gitea/custom/conf/app.example.ini

; This file lists the default values used by Gitea
;; Copy required sections to your own app.ini (default is custom/conf/app.ini)
;; and modify as needed.
;; Do not copy the whole file as-is, as it contains some invalid sections for illustrative purposes.
;; If you don't know what a setting is you should not set it.
;;
;; see https://docs.gitea.io/en-us/config-cheat-sheet/ for additional documentation.


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Default Configuration (non-`app.ini` configuration)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; These values are environment-dependent but form the basis of a lot of values. They will be
;; reported as part of the default configuration when running `gitea --help` or on start-up. The order they are emitted there is slightly different but we will list them here in the order they are set-up.
;;
;; - _`AppPath`_: This is the absolute path of the running gitea binary.
;; - _`AppWorkPath`_: This refers to "working path" of the `gitea` binary. It is determined by using the first set thing in the following hierarchy:
;;   - The "WORK_PATH" option in "app.ini" file
;;   - The `--work-path` flag passed to the binary
;;   - The environment variable `$GITEA_WORK_DIR`
;;   - A built-in value set at build time (see building from source)
;;   - Otherwise it defaults to the directory of the _`AppPath`_
;;   - If any of the above are relative paths then they are made absolute against the directory of the _`AppPath`_
;; - _`CustomPath`_: This is the base directory for custom templates and other options. It is determined by using the first set thing in the following hierarchy:
;;   - The `--custom-path` flag passed to the binary
;;   - The environment variable `$GITEA_CUSTOM`
;;   - A built-in value set at build time (see building from source)
;;   - Otherwise it defaults to _`AppWorkPath`_`/custom`
;;   - If any of the above are relative paths then they are made absolute against the directory of the _`AppWorkPath`_
;; - _`CustomConf`_: This is the path to the `app.ini` file.
;;   - The `--config` flag passed to the binary
;;   - A built-in value set at build time (see building from source)
;;   - Otherwise it defaults to _`CustomPath`_`/conf/app.ini`
;;   - If any of the above are relative paths then they are made absolute against the directory of the _`CustomPath`_
;;
;; In addition there is _`StaticRootPath`_ which can be set as a built-in at build time, but will otherwise default to _`AppWorkPath`_

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; General Settings
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; App name that shows in every page title
APP_NAME = ; Gitea: Git with a cup of tea
;;
;; RUN_USER will automatically detect the current user - but you can set it here change it if you run locally
RUN_USER = ; git
;;
;; Application run mode, affects performance and debugging: "dev" or "prod", default is "prod"
;; Mode "dev" makes Gitea easier to develop and debug, values other than "dev" are treated as "prod" which is for production use.
;RUN_MODE = prod
;;
;; The working directory, see the comment of AppWorkPath above
;WORK_PATH =

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[server]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; The protocol the server listens on. One of 'http', 'https', 'http+unix', 'fcgi' or 'fcgi+unix'. Defaults to 'http'
;PROTOCOL = http
;;
;; Expect PROXY protocol headers on connections
;USE_PROXY_PROTOCOL = false
;;
;; Use PROXY protocol in TLS Bridging mode
;PROXY_PROTOCOL_TLS_BRIDGING = false
;;
; Timeout to wait for PROXY protocol header (set to 0 to have no timeout)
;PROXY_PROTOCOL_HEADER_TIMEOUT=5s
;;
; Accept PROXY protocol headers with UNKNOWN type
;PROXY_PROTOCOL_ACCEPT_UNKNOWN=false
;;
;; Set the domain for the server
;DOMAIN = localhost
;;
;; Overwrite the automatically generated public URL. Necessary for proxies and docker.
;ROOT_URL = %(PROTOCOL)s://%(DOMAIN)s:%(HTTP_PORT)s/
;;
;; when STATIC_URL_PREFIX is empty it will follow ROOT_URL
;STATIC_URL_PREFIX =
;;
;; The address to listen on. Either a IPv4/IPv6 address or the path to a unix socket.
;; If PROTOCOL is set to `http+unix` or `fcgi+unix`, this should be the name of the Unix socket file to use.
;; Relative paths will be made absolute against the _`AppWorkPath`_.
;HTTP_ADDR = 0.0.0.0
;;
;; The port to listen on. Leave empty when using a unix socket.
;HTTP_PORT = 3000
;;
;; If REDIRECT_OTHER_PORT is true, and PROTOCOL is set to https an http server
;; will be started on PORT_TO_REDIRECT and it will redirect plain, non-secure http requests to the main
;; ROOT_URL.  Defaults are false for REDIRECT_OTHER_PORT and 80 for
;; PORT_TO_REDIRECT.
;REDIRECT_OTHER_PORT = false
;PORT_TO_REDIRECT = 80
;;
;; expect PROXY protocol header on connections to https redirector.
;REDIRECTOR_USE_PROXY_PROTOCOL = %(USE_PROXY_PROTOCOL)s
;; Minimum and maximum supported TLS versions
;SSL_MIN_VERSION=TLSv1.2
;SSL_MAX_VERSION=
;;
;; SSL Curve Preferences
;SSL_CURVE_PREFERENCES=X25519,P256
;;
;; SSL Cipher Suites
;SSL_CIPHER_SUITES=; Will default to "ecdhe_ecdsa_with_aes_256_gcm_sha384,ecdhe_rsa_with_aes_256_gcm_sha384,ecdhe_ecdsa_with_aes_128_gcm_sha256,ecdhe_rsa_with_aes_128_gcm_sha256,ecdhe_ecdsa_with_chacha20_poly1305,ecdhe_rsa_with_chacha20_poly1305" if aes is supported by hardware, otherwise chacha will be first.
;;
;; Timeout for any write to the connection. (Set to -1 to disable all timeouts.)
;PER_WRITE_TIMEOUT = 30s
;;
;; Timeout per Kb written to connections.
;PER_WRITE_PER_KB_TIMEOUT = 30s
;;
;; Permission for unix socket
;UNIX_SOCKET_PERMISSION = 666
;;
;; Local (DMZ) URL for Gitea workers (such as SSH update) accessing web service.
;; In most cases you do not need to change the default value.
;; Alter it only if your SSH server node is not the same as HTTP node.
;; Do not set this variable if PROTOCOL is set to 'unix'.
;LOCAL_ROOT_URL = %(PROTOCOL)s://%(HTTP_ADDR)s:%(HTTP_PORT)s/
;;
;; When making local connections pass the PROXY protocol header.
;LOCAL_USE_PROXY_PROTOCOL = %(USE_PROXY_PROTOCOL)s
;;
;; Disable SSH feature when not available
;DISABLE_SSH = false
;;
;; Whether to use the builtin SSH server or not.
;START_SSH_SERVER = false
;;
;; Expect PROXY protocol header on connections to the built-in SSH server
;SSH_SERVER_USE_PROXY_PROTOCOL = false
;;
;; Username to use for the builtin SSH server. If blank, then it is the value of RUN_USER.
;BUILTIN_SSH_SERVER_USER = %(RUN_USER)s
;;
;; Domain name to be exposed in clone URL
;SSH_DOMAIN = %(DOMAIN)s
;;
;; SSH username displayed in clone URLs.
;SSH_USER = %(BUILTIN_SSH_SERVER_USER)s
;;
;; The network interface the builtin SSH server should listen on
;SSH_LISTEN_HOST =
;;
;; Port number to be exposed in clone URL
;SSH_PORT = 22
;;
;; The port number the builtin SSH server should listen on
;SSH_LISTEN_PORT = %(SSH_PORT)s
;;
;; Root path of SSH directory, default is '~/.ssh', but you have to use '/home/git/.ssh'.
;SSH_ROOT_PATH =
;;
;; Gitea will create a authorized_keys file by default when it is not using the internal ssh server
;; If you intend to use the AuthorizedKeysCommand functionality then you should turn this off.
;SSH_CREATE_AUTHORIZED_KEYS_FILE = true
;;
;; Gitea will create a authorized_principals file by default when it is not using the internal ssh server
;; If you intend to use the AuthorizedPrincipalsCommand functionality then you should turn this off.
;SSH_CREATE_AUTHORIZED_PRINCIPALS_FILE = true
;;
;; For the built-in SSH server, choose the ciphers to support for SSH connections,
;; for system SSH this setting has no effect
;SSH_SERVER_CIPHERS = chacha20-poly1305@openssh.com, aes128-ctr, aes192-ctr, aes256-ctr, aes128-gcm@openssh.com, aes256-gcm@openssh.com
;;
;; For the built-in SSH server, choose the key exchange algorithms to support for SSH connections,
;; for system SSH this setting has no effect
;SSH_SERVER_KEY_EXCHANGES = curve25519-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, diffie-hellman-group14-sha256, diffie-hellman-group14-sha1
;;
;; For the built-in SSH server, choose the MACs to support for SSH connections,
;; for system SSH this setting has no effect
;SSH_SERVER_MACS = hmac-sha2-256-etm@openssh.com, hmac-sha2-256, hmac-sha1
;;
;; For the built-in SSH server, choose the keypair to offer as the host key
;; The private key should be at SSH_SERVER_HOST_KEY and the public SSH_SERVER_HOST_KEY.pub
;; relative paths are made absolute relative to the %(APP_DATA_PATH)s
;SSH_SERVER_HOST_KEYS=ssh/gitea.rsa, ssh/gogs.rsa
;;
;; Directory to create temporary files in when testing public keys using ssh-keygen,
;; default is the system temporary directory.
;SSH_KEY_TEST_PATH =
;;
;; Use `ssh-keygen` to parse public SSH keys. The value is passed to the shell. By default, Gitea does the parsing itself.
;SSH_KEYGEN_PATH =
;;
;; Enable SSH Authorized Key Backup when rewriting all keys, default is true
;SSH_AUTHORIZED_KEYS_BACKUP = true
;;
;; Determines which principals to allow
;; - empty: if SSH_TRUSTED_USER_CA_KEYS is empty this will default to off, otherwise will default to email, username.
;; - off: Do not allow authorized principals
;; - email: the principal must match the user's email
;; - username: the principal must match the user's username
;; - anything: there will be no checking on the content of the principal
;SSH_AUTHORIZED_PRINCIPALS_ALLOW = email, username
;;
;; Enable SSH Authorized Principals Backup when rewriting all keys, default is true
;SSH_AUTHORIZED_PRINCIPALS_BACKUP = true
;;
;; Specifies the public keys of certificate authorities that are trusted to sign user certificates for authentication.
;; Multiple keys should be comma separated.
;; E.g."ssh-<algorithm> <key>". or "ssh-<algorithm> <key1>, ssh-<algorithm> <key2>".
;; For more information see "TrustedUserCAKeys" in the sshd config manpages.
;SSH_TRUSTED_USER_CA_KEYS =
;; Absolute path of the `TrustedUserCaKeys` file gitea will manage.
;; Default this `RUN_USER`/.ssh/gitea-trusted-user-ca-keys.pem
;; If you're running your own ssh server and you want to use the gitea managed file you'll also need to modify your
;; sshd_config to point to this file. The official docker image will automatically work without further configuration.
;SSH_TRUSTED_USER_CA_KEYS_FILENAME =
;;
;; Enable exposure of SSH clone URL to anonymous visitors, default is false
;SSH_EXPOSE_ANONYMOUS = false
;;
;; Timeout for any write to ssh connections. (Set to -1 to disable all timeouts.)
;; Will default to the PER_WRITE_TIMEOUT.
;SSH_PER_WRITE_TIMEOUT = 30s
;;
;; Timeout per Kb written to ssh connections.
;; Will default to the PER_WRITE_PER_KB_TIMEOUT.
;SSH_PER_WRITE_PER_KB_TIMEOUT = 30s
;;
;; Indicate whether to check minimum key size with corresponding type
;MINIMUM_KEY_SIZE_CHECK = false
;;
;; Disable CDN even in "prod" mode
;OFFLINE_MODE = false
;;
;; TLS Settings: Either ACME or manual
;; (Other common TLS configuration are found before)
;ENABLE_ACME = false
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; ACME automatic TLS settings
;;
;; ACME directory URL (e.g. LetsEncrypt's staging/testing URL: https://acme-staging-v02.api.letsencrypt.org/directory)
;; Leave empty to default to LetsEncrypt's (production) URL
;ACME_URL =
;;
;; Explicitly accept the ACME's TOS. The specific TOS cannot be retrieved at the moment.
;ACME_ACCEPTTOS = false
;;
;; If the ACME CA is not in your system's CA trust chain, it can be manually added here
;ACME_CA_ROOT =
;;
;; Email used for the ACME registration service
;; Can be left blank to initialize at first run and use the cached value
;ACME_EMAIL =
;;
;; ACME live directory (not to be confused with ACME directory URL: ACME_URL)
;; (Refer to caddy's ACME manager https://github.com/caddyserver/certmagic)
;ACME_DIRECTORY = https
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;  Manual TLS settings: (Only applicable if ENABLE_ACME=false)
;;
;; Generate steps:
;; $ ./gitea cert -ca=true -duration=8760h0m0s -host=myhost.example.com
;;
;; Or from a .pfx file exported from the Windows certificate store (do
;; not forget to export the private key):
;; $ openssl pkcs12 -in cert.pfx -out cert.pem -nokeys
;; $ openssl pkcs12 -in cert.pfx -out key.pem -nocerts -nodes
;; Paths are relative to CUSTOM_PATH
;CERT_FILE = https/cert.pem
;KEY_FILE = https/key.pem
;;
;; Root directory containing templates and static files.
;; default is the path where Gitea is executed
;STATIC_ROOT_PATH = ; Will default to the built-in value _`StaticRootPath`_
;;
;; Default path for App data
;APP_DATA_PATH = data ; relative paths will be made absolute with _`AppWorkPath`_
;;
;; Enable gzip compression for runtime-generated content, static resources excluded
;ENABLE_GZIP = false
;;
;; Application profiling (memory and cpu)
;; For "web" command it listens on localhost:6060
;; For "serve" command it dumps to disk at PPROF_DATA_PATH as (cpuprofile|memprofile)_<username>_<temporary id>
;ENABLE_PPROF = false
;;
;; PPROF_DATA_PATH, use an absolute path when you start gitea as service
;PPROF_DATA_PATH = data/tmp/pprof ; Path is relative to _`AppWorkPath`_
;;
;; Landing page, can be "home", "explore", "organizations", "login", or any URL such as "/org/repo" or even "https://anotherwebsite.com"
;; The "login" choice is not a security measure but just a UI flow change, use REQUIRE_SIGNIN_VIEW to force users to log in.
;LANDING_PAGE = home
;;
;; Enables git-lfs support. true or false, default is false.
;LFS_START_SERVER = false
;;
;;
;; LFS authentication secret, change this yourself
LFS_JWT_SECRET =
;;
;; LFS authentication validity period (in time.Duration), pushes taking longer than this may fail.
;LFS_HTTP_AUTH_EXPIRY = 24h
;;
;; Maximum allowed LFS file size in bytes (Set to 0 for no limit).
;LFS_MAX_FILE_SIZE = 0
;;
;; Maximum number of locks returned per page
;LFS_LOCKS_PAGING_NUM = 50
;;
;; Allow graceful restarts using SIGHUP to fork
;ALLOW_GRACEFUL_RESTARTS = true
;;
;; After a restart the parent will finish ongoing requests before
;; shutting down. Force shutdown if this process takes longer than this delay.
;; set to a negative value to disable
;GRACEFUL_HAMMER_TIME = 60s
;;
;; Allows the setting of a startup timeout and waithint for Windows as SVC service
;; 0 disables this.
;STARTUP_TIMEOUT = 0
;;
;; Static resources, includes resources on custom/, public/ and all uploaded avatars web browser cache time. Note that this cache is disabled when RUN_MODE is "dev". Default is 6h
;STATIC_CACHE_TIME = 6h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[database]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Database to use. Either "mysql", "postgres", "mssql" or "sqlite3".
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; MySQL Configuration
;;
DB_TYPE = mysql
HOST = 127.0.0.1:3306 ; can use socket e.g. /var/run/mysqld/mysqld.sock
NAME = gitea
USER = root
;PASSWD = ;Use PASSWD = `your password` for quoting if you use special characters in the password.
;SSL_MODE = false ; either "false" (default), "true", or "skip-verify"
;CHARSET = utf8mb4 ;either "utf8" or "utf8mb4", default is "utf8mb4".
;;
;; NOTICE: for "utf8mb4" you must use MySQL InnoDB > 5.6. Gitea is unable to check this.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Postgres Configuration
;;
;DB_TYPE = postgres
;HOST = 127.0.0.1:5432 ; can use socket e.g. /var/run/postgresql/
;NAME = gitea
;USER = root
;PASSWD =
;SCHEMA =
;SSL_MODE=disable ;either "disable" (default), "require", or "verify-full"
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; SQLite Configuration
;;
;DB_TYPE = sqlite3
;PATH= ; defaults to data/gitea.db
;SQLITE_TIMEOUT = ; Query timeout defaults to: 500
;SQLITE_JOURNAL_MODE = ; defaults to sqlite database default (often DELETE), can be used to enable WAL mode. https://www.sqlite.org/pragma.html#pragma_journal_mode
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; MSSQL Configuration
;;
;DB_TYPE = mssql
;HOST = 172.17.0.2:1433
;NAME = gitea
;USER = SA
;PASSWD = MwantsaSecurePassword1
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Other settings
;;
;; For iterate buffer, default is 50
;ITERATE_BUFFER_SIZE = 50
;;
;; Show the database generated SQL
;LOG_SQL = false
;;
;; Maximum number of DB Connect retries
;DB_RETRIES = 10
;;
;; Backoff time per DB retry (time.Duration)
;DB_RETRY_BACKOFF = 3s
;;
;; Max idle database connections on connection pool, default is 2
;MAX_IDLE_CONNS = 2
;;
;; Database connection max life time, default is 0 or 3s mysql (See #6804 & #7071 for reasoning)
;CONN_MAX_LIFETIME = 3s
;;
;; Database maximum number of open connections, default is 0 meaning no maximum
;MAX_OPEN_CONNS = 0
;;
;; Whether execute database models migrations automatically
;AUTO_MIGRATION = true

