[[antTasks]]
= AspectJ Ant Tasks

[[antTasks-intro]]
== Introduction

AspectJ contains a compiler, `ajc`, that can be run from Ant. Included
in the `aspectjtools.jar` are Ant binaries to support three ways of
running the compiler:

[arabic]
. xref:#antTasks-iajc[AjcTask (iajc)], a task to run the AspectJ
post-1.1 compiler, which supports all the eclipse and ajc options,
including incremental mode.
. xref:#antTasks-adapter[Ajc11CompilerAdapter (javac)], an adapter class
to run the new compiler using Javac tasks by setting the build.compiler
property
. xref:#antTasks-ajc[Ajc10 (ajc)], a task to run build scripts
compatible with the AspectJ 1.0 tasks

This describes how to install and use the tasks and the adapter. For an
example Ant script, see xref:../examples/build.xml[examples/build.xml].

[[antTasks-install]]
== Installing Ant Tasks

Install Jakarta Ant 1.5.1: Please see the official Jakarta Ant website
for more information and the 1.5.1 distribution. This release is
source-compatible with Ant 1.3 and Ant 1.4, but the task sources must be
compiled with those versions of the Ant libraries to be used under those
versions of Ant. Sources are available under the Eclipse Public License
v 2.0 at https://eclipse.org/aspectj.

In Ant 1.5, third-party tasks can be declared using a taskdef entry in
the build script, to identify the name and classes. When declaring a
task, include the `aspectjtools.jar` either in the taskdef classpath or
in `$\{ANT_HOME}/lib` where it will be added to the system class path by
the ant script. You may specify the task script names directly, or use
the "resource" attribute to specify the default names:

[source, xml]
....
<taskdef resource="org/aspectj/tools/ant/taskdefs/aspectjTaskdefs.properties"/>
....

The current resource file retains the name "ajc" for the Ajc10 task, and
uses "iajc" for the AspectJ post-1.1 task.

In Ant 1.6, third-party tasks are declared in their own namespace using
`antlib.xml`. For example, the following script would build and run the
spacewar example, if you put the script in the examples directory and
`aspectjtools.jar` in the `$\{ANT_HOME}/lib` directory.

[source, xml]
....
<project name="aspectj-ant1.6" default="spacewar"
    xmlns:aspectj="antlib:org.aspectj" basedir=".">
    <target name="spacewar">
        <aspectj:iajc
            argfiles="spacewar/debug.lst"
            outjar="spacewar.jar"
            classpath="../../lib/aspectjrt.jar"
       />
       <java classname="spacewar.Game"
        classpath="spacewar.jar:../../lib/aspectjrt.jar"/>
    </target>
</project>
....

For more information on using Ant, please refer to Jakarta's
documentation on integrating user-defined Ant tasks into builds.

[[antTasks-iajc]]
== AjcTask (iajc)

This task uses the AspectJ post-1.1 compiler ajc. The AspectJ compiler
can be used like Javac to compile Java sources, but it can also compile
AspectJ sources or weave binary aspects with Java bytecode. It can run
in normal "batch" mode or in an "incremental" mode, where it only
recompiles files it has to revisit. For more information on ajc, see
xref:ajc.adoc[`ajc`, the AspectJ compiler/weaver]. Unlike Javac or the Javac Ant task, this task always
compiles the specified files since aspects can apply to other (updated)
files. For a workaround, see xref:#antTasks-iajc-uptodate[Avoiding clean
compiles].

Beyond the normal ajc compiler options, this task also supports an
experimental option for an incremental "tag" file, and it can copy
resources from source directories or input jars to the output jar or
directory.

This task is named iajc to avoid conflict with the 1.0 task ajc.

[[antTasks-iajc-options]]
=== AjcTask (iajc) Options

The following tables list the supported parameters. For any parameter
specified as a Path, a single path can be specified directly as an
attribute, multiple paths can be specified using a nested element of the
same name, and a common path can be reused by defining it as a global
and passing the id to the corresponding \{name}ref attribute. See
xref:#antTasks-iajc-paths[Path] below for more details.

Most attributes and nested elements are optional. The compiler requires
that the same version of `aspectjrt.jar` be specified on the classpath,
and that some sources be be specified (using one or more of
`sourceroots`, `injars`, `inpath`, `argfiles`, and/or `srcdir` (with
patterns)). When in incremental mode, only `sourceroots` may be
specified.

