Ensure that drone tags 1.16.x and 1.16 on push to v1.16.x tag (#20304)
We need pushes to v1.16.9 to create tags to 1.16.9 and 1.16 but not 1 or latest.
We have previously adjusted the manifest to remove the latest tag, and have removed
auto_tags so that 1 does not get tagged but in doing so we also stopped 1.16 being
tagged. So here we just state the that we tag x.yy in addition to x.yyz*.
Lunny Xiao [Tue, 7 Jun 2022 13:39:08 +0000 (21:39 +0800)]
Only log non ErrNotExist errors in git.GetNote (#19884) (#19905)
* Fix GetNote
* Only log errors if the error is not ErrNotExist
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: Andrew Thornton <art27@cantab.net> Co-authored-by: Andrew Thornton <art27@cantab.net>
zeripath [Fri, 3 Jun 2022 21:38:29 +0000 (22:38 +0100)]
Ensure responses are context.ResponseWriters (#19843) (#19859)
* Ensure responses are context.ResponseWriters (#19843)
Backport #19843
In order for web.Wrap to be able to detect if a response has been written
we need to wrap any non-context.ResponseWriters as a such. Otherwise
responses will be incorrectly detected as non-written to and handlers can
double run.
In the case of GZip this handler will change the response to a non-context.RW
and this failure to correctly detect response writing causes fallthrough and
a NPE.
Fix #19839
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Ondřej Čertík [Thu, 26 May 2022 15:55:26 +0000 (09:55 -0600)]
Make WIP prefixes case insensitive, e.g. allow `Draft` as a WIP prefix (#19780) (#19811)
Backport #19780
The issue was that only the actual title was converted to uppercase, but
not the prefix as specified in `WORK_IN_PROGRESS_PREFIXES`. As a result,
the following did not work:
Then indeed one could use `Draft` (as well as `DRAFT`) in the title.
However, the link `Start the title with DRAFT: to prevent the pull request
from being merged accidentally.` showed the suggestion in uppercase; so
it is not possible to show it as `Draft`. This PR fixes it, and allows
to use `Draft` in `WORK_IN_PROGRESS_PREFIXES`.
zeripath [Wed, 25 May 2022 11:49:59 +0000 (12:49 +0100)]
Prevent NPE when cache service is disabled (#19703) (#19783)
Backport #19703
The cache service can be disabled - at which point ctx.Cache will be nil
and the use of it will cause an NPE.
The main part of this PR is that the cache is used for restricting
resending of activation mails and without this we cache we cannot
restrict this. Whilst this code could be re-considered to use the db and
probably should be, I think we can simply disable this code in the case
that the cache is disabled.
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: Lauris BH <lauris@nix.lv>
zeripath [Sat, 21 May 2022 14:26:08 +0000 (15:26 +0100)]
Detect truncated utf-8 characters at the end of content as still representing utf-8 (#19773) (#19774)
Backport #19773
Our character detection algorithm can potentially incorrectly detect utf-8 as iso-8859-x
if there is a truncated character at the end of the partially read file.
This PR changes the detection algorithm to truncated utf8 characters at the end of the
buffer.
Gusted [Mon, 16 May 2022 09:48:16 +0000 (09:48 +0000)]
Fix issue overview for teams (#19652) (#19653)
- Backport #19652
- Don't use hacky solution to limit to the correct RepoID's, instead use current code to handle these limits. The existing code is more correct than the hacky solution.
- Resolves #19636
Conflicts:
models/action_test.go
The GetFeeds function does not have a Context argument in 1.16.
models/action.go
The SQL statement is essentially the same in 1.16 but
structured differently. The Join() was copied and the
created_unix field prefixed with `action`.
models/action_list.go
in 1.16 the loadRepoOwner method did not exist and
it was done in the RetrieveFeeds method of web/feed/profile.go.
