authenticateAdminPages*=false, any user can execute the aforementioned
+# functions.
+#
+# SINCE 0.5.0
+web.allowAdministration = true
+
+# Setting to disable rendering the top-level navigation header which includes
+# the login form, top-level links like dashboard, repositories, search, etc.
+# This setting is only useful if you plan to embed Gitblit within another page
+# or system.
+#
+# SINCE 1.4.0
+web.hideHeader = false
+
+# Allows rpc clients to list repositories and possibly manage or administer the
+# Gitblit server, if the authenticated account has administrator permissions.
+# See *web.enableRpcManagement* and *web.enableRpcAdministration*.
+#
+# SINCE 0.7.0
+web.enableRpcServlet = true
+
+# Allows rpc clients to manage repositories and users of the Gitblit instance,
+# if the authenticated account has administrator permissions.
+# Requires *web.enableRpcServlet=true*.
+#
+# SINCE 0.7.0
+web.enableRpcManagement = false
+
+# Allows rpc clients to control the server settings and monitor the health of this
+# this Gitblit instance, if the authenticated account has administrator permissions.
+# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*.
+#
+# SINCE 0.7.0
+web.enableRpcAdministration = false
+
+# Full path to a configurable robots.txt file. With this file you can control
+# what parts of your Gitblit server respectable robots are allowed to traverse.
+# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html
+#
+# SINCE 1.0.0
+# BASEFOLDER
+web.robots.txt = ${baseFolder}/robots.txt
+
+# The number of minutes to cache a page in the browser since the last request.
+# The default value is 0 minutes. A value <= 0 disables all page caching which
+# is the default behavior for Gitblit <= 1.3.0.
+#
+# SINCE 1.3.1
+web.pageCacheExpires = 0
+
+# If true, the web ui layout will respond and adapt to the browser's dimensions.
+# if false, the web ui will use a 940px fixed-width layout.
+# http://twitter.github.com/bootstrap/scaffolding.html#responsive
+#
+# SINCE 1.0.0
+web.useResponsiveLayout = true
+
+# Allow Gravatar images to be displayed in Gitblit pages.
+#
+# SINCE 0.8.0
+web.allowGravatar = true
+
+# Allow dynamic zip downloads.
+#
+# SINCE 0.5.0
+web.allowZipDownloads = true
+
+# If *web.allowZipDownloads=true* the following formats will be displayed for
+# download compressed archive links:
+#
+# zip = standard .zip
+# tar = standard tar format (preserves *nix permissions and symlinks)
+# gz = gz-compressed tar
+# xz = xz-compressed tar
+# bzip2 = bzip2-compressed tar
+#
+# SPACE-DELIMITED
+# SINCE 1.2.0
+web.compressedDownloads = zip gz
+
+# Allow optional Lucene integration. Lucene indexing is an opt-in feature.
+# A repository may specify branches to index with Lucene instead of using Git
+# commit traversal. There are scenarios where you may want to completely disable
+# Lucene indexing despite a repository specifying indexed branches. One such
+# scenario is on a resource-constrained federated Gitblit mirror.
+#
+# SINCE 0.9.0
+web.allowLuceneIndexing = true
+
+# Allows an authenticated user to create forks of a repository
+#
+# set this to false if you want to disable all fork controls on the web site
+#
+web.allowForking = true
+
+# Controls the length of shortened commit hash ids
+#
+# SINCE 1.2.0
+web.shortCommitIdLength = 6
+
+# Use Clippy (Flash solution) to provide a copy-to-clipboard button.
+# If false, a button with a more primitive JavaScript-based prompt box will
+# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative.
+#
+# SINCE 0.8.0
+web.allowFlashCopyToClipboard = true
+
+# Default maximum number of commits that a repository may contribute to the
+# activity page, regardless of the selected duration. This setting may be valuable
+# for an extremely busy server. This value may also be configed per-repository
+# in Edit Repository. 0 disables this throttle.
+#
+# SINCE 1.2.0
+web.maxActivityCommits = 0
+
+# Default number of entries to include in RSS Syndication links
+#
+# SINCE 0.5.0
+web.syndicationEntries = 25
+
+# Show the size of each repository on the repositories page.
+# This requires recursive traversal of each repository folder. This may be
+# non-performant on some operating systems and/or filesystems.