Boolean parameters default to `false` unless otherwise stated.

*AjcTask (iajc) options for specifying sources*

[cols=",",options="header",]
|===
|Attribute |Description
|argfiles, argfilesRef (xref:#antTasks-iajc-paths[Path]) |An argument
file contains a list of arguments read by the compiler. Each line is
read into one element of the argument array and may include another
argfile by reference.

|sourceRoots, sourceRootsRef (xref:#antTasks-iajc-paths[Path])
|Directories containing source files (ending with .java or .aj) to
compile.

|srcdir (xref:#antTasks-iajc-paths[Path]) |Base directory of sources to
compile, assuming there are xref:#antTasks-nested-includes[nested
matches]. This approach uses the Ant process for matching .java files
and is not compatible with incremental mode. Unless using filters to
limit the sources included, use sourceroots instead.

|injars, injarsRef (xref:#antTasks-iajc-paths[Path]) |Deprecated - use
inpath instead. Read .class files for bytecode weaving from zip files
(only).

|inpath, inpathRef (xref:#antTasks-iajc-paths[Path]) |Read .class files
for bytecode weaving from directories or zip files (like classpath).

|classpath, classpathRef (xref:#antTasks-iajc-paths[Path]) |The
classpath used by the sources being compiled. When compiling aspects,
include the same version of the `aspectjrt.jar`.

|bootclasspath, bootclasspathRef (xref:#antTasks-iajc-paths[Path]) |The
bootclasspath specifies types to use instead of the invoking VM's when
seeking types during compilation.

|extDirs, extDirsRef (xref:#antTasks-iajc-paths[Path]) |The extension
directories to use instead of those in the invoking VM when seeking
types during compilation.

|aspectPath, aspectPathRef (xref:#antTasks-iajc-paths[Path]) |Similar to
classpath, aspectpath contains read-only, binary aspect libraries that
are woven into sources but not included in the output. `aspectpath`
accepts jar/zip files (but, unlike classpath, not directories).
|===

*AjcTask (iajc) options for specifying output*

[cols=",",options="header",]
|===
|Attribute |Description
|destDir |The directory in which to place the generated class files.
Only one of `destDir` and `outJar` may be set.

|outJar |The zip file in which to place the generated output class
files. Only one of `destDir` and `outJar` may be set.

|copyInjars |(Deprecated/ignored; ajc does this.) If true, copy all
non-.class files from input jar(s) to the output jar or destination
directory after the compile (or incremental compile) completes. In
forked mode, this copies only after the process completes, not after
incremental compiles.

|sourceRootCopyFilter |When set, copy all files from the sourceroot
directories to the output jar or destination directory except those
specified in the filter pattern. The pattern should be compatible with
an Ant fileset excludes filter; when using this, most developers pass
`**/CVS/*,**/*.java` to exclude any CVS directories or source files. See
`inpathDirCopyFilter`. Requires `destDir` or `outJar`.

|inpathDirCopyFilter |When set, copy all files from the inpath
directories to the output jar or destination directory except those
specified in the filter pattern. The pattern should be compatible with
an Ant fileset excludes filter; when using this, most developers pass
`**/CVS/*,**/*.java,**/*.class` to exclude any CVS directories, source
files, or unwoven .class files. (If `**/*.class` is not specified, it
will be prepended to the filter.) See `sourceRootCopyFilter`. (Note that
ajc itself copies all resources from input jar/zip files on the inpath.)
Requires `destDir` or `outJar`.
|===

*AjcTask (iajc) options for specifying compiler behavior*

[cols=",",options="header",]
|===
|Attribute |Description
|fork |Run process in another VM. This gets the forking classpath either
explicitly from a `forkclasspath` entry or by searching the task or
system/Ant classpath for the first readable file with a name of the form
`aspectj{-}tools{.*}.jar`. When forking you can specify the amount of
memory used with `maxmem`. Fork cannot be used in incremental mode,
unless using a tag file.

|forkclasspath, forkclasspathRef (xref:#antTasks-iajc-paths[Path])
|Specify the classpath to use for the compiler when forking.

|maxmem |The maximum memory to use for the new VM when fork is true.
Values should have the same form as accepted by the VM, e.g., "128m".

|incremental |incremental mode: Build once, then recompile only required
source files when user provides input. Requires that source files be
specified only using `sourceroots`. Incompatible with forking.

