The search for reuse phase for *all* the objects scans *all*
the packfiles, looking for the best candidate to serve back to the
client.

This can lead to an expensive operation when the number of
packfiles and objects is high.

Add parameter "pack.searchForReuseTimeout" to limit the time spent
on this search.

Change-Id: I54f5cddb6796fdc93ad9585c2ab4b44854fa6c48

Implement applying binary patches. Handles both literal and delta
patches. Note that C git also runs binary files through the clean
and smudge filters. Implement the same safeguards against corrupted
patches as in C git: require the full OIDs to be present in the patch
file, and apply a binary patch only if both pre- and post-image hashes
match.

Add tests for applying literal and delta patches.

Bug: 371725
Change-Id: I71dc214fe4145d7cc8e4769384fb78c7d0d6c220
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Add a new BinaryDeltaInputStream that applies a delta provided by
another InputStream to a given base. Because delta application needs
random access to the base, the base itself cannot be yet another
InputStream. But at least this enables streaming of the result.

Add a simple test using delta hunks generated by C git.

Bug: 371725
Change-Id: Ibd26fa2f49860737ad5c5387f7f4870d3e85e628
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Add streams that can encode or decode git binary patch data on the fly.
Git writes binary patches base-85 encoded, at most 52 un-encoded bytes,
with the unencoded data length prefixed in a one-character encoding, and
suffixed with a newline character.

Add a test for both the new input and the output stream. The test
roundtrips binary data of different lengths in different ways.

Bug: 371725
Change-Id: Ic3faebaa4637520f5448b3d1acd78d5aaab3907a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Add an implementation for base-85 encoding and decoding [1]. Git binary
patches use this format.

Base-85 encoding assembles bytes as 32-bit MSB values, then converts
these values to base-85 numbers (always 5 bytes) encoded as printable
ASCII characters. Decoding base-85 is the reverse operation. Note
that decoding may overflow on invalid input as 85^5 > 2^32. Encodings
always have a length that is a multiple of 5. If input length is not
divisible by 4, padding bytes are (logically) added, which are ignored
when decoding. The encoding for n bytes has thus always exactly length
(n + 3) / 4 * 5 in integer arithmetic (truncating division).

Includes tests.

[1] https://datatracker.ietf.org/doc/html/rfc1924

Bug: 371725
Change-Id: Ib5b9a503cd62cf70e080a4fb38c8cd1eeeaebcfe
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Change-Id: Iaed25dac0bc9af8f3fda6138a5f9fe553bff5d39
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.

Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Don't create the stream eagerly in lock(); that may cause JGit to
exceed OS or JVM limits on open file descriptors if many locks need
to be created, for instance when creating many refs. Instead create
the output stream only when one really needs to write something.

Bug: 573328
Change-Id: If9441ed40494d46f594a896d34a5c4f56f91ebf4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Otherwise a post-commit hook cannot modify the index.

Bug: 566934
Change-Id: I0093dccd93b2064f243544b516bdce198afdb18b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Git config http.cookieFile must have ~ expansion, compare [1].

It also should be an absolute path. While a relative path is allowed,
C git just passes the value on to libcurl, so it'll be relative to the
current working directory and thus not work in all directories.

Log a warning if the path is relative.

(Alternatives would be to throw an exception, or to resolve the path
relative to the .git directory, or relative to the working tree root,
or relative to the config file it occurs in. But C git does not seem
to do either.)

[1] https://github.com/git/git/commit/e5a39ad8e

Bug: 571798
Change-Id: I5cdab6061d0613ac7d8cb7977e5b97f5b88f562d
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

The PackFile class is intended to be a central place to do all
common pack filename manipulation and parsing to help reduce repeated
code and bugs. Use the PackFile class in the Pack class and in many
tests to ensure it works well in a variety of situations. Later changes
will expand use of PackFiles to even more areas.

Change-Id: I921b30f865759162bae46ddd2c6d669de06add4a
Signed-off-by: Nasser Grainawi <quic_nasserg@quicinc.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Include the full file path of the .gitignore file and the line number
of the invalid pattern. Also include the pattern itself.

