Revert "RevWalk: stop mixing lines of history in topo sort"
This reverts commit b5e764abd2.
PlotWalk uses the TopoSortGenerator, which is causing problems for EGit users
who rely on the emission of commits being somewhat based on date as in the
previous topo-sort algorithm.
Bug: 560529
Change-Id: I3dbd3598a7aeb960de3fc39352699b4f11a8c226
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
RevWalk: stop mixing lines of history in topo sort
The topological sort algorithm in TopoSortGenerator for RevWalk may mix
multiple lines of history, producing results that differ from C git's
git log whose man page states: "Show no parents before all of its
children are shown, and avoid showing commits on multiple lines of
history intermixed." Lines of history are mixed because
TopoSortGenerator merely delays a commit until all of its children have
been produced; it does not immediately produce a commit after its last
child has been produced.
Therefore, when the last child of a commit has been produced, unpop the
commit so that it will be returned upon the subsequent call to next() in
TopoSortGenerator. To avoid producing duplicates, mark commits that
have not yet been produced as TOPO_QUEUED so that when a commit is
popped, it is produced if and only if TOPO_QUEUED is set.
To support nesting with other generators that may produce the same
commit multiple times like DepthGenerator (for example, StartGenerator
does this), do not increment parent inDegree for the same child commit
more than once.
Modify tests that assert that TopoSortGenerator mixes lines of commit
history.
Change-Id: I4ee03c7a8e5265d61230b2a01ae3858745b2432b
Signed-off-by: Alex Spradlin <alexaspradlin@google.com>
As reported by Error Prone:
An inner class should be static unless it references members of its
enclosing class. An inner class that is made non-static unnecessarily
uses more memory and does not make the intent of the class clear.
See https://errorprone.info/bugpattern/ClassCanBeStatic
Change-Id: Ib99d120532630dba63cf400cc1c61c318286fc41
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
(cherry picked from commit ee40efcea4)
As reported by Error Prone:
An inner class should be static unless it references members of its
enclosing class. An inner class that is made non-static unnecessarily
uses more memory and does not make the intent of the class clear.
See https://errorprone.info/bugpattern/ClassCanBeStatic
Change-Id: Ib99d120532630dba63cf400cc1c61c318286fc41
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Enable and fix warnings about redundant specification of type arguments
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Revert "CommitBuilder should check for duplicate parents"
This reverts commit 6bc48cdc62.
Until git v1.7.10.2~29^2~1 (builtin/merge.c: reduce parents early,
2012-04-17), C git merge would make merge commits with duplicate parents
when asked to with a series of commands like the following:
git checkout origin/master
git merge --no-ff origin/master
Nowadays "git merge" removes redundant parents more aggressively
(whenever one parent is an ancestor of another and not just when
duplicates exist) but merges with duplicate parents are still permitted
and can be created with git fast-import or git commit-tree and history
viewers need to be able to cope with them.
CommitBuilder is an interface analagous to commit-tree, so it should
allow duplicate parents. (That said, an option to automatically remove
redundant parents would be useful.)
Reported-by: Dave Borowitz <dborowitz@google.com>
Change-Id: Ia682238397eb1de8541802210fa875fdd50f62f0
Signed-off-by: Jonathan Nieder <jrn@google.com>
When setting the parents of a commit with setParentIds() or
addParentId() it should be checked that we don't have duplicate parents.
An IllegalArgumentException should be thrown in this case.
Change-Id: I9fa9f31149b7732071b304bca232f037146de454
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
The aim of this change is to place all commits of a branch on the same
lane and commits of other (side) branches on different lanes.
The algorithm treats first parents of a commit specially by placing them
on the same lane as the commit itself. When a commit is the first parent
of multiple children it could be placed on any of these children's
lanes. In this case it is placed on the longest child lane, as this is
usually the lane of the branch the commit actually was made on.
Other (non-first) parents are placed on new lanes. This creates a layout
that should make it easier to see branches and merges and follow linear
branch histories.
This differs from the previous approach, which sometimes plotted the
commits of a side branch on the same lane as the base branch commits and
further commits on the base branch appeared on a different lane.
This made the base branch appear as if it was the side branch and
the side branch appears to be the base branch.
In addition to lane assignment, also the plotting code changed to start
drawing a branch lane from the commit where it forks out. Previously it
started only when the first commit on the branch appeared.
Active lanes are continued with every commit that is processed.
Previously lanes were only continued when the next commit on the lane
was encountered. This could produce (temporarily) dangling commits if
the next commit on the lane was not processed yet.
CQ: 8299
Bug: 419359
Bug: 434945
Change-Id: Ibe547aa24b5948ae264f7d0f56a492a4ef335608
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When more than one lane is drawn, some commits are vertically misaligned
(off by two pixels). This change fixes the alignment.
Bug: 426047
Change-Id: Icbe7ce9f5a6b281b2aaab66e4d76dfc1010b2fb5
Signed-off-by: Konrad Kügler <swamblumat-eclipsebugs@yahoo.de>
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Attempt to fix graph layout when new heads are introduced
Sometime the new commit is no allocated onto a new lane leading to
the commit being drawn on the wrong branch and something that looks
like a merge.
The drawback is that this also changes existing valid graphs.
Bug: 368927
Change-Id: Ic8a8247c8a53be802c1be83850ed766b902ca646
JGit allows to create commits which have duplicate parents: e.g. a
commit X has first parent Y and second parent Y. Such commits are not
handled correctly by PlotCommit leading to wrong display of the history
in EGit. In such cases there is a never ending passing line drawn beside
all commits younger than the commit with duplicate parents. This commit
fixes this by explicitly checking for duplicate parents.
In a different commit we should fix JGit not to create commits with
duplicate parents. I think native git also doesn't allow such commits,
although history display in native git (gitk, git log --graph) is not
damaged by such commits.
Change-Id: Ie3019ef613a507023958bea27b1badc3b8950279
Eclipse has some problem re-running single JUnit tests if
the tests are in Junit 3 format, but the JUnit 4 launcher
is used. This was quite unnecessary and the move was not
completed. We still have no JUnit4 test.
This completes the extermination of JUnit3. Most of the
work was global searce/replace using regular expression,
followed by numerous invocarions of quick-fix and organize
imports and verification that we had the same number of
tests before and after.
- Annotations were introduced.
- All references to JUnit3 classes removed
- Half-good replacement for getting the test name. This was
needed to make the TestRngs work. The initialization of
TestRngs was also made lazily since we can not longer find
out the test name in runtime in the @Before methods.
- Renamed test classes to end with Test, with the exception
of TestTranslateBundle, which fails from Maven
- Moved JGitTestUtil to the junit support bundle
Change-Id: Iddcd3da6ca927a7be773a9c63ebf8bb2147e2d13
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Fix PlotCommitList to set lanes on child-less commits
In PlotCommitList.enter() commits are positioned on lanes for visual
presentation. This implementation was buggy: commits without
children (often the starting points for the RevWalk) are not positioned
on separate lanes.
The problem was that when handling commits with multiple children
(that's where branches fork out) it was not handled that some of the
children may not have been positioned on a lane yet. I fixed that and
added a number of tests which specifically test the layout of commits
on lanes.
Bug: 300282
Bug: 320263
Change-Id: I267b97ecccb5251cec54cec90207e075ab50503e
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>