BatchRefUpdate: Skip saving conflicting ref names and prefixes in memory
Rather than getting all ref names and prefixes and saving them
in memory to perform the check for conflicting names, rely on
RefDirectory.isNameConflicting as it is no longer an expensive
call after it was optimized in Ie994fc.
The old optimization to save ref names and prefixes in memory
was targeted towards making clones faster. With this change,
the clone performance is unaffected when tests were done with
repos containing many(~500k) refs.
Here are few recorded elapsed times for creating 10 branches
using BatchRefUpdate on NFS based repositories with varying
loose refs count. As seen here, this change helps improve the
BatchRefUpdate performance from O(n^2) to O(1).
loose_refs_count with_change without_change
50 241 ms 310 ms
300 263 ms 1502 ms
1k 181 ms 4241 ms
2k 204 ms 6440 ms
9k 158 ms 25930 ms
20k 154 ms 60443 ms
50k 171 ms 135199 ms
110k 157 ms 329450 ms
160k 209 ms 396328 ms
This update improves the Gerrit notedb migration performance
as it uses BatchRefUpdate to write change meta refs similar to
the test performed above.
Change-Id: I853ac6c7feb4b39c3156c01876b38cbd182accfe
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Avoid having to scan over ALL loose refs to determine if the
name is nested within or is a container of an existing reference.
This can get really expensive if there are too many loose refs.
Instead use exactRef and getRefsByPrefix which scan based on a
prefix.
With a simple shell script(like below) using jgit client to create
1k refs in a new repository on NFS, this change brings down the time
from 12mins to 7mins.
for ref in $(seq 1 1000); do
jgit branch "$ref"
done
Here are few recorded elapsed times to create a new branch on NFS
based repositories with varying loose refs count. As we see here,
this change improves the name conflicting check from O(n^2) to O(1).
loose_refs_count with_change without_change
50 44 ms 164 ms
300 45 ms 1193 ms
1k 38 ms 2610 ms
2k 44 ms 6003 ms
9k 46 ms 27860 ms
20k 45 ms 48591 ms
50k 51 ms 135471 ms
110k 43 ms 294252 ms
160k 52 ms 430976 ms
Change-Id: Ie994fc184b8f82811bfb37b111eb9733dbe3e6e0
Signed-off-by: Kaushik Lingarkar <quic_kaushikl@quicinc.com>
Fix PackInvalidException when fetch and repack run concurrently
We are running several servers with jGit. We need to run repack from
time to time to keep the repos performant. I.e. after push we test how
many small packs are in the repo and when a threshold is reached we run
the repack.
After upgrading jGit version we've found that if someone does the clone
at the time repack is running the clone sometimes (not always) fails
because the repack removes .pack file used by the clone. Server
exception and client error attached.
I've tracked down the cause and it seems to be introduced between jGit
5.2 (which we upgraded from) and 5.3 and being caused by this commit:
Move throw of PackInvalidException outside the catch -
afef866a44
The problem is that when the throw was inside of the try block the last
catch block catched the exception and called openFailed(false) method.
It is true that it called it with invalidate = false, which is wrong.
The real problem though is that with the throw outside of the try block
the openFail is not called at all and the fields activeWindows and
activeCopyRawData are not set to 0. Which affects the later called tests
like: if (++activeCopyRawData == 1 && activeWindows == 0).
The fix for this is relatively simple keeping the throw outside of the
try block and still having the invalid field set to true. I did
exhaustive testing of the change running concurrent clones and pushes
indefinitely and with the patch applied it never fails while without the
patch it takes relatively short to get the error.
See: https://www.eclipse.org/lists/jgit-dev/msg04014.html
Bug: 569349
Change-Id: I9dbf8801c8d3131955ad7124f42b62095d96da54
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
GC#deleteOrphans: handle failure to list files in pack directory
- log an error
- either there is no list or it is incomplete hence return immediately
Change-Id: Ieee5378ca06304056b9ccc30c1acd5f52360052d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If pack or index files are guarded by a pack lock (.keep file)
deleteOrphans() should not touch the respective files protected by the
lock file. Otherwise it may interfere with PackInserter concurrently
inserting a new pack file and its index.
The problem was caused by the following race.
All mentioned files are located in "objects/pack/".
