Migrate to Apache MINA sshd 2.6.0 and Orbit I20210203173513
Re-enable DSA, DSA_CERT, and RSA_CERT public key authentication.
DSA is discouraged for a long time already, but it might still be
way too disruptive to completely drop it. RSA is discouraged for
far less long, and dropping that would be really disruptive.
Adapt to the changed property handling. Remove work-arounds for
shortcomings of earlier sshd versions.
Use Orbit I20210203173513, which includes sshd 2.6.0. This also bumps
apache.httpclient to 4.5.13 and apache.httpcore to 4.4.14.
Change-Id: I2d24a1ce4cc9f616a94bb5c4bdaedbf20dc6638e
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.
Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
It seems Eclipse 4.18 reports them as error whereas earlier versions
ignored this maybe since we don't require javadoc comments for all the
test bundles.
Change-Id: I3f4d42ce681ea5c2b4b302991d2641290ac8561d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Revert "Client-side protocol V2 support for fetching"
This reverts commit f802f06e7f.
I had misunderstood how protocol V2 works. This implementation only
works if the negotiation during fetch is done in one round.
Fixing this is substantial work in BasePackFetchConnection. Basically
I think I'd have to change back negotiate to the V0 version, and have
a doFetch() that does
if protocol V2
doFetchV2()
else
doFetchV0()
with doFetchV0 the old code, and doFetchV2 completely new.
Plus there would need to be a HTTP test case requiring several
negotiation rounds.
This is a couple of days work at least, and I don't know when I will
have the time to revisit this. So although the rest of the code is
fine I prefer to back this out completely and not leave a only half
working implementation in the code for an indeterminate time.
Bug: 553083
Change-Id: Icbbbb09882b3b83f9897deac4a06d5f8dc99d84e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.
A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.
In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.
BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)
BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (simplified ACK handling, delimiters, section
headers).
In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.
Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. Do the same for the SSH transport tests.
Bug: 553083
Change-Id: Ice9866aa78020f5ca8f397cde84dc224bf5d41b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This is useful to access git repositories behind a bastion server
(jump host).
Add a constant for the config; rewrite the whole connection initiation
to parse the value and (recursively) set up the chain of hops. Add
tests for a single hop and two different ways to configure a two-hop
chain.
The connection timeout applies to each hop in the chain individually.
Change-Id: Idd25af95aa2ec5367404587e4e530b0663c03665
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
sshd: work around a race condition in Apache MINA sshd 2.4.0/2.5.x
When exceptions occur very early in the SSH connection setup, it's
possible that an exception gets lost. A subsequent authentication
attempt may then never be notified of the failure, and then wait
indefinitely or until its timeout expires.
This is caused by race conditions in sshd. The issue has been reported
upstream as SSHD-1050,[1] but will be fixed at the earliest in sshd
2.6.0.
[1] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-1050
Bug: 565394
Change-Id: If9b62839db38f9e59a5e1137c2257039ba82de98
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Improve the SshTestGitServer API for accessing the server properties.
Instead of returning the raw property map, return the proper sshd API
abstraction PropertyResolver.
This makes the interface more resilient against upstream changes.
Change-Id: Ie5b685bddc4e59f3eb6c121026d3658d57618ca4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
SSHD-1028:[1] server doesn't close server-side sessions properly when
client disconnects.
[1] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-1028
Change-Id: I0d67f49e35abe8375cb1370a494dc01d0fb2c9b1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Motivation: JSch serves as 'default' implementations of the SSH
transport. If a client application does not use it then there is no need
to pull in this dependency.
Move the classes depending on JSch to an OSGi fragment extending the
org.eclipse.jgit bundle and keep them in the same package as before
since moving them to another package would break API. Defer moving them
to a separate package to the next major release.
Add a new feature org.eclipse.jgit.ssh.jsch feature to enable
installation. With that users can now decide which of the ssh client
integrations (JCraft JSch or Apache Mina SSHD) they want to install.
We will remove the JCraft JSch integration in a later step due to the
reasons discussed in bug 520927.
Bug: 553625
Change-Id: I5979c8a9dbbe878a2e8ac0fbfde7230059d74dc2
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Avoid using a key written to a file. This makes it clearer that
the test does not rely on files being present.
Change-Id: I31cf4f404aab5b891c32fc4bda906b7f8fe03777
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
A builder API provides a more convenient way to define a customized
SshdSessionFactory by hiding the subclassing.
Also provide a new interface SshConfigStore to abstract away the
specifics of reading a ssh config file, and provide a way to customize
the concrete ssh config implementation to be used. This facilitates
using an alternate ssh config implementation that may or may not be
based on files.
Change-Id: Ib9038e8ff2a4eb3a9ce7b3554d1450befec8e1e1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change target platforms to Orbit I20200319180910 and regenerate them.
Change package imports to [2.4.0,2.5.0); adapt code to upstream API
changes.
Maven build: update version in root pom.
Bazel build: update version & hash in WORKSPACE file.
Proxy functionality verified manually using 3proxy (HTTP & SOCKS,
with basic authentication) and ssh -vvv -D7020 localhost (SOCKS, no
authentication).
Bug: 561078
Change-Id: I582f6b98055b013c006f2c749890fe6db801cbaa
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
David Ostrovsky
Matthias Sohn
Thomas Wolf