.gitignore files inside the repository are reported with their
repository-relative path; files outside (from git config
core.excludesFile or .git/info/exclude) are reported with their
full absolute path.

Bug: 571143
Change-Id: Ibe5969679bc22cff923c62e3ab9801d90d6d06d1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

When a .gitignore pattern cannot be parsed include the pattern in the
log message. Just reporting "not closed bracket" isn't helpful if the
user doesn't know in which pattern the problem occurred.

Even better would be to include the full path of the .gitignore file
that contained the offending pattern. This is not implemented in this
change; it may need new API and needs more thought.

Bug: 571143
Change-Id: Id5b16d9cf550544ba3ad409a02041946fa8516ab
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

jgit clone --branch foo <url>

did not fail if the remote branch "foo" didn't exist in the remote
repository being cloned.

Bug: 546580
Change-Id: I55648ad3a39da4a5711dfa8e6d6682bb8190a6d6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Add a GpgSignatureVerifier interface, plus a factory to create
instances thereof that is provided via the ServiceLoader mechanism.

Implement the new interface for BouncyCastle. A verifier maintains
an internal LRU cache of previously found public keys to speed up
verifying multiple objects (tag or commits). Mergetags are not handled.

Provide a new VerifySignatureCommand in org.eclipse.jgit.api together
with a factory method Git.verifySignature(). The command can verify
signatures on tags or commits, and can be limited to accept only tags
or commits. Provide a new public WrongObjectTypeException thrown when
the command is limited to either tags or commits and a name resolves
to some other object kind.

In jgit.pgm, implement "git tag -v", "git log --show-signature", and
"git show --show-signature". The output is similar to command-line
gpg invoked via git, but not identical. In particular, lines are not
prefixed by "gpg:" but by "bc:".

Trust levels for public keys are read from the keys' trust packets,
not from GPG's internal trust database. A trust packet may or may
not be set. Command-line GPG produces more warning lines depending
on the trust level, warning about keys with a trust level below
"full".

There are no unit tests because JGit still doesn't have any setup to
do signing unit tests; this would require at least a faked .gpg
directory with pre-created key rings and keys, and a way to make the
BouncyCastle classes use that directory instead of the default. See
bug 547538 and also bug 544847.

Tested manually with a small test repository containing signed and
unsigned commits and tags, with signatures made with different keys
and made by command-line git using GPG 2.2.25 and by JGit using
BouncyCastle 1.65.

Bug: 547751
Change-Id: If7e34aeed6ca6636a92bf774d893d98f6d459181
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

If the caller knows already HTTP Basic authentication will be needed
and if it also already has the username and password, preemptive
authentication is a little bit more efficient since it avoids the
initial 401 response.

Add a setPreemptiveBasicAuthentication(username, password) method
to TransportHttp. Client code could call this for instance in a
TransportConfigCallback. The method throws an IllegalStateException
if it is called after an HTTP request has already been made.

Additionally, a URI can include userinfo. Although it is not
recommended to put passwords in URIs, JGit's URIish and also the
Java URL and URI classes still allow it. The underlying HTTP
connection may omit these fields though. If present, take these
fields as additional source for preemptive Basic authentication if
setPreemptiveBasicAuthentication() has not been called.

No preemptive authentication will be done if the connection is
redirected to a different host.

Add tests.

Bug: 541327
Change-Id: Id00b975e56a15b532de96f7bbce48106d992a22b
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

TransportHttp makes several HTTP requests. The SSLContext and socket
factory must be shared over these requests, otherwise authentication
information may not be propagated correctly from one request to the
next. This is important for authentication mechanisms that rely on
client-side state, like NEGOTIATE (either NTLM, if the underlying HTTP
library supports it, or Kerberos). In particular, SPNEGO cannot
authenticate on a POST request; the authentication must come from the
initial GET request, which implies that the POST request must use the
same SSLContext and socket factory that was used for the GET.

