blame: Compute the origin of lines in a result file
BlameGenerator digs through history and discovers the origin of each
line of some result file. BlameResult consumes the stream of regions
created by the generator and lays them out in a table for applications
to display alongside of source lines.
Applications may optionally push in the working tree copy of a file
using the push(String, byte[]) method, allowing the application to
receive accurate line annotations for the working tree version. Lines
that are uncommitted (difference between HEAD and working tree) will
show up with the description given by the application as the author,
or "Not Committed Yet" as a default string.
Applications may also run the BlameGenerator in reverse mode using the
reverse(AnyObjectId, AnyObjectId) method instead of push(). When
running in the reverse mode the generator annotates lines by the
commit they are removed in, rather than the commit they were added in.
This allows a user to discover where a line disappeared from when they
are looking at an older revision in the repository. For example:
blame --reverse 16e810b2..master -L 1080, org.eclipse.jgit.test/tst/org/eclipse/jgit/storage/file/RefDirectoryTest.java
( 1080) }
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1081)
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1082) /**
2302a6d3 (Christian Halstrick 2011-05-20 11:18:20 +0200 1083) * Kick the timestamp of a local file.
Above we learn that line 1080 (a closing curly brace of the prior
method) still exists in branch master, but the Javadoc comment below
it has been removed by Christian Halstrick on May 20th as part of
commit 2302a6d3. This result differs considerably from that of C
Git's blame --reverse feature. JGit tells the reader which commit
performed the delete, while C Git tells the reader the last commit
that still contained the line, leaving it an exercise to the reader
to discover the descendant that performed the removal.
This is still only a basic implementation. Quite notably it is
missing support for the smart block copy/move detection that the C
implementation of `git blame` is well known for. Despite being
incremental, the BlameGenerator can only be run once. After the
generator runs it cannot be reused. A better implementation would
support applications browsing through history efficiently.
In regards to CQ 5110, only a little of the original code survives.
CQ: 5110
Bug: 306161
Change-Id: I84b8ea4838bb7d25f4fcdd540547884704661b8f
Signed-off-by: Kevin Sawicki <kevin@github.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Require the hamcrest packaging that comes with Eclipse
The other one gets installed with SWTBot, but you do not
need it if you do not hack EGit. Using import-package
instead of require-bundle fixes the dependency. Actually
we do not need hamcrest at this time, but JUnit wants it.
Change-Id: I59873618f86d02e8439d40c1f322ea8e5c4fe3fc
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Eclipse has some problem re-running single JUnit tests if
the tests are in Junit 3 format, but the JUnit 4 launcher
is used. This was quite unnecessary and the move was not
completed. We still have no JUnit4 test.
This completes the extermination of JUnit3. Most of the
work was global searce/replace using regular expression,
followed by numerous invocarions of quick-fix and organize
imports and verification that we had the same number of
tests before and after.
- Annotations were introduced.
- All references to JUnit3 classes removed
- Half-good replacement for getting the test name. This was
needed to make the TestRngs work. The initialization of
TestRngs was also made lazily since we can not longer find
out the test name in runtime in the @Before methods.
- Renamed test classes to end with Test, with the exception
of TestTranslateBundle, which fails from Maven
- Moved JGitTestUtil to the junit support bundle
Change-Id: Iddcd3da6ca927a7be773a9c63ebf8bb2147e2d13
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some enablement was done earlier, but we need to add the org.junit package
and hamcrest to make it work.
junit.textui removed, probably a mistake at some time in the past.
Change-Id: I6922a2f40eb0c077a8ade5ed073ecf0e90425544
The NoteMap makes it easy to read a small notes tree as created by
the `git notes` command in C Git. To make the initial implementation
simple a notes tree is read recursively into a map in memory.
This is reasonable if the application will need to access all notes,
or if there are less than 256 notes in the tree, but doesn't behave
well when the number of notes exceeds 256 and the application
doesn't need to access all of them.
We can later add support for lazily loading different subpaths,
thus fixing the large note tree problem described above.
Currently the implementation only supports reading. Writing notes
is more complex because trees need to be expanded or collapsed at
the exact 256 entry cut-off in order to retain the same tree SHA-1
that C Git would use for the same content. It also needs to retain
non-note tree entries such as ".gitignore" or ".gitattribute" files
that might randomly appear within a notes tree. We can also add
writing support later.
