The submodule.name.fetchRecurseSubmodules value was being read from the
configuration of the submodule, but it should be read from the config
of the parent repository.
Also, the fetch.recurseSubmodules value from the parent repository's
configuration was not being considered at all.
Fix both of these and add tests. Now the precedence of the recurse mode
is determined as follows:
1. Value passed to the API
2. Value configured in submodule.name.fetchRecurseSubmodules
3. Value configured in fetch.recurseSubmodules
4. Default to "on demand"
Change-Id: Ic23b7c40b5f39135fb3fd754c597dd4bcc94240c
Extend FetchCommand to expose a new method, setRecurseSubmodules(mode),
which allows to set the mode to ON, OFF or ON_DEMAND.
After fetching a repository, its submodules are recursively fetched:
- When the mode is YES, submodules are always fetched.
- When the mode is NO, submodules are not fetched.
- When the mode is ON_DEMAND, submodules are only fetched when the
parent repository receives an update of the submodule and the new
revision is not already in the submodule.
The mode is determined in the following order of precedence:
- Value specified in the API call using setRecurseSubmodules.
- Value specified in the repository's config under the key
submodule.name.fetchRecurseSubmodules
- Defaults to ON_DEMAND if neither of the previous is set.
Extend FetchResult to recursively include results for submodules, as
a map of the submodule path to an instance of FetchResult.
Test setup is based on testCloneRepositoryWithNestedSubmodules.
Change-Id: Ibc841683763307cb76e78e142e0da5b11b1add2a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This operation was added recently with the goal to provide some
way to auto-correct invalid user input, or to provide a correction
suggestion to the user -- EGit uses it now that way. But the initial
implementation was very restrictive; it removed all non-ASCII
characters and even slashes.
Understandably end users were not happy with that. Git has no such
restriction to ASCII-only; nor does JGit. Branch names should be
meaningful to the end user, and if a user-supplied branch name is
invalid for technical reasons, a "normalized" name should still
be meaningful to the user.
Rewrite to attempt a minimal fix such that the result will pass
isValidRefName.
* Replace all Unicode whitespace by underscore.
* Replace troublesome special characters by dash.
* Collapse sequences of underscores, dots, and dashes.
* Remove underscores, dots, and dashes following slashes, and
collapse sequences of slashes.
* Strip leading and trailing sequences of slashes, dots, dashes,
and underscores.
* Avoid the ".lock" extension.
* Avoid the Windows reserved device names.
* If input name is null return an empty String so callers don't need to
check for null.
This still allows branch names with single slashes as separators
between components, avoids some pitfalls that isValidRefName() tests
for, and leaves other character untouched and thus allows non-ASCII
branch names.
Also move the function from the bottom of the file up to where
isValidRefName is implemented.
Bug: 512508
Change-Id: Ia0576d9b2489162208c05e51c6d54e9f0c88c3a7
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Update SHA1 class to include a Java port of sha1dc[1]'s ubc_check,
which can detect the attack pattern used by the SHAttered[2] authors.
Given the shattered example files that have the same SHA-1, this
modified implementation can identify there is risk of collision given
only one file in the pair:
$ jgit ...
[main] WARN org.eclipse.jgit.util.sha1.SHA1 - SHA-1 collision 38762cf7f55934b34d179ae6a4c80cadccbb7f0a
When JGit detects probability of a collision the SHA1 class now warns
on the logger, reporting the object's SHA-1 hash, and then throws a
Sha1CollisionException to the caller.
From the paper[3] by Marc Stevens, the probability of a false positive
identification of a collision is about 14 * 2^(-160), sufficiently low
enough for any detected collision to likely be a real collision.
git-core[4] may adopt sha1dc before the system migrates to an entirely
new hash function. This commit enables JGit to remain compatible with
that move to sha1dc, and help protect users by warning if similar
attacks as SHAttered are identified.
Performance declined about 8% (detection off), now:
MessageDigest 238.41 MiB/s
MessageDigest 244.52 MiB/s
MessageDigest 244.06 MiB/s
MessageDigest 242.58 MiB/s
SHA1 216.77 MiB/s (was ~240.83 MiB/s)
SHA1 220.98 MiB/s
SHA1 221.76 MiB/s
SHA1 221.34 MiB/s
This decline in throughput is attributed to the step loop unrolling in
compress(), which was necessary to easily fit the UbcCheck logic into
the hash function. Using helper functions s1-s4 reduces the code
explosion, providing acceptable throughput.
With detection enabled (default):
SHA1 detectCollision 180.12 MiB/s
SHA1 detectCollision 181.59 MiB/s
SHA1 detectCollision 181.64 MiB/s
SHA1 detectCollision 182.24 MiB/s
sha1dc (native C) ~206.28 MiB/s
sha1dc (native C) ~204.47 MiB/s
sha1dc (native C) ~203.74 MiB/s
Average time across 100,000 calls to hash 4100 bytes (such as a commit
or tree) for the various algorithms available to JGit also shows SHA1
is slower than MessageDigest, but by an acceptable margin:
MessageDigest 17 usec
SHA1 18 usec
SHA1 detectCollision 22 usec
Time to index-pack for git.git (217982 objects, 69 MiB) has increased:
MessageDigest SHA1 w/ detectCollision
------------- -----------------------
20.12s 25.25s
19.87s 25.48s
20.04s 25.26s
avg 20.01s 25.33s +26%
Being implemented in Java with these additional safety checks is
clearly a penalty, but throughput is still acceptable given the
increased security against object name collisions.
[1] https://github.com/cr-marcstevens/sha1collisiondetection
[2] https://shattered.it/
[3] https://marc-stevens.nl/research/papers/C13-S.pdf
[4] https://public-inbox.org/git/20170223230621.43anex65ndoqbgnf@sigill.intra.peff.net/
Change-Id: I9fe4c6d8fc5e5a661af72cd3246c9e67b1b9fee6
The TreeWalk filtering classes need to support the three different
meanings of the return value the path comparison generates.
A new path comparison method (isPathMatch) is created with
three distinct return values (isPathPrefix use value '0' to
encode two of these) which will makes it possible for the logical
operators (especially NOT) to aggregate a correct verdict.
A filter like: AND(Path("path"), NOT(Path("path/to/other")))
Should filter out 'path/to/other/file', but not 'path/to/my/file'.
The path-limiting feature when testing path/to/my/file, would
result to run test for the following paths:
path
path/to
path/to/my
path/to/my/file
isPathPrefix('path/to/other') will return '0' for the first two
and since there is no way for NOT to distinguish between an exact
match and a match indicating that the tested path is a 'parent',
it will incorrectly return false and thus remove everything below
'path' immediately.
isPathMatch has a distinguished value for 'parent' matches that
will be preserved through the logic operators and should not
cause an over-eager removal of paths.
The functionality of isPathPrefix is required by other parts
and is untouched.
Unit tests are included to ensure that the logical functionality
is correct and can be preserved.
Change-Id: Ice2ca9406f09f1b179569e99b86a0e5d77baa20d
Signed-off-by: Magnus Vigerlöf <magnus.vigerlof@gmail.com>
Allow SHA1 instances to be reused to compute another hash value, and
resume caching them in ObjectInserter and PackParser. This shaves a
small amount of running time off parsing git.git's pack file:
before after
------ ------
25.25s 25.55s
25.48s 25.06s
25.26s 24.94s
Almost noise (small difference), but recycling the instances reduces
some stress on the memory allocator finding two 80 word message block
arrays needed for hashing and collision detection.
Change-Id: I4af88a720e81460293bc5c5d1d3db1a831e7e228
Generate names for objects using only the pure Java SHA1
implementation, but continue using MessageDigest in tests.
This opens the possibility of changing the hashing function
to incorporate additional safety measures, such as those
used in sha1dc[1].
Since MessageDigest has higher throughput, continue using
MessageDigest for computing pack, idx and DirCache trailers.
These are less likely to be sensitive to SHAttered[2] types
of attacks, as Git uses them to detect random bit flips
during transfer, and not for content identity.
[1] https://github.com/cr-marcstevens/sha1collisiondetection
[2] https://shattered.it/
Change-Id: If6da98334201f7f20cb916e46f782c45f373784e
This implementation is derived straight from the description written
in RFC 3174. On Mac OS X with Java 1.8.0_91 it offers similar
throughput as MessageDigest SHA-1:
system 239.75 MiB/s
system 244.71 MiB/s
system 245.00 MiB/s
system 244.92 MiB/s
sha1 234.08 MiB/s
sha1 244.50 MiB/s
sha1 242.99 MiB/s
sha1 241.73 MiB/s
This is the fastest implementation I could come up with. Common SHA-1
implementation tricks such as unrolling loops creates a method too
large for the JIT to effectively optimize, resulting in lower overall
hashing throughput. Using a preprocessor to perform the register
renaming of A-E also didn't help, as again the method was too large
for the JIT to effectively optimize.
Fortunately the fastest version is a naive, straight-forward
implementation very close to the description in RFC 3174.
Change-Id: I228b05c4a294ca2ad51386cf0e47978c68e1aa42
Since the introduction of generic type parameter inference in Java 7,
it's not necessary to explicitly specify the type of generic parameters.
Enable the warning in Eclipse, and fix all occurrences.
Change-Id: I9158caf1beca5e4980b6240ac401f3868520aad0
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
In 0bff481d45 to accurately use the two
limits it was necessary to move the LimitedInputStream out of the
PacketLineIn and further down to the PackParser. Unfortuantely this
didn't survive review, as a buggy test failed and the "fix" was to
drop this part of the code.
The maxPackSizeLimit should apply to the pack stream, not the pkt-line
framing used to send commands to control the ReceivePack instance. The
commands are controlled using a different limit. The failing test allowed
too many bytes in the pack and was only failing because it was including
the command framing. The correct fix for the test was simply to drop the
limit lower, to more closely match the actual pack size.
Change-Id: I47d3885b9d7d527e153df7ac9c62fc2865ceecf4
Set missingOverrideAnnotation=warning in Eclipse compiler preferences
which enables the warning:
The method <method> of type <type> should be tagged with @Override
since it actually overrides a superclass method
Justification for this warning is described in:
http://stackoverflow.com/a/94411/381622
Enabling this causes in excess of 1000 warnings across the entire
code-base. They are very easy to fix automatically with Eclipse's
"Quick Fix" tool.
Fix all of them except 2 which cause compilation failure when the
project is built with mvn; add TODO comments on those for further
investigation.
Change-Id: I5772061041fd361fe93137fd8b0ad356e748a29c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Add a new method setTagOpt which sets the annotated tag behavior during
fetch. Pass the option to the fetch command.
No explicit tests are added; the fetch with tags functionality is already
covered by the tests of the fetch command.
Change-Id: I131e1f68d8fcced178d8fa48abf7ffab17f8e173
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Archived zip files for a same commit have different MD5 hash because
mdate and mdate in the header of zip entries are not specified. In
this case, Commons Compress sets an archived time.
In the original git implementation, it's set a commit time:
e2b2d6a172/archive.c (L378)
By this fix, archive command sets the commit time to ZipArchiveEntry
when RevCommit is given as an archiving target.
Change-Id: I30dd8710e910cdf42d57742f8709e9803930a123
Signed-off-by: Naoki Takezoe <takezoe@gmail.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the pruneexpire config is set to "now", then any unreferenced loose
objects are immediately eligible for gc. So there is no need to
actually write the loose objects.
Users who run hosting services which sometimes accept large, entirely
garbage packs might set the following configurations:
gc.pruneExpire = now
gc.prunePackExpire = 2.weeks
Then garbage objects will be kept around in packs, but after two weeks
the packs themselves will get deleted.
For client-side users of jgit, the default settings will loosen
garbage objects, and, after an hour, delete the old packs in which
they resided.
Change-Id: I8f686ac60b40181b1ee92ac6c313c3f33b55c44c
Signed-off-by: David Turner <dturner@twosigma.com>
Without this, using bazel 0.4.4 to build fails:
ERROR: jgit/org.eclipse.jgit/BUILD:29:1: Java compilation in rule '//org.eclipse.jgit:insecure_cipher_factory' failed: Worker process sent response with exit code: 1.
jgit/src/org/eclipse/jgit/transport/InsecureCipherFactory.java:63: error: [InsecureCryptoUsage] Insecure usage of a crypto API: the transformation is not a compile-time constant expression.
return Cipher.getInstance(algo);
^
(see http://errorprone.info/bugpattern/InsecureCryptoUsage)
Change-Id: I7f9a3a5117e42cb68544674f5312df0368aa3674
At beginning of the OBJECT_SCAN loop, it will first check if the object
exists in the last pack, however, it forgot to avoid garbage pack for
the first iteration.
Change-Id: I8a99c0f439218d19c49cd4dae891b8cc4a57099d
Signed-off-by: Zhen Chen <czhen@google.com>
There are multiple places in DfsReader to skip garbage pack if both of
the following conditions satisfied:
* AvoidUnreachable flag is set
* The pack is a garabge pack
Refactor them into a shared private method.
Change-Id: I67d6bb601db55f904437c807c6a3c36f0a723265
Signed-off-by: Zhen Chen <czhen@google.com>
Place a configurable upper bound on the amount of command data
received from clients during `git push`. The limit is applied to the
encoded wire protocol format, not the JGit in-memory representation.
This allows clients to flexibly use the limit; shorter reference names
allow for more commands, longer reference names permit fewer commands
per batch.
Based on data gathered from many repositories at $DAY_JOB, the average
reference name is well under 200 bytes when encoded in UTF-8 (the wire
encoding). The new 3 MiB default receive.maxCommandBytes allows about
11,155 references in a single `git push` invocation. A Gerrit Code
Review system with six-digit change numbers could still encode 29,399
references in the 3 MiB maxCommandBytes limit.
Change-Id: I84317d396d25ab1b46820e43ae2b73943646032c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The renameDetector member returned by this method will be null when
following file renames has been disabled by previously calling:
setFollowFileRenames(false).
Annotate it as @Nullable and update the Javadoc to explicitly
document the null return.
Change-Id: I9bdf443a64cf3c45352d3ab023051a2e11f7426d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
When rebasing, force-pushing has a race condition: someone else might
have pushed a commit since the one you just rewrote. The force-with-lease
option prevents this by ensuring that the ref's old value is the one
that you expected.
Change-Id: I97ca9f8395396c76332bdd07c486e60549ca4401
Signed-off-by: David Turner <dturner@twosigma.com>
In a DFS repository the DfsGarbageCollector will typically attempt
delta compression while creating the three main pack files: GC,
GC_REST and GC_TXN. Include all of these in the wasDeltaAttempted()
decision so that future packers can bypass delta compression of
non-delta objects.
Change-Id: Ic2330c69fab0c494b920b4df0a290f3c2e1a03d7
In 8ac65d33ed PackWriter changed its
behavior to always prefer the last object representation presented
to it by the ObjectReuseAsIs implementation. This was a fix to avoid
delta chain cycles.
Unfortunately it can lead to suboptimal compression when concurrent
GCs are run on the same repository. One case is automatic GC running
(with default settings) in parallel to a manual GC that has disabled
delta reuse in order to generate new smaller deltas for the entire
history of the repository.
Running GC with no-reuse generally requires more CPU time, which
also translates to a longer running time. This can lead to a race
where the automatic GC completes before the no-reuse GC, leaving
the repository in a state such as:
no-reuse GC: size 1 GiB, mtime = 18:45
auto GC: size 8 GiB, mtime = 17:30
With the default sort ordering, the smaller no-reuse GC pack is
sorted earlier in the pack list, due to its more recent mtime.
During object reuse in a future GC, these smaller representations
are considered first by PackWriter, but are all discarded when the
auto GC file from 17:30 is examined second (due to its older mtime).
Work around this in two ways.
Well formed DFS repositories should have at most 1 GC pack. If
2 or more GC packs exist, break the sorting tie by selecting the
smaller file earlier in the pack list. This allows all normal read
code paths to favor the smaller file, which places less pressure
on the DfsBlockCache. If any GC race happens, readers serving clone
requests will prefer the file that is smaller.
During object reuse, flip this ordering so that the smaller file is
last. This allows PackWriter to see smaller deltas last, replacing
larger representations that were previously considered from other
pack files.
Change-Id: I0b7dc8bb9711c82abd6bd16643f518cfccc6d31a
Delta search was discarding discovered deltas if an object appeared
near a type boundary in the delta search window. This has caused JGit
to produce larger pack files than other implementations of the packing
algorithm.
Delta search works by pushing prior objects into a search window, an
ordered list of objects to attempt to delta compress the next object
against. (The window size is bounded, avoiding O(N^2) behavior.)
For implementation reasons multiple object types can appear in the
input list, and the window. PackWriter commonly passes both trees and
blobs in the input list handed to the DeltaWindow algorithm. The pack
file format requires an object to only delta compress against the same
type, so the DeltaWindow algorithm must stop doing comparisions if a
blob would be compared to a tree.
Because the input list is sorted by object type and the window is
recently considered prior objects, once a wrong type is discovered in
the window the search algorithm stops and uses the current result.
Unfortunately the termination condition was discarding any found
delta by setting deltaBase and deltaBuf to null when it was trying
to break the window search.
When this bug occurs, the state of the DeltaWindow looks like this:
current
|
\ /
input list: tree0 tree1 blob1 blob2
window: blob1 tree1 tree0
/ \
|
res.prev
As the loop iterates to the right across the window, it first finds
that blob1 is a suitable delta base for blob2, and temporarily holds
this in the bestDelta/deltaBuf fields. It then considers tree1, but
tree1 has the wrong type (blob != tree), so the window loop must give
up and fall through the remaining code.
Moving the condition up and discarding the window contents allows
the bestDelta/deltaBuf to be kept, letting the final file delta
compress blob1 against blob0.
The impact of this bug (and its fix) on real world repositories is
likely minimal. The boundary from blob to tree happens approximately
once in the search, as the input list is sorted by type. Only the
first window size worth of blobs (e.g. 10 or 250) were failing to
produce a delta in the final file.
This bug fix does produce significantly different results for small
test repositories created in the unit test suite, such as when a pack
may contains 6 objects (2 commits, 2 trees, 2 blobs). Packing test
cases can now better sample different output pack file sizes depending
on delta compression and object reuse flags in PackConfig.
Change-Id: Ibec09398d0305d4dbc0c66fce1daaf38eb71148f
Disabling the garbage pack coalescing when garbageTtl > 0 can result in
lot of garbage packs if they are created within the garbageTtl time.
To avoid a large number of garbage packs, re-introducing garbage pack
coalescing for the packs that are created within a single calendar day
when the garbageTtl is more than one day or one third of the garbageTtl.
Change-Id: If969716aeb55fb4fd0ff71d75f41a07638cd5a69
Signed-off-by: Thirumala Reddy Mutchukota <thirumala@google.com>
* stable-4.6:
GC: delete empty directories after purging loose objects
GC.prune(Set<ObjectId>): return early if objects directory is empty
Change-Id: I3d6cacf80d3b4c69ba108e970855963bd9f6ee78
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In order to limit the number of directories we check for emptiness only
consider fanout directories which contained unreferenced loose objects
we deleted in the same gc run.
Change-Id: Idf8d512867ee1c8ed40bd55752122ce83a98ffa2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Cover the case where the exception is wrapped up as a
cause, e.g., PackIndex#open(File).
Change-Id: I0df5b1e9c2ff886bdd84dee3658b6a50866699d1
Signed-off-by: Hongkai Liu <hongkai.liu@ericsson.com>
* stable-4.6:
Clean up orphan files in GC
Change-Id: I4fb6b4cd03d032535a9c04ede784bea880b4536b
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Sometimes, it is necessary to cancel a garbage collection operation.
When GC is called using the standalone executable, i.e., from a command
line, Control-Cing the process does the trick. When calling GC
programmatically, though, there is no mechanism to do it.
Add checks in the GC process so that a custom cancellable progress
monitor could be passed in order to cancel the operation at specific
points. In this case, the calling process set the cancel flag in the
progress monitor and the GC process will throw an exception that can
be caught and handled by the caller accordingly.
Change-Id: Ieaecf3dbdf244539ec734939c065735f6785aacf
Signed-off-by: Hector Caballero <hector.caballero@ericsson.com>
An orphan file is either a bitmap or an idx file in pack folder,
and its corresponding pack file is missing.
Change-Id: I3c4cb1f7aa99dd7b398bdb8d513f528d7761edff
Signed-off-by: Hongkai Liu <hongkai.liu@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Using try-with-resource means that close() will automatically be
called on the Repository object. However, according to the javadoc
of Git#close():
If the repository was opened by a static factory method in this class,
then this method calls Repository#close() on the underlying repository
instance.
This means that Repository#close() is called twice, by Git.close()
and in the outer try-with-resource, leading to a corrupt use count.
Change-Id: I37ba517eb2cc67d1cd36813598772c70208d0bc9
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Otherwise these methods may produce unexpected results if used for
strings that are intended to be interpreted locale independently.
Examples are programming language identifiers, protocol keys, and HTML
tags. For instance, "TITLE".toLowerCase() in a Turkish locale returns
"t\u0131tle", where '\u0131' is the LATIN SMALL LETTER DOTLESS I
character.
See
https://docs.oracle.com/javase/8/docs/api/java/lang/String.html#toLowerCase--http://blog.thetaphi.de/2012/07/default-locales-default-charsets-and.html
Bug: 511238
Change-Id: Id8d8f37d84d62239c918b81f8d883ed798d87656
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Logging the repository name makes it easier to track down what is
incorrectly closing a repository.
Change-Id: I42a8bdf766c0e67f100adbf76d9616584e367ac2
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The Compacter and Garbage Collector will record the estimated size of
the newly going to be created compact, gc or garbage packs. This
information can be used by the clients to better make a call on how to
actually store the pack based on the approximated expected size.
Added a new protected method DfsObjDatabase.newPack(PackSource
packSource, long estimatedPackSize), so that the clients can override
this method to make use of the estimatedPackSize while creating a new
PackDescription object. The default implementation of this method is
equivalent to
newPack(packSource).setEstimatedPackSize(estimatedPackSize). I didn't
make it abstract because that would force all the existing sub classes
of DfsObjDatabase to implement this method. Due to this default
implementation, the estimatedPackSize is added to DfsPackDescription
using a setter instead of a constructor parameter (even though
constructor parameter would be a better choice as this value is set only
during the object creation).
Change-Id: Iade1122633ea774c2e842178a6a6cbb4a57b598b
Signed-off-by: Thirumala Reddy Mutchukota <thirumala@google.com>
Adds the param information to the private method. These are generated
via tooltip to resolve the compile errors.
Bug: 511043
Change-Id: I9ba551978eab750326d1a067b296e3ae93925871
Signed-off-by: Lars Vogel <Lars.Vogel@vogella.com>
These packages don't use @since tags because they are not part of the
stable public API. Some @since tags snuck in, though. Remove them to
make the convention easier to find for new contributors and the
expectations clearer for users.
Change-Id: I6c17d3cfc93657f1b33cf5c5708f2b1c712b0d31
An unreferenced object might appear in a pack. This could only happen
because it was previously referenced, and then later that reference
was removed. When we gc, we copy the referenced objects into a new
pack, and delete the old pack. This would remove the unreferenced
object. Now we first create a loose object from any unreferenced
object in the doomed pack. This kicks off the two-week grace period
for that object, after which it will be collected if it's not
referenced.
This matches the behavior of regular git.
Change-Id: I59539aca1d0d83622c41aa9bfbdd72fa868ee9fb
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Jonathan Nieder <jrn@google.com>
It can be considered a programming error to create a Future<T>
but do nothing with that object. There is an async computation
happening and without holding and checking the Future for done
or exception the caller has no idea if it has completed.
FS doesn't really care about these StreamGobblers finishing.
Instead use Runnable with execute(Runnable), which doesn't
return a Future.
Change-Id: I93b66d1f6c869e66be5c1169d8edafe781e601f6
The new --preserve-oldpacks option moves old pack files into the
preserved subdirectory instead of deleting them after repacking.
The new --prune-preserved option prunes old pack files from the
preserved subdirectory after repacking, but before potentially
moving the latest old packfiles to this subdirectory.
These options are designed to prevent stale file handle exceptions
during git operations which can happen on users of NFS repos when
repacking is done on them. The strategy is to preserve old pack files
around until the next repack with the hopes that they will become
unreferenced by then and not cause any exceptions to running processes
when they are finally deleted (pruned).
Change-Id: If3f729f0d9ce920ee2c3e6acdde46f2068be61d2
Signed-off-by: James Melvin <jmelvin@codeaurora.org>
The initial implementation only builds the packages consumed by
Gerrit Code Review.
Test build and execution is not implemented.
We prefer to consume maven_jar custom rule from bazlets repository,
for the same reasons as in the Gerrit project:
* Caching artifacts across different clones and projects
* Exposing source classifiers and neverlink artifact
TEST PLAN:
$ bazel build :all
$ unzip -t bazel-genfiles/all.zip
Archive: bazel-genfiles/all.zip
testing: libjgit-archive.jar OK
testing: libjgit-servlet.jar OK
testing: libjgit.jar OK
testing: libjunit.jar OK
No errors detected in compressed data of bazel-genfiles/all.zip.
Change-Id: Ia837ce95d9829fe2515f37b7a04a71a4598672a0
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Generic normalization method for a possible invalid branch name.
The method compresses dividers between spaces, then replaces spaces
and non word characters with underscores.
This method is needed in preparation for subsequent EGit changes.
Bug: 509878
Change-Id: Ic0d12f098f90f912a45bcc5693d6accf751d4e58
Signed-off-by: Wim Jongman <wim.jongman@remainsoftware.com>
If there are untracked changes, apply only the untracked tree
after a successful merge. The merge tree from merging untracked
with HEAD would also contain files already reset before (changes
in tracked files) and try to reset those again,leading to false
checkout conflicts.
