Git has different conflict resolution strategies:
* There is a tree merge strategy "ours" which just ignores any changes
from theirs ("-s ours"). JGit also has the mirror strategy "theirs"
ignoring any changes from "ours". (This doesn't exist in C git.)
Adapt StashApplyCommand and CherrypickCommand to be able to use those
tree merge strategies.
* For the resolve/recursive tree merge strategies, there are content
conflict resolution strategies "ours" and "theirs", which resolve
any conflict hunks by taking the "ours" or "theirs" hunk. In C git
those correspond to "-Xours" or -Xtheirs". Implement that in
MergeAlgorithm, and add API to set and pass through such a strategy
for resolving content conflicts.
* The "ours/theirs" content conflict resolution strategies also apply
for binary files. Handle these cases in ResolveMerger.
Note that the content conflict resolution strategies ("-X ours/theirs")
do _not_ apply to modify/delete or delete/modify conflicts. Such
conflicts are always reported as conflicts by C git. They do apply,
however, if one side completely clears a file's content.
Bug: 501111
Change-Id: I2c9c170c61c440a2ab9c387991e7a0c3ab960e07
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Enable and fix "Statement unnecessarily nested within else clause" warnings
Since [1] the gerrit project includes jgit as a submodule, and has this
warning enabled, resulting in 100s of warnings in the console.
Also enable the warning here, and fix them.
At the same time, add missing braces around adjacent and nearby one-line
blocks.
[1] https://gerrit-review.googlesource.com/c/gerrit/+/227897
Change-Id: I81df3fc7ed6eedf6874ce1a3bedfa727a1897e4c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Callers should use getRefDatabase().peel(ref) instead since it
doesn't swallow the IOException.
Adapt all trivial callers to user the alternative.
DescribeCommand still uses the deprecated method and is not adapted in
this change since it will require more refactoring to add handling of
the IOException.
Change-Id: I14d4a95a5e0570548753b9fc5c03d024dc3ff832
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Otherwise successful, non-conflicting merges will never get a
Gerrit Change-Id.
Bug: 358206
Change-Id: I9b599ad01d9f7332200c1d81a1ba6ce5ef990ab5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The reason for the change is LFS: when using a lot of LFS files,
checkout can take quite some time on larger repositories. To avoid
"hanging" UI, provide progress reporting.
Also implement (partial) progress reporting for cherry-pick, reset,
revert which are using checkout internally.
The feature is also useful without LFS, so it is independent of it.
Change-Id: I021e764241f3c107eaf2771f6b5785245b146b42
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Send a detailed event on working tree modifications
Currently there is no way to determine the precise changes done
to the working tree by a JGit command. Only the CheckoutCommand
actually provides access to the lists of modified, deleted, and
to-be-deleted files, but those lists may be inaccurate (since they
are determined up-front before the working tree is modified) if
the actual checkout then fails halfway through. Moreover, other
JGit commands that modify the working tree do not offer any way to
figure out which files were changed.
This poses problems for EGit, which may need to refresh parts of the
Eclipse workspace when JGit has done java.io file operations.
Provide the foundations for better file change tracking: the working
tree is modified exclusively in DirCacheCheckout. Make it emit a new
type of RepositoryEvent that lists all files that were modified or
deleted, even if the checkout failed halfway through. We update the
'updated' and 'removed' lists determined up-front in case of file
system problems to reflect the actual state of changes made.
EGit thus can register a listener for these events and then knows
exactly which parts of the Eclipse workspace may need to be refreshed.
Two commands manage checking out individual DirCacheEntries themselves:
checkout specific paths, and applying a stash with untracked files.
Make those two also emit such a new WorkingTreeModifiedEvent.
Furthermore, merges may modify files, and clean, rm, and stash create
may delete files.
CQ: 13969
Bug: 500106
Change-Id: I7a100aee315791fa1201f43bbad61fbae60b35cb
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
- mark parameter to be nullable
- explain that we fallback to value of merge.ff if set to null and to
--ff if also not configured there
Change-Id: Id077763b95195d21543ac637f9939a6d4179e982
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Enable and fix warnings about redundant specification of type arguments
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Enable and fix 'Should be tagged with @Override' warning
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Don't rely on default locale when using toUpperCase() and toLowerCase()
Otherwise these methods may produce unexpected results if used for
strings that are intended to be interpreted locale independently.
Examples are programming language identifiers, protocol keys, and HTML
tags. For instance, "TITLE".toLowerCase() in a Turkish locale returns
"t\u0131tle", where '\u0131' is the LATIN SMALL LETTER DOTLESS I
character.