+#
+# SINCE 0.5.2
+web.showRepositorySizes = true
+
+# List of custom regex expressions that can be displayed in the Filters menu
+# of the Repositories and Activity pages. Keep them very simple because you
+# are likely to run into encoding issues if they are too complex.
+#
+# Use !!! to separate the filters
+#
+# SINCE 0.8.0
+web.customFilters =
+
+# Show federation registrations (without token) and the current pull status
+# to non-administrator users.
+#
+# SINCE 0.6.0
+web.showFederationRegistrations = false
+
+# This is the message displayed when *web.authenticateViewPages=true*.
+# This can point to a file with Markdown content.
+# Specifying "gitblit" uses the internal login message.
+#
+# SINCE 0.7.0
+# BASEFOLDER
+web.loginMessage = gitblit
+
+# This is the message displayed above the repositories table.
+# This can point to a file with Markdown content.
+# Specifying "gitblit" uses the internal welcome message.
+#
+# SINCE 0.5.0
+# BASEFOLDER
+web.repositoriesMessage = gitblit
+
+# Ordered list of charsets/encodings to use when trying to display a blob.
+# If empty, UTF-8 and ISO-8859-1 are used. The server's default charset
+# is always appended to the encoding list. If all encodings fail to cleanly
+# decode the blob content, UTF-8 will be used with the standard malformed
+# input/unmappable character replacement strings.
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+web.blobEncodings = UTF-8 ISO-8859-1
+
+# Manually set the default timezone to be used by Gitblit for display in the
+# web ui. This value is independent of the JVM timezone. Specifying a blank
+# value will default to the JVM timezone.
+# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+web.timezone =
+
+# Use the client timezone when formatting dates.
+# This uses AJAX to determine the browser's timezone and may require more
+# server overhead because a Wicket session is created. All Gitblit pages
+# attempt to be stateless, if possible.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.useClientTimezone = false
+
+# Time format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.8.0
+web.timeFormat = HH:mm
+
+# Short date format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.5.0
+web.datestampShortFormat = yyyy-MM-dd
+
+# Long date format
+#
+# SINCE 0.8.0
+web.datestampLongFormat = EEEE, MMMM d, yyyy
+
+# Long timestamp format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.5.0
+web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z
+
+# Mount URL parameters
+# This setting controls if pretty or parameter URLs are used.
+# i.e.
+# if true:
+# http://localhost/commit/myrepo/abcdef
+# if false:
+# http://localhost/commit/?r=myrepo&h=abcdef
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.mountParameters = true
+
+# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding
+# in URLs as a security precaution for proxies. This setting tells Gitblit
+# to preemptively replace '/' with '*' or '!' for url string parameters.
+#
+# <https://issues.apache.org/jira/browse/WICKET-1303>
+# <http://tomcat.apache.org/security-6.html#Fixed_in_Apache_Tomcat_6.0.10>
+# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your
+# *CATALINA_OPTS* or to your JVM launch parameters
+#
+# SINCE 0.5.2
+web.forwardSlashCharacter = /
+
+# Show other URLs on the summary page for accessing your git repositories
+# Use spaces to separate urls.
+#
+# {0} is the token for the repository name
+# {1} is the token for the username
+#
+# The username is only practical if you have setup your other git serving
+# solutions accounts to have the same username as the Gitblit account.
+#
+# e.g.
+# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0} https://{1}@localhost/r/{0}
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.otherUrls =
+
+# Should app-specific clone links be displayed for SourceTree, SparkleShare, etc?
+#
+# SINCE 1.3.0
+web.allowAppCloneLinks = true
+
+# Choose how to present the repositories list.
+# grouped = group nested/subfolder repositories together (no sorting)
+# flat = flat list of repositories (sorting allowed)
+#
+# SINCE 0.5.0
+web.repositoryListType = grouped
+
+# If using a grouped repository list and there are repositories at the
+# root level of your repositories folder, you may specify the displayed
+# group name with this setting. This value is only used for web presentation.
+#
+# SINCE 0.5.0
+web.repositoryRootGroupName = main
+
+# Display the repository swatch color next to the repository name link in the
+# repositories list.
