The filter did not correctly match smart HTTP client requests,
so it always fell back on HTTP status codes for errors. This
usually causes a smart client to retry a dumb request, which
is not what the server wants.
Change-Id: I42592378dc42fbe308ef30a2923786c690f668a9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Smart HTTP clients may request both multi_ack_detailed and no-done in
the same request to prevent the client from needing to send a "done"
line to the server in response to a server's "ACK %s ready".
For smart HTTP, this can save 1 full HTTP RPC in the fetch exchange,
improving overall latency when incrementally updating a client that
has not diverged very far from the remote repository.
Unfortuantely this capability cannot be enabled for the traditional
bi-directional connections. multi_ack_detailed has the client sending
more "have" lines at the same time that the server is creating the
"ACK %s ready" and writing out the PACK stream, resulting in some race
conditions and/or deadlock, depending on how the pipe buffers are
implemented. For very small updates, a server might actually be able
to send "ACK %s ready", then the PACK, and disconnect before the
client even finishes sending its first batch of "have" lines. This
may cause the client to fail with a broken pipe exception. To avoid
all of these potential problems, "no-done" is restricted only to the
smart HTTP variant of the protocol.
Change-Id: Ie0d0a39320202bc096fec2e97cb58e9efd061b2d
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Make running static checks configurable in maven build
In order to run the static checks run:
mvn -P static-checks clean install
Change-Id: I14077498a04be986ded123ddbfc97da8f9bc3130
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When the client is clearly making a smart HTTP request to our smart
HTTP server, return any errors like RepositoryNotFoundException or
ServiceNotEnabledException inside of the payload as a Git level ERR
message, rather than an HTTP error code.
This prevents the C Git command line client from retrying a failed
"$URL/info/refs?service=git-upload-pack" request without the smart
service URL, only to fail again with "403 Forbidden" when the dumb
as-is service has been disabled by the server configuration, or is
unavailable because the repository is not on the local filesystem.
Change-Id: I57e8756d5026e885e0ca615979bfcd729703be6c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
UploadPack: Add a PreUploadHook to monitor and control behavior
Embedding applications can use this hook to watch actions within
UploadPack and possibly reject them. This could be useful to prevent
clones of a large repository from this server, or to stop abusive
negotiation rounds that offer thousands of objects in a single batch.
Change-Id: Id96f1885ac4d61f22c80b6418fff54184b7348ba
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Allow application filters on smart HTTP operations
Permit applications embedding GitServlet to wrap the
info/refs?service=$name and /$name operations with a
servlet Filter.
To help applications inspect state of the operation,
expose the UploadPack or ReceivePack object into a
request attribute. This can be useful for logging,
or to implement throttling of requests like Gerrit
Code Review uses to prevent server overload.
Change-Id: Ib8773c14e2b7a650769bd578aad745e6651210cb
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some clients coming through proxies may advertise a different
Accept-Encoding, for example "Accept-Encoding: gzip(proxy)".
Matching by substring causes us to identify this as a false positive;
that the client understands gzip encoding and will inflate the
response before reading it.
In this particular case however it doesn't. Its the reverse proxy
server in front of JGit letting us know the proxy<->JGit link can
be gzip compressed, while the client<->proxy part of the link is not:
client <-- no gzip --> proxy <-- gzip --> JGit
Use a more standard method of parsing by splitting the value into
tokens, and only using gzip if one of the tokens is exactly the
string "gzip". Add a unit test to make sure this isn't broken in
the future.
Change-Id: Ib4c40f9db177322c7a2640808a6c10b3c4a73819
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
As PackParser supports a progress meter for the "Resolving deltas"
phase of its work, we should export this to smart HTTP clients so
they know the server is still working on their (large) upload.
However this isn't as simple as just dropping in a binding for
the SmartOutputStream to flush when its told to. We want to
avoid spurious flushes triggered by the use of sideband, or the
status report formatting in the send-pack/receive-pack protocol.
Change-Id: Ibd88022a298c5fed0edb23dfaf2e90278807ba8b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some clients coming through proxies may advertise a different
Accept-Encoding, for example "Accept-Encoding: gzip(proxy)".
Matching by substring causes us to identify this as a false positive;
that the client understands gzip encoding and will inflate the
response before reading it.
In this particular case however it doesn't. Its the reverse proxy
server in front of JGit letting us know the proxy<->JGit link can
be gzip compressed, while the client<->proxy part of the link is not:
client <-- no gzip --> proxy <-- gzip --> JGit
Use a more standard method of parsing by splitting the value into
tokens, and only using gzip if one of the tokens is exactly the
string "gzip". Add a unit test to make sure this isn't broken in
the future.
