Fix possible NegativeArraySizeException in PackIndexV1
Due to an integer overflow bug, the current "Index file is too large
for jgit" check did not work properly and subsequently a
NegativeArraySizeException was raised.
Change-Id: I2736efb28987c29e56bc946563b7fa781898a94a
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
FS: use binary search to determine filesystem timestamp resolution
Previous code used a minimum granularity of 1 microsecond and would
iterate 233 times on a system where the resolution is 1 second (for
instance, Java 8 on Mac APFS).
New code uses a binary search between the maximum we care about (2
seconds) and zero, with a minimum granularity of also 1 microsecond.
This takes at most 19 iterations (guaranteed). For a file system with 1
second resolution, it takes 4 iterations (1s, 0.5s, 0.8s, 0.9s). With
an up-front check at 1 microsecond and at 1 millisecond this performs
equally well as the old code on file systems with a fine resolution.
(For instance, Java 11 on Mac APFS.)
Also handle obscure cases where the file timestamp implementation may
yield bogus values (as observed on HP NonStop). If such an error case
occurs, log a warning and abort the measurement at the last good value.
Bug: 565707
Change-Id: I82a96729b50c284be7c23fbdf3d0df1bddf60e41
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Do not prematurely create directory of jgit's XDG config file
LockFile.lock() will create it anyway when the config file is created.
Bug: 565637
Change-Id: I078b89a695193fd76f130f6de7ac1cf26d2f8f0f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Otherwise locking problems may ensue if the JGit config itself is
on a different file system. Since the internal is already updated,
it is not really important when exactly the value gets persisted.
By queueing up separate Runnables executed by a single thread we
avoid concurrent write access to the JGit config, and nested calls
to getFileStoreAttributes(Path) result in serialized attempts to
write.
The thread for writing the config must not be a daemon thread. If
it were, JVM shutdown might kill it anytime, which may lead to
the config not being written, or worse, a config.lock file being
left behind.
Bug: 566170
Change-Id: I07e3d4c5e029d3cec9ab5895002fc4e0c7948c40
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
If the background job is a little late, the true result might
arrive and be cached later. So make sure we don't cache the large
fallback resolution in the per-directory cache. Otherwise we'd work
with the large fallback until the next restart.
Bug: 566170
Change-Id: I7354a6cfddfc0c05144bb0aa41c23029bd4f6af0
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Keep line endings for text files committed with CR/LF on text=auto
Git never converts line endings if the version in the repository is a
text file with CR/LF and text=auto. See [1]: "When the file has been
committed with CRLF, no conversion is done."
Because the sentence just before is about converting line endings on
check-in, I had understood that in commit 60cf85a [2] to mean that no
conversion on check-in was to be done. However, as bug 565048 and a
code inspection of the C git code showed it really means no conversion
is done on check-in *or check-out*.
If the text attribute is not set but core.autocrlf = true, this is
the same as text=auto eol=crlf. C git does not convert on check-out
even on text=auto eol=lf if the index version is a text file with
CR/LF.
For check-in, one has to look at the intended target, which is done
in WorkingTreeIterator since commit 60cf85a. For check-out, it can
be done by looking at the source and can thus be done in the
AutoLFOutputStream.
Additionally, provide a constructor for AutoLFInputStream to do
the same; for cases where the equivalent of a check-out is done via
an input stream obtained from a blob. (EGit does that in its
GitBlobStorage for the Eclipse compare framework; it's more efficient
than using a TemporaryBuffer and DirCacheCheckout.getContent(), and
it avoids the need for a temporary file.)
Adapt existing tests, and add new checkout and merge tests to verify
the resulting files have the correct line endings.
EGit's GitBlobStorage will need to call the new version of
EolStreamTypeUtil.wrapInputStream().
[1] https://git-scm.com/docs/gitattributes#Documentation/gitattributes.txt-Settostringvalueauto
[2] https://git.eclipse.org/r/c/jgit/jgit/+/127324
Bug: 565048
Change-Id: If1282ef43e2abd00263541bd10a01fe1f5c619fc
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
The WindowCache is configured statically with a default
WindowCacheConfig. The default config says (for backwards
compatibility reasons) to publish the MBean. As a result,
the MBean always gets published.