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[security]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Whether the installer is disabled (set to true to disable the installer)
INSTALL_LOCK = false
;;
;; Global secret key that will be used
;; This key is VERY IMPORTANT. If you lose it, the data encrypted by it (like 2FA secret) can't be decrypted anymore.
SECRET_KEY =
;;
;; Alternative location to specify secret key, instead of this file; you cannot specify both this and SECRET_KEY, and must pick one
;; This key is VERY IMPORTANT. If you lose it, the data encrypted by it (like 2FA secret) can't be decrypted anymore.
;SECRET_KEY_URI = file:/etc/gitea/secret_key
;;
;; Secret used to validate communication within Gitea binary.
INTERNAL_TOKEN=
;;
;; Alternative location to specify internal token, instead of this file; you cannot specify both this and INTERNAL_TOKEN, and must pick one
;INTERNAL_TOKEN_URI = file:/etc/gitea/internal_token
;;
;; How long to remember that a user is logged in before requiring relogin (in days)
;LOGIN_REMEMBER_DAYS = 7
;;
;; Name of the cookie used to store the current username.
;COOKIE_USERNAME = gitea_awesome
;;
;; Name of cookie used to store authentication information.
;COOKIE_REMEMBER_NAME = gitea_incredible
;;
;; Reverse proxy authentication header name of user name, email, and full name
;REVERSE_PROXY_AUTHENTICATION_USER = X-WEBAUTH-USER
;REVERSE_PROXY_AUTHENTICATION_EMAIL = X-WEBAUTH-EMAIL
;REVERSE_PROXY_AUTHENTICATION_FULL_NAME = X-WEBAUTH-FULLNAME
;;
;; Interpret X-Forwarded-For header or the X-Real-IP header and set this as the remote IP for the request
;REVERSE_PROXY_LIMIT = 1
;;
;; List of IP addresses and networks separated by comma of trusted proxy servers. Use `*` to trust all.
;REVERSE_PROXY_TRUSTED_PROXIES = 127.0.0.0/8,::1/128
;;
;; The minimum password length for new Users
;MIN_PASSWORD_LENGTH = 6
;;
;; Set to true to allow users to import local server paths
;IMPORT_LOCAL_PATHS = false
;;
;; Set to false to allow users with git hook privileges to create custom git hooks.
;; Custom git hooks can be used to perform arbitrary code execution on the host operating system.
;; This enables the users to access and modify this config file and the Gitea database and interrupt the Gitea service.
;; By modifying the Gitea database, users can gain Gitea administrator privileges.
;; It also enables them to access other resources available to the user on the operating system that is running the Gitea instance and perform arbitrary actions in the name of the Gitea OS user.
;; WARNING: This maybe harmful to you website or your operating system.
;; WARNING: Setting this to true does not change existing hooks in git repos; adjust it before if necessary.
;DISABLE_GIT_HOOKS = true
;;
;; Set to true to disable webhooks feature.
;DISABLE_WEBHOOKS = false
;;
;; Set to false to allow pushes to gitea repositories despite having an incomplete environment - NOT RECOMMENDED
;ONLY_ALLOW_PUSH_IF_GITEA_ENVIRONMENT_SET = true
;;
;;Comma separated list of character classes required to pass minimum complexity.
;;If left empty or no valid values are specified, the default is off (no checking)
;;Classes include "lower,upper,digit,spec"
;PASSWORD_COMPLEXITY = off
;;
;; Password Hash algorithm, either "argon2", "pbkdf2", "scrypt" or "bcrypt"
;PASSWORD_HASH_ALGO = pbkdf2
;;
;; Set false to allow JavaScript to read CSRF cookie
;CSRF_COOKIE_HTTP_ONLY = true
;;
;; Validate against https://haveibeenpwned.com/Passwords to see if a password has been exposed
;PASSWORD_CHECK_PWN = false
;;
;; Cache successful token hashes. API tokens are stored in the DB as pbkdf2 hashes however, this means that there is a potentially significant hashing load when there are multiple API operations.
;; This cache will store the successfully hashed tokens in a LRU cache as a balance between performance and security.
;SUCCESSFUL_TOKENS_CACHE_SIZE = 20

