From fe6953a2ab3136dd85b7e20dcfdfb190e78795fc Mon Sep 17 00:00:00 2001 From: Lars Grefer Date: Sat, 15 Aug 2020 20:29:23 +0200 Subject: Update to Maven 3.6.3 Signed-off-by: Lars Grefer --- mvnw.cmd | 343 +++++++++++++++++++++++++++++++++------------------------------ 1 file changed, 182 insertions(+), 161 deletions(-) mode change 100755 => 100644 mvnw.cmd (limited to 'mvnw.cmd') diff --git a/mvnw.cmd b/mvnw.cmd old mode 100755 new mode 100644 index 48363fa60..86115719e --- a/mvnw.cmd +++ b/mvnw.cmd @@ -1,161 +1,182 @@ -@REM ---------------------------------------------------------------------------- -@REM Licensed to the Apache Software Foundation (ASF) under one -@REM or more contributor license agreements. See the NOTICE file -@REM distributed with this work for additional information -@REM regarding copyright ownership. The ASF licenses this file -@REM to you under the Apache License, Version 2.0 (the -@REM "License"); you may not use this file except in compliance -@REM with the License. You may obtain a copy of the License at -@REM -@REM http://www.apache.org/licenses/LICENSE-2.0 -@REM -@REM Unless required by applicable law or agreed to in writing, -@REM software distributed under the License is distributed on an -@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY -@REM KIND, either express or implied. See the License for the -@REM specific language governing permissions and limitations -@REM under the License. -@REM ---------------------------------------------------------------------------- - -@REM ---------------------------------------------------------------------------- -@REM Maven2 Start Up Batch script -@REM -@REM Required ENV vars: -@REM JAVA_HOME - location of a JDK home dir -@REM -@REM Optional ENV vars -@REM M2_HOME - location of maven2's installed home dir -@REM MAVEN_BATCH_ECHO - set to 'on' to enable the echoing of the batch commands -@REM MAVEN_BATCH_PAUSE - set to 'on' to wait for a key stroke before ending -@REM MAVEN_OPTS - parameters passed to the Java VM when running Maven -@REM e.g. to debug Maven itself, use -@REM set MAVEN_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000 -@REM MAVEN_SKIP_RC - flag to disable loading of mavenrc files -@REM ---------------------------------------------------------------------------- - -@REM Begin all REM lines with '@' in case MAVEN_BATCH_ECHO is 'on' -@echo off -@REM set title of command window -title %0 -@REM enable echoing my setting MAVEN_BATCH_ECHO to 'on' -@if "%MAVEN_BATCH_ECHO%" == "on" echo %MAVEN_BATCH_ECHO% - -@REM set %HOME% to equivalent of $HOME -if "%HOME%" == "" (set "HOME=%HOMEDRIVE%%HOMEPATH%") - -@REM Execute a user defined script before this one -if not "%MAVEN_SKIP_RC%" == "" goto skipRcPre -@REM check for pre script, once with legacy .bat ending and once with .cmd ending -if exist "%HOME%\mavenrc_pre.bat" call "%HOME%\mavenrc_pre.bat" -if exist "%HOME%\mavenrc_pre.cmd" call "%HOME%\mavenrc_pre.cmd" -:skipRcPre - -@setlocal - -set ERROR_CODE=0 - -@REM To isolate internal variables from possible post scripts, we use another setlocal -@setlocal - -@REM ==== START VALIDATION ==== -if not "%JAVA_HOME%" == "" goto OkJHome - -echo. -echo Error: JAVA_HOME not found in your environment. >&2 -echo Please set the JAVA_HOME variable in your environment