+#
+# SINCE 0.8.0
+web.repositoryListSwatches = true
+
+# Defines the default commit message renderer. This can be configured
+# per-repository.
+#
+# Valid values are: plain, markdown
+#
+# SINCE 1.4.0
+web.commitMessageRenderer = plain
+
+# Control if email addresses are shown in web ui
+#
+# SINCE 0.5.0
+web.showEmailAddresses = true
+
+# Shows a combobox in the page links header with commit, committer, and author
+# search selection. Default search is commit.
+#
+# SINCE 0.5.0
+web.showSearchTypeSelection = false
+
+# Controls display of activity graphs on the dashboard, activity, and summary
+# pages. Charting makes use of the external Google Charts API.
+#
+# SINCE 0.5.0
+web.generateActivityGraph = true
+
+# Displays the commits branch graph in the summary page and commits/log page.
+#
+# SINCE 1.4.0
+web.showBranchGraph = true
+
+# The default number of days to show on the activity page.
+# Value must exceed 0 else default of 7 is used
+#
+# SINCE 0.8.0
+web.activityDuration = 7
+
+# Choices for days of activity to display.
+#
+# SPACE-DELIMITED
+# SINCE 1.3.0
+web.activityDurationChoices = 1 3 7 14 21 28
+
+# Maximum number of days of activity that may be displayed on the activity page.
+#
+# SINCE 1.3.2
+web.activityDurationMaximum = 30
+
+# The number of days of commits to cache in memory for the dashboard, activity,
+# and project pages. A value of 0 will disable all caching and will parse commits
+# in each repository per-request. If the value > 0 these pages will try to fulfill
+# requests using the commit cache. If the request specifies a period which falls
+# outside the commit cache window, then the cache will be ignored and the request
+# will be fulfilled by brute-force parsing all relevant commits per-repository.
+#
+# Consider the values specified for *web.activityDurationChoices* when setting
+# the cache size AND consider adjusting the JVM -Xmx heap parameter appropriately.
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+web.activityCacheDays = 14
+
+# Case-insensitive list of authors to exclude from metrics. Useful for
+# eliminating bots.
+#
+# SPACE-DELIMITED
+# SINCE 1.3.0
+web.metricAuthorExclusions =
+
+# The number of commits to display on the summary page
+# Value must exceed 0 else default of 20 is used
+#
+# SINCE 0.5.0
+web.summaryCommitCount = 16
+
+# The number of tags/branches to display on the summary page.
+# -1 = all tags/branches
+# 0 = hide tags/branches
+# N = N tags/branches
+#
+# SINCE 0.5.0
+web.summaryRefsCount = 5
+
+# Show a README file, if available, on the summary page.
+#
+# SINCE 1.4.0
+web.summaryShowReadme = false
+
+# The number of items to show on a page before showing the first, prev, next
+# pagination links. A default of 50 is used for any invalid value.
+#
+# SINCE 0.5.0
+web.itemsPerPage = 50
+
+# The number of reflog changes to display on the overview page
+# Value must exceed 0 else default of 5 is used
+#
+# SINCE 1.3.0
+web.overviewReflogCount = 5
+
+# The number of reflog changes to show on a reflog page before show the first,
+# prev, next pagination links. A default of 10 is used for any invalid value.
+#
+# SINCE 1.3.0
+web.reflogChangesPerPage = 10
+
+# Specify the names of documents in the root of your repository to be displayed
+# in tabs on your repository docs page. If the name is not found in the root
+# then no tab is added. The order specified is the order displayed. Do not
+# specify a file extension as the aggregation of markup extensions + txt are used
+# in the search algorithm.