See
https://docs.oracle.com/javase/8/docs/api/java/lang/String.html#toLowerCase--http://blog.thetaphi.de/2012/07/default-locales-default-charsets-and.html
Bug: 511238
Change-Id: Id8d8f37d84d62239c918b81f8d883ed798d87656
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
With the auto option, gc checks whether any housekeeping is required; if
not, it exits without performing any work. Some JGit commands run gc
--auto after performing operations that could create many loose objects.
Housekeeping is required if there are too many loose objects or too many
packs in the repository.
If the number of loose objects exceeds the value of the gc.auto option
jgit's GC consolidates all existing packs into a single pack (equivalent
to -A option), whereas git-core would combine all loose objects into a
single pack using repack -d -l. Setting the value of gc.auto to 0
disables automatic packing of loose objects.
If the number of packs exceeds the value of gc.autoPackLimit, then
existing packs (except those marked with a .keep file) are consolidated
into a single pack by using the -A option of repack. Setting
gc.autoPackLimit to 0 disables automatic consolidation of packs.
Like git the following jgit commands run auto gc:
- fetch
- merge
- rebase
- receive-pack
The auto gc for receive-pack can be suppressed by setting the config
option receive.autogc = false
Change-Id: I68a2a051b39ec2c53cb7c4b8f6c596ba65eeba5d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Monitoring progress of merges can be useful for users for large
repositories or complex merge processes that take some time.
This enables setting a monitor. Existing merge implementations in jgit
do not yet report progress if a monitor is set. This will be added in a
later change.
Change-Id: I17b978b3fc91750dd88649638b90a46820a0877c
Signed-off-by: Laurent Delaigue <laurent.delaigue@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Monitoring progress of merges can be useful for users for large
repositories or complex merge processes that take some time.
This enables setting a monitor. Existing merge implementations in jgit
do not yet report progress if a monitor is set. This will be added in a
later change.
Change-Id: I17b978b3fc91750dd88649638b90a46820a0877c
Signed-off-by: Laurent Delaigue <laurent.delaigue@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use AutoClosable to close resources in bundle org.eclipse.jgit
- use try-with-resource where possible
- replace use of deprecated release() by close()
Change-Id: I0f139c3535679087b7fa09649166bca514750b81
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Set the commit message to be used for the merge commit (in case one is
created)
Bug: 442886
Change-Id: Ie5ecc13822faa366f00b3daa07f74c8441cae195
Signed-off-by: Axel Richard <axel.richard@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use branch.<x>.mergeoptions and merge.ff as defaults for merging
Read options that control squashing, whether or not to commit the merge
and regarding fast forwarding from the configuration and use them if no
explicit values for these options have been provided to MergeCommand.
Change-Id: Ifdaed4b5e4adc142657c03c8e78b709a99eeddbd
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When there are conflicts with a recursive merge, the conflicting paths
are stored in unmergedPaths (field in ResolveMerger). Later, when the
MergeResult is constructed in MergeCommand, getBaseCommit is called,
which computes the merge base a second time.
In case of RecursiveMerger, getBaseCommit merges the multiple merge
bases into one. It does this not by creating a new ResolveMerger but
instead calling mergeTrees. The problem with mergeTrees is that at the
end, it checks if unmergedPaths is non-empty and returns false in that
case.
Because unmergedPaths was already non-empty because of the real merge,
it thinks that there were conflicts when computing the merge base again,
when there really were none.
This can be fixed by storing the base commit when computing it and then
returning that instead of computing it a second time.
Note that another possible fix would be to just use a new ResolveMerger
for merging the merge bases instead. This would also remove the need to
remember the old value of dircache, inCore and workingTreeIterator (see
RecursiveMerger#getBaseCommit).
Bug: 419641
Change-Id: Ib2ebf4e177498c22a9098aa225e3cfcf16bbd958
Signed-off-by: Robin Stocker <robin@nibor.org>
Make recursive merge strategy the default merge strategy
Use recursive merge as the default strategy since it can successfully
merge more cases than the resolve strategy can. This is also the default
in native Git.
Change-Id: I38fd522edb2791f15d83e99038185edb09fed8e1
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Added also tests and the associated option for the command line Merge
command.
Bug: 335091
Change-Id: Ie321c572284a6f64765a81674089fc408a10d059
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add additional FastForwardMode enums for different config contexts
FastForwardMode is represented by different strings depending on context
it is set or get from. E.g. FastForwardMode.FF_ONLY for
branch.<name>.mergeoptions is "--ff-only" but for merge.ff it is "only".
Change-Id: I39ae93578e4783de80ebf4af29ae23b3936eec47
Add additional FastForwardMode enums for different config contexts
FastForwardMode should be represented by different enums depending on
context it is set or get from. E.g. FastForwardMode.FF_ONLY for
branch.<name>.mergeoptions is "--ff-only" but for merge.ff it is "only".