Bug: 505804
Change-Id: Iaced4d277623334d11e3d1cca5969590d7c5093e
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
ObjectDirectory.getShallowCommits should throw an IOException
instead of an InvalidArgumentException if invalid SHAs are present
in .git/shallow (as this file is usually edited by a human).
Change-Id: Ia3a39d38f7aec4282109c7698438f0795fbec905
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The 12 bytes `PACK...` header is written in PackWriter before reading
CachedPack files. In DfsPackFile#copyPackBypassCache, the header was not
skipped when the first block is not in cache.
Change-Id: Ibbe2e564d36b79922a936657f286addb1044d237
Signed-off-by: Zhen Chen <czhen@google.com>
Add new variation of TreeFilter in order to detect LFS pointer files in
the repository.
Additionally, update LfsPointer to support the legacy version URL [1] as
described in [2], and to allow arbitrary fields in the pointer file.
[1] https://hawser.github.com/spec/v1
[2] https://github.com/git-lfs/git-lfs/blob/master/docs/spec.md
Change-Id: I621eb058619fb1b78888a54c4b60bb110a722fc3
Signed-off-by: Dariusz Luksza <dariusz@luksza.org>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes a nasty performance issue for repositories that have many
objects referenced through refs/tags/, but not in refs/heads/.
Situations like this can arise when a project has made releases like
refs/tags/v1.0, and then decides to orphan history and start over for
version 2. The v1.0 objects are not reachable from master anymore,
but are still live due to the v1.0 tag.
When tags are packed in the GC_OTHER pack, bitmaps are not able to
cover the repository's contents. This may cause very slow counting
times during git clone, as the server must enumerate the ancient
history under refs/tags/ to respond to the client.
Clients by default always ask for all tags when asking for all heads
during clone. This has been true since git-core commit 8434c2f1afedb
(Apr 27 2008), when clone was converted to a builtin. Including tags
in the main GC pack should still allow servers to benefit from the
fast full pack reuse path when serving a clone to a client.
Change-Id: I22e29517b5bc6fa3d6b19a19f13bef0c68afdca3
Previously it was looking for a keep file with the name of a pack file
(extenstion included) appended with a '.keep'. However, the keep file
name should be the pack file name with a '.keep' extension
Change-Id: I9dc4c7c393ae20aefa0b9507df8df83610ce4d42
Signed-off-by: James Melvin <jmelvin@codeaurora.org>
* origin/stable-4.5:
Fix one case of missing object
Change-Id: Ia6384f4be71086d5a0a8c42c7521220f57dfd086
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We only need the tree id to add it to a TreeWalk so change tree's type
to AnyObjectId.
Bug: 509385
Change-Id: I98dd5fef15cd173fe1fd84273f0f48e64e12e608
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When a repository is being GCed and a concurrent push is received, there
is the possibility of having a missing object. This is due to the fact
that after the list of objects to delete is built, there is a window of
time when an unreferenced and ready to delete object can be referenced
by the incoming push. In that case, the object would be deleted because
there is no way to know it is no longer unreferenced. This will leave
the repository in an inconsistent state and most of the operations fail
with a missing tree/object error.
Given the incoming push change the last modified date for the now
referenced object, verify this one is still a candidate to delete
before actually performing the delete operation.
Change-Id: Iadcb29b8eb24b0cb4bb9335b670443c138a60787
Signed-off-by: Hector Oswaldo Caballero <hector.caballero@ericsson.com>
FileSnapshot.isModified may have reported a file to be clean although it
was actually dirty.
Imagine you have a FileSnapshot on file f. lastmodified and lastread are
both t0. Now time is t1 and you
1) modify the file
2) update the FileSnapshot of the file (lastModified=t1, lastRead=t1)
3) modify the file again
4) wait 3 seconds
5) ask the Filesnapshot whether the file is dirty or not. It erroneously
answered it's clean.
Any file which has been modified longer than 2.5 seconds ago was
reported to be clean. As the test shows that's not always correct.
The real-world problem fixed by this change is the following:
* A gerrit server using JGit to serve git repositories is processing
fetch requests while simultaneously a native git garbage collection
runs on the repo.
* At time t1 native git writes temporary files in the pack folder
setting the mtime of the pack folder to t1.
* A fetch request causes JGit to search for new packfiles and JGit
remembers this scan in a Filesnapshot on the packs folder. Since the gc
is not finished JGit doesn't see any new packfiles.
* The fetch is processed and the gc ends while the filesystem timer is
still t1. GC writes a new packfile and deletes the old packfile.
* 3 seconds later another request arrives. JGit does not yet know about
the new packfile but is also not rescanning the pack folder because it
cached that the last scan happened at time t1 and pack folder's mtime is
also t1. Now JGit will not be able to resolve any object contained in
this new pack. This behavior may be persistent if objects referenced by
the ref/meta/config branch are affected so gerrit can't read permissions
stored in the refs/meta/config branch anymore and will not allow any
pushes anymore. The pack folder will not change its mtime and therefore
no rescan will take place.
Change-Id: I3efd0ccffeb97b01207dc3e7a6b85c6b06928fad
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When the reply is already compressed (e.g. a packfile fetched using dumb
HTTP), "Content-Encoding: gzip" wastes bandwidth relative to sending the
content raw. So don't "Accept-Encoding: gzip" for such requests.
Change-Id: Id25702c0b0ed2895df8e9790052c3417d713572c
Signed-off-by: Zhen Chen <czhen@google.com>
The add(long) method was deprecated in favor of addWord(long) in
the 0.8.3 release of JavaEWAH [1].
[1] https://github.com/lemire/javaewah/commit/e443cf5e
Change-Id: I89c397ed02e040f57663d04504399dfdc0889626
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Fix JGits merge-base calculation in case of inconsistent commit times.
JGit was potentially failing to compute correct merge-bases when the
commit times where inconsistent (a parent commit was younger than a
child commit). The code in MergeBaseGenerator was aware of the fact that
sometimes the discovery of a merge base x can occur after the parents of
x have been seen (see comment in #carryOntoOne()). But in the light of
inconsistent commit times it was possible that these parents of a
merge-base have already been returned as a merge-base.
This commit fixes the bug by buffering all commits generated by
MergeBaseGenerator. It is expected that this buffer will be small
because the number of merge-bases will be small. Additionally a new
flag is used to mark the ancestors of merge-bases. This allows to filter
out the unwanted commits.
Bug: 507584
Change-Id: I9cc140b784c3231b972bd2c3de61a789365237ab
This does not address all cases where no message is specified, only
cases where Repository#isValidRefName returns false.
Change-Id: Ib88cdabfdcdf37be0053e06949b0e21ad87a9575
Signed-off-by: Grace Wang <gracewang92@gmail.com>
TransportHttp sets 'Accept-Encoding: gzip' to allow the server to
compress HTTP responses. When fetching a loose object over HTTP, it
uses the following code to read the response:
InputStream in = openInputStream(c);
int len = c.getContentLength();
return new FileStream(in, len);
If the content is gzipped, openInputStream decompresses it and produces
the correct content for the object. Unfortunately the Content-Length
header contains the length of the compressed stream instead of the
actual content length. Use a length of -1 instead since we don't know
the actual length.
Loose objects are already compressed, so the gzip encoding typically
produces a longer compressed payload. The value from the Content-Length
is too high, producing EOFException: Short read of block.
Change-Id: I8d5284dad608e3abd8217823da2b365e8cd998b0
Signed-off-by: Zhen Chen <czhen@google.com>
Helped-by: Jonathan Nieder <jrn@google.com>
The InputStream in FileStream in downloadPack is never closed.
Change-Id: I59975d0b8d51f4b3e3ba9d4496b254d508cb936d
Signed-off-by: Zhen Chen <czhen@google.com>
MonotonicClock can be implemented to provide more certainity about
time than the standard System.currentTimeMillis() can provide. This
can be used by classes such as PersonIdent and Ketch to rely on
more certainity about time moving in a strictly ascending order.
Gerrit Code Review can also leverage this interface through its
embedding of JGit and use MonotonicClock and ProposedTimestamp to
provide stronger assurance that NoteDb time is moving forward.
Change-Id: I1a3cbd49a39b150a0d49b36d572da113ca83a786
Use Oxygen M3 Orbit repository which provides the bundles built using
the new orbit-recipe based build.
CQ: 11658
Change-Id: I7f3dcc966732b32830c75d5daa55383bd028d182
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The type parameters can now be inferred when creating
ConcurrentHashMap.
A for loop over the keys of a ConcurrentHashMap doesn't
need to use an Iterator<Map.Entry>; loop syntax handles
this just fine over keySet().
Change-Id: I1f85bb81b77f7cd1caec77197f2f0bf78e4a82a1
Java 8 fixed the silent flush during close issue by
FilterOutputStream (base class of BufferedOutputStream)
using try-with-resources to close the stream, getting a
behavior matching what JGit's SafeBufferedOutputStream
was doing:
try {
flush();
} finally {
out.close();
}
With Java 8 as the minimum required version to run JGit
it is no longer necessary to override close() or have
this class. Deprecate the class, and use the JRE's version
of close.
Change-Id: Ic0584c140010278dbe4062df2e71be5df9a797b3
This simplifies testing for Gerrit Code Review where
application code is updating the repository description
and the test harness uses InMemoryRepository.
Change-Id: I9fbcc028ae24d90209a862f5f4f03e46bfb71db0
This method pair allows the caller to read and modify the description
file that is traditionally used by gitweb and cgit when rendering a
repository on the web.
Gerrit Code Review has offered this feature for years as part of
its GitRepositoryManager interface, but its fundamentally a feature
of JGit and its Repository abstraction.
git-core typically initializes a repository with a default value
inside the description file. During getDescription() this string
is converted to null as it is never a useful description.
Change-Id: I0a457026c74e9c73ea27e6f070d5fbaca3439be5
Bazel runs ErrorProne by default and ErrorProne rightly complains that
allowing the user to specify any Cipher can lead to insecure code
(in particular, getCipher("AES") operates in ECB mode). Unfortunately
this is required to support existing repositories insecurely stored
on S3.
Extract the insecure factory code to its own class so this can be built
as a java_library() with this check disabled.
Change-Id: I34f381965bdaa25d5aa8ebf6d8d5271b238334e0
Because flush calls interrupt with writeLock held, it cannot interrupt
a write. Simplify by no longer defending against that.
Change-Id: Ib0b39b425335ff7b0ea1b1733562da5392576a15
StreamCopyThread#run consistently interrupts itself whenever it
discovers it has been interrupted by StreamCopyThread#flush while not
reading. The flushCount is not needed to avoid lost flushes.
All in-tree users of StreamCopyThread never flush. As a nice side
benefit, this avoids the expense of atomic operations that have no
purpose for those users.
Change-Id: I1afe415cd09a67f1891c3baf712a9003ad553062
Now that RepositoryCache have a time based eviction strategy, get rid
of the strategy to evict cache entries if heap memory is running low,
i.e. soft references. Main reason why time based eviction was
implemented was to offer an alternative to the unpredictable soft
references.
Relying on soft references is not working, especially in large heap. The
JVM GC will consider collecting soft references as last resort before
throwing an out of memory error. For example, an application like Gerrit
configured with a 128GB heap, GC will wait until all 128GB is filled
before collecting the soft references so the application will be
suffering long pauses caused by GC for a long time already. In other
words, you will have to restart application because it's unusable before
JVM eviction kicks in.
Keeping the SoftReference in RepositoryCache is causing more harm than
good. If you use the time based eviction (which is the default strategy)
and want to tune JVM to release soft references more aggressively, it
will release repositories from the cache even though they are not
expired which defeats the purpose of the repository cache.
Gerrit uses Lucene library which uses soft references and this is
causing a "memory leak" except if you configure JVM to release soft
references more aggressively which have the nasty side effect of
evicting non expired repositories from the cache.
Change-Id: I9940bd800464c7f007696d0ccde52ea617b2ebce
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Work around issues with JSch not handling interrupts by
isolating the JSch interactions onto another thread.
Run write and flush on a single threaded Executor using
simple Callable operations wrapping the method calls,
waiting on the future to determine the outcome before
allowing the caller to continue.
If any operation was interrupted the state of the stream
becomes fuzzy at close time. The implementation tries to
interrupt the pending write or flush, but this is very
likely to corrupt the stream object, so exceptions are
ignored during such a dirty close.
Change-Id: I42e3ba3d8c35a2e40aad340580037ebefbb99b53
In case a value is used which isn’t a power of 2 there will be a high
chance of java.lang.ArrayIndexOutBoundsException and
org.eclipse.jgit.errors.CorruptObjectException due to a mismatching
assumption for the DfsBlockCache#blockSizeShift parameter.
Change-Id: Ib348b3704edf10b5f93a3ffab4fa6f09cbbae231
Signed-off-by: Philipp Marx <smigfu@googlemail.com>
* GC.tooManyLooseObjects() always responded true since the loop missed
to advance the iterator so it always incremented until the threshold was
exceeded.
* Also fix loop exit criterion which was off by 1.
* Add some tests.
Change-Id: I70976dfaa026efbcf3c46bd45941f37277a18e04
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
StreamCopyThread.flush was introduced in
61645b938bc934fda3b0624c5bac1e3495634750 (Add timeouts to smart
transport clients, 2009-06-19) to support timeouts on write in JSch.
The commit message from that change explains:
JSch made a timeout on write difficult because they explicitly do
a catch for InterruptedException inside of their OutputStream. We
have to work around that by creating an additional thread that just
shuttles data between our own OutputStream and the real JSch stream.
The code that runs on that thread is structured as follows:
while (!done) {
int n = src.read(buf);
dst.write(buf, 0, n);
}
with src being a PipedInputStream representing the data to be written
to JSch. To add flush support, that change wanted to add an extra step
if (wantFlush)
dst.flush();
but to handle the case where the thread is blocked in the read() call
waiting for new input, it needs to interrupt the read. So that is how
it works: the caller runs
pipeOut.write(some data);
pipeOut.flush();
copyThread.flush();
to write some data and force it to flush by interrupting the read.
After the pipeOut.flush(), the StreamCopyThread reads the data that was
written and prepares to copy it out. If the copyThread.flush() call
interrupts the copyThread before it acquires writeLock and starts
writing, we throw away the data we just read to fulfill the flush.
Oops.
Noticed during the review of e67d59df3f
(StreamCopyThread: Do not let flush interrupt a write, 2016-11-04),
which introduced this bug.
Change-Id: I4aceb5610e1bfb251046097adf46bca54bc1d998
flush calls interrupt() to interrupt a pending read and trigger a
flush. Unfortunately that interrupt() call can also interrupt a
pending write, putting Jsch in a bad state and triggering "Short read
of block" errors. Add locking to ensure the flush only interrupts
reads as intended.
Change-Id: Ib105d9e107ae43549ced7e6da29c22ee41cde9d8
If there was a new flush() call during flush previous bytes, we need to
catch it in order to process the new bytes between the two flush()
calls instead of going to last catch IOException clause and end the
thread.
Change-Id: Ibc58a1fa97559238c13590aedbb85e482d85e465
Signed-off-by: Zhen Chen <czhen@google.com>
ObjectId is serializable, and so are its subtypes. Ensure that
serialization does not follow the hash collision chain internal to the
ObjectIdOwnerMap, otherwise completely unrelated objects may get
serialized when a RevObject is serialized.
Note that serializing a RevCommit or RevTag may serialize quite a few
objects due to the parent/object links they contain. A user has no real
control over how many objects will be written when a RevCommit is
serialized. C.f [1]. This change does not resolve that, but in any case
this internal hash collision chain link should not participate in
serialization.
[1] https://github.com/gitblit/gitblit/pull/1141
Change-Id: Ice331a9dc80a59ca360fcc04adaff8b5e750d847
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Previously, the streamFileThreshold, the threshold at which a file
would be streamed rather than loaded entirely into memory, was only
configurable on a global basis.
This commit makes this threshold configurable on a per-loader basis.
Bug: 490404
Change-Id: I492c18c3155dbf56eedda9044a61d76120fd75f9
Signed-off-by: Kevin Corcoran <kevin.corcoran@puppetlabs.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
With the auto option, gc checks whether any housekeeping is required; if
not, it exits without performing any work. Some JGit commands run gc
--auto after performing operations that could create many loose objects.
Housekeeping is required if there are too many loose objects or too many
packs in the repository.
If the number of loose objects exceeds the value of the gc.auto option
jgit's GC consolidates all existing packs into a single pack (equivalent
to -A option), whereas git-core would combine all loose objects into a
single pack using repack -d -l. Setting the value of gc.auto to 0
disables automatic packing of loose objects.
If the number of packs exceeds the value of gc.autoPackLimit, then
existing packs (except those marked with a .keep file) are consolidated
into a single pack by using the -A option of repack. Setting
gc.autoPackLimit to 0 disables automatic consolidation of packs.
Like git the following jgit commands run auto gc:
- fetch
- merge
- rebase
- receive-pack
The auto gc for receive-pack can be suppressed by setting the config
option receive.autogc = false
Change-Id: I68a2a051b39ec2c53cb7c4b8f6c596ba65eeba5d
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The new method addPaths(List<String>) allows callers to add multiple
paths without having to iterate over several calls to addPath(String).
Change-Id: I2c3746a97ead7118fb0ed5543a2c843224719031
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
This SIOOBE happens reproducibly when trying to access
a repository containing Cygwin symlinks
Change-Id: I25f103fcc723bac7bfaaeee333a86f11627a92c7
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Remove the assumption that the local repository is a file based one.
Change-Id: I8f10fe7a54e9fc07f2a23d7901e52b65aa570d45
Signed-off-by: Thomas Meyer <thomas.mey@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git barfs on these (and they don't make any sense), so we certainly
shouldn't write them.
Change-Id: I3faf8554a05f0fd147be2e63fbe55987d3f88099
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Allow for higher concurrency on DfsBlockCache by adding a configuration
for number of estimated concurrent requests.
Change-Id: Ia65e58ecb2c459b6d9c9697a2f715d933270f7e6
Signed-off-by: Philipp Marx <smigfu@googlemail.com>
* stable-4.5:
Config: do not add spaces before units
Change-Id: I54185f54e6d78d7aac873ee5f990f09582318857
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Adding a space before the unit ('g', 'm', 'k) causes git to fail with
the error:
fatal: bad numeric config value
Change-Id: I57f11d3a1cdcca4549858e773af1a2a80fc0369f
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
The 'factory' field is lazy initialized in the detect() method.
According to FindBugs:
Because the compiler or processor may reorder instructions, threads
are not guaranteed to see a completely initialized object, if the
method can be called by multiple threads.
Fix this by declaring the member as 'volatile'.
Change-Id: Ib32663bb28c9564584256e01f625b4e7875e6223
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
To avoid that people try to "fix" it.
Change-Id: Ib4b35e357e4c068a17243ebd2d57b058c54d5834
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.5:
Unconditionally close repositories in RepositoryCache.clear()
Fix eviction of repositories with negative usage count
Adapt to parameter removed from
RepositoryCache.unregisterAndCloseRepository().
Change-Id: I7087667056ced401a3b3a027977f2715cd77a1c5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Earlier we tried to close the repository before removing it from the
cache, so close only reduced refcount but didn't close it.
Now that we no longer leak usage count on purpose and the usage count is
now ignored anyway, there is no longer a need to run the removal twice.
Change-Id: I8b62cec6d8a3e88c096d1f37a1f7f5a5066c90a0
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
If the repository close method was called twice (or more) for one open,
the usage count became negative and the repository was never be evicted
from the cache because the method checking if repository is expired was
not considering negative usage count.
Change-Id: I18a80c415c54c37d1b9def2b311ff2d0afa455ca
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Symlinks on MacOS are written as UTF-8 NFD, but
readSymbolicLink().toString() converts to NFC with potentially fewer
bytes. May occur in particular if the link target has non-ASCII
characters for which the NFC and NFD encodings differ. This may lead
to an EOFException: Short read of block.
This causes all kinds of weird effects in EGit, ranging from failing
rebases (which report the exception to the user) to EGit decorations in
the navigator silently disappearing (and never coming back).
* Rename readContentAsNormalizedString() to readSymlinkTarget() as it's
called only for symlinks. Also make it protected.
* Fix by allowing the read to succeed even if less than the expected
number of bytes are returned by the entry's input stream.
* Override in FileTreeIterator to use fs.readSymlink() directly.
Includes a new MacOS-only test.
Change-Id: I264c5972d67b1cbb1ed690580f5706e671b9affd
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Spawn an ObjectReader from the ObjectInserter, so the flush can be
delayed at the end of the fetch.
Change-Id: I35fe8c8370c06c25262645202aec2b1318057c19
Signed-off-by: Zhen Chen <czhen@google.com>
The package-private method Repository::gitInternalSlash() is not
referenced from anywhere within the package.
Last uses were removed with
0f8743d4 "Remove deprecated Tree, TreeEntry, FileTreeEntry and friends"
6e9fdce9 "Kill GitIndex"
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Change-Id: I514bf684ad0da808f6523e9e46db9674a25e1fb5
CheckoutCommand was not returning updated and removed files in case of
an overall status of NONDELETED. That's status which occurs especially
on the Windows platform when Checkout wanted to delete files but the
filesystem doesn't allow this. The situation is more seldom on linux/mac
because open filehandles don't stop a deletion attempt and checkout
succeeds more often.
Change-Id: I4828008e58c09bd8f9edaf0f7eda0a79c629fb57
* stable-4.5:
Fix carrying over flags during a RevWalk
Change-Id: Ibf4573c5664271dfa7a6ecc3ede6eaad749f89d8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There was a bug when carrying over flags from a merge commit to its
non-first parents. The first parent of a merge commit was handled
differently and correct but the non-first parents are handled by a
recursive algorithm. Flags should be copied from the root merge commit
to parent-2, to grandparent-2, ... up to the limit of STACK_DEPTH==500
parents-levels. But the recursive algorithm was always copying only to
the direct parents of the merge commit and not the grand*-parents.
This seems to be no problem when commits are handled in a strict date
order because then copying only one level is no problem if children are
handled before parents. But when commits are not seperated anymore by
distinctive correct dates (e.g. because all commits have the same date)
then it may happen that a merge-parent is handled before the merge
commit and when dealing later with the merge commit one has to copy
flags down to more than one level
Bug: 501211
Change-Id: I2d79a7cf1e3bce21a490905ccd9d5e502d7b8421
There are already suppressions for the same warnings in other parts
of this class.
Change-Id: Ic3b45525c6c8200cba975d14c7650cedb4409a4d
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
UploadPackLogger is deprecated but will not be removed until
JGit version 5.0.
Suppress the unavoidable deprecation warnings on usages of the
interface that are kept for backwards compatibility.
Add a TODO so that we don't forget to remove it in 5.0.
Change-Id: Id248002b9bdf23db192427196d54c722a012106c
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.5:
Turn off doclint also during Maven site generation
Prepare 4.5.1-SNAPSHOT builds
JGit v4.5.0.201609210915-r
Unconditionally close repository in unregisterAndCloseRepository
Change-Id: Ibfd11669cd74d2e62b014c18fd39b646b200c8c5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Repository.close() method is used when reference counting and expiration
needs to be honored. The RepositoryCache.unregisterAndCloseRepository
method should close the repository unconditionally. This is also indicated
from its javadoc.
Change-Id: I19392d1eaa17f27ae44b55eea49dcff05a52f298
The class AtomicObjectOutputStream should be available to all lfs
related classes, not only to the server side. Move the class from
org.eclipse.jgit.lfs.server.fs to org.eclipse.jgit.lfs.internal to
achieve that.
Change-Id: I028e1c9ec7c21f316340b21d558b9a6b77e2060d
Adds a JGit built-in implementation of the "git lfs smudge" filter. This
filter should do the same as the one described in [1] besides that it
only supports the local case when the lfs objects are already present in
the media directory. Remote cases where download of LFS objects from an
LFS server is needed will be done in a later commit.
[1] https://github.com/github/git-lfs/blob/master/docs/man/git-lfs-smudge.1.ronn
Change-Id: I8ff661d4edd3667ef7f86f3b4fa33e568eb4c8f4
If the configuration parameter filter.<filterDriverName>.useJGitBuiltin
is set to true then for all corresponding filters JGit will try to
execute the built-in filter instead of the filter-command which is
defined in git configuration. It will fallback to the non-built-in
filters if no built-in filters are registered or if constructing them
leads to exceptions. If set to false JGit will not try to execute
built-in filters for the specified filter driver.
Example: The configuration contains the following lines
[filter "lfs"]
clean = git-lfs clean -- %f
smudge = git-lfs smudge -- %f
useJGitBuiltin = true
Addtionally the .gitattributes file in the root of the working tree
contains:
*.bin filter=lfs
In this case when new content is added similar to "git add 1.bin" then
the following will happen:
- jgit will check whether a built-in command factory was registered
for the command "jgit://builtin/lfs/clean". If that is true the
factory is used to create a built-in filter command and that
command is used to filter the content
- Otherwise jgit will call the external program "git lfs clean ..."
to do the filtering
Change-Id: Idadb1db06b1e89e7031d7ed6319904973c367d38
JGit supports smudge filters defined in repository configuration. The
filters are implemented as external programs filtering content by
accepting the original content (as seen in git's object database) on
stdin and which emit the filtered content on stdout. This content is
then written to the file in the working tree. To run such a filter JGit
has to start an external process and pump data into/from this process.
This commit adds support for built-in smudge filters which are
implemented in Java and which are executed by jgit's main thread. When a
filter is defined in the configuration as
"jgit://builtin/<filterDriverName>/smudge" then JGit will lookup in a
static map whether a builtin filter is registered under this name. If
found such a filter is called to do the filtering.
