Cache user global and system-wide git configurations
So far the git configuration and the system wide git configuration were
always reloaded when jgit accessed these global configuration files to
access global configuration options which are not in the context of a
single git repository. Cache these configurations in SystemReader and
only reload them if their file metadata observed using FileSnapshot
indicates a modification.
Change-Id: I092fe11a5d95f1c5799273cacfc7a415d0b7786c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Improve retry handling when saving FileStoreAttributes fails
- fix handling of interrupts in FileStoreAttributes#saveToConfig
- increase retry wait time to 100ms
- don't wait after last retry
- dont retry if failure is caused by another exception than
LockFailedException
Change-Id: I108c012717d2bcce71f2c6cb9cf0879de704ebc2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.
Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.
Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>
Use Instant instead of milliseconds for filesystem timestamp handling
This enables higher file timestamp resolution on filesystems like ext4,
Mac APFS (1ns) or NTFS (100ns) providing high timestamp resolution on
filesystem level.
Note:
- on some OSes Java 8,9 truncate milliseconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes truncates timestamp resolution to microseconds when
converting the internal representation to FileTime exposed in the API,
see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution
Change-Id: I25ffff31a3c6f725fc345d4ddc2f26da3b88f6f2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Persist filesystem timestamp resolution and allow manual configuration
To enable persisting filesystem timestamp resolution per FileStore add a
new config section to the user global git configuration:
- Config section is "filesystem"
- Config subsection is concatenation of
- Java vendor (system property "java.vm.vendor")
- runtime version (system property "java.vm.version")
- FileStore's name
- separated by '|'
e.g.
"AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"
The prefix is needed since some Java versions do not expose the full
timestamp resolution of the underlying filesystem. This may also
depend on the underlying operating system hence concrete key values
may not be portable.
- Config key for timestamp resolution is "timestampResolution" as a time
value, supported time units are those supported by
DefaultTypedConfigGetter#getTimeUnit
If timestamp resolution is already configured for a given FileStore
the configured value is used instead of measuring the resolution.
When timestamp resolution was measured it is persisted in the user
global git configuration.
Example:
[filesystem "AdoptOpenJDK|1.8.0_212-b03|/dev/disk1s1"]
timestampResolution = 1 seconds
If locking the git config file fails retry saving the resolution up to 5
times in order to workaround races with another thread.
In order to avoid stack overflow use the fallback filesystem timestamp
resolution when loading FileBasedConfig which creates itself a
FileSnapshot to help checking if the config changed.
Note:
- on some OSes Java 8,9 truncate to milliseconds or seconds, see
https://bugs.openjdk.java.net/browse/JDK-8177809, fixed in Java 10
- UnixFileAttributes up to Java 12 truncates timestamp resolution to
microseconds when converting the internal representation to FileTime
exposed in the API, see https://bugs.openjdk.java.net/browse/JDK-8181493
- WindowsFileAttributes also provides only microsecond resolution up to
Java 12
Hence do not attempt to manually configure a higher timestamp resolution
than supported by the Java version being used at runtime.
Bug: 546891
Bug: 548188
Change-Id: Iff91b8f9e6e5e2295e1463f87c8e95edf4abbcf8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Timeout measuring file timestamp resolution after 2 seconds
It was reported that measuring file timestamp resolution may hang
indefinitely on nfs. Hence timeout this measurement at the known worst
filesystem timestamp resolution (FAT) of 2 seconds.
Bug: 548188
Change-Id: I17004b0aa49d5b0e76360a008af3adb911b289c0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
RevWalk: Add a setFirstParent that mimics C git's --first-parent
RevWalk does not currently provide a --first-parent equivalent and the
feature has been requested.
Add a field to the RevWalk class to specify whether walks should
traverse first parents only. Modify Generator implementations to support
the feature.
Change-Id: I4a9a0d5767f82141dcf6d08659d7cb77c585fae4
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Retry loading config when locked by another process
When loading the config, a FileNotFoundException may occur if the file
exists but cannot be read (see [1]). This is the case on Windows with a
virus scanner checking the file. Therefore if the file exists and that
exception is thrown, retry multiple times, similar to how this was
already implemented for IOException.
[1] https://docs.oracle.com/javase/8/docs/api/java/io/FileNotFoundException.html
Bug: 529522
Change-Id: Ic5dc3b7b24bb0005d6256ed00513bc7c0b91e613
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We logged a stack trace if the configured http.cookieFile was missing.