to match the >&2 -echo location of your Java installation. >&2 -echo. -goto error - -:OkJHome -if exist "%JAVA_HOME%\bin\java.exe" goto init - -echo. -echo Error: JAVA_HOME is set to an invalid directory. >&2 -echo JAVA_HOME = "%JAVA_HOME%" >&2 -echo Please set the JAVA_HOME variable in your environment to match the >&2 -echo location of your Java installation. >&2 -echo. -goto error - -@REM ==== END VALIDATION ==== - -:init - -@REM Find the project base dir, i.e. the directory that contains the folder ".mvn". -@REM Fallback to current working directory if not found. - -set MAVEN_PROJECTBASEDIR=%MAVEN_BASEDIR% -IF NOT "%MAVEN_PROJECTBASEDIR%"=="" goto endDetectBaseDir - -set EXEC_DIR=%CD% -set WDIR=%EXEC_DIR% -:findBaseDir -IF EXIST "%WDIR%"\.mvn goto baseDirFound -cd .. -IF "%WDIR%"=="%CD%" goto baseDirNotFound -set WDIR=%CD% -goto findBaseDir - -:baseDirFound -set MAVEN_PROJECTBASEDIR=%WDIR% -cd "%EXEC_DIR%" -goto endDetectBaseDir - -:baseDirNotFound -set MAVEN_PROJECTBASEDIR=%EXEC_DIR% -cd "%EXEC_DIR%" - -:endDetectBaseDir - -IF NOT EXIST "%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config" goto endReadAdditionalConfig - -@setlocal EnableExtensions EnableDelayedExpansion -for /F "usebackq delims=" %%a in ("%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config") do set JVM_CONFIG_MAVEN_PROPS=!JVM_CONFIG_MAVEN_PROPS! %%a -@endlocal & set JVM_CONFIG_MAVEN_PROPS=%JVM_CONFIG_MAVEN_PROPS% - -:endReadAdditionalConfig - -SET MAVEN_JAVA_EXE="%JAVA_HOME%\bin\java.exe" -set WRAPPER_JAR="%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.jar" -set WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain - -set DOWNLOAD_URL="https://repo.maven.apache.org/maven2/io/takari/maven-wrapper/0.4.2/maven-wrapper-0.4.2.jar" -FOR /F "tokens=1,2 delims==" %%A IN (%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties) DO ( - IF "%%A"=="wrapperUrl" SET DOWNLOAD_URL=%%B -) - -@REM Extension to allow automatically downloading the maven-wrapper.jar from Maven-central -@REM This allows using the maven wrapper in projects that prohibit checking in binary data. -if exist %WRAPPER_JAR% ( - echo Found %WRAPPER_JAR% -) else ( - echo Couldn't find %WRAPPER_JAR%, downloading it ... - echo Downloading from: %DOWNLOAD_URL% - powershell -Command "(New-Object Net.WebClient).DownloadFile('%DOWNLOAD_URL%', '%WRAPPER_JAR%')" - echo Finished downloading %WRAPPER_JAR% -) -@REM End of extension - -%MAVEN_JAVA_EXE% %JVM_CONFIG_MAVEN_PROPS% %MAVEN_OPTS% %MAVEN_DEBUG_OPTS% -classpath %WRAPPER_JAR% "-Dmaven.multiModuleProjectDirectory=%MAVEN_PROJECTBASEDIR%" %WRAPPER_LAUNCHER% %MAVEN_CONFIG% %* -if ERRORLEVEL 1 goto error -goto end - -:error -set ERROR_CODE=1 - -:end -@endlocal & set ERROR_CODE=%ERROR_CODE% - -if not "%MAVEN_SKIP_RC%" == "" goto skipRcPost -@REM check for post script, once with legacy .bat ending and once with .cmd ending -if exist "%HOME%\mavenrc_post.bat" call "%HOME%\mavenrc_post.bat" -if exist "%HOME%\mavenrc_post.cmd" call "%HOME%\mavenrc_post.cmd" -:skipRcPost - -@REM pause the script if MAVEN_BATCH_PAUSE is set to 'on' -if "%MAVEN_BATCH_PAUSE%" == "on" pause - -if "%MAVEN_TERMINATE_CMD%" == "on" exit %ERROR_CODE% - -exit /B %ERROR_CODE% +@REM ---------------------------------------------------------------------------- +@REM