Remove completely the empty directories under refs/<namespace>
including the first level partition of the changes, when they are
completely empty.
Bug: 536777
Change-Id: I88304d34cc42435919c2d1480258684d993dfdca
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
After packaging references, the folders containing these references are
not deleted. In a busy repository, this causes operations to slow down
as traversing the references tree becomes longer.
Delete empty reference folders after the loose references have been
packed.
To avoid deleting a folder that was just created by another concurrent
operation, only delete folders that were not modified in the last 30
seconds.
Signed-off-by: Hector Oswaldo Caballero <hector.caballero@ericsson.com>
Change-Id: Ie79447d6121271cf5e25171be377ea396c7028e0
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If we give Jsch access to the ssh config file, we must _not_ resolve
the host name from the alias. Instead we must give the alias (i.e.,
the host name as is in the URI) to Jsch, so that it finds the same
ssh config entry.
Otherwise if the hostname in the URI, which is taken as an alias in
ssh config ("Host" line), is unequal to the "Hostname" line, and
there happens to be another ssh config entry with that translated
host name as alias, Jsch will pick up that second entry, and we end
up with a strange mixture of both.
Add tests for this case.
Bug: 531118
Change-Id: I249d8c073b0190ed110a69dca5b9be2a749822c3
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Jsch overrides the port in the URI with the one in ~/.ssh/config
Jsch unconditionally overwrites the port from the ssh config
file (if a port is specified there), even if the URI explicitly does
give a different port.
Fix this, and add tests.
Change-Id: I7b014543c7ece26270e366db39d7647f82d64f0d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Revert handling of ssh IdentityFile to pre-4.9 behavior
Jsch caches keys (aka identities) specified in ~/.ssh/config via
IndentityFile only for the current Jsch Session. This results in
multiple password prompts for successive sessions.
Do the handling of IdentityFile exclusively in JGit, as it was before
4.9. JGit uses different Jsch instances per host and caches the
IdentityFile there, allowing it to be re-used in different sessions
for the same host.
* Add comments to explain this.
* Move the JschBugFixingConfig from OpenSshConfig to
JschConfigSessionFactory to have all these Jsch work-arounds
in one place.
* Make that config hide the IdentityFile config from Jsch to avoid
that Jsch overrides the JGit behavior.
Bug: 529173
Change-Id: Ib36c34a2921ba736adeb64de71323c2b91151613
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Strings#convertGlob: fix escaping of patterns like [\[].
Originally the patterns were escaped twice leading
to wrong matching results.
Bug: 528886
Change-Id: I26e201b4b0ef51cac08f940b76f381260fa925ca
Signed-off-by: Dmitry Pavlenko <pavlenko@tmatesoft.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
PackInserter: Ensure objects are written at the end of the pack
When interleaving reads and writes from an unflushed pack, we forgot to
reset the file pointer back to the end of the file before writing more
new objects. This had at least two unfortunate effects:
* The pack data was potentially corrupt, since we could overwrite
previous portions of the file willy-nilly.
* The CountingOutputStream would report more bytes read than the size
of the file, which stored the wrong PackedObjectInfo, which would
cause EOFs during reading.
We already had a test in PackInserterTest which was supposed to catch
bugs like this, by interleaving reads and writes. Unfortunately, it
didn't catch the bug, since as an implementation detail we always read a
full buffer's worth of data from the file when inflating during
readback. If the size of the file was less than the offset of the object
we were reading back plus one buffer (8192 bytes), we would completely
accidentally end up back in the right place in the file.
So, add another test for this case where we read back a small object
positioned before a large object. Before the fix, this test exhibited
exactly the "Unexpected EOF" error reported at crbug.com/gerrit/7668.
Change-Id: I74f08f3d5d9046781d59e5bd7c84916ff8225c3b
The Config class must be safe to run against untrusted input files.
Reading arbitrary local system paths using include.path is risky for
servers, including Gerrit Code Review.
This was fixed on master [1] by making "readIncludedConfig" a noop
by default. This allows only FileBasedConfig, which originated from
local disk, to read local system paths.
However, the "readIncludedConfig" method was only introduced in [2]
which was needed by [3], both of which are only on the master branch.
On the stable branch only Config supports includes. Therefore this
commit simply disables the include functionality.
