Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.

ReverseWalk.java 3.8KB

blame: Compute the origin of lines in a result file BlameGenerator digs through history and discovers the origin of each line of some result file. BlameResult consumes the stream of regions created by the generator and lays them out in a table for applications to display alongside of source lines. Applications may optionally push in the working tree copy of a file using the push(String, byte[]) method, allowing the application to receive accurate line annotations for the working tree version. Lines that are uncommitted (difference between HEAD and working tree) will show up with the description given by the application as the author, or "Not Committed Yet" as a default string. Applications may also run the BlameGenerator in reverse mode using the reverse(AnyObjectId, AnyObjectId) method instead of push(). When running in the reverse mode the generator annotates lines by the commit they are removed in, rather than the commit they were added in. This allows a user to discover where a line disappeared from when they are looking at an older revision in the repository. For example: blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java ( 1080) } 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081) 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /** 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file. Above we learn that line 1080 (a closing curly brace of the prior method) still exists in branch master, but the Javadoc comment below it has been removed by Christian Halstrick on May 20th as part of commit 2302a6d3. This result differs considerably from that of C Git's blame --reverse feature. JGit tells the reader which commit performed the delete, while C Git tells the reader the last commit that still contained the line, leaving it an exercise to the reader to discover the descendant that performed the removal. This is still only a basic implementation. Quite notably it is missing support for the smart block copy/move detection that the C implementation of `git blame` is well known for. Despite being incremental, the BlameGenerator can only be run once. After the generator runs it cannot be reused. A better implementation would support applications browsing through history efficiently. In regards to CQ 5110, only a little of the original code survives. CQ: 5110 Bug: 306161 Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f Signed-off-by: Kevin Sawicki <kevin@github.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
13 år sedan
blame: Compute the origin of lines in a result file BlameGenerator digs through history and discovers the origin of each line of some result file. BlameResult consumes the stream of regions created by the generator and lays them out in a table for applications to display alongside of source lines. Applications may optionally push in the working tree copy of a file using the push(String, byte[]) method, allowing the application to receive accurate line annotations for the working tree version. Lines that are uncommitted (difference between HEAD and working tree) will show up with the description given by the application as the author, or "Not Committed Yet" as a default string. Applications may also run the BlameGenerator in reverse mode using the reverse(AnyObjectId, AnyObjectId) method instead of push(). When running in the reverse mode the generator annotates lines by the commit they are removed in, rather than the commit they were added in. This allows a user to discover where a line disappeared from when they are looking at an older revision in the repository. For example: blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java ( 1080) } 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081) 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /** 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file. Above we learn that line 1080 (a closing curly brace of the prior method) still exists in branch master, but the Javadoc comment below it has been removed by Christian Halstrick on May 20th as part of commit 2302a6d3. This result differs considerably from that of C Git's blame --reverse feature. JGit tells the reader which commit performed the delete, while C Git tells the reader the last commit that still contained the line, leaving it an exercise to the reader to discover the descendant that performed the removal. This is still only a basic implementation. Quite notably it is missing support for the smart block copy/move detection that the C implementation of `git blame` is well known for. Despite being incremental, the BlameGenerator can only be run once. After the generator runs it cannot be reused. A better implementation would support applications browsing through history efficiently. In regards to CQ 5110, only a little of the original code survives. CQ: 5110 Bug: 306161 Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f Signed-off-by: Kevin Sawicki <kevin@github.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
13 år sedan
blame: Compute the origin of lines in a result file BlameGenerator digs through history and discovers the origin of each line of some result file. BlameResult consumes the stream of regions created by the generator and lays them out in a table for applications to display alongside of source lines. Applications may optionally push in the working tree copy of a file using the push(String, byte[]) method, allowing the application to receive accurate line annotations for the working tree version. Lines that are uncommitted (difference between HEAD and working tree) will show up with the description given by the application as the author, or "Not Committed Yet" as a default string. Applications may also run the BlameGenerator in reverse mode using the reverse(AnyObjectId, AnyObjectId) method instead of push(). When running in the reverse mode the generator annotates lines by the commit they are removed in, rather than the commit they were added in. This allows a user to discover where a line disappeared from when they are looking at an older revision in the repository. For example: blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java ( 1080) } 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081) 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /** 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file. Above we learn that line 1080 (a closing curly brace of the prior method) still exists in branch master, but the Javadoc comment below it has been removed by Christian Halstrick on May 20th as part of commit 2302a6d3. This result differs considerably from that of C Git's blame --reverse feature. JGit tells the reader which commit performed the delete, while C Git tells the reader the last commit that still contained the line, leaving it an exercise to the reader to discover the descendant that performed the removal. This is still only a basic implementation. Quite notably it is missing support for the smart block copy/move detection that the C implementation of `git blame` is well known for. Despite being incremental, the BlameGenerator can only be run once. After the generator runs it cannot be reused. A better implementation would support applications browsing through history efficiently. In regards to CQ 5110, only a little of the original code survives. CQ: 5110 Bug: 306161 Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f Signed-off-by: Kevin Sawicki <kevin@github.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
13 år sedan
blame: Compute the origin of lines in a result file BlameGenerator digs through history and discovers the origin of each line of some result file. BlameResult consumes the stream of regions created by the generator and lays them out in a table for applications to display alongside of source lines. Applications may optionally push in the working tree copy of a file using the push(String, byte[]) method, allowing the application to receive accurate line annotations for the working tree version. Lines that are uncommitted (difference between HEAD and working tree) will show up with the description given by the application as the author, or "Not Committed Yet" as a default string. Applications may also run the BlameGenerator in reverse mode using the reverse(AnyObjectId, AnyObjectId) method instead of push(). When running in the reverse mode the generator annotates lines by the commit they are removed in, rather than the commit they were added in. This allows a user to discover where a line disappeared from when they are looking at an older revision in the repository. For example: blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java ( 1080) } 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081) 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /** 2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file. Above we learn that line 1080 (a closing curly brace of the prior method) still exists in branch master, but the Javadoc comment below it has been removed by Christian Halstrick on May 20th as part of commit 2302a6d3. This result differs considerably from that of C Git's blame --reverse feature. JGit tells the reader which commit performed the delete, while C Git tells the reader the last commit that still contained the line, leaving it an exercise to the reader to discover the descendant that performed the removal. This is still only a basic implementation. Quite notably it is missing support for the smart block copy/move detection that the C implementation of `git blame` is well known for. Despite being incremental, the BlameGenerator can only be run once. After the generator runs it cannot be reused. A better implementation would support applications browsing through history efficiently. In regards to CQ 5110, only a little of the original code survives. CQ: 5110 Bug: 306161 Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f Signed-off-by: Kevin Sawicki <kevin@github.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
13 år sedan
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115
  1. /*
  2. * Copyright (C) 2011, Google Inc.