Change the way HTTPS connections are configured. Introduce the concept
of a GitSession, which is a client-side HTTP session over several HTTPS
requests. TransportHttp creates such a session and uses it to configure
all HTTP requests during that session (fetch or push). This gives a way
to abstract away the differences between JDK and Apache HTTP connections
and to configure SSL setup outside.

A GitSession can maintain state and thus give all HTTP requests in a
session the same socket factory.

Introduce an extension interface HttpConnectionFactory2 that adds a
method to obtain a new GitSession. Implement this for both existing
HTTP connection factories. Change TransportHttp to use the new
GitSession to configure HTTP connections.

The old methods for disabling SSL verification still exist to support
possibly external connection and connection factory implementations
that do not make use of the new GitSession yet.

Bug: 535850
Change-Id: Iedf67464e4e353c1883447c13c86b5a838e678f1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Previously, TransportHttp always used the globally set connection
factory. This is problematic if that global factory is changed in
the middle of a fetch or push operation. Initialize the factory to
use in the constructor, then use that factory for all HTTP requests
made through this transport. Provide a setter and a getter for it
so that client code can customize the factory, if needed, in a
TransportConfigCallback.

Once a factory has been used on a TransportHttp instance it cannot
be changed anymore.

Make the global static factory reference volatile.

Change-Id: I7c6ee16680407d3724e901c426db174a3125ba1c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.

A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.

In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.

BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)

BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (stateless protocol, simplified ACK handling,
delimiters, section headers).

In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.

Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. The SSH tests are much slower and much more
focused on the SSH protocol and SSH key handling. Factor out two
very simple cloning and pulling tests and make those run with
protocol V2.

Bug: 553083
Change-Id: I357c7f5daa7efb2872f1c64ee6f6d54229031ae1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Add the two config constants from C git that can switch on signing
of annotated tags. Add them to the GpgConfig, and implement actually
signing a tag in TagCommand.

The interactions between command line options for "git tag" and config
options is a bit murky in C git. There are two config settings for it:

* tag.gpgSign is the main option, if set to true, it kicks in if
  neither -s nor -u are given on the command line.
* tag.forceSignAnnotated signs only tags created via "git tag -m",
  but only if command-line option "-a" is not present. It applies
  even if tag.gpgSign is set explicitly to false.

Giving -s or -u on the command line also forces an annotated tag
since lightweight tags cannot be signed.

Bug: 386908
Change-Id: Ic8a1a44b5f12f47d5cdf3aae2456c1f6ca9ef057
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Factor out a common ObjectBuilder as super class of CommitBuilder
and TagBuilder, and make the GpgSigner work on ObjectBuilder.

In order not to break API, add the new method for signing an
ObjectBuilder in a new interface GpgObjectSigner.

The signature for a tag is just tacked onto the end of the tag
message. The message of a signed tag must end in LF.

Bug: 386908
Change-Id: I5e021e3c927f4051825cd7355b129113b949455e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Change-Id: Ie245bf5c8c924dfb1f0f40b8bcdcb1e6f5815526
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

This reverts commit f802f06e7f.

I had misunderstood how protocol V2 works. This implementation only
works if the negotiation during fetch is done in one round.

Fixing this is substantial work in BasePackFetchConnection. Basically
I think I'd have to change back negotiate to the V0 version, and have
a doFetch() that does

  if protocol V2
    doFetchV2()
  else
    doFetchV0()

with doFetchV0 the old code, and doFetchV2 completely new.

Plus there would need to be a HTTP test case requiring several
negotiation rounds.

This is a couple of days work at least, and I don't know when I will
have the time to revisit this. So although the rest of the code is
fine I prefer to back this out completely and not leave a only half
working implementation in the code for an indeterminate time.

Bug: 553083
Change-Id: Icbbbb09882b3b83f9897deac4a06d5f8dc99d84e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Make all transports request protocol V2 when fetching. Depending on
the transport, set the GIT_PROTOCOL environment variable (file and
ssh), pass the Git-Protocol header (http), or set the hidden
"\0version=2\0" (git anon). We'll fall back to V0 if the server
doesn't reply with a version 2 answer.

