# Chinese (Traditional) translation of tigervnc
# Copyright (C) 2019 the TigerVNC Team (msgids)
# This file is distributed under the same license as the tigervnc package.
#
# pan93412 <pan93412@gmail.com>, 2019.
msgid ""
msgstr ""
"Project-Id-Version: tigervnc 1.11.90\n"
"Report-Msgid-Bugs-To: tigervnc-devel@googlegroups.com\n"
"POT-Creation-Date: 2021-09-08 09:19+0200\n"
"PO-Revision-Date: 2021-09-15 22:22+0800\n"
"Last-Translator: Yi-Jyun Pan <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 3.0\n"

#: vncviewer/CConn.cxx:103
#, c-format
msgid "Connected to socket %s"
msgstr "已連線到 socket %s"

#: vncviewer/CConn.cxx:110
#, c-format
msgid "Connected to host %s port %d"
msgstr "已連線到主機位址 %s (連線埠 %d)"

#: vncviewer/CConn.cxx:114
#, c-format
msgid ""
"Failed to connect to \"%s\":\n"
"\n"
"%s"
msgstr ""
"無法連線至「%s」：\n"
"\n"
"%s"

#: vncviewer/CConn.cxx:159
#, c-format
msgid "Desktop name: %.80s"
msgstr "桌面名稱：%.80s"

#: vncviewer/CConn.cxx:164
#, c-format
msgid "Host: %.80s port: %d"
msgstr "主機名稱：%.80s 連線埠：%d"

#: vncviewer/CConn.cxx:169
#, c-format
msgid "Size: %d x %d"
msgstr "大小：%d x %d"

#: vncviewer/CConn.cxx:177
#, c-format
msgid "Pixel format: %s"
msgstr "像素格式：%s"

#: vncviewer/CConn.cxx:184
#, c-format
msgid "(server default %s)"
msgstr "（伺服器預設值：%s）"

#: vncviewer/CConn.cxx:189
#, c-format
msgid "Requested encoding: %s"
msgstr "請求的編碼方式：%s"

#: vncviewer/CConn.cxx:194
#, c-format
msgid "Last used encoding: %s"
msgstr "上次使用的編碼方式：%s"

#: vncviewer/CConn.cxx:199
#, c-format
msgid "Line speed estimate: %d kbit/s"
msgstr "估計線速：%d kbit/秒"

#: vncviewer/CConn.cxx:204
#, c-format
msgid "Protocol version: %d.%d"
msgstr "協定版本：%d.%d"

#: vncviewer/CConn.cxx:209
#, c-format
msgid "Security method: %s"
msgstr "安全性方法：%s"

#: vncviewer/CConn.cxx:271 vncviewer/CConn.cxx:273
msgid "The connection was dropped by the server before the session could be established."
msgstr "在工作階段能夠建立前，連線就被伺服器丟棄。"

#: vncviewer/CConn.cxx:280 vncviewer/Viewport.cxx:575
#: vncviewer/Viewport.cxx:673 vncviewer/Viewport.cxx:776
#: vncviewer/Viewport.cxx:791 vncviewer/Viewport.cxx:802
#: vncviewer/Viewport.cxx:830 vncviewer/Viewport.cxx:901
#: vncviewer/Viewport.cxx:937
#, c-format
msgid ""
"An unexpected error occurred when communicating with the server:\n"
"\n"
"%s"
msgstr ""
"與伺服器通訊時發生非預期的錯誤：\n"
"\n"
"%s"

#: vncviewer/CConn.cxx:333
#, c-format
msgid "SetDesktopSize failed: %d"
msgstr "執行 SetDesktopSize 失敗：%d"

#: vncviewer/CConn.cxx:405
msgid "Invalid SetColourMapEntries from server!"
msgstr "伺服器傳來無效的 SetColourMapEntries！"

#: vncviewer/CConn.cxx:513
#, c-format
msgid "Throughput %d kbit/s - changing to quality %d"
msgstr "輸送量 %d kbit/秒 - 將品質等級變更至 %d"

#: vncviewer/CConn.cxx:535
#, c-format
msgid "Throughput %d kbit/s - full color is now enabled"
msgstr "輸送量 %d kbit/秒 - 全彩模式現已啟用"

#: vncviewer/CConn.cxx:538
#, c-format
msgid "Throughput %d kbit/s - full color is now disabled"
msgstr "輸送量 %d kbit/秒 - 全彩模式現已停用"

#: vncviewer/CConn.cxx:564
#, c-format
msgid "Using pixel format %s"
msgstr "使用像素格式 %s"