[1] https://git.eclipse.org/r/#/c/113371/
[2] https://git.eclipse.org/r/#/c/111847/
[3] https://git.eclipse.org/r/#/c/111848/
Bug: 528781
Change-Id: I9a3be3f1d07c4b6772bff535a2556e699a61381c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When a GC operation is interrupted, temporary packs and indexes can be
left on the pack folder. In big, busy repositories this can lead to
significant amounts of wasted disk space if this interruption is done
with a certain frequency.
Remove stale temporary packs and indexes at the end of the GC process so
they do not accumulate. To avoid interfering with a possible concurrent
JGit GC process in the same repository, only delete temporary files that
are older than one day.
Change-Id: If9b6c1e57fac8a6a0ecc0a703089634caba4caae
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>
Ignore warning for minor version change without API change
- this is a new warning option in Eclipse 4.7 and higher
- we always change version of all bundles in a release to keep release
engineering simple
Change-Id: Ic7523d77b67b2802f1bab3bc70af250d712a034f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Jsch 0.1.54 passes on the values from ~/.ssh/config for
"ServerAliveInterval" and "ConnectTimeout" as read from
the config file to java.net.Socket.setSoTimeout(). That
method expects milliseconds, but the values in the config
file are seconds!
The missing conversion in Jsch means that the timeout is
set way too low, and if the server doesn't respond within
that very short time frame, Jsch kills the connection and
then throws an exception with a message such as "session is
down" or "timeout in waiting for rekeying process".
As a work-around, do the conversion to milliseconds in the
Jsch-facing Config interface of OpenSshConfig. That way Jsch
already gets these values as milliseconds.
Bug: 526867
Change-Id: Ibc9b93f7722fffe10f3e770dfe7fdabfb3b97e74
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Applications that use ObjectInserters to create lots of individual
objects may prefer to avoid cluttering up the object directory with
loose objects. Add a specialized inserter implementation that produces a
single pack file no matter how many objects. This inserter is loosely
based on the existing DfsInserter implementation, but is simpler since
we don't need to buffer blocks in memory before writing to storage.
An alternative for such applications would be to write out the loose
objects and then repack just those objects later. This operation is not
currently supported with the GC class, which always repacks existing
packs when compacting loose objects. This in turn requires more
CPU-intensive reachability checks and extra I/O to copy objects from old
packs to new packs.
So, the choice was between implementing a new variant of repack, or not
writing loose objects in the first place. The latter approach is likely
less code overall, and avoids unnecessary I/O at runtime.
The current implementation does not yet support newReader() for reading
back objects.
Change-Id: I2074418f4e65853b7113de5eaced3a6b037d1a17
Avoid bad rounding "1 year, 12 months" in date formatter
Round first, then calculate the labels. This avoids "x years, 12 months"
and instead produces "x+1 years".
One test case has been added for the original example the bug was found
with, and one assertion has been moved from an existing test case to the
new test case, since it also triggered the bug.
Bug: 525907
Change-Id: I3270af3850c4fb7bae9123a0a6582f93055c9780
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Ensure that ~ in ssh config is replaced before Jsch sees it
Do tilde replacement for values from the ssh config file that are
file names in all cases to make sure that they are already replaced
when Jsch tries to get the values.
Previously, OpenSshConfig did tilde replacement only for the
IdentityFile in the JGit-facing "Host" interface and left the
replacement in the Jsch-facing "Config" interface to Jsch.
But on Windows the JGit notion of what should be used to replace the
tilde differs from Jsch's replacement. Jsch always replaces the tilde
by the value of the system property "user.home", whereas JGit also
considers some environment variables like %HOME%. This can lead to
rather surprising failures as in the case of bug 526175 where
%HOME% != user.home.
Prior to commit 9d24470 (i.e.,prior to JGit 4.9.0) this problem never
occurred because Jsch was completely unaware of the ssh config file
and all host and IdentityFile handling happened exclusively in JGit.
Bug: 526175
Change-Id: I1511699664ffea07cb58ed751cfdb79b15e3a99e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use a new RevWalk for validating not advertised wants
Shadow commits in the RevWalk in the UploadPack object may cause the
UNINTERESTING flag not being carried over to their parents commits since
they were marked NO_PARENTS during the assumeShallow or
initializeShallowCommits call.
