You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

JGitText.properties 30KB

blame: Compute the origin of lines in a result file BlameGenerator digs through history and discovers the origin of each line of some result file. BlameResult consumes the stream of regions created by the generator and lays them out in a table for applications to display alongside of source lines. Applications may optionally push in the working tree copy of a file using the push(String, byte[]) method, allowing the application to receive accurate line annotations for the working tree version. Lines that are uncommitted (difference between HEAD and working tree) will show up with the description given by the application as the author, or "Not Committed Yet" as a default string. Applications may also run the BlameGenerator in reverse mode using the reverse(AnyObjectId, AnyObjectId) method instead of push(). When running in the reverse mode the generator annotates lines by the commit they are removed in, rather than the commit they were added in. This allows a user to discover where a line disappeared from when they are looking at an older revision in the repository. For example: blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java ( 1080) } 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081) 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /** 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file. Above we learn that line 1080 (a closing curly brace of the prior method) still exists in branch master, but the Javadoc comment below it has been removed by Christian Halstrick on May 20th as part of commit 2302a6d3. This result differs considerably from that of C Git's blame --reverse feature. JGit tells the reader which commit performed the delete, while C Git tells the reader the last commit that still contained the line, leaving it an exercise to the reader to discover the descendant that performed the removal. This is still only a basic implementation. Quite notably it is missing support for the smart block copy/move detection that the C implementation of `git blame` is well known for. Despite being incremental, the BlameGenerator can only be run once. After the generator runs it cannot be reused. A better implementation would support applications browsing through history efficiently. In regards to CQ 5110, only a little of the original code survives. CQ: 5110 Bug: 306161 Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f Signed-off-by: Kevin Sawicki <kevin@github.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
13 years ago
PackWriter: Support reuse of entire packs The most expensive part of packing a repository for transport to another system is enumerating all of the objects in the repository. Once this gets to the size of the linux-2.6 repository (1.8 million objects), enumeration can take several CPU minutes and costs a lot of temporary working set memory. Teach PackWriter to efficiently reuse an existing "cached pack" by answering a clone request with a thin pack followed by a larger cached pack appended to the end. This requires the repository owner to first construct the cached pack by hand, and record the tip commits inside of $GIT_DIR/objects/info/cached-packs: cd $GIT_DIR root=$(git rev-parse master) tmp=objects/.tmp-$$ names=$(echo $root | git pack-objects --keep-true-parents --revs $tmp) for n in $names; do chmod a-w $tmp-$n.pack $tmp-$n.idx touch objects/pack/pack-$n.keep mv $tmp-$n.pack objects/pack/pack-$n.pack mv $tmp-$n.idx objects/pack/pack-$n.idx done (echo "+ $root"; for n in $names; do echo "P $n"; done; echo) >>objects/info/cached-packs git repack -a -d When a clone request needs to include $root, the corresponding cached pack will be copied as-is, rather than enumerating all of the objects that are reachable from $root. For a linux-2.6 kernel repository that should be about 376 MiB, the above process creates two packs of 368 MiB and 38 MiB[1]. This is a local disk usage increase of ~26 MiB, due to reduced delta compression between the large cached pack and the smaller recent activity pack. The overhead is similar to 1 full copy of the compressed project sources. With this cached pack in hand, JGit daemon completes a clone request in 1m17s less time, but a slightly larger data transfer (+2.39 MiB): Before: remote: Counting objects: 1861830, done remote: Finding sources: 100% (1861830/1861830) remote: Getting sizes: 100% (88243/88243) remote: Compressing objects: 100% (88184/88184) Receiving objects: 100% (1861830/1861830), 376.01 MiB | 19.01 MiB/s, done. remote: Total 1861830 (delta 4706), reused 1851053 (delta 1553844) Resolving deltas: 100% (1564621/1564621), done. real 3m19.005s After: remote: Counting objects: 1601, done remote: Counting objects: 1828460, done remote: Finding sources: 100% (50475/50475) remote: Getting sizes: 100% (18843/18843) remote: Compressing objects: 100% (7585/7585) remote: Total 1861830 (delta 2407), reused 1856197 (delta 37510) Receiving objects: 100% (1861830/1861830), 378.40 MiB | 31.31 MiB/s, done. Resolving deltas: 100% (1559477/1559477), done. real 2m2.938s Repository owners can periodically refresh their cached packs by repacking their repository, folding all newer objects into a larger cached pack. Since repacking is already considered to be a normal Git maintenance activity, this isn't a very big burden. [1] In this test $root was set back about two weeks. Change-Id: Ib87131d5c4b5e8c5cacb0f4fe16ff4ece554734b Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
13 years ago
Merging Git notes Merging Git notes branches has several differences from merging "normal" branches. Although Git notes are initially stored as one flat tree the tree may fanout when the number of notes becomes too large for efficient access. In this case the first two hex digits of the note name will be used as a subdirectory name and the rest 38 hex digits as the file name under that directory. Similarly, when number of notes decreases a fanout tree may collapse back into a flat tree. The Git notes merge algorithm must take into account possibly different tree structures in different note branches and must properly match them against each other. Any conflict on a Git note is, by default, resolved by concatenating the two conflicting versions of the note. A delete-edit conflict is, by default, resolved by keeping the edit version. The note merge logic is pluggable and the caller may provide custom note merger that will perform different merging strategy. Additionally, it is possible to have non-note entries inside a notes tree. The merge algorithm must also take this fact into account and will try to merge such non-note entries. However, in case of any merge conflicts the merge operation will fail. Git notes merge algorithm is currently not trying to do content merge of non-note entries. Thanks to Shawn Pearce for patiently answering my questions related to this topic, giving hints and providing code snippets. Change-Id: I3b2335c76c766fd7ea25752e54087f9b19d69c88 Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
13 years ago
maxObjectSizeLimit for receive-pack. ReceivePack (and PackParser) can be configured with the maxObjectSizeLimit in order to prevent users from pushing too large objects to Git. The limit check is applied to all object types although it is most likely that a BLOB will exceed the limit. In all cases the size of the object header is excluded from the object size which is checked against the limit as this is the size of which a BLOB object would take in the working tree when checked out as a file. When an object exceeds the maxObjectSizeLimit the receive-pack will abort immediately. Delta objects (both offset and ref delta) are also checked against the limit. However, for delta objects we will first check the size of the inflated delta block against the maxObjectSizeLimit and abort immediately if it exceeds the limit. In this case we even do not know the exact size of the resolved delta object but we assume it will be larger than the given maxObjectSizeLimit as delta is generally only chosen if the delta can copy more data from the base object than the delta needs to insert or needs to represent the copy ranges. Aborting early, in this case, avoids unnecessary inflating of the (huge) delta block. Unfortunately, it is too expensive (especially for a large delta) to compute SHA-1 of an object that causes the receive-pack to abort. This would decrease the value of this feature whose main purpose is to protect server resources from users pushing huge objects. Therefore we don't report the SHA-1 in the error message. Change-Id: I177ef24553faacda444ed5895e40ac8925ca0d1e Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com> Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
12 years ago