Licensed to the Apache Software Foundation (ASF) under one +@REM or more contributor license agreements. See the NOTICE file +@REM distributed with this work for additional information +@REM regarding copyright ownership. The ASF licenses this file +@REM to you under the Apache License, Version 2.0 (the +@REM "License"); you may not use this file except in compliance +@REM with the License. You may obtain a copy of the License at +@REM +@REM http://www.apache.org/licenses/LICENSE-2.0 +@REM +@REM Unless required by applicable law or agreed to in writing, +@REM software distributed under the License is distributed on an +@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +@REM KIND, either express or implied. See the License for the +@REM specific language governing permissions and limitations +@REM under the License. +@REM ---------------------------------------------------------------------------- + +@REM ---------------------------------------------------------------------------- +@REM Maven Start Up Batch script +@REM +@REM Required ENV vars: +@REM JAVA_HOME - location of a JDK home dir +@REM +@REM Optional ENV vars +@REM M2_HOME - location of maven2's installed home dir +@REM MAVEN_BATCH_ECHO - set to 'on' to enable the echoing of the batch commands +@REM MAVEN_BATCH_PAUSE - set to 'on' to wait for a keystroke before ending +@REM MAVEN_OPTS - parameters passed to the Java VM when running Maven +@REM e.g. to debug Maven itself, use +@REM set MAVEN_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000 +@REM MAVEN_SKIP_RC - flag to disable loading of mavenrc files +@REM ---------------------------------------------------------------------------- + +@REM Begin all REM lines with '@' in case MAVEN_BATCH_ECHO is 'on' +@echo off +@REM set title of command window +title %0 +@REM enable echoing by setting MAVEN_BATCH_ECHO to 'on' +@if "%MAVEN_BATCH_ECHO%" == "on" echo %MAVEN_BATCH_ECHO% + +@REM set %HOME% to equivalent of $HOME +if "%HOME%" == "" (set "HOME=%HOMEDRIVE%%HOMEPATH%") + +@REM Execute a user defined script before this one +if not "%MAVEN_SKIP_RC%" == "" goto skipRcPre +@REM check for pre script, once with legacy .bat ending and once with .cmd ending +if exist "%HOME%\mavenrc_pre.bat" call "%HOME%\mavenrc_pre.bat" +if exist "%HOME%\mavenrc_pre.cmd" call "%HOME%\mavenrc_pre.cmd" +:skipRcPre + +@setlocal + +set ERROR_CODE=0 + +@REM To isolate internal variables from possible post scripts, we use another setlocal +@setlocal + +@REM ==== START VALIDATION ==== +if not "%JAVA_HOME%" == "" goto OkJHome + +echo. +echo Error: JAVA_HOME not found in your environment. >&2 +echo Please set the JAVA_HOME variable in your environment to match the >&2 +echo location of your Java installation. >&2 +echo. +goto error + +:OkJHome +if exist "%JAVA_HOME%\bin\java.exe" goto init + +echo. +echo Error: JAVA_HOME is set to an invalid directory. >&2 +echo JAVA_HOME = "%JAVA_HOME%" >&2 +echo Please set the JAVA_HOME variable in your environment to match the >&2 +echo location of your Java installation. >&2 +echo. +goto error + +@REM ==== END VALIDATION ==== + +:init + +@REM Find the project base dir, i.e. the directory that contains the folder ".mvn". +@REM Fallback to current working directory if not found. + +set MAVEN_PROJECTBASEDIR=%MAVEN_BASEDIR% +IF