A new RevWalk needs to be created for this reason, but instead of
creating a new RevWalk from Repository, we can reuse the ObjectReader in
the RevWalk of UploadPack to load objects.
Change-Id: Ic3fee0512d35b4f555c60e696a880f8b192e4439
Signed-off-by: Zhen Chen <czhen@google.com>
ReflogWriter: Align auto-creation defaults with C git
Per git-config(1), core.logAllRefUpdates auto-creates reflogs for HEAD
and for refs under heads, notes, tags, and for HEAD. Add notes and
remove stash from ReflogWriter#shouldAutoCreateLog. Explicitly force
writing reflogs for refs/stash at call sites, now that this is
supported.
Change-Id: I3a46d2c2703b7c243e0ee2bbf6948279800c485c
Support force writing reflog on a per-update basis
Even if a repository has core.logAllRefUpdates=true, ReflogWriter does
not create reflog files unless the refs are under a hard-coded list of
prefixes, or unless the forceWrite bit is set. Expose the forceWrite bit
on a per-update basis in RefUpdate/BatchRefUpdate/ReceiveCommand,
creating RefLogWriters as necessary.
Change-Id: Ifc851fba00f76bf56d4134f821d0576b37810f80
Ensure ReflogWriter only works with a RefDirectory
The ReflogWriter constructor just took a Repository and called
getDirectory() on it to figure out the reflog dirs, but not all
Repository instances use this storage format for reflogs, so it's
incorrect to attempt to use ReflogWriter when there is not a
RefDirectory directly involved. In practice, ReflogWriter was mostly
only used by the implementation of RefDirectory, so enforcing this is
mostly just shuffling around calls in the same internal package.
The one exception is StashDropCommand, which writes to a reflog lock
file directly. This was a reasonable implementation decision, because
there is no general reflog interface in JGit beyond using
(Batch)RefUpdate to write new entries to the reflog. So to implement
"git stash drop <N>", which removes an arbitrary element from the
reflog, it's fair to fall back to the RefDirectory implementation.
Creating and using a more general interface is well beyond the scope of
this change.
That said, the old behavior of writing out the reflog file even if
that's not the reflog format used by the given Repository is clearly
wrong. Fail fast in this case instead.
Change-Id: I9bd4b047bc3e28a5607fd346ec2400dde9151730
This test was never being run. Since it was introduced it was
named "notest.." which meant it didn't run with JUnit3, and
since it is not annotated @Test it also doesn't run with JUnit4.
When compiling with Bazel 0.6.0, error-prone raises an error
that the public method is not annotated with @Ignore or @Test.
Given that the test has never been run anyway, we can just
remove it.
Bug: 525415
Change-Id: Ie9a54f89fe42e0c201f547ff54ff1d419ce37864
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Git has a rather elaborate mechanism to specify HTTP configuration
options per URL, based on pattern matching the URL against "http"
subsection names.[1] The URLs used for this matching are always the
original URLs; redirected URLs do not participate.
* Scheme and host must match exactly case-insensitively.
* An optional user name must match exactly.
* Ports must match exactly after default ports have been filled in.
* The path of a subsection, if any, must match a segment prefix of
the path of the URL.
* Matches with user name take precedence over equal-length path
matches without, but longer path matches are preferred over
shorter matches with user name.
Implement this for JGit. Factor out the HttpConfig from TransportHttp
and implement the matching and override mechanism.
The set of supported settings is still the same; JGit currently
supports only followRedirects, postBuffer, and sslVerify, plus the
JGit-specific maxRedirects key.
Add tests for path normalization and prefix matching only on segment
separators, and use the new mechanism in SmartClientSmartServerSslTest
to disable sslVerify selectively for only the test server URLs.
Compare also bug 374703 and bug 465492. With this commit it would be
possible to set sslVerify to false for only the git server using a
self-signed certificate instead of having to switch it off globally
via http.sslVerify.
[1] https://git-scm.com/docs/git-config
Change-Id: I42a3c2399cb937cd7884116a2a32fcaa7a418fcb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add PushConfig class with PushRecurseSubmodulesMode
This will be used later when adding for support for recursing
submodules on push.