Implement similarity based rename detection Content similarity based rename detection is performed only after a linear time detection is performed using exact content match on the ObjectIds. Any names which were paired up during that exact match phase are excluded from the inexact similarity based rename, which reduces the space that must be considered. During rename detection two entries cannot be marked as a rename if they are different types of files. This prevents a symlink from being renamed to a regular file, even if their blob content appears to be similar, or is identical. Efficiently comparing two files is performed by building up two hash indexes and hashing lines or short blocks from each file, counting the number of bytes that each line or block represents. Instead of using a standard java.util.HashMap, we use a custom open hashing scheme similiar to what we use in ObjecIdSubclassMap. This permits us to have a very light-weight hash, with very little memory overhead per cell stored. As we only need two ints per record in the map (line/block key and number of bytes), we collapse them into a single long inside of a long array, making very efficient use of available memory when we create the index table. We only need object headers for the index structure itself, and the index table, but not per-cell. This offers a massive space savings over using java.util.HashMap. The score calculation is done by approximating how many bytes are the same between the two inputs (which for a delta would be how much is copied from the base into the result). The score is derived by dividing the approximate number of bytes in common into the length of the larger of the two input files. Right now the SimilarityIndex table should average about 1/2 full, which means we waste about 50% of our memory on empty entries after we are done indexing a file and sort the table's contents. If memory becomes an issue we could discard the table and copy all records over to a new array that is properly sized. Building the index requires O(M + N log N) time, where M is the size of the input file in bytes, and N is the number of unique lines/blocks in the file. The N log N time constraint comes from the sort of the index table that is necessary to perform linear time matching against another SimilarityIndex created for a different file. To actually perform the rename detection, a SxD matrix is created, placing the sources (aka deletions) along one dimension and the destinations (aka additions) along the other. A simple O(S x D) loop examines every cell in this matrix. A SimilarityIndex is built along the row and reused for each column compare along that row, avoiding the costly index rebuild at the row level. A future improvement would be to load a smaller square matrix into SimilarityIndexes and process everything in that sub-matrix before discarding the column dimension and moving down to the next sub-matrix block along that same grid of rows. An optional ProgressMonitor is permitted to be passed in, allowing applications to see the progress of the detector as it works through the matrix cells. This provides some indication of current status for very long running renames. The default line/block hash function used by the SimilarityIndex may not be optimal, and may produce too many collisions. It is borrowed from RawText's hash, which is used to quickly skip out of a longer equality test if two lines have different hash functions. We may need to refine this hash in the future, in order to minimize the number of collisions we get on common source files. Based on a handful of test commits in JGit (especially my own recent rename repository refactoring series), this rename detector produces output that is very close to C Git. The content similarity scores are sometimes off by 1%, which is most probably caused by our SimilarityIndex type using a different hash function than C Git uses when it computes the delta size between any two objects in the rename matrix. Bug: 318504 Change-Id: I11dff969e8a2e4cf252636d857d2113053bdd9dc Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
14 years ago
Increase core.streamFileThreshold default to 50 MiB Projects like org.eclipse.mdt contain large XML files about 6 MiB in size. So does the Android project platform/frameworks/base. Doing a clone of either project with JGit takes forever to checkout the files into the working directory, because delta decompression tends to be very expensive as we need to constantly reposition the base stream for each copy instruction. This can be made worse by a very bad ordering of offsets, possibly due to an XML editor that doesn't preserve the order of elements in the file very well. Increasing the threshold to the same limit PackWriter uses when doing delta compression (50 MiB) permits a default configured JGit to decompress these XML file objects using the faster random-access arrays, rather than re-seeking through an inflate stream, significantly reducing checkout time after a clone. Since this new limit may be dangerously close to the JVM maximum heap size, every allocation attempt is now wrapped in a try/catch so that JGit can degrade by switching to the large object stream mode when the allocation is refused. It will run slower, but the operation will still complete. The large stream mode will run very well for big objects that aren't delta compressed, and is acceptable for delta compressed objects that are using only forward referencing copy instructions. Copies using prior offsets are still going to be horrible, and there is nothing we can do about it except increase core.streamFileThreshold. We might in the future want to consider changing the way the delta generators work in JGit and native C Git to avoid prior offsets once an object reaches a certain size, even if that causes the delta instruction stream to be slightly larger. Unfortunately native C Git won't want to do that until its also able to stream objects rather than malloc them as contiguous blocks. Change-Id: Ief7a3896afce15073e80d3691bed90c6a3897307 Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
13 years ago
Implement similarity based rename detection Content similarity based rename detection is performed only after a linear time detection is performed using exact content match on the ObjectIds. Any names which were paired up during that exact match phase are excluded from the inexact similarity based rename, which reduces the space that must be considered. During rename detection two entries cannot be marked as a rename if they are different types of files. This prevents a symlink from being renamed to a regular file, even if their blob content appears to be similar, or is identical. Efficiently comparing two files is performed by building up two hash indexes and hashing lines or short blocks from each file, counting the number of bytes that each line or block represents. Instead of using a standard java.util.HashMap, we use a custom open hashing scheme similiar to what we use in ObjecIdSubclassMap. This permits us to have a very light-weight hash, with very little memory overhead per cell stored. As we only need two ints per record in the map (line/block key and number of bytes), we collapse them into a single long inside of a long array, making very efficient use of available memory when we create the index table. We only need object headers for the index structure itself, and the index table, but not per-cell. This offers a massive space savings over using java.util.HashMap. The score calculation is done by approximating how many bytes are the same between the two inputs (which for a delta would be how much is copied from the base into the result). The score is derived by dividing the approximate number of bytes in common into the length of the larger of the two input files. Right now the SimilarityIndex table should average about 1/2 full, which means we waste about 50% of our memory on empty entries after we are done indexing a file and sort the table's contents. If memory becomes an issue we could discard the table and copy all records over to a new array that is properly sized. Building the index requires O(M + N log N) time, where M is the size of the input file in bytes, and N is the number of unique lines/blocks in the file. The N log N time constraint comes from the sort of the index table that is necessary to perform linear time matching against another SimilarityIndex created for a different file. To actually perform the rename detection, a SxD matrix is created, placing the sources (aka deletions) along one dimension and the destinations (aka additions) along the other. A simple O(S x D) loop examines every cell in this matrix. A SimilarityIndex is built along the row and reused for each column compare along that row, avoiding the costly index rebuild at the row level. A future improvement would be to load a smaller square matrix into SimilarityIndexes and process everything in that sub-matrix before discarding the column dimension and moving down to the next sub-matrix block along that same grid of rows. An optional ProgressMonitor is permitted to be passed in, allowing applications to see the progress of the detector as it works through the matrix cells. This provides some indication of current status for very long running renames. The default line/block hash function used by the SimilarityIndex may not be optimal, and may produce too many collisions. It is borrowed from RawText's hash, which is used to quickly skip out of a longer equality test if two lines have different hash functions. We may need to refine this hash in the future, in order to minimize the number of collisions we get on common source files. Based on a handful of test commits in JGit (especially my own recent rename repository refactoring series), this rename detector produces output that is very close to C Git. The content similarity scores are sometimes off by 1%, which is most probably caused by our SimilarityIndex type using a different hash function than C Git uses when it computes the delta size between any two objects in the rename matrix. Bug: 318504 Change-Id: I11dff969e8a2e4cf252636d857d2113053bdd9dc Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
14 years ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548
  1. abbreviationLengthMustBeNonNegative=Abbreviation length must not be negative.