|tagfile |incremental mode: Build once, then recompile only required
source files when the tag file is updated, finally exiting when tag file
is deleted. Requires that source files be specified only using
`sourceroots`.

|X |Set experimental option(s), using comma-separated list of accepted
options Options should not contain the leading X. Some commonly-used
experimental options have their own entries. The other permitted ones
(currently) are serializableAspects, incrementalFile, lazyTjp,
reweavable, notReweavable, noInline, terminateAfterCompilation,
ajruntimelevel:1.2, and ajruntimelevel:1.5. Of these, some were
deprecated in AspectJ 5 (reweavable, terminateAfterCompilation, etc.).

|XterminateAfterCompilation |Terminates before the weaving process,
dumping out unfinished class files.
|===

*AjcTask (iajc) options for specifying compiler side-effects and
messages*

[cols=",",options="header",]
|===
|Attribute |Description
|emacssym |If true, emit `.ajesym` symbol files for Emacs support.

|crossref |If true, emit `.ajsym` file into the output directory.

|verbose |If true, log compiler verbose messages as Project.INFO during
the compile.

|logCommand |If true, log compiler command elements as Project.INFO
(rather than the usual Project.VERBOSE level).

|Xlistfileargs |If true, emit list of file arguments during the compile
(but behaves now like verbose).

|version |If true, do not compile - just print AspectJ version.

|help |If true, just print help for the command-line compiler.

|Xlintwarnings |Same as `xlint:warning`: if true, set default level of
all language usage messages to warning.

|Xlint |Specify default level of all language usage messages to one of
[`error warning ignore`].

|XlintFile |Specify property file containing `name:level` associations
setting level for language messages emitted during compilation. Any
levels set override the default associations in
`org/aspectj/weaver/XLintDefault.properties`.

|failonerror |If true, throw BuildException to halt build if there are
any compiler errors. If false, continue notwithstanding compile errors.
Defaults to `true`.

|messageHolderClass |Specify a class to use as the message holder for
the compile process. The entry must be a fully-qualified name of a class
resolveable from the task classpath complying with the
`org.aspectj.bridge.IMessageHolder` interface and having a public
no-argument constructor.

|showWeaveInfo |If true, emit weaver messages. Defaults to `false`.
|===

*AjcTask (iajc) options for specifying Eclipse compiler options*

[cols=",",options="header",]
|===
|Attribute |Description
|nowarn |If true, same as `warn:none`.

|deprecation |If true, same as `warn:deprecation`

|warn |One or more comma-separated warning specifications from
[`constructorName packageDefaultMethod deprecation,
                  maskedCatchBlocks unusedLocals unusedArguments,
                 unusedImports syntheticAccess assertIdentifier`].

|debug |If true, same as `debug:lines,vars,source`

|debugLevel |One or more comma-separated debug specifications from
[`lines vars source`].

|PreserveAllLocals |If true, code gen preserves all local variables (for
debug purposes).

|noimporterror |If true, emit no errors for unresolved imports.

|referenceinfo |If true, compute reference info.

|log |File to log compiler messages to.

|encoding |Default source encoding format (per-file encoding not
supported in Ant tasks).

|proceedOnError |If true, keep compiling after errors encountered,
dumping class files with problem methods.

|progress |If true, emit progress (requires log).

|time |If true, display speed information.

|target |Specify target class file format as one of [`1.1 1.2`].
Defaults to 1.1 class file.

|source |Set source compliance level to one of [`1.3 1.4 1.5`] (default
is 1.4). 1.3 implies -source 1.3 and -target 1.1. 1.4 implies -source
1.4 and -target 1.2. 1.5 implies -source 1.5 and -target 1.5.

|source |Set source assertion mode to one of [`1.3 1.4`]. Default
depends on compliance mode.
|===

[[antTasks-nested-includes]]
=== AjcTask matching parameters specified as nested elements

This task forms an implicit FileSet and supports all attributes of
`fileset` (dir becomes srcdir) as well as the nested `include`,
`exclude`, and `patternset` elements. These can be used to specify
source files. However, it is better to use `sourceroots` to specify
source directories unless using filters to exclude some files from
compilation.

