[tx-robot] updated from transifex

36 files changed, 106 insertions, 60 deletions

diff --git a/apps/files/l10n/zh_HK.js b/apps/files/l10n/zh_HK.js
index 817bd870dce..269b59cb7dd 100644
--- a/apps/files/l10n/zh_HK.js
+++ b/apps/files/l10n/zh_HK.js
@@ -27,7 +27,7 @@ OC.L10N.register(
     "Target folder does not exist any more" : "目標資料夾已經不存在了",
     "Operation is blocked by access control" : "操作已被存取控制封鎖",
     "Error when assembling chunks, status code {status}" : "重組檔案片段時出錯，狀態代碼 {status}",
-    "Actions" : "動作",
+    "Actions" : "操作",
     "Rename" : "重新命名",
     "Copy" : "複製",
     "Choose target folder" : "選擇目標資料夾",
diff --git a/apps/files/l10n/zh_HK.json b/apps/files/l10n/zh_HK.json
index d759b684933..56ef1b5a1ff 100644
--- a/apps/files/l10n/zh_HK.json
+++ b/apps/files/l10n/zh_HK.json
@@ -25,7 +25,7 @@
     "Target folder does not exist any more" : "目標資料夾已經不存在了",
     "Operation is blocked by access control" : "操作已被存取控制封鎖",
     "Error when assembling chunks, status code {status}" : "重組檔案片段時出錯，狀態代碼 {status}",
-    "Actions" : "動作",
+    "Actions" : "操作",
     "Rename" : "重新命名",
     "Copy" : "複製",
     "Choose target folder" : "選擇目標資料夾",
diff --git a/apps/files_external/l10n/pl.js b/apps/files_external/l10n/pl.js
index 95bb3500782..0a0a3877903 100644
--- a/apps/files_external/l10n/pl.js
+++ b/apps/files_external/l10n/pl.js
@@ -65,7 +65,7 @@ OC.L10N.register(
     "Client secret" : "Sekret klienta",
     "OpenStack v2" : "OpenStack v2",
     "Tenant name" : "Nazwa dzierżawcy",
-    "Identity endpoint URL" : "Adres końcówki identyfikującej",
+    "Identity endpoint URL" : "Adres URL punktu końcowego tożsamości",
     "OpenStack v3" : "OpenStack v3",
     "Domain" : "Domena",
     "Rackspace" : "Rackspace",
diff --git a/apps/files_external/l10n/pl.json b/apps/files_external/l10n/pl.json
index a6ca25e2cc3..15df15e0b16 100644
--- a/apps/files_external/l10n/pl.json
+++ b/apps/files_external/l10n/pl.json
@@ -63,7 +63,7 @@
     "Client secret" : "Sekret klienta",
     "OpenStack v2" : "OpenStack v2",
     "Tenant name" : "Nazwa dzierżawcy",
-    "Identity endpoint URL" : "Adres końcówki identyfikującej",
+    "Identity endpoint URL" : "Adres URL punktu końcowego tożsamości",
     "OpenStack v3" : "OpenStack v3",
     "Domain" : "Domena",
     "Rackspace" : "Rackspace",
diff --git a/apps/files_sharing/l10n/de_DE.js b/apps/files_sharing/l10n/de_DE.js
index 987032f7674..151bdef5ea2 100644
--- a/apps/files_sharing/l10n/de_DE.js
+++ b/apps/files_sharing/l10n/de_DE.js
@@ -120,7 +120,7 @@ OC.L10N.register(
     "Sharing %s failed because the back end does not support room shares" : "Freigabe von %s fehlgeschlagen, da das Backend die Freigabe von Räumen nicht unterstützt",
     "Unknown share type" : "Unbekannter Freigabetyp",
     "Not a directory" : "Kein Verzeichnis",
-    "Could not lock node" : "Node konnte nicht gesperrt werden",
+    "Could not lock node" : "Knotenpunkt konnte nicht gesperrt werden",
     "Could not lock path" : "Pfad konnte nicht gesperrt werden",
     "Wrong or no update parameter given" : "Es wurde ein falscher oder kein Updateparameter angegeben",
     "Can't change permissions for public share links" : "Berechtigungen für öffentlich freigegebene Links konnten nicht geändert werden",
diff --git a/apps/files_sharing/l10n/de_DE.json b/apps/files_sharing/l10n/de_DE.json
index cda1207bc49..97a20c77844 100644
--- a/apps/files_sharing/l10n/de_DE.json
+++ b/apps/files_sharing/l10n/de_DE.json
@@ -118,7 +118,7 @@
     "Sharing %s failed because the back end does not support room shares" : "Freigabe von %s fehlgeschlagen, da das Backend die Freigabe von Räumen nicht unterstützt",
     "Unknown share type" : "Unbekannter Freigabetyp",
     "Not a directory" : "Kein Verzeichnis",
-    "Could not lock node" : "Node konnte nicht gesperrt werden",
+    "Could not lock node" : "Knotenpunkt konnte nicht gesperrt werden",
     "Could not lock path" : "Pfad konnte nicht gesperrt werden",
     "Wrong or no update parameter given" : "Es wurde ein falscher oder kein Updateparameter angegeben",
     "Can't change permissions for public share links" : "Berechtigungen für öffentlich freigegebene Links konnten nicht geändert werden",
diff --git a/apps/files_sharing/l10n/pt_BR.js b/apps/files_sharing/l10n/pt_BR.js
index 625edab521d..ee3a00d5420 100644
--- a/apps/files_sharing/l10n/pt_BR.js
+++ b/apps/files_sharing/l10n/pt_BR.js
@@ -113,6 +113,8 @@ OC.L10N.register(
     "Sharing %s sending the password by Nextcloud Talk failed because Nextcloud Talk is not enabled" : "O compartilhamento %s falhou ao enviar a senha ao Nextcloud Talk porque este não está ativado",
     "Invalid date, date format must be YYYY-MM-DD" : "Data inválida, o formato da data deve ser YYYY-MM-DD",
     "Sharing %1$s failed because the back end does not allow shares from type %2$s" : "O compartilhamento %1$s falhou porque a infraestrutura não permite compartilhamentos do tipo %2$s",
+    "Please specify a valid federated user id" : "Especifique um ID de usuário federado válido",
+    "Please specify a valid federated group id" : "Especifique um ID de grupo federado válido",
     "You cannot share to a Circle if the app is not enabled" : "Você não pode compartilhar para um círculo se o aplicativo não está habilitado",
     "Please specify a valid circle" : "Por favor especifique um círculo válido",
     "Sharing %s failed because the back end does not support room shares" : "Falhou ao compartilhar %s porque o sistema não suporta compartilhamento de salas",
diff --git a/apps/files_sharing/l10n/pt_BR.json b/apps/files_sharing/l10n/pt_BR.json
index 304974e6a96..948ce236b66 100644
--- a/apps/files_sharing/l10n/pt_BR.json
+++ b/apps/files_sharing/l10n/pt_BR.json
@@ -111,6 +111,8 @@
     "Sharing %s sending the password by Nextcloud Talk failed because Nextcloud Talk is not enabled" : "O compartilhamento %s falhou ao enviar a senha ao Nextcloud Talk porque este não está ativado",
     "Invalid date, date format must be YYYY-MM-DD" : "Data inválida, o formato da data deve ser YYYY-MM-DD",
     "Sharing %1$s failed because the back end does not allow shares from type %2$s" : "O compartilhamento %1$s falhou porque a infraestrutura não permite compartilhamentos do tipo %2$s",
+    "Please specify a valid federated user id" : "Especifique um ID de usuário federado válido",
+    "Please specify a valid federated group id" : "Especifique um ID de grupo federado válido",
     "You cannot share to a Circle if the app is not enabled" : "Você não pode compartilhar para um círculo se o aplicativo não está habilitado",
     "Please specify a valid circle" : "Por favor especifique um círculo válido",
     "Sharing %s failed because the back end does not support room shares" : "Falhou ao compartilhar %s porque o sistema não suporta compartilhamento de salas",
diff --git a/apps/oauth2/l10n/de_DE.js b/apps/oauth2/l10n/de_DE.js
index 1aa41461848..ef60b8c3dd3 100644
--- a/apps/oauth2/l10n/de_DE.js
+++ b/apps/oauth2/l10n/de_DE.js
@@ -4,8 +4,8 @@ OC.L10N.register(
     "Your client is not authorized to connect. Please inform the administrator of your client." : "Ihr Client ist nicht berechtigt, eine Verbindung herzustellen. Bitte informieren Sie den Administrator Ihres Clients.",
     "Your redirect URL needs to be a full URL for example: https://yourdomain.com/path" : "Die Weiterleitungs-URL muss eine vollständige URL sein. Beispiel: https://ihredomain.com/pfad",
     "OAuth 2.0" : "OAuth 2.0",
-    "Allows OAuth2 compatible authentication from other web applications." : "Ermöglicht OAuth2 komplatible Authentifizierung durch andere Web-Anwendungen.",
-    "The OAuth2 app allows administrators to configure the built-in authentication workflow to also allow OAuth2 compatible authentication from other web applications." : "Die OAuth2-App ermöglicht es Administratoren den eingebauten Authenztifizierungsablauf dahingehend zu konfigurieren, das auch ein OAuth2 komplatible Authentifizierung von anderen Web-Anwendungen aus möglich ist. ",
+    "Allows OAuth2 compatible authentication from other web applications." : "Ermöglicht OAuth2-kompatible Authentifizierung durch andere Web-Anwendungen.",