  2. abortingRebase=Aborting rebase: resetting to {0}
  3. abortingRebaseFailed=Could not abort rebase
  4. abortingRebaseFailedNoOrigHead=Could not abort rebase since ORIG_HEAD is null
  5. advertisementCameBefore=advertisement of {0}^{} came before {1}
  6. advertisementOfCameBefore=advertisement of {0}^{} came before {1}
  7. amazonS3ActionFailed={0} of ''{1}'' failed: {2} {3}
  8. amazonS3ActionFailedGivingUp={0} of ''{1}'' failed: Giving up after {2} attempts.
  9. ambiguousObjectAbbreviation=Object abbreviation {0} is ambiguous
  10. aNewObjectIdIsRequired=A NewObjectId is required.
  11. anExceptionOccurredWhileTryingToAddTheIdOfHEAD=An exception occurred while trying to add the Id of HEAD
  12. anSSHSessionHasBeenAlreadyCreated=An SSH session has been already created
  13. applyingCommit=Applying {0}
  14. atLeastOnePathIsRequired=At least one path is required.
  15. atLeastOnePatternIsRequired=At least one pattern is required.
  16. atLeastTwoFiltersNeeded=At least two filters needed.
  17. authenticationNotSupported=authentication not supported
  18. badBase64InputCharacterAt=Bad Base64 input character at {0} : {1} (decimal)
  19. badEntryDelimiter=Bad entry delimiter
  20. badEntryName=Bad entry name: {0}
  21. badEscape=Bad escape: {0}
  22. badGroupHeader=Bad group header
  23. badObjectType=Bad object type: {0}
  24. badSectionEntry=Bad section entry: {0}
  25. bareRepositoryNoWorkdirAndIndex=Bare Repository has neither a working tree, nor an index
  26. base64InputNotProperlyPadded=Base64 input not properly padded.
  27. baseLengthIncorrect=base length incorrect
  28. blameNotCommittedYet=Not Committed Yet
  29. blobNotFound=Blob not found: {0}
  30. blobNotFoundForPath=Blob not found: {0} for path: {1}
  31. branchNameInvalid=Branch name {0} is not allowed
  32. cachedPacksPreventsIndexCreation=Using cached packs prevents index creation
  33. cachedPacksPreventsListingObjects=Using cached packs prevents listing objects
  34. cannotBeCombined=Cannot be combined.
  35. cannotBeRecursiveWhenTreesAreIncluded=TreeWalk shouldn't be recursive when tree objects are included.
  36. cannotCombineSquashWithNoff=Cannot combine --squash with --no-ff.
  37. cannotCombineTreeFilterWithRevFilter=Cannot combine TreeFilter {0} with RevFilter {1}.
  38. cannotCommitOnARepoWithState=Cannot commit on a repo with state: {0}
  39. cannotCommitWriteTo=Cannot commit write to {0}
  40. cannotConnectPipes=cannot connect pipes
  41. cannotConvertScriptToText=Cannot convert script to text
  42. cannotCreateConfig=cannot create config
  43. cannotCreateDirectory=Cannot create directory {0}
  44. cannotCreateHEAD=cannot create HEAD
  45. cannotCreateIndexfile=Cannot create an index file with name {0}
  46. cannotDeleteCheckedOutBranch=Branch {0} is checked out and can not be deleted
  47. cannotDeleteFile=Cannot delete file: {0}
  48. cannotDeleteStaleTrackingRef=Cannot delete stale tracking ref {0}
  49. cannotDeleteStaleTrackingRef2=Cannot delete stale tracking ref {0}: {1}
  50. cannotDetermineProxyFor=Cannot determine proxy for {0}
  51. cannotDownload=Cannot download {0}
  52. cannotExecute=cannot execute: {0}
  53. cannotGet=Cannot get {0}
  54. cannotListRefs=cannot list refs
  55. cannotLock=Cannot lock {0}
  56. cannotLockPackIn=Cannot lock pack in {0}
  57. cannotMatchOnEmptyString=Cannot match on empty string.
  58. cannotMoveIndexTo=Cannot move index to {0}
  59. cannotMovePackTo=Cannot move pack to {0}
  60. cannotOpenService=cannot open {0}
  61. cannotParseDate=The date specification "{0}" could not be parsed with the following formats: {1}
  62. cannotParseGitURIish=Cannot parse Git URI-ish
  63. cannotPullOnARepoWithState=Cannot pull into a repository with state: {0}
  64. cannotRead=Cannot read {0}
  65. cannotReadBlob=Cannot read blob {0}
  66. cannotReadCommit=Cannot read commit {0}
  67. cannotReadFile=Cannot read file {0}
  68. cannotReadHEAD=cannot read HEAD: {0} {1}
  69. cannotReadObject=Cannot read object
  70. cannotReadTree=Cannot read tree {0}
  71. cannotRebaseWithoutCurrentHead=Can not rebase without a current HEAD
  72. cannotResolveLocalTrackingRefForUpdating=Cannot resolve local tracking ref {0} for updating.
  73. cannotStoreObjects=cannot store objects
  74. cannotUnloadAModifiedTree=Cannot unload a modified tree.
  75. cannotWorkWithOtherStagesThanZeroRightNow=Cannot work with other stages than zero right now. Won't write corrupt index.