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[camo]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; At the moment we only support images
;;
;; if the camo is enabled
;ENABLED = false
;; url to a camo image proxy, it **is required** if camo is enabled.
;SERVER_URL =
;; HMAC to encode urls with, it **is required** if camo is enabled.
;HMAC_KEY =
;; Set to true to use camo for https too lese only non https urls are proxyed
;ALLWAYS = false

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[oauth2]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Enables OAuth2 provider
ENABLE = true
;;
;; Algorithm used to sign OAuth2 tokens. Valid values: HS256, HS384, HS512, RS256, RS384, RS512, ES256, ES384, ES512, EdDSA
;JWT_SIGNING_ALGORITHM = RS256
;;
;; Private key file path used to sign OAuth2 tokens. The path is relative to APP_DATA_PATH.
;; This setting is only needed if JWT_SIGNING_ALGORITHM is set to RS256, RS384, RS512, ES256, ES384 or ES512.
;; The file must contain a RSA or ECDSA private key in the PKCS8 format. If no key exists a 4096 bit key will be created for you.
;JWT_SIGNING_PRIVATE_KEY_FILE = jwt/private.pem
;;
;; OAuth2 authentication secret for access and refresh tokens, change this yourself to a unique string. CLI generate option is helpful in this case. https://docs.gitea.io/en-us/command-line/#generate
;; This setting is only needed if JWT_SIGNING_ALGORITHM is set to HS256, HS384 or HS512.
;JWT_SECRET =
;;
;; Lifetime of an OAuth2 access token in seconds
;ACCESS_TOKEN_EXPIRATION_TIME = 3600
;;
;; Lifetime of an OAuth2 refresh token in hours
;REFRESH_TOKEN_EXPIRATION_TIME = 730
;;
;; Check if refresh token got already used
;INVALIDATE_REFRESH_TOKENS = false
;;
;; Maximum length of oauth2 token/cookie stored on server
;MAX_TOKEN_LENGTH = 32767

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[log]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Root path for the log files - defaults to %(GITEA_WORK_DIR)/log
;ROOT_PATH =
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Main Logger
;;
;; Either "console", "file" or "conn", default is "console"
;; Use comma to separate multiple modes, e.g. "console, file"
MODE = console
;;
;; Either "Trace", "Debug", "Info", "Warn", "Error" or "None", default is "Info"
LEVEL = Info
;;
;; Print Stacktrace with logs (rarely helpful, do not set) Either "Trace", "Debug", "Info", "Warn", "Error", default is "None"
;STACKTRACE_LEVEL = None
;;
;; Buffer length of the channel, keep it as it is if you don't know what it is.
;BUFFER_LEN = 10000
;;
;; Sub logger modes, a single comma means use default MODE above, empty means disable it
;logger.access.MODE=
;logger.router.MODE=,
;logger.xorm.MODE=,
;;
;; Collect SSH logs (Creates log from ssh git request)
;;
;ENABLE_SSH_LOG = false
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Access Logger (Creates log in NCSA common log format)
;;
;; Print request id which parsed from request headers in access log, when access log is enabled.
;; * E.g:
;; * In request Header:         X-Request-ID: test-id-123
;; * Configuration in app.ini:  REQUEST_ID_HEADERS = X-Request-ID
;; * Print in log:              127.0.0.1:58384 - - [14/Feb/2023:16:33:51 +0800] "test-id-123"
;;
;; If you configure more than one in the .ini file, it will match in the order of configuration,
;; and the first match will be finally printed in the log.
;; * E.g:
;; * In request Header:         X-Trace-ID: trace-id-1q2w3e4r
;; * Configuration in app.ini:  REQUEST_ID_HEADERS = X-Request-ID, X-Trace-ID, X-Req-ID
;; * Print in log:              127.0.0.1:58384 - - [14/Feb/2023:16:33:51 +0800] "trace-id-1q2w3e4r"
;;
;REQUEST_ID_HEADERS =
;;
;; Sets the template used to create the access log.
;ACCESS_LOG_TEMPLATE = {{.Ctx.RemoteHost}} - {{.Identity}} {{.Start.Format "[02/Jan/2006:15:04:05 -0700]" }} "{{.Ctx.Req.Method}} {{.Ctx.Req.URL.RequestURI}} {{.Ctx.Req.Proto}}" {{.ResponseWriter.Status}} {{.ResponseWriter.Size}} "{{.Ctx.Req.Referer}}" "{{.Ctx.Req.UserAgent}}"

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Log modes (aka log writers)
;;
;[log.%(WriterMode)]
;MODE=console/file/conn/...
;LEVEL=
;FLAGS = stdflags
;EXPRESSION =
;PREFIX =
;COLORIZE = false
;;
;[log.console]
;STDERR = false
;;
;[log.file]
;; Set the file_name for the logger. If this is a relative path this will be relative to ROOT_PATH
;FILE_NAME =
;; This enables automated log rotate(switch of following options), default is true
;LOG_ROTATE = true
;; Max size shift of a single file, default is 28 means 1 << 28, 256MB
;MAX_SIZE_SHIFT = 28
;; Segment log daily, default is true
;DAILY_ROTATE = true
;; delete the log file after n days, default is 7
;MAX_DAYS = 7
;; compress logs with gzip
;COMPRESS = true
;; compression level see godoc for compress/gzip
;COMPRESSION_LEVEL = -1
;;
;[log.conn]
;; Reconnect host for every single message, default is false
;RECONNECT_ON_MSG = false
;; Try to reconnect when connection is lost, default is false
;RECONNECT = false
;; Either "tcp", "unix" or "udp", default is "tcp"
;PROTOCOL = tcp
;; Host address
;ADDR =

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[git]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; The path of git executable. If empty, Gitea searches through the PATH environment.
;PATH =
;;
;; The HOME directory for Git
;HOME_PATH = %(APP_DATA_PATH)s/home
;;
;; Disables highlight of added and removed changes
;DISABLE_DIFF_HIGHLIGHT = false
;;
;; Max number of lines allowed in a single file in diff view
;MAX_GIT_DIFF_LINES = 1000
;;
;; Max number of allowed characters in a line in diff view
;MAX_GIT_DIFF_LINE_CHARACTERS = 5000
;;
;; Max number of files shown in diff view
;MAX_GIT_DIFF_FILES = 100
;;
;; Set the default commits range size
;COMMITS_RANGE_SIZE = 50
;;
;; Set the default branches range size
;BRANCHES_RANGE_SIZE = 20
;;
;; Arguments for command 'git gc', e.g. "--aggressive --auto"
;; see more on http://git-scm.com/docs/git-gc/
;GC_ARGS =
;;
;; If use git wire protocol version 2 when git version >= 2.18, default is true, set to false when you always want git wire protocol version 1
;; To enable this for Git over SSH when using a OpenSSH server, add `AcceptEnv GIT_PROTOCOL` to your sshd_config file.
;ENABLE_AUTO_GIT_WIRE_PROTOCOL = true
;;
;; Respond to pushes to a non-default branch with a URL for creating a Pull Request (if the repository has them enabled)
;PULL_REQUEST_PUSH_MESSAGE = true
;;
;; (Go-Git only) Don't cache objects greater than this in memory. (Set to 0 to disable.)
;LARGE_OBJECT_THRESHOLD = 1048576
;; Set to true to forcibly set core.protectNTFS=false
;DISABLE_CORE_PROTECT_NTFS=false
;; Disable the usage of using partial clones for git.
;DISABLE_PARTIAL_CLONE = false

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Git Operation timeout in seconds
;[git.timeout]
;DEFAULT = 360
;MIGRATE = 600
;MIRROR = 300
;CLONE = 300
;PULL = 300
;GC = 60

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Git config options
;; This section only does "set" config, a removed config key from this section won't be removed from git config automatically. The format is `some.configKey = value`.
;[git.config]
;diff.algorithm = histogram
;core.logAllRefUpdates = true
;gc.reflogExpire = 90