The safeguard to skip when act.Repo == nil was moved there.
techknowlogick [Fri, 6 May 2022 18:09:54 +0000 (14:09 -0400)]
Set safe dir for git operations in .drone.yml CI (#19641) (#19643)
Our drone by necessity runs on git repositories not owned by the drone process. Unfortunately this means that git operations and thence CI builds will fail without the `safe.directory` option being set.
zeripath [Mon, 2 May 2022 12:44:45 +0000 (13:44 +0100)]
Add finalizers to ensure that repos are closed and blobreaders are closed (#19495) (#19496)
It may be prudent to add runtime finalizers to the git.Repository and
git.blobReader objects to absolutely ensure that these are both properly
cancelled, cleaned and closed out.
This commit is a backport of an extract from #19448
Don't error when branch's commit doesn't exist (#19547) (#19548)
- Backport #19547
- If one of the branches no longer exists, don't throw an error, it's possible that the branch was destroyed during the process. Simply skip it and disregard it.
- Resolves #19541
Prevent intermittent race in attribute reader close (#19537) (#19539)
Backport #19537
There is a potential rare race possible whereby the c.running channel could
be closed twice. Looking at the code I do not see a need for this c.running
channel and therefore I think we can remove this. (I think the c.running
might have been some attempt to prevent a hang but the use of os.Pipes should
prevent that.)
Fix 64-bit atomic operations on 32-bit machines (#19531) (#19532)
- Backport #19531
- Doing 64-bit atomic operations on 32-bit machines is a bit tricky by golang, as they can only be done under certain set of conditions(https://pkg.go.dev/sync/atomic#pkg-note-BUG).
- This PR fixes such case whereby the conditions weren't met, it moves the int64 to the first field of the struct, which will 64-bit operations happening on this property on 32-bit machines.
- Resolves #19518
Within doArchive there is a service goroutine that performs the
archiving function. This goroutine reports its error using a `chan
error` called `done`. Prior to this PR this channel had 0 capacity
meaning that the goroutine would block until the `done` channel was
cleared - however there are a couple of ways in which this channel might
not be read.
The simplest solution is to add a single space of capacity to the
goroutine which will mean that the goroutine will always complete and
even if the `done` channel is not read it will be simply garbage
collected away.
(The PR also contains two other places when setting up the indexers
which do not leak but where the blocking of the sending goroutine is
also unnecessary and so we should just add a small amount of capacity
and let the sending goroutine complete as soon as it can.)
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: 6543 <6543@obermui.de> Co-authored-by: 6543 <6543@obermui.de>
Mark TemplateLoading error as "UnprocessableEntity" (#19445) (#19446)
* Mark TemplateLoading error as "UnprocessableEntity" (#19445)
- Backport #19445
- Don't return Internal Server error if the user provide incorrect label template, instead return UnprocessableEntity.
- Resolves #19399
If an `os/exec.Command` is passed non `*os.File` as an input/output, go
will create `os.Pipe`s and wait for their closure in `cmd.Wait()`. If
the code following this is responsible for closing `io.Pipe`s or other
handlers then on process death from context cancellation the `Wait` can
hang.
There are two possible solutions:
1. use `os.Pipe` as the input/output as `cmd.Wait` does not wait for these.
2. create a goroutine waiting on the context cancellation that will close the inputs.
This PR provides the second option - which is a simpler change that can
be more easily backported.
Closes #19448
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: zeripath <art27@cantab.net>
Set correct PR status on 3way on conflict checking (#19457) (#19458)
- Backport #19457
- When 3-way merge is enabled for conflict checking, it has a new interesting behavior that it doesn't return any error when it found a conflict, so we change the condition to not check for the error, but instead check if conflictedfiles is populated, this fixes a issue whereby PR status wasn't correctly on conflicted PR's.
- Refactor the mergeable property(which was incorrectly set and lead me this bug) to be more maintainable.
- Add a dedicated test for conflicting checking, so it should prevent future issues with this.
- Ref: Fix the latest error for https://gitea.com/gitea/go-sdk/pulls/579
Fix DELETE request for non-existent public key (#19443) (#19444)
- Backport #19443
- Add a return for the first "block" of errors, which fixes the double error messages.
- Add a return for `externallyManaged`.