[[antTasks-iajc-paths]]
=== AjcTask Path-like Structures

Some parameters are path-like structures containing one or more
elements; these are `sourceroots`, `argfiles`, `injars`, `inpath`,
`classpath`, `bootclasspath`, `forkclasspath`, and `aspectpath`. In all
cases, these may be specified as nested elements, something like this:

[source, xml]
....
<iajc {attributes..} />
    <{name}>
        <pathelement path="{first-location}"/>
        <pathelement path="{second-location}"/>
        ...
    <{name}>
    ...
</iajc>
....

As with other Path-like structures, they may be defined elsewhere and
specified using the refid attribute:

[source, xml]
....
<path id="aspect.path">
    <pathelement path="${home}/lib/persist.jar"/>
    <pathelement path="${home}/lib/trace.jar"/>
</path>
...
<iajc {attributes..} />
    <aspectpath refid="aspect.path"/>
    ...
</iajc>
....

The task also supports an attribute `\{name}ref` for each such parameter.
E.g., for `aspectpath`:

[source, xml]
....
<iajc {attributes..} aspectpathref="aspect.path"/>
....

[[antTasks-iajc-sample]]
=== Sample of iajc task

A minimal build script defines the task and runs it, specifying the
sources:

[source, xml]
....
<project name="simple-example" default="compile" >
  <taskdef
      resource="org/aspectj/tools/ant/taskdefs/aspectjTaskdefs.properties">
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjtools.jar"/>
    </classpath>
  </taskdef>

  <target name="compile" >
    <iajc sourceroots="${home.dir}/ec/project/src"
        classpath="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
  </target>
</project>
....

Below is script with most everything in it. The compile process...

[arabic]
. Runs in incremental mode, recompiling when the user hits return;
. Reads all the source files from two directories;
. Reads binary .class files from input jar and directory;
. Uses a binary aspect library for persistence;
. Outputs to an application jar; and
. Copies resources from the source directories and binary input jar and
directories to the application jar.

When this target is built, the compiler will build once and then wait
for input from the user. Messages are printed as usual. When the user
has quit, then this runs the application.

[source, xml]
....
<target name="build-test" >
  <iajc outjar="${home.dir}/output/application.jar"
          sourceRootCopyFilter="**/CVS/*,**/*.java"
          inpathDirCopyFilter="**/CVS/*,**/*.java,**/*.class"
          incremental="true" >
    <sourceroots>
      <pathelement location="${home.dir}/ec/project/src"/>
      <pathelement location="${home.dir}/ec/project/testsrc"/>
    </sourceroots>
    <inpath>
      <pathelement location="${home.dir}/build/module.jar"/>
      <pathelement location="${home.dir}/build/binary-input"/>
    </inpath>
    <aspectpath>
      <pathelement location="${home.dir}/ec/int/persist.jar"/>
    </aspectpath>
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
    </classpath>
  </iajc>

  <java classname="org.smart.app.Main">
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
      <pathelement location="${home.dir}/ec/int/persist.jar"/>
      <pathelement location="${home.dir}/output/application.jar"/>
    </classpath>
  </java>
</target>
....

For an example of a build script, see ../examples/build.xml.

[[antTasks-iajc-uptodate]]
=== Avoiding clean compiles

Unlike javac, the ajc compiler always processes all input because new
aspects can apply to updated classes and vice-versa. However, in the
case where no files have been updated, there is no reason to recompile
sources. One way to implement that is with an explicit dependency check
using the uptodate task:

[source, xml]
....
<target name="check.aspects.jar">
  <uptodate property="build.unnecessary"
      targetfile="${aspects.module-jar}" >
     <srcfiles dir="${src1}" includes="**/*.aj"/>
     <srcfiles dir="${src2}/" includes="**/*.aj"/>
  </uptodate>
</target>

<target name="compile.aspects" depends="prepare,check.aspects.jar"
        unless="build.unnecessary">
   <iajc ...
....

When using this technique, be careful to verify that binary input jars
are themselves up-to-date after they would have been modified by any
build commands.

=== Programmatically handling compiler messages

Users may specify a message holder to which the compiler will pass all
messages as they are generated. This will override all of the normal
message printing, but does not prevent the task from failing if
exceptions were thrown or if failonerror is true and the compiler
detected errors in the sources.

Handling messages programmatically could be useful when using the
compiler to verify code. If aspects consist of declare [error|warning],
then the compiler can act to detect invariants in the code being
processed. For code to compare expected and actual messages, see the
AspectJ testing module (which is not included in the binary
distribution).