#: vncviewer/DesktopWindow.cxx:143
msgid "Invalid geometry specified!"
msgstr "指定了無效的幾何大小！"

#: vncviewer/DesktopWindow.cxx:616
msgid "Adjusting window size to avoid accidental full screen request"
msgstr "將調整視窗大小以避免非預期的全螢幕請求"

#: vncviewer/DesktopWindow.cxx:667
#, c-format
msgid "Press %s to open the context menu"
msgstr "按下 %s 鍵開啟內容選單"

#: vncviewer/DesktopWindow.cxx:1030 vncviewer/DesktopWindow.cxx:1038
#: vncviewer/DesktopWindow.cxx:1058
msgid "Failure grabbing keyboard"
msgstr "擷取鍵盤失敗"

#: vncviewer/DesktopWindow.cxx:1352
msgid "Invalid screen layout computed for resize request!"
msgstr "為縮放請求計算的螢幕版面配置無效！"

#: vncviewer/EmulateMB.cxx:226 vncviewer/EmulateMB.cxx:289
#, fuzzy
msgid "Invalid state for 3 button emulation"
msgstr "無效的 3 按鈕模擬狀態"

#: vncviewer/MonitorArrangement.cxx:403
msgid "Failed to get monitor name because X11 RandR could not be found"
msgstr "因找不到 X11 RandR 而無法取得顯示器名稱"

#: vncviewer/MonitorArrangement.cxx:409
#: vncviewer/MonitorIndicesParameter.cxx:47
#: vncviewer/MonitorIndicesParameter.cxx:100
msgid "Failed to get system monitor configuration"
msgstr "無法取得系統顯示器設定"

#: vncviewer/MonitorArrangement.cxx:417
#, c-format
msgid "Failed to get information about CRTC %d"
msgstr "無法取得 CRTC %d 的資訊"

#: vncviewer/MonitorArrangement.cxx:430
#, c-format
msgid "Failed to get information about output %d for CRTC %d"
msgstr "無法取得 CRTC %2$d 輸出 %1$d 的資訊"

#: vncviewer/MonitorIndicesParameter.cxx:78
#, c-format
msgid "Invalid configuration specified for %s"
msgstr ""

#: vncviewer/MonitorIndicesParameter.cxx:86
#, c-format
msgid "Monitor index %d does not exist"
msgstr "沒有索引編號是 %d 的顯示器"

#: vncviewer/MonitorIndicesParameter.cxx:164
#: vncviewer/MonitorIndicesParameter.cxx:184
#, c-format
msgid "Invalid monitor index '%s'"
msgstr "顯示器索引編號 ‘%s’ 無效"

#: vncviewer/MonitorIndicesParameter.cxx:172
#, c-format
msgid "Unexpected character '%c'"
msgstr "遇到非預期字元 ‘%c’"

#: vncviewer/OptionsDialog.cxx:58
msgid "VNC Viewer: Connection Options"
msgstr "VNC 檢視器：連線設定"

#: vncviewer/OptionsDialog.cxx:84 vncviewer/ServerDialog.cxx:109
#: vncviewer/vncviewer.cxx:418
msgid "Cancel"
msgstr "取消"

#: vncviewer/OptionsDialog.cxx:89 vncviewer/vncviewer.cxx:417
msgid "OK"
msgstr "確認"

#: vncviewer/OptionsDialog.cxx:447
msgid "Compression"
msgstr "壓縮模式"

#: vncviewer/OptionsDialog.cxx:463
msgid "Auto select"
msgstr "自動選擇"

#: vncviewer/OptionsDialog.cxx:475
msgid "Preferred encoding"
msgstr "偏好編碼方式"

#: vncviewer/OptionsDialog.cxx:523
msgid "Color level"
msgstr "色彩等級"

#: vncviewer/OptionsDialog.cxx:534
msgid "Full"
msgstr "完整"

#: vncviewer/OptionsDialog.cxx:541
msgid "Medium"
msgstr "中量"

#: vncviewer/OptionsDialog.cxx:548
msgid "Low"
msgstr "少量"

#: vncviewer/OptionsDialog.cxx:555
msgid "Very low"
msgstr "極少"

#: vncviewer/OptionsDialog.cxx:572
msgid "Custom compression level:"
msgstr "自訂壓縮等級："

#: vncviewer/OptionsDialog.cxx:578
msgid "level (0=fast, 9=best)"
msgstr "級別 (0=速度最快、9=品質最好)"

#: vncviewer/OptionsDialog.cxx:585
msgid "Allow JPEG compression:"
msgstr "允許 JPEG 壓縮方式："