  76. canOnlyCherryPickCommitsWithOneParent=Cannot cherry-pick commit ''{0}'' because it has {1} parents, only commits with exactly one parent are supported.
  77. canOnlyRevertCommitsWithOneParent=Cannot revert commit ''{0}'' because it has {1} parents, only commits with exactly one parent are supported
  78. cantFindObjectInReversePackIndexForTheSpecifiedOffset=Can't find object in (reverse) pack index for the specified offset {0}
  79. cantPassMeATree=Can't pass me a tree!
  80. channelMustBeInRange0_255=channel {0} must be in range [0, 255]
  81. characterClassIsNotSupported=The character class {0} is not supported.
  82. checkoutConflictWithFile=Checkout conflict with file: {0}
  83. checkoutConflictWithFiles=Checkout conflict with files: {0}
  84. checkoutUnexpectedResult=Checkout returned unexpected result {0}
  85. classCastNotA=Not a {0}
  86. cloneNonEmptyDirectory=Destination path "{0}" already exists and is not an empty directory
  87. collisionOn=Collision on {0}
  88. commandWasCalledInTheWrongState=Command {0} was called in the wrong state
  89. commitAlreadyExists=exists {0}
  90. commitMessageNotSpecified=commit message not specified
  91. commitOnRepoWithoutHEADCurrentlyNotSupported=Commit on repo without HEAD currently not supported
  92. commitAmendOnInitialNotPossible=Amending is not possible on initial commit.
  93. compressingObjects=Compressing objects
  94. connectionFailed=connection failed
  95. connectionTimeOut=Connection time out: {0}
  96. contextMustBeNonNegative=context must be >= 0
  97. corruptionDetectedReReadingAt=Corruption detected re-reading at {0}
  98. corruptObjectBadStream=bad stream
  99. corruptObjectBadStreamCorruptHeader=bad stream, corrupt header
  100. corruptObjectGarbageAfterSize=garbage after size
  101. corruptObjectIncorrectLength=incorrect length
  102. corruptObjectInvalidEntryMode=invalid entry mode
  103. corruptObjectInvalidMode=invalid mode
  104. corruptObjectInvalidMode2=invalid mode {0}
  105. corruptObjectInvalidMode3=invalid mode {0} for {1} ''{2}'' in {3}.
  106. corruptObjectInvalidType=invalid type
  107. corruptObjectInvalidType2=invalid type {0}
  108. corruptObjectMalformedHeader=malformed header: {0}
  109. corruptObjectNegativeSize=negative size
  110. corruptObjectNoAuthor=no author
  111. corruptObjectNoCommitter=no committer
  112. corruptObjectNoHeader=no header
  113. corruptObjectNoObject=no object
  114. corruptObjectNoTaggerBadHeader=no tagger/bad header
  115. corruptObjectNoTaggerHeader=no tagger header
  116. corruptObjectNoTagName=no tag name
  117. corruptObjectNotree=no tree
  118. corruptObjectNoType=no type
  119. corruptObjectPackfileChecksumIncorrect=Packfile checksum incorrect.
  120. couldNotCheckOutBecauseOfConflicts=Could not check out because of conflicts
  121. couldNotDeleteLockFileShouldNotHappen=Could not delete lock file. Should not happen
  122. couldNotDeleteTemporaryIndexFileShouldNotHappen=Could not delete temporary index file. Should not happen
  123. couldNotGetAdvertisedRef=Could not get advertised Ref for branch {0}
  124. couldNotLockHEAD=Could not lock HEAD
  125. couldNotReadIndexInOneGo=Could not read index in one go, only {0} out of {1} read
  126. couldNotReadObjectWhileParsingCommit=Could not read an object while parsing commit {0}
  127. couldNotRenameDeleteOldIndex=Could not rename delete old index
  128. couldNotRenameTemporaryFile=Could not rename temporary file {0} to new location {1}
  129. couldNotRenameTemporaryIndexFileToIndex=Could not rename temporary index file to index
  130. couldNotURLEncodeToUTF8=Could not URL encode to UTF-8
  131. couldNotWriteFile=Could not write file {0}
  132. countingObjects=Counting objects
  133. createBranchFailedUnknownReason=Create branch failed for unknown reason
  134. createBranchUnexpectedResult=Create branch returned unexpected result {0}
  135. createNewFileFailed=Could not create new file {0}
  136. credentialPassword=Password
  137. credentialUsername=Username
  138. daemonAlreadyRunning=Daemon already running
  139. daysAgo={0} days ago
  140. deleteBranchUnexpectedResult=Delete branch returned unexpected result {0}
  141. deleteFileFailed=Could not delete file {0}
  142. deleteTagUnexpectedResult=Delete tag returned unexpected result {0}
  143. deletingNotSupported=Deleting {0} not supported.
  144. destinationIsNotAWildcard=Destination is not a wildcard.
  145. detachedHeadDetected=HEAD is detached
  146. dirCacheDoesNotHaveABackingFile=DirCache does not have a backing file
  147. dirCacheFileIsNotLocked=DirCache {0} not locked
  148. dirCacheIsNotLocked=DirCache is not locked
  149. DIRCChecksumMismatch=DIRC checksum mismatch
  150. DIRCExtensionIsTooLargeAt=DIRC extension {0} is too large at {1} bytes.
  151. DIRCExtensionNotSupportedByThisVersion=DIRC extension {0} not supported by this version.
  152. DIRCHasTooManyEntries=DIRC has too many entries.
  153. DIRCUnrecognizedExtendedFlags=Unrecognized extended flags: {0}
  154. dirtyFilesExist=Dirty files exist. Refusing to merge
  155. doesNotHandleMode=Does not handle mode {0} ({1})
  156. downloadCancelled=Download cancelled
  157. downloadCancelledDuringIndexing=Download cancelled during indexing
  158. duplicateAdvertisementsOf=duplicate advertisements of {0}
  159. duplicateRef=Duplicate ref: {0}
  160. duplicateRemoteRefUpdateIsIllegal=Duplicate remote ref update is illegal. Affected remote name: {0}
  161. duplicateStagesNotAllowed=Duplicate stages not allowed
  162. eitherGitDirOrWorkTreeRequired=One of setGitDir or setWorkTree must be called.
  163. emptyCommit=No changes
  164. emptyPathNotPermitted=Empty path not permitted.
  165. encryptionError=Encryption error: {0}
  166. endOfFileInEscape=End of file in escape
  167. entryNotFoundByPath=Entry not found by path: {0}
  168. enumValueNotSupported2=Invalid value: {0}.{1}={2}
  169. enumValueNotSupported3=Invalid value: {0}.{1}.{2}={3}
  170. enumValuesNotAvailable=Enumerated values of type {0} not available
  171. errorDecodingFromFile=Error decoding from file {0}
  172. errorEncodingFromFile=Error encoding from file {0}
  173. errorInBase64CodeReadingStream=Error in Base64 code reading stream.
