distrib: Highlight C/C++ header files by default

We already highlight C/C++ source files with the default configuration,
so we should do this also for header files.

Signed-off-by: Soeren Grunewald <soeren.grunewald@desy.de>

1 files changed, 1933 insertions, 1933 deletions

diff --git a/src/main/distrib/data/gitblit.properties b/src/main/distrib/data/gitblit.properties
index 483ed6d7..f8d6c6d0 100644
--- a/src/main/distrib/data/gitblit.properties
+++ b/src/main/distrib/data/gitblit.properties
@@ -1,1933 +1,1933 @@
-#

-# Gitblit Settings

-#

-

-# This settings file supports parameterization from the command-line for the

-# following command-line parameters:

-#

-#   --baseFolder    ${baseFolder}    SINCE 1.2.1

-#

-# Settings that support ${baseFolder} parameter substitution are indicated with the

-# BASEFOLDER attribute.  If the --baseFolder argument is unspecified, ${baseFolder}

-# and it's trailing / will be discarded from the setting value leaving a relative

-# path that is equivalent to pre-1.2.1 releases.

-#

-# e.g. "${baseFolder}/git" becomes "git", if --baseFolder is unspecified 

-#

-# Git Servlet Settings

-#

-

-# Base folder for repositories.

-# This folder may contain bare and non-bare repositories but Gitblit will only

-# allow you to push to bare repositories.

-# Use forward slashes even on Windows!!

-# e.g. c:/gitrepos

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-# BASEFOLDER

-git.repositoriesFolder = ${baseFolder}/git

-

-# Build the available repository list at startup and cache this list for reuse.

-# This reduces disk io when presenting the repositories page, responding to rpcs,

-# etc, but it means that  Gitblit will not automatically identify repositories

-# added or deleted by external tools.

-#

-# For this case you can use curl, wget, etc to issue an rpc request to clear the

-# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE)

-#

-# SINCE 1.1.0

-git.cacheRepositoryList = true

-

-# Search the repositories folder subfolders for other repositories.

-# Repositories MAY NOT be nested (i.e. one repository within another)

-# but they may be grouped together in subfolders.

-# e.g. c:/gitrepos/libraries/mylibrary.git

-#      c:/gitrepos/libraries/myotherlibrary.git

-#

-# SINCE 0.5.0

-git.searchRepositoriesSubfolders = true

-

-# Maximum number of folders to recurse into when searching for repositories.

-# The default value, -1, disables depth limits.

-#

-# SINCE 1.1.0

-git.searchRecursionDepth = -1

-

-# List of regex exclusion patterns to match against folders found in

-# *git.repositoriesFolder*.

-# Use forward slashes even on Windows!!

-# e.g. test/jgit\.git

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 1.1.0

-git.searchExclusions =

-

-# List of regex url patterns for extracting a repository name when locating

-# submodules.

-#   e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract

-#   *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git*

-# If no matches are found then the submodule repository name is assumed to be

-# whatever trails the last / character. (e.g. gitblit.git).

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 1.1.0

-git.submoduleUrlPatterns = .*?://github.com/(.*)

-

-# Specify the interface for Git Daemon to bind it's service.

-# You may specify an ip or an empty value to bind to all interfaces.

-# Specifying localhost will result in Gitblit ONLY listening to requests to

-# localhost.

-#

-# SINCE 1.3.0

-# RESTART REQUIRED

-git.daemonBindInterface = 

-

-# port for serving the Git Daemon service.  <= 0 disables this service.

-# On Unix/Linux systems, ports < 1024 require root permissions.

-# Recommended value: 9418

-#

-# SINCE 1.3.0

-# RESTART REQUIRED

-git.daemonPort = 9418

-

-# The port for serving the SSH service.  <= 0 disables this service.

-# On Unix/Linux systems, ports < 1024 require root permissions.

-# Recommended value: 29418

-#

-# SINCE 1.5.0

-# RESTART REQUIRED

-git.sshPort = 29418

-

-# Specify the interface for the SSH daemon to bind its service.

-# You may specify an ip or an empty value to bind to all interfaces.

-# Specifying localhost will result in Gitblit ONLY listening to requests to

-# localhost.

-#

-# SINCE 1.5.0

-# RESTART REQUIRED

-git.sshBindInterface = 

-

-# Specify the SSH key manager to use for retrieving, storing, and removing

-# SSH keys.

-#

-# Valid key managers are:

-#    com.gitblit.transport.ssh.FileKeyManager

-#

-# SINCE 1.5.0

-git.sshKeysManager = com.gitblit.transport.ssh.FileKeyManager

-

-# Directory for storing user SSH keys when using the FileKeyManager.

-#

-# SINCE 1.5.0

-git.sshKeysFolder= ${baseFolder}/ssh

-

-# SSH backend NIO2|MINA.

-#

-# The Apache Mina project recommends using the NIO2 backend.

-#

-# SINCE 1.5.0

-git.sshBackend = NIO2

-

-# Number of threads used to parse a command line submitted by a client over SSH

-# for execution, create the internal data structures used by that command,

-# and schedule it for execution on another thread.

-#

-# SINCE 1.5.0

-git.sshCommandStartThreads = 2

-

-

-# Allow push/pull over http/https with JGit servlet.

-# If you do NOT want to allow Git clients to clone/push to Gitblit set this

-# to false.  You might want to do this if you are only using ssh:// or git://.

-# If you set this false, consider changing the *web.otherUrls* setting to

-# indicate your clone/push urls.

-#

-# SINCE 0.5.0

-git.enableGitServlet = true

-

-# If you want to restrict all git servlet access to those with valid X509 client

-# certificates then set this value to true.

-#

-# SINCE 1.2.0

-git.requiresClientCertificate = false

-

-# Enforce date checks on client certificates to ensure that they are not being

-# used prematurely and that they have not expired.

-#

-# SINCE 1.2.0

-git.enforceCertificateValidity = true

-

-# List of OIDs to extract from a client certificate DN to map a certificate to

-# an account username.

-#

-# e.g. git.certificateUsernameOIDs = CN

-# e.g. git.certificateUsernameOIDs = FirstName LastName

-#

-# SPACE-DELIMITED

-# SINCE 1.2.0

-git.certificateUsernameOIDs = CN

-

-# Only serve/display bare repositories.

-# If there are non-bare repositories in git.repositoriesFolder and this setting

-# is true, they will be excluded from the ui. 

-#

-# SINCE 0.9.0

-git.onlyAccessBareRepositories = false

-

-

-# Specify the list of acceptable transports for pushes.

-# If this setting is empty, all transports are acceptable.

-#

-# Valid choices are: GIT HTTP HTTPS SSH

-#

-# SINCE 1.5.0

-# SPACE-DELIMITED

-git.acceptedPushTransports = HTTP HTTPS SSH

-

-# Allow an authenticated user to create a destination repository on a push if

-# the repository does not already exist.

-#

-# Administrator accounts can create a repository in any project.

-# These repositories are created with the default access restriction and authorization

-# control values.  The pushing account is set as the owner.

-#

-# Non-administrator accounts with the CREATE role may create personal repositories.

-# These repositories are created as VIEW restricted for NAMED users.

-# The pushing account is set as the owner.

-#

-# SINCE 1.2.0

-git.allowCreateOnPush = true

-

-# Global setting to control anonymous pushes.

-#

-# This setting allows/rejects anonymous pushes at the level of the receive pack.

-# This trumps all repository config settings.  While anonymous pushes are convenient

-# on your own box when you are a lone developer,  they are not recommended for

-# any multi-user installation where accountability is required.  Since Gitblit

-# tracks pushes and user accounts, allowing anonymous pushes compromises that

-# information.

-#

-# SINCE 1.4.0

-git.allowAnonymousPushes = false

-

-# The default access restriction for new repositories.

-# Valid values are NONE, PUSH, CLONE, VIEW

-#  NONE = anonymous view, clone, & push

-#  PUSH = anonymous view & clone and authenticated push

-#  CLONE = anonymous view, authenticated clone & push

-#  VIEW = authenticated view, clone, & push

-#

-# SINCE 1.0.0

-git.defaultAccessRestriction = PUSH

-

-# The default authorization control for new repositories.

-# Valid values are AUTHENTICATED and NAMED

-#  AUTHENTICATED = any authenticated user is granted restricted access

-#  NAMED = only named users/teams are granted restricted access

-#

-# SINCE 1.1.0

-git.defaultAuthorizationControl = NAMED

-

-# The prefix for a users personal repository directory.

-#

-# Personal user repositories are created in this directory, named by the user name

-# prefixed with the userRepositoryPrefix. For eaxmple, a user 'john' would have his

-# personal repositories in the directory '~john'.

-#

-# Cannot be an empty string. Also, absolute paths are changed to relative paths by 

-# removing the first directory separator.

-#

-# It is not recommended to change this value AFTER your user's have created

-# personal repositories because it will break all permissions, ownership, and

-# repository push/pull operations. 

-#

-# RESTART REQUIRED

-# SINCE 1.4.0

-git.userRepositoryPrefix = ~

-

-# The default incremental push tag prefix.  Tag prefix applied to a repository

-# that has automatic push tags enabled and does not specify a custom tag prefix.

-#

-# If incremental push tags are enabled, the tips of each branch in the push will

-# be tagged with an increasing revision integer.

-#

-# e.g. refs/tags/r2345 or refs/tags/rev_2345 

-#

-# SINCE 1.3.0

-git.defaultIncrementalPushTagPrefix = r

-

-# Controls creating a repository as --shared on Unix servers.

-#

-# In an Unix environment where mixed access methods exist for shared repositories,

-# the repository should be created with 'git init --shared' to make sure that

-# it can be accessed e.g. via ssh (user git) and http (user www-data).

-#

-# Valid values are the values available for the '--shared' option. The the manual

-# page for 'git init' for more information on shared repositories.

-#

-# SINCE 1.4.0

-git.createRepositoriesShared = false

-

-# Directory for gitignore templates used during repository creation.

-#

-# SINCE 1.6.0

-git.gitignoreFolder = ${baseFolder}/gitignore

-

-# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!)

-#

-# USE AT YOUR OWN RISK!

-#

-# If enabled, the garbage collection executor scans all repositories once a day

-# at the hour of your choosing.  The GC executor will take each repository "offline",

-# one-at-a-time, to check if the repository satisfies it's GC trigger requirements.

-#

-# While the repository is offline it will be inaccessible from the web UI or from

-# any of the other services (git, rpc, rss, etc).

-#

-# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block,

-# especially on Windows systems, so if you are using other tools please coordinate

-# their usage with your GC Executor schedule or do not use this feature.

-#

-# The GC algorithm complex and the JGit team advises caution when using their

-# young implementation of GC.

-#

-# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics

-#

-# EXPERIMENTAL

-# SINCE 1.2.0

-# RESTART REQUIRED

-git.enableGarbageCollection = false

-

-# Hour of the day for the GC Executor to scan repositories.

-# This value is in 24-hour time.

-#

-# SINCE 1.2.0

-git.garbageCollectionHour = 0

-

-# The default minimum total filesize of loose objects to trigger early garbage

-# collection.

-#

-# You may specify a custom threshold for a repository in the repository's settings.

-# Common unit suffixes of k, m, or g are supported.

-#

-# SINCE 1.2.0

-git.defaultGarbageCollectionThreshold = 500k

-

-# The default period, in days, between GCs for a repository.  If the total filesize

-# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's

-# custom threshold, this period will be short-circuited. 

-#

-# e.g. if a repository collects 100KB of loose objects every day with a 500KB

-# threshold and a period of 7 days, it will take 5 days for the loose objects to

-# be collected, packed, and pruned.

-#

-# OR

-#

-# if a repository collects 10KB of loose objects every day with a 500KB threshold

-# and a period of 7 days, it will take the full 7 days for the loose objects to be

-# collected, packed, and pruned.

-#

-# You may specify a custom period for a repository in the repository's settings.

-#

-# The minimum value is 1 day since the GC Executor only runs once a day.

-#

-# SINCE 1.2.0

-git.defaultGarbageCollectionPeriod = 7

-

-# Gitblit can automatically fetch ref updates for a properly configured mirror

-# repository.

-#

-# Requirements:

-# 1. you must manually clone the repository using native git

-#    git clone --mirror git://somewhere.com/myrepo.git

-# 2. the "origin" remote must be the mirror source

-# 3. the "origin" repository must be accessible without authentication OR the

-#    credentials must be embedded in the origin url (not recommended)

-#

-# Notes:

-# 1. "origin" SSH urls are untested and not likely to work

-# 2. mirrors cloned while Gitblit is running are likely to require clearing the

-#    gitblit cache (link on the repositories page of an administrator account)

-# 3. Gitblit will automatically repair any invalid fetch refspecs with a "//"

-#    sequence.

-#

-# SINCE 1.4.0

-# RESTART REQUIRED

-git.enableMirroring = false

-

-# Specify the period between update checks for mirrored repositories.

-# The shortest period you may specify between mirror update checks is 5 mins.

-#

-# SINCE 1.4.0

-# RESTART REQUIRED

-git.mirrorPeriod = 30 mins

-

-# Number of bytes of a pack file to load into memory in a single read operation.

-# This is the "page size" of the JGit buffer cache, used for all pack access

-# operations. All disk IO occurs as single window reads. Setting this too large

-# may cause the process to load more data than is required; setting this too small

-# may increase the frequency of read() system calls.

-#

-# Default on JGit is 8 KiB on all platforms.

-#

-# Common unit suffixes of k, m, or g are supported.

-# Documentation courtesy of the Gerrit project.

-#

-# SINCE 1.0.0

-# RESTART REQUIRED

-git.packedGitWindowSize = 8k

-

-# Maximum number of bytes to load and cache in memory from pack files. If JGit

-# needs to access more than this many bytes it will unload less frequently used

-# windows to reclaim memory space within the process. As this buffer must be shared

-# with the rest of the JVM heap, it should be a fraction of the total memory available.

-#

-# The JGit team recommends setting this value larger than the size of your biggest

-# repository. This ensures you can serve most requests from memory.

-#

-# Default on JGit is 10 MiB on all platforms.

-#

-# Common unit suffixes of k, m, or g are supported.

-# Documentation courtesy of the Gerrit project.

-#

-# SINCE 1.0.0

-# RESTART REQUIRED

-git.packedGitLimit = 10m

-

-# Maximum number of bytes to reserve for caching base objects that multiple deltafied

-# objects reference. By storing the entire decompressed base object in a cache Git

-# is able to avoid unpacking and decompressing frequently used base objects multiple times.

-#

-# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust

-# this value.

-#

-# Common unit suffixes of k, m, or g are supported.

-# Documentation courtesy of the Gerrit project.

-#

-# SINCE 1.0.0

-# RESTART REQUIRED

-git.deltaBaseCacheLimit = 10m

-

-# Maximum number of pack files to have open at once. A pack file must be opened

-# in order for any of its data to be available in a cached window.

-#

-# If you increase this to a larger setting you may need to also adjust the ulimit

-# on file descriptors for the host JVM, as Gitblit needs additional file descriptors

-# available for network sockets and other repository data manipulation.

-#

-# Default on JGit is 128 file descriptors on all platforms.

-# Documentation courtesy of the Gerrit project.

-#

-# SINCE 1.0.0

-# RESTART REQUIRED

-git.packedGitOpenFiles = 128

-

-# Largest object size, in bytes, that JGit will allocate as a contiguous byte

-# array. Any file revision larger than this threshold will have to be streamed,

-# typically requiring the use of temporary files under $GIT_DIR/objects to implement

-# psuedo-random access during delta decompression.