#: vncviewer/OptionsDialog.cxx:591
msgid "quality (0=poor, 9=best)"
msgstr "品質 (0=最低、9=最好)"

#: vncviewer/OptionsDialog.cxx:602
msgid "Security"
msgstr "安全性"

#: vncviewer/OptionsDialog.cxx:617
msgid "Encryption"
msgstr "加密方式"

#: vncviewer/OptionsDialog.cxx:628 vncviewer/OptionsDialog.cxx:681
#: vncviewer/OptionsDialog.cxx:767
msgid "None"
msgstr "無"

#: vncviewer/OptionsDialog.cxx:634
msgid "TLS with anonymous certificates"
msgstr "使用匿名憑證的 TLS"

#: vncviewer/OptionsDialog.cxx:640
msgid "TLS with X509 certificates"
msgstr "使用 X509 憑證的 TLS"

#: vncviewer/OptionsDialog.cxx:647
msgid "Path to X509 CA certificate"
msgstr "X509 CA 憑證位置"

#: vncviewer/OptionsDialog.cxx:654
msgid "Path to X509 CRL file"
msgstr "X509 CRL 檔案位置"

#: vncviewer/OptionsDialog.cxx:670
msgid "Authentication"
msgstr "認證方式"

#: vncviewer/OptionsDialog.cxx:687
msgid "Standard VNC (insecure without encryption)"
msgstr "標準 VNC 認證方式 (若未開啟加密功能則不安全)"

#: vncviewer/OptionsDialog.cxx:693
msgid "Username and password (insecure without encryption)"
msgstr "使用者與密碼認證方式 (若未開啟加密功能則不安全)"

#: vncviewer/OptionsDialog.cxx:712
msgid "Input"
msgstr "輸入"

#: vncviewer/OptionsDialog.cxx:720
msgid "View only (ignore mouse and keyboard)"
msgstr "僅供檢視模式 (忽略滑鼠與鍵盤動作)"

#: vncviewer/OptionsDialog.cxx:726
msgid "Emulate middle mouse button"
msgstr "模擬滑鼠中鍵"

#: vncviewer/OptionsDialog.cxx:732
msgid "Accept clipboard from server"
msgstr "接受來自伺服器的剪貼簿內容"

#: vncviewer/OptionsDialog.cxx:740
msgid "Also set primary selection"
msgstr "亦設定主要選區"

#: vncviewer/OptionsDialog.cxx:747
msgid "Send clipboard to server"
msgstr "將剪貼簿內容傳至伺服器"

#: vncviewer/OptionsDialog.cxx:755
msgid "Send primary selection as clipboard"
msgstr "將主要選取區塊作為剪貼簿內容傳送"

#: vncviewer/OptionsDialog.cxx:762
msgid "Pass system keys directly to server (full screen)"
msgstr "直接將系統鍵傳至伺服器 (全螢幕模式)"

#: vncviewer/OptionsDialog.cxx:765
msgid "Menu key"
msgstr "選單鍵"

#: vncviewer/OptionsDialog.cxx:782
msgid "Screen"
msgstr "螢幕"

#: vncviewer/OptionsDialog.cxx:790
msgid "Resize remote session on connect"
msgstr "連線時調整遠端階段的大小"

#: vncviewer/OptionsDialog.cxx:803
msgid "Resize remote session to the local window"
msgstr "將遠端階段縮放至與本機視窗同大小"

#: vncviewer/OptionsDialog.cxx:809
msgid "Enable full-screen"
msgstr "啟用全螢幕"

#: vncviewer/OptionsDialog.cxx:825
msgid "Use current monitor"
msgstr "使用目前顯示器"

#: vncviewer/OptionsDialog.cxx:833
msgid "Use all monitors"
msgstr "使用所有顯示器"

#: vncviewer/OptionsDialog.cxx:841
msgid "Use selected monitor(s)"
msgstr "使用選取顯示器"

#: vncviewer/OptionsDialog.cxx:867
msgid "Misc."
msgstr "雜項設定"

#: vncviewer/OptionsDialog.cxx:875
msgid "Shared (don't disconnect other viewers)"
msgstr "共用連線 (不斷開其他檢視器的連線)"

#: vncviewer/OptionsDialog.cxx:881
msgid "Ask to reconnect on connection errors"
msgstr "詢問是否要在連接發生錯誤時重新連線"

#: vncviewer/OptionsDialog.cxx:887
msgid "Show dot when no cursor"
msgstr "若無游標則改顯示一個點"