Change-Id: I3ecc16d48e715b81320b73ffae4caf3558f965f2
A few classes such as Constanrs are marked with @SuppressWarnings, as are
toString() methods with many liternal, but otherwise $NLS-n$ is used for
string containing text that should not be translated. A few literals may
fall into the gray zone, but mostly I've tried to only tag the obvious
ones.
Change-Id: I22e50a77e2bf9e0b842a66bdf674e8fa1692f590
Git API does not declare GitAPIException call() and related cleanups
All commands should throw a GitAPIException so new exceptions can be
added without breaking the builds of old code, i.e. anyone that calls
a Git API should catch GitAPIException and not just the currently known
exceptions.
Now the only checked exceptions on Git API calls are GitException and
subclasses of it. New checked exceptions that are subclasses of
GitException may be added without breaking the API.
Javadoc for GitAPIException is declared on GitCommand and
inherited to subclasses. JGitInternalException is not explicitly
documented anymore.
Unfortunately this change itself breaks the API. The intention is
that it shall be possible to add new checked subclasses of
GitAPIException without breaking the API.
Bug: 366914
EGit-Change-Id: I50380f13fc82c22d0036f47c7859cc3a77e767c5
Change-Id: I50380f13fc82c22d0036f47c7859cc3a77e767c5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Throw API exception when MergeCommand hits checkout conflicts
When MergeCommand hit checkout conflicts it did throw an internal JGit
exception org.eclipse.jgit.errors.CheckoutConflictException instead of
org.eclipse.jgit.api.errors.CheckoutConflictException which it
declares to throw. Hence translate the internal exception to the
exception declared in the API.
Bug: 327573
Change-Id: I1efcd93a43ecbf4a40583e0fc9d8d53cffc98cae
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: Ia0e73208b86c45a3d96698e973f6e70ec5cb7303
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fix the reflog prefix for cherry-pick, revert and merge commands
We should see whether the commit was a regular commit or something
else.
Change-Id: I82d8300cf3c53cb2bdcb6495386aadb803e0c6f7
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Test was added which reproduce the ClassCastException when ours or
theirs merge strategy is set to MergeCommand. Merger and MergeCommand
were updated in order to avoid exception.
Change-Id: I4c1284b4e80d82638d0677a05e5d38182526d196
Signed-off-by: Denys Digtiar <duemir@gmail.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Add "Conflicts" section to merge message on conflict
The same as with cherry-pick, the commit message of a merge should
include a "Conflicts" section when the merge resulted in conflicts.
Change-Id: I6261dc898262322924af5ca1bef841a654b0df55
Signed-off-by: Robin Stocker <robin@nibor.org>
Add paths causing abnormal merge failures (e.g. due to unstaged
changes) to the MergeResult returned by MergeCommand. This helps
callers to better handle (e.g. present) merge results.
Change-Id: Idb8cf04c5cecfb6a12cb880e16febfc3b9358564
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
If HEAD exists but points to an not-existing branch the merge
command should silently create the missing branch and check
it out. This happens if you pull into freshly initalized repo.
HEAD points to refs/heads/master but refs/heads/master doesn't
exist. If you know merge a commit X into HEAD then the branch
master should be created (pointing to X) the working tree should
be updated to reflect X. That is achieved by checkout with one
tree only (HEAD is missing).
A test for this functionality will come the the next proposal
in PullCommandTest.
Change-Id: Id4a0d56d944e0acebd4b3157428bb50bd3fdd872
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The automatically generated commit message of a merge should have the
same structure as in C Git for consistency (as per git fmt-merge-msg).
Before this change:
merging refs/heads/a into refs/heads/master
After:
Merge branch 'a'
Plurals, "into" and joining by "," and "and" also work.
Change-Id: I9658ce2817adc90d2df1060e8ac508d7bd0571cb
There was a wrong javadoc comment telling that MergeCommand
only supports fast-forward merges. This has been fixed.
Change-Id: I7edea779a83528beee34a1753026288c384881ce
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Instead of making the sequence itself responsible for the equivalence
function, use an external function that is supplied by the caller.
This cleans up the code because we now say cmp.equals(a, ai, b, bi)
instead of a.equals(ai, b, bi).
This refactoring also removes the odd concept of creating different
types of sequences to have different behaviors for whitespace
ignoring. Instead DiffComparator now supports singleton functions
that apply a particular equivalence algorithm to a type of sequence.
Change-Id: I559f494d81cdc6f06bfb4208f60780c0ae251df9
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Create a new 'org.eclipse.jgit.api.errors' package to contain
exceptions related to using the Git porcelain API.
Change-Id: Iac1781bd74fbd520dffac9d347616c3334994470
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>