NOT "%MAVEN_PROJECTBASEDIR%"=="" goto endDetectBaseDir + +set EXEC_DIR=%CD% +set WDIR=%EXEC_DIR% +:findBaseDir +IF EXIST "%WDIR%"\.mvn goto baseDirFound +cd .. +IF "%WDIR%"=="%CD%" goto baseDirNotFound +set WDIR=%CD% +goto findBaseDir + +:baseDirFound +set MAVEN_PROJECTBASEDIR=%WDIR% +cd "%EXEC_DIR%" +goto endDetectBaseDir + +:baseDirNotFound +set MAVEN_PROJECTBASEDIR=%EXEC_DIR% +cd "%EXEC_DIR%" + +:endDetectBaseDir + +IF NOT EXIST "%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config" goto endReadAdditionalConfig + +@setlocal EnableExtensions EnableDelayedExpansion +for /F "usebackq delims=" %%a in ("%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config") do set JVM_CONFIG_MAVEN_PROPS=!JVM_CONFIG_MAVEN_PROPS! %%a +@endlocal & set JVM_CONFIG_MAVEN_PROPS=%JVM_CONFIG_MAVEN_PROPS% + +:endReadAdditionalConfig + +SET MAVEN_JAVA_EXE="%JAVA_HOME%\bin\java.exe" +set WRAPPER_JAR="%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.jar" +set WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain + +set DOWNLOAD_URL="https://repo.maven.apache.org/maven2/io/takari/maven-wrapper/0.5.6/maven-wrapper-0.5.6.jar" + +FOR /F "tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO ( + IF "%%A"=="wrapperUrl" SET DOWNLOAD_URL=%%B +) + +@REM Extension to allow automatically downloading the maven-wrapper.jar from Maven-central +@REM This allows using the maven wrapper in projects that prohibit checking in binary data. +if exist %WRAPPER_JAR% ( + if "%MVNW_VERBOSE%" == "true" ( + echo Found %WRAPPER_JAR% + ) +) else ( + if not "%MVNW_REPOURL%" == "" ( + SET DOWNLOAD_URL="%MVNW_REPOURL%/io/takari/maven-wrapper/0.5.6/maven-wrapper-0.5.6.jar" + ) + if "%MVNW_VERBOSE%" == "true" ( + echo Couldn't find %WRAPPER_JAR%, downloading it ... + echo Downloading from: %DOWNLOAD_URL% + ) + + powershell -Command "&{"^ + "$webclient = new-object System.Net.WebClient;"^ + "if (-not ([string]::IsNullOrEmpty('%MVNW_USERNAME%') -and [string]::IsNullOrEmpty('%MVNW_PASSWORD%'))) {"^ + "$webclient.Credentials = new-object System.Net.NetworkCredential('%MVNW_USERNAME%', '%MVNW_PASSWORD%');"^ + "}"^ + "[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; $webclient.DownloadFile('%DOWNLOAD_URL%', '%WRAPPER_JAR%')"^ + "}" + if "%MVNW_VERBOSE%" == "true" ( + echo Finished downloading %WRAPPER_JAR% + ) +) +@REM End of extension + +@REM Provide a "standardized" way to retrieve the CLI args that will +@REM work with both Windows and non-Windows executions. +set MAVEN_CMD_LINE_ARGS=%* + +%MAVEN_JAVA_EXE% %JVM_CONFIG_MAVEN_PROPS% %MAVEN_OPTS% %MAVEN_DEBUG_OPTS% -classpath %WRAPPER_JAR% "-Dmaven.multiModuleProjectDirectory=%MAVEN_PROJECTBASEDIR%" %WRAPPER_LAUNCHER% %MAVEN_CONFIG% %* +if ERRORLEVEL 1 goto error +goto end + +:error +set ERROR_CODE=1 + +:end +@endlocal & set ERROR_CODE=%ERROR_CODE% + +if not "%MAVEN_SKIP_RC%" == "" goto skipRcPost +@REM check for post script, once with legacy .bat ending and once with .cmd ending +if exist "%HOME%\mavenrc_post.bat" call "%HOME%\mavenrc_post.bat" +if exist "%HOME%\mavenrc_post.cmd" call "%HOME%\mavenrc_post.cmd" +:skipRcPost + +@REM pause the script if MAVEN_BATCH_PAUSE is set to 'on' +if "%MAVEN_BATCH_PAUSE%" == "on" pause + +if "%MAVEN_TERMINATE_CMD%" == "on" exit %ERROR_CODE% + +exit /B %ERROR_CODE% -- cgit v1.2.3