When running IndexPack we use a CachedObjectDirectory, which
knows what objects are loose and tries to avoid stat(2) calls for
objects that do not exist in the repository, as stat(2) on Win32
is very slow.
However large delta objects found in a pack file are expanded into
a loose object, in order to avoid costly delta chain processing
when that object is used as a base for another delta.
If this expand occurs while working with the CachedObjectDirectory,
we need to update the cached directory data to include this new
object, otherwise it won't be available when we try to open it
during the object verify phase.
Bug: 324868
Change-Id: Idf0c76d4849d69aa415ead32e46a435622395d68
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix PlotCommitList to set lanes on child-less commits
In PlotCommitList.enter() commits are positioned on lanes for visual
presentation. This implementation was buggy: commits without
children (often the starting points for the RevWalk) are not positioned
on separate lanes.
The problem was that when handling commits with multiple children
(that's where branches fork out) it was not handled that some of the
children may not have been positioned on a lane yet. I fixed that and
added a number of tests which specifically test the layout of commits
on lanes.
Bug: 300282
Bug: 320263
Change-Id: I267b97ecccb5251cec54cec90207e075ab50503e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Instead of spooling large delta bases into temporary files and then
immediately deleting them afterwards, spool the large delta out to
a normal loose object. Later any requests for that large delta can
be answered by reading from the loose object, which is much easier
to stream efficiently for readers.
Since the object is now duplicated, once in the pack as a delta and
again as a loose object, any future prune-packed will automatically
delete the loose object variant, releasing the wasted disk space.
As prune-packed is run automatically during either repack or gc, and
gc --auto triggers automatically based on the number of loose objects,
we get automatic cache management for free. Large objects that were
unpacked will be periodically cleared out, and will simply be restored
later if they are needed again.
After a short offline discussion with Junio Hamano today, we may want
to propose a change to prune-packed to hold onto larger loose objects
which also exist in pack files as deltas, if the loose object was
recently accessed or modified in the last 2 days.
Change-Id: I3668a3967c807010f48cd69f994dcbaaf582337c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Remember loose objects and fast-track their lookup
Recently created objects are usually what branches point to, and
are usually written out as loose objects. But due to the high cost
of asking the operating system if a file exists, these are the last
thing that ObjectDirectory examines when looking for an object by
its ObjectId.
Caching recently seen loose objects permits the opening code to
jump directly to the loose object, accelerating lookup for branch
heads that are accessed often.
To avoid exploding the cache its limited to approximately 2048
entries. When more ids are added, the table is simply cleared
and reset in size.
Change-Id: I18f483217412b102f754ffd496c87061d592e535
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This class is used only to cache the unpacked form of an object that
was used as a base for another object. The theory goes that if an
object is used as a delta base for A, it will probably also be a
delta base for B, C, D, E, etc. and therefore having an unpacked copy
of it on hand will make delta resolution for the others very fast.
However since objects are usually only accessed once, we don't want
to cache everything we unpack, just things that we are likely to
need again. The only things we need again are the delta bases.
Hence, its a delta base cache.
This gets us the class name UnpackedObjectCache back, so we can
use it to actually create a cache of unpacked object information.
Change-Id: I121f356cf4eca7b80126497264eac22bd5825a1d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The core.autocrlf variable can take on three values: false, true,
and input. Parsing it as a boolean is wrong, we instead need to
parse a tri-state enumeration.
Add support for parsing and setting enum values from Java from and
to the text based configuration file, and use that to handle the
autocrlf variable.
Bug: 301775
Change-Id: I81b9e33087a33d2ef2eac89ba93b9e83b7ecc223
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of making the sequence itself responsible for the equivalence
function, use an external function that is supplied by the caller.
This cleans up the code because we now say cmp.equals(a, ai, b, bi)
instead of a.equals(ai, b, bi).
This refactoring also removes the odd concept of creating different
types of sequences to have different behaviors for whitespace
ignoring. Instead DiffComparator now supports singleton functions
that apply a particular equivalence algorithm to a type of sequence.
Change-Id: I559f494d81cdc6f06bfb4208f60780c0ae251df9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix checkReferencedIsReachable to use correct base list
When checkReferencedIsReachable is set in ReceivePack we are trying
to prove that the push client is permitted to access an object that
it did not send to us, but that the received objects link to either
via a link inside of an object (e.g. commit parent pointer or tree
member) or by a delta base reference.
To do this check we are making a list of every potential delta base,
and then ensuring that every delta base used appears on this list.
If a delta base does not appear on this list, we abort with an error,
letting the client know we are missing a particular object.