+    "The OAuth2 app allows administrators to configure the built-in authentication workflow to also allow OAuth2 compatible authentication from other web applications." : "Die OAuth2-App ermöglicht es Administratoren, den eingebauten Authentifizierungsablauf dahingehend zu konfigurieren, dass auch eine OAuth2-kompatible Authentifizierung durch andere Web-Anwendungen möglich ist. ",
     "OAuth 2.0 clients" : "OAuth 2.0-Clients",
     "OAuth 2.0 allows external services to request access to {instanceName}." : "OAuth 2.0 ermöglicht es externen Diensten, Zugriff auf {instanceName} anzufordern.",
     "Add client" : "Client hinzufügen",
diff --git a/apps/oauth2/l10n/de_DE.json b/apps/oauth2/l10n/de_DE.json
index cc53415b70b..d9fe6677e48 100644
--- a/apps/oauth2/l10n/de_DE.json
+++ b/apps/oauth2/l10n/de_DE.json
@@ -2,8 +2,8 @@
     "Your client is not authorized to connect. Please inform the administrator of your client." : "Ihr Client ist nicht berechtigt, eine Verbindung herzustellen. Bitte informieren Sie den Administrator Ihres Clients.",
     "Your redirect URL needs to be a full URL for example: https://yourdomain.com/path" : "Die Weiterleitungs-URL muss eine vollständige URL sein. Beispiel: https://ihredomain.com/pfad",
     "OAuth 2.0" : "OAuth 2.0",
-    "Allows OAuth2 compatible authentication from other web applications." : "Ermöglicht OAuth2 komplatible Authentifizierung durch andere Web-Anwendungen.",
-    "The OAuth2 app allows administrators to configure the built-in authentication workflow to also allow OAuth2 compatible authentication from other web applications." : "Die OAuth2-App ermöglicht es Administratoren den eingebauten Authenztifizierungsablauf dahingehend zu konfigurieren, das auch ein OAuth2 komplatible Authentifizierung von anderen Web-Anwendungen aus möglich ist. ",
+    "Allows OAuth2 compatible authentication from other web applications." : "Ermöglicht OAuth2-kompatible Authentifizierung durch andere Web-Anwendungen.",
+    "The OAuth2 app allows administrators to configure the built-in authentication workflow to also allow OAuth2 compatible authentication from other web applications." : "Die OAuth2-App ermöglicht es Administratoren, den eingebauten Authentifizierungsablauf dahingehend zu konfigurieren, dass auch eine OAuth2-kompatible Authentifizierung durch andere Web-Anwendungen möglich ist. ",
     "OAuth 2.0 clients" : "OAuth 2.0-Clients",
     "OAuth 2.0 allows external services to request access to {instanceName}." : "OAuth 2.0 ermöglicht es externen Diensten, Zugriff auf {instanceName} anzufordern.",
     "Add client" : "Client hinzufügen",
diff --git a/apps/settings/l10n/de_DE.js b/apps/settings/l10n/de_DE.js
index 64aed16152e..146a1381503 100644
--- a/apps/settings/l10n/de_DE.js
+++ b/apps/settings/l10n/de_DE.js
@@ -69,7 +69,7 @@ OC.L10N.register(
     "Backend doesn't support password change, but the user's encryption key was updated." : "Das Backend unterstützt die Passwortänderung nicht, aber das Verschlüsselungspasswort des Benutzers wurde aktualisiert.",
     "installing and updating apps via the app store or Federated Cloud Sharing" : "Das Installieren und Aktualisieren von Apps durch den App-Store oder durch Federated Cloud Sharing",
     "Federated Cloud Sharing" : "Federated-Cloud-Sharing",
-    "cURL is using an outdated %1$s version (%2$s). Please update your operating system or features such as %3$s will not work reliably." : "cURL verwendet eine veraltete %1$s Version (%2$s). Bitte aktualisieren Sie ihr Betriebssystem, da ansonsten Funktionen, wie z.B. %3$s, nicht zuverlässig funktionieren.",
+    "cURL is using an outdated %1$s version (%2$s). Please update your operating system or features such as %3$s will not work reliably." : "cURL verwendet eine veraltete %1$s Version (%2$s). Bitte aktualisieren Sie Ihr Betriebssystem, da ansonsten Funktionen wie z.B. %3$s nicht zuverlässig funktionieren.",
     "Could not determine if TLS version of cURL is outdated or not because an error happened during the HTTPS request against https://nextcloud.com. Please check the nextcloud log file for more details." : "Es konnte nicht festgestellt werden, ob die TLS-Version von cURL veraltet ist oder nicht, da während der HTTPS-Anforderung an https://nextcloud.com ein Fehler aufgetreten ist. Bitte überprüfen Sie die Nextcloud-Protokolldatei für weitere Einzelheiten.",
     "Invalid SMTP password." : "Ungültiges SMTP-Passwort.",
     "Email setting test" : "Test der E-Mail-Einstellungen",
@@ -107,7 +107,7 @@ OC.L10N.register(
     "Set your password" : "Setzen Sie Ihr Passwort",
     "Go to %s" : "%s aufrufen",
     "Install Client" : "Installiere den Client",
-    "Logged in user must be a subadmin" : "Der angemeldete Benutzer muss ein Administrator sein",
+    "Logged in user must be a subadmin" : "Der angemeldete Benutzer muss ein Subadministrator sein",
     "Apps" : "Apps",
     "Settings" : "Einstellungen",
     "Personal" : "Persönlich",
@@ -122,7 +122,7 @@ OC.L10N.register(
     "Create" : "Erstellen",
     "Change" : "Ändern",
     "Delete" : "Löschen",
-    "Reshare" : "Weiterteilen",
+    "Reshare" : "Weiterverbreiten",
     "Unlimited" : "Unbegrenzt",
     "Verifying" : "Überprüfe",
     "A background job is pending that checks for user imported SSL certificates. Please check back later." : "Eine Hintergrundaufgabe, die nach vom Benutzer importierten SSL-Zertifikaten sucht, läuft noch. Bitte später erneut versuchen.",
@@ -217,7 +217,7 @@ OC.L10N.register(
     "Add user in group" : "Nutzer zur Gruppe hinzufügen",
     "Set user as admin for" : "Benutzer als Administrator setzen für",
     "Select user quota" : "Benutzerkontingent auswählen",
-    "No language set" : "Keine Sprache eingestellt.",
+    "No language set" : "Keine Sprache eingestellt",
     "Delete user" : "Benutzer löschen",
     "Wipe all devices" : "Alle Geräte löschen",
     "Disable user" : "Benutzer deaktivieren",
@@ -289,7 +289,7 @@ OC.L10N.register(
     "Show user backend" : "Benutzer-Backend anzeigen",
     "Show storage path" : "Zeige Speicherpfad",
     "Send email to new user" : "E-Mail an neuen Benutzer senden",
-    "You are about to remove the group {group}. The users will NOT be deleted." : "Sie sind dabei die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.",
+    "You are about to remove the group {group}. The users will NOT be deleted." : "Sie sind im Begriff, die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.",
     "Please confirm the group removal " : "Bitte die Löschung der Gruppe bestätigen",
     "Download and enable" : "Herunterladen und aktivieren",
     "Enable" : "Aktivieren",
@@ -360,12 +360,12 @@ OC.L10N.register(
     "Last job ran %s." : "Letzte Aufgabe ausgeführt %s",
     "Background job didn’t run yet!" : "Hintergrund-Aufgabe wurde bislang nicht ausgeführt!",
     "For optimal performance it's important to configure background jobs correctly. For bigger instances 'Cron' is the recommended setting. Please see the documentation for more information." : "Um die optimale Geschwindigkeit zu erreichen ist es wichtig, dass die Hintergrund-Aktivitäten richtig konfiguriert sind. Für größere Installationen ist 'Cron' die empfohlene Einstellung. Weitere Informationen finden Sie in der Dokumentation.",
-    "Pick background job setting" : "Wähle eine Hintergrund-Aufgabeneinstellung aus",
+    "Pick background job setting" : "Wählen Sie eine Einstellung für Hintergrund-Aufgaben aus",
     "Execute one task with each page loaded." : "Eine Aufgabe bei jedem Laden einer Seite ausführen.",
     "cron.php is registered at a webcron service to call cron.php every 5 minutes over HTTP." : "cron.php ist bei einem Webcron-Dienst angemeldet, der cron.php alle 5 Minuten über HTTP aufruft.",
     "Use system cron service to call the cron.php file every 5 minutes." : "Den System-Cron-Dienst verwenden, um die Datei cron.php alle 5 Minuten aufzurufen.",
     "The cron.php needs to be executed by the system user \"%s\"." : "Die cron.php muss durch den Systemnutzer \"%s\" ausgeführt werden.",
-    "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix Erweiterung benötigt. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}. ",
+    "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix-Erweiterung benötigt. Weitere Informationen finden Sie in der {linkstart}PHP-Dokumentation{linkend}. ",
