ApplyCommand: use byte arrays for text patches, not strings
Instead of converting the patch bytes to strings apply the patch on
byte level, like C git does. Converting the input lines and the hunk
lines from bytes to strings and then applying the patch based on
strings may give surprising results if a patch converts a text file
from one encoding to another. Moreover, in the end we don't know which
encoding to use to write the result.
Previous code just wrote the result as UTF-8, which forcibly changed
the encoding if the original input had some other encoding (even if the
patch had the same non-UTF-8 encoding). It was also wrong if the input
was UTF-8, and the patch should have changed the encoding to something
else.
So use ByteBuffers instead of Strings. This has the additional advantage
that all these ByteBuffers can share the underlying byte arrays of the
input and of the patch, so it also reduces memory consumption.
Change-Id: I450975f2ba0e7d0bec8973e3113cc2e7aea187ee
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
[spotbugs] Silence CN_IMPLEMENTS_CLONE_BUT_NOT_CLONEABLE in jgit tests
We want complete control over clone behavior and don't want to use
Object's clone implementation.
Change-Id: I34a4e967f8aa3879c69a4978768bd35712c4105c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It seems Eclipse 4.18 reports them as error whereas earlier versions
ignored this maybe since we don't require javadoc comments for all the
test bundles.
Change-Id: I3f4d42ce681ea5c2b4b302991d2641290ac8561d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Enable and fix "Statement unnecessarily nested within else clause" warnings
Since [1] the gerrit project includes jgit as a submodule, and has this
warning enabled, resulting in 100s of warnings in the console.
Also enable the warning here, and fix them.
At the same time, add missing braces around adjacent and nearby one-line
blocks.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/227897
Change-Id: I81df3fc7ed6eedf6874ce1a3bedfa727a1897e4c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Do not require test bundles to export all packages
Configure PDE to not warn about not exported packages for test bundles.
Reusable test code which other bundles may want to reuse should go into
one of the junit bundles:
- org.eclipse.jgit.junit
- org.eclipse.jgit.junit.http
- org.eclipse.jgit.junit.ssh
Change-Id: Ifbdf30f8552e8f4bad6bbdeb63f729c53c844315
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Disable Eclipse warning about unrecognized @SuppressWarnings value
The code base has several @SuppressWarnings annotations to suppress
warnings raised by Error Prone, but those are not recognized by
Eclipse and there is currently no way to tell it about them [1].
Suppress them for now.
[1] https://bugs.eclipse.org/bugs/show_bug.cgi?id=392045
Change-Id: I3de7cfa8ad4370ca5be71e1303879c73ab6829c1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The commit message template contains a superfluous blank at the end of
the first line, which is deleted by this change. This is only relevant
for jgit contributors using Eclipse, not for jgit users.
Change-Id: I462deb49c26fb64b3dc2d1d75f1e40ef302b0fc9
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Ignore warning for minor version change without API change
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Partially revert c0ad77d8 "Enhance Eclipse save actions"
Do not automatically organize imports using a save action since this
seems to be buggy and removed some annotations org.eclipse.jgit.pgm
needs to use args4j.
Change-Id: I5a91292c3b9241ce2dde3e4ecce14ad460097129
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Partially revert c0ad77d8 "Enhance Eclipse save actions"
Revert the following save actions which were introduced in c0ad77d8:
- always use braces around blocks
- remove unused imports
Other than I expected save actions are run globally on edited files -
and not only on edited code lines only.
Hence revert the save action "Convert control statement bodies to
blocks" which would affect a large number of code lines not affected by
the change editing some small part of a class. This would generate a
large number of changes which may lead to many unnecessary conflicts.
Total number of affected lines across jgit would be around 10k lines.
Also revert "Remove unused imports" since it erroneously removes imports
of some annotations needed by pgm classes using args4j.
Change-Id: I879a47f68e664129e6124cf25c1ae1f6a2d7a5aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following Eclipse save actions executed when saving modified
lines. This should help to reduce manual work needed to maintain a clean
and consistent code style:
- organize imports
- always use braces around blocks
- add missing annotations
- @Override including implementation of interface methods
- @Deprecated
- remove
- unused imports
- unnecessary $NON-NLS$ tags
- redundant type arguments
Also add default values for new settings that were introduced in recent
Eclipse versions up to Neon since we updated save rules the last time.
Change-Id: Idc90b249df044d0552f04edf01a5f607c4846f50
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Enable and fix warnings about redundant specification of type arguments
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Enable and fix 'Should be tagged with @Override' warning
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Making the methods static would gain little in performance,
make the code harder to change. Removing unncessary warnings
is more important.
Change-Id: If3e6aa9c1d92e58b4e7a8e246cf4aace237d7a7b
These settings were added by Eclipse simply by touching
the project settings. Adding these makes it simpler to see
what local changes have been made.
Change-Id: Iab0aa62530312eb0c78b03b5c6a632742bcc4978
See change I08bed4275af9ec52aa4d7054067ac82f6a3c9781, where fixing such
warning lead to complaints.
If fixing is not wanted, disable it instead.
Change-Id: If31d4028fa1c6377a11e83ed5688b45701cec68b
Note the the settings are slightly less restrictive for test bundles.
-Also cleanup a couple of malformed javadocs
-Update compiler warnings/errors to include default values from Juno
-We now flag diagnosed null dereference as error. We didn't do that
earlier because of some false positives.
Change-Id: I58386d63164e65d3d8d1998da3390d99bdc7381a
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
Enforce the use of Java5 API:s only (with a few exceptions)
This only works with Eclipse 3.6 and newer and requires installation
of new package. Documentation is not very good, but there is a blog
about it here:
http://eclipseandjazz.blogspot.com/2011/10/of-invalid-references-to-system.html
API checking is especially useful on OS X where Java5 is not readily
available.
Change-Id: I3c0ad460874a21c073f5ac047146cbf5d31992b4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use commit message best practices for Mylyn Commit template
We should use a template for Mylyn commit messages that matches with our
guidelines for commit messages.
http://wiki.eclipse.org/EGit/Contributor_Guide#Commit_message_guidelines
Bug: 337401
Change-Id: I05812abf0eb0651d22c439142640f173fc2f2ba0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Updates the project level settings to run the formatter
on save on only on the edited lines.
Change-Id: I26dd69d0c95e6d73f9fdf7031f3c1dbf3becbb79
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Some sources had dos line endings. Also configure all projects to use
unix line endings and UTF-8 text encoding.
Change-Id: I8fc9a1dbb219ffa91d1b3011b3b11b7e48e74ca7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Eclipse IDE: Automatically remove trailing whitespace on save
Our project coding conventions do not want trailing whitespace at
the end of a source code line. Configure Eclipse to automatically
remove them when saving any Java source file.
Change-Id: I9701366b3b1240879761b30556e6ff416e969e1d
Reviewed-by: Mykola Nikishov <mn@mn.com.ua>
Reviewed-by: Alex Blewitt <alex.blewitt@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Per CQ 3448 this is the initial contribution of the JGit project
to eclipse.org. It is derived from the historical JGit repository
at commit 3a2dd9921c.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Matthias Sohn
Thomas Wolf
David Pursehouse
Michael Keppler
Robin Rosenberg
Robin Stocker
Chris Aniszczyk
Shawn O. Pearce
Git Development Community