#: vncviewer/ServerDialog.cxx:57
msgid "VNC Viewer: Connection Details"
msgstr "VNC 檢視器：連線詳細資訊"

#: vncviewer/ServerDialog.cxx:64 vncviewer/ServerDialog.cxx:69
msgid "VNC server:"
msgstr "VNC 伺服器："

#: vncviewer/ServerDialog.cxx:82
msgid "Options..."
msgstr "選項…"

#: vncviewer/ServerDialog.cxx:87
msgid "Load..."
msgstr "載入…"

#: vncviewer/ServerDialog.cxx:92
msgid "Save As..."
msgstr "另存新檔…"

#: vncviewer/ServerDialog.cxx:104
msgid "About..."
msgstr "關於…"

#: vncviewer/ServerDialog.cxx:114
msgid "Connect"
msgstr "連線"

#: vncviewer/ServerDialog.cxx:140
#, c-format
msgid ""
"Unable to load the server history:\n"
"\n"
"%s"
msgstr ""
"無法載入伺服器歷史記錄：\n"
"\n"
"%s"

#: vncviewer/ServerDialog.cxx:164 vncviewer/ServerDialog.cxx:200
msgid "TigerVNC configuration (*.tigervnc)"
msgstr "TigerVNC 組態設定 (*.tigervnc)"

#: vncviewer/ServerDialog.cxx:165
msgid "Select a TigerVNC configuration file"
msgstr "請選取 TigerVNC 組態設定檔"

#: vncviewer/ServerDialog.cxx:186 vncviewer/vncviewer.cxx:553
#, c-format
msgid ""
"Unable to load the specified configuration file:\n"
"\n"
"%s"
msgstr ""
"無法載入指定設定檔：\n"
"\n"
"%s"

#: vncviewer/ServerDialog.cxx:201
msgid "Save the TigerVNC configuration to file"
msgstr "將 TigerVNC 組態設定儲存為檔案"

#: vncviewer/ServerDialog.cxx:226
#, c-format
msgid "%s already exists. Do you want to overwrite?"
msgstr "%s 已存在，是否覆寫？"

#: vncviewer/ServerDialog.cxx:227 vncviewer/vncviewer.cxx:415
msgid "No"
msgstr "否"

#: vncviewer/ServerDialog.cxx:227
msgid "Overwrite"
msgstr "覆寫"

#: vncviewer/ServerDialog.cxx:243
#, c-format
msgid ""
"Unable to save the specified configuration file:\n"
"\n"
"%s"
msgstr ""
"無法儲存指定設定檔：\n"
"\n"
"%s"

#: vncviewer/ServerDialog.cxx:277
#, c-format
msgid ""
"Unable to save the default configuration:\n"
"\n"
"%s"
msgstr ""
"無法儲存預設設定檔：\n"
"\n"
"%s"

#: vncviewer/ServerDialog.cxx:290
#, c-format
msgid ""
"Unable to save the server history:\n"
"\n"
"%s"
msgstr ""
"無法儲存伺服器歷程記錄：\n"
"\n"
"%s"

#: vncviewer/ServerDialog.cxx:305 vncviewer/ServerDialog.cxx:368
#: vncviewer/parameters.cxx:628 vncviewer/parameters.cxx:733
#: vncviewer/vncviewer.cxx:460
msgid "Could not obtain the home directory path"
msgstr "無法取得家目錄路徑"

#: vncviewer/ServerDialog.cxx:318 vncviewer/ServerDialog.cxx:377
#: vncviewer/parameters.cxx:639 vncviewer/parameters.cxx:746
#, c-format
msgid "Could not open \"%s\": %s"
msgstr "無法開啟「%s」：%s"

#: vncviewer/ServerDialog.cxx:333 vncviewer/ServerDialog.cxx:339
#: vncviewer/parameters.cxx:760 vncviewer/parameters.cxx:766
#: vncviewer/parameters.cxx:797 vncviewer/parameters.cxx:826
#: vncviewer/parameters.cxx:832
#, c-format
msgid "Failed to read line %d in file %s: %s"
msgstr "讀取檔案 %2$s 中第 %1$d 行失敗：%3$s"

#: vncviewer/ServerDialog.cxx:340 vncviewer/parameters.cxx:767
msgid "Line too long"
msgstr "行字數過長"

#: vncviewer/UserDialog.cxx:98
msgid "Opening password file failed"
msgstr "開啟密碼檔失敗"

#: vncviewer/UserDialog.cxx:118
msgid "VNC authentication"
msgstr "VNC 認證"

#: vncviewer/UserDialog.cxx:125
msgid "This connection is secure"
msgstr "此連線階段安全"