  174. errorInPackedRefs=error in packed-refs
  175. errorInvalidProtocolWantedOldNewRef=error: invalid protocol: wanted 'old new ref'
  176. errorListing=Error listing {0}
  177. errorOccurredDuringUnpackingOnTheRemoteEnd=error occurred during unpacking on the remote end: {0}
  178. errorReadingInfoRefs=error reading info/refs
  179. exceptionCaughtDuringExecutionOfAddCommand=Exception caught during execution of add command
  180. exceptionCaughtDuringExecutionOfCherryPickCommand=Exception caught during execution of cherry-pick command. {0}
  181. exceptionCaughtDuringExecutionOfCommitCommand=Exception caught during execution of commit command
  182. exceptionCaughtDuringExecutionOfFetchCommand=Exception caught during execution of fetch command
  183. exceptionCaughtDuringExecutionOfLsRemoteCommand=Exception caught during execution of ls-remote command
  184. exceptionCaughtDuringExecutionOfMergeCommand=Exception caught during execution of merge command. {0}
  185. exceptionCaughtDuringExecutionOfPullCommand=Exception caught during execution of pull command
  186. exceptionCaughtDuringExecutionOfPushCommand=Exception caught during execution of push command
  187. exceptionCaughtDuringExecutionOfResetCommand=Exception caught during execution of reset command. {0}
  188. exceptionCaughtDuringExecutionOfRevertCommand=Exception caught during execution of revert command. {0}
  189. exceptionCaughtDuringExecutionOfRmCommand=Exception caught during execution of rm command
  190. exceptionCaughtDuringExecutionOfTagCommand=Exception caught during execution of tag command
  191. exceptionOccurredDuringAddingOfOptionToALogCommand=Exception occurred during adding of {0} as option to a Log command
  192. exceptionOccurredDuringReadingOfGIT_DIR=Exception occurred during reading of $GIT_DIR/{0}. {1}
  193. expectedACKNAKFoundEOF=Expected ACK/NAK, found EOF
  194. expectedACKNAKGot=Expected ACK/NAK, got: {0}
  195. expectedBooleanStringValue=Expected boolean string value
  196. expectedCharacterEncodingGuesses=Expected {0} character encoding guesses
  197. expectedEOFReceived=expected EOF; received ''{0}'' instead
  198. expectedGot=expected ''{0}'', got ''{1}''
  199. expectedPktLineWithService=expected pkt-line with '# service=-', got ''{0}''
  200. expectedReceivedContentType=expected Content-Type {0}; received Content-Type {1}
  201. expectedReportForRefNotReceived={0}: expected report for ref {1} not received
  202. failedUpdatingRefs=failed updating refs
  203. failureDueToOneOfTheFollowing=Failure due to one of the following:
  204. failureUpdatingFETCH_HEAD=Failure updating FETCH_HEAD: {0}
  205. failureUpdatingTrackingRef=Failure updating tracking ref {0}: {1}
  206. fileCannotBeDeleted=File cannot be deleted: {0}
  207. fileIsTooBigForThisConvenienceMethod=File is too big for this convenience method ({0} bytes).
  208. fileIsTooLarge=File is too large: {0}
  209. fileModeNotSetForPath=FileMode not set for path {0}
  210. flagIsDisposed={0} is disposed.
  211. flagNotFromThis={0} not from this.
  212. flagsAlreadyCreated={0} flags already created.
  213. funnyRefname=funny refname
  214. gcFailed=Garbage collection failed.
  215. gitmodulesNotFound=.gitmodules not found in tree.
  216. headRequiredToStash=HEAD required to stash local changes
  217. hoursAgo={0} hours ago
  218. hugeIndexesAreNotSupportedByJgitYet=Huge indexes are not supported by jgit, yet
  219. hunkBelongsToAnotherFile=Hunk belongs to another file
  220. hunkDisconnectedFromFile=Hunk disconnected from file
  221. hunkHeaderDoesNotMatchBodyLineCountOf=Hunk header {0} does not match body line count of {1}
  222. illegalArgumentNotA=Not {0}
  223. illegalCombinationOfArguments=The combination of arguments {0} and {1} is not allowed
  224. illegalPackingPhase=Illegal packing phase {0}
  225. illegalStateExists=exists {0}
  226. improperlyPaddedBase64Input=Improperly padded Base64 input.
  227. incorrectHashFor=Incorrect hash for {0}; computed {1} as a {2} from {3} bytes.
  228. incorrectOBJECT_ID_LENGTH=Incorrect OBJECT_ID_LENGTH.
  229. indexFileIsInUse=Index file is in use
  230. indexFileIsTooLargeForJgit=Index file is too large for jgit
  231. indexSignatureIsInvalid=Index signature is invalid: {0}
  232. indexWriteException=Modified index could not be written
  233. inMemoryBufferLimitExceeded=In-memory buffer limit exceeded
  234. inputStreamMustSupportMark=InputStream must support mark()
  235. integerValueOutOfRange=Integer value {0}.{1} out of range
  236. internalRevisionError=internal revision error
  237. internalServerError=internal server error
  238. interruptedWriting=Interrupted writing {0}
  239. inTheFuture=in the future
  240. invalidAdvertisementOf=invalid advertisement of {0}
  241. invalidAncestryLength=Invalid ancestry length
  242. invalidBooleanValue=Invalid boolean value: {0}.{1}={2}
  243. invalidChannel=Invalid channel {0}
  244. invalidCharacterInBase64Data=Invalid character in Base64 data.
  245. invalidCommitParentNumber=Invalid commit parent number
  246. invalidEncryption=Invalid encryption
  247. invalidGitdirRef = Invalid .git reference in file ''{0}''
  248. invalidGitType=invalid git type: {0}
  249. invalidId=Invalid id {0}
  250. invalidIdLength=Invalid id length {0}; should be {1}
  251. invalidIntegerValue=Invalid integer value: {0}.{1}={2}
  252. invalidKey=Invalid key: {0}
  253. invalidLineInConfigFile=Invalid line in config file
  254. invalidModeFor=Invalid mode {0} for {1} {2} in {3}.