Instead only log a warning.
Bug: 548081
Change-Id: I42e39f5ad8ffce7b43162e5068f60af073b8a126
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The git config entries "http.cookieFile" and
"http.saveCookies" are correctly evaluated.
Bug: 488572
Change-Id: Icfeeea95e1a5bac3fa4438849d4ac2306d7d5562
Signed-off-by: Konrad Windszus <konrad_w@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
RevWalkUtils: add progress callback to findBranchesReachableFrom
Offer a version of findBranchesReachableFrom method with progress
monitor callback. This is required to allow UI clients to cancel long
running operations and show progress.
Bug: 547642
Change-Id: I31d1de54dbaa6ffb11e03da4c447963e8defa1d0
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Externalize the message and log the pack file with absolute path.
Change-Id: I019052dfae8fd96ab67da08b3287d699287004cb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
(cherry picked from commit 9665d86ba1)
Externalize the message and log the pack file with absolute path.
Change-Id: I019052dfae8fd96ab67da08b3287d699287004cb
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Instead of a new "unexpectedNlinkValue" message use the already
existing "failedAtomicFileCreation". Remove a stray double quote
from the latter.
Change-Id: I1ba5e9ea48d3f7615354b2ace2575883070b3206
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
RenameBranchCommand: more consistent handling of short ref names
Several problems:
* The command didn't specify whether it expected short or full names.
* For the new name, it expected a short name, but then got confused
if tags or both local and remote branches with the same name existed.
* For the old name, it accepted either a short or a full name, but
again got confused if a short name was given and a tag with the
same name existed.
With such an interface, one cannot use Repository.findRef() to
reliably find the branch to rename. Use exactRef() for the new
name as by the time the Ref is needed its full name is known.
For determining the old Ref from the name, do the resolution
explicitly: first try exactRef (assuming the old name is a full
name); if that doesn't find anything, try "refs/heads/<old>" and
"refs/remotes/<old>" explicitly. Throw an exception if the name
is ambiguous, or if exactRef returned something that is not a
branch (refs/tags/... or also refs/notes/...).
Document in the javadoc what kind of names are valid, and add tests.
A user can still shoot himself in the foot if he chooses exceptionally
stupid branch names. For instance, it is still possible to rename a
branch to "refs/heads/foo" (full name "refs/heads/refs/heads/foo"),
but it cannot be renamed further using the new short name if a branch
with the full name "refs/heads/foo" exists. Similar edge cases exist
for other dumb branch names, like a branch with the short name
"refs/tags/foo". Renaming using the full name is always possible.
Bug: 542446
Change-Id: I34ac91c80c0a00c79a384d16ce1e727c550d54e9
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
This also includes a change to generating the jgit CLI jar. Shading is
no longer possible because it breaks the signature of BouncyCastle.
Instead, the Spring Boot Loader Maven plug-in is now used to generate an
executable jar.
Bug: 382212
Change-Id: I35ee3d4b06d9d479475ab2e51b29bed49661bbdc
Also-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
Signed-off-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
Signed-off-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This change introduces the concept of a GpgSigner which will sign
commits. The GpgSigner will be of a specific implementation (eg.,
Bouncycastle or OpenPgP executable). The actual implementation is not
part of this change.
Bug: 382212
Change-Id: Iea5da1e885c039e06bc8d679d46b124cbe504c8e
Also-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Medha Bhargav Prabhala <mprabhala@salesforce.com>
Signed-off-by: Gunnar Wagenknecht <gunnar@wagenknecht.org>
BasePackConnection: Check for expected length of ref advertisement
When a server sends a ref advertisement using protocol v2 it contains
lines other than ref names and sha1s. Attempting to get the sha1 out
of such a line using the substring method can result in a SIOOB error
when it doesn't actually contain the sha1 and ref name.
Add a check that the line is of the expected length, and subsequently
that the extracted object id is valid, and if not throw an exception.
Change-Id: Id92fe66ff8b6deb2cf987d81929f8d0602c399f4
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Remove unused text "symlinkCannotBeWrittenAsTheLinkTarget"
The only reference to this externalized text was deleted in c88d34b0.