-#

-# Servers with very high traffic should set this to be larger than the size of

-# their common big files. For example a server managing the Android platform

-# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable

-# setting in that environment. Setting this too high may cause the JVM to run out

-# of heap space when handling very big binary files, such as device firmware or

-# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly. 

-#

-# Default is 50 MiB on all platforms.

-#

-# Common unit suffixes of k, m, or g are supported.

-# Documentation courtesy of the Gerrit project.

-#

-#

-# NOTE: The importance of JGit's streamFileTreshold AND Git's bigFileThreshold

-# ISSUE: https://bugs.eclipse.org/bugs/show_bug.cgi?id=394078

-#

-# "core.bigFileThreshold  

-#

-#    Files larger than this size are stored deflated, without

-#    attempting delta compression.  Storing large files without

-#    delta compression avoids excessive memory usage, at the

-#    slight expense of increased disk usage.

-#

-#  Default is 512 MiB on all platforms.

-#  This should be reasonable for most projects as source code and other 

-#  text files can still be delta compressed, 

-#  but larger binary media files won't be."

-#  -- Git documentation

-#

-# If streamFileTreshold < bigFileTreshold you _may_ spend alot of time waiting

-# for push and/or fetch to complete.  It may even look hung.

-#

-# Until the issue is resolved gracefully, a workaround is to configure

-# bigFileThreshold < streamFileTreshold AND then repack the repository.

-#

-# e.g. from the repository folder with Gitblit NOT running:

-#     git config core.bigFileTreshold 40m

-#     git gc --aggressive

-#

-# SINCE 1.0.0

-# RESTART REQUIRED

-git.streamFileThreshold = 50m

-

-# When true, JGit will use mmap() rather than malloc()+read() to load data from

-# pack files.  The use of mmap can be problematic on some JVMs as the garbage

-# collector must deduce that a memory mapped segment is no longer in use before

-# a call to munmap() can be made by the JVM native code.

-#

-# In server applications (such as Gitblit) that need to access many pack files,

-# setting this to true risks artificially running out of virtual address space, 

-# as the garbage collector cannot reclaim unused mapped spaces fast enough.

-#

-# Default on JGit is false. Although potentially slower, it yields much more

-# predictable behavior.

-# Documentation courtesy of the Gerrit project.

-#

-# SINCE 1.0.0

-# RESTART REQUIRED

-git.packedGitMmap = false

-

-# Validate all received (pushed) objects are valid.

-#

-# SINCE 1.5.0

-git.checkReceivedObjects = true

-

-# Validate all referenced but not supplied objects are reachable.

-#

-# If enabled, Gitblit will verify that references to objects not contained

-# within the received pack are already reachable through at least one other

-# reference advertised to clients.

-#

-# This feature is useful when Gitblit doesn't trust the client to not provide a

-# forged SHA-1 reference to an object, in an attempt to access parts of the DAG

-# that they aren't allowed to see and which have been hidden from them via the

-# configured AdvertiseRefsHook or RefFilter.

-#

-# Enabling this feature may imply at least some, if not all, of the same functionality

-# performed by git.checkReceivedObjects. 

-#

-# SINCE 1.5.0

-git.checkReferencedObjectsAreReachable = true

-

-# Set the maximum allowed Git object size.

-#

-# If an object is larger than the given size the pack-parsing will throw an exception

-# aborting the receive-pack operation.  The default value, 0, disables maximum

-# object size checking.

-#

-# SINCE 1.5.0

-git.maxObjectSizeLimit = 0

-

-# Set the maximum allowed pack size.

-#

-# A pack exceeding this size will be rejected. The default value, -1, disables

-# maximum pack size checking.

-#

-# SINCE 1.5.0

-git.maxPackSizeLimit = -1

-

-# Use the Gitblit patch receive pack for processing contributions and tickets.

-# This allows the user to push a patch using the familiar Gerrit syntax:

-#

-#    git push <remote> HEAD:refs/for/<targetBranch>

-#

-# NOTE:

-# This requires git.enableGitServlet = true AND it requires an authenticated

-# git transport connection (http/https) when pushing from a client.

-#

-# Valid services include:

-#    com.gitblit.tickets.FileTicketService

-#    com.gitblit.tickets.BranchTicketService

-#    com.gitblit.tickets.RedisTicketService

-#

-# SINCE 1.4.0

-# RESTART REQUIRED

-tickets.service = 

-

-# Globally enable or disable creation of new bug, enhancement, task, etc tickets

-# for all repositories.

-#

-# If false, no tickets can be created through the ui for any repositories.

-# If true, each repository can control if they allow new tickets to be created.

-#

-# NOTE:

-# If a repository is accepting patchsets, new proposal tickets can be created

-# regardless of this setting.

-#

-# SINCE 1.4.0

-tickets.acceptNewTickets = true

-

-# Globally enable or disable pushing patchsets to all repositories.

-#

-# If false, no patchsets will be accepted for any repositories.

-# If true, each repository can control if they accept new patchsets.

-#

-# NOTE:

-# If a repository is accepting patchsets, new proposal tickets can be created

-# regardless of the acceptNewTickets setting.

-#

-# SINCE 1.4.0

-tickets.acceptNewPatchsets = true

-

-# Default setting to control patchset merge through the web ui.  If true, patchsets

-# must have an approval score to enable the merge button.  This setting can be

-# overriden per-repository.

-#

-# SINCE 1.4.0

-tickets.requireApproval = false

-

-# The case-insensitive regular expression used to identify and close tickets on

-# push to the integration branch for commits that are NOT already referenced as

-# a patchset tip.

-#

-# SINCE 1.5.0

-tickets.closeOnPushCommitMessageRegex = (?:fixes|closes)[\\s-]+#?(\\d+)

-

-# Specify the location of the Lucene Ticket index

-#

-# SINCE 1.4.0

-# RESTART REQUIRED

-tickets.indexFolder = ${baseFolder}/tickets/lucene

-

-# Define the url for the Redis server.

-#

-# e.g. redis://localhost:6379

-#      redis://:foobared@localhost:6379/2

-#

-# SINCE 1.4.0

-# RESTART REQUIRED

-tickets.redis.url =

-

-# The number of tickets to display on a page.

-#

-# SINCE 1.4.0

-tickets.perPage = 25

-

-# The folder where plugins are loaded from.

-#

-# SINCE 1.5.0

-# RESTART REQUIRED

-# BASEFOLDER

-plugins.folder = ${baseFolder}/plugins

-

-# The registry of available plugins.

-#

-# SINCE 1.5.0

-plugins.registry = http://plugins.gitblit.com/plugins.json

-

-# Number of threads used to handle miscellaneous tasks in the background.

-#

-# SINCE 1.6.0

-# RESTART REQUIRED

-execution.defaultThreadPoolSize = 1

-

-#

-# Groovy Integration

-#

-

-# Location of Groovy scripts to use for Pre and Post receive hooks.

-# Use forward slashes even on Windows!!

-# e.g. c:/groovy

-#

-# RESTART REQUIRED

-# SINCE 0.8.0

-# BASEFOLDER

-groovy.scriptsFolder = ${baseFolder}/groovy

-

-# Specify the directory Grape uses for downloading libraries.

-# http://groovy.codehaus.org/Grape

-#

-# RESTART REQUIRED

-# SINCE 1.0.0

-# BASEFOLDER

-groovy.grapeFolder = ${baseFolder}/groovy/grape

-

-# Scripts to execute on Pre-Receive.

-#

-# These scripts execute after an incoming push has been parsed and validated

-# but BEFORE the changes are applied to the repository.  You might reject a

-# push in this script based on the repository and branch the push is attempting

-# to change.

-#

-# Script names are case-sensitive on case-sensitive file systems.  You may omit

-# the traditional ".groovy" from this list if your file extension is ".groovy" 

-#

-# NOTE:

-# These scripts are only executed when pushing to *Gitblit*, not to other Git

-# tooling you may be using.  Also note that these scripts are shared between

-# repositories. These are NOT repository-specific scripts!  Within the script

-# you may customize the control-flow for a specific repository by checking the

-# *repository* variable.

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 0.8.0

-groovy.preReceiveScripts =

-

-# Scripts to execute on Post-Receive.

-#

-# These scripts execute AFTER an incoming push has been applied to a repository.

-# You might trigger a continuous-integration build here or send a notification.

-#

-# Script names are case-sensitive on case-sensitive file systems.  You may omit

-# the traditional ".groovy" from this list if your file extension is ".groovy" 

-#

-# NOTE:

-# These scripts are only executed when pushing to *Gitblit*, not to other Git

-# tooling you may be using.  Also note that these scripts are shared between

-# repositories. These are NOT repository-specific scripts!  Within the script

-# you may customize the control-flow for a specific repository by checking the

-# *repository* variable.

-# 

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 0.8.0

-groovy.postReceiveScripts =

-

-# Repository custom fields for Groovy Hook mechanism

-#

-# List of key=label pairs of custom fields to prompt for in the Edit Repository

-# page.  These keys are stored in the repository's git config file in the 

-# section [gitblit "customFields"].  Key names are alphanumeric only.  These

-# fields are intended to be used for the Groovy hook mechanism where a script

-# can adjust it's execution based on the custom fields stored in the repository

-# config.

-#

-# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another

-#

-# SPACE-DELIMITED

-# SINCE 1.0.0

-groovy.customFields = 

-

-#

-# Fanout Settings

-#

-

-# Fanout is a PubSub notification service that can be used by Sparkleshare

-# to eliminate repository change polling.  The fanout service runs in a separate

-# thread on a separate port from the Gitblit http/https application.

-# This service is provided so that Sparkleshare may be used with Gitblit in

-# firewalled environments or where reliance on Sparkleshare's default notifications

-# server (notifications.sparkleshare.org) is unwanted.

-#

-# This service maintains an open socket connection from the client to the

-# Fanout PubSub service. This service may not work properly behind a proxy server.  

-

-# Specify the interface for Fanout to bind it's service.

-# You may specify an ip or an empty value to bind to all interfaces.

-# Specifying localhost will result in Gitblit ONLY listening to requests to

-# localhost.

-#

-# SINCE 1.2.1

-# RESTART REQUIRED

-fanout.bindInterface = 

-

-# port for serving the Fanout PubSub service.  <= 0 disables this service.

-# On Unix/Linux systems, ports < 1024 require root permissions.

-# Recommended value: 17000

-#

-# SINCE 1.2.1

-# RESTART REQUIRED

-fanout.port = 0

-

-# Use Fanout NIO service.  If false, a multi-threaded socket service will be used.

-# Be advised, the socket implementation spawns a thread per connection plus the

-# connection acceptor thread.  The NIO implementation is completely single-threaded.

-#

-# SINCE 1.2.1

-# RESTART REQUIRED

-fanout.useNio = true

-

-# Concurrent connection limit.  <= 0 disables concurrent connection throttling.

-# If > 0, only the specified number of concurrent connections will be allowed

-# and all other connections will be rejected.

-#

-# SINCE 1.2.1

-# RESTART REQUIRED

-fanout.connectionLimit = 0

-

-#

-# Authentication Settings

-#

-

-# Require authentication to see everything but the admin pages

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-web.authenticateViewPages = false

-

-# If web.authenticateViewPages=true you may optionally require a client-side

-# basic authentication prompt instead of the standard form-based login. 

-#

-# SINCE 1.3.0

-web.enforceHttpBasicAuthentication = false

-

-# Require admin authentication for the admin functions and pages

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-web.authenticateAdminPages = true

-

-# Allow Gitblit to store a cookie in the user's browser for automatic

-# authentication.  The cookie is generated by the user service.

-#

-# SINCE 0.5.0

-web.allowCookieAuthentication = true

-

-# Allow deletion of non-empty repositories. This is enforced for all delete vectors.

-#

-# SINCE 1.6.0

-web.allowDeletingNonEmptyRepositories = true

-

-# Setting to include personal repositories in the main repositories list.

-#

-# SINCE 1.6.0

-web.includePersonalRepositories = false

-

-# Config file for storing project metadata

-#

-# SINCE 1.2.0

-# BASEFOLDER

-web.projectsFile = ${baseFolder}/projects.conf

-

-# Either the full path to a user config file (users.conf)

-# OR a fully qualified class name that implements the IUserService interface.

-#

-# Any custom user service implementation must have a public default constructor.

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-# BASEFOLDER

-realm.userService = ${baseFolder}/users.conf

-

-# Ordered list of external authentication providers which will be used if

-# authentication against the local user service fails.

-#

-# Valid providers are:

-#

-#    htpasswd

-#    ldap

-#    pam

-#    redmine

-#    salesforce

-#    windows

-

-# e.g. realm.authenticationProviders = htpasswd windows

-#

-# SINCE 1.4.0

-# RESTART REQUIRED

-# SPACE-DELIMITED

-realm.authenticationProviders =

-

-# How to store passwords.

-# Valid values are plain, md5, or combined-md5.  md5 is the hash of password.

-# combined-md5 is the hash of username.toLowerCase()+password.

-# Default is md5.

-#

-# SINCE 0.5.0 

-realm.passwordStorage = md5

-

-# Minimum valid length for a plain text password.

-# Default value is 5.  Absolute minimum is 4.

-#

-# SINCE 0.5.0 

-realm.minPasswordLength = 5

-

-#

-# Gitblit Web Settings

-#

-# If blank Gitblit is displayed.

-#

-# SINCE 0.5.0

-web.siteName =

-

-# The canonical url of your Gitblit server to be used in repository url generation,

-# RSS feeds, and all embedded links in email and plugin-based notifications.

-#

-# If you are running Gitblit on a non-standard http port (i.e. not 80 and not 443)

-# then you must specify that port in this url otherwise your generated urls will be

-# incorrect.

-#

-# The hostname of this url will be extracted for SSH and GIT protocol repository

-# url generation.

-#

-# e.g. web.canonicalUrl = https://dev.gitblit.com

-#      web.canonicalUrl = https://dev.gitblit.com:8443

-#

-# SINCE 1.4.0

-web.canonicalUrl = 

-

-# You may specify a different logo image for the header but it must be 120x45px.

-# If the specified file does not exist, the default Gitblit logo will be used.

-#

-# SINCE 1.3.0

-# BASEFOLDER

-web.headerLogo = ${baseFolder}/logo.png

-

-# You may specify a different link URL for the logo image anchor.

-# If blank the Gitblit main page URL is used.

-#

-# SINCE 1.3.0

-# BASEFOLDER

-web.rootLink =

-

-# You may specify a custom header background CSS color.  If unspecified, the

-# default color will be used.

-#

-# e.g. web.headerBackgroundColor = #002060

-#

-# SINCE 1.3.0

-web.headerBackgroundColor =

-

-# You may specify a custom header foreground CSS color.  If unspecified, the

-# default color will be used.

-#

-# e.g. web.headerForegroundColor = white

-#

-# SINCE 1.3.0

-web.headerForegroundColor =

-

-# You may specify a custom header foreground hover CSS color.  If unspecified, the

-# default color will be used.

-#

-# e.g. web.headerHoverColor = white

-#

-# SINCE 1.3.0

-web.headerHoverColor =

-

-# You may specify a custom header border CSS color.  If unspecified, the default

-# color will be used.

-#

-# e.g. web.headerBorderColor = #002060

-#

-# SINCE 1.3.0

-web.headerBorderColor =

-

-# You may specify a custom header border CSS color.  If unspecified, the default

-# color will be used.