  255. invalidModeForPath=Invalid mode {0} for path {1}
  256. invalidObject=Invalid {0} {1}:{2}
  257. invalidOldIdSent=invalid old id sent
  258. invalidPacketLineHeader=Invalid packet line header: {0}
  259. invalidPath=Invalid path: {0}
  260. invalidReflogRevision=Invalid reflog revision: {0}
  261. invalidRefName=Invalid ref name: {0}
  262. invalidRemote=Invalid remote: {0}
  263. invalidStageForPath=Invalid stage {0} for path {1}
  264. invalidTagOption=Invalid tag option: {0}
  265. invalidTimeout=Invalid timeout: {0}
  266. invalidURL=Invalid URL {0}
  267. invalidWildcards=Invalid wildcards {0}
  268. invalidWindowSize=Invalid window size
  269. isAStaticFlagAndHasNorevWalkInstance={0} is a static flag and has no RevWalk instance
  270. JRELacksMD5Implementation=JRE lacks MD5 implementation
  271. kNotInRange=k {0} not in {1} - {2}
  272. largeObjectExceedsByteArray=Object {0} exceeds 2 GiB byte array limit
  273. largeObjectExceedsLimit=Object {0} exceeds {1} limit, actual size is {2}
  274. largeObjectException={0} exceeds size limit
  275. largeObjectOutOfMemory=Out of memory loading {0}
  276. lengthExceedsMaximumArraySize=Length exceeds maximum array size
  277. listingAlternates=Listing alternates
  278. localObjectsIncomplete=Local objects incomplete.
  279. localRefIsMissingObjects=Local ref {0} is missing object(s).
  280. lockCountMustBeGreaterOrEqual1=lockCount must be >= 1
  281. lockError=lock error: {0}
  282. lockOnNotClosed=Lock on {0} not closed.
  283. lockOnNotHeld=Lock on {0} not held.
  284. malformedpersonIdentString=Malformed PersonIdent string (no < was found): {0}
  285. maxCountMustBeNonNegative=max count must be >= 0
  286. mergeConflictOnNonNoteEntries=Merge conflict on non-note entries: base = {0}, ours = {1}, theirs = {2}
  287. mergeConflictOnNotes=Merge conflict on note {0}. base = {1}, ours = {2}, theirs = {2}
  288. mergeStrategyAlreadyExistsAsDefault=Merge strategy "{0}" already exists as a default strategy
  289. mergeStrategyDoesNotSupportHeads=merge strategy {0} does not support {1} heads to be merged into HEAD
  290. mergeUsingStrategyResultedInDescription=Merge of revisions {0} with base {1} using strategy {2} resulted in: {3}. {4}
  291. mergeRecursiveReturnedNoCommit=Merge returned no commit:\n Depth {0}\n Head one {1}\n Head two {2}
  292. mergeRecursiveTooManyMergeBasesFor = "More than {0} merge bases for:\n a {1}\n b {2} found:\n count {3}"
  293. minutesAgo={0} minutes ago
  294. missingAccesskey=Missing accesskey.
  295. missingConfigurationForKey=No value for key {0} found in configuration
  296. missingDeltaBase=delta base
  297. missingForwardImageInGITBinaryPatch=Missing forward-image in GIT binary patch
  298. missingObject=Missing {0} {1}
  299. missingPrerequisiteCommits=missing prerequisite commits:
  300. missingRequiredParameter=Parameter "{0}" is missing
  301. missingSecretkey=Missing secretkey.
  302. mixedStagesNotAllowed=Mixed stages not allowed
  303. mkDirFailed=Creating directory {0} failed
  304. mkDirsFailed=Creating directories for {0} failed
  305. month=month
  306. months=months
  307. monthsAgo={0} months ago
  308. multipleMergeBasesFor=Multiple merge bases for:\n {0}\n {1} found:\n {2}\n {3}
  309. need2Arguments=Need 2 arguments
  310. needPackOut=need packOut
  311. needsAtLeastOneEntry=Needs at least one entry
  312. needsWorkdir=Needs workdir
  313. newlineInQuotesNotAllowed=Newline in quotes not allowed
  314. noApplyInDelete=No apply in delete
  315. noClosingBracket=No closing {0} found for {1} at index {2}.
  316. noHEADExistsAndNoExplicitStartingRevisionWasSpecified=No HEAD exists and no explicit starting revision was specified
  317. noHMACsupport=No {0} support: {1}
  318. noMergeBase=No merge base could be determined. Reason={0}. {1}
  319. noMergeHeadSpecified=No merge head specified
  320. noSuchRef=no such ref
  321. notABoolean=Not a boolean: {0}
  322. notABundle=not a bundle
  323. notADIRCFile=Not a DIRC file.
  324. notAGitDirectory=not a git directory
  325. notAPACKFile=Not a PACK file.
  326. notARef=Not a ref: {0}: {1}
  327. notASCIIString=Not ASCII string: {0}
  328. notAuthorized=not authorized
  329. notAValidPack=Not a valid pack {0}
  330. notFound=not found.
  331. nothingToFetch=Nothing to fetch.
  332. nothingToPush=Nothing to push.
  333. notMergedExceptionMessage=Branch was not deleted as it has not been merged yet; use the force option to delete it anyway
  334. noXMLParserAvailable=No XML parser available.
  335. objectAtHasBadZlibStream=Object at {0} in {1} has bad zlib stream
  336. objectAtPathDoesNotHaveId=Object at path "{0}" does not have an id assigned. All object ids must be assigned prior to writing a tree.
  337. objectIsCorrupt=Object {0} is corrupt: {1}
  338. objectIsNotA=Object {0} is not a {1}.
  339. objectNotFoundIn=Object {0} not found in {1}.
  340. obtainingCommitsForCherryPick=Obtaining commits that need to be cherry-picked
  341. offsetWrittenDeltaBaseForObjectNotFoundInAPack=Offset-written delta base for object not found in a pack
  342. onlyAlreadyUpToDateAndFastForwardMergesAreAvailable=only already-up-to-date and fast forward merges are available
  343. onlyOneFetchSupported=Only one fetch supported
  344. onlyOneOperationCallPerConnectionIsSupported=Only one operation call per connection is supported.
  345. openFilesMustBeAtLeast1=Open files must be >= 1
  346. openingConnection=Opening connection
  347. operationCanceled=Operation {0} was canceled
  348. outputHasAlreadyBeenStarted=Output has already been started.
  349. packChecksumMismatch=Pack checksum mismatch
  350. packCorruptedWhileWritingToFilesystem=Pack corrupted while writing to filesystem
  351. packDoesNotMatchIndex=Pack {0} does not match index
  352. packetSizeMustBeAtLeast=packet size {0} must be >= {1}
  353. packetSizeMustBeAtMost=packet size {0} must be <= {1}
  354. packfileCorruptionDetected=Packfile corruption detected: {0}
  355. packFileInvalid=Pack file invalid: {0}
  356. packfileIsTruncated=Packfile is truncated.
