Change-Id: I2b2170c29017993d8cb7a1d3c8cd94fb16c7dd02
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>

The most expensive part of packing a repository for transport to
another system is enumerating all of the objects in the repository.
Once this gets to the size of the linux-2.6 repository (1.8 million
objects), enumeration can take several CPU minutes and costs a lot
of temporary working set memory.

Teach PackWriter to efficiently reuse an existing "cached pack"
by answering a clone request with a thin pack followed by a larger
cached pack appended to the end.  This requires the repository
owner to first construct the cached pack by hand, and record the
tip commits inside of $GIT_DIR/objects/info/cached-packs:

  cd $GIT_DIR
  root=$(git rev-parse master)
  tmp=objects/.tmp-$$
  names=$(echo $root | git pack-objects --keep-true-parents --revs $tmp)
  for n in $names; do
    chmod a-w $tmp-$n.pack $tmp-$n.idx
    touch objects/pack/pack-$n.keep
    mv $tmp-$n.pack objects/pack/pack-$n.pack
    mv $tmp-$n.idx objects/pack/pack-$n.idx
  done

  (echo "+ $root";
   for n in $names; do echo "P $n"; done;
   echo) >>objects/info/cached-packs

  git repack -a -d

When a clone request needs to include $root, the corresponding
cached pack will be copied as-is, rather than enumerating all of
the objects that are reachable from $root.

For a linux-2.6 kernel repository that should be about 376 MiB,
the above process creates two packs of 368 MiB and 38 MiB[1].
This is a local disk usage increase of ~26 MiB, due to reduced
delta compression between the large cached pack and the smaller
recent activity pack.  The overhead is similar to 1 full copy of
the compressed project sources.

With this cached pack in hand, JGit daemon completes a clone request
in 1m17s less time, but a slightly larger data transfer (+2.39 MiB):

  Before:
    remote: Counting objects: 1861830, done
    remote: Finding sources: 100% (1861830/1861830)
    remote: Getting sizes: 100% (88243/88243)
    remote: Compressing objects: 100% (88184/88184)
    Receiving objects: 100% (1861830/1861830), 376.01 MiB | 19.01 MiB/s, done.
    remote: Total 1861830 (delta 4706), reused 1851053 (delta 1553844)
    Resolving deltas: 100% (1564621/1564621), done.

    real  3m19.005s

  After:
    remote: Counting objects: 1601, done
    remote: Counting objects: 1828460, done
    remote: Finding sources: 100% (50475/50475)
    remote: Getting sizes: 100% (18843/18843)
    remote: Compressing objects: 100% (7585/7585)
    remote: Total 1861830 (delta 2407), reused 1856197 (delta 37510)
    Receiving objects: 100% (1861830/1861830), 378.40 MiB | 31.31 MiB/s, done.
    Resolving deltas: 100% (1559477/1559477), done.

    real 2m2.938s

Repository owners can periodically refresh their cached packs by
repacking their repository, folding all newer objects into a larger
cached pack.  Since repacking is already considered to be a normal
Git maintenance activity, this isn't a very big burden.

[1] In this test $root was set back about two weeks.

Change-Id: Ib87131d5c4b5e8c5cacb0f4fe16ff4ece554734b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

CGit pack-objects displays a totals line after the pack data
was fully written.  This can be useful to understand some of
the decisions made by the packer, and has been a great tool
for helping to debug some of that code.

Track some of the basic values, and send it to the client when
packing is done:

  remote: Counting objects: 1826776, done
  remote: Finding sources: 100% (55121/55121)
  remote: Getting sizes: 100% (25654/25654)
  remote: Compressing objects: 100% (11434/11434)
  remote: Total 1861830 (delta 3926), reused 1854705 (delta 38306)
  Receiving objects: 100% (1861830/1861830), 386.03 MiB | 30.32 MiB/s, done.

Change-Id: If3b039017a984ed5d5ae80940ce32bda93652df5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

It isn't strictly necessary to validate every reference's target
object is reachable in the repository before advertising it to a
client. This is an expensive operation when there are thousands of
references, and its very unlikely that a reference uses a missing
object, because garbage collection proceeds from the references and
walks down through the graph. So trying to hide a dangling reference
from clients is relatively pointless.

Even if we are trying to avoid giving a client a corrupt repository,
this simple check isn't sufficient.  It is possible for a reference to
point to a valid commit, but that commit to have a missing blob in its
root tree.  This can be caused by staging a file into the index,
waiting several weeks, then committing that file while also racing
against a prune.  The prune may delete the blob, since its
modification time is more than 2 weeks ago, but retain the commit,
since its modification time is right now.