-#

-# e.g. web.headerBorderFocusColor = #ff9900

-#

-# SINCE 1.3.0

-web.headerBorderFocusColor =

-

-# If *web.authenticateAdminPages*=true, users with "admin" role can create

-# repositories, create users, and edit repository metadata.

-#

-# If *web.authenticateAdminPages*=false, any user can execute the aforementioned

-# functions. 

-#

-# SINCE 0.5.0 

-web.allowAdministration = true

-

-# Setting to disable rendering the top-level navigation header which includes

-# the login form, top-level links like dashboard, repositories, search, etc.

-# This setting is only useful if you plan to embed Gitblit within another page

-# or system.

-#

-# SINCE 1.4.0

-web.hideHeader = false

-

-# Allows rpc clients to list repositories and possibly manage or administer the 

-# Gitblit server, if the authenticated account has administrator permissions.

-# See *web.enableRpcManagement* and *web.enableRpcAdministration*.

-#

-# SINCE 0.7.0 

-web.enableRpcServlet = true

-

-# Allows rpc clients to manage repositories and users of the Gitblit instance,

-# if the authenticated account has administrator permissions.

-# Requires *web.enableRpcServlet=true*.

-#

-# SINCE 0.7.0 

-web.enableRpcManagement = false

-

-# Allows rpc clients to control the server settings and monitor the health of this

-# this Gitblit instance, if the authenticated account has administrator permissions.

-# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*.

-#

-# SINCE 0.7.0 

-web.enableRpcAdministration = false

-

-# Full path to a configurable robots.txt file.  With this file you can control

-# what parts of your Gitblit server respectable robots are allowed to traverse.

-# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html

-#

-# SINCE 1.0.0

-# BASEFOLDER

-web.robots.txt = ${baseFolder}/robots.txt

-

-# The number of minutes to cache a page in the browser since the last request.

-# The default value is 0 minutes.  A value <= 0 disables all page caching which

-# is the default behavior for Gitblit <= 1.3.0.

-#

-# SINCE 1.3.1

-web.pageCacheExpires = 0

-

-# If true, the web ui layout will respond and adapt to the browser's dimensions.

-# if false, the web ui will use a 940px fixed-width layout.

-# http://twitter.github.com/bootstrap/scaffolding.html#responsive

-#

-# SINCE 1.0.0

-web.useResponsiveLayout = true

-

-# Allow Gravatar images to be displayed in Gitblit pages.

-#

-# SINCE 0.8.0

-web.allowGravatar = true

-

-# Allow dynamic zip downloads.

-#

-# SINCE 0.5.0   

-web.allowZipDownloads = true

-

-# If *web.allowZipDownloads=true* the following formats will be displayed for

-# download compressed archive links:

-#

-# zip   = standard .zip

-# tar   = standard tar format (preserves *nix permissions and symlinks)

-# gz    = gz-compressed tar

-# xz    = xz-compressed tar

-# bzip2 = bzip2-compressed tar

-#

-# SPACE-DELIMITED

-# SINCE 1.2.0

-web.compressedDownloads = zip gz

-

-# Allow optional Lucene integration. Lucene indexing is an opt-in feature.

-# A repository may specify branches to index with Lucene instead of using Git

-# commit traversal. There are scenarios where you may want to completely disable

-# Lucene indexing despite a repository specifying indexed branches.  One such

-# scenario is on a resource-constrained federated Gitblit mirror.

-#

-# SINCE 0.9.0

-web.allowLuceneIndexing = true

-

-# Allows an authenticated user to create forks of a repository

-#

-# set this to false if you want to disable all fork controls on the web site

-#

-web.allowForking = true

-

-# Controls the length of shortened commit hash ids

-#

-# SINCE 1.2.0

-web.shortCommitIdLength = 6

-

-# Use Clippy (Flash solution) to provide a copy-to-clipboard button.

-# If false, a button with a more primitive JavaScript-based prompt box will

-# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative.

-#

-# SINCE 0.8.0

-web.allowFlashCopyToClipboard = true

-

-# Default maximum number of commits that a repository may contribute to the

-# activity page, regardless of the selected duration.  This setting may be valuable

-# for an extremely busy server.  This value may also be configed per-repository

-# in Edit Repository. 0 disables this throttle.

-#

-# SINCE 1.2.0

-web.maxActivityCommits = 0

-

-# Default number of entries to include in RSS Syndication links

-#

-# SINCE 0.5.0

-web.syndicationEntries = 25

-

-# Show the size of each repository on the repositories page.

-# This requires recursive traversal of each repository folder.  This may be

-# non-performant on some operating systems and/or filesystems. 

-#

-# SINCE 0.5.2

-web.showRepositorySizes = true

-

-# List of custom regex expressions that can be displayed in the Filters menu

-# of the Repositories and Activity pages.  Keep them very simple because you

-# are likely to run into encoding issues if they are too complex.

-#

-# Use !!! to separate the filters 

-#

-# SINCE 0.8.0

-web.customFilters =

-

-# Show federation registrations (without token) and the current pull status

-# to non-administrator users. 

-#

-# SINCE 0.6.0

-web.showFederationRegistrations = false

-

-# This is the message displayed when *web.authenticateViewPages=true*.

-# This can point to a file with Markdown content.

-# Specifying "gitblit" uses the internal login message.

-#

-# SINCE 0.7.0

-# BASEFOLDER

-web.loginMessage = gitblit

-

-# This is the message displayed above the repositories table.

-# This can point to a file with Markdown content.

-# Specifying "gitblit" uses the internal welcome message.

-#

-# SINCE 0.5.0

-# BASEFOLDER

-web.repositoriesMessage = gitblit

-

-# Ordered list of charsets/encodings to use when trying to display a blob.

-# If empty, UTF-8 and ISO-8859-1 are used.  The server's default charset

-# is always appended to the encoding list.  If all encodings fail to cleanly

-# decode the blob content, UTF-8 will be used with the standard malformed

-# input/unmappable character replacement strings.

-# 

-# SPACE-DELIMITED

-# SINCE 1.0.0

-web.blobEncodings = UTF-8 ISO-8859-1

-

-# Manually set the default timezone to be used by Gitblit for display in the 

-# web ui.  This value is independent of the JVM timezone.  Specifying a blank

-# value will default to the JVM timezone.

-# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin

-#

-# SINCE 0.9.0

-# RESTART REQUIRED

-web.timezone =

-

-# Use the client timezone when formatting dates.

-# This uses AJAX to determine the browser's timezone and may require more

-# server overhead because a Wicket session is created.  All Gitblit pages

-# attempt to be stateless, if possible.

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-web.useClientTimezone = false

-

-# Time format

-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>

-#

-# SINCE 0.8.0

-web.timeFormat = HH:mm

-

-# Short date format

-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>

-#

-# SINCE 0.5.0

-web.datestampShortFormat = yyyy-MM-dd

-

-# Long date format

-#

-# SINCE 0.8.0

-web.datestampLongFormat = EEEE, MMMM d, yyyy

-

-# Long timestamp format

-# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>

-#

-# SINCE 0.5.0

-web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z

-

-# Mount URL parameters

-# This setting controls if pretty or parameter URLs are used.

-# i.e.

-# if true:

-#     http://localhost/commit/myrepo/abcdef

-# if false:

-#     http://localhost/commit/?r=myrepo&h=abcdef

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-web.mountParameters = true

-

-# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding

-# in URLs as a security precaution for proxies.  This setting tells Gitblit

-# to preemptively replace '/' with '*' or '!' for url string parameters.

-#

-# <https://issues.apache.org/jira/browse/WICKET-1303>

-# <http://tomcat.apache.org/security-6.html#Fixed_in_Apache_Tomcat_6.0.10>

-# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your

-# *CATALINA_OPTS* or to your JVM launch parameters

-#

-# SINCE 0.5.2

-web.forwardSlashCharacter = /

-

-# Show other URLs on the summary page for accessing your git repositories

-# Use spaces to separate urls.

-#

-# {0} is the token for the repository name

-# {1} is the token for the username

-#

-# The username is only practical if you have setup your other git serving

-# solutions accounts to have the same username as the Gitblit account.

-#

-# e.g.

-# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0} https://{1}@localhost/r/{0}

-#

-# SPACE-DELIMITED

-# SINCE 0.5.0

-web.otherUrls = 

-

-# Should app-specific clone links be displayed for SourceTree, SparkleShare, etc?

-#

-# SINCE 1.3.0

-web.allowAppCloneLinks = true

-

-# Choose how to present the repositories list.

-#   grouped = group nested/subfolder repositories together (no sorting)

-#   flat = flat list of repositories (sorting allowed)

-#

-# SINCE 0.5.0

-web.repositoryListType = grouped

-

-# If using a grouped repository list and there are repositories at the

-# root level of your repositories folder, you may specify the displayed

-# group name with this setting.  This value is only used for web presentation.

-#

-# SINCE 0.5.0

-web.repositoryRootGroupName = main

-

-# Display the repository swatch color next to the repository name link in the 

-# repositories list. 

-#

-# SINCE 0.8.0

-web.repositoryListSwatches = true

-

-# Defines the default commit message renderer.  This can be configured

-# per-repository.

-#

-# Valid values are: plain, markdown

-#

-# SINCE 1.4.0

-web.commitMessageRenderer = plain

-

-# Control if email addresses are shown in web ui

-#

-# SINCE 0.5.0

-web.showEmailAddresses = true

-

-# Shows a combobox in the page links header with commit, committer, and author

-# search selection.  Default search is commit.

-#

-# SINCE 0.5.0

-web.showSearchTypeSelection = false

-

-# Controls display of activity graphs on the dashboard, activity, and summary

-# pages.  Charting makes use of the external Google Charts API.

-#

-# SINCE 0.5.0 

-web.generateActivityGraph = true

-

-# Displays the commits branch graph in the summary page and commits/log page.

-#

-# SINCE 1.4.0

-web.showBranchGraph = true

-

-# The default number of days to show on the activity page.

-# Value must exceed 0 else default of 7 is used

-#

-# SINCE 0.8.0

-web.activityDuration = 7

-

-# Choices for days of activity to display.

-#

-# SPACE-DELIMITED

-# SINCE 1.3.0

-web.activityDurationChoices = 1 3 7 14 21 28

-

-# Maximum number of days of activity that may be displayed on the activity page.

-#

-# SINCE 1.3.2

-web.activityDurationMaximum = 30

-

-# The number of days of commits to cache in memory for the dashboard, activity,

-# and project pages.  A value of 0 will disable all caching and will parse commits

-# in each repository per-request.  If the value > 0 these pages will try to fulfill

-# requests using the commit cache.  If the request specifies a period which falls

-# outside the commit cache window, then the cache will be ignored and the request

-# will be fulfilled by brute-force parsing all relevant commits per-repository.

-#

-# Consider the values specified for *web.activityDurationChoices* when setting

-# the cache size AND consider adjusting the JVM -Xmx heap parameter appropriately.

-#

-# SINCE 1.3.0

-# RESTART REQUIRED

-web.activityCacheDays = 14

-

-# Case-insensitive list of authors to exclude from metrics.  Useful for

-# eliminating bots.

-#

-# SPACE-DELIMITED

-# SINCE 1.3.0

-web.metricAuthorExclusions =

-

-# The number of commits to display on the summary page

-# Value must exceed 0 else default of 20 is used

-#

-# SINCE 0.5.0

-web.summaryCommitCount = 16

-

-# The number of tags/branches to display on the summary page.

-# -1 = all tags/branches

-# 0 = hide tags/branches

-# N = N tags/branches

-#

-# SINCE 0.5.0

-web.summaryRefsCount = 5

-

-# Show a README file, if available, on the summary page.

-#

-# SINCE 1.4.0

-web.summaryShowReadme = false

-

-# The number of items to show on a page before showing the first, prev, next

-# pagination links.  A default of 50 is used for any invalid value.

-#

-# SINCE 0.5.0

-web.itemsPerPage = 50

-

-# The number of reflog changes to display on the overview page

-# Value must exceed 0 else default of 5 is used

-#

-# SINCE 1.3.0

-web.overviewReflogCount = 5

-

-# The number of reflog changes to show on a reflog page before show the first,

-#  prev, next pagination links.  A default of 10 is used for any invalid value.

-#

-# SINCE 1.3.0

-web.reflogChangesPerPage = 10

-

-# Specify the names of documents in the root of your repository to be displayed

-# in tabs on your repository docs page.  If the name is not found in the root

-# then no tab is added.  The order specified is the order displayed.  Do not

-# specify a file extension as the aggregation of markup extensions + txt are used

-# in the search algorithm.

-#

-# SPACE-DELIMITED

-# SINCE 1.4.0

-web.documents = readme home index changelog contributing submitting_patches copying license notice authors

-

-# Registered file extensions to ignore during Lucene indexing

-#

-# SPACE-DELIMITED

-# SINCE 0.9.0

-web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt pptx png so swf tar xcf xls xlsx zip

-

-# Registered extensions for google-code-prettify

-#

-# SPACE-DELIMITED

-# SINCE 0.5.0

-web.prettyPrintExtensions = aea agc basic c cbm cl clj cpp cs css dart el erl erlang frm fs go groovy hs htm html java js latex lisp ll llvm lsp lua ml moxie mumps n nemerle pascal php pl pm prefs properties proto py r R rb rd Rd rkt s S scala scm sh Splus sql ss tcl tex vb vbs vhd vhdl wiki xml xq xquery yaml yml ymlapollo

-

-# Registered extensions for markdown transformation

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 0.5.0

-web.markdownExtensions = md mkd markdown MD MKD

-

-# Registered extensions for mediawiki transformation

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 1.4.0

-web.mediawikiExtensions = mw mediawiki

-

-# Registered extensions for twiki transformation

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 1.4.0

-web.twikiExtensions = twiki

-

-# Registered extensions for textile transformation

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 1.4.0

-web.textileExtensions = textile

-

-# Registered extensions for confluence transformation

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 1.4.0

-web.confluenceExtensions = confluence

-

-# Registered extensions for tracwiki transformation

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 1.4.0

-web.tracwikiExtensions = tracwiki

-

-# Image extensions

-#

-# SPACE-DELIMITED

-# SINCE 0.5.0

-web.imageExtensions = bmp jpg gif png 

-

-# Registered extensions for binary blobs

-#

-# SPACE-DELIMITED

-# SINCE 0.5.0

-web.binaryExtensions = 7z arc arj bin dll doc docx exe gz jar lib lzh odg odf odt pdf ppt pptx so tar xls xlsx zip

-

-# Aggressive heap management will run the garbage collector on every generated

-# page.  This slows down page generation a little but improves heap consumption. 

-#

-# SINCE 0.5.0

-web.aggressiveHeapManagement = false

-

-# Run the webapp in debug mode

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-web.debugMode = false

-

-# Force a default locale for all users, ignoring the browser's settings.

-# An empty value allows Gitblit to use the translation preferred by the browser.

-#

-# Changing this value while the server is running will only affect new sessions.