  357. packHasUnresolvedDeltas=pack has unresolved deltas
  358. packingCancelledDuringObjectsWriting=Packing cancelled during objects writing
  359. packObjectCountMismatch=Pack object count mismatch: pack {0} index {1}: {2}
  360. packRefs=Pack refs
  361. packTooLargeForIndexVersion1=Pack too large for index version 1
  362. packWriterStatistics=Total {0,number,#0} (delta {1,number,#0}), reused {2,number,#0} (delta {3,number,#0})
  363. panicCantRenameIndexFile=Panic: index file {0} must be renamed to replace {1}; until then repository is corrupt
  364. patchApplyException=Cannot apply: {0}
  365. patchFormatException=Format error: {0}
  366. pathIsNotInWorkingDir=Path is not in working dir
  367. pathNotConfigured=Submodule path is not configured
  368. peeledLineBeforeRef=Peeled line before ref.
  369. peerDidNotSupplyACompleteObjectGraph=peer did not supply a complete object graph
  370. prefixRemote=remote:
  371. problemWithResolvingPushRefSpecsLocally=Problem with resolving push ref specs locally: {0}
  372. progressMonUploading=Uploading {0}
  373. propertyIsAlreadyNonNull=Property is already non null
  374. pruneLoosePackedObjects=Prune loose objects also found in pack files
  375. pruneLooseUnreferencedObjects=Prune loose, unreferenced objects
  376. pullOnRepoWithoutHEADCurrentlyNotSupported=Pull on repository without HEAD currently not supported
  377. pullTaskName=Pull
  378. pushCancelled=push cancelled
  379. pushIsNotSupportedForBundleTransport=Push is not supported for bundle transport
  380. pushNotPermitted=push not permitted
  381. rawLogMessageDoesNotParseAsLogEntry=Raw log message does not parse as log entry
  382. readingObjectsFromLocalRepositoryFailed=reading objects from local repository failed: {0}
  383. readTimedOut=Read timed out
  384. receivePackObjectTooLarge1=Object too large, rejecting the pack. Max object size limit is {0} bytes.
  385. receivePackObjectTooLarge2=Object too large ({0} bytes), rejecting the pack. Max object size limit is {1} bytes.
  386. receivingObjects=Receiving objects
  387. refAlreadyExists=already exists
  388. refAlreadyExists1=Ref {0} already exists
  389. reflogEntryNotFound=Entry {0} not found in reflog for ''{1}''
  390. refNotResolved=Ref {0} can not be resolved
  391. refUpdateReturnCodeWas=RefUpdate return code was: {0}
  392. remoteConfigHasNoURIAssociated=Remote config "{0}" has no URIs associated
  393. remoteDoesNotHaveSpec=Remote does not have {0} available for fetch.
  394. remoteDoesNotSupportSmartHTTPPush=remote does not support smart HTTP push
  395. remoteHungUpUnexpectedly=remote hung up unexpectedly
  396. remoteNameCantBeNull=Remote name can't be null.
  397. renameBranchFailedBecauseTag=Can not rename as Ref {0} is a tag
  398. renameBranchFailedUnknownReason=Rename failed with unknown reason
  399. renameBranchUnexpectedResult=Unexpected rename result {0}
  400. renameFileFailed=Could not rename file {0} to {1}
  401. renamesAlreadyFound=Renames have already been found.
  402. renamesBreakingModifies=Breaking apart modified file pairs
  403. renamesFindingByContent=Finding renames by content similarity
  404. renamesFindingExact=Finding exact renames
  405. renamesRejoiningModifies=Rejoining modified file pairs
  406. repositoryAlreadyExists=Repository already exists: {0}
  407. repositoryConfigFileInvalid=Repository config file {0} invalid {1}
  408. repositoryIsRequired=Repository is required.
  409. repositoryNotFound=repository not found: {0}
  410. repositoryState_applyMailbox=Apply mailbox
  411. repositoryState_bisecting=Bisecting
  412. repositoryState_conflicts=Conflicts
  413. repositoryState_merged=Merged
  414. repositoryState_normal=Normal
  415. repositoryState_rebase=Rebase
  416. repositoryState_rebaseInteractive=Rebase interactive
  417. repositoryState_rebaseOrApplyMailbox=Rebase/Apply mailbox
  418. repositoryState_rebaseWithMerge=Rebase w/merge
  419. requiredHashFunctionNotAvailable=Required hash function {0} not available.
  420. resettingHead=Resetting head to {0}
  421. resolvingDeltas=Resolving deltas
  422. resultLengthIncorrect=result length incorrect
  423. rewinding=Rewinding to commit {0}
  424. searchForReuse=Finding sources
  425. searchForSizes=Getting sizes
  426. secondsAgo={0} seconds ago
  427. sequenceTooLargeForDiffAlgorithm=Sequence too large for difference algorithm.
  428. serviceNotEnabledNoName=Service not enabled
  429. serviceNotPermitted={0} not permitted
  430. serviceNotPermittedNoName=Service not permitted
  431. shallowCommitsAlreadyInitialized=Shallow commits have already been initialized
  432. shortCompressedStreamAt=Short compressed stream at {0}
  433. shortReadOfBlock=Short read of block.
  434. shortReadOfOptionalDIRCExtensionExpectedAnotherBytes=Short read of optional DIRC extension {0}; expected another {1} bytes within the section.
  435. shortSkipOfBlock=Short skip of block.
  436. signingNotSupportedOnTag=Signing isn't supported on tag operations yet.
  437. similarityScoreMustBeWithinBounds=Similarity score must be between 0 and 100.
  438. sizeExceeds2GB=Path {0} size {1} exceeds 2 GiB limit.
  439. skipMustBeNonNegative=skip must be >= 0
  440. smartHTTPPushDisabled=smart HTTP push disabled
  441. sourceDestinationMustMatch=Source/Destination must match.
  442. sourceIsNotAWildcard=Source is not a wildcard.
  443. sourceRefDoesntResolveToAnyObject=Source ref {0} doesn't resolve to any object.
  444. sourceRefNotSpecifiedForRefspec=Source ref not specified for refspec: {0}
  445. squashCommitNotUpdatingHEAD=Squash commit -- not updating HEAD
  446. staleRevFlagsOn=Stale RevFlags on {0}
  447. startingReadStageWithoutWrittenRequestDataPendingIsNotSupported=Starting read stage without written request data pending is not supported
  448. stashApplyConflict=Applying stashed changes resulted in a conflict
  449. stashApplyConflictInIndex=Applying stashed index changes resulted in a conflict. Dropped index changes.