Such graph corruption is already caught during PackWriter as it
enumerates the graph from the client's want list and digs back
to the roots or common base.  Leave the reference validation also
for that same phase, where we know we have to parse the object to
support the enumeration.

Change-Id: Iee70ead0d3ed2d2fcc980417d09d7a69b05f5c2f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Change-Id: I72cb1cc718800c09366306ab2eebd43cd82023ff
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>

PushCommand now does not set a null credentials provider on
Transport because in this case the default provider is replaced with
null and the default mechanism for providing credentials is not
working.

Bug: 336023
Change-Id: I7a7a9221afcfebe2e1595a5e59641e6c1ae4a207
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>

When MergeMessageFormatter was given a symbolic ref HEAD which points to
refs/heads/master (which is the case when merging a branch in EGit), it
would result in a merge message like the following:

  Merge branch 'a' into HEAD

But it should print the following (as C Git does):

  Merge branch 'a'

The solution is to use the leaf ref when checking for refs/heads/master.

Change-Id: I28ae5713b7e8123a0176fc6d7356e469900e7e97

There is no point in pushing all of the files within the edge
commits into the delta search when making a thin pack.  This floods
the delta search window with objects that are unlikely to be useful
bases for the objects that will be written out, resulting in lower
data compression and higher transfer sizes.

Instead observe the path of a tree or blob that is being pushed
into the outgoing set, and use that path to locate up to WINDOW
ancestor versions from the edge commits.  Push only those objects
into the edgeObjects set, reducing the number of objects seen by the
search window.  This allows PackWriter to only look at ancestors
for the modified files, rather than all files in the project.
Limiting the search to WINDOW size makes sense, because more than
WINDOW edge objects will just skip through the window search as
none of them need to be delta compressed.

To further improve compression, sort edge objects into the front
of the window list, rather than randomly throughout.  This puts
non-edges later in the window and gives them a better chance at
finding their base, since they search backwards through the window.

These changes make a significant difference in the thin-pack:

  Before:
    remote: Counting objects: 144190, done
    remote: Finding sources: 100% (50275/50275)
    remote: Getting sizes: 100% (101405/101405)
    remote: Compressing objects: 100% (7587/7587)
    Receiving objects: 100% (50275/50275), 24.67 MiB | 9.90 MiB/s, done.
    Resolving deltas: 100% (40339/40339), completed with 2218 local objects.

    real    0m30.267s

  After:
    remote: Counting objects: 61549, done
    remote: Finding sources: 100% (50275/50275)
    remote: Getting sizes: 100% (18862/18862)
    remote: Compressing objects: 100% (7588/7588)
    Receiving objects: 100% (50275/50275), 11.04 MiB | 3.51 MiB/s, done.
    Resolving deltas: 100% (43160/43160), completed with 5014 local objects.

    real    0m22.170s

The resulting pack is 13.63 MiB smaller, even though it contains the
same exact objects.  82,543 fewer objects had to have their sizes
looked up, which saved about 8s of server CPU time.  2,796 more
objects from the client were used as part of the base object set,
which contributed to the smaller transfer size.

Change-Id: Id01271950432c6960897495b09deab70e33993a9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sigend-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

Some of this code predates making ObjectId.equals() final
and fixing RevObject.equals() to match ObjectId.equals().
It was therefore more complex than it needs to be, because
it tried to work around RevObject's broken equals() rules
by converting to ObjectId in a different collection.

Also combine setUpWalker() and findObjectsToPack() methods,
these can be one method and the code is actually cleaner.

Change-Id: I0f4cf9997cd66d8b6e7f80873979ef1439e507fe
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

The first 'Compressing objects' progress message is wrong, its
actually PackWriter looking up the sizes of each object in the
ObjectDatabase, so objects can be sorted correctly in the later
type-size sort that tries to take advantage of "Linus' Law" to
improve delta compression.

Rename the progress to say 'Getting sizes', which is an accurate
description of what it is doing.

Change-Id: Ida0a052ad2f6e994996189ca12959caab9e556a3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

When compressing objects, don't include the edges in the progress
meter.  These cost almost no CPU time as they are simply pushed into
and popped out of the delta search window.

Change-Id: I7ea19f0263e463c65da34a7e92718c6db1d4a131
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

Enhance the Git API to support cloning repositories.

Bug: 334763
Change-Id: Ibe1191498dceb9cbd1325aed85b4c403db19f41e
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

CGit push clients 1.6.6 and later support progress messages on the
side-band-64k channel during push, as this was introduced to handle
server side hook errors reported over smart HTTP.

