Since we are only checking the links between objects we don't need
to hold onto commit messages after their headers have been parsed
by the walker. Dropping them saves a bit of memory, which is always
good when accepting huge pack files.
Change-Id: I378920409b6acf04a35cdf24f81567b1ce030e36 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
DeltaStream: Fix data corruption when reading large copies
If the copy instruction was larger than the input buffer given to us,
we copied the wrong part of the base stream during the next read().
This occurred on really big binary files where a copy instruction
of 64k wasn't unreasonable, but the caller's buffer was only 8192
bytes long. We copied the first 8192 bytes correctly, but then
reseeked the base stream back to the start of the copy region on
the second read of 8192 bytes. Instead of a sequence like ABCD
being read into the caller, we read AAAA.
Change-Id: I240a3f722a3eda1ce8ef5db93b380e3bceb1e201 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Use 8192 as default buffer size in ObjectLoader copyTo
As ObjectStreams are supposed to be buffered, most implementors will
be wrapping their underlying stream inside of a BufferedInputStream
in order to satisfy this requirement. Because developers are by
nature lazy, they will use the default buffer size rather than
specify their own.
The OpenJDk JRE implementations use 8192 as the default buffer
size, and when the higher level reader uses the same buffer size
the buffers "stack" nicely by avoiding a copy to the internal
buffer array. As OpenJDK is a popular virtual machine, we should
try to benefit from this nice stacking property during copyTo().
Change-Id: I69d53f273b870b841ced2be2e9debdfd987d98f4 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Exposing isEmpty, getLengthA, getLengthB make it easier to examine
the state of an edit and work with it from higher level code.
The before and after cut routines make it easy to split an edit
that contains another edit, such as to decompose a REPLACE that
contains a common sequence within it.
Change-Id: Id63d6476a7a6b23acb7ab237d414a0a1a7200290 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We weren't flushing the commit message before the diff output, which
meant the headers and message showed randomly interleaved with the
diff rather than immediately before.
Change-Id: I6cefab8d40e9d40c937e9deb12911188fec41b26 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We shouldn't escape non-special ASCII characters such as '@' or '~'.
These are valid in a path name on POSIX systems, and may appear as
part of a path in a GNU or Git style patch script. Escaping them
into octal just obfuscates the user's intent, with no gain.
When parsing an escaped octal sequence, we must parse no more
than 3 digits. That is, "\1002" is actually "@2", not the Unicode
character \u0202.
Change-Id: I3a849a0d318e69b654f03fd559f5d7f99dd63e5c Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
QuotedString.GIT_PATH returns the input reference exactly if
the string does not require quoting, otherwise it returns a
copy that contains the quotes on either end, plus escapes in
the middle where necessary to meet conventions.
Testing the return against '"' + name + '"' is always false,
because GIT_PATH will never return it that way. The only way
we have quotes on either end is if there is an escape in the
middle, in which case the string isn't equal anyway.
Change-Id: I4d21d8e5c7da0d7df9792c01ce719548fa2df16b Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ReceivePack: Rethrow exceptions caught during indexing
If we get an exception while indexing the incoming pack, its likely
a stream corruption. We already report an error to the client, but
we eat the stack trace, which makes debugging issues related to a
bug inside of JGit nearly impossible. Rethrow it under a new type
UnpackException, so embedding servers or applications can catch the
error and provide it to a human who might be able to forward such
traces onto a JGit developer for evaluation.
Change-Id: Icad41148bbc0c76f284c7033a195a6b51911beab Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of getting the limit from CoreConfig, use the larger of the
reader's limit or 5 MiB, under the assumption that any annotated tag
or commit of interest should be under 5 MiB. But if a repository
was really insane and had bigger objects, the reader implementation
can set its streaming limit higher in order to allow RevWalk to
still process it.
