Preserve merges during pull if configured to do so
Setting branch.<name>.rebase or pull.rebase to 'preserve' will preserve
merges during rebase. Also, pull.rebase is now consulted if there is no
branch-specific configuration.
Bug: 429664
Change-Id: I345fa295c7e774e0d0a8e6aba30fbfc3552e0084
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Use fetch.prune and remote.<name>.prune to set prune mode when fetching
When no explicit value is set via FetchCommand.setRemoveDeletedRefs()
checks if pruning is enabled in the configuration.
The following commit introduced the prune config to C Git:
737c5a9cde
Change-Id: Ida79d335218e1c9f5c6e2ce03386ac8a1c0b212e
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The change includes comparing symbolic links between disk and index,
adding symbolic links to the index, creating/modifying links on
checkout. The behavior is controlled by the core.symlinks setting, just
as C Git does. When a new repository is created core.symlinks will be
set depending on the capabilities of the operating system and Java
runtime.
If core.symlinks is set to true, the assumption is that symlinks are
supported, which may result in runtime errors if this turns out not to
be the case.
Measuring the cost of jgit status on a repository with ~70000 files,
of which ~30000 are tracked reveals a penalty of about 10% for using
the Java7 (really NIO2) support module.
Bug: 354367
Change-Id: I12f0fdd9d26212324a586896ef7eb1f6ff89c39c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This feature was introduced in native git with version 1.8.4.
Bug: 422951
Change-Id: I42f194174d64d7ada6631e2156c2a7bf93b5e91c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This implementation has been proven to deadlock in production server
loads. Google has been running with it disabled for a quite a while,
as the bugs have been difficult to identify and fix.
Instead of suggesting it works and is useful, drop the code. JGit
should not advertise support for functionality that is known to
be broken.
In a few of the places where read-ahead was enabled by DfsReader
there is more information about what blocks should be loaded when.
During object representation selection, or size lookup, or sending
object as-is to a PackWriter, or sending an entire pack as-is the
reader knows exactly which blocks are required in the cache, and it
also can compute when those will be needed. The broken read-ahead
code was stupid and just read a fixed amount ahead of the current
offset, which can waste IOs if more precise data was available.
DFS systems are usually slow to respond so read-ahead is still
a desired feature, but it needs to be rebuilt from scratch and
make better use of the offset information.
Change-Id: Ibaed8288ec3340cf93eb269dc0f1f23ab5ab1aea
There is a huge performance issue when using both JGit (EGit) and Git
because JGit does not fill all dircache stat fields with the values Git
would expect. As a result thereof Git would typically revalidate a large
number of tracked files. This can take several minutes for large
repositories with many large files.
Since 1.8.2 Git will restrict stat checking to the size and whole second
part of the modification time stamp, if core.statinfo is set to
"minimal".
As JGit checks only size and modification time this is close to what
JGit already does. To make the match perfect ignore the sub-second part
of the modification time stamp if core.statinfo = minimal.
Change-Id: I8eaff1858a891571075a86db043f9d80da3d7503
Add additional FastForwardMode enums for different config contexts
FastForwardMode is represented by different strings depending on context
it is set or get from. E.g. FastForwardMode.FF_ONLY for
branch.<name>.mergeoptions is "--ff-only" but for merge.ff it is "only".
Change-Id: I39ae93578e4783de80ebf4af29ae23b3936eec47
Add additional FastForwardMode enums for different config contexts
FastForwardMode should be represented by different enums depending on
context it is set or get from. E.g. FastForwardMode.FF_ONLY for
branch.<name>.mergeoptions is "--ff-only" but for merge.ff it is "only".
Change-Id: I3ecc16d48e715b81320b73ffae4caf3558f965f2
A few classes such as Constanrs are marked with @SuppressWarnings, as are
toString() methods with many liternal, but otherwise $NLS-n$ is used for
string containing text that should not be translated. A few literals may
fall into the gray zone, but mostly I've tried to only tag the obvious
ones.
Change-Id: I22e50a77e2bf9e0b842a66bdf674e8fa1692f590
Make GC honor the config parameter gc.pruneexpire. If the parameter is
not set then the default is "2.weeks.ago"
Change-Id: I0ae0ca85993cafb4bc75ba80504da18544894ec3
Set core.precomposeunicode to true when creating repository on Mac
Java has no option but to use precomposed Unicode, so we should
state that when creating a new repository. Not that Java will use
precomposed unicode regardless of this setting, but this reduces
the risk of incompatibility with C Git.
Change-Id: I3779b75f76d2e2061c836cbc9b4b7c2ae0cf18f4
Adds the following commands:
- Add
- Init
- Status
- Sync
- Update
This also updates AddCommand so that file patterns added that
are submodules can be staged in the index.
Change-Id: Ie5112aa26430e5a2a3acd65a7b0e1d76067dc545
Signed-off-by: Kevin Sawicki <kevin@github.com>
Signed-off-by: Chris Aniszczyk <zx@twitter.com>
In practice the DHT storage layer has not been performing as well as
large scale server environments want to see from a Git server.
The performance of the DHT schema degrades rapidly as small changes
are pushed into the repository due to the chunk size being less than
1/3 of the pushed pack size. Small chunks cause poor prefetch
performance during reading, and require significantly longer prefetch
lists inside of the chunk meta field to work around the small size.