     "As admin you can fine-tune the sharing behavior. Please see the documentation for more information." : "Als Administrator können sie das Teilen-Verhalten feinabstimmen. Weitere Informationen finden Sie in der Dokumentation.",
     "Allow apps to use the Share API" : "Apps die Benutzung der Share-API erlauben",
     "Set default expiration date for shares" : "Legen Sie das Standardablaufdatum für Freigaben fest",
diff --git a/apps/settings/l10n/de_DE.json b/apps/settings/l10n/de_DE.json
index 94489d1625a..70a06ef95d1 100644
--- a/apps/settings/l10n/de_DE.json
+++ b/apps/settings/l10n/de_DE.json
@@ -67,7 +67,7 @@
     "Backend doesn't support password change, but the user's encryption key was updated." : "Das Backend unterstützt die Passwortänderung nicht, aber das Verschlüsselungspasswort des Benutzers wurde aktualisiert.",
     "installing and updating apps via the app store or Federated Cloud Sharing" : "Das Installieren und Aktualisieren von Apps durch den App-Store oder durch Federated Cloud Sharing",
     "Federated Cloud Sharing" : "Federated-Cloud-Sharing",
-    "cURL is using an outdated %1$s version (%2$s). Please update your operating system or features such as %3$s will not work reliably." : "cURL verwendet eine veraltete %1$s Version (%2$s). Bitte aktualisieren Sie ihr Betriebssystem, da ansonsten Funktionen, wie z.B. %3$s, nicht zuverlässig funktionieren.",
+    "cURL is using an outdated %1$s version (%2$s). Please update your operating system or features such as %3$s will not work reliably." : "cURL verwendet eine veraltete %1$s Version (%2$s). Bitte aktualisieren Sie Ihr Betriebssystem, da ansonsten Funktionen wie z.B. %3$s nicht zuverlässig funktionieren.",
     "Could not determine if TLS version of cURL is outdated or not because an error happened during the HTTPS request against https://nextcloud.com. Please check the nextcloud log file for more details." : "Es konnte nicht festgestellt werden, ob die TLS-Version von cURL veraltet ist oder nicht, da während der HTTPS-Anforderung an https://nextcloud.com ein Fehler aufgetreten ist. Bitte überprüfen Sie die Nextcloud-Protokolldatei für weitere Einzelheiten.",
     "Invalid SMTP password." : "Ungültiges SMTP-Passwort.",
     "Email setting test" : "Test der E-Mail-Einstellungen",
@@ -105,7 +105,7 @@
     "Set your password" : "Setzen Sie Ihr Passwort",
     "Go to %s" : "%s aufrufen",
     "Install Client" : "Installiere den Client",
-    "Logged in user must be a subadmin" : "Der angemeldete Benutzer muss ein Administrator sein",
+    "Logged in user must be a subadmin" : "Der angemeldete Benutzer muss ein Subadministrator sein",
     "Apps" : "Apps",
     "Settings" : "Einstellungen",
     "Personal" : "Persönlich",
@@ -120,7 +120,7 @@
     "Create" : "Erstellen",
     "Change" : "Ändern",
     "Delete" : "Löschen",
-    "Reshare" : "Weiterteilen",
+    "Reshare" : "Weiterverbreiten",
     "Unlimited" : "Unbegrenzt",
     "Verifying" : "Überprüfe",
     "A background job is pending that checks for user imported SSL certificates. Please check back later." : "Eine Hintergrundaufgabe, die nach vom Benutzer importierten SSL-Zertifikaten sucht, läuft noch. Bitte später erneut versuchen.",
@@ -215,7 +215,7 @@
     "Add user in group" : "Nutzer zur Gruppe hinzufügen",
     "Set user as admin for" : "Benutzer als Administrator setzen für",
     "Select user quota" : "Benutzerkontingent auswählen",
-    "No language set" : "Keine Sprache eingestellt.",
+    "No language set" : "Keine Sprache eingestellt",
     "Delete user" : "Benutzer löschen",
     "Wipe all devices" : "Alle Geräte löschen",
     "Disable user" : "Benutzer deaktivieren",
@@ -287,7 +287,7 @@
     "Show user backend" : "Benutzer-Backend anzeigen",
     "Show storage path" : "Zeige Speicherpfad",
     "Send email to new user" : "E-Mail an neuen Benutzer senden",
-    "You are about to remove the group {group}. The users will NOT be deleted." : "Sie sind dabei die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.",
+    "You are about to remove the group {group}. The users will NOT be deleted." : "Sie sind im Begriff, die Gruppe {group} zu löschen. Die Benutzer werden NICHT gelöscht.",
     "Please confirm the group removal " : "Bitte die Löschung der Gruppe bestätigen",
     "Download and enable" : "Herunterladen und aktivieren",
     "Enable" : "Aktivieren",
@@ -358,12 +358,12 @@
     "Last job ran %s." : "Letzte Aufgabe ausgeführt %s",
     "Background job didn’t run yet!" : "Hintergrund-Aufgabe wurde bislang nicht ausgeführt!",
     "For optimal performance it's important to configure background jobs correctly. For bigger instances 'Cron' is the recommended setting. Please see the documentation for more information." : "Um die optimale Geschwindigkeit zu erreichen ist es wichtig, dass die Hintergrund-Aktivitäten richtig konfiguriert sind. Für größere Installationen ist 'Cron' die empfohlene Einstellung. Weitere Informationen finden Sie in der Dokumentation.",
-    "Pick background job setting" : "Wähle eine Hintergrund-Aufgabeneinstellung aus",
+    "Pick background job setting" : "Wählen Sie eine Einstellung für Hintergrund-Aufgaben aus",
     "Execute one task with each page loaded." : "Eine Aufgabe bei jedem Laden einer Seite ausführen.",
     "cron.php is registered at a webcron service to call cron.php every 5 minutes over HTTP." : "cron.php ist bei einem Webcron-Dienst angemeldet, der cron.php alle 5 Minuten über HTTP aufruft.",
     "Use system cron service to call the cron.php file every 5 minutes." : "Den System-Cron-Dienst verwenden, um die Datei cron.php alle 5 Minuten aufzurufen.",
     "The cron.php needs to be executed by the system user \"%s\"." : "Die cron.php muss durch den Systemnutzer \"%s\" ausgeführt werden.",
-    "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix Erweiterung benötigt. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}. ",
+    "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix-Erweiterung benötigt. Weitere Informationen finden Sie in der {linkstart}PHP-Dokumentation{linkend}. ",
     "As admin you can fine-tune the sharing behavior. Please see the documentation for more information." : "Als Administrator können sie das Teilen-Verhalten feinabstimmen. Weitere Informationen finden Sie in der Dokumentation.",
     "Allow apps to use the Share API" : "Apps die Benutzung der Share-API erlauben",
     "Set default expiration date for shares" : "Legen Sie das Standardablaufdatum für Freigaben fest",
diff --git a/apps/settings/l10n/it.js b/apps/settings/l10n/it.js
index 195a2581843..39987301687 100644
--- a/apps/settings/l10n/it.js
+++ b/apps/settings/l10n/it.js
@@ -372,7 +372,7 @@ OC.L10N.register(
     "Expire after " : "Scadenza dopo",
     "days" : "giorni",
     "Enforce expiration date" : "Forza la data di scadenza",
-    "Set default expiration date for shares to other servers" : "Imposta data di scadenza predefinita per le condivisioni di altri servizi",
+    "Set default expiration date for shares to other servers" : "Imposta la data di scadenza predefinita per le condivisioni ad altri server",
     "Allow users to share via link and emails" : "Consenti agli utenti di condividere tramite collegamento e email",
     "Allow public uploads" : "Consenti caricamenti pubblici",
     "Always ask for a password" : "Chiedi sempre una password",
diff --git a/apps/settings/l10n/it.json b/apps/settings/l10n/it.json
index e3adeafe6bf..899dc30265b 100644
--- a/apps/settings/l10n/it.json
+++ b/apps/settings/l10n/it.json
@@ -370,7 +370,7 @@
     "Expire after " : "Scadenza dopo",
     "days" : "giorni",
     "Enforce expiration date" : "Forza la data di scadenza",
-    "Set default expiration date for shares to other servers" : "Imposta data di scadenza predefinita per le condivisioni di altri servizi",
+    "Set default expiration date for shares to other servers" : "Imposta la data di scadenza predefinita per le condivisioni ad altri server",
     "Allow users to share via link and emails" : "Consenti agli utenti di condividere tramite collegamento e email",
     "Allow public uploads" : "Consenti caricamenti pubblici",
     "Always ask for a password" : "Chiedi sempre una password",