By delaying the MBean registration until the first call to
getInstance() or get(PackFile, long) we can avoid the forced
registration and do it only if not re-configured in the meantime
not to publish the bean. (As is done by Egit, to avoid a very
early costly access to the user and system config during plug-in
activation.)
Bug: 563740
Change-Id: I8a941342c0833acee2107515e64299aada7e0520
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Index format version 4 was introduced in C git in 2012. It's about
time that JGit can deal with it.
Version 4 added prefix path compression. Instead of writing the full
path for each index entry to disk, only the difference to the previous
entry's path is written: a variable-encoded int telling how many bytes
to remove from the previous entry's path to get the common prefix,
followed by the new suffix.
Also, cache entries in a version 4 index are not padded anymore.
Internally, version 3 and version 4 index entries are identical; it's
only the stored format that changes.
Implement this path compression, and make sure we write an index file
that we read previously in the same format. (Only changing from version
2 to version 3 if there are extended flags.)
Add support for the "feature.manyFiles" and the "index.version" git
configs, and honor them when writing a new index file.
Add tests, including a compatibility test that verifies that JGit can
read a version 4 index generated by C git and write an identical
version 4 index.
Bug: 565774
Change-Id: Id83241cf009e50f950eb42f8d56b834fb47da1ed
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Update javadoc for RemoteSession and SshSessionFactory
The timeout on RemoteSession.exec() cannot be a timeout for the
whole command. It can only be a timeout for setting up the process;
after that it's the application's responsibility to implement some
timeout for the execution of the command, for instance by calling
Process.waitFor(int, TimeUnit) or through other means.
Sessions returned by an SshSessionFactory are already connected and
authenticated -- they must be, because RemoteSession offers no
operations for connecting or authenticating a session.
Change the implementation of SshdExecProcess.waitFor() to wait
indefinitely. The original implementation used the timeout from
RemoteSession.exec() because of that erroneous javadoc.
Change-Id: I3c7ede24ab66d4c81f72d178ce5012d383cd826e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
SshSupport.runSshCommand() had a comment that wait with time-out
could not be used because JSchProcess.exitValue() threw the wrong
unchecked exception when the process was still running.
Fix this and make JSchProcess.exitValue() throw the right exception,
then wait with a time-out in SshSupport.
The Apache sshd client's SshdExecProcess has always used the correct
IllegalThreadStateException.
Add tests for SshSupport.runCommand().
Change-Id: Id30893174ae8be3b9a16119674049337b0cf4381
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
sshd: work around a race condition in Apache MINA sshd 2.4.0/2.5.x
When exceptions occur very early in the SSH connection setup, it's
possible that an exception gets lost. A subsequent authentication
attempt may then never be notified of the failure, and then wait
indefinitely or until its timeout expires.
This is caused by race conditions in sshd. The issue has been reported
upstream as SSHD-1050,[1] but will be fixed at the earliest in sshd
2.6.0.
[1] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-1050
Bug: 565394
Change-Id: If9b62839db38f9e59a5e1137c2257039ba82de98
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
sshd: store per-session data on the sshd session object
Don't store session properties on the client but in a dedicated
per-session object that is attached to the sshd session.
Also make sure that each sshd session gets its own instance of
IdentityPasswordProvider that asks for passphrases of encrypted
private keys, and also store it on the session itself.
Bug: 563380
Change-Id: Ia88bf9f91cd22b5fd32b5972d8204d60f2de56bf
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Do not send empty blob in response to blob:none filter
If I create a repository containing an empty file and clone it
with
git clone --no-checkout --filter=blob:none \
https://url/of/repository
then I would expect no blobs to be transferred over the wire. Alas,
JGit rewrites filter=blob:none to filter=blob:limit=0, so if the
repository contains an empty file then the empty blob gets
transferred.
Fix it by teaching JGit about filters based on object type to
complement the existing filters based on object size. This prepares
us for other future filters such as object:none.
In particular, this means we do not need to look up the size of the
filtered blobs, which should speed up clones. Noticed by Anna
Pologova and Terry Parker.