Change-Id: If2c15235daa3e2d1f7167e781aa83fedb5af9a30 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 31 Aug 2010 20:13:28 +0000 (13:13 -0700)]
Move ObjectDirectory streaming limit to WindowCacheConfig
IDEs like Eclipse offer up the settings in WindowCacheConfig to the
user as a global set of options that are configured for the entire
JVM process, not per-repository, as the cache is shared across the
entire JVM. The limit on how much we are willing to allocate for
an object buffer is similar to the limit on how much we can use for
data caches, allocating that much space impacts the entire JVM and
not just a single repository, so it should be a global limit.
Change-Id: I22eafb3e223bf8dea57ece82cd5df8bfe5badebc Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the iterators passed into a diff formatter are working tree
iterators, we should enable ignoring files that are ignored, as
well as actually pull up the current content from the working tree
rather than getting it from the repository.
Because we abstract away the working directory access logic,
we can now actually support rename detection between the working
directory and the local repository when using a DiffFormatter.
This means its possible for an application to show an unstaged
delete-add pair as a rename if the add path is not ignored.
(Because the ignored file wouldn't show up in our difference output.)
Even more interesting is we can now do rename detection between any
two working trees, if both input iterators are WorkingTreeIterators.
Unfortunately we don't (yet) optimize for comparing the working
tree with the index involved so we can take advantage of cached
stat data to rule out non-dirty paths.
Change-Id: I4c0598afe48d8f99257266bf447a0ecd23ca7f5e Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix TreeWalk bug comparing DirCache and WorkingTree with ANY_DIFF
When comparing a DirCache and a WorkingTree using ANY_DIFF we
sometimes didn't recursive into a subtree of both sides gave us
zeroId() back for the identity of a subtree. This happens when the
DirCache doesn't have a valid cache tree for the subtree, as then
it uses zeroId() for the ObjectId of the subtree, which then appears
to be equal to the zeroId() of the WorkingTreeIterator's subtree.
We work around this by adding a hasId() method that returns true
only if this iterator has a valid ObjectId. The idEquals method
on TreeWalk than only performs a compare between two iterators if
both iterators have a valid id.
Change-Id: I695f7fafbeb452e8c0703a05c02921fae0822d3f Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Move rename detection, path following into DiffFormatter
Applications just want a quick way to configure our diff
implementation, and then just want to use it without a lot of fuss.
Move all of the rename detection logic and path following logic
out of our pgm package and into DiffFormatter itself, making it
much easier for a GUI to take advantage of the features without
duplicating a lot of code.
Change-Id: I4b54e987bb6dc804fb270cbc495fe4cae26c7b0e Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sorting the array can be useful when its being used as a map of pairs
that are appended into the array and then later merge-joined against
another array of similar semantics.
Change-Id: I2e346ef5c99ed1347ec0345b44cda0bc29d03e90 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We know exactly how many lines we need by the time we compute our
per-line hashes, as we have already built the lines IntList to give
us the starting position of each line in the buffer. Using that
we can properly size the array, and don't need the dynamic growing
feature of IntList. So drop the indirection and just use a fixed
size array.
Change-Id: I5c8c592514692a8abff51e5928aedcf71e100365 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add toString and improve Javadoc of NotIgnoredFilter
Today while debugging some TreeWalk related code I noticed this
filter did not have a toString(), making it harder to see what the
filter graph was at a glance in the debugger. Add a toString()
for debugging to match other TreeFilters, and clean up the Javadoc
slightly so its a bit more clear about the purpose of the filter.
While we are mucking about with some of this code, simplify
the logic of include so its shorter and thus faster to read.
The pattern now more closely matches that of SkipWorkTreeFilter.
Change-Id: Iad433a1fa6b395dc1acb455aca268b9ce2f1d41b Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows callers to force the iterator back to its starting point,
so it can be traversed again. The default way to do this is to use
back(1) until first() is true, but this isn't very efficient for any
iterator. All current implementations have better ways to implement
reset without needing to seek backwards.
Change-Id: Ia26e6c852fdac8a0e9c80ac72c8cca9d897463f4 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we are asked to create a difference between two files the caller
really wants to see that output. Instead of punting because a file
is too big to process, consider it to be binary. This reduces the
accuracy of our output display, but makes it a lot more likely that
the formatter can still generate something semi-useful.