File endings relevant in "pack" dir:
.pack
.keep
.idx
.bitmap
When ReceivePack receives a pack file it executes the following steps:
ReceivePack.service():
receivePackAndCheckConnectivity():
receivePack():
receive the pack
parse the pack, returns packLock (.keep file)
PackInserter.flush():
write tmpPck file: "insert_<random>.pack"
write tmpIdx file: "insert_<random>.idx"
real pack name: "pack-<SHA1>.pack"
real index name: "pack-<SHA1>.idx"
atomic rename tmpPack to realPack
atomic rename tmpIdx to tmpIdx
execute commands
unlock pack by removing .keep file
trigger auto gc if enabled
When PackInserter.flush() renames the temporary pack to the final
"pack-xxx.pack" file the temporary pack index file "insert_xxx.idx"
has no matching .pack file with the same base name for a short interval.
If deleteOrphans() ran during that interval it deduced the pack index
file was orphaned. Subsequently the missing pack index caused
MissingObjectExceptions since objects contained in the pack couldn't be
looked up anymore.
Bug: https://bugs.chromium.org/p/gerrit/issues/detail?id=13544
Change-Id: I559c81e4b1d7c487f92a751bd78b987d32c98719
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix string format parameter for invalidRefAdvertisementLine
The externalized error message added in f4fc640 ("BasePackConnection:
Check for expected length of ref advertisement", Dec 18, 2019) uses a
malformed string format. Since there is only one formatting argument,
it should be referenced with '{0}' rather than '{1}'.
Change-Id: Ibda864dfb0bb902fe07ae4bba73117b212046e8a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
WindowCache: add metric for cached bytes per repository
Since ObjectDatabase and PackFile don't know their repository use the
packfile's grand-grand-parent directory as an identifier for the
repository the packfile resides in.
Remove metric for a repository if the number of cached bytes for the
repository drops to 0 in order to ensure the map of cached bytes per
repository doesn't contain repositories which have no data cached in the
WindowCache.
Change-Id: I969ab8029db0a292e7585cbb36ca0baa797da20b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
WindowCache: add option to use strong refs to reference ByteWindows
Java GC evicts all SoftReferences when the used heap size comes close to
the maximum heap size. This means peaks in heap memory consumption can
flush the complete WindowCache which was observed to have negative
impact on performance of upload-pack in Gerrit.
Hence add a boolean option core.packedGitUseStrongRefs to allow using
strong references to reference packfile pages cached in the WindowCache.
If this option is set to true Java gc can no longer flush the
WindowCache to free memory if the used heap comes close to the maximum
heap size. On the other hand this provides more predictable performance.
Bug: 553573
Change-Id: I9de406293087ab0fa61130c8e0829775762ece8d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Replace usage of ArrayIndexOutOfBoundsException in treewalk
Using exceptions during normal operations - for example with the
desire of expanding an array in the failure case - can have a
severe performance impact. When exceptions are instantiated,
a stack trace is collected. Generating stack trace can be expensive.
Compared to that, checking an array for length - even if done many
times - is cheap since this is a check that can run in just a
handful of CPU cycles.
Change-Id: Ifaf10623f6a876c9faecfa44654c9296315adfcb
Signed-off-by: Patrick Hiesel <hiesel@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add the following statistics
- cache hit count and hit ratio
- cache miss count and miss ratio
- count of successful and failed loads
- rate of failed loads
- load, eviction and request count
- average and total load time
Use LongAdder instead of AtomicLong to implement counters in order to
improve scalability.
Optionally expose these metrics via JMX, they are registered with the
platform MBean server if the config option jmx.WindowCacheStats = true
in the user or system level git config.
Bug: 553573
Change-Id: Ia2d5246ef69b9c2bd594a23934424bc5800774aa
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- filter errors for new APIs added in service release
- remove unused filters
Change-Id: Ifbf532b8a3c46d4ed78a38f6c75073a072b7f669
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Do not rely on ArrayIndexOutOfBoundsException to detect end of input
In the Config#StringReader we relied on ArrayIndexOutOfBoundsException
to detect the end of the input. Creation of exception with (deep) stack
trace can significantly degrade performance in case when we read
thousands of config files, like in the case when Gerrit reads all
external ids from the NoteDb.
Use the buf.length to detect the end of the input.
Change-Id: I12266f25751373a870ce3fa623cf2a95d882d521
WorkingTreeIterator: handle different timestamp resolutions
Older JGit stored only milliseconds timestamps in the index. Newer
JGit may get finer timestamps from the file system. This leads to
slow index diffs when a new JGit runs against an index produced
by older JGit because many timestamps will differ and JGit will
then do many content checks. See [1].
