Add new constructors to PackFile to improve a common use case where
callers know the directory, id, and extension, but previously needed to
construct a valid file name (with prefix, '.', etc) to create a
PackFile. Most callers can use the variant that has id as an ObjectId,
but provide an id as String variant too.

Change-Id: I39e4466abe8c9509f5916d5bfe675066570b8585
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>

Pack better represents the purpose of the object and paves the way to
add a PackFile object that extends File.

Change-Id: I39b4f697902d395e9b6df5e8ce53078ce72fcea3
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>

This is the format given by the Eclipse legal doc generator [1].

[1] https://www.eclipse.org/projects/tools/documentation.php?id=technology.jgit

Bug: 548298
Change-Id: I8d8cabc998ba1b083e3f0906a8d558d391ffb6c4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

On recent VMs, collection.toArray(new T[0]) is faster than
collection.toArray(new T[collection.size()]). Since it is also more
readable, it should now be the preferred way of collection to array
conversion.

https://shipilev.net/blog/2016/arrays-wisdom-ancients/

Change-Id: I80388532fb4b2b0663ee1fe8baa94f5df55c8442
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>

Change-Id: Ieb2f66aef2cab7e2a6d8e35c5f5047da881994dd
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

So far, in order to get the pack directory it was necessary to resolve
it from the object directory. This resolution is already done when
creating the object directory, so simplify the call by just adding a
getter to the pack directory.

Change-Id: I69e783141dc6739024e8b3d5acc30843edd651a7
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>

Cached packs are only used when writing over the network or to
a bundle file and reuse validation is always disabled in these
two contexts. The client/consumer of the stream will be SHA-1
checksumming every object.

Reuse validation is most critical during local GC to avoid silently
ignoring corruption by stopping as soon as a problem is found and
leaving everything alone for the end-user to debug and salvage.
Cached packs are not supported during local GC as the bitmap rebuild
logic does not support including a cached pack in the result.

Strip out the validation and force PackWriter to always disable the
cached pack feature if reuseValidation is enabled.

Change-Id: If0d7baf2ae1bf1f7e71bf773151302c9f7887039

This breaks all existing callers once. Applications are not supposed
to build against the internal storage API unless they can accept API
churn and make necessary updates as versions change.

Change-Id: I2ab1327c202ef2003565e1b0770a583970e432e9

The bitmap code in PackWriter knows exactly when to use a pack as
a "cached pack". It enables cached pack usage only when the pack
has a bitmap and its entire closure of objects needs to be sent.
This is a much simpler code path to maintain, and JGit actually
has a way to write the necessary index.

Change-Id: I2645d482f8733fdf0c4120cc59ba9aa4d4ba6881

Update the PackWriter to support writing out pack bitmap indexes,
a parallel ".bitmap" file to the ".pack" file.
Bitmaps are selected at commits every 1 to 5,000 commits for
each unique path from the start. The most recent 100 commits are
all bitmapped. The next 19,000 commits have a bitmaps every 100
commits. The remaining commits have a bitmap every 5,000 commits.
Commits with more than 1 parent are prefered over ones
with 1 or less. Furthermore, previously computed bitmaps are reused,
if the previous entry had the reuse flag set, which is set when the
bitmap was placed at the max allowed distance.

Bitmaps are used to speed up the counting phase when packing, for
requests that are not shallow. The PackWriterBitmapWalker uses
a RevFilter to proactively mark commits with RevFlag.SEEN, when
they appear in a bitmap. The walker produces the full closure
of reachable ObjectIds, given the collection of starting ObjectIds.

For fetch request, two ObjectWalks are executed to compute the
ObjectIds reachable from the haves and from the wants. The
ObjectIds needed to be written are determined by taking all the
resulting wants AND NOT the haves.

For clone requests, we get cached pack support for "free" since
it is possible to determine if all of the ObjectIds in a pack file
are included in the resulting list of ObjectIds to write.