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[service]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Time limit to confirm account/email registration
;ACTIVE_CODE_LIVE_MINUTES = 180
;;
;; Time limit to perform the reset of a forgotten password
;RESET_PASSWD_CODE_LIVE_MINUTES = 180
;;
;; Whether a new user needs to confirm their email when registering.
;REGISTER_EMAIL_CONFIRM = false
;;
;; Whether a new user needs to be confirmed manually after registration. (Requires `REGISTER_EMAIL_CONFIRM` to be disabled.)
;REGISTER_MANUAL_CONFIRM = false
;;
;; List of domain names that are allowed to be used to register on a Gitea instance, wildcard is supported
;; eg: gitea.io,example.com,*.mydomain.com
;EMAIL_DOMAIN_ALLOWLIST =
;;
;; Comma-separated list of domain names that are not allowed to be used to register on a Gitea instance, wildcard is supported
;EMAIL_DOMAIN_BLOCKLIST =
;;
;; Disallow registration, only allow admins to create accounts.
;DISABLE_REGISTRATION = false
;;
;; Allow registration only using gitea itself, it works only when DISABLE_REGISTRATION is false
;ALLOW_ONLY_INTERNAL_REGISTRATION = false
;;
;; Allow registration only using third-party services, it works only when DISABLE_REGISTRATION is false
;ALLOW_ONLY_EXTERNAL_REGISTRATION = false
;;
;; User must sign in to view anything.
;REQUIRE_SIGNIN_VIEW = false
;;
;; Mail notification
;ENABLE_NOTIFY_MAIL = false
;;
;; This setting enables gitea to be signed in with HTTP BASIC Authentication using the user's password
;; If you set this to false you will not be able to access the tokens endpoints on the API with your password
;; Please note that setting this to false will not disable OAuth Basic or Basic authentication using a token
;ENABLE_BASIC_AUTHENTICATION = true
;;
;; More detail: https://github.com/gogits/gogs/issues/165
;ENABLE_REVERSE_PROXY_AUTHENTICATION = false
;ENABLE_REVERSE_PROXY_AUTO_REGISTRATION = false
;ENABLE_REVERSE_PROXY_EMAIL = false
;ENABLE_REVERSE_PROXY_FULL_NAME = false
;;
;; Enable captcha validation for registration
;ENABLE_CAPTCHA = false
;;
;; Enable this to require captcha validation for login
;REQUIRE_CAPTCHA_FOR_LOGIN = false
;;
;; Type of captcha you want to use. Options: image, recaptcha, hcaptcha, mcaptcha, cfturnstile.
;CAPTCHA_TYPE = image
;;
;; Change this to use recaptcha.net or other recaptcha service
;RECAPTCHA_URL = https://www.google.com/recaptcha/
;; Enable recaptcha to use Google's recaptcha service
;; Go to https://www.google.com/recaptcha/admin to sign up for a key
;RECAPTCHA_SECRET =
;RECAPTCHA_SITEKEY =
;;
;; For hCaptcha, create an account at https://accounts.hcaptcha.com/login to get your keys
;HCAPTCHA_SECRET =
;HCAPTCHA_SITEKEY =
;;
;; Change this to use demo.mcaptcha.org or your self-hosted mcaptcha.org instance.
;MCAPTCHA_URL = https://demo.mcaptcha.org
;;
;; Go to your configured mCaptcha instance and register a sitekey
;; and use your account's secret.
;MCAPTCHA_SECRET =
;MCAPTCHA_SITEKEY =
;;
;; Go to https://dash.cloudflare.com/?to=/:account/turnstile to sign up for a key
;CF_TURNSTILE_SITEKEY =
;CF_TURNSTILE_SECRET =
;;
;; Default value for KeepEmailPrivate
;; Each new user will get the value of this setting copied into their profile
;DEFAULT_KEEP_EMAIL_PRIVATE = false
;;
;; Default value for AllowCreateOrganization
;; Every new user will have rights set to create organizations depending on this setting
;DEFAULT_ALLOW_CREATE_ORGANIZATION = true
;; Default value for IsRestricted
;; Every new user will have restricted permissions depending on this setting
;DEFAULT_USER_IS_RESTRICTED = false
;;
;; Either "public", "limited" or "private", default is "public"
;; Limited is for users visible only to signed users
;; Private is for users visible only to members of their organizations
;; Public is for users visible for everyone
;DEFAULT_USER_VISIBILITY = public
;;
;; Set which visibility modes a user can have
;ALLOWED_USER_VISIBILITY_MODES = public,limited,private
;;
;; Either "public", "limited" or "private", default is "public"
;; Limited is for organizations visible only to signed users
;; Private is for organizations visible only to members of the organization
;; Public is for organizations visible to everyone
;DEFAULT_ORG_VISIBILITY = public
;;
;; Default value for DefaultOrgMemberVisible
;; True will make the membership of the users visible when added to the organisation
;DEFAULT_ORG_MEMBER_VISIBLE = false
;;
;; Default value for EnableDependencies
;; Repositories will use dependencies by default depending on this setting
;DEFAULT_ENABLE_DEPENDENCIES = true
;;
;; Dependencies can be added from any repository where the user is granted access or only from the current repository depending on this setting.
;ALLOW_CROSS_REPOSITORY_DEPENDENCIES = true
;;
;; Enable heatmap on users profiles.
;ENABLE_USER_HEATMAP = true
;;
;; Enable Timetracking
;ENABLE_TIMETRACKING = true
;;
;; Default value for EnableTimetracking
;; Repositories will use timetracking by default depending on this setting
;DEFAULT_ENABLE_TIMETRACKING = true
;;
;; Default value for AllowOnlyContributorsToTrackTime
;; Only users with write permissions can track time if this is true
;DEFAULT_ALLOW_ONLY_CONTRIBUTORS_TO_TRACK_TIME = true
;;
;; Value for the domain part of the user's email address in the git log if user
;; has set KeepEmailPrivate to true. The user's email will be replaced with a
;; concatenation of the user name in lower case, "@" and NO_REPLY_ADDRESS. Default
;; value is "noreply." + DOMAIN, where DOMAIN resolves to the value from server.DOMAIN
;; Note: do not use the <DOMAIN> notation below
;NO_REPLY_ADDRESS = ; noreply.<DOMAIN>
;;
;; Show Registration button
;SHOW_REGISTRATION_BUTTON = true
;;
;; Show milestones dashboard page - a view of all the user's milestones
;SHOW_MILESTONES_DASHBOARD_PAGE = true
;;
;; Default value for AutoWatchNewRepos
;; When adding a repo to a team or creating a new repo all team members will watch the
;; repo automatically if enabled
;AUTO_WATCH_NEW_REPOS = true
;;
;; Default value for AutoWatchOnChanges
;; Make the user watch a repository When they commit for the first time
;AUTO_WATCH_ON_CHANGES = false
;;
;; Minimum amount of time a user must exist before comments are kept when the user is deleted.
;USER_DELETE_WITH_COMMENTS_MAX_TIME = 0
;; Valid site url schemes for user profiles
;VALID_SITE_URL_SCHEMES=http,https


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Other Settings
;;
;; Uncomment the [section.header] if you wish to
;; set the below settings.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Root path for storing all repository data. By default, it is set to %(APP_DATA_PATH)s/gitea-repositories.
;; A relative path is interpreted as _`AppWorkPath`_/%(ROOT)s
;ROOT =
;;
;; The script type this server supports. Usually this is `bash`, but some users report that only `sh` is available.
;SCRIPT_TYPE = bash
;;
;; DETECTED_CHARSETS_ORDER tie-break order for detected charsets.
;; If the charsets have equal confidence, tie-breaking will be done by order in this list
;; with charsets earlier in the list chosen in preference to those later.
;; Adding "defaults" will place the unused charsets at that position.
;DETECTED_CHARSETS_ORDER = UTF-8, UTF-16BE, UTF-16LE, UTF-32BE, UTF-32LE, ISO-8859, windows-1252, ISO-8859, windows-1250, ISO-8859, ISO-8859, ISO-8859, windows-1253, ISO-8859, windows-1255, ISO-8859, windows-1251, windows-1256, KOI8-R, ISO-8859, windows-1254, Shift_JIS, GB18030, EUC-JP, EUC-KR, Big5, ISO-2022, ISO-2022, ISO-2022, IBM424_rtl, IBM424_ltr, IBM420_rtl, IBM420_ltr
;;
;; Default ANSI charset to override non-UTF-8 charsets to
;ANSI_CHARSET =
;;
;; Force every new repository to be private
;FORCE_PRIVATE = false
;;
;; Default privacy setting when creating a new repository, allowed values: last, private, public. Default is last which means the last setting used.
;DEFAULT_PRIVATE = last
;;
;; Default private when using push-to-create
;DEFAULT_PUSH_CREATE_PRIVATE = true
;;
;; Global limit of repositories per user, applied at creation time. -1 means no limit
;MAX_CREATION_LIMIT = -1
;;
;; Preferred Licenses to place at the top of the List
;; The name here must match the filename in options/license or custom/options/license
;PREFERRED_LICENSES = Apache License 2.0,MIT License
;;
;; Disable the ability to interact with repositories using the HTTP protocol
;DISABLE_HTTP_GIT = false
;;
;; Value for Access-Control-Allow-Origin header, default is not to present
;; WARNING: This may be harmful to your website if you do not give it a right value.
;ACCESS_CONTROL_ALLOW_ORIGIN =
;;
;; Force ssh:// clone url instead of scp-style uri when default SSH port is used
;USE_COMPAT_SSH_URI = false
;;
;; Value for the "go get" request returns the repository url as https or ssh, default is https
;GO_GET_CLONE_URL_PROTOCOL = https
;;
;; Close issues as long as a commit on any branch marks it as fixed
;; Comma separated list of globally disabled repo units. Allowed values: repo.issues, repo.ext_issues, repo.pulls, repo.wiki, repo.ext_wiki, repo.projects, repo.packages, repo.actions.
;DISABLED_REPO_UNITS =
;;
;; Comma separated list of default new repo units. Allowed values: repo.code, repo.releases, repo.issues, repo.pulls, repo.wiki, repo.projects, repo.packages, repo.actions.
;; Note: Code and Releases can currently not be deactivated. If you specify default repo units you should still list them for future compatibility.
;; External wiki and issue tracker can't be enabled by default as it requires additional settings.
;; Disabled repo units will not be added to new repositories regardless if it is in the default list.
;DEFAULT_REPO_UNITS = repo.code,repo.releases,repo.issues,repo.pulls,repo.wiki,repo.projects,repo.packages
;;
;; Comma separated list of default forked repo units.
;; The set of allowed values and rules are the same as DEFAULT_REPO_UNITS.
;DEFAULT_FORK_REPO_UNITS = repo.code,repo.pulls
;;
;; Prefix archive files by placing them in a directory named after the repository
;PREFIX_ARCHIVE_FILES = true
;;
;; Disable migrating feature.
;DISABLE_MIGRATIONS = false
;;
;; Disable stars feature.
;DISABLE_STARS = false
;;
;; The default branch name of new repositories
;DEFAULT_BRANCH = main
;;
;; Allow adoption of unadopted repositories
;ALLOW_ADOPTION_OF_UNADOPTED_REPOSITORIES = false
;;
;; Allow deletion of unadopted repositories
;ALLOW_DELETION_OF_UNADOPTED_REPOSITORIES = false

;; Don't allow download source archive files from UI
;DISABLE_DOWNLOAD_SOURCE_ARCHIVES = false

;; Allow fork repositories without maximum number limit
;ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT = true

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.editor]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; List of file extensions for which lines should be wrapped in the Monaco editor
;; Separate extensions with a comma. To line wrap files without an extension, just put a comma
;LINE_WRAP_EXTENSIONS = .txt,.md,.markdown,.mdown,.mkd,.livemd,

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.local]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Path for local repository copy. Defaults to `tmp/local-repo` (content gets deleted on gitea restart)
;LOCAL_COPY_PATH = tmp/local-repo

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.upload]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Whether repository file uploads are enabled. Defaults to `true`
;ENABLED = true
;;
;; Path for uploads. Defaults to `data/tmp/uploads` (content gets deleted on gitea restart)
;TEMP_PATH = data/tmp/uploads
;;
;; Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
;ALLOWED_TYPES =
;;
;; Max size of each file in megabytes. Defaults to 3MB
;FILE_MAX_SIZE = 3
;;
;; Max number of files per upload. Defaults to 5
;MAX_FILES = 5

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.pull-request]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; List of prefixes used in Pull Request title to mark them as Work In Progress (matched in a case-insensitive manner)
;WORK_IN_PROGRESS_PREFIXES = WIP:,[WIP]
;;
;; List of keywords used in Pull Request comments to automatically close a related issue
;CLOSE_KEYWORDS = close,closes,closed,fix,fixes,fixed,resolve,resolves,resolved
;;
;; List of keywords used in Pull Request comments to automatically reopen a related issue
;REOPEN_KEYWORDS = reopen,reopens,reopened
;;
;; Set default merge style for repository creating, valid options: merge, rebase, rebase-merge, squash
;DEFAULT_MERGE_STYLE = merge
;;
;; In the default merge message for squash commits include at most this many commits
;DEFAULT_MERGE_MESSAGE_COMMITS_LIMIT = 50
;;
;; In the default merge message for squash commits limit the size of the commit messages to this
;DEFAULT_MERGE_MESSAGE_SIZE = 5120
;;
;; In the default merge message for squash commits walk all commits to include all authors in the Co-authored-by otherwise just use those in the limited list
;DEFAULT_MERGE_MESSAGE_ALL_AUTHORS = false
;;
;; In default merge messages limit the number of approvers listed as Reviewed-by: to this many
;DEFAULT_MERGE_MESSAGE_MAX_APPROVERS = 10
;;
;; In default merge messages only include approvers who are official
;DEFAULT_MERGE_MESSAGE_OFFICIAL_APPROVERS_ONLY = true
;;
;; Add co-authored-by and co-committed-by trailers if committer does not match author
;ADD_CO_COMMITTER_TRAILERS = true
;;
;; In addition to testing patches using the three-way merge method, re-test conflicting patches with git apply
;TEST_CONFLICTING_PATCHES_WITH_GIT_APPLY = false

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.issue]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; List of reasons why a Pull Request or Issue can be locked
;LOCK_REASONS = Too heated,Off-topic,Resolved,Spam
;; Maximum number of pinned Issues per repo
;; Set to 0 to disable pinning Issues
;MAX_PINNED = 3

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.release]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
;ALLOWED_TYPES =
;DEFAULT_PAGING_NUM = 10