The functionality in this commit requires that a program using JGit
explicitly calls the JGit API to register built-in implementations for
specific smudge filters. In follow-up commits configuration parameters
will be added which trigger such registrations.
Change-Id: Ia743aa0dbed795e71e5792f35ae55660e0eb3c24
JGit supports clean filters defined in repository configuration. The
filters are implemented as external programs filtering content by
accepting the original content (as seen in the working tree) on stdin
and which emit the filtered content on stdout. To run such a filter JGit
has to start an external process and pump data into/from this process.
This commit adds support for clean filters which are implemented
in Java and which are executed by jgit's main thread. When a filter is
defined in the configuration as
"jgit://builtin/<filterDriverName>/clean" then JGit will lookup in a
static map whether a filter is registered under this name. If found
such a filter is called to do the filtering.
The functionality in this commit requires that a program using JGit
explicitly calls the JGit API to register built-in implementations for
specific clean filters. In follow-up commits configuration parameters
will be added which trigger such registrations. Other commits will add
implementations for lfs filters.
Change-Id: I0344d3c54801c9a46e5a606c5df17e5f2e17b2be
This is like PackStatistics, but for PackParser.
Change-Id: I854215c0956fd0b36843d631780be303e021b8be
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
BranchConfig treated this config property as a boolean, but git also
allows the values "preserve" and "interactive". Config property
pull.rebase also allows the same values.
Replace private enum PullCommand.PullRebaseMode by new public enum
BranchConfig.BranchRebaseMode and adapt all uses. Add a new setter to
PullCommand.
Note: PullCommand will treat "interactive" like "true", i.e., as a
non-interactive rebase. Not sure how "interactive" should be handled.
At least it won't balk on it.
Bug: 499482
Change-Id: I7309360f5662b2c2efa1bd8ea6f112c63cf064af
Signed-off-by: Thomas Wolf <thomas.wolf@paranor.ch>
Change-Id: I6691b454404dd4db3c690ecfc7515de765bc2ef7
Signed-off-by: Martin Goellnitz <m.goellnitz@outlook.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- enhance FS.readPipe to throw an exception if the external command
fails to enable the caller to handle the command failure
- reduce log level to warning if system git config does not exist
- improve log message
Bug: 476639
Change-Id: I94ae3caec22150dde81f1ea8e1e665df55290d42
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This allows the same try/catch to handle parsing the command list,
push certificate and push options. Any errors will be caught and
handled by the same catch block, as the client is in the same state.
Change-Id: I13a66f9100e2dc8ca8f72cd701a5bd44d093ec84
Checking if the instance allows push options before returning the
collection or null is a bit overkill. Just return the collection
or return null.
Change-Id: Icdc3755194373966e5819284aeb9bfe8dd34de82
Some embeddings of JGit require creating a ReceivePack instance in
another process from the one that handled the network socket with the
client. Similar to the PushCertificate add a setter to allow the
option list to be supplied.
Change-Id: I303a30e54942ad067c79251eff8b53329c406628
Refactor all of the push option support code to allocate the list
immediately before parsing the options section off the stream.
Move option support down to ReceivePack instead of BaseReceivePack.
Push options are specific to the ReceivePack protocol and are not
likely to appear in the 4 year old subscription proposal. These
changes are OK before JGit 4.5 ships as no consumer should be relying
on these new APIs.
Change-Id: Ib07d18c877628aba07da07cd91875f918d509c49
Initialize pushOptions when we decide to use them, instead of when we
advertise them.
In the case of HTTP the advertisement is in a different network
request, hence in a different instance of the BaseReceivePack.
Change-Id: I094c60942e04de82cb6d8433c9cd43a46ffae332
Signed-off-by: Stefan Beller <sbeller@google.com>
Do not open an OBJ_TREE if the caller is expecting an OBJ_BLOB or
OBJ_COMMIT; instead throw IncorrectObjectTypeException. This better
matches behavior of WindowCursor, the ObjectReader implementation of
the local file based object store.
Change-Id: I3fb0e77f54895b123679a405e1b6ba5b95752ff0
DfsRefDatabase#compareAndPut had a vague semantics for reference
matching. Because of this, an operation to make a symbolic
reference had been broken for some DFS implementations even if they
followed the contract of compareAndPut. The clarified semantics
requires the implementations to satisfy the followings:
* Matching references should be both symbolic references or both
object ID references.
* If both are symbolic references, both should have the same target
name.
* If both are object ID references, both should have the same object
ID.
This semantics is defined based on
https://git.eclipse.org/r/#/c/77416/. Before this commit,
DfsRefDatabase couldn't see the target of symbolic references.
InMemoryRepository is changed to comply with the new semantics. This
semantics change can affect the existing DFS implementations that only
checks object IDs. This commit adds two tests that the previous
InMemoryRepository couldn't pass.
Change-Id: I6c6b5d3cc8241a81f4a37782381c88e8a59fdf15
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
When doing a detaching operation, JGit fakes a SymbolicRef as an
ObjectIdRef. This is because RefUpdate#updateImpl dereferences the
SymbolicRef when updating it. For example, assume that HEAD is
pointing to refs/heads/master. If I try to make a detached HEAD
pointing to a commit c0ffee, RefUpdate dereferences HEAD as
refs/heads/master first and changes refs/heads/master to c0ffee. The
detach argument of RefDatabase#newUpdate avoids this dereference by
faking HEAD as ObjectIdRef.
This faking is problematic for the linking operation of
DfsRefDatabase. It does a compare-and-swap operation on every
reference change because of its distributed systems nature. If a
SymbolicRef is faked as an ObjectRef, it thinks that there is a
racing change in the reference and rejects the update. Because of
this, DFS based repositories cannot change the link target of symbolic
refs. This has not been a problem for file-based repositories because
they have a file-lock based semantics instead of the CAS based one.
The reference implementation, InMemoryRepository, is not affected
because it only compares ObjectIds.
When [1] introduced this faking code, there was no way for RefUpdate
to distinguish the detaching operation. When [2] fixed the detaching
operation, it introduced a detachingSymbolicRef flag. This commit uses
this flag to control whether it needs to dereference the symbolic refs
by calling Ref#getLeaf. The same flag is used in the reflog update
operation.
This commit does not affect any operation that succeeds currently. In
some DFS repository implementations, this fixes a ref linking
operation, which is currently failing.
[1]: 01b5392cdb
[2]: 3a86868c08
Change-Id: I118f85f0414dbfad02250944e28d74dddd59469b
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Imitate the packet tracing feature from C Git v1.7.5-rc0~58^2~1 (add
packet tracing debug code, 2011-02-24). Unlike C Git, use the log4j
log level setting instead of the GIT_TRACE_PACKET environment variable
to enable tracing.
Tested as follows:
1. Enable tracing by adding the lines
log4j.logger.org.eclipse.jgit.transport=DEBUG, stderr
log4j.additivity.org.eclipse.jgit.transport=false
to org.eclipse.jgit.pgm/resources/log4j.properties.
2. mvn package
3. org.eclipse.jgit.pgm/target/jgit \
ls-remote git://git.kernel.org/pub/scm/git/git 2>&1 |less
Then the output provides a trace of packets sent and received over
the wire:
2016-08-24 16:36:42 DEBUG PacketLineOut:145 - git> git-upload-pack /pub/scm/git/git^@host=git.kernel.org^@
2016-08-24 16:36:42 DEBUG PacketLineIn:165 - git< 2632c897f74b1cc9b5533f467da459b9ec725538 HEAD^@multi_ack thin-pack side-band side-band-64k ofs-delta shallow no-progress include-tag multi_ack_detailed symref=HEAD:refs/heads/master agent=git/2.8.4
2016-08-24 16:36:42 DEBUG PacketLineIn:165 - git< e0c1ceafc5bece92d35773a75fff59497e1d9bd5 refs/heads/maint
Change-Id: I5028c064f3ac090510386057cb4e6d30d4eae232
Signed-off-by: Dan Wang <dwwang@google.com>
This fixes the tests failed in JDK8.
FS uses java.nio API to get file attributes. The timestamps obtained
from that API are more precise than the ones from
java.io.File#lastModified() since Java8.
This difference accidentally makes JGit detect newly added files as
smudged. Use the precised timestamp to avoid this false positive.
Bug: 500058
Change-Id: I9e587583c85cb6efa7562ad6c5f26577869a2e7c
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
The metadata comparison of submodules is not reliable because of the
last modified timestamp and directory length.
Bug: 498759
Change-Id: If5db69ef3868e475ac477d3e8a7750b268799b0c
The exception can be thrown in a various reason, and sometimes 403
Forbidden is not appropriate. Make the HTTP status code customizable.
Change-Id: If2ef6f454f7479158a4e28a12909837db483521c
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
AddCommandTest is flaky because IOException is thrown sometimes.
Caused by: java.io.IOException: Stream closed
at java.lang.ProcessBuilder$NullOutputStream.write(ProcessBuilder.java:433)
at java.io.OutputStream.write(OutputStream.java:116)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:82)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:140)
at java.io.FilterOutputStream.close(FilterOutputStream.java:158)
at org.eclipse.jgit.util.FS.runProcess(FS.java:993)
at org.eclipse.jgit.util.FS.execute(FS.java:1102)
at org.eclipse.jgit.treewalk.WorkingTreeIterator.filterClean(WorkingTreeIterator.java:470)
... 22 more
OpenJDK replaces the underlying OutputStream with NullOutputStream when
the process exits. This throws IOException for all write operation. When
it exits before JGit writes the input to the pipe buffer, the input
stays in BufferedOutputStream. The close method tries to write it again,
and IOException is thrown.
Since we ignore IOException in StreamGobbler, we also ignore it when
we close the stream.
Fixes Bug 499633.
Change-Id: I30c7ac78e05b00bd0152f697848f4d17d53efd17
Signed-off-by: Masaya Suzuki <draftcode@gmail.com>
If a reference was updated more recently than a pack was written
(typical) the PackList was perpetually dirty until the next GC
was completed for the repository.
Detect this condition by observing no changes to the PackList
membership and resetting the dirty bit.
Change-Id: Ie2133aca1f8083307c73b6a26358175864f100ef
This will be used by EGit for implementing commit amend in the staging
view (see Idcd1efeeee8b3065bae36e285bfc0af24ab1e88f).
Change-Id: Ice9ebbb1c0c3314c679f4db40cdd3664f61c27c3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Reported-by: David Pursehouse <david.pursehouse@gmail.com>
Change-Id: I9e9b021d335bda4d58b6bcc30f59b81ac5b37724
Signed-off-by: Jonathan Nieder <jrn@google.com>
* changes:
Shallow fetch: Pass along "shallow"s in unparsed-wants case, too
Shallow fetch: Pass a DepthWalk to PackWriter
Change-Id: I7d1c3b4d0b7ebc254b53404d1618522b0174ac23
Since 84d2738ff2 (Don't skip want validation when the client sends no
haves, 2013-06-21), this branch is not taken. Process the
"shallow"s anyway as a defensive measure in case the code path gets
revived.
Change-Id: Idfb834825d77f51e17191c1635c9d78c78738cfd
Signed-off-by: Jonathan Nieder <jrn@google.com>
d385a7a5e5 (Shallow fetch: Respect "shallow" lines, 2016-08-03) forgot
that UploadPack wasn't passing a DepthWalk to PackWriter in the first
place. As a result, shallow clones fail:
java.lang.IllegalArgumentException: Shallow packs require a DepthWalk
at org.eclipse.jgit.internal.storage.pack.PackWriter.preparePack(PackWriter.java:756)
at org.eclipse.jgit.transport.UploadPack.sendPack(UploadPack.java:1497)
at org.eclipse.jgit.transport.UploadPack.sendPack(UploadPack.java:1381)
at org.eclipse.jgit.transport.UploadPack.service(UploadPack.java:774)
at org.eclipse.jgit.transport.UploadPack.upload(UploadPack.java:667)
at org.eclipse.jgit.http.server.UploadPackServlet.doPost(UploadPackServlet.java:191)
Change-Id: Ib0d8c2946eebfea910a2b767fb92e23da15d4749
cgit changed the --depth parameter to mean the total depth of history
rather than the depth of ancestors to be returned [1]. JGit still uses
the latter meaning, so update it to match cgit.
depth=0 still means a non-shallow clone. depth=1 now means only the
wants rather than the wants and their direct parents.
This is accomplished by changing the semantic meaning of "depth" in
UploadPack and PackWriter to mean the total depth of history desired,
while keeping "depth" in DepthWalk.{RevWalk,ObjectWalk} to mean
the depth of traversal. Thus UploadPack and PackWriter always
initialize their DepthWalks with "depth-1".
[1] upload-pack: fix off-by-one depth calculation in shallow clone
https://code.googlesource.com/git/+/682c7d2f1a2d1a5443777237450505738af2ff1a
Change-Id: I87ed3c0f56c37e3491e367a41f5e555c4207ff44
Signed-off-by: Terry Parker <tparker@google.com>
When fetching from a shallow clone, the client sends "have" lines
to tell the server about objects it already has and "shallow" lines
to tell where its local history terminates. In some circumstances,
the server fails to honor the shallow lines and fails to return
objects that the client needs.
UploadPack passes the "have" lines to PackWriter so PackWriter can
omit them from the generated pack. UploadPack processes "shallow"
lines by calling RevWalk.assumeShallow() with the set of shallow
commits. RevWalk creates and caches RevCommits for these shallow
commits, clearing out their parents. That way, walks correctly
terminate at the shallow commits instead of assuming the client has
history going back behind them. UploadPack converts its RevWalk to an
ObjectWalk, maintaining the cached RevCommits, and passes it to
PackWriter.
Unfortunately, to support shallow fetches the PackWriter does the
following:
if (shallowPack && !(walk instanceof DepthWalk.ObjectWalk))
walk = new DepthWalk.ObjectWalk(reader, depth);
That is, when the client sends a "deepen" line (fetch --depth=<n>)
and the caller has not passed in a DepthWalk.ObjectWalk, PackWriter
throws away the RevWalk that was passed in and makes a new one. The
cleared parent lists prepared by RevWalk.assumeShallow() are lost.
Fortunately UploadPack intends to pass in a DepthWalk.ObjectWalk.
It tries to create it by calling toObjectWalkWithSameObjects() on
a DepthWalk.RevWalk. But it doesn't work: because DepthWalk.RevWalk
does not override the standard RevWalk#toObjectWalkWithSameObjects
implementation, the result is a plain ObjectWalk instead of an
instance of DepthWalk.ObjectWalk.
The result is that the "shallow" information is thrown away and
objects reachable from the shallow commits can be omitted from the
pack sent when fetching with --depth from a shallow clone.
Multiple factors collude to limit the circumstances under which this
bug can be observed:
1. Commits with depth != 0 don't enter DepthGenerator's pending queue.
That means a "have" cannot have any effect on DepthGenerator unless
it is also a "want".
2. DepthGenerator#next() doesn't call carryFlagsImpl(), so the
uninteresting flag is not propagated to ancestors there even if a
"have" is also a "want".
3. JGit treats a depth of 1 as "1 past the wants".
Because of (2), the only place the UNINTERESTING flag can leak to a
shallow commit's parents is in the carryFlags() call from
markUninteresting(). carryFlags() only traverses commits that have
already been parsed: commits yet to be parsed are supposed to inherit
correct flags from their parent in PendingGenerator#next (which
doesn't happen here --- that is (2)). So the list of commits that have
already been parsed becomes relevant.
When we hit the markUninteresting() call, all "want"s, "have"s, and
commits to be unshallowed have been parsed. carryFlags() only
affects the parsed commits. If the "want" is a direct parent of a
"have", then it carryFlags() marks it as uninteresting. If the "have"
was also a "shallow", then its parent pointer should have been null
and the "want" shouldn't have been marked, so we see the bug. If the
"want" is a more distant ancestor then (2) keeps the uninteresting
state from propagating to the "want" and we don't see the bug. If the
"shallow" is not also a "have" then the shallow commit isn't parsed
so (2) keeps the uninteresting state from propagating to the "want
so we don't see the bug.
Here is a reproduction case (time flowing left to right, arrows
pointing to parents). "C" must be a commit that the client
reports as a "have" during negotiation. That can only happen if the
server reports it as an existing branch or tag in the first round of
negotiation:
A <-- B <-- C <-- D
First do
git clone --depth 1 <repo>
which yields D as a "have" and C as a "shallow" commit. Then try
git fetch --depth 1 <repo> B:refs/heads/B
Negotiation sets up: have D, shallow C, have C, want B.
But due to this bug B is marked as uninteresting and is not sent.
Change-Id: I6e14b57b2f85e52d28cdcf356df647870f475440
Signed-off-by: Terry Parker <tparker@google.com>
DepthWalk needs to override toObjectWalkWithSameObjects() and thus
needs to be able to directly set the objects and freeFlags fields, so
make them package private.
Change-Id: I24561b82c54ba3d6522582ca25105b204d777074
Signed-off-by: Terry Parker <tparker@google.com>
When doing an incremental fetch from JGit, "have" commits are marked
as "uninteresting". In a non-shallow fetch, when the RevWalk hits an
"uninteresting" commit it marks the commit's corresponding tree as
uninteresting. That has the effect of dropping those trees and all the
trees and blobs they reference out of the thin pack returned to the
client.
However, shallow fetches use a DepthWalk to limit the RevWalk, which
nearly always causes the RevWalk to terminate before encountering the
"have" commits. As a result the pack created for the incremental fetch
never encounters "uninteresting" tree objects and thus includes
duplicate objects that it knows the client already has.
Change-Id: I7b1f7c3b0d83e04d34cd2fa676f1ad4fec904c05
Signed-off-by: Terry Parker <tparker@google.com>
Previously jgit would attempt to clean git repositories that had not
been committed by calling a non-recursive delete on them, which would
fail as they are directories. This commit addresses that issue in the
following ways.
Repositories are skipped in a default clean, similarly to cgit and only
cleaned when the force flag is applied. When the force flag is applied
repositories are deleted using a recursive delete call. The force flag
and setForce method are added here to CleanCommand to support this
change.
Bug: 498367
Change-Id: Ib6cfff65a033d0d0f76395060bf76719e13fc467
Signed-off-by: Matthaus Owens <matthaus@puppetlabs.com>
We have to be able to access the enum from outside the package as part of
the API.
Change-Id: I4bdc6bd53a14237c5f4fb9397ae850f9a24c4cfb
Signed-off-by: Stefan Beller <sbeller@google.com>
The message "close() called when useCnt is already zero" is logged with
level warning, and then if debug logging is enabled, the stack trace is
logged separately with level debug.
Log the message and the stack trace in the same call, so that they always
appear together in the output rather than potentially interleaved with
other log statements.
Change-Id: I1b5c1557ddc2d19f3f5b29baec96e62bc467d88a
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
* stable-4.4:
JGit v4.4.1.201607150455-r
RefDirectory: remove ref lock file for following ref dir removal
Change-Id: Ifc8a782efd7f2f991e70ad2a3691a8dba66c7554
Signed-off-by: David Pursehouse <david.pursehouse@gmail.com>
Gerrit's superproject subscription feature uses RefSpecs to formalize
the ACLs of when the superproject subscription feature is allowed.
As this is a slightly different use case than describing a local/remote
pair of refs, we need to be more permissive. Specifically we want to allow:
refs/heads/*
refs/heads/*:refs/heads/master
refs/heads/master:refs/heads/*
Introduce a new constructor, that allows constructing these RefSpecs.
Change-Id: I46c0bea9d876e61eb2c8d50f404b905792bc72b3
Signed-off-by: Stefan Beller <sbeller@google.com>
We had a case in Gerrits superproject subscriptions where
'refs/heads/' was configured with the intention to mean 'refs/heads/*'.
The first expression lacks the '*', which is why it is not considered
a wildcard but it was considered valid and so was not found early to be
a typo.
Refs are not allowed to end with '/' anyway, so add a check for that.
Change-Id: I3ffdd9002146382acafb4fbc310a64af4cc1b7a9
Signed-off-by: Stefan Beller <sbeller@google.com>
Example usage:
$ ./jgit push \
--push-option "Reviewer=j.doe@example.org" \
--push-option "<arbitrary string>" \
origin HEAD:refs/for/master
Stefan Beller has also made an equivalent change to CGit:
http://thread.gmane.org/gmane.comp.version-control.git/299872
Change-Id: I6797e50681054dce3bd179e80b731aef5e200d77
Signed-off-by: Dan Wang <dwwang@google.com>
What's invalidated when an object database is "dirty" is not the whole
database, but rather a specific list of packs. If there is a race
between getting the pack list and setting the volatile dirty flag
where the packs are rescanned, we don't need to mark the new pack list
as dirty.
This is a fine point that only really applies if the decision of
whether or not to mark dirty actually requires introspecting the pack
list (say, its timestamps). The general operation of "take whatever
is the current pack list and mark it dirty" may still be inherently
racy, but the cost is not so high.
Change-Id: I159e9154bd8b2d348b4e383627a503e85462dcc6
This variable has been populated and never used since it was
introduced in commit 5cf53fdacf
(Speed up clone/fetch with large number of refs, 2013-02-18).
Noted by FindBugs:
"BatchRefUpdate.java:359, UC_USELESS_OBJECT, Priority: Normal"
Change-Id: I7aacb49540aaee4a83db3d38b15633bb6c4773d0
Signed-off-by: Dan Wang <dwwang@google.com>
Currently, there is a race where a user of a DfsRepository in a single
thread may get unexpected MissingObjectExceptions trying to look up an
object that appears as the current value of a ref:
1. Thread A scans packs before scanning refs, for example by reading
an object by SHA-1.
2. Thread B flushes an object and updates a ref to point to that
object.
3. Thread A looks up the ref updated in (2). Since it is scanning refs
for the first time, it sees the new object SHA-1.
4. Thread A tries to read the object it found in (3), using the cached
pack list it got from (1). The object appears missing.
Allow implementations to work around this by marking the object
database's current pack list as "dirty." A dirty pack list means that
DfsReader will rescan packs and try again if a requested object is
missing. Implementations should mark objects as dirty any time the ref
database reads or scans refs that might be newer than a previously
cached pack list.
Change-Id: I06c722b20c859ed1475628ec6a2f6d3d6d580700
* stable-4.4:
Log if Repository.useCnt becomes negative
Time based eviction strategy for repository cache
Add method to read time unit from config
Align include.path max depth with native git
Config load should not fail on unsupported or nonexistent include path
Allow using JDK 7 bootclasspath when compiling JGit using Java 8
Extract work queue to allow reusing it
Change-Id: I6aeedb1cb8b0c3068af344a719c80a03ae68fc23
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
We observe in Gerrit 2.12 that useCnt can become negative in rare cases.
Log this to help finding the bug.
Change-Id: Ie91c7f9d190a5d7cf4733d4bf84124d119ca20f7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When Repository.close() decrements the useCount to 0 currently the cache
immediately evicts the repository from WindowCache and RepositoryCache.
This leads to I/O overhead on busy repositories because pack files and
references are inserted and deleted from the cache frequently.
This commit defers the eviction of a repository from the caches until
last use of the repository is older than time to live. The eviction is
handled by a background task running periodically.
Add two new configuration parameters:
* core.repositoryCacheExpireAfter: cache entries are evicted if the
cache entry wasn't accessed longer than this time in milliseconds
* core.repositoryCacheCleanupDelay: defines the interval in milliseconds
for running a background task evicting expired cache entries. If set to
-1 the delay is set to min(repositoryCacheExpireAfter, 10 minutes). If
set to 0 the time based eviction is switched off and no background task
is started. If time based eviction is switched off the JVM can still
evict cache entries if heap memory is running low.
Change-Id: I4a0214ad8b4a193985dda6a0ade63b70bdb948d7
Also-by: Matthias Sohn <matthias.sohn@sap.com>
Also-by: Hugo Arès <hugo.ares@ericsson.com>
Also-by: Sasa Zivkov <sasa.zivkov@sap.com>
These try-with-resources blocks close the underlying output stream
twice: once when closing the CountingOutputStream wrapper, then again
when closing the DfsOutputStream out.
Simplify by only closing the CountingOutputStream.
In practice this shouldn't matter because the close() method of a
Closable is required to be idempotent, but avoiding the redundant
extra close makes the code simpler to read and understand.
Change-Id: I1778c4fc8ba075a2c6cd2129528bb272cb3a1af7
If the client sent a well-formed enough request to see it wants to use
side-band-64k for status reporting (meaning its a modern client), but
any other command record was somehow invalid (e.g. corrupt SHA-1)
report the parsing exception using channel 3. This allows clients to
see the failure and know the server will not be continuing.
git-core and JGit clients send all commands and then start a sideband
demux before sending the pack. By consuming all commands first we get
the client into a state where it can see and respond to the channel 3
server failure.
This behavior is useful on HTTPS connections when the client is buggy
and sent a corrupt command, but still managed to request side-band-64k
in the first line.
Change-Id: If385b91ceb9f024ccae2d1645caf15bc6b206130
The "shallow $id" parsing can also throw InvalidObjectIdException,
just like parseCommand. Move it into its own method with a proper
try-catch block to convert to the checked PackProtocolException.
Change-Id: I6839b95f0bc4fbf4d2c213331ebb9bd24ab2af65
Instead of deferring until after command parsing, enable the
capabilities after the first pkt-line has been read from the client.
This allows the server to setup the side-band-64k channel immediately.
Change-Id: I141b7fc92e983a41d3a58da8e1464a6917422b6c
If the push client has requested side-band support the server can
signal a fatal error parsing the pack using the error channel (3)
and then hang up. This may cause the PackWriter to fail to write to
data onto the network socket, which throws a misleading error back
up to the application and the user.
During a write failure poll the input to see if the side band system
can parse out an error message off channel 3. This should be fast as
there will either be an error present in the buffer, or the remote will
also have hung-up on the side band channel. In the case of a hang-up
just rethrow the original IOException as its a network error.