We set our default binary threshold to 50 MiB, which is the same
threshold that PackWriter uses before punting and deciding a file
is too big to delta compress. Anything under this size we try to
load and process, anything over that size (or that won't allocate
in the heap) gets tagged as binary.
Change-Id: I69553c9ef96db7f2058c6210657f1181ce882335 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When adding or deleting a file, we shouldn't ever prefix /dev/null
with the a/ or b/ prefixes. Doing so is a mistake and confuses a
patch parser which handles /dev/null magically, while a/dev/null is
a file called null in the dev directory of the project.
Also when adding or deleting the "diff --git" line has the "real"
path on both sides, so we should see the following when adding the
file called foo:
diff --git a/foo b/foo
--- /dev/null
+++ b/foo
The --- and +++ lines do not appear in a pure rename or copy delta,
C Git diff seems to omit these, so we now omit them as well. We also
omit the index line when the ObjectIds are exactly equal.
Change-Id: Ic46892dea935ee8bdee29088aab96307d7ec6d3d Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of trying to stream out the header, we can drop a redundant
code path by formatting the header into a temporary buffer and then
streaming out the actual line differences later.
Its a small amount of unnecessary work to buffer the file header,
but these are typically very tiny so the cost to format and reparse
is relatively low.
Change-Id: Id14a527a74ee0bd7e07f46fdec760c22b02d5bdf Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Marc Strapetz [Wed, 1 Sep 2010 15:14:16 +0000 (17:14 +0200)]
Add FS.detect() for detection of file system abstraction.
To give the user more control on which file system abstraction
should be used on Windows, FS.detect() may be configured
to assume a Cygwin installation or nor.
Currently, if a branch is created that has special chars ('#' in the bug),
Config will surround the subsection name with double quotes during
it's toText method which will result in an invalid file after saving the
Config.
Marc Strapetz [Tue, 31 Aug 2010 11:26:29 +0000 (13:26 +0200)]
Partial support for index file format "3".
Extended flags are processed and available via DirCacheEntry's
new isSkipWorkTree() and isIntentToAdd() methods. "resolve-undo"
information is completely ignored since its an optional extension.
Improve MergeAlgorithm to produce smaller conflicts
The merge algorithm was reporting conflicts which where to big.
Example: The common base was "ABC", the "ours" version contained
"AB1C" (the addition of "1" after pos 2) and the "theirs" version also
contained "AB1C". We have two potentially conflicting edits in the
same region which happen to bring in exactly the same content. This
should not be a conflict - but was previously reported as
"AB<<<1===1>>>C".
This is fixed by checking every conflicting chunk whether the
conflicting regions have a common prefix or suffix and by removing
this regions from the conflict.
Change-Id: I4dc169b8ef7a66ec6b307e9a956feef906c9e15e Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This adds the first merge strategy to JGit which does real
content-merges if necessary. The new merge strategy "resolve" takes as
input three commits: a common base, ours and theirs. It will simply takeover
changes on files which are only touched in ours or theirs. For files
touched in ours and theirs it will try to merge the two contents
knowing taking into account the specified common base.
Rename detection has not been introduced for now.
Change-Id: I49a5ebcdcf4f540f606092c0f1dc66c965dc66ba Signed-off-by: Christian Halstrick <christian.halstrick@sap.com> Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Matthias Sohn [Sun, 29 Aug 2010 21:41:10 +0000 (23:41 +0200)]
Wait for JIT optimization before measuring diff performance
On Mac OS X MyerDiffPerformanceTest was failing since during the
first few tests the JIT compiler is running in parallel slowing down
the tests. When setting the JVM option -Xbatch forcing the JIT to do
its work prior to running the code this effect can be avoided. Instead
we chose to run some tests without recording prior to the recorded
tests since relying on -X JVM parameters isn't portable across JVMs.
Use 10k * powers of 2 as sample size instead of odd numbers used
before and also improve formatting of performance readings.