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.signing]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; GPG key to use to sign commits, Defaults to the default - that is the value of git config --get user.signingkey
;; run in the context of the RUN_USER
;; Switch to none to stop signing completely
;SIGNING_KEY = default
;;
;; If a SIGNING_KEY ID is provided and is not set to default, use the provided Name and Email address as the signer.
;; These should match a publicized name and email address for the key. (When SIGNING_KEY is default these are set to
;; the results of git config --get user.name and git config --get user.email respectively and can only be overridden
;; by setting the SIGNING_KEY ID to the correct ID.)
;SIGNING_NAME =
;SIGNING_EMAIL =
;;
;; Sets the default trust model for repositories. Options are: collaborator, committer, collaboratorcommitter
;DEFAULT_TRUST_MODEL = collaborator
;;
;; Determines when gitea should sign the initial commit when creating a repository
;; Either:
;; - never
;; - pubkey: only sign if the user has a pubkey
;; - twofa: only sign if the user has logged in with twofa
;; - always
;; options other than none and always can be combined as comma separated list
;INITIAL_COMMIT = always
;;
;; Determines when to sign for CRUD actions
;; - as above
;; - parentsigned: requires that the parent commit is signed.
;CRUD_ACTIONS = pubkey, twofa, parentsigned
;; Determines when to sign Wiki commits
;; - as above
;WIKI = never
;;
;; Determines when to sign on merges
;; - basesigned: require that the parent of commit on the base repo is signed.
;; - commitssigned: require that all the commits in the head branch are signed.
;; - approved: only sign when merging an approved pr to a protected branch
;MERGES = pubkey, twofa, basesigned, commitssigned

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[repository.mimetype_mapping]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Custom MIME type mapping for downloadable files
;.apk=application/vnd.android.package-archive

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[project]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Default templates for project boards
;PROJECT_BOARD_BASIC_KANBAN_TYPE = To Do, In Progress, Done
;PROJECT_BOARD_BUG_TRIAGE_TYPE = Needs Triage, High Priority, Low Priority, Closed

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cors]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; More information about CORS can be found here: https://developer.mozilla.org/en-US/docs/Web/HTTP/CORS#The_HTTP_response_headers
;; enable cors headers (disabled by default)
;ENABLED = false
;;
;; scheme of allowed requests
;SCHEME = http
;;
;; list of requesting domains that are allowed
;ALLOW_DOMAIN = *
;;
;; allow subdomains of headers listed above to request
;ALLOW_SUBDOMAIN = false
;;
;; list of methods allowed to request
;METHODS = GET,HEAD,POST,PUT,PATCH,DELETE,OPTIONS
;;
;; max time to cache response
;MAX_AGE = 10m
;;
;; allow request with credentials
;ALLOW_CREDENTIALS = false
;;
;; headers to permit
;HEADERS = Content-Type,User-Agent
;;
;; set X-FRAME-OPTIONS header
;X_FRAME_OPTIONS = SAMEORIGIN

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ui]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Number of repositories that are displayed on one explore page
;EXPLORE_PAGING_NUM = 20
;;
;; Number of issues that are displayed on one page
;ISSUE_PAGING_NUM = 20
;;
;; Number of maximum commits displayed in one activity feed
;FEED_MAX_COMMIT_NUM = 5
;;
;; Number of items that are displayed in home feed
;FEED_PAGING_NUM = 20
;;
;; Number of items that are displayed in a single subsitemap
;SITEMAP_PAGING_NUM = 20
;;
;; Number of maximum commits displayed in commit graph.
;GRAPH_MAX_COMMIT_NUM = 100
;;
;; Number of line of codes shown for a code comment
;CODE_COMMENT_LINES = 4
;;
;; Max size of files to be displayed (default is 8MiB)
;MAX_DISPLAY_FILE_SIZE = 8388608
;;
;; Whether the email of the user should be shown in the Explore Users page
;SHOW_USER_EMAIL = true
;;
;; Set the default theme for the Gitea install
;DEFAULT_THEME = auto
;;
;; All available themes. Allow users select personalized themes regardless of the value of `DEFAULT_THEME`.
;THEMES = auto,gitea,arc-green
;;
;; All available reactions users can choose on issues/prs and comments.
;; Values can be emoji alias (:smile:) or a unicode emoji.
;; For custom reactions, add a tightly cropped square image to public/img/emoji/reaction_name.png
;REACTIONS = +1, -1, laugh, hooray, confused, heart, rocket, eyes
;;
;; Additional Emojis not defined in the utf8 standard
;; By default we support gitea (:gitea:), to add more copy them to public/img/emoji/emoji_name.png and add it to this config.
;; Dont mistake it for Reactions.
;CUSTOM_EMOJIS = gitea, codeberg, gitlab, git, github, gogs
;;
;; Whether the full name of the users should be shown where possible. If the full name isn't set, the username will be used.
;DEFAULT_SHOW_FULL_NAME = false
;;
;; Whether to search within description at repository search on explore page.
;SEARCH_REPO_DESCRIPTION = true
;;
;; Whether to only show relevant repos on the explore page when no keyword is specified and default sorting is used.
;; A repo is considered irrelevant if it's a fork or if it has no metadata (no description, no icon, no topic).
;ONLY_SHOW_RELEVANT_REPOS = false

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ui.admin]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Number of users that are displayed on one page
;USER_PAGING_NUM = 50
;;
;; Number of repos that are displayed on one page
;REPO_PAGING_NUM = 50
;;
;; Number of notices that are displayed on one page
;NOTICE_PAGING_NUM = 25
;;
;; Number of organizations that are displayed on one page
;ORG_PAGING_NUM = 50

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ui.user]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Number of repos that are displayed on one page
;REPO_PAGING_NUM = 15

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ui.meta]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;AUTHOR = Gitea - Git with a cup of tea
;DESCRIPTION = Gitea (Git with a cup of tea) is a painless self-hosted Git service written in Go
;KEYWORDS = go,git,self-hosted,gitea

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ui.notification]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Control how often the notification endpoint is polled to update the notification
;; The timeout will increase to MAX_TIMEOUT in TIMEOUT_STEPs if the notification count is unchanged
;; Set MIN_TIMEOUT to -1 to turn off
;MIN_TIMEOUT = 10s
;MAX_TIMEOUT = 60s
;TIMEOUT_STEP = 10s
;;
;; This setting determines how often the db is queried to get the latest notification counts.
;; If the browser client supports EventSource and SharedWorker, a SharedWorker will be used in preference to polling notification. Set to -1 to disable the EventSource
;EVENT_SOURCE_UPDATE_TIME = 10s

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ui.svg]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Whether to render SVG files as images.  If SVG rendering is disabled, SVG files are displayed as text and cannot be embedded in markdown files as images.
;ENABLE_RENDER = true

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ui.csv]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Maximum allowed file size in bytes to render CSV files as table. (Set to 0 for no limit).
;MAX_FILE_SIZE = 524288

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[markdown]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Render soft line breaks as hard line breaks, which means a single newline character between
;; paragraphs will cause a line break and adding trailing whitespace to paragraphs is not
;; necessary to force a line break.
;; Render soft line breaks as hard line breaks for comments
;ENABLE_HARD_LINE_BREAK_IN_COMMENTS = true
;;
;; Render soft line breaks as hard line breaks for markdown documents
;ENABLE_HARD_LINE_BREAK_IN_DOCUMENTS = false
;;
;; Comma separated list of custom URL-Schemes that are allowed as links when rendering Markdown
;; for example git,magnet,ftp (more at https://en.wikipedia.org/wiki/List_of_URI_schemes)
;; URLs starting with http and https are always displayed, whatever is put in this entry.
;; If this entry is empty, all URL schemes are allowed.
;CUSTOM_URL_SCHEMES =
;;
;; List of file extensions that should be rendered/edited as Markdown
;; Separate the extensions with a comma. To render files without any extension as markdown, just put a comma
;FILE_EXTENSIONS = .md,.markdown,.mdown,.mkd,.livemd
;;
;; Enables math inline and block detection
;ENABLE_MATH = true

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[ssh.minimum_key_sizes]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Define allowed algorithms and their minimum key length (use -1 to disable a type)
;ED25519 = 256
;ECDSA = 256
;RSA = 2047 ; we allow 2047 here because an otherwise valid 2048 bit RSA key can be reported as having 2047 bit length
;DSA = -1 ; set to 1024 to switch on

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[indexer]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Issue Indexer settings
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Issue indexer type, currently support: bleve, db, elasticsearch or meilisearch default is bleve
;ISSUE_INDEXER_TYPE = bleve
;;
;; Issue indexer storage path, available when ISSUE_INDEXER_TYPE is bleve
;ISSUE_INDEXER_PATH = indexers/issues.bleve ; Relative paths will be made absolute against _`AppWorkPath`_.
;;
;; Issue indexer connection string, available when ISSUE_INDEXER_TYPE is elasticsearch or meilisearch
;ISSUE_INDEXER_CONN_STR = http://elastic:changeme@localhost:9200
;;
;; Issue indexer name, available when ISSUE_INDEXER_TYPE is elasticsearch
;ISSUE_INDEXER_NAME = gitea_issues
;;
;; Timeout the indexer if it takes longer than this to start.
;; Set to -1 to disable timeout.
;STARTUP_TIMEOUT = 30s
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Repository Indexer settings
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; repo indexer by default disabled, since it uses a lot of disk space
;REPO_INDEXER_ENABLED = false
;;
;; repo indexer units, the items to index, could be `sources`, `forks`, `mirrors`, `templates` or any combination of them separated by a comma.
;; If empty then it defaults to `sources` only, as if you'd like to disable fully please see REPO_INDEXER_ENABLED.
;REPO_INDEXER_REPO_TYPES = sources,forks,mirrors,templates
;;
;; Code search engine type, could be `bleve` or `elasticsearch`.
;REPO_INDEXER_TYPE = bleve
;;
;; Index file used for code search. available when `REPO_INDEXER_TYPE` is bleve
;REPO_INDEXER_PATH = indexers/repos.bleve
;;
;; Code indexer connection string, available when `REPO_INDEXER_TYPE` is elasticsearch. i.e. http://elastic:changeme@localhost:9200
;REPO_INDEXER_CONN_STR =
;;
;; Code indexer name, available when `REPO_INDEXER_TYPE` is elasticsearch
;REPO_INDEXER_NAME = gitea_codes
;;
;; A comma separated list of glob patterns (see https://github.com/gobwas/glob) to include
;; in the index; default is empty
;REPO_INDEXER_INCLUDE =
;;
;; A comma separated list of glob patterns to exclude from the index; ; default is empty
;REPO_INDEXER_EXCLUDE =
;;
;MAX_FILE_SIZE = 1048576