- Resolves #19398
Don't panic on `ErrEmailInvalid` (#19441) (#19442)
- Backport #19441
- Don't panic on `ErrEmailInvalid`, this was caused due that we were trying to force `ErrEmailCharIsNotSupported` interface, which panics.
- Resolves #19397
Warn on SSH connection for incorrect configuration (#19317) (#19437)
Backport #19317
- Warn on SSH connection for incorrect configuration
- When `setting.RepoRootPath` cannot be found(most likely due to
incorrect configuration) show "Gitea: Incorrect configuration" on the
client-side to help easier with debugging the problem.
When updating mirror repo intervals by API reschedule next update too (#19429) (#19433)
Backport #19429
When a mirror repo interval is updated by the UI it is rescheduled with that interval
however the API does not do this. The API also lacks the enable_prune option.
This PR adds this functionality in to the API Edit Repo endpoint.
Don't allow merging PR's which are being conflict checked (#19357) (#19358)
* Don't allow merging PR's which are being conflict checked (#19357)
- Backport of #19357
- When a PR is still being conflict checked, don't allow the PR to be merged(the merge button could already be visible before e.g. a new commit was pushed to the PR).
- Resolves #19352
Fix middleware function's placements for `/user/...` (#19377) (#19378)
- Backport #19377
- Add reqSignIn to `/user/task/{task}` as it specific to a logged in user currently not-logged in user could cause a NPE.
- Remove `/user/active` reqSignIn middleware, because when you want to active a account you're not "signed in" so it doesn't make sense to add that middleware.
Disable service worker by default (#18914) (#19342)
The service worker causes a lot of issues with JS errors after instance
upgrades while not bringing any real performance gain over regular HTTP
caching.
Disable it by default for this reason. Maybe later we can remove it
completely, as I simply see no benefit in having it.
Fix invalid CSRF token bug, make sure CSRF tokens can be up-to-date (#19338)
There was a bug that the CSRF token wouldn't in 24h. This fix just does what the CSRF function comment says: If this request is a GET request, it will generate a new token. Then the CSRF token can be kept up-to-date.
6543 [Thu, 31 Mar 2022 14:57:13 +0000 (16:57 +0200)]
Move checks for pulls before merge into own function (#19271) (#19277)
Backport #19271
Fix:
* The API does ignore issue dependencies where Web does not
* The API checks if "IsSignedIfRequired" where Web does not - UI probably do but nothing will some to craft custom requests
* Default merge message is crafted a bit different between API and Web if not set on specific cases ...
zeripath [Tue, 29 Mar 2022 20:19:57 +0000 (21:19 +0100)]
Use full output of git show-ref --tags to get tags for PushUpdateAddTag (#19235) (#19236)
* Use full output of git show-ref --tags to get tags for PushUpdateAddTag (#19235)
Strangely #19038 appears to relate to an issue whereby a tag appears to
be listed in `git show-ref --tags` but then does not appear when `git
show-ref --tags -- short_name` is called.
As a solution though I propose to stop the second call as it is
unnecessary and only likely to cause problems.
I've also noticed that the tags calls are wildly inefficient and aren't using the common cat-files - so these have been added.
I've also noticed that the git commit-graph is not being written on mirroring - so I've also added writing this to the migration which should improve mirror rendering somewhat.
Fix #19038
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: 6543 <6543@obermui.de>
* fix rebase relict
zeripath [Tue, 29 Mar 2022 12:12:56 +0000 (13:12 +0100)]
Only send webhook events to active system webhooks and only deliver to active hooks (#19234) (#19248)
Backport #19234
There is a bug in the system webhooks whereby the active state is not checked when
webhooks are prepared and there is a bug that deactivating webhooks do not prevent
queued deliveries.
* Only add SystemWebhooks to the prepareWebhooks list if they are active
* At the time of delivery if the underlying webhook is not active mark it
as "delivered" but with a failed delivery so it does not get delivered.
zeripath [Sun, 27 Mar 2022 23:01:53 +0000 (00:01 +0100)]
Prevent intermittent failures in RepoIndexerTest (#19225 #19229) (#19228)
Backport #19225
Backport #19229
The RepoIndexerTest is failing with considerable frequency due to a race inherrent in
its design. This PR adjust this test to avoid the reliance on waiting for the populate
repo indexer to run and forcibly adds the repo to the queue. It then flushes the queue.
