We observe in Gerrit 2.12 that useCnt can become negative in rare cases.
Log this to help finding the bug.
Change-Id: Ie91c7f9d190a5d7cf4733d4bf84124d119ca20f7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When Repository.close() decrements the useCount to 0 currently the cache
immediately evicts the repository from WindowCache and RepositoryCache.
This leads to I/O overhead on busy repositories because pack files and
references are inserted and deleted from the cache frequently.
This commit defers the eviction of a repository from the caches until
last use of the repository is older than time to live. The eviction is
handled by a background task running periodically.
Add two new configuration parameters:
* core.repositoryCacheExpireAfter: cache entries are evicted if the
cache entry wasn't accessed longer than this time in milliseconds
* core.repositoryCacheCleanupDelay: defines the interval in milliseconds
for running a background task evicting expired cache entries. If set to
-1 the delay is set to min(repositoryCacheExpireAfter, 10 minutes). If
set to 0 the time based eviction is switched off and no background task
is started. If time based eviction is switched off the JVM can still
evict cache entries if heap memory is running low.
Change-Id: I4a0214ad8b4a193985dda6a0ade63b70bdb948d7
Also-by: Matthias Sohn <matthias.sohn@sap.com>
Also-by: Hugo Arès <hugo.ares@ericsson.com>
Also-by: Sasa Zivkov <sasa.zivkov@sap.com>
Config load should not fail on unsupported or nonexistent include path
1f86350 added initial support for include.path. Relative path and path
with tilde are not yet supported but config load was failing if one of
those 2 unsupported options was encountered. Another problem was that
config load was failing if the include.path file did not exist.
Change the behavior to be consistent with native git. Ignore unsupported
or nonexistent include.path.
Bug: 495505
Bug: 496732
Change-Id: I7285d0e7abb6389ba6983e9c46021bea4344af68
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Allow using JDK 7 bootclasspath when compiling JGit using Java 8
When compiling jgit using Java 8 set system property JDK_HOME to
JAVA_HOME path of JDK7 installation to compile against JDK 7 class
libraries. Otherwise jgit may hit runtime exceptions when running on
Java 7 (e.g. return type of ConcurrentHashMap.keySet() in JDK 8 class
library doesn't exist in JDK 7).
Example:
$ mvn clean install -DJDK_HOME=/.../jdk1.7.0_80.jdk/Contents/Home
Bug: 496262
Change-Id: Ib6abe5e544e0492e08b342e1a34b182caf25f94f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
RefDirectory: remove ref lock file for following ref dir removal
Before this fix, ref directory removal did not work. That was because
the ref lock file was still in the leaf directory at deletion time.
Hence no deep ref directories were ever deleted, which negatively
impacted performance under large directory structure circumstances.
This fix removes the ref lock file before attempting to delete the ref
directory (which includes it). The other deep parent directories are
therefore now successfully deleted in turn, since leaf's content
(lock file) gets removed first.
So, given a structure such as refs/any/directory[/**], this fix now
deletes all empty directories up to -and including- 'directory'. The
'any' directory (e.g.) does not get deleted even if empty, as before.
The ref lock file is still also removed in the calling block's finally
clause, just in case, as before. Such double-unlock brought by this
fix is harmless (a no-op).
A new (private) RefDirectory#delete method is introduced to support
this #pack-specific case; other RefDirectory#delete callers remain
untouched.
Change-Id: I47ba1eeb9bcf0cb93d2ed105d84fea2dac756a5a
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
* master:
Fix javadoc errors and unused imports introduced by ddd0fe25
RepoCommand: record manifest shallow recommendation in .gitmodules
RepoCommand: record manifest groups as submodule labels
Remove the deprecated TestRepository.getClock() method
Replace use of deprecated method Repository.getRef()
[findBugs] Prevent potential NPE in
FileLfsRepository.getOutputStream()
Better report on client side if push failed due to too large object
[findBugs] Prevent potential NPE in CloneCommand.init()
RepoCommand: remove --record-remote-branches
RepoCommandTest: Improve assertion message for remote branch recording
Change-Id: I4fbce4f84925a933fcc9a48058ed6793f5821b97
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
RepoCommand: record manifest shallow recommendation in .gitmodules
Git core learned about the submodule.<name>.shallow option in
.gitmodules files, which is a recommendation to clone a submodule
shallow. A repo manifest may record a clone depth recommendation as
an optional field, which contains more information than a binary
shallow/nonshallow recommendation, so any attempted conversion may be
lossy. In practice the clone depth recommendation is either '1' or doesn't
exist, which is the binary behavior we have in Git core.