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[queue]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Specific queues can be individually configured with [queue.name]. [queue] provides defaults
;; ([queue.issue_indexer] is special due to the old configuration described above)
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; General queue queue type, currently support: persistable-channel, channel, level, redis, dummy
;; default to persistable-channel
;TYPE = persistable-channel
;;
;; data-dir for storing persistable queues and level queues, individual queues will default to `queues/common` meaning the queue is shared.
;DATADIR = queues/ ; Relative paths will be made absolute against `%(APP_DATA_PATH)s`.
;;
;; Default queue length before a channel queue will block
;LENGTH = 100
;;
;; Batch size to send for batched queues
;BATCH_LENGTH = 20
;;
;; Connection string for redis queues this will store the redis or redis-cluster connection string.
;; When `TYPE` is `persistable-channel`, this provides a directory for the underlying leveldb
;; or additional options of the form `leveldb://path/to/db?option=value&....`, and will override `DATADIR`.
;CONN_STR = "redis://127.0.0.1:6379/0"
;;
;; Provides the suffix of the default redis/disk queue name - specific queues can be overridden within in their [queue.name] sections.
;QUEUE_NAME = "_queue"
;;
;; Provides the suffix of the default redis/disk unique queue set name - specific queues can be overridden within in their [queue.name] sections.
;SET_NAME = "_unique"
;;
;; Maximum number of worker go-routines for the queue. Default value is "CpuNum/2" clipped to between 1 and 10.
;MAX_WORKERS = ; (dynamic)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[admin]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Disallow regular (non-admin) users from creating organizations.
;DISABLE_REGULAR_ORG_CREATION = false
;;
;; Default configuration for email notifications for users (user configurable). Options: enabled, onmention, disabled
;DEFAULT_EMAIL_NOTIFICATIONS = enabled

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[openid]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; OpenID is an open, standard and decentralized authentication protocol.
;; Your identity is the address of a webpage you provide, which describes
;; how to prove you are in control of that page.
;;
;; For more info: https://en.wikipedia.org/wiki/OpenID
;;
;; Current implementation supports OpenID-2.0
;;
;; Tested to work providers at the time of writing:
;;  - Any GNUSocial node (your.hostname.tld/username)
;;  - Any SimpleID provider (http://simpleid.koinic.net)
;;  - http://openid.org.cn/
;;  - openid.stackexchange.com
;;  - login.launchpad.net
;;  - <username>.livejournal.com
;;
;; Whether to allow signin in via OpenID
;ENABLE_OPENID_SIGNIN = true
;;
;; Whether to allow registering via OpenID
;; Do not include to rely on rhw DISABLE_REGISTRATION setting
;;ENABLE_OPENID_SIGNUP = true
;;
;; Allowed URI patterns (POSIX regexp).
;; Space separated.
;; Only these would be allowed if non-blank.
;; Example value: trusted.domain.org trusted.domain.net
;WHITELISTED_URIS =
;;
;; Forbidden URI patterns (POSIX regexp).
;; Space separated.
;; Only used if WHITELISTED_URIS is blank.
;; Example value: loadaverage.org/badguy stackexchange.com/.*spammer
;BLACKLISTED_URIS =

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[oauth2_client]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Whether a new auto registered oauth2 user needs to confirm their email.
;; Do not include to use the REGISTER_EMAIL_CONFIRM setting from the `[service]` section.
;REGISTER_EMAIL_CONFIRM =
;;
;; Scopes for the openid connect oauth2 provider (separated by space, the openid scope is implicitly added).
;; Typical values are profile and email.
;; For more information about the possible values see https://openid.net/specs/openid-connect-core-1_0.html#ScopeClaims
;OPENID_CONNECT_SCOPES =
;;
;; Automatically create user accounts for new oauth2 users.
;ENABLE_AUTO_REGISTRATION = false
;;
;; The source of the username for new oauth2 accounts:
;; userid = use the userid / sub attribute
;; nickname = use the nickname attribute
;; email = use the username part of the email attribute
;USERNAME = nickname
;;
;; Update avatar if available from oauth2 provider.
;; Update will be performed on each login.
;UPDATE_AVATAR = false
;;
;; How to handle if an account / email already exists:
;; disabled = show an error
;; login = show an account linking login
;; auto = link directly with the account
;ACCOUNT_LINKING = login

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[webhook]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Hook task queue length, increase if webhook shooting starts hanging
;QUEUE_LENGTH = 1000
;;
;; Deliver timeout in seconds
;DELIVER_TIMEOUT = 5
;;
;; Webhook can only call allowed hosts for security reasons. Comma separated list, eg: external, 192.168.1.0/24, *.mydomain.com
;; Built-in: loopback (for localhost), private (for LAN/intranet), external (for public hosts on internet), * (for all hosts)
;; CIDR list: 1.2.3.0/8, 2001:db8::/32
;; Wildcard hosts: *.mydomain.com, 192.168.100.*
;; Since 1.15.7. Default to * for 1.15.x, external for 1.16 and later
;ALLOWED_HOST_LIST = external
;;
;; Allow insecure certification
;SKIP_TLS_VERIFY = false
;;
;; Number of history information in each page
;PAGING_NUM = 10
;;
;; Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy
;PROXY_URL =
;;
;; Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts.
;PROXY_HOSTS =

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[mailer]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; NOTICE: this section is for Gitea 1.18 and later. If you are using Gitea 1.17 or older,
;; please refer to
;; https://github.com/go-gitea/gitea/blob/release/v1.17/custom/conf/app.example.ini
;; https://github.com/go-gitea/gitea/blob/release/v1.17/docs/content/doc/advanced/config-cheat-sheet.en-us.md
;;
;ENABLED = false
;;
;; Buffer length of channel, keep it as it is if you don't know what it is.
;SEND_BUFFER_LEN = 100
;;
;; Prefix displayed before subject in mail
;SUBJECT_PREFIX =
;;
;; Mail server protocol. One of "smtp", "smtps", "smtp+starttls", "smtp+unix", "sendmail", "dummy".
;; - sendmail: use the operating system's `sendmail` command instead of SMTP. This is common on Linux systems.
;; - dummy: send email messages to the log as a testing phase.
;; If your provider does not explicitly say which protocol it uses but does provide a port,
;; you can set SMTP_PORT instead and this will be inferred.
;; (Before 1.18, see the notice, this was controlled via MAILER_TYPE and IS_TLS_ENABLED.)
;PROTOCOL =
;;
;; Mail server address, e.g. smtp.gmail.com.
;; For smtp+unix, this should be a path to a unix socket instead.
;; (Before 1.18, see the notice, this was combined with SMTP_PORT as HOST.)
;SMTP_ADDR =
;;
;; Mail server port. Common ports are:
;;   25:  insecure SMTP
;;   465: SMTP Secure
;;   587: StartTLS
;; If no protocol is specified, it will be inferred by this setting.
;; (Before 1.18, this was combined with SMTP_ADDR as HOST.)
;SMTP_PORT =
;;
;; Enable HELO operation. Defaults to true.
;ENABLE_HELO = true
;;
;; Custom hostname for HELO operation.
;; If no value is provided, one is retrieved from system.
;HELO_HOSTNAME =
;;
;; If set to `true`, completely ignores server certificate validation errors.
;; This option is unsafe. Consider adding the certificate to the system trust store instead.
;FORCE_TRUST_SERVER_CERT = false
;;
;; Use client certificate in connection.
;USE_CLIENT_CERT = false
;CLIENT_CERT_FILE = custom/mailer/cert.pem
;CLIENT_KEY_FILE = custom/mailer/key.pem
;;
;; Mail from address, RFC 5322. This can be just an email address, or the `"Name" <email@example.com>` format
;FROM =
;;
;; Sometimes it is helpful to use a different address on the envelope. Set this to use ENVELOPE_FROM as the from on the envelope. Set to `<>` to send an empty address.
;ENVELOPE_FROM =
;;
;; Mailer user name and password, if required by provider.
;USER =
;;
;; Use PASSWD = `your password` for quoting if you use special characters in the password.
;PASSWD =
;;
;; Send mails only in plain text, without HTML alternative
;SEND_AS_PLAIN_TEXT = false
;;
;; Specify an alternative sendmail binary
;SENDMAIL_PATH = sendmail
;;
;; Specify any extra sendmail arguments
;; WARNING: if your sendmail program interprets options you should set this to "--" or terminate these args with "--"
;SENDMAIL_ARGS =
;;
;; Timeout for Sendmail
;SENDMAIL_TIMEOUT = 5m
;;
;; convert \r\n to \n for Sendmail
;SENDMAIL_CONVERT_CRLF = true

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[email.incoming]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Enable handling of incoming emails.
;ENABLED = false
;;
;; The email address including the %{token} placeholder that will be replaced per user/action.
;; Example: incoming+%{token}@example.com
;; The placeholder must appear in the user part of the address (before the @).
;REPLY_TO_ADDRESS =
;;
;; IMAP server host
;HOST =
;;
;; IMAP server port
;PORT =
;;
;; Username of the receiving account
;USERNAME =
;;
;; Password of the receiving account
;PASSWORD =
;;
;; Whether the IMAP server uses TLS.
;USE_TLS = false
;;
;; If set to true, completely ignores server certificate validation errors. This option is unsafe.
;SKIP_TLS_VERIFY = true
;;
;; The mailbox name where incoming mail will end up.
;MAILBOX = INBOX
;;
;; Whether handled messages should be deleted from the mailbox.
;DELETE_HANDLED_MESSAGE = true
;;
;; Maximum size of a message to handle. Bigger messages are ignored. Set to 0 to allow every size.
;MAXIMUM_MESSAGE_SIZE = 10485760

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cache]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; if the cache enabled
;ENABLED = true
;;
;; Either "memory", "redis", "memcache", or "twoqueue". default is "memory"
;ADAPTER = memory
;;
;; For "memory" only, GC interval in seconds, default is 60
;INTERVAL = 60
;;
;; For "redis", "redis-cluster" and "memcache", connection host address
;; redis: `redis://127.0.0.1:6379/0?pool_size=100&idle_timeout=180s`
;; redis-cluster: `redis+cluster://127.0.0.1:6379/0?pool_size=100&idle_timeout=180s`
;; memcache: `127.0.0.1:11211`
;; twoqueue: `{"size":50000,"recent_ratio":0.25,"ghost_ratio":0.5}` or `50000`
;HOST =
;;
;; Time to keep items in cache if not used, default is 16 hours.
;; Setting it to -1 disables caching
;ITEM_TTL = 16h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Last commit cache
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cache.last_commit]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; if the cache enabled
;ENABLED = true
;;
;; Time to keep items in cache if not used, default is 8760 hours.
;; Setting it to -1 disables caching
;ITEM_TTL = 8760h
;;
;; Only enable the cache when repository's commits count great than
;COMMITS_COUNT = 1000

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[session]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Either "memory", "file", "redis", "redis-cluster", "db", "mysql", "couchbase", "memcache" or "postgres"
;; Default is "memory". "db" will reuse the configuration in [database]
;PROVIDER = memory
;;
;; Provider config options
;; memory: doesn't have any config yet
;; file: session file path, e.g. `data/sessions`
;; redis: `redis://127.0.0.1:6379/0?pool_size=100&idle_timeout=180s`
;; redis-cluster: `redis+cluster://127.0.0.1:6379/0?pool_size=100&idle_timeout=180s`
;; mysql: go-sql-driver/mysql dsn config string, e.g. `root:password@/session_table`
;PROVIDER_CONFIG = data/sessions ; Relative paths will be made absolute against _`AppWorkPath`_.
;;
;; Session cookie name
;COOKIE_NAME = i_like_gitea
;;
;; If you use session in https only, default is false
;COOKIE_SECURE = false
;;
;; Session GC time interval in seconds, default is 86400 (1 day)
;GC_INTERVAL_TIME = 86400
;;
;; Session life time in seconds, default is 86400 (1 day)
;SESSION_LIFE_TIME = 86400
;;
;; SameSite settings. Either "none", "lax", or "strict"
;SAME_SITE=lax

