ApplyCommand: handle completely empty context lines in text patches
C git treats completely empty lines as empty context lines (which
traditionally have a single blank). Apparently newer GNU diff may
produce such lines; see [1]. ("Newer" meaning "since 2006"...)
[1] https://github.com/git/git/commit/b507b465f7831
Change-Id: I80c1f030edb17a46289b1dabf11a2648d2660d38
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
ApplyCommand: use byte arrays for text patches, not strings
Instead of converting the patch bytes to strings apply the patch on
byte level, like C git does. Converting the input lines and the hunk
lines from bytes to strings and then applying the patch based on
strings may give surprising results if a patch converts a text file
from one encoding to another. Moreover, in the end we don't know which
encoding to use to write the result.
Previous code just wrote the result as UTF-8, which forcibly changed
the encoding if the original input had some other encoding (even if the
patch had the same non-UTF-8 encoding). It was also wrong if the input
was UTF-8, and the patch should have changed the encoding to something
else.
So use ByteBuffers instead of Strings. This has the additional advantage
that all these ByteBuffers can share the underlying byte arrays of the
input and of the patch, so it also reduces memory consumption.
Change-Id: I450975f2ba0e7d0bec8973e3113cc2e7aea187ee
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Implement applying binary patches. Handles both literal and delta
patches. Note that C git also runs binary files through the clean
and smudge filters. Implement the same safeguards against corrupted
patches as in C git: require the full OIDs to be present in the patch
file, and apply a binary patch only if both pre- and post-image hashes
match.
Add tests for applying literal and delta patches.
Bug: 371725
Change-Id: I71dc214fe4145d7cc8e4769384fb78c7d0d6c220
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
ApplyCommand: convert to git internal format before applying patch
Applying a patch on Windows failed if the patch had the (normal)
single-LF line endings, but the file on disk had the usual Windows
CR-LF line endings.
Git (and JGit) compute diffs on the git-internal blob, i.e., after
CR-LF transformation and clean filtering. Applying patches to files
directly is thus incorrect and may fail if CR-LF settings don't
match, or if clean/smudge filtering is involved.
Change ApplyCommand to run the file content through the check-in
filters before applying the patch, and run the result through the
check-out filters. This makes patch application succeed even if the
patch has single-LFs, but the file has CR-LF and core.autocrlf is
true.
Add tests for various combinations of line endings in the file and in
the patch, and a test to verify the clean/smudge handling.
See also [1].
Running the file though clean/smudge may give strange results with
LFS-managed files. JGit's DiffFormatter has some extra code and
applies the smudge filter again after having run the file through
the check-in filters (CR-LF and clean). So JGit can actually produce
a diff on LFS-managed files using the normal diff machinery. (If it
doesn't run out of memory, that is. After all, LFS is intended for
_large_ files.) How such a diff would be applied with either C git
or JGit is entirely unclear; neither has any code for this special
case. Compare also [2].
Note that C git just doesn't know about LFS and always diffs after
the check-in filter chain, so for LFS files, it'll produce a diff
of the LFS pointers.
[1] https://github.com/git/git/commit/c24f3abac
[2] https://github.com/git-lfs/git-lfs/issues/440
Bug: 571585
Change-Id: I8f71ff26313b5773ff1da612b0938ad2f18751f5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
ApplyCommand: use context lines to determine hunk location
If a hunk does not apply at the position stated in the hunk header
try to determine its position using the old lines (context and
deleted lines).
This is still a far cry from a full git apply: it doesn't do binary
patches, it doesn't handle git's whitespace options, and it's perhaps
not the fastest on big patches. C git hashes the lines and uses these
hashes to speed up matching hunks (and to do its whitespace magic).
Bug: 562348
Change-Id: Id0796bba059d84e648769d5896f497fde0b787dd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Apply hunks when renaming or copying from patch files
When applying a patch that contains renames or copies using ApplyCommand,
also apply all hunks that apply to the renamed or copied file.
Change-Id: I9f3fa4370458bd7c14beeb2e2b49e846d70203cb
Signed-off-by: Jack Wickham <jwickham@palantir.com>
Create parent directories when renaming a file in ApplyCommand
Before this change, applying a patch will fail if the destination directory
doesn't exist; after, the necessary parent directories are created.
If renaming the file fails, the directories won't be deleted, so this change
isn't atomic. However, ApplyCommand is already not atomic - if one hunk fails
to apply, other hunks still get applied - so I don't think that is a blocker.
Change-Id: Iea36138b806d4e7012176615bcc673756a82f365
Signed-off-by: Jack Wickham <jwickham@palantir.com>
Enable and fix warnings about redundant specification of type arguments
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Enable and fix 'Should be tagged with @Override' warning
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Allow setting FileMode to executable when applying patches in ApplyCommand
git-apply allows modifying file modes in patched files using either
"new mode" or "new file mode" headers. This patch adds support for
setting files as executables and vice-versa.
Change-Id: I24848966b46f686f540a8efa8150b42e0d9c3ad1
Signed-off-by: Nadav Cohen <nadavcoh@gmail.com>
Fix ApplyCommand when result of patch is an empty file
Such hunks are identifiable by a zero value for "new start line". Prior
to the fix, JGit throws and ArrayIndexOutOfBoundsException on such
patches.
Change-Id: I4f3deb5e5f41a08af965fcc178d678c77270cddb
Signed-off-by: Jonathan Schneider <jkschneider@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Previously the result of an application would have been \r\r\n in the
case of windows line endings, as RawText does not touch the \r, and
ApplyCommand adds "\r\n" if this is the ending of the first line in the
target file. Only always adding \n should be ok, since \r\n would be the
result if the file and the patch include windows line endings.
Also add according test.
Change-Id: Ibd4c4948d81bd1c511ecf5fd6c906444930d236e
Do not perform character translation on copies in patches
Translation is unnecessary and risks damaging the file. Also
ensure that we close the file if an I/O error occurs.
Change-Id: Ieae6eb941fdeaa61f2611f4cd14dd39117aa12f9
A few classes such as Constanrs are marked with @SuppressWarnings, as are
toString() methods with many liternal, but otherwise $NLS-n$ is used for
string containing text that should not be translated. A few literals may
fall into the gray zone, but mostly I've tried to only tag the obvious
ones.
Change-Id: I22e50a77e2bf9e0b842a66bdf674e8fa1692f590
Make ApplyCommand create missing parent directories for new files
Otherwise applying will fail with a FileNotFoundException, because
File.createNewFile() fails with missing parents.
Contains change & according test.
Change-Id: I970522b549b8bb260ca6720da11f12c57ee8a492
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
- Translate internal exceptions to corresponding API exception
- Do not catch GitAPI exceptions internally to an internal
exception. Just pass them to caller
- Mention thrown exceptions in javadoc
Change-Id: I9044cf86d2b0bcc8b63b7cc016e1bf0055a62053
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: I0a86ce0e393dfde9bb27f0b29e036e76c856396e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
RawText#getEOL() does the same thing as RawText#getLineDelimiter()
The duplication has been introduced when merging
I08e1369e142bb19f42a8d7bbb5a7d062cc8533fc and
I18adc63596f4657516ccc6d704a561924c79d445. The former should have been
manually rebased. It also missed a copyright update in ApplyCommandTest.
Change-Id: I18fe6108220f964524fb16b719604222aa7abee6
Thomas Wolf
Matthias Sohn
Jack Wickham
Anton Khodos
David Pursehouse
Nadav Cohen
Jon Schneider
XinTong Wang
Markus Duft
Robin Rosenberg
Tomasz Zarna