This roughly matches what C git does; once commands are sent and the
packer is started a new thread runs in the background to decode any
possible server error during unpacking on the remote peer
Change-Id: Idb37a4a122a565ec4b59130e08c27d963ba09395
The more specific type InvalidObjectIdException is thrown by
ObjectId.fromString(). Use it here in ReceivePack as the more
generic IAE is never thrown by the body of the try-catch block.
Change-Id: I53fc13c561c7d429a50b5eb82773f1a670431c54
A RefAdvertiser writing to the network includes both the reference's
ObjectId and its peeled ObjectId in the advertised set. In smart HTTP
negotiation requests may bypass the RefAdvertiser and quickly build
the set based on current refs; include the peeled ObjectIds to match
behavior with the normal bidirectional protocols on git:// and SSH.
Change-Id: I5371bed60da36e8d12c4ad9a5c1d91a0f0ad486b
This field was being set twice within the block. Setting it just once
is sufficient. writeString() does not examine the field so it is fine
to set it after the call.
Change-Id: Ib4c74df4f1304e9df3015885bf360bf0d7bc6ca2
Example use case is to set a different IdentityRepository, for example,
a RemoteIdentityRepository to allow SSH Agent supplied credentials.
Change-Id: Id4a4afd64464e452ffe6d6ad49036f9e283b4655
Signed-off-by: markdingram <markdingram@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* changes:
Prune UNREACHABLE_GARBAGE packs when they expire
Use try-with-resources in DfsGarbageCollector.writePack
Fix lastModified to be consistent in DfsGarbageCollector
Add GC_REST PackSource to better order DFS packs
DfsGarbageCollector will now enforce a maximum time to live (TTL) for
UNREACHABLE_GARBAGE packs. The default TTL is 1 day, which should be
enough time to avoid races with other processes that are inserting
data into the repository.
Change-Id: Id719e6e2a03cfc9a0c0aef8ed71d261dda14bd0c
Signed-off-by: Mike Williams <miwilliams@google.com>
1f86350 added initial support for include.path. Relative path and path
with tilde are not yet supported but config load was failing if one of
those 2 unsupported options was encountered. Another problem was that
config load was failing if the include.path file did not exist.
Change the behavior to be consistent with native git. Ignore unsupported
or nonexistent include.path.
Bug: 495505
Bug: 496732
Change-Id: I7285d0e7abb6389ba6983e9c46021bea4344af68
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Set all packs written by the DfsGarbageCollector to use the same
starting timestamp as lastModified. This makes it easier to see
which packs came from the same DfsGarbageCollector run, as they
share the same timestamp.
Change-Id: Id633573fbc3f0f360887b4745cacf33d6fc09320
Force reads to use a search ordering of:
INSERT / RECEIVE
COMPACT
GC (heads)
GC_REST (non-heads)
GC_TXN (refs/txn)
UNREACHABLE_GARBAGE
This has provided decent performance for object lookups. Starting
from an arbitrary reference may find the content in a newer pack
created by DfsObjectInserter or a ReceivePack server. Compaction of
recent packs also contains newer content, and then most interesting
data is in the "main" GC pack. As the GC pack is self-contained (has
no edges leading outside) readers typically do not need to go further.
Adding a new GC_REST PackSource allows the DfsGarbageCollector to
identify to the pack ordering code which pack is which, so the
non-heads are scanned second during reads. This removes a hack that
was unique to Google's implementation that enforced this behavior by
fixing up the lastModified timestamp.
Renumber the PackSource's categories to reflect this search ordering.
Change-Id: I19fdaab8a8d6687cbe8c88488e6daa0630bf189a
Treewalk has a member 'attr' which caches the attributes for the current
entry. We did not reset the cache always when moving to next entry. The
effect was that when there are no attributes for an entry 'a' but 'a'
was skipped by a Treewalk filter then Treewalk stopped looking for
attributes until TreeWalk.next() was called again.
Change-Id: Ied39b7fb5f56afe7a237da17801003d0abe6b1c7
Problem occurs when the checkout wants to create a file 'd/f' but
the workingtree contains a dirty file 'd'. In order to create d/f the
file 'd' would have to be deleted and since the file is dirty that
content would be lost. This should lead to a CheckoutConflictException
for d/f when failOnConflict was set to true.
This fix also changes jgit checkout semantics to be more like native
gits checkout semantics. If during a checkout jgit wants to delete a
folder but finds that the working tree contains a dirty file at this
path then JGit will now throw an exception instead of silently keeping
the dirty file. Like in this example:
git init
touch b
git add b
git commit -m addB
mkdir a
touch a/c
git add a/c
git commit -m addAC
rm -fr a
touch a
git checkout HEAD~
Change-Id: I9089123179e09dd565285d50b0caa308d290cccd
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
Also-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
The native wire protocol sends ref advertisements in the pkt-line
format, which requires encoding the ObjectId and ref name onto a byte
sequence. Busy servers show this is a very high source of garbage,
which pushes the garbage collector harder when there are many refs in
the repository (e.g. 70k, in a Gerrit managed repository).
Optimize the side band advertiser by retaining the CharsetEncoder,
minimizing the amount of temporary garbage built during encoding.
Change-Id: I406c654bf82c1eb94b38862da2425e98396134cb
Before this fix, ref directory removal did not work. That was because
the ref lock file was still in the leaf directory at deletion time.
Hence no deep ref directories were ever deleted, which negatively
impacted performance under large directory structure circumstances.
This fix removes the ref lock file before attempting to delete the ref
directory (which includes it). The other deep parent directories are
therefore now successfully deleted in turn, since leaf's content
(lock file) gets removed first.
So, given a structure such as refs/any/directory[/**], this fix now
deletes all empty directories up to -and including- 'directory'. The
'any' directory (e.g.) does not get deleted even if empty, as before.
The ref lock file is still also removed in the calling block's finally
clause, just in case, as before. Such double-unlock brought by this
fix is harmless (a no-op).
A new (private) RefDirectory#delete method is introduced to support
this #pack-specific case; other RefDirectory#delete callers remain
untouched.
Change-Id: I47ba1eeb9bcf0cb93d2ed105d84fea2dac756a5a
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Git servers supporting HTTP transport can send multiple WWW-Authenticate
challenges [1] for different authentication schemes the server supports.
If authentication fails now retry all authentication types proposed by
the server.
[1] https://tools.ietf.org/html/rfc2617#page-3
Bug: 492057
Change-Id: I01d438a5896f9b1008bd6b751ad9c7cbf780af1a
Signed-off-by: Christian Pontesegger <christian.pontesegger@web.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
setInput should always push at least 1 byte into the Inflater. If 0
bytes (or negative!) are being sent the DfsBlock is inconsistent with
the position passed in. This indicates a severe programming problem
in the caller, and may cause an infinite loop in DfsReader.
Today we saw a handful of live examples of this but don't know what
the cause is. Guard against this error condition and throw with a
more verbose failure, which may prevent an infinite loop. Callers
will eventually catch DataFormatException and rethrow with more detail
about the object that cannot be inflated, with the DFE in the chain.
Change-Id: I64ed2a471520e48283675c6210c6db8a60634635
When using a DfsInserter for high-throughput insertion of many
objects (analogous to git-fast-import), we don't necessarily want to
do a random object lookup for each. It'll be faster from the
inserter's perspective to insert the duplicate objects and let a later
GC handle the deduplication.
Change-Id: Ic97f5f01657b4525f157e6df66023f1f07fc1851
* master:
Fix javadoc errors and unused imports introduced by ddd0fe25
RepoCommand: record manifest shallow recommendation in .gitmodules
RepoCommand: record manifest groups as submodule labels
Remove the deprecated TestRepository.getClock() method
Replace use of deprecated method Repository.getRef()
[findBugs] Prevent potential NPE in
FileLfsRepository.getOutputStream()
Better report on client side if push failed due to too large object
[findBugs] Prevent potential NPE in CloneCommand.init()
RepoCommand: remove --record-remote-branches
RepoCommandTest: Improve assertion message for remote branch recording
Change-Id: I4fbce4f84925a933fcc9a48058ed6793f5821b97
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Git core learned about the submodule.<name>.shallow option in
.gitmodules files, which is a recommendation to clone a submodule
shallow. A repo manifest may record a clone depth recommendation as
an optional field, which contains more information than a binary
shallow/nonshallow recommendation, so any attempted conversion may be
lossy. In practice the clone depth recommendation is either '1' or doesn't
exist, which is the binary behavior we have in Git core.
Change-Id: I51aa9cb6d1d9660dae6ab6d21ad7bae9bc5325e6
Signed-off-by: Stefan Beller <sbeller@google.com>
Git core learned about attributes in pathspecs:
pathspec: allow querying for attributes
The pathspec mechanism is extended via the new
":(attr:eol=input)pattern/to/match" syntax to filter paths so that it
requires paths to not just match the given pattern but also have the
specified attrs attached for them to be chosen.
(177161a5f7, 2016-05-20)
We intend to use these pathspec attribute patterns for submodule
grouping, similar to the grouping in repo. So the RepoCommand which
translates repo manifest files into submodules should propagate this
information along. This requires writing information to the
.gitattributes file instead of the .gitmodules file. For now we just
overwrite any existing .gitattributes file and do not care about prior
attributes set. If this becomes an issue we need to figure out how to
correctly amend the grouping information to an existing .gitattributes
file.
Change-Id: I0f55b45786b6b8fc3d5be62d7f6aab9ac00ed60e
Signed-off-by: Stefan Beller <sbeller@google.com>
JGits PushCommand and BasePackPushConnection were throwing a generic
exception when the pushed pack-file was rejected by the server since it
contained too large objects. Teach JGit to better analyze the server's
response to detect this situation and throw a more specific exception.
Detect this situation by parsing the status line sent by the server.
This change only recognizes the response sent by a JGit based server.
All other servers which report such problems in a different way still
lead to a generic TransportExceptions.
Also see https://git.eclipse.org/r/#/c/46348/
Change-Id: I8d6d65e4585ebb3846f7207e7d1a2f82fa9cbd86
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
File.listFiles() returns null if the File is not a directory, improve
validation of directory and gitDir to fix this.
Change-Id: I763d08835faf96a0beb8e706992df0908526bd2c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* master:
JGit CLI: allow to call git init with specific directory
Redirect all Show output to outs
Support git config [include] section with absolute path(s)
Added filter for merge and non-merges commits.
[findBugs] Prevent potential NPE in FS_POSIX.readUmask()
[findBugs] Fix calculation of host header in SignerV4
Update Orbit repository to S20160518051658 for Neon RC2
Fix StashApply regarding handling of untracked files
GC should not pack objects only referenced by ORIG_HEAD,...
Make sure to overwrite files when "reset --hard" detects conflicts
Allow setting FileMode to executable when applying patches in
ApplyCommand
Fix config value get to return last instead of 1st just like git
Remove UTF-8 checking duplication in Config lib subclasses
Update Maven plugins
Fix type parameter in javadoc in TestRepository.delete(String ref)
TestRepository: Add delete() method
Make BaseReceivePack.setAtomic public
ReceivePack: Pass atomic setting from client to BatchRefUpdate
Change-Id: I5c9c5b7ccb23fb48b44b3da10b2c5d876d043d24
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.3:
Fix computation of id in WorkingTreeIterator with autocrlf and
smudging
Prepare 4.3.2-SNAPSHOT builds
JGit v4.3.1.201605051710-r
Scan loose ref before packed in case gc about to remove the loose
Fix possible NPEs when reporting transport errors
Fix calling of clean/smudge filters from Checkout,MergeCommands
Fix ApplyCommand when result of patch is an empty file
Change-Id: I829f06699f6670e519d04c927bdba4b82df29199
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit failed to do checkouts when the index contained smudged entries and
autocrlf was on. In such cases the WorkingTreeIterator calculated the
SHA1 sometimes on content which was not correctly filtered. The SHA1 was
computed on content which two times went through a lf->crlf conversion.
We used to tell the treewalk whether it is a checkin or checkout
operation and always use the related filters when reading any content.
If on windows and autocrlf is true and we do a checkout operation then
we always used a lf->crlf conversion on any text content. That's not
correct. Even during a checkout we sometimes need the crlf->lf
conversion. E.g. when calculating the content-id for working-tree
content we need to use crlf->lf filtering although the overall operation
type is checkout.
Often this bug does not have effects because we seldom compute the
content-id of filesystem content during a checkout. But we do need to
know whether a file is dirty or not before we overwrite it during a
checkout. And if the index entries are smudged we don't trust the index
and compute filesystem-content-sha1's explicitly.
This caused EGit not to be able to switch branches anymore on Windows
when autocrlf was true. EGit denied the checkout because it thought
workingtree files are dirty because content-sha1 are computed on wrongly
filtered content.
Bug: 493360
Change-Id: I1072a57b4c529ba3aaa50b7b02d2b816bb64a9b8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
As per [1], but limited to absolute paths indeed. No support yet for
tilde or $HOME expansion. Support for the --[no-]includes options
([1]) is not part of this commit scope either, but those options'
defaults are in effect as described in [1].
[1] https://git-scm.com/docs/git-config
Included path can be a config file that includes other path-s in turn.
An exception is thrown if too many recursions (circular includes)
happen because of ill-specified config files.
Change-Id: I700bd7b7e1625eb7de0180f220c707d8e7b0930b
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Added the option to retrieve either merge or non-merge commits in the
LogCommand.
Change-Id: Ie0e1c515a823f2392783f1a47d385c31230e8167
Signed-off-by: Alcemir Santos <alcemir.santos@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
BufferedReader.readLine() returns null if the end of the stream has been
reached.
Change-Id: I83102bbfb1316407247e0f29023077af9e8d9606
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There was a bug regarding how JGit handled untracked files when applying
a stash. Problem was that untracked files are applied by doing a merge
of HEAD and untrackedFiles commit with a merge base of the stashed HEAD.
That's wrong because the untrackedFiles commit has no parent and
contains only the untracked files. Using stashed HEAD as merge base
leads to unneccessary conflicts on files not event included in the
untrackedFiles commit.
Imagine this graph directly before you want to apply a stash which was
based on 0. You want to apply the stash on current HEAD commit 5.
5 (HEAD,master)
/
0---+
\ \
1---3 (WIP on master)
/
2 (untracked files on master)
Imagine for a specific (tracked) file f
- commit 0 contains X
- HEAD contains Y
- commit 2 (the untracked files) does not contain file f
A merge of 2 and 5 with a merge base of 0 leads to a conflict. The 5
commit wants to modify the file and the 2 commit wants to delete the
file -> conflict.
If no merge base is set then the semantic is correct.
Thanks to Bow for finding this bug and providing the test case.
Bug: 485467
Change-Id: I453fa6ec337f81b2a52c4f51f23044faeec409e6
Also-by: Bow Ruggeri <bow@bow.net>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
There are references which are returned by
RefDatabase.getAdditionalRefs() which are allowed to point to
non-existing objects. These refs should not save objects from being
garbage collected. Examples for these references are ORIG_HEAD,
MERGE_HEAD, FETCH_HEAD and CHERRY_PICK_HEAD. Native git will not take
these references into account when doing a gc and therefore these
references may point to non-existing objects after a gc. Teach JGit's
GC to behave the same: ignore additional refs if they don't start with
"refs/". Examples for refs returned by getAdditionalRefs() which do
start with "refs/" are the bootstrap refs when using reftree's (see
commit 115f1ad397). See also
http://article.gmane.org/gmane.comp.version-control.git/294126.
Bug: 479697
Change-Id: I10e40589f13e72aacdd9f86f3b44696fd1cd068a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When performing a "reset --hard" a checkout is done. The pathes are
checked for potential checkout conflicts. But in the end for all
remaining conflicts these files are simply deleted from the working
tree. That's not the right strategy to handle checkout conflicts during
"reset --hard". Instead for every conflict we should simply checkout the
merge commit's content.
This is different from native gits behavior which reports errors when
during a "checkout --hard" a file shows up where a folder was expected.
"warning: unable to unlink d/c.txt: Not a directory"
Why it is like that in native git was asked in
http://permalink.gmane.org/gmane.comp.version-control.git/279482. Unless
it is explained why native git why this error is reported JGit should
overwrite the files.
Bug: 474842
Change-Id: I08e23822a577aaf22120c5137eb169b6bd08447b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
git-apply allows modifying file modes in patched files using either
"new mode" or "new file mode" headers. This patch adds support for
setting files as executables and vice-versa.
Change-Id: I24848966b46f686f540a8efa8150b42e0d9c3ad1
Signed-off-by: Nadav Cohen <nadavcoh@gmail.com>
Before this fix, getting the value of 'key' below used to return
value1. This fix makes it so that value3 gets returned instead,
just like native git's get.
[section]
key = value1
key = value2
key = value3
Change-Id: Iccb24de9b63c3ad8646c909494ca3f8c9ed6e29c
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Change-Id: Ib9f0ae8207000a36c5bf1a92fcc2c32efc4c0984
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.3:
Scan loose ref before packed in case gc about to remove the loose
Fix possible NPEs when reporting transport errors
Fix calling of clean/smudge filters from Checkout,MergeCommands
Fix ApplyCommand when result of patch is an empty file
Change-Id: I0dc76b7a8c87ce8e0386a1b9e0fa92a3aa62abf7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Before this change, jgit used to read packed-refs before scanning
loose refs. That was not a problem if gc didn't run concurrently. When
gc did run concurrently with such refs reading, that order sometimes
broke the latter. This lead to reading an older version of a ref's
tip, which meant "losing" the real tip or commit. The specific
read-Vs-gc concurrency scenario which broke reading that way follows:
1. let ref R be in packed-refs and R' be in loose
2. jgit starts reading packed-refs
3. gc also starts its business around that very time
4. jgit still has the time to read R from packed-refs
5. as gc is not done yet updating packed-refs with R'
6. jgit then starts scanning loose refs (or is about to)
7. gc quickly ends up being done moving loose R' to packed-refs
8. so gc (quickly) removes loose refs
9. -while jgit is scanning loose refs, now gone
10. so jgit assumes no loose to consider => packed-refs winning
11. so jgit wrongfully returns R (from 4.) as the tip, instead of R'.
This fix switches the order so loose refs are scanned (secured) before
taking the time to read packed-refs. This way, knowledge of the
likelier tip is guaranteed for ref reading to return the true tip
- despite concurrent gc. If there is no loose ref to scan, jgit reads
packed-refs and lands on R' (or S), which it then returns, as
expected. The gerrit issue [1] should be solved by this fix.
[1] https://code.google.com/p/gerrit/issues/detail?id=2302
Change-Id: Ibd120120a361a3a6ed565f3836afc1db706fbcdd
Signed-off-by: Marco Miller <marco.miller@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The special characters <> and '\n' interfere with parsing of
identities. C git strips these special characters, so we should too.
Rather than allocating extra strings by calling String#trim(), add a
few lines to our sanitization method to perform the same trimming as
described in String's Javadoc.
Change-Id: I96edcb93a2fc194ee354d60566d352299742a52f
This might be somewhat surprising behavior to users who might
naturally assume the following invariant:
ident.equals(parseIdent(ident.toExternalString()))
This invariant does not hold since whitespace is only trimmed during
serialization. We don't want to mess with the strings during
initialization, as this is called during the highly-optimized commit
parsing codepath.
Change-Id: I081a603f0ac0e33167462244779b0ff3ad51e80c
There was a bug in JGit which caused NPEs being thrown when Transport
errors should be reported. Avoid the NPE to let the original error show
up.
Change-Id: I9e1e2b0195bd61b7e531a09d0fc7bce109bd6515
We've found in Gerrit Code Review that it is common to pass around
both an ObjectReader (or more commonly a RevWalk wrapping one) and an
ObjectInserter. These code paths often assume that the ObjectReader
can read back any objects created by the ObjectInserter without
flushing. However, we previously had no way to enforce that constraint
programmatically, leading to hard-to-spot problems.
Provide a solution by exposing the ObjectInserter that created an
ObjectReader, when known. Callers can either continue passing both
objects and check:
reader.getCreatedFromInserter() == inserter
or they can just pass around ObjectReader and extract the inserter
when it's needed (checking that it's not null at usage time).
Change-Id: Ibbf5d1968b506f6b47030ab1b046ffccb47352ea
When CheckoutCommand or MergeCommand is called then not in all situation
the treewalks have been prepared to support clean/smudge filters. Fix
this
Bug: 491505
Change-Id: Iab5608049221c46d06812552ab97299e44d59e64
Repurpose RefDatabase#performsAtomicTransactions() slightly, to
indicate that the backend _supports_ atomic transactions, rather than
the current definition, which is that the backend always _uses_ atomic
transactions regardless of whether or not the caller actually wants
them. Allow BatchRefUpdate callers to turn off atomic transactions by
calling setAtomic(false). Defaulting to true means this is backwards
compatible.
Change-Id: I6df78d7df65ab147b4cce7764bd3101db985491c
Such hunks are identifiable by a zero value for "new start line". Prior
to the fix, JGit throws and ArrayIndexOutOfBoundsException on such
patches.
Change-Id: I4f3deb5e5f41a08af965fcc178d678c77270cddb
Signed-off-by: Jonathan Schneider <jkschneider@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Now if refs are unreadable when serving an upload pack the handler
will fail due to the actual underlying failure. Previously all wants
would be rejected as invalid because Repository.getAllRefs() returned
an empty map.
Testing this required a new subclass of InMemoryRepository so that
an IOException could be injected at the correct time.
Signed-off-by: Michael Edgar <adgar@google.com>
Change-Id: Iac708b1db9d0ccce08c4ef5ace599ea0b57afdc0
Change-Id: I5b3b7b0633354d5ccf0c6c320c0df9c93fdf8eeb
Signed-off-by: Ned Twigg <ned.twigg@diffplug.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
CommitCommand already provided a method to set the comment which should
be written into the reflog. The underlying RefUpdate class supported to
skip writing a reflog entry. But through the CommitCommand API it was
not possible to prevent writing a reflog entry. Fix this and allow
creating commits which don't occur in the reflog.
Change-Id: I193c53de71fb5958ea749c4bfa8360a51acc9b58
PackWriter.writeObject() can get into an infinite loop when corrupt
packs are present. When it finds a pack file with an object that can be
reused it calls DfsPackFile.copyAsIs(). If that method sees an invalid
CRC, it adds the object to the DfsPackFile's corrupt object list and
throws a CorruptObjectException, which it later catches as an
IOException and wraps in a
StoredObjectRepresentationNotAvailableException.
PackWriter.writeObjectImpl() catches that SORNAE and retries the
operation by calling DfsReader.selectObjectRepresentation(). But
currently that method returns the same object which was just seen to
be corrupt.
Change DfsPackFile.isCorrupt() from private to package private, and use
that method in DfsReader.selectObjectRepresentation() to filter out
corrupt objects.
The stack traces that show the problem are:
org.eclipse.jgit.errors.CorruptObjectException.<init>(CorruptObjectException.java:113)
org.eclipse.jgit.internal.storage.dfs.DfsPackFile.copyAsIs(DfsPackFile.java:624)
org.eclipse.jgit.internal.storage.dfs.DfsReader.copyObjectAsIs(DfsReader.java:491)
org.eclipse.jgit.internal.storage.pack.PackWriter.writeObjectImpl(PackWriter.java:1478)
org.eclipse.jgit.internal.storage.pack.PackWriter.writeObject(PackWriter.java:1455)
org.eclipse.jgit.internal.storage.dfs.DfsPackFile.getPackIndex(DfsPackFile.java:228)
org.eclipse.jgit.internal.storage.dfs.DfsReader.findAllFromPack(DfsReader.java:476)
org.eclipse.jgit.internal.storage.dfs.DfsReader.selectObjectRepresentation(DfsReader.java:455)
org.eclipse.jgit.internal.storage.pack.PackWriter.writeObjectImpl(PackWriter.java:1492)
org.eclipse.jgit.internal.storage.pack.PackWriter.writeObject(PackWriter.java:1455)
Change-Id: Iad7bbcaed1f11a6aa3b4f5af911a73a34c0fabfd
Signed-off-by: Terry Parker <tparker@google.com>
RepositoryCache has 2 methods to remove a repository from the cache but
they are never called when a repository is closed. Users of the cache
were expected to call one of those 2 methods but how could they have
called them at proper time without having visibility of the repository
usage count.
Ideally, I would have reworked the RepositoryCache to wrap any
repository it opens in a class that would be responsible to unregister
them from the cache when it's really closed, i.e. when usage counter
reaches 0. The problem preventing the wrapping solution is the
RepositoryCache.register method that allows to register an already
opened repository in the cache. Such repositories cannot be wrapped
because callers are still holding a reference on the unwrapped
repository.
Document that RepositoryCache.close method is removing the repository
from the cache as well as closing it and rework
RepositoryCache.unregister method to only remove the repository from the
cache. Use the latter to unregister repository when Repository.doClose
is getting executed.
Change-Id: Ia364816e4da8d7b6cfa72f10758ca31aa8a1f9db
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When repositories are opened using the RepositoryCache, they are kept in
memory and when the repository usage counter reaches 0, the
Repository.close method is called which then calls close method on its
reference and object databases.
The problem is that RefDirectory.close method was a no-op and the
reference database was kept in memory. This problem is only happening
when opening a repository using the RepositoryCache because it never
evicts repositories, it's just calling the close method.
Change-Id: Iacb961de8e8b1f5b37824bf0d1a4caf4c6f1233f
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
Repository has a usage counter that is initialized to 1 at
instantiation and this counter is decremented when Repository.close
method is called. There is also a Repository.incrementOpen method that
RepositoryCache uses to increment the usage count when it's returning a
repository that is already opened.