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[picture]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;AVATAR_UPLOAD_PATH = data/avatars
;REPOSITORY_AVATAR_UPLOAD_PATH = data/repo-avatars
;;
;; How Gitea deals with missing repository avatars
;; none = no avatar will be displayed; random = random avatar will be displayed; image = default image will be used
;REPOSITORY_AVATAR_FALLBACK = none
;REPOSITORY_AVATAR_FALLBACK_IMAGE = /img/repo_default.png
;;
;; Max Width and Height of uploaded avatars.
;; This is to limit the amount of RAM used when resizing the image.
;AVATAR_MAX_WIDTH = 4096
;AVATAR_MAX_HEIGHT = 4096
;;
;; The multiplication factor for rendered avatar images.
;; Larger values result in finer rendering on HiDPI devices.
;AVATAR_RENDERED_SIZE_FACTOR = 2
;;
;; Maximum allowed file size for uploaded avatars.
;; This is to limit the amount of RAM used when resizing the image.
;AVATAR_MAX_FILE_SIZE = 1048576
;;
;; If the uploaded file is not larger than this byte size, the image will be used as is, without resizing/converting.
;AVATAR_MAX_ORIGIN_SIZE = 262144
;;
;; Chinese users can choose "duoshuo"
;; or a custom avatar source, like: http://cn.gravatar.com/avatar/
;GRAVATAR_SOURCE = gravatar
;;
;; This value will always be true in offline mode.
;DISABLE_GRAVATAR = false
;;
;; Federated avatar lookup uses DNS to discover avatar associated
;; with emails, see https://www.libravatar.org
;; This value will always be false in offline mode or when Gravatar is disabled.
;ENABLE_FEDERATED_AVATAR = false

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[attachment]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Whether issue and pull request attachments are enabled. Defaults to `true`
;ENABLED = true
;;
;; Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
;ALLOWED_TYPES = .csv,.docx,.fodg,.fodp,.fods,.fodt,.gif,.gz,.jpeg,.jpg,.log,.md,.mov,.mp4,.odf,.odg,.odp,.ods,.odt,.patch,.pdf,.png,.pptx,.svg,.tgz,.txt,.webm,.xls,.xlsx,.zip
;;
;; Max size of each file. Defaults to 4MB
;MAX_SIZE = 4
;;
;; Max number of files per upload. Defaults to 5
;MAX_FILES = 5
;;
;; Storage type for attachments, `local` for local disk or `minio` for s3 compatible
;; object storage service, default is `local`.
;STORAGE_TYPE = local
;;
;; Allows the storage driver to redirect to authenticated URLs to serve files directly
;; Currently, only `minio` is supported.
;SERVE_DIRECT = false
;;
;; Path for attachments. Defaults to `data/attachments` only available when STORAGE_TYPE is `local`
;PATH = data/attachments
;;
;; Minio endpoint to connect only available when STORAGE_TYPE is `minio`
;MINIO_ENDPOINT = localhost:9000
;;
;; Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
;MINIO_ACCESS_KEY_ID =
;;
;; Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
;MINIO_SECRET_ACCESS_KEY =
;;
;; Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
;MINIO_BUCKET = gitea
;;
;; Minio location to create bucket only available when STORAGE_TYPE is `minio`
;MINIO_LOCATION = us-east-1
;;
;; Minio base path on the bucket only available when STORAGE_TYPE is `minio`
;MINIO_BASE_PATH = attachments/
;;
;; Minio enabled ssl only available when STORAGE_TYPE is `minio`
;MINIO_USE_SSL = false
;;
;; Minio skip SSL verification available when STORAGE_TYPE is `minio`
;MINIO_INSECURE_SKIP_VERIFY = false
;;
;; Minio checksum algorithm: default (for MinIO or AWS S3) or md5 (for Cloudflare or Backblaze)
;MINIO_CHECKSUM_ALGORITHM = default

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[time]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Location the UI time display i.e. Asia/Shanghai
;; Empty means server's location setting
;DEFAULT_UI_LOCATION =

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Common settings
;;
;; Setting this to true will enable all cron tasks periodically with default settings.
;ENABLED = false
;; Setting this to true will run all enabled cron tasks when Gitea starts.
;RUN_AT_START = false
;;
;; Note: ``SCHEDULE`` accept formats
;;    - Full crontab specs, e.g. "* * * * * ?"
;;    - Descriptors, e.g. "@midnight", "@every 1h30m"
;; See more: https://pkg.go.dev/github.com/gogs/cron@v0.0.0-20171120032916-9f6c956d3e14

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Basic cron tasks - enabled by default
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Clean up old repository archives
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.archive_cleanup]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Whether to enable the job
;ENABLED = true
;; Whether to always run at least once at start up time (if ENABLED)
;RUN_AT_START = true
;; Whether to emit notice on successful execution too
;NOTICE_ON_SUCCESS = false
;; Time interval for job to run
;SCHEDULE = @midnight
;; Archives created more than OLDER_THAN ago are subject to deletion
;OLDER_THAN = 24h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Update mirrors
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.update_mirrors]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;SCHEDULE = @every 10m
;; Enable running Update mirrors task periodically.
;ENABLED = true
;; Run Update mirrors task when Gitea starts.
;RUN_AT_START = false
;; Notice if not success
;NOTICE_ON_SUCCESS = false
;; Limit the number of mirrors added to the queue to this number
;; (negative values mean no limit, 0 will result in no result in no mirrors being queued effectively disabling pull mirror updating.)
;PULL_LIMIT=50
;; Limit the number of mirrors added to the queue to this number
;; (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling push mirror updating)
;PUSH_LIMIT=50

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Repository health check
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.repo_health_check]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;SCHEDULE = @midnight
;; Enable running Repository health check task periodically.
;ENABLED = true
;; Run Repository health check task when Gitea starts.
;RUN_AT_START = false
;; Notice if not success
;NOTICE_ON_SUCCESS = false
;TIMEOUT = 60s
;; Arguments for command 'git fsck', e.g. "--unreachable --tags"
;; see more on http://git-scm.com/docs/git-fsck
;ARGS =

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Check repository statistics
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.check_repo_stats]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Enable running check repository statistics task periodically.
;ENABLED = true
;; Run check repository statistics task when Gitea starts.
;RUN_AT_START = true
;; Notice if not success
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @midnight

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.update_migration_poster_id]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Update migrated repositories' issues and comments' posterid, it will always attempt synchronization when the instance starts.
;ENABLED = true
;; Update migrated repositories' issues and comments' posterid when starting server (default true)
;RUN_AT_START = true
;; Notice if not success
;NOTICE_ON_SUCCESS = false
;; Interval as a duration between each synchronization. (default every 24h)
;SCHEDULE = @midnight

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Synchronize external user data (only LDAP user synchronization is supported)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.sync_external_users]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = true
;; Synchronize external user data when starting server (default false)
;RUN_AT_START = false
;; Notice if not success
;NOTICE_ON_SUCCESS = false
;; Interval as a duration between each synchronization (default every 24h)
;SCHEDULE = @midnight
;; Create new users, update existing user data and disable users that are not in external source anymore (default)
;;   or only create new users if UPDATE_EXISTING is set to false
;UPDATE_EXISTING = true

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Clean-up deleted branches
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.deleted_branches_cleanup]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = true
;; Clean-up deleted branches when starting server (default true)
;RUN_AT_START = true
;; Notice if not success
;NOTICE_ON_SUCCESS = false
;; Interval as a duration between each synchronization (default every 24h)
;SCHEDULE = @midnight
;; deleted branches than OLDER_THAN ago are subject to deletion
;OLDER_THAN = 24h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Cleanup hook_task table
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.cleanup_hook_task_table]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Whether to enable the job
;ENABLED = true
;; Whether to always run at start up time (if ENABLED)
;RUN_AT_START = false
;; Time interval for job to run
;SCHEDULE = @midnight
;; OlderThan or PerWebhook. How the records are removed, either by age (i.e. how long ago hook_task record was delivered) or by the number to keep per webhook (i.e. keep most recent x deliveries per webhook).
;CLEANUP_TYPE = OlderThan
;; If CLEANUP_TYPE is set to OlderThan, then any delivered hook_task records older than this expression will be deleted.
;OLDER_THAN = 168h
;; If CLEANUP_TYPE is set to PerWebhook, this is number of hook_task records to keep for a webhook (i.e. keep the most recent x deliveries).
;NUMBER_TO_KEEP = 10

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Cleanup expired packages
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.cleanup_packages]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Whether to enable the job
;ENABLED = true
;; Whether to always run at least once at start up time (if ENABLED)
;RUN_AT_START = true
;; Whether to emit notice on successful execution too
;NOTICE_ON_SUCCESS = false
;; Time interval for job to run
;SCHEDULE = @midnight
;; Unreferenced blobs created more than OLDER_THAN ago are subject to deletion
;OLDER_THAN = 24h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Extended cron task - not enabled by default
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Delete all unactivated accounts
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.delete_inactive_accounts]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @annually
;OLDER_THAN = 168h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Delete all repository archives
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.delete_repo_archives]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @annually;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Garbage collect all repositories
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.git_gc_repos]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @every 72h
;TIMEOUT = 60s
;; Arguments for command 'git gc'
;; The default value is same with [git] -> GC_ARGS
;ARGS =

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Update the '.ssh/authorized_keys' file with Gitea SSH keys
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.resync_all_sshkeys]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @every 72h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Resynchronize pre-receive, update and post-receive hooks of all repositories.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.resync_all_hooks]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @every 72h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Reinitialize all missing Git repositories for which records exist
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.reinit_missing_repos]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @every 72h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Delete all repositories missing their Git files
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.delete_missing_repos]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @every 72h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Delete generated repository avatars
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.delete_generated_repository_avatars]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @every 72h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Delete all old actions from database
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.delete_old_actions]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NOTICE_ON_SUCCESS = false
;SCHEDULE = @every 168h
;OLDER_THAN = 8760h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Check for new Gitea versions
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.update_checker]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = true
;RUN_AT_START = false
;ENABLE_SUCCESS_NOTICE = false
;SCHEDULE = @every 168h
;HTTP_ENDPOINT = https://dl.gitea.com/gitea/version.json

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Delete all old system notices from database
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.delete_old_system_notices]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;RUN_AT_START = false
;NO_SUCCESS_NOTICE = false
;SCHEDULE = @every 168h
;OLDER_THAN = 8760h

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Garbage collect LFS pointers in repositories
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[cron.gc_lfs]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;ENABLED = false
;; Garbage collect LFS pointers in repositories (default false)
;RUN_AT_START = false
;; Interval as a duration between each gc run (default every 24h)
;SCHEDULE = @every 24h
;; Only attempt to garbage collect LFSMetaObjects older than this (default 7 days)
;OLDER_THAN = 168h
;; Only attempt to garbage collect LFSMetaObjects that have not been attempted to be garbage collected for this long (default 3 days)
;LAST_UPDATED_MORE_THAN_AGO = 72h
; Minimum number of stale LFSMetaObjects to check per repo. Set to `0` to always check all.
;NUMBER_TO_CHECK_PER_REPO = 100
;Check at least this proportion of LFSMetaObjects per repo. (This may cause all stale LFSMetaObjects to be checked.)
;PROPORTION_TO_CHECK_PER_REPO = 0.6