Change-Id: Ie2a183e5404a32046de9f6524e6ceeec37919671
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Fix missing RefsChangedEvent when packed refs are used
With atomic ref updates using packed refs, JGit did not fire a
RefsChangedEvent. This resulted in a user-visible regression in
EGit: the UI would not update after a "Fetch from upstream...".
Presumably it would also make Gerrit miss out on ref changes?
Strengthen the BatchRefUpdateTest by also asserting the expected
number of RefsChangedEvents, and ensure modCnt is incremented in
RefDirectory.commitPackedRefs() when refs really changed (as opposed
to some internal housekeeping operation, such as packing loose refs).
Bug: 521296
Change-Id: Ia985bda1d99f45a5f89c8020ca4845e7a66e743e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Much of the time the caller can specify a RefSpec succinctly using a
string, and doesn't care about calling setters. Add a convenience method
for this case, and use it where applicable in JGit core.
Change-Id: Ic3fac7fc568eee4759236a5264d2e7e5f9b9716d
ReceivePack: clear advertised .haves if application changes refs
An application can choose to invoke setAdvertisedRefs multiple times,
for example several AdvertiseRefsHook installed in a chain. Each of
these invocations populates the advertisedHaves collection with the
unique set of ObjectIds.
This can lead to a server over-advertising with ".have" lines if the
first hook pushes in a lot of references, and the second hook filters
this to a subset. ReceivePack will advertise the unique objects from
the first hook using ".have" lines, which may lead to a huge
advertisement sent to the client.
This can also contribute to a very slow connectivity check after the
pack is parsed as ReceivePack calls markUninteresting on every commit
in advertisedHaves. This may require expanding a lot of subtrees to
mark all trees as uninteresting as well. On a very big repository
this can lead to a many-second stall.
Clear the advertisedHaves collection any time the refs are updated.
Add a test to verify the correct set of objects was sent.
Change-Id: I97f6998d0597251444a2e846a3ea1f461bae96f9
ObjectCheckerTest: Factor duplicate instances out to constants
The tests:
- testCheckBlobNotCorrupt
- testCheckBlobCorrupt
create instances of ObjectChecker that are the same.
The tests:
- testCheckBlobWithBlobObjectCheckerNotCorrupt
- testCheckBlobWithBlobObjectCheckerCorrupt
also create instances of ObjectChecker that are the same.
Factor these instances out to constants instead of creating them
in the tests.
The `checker` member is still created anew in each test, since some
of the tests change its state.
Change-Id: I2d90263829d01d208632185b1ec2f678ae1a3f4c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
SubmoduleConfigTest: Add additional tests in fetchRecurseToConfigValue
Add tests for "true" and "false" matching to "YES" and "NO".
Change-Id: I58223855022871ac4b21bd34ff6a9cd00fce30a1
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
If a ReftableConfig has been supplied by the caller, write out a
reftable as a sibling of the the GC pack, alongside the heads.
To bootstrap from a non-reftable system, the refs are read from the
DfsRefDatabase if no GC reftables are present. Its assumed the
references are fully current, and do not need to be merged with any
other reftables. Any non-GC reftables will be pruned at the end of
the GC cycle, just like any packs that were replaced.
If a GC reftable is present, all existing reftables are compacted, and
references from DfsRefDatabase are only used to seed the packer. Its
assumed these are consistent with each other.
Change-Id: Ie397eb58aaaefb6865c816d9b39de3ac12998019
Fix Daemon.stop() to actually stop the listener thread
ServerSocket.accept() is not interruptible: a thread busy in accept()
may not react to Thread.interrupt() and may not return from accept()
via an InterruptedException. Close the socket instead to make the
daemon's listener thread terminate.
* Close the listening socket to get the listening thread to exit
instead of interrupting it.
* Add a stopAndWait() method that stops the listening thread and
then waits until it has indeed finished.
* Set SO_REUSE_ADDRESS on the listening socket.
Bug: 376369
Change-Id: I9d6014103e6dcb0173daea134feb44dc52c5c69a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
While parsing .gitmodules, the name of the submodule subsection is
purely arbitrary: it frequently is the path of the submodule, but
there's no requirement for it to be. By building a map of paths to
the section name in .gitmodules, we can more accurately return
the submodule URL.