Bug: 323766
Change-Id: I9a46d73f81a785f399d3cf5a90c8c0516526e048 Signed-off-by: Matthias Sohn <matthias.sohn@sap.com> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Matthias Sohn [Fri, 27 Aug 2010 23:18:20 +0000 (01:18 +0200)]
Generate source plugin and source feature for jgit
Change-Id: Ibc5a302078bfc01d9ee45a4c0ab0b79b2abd185a Signed-off-by: Matthias Sohn <matthias.sohn@sap.com> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Shawn O. Pearce [Mon, 30 Aug 2010 18:53:25 +0000 (11:53 -0700)]
Improve LargeObjectException reporting
Use 3 different types of LargeObjectException for the 3 major ways
that we can fail to load an object. For each of these use a unique
string translation which describes the root cause better than just
the ObjectId.name() does.
Change-Id: I810c98d5691b74af9fc6cbd46fc9879e35a7bdca Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 30 Aug 2010 18:01:33 +0000 (11:01 -0700)]
IndexPack: Use byte limited form of getCachedBytes
Currently our algorithm requires that we have the delta base as
a contiguous byte array... but getCachedBytes() might not work
if the object is considered to be large by its underlying loader.
Use the limited form to obtain the object as a byte array instead.
Change-Id: I33f12a8811cb6a4a67396174733f209db8119b42 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 30 Aug 2010 17:58:19 +0000 (10:58 -0700)]
Undo translation of protocol string 'unpack error'
This string is part of the network protocol, and isn't meant to
be translated into another language. Clients actually scan for
the string "unpack error " off the wire and react magically to
this information. If it were translated, they would instead have
a protocol exception, which isn't very useful when there is already
an error occurring.
Change-Id: Ia5dc8d36ba65ad2552f683bb637e80b77a7d92f0 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Fri, 27 Aug 2010 20:28:14 +0000 (13:28 -0700)]
Buffer very large delta streams to reduce explosion of CPU work
Large delta streams are unpacked incrementally, but because a delta
can seek to a random position in the base to perform a copy we may
need to inflate the base repeatedly just to complete one delta.
So work around it by copying the base to a temporary file, and then
we can read from that temporary file using random seeks instead.
Its far more efficient because we now only need to inflate the
base once.
This is still really ugly because we have to dump to a temporary
file, but at least the code can successfully process a large
file without throwing OutOfMemoryError. If speed is an
issue, the user will need to increase the JVM heap and ensure
core.streamFileThreshold is set to a higher value, so we don't use
this code path as often.
Unfortunately we lose the "optimization" of skipping over portions
of a delta base that we don't actually need in the final result.
This is going to cause us to inflate and write to disk useless
regions that were deleted and do not appear in the final result.
We could later improve on our code by trying to flatten delta
instruction streams before we touch the bottom base object, and
then only store the portions of the base we really need for the
final result and that appear out-of-order. Since that is some
pretty complex code I'm punting on it for now and just doing this
simple whole-object buffering.
Because the process umask might be permitting other users to read
files we create, we put the temporary buffers into $GIT_DIR/objects.
We can reasonably assume that if a reader can read our temporary
buffer file in that directory, they can also read the base pack
file we are pulling it from and therefore its not a security breach
to expose the inflated content in a file. This requires a reader
to have write access to the repository, but only if the file is
really big. I'd rather err on the side of caution here and refuse
to read a very big file into /tmp than to possibly expose a secured
content because the Java 5 JVM won't let us create a protected
temporary file that only the current user can access.
Change-Id: I66fb80b08cbcaf0f65f2db0462c546a495a160dd Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Chris Aniszczyk [Thu, 12 Aug 2010 16:25:31 +0000 (11:25 -0500)]
Add TagCommand
A tag command is added to the Git porcelain API. Tests were
also added to stress test the tag command.
Change-Id: Iab282a918eb51b0e9c55f628a3396ff01c9eb9eb Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implementation of a checkout (or 'git read-tree') operation which
works together with DirCache. This implementation does similar things
as WorkDirCheckout which main problem is that it works with deprecated
GitIndex. Since GitIndex doesn't support multiple stages of a file
which is required in merge situations this new implementation is
required to enable merge support.