The DHT code is very complex (>17,000 lines of code) and is very
sensitive to the underlying database round-trip time, as well as the
way objects were written into the pack stream that was chunked and
stored on the database. A poor pack layout (from any version of C Git
prior to Junio reworking it) can cause the DHT code to be unable to
enumerate the objects of the linux-2.6 repository in a completable
time scale.
Performing a clone from a DHT stored repository of 2 million objects
takes 2 million row lookups in the DHT to locate the OBJECT_INDEX row
for each object being cloned. This is very difficult for some DHTs to
scale, even at 5000 rows/second the lookup stage alone takes 6 minutes
(on local filesystem, this is almost too fast to bother measuring).
Some servers like Apache Cassandra just fall over and cannot complete
the 2 million lookups in rapid fire.
On a ~400 MiB repository, the DHT schema has an extra 25 MiB of
redundant data that gets downloaded to the JGit process, and that is
before you consider the cost of the OBJECT_INDEX table also being
fully loaded, which is at least 223 MiB of data for the linux kernel
repository. In the DHT schema answering a `git clone` of the ~400 MiB
linux kernel needs to load 248 MiB of "index" data from the DHT, in
addition to the ~400 MiB of pack data that gets sent to the client.
This is 193 MiB more data to be accessed than the native filesystem
format, but it needs to come over a much smaller pipe (local Ethernet
typically) than the local SATA disk drive.
I also never got around to writing the "repack" support for the DHT
schema, as it turns out to be fairly complex to safely repack data in
the repository while also trying to minimize the amount of changes
made to the database, due to very common limitations on database
mutation rates..
This new DFS storage layer fixes a lot of those issues by taking the
simple approach for storing relatively standard Git pack and index
files on an abstract filesystem. Packs are accessed by an in-process
buffer cache, similar to the WindowCache used by the local filesystem
storage layer. Unlike the local file IO, there are some assumptions
that the storage system has relatively high latency and no concept of
"file handles". Instead it looks at the file more like HTTP byte range
requests, where a read channel is a simply a thunk to trigger a read
request over the network.
The DFS code in this change is still abstract, it does not store on
any particular filesystem, but is fairly well suited to the Amazon S3
or Apache Hadoop HDFS. Storing packs directly on HDFS rather than
HBase removes a layer of abstraction, as most HBase row reads turn
into an HDFS read.
Most of the DFS code in this change was blatently copied from the
local filesystem code. Most parts should be refactored to be shared
between the two storage systems, but right now I am hesistent to do
this due to how well tuned the local filesystem code currently is.
Change-Id: Iec524abdf172e9ec5485d6c88ca6512cd8a6eafb
This constant determine the default start-point, if the user
don't want to create a branch from the current HEAD.
Change-Id: Iea944e11e80134fbafc4c47383457d5ed11a4164
Signed-off-by: Manuel Doninger <manuel.doninger@googlemail.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Change-Id: I22fc46dff6cc5dfd975f6e82161d265781778cde
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Respect core.excludesfile to enable global ignore rules
Also use FS.resolve() to properly resolve files from path strings.
Bug: 328428 (partial fix)
Change-Id: I41d94694f220dcb85605c9acadfffb1fa23beaeb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
ConfigConstants: expose some constants for user name and email.
This is needed by a EGit change
http://egit.eclipse.org/r/#change,2232
Change-Id: I3d62f904b769fc2f1b7b8f0f24f7dd757fc9c379
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
The diff algorithm which is used by Merge, Cherry-Pick, Rebase
should be configurable. A new configuration parameter "diff.algorithm"
is introduced which currently accepts the values "myers" or
"histogram". Based on this parameter for example the ResolveMerger
will choose a diff algorithm. The reason for this is bug 331078.
This bug shows that JGit is more compatible with C Git when
histogram diff is in place. But since histogram diff is quite new we
need an easy way to fall back to Myers diff.
Bug: 331078
Change-Id: I2549c992e478d991c61c9508ad826d1a9e539ae3
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Philipp Thun <philipp.thun@sap.com>
The need for branching becomes more pressing with pull
support: we need to make sure the upstream configuration entries
are written correctly when creating and renaming branches
(and of course are cleaned up when deleting them).
This adds support for listing, adding, deleting and renaming
branches including the more common options.
Bug: 326938
Change-Id: I00bcc19476e835d6fd78fd188acde64946c1505c
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
This is the minimal implementation of a "Pull" command. It does not
have any parameters besides the generic progress monitor and timeout.
It works on the currently checked-out branch and assumes that the
configuration contains the keys "branch.<branch name>.remote" and
"branch.<branch name>.merge" to determine the remote configuration
for the fetch and the remote branch name for the merge.
Bug: 303404
Change-Id: I7fe09029996d0cfc09a7d8f097b5d6af1488fa93
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
"Bare" Repository should not return working directory.
If a repository is "bare", it currently still returns a working directory.
This conflicts with the specification of "bare"-ness.
Bug: 311902
Change-Id: Ib54b31ddc80b9032e6e7bf013948bb83e12cfd88
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Per CQ 3448 this is the initial contribution of the JGit project
to eclipse.org. It is derived from the historical JGit repository
at commit 3a2dd9921c.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Konrad Kügler
Robin Rosenberg
Stefan Lay
Shawn Pearce
Tomasz Zarna
Tomasz Zarna
Christian Halstrick
Kevin Sawicki
Manuel Doninger
Matthias Sohn
Mathias Kinzler
Chris Aniszczyk
Git Development Community