Change-Id: I93704bd84ebf650d51de34da3f1577ef0f7a9144
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Create a new 'org.eclipse.jgit.api.errors' package to contain
exceptions related to using the Git porcelain API.
Change-Id: Iac1781bd74fbd520dffac9d347616c3334994470
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
We should use JUnit4 for tests. This patch updates
the MANIFEST.MF and respective launch configurations.
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Configuration change events were not being triggered, now they are
forwarded from the FileConfig up to the Repository's listeners.
Change-Id: Ida94a59f5a2b7fa8ae0126e33c13343275483ee5
Signed-off-by: Mathias Kinzler <mathias.kinzler@sap.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This patch adds ignore compatibility to jgit. It encompasses
exclude files as well as .gitignore. Uses TreeWalk and
FileTreeIterator to find nodes and parses .gitignore
files when required. The patch includes a simple cache that
can be used to save results and avoid excessive gitignore
parsing.
CQ: 4302
Bug: 303925
Change-Id: Iebd7e5bb534accca4bf00d25bbc1f561d7cad11b
Signed-off-by: Chris Aniszczyk <caniszczyk@gmail.com>
Signed-off-by: Stefan Lay <stefan.lay@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Similar to what we did with the file code, move the pack writer
into its own package so the related classes and their package
private methods are hidden from the rest of the library.
Change-Id: Ic1b5c7c8c8d266e90c910d8d68dfc8e93586854f
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Move FileRepository to storage.file.FileRepository
This move isolates all of the local file specific implementation code
into a single package, where their package-private methods and support
classes are properly hidden away from the rest of the core library.
Because of the sheer number of files impacted, I have limited this
change to only the renames and the updated imports.
Change-Id: Icca4884e1a418f83f8b617d0c4c78b73d8a4bd17
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Created wrong tags for 0.8.3 hence creating another version.
Change-Id: I4e00bbcffe1cf872e2d7e3f3d88d068701fb5330
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The strings are externalized into the root resource bundles.
The resource bundles are stored under the new "resources" source
folder to get proper maven build.
Strings from tests are, in general, not externalized. Only in
cases where it was necessary to make the test pass the strings
were externalized. This was typically necessary in cases where
e.getMessage() was used in assert and the exception message was
slightly changed due to reuse of the externalized strings.
Change-Id: Ic0f29c80b9a54fcec8320d8539a3e112852a1f7b
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Add builder-style API to jgit and Commit & Log cmd
Added a new package org.eclipse.jgit.api and a builder-style API for
jgit. Added also the first implementation for two git commands: Commit
and Log.
This API is intended to be used by external components when
functionalities of the standard git commands are required. It will also
help to ease writing JGit tests.
For internal usages this API may often not be optimal because the git
commands are doing much more than required or they expect parameters of
an unappropriate type.
Change-Id: I71ac4839ab9d2f848307eba9252090c586b4146b
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The JSch bundle in Eclipse 3.4 does not export its packages with
version numbers. Use Require-Bundle on version 0.1.37 that comes
with Eclipse 3.4
There is no 0.1.37 in the maven repositories so the pom still refers
to 0.1.41 so the build can get the compile time dependencies right.
Bug: 308031
CQ: 3904 jsch Version: 0.1.37 (using Orbit CQ2014)
Change-Id: I12eba86bfbe584560c213882ebba58bf1f9fa0c1
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Since the API is changing relative to 0.7.0, we'll call our next
release 0.8.1. But until that gets released, builds from master
will be 0.8.0.qualifier.
Change-Id: I921e984f51ce498610c09e0db21be72a533fee88
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The support for NLS relies on java.util API to load a standard
ResourceBundle and then uses java reflection API to inject localized
strings into public String fields of the corresponding instance
of TranslationBundle.
Locale setting is supported per thread to enable concurrent threads
to use different locales. This is useful when JGit runs in a server
context where (error) messages might need to differ per-request to
suit the user's preference.
Change-Id: Ie0e63a0d7bb74eaad495dbe8248595d8a3a76883
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
Cleanup OSGi Import-Package specifications to use versions
Actually set the range of versions we are willing to accept for
each package we import, lest we import something in the future
that isn't compatible with our needs.
Change-Id: I25dbbb9eaabe852631b677e0c608792b3ed97532
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Partial revert "Switch build to Apache Felix maven-bundle-plugin"
This restores the ability to build using just Eclipse without
strange procedures, extra plugins and it is again possible to
work on both JGit and EGit in the same Eclipse workspace with
ease.
