Motivation: JSch serves as 'default' implementations of the SSH
transport. If a client application does not use it then there is no need
to pull in this dependency.

Move the classes depending on JSch to an OSGi fragment extending the
org.eclipse.jgit bundle and keep them in the same package as before
since moving them to another package would break API. Defer moving them
to a separate package to the next major release.

Add a new feature org.eclipse.jgit.ssh.jsch feature to enable
installation. With that users can now decide which of the ssh client
integrations (JCraft JSch or Apache Mina SSHD) they want to install.
We will remove the JCraft JSch integration in a later step due to the
reasons discussed in bug 520927.

Bug: 553625
Change-Id: I5979c8a9dbbe878a2e8ac0fbfde7230059d74dc2
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>

Create the bundle and move the SshTestGitServer there. Verified that
the Eclipse build still works and ran JSchSshTest and ApacheSshTest as
junit tests inside Eclipse.

Update maven build and features to account for that. Verified by
running full maven build including packaging.

Update bazel build files to account for that. Verified by a
clean-slate bazel build :all, followed by running the JSchSshTest
and the ApacheSshTest via bazel.

Change-Id: Ia084942f4425b454529de148e00417e7da786a90
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Change-Id: I61c9c173237a535da8576a9299bfd4bb29e8f56b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Introduce a http test bundle to make this functionality available for
EGit tests. A simple http server class is provided. The jetty version
was updated to a version that is also available via p2 (needed in EGit
UI tests).

Change-Id: I13bfc4c6c47e27d8f97d3e9752347d6d23e553d4
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

This restores the ability to build using just Eclipse without
strange procedures, extra plugins and it is again possible to
work on both JGit and EGit in the same Eclipse workspace with
ease.

Change-Id: I0af08127d507fbce186f428f1cdeff280f0ddcda
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>

Tycho isn't production ready for projects like JGit to be using as
their primary build driver.  Some problems we ran into with Tycho
0.6.0 that are preventing us from using it are:

 * Tycho can't run offline

   The P2 artifact resolver cannot perform its work offline.  If the
   build system has no network connection, it cannot compile a
   project through Tycho.  This is insane for a distributed version
   control system where developers are used to being offline during
   development and local testing.

 * Magic state in ~/.m2/repository/.meta/p2-metadata.properties

   Earlier iterations of this patch tried to use a hybrid build,
   where Tycho was only used for the Eclipse specific feature and P2
   update site, and maven-bundle-plugin was used for the other code.
   This build seemed to work, but only due to magic Tycho specific
   state held in my local home directory.  This means builds are not
   consistently repeatable across systems, and lead me to believe
   I had a valid build, when in fact I did not.

 * Manifest-first build produces incomplete POMs

   The POM created by the manifest-first build format does not
   contain the dependency chain, leading a downstream consumer to
   not import the runtime dependencies necessary to execute the
   bundle it has imported.  In JGit's case, this means JSch isn't
   included in our dependency chain.

 * Manifest-first build produces POMs unreadable by Maven 2.x

   JGit has existing application consumers who are relying on
   Maven 2.x builds.  Forcing them to step up to an alpha release
   of Maven 3 is simply unacceptable.

 * OSGi bundle export data management is tedious

   Editing each of our pom.xml files to mark a new release is
   difficult enough as it is.  Editing every MANIFEST.MF file to
   list our exported packages and their current version number is
   something a machine should do, not a human.  Yet the Tycho OSGi
   way unfortunately demands that a human do this work.

 * OSGi bundle import data management is tedious

   There isn't a way in the MANIFEST.MF file format to reuse the
   same version tags across all of our imports, but we want to have
   a consistent view of our dependencies when we compile JGit.

After wasting more than 2 full days trying to get Tycho to work,
I've decided its a lost cause right now.  We need to be chasing down
bugs and critical features, not trying to bridge the gap between
the stable Maven repository format and the undocumented P2 format
used only by Eclipse.

So, switch the build to use Apache Felix's maven-bundle-plugin.

This is the same plugin Jetty uses to produce their OSGi bundle
manifests, and is the same plugin used by the Apache Felix project,
which is an open-source OSGi runtime.  It has a reasonable number
of folks using it for production builds, and is running on top of
the stable Maven 2.x code base.

With this switch we get automatically generated MANIFEST.MF files
based on reasonably sane default rules, which reduces the amount
of things we have to maintain by hand.  When necessary, we can add
a few lines of XML to our POMs to tweak the output.

Our build artifacts are still fully compatible with Maven 2.x, so
any downstream consumers are still able to use our build products,
without stepping up to Maven 3.x.  Our artifacts are also valid as
OSGi bundles, provided they are organized on disk into a repository
that the runtime can read.

With maven-bundle-plugin the build runs offline, as much as Maven
2.x is able to run offline anyway, so we're able to return to a
distributed development environment again.

By generating MANIFEST.MF at the top level of each project (and
therefore outside of the target directory), we're still compatible
with Eclipse's PDE tooling.  Our projects can be imported as standard
Maven projects using the m2eclipse plugin, but the PDE will think
they are vaild plugins and make them available for plugin builds,
or while debugging another workbench.

This change also completely removes Tycho from the build.

Unfortunately, Tycho 0.6.0's pom-first dependency resolver is broken
when resolving a pom-first plugin bundle through a manifest-first
feature package, so bundle org.eclipse.jgit can't be resolved,
even though it might actually exist in the local Maven repository.

Rather than fight with Tycho any further, I'm just declaring it
plugina-non-grata and ripping it out of the build.

Since there are very few tools to build a P2 format repository, and
no documentation on how to create one without running the Eclipse
UI manually by poking buttons, I'm declaring that we are not going
to produce a P2 update site from our automated builds.

Change-Id: If7938a86fb0cc8e25099028d832dbd38110b9124
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

If we are on a Java 6 JVM we should have the Console class available,
unless the user has redirected /dev/null to stdin.  When there is a
console present we would prefer to use that for command line prompts
as that is what the user expects from a command line tool.

Change-Id: Ibaf87bb5540371d94d96d1b7e94ca002f752e5bd
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

The LocalDiskRepositoryTestCase class is derived from the current
RepositoryTestCase code and is meant for application (or our own)
tests to subclass and access temporary repositories on the local
client disk.

Change-Id: Idff096cea40a7b2b56a90fb5de179ba61ea3a0eb
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

This way we depend upon the MANIFEST.MF to define our classpath
and our build will act more like any other OSGI bundle build.

Change-Id: I9e1f1f5a0bccb0ab0e39e49b75fb400fea446619
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

This new UI bundle contains the org.eclipse.jgit.awtui package,
which was moved out of the org.eclipse.jgit bundle.

org.eclipse.jgit.pgm depends on org.eclipse.jgit.ui, so we need
to update the classpath and make_jgit.sh to include it.

This move takes the awtui classes out of the Maven build, which
means we are no longer able to distribute these classes to our
downstream Maven customers.  The entire Maven package structure
needs to be overhauled so that Eclipse bundle matches 1:1 with the
Maven artifact.

Bug: https://bugs.eclipse.org/291124
Change-Id: Ibf1a9968387e3d11fdce54592f710ec4cc7f1ddb
Signed-off-by: Mykola Nikishov <mn@mn.com.ua>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Per CQ 3448 this is the initial contribution of the JGit project
to eclipse.org.  It is derived from the historical JGit repository
at commit 3a2dd9921c.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>