Change-Id: Id4b234921a190c108d8be2c87f54dcbfa811602a
Signed-off-by: Jonathan Nieder <jrn@google.com>
Teach the FilterSpec serialization code about tree filters so they can
be communicated over the wire and understood by the server.
While we're here, harden the FilterSpec serialization code to throw
IllegalStateException if we encounter a FilterSpec that cannot be
expressed as a "filter" line. The only public API for creating a
Filterspec is to pass in a "filter" line to be parsed, so these should
not appear in practice.
Change-Id: I9664844059ffbc9c36eb829e2d860f198b9403a0
Signed-off-by: Jonathan Nieder <jrn@google.com>
Improve the SshTestGitServer API for accessing the server properties.
Instead of returning the raw property map, return the proper sshd API
abstraction PropertyResolver.
This makes the interface more resilient against upstream changes.
Change-Id: Ie5b685bddc4e59f3eb6c121026d3658d57618ca4
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
FS_POSIX: avoid prompt to install the XCode tools on OS X
OS X ships with a default /usr/bin/git that is just a wrapper that
at run-time delegates to the selected XCode toolchain, and that
prompts the user to install the XCode command line tools if not
already installed.
This is annoying for people who don't want to do so, since they'll
be prompted on each Eclipse start. Also, since on OS X the $PATH for
applications started via the GUI is not the same as the $PATH as set
via the shell profile, just using /usr/bin/git (which will normally
be found when JGit runs inside Eclipse) may give slightly surprising
results if the user has installed a non-Apple git and changed his
$PATH in the shell such that the non-Apple git is used in the shell.
(For instance by placing /usr/local/bin earlier on the path.) Eclipse
and the shell will use different git executables, and thus different
git system configs.
Therefore, try to find git via bash --login -c 'which git' not only
if we couldn't find it on $PATH but also if we found the default git
/usr/bin/git. If that finds some other git, use that. If the bash
approach also finds /usr/bin/git, double check via xcode-select -p
that an XCode git is present. If not, assume there is no git installed,
and work without any system config.
Bug: 564372
Change-Id: Ie9d010ebd9437a491ba5d92b4ffd1860c203f8ca
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use standard java.security to generate test keys, use sshd to write
public key files, and write PKCS#8 PEM files for our non-encrypted
test private keys. This is a format that both JSch and Apache MINA
sshd can read.
Change-Id: I6ec55cfd7346b672a7fb6139d51abfb06d81a394
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Use LinkedBlockingQueue for executor determining filesystem attributes
Using a fixed thread pool with unbounded LinkedBlockingQueue fixes the
RejectedExecutionException thrown if too many threads try to
concurrently determine filesystem attributes.
Comparing that to an alternative implementation using an unbounded
thread pool instead showed similar performance with the reproducer (in
range of 100-1000 threads in reproducer) on my mac:
threads time
fixed threadpool up to 5 threads with LinkedBlockingQueue of unlimited
queue size
100 1103 ms
200 1602 ms
300 2369 ms
500 4002 ms
1000 11071 ms
unbounded cached threadpool
100 1108 ms
200 1591 ms
300 2299 ms
500 4577 ms
1000 11196 ms
Bug: 564202
Change-Id: I773da7414a1dca8e548349442dca9b56643be946
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Bazel: Add workspace status command to stamp final artifact
Include implementation version in jgit library. This version is used
by other products that depend on JGit, and built using Bazel and not
consume officially released artifact from Central or Eclipse own Maven
repository.
Most notably, in Gerrit Code Review JGit agent that was previously
reported as "unknown", is now reported as:
JGit/v5.8.0.202006091008-r-16-g14c43828d
using this change [1].
[1] https://gerrit-review.googlesource.com/c/gerrit/+/272505
Change-Id: Ia50de9ac35b8dbe9e92d8ad7d0d14cd00f057863
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
DiffFormatter: correctly deal with tracked files in ignored folders
In JGit 5.0, the FileTreeIterator was changed to skip ignored folders
by default. To catch tracked files inside ignored folders, the tree
walk needs to have a DirCacheIterator, and the FileTreeIterator has
to know about that DirCacheIterator via setDirCacheIterator(). (Or
the optimization has to be switched off explicitly via
setWalkIgnoredDirectories(true).)
