Since [1] the gerrit project includes jgit as a submodule, and has this
warning enabled, resulting in 100s of warnings in the console.

Also enable the warning here, and fix them.

At the same time, add missing braces around adjacent and nearby one-line
blocks.

[1] https://gerrit-review.googlesource.com/c/gerrit/+/227897

Change-Id: I81df3fc7ed6eedf6874ce1a3bedfa727a1897e4c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>

On recent VMs, collection.toArray(new T[0]) is faster than
collection.toArray(new T[collection.size()]). Since it is also more
readable, it should now be the preferred way of collection to array
conversion.

https://shipilev.net/blog/2016/arrays-wisdom-ancients/

Change-Id: I80388532fb4b2b0663ee1fe8baa94f5df55c8442
Signed-off-by: Michael Keppler <Michael.Keppler@gmx.de>

Change-Id: I8af6d07676a285f79635405e5891535a5adfd7e9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

There is at least one git server out there (GOGS) that does
not require authentication on the initial GET for
info/refs?service=git-receive-pack but that _does_ require
authentication for the subsequent POST to actually do the push.

This occurs on GOGS with public repositories; for private
repositories it wants authentication up front.

Handle this behavior by adding 401 handling to our POST request.
Note that this is suboptimal; we'll re-send the push data at
least twice if an authentication failure on POST occurs. It
would be much better if the server required authentication
up-front in the GET request.

Added authentication unit tests (using BASIC auth) to the
SmartClientSmartServerTest:

- clone with authentication
- clone with authentication but lacking CredentialsProvider
- clone with authentication and wrong password
- clone with authentication after redirect
- clone with authentication only on POST, but not on GET

Also tested manually in the wild using repositories at try.gogs.io.
That server offers only BASIC auth, so the other paths
(DIGEST, NEGOTIATE, fall back from DIGEST to BASIC) are untested
and I have no way to test them.

* public repository: GET unauthenticated, POST authenticated
  Also tested after clearing the credentials and then entering a
  wrong password: correctly asks three times during the HTTP
  POST for user name and password, then gives up.
* private repository: authentication already on GET; then gets
  applied correctly initially to the POST request, which succeeds.

Also fix the authentication to use the credentials for the redirected
URI if redirects had occurred. We must not present the credentials
for the original URI in that case. Consider a malicious redirect A->B:
this would allow server B to harvest the user credentials for server
A. The unit test for authentication after a redirect also tests for
this.

Bug: 513043
Change-Id: I97ee5058569efa1545a6c6f6edfd2b357c40592a
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

git-core follows HTTP redirects so JGit should also provide this.

Implement config setting http.followRedirects with possible values
"false" (= never), "true" (= always), and "initial" (only on GET, but
not on POST).[1]

We must do our own redirect handling and cannot rely on the support
that the underlying real connection may offer. At least the JDK's
HttpURLConnection has two features that get in the way:

* it does not allow cross-protocol redirects and thus fails on
  http->https redirects (for instance, on Github).
* it translates a redirect after a POST to a GET unless the system
  property "http.strictPostRedirect" is set to true. We don't want
  to manipulate that system setting nor require it.

Additionally, git has its own rules about what redirects it accepts;[2]
for instance, it does not allow a redirect that adds query arguments.

We handle response codes 301, 302, 303, and 307 as per RFC 2616.[3]
On POST we do not handle 303, and we follow redirects only if
http.followRedirects == true.

Redirects are followed only a certain number of times. There are two
ways to control that limit:

* by default, the limit is given by the http.maxRedirects system
  property that is also used by the JDK. If the system property is
  not set, the default is 5. (This is much lower than the JDK default
  of 20, but I don't see the value of following so many redirects.)
* this can be overwritten by a http.maxRedirects git config setting.

The JGit http.* git config settings are currently all global; JGit has
no support yet for URI-specific settings "http.<pattern>.name". Adding
support for that is well beyond the scope of this change.

Like git-core, we log every redirect attempt (LOG.info) so that users
may know about the redirection having occurred.

Extends the test framework to configure an AppServer with HTTPS support
so that we can test cloning via HTTPS and redirections involving HTTPS.

[1] https://git-scm.com/docs/git-config
[2] 6628eb41db
[3] https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html

CQ: 13987
Bug: 465167
Change-Id: I86518cb76842f7d326b51f8715e3bbf8ada89859
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>

* Adapt to API removals in jetty 9.4+
* Manifests changed to restrict jetty to [9.4.5,10.0.0)

Bug: 514336
Bug: 516514
Change-Id: Ifcfd968084dfa6db0ae07cf541d33a6cdedc1ee2
Signed-off-by: Mat Booth <mat.booth@redhat.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Change-Id: Ia728f1d033ecdf96b22945bc1ae38e5cb11064dd
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

This reverts commit e05caf91f1.

Change-Id: Ia4287f130034a790759b5035505a093b4616a05a

MappedLoginService is no longer available in Jetty 9.4 therefore base
TestLoginService on AbstractLoginService.

Apparently Jetty now uses slf4j hence adapt RecordingLogger accordingly
so we can log error messages containing slf4j style formatting anchors
"{}".

Change-Id: Ibb36aba8782882936849b6102001a88b699bb65c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
(cherry picked from commit 5e8e2179b2)

Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.

Enable the warning in Eclipse, and fix all occurrences.

Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>

Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:

  The method <method> of type <type> should be tagged with @Override
  since it actually overrides a superclass method

Justification for this warning is described in:

  http://stackoverflow.com/a/94411/381622

Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.

Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.

Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>

MappedLoginService is no longer available in Jetty 9.4 therefore base
TestLoginService on AbstractLoginService.

Apparently Jetty now uses slf4j hence adapt RecordingLogger accordingly
so we can log error messages containing slf4j style formatting anchors
"{}".

Change-Id: Ibb36aba8782882936849b6102001a88b699bb65c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Change-Id: Ic27106f38af14833147f739179c3ef8ec6b6ee31
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>

9aa3748 added dummy implementations for loadRoleInfo() and
loadUserInfo() to class MappedLoginService to fix compile errors in
Eclipse when using 4.6 target platform which brings Jetty 9.3 adding
these two methods. Unfortunately this causes errors when using non 4.6
target platform coming with an older Jetty version. Fix this by
extracting the anonymous subclass of MappedLoginService which allows to
suppress the unused private method errors in Eclipse.

Change-Id: I75baeea7ff4502ce9ef2b541b3c0555da5535d79
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Eclipse Neon comes with Jetty 9.3 which is causing unimplemented
abstract method errors in test class AppServer when using the JGit or
EGit Neon target platform. Fix this by adding dummy implementations.

Change-Id: Ie49107d814a846997de95f149e91fe1ec2fbe4d8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Implement LfsProtocolServlet handling the "Git LFS v1 Batch API"
protocol [1]. Add a simple file system based LFS content store and the
debug-lfs-store command to simplify testing.

Introduce a LargeFileRepository interface to enable additional storage
implementation while reusing the same protocol implementation.

At the client side we have to configure the lfs.url, specify that
we use the batch API and we don't use authentication:

  [lfs]
	  url = http://host:port/lfs
	  batch = true
  [lfs "http://host:port/lfs"]
	  access = none

the git-lfs client appends the "objects/batch" to the lfs.url.

Hard code an Authorization header in the FileLfsRepository.getAction
because then git-lfs client will skip asking for credentials. It will
just forward the Authorization header from the response to the
download/upload request.

The FileLfsServlet supports file content storage for "Large File
Storage" (LFS) server as defined by the Github LFS API [2].

- upload and download of large files is probably network bound hence use
  an asynchronous servlet for good scalability
- simple object storage in file system with 2 level fan-out
- use LockFile to protect writing large objects against multiple
  concurrent uploads of the same object
- to prevent corrupt uploads the uploaded file is rejected if its hash
  doesn't match id given in URL

The debug-lfs-store command is used to run the LfsProtocolServlet and,
optionally, the FileLfsServlet which makes it easier to setup a
local test server.

[1]
https://github.com/github/git-lfs/blob/master/docs/api/http-v1-batch.md
[2] https://github.com/github/git-lfs/tree/master/docs/api

Bug: 472961
Change-Id: I7378da5575159d2195138d799704880c5c82d5f3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>

Change-Id: Iace29e6e99836019bb603ce06a08b91bada7c627
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Bug: 380302
Change-Id: Ie66d495481776469ff2aa603c550557cff82cafc
Suggested-By: Joakim Erdfelt <joakim@intalio.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Jetty 8.1.3 comes with Juno M7 and this version can be installed from
http://download.eclipse.org/jetty/updates/jetty-bundles-8.x/8.1.3.v20120416/

Change-Id: Ifc4bfbb3efbab0f5bfbde74f0b2ddc5a2f9ee6a5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Eclipse has some problem re-running single JUnit tests if
the tests are in Junit 3 format, but the JUnit 4 launcher
is used. This was quite unnecessary and the move was not
completed. We still have no JUnit4 test.

This completes the extermination of JUnit3. Most of the
work was global searce/replace using regular expression,
followed by numerous invocarions of quick-fix and organize
imports and verification that we had the same number of
tests before and after.

- Annotations were introduced.
- All references to JUnit3 classes removed
- Half-good replacement for getting the test name. This was
  needed to make the TestRngs work. The initialization of
  TestRngs was also made lazily since we can not longer find
  out the test name in runtime in the @Before methods.
- Renamed test classes to end with Test, with the exception
  of TestTranslateBundle, which fails from Maven
- Moved JGitTestUtil to the junit support bundle

Change-Id: Iddcd3da6ca927a7be773a9c63ebf8bb2147e2d13
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

Introduce a http test bundle to make this functionality available for
EGit tests. A simple http server class is provided. The jetty version
was updated to a version that is also available via p2 (needed in EGit
UI tests).

Change-Id: I13bfc4c6c47e27d8f97d3e9752347d6d23e553d4
Signed-off-by: Jens Baumgart <jens.baumgart@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>

Ensure the background Jetty threads have been able to write the
request log record before the JUnit thread tries to read the set
of requests back.  This wait is necessary because the JUnit thread
may be able to continue as soon as Jetty has finished writing
the response onto the socket, and hasn't necessarily finished the
post-response logging activity.

By using a semaphore with a fixed number of resources, and using
one resource per request, but all of them when we want to read the
log, we implement a simple lock that requires there be no active
requests when we want to get the log from the JUnit thread.

Change-Id: I499e1c96418557185d0e19ba8befe892f26ce7e4
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>

No Eclipse support for this project is provided, because the
Jetty project does not publish a complete P2 repository.

Change-Id: Ic5fe2e79bb216e36920fd4a70ec15dd6ccfd1468
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>