Change-Id: I13f0f23ad60d98e5168118a7e7e7308e066ecf9c Signed-off-by: Christian Halstrick <christian.halstrick@sap.com> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
The Merger was was only exposing the merge base as an
AbstractTreeIterator. Since we need the merge base as
RevCommit to generate the merge result I expose it here.
Change-Id: Ibe846370a35ac9bdb0c97ce2e36b2287577fbcad Signed-off-by: Christian Halstrick <christian.halstrick@sap.com> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Marc Strapetz [Thu, 19 Aug 2010 13:34:44 +0000 (15:34 +0200)]
Fix parsing of multiple authors in PersonIdent.
PersonIdent should be parsable for an invalid commit which
contains multiple authors, like "A <a@a.org>, B <b@b.org>".
PersonIdent(String) constructor now delegates to
RawParseUtils.parsePersonIdent().
Shawn O. Pearce [Thu, 26 Aug 2010 00:05:31 +0000 (17:05 -0700)]
Increase the default streaming threshold to 15 MiB
Applying deltas in the large streaming mode is horrifically slow.
Trying to pack icu4c is impossible because a single 11 MiB file
sits on top of a 15 MiB file though a 10 deep delta chain, which
results in this very slow inflate process.
Upping the default limit to 15 MiB lets us process this large in a
reasonable time, but its still sufficiently low enough to prevent
exploding the heap of a very large process like Eclipse or Gerrit
Code Review.
We have to revisit the streaming delta application process and do
something much smarter, like flatten the delta chain before we apply
it to the base. But even that is ugly, I've seen a 155 MiB delta
sitting on top of a 450 MiB file to produce a 300 MiB result object.
If the chain is deep, we may have trouble flatting it down.
Change-Id: If5a0dcbf9d14ea683d75546f104b09bb8cd8fdbb Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 25 Aug 2010 23:46:43 +0000 (16:46 -0700)]
Fix reuse from pack file for REF_DELTA types
We miscomputed the CRC32 checksum for a REF_DELTA type of object, by
not including the full 20 byte ObjectId of the delta base in the CRC
code we use when the delta is too large to go through our two faster
small reuse code paths. This resulted in a corruption error during
packing, where the PackFile erroneously suspected the data was wrong
on the local filesystem and aborted writing, because the CRC didn't
match what we had read from the index.
Change-Id: I7d12cdaeaf2c83ddc11223ce0108d9bd6886e025 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 25 Aug 2010 00:35:52 +0000 (17:35 -0700)]
Support parsing git describe style output
We now match on the -gABBREV style output created by git describe
when its describing a non-tagged commit, and resolve that back to
the full ObjectId using the abbreviation resolution feature that
we already support.
Change-Id: Ib3033f9483d9e1c66c8bb721ff48d4485bcdaef1 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 23:26:40 +0000 (16:26 -0700)]
Throw AmbiguousObjectException during resolve if its ambiguous
Its wrong to return null if we are resolving an abbreviation and we
have proven it matches more than one object. We know how to resolve
it if we had more nybbles, as there are two or more objects with the
same prefix. Declare that to the caller quite clearly by giving them
an AmbiguousObjectException.
Change-Id: I01bb48e587e6d001b93da8575c2c81af3eda5a32 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 22:50:36 +0000 (15:50 -0700)]
Complete an abbreviation when formatting a patch
If we are given a DiffEntry header that already has abbreviated
ObjectIds on it, we may still be able to resolve those locally and
output the difference. Try to do that through the new resolve API
on ObjectReader.
Change-Id: I0766aa5444b7b8fff73620290f8c9f54adc0be96 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 19:50:59 +0000 (12:50 -0700)]
Use limited getCachedBytes in RevWalk
Parsing is rewritten to use the size limited form of getCachedBytes,
thus freeing the revwalk infrastructure from needing to care about
a large object vs. a small object when it gets an ObjectLoader.
Right now we hardcode our upper bound for a commit or annotated
tag to be 15 MiB. I don't know of any that is more than 1 MiB in
the wild, so going 15x that should give us some reasonable headroom.