  450. stashApplyFailed=Applying stashed changes did not successfully complete
  451. stashApplyOnUnsafeRepository=Cannot apply stashed commit on a repository with state: {0}
  452. stashApplyWithoutHead=Cannot apply stashed commit in an empty repository or onto an unborn branch
  453. stashCommitMissingTwoParents=Stashed commit ''{0}'' does not have two parent commits
  454. stashDropDeleteRefFailed=Deleting stash reference failed with result: {0}
  455. stashDropFailed=Dropping stashed commit failed
  456. stashDropMissingReflog=Stash reflog does not contain entry ''{0}''
  457. stashFailed=Stashing local changes did not successfully complete
  458. stashResolveFailed=Reference ''{0}'' does not resolve to stashed commit
  459. statelessRPCRequiresOptionToBeEnabled=stateless RPC requires {0} to be enabled
  460. submoduleExists=Submodule ''{0}'' already exists in the index
  461. submoduleParentRemoteUrlInvalid=Cannot remove segment from remote url ''{0}''
  462. submodulesNotSupported=Submodules are not supported
  463. symlinkCannotBeWrittenAsTheLinkTarget=Symlink "{0}" cannot be written as the link target cannot be read from within Java.
  464. systemConfigFileInvalid=Systen wide config file {0} is invalid {1}
  465. tagAlreadyExists=tag ''{0}'' already exists
  466. tagNameInvalid=tag name {0} is invalid
  467. tagOnRepoWithoutHEADCurrentlyNotSupported=Tag on repository without HEAD currently not supported
  468. theFactoryMustNotBeNull=The factory must not be null
  469. timerAlreadyTerminated=Timer already terminated
  470. topologicalSortRequired=Topological sort required.
  471. transportExceptionBadRef=Empty ref: {0}: {1}
  472. transportExceptionEmptyRef=Empty ref: {0}
  473. transportExceptionInvalid=Invalid {0} {1}:{2}
  474. transportExceptionMissingAssumed=Missing assumed {0}
  475. transportExceptionReadRef=read {0}
  476. transportNeedsRepository=Transport needs repository
  477. transportProtoAmazonS3=Amazon S3
  478. transportProtoBundleFile=Git Bundle File
  479. transportProtoFTP=FTP
  480. transportProtoGitAnon=Anonymous Git
  481. transportProtoHTTP=HTTP
  482. transportProtoLocal=Local Git Repository
  483. transportProtoSFTP=SFTP
  484. transportProtoSSH=SSH
  485. treeEntryAlreadyExists=Tree entry "{0}" already exists.
  486. treeFilterMarkerTooManyFilters=Too many markTreeFilters passed, maximum number is {0} (passed {1})
  487. treeIteratorDoesNotSupportRemove=TreeIterator does not support remove()
  488. treeWalkMustHaveExactlyTwoTrees=TreeWalk should have exactly two trees.
  489. truncatedHunkLinesMissingForAncestor=Truncated hunk, at least {0} lines missing for ancestor {1}
  490. truncatedHunkNewLinesMissing=Truncated hunk, at least {0} new lines is missing
  491. truncatedHunkOldLinesMissing=Truncated hunk, at least {0} old lines is missing
  492. tSizeMustBeGreaterOrEqual1=tSize must be >= 1
  493. unableToCheckConnectivity=Unable to check connectivity.
  494. unableToStore=Unable to store {0}.
  495. unableToWrite=Unable to write {0}
  496. unencodeableFile=Unencodeable file: {0}
  497. unexpectedCompareResult=Unexpected metadata comparison result: {0}
  498. unexpectedEndOfConfigFile=Unexpected end of config file
  499. unexpectedHunkTrailer=Unexpected hunk trailer
  500. unexpectedOddResult=odd: {0} + {1} - {2}
  501. unexpectedRefReport={0}: unexpected ref report: {1}
  502. unexpectedReportLine=unexpected report line: {0}
  503. unexpectedReportLine2={0} unexpected report line: {1}
  504. unknownOrUnsupportedCommand=Unknown or unsupported command "{0}", only "{1}" is allowed.
  505. unknownDIRCVersion=Unknown DIRC version {0}
  506. unknownHost=unknown host
  507. unknownIndexVersionOrCorruptIndex=Unknown index version (or corrupt index): {0}
  508. unknownObject=unknown object
  509. unknownObjectType=Unknown object type {0}.
  510. unknownRepositoryFormat=Unknown repository format
  511. unknownRepositoryFormat2=Unknown repository format "{0}"; expected "0".
  512. unknownZlibError=Unknown zlib error.
  513. unmergedPath=Unmerged path: {0}
  514. unmergedPaths=Repository contains unmerged paths
  515. unpackException=Exception while parsing pack stream
  516. unreadablePackIndex=Unreadable pack index: {0}
  517. unrecognizedRef=Unrecognized ref: {0}
  518. unsupportedCommand0=unsupported command 0
  519. unsupportedEncryptionAlgorithm=Unsupported encryption algorithm: {0}
  520. unsupportedEncryptionVersion=Unsupported encryption version: {0}
  521. unsupportedGC Unsupported garbage collector for repository type: {0}
  522. unsupportedOperationNotAddAtEnd=Not add-at-end: {0}
  523. unsupportedPackIndexVersion=Unsupported pack index version {0}
  524. unsupportedPackVersion=Unsupported pack version {0}.
  525. updatingReferences=Updating references
  526. updatingRefFailed=Updating the ref {0} to {1} failed. ReturnCode from RefUpdate.update() was {2}
  527. uriNotConfigured=Submodule URI not configured
  528. uriNotFound={0} not found
  529. URINotSupported=URI not supported: {0}
  530. URLNotFound={0} not found
  531. userConfigFileInvalid=User config file {0} invalid {1}
  532. walkFailure=Walk failure.
  533. wantNotValid=want {0} not valid
  534. weeksAgo={0} weeks ago
  535. windowSizeMustBeLesserThanLimit=Window size must be < limit
  536. windowSizeMustBePowerOf2=Window size must be power of 2
  537. writerAlreadyInitialized=Writer already initialized
  538. writeTimedOut=Write timed out
  539. writingNotPermitted=Writing not permitted
  540. writingNotSupported=Writing {0} not supported.
  541. writingObjects=Writing objects
  542. wrongDecompressedLength=wrong decompressed length
  543. wrongRepositoryState=Wrong Repository State: {0}
  544. year=year
  545. years=years
  546. years0MonthsAgo={0} {1} ago
  547. yearsAgo={0} years ago
  548. yearsMonthsAgo={0} {1}, {2} {3} ago