  3. * and other copyright owners as documented in the project's IP log.
  4. *
  5. * This program and the accompanying materials are made available
  6. * under the terms of the Eclipse Distribution License v1.0 which
  7. * accompanies this distribution, is reproduced below, and is
  8. * available at http://www.eclipse.org/org/documents/edl-v10.php
  9. *
  10. * All rights reserved.
  11. *
  12. * Redistribution and use in source and binary forms, with or
  13. * without modification, are permitted provided that the following
  14. * conditions are met:
  15. *
  16. * - Redistributions of source code must retain the above copyright
  17. * notice, this list of conditions and the following disclaimer.
  18. *
  19. * - Redistributions in binary form must reproduce the above
  20. * copyright notice, this list of conditions and the following
  21. * disclaimer in the documentation and/or other materials provided
  22. * with the distribution.
  23. *
  24. * - Neither the name of the Eclipse Foundation, Inc. nor the
  25. * names of its contributors may be used to endorse or promote
  26. * products derived from this software without specific prior
  27. * written permission.
  28. *
  29. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
  30. * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
  31. * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  32. * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  33. * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  34. * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  35. * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  36. * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  37. * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  38. * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39. * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  40. * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  41. * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  42. */
  43. package org.eclipse.jgit.blame;
  44. import java.io.IOException;
  45. import org.eclipse.jgit.errors.IncorrectObjectTypeException;
  46. import org.eclipse.jgit.errors.MissingObjectException;
  47. import org.eclipse.jgit.lib.AnyObjectId;
  48. import org.eclipse.jgit.lib.Repository;
  49. import org.eclipse.jgit.revwalk.RevCommit;
  50. import org.eclipse.jgit.revwalk.RevWalk;
  51. final class ReverseWalk extends RevWalk {
  52. ReverseWalk(Repository repo) {
  53. super(repo);
  54. }
  55. /** {@inheritDoc} */
  56. @Override
  57. public ReverseCommit next() throws MissingObjectException,
  58. IncorrectObjectTypeException, IOException {
  59. ReverseCommit c = (ReverseCommit) super.next();
  60. if (c == null)
  61. return null;
  62. for (int pIdx = 0; pIdx < c.getParentCount(); pIdx++)
  63. ((ReverseCommit) c.getParent(pIdx)).addChild(c);
  64. return c;
  65. }
  66. /** {@inheritDoc} */
  67. @Override
  68. protected RevCommit createCommit(AnyObjectId id) {
  69. return new ReverseCommit(id);
  70. }
  71. static final class ReverseCommit extends RevCommit {
  72. private static final ReverseCommit[] NO_CHILDREN = {};
  73. private ReverseCommit[] children = NO_CHILDREN;
  74. ReverseCommit(AnyObjectId id) {
  75. super(id);
  76. }
  77. void addChild(ReverseCommit c) {
  78. // Always put the most recent child onto the front of the list.
  79. // This works correctly because our ReverseWalk parent (above)
  80. // runs in COMMIT_TIME_DESC order. Older commits will be popped
  81. // later and should go in front of the children list so they are
  82. // visited first by BlameGenerator when considering candidates.
  83. int cnt = children.length;
  84. if (cnt == 0)
  85. children = new ReverseCommit[] { c };
  86. else if (cnt == 1)
  87. children = new ReverseCommit[] { c, children[0] };
  88. else {
  89. ReverseCommit[] n = new ReverseCommit[1 + cnt];
  90. n[0] = c;
  91. System.arraycopy(children, 0, n, 1, cnt);
  92. children = n;
  93. }
  94. }
  95. int getChildCount() {
  96. return children.length;
  97. }
  98. ReverseCommit getChild(int nth) {
  99. return children[nth];
  100. }
  101. }
  102. }