+#
+# SPACE-DELIMITED
+# SINCE 1.4.0
+web.documents = readme home index changelog contributing submitting_patches copying license notice authors
+
+# Registered file extensions to ignore during Lucene indexing
+#
+# SPACE-DELIMITED
+# SINCE 0.9.0
+web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt pptx png so swf tar xcf xls xlsx zip
+
+# Registered extensions for google-code-prettify
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.prettyPrintExtensions = aea agc basic c cbm cl clj cpp cs css dart el erl erlang frm fs go groovy h hpp hs htm html java js latex lisp ll llvm lsp lua ml moxie mumps n nemerle pascal php pl pm prefs properties proto py r R rb rd Rd rkt s S scala scm sh Splus sql ss tcl tex vb vbs vhd vhdl wiki xml xq xquery yaml yml ymlapollo
+
+# Registered extensions for markdown transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.5.0
+web.markdownExtensions = md mkd markdown MD MKD
+
+# Registered extensions for mediawiki transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.mediawikiExtensions = mw mediawiki
+
+# Registered extensions for twiki transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.twikiExtensions = twiki
+
+# Registered extensions for textile transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.textileExtensions = textile
+
+# Registered extensions for confluence transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.confluenceExtensions = confluence
+
+# Registered extensions for tracwiki transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.tracwikiExtensions = tracwiki
+
+# Image extensions
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.imageExtensions = bmp jpg gif png
+
+# Registered extensions for binary blobs
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.binaryExtensions = 7z arc arj bin dll doc docx exe gz jar lib lzh odg odf odt pdf ppt pptx so tar xls xlsx zip
+
+# Aggressive heap management will run the garbage collector on every generated
+# page. This slows down page generation a little but improves heap consumption.
+#
+# SINCE 0.5.0
+web.aggressiveHeapManagement = false
+
+# Run the webapp in debug mode
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.debugMode = false
+
+# Force a default locale for all users, ignoring the browser's settings.
+# An empty value allows Gitblit to use the translation preferred by the browser.
+#
+# Changing this value while the server is running will only affect new sessions.
+#
+# e.g. web.forceDefaultLocale = en
+#
+# SINCE 1.3.0
+web.forceDefaultLocale =
+
+# Enable/disable global regex substitutions (i.e. shared across repositories)
+#
+# SINCE 0.5.0
+# DEPRECATED 1.4.0 (migrate to bugtraq instead)
+regex.global = true
+
+# Example global regex substitutions
+# Use !!! to separate the search pattern and the replace pattern
+# searchpattern!!!replacepattern
+# SINCE 0.5.0
+
+# regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://somehost/bug/$3">$3</a>
+# SINCE 0.5.0
+
+# Example Gerrit links
+# regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!Change-Id: <a href="http://somehost/r/#q,$2,n,z">$2</a>
+# regex.global.reviewedon = \\b(Reviewed-on:\\s*)([A-Za-z0-9:/\\.]*)\\b!!!Reviewed-on: <a href="$2">$2</a>
+
+# Example per-repository regex substitutions overrides global
+# SINCE 0.5.0
+# regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://elsewhere/bug/$3">$3</a>
+
+#
+# Mail Settings
+# SINCE 0.6.0
+#
+# Mail settings are used to notify administrators of received federation proposals
+#
+
+# ip or hostname of smtp server
+#
+# SINCE 0.6.0
+mail.server =
+
+# port to use for smtp requests
+#
+# SINCE 0.6.0
+mail.port = 25
+
+# debug the mail executor
+#
+# SINCE 0.6.0
+mail.debug = false
+
+# use SMTPs flag
+mail.smtps = false
+
+# use STARTTLS flag
+#
+# SINCE 1.6.0
+mail.starttls = false
+
+# if your smtp server requires authentication, supply the credentials here
+#
+# SINCE 0.6.0
+mail.username =
+# SINCE 0.6.0
+mail.password =
+
+# from address for generated emails
+#
+# SINCE 0.6.0
+mail.fromAddress =
+
+# List of email addresses for the Gitblit administrators
+#
+# SPACE-DELIMITED
+# SINCE 0.6.0
+mail.adminAddresses =
+
+# List of email addresses for sending push email notifications.
+#
+# This key currently requires use of the sendemail.groovy hook script.
+# If you set sendemail.groovy in *groovy.postReceiveScripts* then email
+# notifications for all repositories (regardless of access restrictions!)
+# will be sent to these addresses.
+#
+# SPACE-DELIMITED
+# SINCE 0.8.0
+mail.mailingLists =
+
+#
+# Federation Settings
+# SINCE 0.6.0
+#
+# A Gitblit federation is a way to backup one Gitblit instance to another.
+#
+# *git.enableGitServlet* must be true to use this feature.
+
+# Your federation name is used for federation status acknowledgments. If it is
+# unset, and you elect to send a status acknowledgment, your Gitblit instance
+# will be identified by its hostname, if available, else your internal ip address.