Change-Id: I51aa9cb6d1d9660dae6ab6d21ad7bae9bc5325e6
Signed-off-by: Stefan Beller <sbeller@google.com>
RepoCommand: record manifest groups as submodule labels
Git core learned about attributes in pathspecs:
pathspec: allow querying for attributes
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
(177161a5f7, 2016-05-20)
We intend to use these pathspec attribute patterns for submodule
grouping, similar to the grouping in repo. So the RepoCommand which
translates repo manifest files into submodules should propagate this
information along. This requires writing information to the
.gitattributes file instead of the .gitmodules file. For now we just
overwrite any existing .gitattributes file and do not care about prior
attributes set. If this becomes an issue we need to figure out how to
correctly amend the grouping information to an existing .gitattributes
file.
Change-Id: I0f55b45786b6b8fc3d5be62d7f6aab9ac00ed60e
Signed-off-by: Stefan Beller <sbeller@google.com>
Better report on client side if push failed due to too large object
JGits PushCommand and BasePackPushConnection were throwing a generic
exception when the pushed pack-file was rejected by the server since it
contained too large objects. Teach JGit to better analyze the server's
response to detect this situation and throw a more specific exception.
Detect this situation by parsing the status line sent by the server.
This change only recognizes the response sent by a JGit based server.
All other servers which report such problems in a different way still
lead to a generic TransportExceptions.
Also see https://git.eclipse.org/r/#/c/46348/
Change-Id: I8d6d65e4585ebb3846f7207e7d1a2f82fa9cbd86
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
[findBugs] Prevent potential NPE in CloneCommand.init()
File.listFiles() returns null if the File is not a directory, improve
validation of directory and gitDir to fix this.
Change-Id: I763d08835faf96a0beb8e706992df0908526bd2c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This function only works in bare mode, and the command line works in
non-bare mode, so there's no point in pretending to support it here.
Change-Id: Ia017aded93d072bdb9947ec08c424256c3abe438
Signed-off-by: Stefan Beller <sbeller@google.com>
* master:
JGit CLI: allow to call git init with specific directory
Redirect all Show output to outs
Support git config [include] section with absolute path(s)
Added filter for merge and non-merges commits.
[findBugs] Prevent potential NPE in FS_POSIX.readUmask()
[findBugs] Fix calculation of host header in SignerV4
Update Orbit repository to S20160518051658 for Neon RC2
Fix StashApply regarding handling of untracked files
GC should not pack objects only referenced by ORIG_HEAD,...
Make sure to overwrite files when "reset --hard" detects conflicts
Allow setting FileMode to executable when applying patches in
ApplyCommand
Fix config value get to return last instead of 1st just like git
Remove UTF-8 checking duplication in Config lib subclasses
Update Maven plugins
Fix type parameter in javadoc in TestRepository.delete(String ref)
TestRepository: Add delete() method
Make BaseReceivePack.setAtomic public
ReceivePack: Pass atomic setting from client to BatchRefUpdate
Change-Id: I5c9c5b7ccb23fb48b44b3da10b2c5d876d043d24
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.3:
Fix computation of id in WorkingTreeIterator with autocrlf and
smudging
Prepare 4.3.2-SNAPSHOT builds
JGit v4.3.1.201605051710-r
Scan loose ref before packed in case gc about to remove the loose
Fix possible NPEs when reporting transport errors
Fix calling of clean/smudge filters from Checkout,MergeCommands
Fix ApplyCommand when result of patch is an empty file
Change-Id: I829f06699f6670e519d04c927bdba4b82df29199
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix computation of id in WorkingTreeIterator with autocrlf and smudging
JGit failed to do checkouts when the index contained smudged entries and
autocrlf was on. In such cases the WorkingTreeIterator calculated the
SHA1 sometimes on content which was not correctly filtered. The SHA1 was
computed on content which two times went through a lf->crlf conversion.
We used to tell the treewalk whether it is a checkin or checkout
operation and always use the related filters when reading any content.
If on windows and autocrlf is true and we do a checkout operation then
we always used a lf->crlf conversion on any text content. That's not
correct. Even during a checkout we sometimes need the crlf->lf
conversion. E.g. when calculating the content-id for working-tree
content we need to use crlf->lf filtering although the overall operation
type is checkout.
Often this bug does not have effects because we seldom compute the
content-id of filesystem content during a checkout. But we do need to
know whether a file is dirty or not before we overwrite it during a
checkout. And if the index entries are smudged we don't trust the index
and compute filesystem-content-sha1's explicitly.
This caused EGit not to be able to switch branches anymore on Windows
when autocrlf was true. EGit denied the checkout because it thought
workingtree files are dirty because content-sha1 are computed on wrongly
filtered content.
Bug: 493360
Change-Id: I1072a57b4c529ba3aaa50b7b02d2b816bb64a9b8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit CLI: allow to call git init with specific directory
With this change it is possible to initialize repositories with
'git init /path/to/new/repo'
Change-Id: Ia9b288b4fb34887e8f5e2f3f270e521c44d41b6a
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The Show command wrote all diffs to System.out instead of 'outs.