Change-Id: Iecc7cc89192d69431dddb6550a02f66f0b09accc
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Throw error when deepen-since excludes all commits
In C Git, when a client fetches with "git fetch --shallow-since=<date>
origin <ref>", and all commits reachable from <ref> are older than
<date>, the server dies with a message "no commits selected for shallow
requests". That is, (1) the --shallow-since filter applies to the commit
pointed to by the ref itself, and (2) there is a check that at least one
commit is not filtered out. (The pack-protocol.txt documentation does
not describe this, but the C implementation does this.)
The implementation in commit 1bb430dc21 ("UploadPack: support
deepen-since in protocol v2", 2018-09-27) does neither (1) nor (2), so
do both of these.
Change-Id: I9946327a71627626ecce34ca2d017d2add8867fc
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
First-want line parsing accepts lines with an optional whitespace, when
the spec is strict requiring a white space.
Validate the line enforcing that there is a white space between oid and
capabilities list.
Change-Id: I45ada67030e0720f9b402c298be18c7518c799b1
Signed-off-by: Ivan Frade <ifrade@google.com>
DfsFsck: Check that .gitmodules in the repository have valid contents
Previous commits block the addition to the repo of dangerous .gitmodules
files, but some could have been committed before those safeguards where
in place.
Add a check in DfsFsck to validate the .gitmodules files in the repo.
Use the same validation than the ReceivePack, translating the
results to FsckErrors.
Note that *all* .gitmodules files in the storage will be checked, not
only the latest version.
Change-Id: I040cf1f31a779419aad0292ba5e6e76eb7f32b66
Signed-off-by: Ivan Frade <ifrade@google.com>
The main concern are submodule urls starting with '-' that could pass as
options to an unguarded tool.
Pass through the parser the ids of blobs identified as .gitmodules
files in the ObjectChecker. Load the blobs and parse/validate them
in SubmoduleValidator.
Change-Id: Ia0cc32ce020d288f995bf7bc68041fda36be1963
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
SubmoduleAddCommand: Reject submodule URIs that look like cli options
In C git versions before 2.19.1, the submodule is fetched by running
"git clone <uri> <path>". A URI starting with "-" would be interpreted
as an option, causing security problems. See CVE-2018-17456.
Refuse to add submodules with URIs, names or paths starting with "-",
that could be confused with command line arguments.
[jn: backported to JGit 4.7.y, bringing portions of Masaya Suzuki's
dotdot check code in v5.1.0.201808281540-m3~57 (Add API to specify
the submodule name, 2018-07-12) along for the ride]
Change-Id: I2607c3acc480b75ab2b13386fe2cac435839f017
Signed-off-by: Ivan Frade <ifrade@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Externalize warning message in RefDirectory.delete()
Change-Id: Icec16c01853a3f5ea016d454b3d48624498efcce
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 5e68fe245f)
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
FS_POSIX.createNewFile(File) failed to properly implement atomic file
creation on NFS using the algorithm [1]:
- name of the hard link must be unique to prevent that two processes
using different NFS clients try to create the same link. This would
render nlink useless to detect if there was a race.
- the hard link must be retained for the lifetime of the file since we
don't know when the state of the involved NFS clients will be
synchronized. This depends on NFS configuration options.
To fix these issues we need to change the signature of createNewFile
which would break API. Hence deprecate the old method
FS.createNewFile(File) and add a new method createNewFileAtomic(File).
The new method returns a LockToken which needs to be retained by the
caller (LockFile) until all involved NFS clients synchronized their
state. Since we don't know when the NFS caches are synchronized we need
to retain the token until the corresponding file is no longer needed.
The LockToken must be closed after the LockFile using it has been
committed or unlocked. On Posix, if core.supportsAtomicCreateNewFile =
false this will delete the hard link which guarded the atomic creation
of the file. When acquiring the lock fails ensure that the hard link is
removed.
[1] https://www.time-travellers.org/shane/papers/NFS_considered_harmful.html
also see file creation flag O_EXCL in
http://man7.org/linux/man-pages/man2/open.2.html
Change-Id: I84fcb16143a5f877e9b08c6ee0ff8fa4ea68a90d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Abort rename detection in a timely manner if cancelled
If progress monitor is cancelled break loops in rename detection by
throwing a CanceledException.