-#

-# e.g. web.forceDefaultLocale = en

-#

-# SINCE 1.3.0

-web.forceDefaultLocale = 

-

-# Enable/disable global regex substitutions (i.e. shared across repositories)

-#

-# SINCE 0.5.0

-# DEPRECATED 1.4.0 (migrate to bugtraq instead)

-regex.global = true

-

-# Example global regex substitutions

-# Use !!! to separate the search pattern and the replace pattern

-# searchpattern!!!replacepattern

-# SINCE 0.5.0

-

-# regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://somehost/bug/$3">$3</a>

-# SINCE 0.5.0

-

-# Example Gerrit links

-# regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!Change-Id: <a href="http://somehost/r/#q,$2,n,z">$2</a>

-# regex.global.reviewedon = \\b(Reviewed-on:\\s*)([A-Za-z0-9:/\\.]*)\\b!!!Reviewed-on: <a href="$2">$2</a>

-

-# Example per-repository regex substitutions overrides global

-# SINCE 0.5.0

-# regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://elsewhere/bug/$3">$3</a>

-

-#

-# Mail Settings

-# SINCE 0.6.0

-#

-# Mail settings are used to notify administrators of received federation proposals

-#

-

-# ip or hostname of smtp server

-#

-# SINCE 0.6.0

-mail.server =

-

-# port to use for smtp requests

-#

-# SINCE 0.6.0

-mail.port = 25

-

-# debug the mail executor

-#

-# SINCE 0.6.0

-mail.debug = false

-

-# use SMTPs flag

-mail.smtps = false

-

-# use STARTTLS flag

-#

-# SINCE 1.6.0

-mail.starttls = false

-

-# if your smtp server requires authentication, supply the credentials here

-#

-# SINCE 0.6.0

-mail.username =

-# SINCE 0.6.0

-mail.password =

-

-# from address for generated emails

-#

-# SINCE 0.6.0

-mail.fromAddress = 

-

-# List of email addresses for the Gitblit administrators

-#

-# SPACE-DELIMITED

-# SINCE 0.6.0

-mail.adminAddresses = 

-

-# List of email addresses for sending push email notifications.

-#

-# This key currently requires use of the sendemail.groovy hook script.

-# If you set sendemail.groovy in *groovy.postReceiveScripts* then email

-# notifications for all repositories (regardless of access restrictions!)

-# will be sent to these addresses.

-#

-# SPACE-DELIMITED

-# SINCE 0.8.0

-mail.mailingLists =

-

-#

-# Federation Settings

-# SINCE 0.6.0

-#

-# A Gitblit federation is a way to backup one Gitblit instance to another.

-#

-# *git.enableGitServlet* must be true to use this feature.

-

-# Your federation name is used for federation status acknowledgments.  If it is

-# unset, and you elect to send a status acknowledgment, your Gitblit instance

-# will be identified by its hostname, if available, else your internal ip address.

-# The source Gitblit instance will also append your external IP address to your

-# identification to differentiate multiple pulling systems behind a single proxy.

-#

-# SINCE 0.6.0

-federation.name =

-

-# Specify the passphrase of this Gitblit instance.

-#

-# An unspecified (empty) passphrase disables processing federation requests.

-#

-# This value can be anything you want: an integer, a sentence, an haiku, etc.

-# Keep the value simple, though, to avoid Java properties file encoding issues.

-#

-# Changing your passphrase will break any registrations you have established with other

-# Gitblit instances.

-#

-# CASE-SENSITIVE

-# SINCE 0.6.0

-# RESTART REQUIRED *(only to enable or disable federation)*

-federation.passphrase =

-

-# Control whether or not this Gitblit instance can receive federation proposals

-# from another Gitblit instance.  Registering a federated Gitblit is a manual

-# process.  Proposals help to simplify that process by allowing a remote Gitblit

-# instance to send your Gitblit instance the federation pull data.

-#

-# SINCE 0.6.0

-federation.allowProposals = false

-

-# The destination folder for cached federation proposals.

-# Use forward slashes even on Windows!!

-#

-# SINCE 0.6.0

-# BASEFOLDER

-federation.proposalsFolder = ${baseFolder}/proposals

-

-# The default pull frequency if frequency is unspecified on a registration

-#

-# SINCE 0.6.0

-federation.defaultFrequency = 60 mins

-

-# Federation Sets are named groups of repositories.  The Federation Sets are 

-# available for selection in the repository settings page.  You can assign a

-# repository to one or more sets and then distribute the token for the set.

-# This allows you to grant federation pull access to a subset of your available

-# repositories.  Tokens for federation sets only grant repository pull access.

-#

-# SPACE-DELIMITED

-# CASE-SENSITIVE

-# SINCE 0.6.0

-federation.sets = 

-

-# Federation pull registrations

-# Registrations are read once, at startup.

-#

-# RESTART REQUIRED

-#

-# frequency:

-#   The shortest frequency allowed is every 5 minutes

-#   Decimal frequency values are cast to integers

-#   Frequency values may be specified in mins, hours, or days

-#   Values that can not be parsed or are unspecified default to *federation.defaultFrequency*

-#

-# folder:

-#   if unspecified, the folder is *git.repositoriesFolder*

-#   if specified, the folder is relative to *git.repositoriesFolder*

-#

-# bare:

-#   if true, each repository will be created as a *bare* repository and will not

-#   have a working directory.

-#

-#   if false, each repository will be created as a normal repository suitable

-#   for local work.

-#

-# mirror:

-#   if true, each repository HEAD is reset to *origin/master* after each pull.

-#   The repository will be flagged *isFrozen* after the initial clone.

-#

-#   if false, each repository HEAD will point to the FETCH_HEAD of the initial

-#   clone from the origin until pushed to or otherwise manipulated.

-#

-# mergeAccounts:

-#   if true, remote accounts and their permissions are merged into your 

-#   users.properties file 

-#

-# notifyOnError:

-#   if true and the mail configuration is properly set, administrators will be

-#   notified by email of pull failures

-#

-# include and exclude:

-#   Space-delimited list of repositories to include or exclude from pull

-#   may be * wildcard to include or exclude all

-#   may use fuzzy match (e.g. org.eclipse.*)

-

-#

-# (Nearly) Perfect Mirror example

-#

-

-#federation.example1.url = https://go.gitblit.com

-#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4

-#federation.example1.frequency = 120 mins

-#federation.example1.folder =

-#federation.example1.bare = true 

-#federation.example1.mirror = true 

-#federation.example1.mergeAccounts = true

-

-#

-# Advanced Realm Settings

-#

-

-# Auto-creates user accounts based on the servlet container principal.  This

-# assumes that your Gitblit install is a protected resource and your container's

-# authentication process intercepts all Gitblit requests.

-#

-# SINCE 1.3.0

-realm.container.autoCreateAccounts = false

-

-# Allow or prohibit Windows guest account logins

-#

-# SINCE 1.3.0

-realm.windows.allowGuests = false

-

-# Allow user accounts belonging to the BUILTIN\Administrators group to be

-# Gitblit administrators.

-#

-# SINCE 1.4.0

-realm.windows.permitBuiltInAdministrators = true

-

-# The default domain for authentication.

-#

-# If specified, this domain will be used for authentication UNLESS the supplied

-# login name manually specifies a domain (.e.g. mydomain\james or james@mydomain)

-#

-# If unspecified, the username must be specified in UPN format (name@domain).

-#

-# if "." (dot) is specified, ONLY the local account database will be used.

-#

-# SINCE 1.3.0

-realm.windows.defaultDomain =

-

-# The PAM service name for authentication.

-# default: system-auth

-#

-# SINCE 1.3.1

-realm.pam.serviceName = system-auth

-

-# The Apache htpasswd file that contains the users and passwords.

-# default: ${baseFolder}/htpasswd

-#

-# RESTART REQUIRED

-# BASEFOLDER

-# SINCE 1.3.2

-realm.htpasswd.userfile = ${baseFolder}/htpasswd

-

-# Restrict the Salesforce user to members of this org.

-# default: 0 (i.e. do not check the Org ID)

-#

-# SINCE 1.3.0

-realm.salesforce.orgId = 0

-

-# URL of the LDAP server.

-# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to

-# send StartTLS command.

-#

-# SINCE 1.0.0

-realm.ldap.server = ldap://localhost

-

-# Login username for LDAP searches.

-# If this value is unspecified, anonymous LDAP login will be used.

-# 

-# e.g. mydomain\\username

-#

-# SINCE 1.0.0

-realm.ldap.username = cn=Directory Manager

-

-# Login password for LDAP searches.

-#

-# SINCE 1.0.0

-realm.ldap.password = password

-

-# Bind pattern for Authentication.

-# Allow to directly authenticate an user without LDAP Searches.

-# 

-# e.g. CN=${username},OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain

-#

-# SINCE 1.5.0

-realm.ldap.bindpattern = 

-

-

-# Delegate team membership control to LDAP.

-#

-# If true, team user memberships will be specified by LDAP groups.  This will

-# disable team selection in Edit User and user selection in Edit Team.

-#

-# If false, LDAP will only be used for authentication and Gitblit will maintain

-# team memberships with the *realm.ldap.backingUserService*.

-#

-# SINCE 1.0.0

-realm.ldap.maintainTeams = false

-

-# Root node for all LDAP users

-#

-# This is the root node from which subtree user searches will begin.

-# If blank, Gitblit will search ALL nodes.

-#

-# SINCE 1.0.0

-realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain

-

-# Filter criteria for LDAP users

-#

-# Query pattern to use when searching for a user account. This may be any valid 

-# LDAP query expression, including the standard (&) and (|) operators.

-#

-# Variables may be injected via the ${variableName} syntax.

-# Recognized variables are:

-#    ${username} - The text entered as the user name

-#

-# SINCE 1.0.0

-realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username}))

-

-# Root node for all LDAP groups to be used as Gitblit Teams

-#

-# This is the root node from which subtree team searches will begin.

-# If blank, Gitblit will search ALL nodes.  

-#

-# SINCE 1.0.0

-realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain

-

-# Filter criteria for LDAP groups

-#

-# Query pattern to use when searching for a team. This may be any valid 

-# LDAP query expression, including the standard (&) and (|) operators.

-#

-# Variables may be injected via the ${variableName} syntax.

-# Recognized variables are:

-#    ${username} - The text entered as the user name

-#    ${dn} - The Distinguished Name of the user logged in

-#

-# All attributes from the LDAP User record are available. For example, if a user

-# has an attribute "fullName" set to "John", "(fn=${fullName})" will be 

-# translated to "(fn=John)".

-#

-# SINCE 1.0.0

-realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn}))

-

-# Filter criteria for empty LDAP groups

-#

-# Query pattern to use when searching for an empty team. This may be any valid 

-# LDAP query expression, including the standard (&) and (|) operators.

-#

-# default: (&(objectClass=group)(!(member=*)))

-# SINCE 1.4.0

-realm.ldap.groupEmptyMemberPattern = (&(objectClass=group)(!(member=*)))

-

-# LDAP users or groups that should be given administrator privileges.

-#

-# Teams are specified with a leading '@' character.  Groups with spaces in the

-# name can be entered as "@team name".  This setting only applies when using

-# LDAP to maintain team memberships.

-#

-# e.g. realm.ldap.admins = john @git_admins "@git admins"

-#

-# SPACE-DELIMITED

-# SINCE 1.0.0

-realm.ldap.admins = @Git_Admins

-

-# Attribute(s) on the USER record that indicate their display (or full) name.

-# Leave blank for no mapping available in LDAP.

-#

-# This may be a single attribute, or a string of multiple attributes.  Examples:

-#  displayName - Uses the attribute 'displayName' on the user record

-#  ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3 

-#       attributes together, with a '.' after personalTitle

-#

-# SINCE 1.0.0

-realm.ldap.displayName = displayName

-

-# Attribute(s) on the USER record that indicate their email address.

-# Leave blank for no mapping available in LDAP.

-#

-# This may be a single attribute, or a string of multiple attributes.  Examples:

-#  email - Uses the attribute 'email' on the user record

-#  ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes

-#       together with a '.' and '@' creating something like first.last@gitblit.com 

-#

-# SINCE 1.0.0

-realm.ldap.email = email

-

-# Attribute on the USER record that indicate their username to be used in gitblit

-# when synchronizing users from LDAP

-# if blank, Gitblit will use uid

-# For MS Active Directory this may be sAMAccountName

-#

-# SINCE 1.0.0

-realm.ldap.uid = uid

-

-# Defines whether to synchronize all LDAP users and teams into the user service

-#

-# Valid values: true, false

-# If left blank, false is assumed

-#

-# SINCE 1.4.0

-realm.ldap.synchronize = false

-

-# Defines the period to be used when synchronizing users and teams from ldap.

-#

-# Must be of the form '<long> <TimeUnit>' where <TimeUnit> is one of 'MILLISECONDS', 'SECONDS', 'MINUTES', 'HOURS', 'DAYS' 

-

-# default: 5 MINUTES

-#

-# RESTART REQUIRED

-# SINCE 1.4.0

-realm.ldap.syncPeriod = 5 MINUTES

-

-# Defines whether to delete non-existent LDAP users from the user service

-# during synchronization. depends on  realm.ldap.synchronize = true

-#

-# Valid values: true, false

-# If left blank, true is assumed

-#

-# SINCE 1.4.0

-realm.ldap.removeDeletedUsers = true

-

-# URL of the Redmine.

-#

-# SINCE 1.2.0

-realm.redmine.url = http://example.com/redmine

-

-#

-# Gitblit GO Server Settings

-# The following settings only affect the integrated GO variant.

-#

-

-# The temporary folder to decompress the embedded gitblit webapp. 

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-# BASEFOLDER

-server.tempFolder = ${baseFolder}/temp

-

-# Specify the maximum number of concurrent http/https Jetty worker

-# threads to allow.  This setting does not affect other threaded

-# daemons and components of Gitblit.

-#

-# SINCE 1.3.0

-# RESTART REQUIRED

-server.threadPoolSize = 50

-

-# Context path for the GO application.  You might want to change the context

-# path if running Gitblit behind a proxy layer such as mod_proxy.

-#

-# SINCE 0.7.0

-# RESTART REQUIRED

-server.contextPath = /

-

-# Standard http port to serve.  <= 0 disables this connector.

-# On Unix/Linux systems, ports < 1024 require root permissions.

-# Recommended value: 80 or 8080

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-server.httpPort = 0

-

-# Secure/SSL https port to serve. <= 0 disables this connector.

-# On Unix/Linux systems, ports < 1024 require root permissions.

-# Recommended value: 443 or 8443

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-server.httpsPort = 8443

-

-# Automatically redirect http requests to the secure https connector.

-#

-# This setting requires that you have configured server.httpPort and server.httpsPort.

-# Unless you are on a private LAN where you trust all client connections, it is

-# recommended to use https for all communications.

-#

-# SINCE 1.4.0

-# RESTART REQUIRED

-server.redirectToHttpsPort = false

-

-# Specify the interface for Jetty to bind the standard connector.

-# You may specify an ip or an empty value to bind to all interfaces.

-# Specifying localhost will result in Gitblit ONLY listening to requests to

-# localhost.

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-server.httpBindInterface =

-

-# Specify the interface for Jetty to bind the secure connector.

-# You may specify an ip or an empty value to bind to all interfaces.

-# Specifying localhost will result in Gitblit ONLY listening to requests to

-# localhost.

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-server.httpsBindInterface =

-

-# Alias of certificate to use for https/SSL serving.  If blank the first

-# certificate found in the keystore will be used. 

-#

-# SINCE 1.2.0

-# RESTART REQUIRED

-server.certificateAlias = localhost

-

-# Password for SSL keystore.

-# Keystore password and certificate password must match.

-# This is provided for convenience, its probably more secure to set this value

-# using the --storePassword command line parameter.