#: vncviewer/UserDialog.cxx:129
msgid "This connection is not secure"
msgstr "此連線階段不安全"

#: vncviewer/UserDialog.cxx:146
msgid "Username:"
msgstr "使用者名稱："

#: vncviewer/UserDialog.cxx:159
msgid "Password:"
msgstr "密碼："

#: vncviewer/UserDialog.cxx:198
msgid "Authentication cancelled"
msgstr "已取消認證程序"

#: vncviewer/Viewport.cxx:390
#, c-format
msgid "Failed to update keyboard LED state: %lu"
msgstr "更新鍵盤 LED 狀態失敗：%lu"

#: vncviewer/Viewport.cxx:396 vncviewer/Viewport.cxx:402
#, c-format
msgid "Failed to update keyboard LED state: %d"
msgstr "更新鍵盤 LED 狀態失敗：%d"

#: vncviewer/Viewport.cxx:432
msgid "Failed to update keyboard LED state"
msgstr "更新鍵盤 LED 狀態失敗"

#: vncviewer/Viewport.cxx:459 vncviewer/Viewport.cxx:467
#: vncviewer/Viewport.cxx:484
#, c-format
msgid "Failed to get keyboard LED state: %d"
msgstr "取得鍵盤 LED 狀態失敗：%d"

#: vncviewer/Viewport.cxx:854
msgid "No key code specified on key press"
msgstr "沒有指定按下按鍵事件的按鍵代碼"

#: vncviewer/Viewport.cxx:1017
#, c-format
msgid "No scan code for extended virtual key 0x%02x"
msgstr "沒有對應到延伸虛擬代碼 0x%02x 的掃描碼"

#: vncviewer/Viewport.cxx:1019
#, c-format
msgid "No scan code for virtual key 0x%02x"
msgstr "沒有對應到虛擬按鍵 0x%02x 的掃描碼"

#: vncviewer/Viewport.cxx:1025
#, c-format
msgid "Invalid scan code 0x%02x"
msgstr "掃描碼 0x%02x 無效"

#: vncviewer/Viewport.cxx:1055
#, c-format
msgid "No symbol for extended virtual key 0x%02x"
msgstr "沒有對應到延伸虛擬代碼 0x%02x 的符號"

#: vncviewer/Viewport.cxx:1057
#, c-format
msgid "No symbol for virtual key 0x%02x"
msgstr "沒有對應到虛擬按鍵 0x%02x 的符號"

#: vncviewer/Viewport.cxx:1157
#, c-format
msgid "No symbol for key code 0x%02x (in the current state)"
msgstr "沒有對應到按鍵代碼 0x%02x 的符號 (目前狀態)"

#: vncviewer/Viewport.cxx:1190
#, c-format
msgid "No symbol for key code %d (in the current state)"
msgstr "沒有對應到按鍵代碼 %d 的符號 (目前狀態)"

#: vncviewer/Viewport.cxx:1250
msgctxt "ContextMenu|"
msgid "Dis&connect"
msgstr "中斷連線(&C)"

#: vncviewer/Viewport.cxx:1253
msgctxt "ContextMenu|"
msgid "&Full screen"
msgstr "全螢幕(&F)"

#: vncviewer/Viewport.cxx:1256
msgctxt "ContextMenu|"
msgid "Minimi&ze"
msgstr "最小化(&Z)"

#: vncviewer/Viewport.cxx:1258
msgctxt "ContextMenu|"
msgid "Resize &window to session"
msgstr "將視窗縮放至與連線階段同大小(&W)"

#: vncviewer/Viewport.cxx:1263
msgctxt "ContextMenu|"
msgid "&Ctrl"
msgstr "&Ctrl"

#: vncviewer/Viewport.cxx:1266
msgctxt "ContextMenu|"
msgid "&Alt"
msgstr "&Alt"

#: vncviewer/Viewport.cxx:1272
#, c-format
msgctxt "ContextMenu|"
msgid "Send %s"
msgstr "傳送 %s 鍵"

#: vncviewer/Viewport.cxx:1278
msgctxt "ContextMenu|"
msgid "Send Ctrl-Alt-&Del"
msgstr "傳送 Ctrl-Alt-&Del 鍵"

#: vncviewer/Viewport.cxx:1281
msgctxt "ContextMenu|"
msgid "&Refresh screen"
msgstr "重新整理螢幕(&R)"

#: vncviewer/Viewport.cxx:1284
msgctxt "ContextMenu|"
msgid "&Options..."
msgstr "選項(&O)…"