Change-Id: If296c211d8b257d76e44908504e71dd9ba70ffa8 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 19:46:56 +0000 (12:46 -0700)]
Add brute force byte array loading to ObjectLoader
Some algorithms are coded in a way that requires us to provide them
the entire object contents as a contiguous byte array. The parsers
in RevCommit and RevTag, or our RawText objects are really good
examples of these.
Instead of duplicating this logic everywhere, lets put it into the
base ObjectLoader type. That way the caller only needs to give us
their upper size bound, and we'll do the rest of the heavy work to
figure out if the object still fits within that bound, and get them
an array that has the complete contents.
Change-Id: Id95a7f79d2b97e39f6949370ccca2f2c9cfb1a0f Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Shawn O. Pearce [Tue, 24 Aug 2010 23:11:41 +0000 (16:11 -0700)]
Add ObjectId to the LargeObjectException
A chunk of code that throws LargeObjectException may or may not have
the specific ObjectId on hand when its thrown. If it does, we want
to cache it in the exception, and put that in the message. If it is
missing we want to be able to set it later from a higher level stack
frame that does have the object handy.
Change-Id: Ife25546158868bdfa886037e4493ef8235ebe4b9 Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Shawn O. Pearce [Tue, 24 Aug 2010 19:59:10 +0000 (12:59 -0700)]
Don't copy more than the object size
If the loader's stream is broken and returns to us more content
than it originally declared as the size of the object, don't
copy that onto the output stream. Instead throw EOFException
and abort fast. This way we don't follow an infinite stream,
but instead will at least stop when the size was reached.
Change-Id: I7ec0c470c875f03b1f12a74a9b4d2f6e73b659bb Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Tue, 24 Aug 2010 19:56:47 +0000 (12:56 -0700)]
Use the ObjectStream size during copyTo
If the stream is a delta decompression stream, getting the size
can be expensive. Its cheaper to get it from the stream itself
rather than from the object loader.
Change-Id: Ia7f0af98681f6d56ea419a48c6fa8eea09274b28 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Wed, 25 Aug 2010 00:20:50 +0000 (17:20 -0700)]
Fix ObjectDirectory abbreviation resolution to notice new packs
If we can't resolve an abbreviation, it might be because there is
a new pack file we haven't picked up yet. Try scanning the packs
again and recheck each pack if there were differences from the last
scan we did.
Because of this, we don't have to open a pack during the test where
we generate a pack on the fly. We'll miss on the first loop during
which the PackList is the NO_PACKS magic initialization constant,
and pick up the newly created index during this retry logic.
Change-Id: I7b97efb29a695ee60c90818be380f7ea23ad13a3 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 22:53:11 +0000 (15:53 -0700)]
Fully implement SHA-1 abbreviations
ObjectReader implementations are now responsible for creating the
unique abbreviation of an ObjectId, or for resolving an abbreviation
back to its full form. In this latter case the reader can offer up
multiple candidates to the caller, who may be able to disambiguate
them based on context.
Repository.resolve() doesn't take multiple candidates into account
right now, but it could in the future by looking for a remaining
^0 or ^{commit} suffix and take an expansion if there is only one
commit that matches the input abbreviation. It could also use
the distance from an annotated tag to resolve "tag-NNN-gcommit"
style strings that are often output by `git describe`.
Change-Id: Icd3250adc8177ae05278b858933afdca0cbbdb56 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 17:30:58 +0000 (10:30 -0700)]
Add openEntryStream to WorkingTreeIterator
This makes it easier for abstract tools like AddCommand to open the
file from the working tree, without knowing internal details about
how the tree is managed.
Change-Id: Ie64a552f07895d67506fbffb3ecf1c1be8a7b407 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 23 Aug 2010 17:29:50 +0000 (10:29 -0700)]
Add setLength(long) to DirCacheEntry
Applications should favor the long style interface, especially when
their source input is a long type, e.g. coming from java.io.File.
This way when the index format is later changed to support a
larger file size than 2 GiB we can handle it by just changing the
entry code, and not need to fix a lot of applications.
Change-Id: I332563caeb110014e2d544dc33050ce67ae9e897 Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
projects / jgit.git / log