diff --git a/apps/settings/l10n/ja.js b/apps/settings/l10n/ja.js
index 5c1cc36b79c..82c13500a9a 100644
--- a/apps/settings/l10n/ja.js
+++ b/apps/settings/l10n/ja.js
@@ -363,7 +363,7 @@ OC.L10N.register(
     "Pick background job setting" : "バックグラウンドジョブ設定を選択",
     "Execute one task with each page loaded." : "各ページの読み込み毎にタスクを実行します。",
     "cron.php is registered at a webcron service to call cron.php every 5 minutes over HTTP." : "cron.phpは、HTTP経由で5分ごとにcron.phpを実行するようwebcronサービスに登録されます。",
-    "Use system cron service to call the cron.php file every 5 minutes." : "システムのcronサービスを利用して、5分fごとにcron.phpファイルを実行します。",
+    "Use system cron service to call the cron.php file every 5 minutes." : "システムのcronサービスを利用して、5分ごとにcron.phpファイルを実行します。",
     "The cron.php needs to be executed by the system user \"%s\"." : "cron.php はシステムユーザー \"%s\" で実行する必要があります。",
     "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "これを実行するにはPHPのposix拡張が必要です。詳細については、{linkstart} PHPドキュメント{linkend}を参照してください。",
     "As admin you can fine-tune the sharing behavior. Please see the documentation for more information." : "管理者であれば共有時の挙動を微調整できます。詳細な情報はドキュメントを参照してください。",
diff --git a/apps/settings/l10n/ja.json b/apps/settings/l10n/ja.json
index 2b5a398deed..cc65f46df8f 100644
--- a/apps/settings/l10n/ja.json
+++ b/apps/settings/l10n/ja.json
@@ -361,7 +361,7 @@
     "Pick background job setting" : "バックグラウンドジョブ設定を選択",
     "Execute one task with each page loaded." : "各ページの読み込み毎にタスクを実行します。",
     "cron.php is registered at a webcron service to call cron.php every 5 minutes over HTTP." : "cron.phpは、HTTP経由で5分ごとにcron.phpを実行するようwebcronサービスに登録されます。",
-    "Use system cron service to call the cron.php file every 5 minutes." : "システムのcronサービスを利用して、5分fごとにcron.phpファイルを実行します。",
+    "Use system cron service to call the cron.php file every 5 minutes." : "システムのcronサービスを利用して、5分ごとにcron.phpファイルを実行します。",
     "The cron.php needs to be executed by the system user \"%s\"." : "cron.php はシステムユーザー \"%s\" で実行する必要があります。",
     "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "これを実行するにはPHPのposix拡張が必要です。詳細については、{linkstart} PHPドキュメント{linkend}を参照してください。",
     "As admin you can fine-tune the sharing behavior. Please see the documentation for more information." : "管理者であれば共有時の挙動を微調整できます。詳細な情報はドキュメントを参照してください。",
diff --git a/apps/settings/l10n/pt_BR.js b/apps/settings/l10n/pt_BR.js
index 14cdb773ed8..35a43f09046 100644
--- a/apps/settings/l10n/pt_BR.js
+++ b/apps/settings/l10n/pt_BR.js
@@ -372,6 +372,7 @@ OC.L10N.register(
     "Expire after " : "Expirar depois de",
     "days" : "dias",
     "Enforce expiration date" : "Fazer cumprir a data de expiração",
+    "Set default expiration date for shares to other servers" : "Defina a data de expiração padrão para compartilhamentos com outros servidores",
     "Allow users to share via link and emails" : "Permitir que os usuários compartilhem via link e e-mails",
     "Allow public uploads" : "Permitir envio público",
     "Always ask for a password" : "Sempre pedir a senha",
diff --git a/apps/settings/l10n/pt_BR.json b/apps/settings/l10n/pt_BR.json
index 92db045f9a1..f4812c18311 100644
--- a/apps/settings/l10n/pt_BR.json
+++ b/apps/settings/l10n/pt_BR.json
@@ -370,6 +370,7 @@
     "Expire after " : "Expirar depois de",
     "days" : "dias",
     "Enforce expiration date" : "Fazer cumprir a data de expiração",
+    "Set default expiration date for shares to other servers" : "Defina a data de expiração padrão para compartilhamentos com outros servidores",
     "Allow users to share via link and emails" : "Permitir que os usuários compartilhem via link e e-mails",
     "Allow public uploads" : "Permitir envio público",
     "Always ask for a password" : "Sempre pedir a senha",
diff --git a/apps/sharebymail/l10n/de_DE.js b/apps/sharebymail/l10n/de_DE.js
index 2dc427cdf72..a50b69f5322 100644
--- a/apps/sharebymail/l10n/de_DE.js
+++ b/apps/sharebymail/l10n/de_DE.js
@@ -46,8 +46,8 @@ OC.L10N.register(
     "You can choose a different password at any time in the share dialog." : "Im Teilen-Dialog können Sie jederzeit ein anderes Passwort wählen.",
     "Could not find share" : "Freigabe konnte nicht gefunden werden",
     "Share by mail" : "Geteilt über eine E-Mail",
-    "Share provider which allows you to share files by mail" : "Anbieter zum Teilen. Ermöglicht das Teilen von Dateien per E-Mail",
-    "Allows users to share a personalized link to a file or folder by putting in an email address." : "Ermöglicht Benutzern eine personalisierten Link zu einer Datei oder einem Ordner durch Eingabe einer E-Mail-Adresse zu teilen.",
+    "Share provider which allows you to share files by mail" : "Anbieter zum Teilen. Ermöglicht das Teilen von Dateien per E-Mail.",
+    "Allows users to share a personalized link to a file or folder by putting in an email address." : "Ermöglicht Benutzern, einen personalisierten Link zu einer Datei oder einem Ordner durch Eingabe einer E-Mail-Adresse zu teilen.",
     "Send password by mail" : "Passwort per Mail senden",
     "Reply to initiator" : "Antwort an Initiator",
     "Enforce password protection" : "Passwortschutz erzwingen"
diff --git a/apps/sharebymail/l10n/de_DE.json b/apps/sharebymail/l10n/de_DE.json
index 6ebac499ee9..7a26cf938a4 100644
--- a/apps/sharebymail/l10n/de_DE.json
+++ b/apps/sharebymail/l10n/de_DE.json
@@ -44,8 +44,8 @@
     "You can choose a different password at any time in the share dialog." : "Im Teilen-Dialog können Sie jederzeit ein anderes Passwort wählen.",
     "Could not find share" : "Freigabe konnte nicht gefunden werden",
     "Share by mail" : "Geteilt über eine E-Mail",
-    "Share provider which allows you to share files by mail" : "Anbieter zum Teilen. Ermöglicht das Teilen von Dateien per E-Mail",
-    "Allows users to share a personalized link to a file or folder by putting in an email address." : "Ermöglicht Benutzern eine personalisierten Link zu einer Datei oder einem Ordner durch Eingabe einer E-Mail-Adresse zu teilen.",
+    "Share provider which allows you to share files by mail" : "Anbieter zum Teilen. Ermöglicht das Teilen von Dateien per E-Mail.",
+    "Allows users to share a personalized link to a file or folder by putting in an email address." : "Ermöglicht Benutzern, einen personalisierten Link zu einer Datei oder einem Ordner durch Eingabe einer E-Mail-Adresse zu teilen.",
     "Send password by mail" : "Passwort per Mail senden",
     "Reply to initiator" : "Antwort an Initiator",
     "Enforce password protection" : "Passwortschutz erzwingen"
diff --git a/apps/theming/l10n/de_DE.js b/apps/theming/l10n/de_DE.js
index 3b5b93de52e..f43c22b571c 100644
--- a/apps/theming/l10n/de_DE.js
+++ b/apps/theming/l10n/de_DE.js
@@ -8,7 +8,7 @@ OC.L10N.register(
     "Name cannot be empty" : "Der Name darf nicht leer sein",
     "The given name is too long" : "Der eingegebene Name ist zu lang",
     "The given web address is too long" : "Die eingegebene Adresse ist zu lang",
-    "The given web address is not a valid URL" : "Die eingegebene Web-Adresse ist keine gültige URL",
+    "The given web address is not a valid URL" : "Die eingegebene Internet-Adresse ist keine gültige URL",
     "The given legal notice address is too long" : "Die im Impressum angegebene Adresse ist zu lang",
     "The given legal notice address is not a valid URL" : "Die eingegebene Impressums-Adresse ist keine gültige URL",
     "The given privacy policy address is too long" : "Die eingegebene Adresse der Datenschutzbestimmungen ist zu lang",
@@ -46,7 +46,7 @@ OC.L10N.register(
     "Legal notice link" : "Link zum Impressum",
     "Privacy policy link" : "Link zu den Datenschutzbestimmungen",
     "Header logo" : "Kopfbereichs-Logo",
-    "Upload new header logo" : "Neues Kopfbereichs-Logo hochladen",
+    "Upload new header logo" : "Neues Logo für den Kopfbereich hochladen",
     "Favicon" : "Favicon",
     "Upload new favicon" : "Neues Favicon hochladen",
     "Install the Imagemagick PHP extension with support for SVG images to automatically generate favicons based on the uploaded logo and color." : "Installieren Sie die Imagemagick PHP-Erweiterung mit Unterstützung für SVG-Bilder, um automatisch Favicons auf Basis des hochgeladenen Logos und der Farbe zu erstellen."