+# The source Gitblit instance will also append your external IP address to your
+# identification to differentiate multiple pulling systems behind a single proxy.
+#
+# SINCE 0.6.0
+federation.name =
+
+# Specify the passphrase of this Gitblit instance.
+#
+# An unspecified (empty) passphrase disables processing federation requests.
+#
+# This value can be anything you want: an integer, a sentence, an haiku, etc.
+# Keep the value simple, though, to avoid Java properties file encoding issues.
+#
+# Changing your passphrase will break any registrations you have established with other
+# Gitblit instances.
+#
+# CASE-SENSITIVE
+# SINCE 0.6.0
+# RESTART REQUIRED *(only to enable or disable federation)*
+federation.passphrase =
+
+# Control whether or not this Gitblit instance can receive federation proposals
+# from another Gitblit instance. Registering a federated Gitblit is a manual
+# process. Proposals help to simplify that process by allowing a remote Gitblit
+# instance to send your Gitblit instance the federation pull data.
+#
+# SINCE 0.6.0
+federation.allowProposals = false
+
+# The destination folder for cached federation proposals.
+# Use forward slashes even on Windows!!
+#
+# SINCE 0.6.0
+# BASEFOLDER
+federation.proposalsFolder = ${baseFolder}/proposals
+
+# The default pull frequency if frequency is unspecified on a registration
+#
+# SINCE 0.6.0
+federation.defaultFrequency = 60 mins
+
+# Federation Sets are named groups of repositories. The Federation Sets are
+# available for selection in the repository settings page. You can assign a
+# repository to one or more sets and then distribute the token for the set.
+# This allows you to grant federation pull access to a subset of your available
+# repositories. Tokens for federation sets only grant repository pull access.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.6.0
+federation.sets =
+
+# Federation pull registrations
+# Registrations are read once, at startup.
+#
+# RESTART REQUIRED
+#
+# frequency:
+# The shortest frequency allowed is every 5 minutes
+# Decimal frequency values are cast to integers
+# Frequency values may be specified in mins, hours, or days
+# Values that can not be parsed or are unspecified default to *federation.defaultFrequency*
+#
+# folder:
+# if unspecified, the folder is *git.repositoriesFolder*
+# if specified, the folder is relative to *git.repositoriesFolder*
+#
+# bare:
+# if true, each repository will be created as a *bare* repository and will not
+# have a working directory.
+#
+# if false, each repository will be created as a normal repository suitable
+# for local work.
+#
+# mirror:
+# if true, each repository HEAD is reset to *origin/master* after each pull.
+# The repository will be flagged *isFrozen* after the initial clone.
+#
+# if false, each repository HEAD will point to the FETCH_HEAD of the initial
+# clone from the origin until pushed to or otherwise manipulated.
+#
+# mergeAccounts:
+# if true, remote accounts and their permissions are merged into your
+# users.properties file
+#
+# notifyOnError:
+# if true and the mail configuration is properly set, administrators will be
+# notified by email of pull failures
+#
+# include and exclude:
+# Space-delimited list of repositories to include or exclude from pull
+# may be * wildcard to include or exclude all
+# may use fuzzy match (e.g. org.eclipse.*)
+
+#
+# (Nearly) Perfect Mirror example
+#
+
+#federation.example1.url = https://go.gitblit.com
+#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4
+#federation.example1.frequency = 120 mins
+#federation.example1.folder =
+#federation.example1.bare = true
+#federation.example1.mirror = true
+#federation.example1.mergeAccounts = true
+
+#
+# Advanced Realm Settings
+#
+
+# Auto-creates user accounts based on the servlet container principal. This
+# assumes that your Gitblit install is a protected resource and your container's
+# authentication process intercepts all Gitblit requests.
+#
+# SINCE 1.3.0
+realm.container.autoCreateAccounts = false
+
+# Allow or prohibit Windows guest account logins
+#
+# SINCE 1.3.0
+realm.windows.allowGuests = false
+
+# Allow user accounts belonging to the BUILTIN\Administrators group to be
+# Gitblit administrators.
+#
+# SINCE 1.4.0
+realm.windows.permitBuiltInAdministrators = true
+
+# The default domain for authentication.