Since JGit's delta resolution isn't always as fast as CGit's is,
a user may think the server has crashed and failed to report
status if the user pushed a lot of content and sees no feedback.
Exposing the progress monitor during the resolving deltas phase
will let the user know the server is still making forward progress.

This also helps BasePackPushConnection, which has a bounded timeout
on how long it will wait before assuming the remote server is dead.
Progress messages pushed down the side-band channel will reset the
read timer, helping the connection to stay alive and avoid timing
out before the remote side's work is complete.

Change-Id: I429c825e5a724d2f21c66f95526d9c49edcc6ca9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Non-commits are added to a pending queue, but duplicates are
removed by checking a flag.  During a reset that flag must be
stripped off the old roots, otherwise the caller cannot reuse
the old roots after the reset.

RevWalk already does this correctly for commits, but ObjectWalk
failed to handle the non-commit case itself.

Change-Id: I99e1832bf204eac5a424fdb04f327792e8cded4a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

After consulting with Christian Halstrick, it turned out that the
handling of rebase during pull was implemented incorrectly.

Change-Id: I40f03409e080cdfeceb21460150f5e02a016e7f4
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>

Bug: 335703
Change-Id: Id9713a4849c772e030fca23dd64b993264f28366
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

The new addIfAbsent() method combines get() with add(), but does
it in a single step so that the common case of get() returning null
for a new object can immediately insert the object into the map.

Change-Id: Ib599ab4de13ad67665ccfccf3ece52ba3222bcba
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

This reverts commit f5fe2dca3c.

I regret adding this feature to the public API.  Caches aren't always
the best idea, as they require work to maintain.  Here the cache is
redundant information that must be computed, and when it grows stale
must be removed.  The redundant information takes up more disk space,
about the same size as the pack-*.idx files are.  For the linux-2.6
repository, that's more than 40 MB for a 400 MB repository.  So the
cache is a 10% increase in disk usage.

The entire point of this cache is to improve PackWriter performance,
and only PackWriter performance, and only when sending an initial
clone to a new client.  There may be better ways to optimize this, and
until we have a solid solution, we shouldn't be using a separate cache
in JGit.

Rebase must honor the upstream configuration

branch.<branchname>.rebase

Change-Id: Ic94f263d3f47b630ad75bd5412cb4741bb1109ca
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>

This bug was hidden by an incomplete test: the current Rebase
implementation using the "git rebase -i" pattern does not work
correctly if fast-forwarding is involved. The reason for this is that
the log command does not return any commits in this case.
In addition, a check for already merged commits was introduced to
avoid spurious conflicts.

Change-Id: Ib9898fe0f982fa08e41f1dca9452c43de715fdb6
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>

IOException constructor taking Exception as parameter is
new for JDK 6.

Change-Id: Iec349fc7be9e9fbaeb53841894883c47a98a7b29
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>

java.io.File.mkdir() and mkdirs() report failure as an exceptional
return value false. Fix the code which silently ignored this
exceptional return value.

Change-Id: I41244f4b9d66176e68e2c07e2329cf08492f8619
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

DirCacheCheckout.checkoutEntry() prepares the new file content using a
temporary file and then renames it to the file to be written during
checkout. For files to be updated checkout() created each file before
calling checkoutEntry(). Hence renaming the temporary file always
failed which was corrected in exception handling by retrying to rename
the file after deleting the just newly created file.

Change-Id: I219f864f2ed8d68051d7b5955d0659964fa27274
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Counting the objects needed for packing is the most expensive part of
an UploadPack request that has no uninteresting objects (otherwise
known as an initial clone).  During this phase the PackWriter is
enumerating the entire set of objects in this repository, so they can
be sent to the client for their new clone.

Allow the ObjectReader (and therefore the underlying storage system)
to keep a cached list of all reachable objects from a small number of
points in the project's history.  If one of those points is reached
during enumeration of the commit graph, most objects are obtained from
the cached list instead of direct traversal.

PackWriter uses the list by discarding the current object lists and
restarting a traversal from all refs but marking the object list name
as uninteresting.  This allows PackWriter to enumerate all objects
that are more recent than the list creation, or that were on side
branches that the list does not include.

However, ObjectWalk tags all of the trees and commits within the list
commit as UNINTERESTING, which would normally cause PackWriter to
construct a thin pack that excludes these objects.  To avoid that,
addObject() was refactored to allow this list-based enumeration to
always include an object, even if it has been tagged UNINTERESTING by
the ObjectWalk.  This implies the list-based enumeration may only be
used for initial clones, where all objects are being sent.