[[antTasks-adapter]]
== Ajc11CompilerAdapter (javac)

This CompilerAdapter can be used in javac task calls by setting the
`build.compiler` property. This enables users to to easily switch
between the Javac and AspectJ compilers. However, because there are
differences in source file handling between the Javac task and the ajc
compiler, not all Javac task invocations can be turned over to iajc.
However, ajc can compile anything that Javac can, so it should be
possible for any given compile job to restate the Javac task in a way
that can be handled by iajc/ajc.

[[antTasks-adapter-sample]]
=== Sample of compiler adapter

To build using the adapter, put the `aspectjtools.jar` on the system/ant
classpath (e.g., in `$\{ANT_HOME}/lib`) and define the `build.compiler`
property as the fully-qualified name of the class,
`org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter`.

The AspectJ compiler should run for any compile using the Javac task
(for options, see the Ant documentation for the Javac task). For
example, the call below passes all out-of-date source files in the
`src/org/aspectj` subdirectories to the `ajc` command along with the
destination directory:

[source, text]
....
-- command:

    cp aspectj1.1/lib/aspectjtools.jar ant/lib
    ant/bin/ant -Dbuild.compiler=org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter ...

-- task invocation in the build script:

  <javac srcdir="src" includes="org/aspectj/**/*.java" destdir="dest" />
....

To pass ajc-specific arguments, use a compilerarg entry.

[source, text]
....
-- command

  Ant -Dbuild.compiler=org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter

-- build script

  <property name="ajc"
              value="org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter"/>

  <javac srcdir="src" includes="org/aspectj/**/*.java" destdir="dest" >
    <compilerarg compiler="${ajc}" line="-argfile src/args.lst"/>
  <javac/>
....

The Javac task does special handling of source files that can interfere
with ajc. It removes any files that are not out-of-date with respect to
the corresponding .class files. But ajc requires all source files, since
an aspect may affect a source file that is not out of date. (For a
solution to this, see the `build.compiler.clean` property described
below.) Conversely, developers sometimes specify a source directory to
javac, and let it search for files for types it cannot find. AspectJ
will not do this kind of searching under the source directory (since the
programmer needs to control which sources are affected). (Don't confuse
the source directory used by Javac with the source root used by ajc; if
you specify a source root to ajc, it will compile any source file under
that source root (without exception or filtering).) To replace source
dir searching in Javac, use an Ant filter to specify the source files.

[[antTasks-adapter-options]]
=== Compiler adapter compilerarg options

The adapter supports any ajc command-line option passed using
compilerarg, as well as the following options available only in AjcTask.
Find more details on the following options in
xref:#antTasks-iajc[AjcTask (iajc)].

* `-Xmaxmem`: set maximum memory for forking (also settable in javac).
* `-Xlistfileargs`: list file arguments (also settable in javac).
* `-Xfailonerror`: throw BuildException on compiler error (also settable
in javac).
* `-Xmessageholderclass`: specify fully-qualified name of class to use
as the message holder.
* `-Xcopyinjars`: copy resources from any input jars to output (default
behavior since 1.1.1)
* `-Xsourcerootcopyfilter \{filter}`: copy resources from source
directories to output (minus files specified in filter)
* `-Xtagfile \{file}`: use file to control incremental compilation
* `-Xsrcdir \{dir}`: add to list of ajc source roots (all source files
will be included).

Special considerations when using Javac and compilerarg:

* The names above may differ slightly from what you might expect from
AjcTask; use these forms when specifying compilerarg.

* By default the adapter will mimic the Javac task's copying of resource
files by specifying `"**/CVS/*,**/*.java,**/*.aj"` for the sourceroot
copy filter. To change this behavior, supply your own value (e.g.,
`"**/*"` to copy nothing).

* Warning - define the system property `build.compiler.clean` to compile
all files, when available. Javac prunes the source file list of
"up-to-date" source files based on the timestamps of corresponding
.class files, and will not compile if no sources are out of date. This
is wrong for ajc which requires all the files for each compile and which
may refer indirectly to sources using argument files.
+
To work around this, set the global property `build.compiler.clean`.
This tells the compiler adapter to delete all .class files in the
destination directory and re-execute the javac task so javac can
recalculate the list of source files. e.g.,
+
[source, text]
....
Ant -Dbuild.compiler=org.aspectj.tools.ant.taskdefs.Ajc11CompilerAdapter
    -Dbuild.compiler.clean=anything ...
....
+
Caveats to consider when using this global `build.compiler.clean`
property:
[arabic]
. If javac believes there are no out-of-date source files, then the
adapter is never called and cannot clean up, and the "compile" will
appear to complete successfully though it did nothing.
. Cleaning will makes stepwise build processes fail if they depend on
the results of the prior compilation being in the same directory, since
cleaning deletes all .class files.
. This clean process only permits one compile process at a time for each
destination directory because it tracks recursion by writing a tag file
to the destination directory.
. When running incrementally, the clean happens only before the initial
compile.