-#

-# If you are using the official JRE or JDK from Oracle you may not have the

-# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM.  Because

-# of this, your store/key password can not exceed 7 characters.  If you require

-# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction

-# Policy files from Oracle.

-#

-# http://www.oracle.com/technetwork/java/javase/downloads/index.html

-#

-# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited

-# Strength encryption is available.

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-server.storePassword = gitblit

-

-# If serving over https (recommended) you might consider requiring clients to

-# authenticate with ssl certificates.  If enabled, only https clients with the

-# a valid client certificate will be able to access Gitblit.

-#

-# If disabled, client certificate authentication is optional and will be tried

-# first before falling-back to form authentication or basic authentication.

-#

-# Requiring client certificates to access any of Gitblit may be too extreme,

-# consider this carefully.

-#

-# SINCE 1.2.0

-# RESTART REQUIRED

-server.requireClientCertificates = false

-

-# Port for shutdown monitor to listen on.

-#

-# SINCE 0.5.0

-# RESTART REQUIRED

-server.shutdownPort = 8081

+#
+# Gitblit Settings
+#
+
+# This settings file supports parameterization from the command-line for the
+# following command-line parameters:
+#
+#   --baseFolder    ${baseFolder}    SINCE 1.2.1
+#
+# Settings that support ${baseFolder} parameter substitution are indicated with the
+# BASEFOLDER attribute.  If the --baseFolder argument is unspecified, ${baseFolder}
+# and it's trailing / will be discarded from the setting value leaving a relative
+# path that is equivalent to pre-1.2.1 releases.
+#
+# e.g. "${baseFolder}/git" becomes "git", if --baseFolder is unspecified 
+#
+# Git Servlet Settings
+#
+
+# Base folder for repositories.
+# This folder may contain bare and non-bare repositories but Gitblit will only
+# allow you to push to bare repositories.
+# Use forward slashes even on Windows!!
+# e.g. c:/gitrepos
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+git.repositoriesFolder = ${baseFolder}/git
+
+# Build the available repository list at startup and cache this list for reuse.
+# This reduces disk io when presenting the repositories page, responding to rpcs,
+# etc, but it means that  Gitblit will not automatically identify repositories
+# added or deleted by external tools.
+#
+# For this case you can use curl, wget, etc to issue an rpc request to clear the
+# cache (e.g. https://localhost/rpc?req=CLEAR_REPOSITORY_CACHE)
+#
+# SINCE 1.1.0
+git.cacheRepositoryList = true
+
+# Search the repositories folder subfolders for other repositories.
+# Repositories MAY NOT be nested (i.e. one repository within another)
+# but they may be grouped together in subfolders.
+# e.g. c:/gitrepos/libraries/mylibrary.git
+#      c:/gitrepos/libraries/myotherlibrary.git
+#
+# SINCE 0.5.0
+git.searchRepositoriesSubfolders = true
+
+# Maximum number of folders to recurse into when searching for repositories.
+# The default value, -1, disables depth limits.
+#
+# SINCE 1.1.0
+git.searchRecursionDepth = -1
+
+# List of regex exclusion patterns to match against folders found in
+# *git.repositoriesFolder*.
+# Use forward slashes even on Windows!!
+# e.g. test/jgit\.git
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.searchExclusions =
+
+# List of regex url patterns for extracting a repository name when locating
+# submodules.
+#   e.g. git.submoduleUrlPatterns = .*?://github.com/(.*) will extract
+#   *gitblit/gitblit.git* from *git://github.com/gitblit/gitblit.git*
+# If no matches are found then the submodule repository name is assumed to be
+# whatever trails the last / character. (e.g. gitblit.git).
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.1.0
+git.submoduleUrlPatterns = .*?://github.com/(.*)
+
+# Specify the interface for Git Daemon to bind it's service.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+git.daemonBindInterface = 
+
+# port for serving the Git Daemon service.  <= 0 disables this service.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 9418
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+git.daemonPort = 9418
+
+# The port for serving the SSH service.  <= 0 disables this service.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 29418
+#
+# SINCE 1.5.0
+# RESTART REQUIRED
+git.sshPort = 29418
+
+# Specify the interface for the SSH daemon to bind its service.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 1.5.0
+# RESTART REQUIRED
+git.sshBindInterface = 
+
+# Specify the SSH key manager to use for retrieving, storing, and removing
+# SSH keys.
+#
+# Valid key managers are:
+#    com.gitblit.transport.ssh.FileKeyManager
+#
+# SINCE 1.5.0
+git.sshKeysManager = com.gitblit.transport.ssh.FileKeyManager
+
+# Directory for storing user SSH keys when using the FileKeyManager.
+#
+# SINCE 1.5.0
+git.sshKeysFolder= ${baseFolder}/ssh
+
+# SSH backend NIO2|MINA.
+#
+# The Apache Mina project recommends using the NIO2 backend.
+#
+# SINCE 1.5.0
+git.sshBackend = NIO2
+
+# Number of threads used to parse a command line submitted by a client over SSH
+# for execution, create the internal data structures used by that command,
+# and schedule it for execution on another thread.
+#
+# SINCE 1.5.0
+git.sshCommandStartThreads = 2
+
+
+# Allow push/pull over http/https with JGit servlet.
+# If you do NOT want to allow Git clients to clone/push to Gitblit set this
+# to false.  You might want to do this if you are only using ssh:// or git://.
+# If you set this false, consider changing the *web.otherUrls* setting to
+# indicate your clone/push urls.
+#
+# SINCE 0.5.0
+git.enableGitServlet = true
+
+# If you want to restrict all git servlet access to those with valid X509 client
+# certificates then set this value to true.
+#
+# SINCE 1.2.0
+git.requiresClientCertificate = false
+
+# Enforce date checks on client certificates to ensure that they are not being
+# used prematurely and that they have not expired.
+#
+# SINCE 1.2.0
+git.enforceCertificateValidity = true
+
+# List of OIDs to extract from a client certificate DN to map a certificate to
+# an account username.
+#
+# e.g. git.certificateUsernameOIDs = CN
+# e.g. git.certificateUsernameOIDs = FirstName LastName
+#
+# SPACE-DELIMITED
+# SINCE 1.2.0
+git.certificateUsernameOIDs = CN
+
+# Only serve/display bare repositories.
+# If there are non-bare repositories in git.repositoriesFolder and this setting
+# is true, they will be excluded from the ui. 
+#
+# SINCE 0.9.0
+git.onlyAccessBareRepositories = false
+
+
+# Specify the list of acceptable transports for pushes.
+# If this setting is empty, all transports are acceptable.
+#
+# Valid choices are: GIT HTTP HTTPS SSH
+#
+# SINCE 1.5.0
+# SPACE-DELIMITED
+git.acceptedPushTransports = HTTP HTTPS SSH
+
+# Allow an authenticated user to create a destination repository on a push if
+# the repository does not already exist.
+#
+# Administrator accounts can create a repository in any project.
+# These repositories are created with the default access restriction and authorization
+# control values.  The pushing account is set as the owner.
+#
+# Non-administrator accounts with the CREATE role may create personal repositories.
+# These repositories are created as VIEW restricted for NAMED users.
+# The pushing account is set as the owner.
+#
+# SINCE 1.2.0
+git.allowCreateOnPush = true
+
+# Global setting to control anonymous pushes.
+#
+# This setting allows/rejects anonymous pushes at the level of the receive pack.
+# This trumps all repository config settings.  While anonymous pushes are convenient
+# on your own box when you are a lone developer,  they are not recommended for
+# any multi-user installation where accountability is required.  Since Gitblit
+# tracks pushes and user accounts, allowing anonymous pushes compromises that
+# information.
+#
+# SINCE 1.4.0
+git.allowAnonymousPushes = false
+
+# The default access restriction for new repositories.
+# Valid values are NONE, PUSH, CLONE, VIEW
+#  NONE = anonymous view, clone, & push
+#  PUSH = anonymous view & clone and authenticated push
+#  CLONE = anonymous view, authenticated clone & push
+#  VIEW = authenticated view, clone, & push
+#
+# SINCE 1.0.0
+git.defaultAccessRestriction = PUSH
+
+# The default authorization control for new repositories.
+# Valid values are AUTHENTICATED and NAMED
+#  AUTHENTICATED = any authenticated user is granted restricted access
+#  NAMED = only named users/teams are granted restricted access
+#
+# SINCE 1.1.0
+git.defaultAuthorizationControl = NAMED
+
+# The prefix for a users personal repository directory.
+#
+# Personal user repositories are created in this directory, named by the user name
+# prefixed with the userRepositoryPrefix. For eaxmple, a user 'john' would have his
+# personal repositories in the directory '~john'.
+#
+# Cannot be an empty string. Also, absolute paths are changed to relative paths by 
+# removing the first directory separator.
+#
+# It is not recommended to change this value AFTER your user's have created
+# personal repositories because it will break all permissions, ownership, and
+# repository push/pull operations. 
+#
+# RESTART REQUIRED
+# SINCE 1.4.0
+git.userRepositoryPrefix = ~
+
+# The default incremental push tag prefix.  Tag prefix applied to a repository
+# that has automatic push tags enabled and does not specify a custom tag prefix.
+#
+# If incremental push tags are enabled, the tips of each branch in the push will
+# be tagged with an increasing revision integer.
+#
+# e.g. refs/tags/r2345 or refs/tags/rev_2345 
+#
+# SINCE 1.3.0
+git.defaultIncrementalPushTagPrefix = r
+
+# Controls creating a repository as --shared on Unix servers.
+#
+# In an Unix environment where mixed access methods exist for shared repositories,
+# the repository should be created with 'git init --shared' to make sure that
+# it can be accessed e.g. via ssh (user git) and http (user www-data).
+#
+# Valid values are the values available for the '--shared' option. The the manual
+# page for 'git init' for more information on shared repositories.
+#
+# SINCE 1.4.0
+git.createRepositoriesShared = false
+
+# Directory for gitignore templates used during repository creation.
+#
+# SINCE 1.6.0
+git.gitignoreFolder = ${baseFolder}/gitignore
+
+# Enable JGit-based garbage collection. (!!EXPERIMENTAL!!)
+#
+# USE AT YOUR OWN RISK!
+#
+# If enabled, the garbage collection executor scans all repositories once a day
+# at the hour of your choosing.  The GC executor will take each repository "offline",
+# one-at-a-time, to check if the repository satisfies it's GC trigger requirements.
+#
+# While the repository is offline it will be inaccessible from the web UI or from
+# any of the other services (git, rpc, rss, etc).
+#
+# Gitblit's GC Executor MAY NOT PLAY NICE with the other Git kids on the block,
+# especially on Windows systems, so if you are using other tools please coordinate
+# their usage with your GC Executor schedule or do not use this feature.
+#
+# The GC algorithm complex and the JGit team advises caution when using their
+# young implementation of GC.
+#
+# http://wiki.eclipse.org/EGit/New_and_Noteworthy/2.1#Garbage_Collector_and_Repository_Storage_Statistics
+#
+# EXPERIMENTAL
+# SINCE 1.2.0
+# RESTART REQUIRED
+git.enableGarbageCollection = false
+
+# Hour of the day for the GC Executor to scan repositories.
+# This value is in 24-hour time.
+#
+# SINCE 1.2.0
+git.garbageCollectionHour = 0
+
+# The default minimum total filesize of loose objects to trigger early garbage
+# collection.
+#
+# You may specify a custom threshold for a repository in the repository's settings.
+# Common unit suffixes of k, m, or g are supported.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionThreshold = 500k
+
+# The default period, in days, between GCs for a repository.  If the total filesize
+# of the loose object exceeds *git.garbageCollectionThreshold* or the repository's
+# custom threshold, this period will be short-circuited. 
+#
+# e.g. if a repository collects 100KB of loose objects every day with a 500KB
+# threshold and a period of 7 days, it will take 5 days for the loose objects to
+# be collected, packed, and pruned.
+#
+# OR
+#
+# if a repository collects 10KB of loose objects every day with a 500KB threshold
+# and a period of 7 days, it will take the full 7 days for the loose objects to be
+# collected, packed, and pruned.
+#
+# You may specify a custom period for a repository in the repository's settings.
+#
+# The minimum value is 1 day since the GC Executor only runs once a day.
+#
+# SINCE 1.2.0
+git.defaultGarbageCollectionPeriod = 7
+
+# Gitblit can automatically fetch ref updates for a properly configured mirror
+# repository.
+#
+# Requirements:
+# 1. you must manually clone the repository using native git
+#    git clone --mirror git://somewhere.com/myrepo.git
+# 2. the "origin" remote must be the mirror source
+# 3. the "origin" repository must be accessible without authentication OR the
+#    credentials must be embedded in the origin url (not recommended)
+#
+# Notes:
+# 1. "origin" SSH urls are untested and not likely to work
+# 2. mirrors cloned while Gitblit is running are likely to require clearing the
+#    gitblit cache (link on the repositories page of an administrator account)
+# 3. Gitblit will automatically repair any invalid fetch refspecs with a "//"
+#    sequence.
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+git.enableMirroring = false
+
+# Specify the period between update checks for mirrored repositories.
+# The shortest period you may specify between mirror update checks is 5 mins.
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+git.mirrorPeriod = 30 mins
+
+# Number of bytes of a pack file to load into memory in a single read operation.
+# This is the "page size" of the JGit buffer cache, used for all pack access
+# operations. All disk IO occurs as single window reads. Setting this too large
+# may cause the process to load more data than is required; setting this too small
+# may increase the frequency of read() system calls.
+#
+# Default on JGit is 8 KiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitWindowSize = 8k
+
+# Maximum number of bytes to load and cache in memory from pack files. If JGit
+# needs to access more than this many bytes it will unload less frequently used
+# windows to reclaim memory space within the process. As this buffer must be shared
+# with the rest of the JVM heap, it should be a fraction of the total memory available.
+#
+# The JGit team recommends setting this value larger than the size of your biggest
+# repository. This ensures you can serve most requests from memory.
+#
+# Default on JGit is 10 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitLimit = 10m
+
+# Maximum number of bytes to reserve for caching base objects that multiple deltafied
+# objects reference. By storing the entire decompressed base object in a cache Git
+# is able to avoid unpacking and decompressing frequently used base objects multiple times.
+#
+# Default on JGit is 10 MiB on all platforms. You probably do not need to adjust
+# this value.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.deltaBaseCacheLimit = 10m
+
+# Maximum number of pack files to have open at once. A pack file must be opened
+# in order for any of its data to be available in a cached window.
+#
+# If you increase this to a larger setting you may need to also adjust the ulimit
+# on file descriptors for the host JVM, as Gitblit needs additional file descriptors
+# available for network sockets and other repository data manipulation.
+#
+# Default on JGit is 128 file descriptors on all platforms.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitOpenFiles = 128