The UNINTERESTING labeling occurs because StartGenerator always
enables the BoundaryGenerator if the walker is an ObjectWalk and a
commit was marked UNINTERESTING, even if RevSort.BOUNDARY was not
enabled.  This is the default reasonable behavior for an ObjectWalk,
but isn't desired here in PackWriter with the list-based enumeration.
Rather than trying to change all of this behavior, PackWriter works
around it.

Because the list name commit's immediate files and trees were all
enumerated before the list enumeration itself starts (and are also
within the list itself) PackWriter runs the risk of adding the same
objects to its ObjectIdSubclassMap twice.  Since this breaks the
internal map data structure (and also may cause the object to transmit
twice), PackWriter needs to use a new "added" RevFlag to track whether
or not an object has been put into the outgoing list yet.

Change-Id: Ie99ed4d969a6bb20cc2528ac6b8fb91043cee071
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

It can be very handy for the implementation to resort the
object list based on data locality, improving prefetch in
the operating system's buffer cache.

Export the list to the implementation was a proper List,
and document that its mutable and OK to be modified.  The
only caller in PackWriter is already OK with these rules.

Change-Id: I3f51cf4388898917b2be36670587a5aee902ff10
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

When performing an initial clone of a repository there are no
uninteresting commits, and the resulting pack will be completely
self-contained.  Therefore PackWriter does not need to honor C
Git standard TOPO ordering as described in JGit commit ba984ba2e0
("Fix checkReferencedIsReachable to use correct base list").

Switching to COMMIT_TIME_DESC when there are no uninteresting commits
allows the "Counting objects" phase to emit progress earlier, as the
RevWalk will not buffer the commit list.  When TOPO is set the RevWalk
enumerates all commits first, before outputing any for PackWriter to
mark progress updates from.

Change-Id: If2b6a9903b536c7fb3c45f85d0a67ff6c6e66f22
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

These two methods are specific to the FileRepository implementation
and should not be exposed as part of the base Repository API.  Now
that PackParser is generic and does not require these two methods
to import a pack stream into a repostiory, it is safe to remove
these and get them out of the public view.

Change-Id: I8990004d08074657f467849dabfdaa7e6674e69a
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

This problem surfaced since EGit Core ResetOperationTest is failing
since change I26806d21. JGit detected checkout conflict for untracked
files which never were tracked by the repository. 

"git reset --hard" in c git also doesn't remove such untracked files.

Change-Id: Icc8e1c548ecf6ed48bd2979c81eeb6f578d347bd
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Change-Id: I170685e70d9ac09a010df69d26ec1c38bde60174
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

This information is generally useful - have followed the
accessor pattern of 'children' and 'parents'

Change-Id: I79b3ddd6f390152aa49e6b7a4c72a4aca0d6bc72
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

The change Ie0350e032a97e0d09626d6143c5c692873a5f6a2 was not
done properly. The renamed file was not write protected, and
this broke a test.

Bug: 335388
Change-Id: I41b2235b7677bc5fddc70dda2a56cdd2cb53ce5d
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>

This is needed for implementing Fetch in EGit using the API.

Change-Id: Ibdcc95906ef0f93e3798ae20d4de353fb394f2e2
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>

When DirCacheCheckout was checking out it was silently
overwriting untracked files. This is only ok if the
files are also ignored. Untracked and not ignored files
should not be overwritten. This fix adds checks for
this situation.
Because this change in the behaviour also broke tests
which expected that a checkout will overwrite untracked
files (PullCommandTest) these tests have to be modified
also.

Bug: 333093
Change-Id: I26806d2108ceb64c51abaa877e11b584bf527fc9
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

We cannot always rename read-only files on network shares,
so rename the temp file for a new loose object first, and
then set it as read-only.

Bug: 335388
Change-Id: Ie0350e032a97e0d09626d6143c5c692873a5f6a2
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

Change-Id: I984836ea7d6a67fd2d1d05f270afa7c29f30971c
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>

When debugging and enhancing DirCacheCheckout.processEntry() I found
that some of if-statements where hard to read/understand. This
change just splits some long if statements and adds more comments
explaining in which state we are. This change is only a preparation
for followup commits which introduce checks for untracked+ignored
files.

Change-Id: I670ff08310b72c858709b9e395f0aebb4b290a56
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>

If HEAD exists but points to an not-existing branch the merge
command should silently create the missing branch and check
it out. This happens if you pull into freshly initalized repo.
HEAD points to refs/heads/master but refs/heads/master doesn't
exist. If you know merge a commit X into HEAD then the branch
master should be created (pointing to X) the working tree should
be updated to reflect X. That is achieved by checkout with one
tree only (HEAD is missing).