On my machine, the best times for clones and fetches of the linux
kernel repository (with about 2.6M objects and 300K commits) are
tabulated below:

Operation                   Index V2               Index VE003
Clone                       37530ms (524.06 MiB)     82ms (524.06 MiB)
Fetch (1 commit back)          75ms                 107ms
Fetch (10 commits back)       456ms (269.51 KiB)    341ms (265.19 KiB)
Fetch (100 commits back)      449ms (269.91 KiB)    337ms (267.28 KiB)
Fetch (1000 commits back)    2229ms ( 14.75 MiB)    189ms ( 14.42 MiB)
Fetch (10000 commits back)   2177ms ( 16.30 MiB)    254ms ( 15.88 MiB)
Fetch (100000 commits back) 14340ms (185.83 MiB)   1655ms (189.39 MiB)

Change-Id: Icdb0cdd66ff168917fb9ef17b96093990cc6a98d

A few classes such as Constanrs are marked with @SuppressWarnings, as are
toString() methods with many liternal, but otherwise $NLS-n$ is used for
string containing text that should not be translated. A few literals may
fall into the gray zone, but mostly I've tried to only tag the obvious
ones.

Change-Id: I22e50a77e2bf9e0b842a66bdf674e8fa1692f590

During object enumeration for the thin pack, very few objects come
out that are duplicated with the cached pack. Typically these are
only cases where a blob or tree was cherry-picked forward, got a
copy or rename, or was reverted... all relatively infrequent events.

Speed up pruning of the thin pack object list by combining the phase
with the object representation selection. Implementers should already
be offering to reuse the object from the cached pack if it is stored
there, at which point the implementation can perform a very fast type
of containment test using the cached pack's identity rather than yet
another index lookup.  For the local disk case this is probably not a
big improvement, but it does help on the DHT implementation where the
two passes combined into one reduces latency.

Change-Id: I6a07fc75d9075bf6233e967360b6546f9e9a2b33
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

If object reuse validation is enabled, the output pack is going to
probably be stored locally.  When reusing an existing cached pack
to save object enumeration costs, ensure the cached pack has not
been corrupted by checking its SHA-1 trailer.  If it has, writing
will abort and the output pack won't be complete.  This prevents
anyone from trying to use the output pack, and catches corruption
before it can be carried any further.

Change-Id: If89d0d4e429d9f4c86f14de6c0020902705153e6
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

The most expensive part of packing a repository for transport to
another system is enumerating all of the objects in the repository.
Once this gets to the size of the linux-2.6 repository (1.8 million
objects), enumeration can take several CPU minutes and costs a lot
of temporary working set memory.

Teach PackWriter to efficiently reuse an existing "cached pack"
by answering a clone request with a thin pack followed by a larger
cached pack appended to the end.  This requires the repository
owner to first construct the cached pack by hand, and record the
tip commits inside of $GIT_DIR/objects/info/cached-packs:

  cd $GIT_DIR
  root=$(git rev-parse master)
  tmp=objects/.tmp-$$
  names=$(echo $root | git pack-objects --keep-true-parents --revs $tmp)
  for n in $names; do
    chmod a-w $tmp-$n.pack $tmp-$n.idx
    touch objects/pack/pack-$n.keep
    mv $tmp-$n.pack objects/pack/pack-$n.pack
    mv $tmp-$n.idx objects/pack/pack-$n.idx
  done

  (echo "+ $root";
   for n in $names; do echo "P $n"; done;
   echo) >>objects/info/cached-packs

  git repack -a -d

When a clone request needs to include $root, the corresponding
cached pack will be copied as-is, rather than enumerating all of
the objects that are reachable from $root.

For a linux-2.6 kernel repository that should be about 376 MiB,
the above process creates two packs of 368 MiB and 38 MiB[1].
This is a local disk usage increase of ~26 MiB, due to reduced
delta compression between the large cached pack and the smaller
recent activity pack.  The overhead is similar to 1 full copy of
the compressed project sources.