diff --git a/apps/theming/l10n/de_DE.json b/apps/theming/l10n/de_DE.json
index 7361d85d58c..bed88aca6e9 100644
--- a/apps/theming/l10n/de_DE.json
+++ b/apps/theming/l10n/de_DE.json
@@ -6,7 +6,7 @@
     "Name cannot be empty" : "Der Name darf nicht leer sein",
     "The given name is too long" : "Der eingegebene Name ist zu lang",
     "The given web address is too long" : "Die eingegebene Adresse ist zu lang",
-    "The given web address is not a valid URL" : "Die eingegebene Web-Adresse ist keine gültige URL",
+    "The given web address is not a valid URL" : "Die eingegebene Internet-Adresse ist keine gültige URL",
     "The given legal notice address is too long" : "Die im Impressum angegebene Adresse ist zu lang",
     "The given legal notice address is not a valid URL" : "Die eingegebene Impressums-Adresse ist keine gültige URL",
     "The given privacy policy address is too long" : "Die eingegebene Adresse der Datenschutzbestimmungen ist zu lang",
@@ -44,7 +44,7 @@
     "Legal notice link" : "Link zum Impressum",
     "Privacy policy link" : "Link zu den Datenschutzbestimmungen",
     "Header logo" : "Kopfbereichs-Logo",
-    "Upload new header logo" : "Neues Kopfbereichs-Logo hochladen",
+    "Upload new header logo" : "Neues Logo für den Kopfbereich hochladen",
     "Favicon" : "Favicon",
     "Upload new favicon" : "Neues Favicon hochladen",
     "Install the Imagemagick PHP extension with support for SVG images to automatically generate favicons based on the uploaded logo and color." : "Installieren Sie die Imagemagick PHP-Erweiterung mit Unterstützung für SVG-Bilder, um automatisch Favicons auf Basis des hochgeladenen Logos und der Farbe zu erstellen."
diff --git a/apps/twofactor_backupcodes/l10n/de_DE.js b/apps/twofactor_backupcodes/l10n/de_DE.js
index e54d9638614..0956d217ea0 100644
--- a/apps/twofactor_backupcodes/l10n/de_DE.js
+++ b/apps/twofactor_backupcodes/l10n/de_DE.js
@@ -2,7 +2,7 @@ OC.L10N.register(
     "twofactor_backupcodes",
     {
     "You created two-factor backup codes for your account" : "Sie haben Zwei-Faktor Sicherungs-Codes für Ihr Konto erstellt",
-    "Second-factor backup codes" : "Zweitfaktor Backup-Codes",
+    "Second-factor backup codes" : "Backup-Codes für Zweitfaktor",
     "Generate backup codes" : "Backup-Codes erzeugen",
     "You enabled two-factor authentication but did not generate backup codes yet. They are needed to restore access to your account in case you lose your second factor." : "Sie haben die Zwei-Faktor-Authentifizierung aktiviert, aber noch keine Backup-Codes erzeugt. Diese werden für den Fall benötigt, dass Sie den Zugriff auf Ihren zweiten Faktor verlieren.",
     "Backup code" : "Backup-Code",
diff --git a/apps/twofactor_backupcodes/l10n/de_DE.json b/apps/twofactor_backupcodes/l10n/de_DE.json
index 53cb4dfbe98..2c9484ff0c5 100644
--- a/apps/twofactor_backupcodes/l10n/de_DE.json
+++ b/apps/twofactor_backupcodes/l10n/de_DE.json
@@ -1,6 +1,6 @@
 { "translations": {
     "You created two-factor backup codes for your account" : "Sie haben Zwei-Faktor Sicherungs-Codes für Ihr Konto erstellt",
-    "Second-factor backup codes" : "Zweitfaktor Backup-Codes",
+    "Second-factor backup codes" : "Backup-Codes für Zweitfaktor",
     "Generate backup codes" : "Backup-Codes erzeugen",
     "You enabled two-factor authentication but did not generate backup codes yet. They are needed to restore access to your account in case you lose your second factor." : "Sie haben die Zwei-Faktor-Authentifizierung aktiviert, aber noch keine Backup-Codes erzeugt. Diese werden für den Fall benötigt, dass Sie den Zugriff auf Ihren zweiten Faktor verlieren.",
     "Backup code" : "Backup-Code",
diff --git a/apps/user_ldap/l10n/pl.js b/apps/user_ldap/l10n/pl.js
index 6489fc3bb7b..436c72ecb24 100644
--- a/apps/user_ldap/l10n/pl.js
+++ b/apps/user_ldap/l10n/pl.js
@@ -180,7 +180,7 @@ OC.L10N.register(
     "\"$home\" Placeholder Field" : "Pole zastępcze \"$home\"",
     "$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home w zewnętrznej konfiguracji pamięci zostanie zastąpiony wartością określonego atrybutu",
     "Internal Username" : "Wewnętrzna nazwa użytkownika",
-    "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ].  Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Domyślnie wewnętrzne nazwy użytkowników będą takie same jak atrybut UUID. Zapewnia to unikalność nazw użytkowników, a znaki nie muszą być konwertowane. Znaki z jakich może się składać wewnętrzna nazwa użytkownika to:  [ a-zA-Z0-9_.@- ]. Inne znaki są zastępowane przez ich odpowiedniki ASCII lub po prostu pomijane. Gdy nastąpi kolizja nazw zostanie dodany/zwiększony numer. Wewnętrzna nazwa użytkownika jest używana do identyfikacji użytkownika wewnętrznie. To również domyślna nazwa dla katalogu domowego użytkownika. To też część adresu zdalnego dla instancji dla wszystkich usług *DAV. Z tym ustawieniem domyślne zachowanie może być nadpisane. Zostaw to puste dla domyślnego zachowania. Zmiany będą miały miejsce tylko dla nowo zamapowanych (dodanych) użytkowników LDAP-a.",
+    "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ].  Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Domyślnie wewnętrzna nazwa użytkownika zostanie utworzona z atrybutu UUID. Zapewnia to unikalność nazwy użytkownika, a znaki nie muszą być konwertowane. Wewnętrzna nazwa użytkownika ma ograniczenie, dlatego dozwolone są tylko znaki: [a-zA-Z0-9_.@-]. Inne znaki są zastępowane przez ich odpowiedniki ASCII lub po prostu pomijane. W przypadku kolizji zostanie dodany/zwiększony numer. Wewnętrzna nazwa użytkownika służy do wewnętrznej identyfikacji użytkownika. Jest również domyślną nazwą katalogu domowego użytkownika oraz częścią zdalnych adresów URL, na przykład dla wszystkich usług *DAV. Dzięki temu ustawieniu można zastąpić domyślne zachowanie. Dla domyślnego zachowania pozostaw to puste. Zmiany będą miały wpływ tylko na nowo zmapowanych (dodanych) użytkowników LDAP.",
     "Internal Username Attribute:" : "Wewnętrzny atrybut nazwy uzżytkownika:",
     "Override UUID detection" : "Zastąp wykrywanie UUID",
     "By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Domyślnie, atrybut UUID jest wykrywany automatycznie. Atrybut UUID jest używany do niepodważalnej identyfikacji użytkowników i grup LDAP. Również wewnętrzna nazwa użytkownika zostanie stworzona na bazie UUID, jeśli nie zostanie podana powyżej. Możesz nadpisać to ustawienie i użyć atrybutu wedle uznania. Musisz się jednak upewnić, że atrybut ten może zostać pobrany zarówno dla użytkowników, jak i grup i jest unikalny. Pozostaw puste dla domyślnego zachowania. Zmiany będą miały wpływ tylko na nowo przypisanych (dodanych) użytkowników i grupy LDAP.",
diff --git a/apps/user_ldap/l10n/pl.json b/apps/user_ldap/l10n/pl.json
index 44b352236c4..e7b219f4e89 100644
--- a/apps/user_ldap/l10n/pl.json
+++ b/apps/user_ldap/l10n/pl.json
@@ -178,7 +178,7 @@
     "\"$home\" Placeholder Field" : "Pole zastępcze \"$home\"",
     "$home in an external storage configuration will be replaced with the value of the specified attribute" : "$home w zewnętrznej konfiguracji pamięci zostanie zastąpiony wartością określonego atrybutu",
     "Internal Username" : "Wewnętrzna nazwa użytkownika",
-    "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ].  Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Domyślnie wewnętrzne nazwy użytkowników będą takie same jak atrybut UUID. Zapewnia to unikalność nazw użytkowników, a znaki nie muszą być konwertowane. Znaki z jakich może się składać wewnętrzna nazwa użytkownika to:  [ a-zA-Z0-9_.@- ]. Inne znaki są zastępowane przez ich odpowiedniki ASCII lub po prostu pomijane. Gdy nastąpi kolizja nazw zostanie dodany/zwiększony numer. Wewnętrzna nazwa użytkownika jest używana do identyfikacji użytkownika wewnętrznie. To również domyślna nazwa dla katalogu domowego użytkownika. To też część adresu zdalnego dla instancji dla wszystkich usług *DAV. Z tym ustawieniem domyślne zachowanie może być nadpisane. Zostaw to puste dla domyślnego zachowania. Zmiany będą miały miejsce tylko dla nowo zamapowanych (dodanych) użytkowników LDAP-a.",