#: vncviewer/Viewport.cxx:1286
msgctxt "ContextMenu|"
msgid "Connection &info..."
msgstr "連線資訊(&I)…"

#: vncviewer/Viewport.cxx:1288
msgctxt "ContextMenu|"
msgid "About &TigerVNC viewer..."
msgstr "關於 TigerVNC 檢視器(&T)…"

#: vncviewer/Viewport.cxx:1377
msgid "VNC connection info"
msgstr "VNC 連線資訊"

#: vncviewer/Win32TouchHandler.cxx:47
#, fuzzy
msgid "Window is registered for touch instead of gestures"
msgstr "視窗已被註冊用於觸控而非手勢"

#: vncviewer/Win32TouchHandler.cxx:81
#, c-format
msgid "Failed to set gesture configuration (error 0x%x)"
msgstr "無法設定手勢設定（錯誤 0x%x）"

#: vncviewer/Win32TouchHandler.cxx:93
#, c-format
msgid "Failed to get gesture information (error 0x%x)"
msgstr "無法取得手勢資訊（錯誤 0x%x）"

#: vncviewer/Win32TouchHandler.cxx:358
#, c-format
msgid "Invalid mouse button %d, must be a number between 1 and 7."
msgstr "無效的滑鼠按鍵編號 %d，必須是介於 1 到 7 之間的數字。"

#: vncviewer/Win32TouchHandler.cxx:423
#, c-format
msgid "Unhandled key 0x%x - can't generate keyboard event."
msgstr "未接管的按鍵 0x%x - 無法產生鍵盤事件。"

#: vncviewer/XInputTouchHandler.cxx:102 vncviewer/touch.cxx:107
#, c-format
msgid "Unable to get X Input 2 event mask for window 0x%08lx"
msgstr "無法取得視窗 0x%08lx 的 X Input 2 事件遮罩"

#: vncviewer/XInputTouchHandler.cxx:104
#, c-format
msgid "Window 0x%08lx has no X Input 2 event mask"
msgstr "視窗 0x%08lx 沒有 X Input 2 事件遮罩"

#: vncviewer/XInputTouchHandler.cxx:112 vncviewer/touch.cxx:114
#, c-format
msgid "Window 0x%08lx has more than one X Input 2 event mask"
msgstr "視窗 0x%08lx 有超過一個 X Input 2 事件遮罩"

#: vncviewer/XInputTouchHandler.cxx:143
#, c-format
msgid "Failure grabbing device %i"
msgstr "擷取裝置 %i 失敗"

#: vncviewer/parameters.cxx:301 vncviewer/parameters.cxx:326
#: vncviewer/parameters.cxx:343 vncviewer/parameters.cxx:383
#: vncviewer/parameters.cxx:403
msgid "The name of the parameter is too large"
msgstr "參數名稱過長"

#: vncviewer/parameters.cxx:305 vncviewer/parameters.cxx:310
#: vncviewer/parameters.cxx:361
msgid "The parameter is too large"
msgstr "參數過長"

#: vncviewer/parameters.cxx:368 vncviewer/parameters.cxx:689
#: vncviewer/parameters.cxx:811
msgid "Invalid format or too large value"
msgstr "格式無效或數值過大"

#: vncviewer/parameters.cxx:422 vncviewer/parameters.cxx:453
msgid "Failed to create registry key"
msgstr "無法建立登錄機碼"

#: vncviewer/parameters.cxx:441 vncviewer/parameters.cxx:496
#: vncviewer/parameters.cxx:538 vncviewer/parameters.cxx:605
msgid "Failed to close registry key"
msgstr "無法關閉登錄機碼"

#: vncviewer/parameters.cxx:459 vncviewer/parameters.cxx:476
#: vncviewer/parameters.cxx:489 vncviewer/parameters.cxx:647
#: vncviewer/parameters.cxx:657 vncviewer/parameters.cxx:668
#, c-format
msgid "Failed to save \"%s\": %s"
msgstr "無法儲存「%s」：%s"

#: vncviewer/parameters.cxx:472 vncviewer/parameters.cxx:560
#: vncviewer/parameters.cxx:670 vncviewer/parameters.cxx:707
msgid "Unknown parameter type"
msgstr "參數類型未知"

#: vncviewer/parameters.cxx:511 vncviewer/parameters.cxx:583
msgid "Failed to open registry key"
msgstr "無法開啟登錄機碼"

#: vncviewer/parameters.cxx:528
#, c-format
msgid "Failed to read server history entry %d: %s"
msgstr "無法讀取伺服器歷史記錄的第 %d 條項目：%s"