With this cached pack in hand, JGit daemon completes a clone request
in 1m17s less time, but a slightly larger data transfer (+2.39 MiB):

  Before:
    remote: Counting objects: 1861830, done
    remote: Finding sources: 100% (1861830/1861830)
    remote: Getting sizes: 100% (88243/88243)
    remote: Compressing objects: 100% (88184/88184)
    Receiving objects: 100% (1861830/1861830), 376.01 MiB | 19.01 MiB/s, done.
    remote: Total 1861830 (delta 4706), reused 1851053 (delta 1553844)
    Resolving deltas: 100% (1564621/1564621), done.

    real  3m19.005s

  After:
    remote: Counting objects: 1601, done
    remote: Counting objects: 1828460, done
    remote: Finding sources: 100% (50475/50475)
    remote: Getting sizes: 100% (18843/18843)
    remote: Compressing objects: 100% (7585/7585)
    remote: Total 1861830 (delta 2407), reused 1856197 (delta 37510)
    Receiving objects: 100% (1861830/1861830), 378.40 MiB | 31.31 MiB/s, done.
    Resolving deltas: 100% (1559477/1559477), done.

    real 2m2.938s

Repository owners can periodically refresh their cached packs by
repacking their repository, folding all newer objects into a larger
cached pack.  Since repacking is already considered to be a normal
Git maintenance activity, this isn't a very big burden.

[1] In this test $root was set back about two weeks.

Change-Id: Ib87131d5c4b5e8c5cacb0f4fe16ff4ece554734b
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Similar to what we did with the file code, move the pack writer
into its own package so the related classes and their package
private methods are hidden from the rest of the library.

Change-Id: Ic1b5c7c8c8d266e90c910d8d68dfc8e93586854f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Rather than making a loader, and then using that to fill the object
representation, parse the header and set up our data directly.
This saves some time, as we don't waste cycles on information we
won't use right now.

The weight computed for a representation is now its actual stored
size in the pack file, rather than its inflated size.  This accounts
for changes made when the compression level is modified on the
repository.  It is however more costly to determine the weight of
the object, since we have to find its length in the pack.  To try and
recover that cost we now cache the length as part of our ObjectToPack
record, so it doesn't have to be found during the output phase.

A LocalObjectToPack now costs us (assuming 32 bit pointers):

                   (32 bit)     (64 bit)
  vm header:         8 bytes      8 bytes
  ObjectId:         20 bytes     20 bytes
  PackedObjectInfo: 12 bytes     12 bytes
  ObjectToPack:      8 bytes     12 bytes
  LocalOTP:         20 bytes     24 bytes
                 -----------    ---------
                    68 bytes     74 bytes

Change-Id: I923d2736186eb2ac8ab498d3eb137e17930fcb50
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

This move isolates all of the local file specific implementation code
into a single package, where their package-private methods and support
classes are properly hidden away from the rest of the core library.

Because of the sheer number of files impacted, I have limited this
change to only the renames and the updated imports.

Change-Id: Icca4884e1a418f83f8b617d0c4c78b73d8a4bd17
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

The new selection implementation uses a public API on the
ObjectReader, allowing the storage library to enumerate its
candidates and select the best one for this packer without
needing to build a temporary list of the candidates first.

Change-Id: Ie01496434f7d3581d6d3bbb9e33c8f9fa649b6cd
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Replace the old crude event listener system with a much more generic
implementation, patterned after the event dispatch techniques used
in Google Web Toolkit 1.5 and later.

Each event delivers to an interface that defines a single method,
and the event itself is what performs the delivery in a type-safe
way through its own dispatch method.

Listeners are registered in a generic listener list, indexed by
the interface they implement and wish to receive an event for.
Delivery of events is performed by looping through all listeners
implementing the event's corresponding listener interface, and using
the event's own dispatch method to deliver the event.  This is the
classical "double dispatch" pattern for event delivery.

Listeners can be unregistered by invoking remove() on their
registration handle.  This change therefore requires application
code to track the handle if it wishes to remove the listener at a
later point in time.

Event delivery is now exposed as a generic public method on the
Repository class, making it easier for any type of message to
be sent out to any type of listener that has registered, without
needing to pre-arrange for type-safe fireFoo() methods.

New event types can be added in the future simply by defining a
new RepositoryEvent subclass and a corresponding RepositoryListener
interface that it dispatches to.  By always adding new events through
a new interface, we never need to worry about defining an Adapter
to provide default no-op implementations of new event methods.

Change-Id: I651417b3098b9afc93d91085e9f0b2265df8fc81
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Per CQ 3448 this is the initial contribution of the JGit project
to eclipse.org.  It is derived from the historical JGit repository
at commit 3a2dd9921c.

Signed-off-by: Shawn O. Pearce <spearce@spearce.org>