Bug: 494143
Change-Id: Ibc78e9a058b7a32d536e03e294c1d933b6c26ba7
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Support git config [include] section with absolute path(s)
As per [1], but limited to absolute paths indeed. No support yet for
tilde or $HOME expansion. Support for the --[no-]includes options
([1]) is not part of this commit scope either, but those options'
defaults are in effect as described in [1].
[1] https://git-scm.com/docs/git-config
Included path can be a config file that includes other path-s in turn.
An exception is thrown if too many recursions (circular includes)
happen because of ill-specified config files.
Change-Id: I700bd7b7e1625eb7de0180f220c707d8e7b0930b
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Added the option to retrieve either merge or non-merge commits in the
LogCommand.
Change-Id: Ie0e1c515a823f2392783f1a47d385c31230e8167
Signed-off-by: Alcemir Santos <alcemir.santos@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
[findBugs] Prevent potential NPE in FS_POSIX.readUmask()
BufferedReader.readLine() returns null if the end of the stream has been
reached.
Change-Id: I83102bbfb1316407247e0f29023077af9e8d9606
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
[findBugs] Fix calculation of host header in SignerV4
We ignored the returned concatenation of host name and port number. Fix
this and use a StringBuilder to avoid creation of unnecessary String
objects.
Change-Id: I61fac639d4a4c95412eb41a0f9131d0c38aca794
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix StashApply regarding handling of untracked files
There was a bug regarding how JGit handled untracked files when applying
a stash. Problem was that untracked files are applied by doing a merge
of HEAD and untrackedFiles commit with a merge base of the stashed HEAD.
That's wrong because the untrackedFiles commit has no parent and
contains only the untracked files. Using stashed HEAD as merge base
leads to unneccessary conflicts on files not event included in the
untrackedFiles commit.
Imagine this graph directly before you want to apply a stash which was
based on 0. You want to apply the stash on current HEAD commit 5.
5 (HEAD,master)
/
0---+
\ \
1---3 (WIP on master)
/
2 (untracked files on master)
Imagine for a specific (tracked) file f
- commit 0 contains X
- HEAD contains Y
- commit 2 (the untracked files) does not contain file f
A merge of 2 and 5 with a merge base of 0 leads to a conflict. The 5
commit wants to modify the file and the 2 commit wants to delete the
file -> conflict.
If no merge base is set then the semantic is correct.
Thanks to Bow for finding this bug and providing the test case.
Bug: 485467
Change-Id: I453fa6ec337f81b2a52c4f51f23044faeec409e6
Also-by: Bow Ruggeri <bow@bow.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
GC should not pack objects only referenced by ORIG_HEAD,...
There are references which are returned by
RefDatabase.getAdditionalRefs() which are allowed to point to
non-existing objects. These refs should not save objects from being
garbage collected. Examples for these references are ORIG_HEAD,
MERGE_HEAD, FETCH_HEAD and CHERRY_PICK_HEAD. Native git will not take
these references into account when doing a gc and therefore these
references may point to non-existing objects after a gc. Teach JGit's
GC to behave the same: ignore additional refs if they don't start with
"refs/". Examples for refs returned by getAdditionalRefs() which do
start with "refs/" are the bootstrap refs when using reftree's (see
commit 115f1ad397). See also
http://article.gmane.org/gmane.comp.version-control.git/294126.
Bug: 479697
Change-Id: I10e40589f13e72aacdd9f86f3b44696fd1cd068a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Make sure to overwrite files when "reset --hard" detects conflicts
When performing a "reset --hard" a checkout is done. The pathes are
checked for potential checkout conflicts. But in the end for all
remaining conflicts these files are simply deleted from the working
tree. That's not the right strategy to handle checkout conflicts during
"reset --hard". Instead for every conflict we should simply checkout the
merge commit's content.
This is different from native gits behavior which reports errors when
during a "checkout --hard" a file shows up where a folder was expected.
"warning: unable to unlink d/c.txt: Not a directory"
Why it is like that in native git was asked in
http://permalink.gmane.org/gmane.comp.version-control.git/279482. Unless
it is explained why native git why this error is reported JGit should
overwrite the files.
Bug: 474842
Change-Id: I08e23822a577aaf22120c5137eb169b6bd08447b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Allow setting FileMode to executable when applying patches in ApplyCommand
git-apply allows modifying file modes in patched files using either
"new mode" or "new file mode" headers. This patch adds support for
setting files as executables and vice-versa.
Change-Id: I24848966b46f686f540a8efa8150b42e0d9c3ad1
Signed-off-by: Nadav Cohen <nadavcoh@gmail.com>
David Pursehouse
Matthias Sohn
Christian Halstrick
Hugo Arès
Marco Miller
Stefan Beller
Terry Parker
Rüdiger Herrmann
Alcemir Santos
Nadav Cohen