+#
+# If specified, this domain will be used for authentication UNLESS the supplied
+# login name manually specifies a domain (.e.g. mydomain\james or james@mydomain)
+#
+# If unspecified, the username must be specified in UPN format (name@domain).
+#
+# if "." (dot) is specified, ONLY the local account database will be used.
+#
+# SINCE 1.3.0
+realm.windows.defaultDomain =
+
+# The PAM service name for authentication.
+# default: system-auth
+#
+# SINCE 1.3.1
+realm.pam.serviceName = system-auth
+
+# The Apache htpasswd file that contains the users and passwords.
+# default: ${baseFolder}/htpasswd
+#
+# RESTART REQUIRED
+# BASEFOLDER
+# SINCE 1.3.2
+realm.htpasswd.userfile = ${baseFolder}/htpasswd
+
+# Restrict the Salesforce user to members of this org.
+# default: 0 (i.e. do not check the Org ID)
+#
+# SINCE 1.3.0
+realm.salesforce.orgId = 0
+
+# URL of the LDAP server.
+# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to
+# send StartTLS command.
+#
+# SINCE 1.0.0
+realm.ldap.server = ldap://localhost
+
+# Login username for LDAP searches.
+# If this value is unspecified, anonymous LDAP login will be used.
+#
+# e.g. mydomain\\username
+#
+# SINCE 1.0.0
+realm.ldap.username = cn=Directory Manager
+
+# Login password for LDAP searches.
+#
+# SINCE 1.0.0
+realm.ldap.password = password
+
+# Bind pattern for Authentication.
+# Allow to directly authenticate an user without LDAP Searches.
+#
+# e.g. CN=${username},OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain
+#
+# SINCE 1.5.0
+realm.ldap.bindpattern =
+
+
+# Delegate team membership control to LDAP.
+#
+# If true, team user memberships will be specified by LDAP groups. This will
+# disable team selection in Edit User and user selection in Edit Team.
+#
+# If false, LDAP will only be used for authentication and Gitblit will maintain
+# team memberships with the *realm.ldap.backingUserService*.
+#
+# SINCE 1.0.0
+realm.ldap.maintainTeams = false
+
+# Root node for all LDAP users
+#
+# This is the root node from which subtree user searches will begin.
+# If blank, Gitblit will search ALL nodes.
+#
+# SINCE 1.0.0
+realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP users
+#
+# Query pattern to use when searching for a user account. This may be any valid
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+# ${username} - The text entered as the user name
+#
+# SINCE 1.0.0
+realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username}))
+
+# Root node for all LDAP groups to be used as Gitblit Teams
+#
+# This is the root node from which subtree team searches will begin.
+# If blank, Gitblit will search ALL nodes.
+#
+# SINCE 1.0.0
+realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP groups
+#
+# Query pattern to use when searching for a team. This may be any valid
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+# ${username} - The text entered as the user name
+# ${dn} - The Distinguished Name of the user logged in
+#
+# All attributes from the LDAP User record are available. For example, if a user
+# has an attribute "fullName" set to "John", "(fn=${fullName})" will be
+# translated to "(fn=John)".
+#
+# SINCE 1.0.0
+realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn}))
+
+# Filter criteria for empty LDAP groups
+#
+# Query pattern to use when searching for an empty team. This may be any valid
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# default: (&(objectClass=group)(!(member=*)))
+# SINCE 1.4.0
+realm.ldap.groupEmptyMemberPattern = (&(objectClass=group)(!(member=*)))
+
+# LDAP users or groups that should be given administrator privileges.
+#
+# Teams are specified with a leading '@' character. Groups with spaces in the
+# name can be entered as "@team name". This setting only applies when using
+# LDAP to maintain team memberships.