The problem was that RepositoryCache was incrementing the usage count
for repositories that it just opened or registered. The usage count was
2 when it should have been 1.
Incrementing usage count is now only be done for repository that are
served from the cache.
This bug is causing slow memory increase of our Gerrit server until the
server become slow. Even if the RepositoryCache is using SoftReference,
it seems that the JVM is not garbage collecting the repositories because
it's not yet on the edge of being out of memory.
To test this change, I replicated all repositories(11k) from Gerrit
master to one slave. The Gerrit master used memory after this test was
10GB without this change and 3.5GB with.
Change-Id: I86c7b36174e384f106b51fe92f306018fd1dbdf0
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
* master:
Add config parameter gc.prunePackExpire for packfile expiration
In TestRepository, use a consistent clock
Change-Id: I7ac568e650fbd191e48a8f1a4068af72deb242e8
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When checking out commits/branches JGit was triggering correctly
configured smudge filters. But when checking out paths (either from
index or from commits) JGit was not triggering smudge filters. Fix
CheckoutCommand to properly call filters.
Bug: 486560
Also-by: Pascal Krause <pascal.krausek@sap.com>
Change-Id: I5ff893054defe57ab12e201d901fe74e1376efea
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implement the DIR_NO_GITLINKS setting with the same functionality
it provides in cGit.
Bug: 436200
Change-Id: I8304e42df2d7e8d7925f515805e075a92ff6ce28
Signed-off-by: Preben Ingvaldsen <preben@puppetlabs.com>
JGit's Garbage Collector is repacking relevant objects into new
packfiles and is afterwards deleting the now obsolete packfiles. But to
prevent problems caused by race conditions JGit was not deleting
packfiles when they are too young. The same mechanism as for loose
objects and the config parameter gc.pruneExpire was used.
But JGit was reusing the parameter gc.pruneExpire also for packfiles
which may cause a lot of filesystem consumption if gc.pruneExpire was
set to the default of 2 weeks. Only two weeks after packfile creation gc
was allowed to delete this packfile.
This change introduces a new config paramter gc.prunePackExpire with a
default of "1.hour". This parameter is used when packfiles are deleted.
Only packfiles older than the specified time can be deleted.
For loose objects the behaviour is not changed and only the old
parameter gc.pruneExpire is relevant.
Change-Id: I6209efb05678b15153bd22479dc13486907a44f8
This change replaced some tabs with spaces introduced in
change I8b3765713599e34f1411f9bbc7f575ec7c2384e0.
Change-Id: Ia5c23b38c9fbbb46f150e527347b61c64c8d9e87
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
With ignoreRemoteFailures set to true, we can ignore remote failures
(e.g. the branch of a project described in the manifest file does not
exist), skip that project and continue to the next one, instead of fail
the whole operation.
Change-Id: I8b3765713599e34f1411f9bbc7f575ec7c2384e0
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
This commit introduces a FileModeStrategy to
the FileTreeIterator class. This provides a way to
allow different modes of traversing a file tree;
for example, to control whether or not a nested
.git directory should be treated as a gitlink.
Bug: 436200
Change-Id: Ibf85defee28cdeec1e1463e596d0dcd03090dddd
Signed-off-by: Preben Ingvaldsen <preben@puppetlabs.com>
Allow access to the ObjectId of a DirCacheTree if known for low level
integration code.
Change-Id: I6f05b10c9ac781f5e8b38af4a19e653313c91fa8
Signed-off-by: Philipp Marx <smigfu@googlemail.com>
TreeWalk provides the new method getEolStreamType. This new method can
be used with EolStreamTypeUtil in order to create a wrapped InputStream
or OutputStream when reading / writing files. The implementation
implements support for the git configuration options core.crlf, core.eol
and the .gitattributes "text", "eol" and "binary"
CQ: 10896
Bug: 486563
Change-Id: Ie4f6367afc2a6aec1de56faf95120fff0339a358
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The reason is that URIish(URL) and URIish(String) make different parsing
of path / rawPath with regard to drive letters. /C:/... for URL and
C:/... for String. This patch fixes the issue.
Change-Id: I8e2013fff30b7bb198ff733c038e21366667b8a0
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
Capture the internal "want X not valid" state as a specific subclass
of PackProtocolException, allowing this to be more easily identified
in server stack traces and wrapper application code.
Change-Id: I4b1adb7497f396432da420b0f600ad25a261f912
If the client sends a SHA-1 that the server does not recognize echo
this back to the client with an explicit error message instead of
the generic "internal server error".
This was always the intent of the implementation but it was being
dropped on smart HTTP due to the UploadPackServlet catching the
PackProtocolException, discarding the buffered message UploadPack
meant to send, and sending along a generic message instead.
Change-Id: I8d96b064ec655aef64ac2ef3e01853625af32cd1
* stable-4.2:
Don't use deprecated LockFile constructor
Fix warnings about unchecked conversion of MergeResult
MockServletConfig: Fix warning about unchecked conversion of Enumeration
HugeFileTest: Make Git a class member and open in try-with-resource
Suppress "unchecked cast" warnings related to UploadPackFactory.DISABLED
DiffAlgorithms: Fix warnings about variable hiding
DirCacheBasicTest: Open ObjectInserter.Formatter in try-with-resource
DirCacheBuilderIteratorTest: Open TreeWalk in try-with-resource
DirCacheCGitCompatabilityTest: Open TreeWalk in try-with-resource
DirCacheCheckoutMaliciousPathTest: Open Git and RevWalk in t-w-r
DirCacheIteratorTest: Open TreeWalk instances in try-with-resource
ForPathTest: Open TreeWalk in try-with-resource
GitConstructionTest: Open Git instance in try-with-resource
IndexDiffTest: Open Git instances in try-with-resources
ManifestParserTest: Don't use deprecated StringBufferInputStream
InMemoryRepository: Remove unused RevWalk from batch method signature
IndexModificationTimesTest: Open Git instances in try-with-resource
InterIndexDiffFilterTest: Open TreeWalk in try-with-resource
LockFileTest: Open Git instance in try-with-resource
JGit v4.1.2.201602141800-r
MergeCommandTest: Use JUnit's assume to check preconditions
MergeCommandTest: Open Git instances in try-with-resource
Change-Id: Ie5dba6b9132a29e86958a04fa2b76465bcd2c6b5
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The RevWalk given in the arguments is not used. According to the
comment at the top of the method, a new RevWalk is intentionally
used in the implementation.
Remove the unused argument.
Change-Id: Iec81a1341d5bf377801475845b96a465753096ef
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Attributes MacroExpander implements macros used in git attributes. This
is implemented inside the TreeWalk using a lazy created MacroExpander.
In addition, the macro expander caches the global and info attributes
node in order to provide fast merge of attributes.
Change-Id: I2e69c9fc84e9d7fb8df0a05817d688fc456d8f00
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
* stable-4.2:
RepoProject: Fix warnings about variable hiding
RepoTest: Open Git in try-with-resources
RepositoryResolveTest: Open Git in try-with-resource
RepositoryTestCase: Open autocloseable types in try-with-resource
ResetCommandTest: Use Git member in testHardResetAfterSquashMerge
ResolveMergerTest: Open Git in try-with-resource
RevCommitListTest: Open Git and RevWalk in try-with-resource
RevCommitParseTest: Open ObjectInserter.Formatter in try-with-resource
RevObjectTest: Open RevWalk in try-with-resource
RevTagParseTest: Open ObjectInserter.Formatter in try-with-resource
RevertCommandTest: Open Git in try-with-resource
SquashMessageFormatterTest: Open git in try-with-resource
StatusCommandTest: Open Git in try-with-resource
SubmoduleAddTest: Open Git in try-with-resource
SymlinksTest: Open git and TreeWalk in try-with-resource
T0003_BasicTest: Open autocloseable types in try-with-resource
TextHashFunctions: Fix warnings about variable hiding
TreeFilterTest: Open TreeWalk in try-with-resource
TreeWalkJava7Test: Open TreeWalk in try-with-resource
Fix diff for added and removed submodule
Change-Id: If3ecc63f6dfac55474d3c1dd2f4105371f3d24fb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.1:
Fix diff for added and removed submodule
Change-Id: I37dd71ed19b06e9bbcffe37370081ab875c6d8d4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Method parameter names were hiding class members of the same
name.
Change-Id: I182f2715894ac4259b09a371cb4e0eb24f52518a
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
The disableSslVerify method will be used in the follow up change.
Change-Id: Ie00b5e14244a9a036cbdef94768007f1c25aa8d3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Implement LfsProtocolServlet handling the "Git LFS v1 Batch API"
protocol [1]. Add a simple file system based LFS content store and the
debug-lfs-store command to simplify testing.
Introduce a LargeFileRepository interface to enable additional storage
implementation while reusing the same protocol implementation.
At the client side we have to configure the lfs.url, specify that
we use the batch API and we don't use authentication:
[lfs]
url = http://host:port/lfs
batch = true
[lfs "http://host:port/lfs"]
access = none
the git-lfs client appends the "objects/batch" to the lfs.url.
Hard code an Authorization header in the FileLfsRepository.getAction
because then git-lfs client will skip asking for credentials. It will
just forward the Authorization header from the response to the
download/upload request.
The FileLfsServlet supports file content storage for "Large File
Storage" (LFS) server as defined by the Github LFS API [2].
- upload and download of large files is probably network bound hence use
an asynchronous servlet for good scalability
- simple object storage in file system with 2 level fan-out
- use LockFile to protect writing large objects against multiple
concurrent uploads of the same object
- to prevent corrupt uploads the uploaded file is rejected if its hash
doesn't match id given in URL
The debug-lfs-store command is used to run the LfsProtocolServlet and,
optionally, the FileLfsServlet which makes it easier to setup a
local test server.
[1]
https://github.com/github/git-lfs/blob/master/docs/api/http-v1-batch.md
[2] https://github.com/github/git-lfs/tree/master/docs/api
Bug: 472961
Change-Id: I7378da5575159d2195138d799704880c5c82d5f3
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Signed-off-by: Sasa Zivkov <sasa.zivkov@sap.com>
The Large File Storage extension specified by GitHub [1] uses SHA-256 to
compute the ID of large files stored by the extension. Hence implement a
SHA-256 abstraction similar to the SHA-1 abstraction used by JGit.
[1] https://git-lfs.github.com/
Bug: 470333
Change-Id: I3a95954543c8570d73929e55f4a884b55dbf1b7a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Since If13f7b406, submodule difference are shown as a hunk. The issue
was that added and removed submodule were considered as Edit.REPLACE
instead of Edit.INSERT and Edit.DELETE in the DiffFormatter result.
Change-Id: I4330c2aa3f10e29d7d6b0b2e5286e59293a06239
Signed-off-by: Hugo Arès <hugo.ares@ericsson.com>
* stable-4.2:
DirCacheCheckoutTest: Open Git and TreeWalk in try-with-resource
CommitCommand: Remove declaration of unthrown exception
Branch: Fix variable hiding warning
ApplyCommandTest: Open Git in try-with-resource
PackFileTest: Open ObjectInserter.Formatter in try-with-resource
Change-Id: I8484b10fad5a4c35fcfaedc1cdf8ccf97471618e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Repo manifest file allows revision attribute in <remote> tag. This change
teaches JGit to read that information.
Change-Id: I1c878a2505b9d09fa09fbd404a119b71f2fb8fdb
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Monitoring progress of merges can be useful for users for large
repositories or complex merge processes that take some time.
This enables setting a monitor. Existing merge implementations in jgit
do not yet report progress if a monitor is set. This will be added in a
later change.
Change-Id: I17b978b3fc91750dd88649638b90a46820a0877c
Signed-off-by: Laurent Delaigue <laurent.delaigue@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When reading a bundle file, commit messages who's oneline format is
longer than 982 characters caused JGit to treat subsequent text in
the commit as a SHA, then throw a TransportException because it's
not a valid SHA.
Now the readLine method will read all the way to the end of the
line, not just the first 1024 characters of it.
Change-Id: If15b491aa9a1e4fd9b8bbed2dd9e6be47a64ccb7
Signed-off-by: Chris Gavin <chris@chrisgavin.me>
Monitoring progress of merges can be useful for users for large
repositories or complex merge processes that take some time.
This enables setting a monitor. Existing merge implementations in jgit
do not yet report progress if a monitor is set. This will be added in a
later change.
Change-Id: I17b978b3fc91750dd88649638b90a46820a0877c
Signed-off-by: Laurent Delaigue <laurent.delaigue@obeo.fr>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When reading a bundle file, commit messages who's oneline format is
longer than 982 characters caused JGit to treat subsequent text in
the commit as a SHA, then throw a TransportException because it's
not a valid SHA.
Now the readLine method will read all the way to the end of the
line, not just the first 1024 characters of it.
Change-Id: If15b491aa9a1e4fd9b8bbed2dd9e6be47a64ccb7
Signed-off-by: Chris Gavin <chris@chrisgavin.me>
* changes:
debug-rebuild-ref-tree: Copy HEAD into RefTree
debug-rebuild-ref-tree: Add --enable flag to turn the database on
RefTreeDatabase: Allow ORIG_HEAD, etc. on non-bare repositories
RefTreeDatabase: Expose bootstrap refs in getAdditionalRefs
* changes:
daemon: Add --ketch=LEADER flag
Ketch: Intercept push and route it through Ketch
Ketch: Simple map of running leader instances
Ketch: Basic replication system
This form of addTree() does not parse any objects and cannot throw the
declared checked exception. Callers are being forced to try-catch
CorruptObjectException that cannot occur when the iterator instance
has already been constructed.
Change-Id: Id338035302903bab81569d1576eab063eee0885a
ResetCommand was not returning the updated ref as a result of the call()
method. Since the ResetCommand is always updating the same ref (HEAD)
this should always be the HEAD ref.
Bug: 440750
Change-Id: I7974975c3ab05e68c208384e69cf0692ded6e8db
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
CommitCommand should allow to specify whether empty commits (commits
having the same tree as the sole predecessor commit) are allowed or not.
Similar to native git's "--allow-empty" flag.
The defaults differ between JGit and native git even after this change.
When not specifying paths then by default JGit allows to create empty
commits while native git does not. It would be API breaking to change
this now.
Bug: 460301
Change-Id: I88feb0c3ffb2c686b1d0594e669729b065cda4cb
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Experimental flag to turn on the KetchLeader within this daemon JVM.
This is a manually elected leader process, set from the command line.
Remote followers for each repository are configured per-repository
using remote sections with ketch-type = FULL. For example:
Manually elected leader's $GIT_DIR/config:
[ketch]
name = A
[remote "A"]
ketch-type = FULL
[remote "B"]
url = git://127.0.0.1:9421/sample.git
ketch-type = FULL
[remote "C"]
url = git://127.0.0.1:9422/sample.git
ketch-type = FULL
Replica B and C daemons:
git daemon \
--export-all \
--enable=receive-pack \
--listen=127.0.0.1 --port=9421 \
--base-path=$HOME/ketch_test/follower_one \
$HOME/ketch_test/follower_one &
git daemon \
--export-all \
--enable=receive-pack \
--listen=127.0.0.1 --port=9422 \
--base-path=$HOME/ketch_test/follower_two \
$HOME/ketch_test/follower_two &
Change-Id: I165f85970a77e16b5263115290d685d8a00566f5
Git Ketch is a multi-master Git repository management system. Writes
are successful only if a majority of participant servers agree. Acked
writes are durable against server failures as a majority of the
participants store all required objects.
Git Ketch is modeled on the Raft Consensus Algorithm[1]. A ketch
sailing vessel is faster and more nimble than a raft. It can also
carry more source codes.
Git Ketch front-loads replication costs, which vaguely resembles a
ketch sailing vessel's distinguishing feature of the main mast on the
front of the ship.
[1] https://raft.github.io/
Change-Id: Ib378dab068961fc7de624cd96030266660b64fb4
This could have only happened during the getBytes call. Instead, use
Constants.encode, which is a non-throwing implementation.
This change is binary compatible with existing code compiled against
older versions of JGit, although it might break compilation of
previously compiling code due to dead catch blocks.
Change-Id: I191fec5cac718657407230de141440e86d0151fb
After creating a Transport instance callers should always call
its close() method. Use AutoCloseable to document this idiom
and allow use of try-with-resources.
Change-Id: I0c6ff3e39ebecdd7a028dbcae1856a818937b186
* changes:
Ignore API errors about Tree, TreeEntry, FileTreeEntry and friends being removed
Revert "Revert "Remove deprecated Tree, TreeEntry, FileTreeEntry and friends""
If one or more commands is failing the entire group usually has to
also fail with "transaction aborted". Pull this loop into a helper
so the idiom can be easily reused in several places throughout JGit.
Change-Id: I3b9399b7e26ce2b0dc5f7baa85d585a433b4eaed
Store these in the bootstrap layer where they are using $GIT_DIR
as the storage directory for any reference that does not contain '/'.
Change-Id: I5595bf514e4475b7c7e799c2c79446597a3abb4a
By showing the bootstrap layer in getAdditionalRefs() garbage
collector code can be more RefDatabase agnostic and not care about
the special case of RefTree and RefTreeNames for the purposes of
building up the roots to GC. Instead they can combine getRefs(ALL)
and getAdditionalRefs() and have a clean set of roots.
Change-Id: I665cd2456e9316640215b6a08bc728d1356f36d8
Repository.getWorkTree is annotated as @NonNull, so the check
for it returning null is redundant.
Change-Id: I597b0f774ff857b8900519f14a1a17a904cf7c6f
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Require callers to pass in valid sets for both want and have
collections. Offer PackWriter.NONE as a handy constant for an
empty collection for the have part of preparePack instead of null.
Change-Id: Ifda4450f5e488cbfefd728382b7d30797e229217
The RefTree graph needs to be quickly accessed to read references.
It is also distinct graph disconnected from the rest of the
repository. Store the commit and tree objects in their own pack.
Change-Id: Icbb735be8fa91ccbf0708ca3a219b364e11a6b83
git-core just rerolled the extensible backends series with refsStorage
as the configuration key. Update JGit to match git-core.
Change-Id: If345a2403a996e358b29cfa2a2298f6e8d59d96b
Using ^{} as the peel suffix has caused problems when projects used
tags like v2.1 and then v2.1.1, v2.2.2, etc. The peeled value for
v2.1 was stored very far away in the tree relative to v2.1 itself as
^ sorts in the ASCII/UTF-8 encoding after all other common tag
characters like digits and dots.
Use " ^" instead as space is not valid in a reference name, sorts
before all other valid reference characters (thus forcing next entry
locality) and this looks like a peeled marker for the prior tag.
Change-Id: I26d2247a0428dfe26a9c319c02159502b3a67455
This experimental code can be enabled in $GIT_DIR/config:
[core]
repositoryformatversion = 1
[extensions]
refsBackendType = RefTree
When these are set the repository will read references from the
RefTree rooted by the $GIT_DIR/refs/txn/committed reference.
Update debug-rebuild-ref-tree to rebuild refs/txn/committed only from
the bootstrap layer. This avoids misuse by rebuilding using packed-refs
and $GIT_DIR/refs tree.
Change-Id: Icf600e4a36b2f7867822a7ab1f1617d73c710a4b
Instead of storing references in the local filesystem rely on the
RefTree rooted at refs/txn/committed. This avoids needing to store
references in the packed-refs file by keeping all data rooted under
a single refs/txn/committed ref.
Performance to scan all references from a well packed RefTree is very
close to reading the packed-refs file from local disk.
Storing a packed RefTree is smaller due to pack file compression,
about 49.39 bytes/ref (on average) compared to packed-refs using
~65.49 bytes/ref.
Change-Id: I75caa631162dc127a780095066195cbacc746d49
With this support we no longer need the 'utf-8' alias. UTF-8 will be
automatically tried when the encoding header is not recognized and used
if the character sequence cleanly decodes as UTF-8.
Modernize some of the references to use StandardCharsets.
Change-Id: I4c0c88750475560e1f2263180c4a98eb8febeca0
These types were deprecated in 0.9.1 (aka 384a19eee0).
If anyone is still using them, its time to stop.
Change-Id: I3f73347ba78c639e0c6a504812bc1a0702f829b1
Consolidate copies of this function into one location.
Add some unit tests to prevent bugs that were accidentally
introduced while trying to make this refactoring.
Change-Id: I82f64bbb8601ca2d8316ca57ae8119df32bb5c08
A group of updates can be applied by updating the tree in one step,
writing out a new root tree, and storing its SHA-1. If references
are stored in RefTrees, comparing two repositories is a matter of
checking if two SHA-1s are identical. Without RefTrees comparing two
repositories requires listing all references and comparing the sets.
Track the "refs/" directory as a root tree by storing references
that point directly at an object as a GITLINK entry in the tree.
For example "refs/heads/master" is written as "heads/master".
Annotated tags also store their peeled value with ^{} suffix, using
"tags/v1.0" and "tags/v1.0^{}" GITLINK entries.
Symbolic references are written as SYMLINK entries with the blob of
the symlink carrying the name of the symbolic reference target.
HEAD is outside of "refs/" namespace so it is stored as a special
"..HEAD" entry. This name is chosen because ".." is not valid in
a reference name and it almost looks like "../HEAD" which names
HEAD if the reader was inside of the "refs/" directory.
A new Command type is required to handle symbolic references and
peeled references.
Change-Id: Id47e5d4d32149a9e500854147edd7d93c1041a39
* changes:
DirCache: Do not create duplicate tree entries
DirCacheEditor: Replace file-with-tree and tree-with-file
AddCommand: Use NameConflictTreeWalk to identify file-dir changes
Trailing whitespace is usually removed in properties files so
JGitText did not supply a space between : and the remote message.
Ensure the space exists at runtime by reading the localized string
and appending a space if it is missing.
Messages should be dynamically fetched and not held in a static
class variable, as they can be changed using thread locals.
Change-Id: If6a3707d64094253b1a5304fbfafcf195db7497a
Today there are plenty of modern build tool systems available in the
wild (in no particular order):
* http://bazel.io
* https://pantsbuild.github.io
* http://shakebuild.com
* https://ninja-build.org
* https://buckbuild.com
The attributes, that all these build tools have in common, are:
* reliable
* correct
* very fast
* reproducible
It must not always be the other build tool, this project is currently
using. Or, quoting Gerrit Code Review maintainer here:
"Friends, don't let friends use <the other build tool system>!"
This change is non-complete implementation of JGit build in Buck,
needed by Gerrit Code Review to replace its dependency with standlone
JGit cell. This is very useful when a developer is working on both
projects and is trying to integrate changes made in JGit in Gerrit.
The supported workflow is:
$ cd jgit
$ emacs <hack>
$ cd ../gerrit
$ buck build --config repositories.jgit=../jgit gerrit
With --config repositories.jgit=../jgit jgit cell is routed through
JGit development tree.
To build jgit, issue:
$ buck build //:jgit
[-] PROCESSING BUCK FILES...FINISHED 0,0s
Yes, you can't measure no-op build time, given that Buck daemon is
used.
Change-Id: I301a71b19fba35a5093d8cc64d4ba970c2877a44
Signed-off-by: David Ostrovsky <david@ostrovsky.org>
Pushing curl repository to gerrit fails with a message:
remote: error: internal error while processing changes
java.nio.charset.IllegalCharsetNameException: 'utf8'
curl repository url: https://github.com/bagder/curl.git
To avoid this problem encodingAliases in RawParseUtils have
been extended to contain "'utf8'" (single quoted utf8) string.
Change-Id: I40f613cfdcabf0dc9455bee45116ab8d8c7dd6ee
Signed-off-by: Eryk Szymanski <eryksz@gmail.com>
Accept some of the same section keys that fsck does in git-core,
allowing repositories to skip over specific kinds of acceptable
broken objects, e.g.:
[fsck]
duplicateEntries = ignore
zeroPaddedFilemode = ignore
The zeroPaddedFilemode = ignore is a synonym for the JGit specific
allowLeadingZeroFileMode = true. Only accept the JGit key if git-core
key was not specified.
Change-Id: Idaed9310e2a5ce5511670ead1aaea2b30aac903c
Some ancient objects may be broken, but in a relatively harmless way.
Allow the ObjectChecker caller to whitelist specific objects that are
going to fail checks, but that have been reviewed by a human and decided
the objects are OK enough to permit continued use of.
This avoids needing to rewrite history to scrub the broken objects out.
Honor the git-core fsck.skipList configuration setting when receiving a
push or fetching from a remote repository.
Change-Id: I62bd7c0b0848981f73dd7c752860fd02794233a6
Base Java version for JGit is now Java 7. The java.text.Normalizer
class was available in Java 6. Reflection is no longer required to
normalize strings for Mac OS X.
Change-Id: I98e14b72629a7a729a2d40a3aa275932841274e8
* changes:
Sort "eager" path-like options to the end of the help
reset command: provide convenient and meaningful options help
commit command: allow to specify path(s) argument(s)
status command: consume more then one argument after --
repo command: properly name the required 'path' argument
Un-ignored existing CLI tests which run just fine on Java 7+
Don't treat command termination due '-h' option as a fatal error
This avoids duplication of code between receive-pack and fetch-pack paths.
Separate methods are still required to check use of receive.fsckobjects vs.
fetch.fsckobjects, both of which default to transfer.fsckobjects.
Change-Id: I41193e093e981a79fc2f63914e273aaa44b82162
Hoist ObjectIdSet up to lib as part of the public API and add
the interface to some common types like PackIndex and JGit custom
ObjectId map types. This cleans up wrapper code in a number of
places by allowing direct use of the types as an ObjectIdSet.
Future commits can now rely on ObjectIdSet as a simple read-only
type to check a set of objects from a number of storage options.
Change-Id: Ib62b062421d475bd52abd6c84a73916ef36e084b
If a file (e.g. "A") and a subtree file (e.g. "A/foo.c") both appear
in the DirCache this cache should not be written out as a tree object.