#: vncviewer/parameters.cxx:564 vncviewer/parameters.cxx:594
#, c-format
msgid "Failed to read parameter \"%s\": %s"
msgstr "無法讀取「%s」參數：%s"

#: vncviewer/parameters.cxx:648 vncviewer/parameters.cxx:659
msgid "Could not encode parameter"
msgstr "無法對參數進行編碼"

#: vncviewer/parameters.cxx:776
#, c-format
msgid "Configuration file %s is in an invalid format"
msgstr "組態檔案 %s 格式無效"

#: vncviewer/parameters.cxx:798
msgid "Invalid format"
msgstr "格式無效"

#: vncviewer/parameters.cxx:833
msgid "Unknown parameter"
msgstr "未知參數"

#: vncviewer/touch.cxx:75
#, c-format
msgid "Got message (0x%x) for an unhandled window"
msgstr ""

#: vncviewer/touch.cxx:138 vncviewer/touch.cxx:160
#, c-format
msgid "Invalid window 0x%08lx specified for pointer grab"
msgstr ""

#: vncviewer/touch.cxx:183 vncviewer/touch.cxx:184
#, c-format
msgid "Failed to create touch handler: %s"
msgstr "無法建立觸控處理常式：%s"

#: vncviewer/touch.cxx:188
#, c-format
msgid "Couldn't attach event handler to window (error 0x%x)"
msgstr "無法將事件處理常式連接到視窗上（錯誤 0x%x）"

#: vncviewer/touch.cxx:212
msgid "Failed to get event data for X Input event"
msgstr "無法取得 X Input 事件資料"

#: vncviewer/touch.cxx:225
msgid "X Input event for unknown window"
msgstr "未知視窗的 X Input 事件"

#: vncviewer/touch.cxx:251
msgid "X Input extension not available."
msgstr "不支援 X Input 擴充方法。"

#: vncviewer/touch.cxx:258
msgid "X Input 2 (or newer) is not available."
msgstr "不支援 X Input 2（或新版）。"

#: vncviewer/touch.cxx:263
msgid "X Input 2.2 (or newer) is not available. Touch gestures will not be supported."
msgstr "不支援 X Input 2.2（或新版）。將不支援觸控手勢。"

#: vncviewer/vncviewer.cxx:106
#, c-format
msgid ""
"TigerVNC Viewer %d-bit v%s\n"
"Built on: %s\n"
"Copyright (C) 1999-%d TigerVNC Team and many others (see README.rst)\n"
"See https://www.tigervnc.org for information on TigerVNC."
msgstr ""
"TigerVNC 檢視器 (%d 位元) v%s\n"
"編譯時間：%s\n"
"版權所有 (C) 1999-%d TigerVNC 團隊以及其他人 (詳閱 README.rst)\n"
"前往 https://www.tigervnc.org 取得 TigerVNC 的相關資訊。"

#: vncviewer/vncviewer.cxx:172
msgid "About TigerVNC Viewer"
msgstr "關於 TigerVNC 檢視器"

#: vncviewer/vncviewer.cxx:193
msgid "Internal FLTK error. Exiting."
msgstr "內部 FLTK 錯誤。退出。"

#: vncviewer/vncviewer.cxx:212
#, c-format
msgid ""
"%s\n"
"\n"
"Attempt to reconnect?"
msgstr ""
"%s\n"
"\n"
"是否嘗試重新連線？"

#: vncviewer/vncviewer.cxx:243 vncviewer/vncviewer.cxx:255
#, c-format
msgid "Error starting new TigerVNC Viewer: %s"
msgstr "啟動新的 TigerVNC 檢視器時發生錯誤：%s"

#: vncviewer/vncviewer.cxx:264
#, c-format
msgid "Termination signal %d has been received. TigerVNC Viewer will now exit."
msgstr "接收到終端器信號 %d。TigerVNC 檢視器現將退出。"

#: vncviewer/vncviewer.cxx:407 vncviewer/vncviewer.desktop.in.in:3
msgid "TigerVNC Viewer"
msgstr "TigerVNC 檢視器"

#: vncviewer/vncviewer.cxx:416
msgid "Yes"
msgstr "確認"

#: vncviewer/vncviewer.cxx:419
msgid "Close"
msgstr "關閉"

#: vncviewer/vncviewer.cxx:424
msgid "About"
msgstr "關於"

#: vncviewer/vncviewer.cxx:427
msgid "Hide"
msgstr "隱藏"

#: vncviewer/vncviewer.cxx:430
msgid "Quit"
msgstr "關閉"

#: vncviewer/vncviewer.cxx:434
msgid "Services"
msgstr "服務"