Preventing spurious errors about missing delta base objects requires
us to use the exact same list of potential delta bases as the remote
push client used. This means we must use TOPO ordering, and we
need to enable BOUNDARY sorting so that ObjectWalk will correctly
include any trees found during the enumeration back to the common
merge base between the interesting and uninteresting heads.
To ensure JGit's own push client matches this same potential delta
base list, we need to undo 60aae90d4d ("Disable topological
sorting in PackWriter") and switch back to using the conventional
TOPO ordering for commits in a pack file. This ensures that our
own push client will use the same potential base object list as
checkReferencedIsReachable uses on the receiving side.
Change-Id: I14d0a326deb62a43f987b375cfe519711031e172
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since we are only checking the links between objects we don't need
to hold onto commit messages after their headers have been parsed
by the walker. Dropping them saves a bit of memory, which is always
good when accepting huge pack files.
Change-Id: I378920409b6acf04a35cdf24f81567b1ce030e36
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
DeltaStream: Fix data corruption when reading large copies
If the copy instruction was larger than the input buffer given to us,
we copied the wrong part of the base stream during the next read().
This occurred on really big binary files where a copy instruction
of 64k wasn't unreasonable, but the caller's buffer was only 8192
bytes long. We copied the first 8192 bytes correctly, but then
reseeked the base stream back to the start of the copy region on
the second read of 8192 bytes. Instead of a sequence like ABCD
being read into the caller, we read AAAA.
Change-Id: I240a3f722a3eda1ce8ef5db93b380e3bceb1e201
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Use 8192 as default buffer size in ObjectLoader copyTo
As ObjectStreams are supposed to be buffered, most implementors will
be wrapping their underlying stream inside of a BufferedInputStream
in order to satisfy this requirement. Because developers are by
nature lazy, they will use the default buffer size rather than
specify their own.
The OpenJDk JRE implementations use 8192 as the default buffer
size, and when the higher level reader uses the same buffer size
the buffers "stack" nicely by avoiding a copy to the internal
buffer array. As OpenJDK is a popular virtual machine, we should
try to benefit from this nice stacking property during copyTo().
Change-Id: I69d53f273b870b841ced2be2e9debdfd987d98f4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We can slightly optimize this method by removing some compares
based on knowledge of how the orderings have to work. This way
a getType() invocation requires at most 2 int compares for any
result, vs. the 6 required to find REPLACE before.
Change-Id: I62a04cc513a6d28c300d1c1496a8608d5df4efa6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Exposing isEmpty, getLengthA, getLengthB make it easier to examine
the state of an edit and work with it from higher level code.
The before and after cut routines make it easy to split an edit
that contains another edit, such as to decompose a REPLACE that
contains a common sequence within it.
Change-Id: Id63d6476a7a6b23acb7ab237d414a0a1a7200290
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We shouldn't escape non-special ASCII characters such as '@' or '~'.
These are valid in a path name on POSIX systems, and may appear as
part of a path in a GNU or Git style patch script. Escaping them
into octal just obfuscates the user's intent, with no gain.
When parsing an escaped octal sequence, we must parse no more
than 3 digits. That is, "\1002" is actually "@2", not the Unicode
character \u0202.
Change-Id: I3a849a0d318e69b654f03fd559f5d7f99dd63e5c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
QuotedString.GIT_PATH returns the input reference exactly if
the string does not require quoting, otherwise it returns a
copy that contains the quotes on either end, plus escapes in
the middle where necessary to meet conventions.
Testing the return against '"' + name + '"' is always false,
because GIT_PATH will never return it that way. The only way
we have quotes on either end is if there is an escape in the
middle, in which case the string isn't equal anyway.
Change-Id: I4d21d8e5c7da0d7df9792c01ce719548fa2df16b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
ReceivePack: Rethrow exceptions caught during indexing
If we get an exception while indexing the incoming pack, its likely
a stream corruption. We already report an error to the client, but
we eat the stack trace, which makes debugging issues related to a
bug inside of JGit nearly impossible. Rethrow it under a new type
UnpackException, so embedding servers or applications can catch the
error and provide it to a human who might be able to forward such
traces onto a JGit developer for evaluation.
Change-Id: Icad41148bbc0c76f284c7033a195a6b51911beab
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of getting the limit from CoreConfig, use the larger of the
reader's limit or 5 MiB, under the assumption that any annotated tag
or commit of interest should be under 5 MiB. But if a repository
was really insane and had bigger objects, the reader implementation
can set its streaming limit higher in order to allow RevWalk to
still process it.