+    "By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ].  Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "Domyślnie wewnętrzna nazwa użytkownika zostanie utworzona z atrybutu UUID. Zapewnia to unikalność nazwy użytkownika, a znaki nie muszą być konwertowane. Wewnętrzna nazwa użytkownika ma ograniczenie, dlatego dozwolone są tylko znaki: [a-zA-Z0-9_.@-]. Inne znaki są zastępowane przez ich odpowiedniki ASCII lub po prostu pomijane. W przypadku kolizji zostanie dodany/zwiększony numer. Wewnętrzna nazwa użytkownika służy do wewnętrznej identyfikacji użytkownika. Jest również domyślną nazwą katalogu domowego użytkownika oraz częścią zdalnych adresów URL, na przykład dla wszystkich usług *DAV. Dzięki temu ustawieniu można zastąpić domyślne zachowanie. Dla domyślnego zachowania pozostaw to puste. Zmiany będą miały wpływ tylko na nowo zmapowanych (dodanych) użytkowników LDAP.",
     "Internal Username Attribute:" : "Wewnętrzny atrybut nazwy uzżytkownika:",
     "Override UUID detection" : "Zastąp wykrywanie UUID",
     "By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "Domyślnie, atrybut UUID jest wykrywany automatycznie. Atrybut UUID jest używany do niepodważalnej identyfikacji użytkowników i grup LDAP. Również wewnętrzna nazwa użytkownika zostanie stworzona na bazie UUID, jeśli nie zostanie podana powyżej. Możesz nadpisać to ustawienie i użyć atrybutu wedle uznania. Musisz się jednak upewnić, że atrybut ten może zostać pobrany zarówno dla użytkowników, jak i grup i jest unikalny. Pozostaw puste dla domyślnego zachowania. Zmiany będą miały wpływ tylko na nowo przypisanych (dodanych) użytkowników i grupy LDAP.",
diff --git a/apps/user_ldap/l10n/zh_HK.js b/apps/user_ldap/l10n/zh_HK.js
index 5982a30199f..de41d8e3367 100644
--- a/apps/user_ldap/l10n/zh_HK.js
+++ b/apps/user_ldap/l10n/zh_HK.js
@@ -86,7 +86,7 @@ OC.L10N.register(
     "LDAP / AD Email Address:" : "LDAP / AD 電郵地址：",
     "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "允許使用電郵地址屬性登入。 允許使用 “mail” 和 “mailPrimaryAddress”。",
     "Other Attributes:" : "其他屬性：",
-    "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "定義嘗試登入時要應用的過濾器。“%%uid” 取代登入操作中的用戶名。示例：“uid = %%uid”",
+    "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "定義嘗試登入時要應用的過濾器。“%%uid” 取代登入時輸入的用戶名。示例：“uid = %%uid”",
     "Test Loginname" : "測試登入姓名",
     "Verify settings" : "驗證設定",
     "%s. Server:" : "%s。伺服器：",
diff --git a/apps/user_ldap/l10n/zh_HK.json b/apps/user_ldap/l10n/zh_HK.json
index 68e18fbb989..4c0e99a6bd3 100644
--- a/apps/user_ldap/l10n/zh_HK.json
+++ b/apps/user_ldap/l10n/zh_HK.json
@@ -84,7 +84,7 @@
     "LDAP / AD Email Address:" : "LDAP / AD 電郵地址：",
     "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "允許使用電郵地址屬性登入。 允許使用 “mail” 和 “mailPrimaryAddress”。",
     "Other Attributes:" : "其他屬性：",
-    "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "定義嘗試登入時要應用的過濾器。“%%uid” 取代登入操作中的用戶名。示例：“uid = %%uid”",
+    "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "定義嘗試登入時要應用的過濾器。“%%uid” 取代登入時輸入的用戶名。示例：“uid = %%uid”",
     "Test Loginname" : "測試登入姓名",
     "Verify settings" : "驗證設定",
     "%s. Server:" : "%s。伺服器：",
diff --git a/core/l10n/ar.js b/core/l10n/ar.js
index f610d31142e..df1ba791627 100644
--- a/core/l10n/ar.js
+++ b/core/l10n/ar.js
@@ -5,6 +5,12 @@ OC.L10N.register(
     "File is too big" : "حجم الملف أكبر من المسموح",
     "The selected file is not an image." : "الملف المحدد ليس صورة ",
     "The selected file cannot be read." : "الملف المحدد لا يمكن قرأته",
+    "The file was uploaded" : "الملف تم رفعه",
+    "The file was only partially uploaded" : "الملف قد رُفع جزءا منه فقط",
+    "No file was uploaded" : "لم يتم رفع أي ملف",
+    "Missing a temporary folder" : "المجلد المؤقت غير موجود",
+    "Could not write file to disk" : "لم يستطع كتابة ملف للقرص",
+    "A PHP extension stopped the file upload" : "اضافة البي اچ بي PHP اوقفت رفع الملف",
     "Invalid file provided" : "تم تقديم ملف غير صالح",
     "No image or file provided" : "لم يتم توفير صورة أو ملف",
     "Unknown filetype" : "نوع الملف غير معروف",
@@ -139,6 +145,7 @@ OC.L10N.register(
     "Passwordless authentication is not supported in your browser." : "المصادقة بدون كلمة مرور غير مدعومة في متصفحك.",
     "Passwordless authentication is only available over a secure connection." : "المصادقة بدون كلمة مرور متاحة فقط عبر اتصال آمن.",
     "Reset password" : "تعديل كلمة السر",
+    "A password reset message has been sent to the email address of this account. If you do not receive it, check your spam/junk folders or ask your local administrator for help." : "تم إرسال رسالة إعادة تعيين كلمة المرور إلى عنوان البريد الإلكتروني لهذا الحساب. إذا لم تستلمها ، فتحقق من مجلدات البريد الغير هام / غير المرغوب فيه أو اطلب المساعدة من المسؤول المحلي.",
     "If it is not there ask your local administrator." : "إذا لم يكن هناك اسأل المسؤول التقني المحلي.",
     "Couldn't send reset email. Please contact your administrator." : "تعذر إرسال البريد الإلكتروني لإعادة التعيين. يرجى مراجعة المسؤول.",
     "Password can not be changed. Please contact your administrator." : "كلمة المرور لا يمكن تغييرها. فضلاً تحدث مع المسؤول",
diff --git a/core/l10n/ar.json b/core/l10n/ar.json
index 76a78aa1a7c..1d5482997b3 100644
--- a/core/l10n/ar.json
+++ b/core/l10n/ar.json
@@ -3,6 +3,12 @@
     "File is too big" : "حجم الملف أكبر من المسموح",
     "The selected file is not an image." : "الملف المحدد ليس صورة ",
     "The selected file cannot be read." : "الملف المحدد لا يمكن قرأته",
+    "The file was uploaded" : "الملف تم رفعه",
+    "The file was only partially uploaded" : "الملف قد رُفع جزءا منه فقط",
+    "No file was uploaded" : "لم يتم رفع أي ملف",
+    "Missing a temporary folder" : "المجلد المؤقت غير موجود",
+    "Could not write file to disk" : "لم يستطع كتابة ملف للقرص",
+    "A PHP extension stopped the file upload" : "اضافة البي اچ بي PHP اوقفت رفع الملف",
     "Invalid file provided" : "تم تقديم ملف غير صالح",
     "No image or file provided" : "لم يتم توفير صورة أو ملف",
     "Unknown filetype" : "نوع الملف غير معروف",
@@ -137,6 +143,7 @@
     "Passwordless authentication is not supported in your browser." : "المصادقة بدون كلمة مرور غير مدعومة في متصفحك.",
     "Passwordless authentication is only available over a secure connection." : "المصادقة بدون كلمة مرور متاحة فقط عبر اتصال آمن.",
     "Reset password" : "تعديل كلمة السر",
+    "A password reset message has been sent to the email address of this account. If you do not receive it, check your spam/junk folders or ask your local administrator for help." : "تم إرسال رسالة إعادة تعيين كلمة المرور إلى عنوان البريد الإلكتروني لهذا الحساب. إذا لم تستلمها ، فتحقق من مجلدات البريد الغير هام / غير المرغوب فيه أو اطلب المساعدة من المسؤول المحلي.",
     "If it is not there ask your local administrator." : "إذا لم يكن هناك اسأل المسؤول التقني المحلي.",
     "Couldn't send reset email. Please contact your administrator." : "تعذر إرسال البريد الإلكتروني لإعادة التعيين. يرجى مراجعة المسؤول.",
     "Password can not be changed. Please contact your administrator." : "كلمة المرور لا يمكن تغييرها. فضلاً تحدث مع المسؤول",
diff --git a/core/l10n/de_DE.js b/core/l10n/de_DE.js
index e888192af08..df55e1844b1 100644
--- a/core/l10n/de_DE.js
+++ b/core/l10n/de_DE.js
@@ -38,7 +38,7 @@ OC.L10N.register(
     "Some of your link shares have been removed" : "Einige Ihrer Freigabe-Links wurden entfernt",
     "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "Aufgrund eines Sicherheitsfehlers mussten einige Link-Freigaben entfernt werden. Für weitere Informationen siehe Link.",
     "The user limit of this instance is reached." : "Die Benutzergrenze dieser Instanz ist erreicht.",