Bug: 536324
Change-Id: Ia3511fb749d2a5d45005e72c156b874ab7a0da26
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Remove completely the empty directories under refs/<namespace>
including the first level partition of the changes, when they are
completely empty.
Bug: 536777
Change-Id: I88304d34cc42435919c2d1480258684d993dfdca
Signed-off-by: Luca Milanesio <luca.milanesio@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Currently SubmoduleAddCommand always uses the path as submodule name.
This patch lets the caller specify a submodule name.
SubmoduleUpdateCommand still does not make use of the submodule name
(see bug 535027) but Git does. To avoid triggering CVE-2018-11235,
do some validation on the name to avoid '..' path components.
[jn: fleshed out commit message, mostly to work around flaky CI]
Change-Id: I6879c043c6d7973556e2080387f23c246e3d76a5
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
Try to give as much information as possible. The connection's
response message might contain additional hints as to why the
connection could not be established.
Bug: 536541
Change-Id: I7230e4e0be9417be8cedeb8aaab35186fcbf00a5
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Propagate failure of ssh command to caller of SshSupport
When SshSupport.runSshCommand fails since the executed external ssh
command failed throw a CommandFailedException.
If discovery of LFS server fails due to failure of the
git-lfs-authenticate command chain the CommandFailureException to the
LfsConfigInvalidException in order to allow root cause analysis in the
application using that.
Change-Id: I2f9ea2be11274549f6d845937164c248b3d840b2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add support for the "shallow" and "deepen" parameters in the "fetch"
command in the fetch-pack/upload-pack protocol v2. Advertise support for
this in the capability advertisement.
TODO: implement deepen-relative, deepen-since, deepen-not
Change-Id: I7ffd80d6c38872f9d713ac7d6e0412106b3766d7
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
On a local non-NFS filesystem the .git/config file will be orphaned if
it is replaced by a new process while the current process is reading the
old file. The current process successfully continues to read the
orphaned file until it closes the file handle.
Since NFS servers do not keep track of open files, instead of orphaning
the old .git/config file, such a replacement on an NFS filesystem will
instead cause the old file to be garbage collected (deleted). A stale
file handle exception will be raised on NFS clients if the file is
garbage collected (deleted) on the server while it is being read. Since
we no longer have access to the old file in these cases, the previous
code would just fail. However, in these cases, reopening the file and
rereading it will succeed (since it will open the new replacement file).
Since retrying the read is a viable strategy to deal with stale file
handles on the .git/config file, implement such a strategy.
Since it is possible that the .git/config file could be replaced again
while rereading it, loop on stale file handle exceptions, up to 5 extra
times, trying to read the .git/config file again, until we either read
the new file, or find that the file no longer exists. The limit of 5 is
arbitrary, and provides a safe upper bounds to prevent infinite loops
consuming resources in a potential unforeseen persistent error
condition.
Change-Id: I6901157b9dfdbd3013360ebe3eb40af147a8c626
Signed-off-by: Nasser Grainawi <nasser@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Teach UploadPack to support filtering by blob size
Teach UploadPack to advertise the filter capability and support a
"filter" line in the request, accepting blob sizes only, if the
configuration variable "uploadpack.allowfilter" is true. This feature is
currently in the "master" branch of Git, and as of the time of writing,
this feature is to be released in Git 2.17.
This is incomplete in that the filter-by-sparse-specification feature
also supported by Git is not included in this patch.
If a JGit server were to be patched with this commit, and a repository
on that server configured with RequestPolicy.ANY or
RequestPolicy.REACHABLE_COMMIT_TIP, a Git client built from the "master"
branch would be able to perform a partial clone.
Change-Id: If72b4b422c06ab432137e9e5272d353b14b73259
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
LFS: support merge/rebase/cherry-pick/diff/compare with LFS files
Respect merge=lfs and diff=lfs attributes where required to replace (in
memory) the content of LFS pointers with the actual blob content from
the LFS storage (and vice versa when staging/merging).
Does not implement general support for merge/diff attributes for any
other use case apart from LFS.
Change-Id: Ibad8875de1e0bee8fe3a1dffb1add93111534cae
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If JGit built in LFS support is enabled for the current repository (or
user/system), any existing pre-push hook will cause an exception for the
time beeing, as only a single pre-push hook is supported.
Thus either native pre-push hooks OR JGit built-in LFS support may be
enabled currently, but not both.