Change-Id: If2c15235daa3e2d1f7167e781aa83fedb5af9a30
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Move ObjectDirectory streaming limit to WindowCacheConfig
IDEs like Eclipse offer up the settings in WindowCacheConfig to the
user as a global set of options that are configured for the entire
JVM process, not per-repository, as the cache is shared across the
entire JVM. The limit on how much we are willing to allocate for
an object buffer is similar to the limit on how much we can use for
data caches, allocating that much space impacts the entire JVM and
not just a single repository, so it should be a global limit.
Change-Id: I22eafb3e223bf8dea57ece82cd5df8bfe5badebc
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the iterators passed into a diff formatter are working tree
iterators, we should enable ignoring files that are ignored, as
well as actually pull up the current content from the working tree
rather than getting it from the repository.
Because we abstract away the working directory access logic,
we can now actually support rename detection between the working
directory and the local repository when using a DiffFormatter.
This means its possible for an application to show an unstaged
delete-add pair as a rename if the add path is not ignored.
(Because the ignored file wouldn't show up in our difference output.)
Even more interesting is we can now do rename detection between any
two working trees, if both input iterators are WorkingTreeIterators.
Unfortunately we don't (yet) optimize for comparing the working
tree with the index involved so we can take advantage of cached
stat data to rule out non-dirty paths.
Change-Id: I4c0598afe48d8f99257266bf447a0ecd23ca7f5e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix TreeWalk bug comparing DirCache and WorkingTree with ANY_DIFF
When comparing a DirCache and a WorkingTree using ANY_DIFF we
sometimes didn't recursive into a subtree of both sides gave us
zeroId() back for the identity of a subtree. This happens when the
DirCache doesn't have a valid cache tree for the subtree, as then
it uses zeroId() for the ObjectId of the subtree, which then appears
to be equal to the zeroId() of the WorkingTreeIterator's subtree.
We work around this by adding a hasId() method that returns true
only if this iterator has a valid ObjectId. The idEquals method
on TreeWalk than only performs a compare between two iterators if
both iterators have a valid id.
Change-Id: I695f7fafbeb452e8c0703a05c02921fae0822d3f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Move rename detection, path following into DiffFormatter
Applications just want a quick way to configure our diff
implementation, and then just want to use it without a lot of fuss.
Move all of the rename detection logic and path following logic
out of our pgm package and into DiffFormatter itself, making it
much easier for a GUI to take advantage of the features without
duplicating a lot of code.
Change-Id: I4b54e987bb6dc804fb270cbc495fe4cae26c7b0e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
canResetHead now returns true.
Resetting mixed / hard works in EGit in merging state.
Change-Id: I1512145bbd831bb9734528ce8b71b1701e3e6aa9
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Sorting the array can be useful when its being used as a map of pairs
that are appended into the array and then later merge-joined against
another array of similar semantics.
Change-Id: I2e346ef5c99ed1347ec0345b44cda0bc29d03e90
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We know exactly how many lines we need by the time we compute our
per-line hashes, as we have already built the lines IntList to give
us the starting position of each line in the buffer. Using that
we can properly size the array, and don't need the dynamic growing
feature of IntList. So drop the indirection and just use a fixed
size array.
Change-Id: I5c8c592514692a8abff51e5928aedcf71e100365
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Create a new 'org.eclipse.jgit.api.errors' package to contain
exceptions related to using the Git porcelain API.
Change-Id: Iac1781bd74fbd520dffac9d347616c3334994470
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Add toString and improve Javadoc of NotIgnoredFilter
Today while debugging some TreeWalk related code I noticed this
filter did not have a toString(), making it harder to see what the
filter graph was at a glance in the debugger. Add a toString()
for debugging to match other TreeFilters, and clean up the Javadoc
slightly so its a bit more clear about the purpose of the filter.
While we are mucking about with some of this code, simplify
the logic of include so its shorter and thus faster to read.
The pattern now more closely matches that of SkipWorkTreeFilter.
Change-Id: Iad433a1fa6b395dc1acb455aca268b9ce2f1d41b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows callers to force the iterator back to its starting point,
so it can be traversed again. The default way to do this is to use
back(1) until first() is true, but this isn't very efficient for any
iterator. All current implementations have better ways to implement
reset without needing to seek backwards.
Change-Id: Ia26e6c852fdac8a0e9c80ac72c8cca9d897463f4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we are asked to create a difference between two files the caller
really wants to see that output. Instead of punting because a file
is too big to process, consider it to be binary. This reduces the
accuracy of our output display, but makes it a lot more likely that
the formatter can still generate something semi-useful.