A user can control which protocol the client requests via the git
config protocol.version; if not set, JGit requests protocol V2 for
fetching. Pushing always uses protocol V0 still.

In the API, there is only a new Transport.openFetch() version that
takes a collection of RefSpecs plus additional patterns to construct
the Ref prefixes for the "ls-refs" command in protocol V2. If none
are given, the server will still advertise all refs, even in protocol
V2.

BasePackConnection.readAdvertisedRefs() handles falling back to
protocol V0. It newly returns true if V0 was used and the advertised
refs were read, and false if V2 is used and an explicit "ls-refs" is
needed. (This can't be done transparently inside readAdvertisedRefs()
because a "stateless RPC" transport like TransportHttp may need to
open a new connection for writing.)

BasePackFetchConnection implements the changes needed for the protocol
V2 "fetch" command (simplified ACK handling, delimiters, section
headers).

In TransportHttp, change readSmartHeaders() to also recognize the
"version 2" packet line as a valid smart server indication.

Adapt tests, and run all the HTTP tests not only with both HTTP
connection factories (JDK and Apache HttpClient) but also with both
protocol V0 and V2. Do the same for the SSH transport tests.

Bug: 553083
Change-Id: Ice9866aa78020f5ca8f397cde84dc224bf5d41b4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Validate the extra headers and log but otherwise ignore invalid
headers. An empty http.extraHeader starts the list afresh.

The http.userAgent is restricted to printable 7-bit ASCII, other
characters are replaced by '.'.

Moves a support method from the ssh.apache bundle to HttpSupport in
the main JGit bundle.

Bug:541500
Change-Id: Id2d8df12914e2cdbd936ff00dc824d8f871bd580
Signed-off-by: James Wynn <james@jameswynn.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Previous code used a minimum granularity of 1 microsecond and would
iterate 233 times on a system where the resolution is 1 second (for
instance, Java 8 on Mac APFS).

New code uses a binary search between the maximum we care about (2
seconds) and zero, with a minimum granularity of also 1 microsecond.
This takes at most 19 iterations (guaranteed). For a file system with 1
second resolution, it takes 4 iterations (1s, 0.5s, 0.8s, 0.9s). With
an up-front check at 1 microsecond and at 1 millisecond this performs
equally well as the old code on file systems with a fine resolution.
(For instance, Java 11 on Mac APFS.)

Also handle obscure cases where the file timestamp implementation may
yield bogus values (as observed on HP NonStop). If such an error case
occurs, log a warning and abort the measurement at the last good value.

Bug: 565707
Change-Id: I82a96729b50c284be7c23fbdf3d0df1bddf60e41
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

LockFile.lock() will create it anyway when the config file is created.

Bug: 565637
Change-Id: I078b89a695193fd76f130f6de7ac1cf26d2f8f0f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Index format version 4 was introduced in C git in 2012. It's about
time that JGit can deal with it.

Version 4 added prefix path compression. Instead of writing the full
path for each index entry to disk, only the difference to the previous
entry's path is written: a variable-encoded int telling how many bytes
to remove from the previous entry's path to get the common prefix,
followed by the new suffix.

Also, cache entries in a version 4 index are not padded anymore.

Internally, version 3 and version 4 index entries are identical; it's
only the stored format that changes.

Implement this path compression, and make sure we write an index file
that we read previously in the same format. (Only changing from version
2 to version 3 if there are extended flags.)

Add support for the "feature.manyFiles" and the "index.version" git
configs, and honor them when writing a new index file.

Add tests, including a compatibility test that verifies that JGit can
read a version 4 index generated by C git and write an identical
version 4 index.

Bug: 565774
Change-Id: Id83241cf009e50f950eb42f8d56b834fb47da1ed
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

SshSupport.runSshCommand() had a comment that wait with time-out
could not be used because JSchProcess.exitValue() threw the wrong
unchecked exception when the process was still running.

Fix this and make JSchProcess.exitValue() throw the right exception,
then wait with a time-out in SshSupport.

The Apache sshd client's SshdExecProcess has always used the correct
IllegalThreadStateException.