Change-Id: Ie7d2b90e26e948d9cca3d05a7a19489488c75895
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* Section and key names in git config files are case-insensitive.
* If an include directive is invalid, include the line in the
exception message.
* If inclusion of the included file fails, put the file name into
the exception message so that the user knows in which file the
problem is.
Change-Id: If920943af7ff93f5321b3d315dfec5222091256c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The reason for the change is LFS: when using a lot of LFS files,
checkout can take quite some time on larger repositories. To avoid
"hanging" UI, provide progress reporting.
Also implement (partial) progress reporting for cherry-pick, reset,
revert which are using checkout internally.
The feature is also useful without LFS, so it is independent of it.
Change-Id: I021e764241f3c107eaf2771f6b5785245b146b42
Signed-off-by: Markus Duft <markus.duft@ssi-schaefer.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: Iaaefc2cbafbf083d6ab158b1c378ec69cc76d282
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Use submodule name instead of path as key in config
When a submodule is moved, the "name" field remains the same, while
the "path" field changes. Git uses the "name" field in .git/config
when a submodule is initialized, so this patch makes JGit do so too.
Change-Id: I48d8e89f706447b860c0162822a8e68170aae42b
Signed-off-by: David Turner <dturner@twosigma.com>
Config: Rewrite subsection and value escaping and parsing
Previously, Config was using the same method for both escaping and
parsing subsection names and config values. The goal was presumably code
savings, but unfortunately, these two pieces of the git config format
are simply different.
In git v2.15.1, Documentation/config.txt says the following about
subsection names:
"Subsection names are case sensitive and can contain any characters
except newline (doublequote `"` and backslash can be included by
escaping them as `\"` and `\\`, respectively). Section headers cannot
span multiple lines. Variables may belong directly to a section or to
a given subsection."
And, later in the same documentation section, about values:
"A line that defines a value can be continued to the next line by
ending it with a `\`; the backquote and the end-of-line are stripped.
Leading whitespaces after 'name =', the remainder of the line after
the first comment character '#' or ';', and trailing whitespaces of
the line are discarded unless they are enclosed in double quotes.
Internal whitespaces within the value are retained verbatim.
Inside double quotes, double quote `"` and backslash `\` characters
must be escaped: use `\"` for `"` and `\\` for `\`.
The following escape sequences (beside `\"` and `\\`) are recognized:
`\n` for newline character (NL), `\t` for horizontal tabulation (HT,
TAB) and `\b` for backspace (BS). Other char escape sequences
(including octal escape sequences) are invalid."
The main important differences are that subsection names have a limited
set of supported escape sequences, and do not support newlines at all,
either escaped or unescaped. Arguably, it would be easy to support
escaped newlines, but C git simply does not:
$ git config -f foo.config $'foo.bar\nbaz.quux' value
error: invalid key (newline): foo.bar
baz.quux
I468106ac was an attempt to fix one bug in escapeValue, around leading
whitespace, without having to rewrite the whole escaping/parsing code.
Unfortunately, because escapeValue was used for escaping subsection
names as well, this made it possible to write invalid config files, any
time Config#toText is called with a subsection name with trailing
whitespace, like {foo }.
Rather than pile hacks on top of hacks, fix it for real by largely
rewriting the escaping and parsing code.
In addition to fixing escape sequences, fix (and write tests for) a few
more issues in the old implementation:
* Now that we can properly parse it, always emit newlines as "\n" from
escapeValue, rather than the weird (but still supported) syntax with a
non-quoted trailing literal "\n\" before the newline. In addition to
producing more readable output and matching the behavior of C git,
this makes the escaping code much simpler.
* Disallow '\0' entirely within both subsection names and values, since
due to Unix command line argument conventions it is impossible to pass
such values to "git config".
* Properly preserve intra-value whitespace when parsing, rather than
collapsing it all to a single space.
Change-Id: I304f626b9d0ad1592c4e4e449a11b136c0f8b3e3
Matthias Sohn
Dave Borowitz
Michael Keppler
Konrad Windszus
Andrey Loskutov
Thomas Wolf
David Pursehouse
Medha Bhargav Prabhala
Gunnar Wagenknecht
Jonathan Tan
Ivan Frade
Luca Milanesio
Masaya Suzuki
Nasser Grainawi
Markus Duft
David Turner