Skipping ignored directories is an important optimization in some
cases, for instance in node.js/npm projects, where we'd otherwise
traverse the whole huge and deep hierarchy of the typically ignored
node_modules folder.
While all uses of WorkingTreeIterator in JGit had been adapted,
DiffFormatter was forgotten. To make it work correctly (again) also
for such cases, make it set up a WorkingTreeeIterator automatically,
and make sure the WorkingTreeSource can find such files, too. Also
pass the repository to the TreeWalks used inside the DiffFormatter
to pick up the correct attributes, filters, and line-ending settings.
Bug: 565081
Change-Id: Ie88ac81166dc396ba28b83313964c1712b6ca199
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Make sure we don't produce a spurious empty line at the end.
Bug: 564428
Change-Id: Ib991d93fbd052baca65d32a7842f07f9ddeb8130
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
SSHD-1028:[1] server doesn't close server-side sessions properly when
client disconnects.
[1] https://issues.apache.org/jira/projects/SSHD/issues/SSHD-1028
Change-Id: I0d67f49e35abe8375cb1370a494dc01d0fb2c9b1
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Improve error message when receive.maxCommandBytes is exceeded
The message "Too many commands" implies there is a hard limit on the
number of commands, which isn't the case. The limit is on the total
size of the received data, as explained in change I84317d396 which
introduced the configuration setting receive.maxCommandBytes:
shorter reference names allow for more commands, longer reference
names permit fewer commands per batch.
Change the message to:
Commands size exceeds limit defined in receive.maxCommandBytes
Change-Id: I678b78f919b2fec8f8058f3403f2541c26a5d00e
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
LfsConnectionFactory#getLfsUrl: Fix unconditional break in for-loop
When iterating over the remote URLs to find one that matches "origin",
it always exits after the first iteration whether it has found the
remote or not. The break should be inside the conditional block so
that it exits when "origin" is found, otherwise continues to iterate
over the remaining remote URLs.
Found by Sonar Lint.
Change-Id: Ic969e54071d1cf095334007c1c1bab6579044dd2
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
DiffFormatterTest: Add a test to confirm the default rename detection settings
Add a test that confirms:
- No rename detector is initialized by default
- Rename detector is initialized after calling setDetectRenames(true)
- Rename limit and rename score have the default values 400 and
60, respectively. Note that there are no constants for these values
so the test hard codes them.
Change-Id: I327e2b348a40ef67d8a184e5ab09f4e9ab573e1c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-5.8:
Add new osgi fragments to maven-central deploy scripts
Do not require org.assertj.core.annotations
Change-Id: I338065e7d2bf95b59a13d09cff7aea0c7689fe42
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
MergedReftable: Include the last reftable in determining minUpdateIndex
MergedReftable ignores the last reftable in the stack while calculating the
minUpdateIndex.
Update the loop indices to include all reftables in the minUpdateIndex
calculation, while skipping position 0 as it is read outside the loop.
Change-Id: I12d3e714581e93d178be79c02408a67ab2bd838e
Signed-off-by: Minh Thai <mthai@google.com>
PackBitmapIndex: Not buffer inflated bitmap during bitmap creation.
Currently we're buffering the inflated bitmap entry in
BasePackBitmapIndex to optimize running time. However, this will use
lots of memory during the creation of the pack bitmap index file.
And change 161456, which rewrote the entire getBitmap method, increased
the fetch latency significantly.
This commit introduces getBitmapWithoutCaching method which is used in
the pack bitmap index file creation only and aims to save memory during
garbage collection and not increase fetch latency.
Change-Id: I7b982c9d4e38f5f6193eaa03894e894ba992b33b
Signed-off-by: Yunjie Li <yunjieli@google.com>
Remove workaround for signing jars using Tycho plugins
The workaround became obsolete when https://git.eclipse.org/r/#/c/16027/
was released.
Change-Id: Id20f79a1059550c1e5637fec30ae09a202cb2f2a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Matthias Sohn
Marc Strapetz
Thomas Wolf
Jonathan Nieder
David Ostrovsky
David Pursehouse
Minh Thai
Terry Parker
Yunjie Li
Sebastian Ratz