The "A" file and "A" subtree conflict with each other in the same tree
and will fail fsck.
Detect this condition during DirCacheBuilder and DirCacheEditor
finish() so the application can be halted early before it updates a
DirCache that might later write an invalid tree structure.
Change-Id: I95660787e88df336297949b383f4c5fda52e75f5
If a PathEdit tries to store a file where a subtree was, or a subtree
where a file was, replace the entry in the DirCache with the new
name(s). This supports switching between file and tree entry types
using a DirCacheEditor.
Add new unit tests to cover the conditions where these can happen.
Change-Id: Ie843d9388825f9e3d918a5666aa04e47cd6306e7
Adding a path that already exists but is changing type such as
from symlink to subdirectory requires a NameConflictTreeWalk to
match up the two different entry types that share the same name.
NameConflictTreeWalk needs a bug fix to pop conflicting entries
when PathFilterGroup aborts the walk early so that it does not
allow DirCacheBuilderIterator to copy conflicting entries into
the output cache.
Change-Id: I61b49cbe949ca8b4b98f9eb6dbe7b1f82eabb724
This fixes the command below:
jgit commit a -m "added file a"
which currently fails with:
org.eclipse.jgit.api.errors.JGitInternalException: The combination of
arguments --all and --only is not allowed
Bug: 484973
Change-Id: I37a4ccd68101a66520ef99110f7aa0cbdcc8beba
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
This will execute git commands (with arguments) specified on the command
line, handy for developing/debugging a sequence of arbitrary git
commands working on same repository.
The git working dir path can be specified via Java system property
"git_work_tree". If not specified, current directory will be used.
Change-Id: I621a9ec198c31e28a383818efeb4b3f835ba1d6f
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Neaten up formatting and avoid strings, which prevents the need for
NLS comment tags. Instead check the last character using char
literal, and append a char literal instead of a string.
Change-Id: Ib68e017769a1f5c03200354a805769d585a48c8b
Similar to nested directories, nested copyfiles won't work with git submodule
either.
Change-Id: Idbe965ec20a682fca0432802858162f8238f05de
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Handle existing symlink as a file, not as directory if deleting a file
before creating (overriding) a symlink.
Bug: 484491
Change-Id: I29dbf57d1daec2ba98454975b093e1d381d05196
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Keep a user amused while the server does work by spinning a
little ASCII-art object on a single line.
Change-Id: Ie8f181d1aa606d4ae69e5d3ca4db387cea739f38
Previously, non-reuse deltas were only included in packStatistics if they
were not cached by the deltaWindow.
Change-Id: I7684d8214875f0a7569b34614f8a3ba341dbde9c
Signed-off-by: James Kolb <jkolb@google.com>
When setting timeout on push, BasePackConnection creates a timer, which
will be terminated when push finishes. But, when using
SmartHttpPushConnection, it dropped the first timer created in the
constructor and then created another timer in doPush. If new threads are
created faster than the gc collects then this may stop the service if
it's hitting the max process limit. Hence don't create a new timer if it
already exists.
Bug: 474947
Change-Id: I6746ffe4584ad919369afd5bdbba66fe736be314
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
PathFilter and PathFilterGroup form JGit's implementation of git's
path-limiting feature in commands like log and diff. To save time
when traversing trees, a path specification
foo/bar/baz
tells the tree walker not to traverse unrelated trees like qux/. It
does that by returning false from include when the tree walker is
visiting qux and true when it is visiting foo.
Unfortunately that test was implemented to be slightly over-eager: it
doesn't only return true when asked whether to visit a subtree "foo"
but when asked about a plain file "foo" as well. As a result, diffs
and logs restricted to some-file/non-existing-suffix unexpectedly
match against some-file:
$ jgit log -- LICENSE/no-such-file
commit 629fd0d594
Author: Shawn O. Pearce <spearce@spearce.org>
Date: Fri Jul 02 14:52:49 2010 -0700
Clean up LICENSE file
[...]
Fix it by checking against the entry's mode.
Gitiles +log has the same bug and benefits from the same fix.
Callers know not to worry about what subtrees are included in the tree
walk because shouldBeRecursive() returns true in this case, so this
behavior change should be safe. This also better matches the behavior
of C git:
$ empty=$(git mktree </dev/null)
$ git diff-tree --abbrev $empty HEAD -- LICENSE/no-such-file
$ git diff-tree --abbrev $empty HEAD -- tools/no-such-file
:000000 040000 0000000... b62648d... A tools
Bug: 484266
Change-Id: Ib4d53bddd8413a9548622c7b25b338d287d8889d
Pushing with JGit commandline to e.g. Github failed with "unauthorized"
since HttpUrlConnection calls the configured authenticator implicitly.
The problem is that during a push two requests are sent to the server,
first a GET and then a POST (containing the pack data). The first GET
request sent anonymously is rejected with 401 (unauthorized). When an
Authenticator is installed the java.net classes will use the
Authenticator to ask the user for credentials and retry the request.
But this happens under the hood and JGit level code doesn't see that
this happens.
The next request is the POST but since JGit thinks the first GET request
went through anonymously it doesn't add authentication headers to the
POST request. This POST of course also fails with 401 but since this
request contains a lot of body-data streamed from JGit (the pack file!)
the java.net classes can't simply retry the request with authorization
headers. The whole process fails.
Fix this by using Apache httpclient which doesn't use Authenticator to
retrieve credentials. Instead initialize TransportCommand to use the
default credential provider if no other credentials provider was set
explicitly. org.eclipse.jgit.pgm.Main sets this default for the JGit
command line client.
Change-Id: Ic4e0f8b60d4bd6e69d91eae0c7e1b44cdf851b00
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
BasePackPushConnection#readStringLongTimeout() was setting a timeout 10
times bigger than some other timeout or the pack transfer time. This
could lead to negative integer values when we hit an arithmetic
overflow. Add a check for this situation and set the timeout to
Integer.MAX_VALUE when overflow happens.
Bug: 484352
CC: Eugene Petrenko <eugene.petrenko@gmail.com>
Change-Id: Ie2a86312c1bcb1ec3e6388fa490ab3c845d41808
This change fixes all compiler errors in JGit and replaces possible
NPE's with either appropriate exceptions, avoiding multiple "Nullable
return" method calls or early returning from the method.
Change-Id: I24c8a600ec962d61d5f40abf73eac4203e115240
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
If an application uses PushConnection directly on the native Git wire
protocols JGit should send along the application's expected oldId, not
the advertised value. This allows the remote peer to compare-and-swap
since it was not tested inside JGit.
Discovered when I tried to use a PushConnection (bypassing the
standard PushProcess) and the client blindly overwrote the remote
reference, even though my app had supplied the wrong ObjectId for
the expectedOldObjectId. This was not expected and cost me over an
hour of debugging, plus "corruption" in the remote repository.
By passing along the exact expectedOldObjectId from the app the
remote side can do the check that the application skipped, and
avoid data loss.
Change-Id: Id3920837e6c47100376225bb4dd61fa3e88c64db
FileTreeIterator was calling by mistake
WorkingTreeIterator.idSubmodule(Entry). Instead it should always compute
idSubmodule on its own.
Change-Id: Id1b988aded06939b1d7edd2671e34bf756896c0e
In I1f5dc07182dbf6bba2a9f4807fdd25b475da4ead, FileBasedConfig got
support for reading a configuration with UTF8 BOM. Apply the same
support to BlobBasedConfig, to make SubmoduleWalk able to parse
.gitmodules configurations with BOM.
Change-Id: I25b5474779952fe2c076180b96fc2869eef190a8
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
The ChainingCredentialsProvider gave up chaining to the next provider if
the first one returned no credentials items for the given URI.
Change-Id: I9539c50db35e564db9d43d8ebb71d7e9c6fdcc19
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
JGit's Nullable type was added[1] in the hope of being able to add
nullness annotations that (a) do not preclude building and running
with Java 7 and (b) could be shared by Gerrit, which uses a custom
Nullable type for other reasons[2]. Sharing a type is useful because
Eclipse's null analysis is only able to use one Nullable type at a
time in a given workspace (so for this analysis to function in a
workspace used to develop Gerrit, JGit and Gerrit would need to use
the same Nullable type).
The new Nullable type has CLASS instead of RUNTIME retention because
there wasn't any obvious use for the annotation at run time.
Gerrit uses the Nullable annotation to communicate with Guice. Guice
injection happens at runtime, so it needs to be able to read the
@Nullable annotations at run time[3]. Otherwise Guice produces
provisioning errors, such as
3) null returned by binding at com.google.gerrit.lucene.LuceneChangeIndex$Factory.create()
but parameter 7 of com.google.gerrit.lucene.LuceneChangeIndex.<init>() is not @Nullable
Switch to RUNTIME retention to avoid this.
While at it, update the javadoc to explain more clearly how this
annotation relates to other Nullable types[4]. This should make it
clearer why JGit needed another Nullable type:
A. Avoiding dependency on Java 8
B. RUNTIME retention to allow Guice to read the annotation at run time
C. Named Nullable so Guice can recognize the annotation
D. Not an addition to Java EE's javax.annotation package, to avoid
the split-package problem[2] that prevents the annotation from
being readable at run time when loaded from an OSGi container
E. Avoiding heavyweight dependencies, deprecated dependencies, and
dependencies on package internals
org.checkerframework.checker.nullness.qual.Nullable: A
com.sun.istack.internal.Nullable: B, E
*.CheckForNull, *.NullAllowed, etc: C
edu.umd.cs.findbugs.annotations.Nullable: B, E
javax.annotation.Nullable: D
org.eclipse.jdt.annotation.Nullable: B
org.jetbrains.annotations.Nullable: B
org.jmlspecs.annotation.Nullable: E
android.annotation.Nullable, android.support.annotation.Nullable: E
[1] https://git.eclipse.org/r/59993
[2] https://gerrit-review.googlesource.com/50112
[3] https://github.com/google/guice/blob/master/core/src/com/google/inject/internal/Nullability.java
[4] https://github.com/typetools/checker-framework/blob/5832a01f1/checker/src/org/checkerframework/checker/nullness/NullnessAnnotatedTypeFactory.java#L118http://types.cs.washington.edu/checker-framework/current/checker-framework-manual.html#nullness-related-work
Change-Id: I6c482653d2b53e3509abb11211b67fc29cf2949c
Signed-off-by: Jonathan Nieder <jrn@google.com>
If the password char array is null constructing a new String from this
array fails with a NPE. Add a null check to fix this.
Change-Id: Ifae6eecca38d5f114861f44658a32521e6e96866
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This should mirror the behavior of `git push --atomic` where the
client asks the server to apply all-or-nothing. Some JGit servers
already support this based on a custom DFS backend. InMemoryRepository
is extended to support atomic push for unit testing purposes.
Local disk server side support inside of JGit is a more complex animal
due to the excessive amount of file locking required to protect every
reference as a loose reference.
Change-Id: I15083fbe48447678e034afeffb4639572a32f50c
PreReceiveHook is given a Collection<ReceiveCommand> and it can be
very useful here to call ReceiveCommand.filter(cmds, NOT_ATTEMPTED).
Overload filter to accept both Iterable and List.
Keep backwards binary compatibility for List by upcasting to Iterable.
Change-Id: Ib1341876c703670945ef209edc8259715ee86c26
Recursively copying a tree into a DirCache is a bottleneck for some
algorithms like the in memory merge code in Gerrit Code Review. Drop
a layer down in the stack and use CanonicalTreeParser directly as the
addition logic only processes 1 tree at a time and does not need the
merge sorting feature (or overhead) of TreeWalk.
Combined with 761814fe9c ("DirCacheEntry: Speed up creation by
avoiding string cast") tree loading 38,900 entries nearly halves
in running time from 70ms to 36ms on some platforms.
Change-Id: If1490ca25de0679a71cf508f59b486f9cc816165
Application code sometimes wants to read a DirCache from an ObjectId,
but its confusing how to do this because its buried inside the
DirCacheBuilder.
Use this utility in a few places within JGit that also want to read
a DirCache from a tree's ObjectId.
Change-Id: I578b7e18e58753d154937f4ab835012b09e5adca
Instead of checking every entry for .gitattributes only look for the
entry on request by TreeWalk. This avoids impacting uses like RevWalk
filtering history.
When the attrs is requested skip to the start of the tree and look for
.gitattributes until either it is found, or it is impossible to be
present. Due to the sorting rules of tree entries .gitattributes
should be among the first or second entries in the tree so very few
entries will need to be considered.
Waiting to find the .gitattributes file by native ordering may miss
attrs for files like .config, which sorts before .gitattributes.
Starting from the front of the tree on demand ensures the attributes
are parsed as early as necessary to process any entry in the tree.
Due to TreeWalk recursively processing up the tree of iterators we
cannot just reset the current CanonicalTreeParser to the start as
parent parsers share the same path buffer as their children.
Resetting a parent to look for .gitattributes may overwrite path
buffer data used by a child iterator. Work around this by building a
new temporary CanonicalTreeParser instance.
Change-Id: Ife950253b687be325340d27e9915c9a40df2641c
Line breaking before , is ugly to read. Most formatters and humans
expect line break after , so update a few offensive locations.
Use String.format() for the construction of the error message when
a bad DirCachEntry is being failed on. This simplifies the code and
its not a performance critical section.
Change-Id: I5d990389e7ba24ef0861cf8ec0026ed030d4aeda
The checkPath function is available as a byte[] form, in fact the
String form just converts to byte[] to run the algorithm.
Having DirCacheEntry take a byte[] -> String -> byte[] to check if
each path is valid is a huge waste of CPU time. On some systems it
can double the time required to read 38,999 files from trees to the
DirCache. This slows down any operation using a DirCache.
Expose the byte[] form and use it for DirCacheEntry creation.
Change-Id: I6db7bc793ece99ff3c356338d793c07c061aeac7
The internal array may be longer than entryCnt, in this case the tail
of the array is padded with null entries. Do not return those to the
caller of getEntriesWithin().
Change-Id: I19efb05e103fab6b739ced407f6e28155a48dba6
If defined in .gitattributes call smudge filter during checkout.
To support checkout where current HEAD,index do not contain attributes
we need to also consider attributes from the tree we checkout. Therefore
CanonicalTreeParser has to learn how to provide attributes.
Change-Id: I168fdb81a8e1a9f991587b3e95a36550ea845f0a
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When filters are defined for certain paths in gitattributes make
sure that clean filters are processed when adding new content to the
object database.
Change-Id: Iffd72914cec5b434ba4d0de232e285b7492db868
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Attributes represents a semantic collector of Attribute(s) and replaces
the anonymous Map<String,Attribute>. This class will be returned by
TreeWalk.getAttributes(). It offers convenient access to the attributes
wrapped in the Attributes object. Adds preparations for a future
Attribute Macro Expansion
Change-Id: I8348c8c457a2a7f1f0c48050e10399b0fa1cdbe1
Signed-off-by: Ivan Motsch <ivan.motsch@bsiag.com>
When FS.runProcess was called and an InputStream was given the method
tried to pump the whole InputStream to the process. When the method
ended the InputStream was not giving any data anymore. Consequently
close the InputStream inside the method.
Change-Id: I0ed738a775e5c977b21447d195acee1ecf5e2cb9
When running from a non-bare repository, "jgit repo" checks whether
the rev passed in is a sha1 or branch name and in the latter case will
check out origin/<branch>.
We are expecting refs/remotes/origin/<branch>, but as a side effect of
using getRef we also end up looking for refs/origin/<branch>,
refs/heads/origin/<branch>, and so on. Avoid that by using exactRef
instead.
Signed-off-by: Jonathan Nieder <jrn@google.com>
Change-Id: I670b2e48a88138a1f2104ea201baa958e9edbddb
The Repository class provides only one method to look up a ref by
name, getRef. If I request refs/heads/master and that ref does not
exist, getRef will look further in the search path:
ref/refs/heads/master
refs/heads/refs/heads/master
refs/remotes/refs/heads/master
This behavior is counterintuitive, needlessly inexpensive, and usually
not what the caller expects.
Allow callers to specify whether to use the search path by providing
two separate methods:
- exactRef, which looks up a ref when its exact name is known
- findRef, which looks for a ref along the search path
For backward compatibility, keep getRef as a deprecated synonym for
findRef.
This change introduces findRef and exactRef but does not update
callers outside tests to use them yet.
Change-Id: I35375d942baeb3ded15520388f8ebb9c0cc86f8c
Signed-off-by: Jonathan Nieder <jrn@google.com>
org.eclipse.jgit.lib.Repository class is an example of the API which
should be written with Java 8 java.util.Optional<T> type. Unfortunately
this API is already released and widely used. The good clients are
currently doing their best with checking return values for null and bad
clients do not know how bad their code is.
I've tried not to change any logic and to be as less intrusive as
possible. Most of the JGit code was well prepared to this, only few
classes needed some smaller fixes.
This change fixes all compiler errors in JGit and replaces possible
NPE's with either appropriate exceptions, avoiding multiple "Nullable
return" method calls or early returning from the method.
Because annotating getDirectory() and getFS() as Nullable would cause
lot of additional changes in JGit and EGit they are postponed.
Change-Id: Ie8369d2c9c5fac5ce83b3b1b9bc217d7b55502a3
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
File, FileInputStream and friends may throw FileNotFoundException even
if the file is existing e.g. when file permissions don't allow to access
the file content. In most cases this is a severe error we should not
suppress hence rethrow the FileNotFoundException in this case.
This may also fix bug 451508.
Bug: 451508
Change-Id: If4a94217fb5b7cfd4c04d881902f3e86193c7008
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
The class FS_Win32 was always trying out to create a temporary symlink
in order to find out whether symlinks are supported. FS_Win32_Cygwin was
overwriting this method and always returned true. But when the user
running JGit does not have administrative rights then the creation of
symlinks is forbidden even if he is running on FS_Win32_Cygwin. A lot of
tests failed only on the Windows platform because of this. It was
correctly detected that FS_Win32_Cygwin is the filesystem abstraction to
be used but creation of symlinks always failed because of lacking
privileges of the user running the tests.
This fix teaches FS_Win32_Cygwin to behave like FS_Win32 and to test
whether symlinks can be created in order to find out whether symlinks
are supported.
Change-Id: Ie2394631ffc4c489bd37c3ec142ed44bbfcac726
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This fixes a warning saying this filter isn't needed anymore.
Change-Id: If77056378befe86c1773950dbe48a82c833fd532
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
getRef() loops over its search path to find a ref:
Ref ref = null;
for (String prefix : SEARCH_PATH) {
ref = readRef(prefix + needle, packed);
if (ref != null) {
ref = resolve(ref, 0, null, null, packed);
break;
}
}
fireRefsChanged();
return ref;
If readRef returns null (indicating that the ref does not exist), the
loop continues so we can find the ref later in the search path. And
resolve should never return null, so if we return null it should mean
we exhausted the entire search path and didn't find the ref.
... except that resolve can return null: it does so when it has
followed too many symrefs and concluded that there is a symref loop:
if (MAX_SYMBOLIC_REF_DEPTH <= depth)
return null; // claim it doesn't exist
Continue the loop instead of returning null immediately. This makes
the behavior more consistent.
Arguably getRef should throw an exception when a symref loop is
detected. That would be a more invasive change, so if it's a good
idea it will have to wait for another patch.
Change-Id: Icb1c7fafd4f1e34c9b43538e27ab5bbc17ad9eef
Signed-off-by: Jonathan Nieder <jrn@google.com>
If the index file exists but can't be read for example because of wrong
filesystem permissions we should throw a specific exception. This allows
EGit to handle this error situation.
Bug: 482607
Change-Id: I50bfcb719c45caac3cb5550a8b16307c2ea9def4
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to [1] the pre-push hook expects two parameters which provide
the name and location of the destination remote, if a named remote is
not being used both values should be the same.
We did set the first parameter to null in that case which caused
ProcessBuilder to throw a NullPointerException since its start() method
doesn't accept null arguments.
[1] https://git-scm.com/docs/githooks#_pre_push
Bug: 482393
Change-Id: Idb9b0a48cefac01abfcfdf00f6d173f8fa1d9a7b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When checking out a branch we need to access the attributes stored
in the tree to be checked out. E.g. directly after a clone we checkout
the remote HEAD. In this case index and workingtree are still empty.
So we have to search the tree to be checked out for attributes.
Change-Id: I6d96f5d095ed2e3c259d4b12124e404f5215bd9f
Adds the getAttributes feature to the tree walk. The computation of
attributes needs to be done by the TreeWalk since it needs both a
WorkingTreeIterator and a DirCacheIterator.
Bug: 342372
CQ: 9120
Change-Id: I5e33257fd8c9895869a128bad3fd1e720409d361
Signed-off-by: Arthur Daussy <arthur.daussy@obeo.fr>
Signed-off-by: Christian Halstrick <christian.halstrick@sap.com>
Other plugins which want to use JGit nullness annotations in their code
cannot do this if the annotations aren't part of the published API.
Unfortunately it looks like although Eclipse JDT allows to use custom
nullness annotation types per project, it does not understand if those
annotations are used mixed with other nullness annotations in other
projects. E.g. EGit can either configure JGit annotations for NPE
analysis and so "understand" nullness from JGit API but so it loses the
ability to use any other nullness annotations to annotate its own code.
Change-Id: Ieeeb578c2fe35223a7561d668dce8e767dc89ef0
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
The annotation is required for example in Repository case (patch
follows), where almost all non-void return methods return Nullable
except few returning NonNull. I definitely do not favor this style, but
it is a nightmare to clients to guess if the null check is needed or
not.
Change-Id: Ib2a778a246c6d84b7c32565f54df2385b59f6498
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
When JGit tries to detect symlink support the attempt to create a
symlink may fail with a java.lang.InternalError. This was reported for a
case where the application using JGit runs in Windows XP compatibility
mode using Oracle JDK 1.8. Handle this by assuming symlinks are not
supported in this case.
Bug: 471027
Change-Id: I978288754dea0c6fffd3457fad7d4d971e27c6c2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
* stable-4.1:
Prepare 4.1.2-SNAPSHOT builds
JGit v4.1.1.201511131810-r
Fallback exactRef: Do not ignore symrefs to unborn branch
RefDirectory.exactRef: Do not ignore symrefs to unborn branch
Change-Id: I66afb303f355aad8a7eaa7a6dff06de70ae9c490
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
When asked to read a symref pointing to a branch-yet-to-be-born (such
as HEAD in a newly initialized repository), getRef and getRefs provide
different results.
getRef: SymbolicRef[HEAD -> refs/heads/master=00000000]
getRefs and getAdditionalRefs: nothing
exactRef should match the getRef behavior: it is meant to be a
simpler, faster version of getRef that lets you search for a ref
without resolving it using the search path without other semantic
changes. But the fallback implementation of exactRef relies on getRefs
and produces null for this case.
Luckily the in-tree RefDatabase implementations override exactRef and
get the correct behavior. But any out-of-tree storage backend that
doesn't inherit from DfsRefDatabase or RefDirectory would still return
null when it shouldn't.
Let the fallback implementation use getRef instead to avoid this.
This means that exactRef would waste some effort traversing the ref
search path when the named ref is not found --- but subclasses tend to
override exactRef for performance already, so in the default
implementation correctness is more important.
Bug: 478865
Change-Id: I60f04e3ce3bf4731640ffd2433d329e621330029
When attempting to determine the size of a blob that does not exist,
the RenameDetector throws a MissingObjectException.
The fix is to return a size of zero if the size is requested for a blob
id that doesn't exist.
Bug: 481577
Change-Id: I4e86276039c630617610cc51d0eefa56d7d3952f
Signed-off-by: Rüdiger Herrmann <ruediger.herrmann@gmx.de>
When asked to read a symref pointing to a branch-yet-to-be-born (such
as HEAD in a newly initialized repository), DfsRepository and
FileRepository return different results.
FileRepository:
exactRef("HEAD") => null
DfsRepository:
exactRef("HEAD") => SymbolicRef[HEAD -> refs/heads/master=00000000]
getRef("HEAD") returns the same as DfsRepository's exactRef in both
backends.
The intended behavior is the DfsRepository one: exactRef() is supposed
to be like getRef(), but more exact because it doesn't need to
traverse the search path.
The discrepancy is because DfsRefDatabase implements exactRef()
directly with the intended semantics, while RefDirectory uses a
fallback implementation built on top of getRefs(). getRefs() skips
symrefs to an unborn branch.
Override the fallback implementation with a correct implementation
that is similar to getRef() to avoid this. A followup change will fix
the fallback.
Change-Id: Ic138a5564a099ebf32248d86b93e2de9ab3c94ee
Reported-by: David Pursehouse <david.pursehouse@sonymobile.com>
Improved-by: Christian Halstrick <christian.halstrick@sap.com>
Bug: 478865
This reverts commit bbcbcab8d3.
These classes were part of the public API and should not be removed
until JGit 5.0.
Change-Id: Ife4bee69f82151de6ef8ea1a4c6c146d91bbf0d5
These classes make improper use of internal classes in the public API
and were replaced by corresponding classes in the JGit 4.1 release.
Change-Id: I3d474210e49089aa788314b4e08f505f0d26619b
Signed-off-by: Terry Parker <tparker@google.com>
These API changes were introduced in f523f21e and 73474466.
BitmapBuilder is an interface to be implemented by implementors of this
interface. According to OSGi semantic versioning rules breaking API
changes require update of the minor version only if implementors of the
API have to be adapted and the changes do not affect clients of the API.
Change-Id: If45d204181ea9bc788b6b57693ca17b1847564c7
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
PackWriterBitmapPreparer (which is in another package) is already well
aware of the mapping between EWAHCompressedBitmaps and the
higher-level CompressedBitmap objects of the BitmapIndexImpl API.