Change-Id: I30cda8a6d11ad235b56457adf54a2d27095d964e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Using a resolver and factory pattern for the anonymous git:// Daemon
class makes transport.Daemon more useful on non-file storage systems,
or in embedded applications where the caller wants more precise
control over the work tasks constructed within the daemon.
Rather than defining new interfaces, move the existing HTTP ones
into transport.resolver and make them generic on the connection
handle type. For HTTP, continue to use HttpServletRequest, and
for transport.Daemon use DaemonClient.
To remain compatible with transport.Daemon, FileResolver needs to
learn how to use multiple base directories, and how to export any
Repository instance at a fixed name.
Change-Id: I1efa6b2bd7c6567e983fbbf346947238ea2e847e
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It isn't strictly necessary to validate every reference's target
object is reachable in the repository before advertising it to a
client. This is an expensive operation when there are thousands of
references, and its very unlikely that a reference uses a missing
object, because garbage collection proceeds from the references and
walks down through the graph. So trying to hide a dangling reference
from clients is relatively pointless.
Even if we are trying to avoid giving a client a corrupt repository,
this simple check isn't sufficient. It is possible for a reference to
point to a valid commit, but that commit to have a missing blob in its
root tree. This can be caused by staging a file into the index,
waiting several weeks, then committing that file while also racing
against a prune. The prune may delete the blob, since its
modification time is more than 2 weeks ago, but retain the commit,
since its modification time is right now.
Such graph corruption is already caught during PackWriter as it
enumerates the graph from the client's want list and digs back
to the roots or common base. Leave the reference validation also
for that same phase, where we know we have to parse the object to
support the enumeration.
Change-Id: Iee70ead0d3ed2d2fcc980417d09d7a69b05f5c2f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We need to use findbugs-maven-plugin:2.3.2-SNAPSHOT
since otherwise build fails with maven-3.0 [1], [2].
We should switch to the release version as soon
as this becomes available.
[1] http://www.sonatype.com/people/2010/10/maven-3-0-has-landed/
[2] http://jira.codehaus.org/browse/MFINDBUGS-122
Bug: 327799
Change-Id: I1c57f81cf6f0450e56411881488c4ee754e458e3
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Revert "Hide Maven target directories from Eclipse"
This reverts commit db4c516f67 since
it breaks compatibility with Eclipse 3.5 which can no longer import
the projects
Bug: 323390
Change-Id: I3cc91364a6747cfcb4c611a9be5258f81562f726
Updates the project level settings to run the formatter
on save on only on the edited lines.
Change-Id: I26dd69d0c95e6d73f9fdf7031f3c1dbf3becbb79
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Update a number of calling sites of RevWalk to ensure the walker's
internal ObjectReader is released after the walk is no longer used.
Because the ObjectReader is likely to hold onto a native resource
like an Inflater, we don't want to leak them outside of their
useful scope.
Where possible we also try to share ObjectReaders across several
walk pools, or between a walker and a PackWriter. This permits
the ObjectReader to actually do some caching if it felt inclined
to do so.
Not everything was updated, we'll probably need to come back and
update even more call sites, but these are some of the biggest
offenders. Test cases in particular aren't updated. My plan is to
move most storage-agnostic tests onto some purely in-memory storage
solution that doesn't do compression.
Change-Id: I04087ec79faeea208b19848939898ad7172b6672
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Move FileRepository to storage.file.FileRepository
This move isolates all of the local file specific implementation code
into a single package, where their package-private methods and support
classes are properly hidden away from the rest of the core library.
Because of the sheer number of files impacted, I have limited this
change to only the renames and the updated imports.
Change-Id: Icca4884e1a418f83f8b617d0c4c78b73d8a4bd17
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some types of repositories might not be stored on local disk. For
these, they will most likely return null for getDirectory() as the
java.io.File type cannot describe where their storage is, its not
in the host's filesystem.
Document that getDirectory() can return null now, and update all
current non-test callers in JGit that might run into problems on
such repositories. For the most part, just act like its bare.
Change-Id: I061236a691372a267fd7d41f0550650e165d2066
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
UploadPack: Permit flushing progress messages under smart HTTP
If UploadPack invokes flush() on the output stream we pass it, its
most likely the progress messages coming down the side band stream.
As pack generation can take a while, we want to push that down
at the client as early as we can, to keep the connection alive,
and to let the user know we are still working on their behalf.
Ensure we dump the temporary buffer whenever flush() is invoked,
otherwise the messages don't get sent in a timely fashion to the
user agent (in this case, git fetch).
We specifically don't implement flush() for ReceivePack right now,
as that protocol currently does not provide progress messages to
the user, but it does invoke flush several times, as the different
streams include '0000' type flush-pkts to denote various end points.
Change-Id: I797c90a2c562a416223dc0704785f61ac64e0220
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Matthias Sohn
Shawn O. Pearce
Robin Rosenberg
Chris Aniszczyk