+#
+# e.g. realm.ldap.admins = john @git_admins "@git admins"
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+realm.ldap.admins = @Git_Admins
+
+# Attribute(s) on the USER record that indicate their display (or full) name.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes. Examples:
+# displayName - Uses the attribute 'displayName' on the user record
+# ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3
+# attributes together, with a '.' after personalTitle
+#
+# SINCE 1.0.0
+realm.ldap.displayName = displayName
+
+# Attribute(s) on the USER record that indicate their email address.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes. Examples:
+# email - Uses the attribute 'email' on the user record
+# ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes
+# together with a '.' and '@' creating something like first.last@gitblit.com
+#
+# SINCE 1.0.0
+realm.ldap.email = email
+
+# Attribute on the USER record that indicate their username to be used in gitblit
+# when synchronizing users from LDAP
+# if blank, Gitblit will use uid
+# For MS Active Directory this may be sAMAccountName
+#
+# SINCE 1.0.0
+realm.ldap.uid = uid
+
+# Defines whether to synchronize all LDAP users and teams into the user service
+#
+# Valid values: true, false
+# If left blank, false is assumed
+#
+# SINCE 1.4.0
+realm.ldap.synchronize = false
+
+# Defines the period to be used when synchronizing users and teams from ldap.
+#
+# Must be of the form '<long> <TimeUnit>' where <TimeUnit> is one of 'MILLISECONDS', 'SECONDS', 'MINUTES', 'HOURS', 'DAYS'
+
+# default: 5 MINUTES
+#
+# RESTART REQUIRED
+# SINCE 1.4.0
+realm.ldap.syncPeriod = 5 MINUTES
+
+# Defines whether to delete non-existent LDAP users from the user service
+# during synchronization. depends on realm.ldap.synchronize = true
+#
+# Valid values: true, false
+# If left blank, true is assumed
+#
+# SINCE 1.4.0
+realm.ldap.removeDeletedUsers = true
+
+# URL of the Redmine.
+#
+# SINCE 1.2.0
+realm.redmine.url = http://example.com/redmine
+
+#
+# Gitblit GO Server Settings
+# The following settings only affect the integrated GO variant.
+#
+
+# The temporary folder to decompress the embedded gitblit webapp.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+server.tempFolder = ${baseFolder}/temp
+
+# Specify the maximum number of concurrent http/https Jetty worker
+# threads to allow. This setting does not affect other threaded
+# daemons and components of Gitblit.
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+server.threadPoolSize = 50
+
+# Context path for the GO application. You might want to change the context
+# path if running Gitblit behind a proxy layer such as mod_proxy.
+#
+# SINCE 0.7.0
+# RESTART REQUIRED
+server.contextPath = /
+
+# Standard http port to serve. <= 0 disables this connector.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 80 or 8080
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpPort = 0
+
+# Secure/SSL https port to serve. <= 0 disables this connector.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 443 or 8443
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpsPort = 8443
+
+# Automatically redirect http requests to the secure https connector.
+#
+# This setting requires that you have configured server.httpPort and server.httpsPort.
+# Unless you are on a private LAN where you trust all client connections, it is
+# recommended to use https for all communications.
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+server.redirectToHttpsPort = false
+
+# Specify the interface for Jetty to bind the standard connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpBindInterface =
+
+# Specify the interface for Jetty to bind the secure connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpsBindInterface =
+
+# Alias of certificate to use for https/SSL serving. If blank the first
+# certificate found in the keystore will be used.
+#
+# SINCE 1.2.0
+# RESTART REQUIRED
+server.certificateAlias = localhost
+
+# Password for SSL keystore.
+# Keystore password and certificate password must match.
+# This is provided for convenience, its probably more secure to set this value
+# using the --storePassword command line parameter.
+#
+# If you are using the official JRE or JDK from Oracle you may not have the
+# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM. Because
+# of this, your store/key password can not exceed 7 characters. If you require
+# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction
+# Policy files from Oracle.
+#
+# http://www.oracle.com/technetwork/java/javase/downloads/index.html
+#
+# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited
+# Strength encryption is available.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.storePassword = gitblit
+
+# If serving over https (recommended) you might consider requiring clients to
+# authenticate with ssl certificates. If enabled, only https clients with the
+# a valid client certificate will be able to access Gitblit.
+#
+# If disabled, client certificate authentication is optional and will be tried
+# first before falling-back to form authentication or basic authentication.
+#
+# Requiring client certificates to access any of Gitblit may be too extreme,
+# consider this carefully.
+#
+# SINCE 1.2.0
+# RESTART REQUIRED
+server.requireClientCertificates = false
+
+# Port for shutdown monitor to listen on.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.shutdownPort = 8081
projects / gitblit.git / commitdiff