-    "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Geben Sie Ihren Abonnementschlüssel ein, um die Benutzergrenze zu erhöhen. Weitere Informationen über Nextcloud für Unternehmen (Enterprise) finden Sie auf unserer Webssite.",
+    "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Geben Sie Ihren Abonnementschlüssel ein, um die Benutzergrenze zu erhöhen. Weitere Informationen über Nextcloud für Unternehmen (Enterprise) finden Sie auf unserer Webseite.",
     "Preparing update" : "Update vorbereiten",
     "[%d / %d]: %s" : "[%d / %d]: %s",
     "Repair step:" : "Reparaturschritt:",
diff --git a/core/l10n/de_DE.json b/core/l10n/de_DE.json
index d2c04230930..96adf2545a3 100644
--- a/core/l10n/de_DE.json
+++ b/core/l10n/de_DE.json
@@ -36,7 +36,7 @@
     "Some of your link shares have been removed" : "Einige Ihrer Freigabe-Links wurden entfernt",
     "Due to a security bug we had to remove some of your link shares. Please see the link for more information." : "Aufgrund eines Sicherheitsfehlers mussten einige Link-Freigaben entfernt werden. Für weitere Informationen siehe Link.",
     "The user limit of this instance is reached." : "Die Benutzergrenze dieser Instanz ist erreicht.",
-    "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Geben Sie Ihren Abonnementschlüssel ein, um die Benutzergrenze zu erhöhen. Weitere Informationen über Nextcloud für Unternehmen (Enterprise) finden Sie auf unserer Webssite.",
+    "Enter your subscription key to increase the user limit. For more information about Nextcloud Enterprise see our website." : "Geben Sie Ihren Abonnementschlüssel ein, um die Benutzergrenze zu erhöhen. Weitere Informationen über Nextcloud für Unternehmen (Enterprise) finden Sie auf unserer Webseite.",
     "Preparing update" : "Update vorbereiten",
     "[%d / %d]: %s" : "[%d / %d]: %s",
     "Repair step:" : "Reparaturschritt:",
diff --git a/core/l10n/it.js b/core/l10n/it.js
index 487d834c0ba..6479176ee05 100644
--- a/core/l10n/it.js
+++ b/core/l10n/it.js
@@ -75,6 +75,9 @@ OC.L10N.register(
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Non è stato possibile eseguire il job di cron tramite CLI. Sono apparsi i seguenti errori tecnici:",
     "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Questo server non ha una connessione a Internet funzionante: diversi dispositivi finali non sono raggiungibili. Ciò significa che alcune delle funzionalità come il montaggio di archivi esterni, le notifiche degli aggiornamenti o l'installazione di applicazioni di terze parti non funzioneranno. L'accesso remoto ai file e l'invio di email di notifica potrebbero non funzionare. Abilita la connessione a Internet del server se desideri disporre di tutte le funzionalità.",
     "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 è l'ultima versione che supporta PHP 7.2. Nextcloud 21 richiede almeno PHP 7.3.",
+    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alcuni file non hanno superato il controllo di integrità. Ulteriori informazioni su come risolvere questo problema sono disponibili nella nostra {linkstart1}documentazione ↗{linkend}. ({linkstart2}Elenco dei file non validi… {linkend} / {linkstart3}Nuova scansione…{linkend})",
+    "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "Il modulo PHP OpCache non è caricato. {linkstart}Per prestazioni migliori consigliamo ↗{linkend} di caricarlo nella tua installazione di PHP.",
+    "The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "PHP OpCache non è configurata correttamente. {linkstart}Per prestazioni migliori consigliamo ↗{linkend} di utilizzare le impostazioni seguenti in <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "La funzione PHP \"set_time_limit\" non è disponibile. Ciò potrebbe comportare l'interruzione di script durante l'esecuzione, compromettendo la tua installazione. Ti consigliamo vivamente di abilitare questa funzione.",
     "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "La tua versione di PHP non supporta FreeType. Ciò causerà problemi con le immagini dei profili e con l'interfaccia delle impostazioni.",
     "Missing index \"{indexName}\" in table \"{tableName}\"." : "Indice mancante \"{indexName}\" nella tabella \"{tableName}\".",
@@ -85,17 +88,24 @@ OC.L10N.register(
     "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Nel database mancano alcune colonne opzionali. Poiché l'aggiunta di colonne su tabelle grandi può richiedere del tempo, non sono state aggiunte automaticamente. Eseguendo \"occ db:add-missing-columns\", le colonne mancanti possono essere aggiunte manualmente mentre l'istanza è in esecuzione. Una volta che le colonne sono state aggiunte, alcune funzionalità potrebbero migliorare i tempi di risposta o l'usabilità.",
     "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Su questa istanza mancano alcuni moduli PHP consigliati. Per prestazioni migliorate e migliore compatibilità, è vivamente consigliato di installarli.",
     "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Al modulo php-imagick manca il supporto SVG. Per una migliore compatibilità si consiglia di installarlo.",
+    "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Alcune colonne del database non sono state convertite in big int. Poiché la modifica dei tipi di colonna può richiedere del tempo, non sono state modificate automaticamente. Eseguendo \"occ db:convert-filecache-bigint\", le modifiche in corso saranno applicate manualmente. L'operazione deve essere eseguita mentre l'istanza non è in linea. Per ulteriori dettagli, leggi {linkstart}la relativa pagina di documentazione{linkend}.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite è utilizzato attualmente come database. Per installazioni più grandi consigliamo di passare a un motore di database diverso.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Consigliato particolarmente quando si utilizza il client desktop per la sincronizzazione dei file.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Per migrare a un altro database, usa lo strumento da riga di comando: 'occ db:convert-type', o leggi la {linkstart}documentazione ↗{linkend}.",
     "The PHP memory limit is below the recommended value of 512MB." : "Il limite di memoria di PHP è inferiore al valore consigliato di 512MB.",
     "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Alcune applicazioni sono di proprietà di un utente diverso da quello del server web. Questo potrebbe verificarsi se le applicazioni sono state installate manualmente. Controlla i permessi delle cartelle delle seguenti applicazioni:",
+    "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL è utilizzato come database, ma non supporta caratteri di 4 byte. Per poter gestire i caratteri da 4 byte (come le emoji) senza problemi nei nomi dei file o nei commenti, si consiglia,  ad esempio,  di abilitare il supporto per i 4 byte in MySQL. Per ulteriori dettagli, leggi {linkstart}la pagina di documentazione relativa{linkend}.",
     "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Questa istanza utilizza un object store basato su S3 come archiviazione primaria. I file caricati sono memorizzati temporaneamente sul server e perciò è consigliato avere 50 GB di spazio libero nella cartella temporanea di PHP. Controlla i log per i dettagli completi sul percorso e sullo spazio disponibile. Per migliorare questo aspetto, cambia la cartella temporanea nel file php.ini o assegna altro spazio in quel percorso.",
+    "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Stai accedendo alla tua istanza tramite una connessione sicura, tuttavia la tua istanza sta generando URL non sicuri. Questo molto probabilmente significa che sei dietro un proxy inverso e le variabili di configurazione di sovrascrittura non sono impostate correttamente. Leggi {linkstart}la pagina della documentazione relativa ↗{linkend}.",
     "Error occurred while checking server setup" : "Si è verificato un errore durante il controllo della configurazione del server",