Making the CompressedBitmap type public makes the translation more
obvious and wouldn't break any abstractions that aren't already
broken. So expose it.
This is all under org.eclipse.jgit.internal so there are no API
stability guarantees --- we can change the API if internals change
(for example if some day there are bitmaps spanning multiple packs).
In particular this means the confusing toBitmap helper can be removed.
Change-Id: Ifb2e8804a6d5ee46e82a76d276c4f8507eaa2a4c
Update the project-specific Eclipse settings to replace the use of the
org.eclipse.jdt.annotation.Nullable class the new JGit-specific
@Nullable annotation. I verified that Eclipse reports errors when the
return value of a method annotated with
@org.eclipse.jgit.annotations.Nullable is dereferenced without a null
check.
Also remove the Maven and MANIFEST.MF dependencies on
org.eclipse.jdt.annotation.
Eclipse null analysis uses three annotations: @Nullable, @NonNull and
@NonNullByDefault. All three are updated in this patch because it is
invalid to set the Eclipse preferences to empty values. So far only
@Nullable has been introduced in org.eclipse.jgit.annotations.
My personal preference is to follow the advice in Effective Java and
avoid the null-return idiom, and to avoid passing null values in
general. This sets the expectation is that arguments and return types
are assumed non-null unless otherwise documented. If that is the
expectation, then consistent application of @NonNull is redundant and
hurts readability by cluttering the code, obscuring the occasional
@Nullable annotation that really requires attention.
If the JGit community decides there is value in using the @NonNull and
@NonNullByDefault annotations we can add them--this change configures
Eclipse to use them.
Change-Id: I9af1b786d1b44b9b0d9c609480dc842df79bf698
Signed-off-by: Terry Parker <tparker@google.com>
Update existing @Nullable uses to use the JGit-internal version of the
annotation.
Change-Id: I95234ffad4c3110f9597fbd3a2760f653e22ecf7
Signed-off-by: Terry Parker <tparker@google.com>
Commit 847b3d1 enabled annotation-based NPE analysis to JGit.
In so doing, it introduced a new dependency on the org.eclipse.jdt that
is undesirable. Follow Gerrit's lead by adding an internal Nullable type
(see
https://gerrit.googlesource.com/gerrit/+/stable-2.11/gerrit-common/src/main/java/com/google/gerrit/common/Nullable.java).
The javax.annotations.Nullable class uses a retention policy of RUNTIME,
whereas the org.eclipse.jdt.annotation.Nullable class used a policy of
CLASS. Since I'm not aware of tools that make use of the annotation at
runtime I chose the CLASS policy. If in the future there is a benefit to
retaining the annotations in the running binary we can update this
class.
Change-Id: I63dc8f9a6dc46b517cbde211bb5e2f8521a54d04
Signed-off-by: Terry Parker <tparker@google.com>
A CompressedBitmap represents a pair (EWAH bit vector, PackIndex
assigning bit positions to git objects). The bit vector is a member
field and the PackIndex is implicit via the 'this' reference to the
outer class.
Make this clearer by making CompressedBitmap a static class and
replacing the 'this' reference by an explicit field.
Likewise for CompressedBitmapBuilder.
Change-Id: Id85659fc4fc3ad82034db3370cce4cdbe0c5492c
Suggested-by: Terry Parker <tparker@google.com>
When creating bitmaps during gc, the bitmaps in tipCommitBitmaps are
built in setupTipCommitBitmaps using the following procedure:
0. create a bitmap ('reuse') that lists all ancestors of commits
whose existing bitmaps will be reused. I will call this the
reused part of history.
1. initialize a bitmap for each of the pack's "want"s by taking
a copy of the 'reuse' bitmap and setting the bit corresponding
to the one wanted commit.
2. walk through ancestors of wants, excluding the reused part of
history. Add parents of visited commits to bitmaps that have
those commits.
3. AND-NOT each tipCommitBitmap against the 'reuse' bitmap
4. Sort the bitmaps and AND-NOT each against the previous so they
partition the new commits.
The OR against 'reuse' in step 1 and the AND-NOT against 'reuse'
cancel each other out, except when commits from the reused part of
history are added to a bitmap in step 2. So avoid adding commits from
the reused part of history in step 2 and skip the OR and AND-NOT.
Performance impact (thanks to Terry for measuring):
The initial "selecting bitmaps" phase of garbage collection decreased
from (83 + 81 + 85) / 3 = 83 to (56 + 57 + 56) / 3 = 56.3, meaning
nearly a ~50% speedup of that phase.
Tested-by: Terry Parker <tparker@google.com>
Change-Id: I26ea695809594347575d14a1d8e6721b8608eb9c
Instead of using the newRevFilter helper, call the appropriate
RevFilter constructor directly. This means one less hop to find
documentation about what the RevFilter will do.
Change-Id: Ida6ff1c0457a47a1bd1e4ed0fd1dd42a616d214f
When setupTipCommitBitmaps is called, writeBitmaps does not have any
bitmaps saved, so these calls to .add always add a single commit and
do not OR in a bitmap.
The objects returned by nextObject after a commit walk is finished
are trees and blobs. Non-commit objects do not have bitmaps
associated so the call to .add also can only add a single object.
Change-Id: I7b816145251a7fa4f1fffe0d03644257ea7f5440
* changes:
Remove BitmapRevFilter.getCountOfLoadedCommits
Make BitmapBuilder.getBitmapIndex public
Deprecate BitmapBuilder.add and introduce simpler addObject method
Add @Override annotations to BitmapIndexImpl
Rely on bitmap RevFilter to filter walk during bitmap selection
Use 'reused' bitmap to filter walk during bitmap selection
Rely on bitmap RevFilter to filter tip commit setup walk
Use 'reused' bitmap to filter tip commit setup walk
Include ancestors of reused bitmap commits in reuse bitmap again
This is the caller that the BitmapBuilder.add method was designed
around. Moving away from .add makes it more verbose but hopefully
clearer.
Change-Id: I57b1d7c1dc8fb800b242b76c606922b5aa36b9b2
This puts the code for include() in each RevFilter returned by
newRevFilter in one place and should make the code easier to
understand and modify.
Change-Id: I590ac4604b61fc1ffe7aba2ed89f8139847ccac3
The count of loaded commits is equal to the number of commits returned
by the walk. Simplify BitmapRevFilter by counting them in the caller.
Change-Id: Ia95da47831d9e89d6f8068470ec4529aaabfa7dd
Every Bitmap in current JGit code has an associated BitmapIndex. Make
it public in BitmapBuilder to make retrieving bitmaps to OR in from
that index easier.
Change-Id: I2773aa94d8b67f12194608e6317c0792a5de21e2
The BitmapIndex.BitmapBuilder.add API is subtle:
/**
* Adds the id and the existing bitmap for the id, if one
* exists, to the bitmap.
*
* @return true if the value was not contained or able to be
* loaded.
*/
boolean add(AnyObjectId objectId, int type);
Reading the name of the method does not make it obvious what it will
do. Does it add the named object to the bitmap, or all objects
reachable from it? It depends on whether the BitmapIndex owns an
existing bitmap for that object. I did not notice this subtlety when
skimming the javadoc, either. This resulted in enough confusion to
subtly break the bitmap building code (see change
I30844134bfde0cbabdfaab884c84b9809dd8bdb8 for details).
So discourage use of the add() API by deprecating it.
To replace it, provide a addObject() method that adds a single object.
This way, callers can decide whether to use addObject() or or() based
on the context.
For example,
if (bitmap.add(c, OBJ_COMMIT)) {
for (RevCommit p : c.getParents()) {
rememberToAlsoHandle(p);
}
}
can be replaced with
if (bitmap.contains(c)) {
// already included
} else if (index.getBitmap(c) != null) {
bitmap.or(index.getBitmap(c));
} else {
bitmap.addObject(c, OBJ_COMMIT);
for (RevCommit p : c.getParents()) {
rememberToAlsoHandle(p);
}
}
which is more verbose but makes it clearer that the behavior
depends on the content of index.getBitmaps().
Change-Id: Ib745645f187e1b1483f8587e99501dfcb7b867a5
This makes it easier to distinguish between implementations of methods
from the interface from helpers internal to org.eclipse.jgit.internal.storage.*.
This was illegal in Java 5 but JGit requires newer Java these days.
Change-Id: I92c65f3407a334acddd32ec9e09ab7d1d39c4dc6
This RevWalk filters out reused bitmap commits via the 'reuse' bitmap.
Avoid possible wasted time and complexity by not also redundantly
marking them UNINTERESTING.
Change-Id: Ibb714002ddac599963d148a9aab90645fcc73141
When building fullBitmap in order to determine which ancestor chain to
add this commit to, we were excluding the ancestors of reusedCommits
using markUninteresting. This use of markUninteresting is a bit
wasteful because we already have a bitmap indicating exactly which
commits should be excluded (which can save some walking). Use it.
A separate commit will remove the now-redundant markUninteresting
call.
No behavior change intended (except for performance improvement).
Change-Id: I1112641852d72aa05c9a8bd08a552c70342ccedb
This RevWalk filters out reused bitmap commits via the 'reuse' bitmap.
Avoid possible wasted time and complexity by not redundantly marking
them UNINTERESTING any more.
Change-Id: If467ccd1d75e17cf9367b2a0399fca3f9d52adf9
When garbage collecting, we decide to reuse some bitmaps in older
history from the previous pack to save time. The remainder of commit
selection only involves commits not covered by those bitmaps.
Currently we carry that out in two ways:
1. by building a bitmap representing the already-covered commits,
for easy containment checks and AND-NOT-ing against
2. by marking the reused bitmap commits as uninteresting in the
RevWalk that finds new commits
The mechanism in (2) is less efficient than (1): rw.next() will walk
back from reused bitmap commits to check whether the commit it is
about to emit is an ancestor of them, when using the bitmap from (1)
would let us perform the same check with a single contains() call.
Add a RevFilter teaching the RevWalk to perform that same check
directly using the bitmap from (1).
The next time the RevWalk is used, a different RevFilter is installed
so this does not break that.
A later commit will drop the markUninteresting calls.
No functional change intended except a possible speedup.
Change-Id: Ic375210fa69330948be488bf9dbbe4cb0d069ae6
Prior to this change, DfsInserter would not insert an object into a pack
if it already existed in another pack in the repository, even if that
pack was unreachable. Consider this sequence of events:
- Object FOO is pushed to a repository.
- Subsequent ref changes make FOO UNREACHABLE_GARBAGE.
- FOO is subsequently re-inserted using a DfsInserter, but skipped
due to existing in UNREACHABLE_GARBAGE.
- The repository is repacked; FOO will not be written into a new pack
because it is not yet reachable from a reference. If the
UNREACHABLE_GARBAGE packs are deleted, FOO disappears.
- A reference is updated to reference FOO. This reference is now broken
as FOO was removed when the repacking process deleted the
UNREACHABLE_GARBAGE pack that stored the only copy of FOO.
The garbage collector can't safely delete the UNREACHABLE_GARBAGE
pack because FOO might be in the middle of being re-inserted/re-packed.
This change writes a duplicate copy of an object if it only exists in
UNREACHABLE_GARBAGE. This "freshens" the object to give it a chance to
survive long enough to be made reachable through a reference.
Change-Id: I20f2062230f3af3bccd6f21d3b7342f1152a5532
Signed-off-by: Mike Williams <miwilliams@google.com>
Until 320a4142 (Update bitmap selection throttling to fully span
active branches, 2015-10-20), setupTipCommitBitmaps contained code
along the following lines:
for (PackBitmapIndexRemapper.Entry entry : bitmapRemapper) {
if (!reuse(entry))
continue;
RevCommit rc = (RevCommit) rw.peel(rw.parseAny(entry));
reuseCommits.add(new BitmapCommit(rc));
EWAHCompressedBitmap bitmap =
remap.ofObjectType(remap.getBitmap(rc), OBJ_COMMIT);
writeBitmaps.addBitmap(rc, bitmap, 0);
reuse.add(rc, OBJ_COMMIT);
}
writeBitmaps.clearBitmaps(); // Remove temporary bitmaps
This loop OR-ed together bitmaps for commits whose bitmaps would be
reused. A subtle point is the use of the add() method, which ORs in a
bitmap from the BitmapIndex when it exists and falls back to OR-ing in
a single bit when that bitmap does not exist in the BitmapIndex.
Commit 320a4142 removed the addBitmap step, so the bitmap does not
exist in the BitmapIndex and the fallback behavior is triggered.
Simplify and restore the intended behavior by avoiding use of the
subtle use of the add() method --- use or() directly instead.
Change-Id: I30844134bfde0cbabdfaab884c84b9809dd8bdb8
When packing is able to reuse lots of deltas from existing packs, those
objects are marked as "doNotAttemptDelta" and do not contribute to
DeltaTask's computeTopPaths() "totalWeight" calculation.
In the extreme case when all packs are reusable, "totalWeight" will be
zero. DeltaTask.partitionTasks() uses "totalWeight" to determine a
"weightPerThread" size it uses to set up DeltaTasks. When "totalWeight"
is small, partitionTasks() ends up creating a DeltaTask for every
unique path.
For a large repository, the small "weightPerThread" can result in the
creation of >100k tasks (for the MSM 3.10 Linux repository, the count
was ~150k). This makes the "task stealing" mechanism in DeltaTask very
inefficient, because every attempt to steal work does a linear walk
through all tasks, searching for the one with the most work remaining,
which is O(N^2) comparisons. For the MSM 3.10 repository when all
deltas were reusable, PackWriter.parallelDeltaSearch() took
(1615+1633+1458)/3 = 1568 seconds.
The error is that DeltaTask treats the weights of objects marked as
"doNotAttemptDelta" inconsistently. It ignores the weights when
calculating "totalWeight" but uses them when partitioning the tasks.
The fix is to also ignore them when partitioning the tasks.
With this patch applied, PackWriter.parallelDeltaSearch() on the
MSM 3.10 repository when all deltas are reused went from taking
1568 seconds to 62ms (>25k speedup).
This patch also fixes a totalWeight initialization error in
DeltaTask.computeTopPaths().
Change-Id: I2ae37efa83bca42b0e716266ae6aa9d182e76d9c
Signed-off-by: Terry Parker <tparker@google.com>
Avoid leaving the reader in suspense by handling the unusual
(!RevCommit) case first. As a nice side effect, there is less nesting
to keep track of in the rest of the loop body.
No functional change intended.
Change-Id: I1580de444fccde08070f696218c12041151a924a
When the file <git-dir>/hooks/pre-push exists make sure that is is
executing during a push. The pre-push hook runs during git push, after
the remote refs have been updated but before any objects have been
transferred.
Change-Id: Ibbb58ee3227742d1a2f913134ce11e7a135c7f4c
In order to support filters in gitattributes FS.runProcess() is made
public. Support for stdin redirection has been added. Support for binary
data on stdin/stdout (as used be clean/smudge filters) has been added.
Change-Id: Ice2c152e9391368dc5748d7b825a838e3eb755f9
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Fixed random errors in discoverGitSystemConfig() on Linux where the
process error stream was closed by readPipe() before or while
GobblerThread was reading from it.
Marked readPipe() as @Nullable and fixed potential NPE in
discoverGitSystemConfig() on readPipe() return value.
Fixed process error output randomly mixed with other threads log
messages.
Change-Id: Id882af2762cfb75f010f693b2e1c46eb6968ee82
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Add comments and rename variables in PackWriterBitmapPreparer to improve
readability.
Change-Id: I49e7a1c35307298f7bc32ebfc46ab08e94290125
Signed-off-by: Terry Parker <tparker@google.com>
Java compiler must generate synthetic access methods for private methods
and fields of the enclosing class if they are accessed from inner
classes and vice versa.
While invisible in the code, those synthetic access methods exist in the
bytecode and seem to produce some extra execution overhead at runtime
(compared with the direct access to this fields or methods), see
https://git.eclipse.org/r/58948/.
By removing the "private" access modifier from affected methods and
fields we help compiler to avoid generation of synthetic access methods
and hope to improve execution performance.
To validate changes, one can either use javap or use Bytecode Outline
plugin in Eclipse. In both cases one should look for "synthetic
access$<number>" methods at the end of the class and inner class files
in question - there should be none.
NB: don't mix this "synthetic access$" methods up with "public synthetic
bridge" methods generated to allow generic method override return types.
Change-Id: I94fb481b68c84841c1db1a5ebe678b13e13c962b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Java compiler must generate synthetic access methods for private methods
and fields of the enclosing class if they are accessed from inner
classes and vice versa.
While invisible in the code, those synthetic access methods exist in the
bytecode and seem to produce some extra execution overhead at runtime
(compared with the direct access to this fields or methods), see
https://git.eclipse.org/r/58948/.
By removing the "private" access modifier from affected methods and
fields we help compiler to avoid generation of synthetic access methods
and hope to improve execution performance.
To validate changes, one can either use javap or use Bytecode Outline
plugin in Eclipse. In both cases one should look for "synthetic
access$<number>" methods at the end of the class and inner class files
in question - there should be none.
NB: don't mix this "synthetic access$" methods up with "public synthetic
bridge" methods generated to allow generic method override return types.
Change-Id: Ie7b65f251ec4452d5a5ed48aa0f272cf49a9aecd
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Java compiler must generate synthetic access methods for private methods
and fields of the enclosing class if they are accessed from inner
classes and vice versa.
While invisible in the code, those synthetic access methods exist in the
bytecode and seem to produce some extra execution overhead at runtime
(compared with the direct access to this fields or methods), see
https://git.eclipse.org/r/58948/.
By removing the "private" access modifier from affected methods and
fields we help compiler to avoid generation of synthetic access methods
and hope to improve execution performance.
To validate changes, one can either use javap or use Bytecode Outline
plugin in Eclipse. In both cases one should look for "synthetic
access$<number>" methods at the end of the class and inner class files
in question - there should be none.
NB: don't mix this "synthetic access$" methods up with "public synthetic
bridge" methods generated to allow generic method override return types.
Change-Id: I0ebaeb2bc454cd8051b901addb102c1a6688688b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Java compiler must generate synthetic access methods for private methods
and fields of the enclosing class if they are accessed from inner
classes and vice versa.
While invisible in the code, those synthetic access methods exist in the
bytecode and seem to produce some extra execution overhead at runtime
(compared with the direct access to this fields or methods), see
https://git.eclipse.org/r/58948/.
By removing the "private" access modifier from affected methods and
fields we help compiler to avoid generation of synthetic access methods
and hope to improve execution performance.
To validate changes, one can either use javap or use Bytecode Outline
plugin in Eclipse. In both cases one should look for "synthetic
access$<number>" methods at the end of the class and inner class files
in question - there should be none.
NB: don't mix this "synthetic access$" methods up with "public synthetic
bridge" methods generated to allow generic method override return types.
Change-Id: If53ec94145bae47b74e2561305afe6098012715c
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Expose the following bitmap selection parameters via PackConfig:
"bitmapContiguousCommitCount", "bitmapRecentCommitCount",
"bitmapRecentCommitSpan", "bitmapDistantCommitSpan",
"bitmapExcessiveBranchCount", and "bitmapInactiveBranchAge".
The value of bitmapContiguousCommitCount, whereby bitmaps are
created for the most recent N commits in a branch, has never
been verified. If experiments show that they are not valuable,
then we can simplify the implementation so that there is only
a concept of recent and distant commit history (defined by
"bitmapRecentCommitCount"), and the only controls we need are
"bitmapRecentCommitSpan" and "bitmapDistantCommitSpan".
Change-Id: I288bf3f97d6fbfdfcd5dde2699eff433a7307fb9
Signed-off-by: Terry Parker <tparker@google.com>
Replace the “bitmapCommitRange” parameter that was recently introduced
with two new parameters: “bitmapExcessiveBranchCount” and
“bitmapInactiveBranchAgeInDays”. If the count of branches does not
exceed “bitmapExcessiveBranchCount”, then the current algorithm is kept
for all branches.
If the branch count is excessive, then the commit time for the tip
commit for each branch is used to determine if a branch is “inactive”.
"Active" branches get full commit selection using the existing
algorithm. "Inactive" branches get fewer bitmaps near the branch tips.
Introduce a "contiguousCommitCount" parameter that always enforces that
the N most recent commits in a branch are selected for bitmaps. The
previous nextSelectionDistance() algorithm created anywhere from 1-100
contiguous bitmaps at branch tips.
For example, consider a branch with commits numbering 0-300, with 0
being the most recent commit. If the most recent 200 commits are not
merge commits and the 200th commit was the last one selected,
nextSelectionDistance() returned 100, causing commits 200-101 to be
ignored. Then a window of size 100 was evaluated, searching for merge
commits. Since no merge commits are found, the next commit (commit 0)
was selected, for a total of 1 commit in the topmost 100 commits.
If instead the 250th commit was selected, then by the same logic
commit 50 is selected. At that point nextSelectionDistance() switches to
selecting consecutive commits, so commits 0-50 in the topmost 100
commits are selected. The "contiguousCommitCount" parameter provides
more determinism by always selecting a constant number or topmost
commits.
Add an optimization to break out of the inner loop of selectCommits() if
all of the commits for the current branch have already been found.
When reusing bitmaps from an existing pack, remove unnecessary
populating and clearing of the writeBitmaps/PackBitmapIndexBuilder.
Add comments to PackWriterBitmapPreparer, rename methods and variables
for readability.
Add tests for bitmap selection with and without merge commits and with
excessive branch pruning triggered.
Note: I will follow up with an additional change that exposes the new
parameters through PackConfig.
Change-Id: I5ccbb96c8849f331c302d9f7840e05f9650c4608
Signed-off-by: Terry Parker <tparker@google.com>
Since Git 2.6 wildcard restrictions for refspecs have been loosened:
refspecs like "refs/heads/*foo:refs/heads/foo*" are valid now.
See Git commit 8d3981ccbed9fc211b4e67105015179d9d2a5692
Change-Id: Icb78afbd282c425173b3a7bc10eadc4015689bb8
Signed-off-by: Marc Strapetz <marc.strapetz@syntevo.com>
Building on top of https://git.eclipse.org/r/#/c/56391/
Here we preserve compatibility with JetS3t
and add 2 new native JGit encryption implementations.
For reference, see connection configuration files:
* Version 0: jgit-s3-connection-v-0.properties
* Version 1: jgit-s3-connection-v-1.properties
* Version 2: jgit-s3-connection-v-2.properties
Change-Id: I713290bcacbe92d88e5ef28ce137de73dd1abe2f
Signed-off-by: Andrei Pozolotin <andrei.pozolotin@gmail.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
See previous attempt: https://git.eclipse.org/r/#/c/16674/
Here we preserve as much of JetS3t mode as possible
while allowing to use new Java 8+ PBE algorithms
such as PBEWithHmacSHA512AndAES_256
Summary of changes:
* change pom.xml to control long tests
* add WalkEncryptionTest.launch to run long tests
* add AmazonS3.Keys to to normalize use of constants
* change WalkEncryption to support AES in JetS3t mode
* add WalkEncryptionTest to test remote encryption pipeline
* add support for CI configuration for live Amazon S3 testing
* add log4j based logging for tests in both Eclipse and Maven build
To test locally, check out the review branch, then:
* create amazon test configuration file
* located your home dir: ${user.home}
* named jgit-s3-config.properties
* file format follows AmazonS3 connection settings file:
accesskey = your-amazon-access-key
secretkey = your-amazon-secret-key
test.bucket = your-bucket-for-testing
* finally:
* run in Eclipse: WalkEncryptionTest.launch
* or
* run in Shell: mvn test --define test=WalkEncryptionTest
Change-Id: I6f455fd9fb4eac261ca73d0bec6a4e7dae9f2e91
Signed-off-by: Andrei Pozolotin <andrei.pozolotin@gmail.com>
If the checkout path is currently a non-empty directory (and was a link
or a regular file before), this directory will be removed before
performing checkout, but only if the checkout path is specified.
Bug: 474973
Change-Id: Ifc6c61592d9b54d26c66367163acdebea369145c
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
A bitmap index contains bitmaps for a set of commits in a pack file.
Creating a bitmap for every commit is too expensive, so heuristics
select the most "important" commits. The most recent commits are the
most valuable. To clone a repository only those for the branch tips are
needed. When fetching, only commits since the last fetch are needed.
The commit selection heuristics generally work, but for some
repositories the number of selected commits is prohibitively high. One
example is the MSM 3.10 Linux kernel. With over 1 million commits on
2820 branches, the current heuristics resulted in +36k selected commits.
Each uncompressed bitmap for that repository is ~413k, making it
difficult to complete a GC operation in available memory.
The benefit of creating bitmaps over the entire history of a repository
like the MSM 3.10 Linux kernel isn't clear. For that repository, most
history for the last year appears to be in the last 100k commits.
Limiting bitmap commit selection to just those commits reduces the count
of selected commits from ~36k to ~10.5k. Dropping bitmaps for older
commits does not affect object counting times for clones or for fetches
on clients that are reasonably up-to-date.
This patch defines a new "bitmapCommitRange" PackConfig parameter to
limit the commit selection process when building bitmaps. The range
starts with the most recent commit and walks backwards. A range of 10k
considers only the 10000 most recent commits. A range of zero creates
bitmaps only for branch tips. A range of -1 (the default) does not limit
the range--all commits in the pack are used in the commit selection
process.
Change-Id: Ied92c70cfa0778facc670e0f14a0980bed5e3bfb
Signed-off-by: Terry Parker <tparker@google.com>
On a server also running Gerrit that is using RepoCommand to
convert from an XML manifest to a git submodule superproject
periodically, it would be handy to be able to use Gerrit's
submodule subscription feature[1] to update the superproject
automatically between RepoCommand runs as changes are merged
in each subprojects.