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[mirror]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Enables the mirror functionality. Set to **false** to disable all mirrors. Pre-existing mirrors remain valid but won't be updated; may be converted to regular repo.
;ENABLED = true
;; Disable the creation of **new** pull mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
;DISABLE_NEW_PULL = false
;; Disable the creation of **new** push mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
;DISABLE_NEW_PUSH = false
;; Default interval as a duration between each check
;DEFAULT_INTERVAL = 8h
;; Min interval as a duration must be > 1m
;MIN_INTERVAL = 10m

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[api]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Enables the API documentation endpoints (/api/swagger, /api/v1/swagger, …). True or false.
;ENABLE_SWAGGER = true
;; Max number of items in a page
;MAX_RESPONSE_ITEMS = 50
;; Default paging number of api
;DEFAULT_PAGING_NUM = 30
;; Default and maximum number of items per page for git trees api
;DEFAULT_GIT_TREES_PER_PAGE = 1000
;; Default max size of a blob returned by the blobs API (default is 10MiB)
;DEFAULT_MAX_BLOB_SIZE = 10485760

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[i18n]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; The first locale will be used as the default if user browser's language doesn't match any locale in the list.
;LANGS = en-US,zh-CN,zh-HK,zh-TW,de-DE,fr-FR,nl-NL,lv-LV,ru-RU,uk-UA,ja-JP,es-ES,pt-BR,pt-PT,pl-PL,bg-BG,it-IT,fi-FI,tr-TR,cs-CZ,sv-SE,ko-KR,el-GR,fa-IR,hu-HU,id-ID,ml-IN
;NAMES = English,简体中文,繁體中文（香港）,繁體中文（台灣）,Deutsch,Français,Nederlands,Latviešu,Русский,Українська,日本語,Español,Português do Brasil,Português de Portugal,Polski,Български,Italiano,Suomi,Türkçe,Čeština,Српски,Svenska,한국어,Ελληνικά,فارسی,Magyar nyelv,Bahasa Indonesia,മലയാളം

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[highlight.mapping]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Extension mapping to highlight class
;; e.g. .toml=ini

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[other]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Show version information about Gitea and Go in the footer
;SHOW_FOOTER_VERSION = true
;; Show template execution time in the footer
;SHOW_FOOTER_TEMPLATE_LOAD_TIME = true
;; Generate sitemap. Defaults to `true`.
;ENABLE_SITEMAP = true
;; Enable/Disable RSS/Atom feed
;ENABLE_FEED = true

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[markup]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Set the maximum number of characters in a mermaid source. (Set to -1 to disable limits)
;MERMAID_MAX_SOURCE_CHARACTERS = 5000

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[markup.sanitizer.1]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; The following keys can appear once to define a sanitation policy rule.
;; This section can appear multiple times by adding a unique alphanumeric suffix to define multiple rules.
;; e.g., [markup.sanitizer.1] -> [markup.sanitizer.2] -> [markup.sanitizer.TeX]
;ELEMENT = span
;ALLOW_ATTR = class
;REGEXP = ^(info|warning|error)$
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Other markup formats e.g. asciidoc
;;
;; uncomment and enable the below section.
;; (You can add other markup formats by copying the section and adjusting
;;  the section name suffix "asciidoc" to something else.)
;[markup.asciidoc]
;ENABLED = false
;; List of file extensions that should be rendered by an external command
;FILE_EXTENSIONS = .adoc,.asciidoc
;; External command to render all matching extensions
;RENDER_COMMAND = "asciidoc --out-file=- -"
;; Don't pass the file on STDIN, pass the filename as argument instead.
;IS_INPUT_FILE = false
;; How the content will be rendered.
;; * sanitized: Sanitize the content and render it inside current page, default to only allow a few HTML tags and attributes. Customized sanitizer rules can be defined in [markup.sanitizer.*] .
;; * no-sanitizer: Disable the sanitizer and render the content inside current page. It's **insecure** and may lead to XSS attack if the content contains malicious code.
;; * iframe: Render the content in a separate standalone page and embed it into current page by iframe. The iframe is in sandbox mode with same-origin disabled, and the JS code are safely isolated from parent page.
;RENDER_CONTENT_MODE=sanitized

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[metrics]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Enables metrics endpoint. True or false; default is false.
;ENABLED = false
;; If you want to add authorization, specify a token here
;TOKEN =
;; Enable issue by label metrics; default is false
;ENABLED_ISSUE_BY_LABEL = false
;; Enable issue by repository metrics; default is false
;ENABLED_ISSUE_BY_REPOSITORY = false

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[task]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Task queue type, could be `channel` or `redis`.
;QUEUE_TYPE = channel
;;
;; Task queue length, available only when `QUEUE_TYPE` is `channel`.
;QUEUE_LENGTH = 1000
;;
;; Task queue connection string, available only when `QUEUE_TYPE` is `redis`.
;; If there is a password of redis, use `redis://127.0.0.1:6379/0?pool_size=100&idle_timeout=180s` or `redis+cluster://127.0.0.1:6379/0?pool_size=100&idle_timeout=180s` for `redis-clsuter`.
;QUEUE_CONN_STR = "redis://127.0.0.1:6379/0?pool_size=100&idle_timeout=180s"

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[migrations]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Max attempts per http/https request on migrations.
;MAX_ATTEMPTS = 3
;;
;; Backoff time per http/https request retry (seconds)
;RETRY_BACKOFF = 3
;;
;; Allowed domains for migrating, default is blank. Blank means everything will be allowed.
;; Multiple domains could be separated by commas.
;; Wildcard is supported: "github.com, *.github.com"
;ALLOWED_DOMAINS =
;;
;; Blocklist for migrating, default is blank. Multiple domains could be separated by commas.
;; When ALLOWED_DOMAINS is not blank, this option has a higher priority to deny domains.
;; Wildcard is supported.
;BLOCKED_DOMAINS =
;;
;; Allow private addresses defined by RFC 1918, RFC 1122, RFC 4632 and RFC 4291 (false by default)
;; If a domain is allowed by ALLOWED_DOMAINS, this option will be ignored.
;ALLOW_LOCALNETWORKS = false

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[federation]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Enable/Disable federation capabilities
;ENABLED = false
;;
;; Enable/Disable user statistics for nodeinfo if federation is enabled
;SHARE_USER_STATISTICS = true
;;
;; Maximum federation request and response size (MB)
;MAX_SIZE = 4
;;
;; WARNING: Changing the settings below can break federation.
;;
;; HTTP signature algorithms
;ALGORITHMS = rsa-sha256, rsa-sha512, ed25519
;;
;; HTTP signature digest algorithm
;DIGEST_ALGORITHM = SHA-256
;;
;; GET headers for federation requests
;GET_HEADERS = (request-target), Date
;;
;; POST headers for federation requests
;POST_HEADERS = (request-target), Date, Digest

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[packages]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Enable/Disable package registry capabilities
;ENABLED = true
;;
;STORAGE_TYPE = local
;; override the minio base path if storage type is minio
;MINIO_BASE_PATH = packages/
;;
;; Path for chunked uploads. Defaults to APP_DATA_PATH + `tmp/package-upload`
;CHUNKED_UPLOAD_PATH = tmp/package-upload
;;
;; Maximum count of package versions a single owner can have (`-1` means no limits)
;LIMIT_TOTAL_OWNER_COUNT = -1
;; Maximum size of packages a single owner can use (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_TOTAL_OWNER_SIZE = -1
;; Maximum size of an Alpine upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_ALPINE = -1
;; Maximum size of a Cargo upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_CARGO = -1
;; Maximum size of a Chef upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_CHEF = -1
;; Maximum size of a Composer upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_COMPOSER = -1
;; Maximum size of a Conan upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_CONAN = -1
;; Maximum size of a Conda upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_CONDA = -1
;; Maximum size of a Container upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_CONTAINER = -1
;; Maximum size of a CRAN upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_CRAN = -1
;; Maximum size of a Debian upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_DEBIAN = -1
;; Maximum size of a Generic upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_GENERIC = -1
;; Maximum size of a Go upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_GO = -1
;; Maximum size of a Helm upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_HELM = -1
;; Maximum size of a Maven upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_MAVEN = -1
;; Maximum size of a npm upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_NPM = -1
;; Maximum size of a NuGet upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_NUGET = -1
;; Maximum size of a Pub upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_PUB = -1
;; Maximum size of a PyPI upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_PYPI = -1
;; Maximum size of a RPM upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_RPM = -1
;; Maximum size of a RubyGems upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_RUBYGEMS = -1
;; Maximum size of a Swift upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_SWIFT = -1
;; Maximum size of a Vagrant upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
;LIMIT_SIZE_VAGRANT = -1

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; default storage for attachments, lfs and avatars
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[storage]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; storage type
;STORAGE_TYPE = local

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; repo-archive storage will override storage
;;
;[repo-archive]
;STORAGE_TYPE = local
;;
;; Where your lfs files reside, default is data/lfs.
;PATH = data/repo-archive
;;
;; override the minio base path if storage type is minio
;MINIO_BASE_PATH = repo-archive/

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; settings for repository archives, will override storage setting
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[storage.repo-archive]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; storage type
;STORAGE_TYPE = local

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; lfs storage will override storage
;;
;[lfs]
;STORAGE_TYPE = local
;;
;; Where your lfs files reside, default is data/lfs.
;PATH = data/lfs
;;
;; override the minio base path if storage type is minio
;MINIO_BASE_PATH = lfs/

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; settings for packages, will override storage setting
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[storage.packages]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; storage type
;STORAGE_TYPE = local

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; customize storage
;[storage.my_minio]
;STORAGE_TYPE = minio
;;
;; Minio endpoint to connect only available when STORAGE_TYPE is `minio`
;MINIO_ENDPOINT = localhost:9000
;;
;; Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
;MINIO_ACCESS_KEY_ID =
;;
;; Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
;MINIO_SECRET_ACCESS_KEY =
;;
;; Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
;MINIO_BUCKET = gitea
;;
;; Minio location to create bucket only available when STORAGE_TYPE is `minio`
;MINIO_LOCATION = us-east-1
;;
;; Minio enabled ssl only available when STORAGE_TYPE is `minio`
;MINIO_USE_SSL = false
;;
;; Minio skip SSL verification available when STORAGE_TYPE is `minio`
;MINIO_INSECURE_SKIP_VERIFY = false

;[proxy]
;; Enable the proxy, all requests to external via HTTP will be affected
;PROXY_ENABLED = false
;; Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy/no_proxy
;PROXY_URL =
;; Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts.
;PROXY_HOSTS =

; [actions]
;; Enable/Disable actions capabilities
;ENABLED = false
;;
;; Default platform to get action plugins, `github` for `https://github.com`, `self` for the current Gitea instance.
;DEFAULT_ACTIONS_URL = github

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; settings for action logs, will override storage setting
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;[storage.actions_log]
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; storage type
;STORAGE_TYPE = local