+
+# Largest object size, in bytes, that JGit will allocate as a contiguous byte
+# array. Any file revision larger than this threshold will have to be streamed,
+# typically requiring the use of temporary files under $GIT_DIR/objects to implement
+# psuedo-random access during delta decompression.
+#
+# Servers with very high traffic should set this to be larger than the size of
+# their common big files. For example a server managing the Android platform
+# typically has to deal with ~10-12 MiB XML files, so 15 m would be a reasonable
+# setting in that environment. Setting this too high may cause the JVM to run out
+# of heap space when handling very big binary files, such as device firmware or
+# CD-ROM ISO images. Make sure to adjust your JVM heap accordingly. 
+#
+# Default is 50 MiB on all platforms.
+#
+# Common unit suffixes of k, m, or g are supported.
+# Documentation courtesy of the Gerrit project.
+#
+#
+# NOTE: The importance of JGit's streamFileTreshold AND Git's bigFileThreshold
+# ISSUE: https://bugs.eclipse.org/bugs/show_bug.cgi?id=394078
+#
+# "core.bigFileThreshold  
+#
+#    Files larger than this size are stored deflated, without
+#    attempting delta compression.  Storing large files without
+#    delta compression avoids excessive memory usage, at the
+#    slight expense of increased disk usage.
+#
+#  Default is 512 MiB on all platforms.
+#  This should be reasonable for most projects as source code and other 
+#  text files can still be delta compressed, 
+#  but larger binary media files won't be."
+#  -- Git documentation
+#
+# If streamFileTreshold < bigFileTreshold you _may_ spend alot of time waiting
+# for push and/or fetch to complete.  It may even look hung.
+#
+# Until the issue is resolved gracefully, a workaround is to configure
+# bigFileThreshold < streamFileTreshold AND then repack the repository.
+#
+# e.g. from the repository folder with Gitblit NOT running:
+#     git config core.bigFileTreshold 40m
+#     git gc --aggressive
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.streamFileThreshold = 50m
+
+# When true, JGit will use mmap() rather than malloc()+read() to load data from
+# pack files.  The use of mmap can be problematic on some JVMs as the garbage
+# collector must deduce that a memory mapped segment is no longer in use before
+# a call to munmap() can be made by the JVM native code.
+#
+# In server applications (such as Gitblit) that need to access many pack files,
+# setting this to true risks artificially running out of virtual address space, 
+# as the garbage collector cannot reclaim unused mapped spaces fast enough.
+#
+# Default on JGit is false. Although potentially slower, it yields much more
+# predictable behavior.
+# Documentation courtesy of the Gerrit project.
+#
+# SINCE 1.0.0
+# RESTART REQUIRED
+git.packedGitMmap = false
+
+# Validate all received (pushed) objects are valid.
+#
+# SINCE 1.5.0
+git.checkReceivedObjects = true
+
+# Validate all referenced but not supplied objects are reachable.
+#
+# If enabled, Gitblit will verify that references to objects not contained
+# within the received pack are already reachable through at least one other
+# reference advertised to clients.
+#
+# This feature is useful when Gitblit doesn't trust the client to not provide a
+# forged SHA-1 reference to an object, in an attempt to access parts of the DAG
+# that they aren't allowed to see and which have been hidden from them via the
+# configured AdvertiseRefsHook or RefFilter.
+#
+# Enabling this feature may imply at least some, if not all, of the same functionality
+# performed by git.checkReceivedObjects. 
+#
+# SINCE 1.5.0
+git.checkReferencedObjectsAreReachable = true
+
+# Set the maximum allowed Git object size.
+#
+# If an object is larger than the given size the pack-parsing will throw an exception
+# aborting the receive-pack operation.  The default value, 0, disables maximum
+# object size checking.
+#
+# SINCE 1.5.0
+git.maxObjectSizeLimit = 0
+
+# Set the maximum allowed pack size.
+#
+# A pack exceeding this size will be rejected. The default value, -1, disables
+# maximum pack size checking.
+#
+# SINCE 1.5.0
+git.maxPackSizeLimit = -1
+
+# Use the Gitblit patch receive pack for processing contributions and tickets.
+# This allows the user to push a patch using the familiar Gerrit syntax:
+#
+#    git push <remote> HEAD:refs/for/<targetBranch>
+#
+# NOTE:
+# This requires git.enableGitServlet = true AND it requires an authenticated
+# git transport connection (http/https) when pushing from a client.
+#
+# Valid services include:
+#    com.gitblit.tickets.FileTicketService
+#    com.gitblit.tickets.BranchTicketService
+#    com.gitblit.tickets.RedisTicketService
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+tickets.service = 
+
+# Globally enable or disable creation of new bug, enhancement, task, etc tickets
+# for all repositories.
+#
+# If false, no tickets can be created through the ui for any repositories.
+# If true, each repository can control if they allow new tickets to be created.
+#
+# NOTE:
+# If a repository is accepting patchsets, new proposal tickets can be created
+# regardless of this setting.
+#
+# SINCE 1.4.0
+tickets.acceptNewTickets = true
+
+# Globally enable or disable pushing patchsets to all repositories.
+#
+# If false, no patchsets will be accepted for any repositories.
+# If true, each repository can control if they accept new patchsets.
+#
+# NOTE:
+# If a repository is accepting patchsets, new proposal tickets can be created
+# regardless of the acceptNewTickets setting.
+#
+# SINCE 1.4.0
+tickets.acceptNewPatchsets = true
+
+# Default setting to control patchset merge through the web ui.  If true, patchsets
+# must have an approval score to enable the merge button.  This setting can be
+# overriden per-repository.
+#
+# SINCE 1.4.0
+tickets.requireApproval = false
+
+# The case-insensitive regular expression used to identify and close tickets on
+# push to the integration branch for commits that are NOT already referenced as
+# a patchset tip.
+#
+# SINCE 1.5.0
+tickets.closeOnPushCommitMessageRegex = (?:fixes|closes)[\\s-]+#?(\\d+)
+
+# Specify the location of the Lucene Ticket index
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+tickets.indexFolder = ${baseFolder}/tickets/lucene
+
+# Define the url for the Redis server.
+#
+# e.g. redis://localhost:6379
+#      redis://:foobared@localhost:6379/2
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+tickets.redis.url =
+
+# The number of tickets to display on a page.
+#
+# SINCE 1.4.0
+tickets.perPage = 25
+
+# The folder where plugins are loaded from.
+#
+# SINCE 1.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+plugins.folder = ${baseFolder}/plugins
+
+# The registry of available plugins.
+#
+# SINCE 1.5.0
+plugins.registry = http://plugins.gitblit.com/plugins.json
+
+# Number of threads used to handle miscellaneous tasks in the background.
+#
+# SINCE 1.6.0
+# RESTART REQUIRED
+execution.defaultThreadPoolSize = 1
+
+#
+# Groovy Integration
+#
+
+# Location of Groovy scripts to use for Pre and Post receive hooks.
+# Use forward slashes even on Windows!!
+# e.g. c:/groovy
+#
+# RESTART REQUIRED
+# SINCE 0.8.0
+# BASEFOLDER
+groovy.scriptsFolder = ${baseFolder}/groovy
+
+# Specify the directory Grape uses for downloading libraries.
+# http://groovy.codehaus.org/Grape
+#
+# RESTART REQUIRED
+# SINCE 1.0.0
+# BASEFOLDER
+groovy.grapeFolder = ${baseFolder}/groovy/grape
+
+# Scripts to execute on Pre-Receive.
+#
+# These scripts execute after an incoming push has been parsed and validated
+# but BEFORE the changes are applied to the repository.  You might reject a
+# push in this script based on the repository and branch the push is attempting
+# to change.
+#
+# Script names are case-sensitive on case-sensitive file systems.  You may omit
+# the traditional ".groovy" from this list if your file extension is ".groovy" 
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using.  Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts!  Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.preReceiveScripts =
+
+# Scripts to execute on Post-Receive.
+#
+# These scripts execute AFTER an incoming push has been applied to a repository.
+# You might trigger a continuous-integration build here or send a notification.
+#
+# Script names are case-sensitive on case-sensitive file systems.  You may omit
+# the traditional ".groovy" from this list if your file extension is ".groovy" 
+#
+# NOTE:
+# These scripts are only executed when pushing to *Gitblit*, not to other Git
+# tooling you may be using.  Also note that these scripts are shared between
+# repositories. These are NOT repository-specific scripts!  Within the script
+# you may customize the control-flow for a specific repository by checking the
+# *repository* variable.
+# 
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.8.0
+groovy.postReceiveScripts =
+
+# Repository custom fields for Groovy Hook mechanism
+#
+# List of key=label pairs of custom fields to prompt for in the Edit Repository
+# page.  These keys are stored in the repository's git config file in the 
+# section [gitblit "customFields"].  Key names are alphanumeric only.  These
+# fields are intended to be used for the Groovy hook mechanism where a script
+# can adjust it's execution based on the custom fields stored in the repository
+# config.
+#
+# e.g. "commitMsgRegex=Commit Message Regular Expression" anotherProperty=Another
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+groovy.customFields = 
+
+#
+# Fanout Settings
+#
+
+# Fanout is a PubSub notification service that can be used by Sparkleshare
+# to eliminate repository change polling.  The fanout service runs in a separate
+# thread on a separate port from the Gitblit http/https application.
+# This service is provided so that Sparkleshare may be used with Gitblit in
+# firewalled environments or where reliance on Sparkleshare's default notifications
+# server (notifications.sparkleshare.org) is unwanted.
+#
+# This service maintains an open socket connection from the client to the
+# Fanout PubSub service. This service may not work properly behind a proxy server.  
+
+# Specify the interface for Fanout to bind it's service.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.bindInterface = 
+
+# port for serving the Fanout PubSub service.  <= 0 disables this service.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 17000
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.port = 0
+
+# Use Fanout NIO service.  If false, a multi-threaded socket service will be used.
+# Be advised, the socket implementation spawns a thread per connection plus the
+# connection acceptor thread.  The NIO implementation is completely single-threaded.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.useNio = true
+
+# Concurrent connection limit.  <= 0 disables concurrent connection throttling.
+# If > 0, only the specified number of concurrent connections will be allowed
+# and all other connections will be rejected.
+#
+# SINCE 1.2.1
+# RESTART REQUIRED
+fanout.connectionLimit = 0
+
+#
+# Authentication Settings
+#
+
+# Require authentication to see everything but the admin pages
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.authenticateViewPages = false
+
+# If web.authenticateViewPages=true you may optionally require a client-side
+# basic authentication prompt instead of the standard form-based login. 
+#
+# SINCE 1.3.0
+web.enforceHttpBasicAuthentication = false
+
+# Require admin authentication for the admin functions and pages
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.authenticateAdminPages = true
+
+# Allow Gitblit to store a cookie in the user's browser for automatic
+# authentication.  The cookie is generated by the user service.
+#
+# SINCE 0.5.0
+web.allowCookieAuthentication = true
+
+# Allow deletion of non-empty repositories. This is enforced for all delete vectors.
+#
+# SINCE 1.6.0
+web.allowDeletingNonEmptyRepositories = true
+
+# Setting to include personal repositories in the main repositories list.
+#
+# SINCE 1.6.0
+web.includePersonalRepositories = false
+
+# Config file for storing project metadata
+#
+# SINCE 1.2.0
+# BASEFOLDER
+web.projectsFile = ${baseFolder}/projects.conf
+
+# Either the full path to a user config file (users.conf)
+# OR a fully qualified class name that implements the IUserService interface.
+#
+# Any custom user service implementation must have a public default constructor.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+realm.userService = ${baseFolder}/users.conf
+
+# Ordered list of external authentication providers which will be used if
+# authentication against the local user service fails.
+#
+# Valid providers are:
+#
+#    htpasswd
+#    ldap
+#    pam
+#    redmine
+#    salesforce
+#    windows
+
+# e.g. realm.authenticationProviders = htpasswd windows
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+# SPACE-DELIMITED
+realm.authenticationProviders =
+
+# How to store passwords.
+# Valid values are plain, md5, or combined-md5.  md5 is the hash of password.
+# combined-md5 is the hash of username.toLowerCase()+password.
+# Default is md5.
+#
+# SINCE 0.5.0 
+realm.passwordStorage = md5
+
+# Minimum valid length for a plain text password.
+# Default value is 5.  Absolute minimum is 4.
+#
+# SINCE 0.5.0 
+realm.minPasswordLength = 5
+
+#
+# Gitblit Web Settings
+#
+# If blank Gitblit is displayed.
+#
+# SINCE 0.5.0
+web.siteName =
+
+# The canonical url of your Gitblit server to be used in repository url generation,
+# RSS feeds, and all embedded links in email and plugin-based notifications.
+#
+# If you are running Gitblit on a non-standard http port (i.e. not 80 and not 443)
+# then you must specify that port in this url otherwise your generated urls will be
+# incorrect.
+#
+# The hostname of this url will be extracted for SSH and GIT protocol repository
+# url generation.
+#
+# e.g. web.canonicalUrl = https://dev.gitblit.com
+#      web.canonicalUrl = https://dev.gitblit.com:8443
+#
+# SINCE 1.4.0
+web.canonicalUrl = 
+
+# You may specify a different logo image for the header but it must be 120x45px.
+# If the specified file does not exist, the default Gitblit logo will be used.
+#
+# SINCE 1.3.0
+# BASEFOLDER
+web.headerLogo = ${baseFolder}/logo.png
+
+# You may specify a different link URL for the logo image anchor.
+# If blank the Gitblit main page URL is used.
+#
+# SINCE 1.3.0
+# BASEFOLDER
+web.rootLink =
+
+# You may specify a custom header background CSS color.  If unspecified, the
+# default color will be used.
+#
+# e.g. web.headerBackgroundColor = #002060
+#
+# SINCE 1.3.0
+web.headerBackgroundColor =
+
+# You may specify a custom header foreground CSS color.  If unspecified, the
+# default color will be used.
+#
+# e.g. web.headerForegroundColor = white
+#
+# SINCE 1.3.0
+web.headerForegroundColor =
+
+# You may specify a custom header foreground hover CSS color.  If unspecified, the
+# default color will be used.
+#
+# e.g. web.headerHoverColor = white
+#
+# SINCE 1.3.0
+web.headerHoverColor =
+
+# You may specify a custom header border CSS color.  If unspecified, the default
+# color will be used.
+#
+# e.g. web.headerBorderColor = #002060
+#
+# SINCE 1.3.0
+web.headerBorderColor =
+
+# You may specify a custom header border CSS color.  If unspecified, the default
+# color will be used.
+#
+# e.g. web.headerBorderFocusColor = #ff9900
+#
+# SINCE 1.3.0
+web.headerBorderFocusColor =
+
+# If *web.authenticateAdminPages*=true, users with "admin" role can create
+# repositories, create users, and edit repository metadata.
+#
+# If *web.authenticateAdminPages*=false, any user can execute the aforementioned
+# functions. 
+#
+# SINCE 0.5.0 
+web.allowAdministration = true
+