Bug: 508801
Change-Id: I8399ccada1834d4cc5d023344b97dcf8d5869b16
Also-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Some tests call out to external cgit. Those tests all failed for me
locally on Mac. Turned out that the reason was that the system git
config used by the git in the bazel run contained paths with ~/ but
somehow $HOME was not set. As a result the external git returned
with exit code 128.
Fix this by passing along $HOME explicitly. Also improve assertions
to make sure we do get the stderr of the external command in the
test log.
I hadn't noticed that until now because apparently the maven build
does pass along $HOME.
Change-Id: I7069676d5cc7b23a71e79a4866fe8acab5a405f4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Add dependency to jsch for OpenSshConfigTest to bazel build
Make jsch visible to the test bundle and add the dependency.
Change-Id: I0c49ee9b8f64fe8a8c74d2f08865917eb33069b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Partially revert c0ad77d8 "Enhance Eclipse save actions"
Do not automatically organize imports using a save action since this
seems to be buggy and removed some annotations org.eclipse.jgit.pgm
needs to use args4j.
Change-Id: I5a91292c3b9241ce2dde3e4ecce14ad460097129
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Partially revert c0ad77d8 "Enhance Eclipse save actions"
Revert the following save actions which were introduced in c0ad77d8:
- always use braces around blocks
- remove unused imports
Other than I expected save actions are run globally on edited files -
and not only on edited code lines only.
Hence revert the save action "Convert control statement bodies to
blocks" which would affect a large number of code lines not affected by
the change editing some small part of a class. This would generate a
large number of changes which may lead to many unnecessary conflicts.
Total number of affected lines across jgit would be around 10k lines.
Also revert "Remove unused imports" since it erroneously removes imports
of some annotations needed by pgm classes using args4j.
Change-Id: I879a47f68e664129e6124cf25c1ae1f6a2d7a5aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following Eclipse save actions executed when saving modified
lines. This should help to reduce manual work needed to maintain a clean
and consistent code style:
- organize imports
- always use braces around blocks
- add missing annotations
- @Override including implementation of interface methods
- @Deprecated
- remove
- unused imports
- unnecessary $NON-NLS$ tags
- redundant type arguments
Also add default values for new settings that were introduced in recent
Eclipse versions up to Neon since we updated save rules the last time.
Change-Id: Idc90b249df044d0552f04edf01a5f607c4846f50
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Some repositories can have a policy that do not accept certain blobs. To
check if the incoming pack file contains such blobs, ObjectChecker can
be used. However, this ObjectChecker is not called by PackParser if the
blob is stored as a whole. This is because the object can be so large
that it doesn't fit in memory.
This change introduces BlobObjectChecker. This interface takes chunks of
a blob instead of the entire object. ObjectChecker can optionally return
a BlobObjectChecker. This won't change existing ObjectChecker
implementation; existing implementation continues to receive deltified
blob objects only.
Change-Id: Ic33a92c2de42bd7a89786a4da26b7a648b25218d
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Exclude file matching: fix backtracking on match failures after **
** matching always tries the empty match first. If a mismatch occurs
later, the ** must be extended by exactly one segment and matching must
resume with the matcher following the ** matcher.
Bug: 520920
Change-Id: Id019ad1c773bd645ae92e398021952f8e961f45c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Fix path pattern matching to work also for gitattributes
Path pattern matching for attribute rules is different than matching
for excluded files.
The first difference concerns patterns without slashes. For
gitattributes those must match on the last component only, not on
any earlier segment. This is true also for directory-only patterns.
The second difference concerns directory-only patterns. Those also
must not match on a prefix or segment except the last one. They do
not apply recursively to all files beneath.
And third, matches only on a prefix must match for gitattributes
only if the last matcher was "/**".
Add a new parameter for such path matching to IMatcher.matches() and
pass it through as appropriate (false for gitignore, true for
gitattributes). As far as gitignore is concerned, there is no change.
New tests have been added, and some existing attribute matching tests
have been fixed since they operated on wrong assumptions.
Bug: 508568
Change-Id: Ie825dc2cac8a85a72a7eeb0abb888f3193d21dd2
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Matthias Sohn
Luca Milanesio
Hector Caballero
Dave Borowitz
Thomas Wolf
Dmitry Pavlenko
David Pursehouse
Michael Keppler
Zhen Chen
Shawn Pearce
Masaya Suzuki