Change-Id: I0af08127d507fbce186f428f1cdeff280f0ddcda
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Tycho isn't production ready for projects like JGit to be using as
their primary build driver. Some problems we ran into with Tycho
0.6.0 that are preventing us from using it are:
* Tycho can't run offline
The P2 artifact resolver cannot perform its work offline. If the
build system has no network connection, it cannot compile a
project through Tycho. This is insane for a distributed version
control system where developers are used to being offline during
development and local testing.
* Magic state in ~/.m2/repository/.meta/p2-metadata.properties
Earlier iterations of this patch tried to use a hybrid build,
where Tycho was only used for the Eclipse specific feature and P2
update site, and maven-bundle-plugin was used for the other code.
This build seemed to work, but only due to magic Tycho specific
state held in my local home directory. This means builds are not
consistently repeatable across systems, and lead me to believe
I had a valid build, when in fact I did not.
* Manifest-first build produces incomplete POMs
The POM created by the manifest-first build format does not
contain the dependency chain, leading a downstream consumer to
not import the runtime dependencies necessary to execute the
bundle it has imported. In JGit's case, this means JSch isn't
included in our dependency chain.
* Manifest-first build produces POMs unreadable by Maven 2.x
JGit has existing application consumers who are relying on
Maven 2.x builds. Forcing them to step up to an alpha release
of Maven 3 is simply unacceptable.
* OSGi bundle export data management is tedious
Editing each of our pom.xml files to mark a new release is
difficult enough as it is. Editing every MANIFEST.MF file to
list our exported packages and their current version number is
something a machine should do, not a human. Yet the Tycho OSGi
way unfortunately demands that a human do this work.
* OSGi bundle import data management is tedious
There isn't a way in the MANIFEST.MF file format to reuse the
same version tags across all of our imports, but we want to have
a consistent view of our dependencies when we compile JGit.
After wasting more than 2 full days trying to get Tycho to work,
I've decided its a lost cause right now. We need to be chasing down
bugs and critical features, not trying to bridge the gap between
the stable Maven repository format and the undocumented P2 format
used only by Eclipse.
So, switch the build to use Apache Felix's maven-bundle-plugin.
This is the same plugin Jetty uses to produce their OSGi bundle
manifests, and is the same plugin used by the Apache Felix project,
which is an open-source OSGi runtime. It has a reasonable number
of folks using it for production builds, and is running on top of
the stable Maven 2.x code base.
With this switch we get automatically generated MANIFEST.MF files
based on reasonably sane default rules, which reduces the amount
of things we have to maintain by hand. When necessary, we can add
a few lines of XML to our POMs to tweak the output.
Our build artifacts are still fully compatible with Maven 2.x, so
any downstream consumers are still able to use our build products,
without stepping up to Maven 3.x. Our artifacts are also valid as
OSGi bundles, provided they are organized on disk into a repository
that the runtime can read.
With maven-bundle-plugin the build runs offline, as much as Maven
2.x is able to run offline anyway, so we're able to return to a
distributed development environment again.
By generating MANIFEST.MF at the top level of each project (and
therefore outside of the target directory), we're still compatible
with Eclipse's PDE tooling. Our projects can be imported as standard
Maven projects using the m2eclipse plugin, but the PDE will think
they are vaild plugins and make them available for plugin builds,
or while debugging another workbench.
This change also completely removes Tycho from the build.
Unfortunately, Tycho 0.6.0's pom-first dependency resolver is broken
when resolving a pom-first plugin bundle through a manifest-first
feature package, so bundle org.eclipse.jgit can't be resolved,
even though it might actually exist in the local Maven repository.
Rather than fight with Tycho any further, I'm just declaring it
plugina-non-grata and ripping it out of the build.
Since there are very few tools to build a P2 format repository, and
no documentation on how to create one without running the Eclipse
UI manually by poking buttons, I'm declaring that we are not going
to produce a P2 update site from our automated builds.
Change-Id: If7938a86fb0cc8e25099028d832dbd38110b9124
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Matthias Sohn
Shawn O. Pearce
Ketan Padegaonkar
Robin Rosenberg
Chris Aniszczyk
Mathias Kinzler
Charley Wang
Sasa Zivkov
Christian Halstrick