Add tests for SshSupport.runCommand().

Change-Id: Id30893174ae8be3b9a16119674049337b0cf4381
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Motivation: JSch serves as 'default' implementations of the SSH
transport. If a client application does not use it then there is no need
to pull in this dependency.

Move the classes depending on JSch to an OSGi fragment extending the
org.eclipse.jgit bundle and keep them in the same package as before
since moving them to another package would break API. Defer moving them
to a separate package to the next major release.

Add a new feature org.eclipse.jgit.ssh.jsch feature to enable
installation. With that users can now decide which of the ssh client
integrations (JCraft JSch or Apache Mina SSHD) they want to install.
We will remove the JCraft JSch integration in a later step due to the
reasons discussed in bug 520927.

Bug: 553625
Change-Id: I5979c8a9dbbe878a2e8ac0fbfde7230059d74dc2
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>

Motivation: BouncyCastle serves as 'default' implementation of
the GPG Signer. If a client application does not use it there is no need
to pull in this dependency, especially since BouncyCastle is a large
library.

Move the classes depending on BouncyCastle to an OSGi fragment extending
the org.eclipse.jgit bundle. They are moved to a distinct internal
package in order to avoid split packages. This doesn't break public API
since these classes were already in an internal package before this
change.

Add a new feature org.eclipse.jgit.gpg.bc to enable installation. With
that users can now decide if they want to install it.

Attempts to sign a commit if org.eclipse.jgit.gpg.bc isn't available
will result in ServiceUnavailableException being thrown.

Bug: 559106
Change-Id: I42fd6c00002e17aa9a7be96ae434b538ea86ccf8
Also-by: Michael Dardis <git@md-5.net>
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: David Ostrovsky <david@ostrovsky.org>

If the determination of the user home directory produces a Java File
object with an invalid path, spurious exceptions may occur at the
most inopportune moments anytime later. In the case in the linked bug
report, start-up of EGit failed, leading to numerous user-visible
problems in Eclipse.

So validate the return value of FS.userHomeImpl(). If converting that
File to a Path throws an exception, log the problem and fall back to
Java system property user.home. If that also is not valid, use null.

(A null user home directory is allowed by FS, and calling in Java
new File(null, "some_string") is fine and produces a File relative
to the current working directory.)

Bug: 563739
Change-Id: If9eec0f9a31a45bd815231706285c71b09f8cf56
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

The error message for an Exception thrown by StartGenerator when given
both the TOPO flag and the TOPO_KEEP_BRANCH_TOGETHER flag mentions a
non-existent flag, TOPO_NON_INTERMIX. The error message was introduced
in commit e498d43.

Replace TOPO_NON_INTERMIX with TOPO_KEEP_BRANCH_TOGETHER in the error
message of an Exception thrown by the StartGenerator when the TOPO flag
is provided together with the TOPO_KEEP_BRANCH_TOGETHER flag.

Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: Id24640dc08e96a196508fe38ce144aa7e035082f

The topological sort algorithm in TopoSortGenerator for RevWalk may mix
multiple lines of history, producing results that differ from C git's
git-log whose man page states: "Show no parents before all of its
children are shown, and avoid showing commits on multiple lines of
history intermixed." Lines of history are mixed because
TopoSortGenerator merely delays producing a commit until all of its
children have been produced; it does not immediately produce a commit
after its last child has been produced.

Therefore, add a new RevSort option called TOPO_KEEP_BRANCH_TOGETHER
with a new topo sort algorithm in TopoNonIntermixGenerator. In the
Generator, when the last child of a commit has been produced, unpop
that commit so that it will be returned upon the subsequent call to
next(). To avoid producing duplicates, mark commits that have not yet
been produced as TOPO_QUEUED so that when a commit is popped, it is
produced if and only if TOPO_QUEUED is set.

To support nesting with other generators that may produce the same
commit multiple times like DepthGenerator (for example, StartGenerator
does this), do not increment parent inDegree for the same child commit
more than once.

Commit b5e764abd2 modified the existing
TopoSortGenerator to avoid mixing lines of history, but it was reverted
in e40c38ab08 because the new behavior
caused problems for EGit users. This motivated adding a new Generator
for the new behavior.

Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
Change-Id: Icbb24eac98c00e45c175b01e1c8122554f617933

Does not fix any issue but prevents user from shooting themselves in the
foot with improper configuration.

Suggested by Demetr Starshov at https://git.eclipse.org/r/#/c/157681/

Change-Id: I006d65022f0a7d4066970825d00080c59404fdc3
Signed-off-by: Michael Dardis <git@md-5.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

This is the format given by the Eclipse legal doc generator [1].

[1] https://www.eclipse.org/projects/tools/documentation.php?id=technology.jgit

Bug: 548298
Change-Id: I8d8cabc998ba1b083e3f0906a8d558d391ffb6c4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

SSLContext.getInstance("TLS") by default behaves differently on IBM
JDK than on Oracle or OpenJDK.[1] On IBM JDK one gets sockets that
have only TLSv1 enabled, which makes HTTPS connections fail since most
servers refuse this old protocol version. On Oracle JDK/OpenJDK, one
gets sockets with all available protocol versions enabled.

Explicitly enable all available TLS protocol versions to make
HTTPS connections work also on IBM JDK.

[1] https://www.ibm.com/support/knowledgecenter/en/SSYKE2_8.0.0/com.ibm.java.security.component.80.doc/security-component/jsse2Docs/matchsslcontext_tls.html#matchsslcontext_tls

Bug: 558709
Change-Id: I5ffc57a78e67a6239b9dad54840a49a8ed28930a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Change-Id: I5d3acaa883ee7eb8d244b55b3e708cbe018690c6
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

When a conflicting file was blamed, JGit would not identify lines
coming from the merge parents. The main cause for this was that
Blame and BlameCommand simply added the first DirCacheEntry found
for a file to its queue of candidates (blobs or commits) to consider.
In case of a conflict this typically is the merge base commit, and
comparing a auto-merged contents against that base would yield
incorrect results.

Such cases have to be handled specially. The candidate to be
considered by the blame must use the working tree contents, but
at the same time behave like a merge commit/candidate with HEAD
and the MERGE_HEADs as parents. Canonical git does something very
similar, see [1].

Implement that and add tests.

I first did this for the JGit pgm Blame command. When I then tried
to do the same in BlameCommand, I noticed that the latter also
included some fancy but incomplete CR-LF handling. In order to
be able to use the new BlameGenerator.prepareHead() also in
BlameCommand this CR-LF handling was also moved into BlameGenerator
and corrected in doing so.

(Just considering the git config settings was not good enough,
CR-LF behavior can also be influenced by .gitattributes, and even
by whether the file in the index has CR-LF. To correctly determine
CR-LF handling for check-in one needs to do a TreeWalk with at
least a FileTreeIterator and a DirCacheIterator.)

[1] https://github.com/git/git/blob/v2.22.0/blame.c#L174

Bug: 434330
Change-Id: I9d763dd6ba478b0b6ebf9456049d6301f478ef7c
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Reftable is a binary, block-based storage format for the ref-database.
It provides several advantages over the traditional packed + loose
storage format:

 * O(1) write performance, even for deletions and transactions.

 * atomic updates to the ref database.

 * O(log N) lookup and prefix scans

 * free from restrictions imposed by the file system: it is
   case-sensitive even on case-insensitive file systems, and has
   no inherent limitations for directory/file conflicts

 * prefix compression reduces space usage for repetitive ref names,
   such as gerrit's refs/changes/xx/xxxxx format.

FileReftableDatabase is based on FileReftableStack, which does
compactions inline. This is simple, and has good median performance,
but every so often it will rewrite the entire ref database.

For testing, a FileReftableTest (mirroring RefUpdateTest) is added to
check for Reftable specific behavior. This must be done separately, as
reflogs have different semantics.

Add a reftable flavor of BatchRefUpdateTest.

Add a FileReftableStackTest to exercise compaction.

Add FileRepository#convertToReftable so existing testdata can be
reused.