[[antTasks-ajc]]
== Ajc10 (ajc)

This task handles the same arguments as those used by the AspectJ 1.0
task. This should permit those with existing build scripts using the Ajc
Ant task to continue using the same scripts when compiling with 1.1.
This will list any use of options no longer supported in 1.1 (e.g.,
`lenient, strict, workingdir, preprocess, usejavac`,...), and does not
provide access to the new features of AspectJ 1.1. (Developers using
AspectJ 1.1 only should upgrade their scripts to use AjcTask instead.
This will not work for AspectJ 1.2 or later.)

[[antTasks-ajc-options]]
=== Ajc10 (ajc) Options

Most attributes and nested elements are optional. The compiler requires
that the same version of `aspectjrt.jar` be specified on the classpath,
and that some sources be be specified (using one or more of `argfiles`
and `srcdir` (with patterns)).

Boolean parameters default to `false` unless otherwise stated.

.AjcTask (ajc) options for specifying sources
[cols=",",options="header",]
|===
|Attribute |Description
|srcdir |The base directory of the java files. See

|destdir |The target directory for the output .class files

|includes |Comma-separated list of patterns of files that must be
included. No files are included when omitted.

|includesfile |The path to a file containing include patterns.

|excludes |Comma-separated list of patterns of files that must be
excluded. No files (except default excludes) are excluded when omitted.

|excludesfile |The path to a file containing exclude patterns.

|defaultexcludes |If true, then default excludes are used. Default
excludes are used when omitted (i.e., defaults to `true`).

|classpath, classpathref |The classpath to use, optionally given as a
reference to a classpath Path element defined elsewhere.

|bootclasspath, bootclasspathref |The bootclasspath to use, optionally
given as a reference to a bootclasspath Path element defined elsewhere.

|extdirs |Paths to directories containting installed extensions.

|debug |If true, emit debug info in the .class files.

|deprecation |If true, emit messages about use of deprecated API.

|verbose |Emit compiler status messages during the compile.

|version |Emit version information and quit.

|failonerror |If true, throw BuildException to halt build if there are
any compiler errors. If false, continue notwithstanding compile errors.
Defaults to `true`.

|source |Value of -source option - ignored unless `1.4`.
|===

.Parameters ignored by the old ajc taskdef, but now supported or buggy
[cols=",,",options="header",]
|===
|Attribute |Description |Supported?
|encoding |Default encoding of source files. |yes

|optimize |Whether source should be compiled with optimization. |yes?

|target |Generate class files for specific VM version, one of
[`1.1 1.2`]. |yes

|depend |Enables dependency-tracking. |no

|includeAntRuntime |Whether to include the Ant run-time libraries. |no

|includeJavaRuntime |Whether to include the run-time libraries from the
executing VM. |no

|threads |Multi-threaded compilation |no
|===

The following table shows that many of the unique parameters in AspectJ
1.0 are no longer supported.

.Parameters unique to ajc
[cols=",",options="header",]
|===
|Attribute |Description
|X |deprecated X options include reweavable (on by default)
reweavable:compress (compressed by default)

|emacssym |Generate symbols for Emacs IDE support.

|argfiles |A comma-delimited list of argfiles that contain a
line-delimited list of source file paths (absolute or relative to the
argfile).
|===

==== argfiles - argument list files

An argument file is a file (usually `\{file}.lst`) containing a list of
source file paths (absolute or relative to the argfile). You can use it
to specify all source files to be compiled, which ajc requires to avoid
searching every possible source file in the source path when building
aspects. If you specify an argfile to the ajc task, it will not include
all files in any specified source directory (which is the default
behavior for the Javac task when no includes are specified). Conversely,
if you specify excludes, they will be removed from the list of files
compiled even if they were specified in an argument file.

The compiler also accepts arguments that are not source files, but the
IDE support for such files varies, and Javac does not support them. Be
sure to include exactly one argument on each line.