#: vncviewer/vncviewer.cxx:435
msgid "Hide Others"
msgstr "隱藏其他"

#: vncviewer/vncviewer.cxx:436
msgid "Show All"
msgstr "全部顯示"

#: vncviewer/vncviewer.cxx:445
msgctxt "SysMenu|"
msgid "&File"
msgstr "檔案(&F)"

#: vncviewer/vncviewer.cxx:448
msgctxt "SysMenu|File|"
msgid "&New Connection"
msgstr "建立新連線(&N)"

#: vncviewer/vncviewer.cxx:464
#, c-format
msgid "Could not create VNC home directory: %s."
msgstr "無法建立 VNC 家目錄：%s。"

#: vncviewer/vncviewer.cxx:563
msgid "FullScreenAllMonitors is deprecated, set FullScreenMode to 'all' instead"
msgstr "已棄用 FullScreenAllMonitors，請改設定 FullScreenMode 為 'all'"

#. TRANSLATORS: "Parameters" are command line arguments, or settings
#. from a file or the Windows registry.
#: vncviewer/vncviewer.cxx:769 vncviewer/vncviewer.cxx:770
msgid "Parameters -listen and -via are incompatible"
msgstr "-listen 與 -via 參數不相容"

#: vncviewer/vncviewer.cxx:784
#, c-format
msgid "Listening on port %d"
msgstr "正於 %d 連線埠監聽"

#: vncviewer/vncviewer.cxx:817
#, c-format
msgid ""
"Failure waiting for incoming VNC connection:\n"
"\n"
"%s"
msgstr ""
"等待連入 VNC 連線時發生錯誤：\n"
"\n"
"%s"

#: vncviewer/vncviewer.desktop.in.in:4
msgid "Remote Desktop Viewer"
msgstr "遠端桌面檢視器"

#: vncviewer/vncviewer.desktop.in.in:5
msgid "Connect to VNC server and display remote desktop"
msgstr "連線到 VNC 伺服器並顯示遠端桌面"

#~ msgid "Full (all available colors)"
#~ msgstr "全彩 (所有可顯示的顏色)"

#~ msgid "Medium (256 colors)"
#~ msgstr "中等 (256 色)"

#~ msgid "Low (64 colors)"
#~ msgstr "較少 (64 色)"

#~ msgid "Very low (8 colors)"
#~ msgstr "極少 (8 色)"

#~ msgid "level (1=fast, 6=best [4-6 are rarely useful])"
#~ msgstr "等級 (1=壓縮最快、6=大小最小 [4-6 可用性較低])"

#~ msgid "Full-screen mode"
#~ msgstr "全螢幕模式"

#~ msgctxt "ContextMenu|"
#~ msgid "E&xit viewer"
#~ msgstr "退出檢視器(&X)"

#~ msgctxt "ContextMenu|"
#~ msgid "Dismiss &menu"
#~ msgstr "關閉選單(&M)"

#~ msgid "Failed to write parameter %s of type %s to the registry: %ld"
#~ msgstr "寫入參數 %s (類型 %s) 至登錄表失敗：%ld"

#~ msgid "The name of the parameter %s was too large to read from the registry"
#~ msgstr "參數 %s 之名稱過長以至於無法從登錄表讀取"

#~ msgid "The parameter %s was too large to read from the registry"
#~ msgstr "參數 %s 過長以至於無法從登錄表讀取"

#~ msgid "Failed to write configuration file, can't obtain home directory path."
#~ msgstr "寫入組態檔案失敗，無法取得家目錄路徑。"

#~ msgid "Failed to write configuration file, can't open %s: %s"
#~ msgstr "寫入組態檔案失敗，無法開啟 %s：%s"

#~ msgid "Failed to read configuration file, can't obtain home directory path."
#~ msgstr "讀取組態檔案失敗，無法取得家目錄路徑。"

#~ msgid "Unknown parameter %s on line %d in file %s"
#~ msgstr "檔案 %s 中第 %d 行發現不明參數 %s"

#~ msgid "Could not create VNC home directory: can't obtain home directory path."
#~ msgstr "無法建立 VNC 家目錄：無法取得家目錄路徑。"

#~ msgid "tigervnc"
#~ msgstr "tigervnc"

#~ msgid "Enabling continuous updates"
#~ msgstr "啟用持續更新功能"

#~ msgid "disabled"
#~ msgstr "停用"

#~ msgid "enabled"
#~ msgstr "啟用"

#~ msgid "Using %s encoding"
#~ msgstr "使用 %s 編碼方式"