A test for this functionality will come the the next proposal
in PullCommandTest.

Change-Id: Id4a0d56d944e0acebd4b3157428bb50bd3fdd872
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>

Add possibility to disable ssl verification, just as i can do with git
using: git config --global http.sslVerify false

To enable the feature, configure
Window->Preferences->Team->Git->Configuration
and add a new key/value: http.sslVerify=false

When handling repos over https, JGit will then check that flag to see
if security is loose and the ssl verification should be ignored.

Having it implemented as a key/value makes it not too obvious in the
GUI - so the user must know what he/she is doing when adding it. Being
aware of the risks etc.

Bug: 332487
Change-Id: I2a1b8098b5890bf512b8dbe07da41036c0fc9b72
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Reading a repository for millions of missing objects might be very
expensive to perform, especially if the repository is on a network
filesystem or some other costly RPC backend.  A repository owner
might choose to accept some risk in return for better performance,
so allow disabling collision checking when receiving a pack.

Currently there is no way for an end-user to disable this feature.
This is intentional, because it is generally *NOT* a good idea to
skip this check.  Instead this feature is supplied for storage
implementations to bypass the default checking logic, should they
have their own custom routines that is just as effective but can
be handled more efficiently.

Change-Id: I90c801bb40e86412209de0c43e294a28f6a767a5
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

If a pack uses OFS_DELTA only (e.g. its an initial push to a
repository) and PackParser's implementation is broken such that the
delta chain that hangs below a particular object offset is empty, the
entryCount won't match the expected objectCount. Fail fast rather
than claiming the stream was parsed correctly.

The current implementation is not broken as described above.  I broke
the code when I implemented my own new subclass of PackParser (which
incorrectly mucked with the object offset information), leading me to
discover this consistency check was missing.

Change-Id: I07540f0ae1144ef6f3bda48774dbdefb8876e1d3
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

By moving the logic that parses a pack stream from the network (or
a bundle) into a type that can be constructed by an ObjectInserter,
repository implementations have a chance to inject their own logic
for storing object data received into the destination repository.

The API isn't completely generic yet, there are still quite a few
assumptions that the PackParser subclass is storing the data onto
the local filesystem as a single file.  But its about the simplest
split of IndexPack I can come up with without completely ripping
the code apart.

Change-Id: I5b167c9cc6d7a7c56d0197c62c0fd0036a83ec6c
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

RevFilter.include()'s documentation promises the RevCommit's
body is parsed before include is invoked.  This wasn't always
true if the commit was parsed once, had its body discarded,
the RevWalk was reset() and started a new traversal.

Change-Id: Ie5cafde09ae870712b165d8a97a2c9daf90b1dbd
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

This is needed for commands that use Transport internally.

Change-Id: I9417c85255b160723968c647063b9c7e05995ea4
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

Additionally, defined the NoteMap.getNote method which returns a Note
instance.  These changes were necessary to enable implementation of
the NoteMerger interface (the merge method needs to instantiate a
Note) and to enable direct use of NoteMerger which expects instances
of Note class as its paramters.  Implementing creation of code review
summary notes in Gerrit [1] will make use of both of these features.

[1] https://review.source.android.com/#change,20045

Change-Id: I627aefcedcd3434deecd63fa1d3e90e303b385ac
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

Instead of offering only a high-level isModified() method a new
method compareMetadata() is introduced which compares a working tree entry
and a index entry by looking at metadata only. Some use-cases
(e.g. computing the content-id in idBuffer()) may use this new method
instead of isModified().

Change-Id: I4de7501d159889fbac5ae6951f4fef8340461b47
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>

Change-Id: I4f05bdb0c58b039bd379341a6093f06a2cdfec6e
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Change-Id: I24552443710075856540696717ac4068dfe6a7f2
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>

The java.io.File.createNewFile() method for creating new empty files
reports failure by returning false. To ease proper checking of return
values provide a utility method wrapping createNewFile() throwing
IOException on failure.

Change-Id: I42a3dc9d8ff70af62e84de396e6a740050afa896
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

If remote branches are present they can not be added
to the RefMap from the local branches - the two RefMaps
have a different value of 'prefix' and consequently an
IllegalArgumentException is thrown.

Java's user.home is not the same as $HOME so EGit did see the
same global configuration as C Git does.

Bug: 333269
Change-Id: Id54fc5292bf8c5a67177f9097ee692717a7df336
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>