Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому Add support to follow HTTP redirects
git-core follows HTTP redirects so JGit should also provide this.
Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]
We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:
* it does not allow cross-protocol redirects and thus fails on
http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
property "http.strictPostRedirect" is set to true. We don't want
to manipulate that system setting nor require it.
Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.
We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.
Redirects are followed only a certain number of times. There are two
ways to control that limit:
* by default, the limit is given by the http.maxRedirects system
property that is also used by the JDK. If the system property is
not set, the default is 5. (This is much lower than the JDK default
of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.
The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.
Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.
Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.
[1] https://git-scm.com/docs/git-config
[2] https://kernel.googlesource.com/pub/scm/git/git/+/6628eb41db5189c0cdfdced6d8697e7c813c5f0f
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
9 роки тому |
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281 |
- /*
- * Copyright (C) 2009-2017, Google Inc. and others
- *
- * This program and the accompanying materials are made available under the
- * terms of the Eclipse Distribution License v. 1.0 which is available at
- * https://www.eclipse.org/org/documents/edl-v10.php.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
- package org.eclipse.jgit.junit.http;
-
- import static org.junit.Assert.fail;
-
- import java.io.IOException;
- import java.net.URI;
- import java.net.URISyntaxException;
- import java.util.Collection;
- import java.util.Collections;
- import java.util.HashSet;
- import java.util.List;
- import java.util.Set;
-
- import org.eclipse.jetty.servlet.ServletContextHandler;
- import org.eclipse.jgit.junit.LocalDiskRepositoryTestCase;
- import org.eclipse.jgit.junit.TestRepository;
- import org.eclipse.jgit.lib.AnyObjectId;
- import org.eclipse.jgit.lib.Constants;
- import org.eclipse.jgit.lib.ObjectId;
- import org.eclipse.jgit.lib.Repository;
- import org.eclipse.jgit.revwalk.RevCommit;
- import org.eclipse.jgit.revwalk.RevObject;
- import org.eclipse.jgit.transport.RefSpec;
- import org.eclipse.jgit.transport.RemoteRefUpdate;
- import org.eclipse.jgit.transport.URIish;
-
- /**
- * Base class for HTTP related transport testing.
- */
- public abstract class HttpTestCase extends LocalDiskRepositoryTestCase {
- /** Constant <code>master="Constants.R_HEADS + Constants.MASTER"</code> */
- protected static final String master = Constants.R_HEADS + Constants.MASTER;
-
- /** In-memory application server; subclass must start. */
- protected AppServer server;
-
- /** {@inheritDoc} */
- @Override
- public void setUp() throws Exception {
- super.setUp();
- server = createServer();
- }
-
- /** {@inheritDoc} */
- @Override
- public void tearDown() throws Exception {
- server.tearDown();
- super.tearDown();
- }
-
- /**
- * Create the {@link AppServer}.This default implementation creates a server
- * without SSLsupport listening for HTTP connections on a dynamically chosen
- * port, which can be gotten once the server has been started via its
- * {@link org.eclipse.jgit.junit.http.AppServer#getPort()} method.
- * Subclasses may override if they need a more specialized server.
- *
- * @return the {@link org.eclipse.jgit.junit.http.AppServer}.
- * @since 4.9
- */
- protected AppServer createServer() {
- return new AppServer();
- }
-
- /**
- * Create TestRepository
- *
- * @return the TestRepository
- * @throws IOException
- */
- protected TestRepository<Repository> createTestRepository()
- throws IOException {
- return new TestRepository<>(createBareRepository());
- }
-
- /**
- * Convert path to URIish
- *
- * @param path
- * @return the URIish
- * @throws URISyntaxException
- */
- protected URIish toURIish(String path) throws URISyntaxException {
- URI u = server.getURI().resolve(path);
- return new URIish(u.toString());
- }
-
- /**
- * Convert a path relative to the app's context path to a URIish
- *
- * @param app
- * @param name
- * @return the warnings (if any) from the last execution
- * @throws URISyntaxException
- */
- protected URIish toURIish(ServletContextHandler app, String name)
- throws URISyntaxException {
- String p = app.getContextPath();
- if (!p.endsWith("/") && !name.startsWith("/"))
- p += "/";
- p += name;
- return toURIish(p);
- }
-
- /**
- * Get requests.