Handle this migration case by only comparing milliseconds if the
index entry has only millisecond precision.
The inverse may also occur; also compare only milliseconds if the
file timestamp has only millisecond precision.
Do the same also for microsecond resolution. On Windows, NTFS may
provide 100ns resolution and may be used by external programs writing
the index, but Java's WindowsFileAttributes may provide only
microseconds.
File timestamp precision in Java depends not only on the Java APIs
used by different JGit versions but may also change when running the
same Java code on different VMs. And of course the resolution may
vary among operating and file systems. Moreover, timestamp precision
in the index depends on the program that wrote the index. Canonical
git may use a different resolution, maybe even different between git
versions.
[1] https://www.eclipse.org/forums/index.php/t/1100344/
Change-Id: Idfd08606c883cb98787b2138f9baf0cc89a57b56
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix WorkingTreeIterator.compareMetadata() for CheckStat.MINIMAL
If CheckStat is MINIMAL or timestamps have no nanosecond part
WorkingTreeIterator.compareMetaData only checks the second part of
timestamps and ignores nanoseconds which may have ended up in the index
by using native git.
If
fileLastModified.getEpochSecond() == cacheLastModified.getEpochSecond()
we currently proceed comparing fileLastModified and cacheLastModified
with full precision which is wrong since we determined that we detected
reduced timestamp resolution.
Fix this and also handle smudged index entries for CheckStat.MINIMAL.
Change-Id: I6149885903ac63d79b42d234cc02aa4e19578f3c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
[error prone] Suppress NonAtomicVolatileUpdate in SimpleLruCache
We don't need to update time atomically since it's only used to order
cache entries in LRU order.
Change-Id: I756fa6d90b180c519bf52925f134763744f2c1f1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
BatchRefUpdate: repro racy atomic update, and fix it
PackedBatchRefUpdate was creating a new packed-refs list that was
potentially unsorted. This would be papered over when the list was
read back from disk in parsePackedRef, which detects unsorted ref
lists on reading, and sorts them. However, the BatchRefUpdate also
installed the new (unsorted) list in-memory in
RefDirectory#packedRefs.
With the timestamp granularity code committed to stable-5.1, we can
more often accurately decide that the packed-refs file is clean, and
will return the erroneous unsorted data more often. Unluckily timed
delays also cause the file to be clean, hence this problem was
exacerbated under load.
The symptom is that refs added by a BatchRefUpdate would stop being
visible directly after they were added. In particular, the Gerrit
integration tests uses BatchRefUpdate in its setup for creating the
Admin group, and then tries to read it out directly afterward.
The tests recreates one failure case. A better approach would be to
revise RefList.Builder, so it detects out-of-order lists and
automatically sorts them.
Fixes https://bugs.eclipse.org/bugs/show_bug.cgi?id=548716 and
https://bugs.chromium.org/p/gerrit/issues/detail?id=11373.
Bug: 548716
Change-Id: I613c8059964513ce2370543620725b540b3cb6d1
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Return a new instance from openSystemConfig and openUserConfig
Move the handling of cached user and system config to getSystemConfig
and getUserConfig methods and revert the implementation of
openSystemConfig and openUserConfig to the old stateless
implementation.
This ensures the open methods respect the passed-in parent config, which
may be different on each invocation. Additionally, returning a new
instance matches the behavior of the previous implementation of the
default system reader, which downstream callers may be depending on.
Move the implementation of the new caching methods getSystemConfig and
getUserConfig up to SystemReader. This avoids that we break the ABI for
subclasses of SystemReader.
Also see [1] which fixed a similar problem with Gerrit's custom
SystemReader.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/225458
Change-Id: If54a2491932d8fc914d4649cb73c9e837c5b8ad0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use AtomicReferences to cache user and system level configs
This ensures that only one instance of user and one instance of system
config is set.
Change-Id: Idd00150f91d2d40af79499dd7bf8ad5940f87c4e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
deleteChildren was called on directory instead of gitDir, leading to a
potential null pointer exception if the git directory existed initially.
Bug: 550340
Change-Id: Iafc3b2961253a99862a59e81c7371f7bc564b412
Signed-off-by: Adrien Bustany <adrien-xx-eclipse@bustany.org>