[[antTasks-ajc-nested]]
=== Ajc10 parameters specified as nested elements

This task forms an implicit FileSet and supports all attributes of
`fileset` (dir becomes srcdir) as well as the nested `include`,
`exclude`, and `patternset` elements. These can be used to specify
source files.

``ajc``'s `srcdir`, `classpath`, `bootclasspath`, `extdirs`, and `jvmarg`
attributes are path-like structures and can also be set via nested
`src`, `classpath`, `bootclasspath`, `extdirs`, and `jvmargs`
elements, respectively.

[[antTasks-ajc-sample]]
=== Sample of ajc task

Following is a declaration for the ajc task and a sample invocation that
uses the ajc compiler to compile the files listed in `default.lst` into
the dest dir:

[source, xml]
....
<project name="example" default="compile" >
  <taskdef name="ajc"
    classname="org.aspectj.tools.ant.taskdefs.Ajc10" >
    <!-- declare classes needed to run the tasks and tools -->
    <classpath>
      <pathelement location="${home.dir}/tools/aspectj/lib/aspectjtools.jar"/>
    </classpath>
  </taskdef>

  <target name="compile" >
    <mkdir dir="dest" />
    <ajc destdir="dest" argfiles="default.lst" >
      <!-- declare classes needed to compile the target files -->
      <classpath>
        <pathelement location="${home.dir}/tools/aspectj/lib/aspectjrt.jar"/>
      </classpath>
    </ajc>
  </target>
</project>
....

This build script snippet

[source, xml]
....
<ajc srcdir="${src}"
     destdir="${build}"
     argfiles="demo.lst"
/>
....

compiles all .java files specified in the demo.lst and stores the .class
files in the $\{build} directory. Unlike the Javac task, the includes
attribute is empty by default, so only those files specified in demo.lst
are included.

This next example

[source, xml]
....
<ajc srcdir="${src}"
     destdir="${build}"
     includes="spacewar/*,coordination/*"
     excludes="spacewar/Debug.java"
/>
....

compiles .java files under the `$\{src}` directory in the spacewar and
coordination packages, and stores the .class files in the `$\{build}`
directory. All source files under spacewar/ and coordination/ are used,
except Debug.java.

See ../examples/build.xml for an example build script.

[[antTasks-problems]]
== Isolating problems running the Ant tasks

If you have problems with the tasks not solved by the documentation,
please try to see if you have the same problems when running ajc
directly on the command line.

* If the problem occurs on the command line also, then the problem is
not in the task. (It may be in the tools; please send bug reports.)
* If the problem does not occur on the command line, then it may lie in
the parameters you are supplying in Ant or in the task's handling of
them.
* If the build script looks correct and the problem only occurs when
building from Ant, then please send a report (including your build file,
if possible).

[[antTasks-knownProblems]]
=== Known issues with the Ant tasks

For the most up-to-date information on known problems, see the
https://bugs.eclipse.org/bugs[bug database] for unresolved
https://bugs.eclipse.org/bugs/buglist.cgi?&product=AspectJ&component=Compiler&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED[compiler
bugs] or
https://bugs.eclipse.org/bugs/buglist.cgi?&product=AspectJ&component=Ant&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED[taskdef
bugs] .

When running Ant build scripts under Eclipse 2.x variants, you will get
a VerifyError because the Eclipse Ant support fails to isolate the Ant
runtime properly. To run in this context, set up iajc to fork (and use
forkclasspath). Eclipse 3.0 will fork Ant processes to avoid problems
like this.

Memory and forking: Users email most often about the ajc task running
out of memory. This is not a problem with the task; some compiles take a
lot of memory, often more than similar compiles using javac.

Forking is now supported in both the
xref:#antTasks-adapter[Ajc11CompilerAdapter (javac)] and
xref:#antTasks-iajc[AjcTask (iajc)], and you can set the maximum memory
available. You can also not fork and increase the memory available to
Ant (see the Ant documentation, searching for ANT_OPTS, the variable
they use in their scripts to pass VM options, e.g., ANT_OPTS=-Xmx128m).

[[antTasks-feedback]]
=== Ant task questions and bugs

For questions, you can send email to aspectj-users@dev.eclipse.org. (Do
join the list to participate!) We also welcome any bug reports, patches,
and features; you can submit them to the bug database at
https://bugs.eclipse.org/bugs using the AspectJ product and Ant
component.