- *
- * @return list of events
- */
- protected List<AccessEvent> getRequests() {
- return server.getRequests();
- }
-
- /**
- * Get requests.
- *
- * @param base
- * @param path
- *
- * @return list of events
- */
- protected List<AccessEvent> getRequests(URIish base, String path) {
- return server.getRequests(base, path);
- }
-
- /**
- * Get requests.
- *
- * @param path
- *
- * @return list of events
- */
- protected List<AccessEvent> getRequests(String path) {
- return server.getRequests(path);
- }
-
- /**
- * Run fsck
- *
- * @param db
- * @param tips
- * @throws Exception
- */
- protected static void fsck(Repository db, RevObject... tips)
- throws Exception {
- try (TestRepository<? extends Repository> tr =
- new TestRepository<>(db)) {
- tr.fsck(tips);
- }
- }
-
- /**
- * Mirror refs
- *
- * @param refs
- * @return set of RefSpecs
- */
- protected static Set<RefSpec> mirror(String... refs) {
- HashSet<RefSpec> r = new HashSet<>();
- for (String name : refs) {
- RefSpec rs = new RefSpec(name);
- rs = rs.setDestination(name);
- rs = rs.setForceUpdate(true);
- r.add(rs);
- }
- return r;
- }
-
- /**
- * Push a commit
- *
- * @param from
- * @param q
- * @return collection of RefUpdates
- * @throws IOException
- */
- protected static Collection<RemoteRefUpdate> push(TestRepository from,
- RevCommit q) throws IOException {
- final Repository db = from.getRepository();
- final String srcExpr = q.name();
- final String dstName = master;
- final boolean forceUpdate = true;
- final String localName = null;
- final ObjectId oldId = null;
-
- RemoteRefUpdate u = new RemoteRefUpdate(db, srcExpr, dstName,
- forceUpdate, localName, oldId);
- return Collections.singleton(u);
- }
-
- /**
- * Create loose object path
- *
- * @param base
- * @param id
- * @return path of the loose object
- */
- public static String loose(URIish base, AnyObjectId id) {
- final String objectName = id.name();
- final String d = objectName.substring(0, 2);
- final String f = objectName.substring(2);
- return join(base, "objects/" + d + "/" + f);
- }
-
- /**
- * Join a base URIish and a path
- *
- * @param base
- * @param path
- * a relative path
- * @return the joined path
- */
- public static String join(URIish base, String path) {
- if (path.startsWith("/"))
- fail("Cannot join absolute path " + path + " to URIish " + base);
-
- String dir = base.getPath();
- if (!dir.endsWith("/"))
- dir += "/";
- return dir + path;
- }
-
- /**
- * Rewrite a url
- *
- * @param url
- * @param newProtocol
- * @param newPort
- * @return the rewritten url
- */
- protected static String rewriteUrl(String url, String newProtocol,
- int newPort) {
- String newUrl = url;
- if (newProtocol != null && !newProtocol.isEmpty()) {
- int schemeEnd = newUrl.indexOf("://");
- if (schemeEnd >= 0) {
- newUrl = newProtocol + newUrl.substring(schemeEnd);
- }
- }
- if (newPort > 0) {
- newUrl = newUrl.replaceFirst(":\\d+/", ":" + newPort + "/");
- } else {
- // Remove the port, if any
- newUrl = newUrl.replaceFirst(":\\d+/", "/");
- }
- return newUrl;
- }
-
- /**
- * Extend a path
- *
- * @param uri
- * @param pathComponents
- * @return the extended URIish
- * @throws URISyntaxException
- */
- protected static URIish extendPath(URIish uri, String pathComponents)
- throws URISyntaxException {
- String raw = uri.toString();
- String newComponents = pathComponents;
- if (!newComponents.startsWith("/")) {
- newComponents = '/' + newComponents;
- }
- if (!newComponents.endsWith("/")) {
- newComponents += '/';
- }
- int i = raw.lastIndexOf('/');
- raw = raw.substring(0, i) + newComponents + raw.substring(i + 1);
- return new URIish(raw);
- }
- }
|