CQ: 21007
Change-Id: I1837f268e91c6b446cb0155061727dbaccb714b8
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

This avoids polluting hand-crafted user level config with
auto-configured options which might disturb in environments where
the user level config is replicated between different machines.

Add a jgit config as parent of the system level config. Persist
measured timestamp resolutions always in this jgit config and read it
via the user global config. This has the effect that auto-configured
timestamp resolution will be used by default and can be overridden in
either the system level or user level config.

Store the jgit config under the XDG_CONFIG_HOME directory following the
XDG base directory specification [1] in order to ensure that we have
write permissions to persist the file. This has the effect that each OS
user will use its jgit config since they typically use different
XDG_CONFIG_HOME directories.

If the environment variable XDG_CONFIG_HOME is defined the jgit config
file is located at $XDG_CONFIG_HOME/jgit/config otherwise the default is
~/.config/jgit/config.

If you want to avoid redundant measurement for different OS users
manually copy the values measured and auto-configured for one OS user to
the system level git config.

[1] https://wiki.archlinux.org/index.php/XDG_Base_Directory

Bug: 551850
Change-Id: I0022bd40ae62f82e5b964c2ea25822eb55d94687
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Support the core.hooksPath git config. This can be an absolute or
relative path of a directory where to find git hooks; a relative
path is resolved relative to the directory the hook will run in.

Bug: 500266
Change-Id: I671999a6386a837e897c31718583c91d8035f3ba
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

Change-Id: I995d7a1b6ab2866221eee9f5cb828b97192daf4a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>

Since commit c3b0dec509fe136c5417422f31898b5a4e2d5e02, Git has
disallowed writing a non-commit to refs/heads/* refs.  JGit still
allows that, which can put users in a bad situation.  For example,

	git push origin v1.0:master

pushes the tag object v1.0 to refs/heads/master, instead of the
intended commit object v1.0^{commit}.

Prevent that by validating that the target of the ref points to a
commit object when pushing to refs/heads/*.

Git performs the same check at a lower level (in the RefDatabase).  We
could do the same here, but for now let's start conservatively by
handling it in pushes first.

[jn: fleshed out commit message]

Change-Id: I8f98ae6d8acbcd5ef7553ec732bc096cb6eb7c4e
Signed-off-by: Yunjie Li <yunjieli@google.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>

It's expected that jgit should work without native git installation.
In such case Security Manager can be configured to deny access to the
files outside of git repository. JGit tries to find cygwin
installation. If Security manager restricts access to some folders
in PATH, it should be considered that those folders are absent
for jgit.
Also JGit tries to detect if symbolic links are supported by OS. If
security manager forbids creation of symlinks, it should be assumed
that symlinks aren't supported.

Bug: 550115
Change-Id: Ic4b243cada604bc1090db6cc1cfd74f0fa324b98
Signed-off-by: Nail Samatov <sanail@yandex.ru>

Also use MessageFormat as done elsewhere.

Change-Id: I36a4df9002310fa28321de9d325ee213f3cbd433
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

So far the git configuration and the system wide git configuration were
always reloaded when jgit accessed these global configuration files to
access global configuration options which are not in the context of a
single git repository. Cache these configurations in SystemReader and
only reload them if their file metadata observed using FileSnapshot
indicates a modification.

Change-Id: I092fe11a5d95f1c5799273cacfc7a415d0b7786c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

- fix handling of interrupts in FileStoreAttributes#saveToConfig
- increase retry wait time to 100ms
- don't wait after last retry
- dont retry if failure is caused by another exception than
LockFailedException

Change-Id: I108c012717d2bcce71f2c6cb9cf0879de704ebc2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Change-Id: I4de75d12ec9e61193494916307289378cdb6220e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Cache FileStoreAttributeCache entries since looking up FileStore for a
file may be expensive on some platforms.

Implement a simple LRU cache based on ConcurrentHashMap using a simple
long counter to order access to cache entries.

Change-Id: I4881fa938ad2f17712c05da857838073a2fc4ddb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Also-By: Marc Strapetz <marc.strapetz@syntevo.com>