We set our default binary threshold to 50 MiB, which is the same
threshold that PackWriter uses before punting and deciding a file
is too big to delta compress. Anything under this size we try to
load and process, anything over that size (or that won't allocate
in the heap) gets tagged as binary.
Change-Id: I69553c9ef96db7f2058c6210657f1181ce882335
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When adding or deleting a file, we shouldn't ever prefix /dev/null
with the a/ or b/ prefixes. Doing so is a mistake and confuses a
patch parser which handles /dev/null magically, while a/dev/null is
a file called null in the dev directory of the project.
Also when adding or deleting the "diff --git" line has the "real"
path on both sides, so we should see the following when adding the
file called foo:
diff --git a/foo b/foo
--- /dev/null
+++ b/foo
The --- and +++ lines do not appear in a pure rename or copy delta,
C Git diff seems to omit these, so we now omit them as well. We also
omit the index line when the ObjectIds are exactly equal.
Change-Id: Ic46892dea935ee8bdee29088aab96307d7ec6d3d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Instead of trying to stream out the header, we can drop a redundant
code path by formatting the header into a temporary buffer and then
streaming out the actual line differences later.
Its a small amount of unnecessary work to buffer the file header,
but these are typically very tiny so the cost to format and reparse
is relatively low.
Change-Id: Id14a527a74ee0bd7e07f46fdec760c22b02d5bdf
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Move DiffFormatter default initialization to fields
Other fields in this class are initialized in their declaration, make
the code consistent with itself and use only one style.
Change-Id: I49a007e97ba52faa6b89f7e4b1eec85dccac0fa4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This class does a lot more than just reflow a patch script, it now is
the primary means of creating a diff output.
Change-Id: I74467c9a53dc270ef8c84e7c75f388414ec8ba8f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add FS.detect() for detection of file system abstraction.
To give the user more control on which file system abstraction
should be used on Windows, FS.detect() may be configured
to assume a Cygwin installation or nor.
Currently, if a branch is created that has special chars ('#' in the bug),
Config will surround the subsection name with double quotes during
it's toText method which will result in an invalid file after saving the
Config.
Bug: 318249
Change-Id: I0a642f52def42d936869e4aaaeb6999567901001
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Extended flags are processed and available via DirCacheEntry's
new isSkipWorkTree() and isIntentToAdd() methods. "resolve-undo"
information is completely ignored since its an optional extension.
Change-Id: Ie6e9c6784c9f265ca3c013c6dc0e6bd29d3b7233
Improve MergeAlgorithm to produce smaller conflicts
The merge algorithm was reporting conflicts which where to big.
Example: The common base was "ABC", the "ours" version contained
"AB1C" (the addition of "1" after pos 2) and the "theirs" version also
contained "AB1C". We have two potentially conflicting edits in the
same region which happen to bring in exactly the same content. This
should not be a conflict - but was previously reported as
"AB<<<1===1>>>C".
This is fixed by checking every conflicting chunk whether the
conflicting regions have a common prefix or suffix and by removing
this regions from the conflict.
Change-Id: I4dc169b8ef7a66ec6b307e9a956feef906c9e15e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
the merge command should use by default the "resolve" merge strategy.
Change-Id: I6c6973a3397cca12bd8a6bd950d04b1766a08b4c
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
This adds the first merge strategy to JGit which does real
content-merges if necessary. The new merge strategy "resolve" takes as
input three commits: a common base, ours and theirs. It will simply takeover
changes on files which are only touched in ours or theirs. For files
touched in ours and theirs it will try to merge the two contents
knowing taking into account the specified common base.
Rename detection has not been introduced for now.
Change-Id: I49a5ebcdcf4f540f606092c0f1dc66c965dc66ba
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Use 3 different types of LargeObjectException for the 3 major ways
that we can fail to load an object. For each of these use a unique
string translation which describes the root cause better than just
the ObjectId.name() does.
Change-Id: I810c98d5691b74af9fc6cbd46fc9879e35a7bdca
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
IndexPack: Use byte limited form of getCachedBytes
Currently our algorithm requires that we have the delta base as
a contiguous byte array... but getCachedBytes() might not work
if the object is considered to be large by its underlying loader.
Use the limited form to obtain the object as a byte array instead.
Change-Id: I33f12a8811cb6a4a67396174733f209db8119b42
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Matthias Sohn
Shawn O. Pearce
Christian Halstrick
Robin Rosenberg
Jens Baumgart
Chris Aniszczyk
Marc Strapetz
Mathias Kinzler