It may be worth separating out the tests somewhat by testing the Index function
directly away from the queue however, this forceful method should solve the current
problem.
zeripath [Sun, 27 Mar 2022 21:08:28 +0000 (22:08 +0100)]
Touch mirrors on even on fail to update (#19217) (#19233)
Backport #19217
If a mirror fails to be synchronised it should be pushed to the bottom of the queue
of the awaiting mirrors to be synchronised. At present if there LIMIT number of
broken mirrors they can effectively prevent all other mirrors from being synchronized
as their last_updated time will remain earlier than other mirrors.
* Hide sensitive content on admin panel progress monitor (#19218)
Sanitize urls within git process descriptions.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com> Co-authored-by: Andrew Thornton <art27@cantab.net>
* Do not include global arguments in process manager (#19226)
Backport #19226
The git command by default adds a number of global arguments. These are not
helpful to be displayed in the process manager and so should be skipped for
default process descriptions.
Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: wxiaoguang <wxiaoguang@gmail.com> Co-authored-by: Andrew Thornton <art27@cantab.net>
6543 [Wed, 23 Mar 2022 23:36:38 +0000 (00:36 +0100)]
Fix showing issues in your repositories (#18916) (#19191)
- Make a restriction on which issues can be shown based on if you the user or team has write permission to the repository.
- Fixes a issue whereby you wouldn't see any associated issues with a specific team on a organization if you wasn't a member(fixed by zeroing the User{ID} in the options).
- Resolves #18913
zeripath [Wed, 23 Mar 2022 20:01:23 +0000 (20:01 +0000)]
Prevent redirect to Host (2) (#19175) (#19186)
Backport #19175
Unhelpfully Locations starting with `/\` will be converted by the
browser to `//` because ... well I do not fully understand. Certainly
the RFCs and MDN do not indicate that this would be expected. Providing
"compatibility" with the (mis)behaviour of a certain proprietary OS is
my suspicion. However, we clearly have to protect against this.
Therefore we should reject redirection locations that match the regular
expression: `^/[\\\\/]+`
zeripath [Wed, 23 Mar 2022 19:04:50 +0000 (19:04 +0000)]
Fix compare link in active feeds for new branch (#19149) (#19185)
Backport #19149
When a new branch is pushed the old SHA is always listed as the empty sha and thus the compare link that is created does not work correctly.
Therefore when creating the compare link for new branches:
1. Attempt to get the parent of the first commit and use that as the basis
for the compare link.
2. If this is not possible make a comparison to the default branch
3. Finally if that is not possible simply do not show a compare link.
However, there are multiple broken compare links remaining therefore, in order for these to not break we will simply make the compare link redirect to the default branch.
Fix #19144
Signed-off-by: a1012112796 <1012112796@qq.com> Signed-off-by: Andrew Thornton <art27@cantab.net> Co-authored-by: Andrew Thornton <art27@cantab.net> Co-authored-by: a1012112796 <1012112796@qq.com>
Andrew Thornton [Wed, 23 Mar 2022 16:08:27 +0000 (16:08 +0000)]
Prevent start panic due to missing DotEscape function
Unfortunately #19169 causing a panic at startup in prod mode. This was hidden by dev
mode because the templates are compiled dynamically there. The issue is that DotEscape
is not in the original FuncMap at the time of compilation which causes a panic.
zeripath [Wed, 23 Mar 2022 13:18:11 +0000 (13:18 +0000)]
Try to prevent autolinking of displaynames by email readers (#19169) (#19183)
Backport #19169
Unfortunately many email readers will (helpfully) detect url or url-like names and
automatically create links to them, even in HTML emails. This is not ideal when
usernames can have dots in them.
This PR tries to prevent this behaviour by sticking ZWJ characters between dots and
also set the meta tag to prevent format detection.
Not every email template has been changed in this way - just the activation emails but
it may be that we should be setting the above meta tag in all of our emails too.
projects / gitea.git / log