+# Setting to disable rendering the top-level navigation header which includes
+# the login form, top-level links like dashboard, repositories, search, etc.
+# This setting is only useful if you plan to embed Gitblit within another page
+# or system.
+#
+# SINCE 1.4.0
+web.hideHeader = false
+
+# Allows rpc clients to list repositories and possibly manage or administer the 
+# Gitblit server, if the authenticated account has administrator permissions.
+# See *web.enableRpcManagement* and *web.enableRpcAdministration*.
+#
+# SINCE 0.7.0 
+web.enableRpcServlet = true
+
+# Allows rpc clients to manage repositories and users of the Gitblit instance,
+# if the authenticated account has administrator permissions.
+# Requires *web.enableRpcServlet=true*.
+#
+# SINCE 0.7.0 
+web.enableRpcManagement = false
+
+# Allows rpc clients to control the server settings and monitor the health of this
+# this Gitblit instance, if the authenticated account has administrator permissions.
+# Requires *web.enableRpcServlet=true* and *web.enableRpcManagement*.
+#
+# SINCE 0.7.0 
+web.enableRpcAdministration = false
+
+# Full path to a configurable robots.txt file.  With this file you can control
+# what parts of your Gitblit server respectable robots are allowed to traverse.
+# http://googlewebmastercentral.blogspot.com/2008/06/improving-on-robots-exclusion-protocol.html
+#
+# SINCE 1.0.0
+# BASEFOLDER
+web.robots.txt = ${baseFolder}/robots.txt
+
+# The number of minutes to cache a page in the browser since the last request.
+# The default value is 0 minutes.  A value <= 0 disables all page caching which
+# is the default behavior for Gitblit <= 1.3.0.
+#
+# SINCE 1.3.1
+web.pageCacheExpires = 0
+
+# If true, the web ui layout will respond and adapt to the browser's dimensions.
+# if false, the web ui will use a 940px fixed-width layout.
+# http://twitter.github.com/bootstrap/scaffolding.html#responsive
+#
+# SINCE 1.0.0
+web.useResponsiveLayout = true
+
+# Allow Gravatar images to be displayed in Gitblit pages.
+#
+# SINCE 0.8.0
+web.allowGravatar = true
+
+# Allow dynamic zip downloads.
+#
+# SINCE 0.5.0   
+web.allowZipDownloads = true
+
+# If *web.allowZipDownloads=true* the following formats will be displayed for
+# download compressed archive links:
+#
+# zip   = standard .zip
+# tar   = standard tar format (preserves *nix permissions and symlinks)
+# gz    = gz-compressed tar
+# xz    = xz-compressed tar
+# bzip2 = bzip2-compressed tar
+#
+# SPACE-DELIMITED
+# SINCE 1.2.0
+web.compressedDownloads = zip gz
+
+# Allow optional Lucene integration. Lucene indexing is an opt-in feature.
+# A repository may specify branches to index with Lucene instead of using Git
+# commit traversal. There are scenarios where you may want to completely disable
+# Lucene indexing despite a repository specifying indexed branches.  One such
+# scenario is on a resource-constrained federated Gitblit mirror.
+#
+# SINCE 0.9.0
+web.allowLuceneIndexing = true
+
+# Allows an authenticated user to create forks of a repository
+#
+# set this to false if you want to disable all fork controls on the web site
+#
+web.allowForking = true
+
+# Controls the length of shortened commit hash ids
+#
+# SINCE 1.2.0
+web.shortCommitIdLength = 6
+
+# Use Clippy (Flash solution) to provide a copy-to-clipboard button.
+# If false, a button with a more primitive JavaScript-based prompt box will
+# offer a 3-step (click, ctrl+c, enter) copy-to-clipboard alternative.
+#
+# SINCE 0.8.0
+web.allowFlashCopyToClipboard = true
+
+# Default maximum number of commits that a repository may contribute to the
+# activity page, regardless of the selected duration.  This setting may be valuable
+# for an extremely busy server.  This value may also be configed per-repository
+# in Edit Repository. 0 disables this throttle.
+#
+# SINCE 1.2.0
+web.maxActivityCommits = 0
+
+# Default number of entries to include in RSS Syndication links
+#
+# SINCE 0.5.0
+web.syndicationEntries = 25
+
+# Show the size of each repository on the repositories page.
+# This requires recursive traversal of each repository folder.  This may be
+# non-performant on some operating systems and/or filesystems. 
+#
+# SINCE 0.5.2
+web.showRepositorySizes = true
+
+# List of custom regex expressions that can be displayed in the Filters menu
+# of the Repositories and Activity pages.  Keep them very simple because you
+# are likely to run into encoding issues if they are too complex.
+#
+# Use !!! to separate the filters 
+#
+# SINCE 0.8.0
+web.customFilters =
+
+# Show federation registrations (without token) and the current pull status
+# to non-administrator users. 
+#
+# SINCE 0.6.0
+web.showFederationRegistrations = false
+
+# This is the message displayed when *web.authenticateViewPages=true*.
+# This can point to a file with Markdown content.
+# Specifying "gitblit" uses the internal login message.
+#
+# SINCE 0.7.0
+# BASEFOLDER
+web.loginMessage = gitblit
+
+# This is the message displayed above the repositories table.
+# This can point to a file with Markdown content.
+# Specifying "gitblit" uses the internal welcome message.
+#
+# SINCE 0.5.0
+# BASEFOLDER
+web.repositoriesMessage = gitblit
+
+# Ordered list of charsets/encodings to use when trying to display a blob.
+# If empty, UTF-8 and ISO-8859-1 are used.  The server's default charset
+# is always appended to the encoding list.  If all encodings fail to cleanly
+# decode the blob content, UTF-8 will be used with the standard malformed
+# input/unmappable character replacement strings.
+# 
+# SPACE-DELIMITED
+# SINCE 1.0.0
+web.blobEncodings = UTF-8 ISO-8859-1
+
+# Manually set the default timezone to be used by Gitblit for display in the 
+# web ui.  This value is independent of the JVM timezone.  Specifying a blank
+# value will default to the JVM timezone.
+# e.g. America/New_York, US/Pacific, UTC, Europe/Berlin
+#
+# SINCE 0.9.0
+# RESTART REQUIRED
+web.timezone =
+
+# Use the client timezone when formatting dates.
+# This uses AJAX to determine the browser's timezone and may require more
+# server overhead because a Wicket session is created.  All Gitblit pages
+# attempt to be stateless, if possible.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.useClientTimezone = false
+
+# Time format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.8.0
+web.timeFormat = HH:mm
+
+# Short date format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.5.0
+web.datestampShortFormat = yyyy-MM-dd
+
+# Long date format
+#
+# SINCE 0.8.0
+web.datestampLongFormat = EEEE, MMMM d, yyyy
+
+# Long timestamp format
+# <http://download.oracle.com/javase/6/docs/api/java/text/SimpleDateFormat.html>
+#
+# SINCE 0.5.0
+web.datetimestampLongFormat = EEEE, MMMM d, yyyy HH:mm Z
+
+# Mount URL parameters
+# This setting controls if pretty or parameter URLs are used.
+# i.e.
+# if true:
+#     http://localhost/commit/myrepo/abcdef
+# if false:
+#     http://localhost/commit/?r=myrepo&h=abcdef
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.mountParameters = true
+
+# Some servlet containers (e.g. Tomcat >= 6.0.10) disallow '/' (%2F) encoding
+# in URLs as a security precaution for proxies.  This setting tells Gitblit
+# to preemptively replace '/' with '*' or '!' for url string parameters.
+#
+# <https://issues.apache.org/jira/browse/WICKET-1303>
+# <http://tomcat.apache.org/security-6.html#Fixed_in_Apache_Tomcat_6.0.10>
+# Add *-Dorg.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH=true* to your
+# *CATALINA_OPTS* or to your JVM launch parameters
+#
+# SINCE 0.5.2
+web.forwardSlashCharacter = /
+
+# Show other URLs on the summary page for accessing your git repositories
+# Use spaces to separate urls.
+#
+# {0} is the token for the repository name
+# {1} is the token for the username
+#
+# The username is only practical if you have setup your other git serving
+# solutions accounts to have the same username as the Gitblit account.
+#
+# e.g.
+# web.otherUrls = ssh://localhost/git/{0} git://localhost/git/{0} https://{1}@localhost/r/{0}
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.otherUrls = 
+
+# Should app-specific clone links be displayed for SourceTree, SparkleShare, etc?
+#
+# SINCE 1.3.0
+web.allowAppCloneLinks = true
+
+# Choose how to present the repositories list.
+#   grouped = group nested/subfolder repositories together (no sorting)
+#   flat = flat list of repositories (sorting allowed)
+#
+# SINCE 0.5.0
+web.repositoryListType = grouped
+
+# If using a grouped repository list and there are repositories at the
+# root level of your repositories folder, you may specify the displayed
+# group name with this setting.  This value is only used for web presentation.
+#
+# SINCE 0.5.0
+web.repositoryRootGroupName = main
+
+# Display the repository swatch color next to the repository name link in the 
+# repositories list. 
+#
+# SINCE 0.8.0
+web.repositoryListSwatches = true
+
+# Defines the default commit message renderer.  This can be configured
+# per-repository.
+#
+# Valid values are: plain, markdown
+#
+# SINCE 1.4.0
+web.commitMessageRenderer = plain
+
+# Control if email addresses are shown in web ui
+#
+# SINCE 0.5.0
+web.showEmailAddresses = true
+
+# Shows a combobox in the page links header with commit, committer, and author
+# search selection.  Default search is commit.
+#
+# SINCE 0.5.0
+web.showSearchTypeSelection = false
+
+# Controls display of activity graphs on the dashboard, activity, and summary
+# pages.  Charting makes use of the external Google Charts API.
+#
+# SINCE 0.5.0 
+web.generateActivityGraph = true
+
+# Displays the commits branch graph in the summary page and commits/log page.
+#
+# SINCE 1.4.0
+web.showBranchGraph = true
+
+# The default number of days to show on the activity page.
+# Value must exceed 0 else default of 7 is used
+#
+# SINCE 0.8.0
+web.activityDuration = 7
+
+# Choices for days of activity to display.
+#
+# SPACE-DELIMITED
+# SINCE 1.3.0
+web.activityDurationChoices = 1 3 7 14 21 28
+
+# Maximum number of days of activity that may be displayed on the activity page.
+#
+# SINCE 1.3.2
+web.activityDurationMaximum = 30
+
+# The number of days of commits to cache in memory for the dashboard, activity,
+# and project pages.  A value of 0 will disable all caching and will parse commits
+# in each repository per-request.  If the value > 0 these pages will try to fulfill
+# requests using the commit cache.  If the request specifies a period which falls
+# outside the commit cache window, then the cache will be ignored and the request
+# will be fulfilled by brute-force parsing all relevant commits per-repository.
+#
+# Consider the values specified for *web.activityDurationChoices* when setting
+# the cache size AND consider adjusting the JVM -Xmx heap parameter appropriately.
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+web.activityCacheDays = 14
+
+# Case-insensitive list of authors to exclude from metrics.  Useful for
+# eliminating bots.
+#
+# SPACE-DELIMITED
+# SINCE 1.3.0
+web.metricAuthorExclusions =
+
+# The number of commits to display on the summary page
+# Value must exceed 0 else default of 20 is used
+#
+# SINCE 0.5.0
+web.summaryCommitCount = 16
+
+# The number of tags/branches to display on the summary page.
+# -1 = all tags/branches
+# 0 = hide tags/branches
+# N = N tags/branches
+#
+# SINCE 0.5.0
+web.summaryRefsCount = 5
+
+# Show a README file, if available, on the summary page.
+#
+# SINCE 1.4.0
+web.summaryShowReadme = false
+
+# The number of items to show on a page before showing the first, prev, next
+# pagination links.  A default of 50 is used for any invalid value.
+#
+# SINCE 0.5.0
+web.itemsPerPage = 50
+
+# The number of reflog changes to display on the overview page
+# Value must exceed 0 else default of 5 is used
+#
+# SINCE 1.3.0
+web.overviewReflogCount = 5
+
+# The number of reflog changes to show on a reflog page before show the first,
+#  prev, next pagination links.  A default of 10 is used for any invalid value.
+#
+# SINCE 1.3.0
+web.reflogChangesPerPage = 10
+
+# Specify the names of documents in the root of your repository to be displayed
+# in tabs on your repository docs page.  If the name is not found in the root
+# then no tab is added.  The order specified is the order displayed.  Do not
+# specify a file extension as the aggregation of markup extensions + txt are used
+# in the search algorithm.
+#
+# SPACE-DELIMITED
+# SINCE 1.4.0
+web.documents = readme home index changelog contributing submitting_patches copying license notice authors
+
+# Registered file extensions to ignore during Lucene indexing
+#
+# SPACE-DELIMITED
+# SINCE 0.9.0
+web.luceneIgnoreExtensions = 7z arc arj bin bmp dll doc docx exe gif gz jar jpg lib lzh odg odf odt pdf ppt pptx png so swf tar xcf xls xlsx zip
+
+# Registered extensions for google-code-prettify
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.prettyPrintExtensions = aea agc basic c cbm cl clj cpp cs css dart el erl erlang frm fs go groovy h hpp hs htm html java js latex lisp ll llvm lsp lua ml moxie mumps n nemerle pascal php pl pm prefs properties proto py r R rb rd Rd rkt s S scala scm sh Splus sql ss tcl tex vb vbs vhd vhdl wiki xml xq xquery yaml yml ymlapollo
+
+# Registered extensions for markdown transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.5.0
+web.markdownExtensions = md mkd markdown MD MKD
+
+# Registered extensions for mediawiki transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.mediawikiExtensions = mw mediawiki
+
+# Registered extensions for twiki transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.twikiExtensions = twiki
+
+# Registered extensions for textile transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.textileExtensions = textile
+
+# Registered extensions for confluence transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.confluenceExtensions = confluence
+
+# Registered extensions for tracwiki transformation
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 1.4.0
+web.tracwikiExtensions = tracwiki
+
+# Image extensions
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.imageExtensions = bmp jpg gif png 
+
+# Registered extensions for binary blobs
+#
+# SPACE-DELIMITED
+# SINCE 0.5.0
+web.binaryExtensions = 7z arc arj bin dll doc docx exe gz jar lib lzh odg odf odt pdf ppt pptx so tar xls xlsx zip
+
+# Aggressive heap management will run the garbage collector on every generated
+# page.  This slows down page generation a little but improves heap consumption. 
+#
+# SINCE 0.5.0
+web.aggressiveHeapManagement = false
+
+# Run the webapp in debug mode
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+web.debugMode = false
+
+# Force a default locale for all users, ignoring the browser's settings.
+# An empty value allows Gitblit to use the translation preferred by the browser.
+#
+# Changing this value while the server is running will only affect new sessions.
+#
+# e.g. web.forceDefaultLocale = en
+#
+# SINCE 1.3.0
+web.forceDefaultLocale = 
+
+# Enable/disable global regex substitutions (i.e. shared across repositories)
+#
+# SINCE 0.5.0
+# DEPRECATED 1.4.0 (migrate to bugtraq instead)
+regex.global = true
+
+# Example global regex substitutions
+# Use !!! to separate the search pattern and the replace pattern
+# searchpattern!!!replacepattern
+# SINCE 0.5.0
+
+# regex.global.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://somehost/bug/$3">$3</a>
+# SINCE 0.5.0
+
+# Example Gerrit links
+# regex.global.changeid = \\b(Change-Id:\\s*)([A-Za-z0-9]*)\\b!!!Change-Id: <a href="http://somehost/r/#q,$2,n,z">$2</a>
+# regex.global.reviewedon = \\b(Reviewed-on:\\s*)([A-Za-z0-9:/\\.]*)\\b!!!Reviewed-on: <a href="$2">$2</a>
+
+# Example per-repository regex substitutions overrides global
+# SINCE 0.5.0
+# regex.myrepository.bug = \\b(Bug:)(\\s*[#]?|-){0,1}(\\d+)\\b!!!Bug: <a href="http://elsewhere/bug/$3">$3</a>
+
+#
