The user might not always want to use all monitors when in fullscreen
mode, but instead only a few. This commit adds support for configuring
selected monitors from command line, in the config file and graphically
in the options menu.

Because it might be hard to guarantee the consistency of monitor
identifiers coming from third-parties (for example FLTK), it has been
decided to use our own numerical identifier. This identifier is based on
the monitor's positions. The mapping between this identifier and the
indices used by FLTK is done by MonitorIndicesParameter.

Before this commit, `FullScreen` and `FullScreenAllMonitors` could be
used to configure whether to use the current monitor in fullscreen,
or all monitors in fullscreen.

This commit deprecates `FullScreenAllMonitors` in favour of
`FullScreenMode` (which can either be `current` or `all`). This allows
for additional modes to be added, without the risk of having invalid
states (for example two activate two different fullscreen modes at the
same time).

A new concept has been added; read-only parameters. They are parameters
that will be read, but never written back. This allows for migration
paths to be constructed, where a parameter can be taken to consideration
but then for example be discarded, logged or changed into something else.

This has been used for `FullScreenAllMonitors` to provide a migration
path. On startup of vncviewer, if `FullScreenAllMonitors` is enabled,
`FullScreenMode=all` will be automatically enabled instead. The next
time the configuration file is written to disk, `FullScreenAllMonitors`
will then be removed.

Let's avoid making this too complex and force every user to know about
magical functions.

This sets up a more correct session as there are key tasks that
need to be performed by PAM. E.g. systemd will allocate cgroups
and start base services.

In order to easily handle this as a system service the mapping of
displays is now done via a configuration file.

Not every mouse has three buttons e.g. laptops. Some OS might not
have support for middle mouse button emulation.

This commit adds emulation for middle mouse button when pressing both
left and right mouse button simultaneously.

Commit 4e61f8dbc5 fixed the GUI but forgot
to change the other places in the code.

Implements support in both client and server for the extended
clipboard format first seen in UltraVNC. Currently only implements
text handling, but that is still an improvement as it extends the
clipboard from ISO 8859-1 to full Unicode.

It's not common knowledge these days how X geometry is specified, and
even the man page X(7) is missing on many systems now.

Our main web site now supports https, so update all references.

We've had support for unix sockets for a while now. Make sure this
is reflected in the -help output and the man page.

Also make some minor tweaks to the section to get everything in
sync with reality.

The user can specify a tigervnc configuration file as an argument to the
viewer. Previously the viewer assumed this to be a server, but now we
will first check if there is any file matching the given argument. If
so, try to load the content of that file, like we normally do.

Fixes issue #38.

Some systems (e.g. macOS) send massive amounts of pointer events, so
we need to start rate limiting things to something sensible by default.
One event per screen refresh should be more than sufficient.

Add a new parameter 'alertOnFatalError' which guards
the displaying of the GUI alert on fatal errors, and
thus when false just gives the textual error.

Now I can do:

  while true
  do
    vncviewer alertOnFatalError=false vm:0
    sleep 1
  done

and it'll reappear when my VM appears without me getting error
dialogs.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--

Since it is caught by the local system on most platforms.

Fixes #270

We haven't supported them in a long time so we shouldn't mention
them in the interface and documentation.

Previously the incoming clipboard was unconditionally set to both
the PRIMARY and CLIPBOARD selection. This isn't always what the
user want, so make it configurable.

It's not something we're keeping up to date anyway.

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@4949 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@4666 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@4552 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@3905 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@3715 3789f03b-4d11-0410-bbf8-ca57d06f2519

minimal but still complete. The rebranding was done using a script:

find trunk -name .svn -prune -o -type f -exec rep.sh \{\} \;
pushd trunk
svn revert doc/TODO doc/registered-codes.txt doc/ft-protocol-problems.txt doc/rfbtight.tex
perl -pi -e 's|tightvnc|tigervnc|g' unix/configure.ac win/configure.ac unix/README

With rep.sh looking like:

perl -pi -e 's|TightVNC|TigerVNC|g' "$@"
perl -pi -e 's|www\.tightvnc\.com/bugs\.html|www\.tigervnc\.org|g' "$@"
perl -pi -e 's|www\.tightvnc\.com|www\.tigervnc\.org|g' "$@"
perl -pi -e 's|devteam\@tightvnc\.com|tigervnc-devel\@lists\.sourceforge\.net|g' "$@"
perl -pi -e 's|TigerVNC Team|TightVNC Team|g' "$@"
perl -pi -e 's|TigerVNC Group|TightVNC Group|g' "$@"
perl -pi -e 's|TigerVNC protocol|TightVNC protocol|g' "$@"
perl -pi -e 's|TigerVNC-specific|TightVNC-specific|g' "$@"
perl -pi -e 's|Vendor signatures: standard VNC/RealVNC, TridiaVNC, and TigerVNC|Vendor signatures: standard VNC/RealVNC, TridiaVNC, and TightVNC|g' "$@"
perl -pi -e 's|TigerVNC vendor|TightVNC vendor|g' "$@"
perl -pi -e 's|TigerVNC extension|TightVNC extension|g' "$@"
perl -pi -e 's|protocolTigerVNC|protocolTightVNC|g' "$@"
perl -pi -e 's|TigerVNC additions were|TightVNC additions were|g' "$@"
perl -pi -e 's|TigerVNC 1\.2|TightVNC 1\.2|g' "$@"
perl -pi -e 's|TigerVNC authentication type|TightVNC authentication type|g' "$@"



git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@3621 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@3046 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@620 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@590 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/branches/merge-with-vnc-4.1.1@545 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@183 3789f03b-4d11-0410-bbf8-ca57d06f2519

Documents that the Tight encoding is available.


git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@70 3789f03b-4d11-0410-bbf8-ca57d06f2519

Also, the Windows viewer now accepts arguments with both spellings.


git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@69 3789f03b-4d11-0410-bbf8-ca57d06f2519

* Changed description in README files.

* Added our copyright.

* The HTTP server presents itself as TightVNC, rather than RealVNC.

* Using registry path Software\TightVNC\WinVNC4

* Updated descriptions in resource files.


git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@67 3789f03b-4d11-0410-bbf8-ca57d06f2519

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@2 3789f03b-4d11-0410-bbf8-ca57d06f2519