This requires setting the 'branch' field for each submodule
so that Gerrit knows what branch to watch. Add an option to
do that.
Setting the branch field also is useful for plain Git users,
since it allows them to use "git submodule update --remote" to
manually update all submodules between RepoCommand runs.
[1] https://gerrit-review.googlesource.com/Documentation/user-submodules.html
Change-Id: I1a10861bcd0df3b3673fc2d481c8129b2bdac5f9
Signed-off-by: Stefan Beller <sbeller@google.com>
* stable-4.1:
pgm: Open RevWalk and TreeWalk in try-with-resource
ant: Open Repository and Git in try-with-resource
pgm: Create instances of Git in try-with-resource
FanoutBucket: Create ObjectInserter.Formatter in try-with-resource
Fix compiler warnings in DiffFormatter.writeGitLinkText
Change-Id: I448ecc9a1334977d9f304dd61ea20c7a8e692b10
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Clirr doesn't support Java 8 hence use japicmp instead.
See https://github.com/siom79/japicmp
Change-Id: If4b30a6d6aa849b4d6b3b0c900558c609822840c
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This patch makes JGit parsing of ignore rules containing unmatched '['
bracket compatible to the Git CLI.
Since '[' starts character group, Git tries to parse the ignore rule as
a shell glob pattern and if the character group is not closed, the glob
pattern is invalid and so the ignore rule never matches anything.
See also http://article.gmane.org/gmane.comp.version-control.git/278699.
Bug: 478490
Change-Id: I734a4d14fcdd721070e3f75d57e33c2c0700d503
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
- Remove declaration of IOException that is no longer thrown
- Add missing //$NON-NLS-1$ to prevent "Non-externalized string literal"
warning.
These warnings seem to have been introduced by If13f7b406.
Change-Id: I30058eed31b92067a6ab22e787732b08e29f8d63
Signed-off-by: David Pursehouse <david.pursehouse@sonymobile.com>
Since 4.0 we require Java 7 so there is no longer a need to override the
following methods in FS_POSIX, FS_Win32, FS_Win32_Cygwin
- lastModified()
- setLastModified()
- length()
- isSymlink()
- exists()
- isDirectory()
- isFile()
- isHidden()
Hence implement these methods in FS and remove overrides in subclasses.
Change-Id: I5dbde6ec806c66c86ac542978918361461021294
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
As discussed on https://git.eclipse.org/r/53836 it does not make sense
to have two similar utility classes in same package with intersecting
functionality. To not break the API, all methods from FileUtil are
copied to FileUtils, all FileUtil API is made deprecated and redirecting
now to FileUtils. Moved simple methods which are available in Java 7 API
are made package private and can be removed at any point later entirely
(right now they are in use).
Bug: 475070
Change-Id: Idffcf9840496c448173af7c052d8898ada68e27b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
SystemReader.isMacOs() and SystemReader.isWindows() return values are
unlikely to change during the JVM lifetime (except tests). Don't read
system properties each time the methods are called, just use previously
calculated value.
Change-Id: I495521f67a8b544e7b7247d99bbd05a42ea16d20
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
An attempt to re-implement not well documented Git CLI behavior for
patterns with backslashes.
It looks like Git silently ignores all \ characters in ignore rules, if
they are NOT covered by 3 cases described in [1]:
{quote}
1) ... Put a backslash ("\") in front of the first hash for patterns
that begin with a hash.
...
2) Trailing spaces are ignored unless they are quoted with backslash
("\").
...
3) Put a backslash ("\") in front of the first "!" for patterns that
begin with a literal "!", for example, "\!important!.txt".
{quote}
Undocumented also is the fact that backslash itself can be escaped by
backslash.
So \h\e\l\l\o\.t\x\t rule matches hello.txt and a\\\\b a\b in Git CLI.
Additionally, the glob parser [2] knows special meaning of backslash:
{quote}
One can remove the special meaning of '?', '*' and '[' by preceding
them by a backslash, or, in case this is part of a shell command
line, enclosing them in quotes. Between brackets these characters
stand for themselves. Thus, "[[?*\]" matches the four characters
'[', '?', '*' and '\'.
{quote}
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
[2] http://man7.org/linux/man-pages/man7/glob.7.html
Bug: 478065
Change-Id: I3dc973475d1943c5622103701fa8cb3ea0684e3e
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Currently we fail to properly recognize character group if the pattern
before character group contains opening bracket.
See comment from Sebastien Arod on https://git.eclipse.org/r/56678/
Change-Id: I70d3657a2a328818ea2bdc1409d18ecb3a85825b
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Current DiffFormat behavior regarding submodules (aka git links) is
incorrect. The "Subproject commit <sha1>" appears as part of the diff
header, rather than as its own hunk.
--> From JGit implementation
diff --git a/plugins/cookbook-plugin b/plugins/cookbook-plugin
index b9d3ca8..ec6ed89 160000
--- a/plugins/cookbook-plugin
+++ b/plugins/cookbook-plugin
-Subproject commit b9d3ca8a65030071e28be19296ba867ab424fbbf
+Subproject commit ec6ed89c47ba7223f82d9cb512926a6c5081343e
--> From C Git 2.5.2
diff --git a/plugins/cookbook-plugin b/plugins/cookbook-plugin
index b9d3ca8..ec6ed89 160000
--- a/plugins/cookbook-plugin
+++ b/plugins/cookbook-plugin
@@ -1 +1 @@
-Subproject commit b9d3ca8a65030071e28be19296ba867ab424fbbf
+Subproject commit ec6ed89c47ba7223f82d9cb512926a6c5081343e
The current way of processing submodules results in no hunk header and
includes the contents of the hunk as part of the headers. To fix this, we
can't just have our writeGitLinkDiffText output the hunk header. We have
to change the flow so that the raw text gets parsed as a diff. The easiest
way to do this is to fake the RawText in the FormatResult when we have a
GITLINK.
It should be noted that it seems possible for there to be a difference
between a GITLINK and a non-GITLINK, but I don't think this can happen in
practice, so I don't think we need to worry too much about it.
This patch also fixes up the test for GitLink headers, as the test was
for the old behavior. My setup has 3 other failing tests which may or
may not be the result of environmental changes. However, the same tests
fail without this commit, so I do not believe they are related.
Bug: 477759
Change-Id: If13f7b406904fad814416c93ed09ea47ef183337
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Ignore rules should escape $^(){}+| chars if using regular expressions,
because they should be treated literally if they aren't part of a
character group.
Bug: 478055
Change-Id: Ic7276442d7f8f02594b85eae1ef697362e62d3bd
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
If a client mistakenly tries to send a tag object as a shallow line
JGit blindly assumes this is a commit and tries to parse the tag
buffer using the commit parser. This can cause an obtuse error like:
InvalidObjectIdException: Invalid id: t c0ff331234...
The "t" comes from the "object c0ff331234..." line of the tag tring
to be parsed as though it where the "tree" line of a commit.
Run any client supplied shallow lines through the RevWalk to lookup
the object types. Fail fast with a protocol exception if any of them
are non-commit.
Skip objects not known to this repository. This matches behavior
with git-core's upload-pack, which sliently skips over any shallow
line object named by the client but not known by the server.
Change-Id: Ic6c57a90a42813164ce65c2244705fc42e84d700
Properties.containsKey() is the correct call here; contains() was testing
if a value is present but the key is what was meant.
Change-Id: Ice72c9f4388583e18cf8aca6e837cc4299fd07fd
When we have a URI that contains an empty path component (that is
it only contains a "/") we want to fall back to the host as
humanish name.
This change is according to the behavior of upstream git, which
falls back on the hostname when guessing directory names for
newly cloned repositories (see [1] for the discussion).
[1] http://article.gmane.org/gmane.comp.version-control.git/274669
Change-Id: I44400c6ab72a2722d2155d53d63671bd867d6c44
Signed-off-by: Patrick Steinhardt <ps@pks.im>
If no refs match the input list and we are writing to a batch,
the returned new commit from write() will match the current commit.
Adding a command to the batch for this case is harmless as it will
succeed, but it's more straightforward to just skip adding a command
in this case.
Add tests or the combination of saving matching refs and saving to a
batch.
Change-Id: I6837389b08e6c80bc2d4c9e9c506d07293ea5fb2
This header was removed unintentionally from some bundles in
3a4a5a4e57. Restore it to ensure lazy
activation of bundles.
Change-Id: I1f841f978fb93278e3ec0533a01f1363510dd976
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
In Bug 476164 it was reported that EGit doesn't start when the platform
comes with jsch 0.1.51 while this version of EGit/JGit brings jsch
0.1.53. This could be caused by outdated uses-clauses. Hence recompute
them using PDE tooling.
Bug: 476164
Change-Id: I185ba097884ead9cd034eba842bd3bf34181a99b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
It was reported in [1] that 197e3393a5 led
to a performance regression in a BFG benchmark. Analysis showed that
this is caused by the exists() method in FS_POSIX, now overriding the
default implementation in FS. The default implementation of FS.exists()
uses java.io.File.exists(), while the new implementation in FS_POSIX
uses java.nio.file.Files.exists() - by simply removing the override in
FS_POSIX, performance was restored.
Profiling showed that java.nio.file.Files.exists() is substantially
slower than java.io.File.exists(), to the point where the exists() call
doubles the average cost of a call to
ObjectDirectory.insertUnpackedObject() - which the BFG uses a lot,
because it's rewriting history. Average times measured on Ubuntu were:
java.io.File.exists() - 4 microseconds
java.nio.file.Files.exists() - 60 microseconds
The loose object exists test should be using java.io.File and not FS.
ObjectDirectory uses FS.resolve() to traverse symlinks to objects but
then once inside objects all 256 sharded directories should be real
directories, and the object files should be real files, not dangling
symlinks. java.io.File.exists() is sufficient here, and faster.
Change ObjectDirectory to use File.exists() once its computed the File
handle.
This does mean JGit cannot run ObjectDirectory code on an abstract
virtual filesystem plugged into NIO2. If you really want to run JGit on
an esoteric non-standard filesystem like "in memory" you should look at
the DFS storage backend, which has fewer abstraction points to deal
with. Or write your own from scratch.
[1] https://dev.eclipse.org/mhonarc/lists/jgit-dev/msg02954.html
Change-Id: I74684dc3957ae1ca52a7097f83a6c420aa24310f
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
- add @since annotation for new API method
- silence non-externalized String warning
Change-Id: I864176ced64e9569e7f2cdf8f777720655bfc578
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
On a local filesystem the packed-refs file will be orphaned if it is
replaced by another client while the current client is reading the old
one. However, since NFS servers do not keep track of open files, instead
of orphaning the old packed-refs file, such a replacement will cause the
old file to be garbage collected instead. A stale file handle exception
will be raised on NFS servers if the file is garbage collected (deleted)
on the server while it is being read. Since we no longer have access to
the old file in these cases, the previous code would just fail. However,
in these cases, reopening the file and rereading it will succeed (since
it will reopen the new replacement file). So retrying the read is a
viable strategy to deal with stale file handles on the packed-refs file,
implement such a strategy.
Since it is possible that the packed-refs file could be replaced again
while rereading it (multiple consecutive updates can easily occur with
ref deletions), loop on stale file handle exceptions, up to 5 extra
times, trying to read the packed-refs file again, until we either read
the new file, or find that the file no longer exists. The limit of 5 is
arbitrary, and provides a safe upper bounds to prevent infinite loops
consuming resources in a potential unforeseen persistent error
condition.
Change-Id: I085c472bafa6e2f32f610a33ddc8368bb4ab1814
Signed-off-by: Martin Fick<mfick@codeaurora.org>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Add a public API to the FileUtils to determine if an IOException is a
stale NFS file handle exception. This will make it easier to detect
such errors, and interpret them consistently throughout the codebase.
This new API is a bit more lenient in its detection than the previous
detection, and should be able to detect some errors which previously
were not identified as stale file handle exceptions because they had the
word NFS in the error message. Adjust the packfile handling code to use
this new API for detection.
Change-Id: I21f80014546ba1afec7335890e5ae79e7f521412
Signed-off-by: Martin Fick<mfick@codeaurora.org>
Signaling the need to flush() only via the interrupted status of a
copying thread doesn't work realiably with jsch. The write() method of
com.jcraft.jsch.Session catches the InterruptedException in several
places. As a result StreamCopyThread can easily miss the interrupt if it
was interrupted during the dst.write() or dst.flush() call. When it
happens, StreamCopyThread will not send some data to the remote side and
will not get the response back, because remote side will wait for more
data from us.
The flushCount field incremented during flush() method guarantees we
don't miss flush() even if jsch catches InterruptedException in
dst.write() or dst.flush() calls.
Checking the flushCount after dst.write() is needed because dst.write()
can clear interrupt status, in this case the next blocking src.read()
won't throw an exception and we will not call flush().
Flush is performed only after src.read() was blocked and thrown an
InterruptedIOException exception, this guarantees that we flush all the
data available in src so far (src.read() doesn't block while more is
available).
FlushCount is reset to 0 only when there were no flush() calls since
last blocked read, that means we flushed all data available in src. If
there were flush() calls, the interrupt status is restored, so next
blocked read will throw InterruptedException and we will flush()
again.
Change-Id: I692b226edaff502f06235ec05da9052b5fe6478a
Signed-off-by: Dmitry Neverov <dmitry.neverov@gmail.com>
There should be no functional change, the logic updated only to make
code simple so that compiler can understand what is going for. Removed
all @SuppressWarnings("null") annotations since they cannot be used if
"org.eclipse.jdt.core.compiler.problem.potentialNullReference" option is
set to the "error" level.
Bug: 470647
Change-Id: Ie93c249fa46e792198d362e531d5cbabaf41fdc4
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
- use NIO2's Files.move() to reimplement rename()
- provide a second method accepting CopyOptions which can be used to
request atomic move.
Change-Id: Ibcf722978e65745218a1ccda45344ca295911659
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
Root commits are commits with zero parents. If a commmit has no
parents it is the first commit in the repository. In general the root
commits should be unique for any given project, as the first commit
will be created at a different time, by a different user with its own
message. These root commits can be used as a "fingerprint" to
identify disjoint histories.
Change-Id: Id891dbc1f17c816cea404569578bb7635ff85cdb
The FS class and the subclasses FS_POSIX assumed in the findHook()
method that every repository has a valid gitDir. But in tests when using
in-memory-repositories this is not true and this method was generating
NPEs. Change the method to return null if no repository directory can be
determined.
Change-Id: I38a4d36dc6452b5dacae3d0dbf562b569ca3c19b
DfsGarbageCollector asks PackWriter for the set of objects packed
after the bitmap index is written out. This is now null as it was
cleared to release memory. Instead use PackBitmapIndexBuilder to
build the set as it also has the objects.
Reduce memory in PackBitmapIndexBuilder by fully discarding the
ObjectToPack instances. This was the original intent of commit
4bb523475d ("PackWriter: shed memory while creating bitmaps")
but failed as the instances were still held live here.
Switch to BlockList instead of ObjectToPack[]. This allows the
JVM to allocate many smaller arrays instead of one contiguous
array with 5.2M reference pointers. In a tight heap the smaller
allocations are more feasible.
Reduce the initial EWAHCompressedBitmaps for the 4 type maps. On
average a typical repository is 30% commits, 30% trees and 30% blobs.
These bitmaps are typically very dense. PackWriter orders objects by
commit, tree, blob when writing the file so these should always be a
very dense run of 1s with some 0s before and after. So even the 1/3rd
allocation is likely too large, but the later trim() will reduce the
internal buffer anyway.
Change-Id: If0b80a31cb00894f1485ff8f53ef7ae5a759a046
After jgit moved to Java 7 there is no need in an extra
Java7BasicAttributes class. Also all fields of Attributes can be made
final now.
Change-Id: I0be6daf7758189b0eecc4e26294bd278ed8bf7a0
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Once bitmap creation begins the internal maps required for packing are
no longer necessary. On a repository with 5.2M objects this can save
more than 438 MiB of memory by allowing the ObjectToPack instances to
get garbage collected away.
Downside is the PackWriter cannot be used for any further opertions
except to write the bitmap index. This is an acceptable trade-off as
in practice nobody uses the PackWriter after the bitmaps are built.
Change-Id: Ibfaf84b22fa0590896a398ff659a91fcf03d7128
For construction performance each new EWAHBitmap is allocated at the
roughly worst-case size the bitmap would need if all of the words must
be literal and no run length compression is available. In practice
this is far larger than is required, wasting heap memory while the
bitmaps are computed.
Trim down each bitmap to its minimum required size. This copies the
internal array to a new smaller array, allowing the GC to reclaim the
prior larger array for reuse.
A single bitmap of 5.2M bits is only 79 KiB of memory without this
trim call but 15,000 such bitmaps is 1.1 GiB. Trimming can help fit
a larger number of bitmaps during processing.
Change-Id: I2bd19a786189db5b01c4c96f209b83de50e10c3b
The bitmap preparer only needs commit graph topology; it does not use
the message body. Allow the RevWalk to free the body after the commit
has been parsed to save memory.
Change-Id: I97d4a440c9fc313873fd224bd05b9d9e3dc575db
The WorkingTreeIterator.isEntryIgnored() should use originally requested
file mode while descending to the file tree root and checking ignore
rules. Original code asking isEntryIgnored() on a file was using
directory mode instead if the .gitignore was not located in the same
directory.
Bug: 473506
Change-Id: I9f16ba714c3ea9e6585e9c11623270dbdf4fb1df
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
When during Merge for a certain path OURS & BASE contains a file and
THEIRS contains a folder there was a bug in JGit leading to unnecessary
conflicts. This commit fixes it and adds a test for this situation.
Bug: 472693
Change-Id: I71fac5a6a2ef926c01adc266c6f9b3275e870129
Also-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to [1] leading spaces are allowed in ignore rules and trailing
spaces are allowed too if they are escaped via backslash.
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
Bug: 472762
Change-Id: I5e3ae5599cb9e5d80072f38c82c20cbc9475a18a
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Catch unexpected PatternSyntaxException and convert it to
InvalidPatternException. Log such errors, do not silently ignore them.
Bug: 463581
Change-Id: Id0936d9816769ec0cfae1898beda0f7a3c146e67
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
According to [1] backslash can escape leading special characters '#' and
'!' in ignore rules, so that they are treated literally.
[1] https://www.kernel.org/pub/software/scm/git/docs/gitignore.html
Bug: 463581
Change-Id: I4c02927413a9c63ea5dbf2954877080d902ec1b2
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
While checking if we should consider an ignore rule without '[]'
brackets as a regular expression, check if the backslash escapes one of
the glob special characters '?', '*', '[', '\\'. If not, backslash is
not a part of a regex and should be treated literally.
Bug: 463581
Change-Id: I85208c7f85246fbf6c5029ce3c8b7bb8f4dbd947
Signed-off-by: Andrey Loskutov <loskutov@gmx.de>
Rather than lazily parsing the push in this method, parse it at the
end of recvCommands(), which already contains the necessary try/catch
for handling this error. This allows later callers to avoid having to
handle this condition superfluously.
Change-Id: I5dcaf1a44bf4e321adc281e3381e7e17ac89db06
Consider a BatchRefUpdate produced by Gerrit Code Review, where the
original command pushed over the wire might refer to
"refs/for/master", but that command is ignored and replaced with some
additional commands like creating "refs/changes/34/1234/1". We do not
want to store the cert in "refs/for/master@{cert}", since that may
lead someone looking to the ref to the incorrect conclusion that that
ref exists.
Add a separate put method that takes a collection of commands, and
only stores certs on those refs that have a matching command in the
cert.
Change-Id: I4661bfe2ead28a2883b33a4e3dfe579b3157d68a
Inspired by a proposal from gitolite[1], where we store a file in
a tree for each ref name, and the contents of the file is the latest
push cert to affect that ref.
The main modification from that proposal (other than lacking the
out-of-git batching) is to append "@{cert}" to filenames, which allows
storing certificates for both refs/foo and refs/foo/bar. Those
refnames cannot coexist at the same time in a repository, but we do
not want to discard the push certificate responsible for deleting the
ref, which we would have to do if refs/foo in the push cert tree
changed from a tree to a blob.
The "@{cert}" syntax is at least somewhat consistent with
gitrevisions(7) wherein @{...} describe operators on ref names.
As we cannot (currently) atomically update the push cert ref with the
refs that were updated, this operation is inherently racy. Kick the can
down the road by pushing this burden on callers.
[1] cf062b8bb6/contrib/hooks/repo-specific/save-push-signatures
Change-Id: Id3eb32416f969fba4b5e4d9c4b47053c564b0ccd
This will allow us to write the super project in a branch other than
master.
Change-Id: I578ed9ecbc6423416239e31ad644531dae9fb5c3
Signed-off-by: Yuxuan 'fishy' Wang <fishywang@google.com>
Primarily to aid in writing end-to-end tests, which must be written
outside this package as we don't currently have a Bouncy Castle
dependency.
Change-Id: Ia24179773140d9ecc616b3a6b2e630c85d800157
We have done this since forever with the "wanted old new ref" error,
so let's do it for other such errors thrown in the same block as well.
Change-Id: Ib3b1c7f05e31a5b3e40e85eb07b16736920a033b
When pushing to an HTTP server using the C git client, I observed a
certificate lacking a pushee field. Handle this gracefully in the
parser.
Change-Id: I7f3c5fa78f2e35172a93180036e679687415cac4
We intend to store received push certificates somewhere, like a
particular ref in the repository in question. For reading data back
out, it will be useful to read push certificates (without pkt-line
framing) in a streaming fashion.
Change-Id: I70de313b1ae463407b69505caee63e8f4e057ed4
Discussion on the git mailing list has concluded[1] that the intended
behavior for all (non-sideband) portions of the receive-pack protocol
is for trailing LFs in pkt-lines to be optional. Go back to using
PacketLineIn#readString() everywhere.
For push certificates specifically, we agreed that the payload signed
by the client is always concatenated with LFs even though the client
MAY omit LFs when framing the certificate for the wire. This is still
reflected in the implementation of PushCertificate#toText().
[1] http://thread.gmane.org/gmane.comp.version-control.git/273175/focus=273412
Change-Id: I817231c4d4defececb8722142fea18ff42e06e44
In most texts we use "cannot" hence instead of escaping the apostroph in
"can't" use "cannot".
Bug: 471796
Change-Id: Icda5b4db38076789d06498428909306aef3cb68b
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
ObjectId.fromString already throws InvalidObjectIdException for most
malformed object ids, but for this kind it previously threw
IllegalArgumentException. Since InvalidObjectIdException is a child of
IllegalArgumentException, callers that catch IllegalArgumentException
will continue to work.
Change-Id: I24e1422d51607c86a1cb816a495703279e461f01
Signed-off-by: Jonathan Nieder <jrn@google.com>
The invalidId message in JGitText and the asAscii bad id both contain a
colon, so the resulting message would say
Invalid id: : a78987c98798ufa
Fix it by keeping the colon in the translated message and not adding
another colon programmatically.
Noticed by code inspection.
Change-Id: I13972eebde27a4128828e6c64517666f0ba6288b
Signed-off-by: Jonathan Nieder <jrn@google.com>
Add methods that allow to unregister repositories from the
RepositoryCache individually.
Bug: 470234
Change-Id: Ib918a634d829c9898072ae7bdeb22b099a32b1c9
Signed-off-by: Tobias Oberlies <tobias.oberlies@sap.com>
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
For loose objects an expiration date can be set which will save too
young objects from being deleted. Add the same for packfiles. Packfiles
which are too young are not deleted.
Bug: 468024
Change-Id: I3956411d19b47aaadc215dab360d57fa6c24635e
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>
This may be used by e.g. a custom reflog implementation to record
this information along with the ref update.
Change-Id: I44adbfad704b76f9c1beced6e1ce82eaf71410d2
These differ subtly from a PersonIdent, because they can contain
anything that is a valid User ID passed to gpg --local-user. Upstream
git push --signed will just take the configuration value from
user.signingkey and pass that verbatim in both --local-user and the
pusher field of the certificate. This does not necessarily contain an
email address, which means the parsing implementation ends up being
substantially different from RawParseUtils.parsePersonIdent.
Nonetheless, we try hard to match PersonIdent behavior in
questionable cases.
Change-Id: I37714ce7372ccf554b24ddbff56aa61f0b19cbae
The signature is intended to be passed to a verification library such
as Bouncy Castle, which expects these lines to be present in order to
parse the signature.
Change-Id: I22097bead2746da5fc53419f79761cafd5c31c3b
This is the subclass of IOException already thrown by
BaseReceivePack#recvCommands when encountering an invalid value on
the wire. That's what PushCertificateParser is doing too, so use the
same subclass.
Change-Id: I1d323909ffe70757ea56e511556080695b1a0c11
The default behavior is to read a repository's signed push
configuration from that repo's config file, but this is not very
flexible when it comes to managing groups of repositories (e.g. with
Gerrit). Allow callers to override the configuration using a POJO.
Change-Id: Ib8f33e75daa0b2fbd000a2c4558c01c014ab1ce5
Add a missing continues to prevent falling through to the command
parsing section. The first continue happens when the command list is
empty, so change the condition to see whether we have read the first
line, rather than any commands.
Fix comparison to BEGIN_SIGNATURE to use raw line with newline.
Change-Id: If3d92f5ceade8ba7605847a4b2bc55ff17d119ac
a85e817d is a slightly breaking API change to classes that were
technically public and technically released in 4.0. However, it is
highly unlikely that people were actually depending on public behavior,
since there were no public methods to create PushCertificates with
anything other than null field values, or a PushCertificateParser that
did anything other than infinite loop or throw exceptions when reading.
Change-Id: I1d0ba9ea0a347e8ff5a0f4af169d9bb18c5838d2
Signed-off-by: Matthias Sohn <matthias.sohn@sap.com>