+# Mail Settings
+# SINCE 0.6.0
+#
+# Mail settings are used to notify administrators of received federation proposals
+#
+
+# ip or hostname of smtp server
+#
+# SINCE 0.6.0
+mail.server =
+
+# port to use for smtp requests
+#
+# SINCE 0.6.0
+mail.port = 25
+
+# debug the mail executor
+#
+# SINCE 0.6.0
+mail.debug = false
+
+# use SMTPs flag
+mail.smtps = false
+
+# use STARTTLS flag
+#
+# SINCE 1.6.0
+mail.starttls = false
+
+# if your smtp server requires authentication, supply the credentials here
+#
+# SINCE 0.6.0
+mail.username =
+# SINCE 0.6.0
+mail.password =
+
+# from address for generated emails
+#
+# SINCE 0.6.0
+mail.fromAddress = 
+
+# List of email addresses for the Gitblit administrators
+#
+# SPACE-DELIMITED
+# SINCE 0.6.0
+mail.adminAddresses = 
+
+# List of email addresses for sending push email notifications.
+#
+# This key currently requires use of the sendemail.groovy hook script.
+# If you set sendemail.groovy in *groovy.postReceiveScripts* then email
+# notifications for all repositories (regardless of access restrictions!)
+# will be sent to these addresses.
+#
+# SPACE-DELIMITED
+# SINCE 0.8.0
+mail.mailingLists =
+
+#
+# Federation Settings
+# SINCE 0.6.0
+#
+# A Gitblit federation is a way to backup one Gitblit instance to another.
+#
+# *git.enableGitServlet* must be true to use this feature.
+
+# Your federation name is used for federation status acknowledgments.  If it is
+# unset, and you elect to send a status acknowledgment, your Gitblit instance
+# will be identified by its hostname, if available, else your internal ip address.
+# The source Gitblit instance will also append your external IP address to your
+# identification to differentiate multiple pulling systems behind a single proxy.
+#
+# SINCE 0.6.0
+federation.name =
+
+# Specify the passphrase of this Gitblit instance.
+#
+# An unspecified (empty) passphrase disables processing federation requests.
+#
+# This value can be anything you want: an integer, a sentence, an haiku, etc.
+# Keep the value simple, though, to avoid Java properties file encoding issues.
+#
+# Changing your passphrase will break any registrations you have established with other
+# Gitblit instances.
+#
+# CASE-SENSITIVE
+# SINCE 0.6.0
+# RESTART REQUIRED *(only to enable or disable federation)*
+federation.passphrase =
+
+# Control whether or not this Gitblit instance can receive federation proposals
+# from another Gitblit instance.  Registering a federated Gitblit is a manual
+# process.  Proposals help to simplify that process by allowing a remote Gitblit
+# instance to send your Gitblit instance the federation pull data.
+#
+# SINCE 0.6.0
+federation.allowProposals = false
+
+# The destination folder for cached federation proposals.
+# Use forward slashes even on Windows!!
+#
+# SINCE 0.6.0
+# BASEFOLDER
+federation.proposalsFolder = ${baseFolder}/proposals
+
+# The default pull frequency if frequency is unspecified on a registration
+#
+# SINCE 0.6.0
+federation.defaultFrequency = 60 mins
+
+# Federation Sets are named groups of repositories.  The Federation Sets are 
+# available for selection in the repository settings page.  You can assign a
+# repository to one or more sets and then distribute the token for the set.
+# This allows you to grant federation pull access to a subset of your available
+# repositories.  Tokens for federation sets only grant repository pull access.
+#
+# SPACE-DELIMITED
+# CASE-SENSITIVE
+# SINCE 0.6.0
+federation.sets = 
+
+# Federation pull registrations
+# Registrations are read once, at startup.
+#
+# RESTART REQUIRED
+#
+# frequency:
+#   The shortest frequency allowed is every 5 minutes
+#   Decimal frequency values are cast to integers
+#   Frequency values may be specified in mins, hours, or days
+#   Values that can not be parsed or are unspecified default to *federation.defaultFrequency*
+#
+# folder:
+#   if unspecified, the folder is *git.repositoriesFolder*
+#   if specified, the folder is relative to *git.repositoriesFolder*
+#
+# bare:
+#   if true, each repository will be created as a *bare* repository and will not
+#   have a working directory.
+#
+#   if false, each repository will be created as a normal repository suitable
+#   for local work.
+#
+# mirror:
+#   if true, each repository HEAD is reset to *origin/master* after each pull.
+#   The repository will be flagged *isFrozen* after the initial clone.
+#
+#   if false, each repository HEAD will point to the FETCH_HEAD of the initial
+#   clone from the origin until pushed to or otherwise manipulated.
+#
+# mergeAccounts:
+#   if true, remote accounts and their permissions are merged into your 
+#   users.properties file 
+#
+# notifyOnError:
+#   if true and the mail configuration is properly set, administrators will be
+#   notified by email of pull failures
+#
+# include and exclude:
+#   Space-delimited list of repositories to include or exclude from pull
+#   may be * wildcard to include or exclude all
+#   may use fuzzy match (e.g. org.eclipse.*)
+
+#
+# (Nearly) Perfect Mirror example
+#
+
+#federation.example1.url = https://go.gitblit.com
+#federation.example1.token = 6f3b8a24bf970f17289b234284c94f43eb42f0e4
+#federation.example1.frequency = 120 mins
+#federation.example1.folder =
+#federation.example1.bare = true 
+#federation.example1.mirror = true 
+#federation.example1.mergeAccounts = true
+
+#
+# Advanced Realm Settings
+#
+
+# Auto-creates user accounts based on the servlet container principal.  This
+# assumes that your Gitblit install is a protected resource and your container's
+# authentication process intercepts all Gitblit requests.
+#
+# SINCE 1.3.0
+realm.container.autoCreateAccounts = false
+
+# Allow or prohibit Windows guest account logins
+#
+# SINCE 1.3.0
+realm.windows.allowGuests = false
+
+# Allow user accounts belonging to the BUILTIN\Administrators group to be
+# Gitblit administrators.
+#
+# SINCE 1.4.0
+realm.windows.permitBuiltInAdministrators = true
+
+# The default domain for authentication.
+#
+# If specified, this domain will be used for authentication UNLESS the supplied
+# login name manually specifies a domain (.e.g. mydomain\james or james@mydomain)
+#
+# If unspecified, the username must be specified in UPN format (name@domain).
+#
+# if "." (dot) is specified, ONLY the local account database will be used.
+#
+# SINCE 1.3.0
+realm.windows.defaultDomain =
+
+# The PAM service name for authentication.
+# default: system-auth
+#
+# SINCE 1.3.1
+realm.pam.serviceName = system-auth
+
+# The Apache htpasswd file that contains the users and passwords.
+# default: ${baseFolder}/htpasswd
+#
+# RESTART REQUIRED
+# BASEFOLDER
+# SINCE 1.3.2
+realm.htpasswd.userfile = ${baseFolder}/htpasswd
+
+# Restrict the Salesforce user to members of this org.
+# default: 0 (i.e. do not check the Org ID)
+#
+# SINCE 1.3.0
+realm.salesforce.orgId = 0
+
+# URL of the LDAP server.
+# To use encrypted transport, use either ldaps:// URL for SSL or ldap+tls:// to
+# send StartTLS command.
+#
+# SINCE 1.0.0
+realm.ldap.server = ldap://localhost
+
+# Login username for LDAP searches.
+# If this value is unspecified, anonymous LDAP login will be used.
+# 
+# e.g. mydomain\\username
+#
+# SINCE 1.0.0
+realm.ldap.username = cn=Directory Manager
+
+# Login password for LDAP searches.
+#
+# SINCE 1.0.0
+realm.ldap.password = password
+
+# Bind pattern for Authentication.
+# Allow to directly authenticate an user without LDAP Searches.
+# 
+# e.g. CN=${username},OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain
+#
+# SINCE 1.5.0
+realm.ldap.bindpattern = 
+
+
+# Delegate team membership control to LDAP.
+#
+# If true, team user memberships will be specified by LDAP groups.  This will
+# disable team selection in Edit User and user selection in Edit Team.
+#
+# If false, LDAP will only be used for authentication and Gitblit will maintain
+# team memberships with the *realm.ldap.backingUserService*.
+#
+# SINCE 1.0.0
+realm.ldap.maintainTeams = false
+
+# Root node for all LDAP users
+#
+# This is the root node from which subtree user searches will begin.
+# If blank, Gitblit will search ALL nodes.
+#
+# SINCE 1.0.0
+realm.ldap.accountBase = OU=Users,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP users
+#
+# Query pattern to use when searching for a user account. This may be any valid 
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+#    ${username} - The text entered as the user name
+#
+# SINCE 1.0.0
+realm.ldap.accountPattern = (&(objectClass=person)(sAMAccountName=${username}))
+
+# Root node for all LDAP groups to be used as Gitblit Teams
+#
+# This is the root node from which subtree team searches will begin.
+# If blank, Gitblit will search ALL nodes.  
+#
+# SINCE 1.0.0
+realm.ldap.groupBase = OU=Groups,OU=UserControl,OU=MyOrganization,DC=MyDomain
+
+# Filter criteria for LDAP groups
+#
+# Query pattern to use when searching for a team. This may be any valid 
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# Variables may be injected via the ${variableName} syntax.
+# Recognized variables are:
+#    ${username} - The text entered as the user name
+#    ${dn} - The Distinguished Name of the user logged in
+#
+# All attributes from the LDAP User record are available. For example, if a user
+# has an attribute "fullName" set to "John", "(fn=${fullName})" will be 
+# translated to "(fn=John)".
+#
+# SINCE 1.0.0
+realm.ldap.groupMemberPattern = (&(objectClass=group)(member=${dn}))
+
+# Filter criteria for empty LDAP groups
+#
+# Query pattern to use when searching for an empty team. This may be any valid 
+# LDAP query expression, including the standard (&) and (|) operators.
+#
+# default: (&(objectClass=group)(!(member=*)))
+# SINCE 1.4.0
+realm.ldap.groupEmptyMemberPattern = (&(objectClass=group)(!(member=*)))
+
+# LDAP users or groups that should be given administrator privileges.
+#
+# Teams are specified with a leading '@' character.  Groups with spaces in the
+# name can be entered as "@team name".  This setting only applies when using
+# LDAP to maintain team memberships.
+#
+# e.g. realm.ldap.admins = john @git_admins "@git admins"
+#
+# SPACE-DELIMITED
+# SINCE 1.0.0
+realm.ldap.admins = @Git_Admins
+
+# Attribute(s) on the USER record that indicate their display (or full) name.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes.  Examples:
+#  displayName - Uses the attribute 'displayName' on the user record
+#  ${personalTitle}. ${givenName} ${surname} - Will concatenate the 3 
+#       attributes together, with a '.' after personalTitle
+#
+# SINCE 1.0.0
+realm.ldap.displayName = displayName
+
+# Attribute(s) on the USER record that indicate their email address.
+# Leave blank for no mapping available in LDAP.
+#
+# This may be a single attribute, or a string of multiple attributes.  Examples:
+#  email - Uses the attribute 'email' on the user record
+#  ${givenName}.${surname}@gitblit.com -Will concatenate the 2 attributes
+#       together with a '.' and '@' creating something like first.last@gitblit.com 
+#
+# SINCE 1.0.0
+realm.ldap.email = email
+
+# Attribute on the USER record that indicate their username to be used in gitblit
+# when synchronizing users from LDAP
+# if blank, Gitblit will use uid
+# For MS Active Directory this may be sAMAccountName
+#
+# SINCE 1.0.0
+realm.ldap.uid = uid
+
+# Defines whether to synchronize all LDAP users and teams into the user service
+#
+# Valid values: true, false
+# If left blank, false is assumed
+#
+# SINCE 1.4.0
+realm.ldap.synchronize = false
+
+# Defines the period to be used when synchronizing users and teams from ldap.
+#
+# Must be of the form '<long> <TimeUnit>' where <TimeUnit> is one of 'MILLISECONDS', 'SECONDS', 'MINUTES', 'HOURS', 'DAYS' 
+
+# default: 5 MINUTES
+#
+# RESTART REQUIRED
+# SINCE 1.4.0
+realm.ldap.syncPeriod = 5 MINUTES
+
+# Defines whether to delete non-existent LDAP users from the user service
+# during synchronization. depends on  realm.ldap.synchronize = true
+#
+# Valid values: true, false
+# If left blank, true is assumed
+#
+# SINCE 1.4.0
+realm.ldap.removeDeletedUsers = true
+
+# URL of the Redmine.
+#
+# SINCE 1.2.0
+realm.redmine.url = http://example.com/redmine
+
+#
+# Gitblit GO Server Settings
+# The following settings only affect the integrated GO variant.
+#
+
+# The temporary folder to decompress the embedded gitblit webapp. 
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+# BASEFOLDER
+server.tempFolder = ${baseFolder}/temp
+
+# Specify the maximum number of concurrent http/https Jetty worker
+# threads to allow.  This setting does not affect other threaded
+# daemons and components of Gitblit.
+#
+# SINCE 1.3.0
+# RESTART REQUIRED
+server.threadPoolSize = 50
+
+# Context path for the GO application.  You might want to change the context
+# path if running Gitblit behind a proxy layer such as mod_proxy.
+#
+# SINCE 0.7.0
+# RESTART REQUIRED
+server.contextPath = /
+
+# Standard http port to serve.  <= 0 disables this connector.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 80 or 8080
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpPort = 0
+
+# Secure/SSL https port to serve. <= 0 disables this connector.
+# On Unix/Linux systems, ports < 1024 require root permissions.
+# Recommended value: 443 or 8443
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpsPort = 8443
+
+# Automatically redirect http requests to the secure https connector.
+#
+# This setting requires that you have configured server.httpPort and server.httpsPort.
+# Unless you are on a private LAN where you trust all client connections, it is
+# recommended to use https for all communications.
+#
+# SINCE 1.4.0
+# RESTART REQUIRED
+server.redirectToHttpsPort = false
+
+# Specify the interface for Jetty to bind the standard connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpBindInterface =
+
+# Specify the interface for Jetty to bind the secure connector.
+# You may specify an ip or an empty value to bind to all interfaces.
+# Specifying localhost will result in Gitblit ONLY listening to requests to
+# localhost.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.httpsBindInterface =
+
+# Alias of certificate to use for https/SSL serving.  If blank the first
+# certificate found in the keystore will be used. 
+#
+# SINCE 1.2.0
+# RESTART REQUIRED
+server.certificateAlias = localhost
+
+# Password for SSL keystore.
+# Keystore password and certificate password must match.
+# This is provided for convenience, its probably more secure to set this value
+# using the --storePassword command line parameter.
+#
+# If you are using the official JRE or JDK from Oracle you may not have the
+# JCE Unlimited Strength Jurisdiction Policy files bundled with your JVM.  Because
+# of this, your store/key password can not exceed 7 characters.  If you require
+# longer passwords you may need to install the JCE Unlimited Strength Jurisdiction
+# Policy files from Oracle.
+#
+# http://www.oracle.com/technetwork/java/javase/downloads/index.html
+#
+# Gitblit and the Gitblit Certificate Authority will both indicate if Unlimited
+# Strength encryption is available.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.storePassword = gitblit
+
+# If serving over https (recommended) you might consider requiring clients to
+# authenticate with ssl certificates.  If enabled, only https clients with the
+# a valid client certificate will be able to access Gitblit.
+#
+# If disabled, client certificate authentication is optional and will be tried
+# first before falling-back to form authentication or basic authentication.
+#
+# Requiring client certificates to access any of Gitblit may be too extreme,
+# consider this carefully.
+#
+# SINCE 1.2.0
+# RESTART REQUIRED
+server.requireClientCertificates = false
+
+# Port for shutdown monitor to listen on.
+#
+# SINCE 0.5.0
+# RESTART REQUIRED
+server.shutdownPort = 8081