     "For more details see the {linkstart}documentation ↗{linkend}." : "Per ulteriori dettagli, leggi la {linkstart}documentazione ↗{linkend}.",
     "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "La cartella dei dati e i tuoi file sono probabilmente accessibili da Internet. Il file .htaccess non funziona. Ti consigliamo vivamente di configurare il server web in modo che la cartella dei dati non sia più accessibile o di spostare la cartella fuori dalla radice del server web.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "L'intestazione HTTP \"{header}\" non è configurata come \"{expected}\". \nQuesto è un potenziale rischio di sicurezza o di riservatezza, e noi consigliamo di modificare questa impostazione.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "L'intestazione HTTP \"{header}\" non è configurata come \"{expected}\". Alcune funzionalità potrebbero non funzionare correttamente e ti consigliamo di modificare questa impostazione.",
     "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "L'intestazione HTTP \"{header}\" non contiene \"{expected}\". Questo è un potenziale rischio di sicurezza o di riservatezza, e consigliamo di modificare questa impostazione.",
+    "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "L'intestazione HTTP \"{header}\" non è impostata a \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" o \"{val5}\". Ciò può far trapelare informazioni sul referer. Vedi la {linkstart}W3C Recommendation ↗{linkend}.",
+    "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "L'intestazione HTTP \"Strict-Transport-Security\" non è configurata con un valore di almeno \"{seconds}\" secondi. Per migliorare la sicurezza, consigliamo di abilitare HSTS come descritto nei {linkstart}consigli sulla sicurezza ↗{linkend}.",
+    "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Sei connesso a questo sito in modo non sicuro tramite HTTP. Ti consigliamo vivamente di configurare il tuo server per richiedere invece HTTPS, come descritto nei {linkstart}consigli sulla sicurezza ↗{linkend}.",
     "unknown text" : "testo sconosciuto",
     "Hello world!" : "Ciao mondo!",
     "sunny" : "soleggiato",
@@ -111,6 +121,7 @@ OC.L10N.register(
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "L'aggiornamento non è riuscito. Per ulteriori informazioni <a href=\"{url}\">controlla l'articolo del nostro forum</a> che riguarda questo problema.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "L'aggiornamento non è riuscito. Segnala il problema alla <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">comunità di Nextcloud </a>.",
     "Continue to {productName}" : "Continua in {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["L'aggiornamento è stato effettuato correttamente. Reindirizzamento a {productName} in %n secondo.","L'aggiornamento è stato effettuato correttamente. Reindirizzamento a {productName} %n secondi."],
     "Log in" : "Accedi",
     "Logging in …" : "Accesso in corso...",
     "Server side authentication failed!" : "Autenticazione lato server non riuscita!",
@@ -119,6 +130,7 @@ OC.L10N.register(
     "Please try again or contact your administrator." : "Prova ancora o contatta il tuo amministratore.",
     "Username or email" : "Nome utente o email",
     "Password" : "Password",
+    "Toggle password visibility" : "Commuta la visibilità delle password",
     "Wrong username or password." : "Nome utente o password errati.",
     "User disabled" : "Disabilitato dall'utente",
     "We have detected multiple invalid login attempts from your IP. Therefore your next login is throttled up to 30 seconds." : "Abbiamo rilevato molti tentativi di autenticazione non riusciti dal tuo indirizzo IP. Di conseguenza, il prossimo tentativo è ritardato di 30 secondi.",
@@ -126,6 +138,7 @@ OC.L10N.register(
     "Passwordless authentication is not supported in your browser." : "L'autenticazione senza password non è supportata dal tuo browser. ",
     "Passwordless authentication is only available over a secure connection." : "L'autenticazione senza password è disponibile solo su una connessione sicura.",
     "Reset password" : "Ripristina la password",
+    "A password reset message has been sent to the email address of this account. If you do not receive it, check your spam/junk folders or ask your local administrator for help." : "Abbiamo inviato un messaggio di ripristino della password all'indirizzo di posta di questo account. Se non lo ricevi, controlla le cartelle della posta indesiderata o contatta il tuo amministratore locale.",
     "If it is not there ask your local administrator." : "Se non c'è, chiedi al tuo amministratore locale.",
     "Couldn't send reset email. Please contact your administrator." : "Impossibile inviare l'email di reimpostazione. Contatta il tuo amministratore.",
     "Password can not be changed. Please contact your administrator." : "La password non può essere cambiata. Contatta il tuo amministratore.",
diff --git a/core/l10n/it.json b/core/l10n/it.json
index d84a15c351e..fc4d04366dc 100644
--- a/core/l10n/it.json
+++ b/core/l10n/it.json
@@ -73,6 +73,9 @@
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Non è stato possibile eseguire il job di cron tramite CLI. Sono apparsi i seguenti errori tecnici:",
     "This server has no working Internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the Internet to enjoy all features." : "Questo server non ha una connessione a Internet funzionante: diversi dispositivi finali non sono raggiungibili. Ciò significa che alcune delle funzionalità come il montaggio di archivi esterni, le notifiche degli aggiornamenti o l'installazione di applicazioni di terze parti non funzioneranno. L'accesso remoto ai file e l'invio di email di notifica potrebbero non funzionare. Abilita la connessione a Internet del server se desideri disporre di tutte le funzionalità.",
     "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 è l'ultima versione che supporta PHP 7.2. Nextcloud 21 richiede almeno PHP 7.3.",
+    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alcuni file non hanno superato il controllo di integrità. Ulteriori informazioni su come risolvere questo problema sono disponibili nella nostra {linkstart1}documentazione ↗{linkend}. ({linkstart2}Elenco dei file non validi… {linkend} / {linkstart3}Nuova scansione…{linkend})",
+    "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "Il modulo PHP OpCache non è caricato. {linkstart}Per prestazioni migliori consigliamo ↗{linkend} di caricarlo nella tua installazione di PHP.",
+    "The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "PHP OpCache non è configurata correttamente. {linkstart}Per prestazioni migliori consigliamo ↗{linkend} di utilizzare le impostazioni seguenti in <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "La funzione PHP \"set_time_limit\" non è disponibile. Ciò potrebbe comportare l'interruzione di script durante l'esecuzione, compromettendo la tua installazione. Ti consigliamo vivamente di abilitare questa funzione.",
     "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "La tua versione di PHP non supporta FreeType. Ciò causerà problemi con le immagini dei profili e con l'interfaccia delle impostazioni.",
     "Missing index \"{indexName}\" in table \"{tableName}\"." : "Indice mancante \"{indexName}\" nella tabella \"{tableName}\".",
@@ -83,17 +86,24 @@
     "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Nel database mancano alcune colonne opzionali. Poiché l'aggiunta di colonne su tabelle grandi può richiedere del tempo, non sono state aggiunte automaticamente. Eseguendo \"occ db:add-missing-columns\", le colonne mancanti possono essere aggiunte manualmente mentre l'istanza è in esecuzione. Una volta che le colonne sono state aggiunte, alcune funzionalità potrebbero migliorare i tempi di risposta o l'usabilità.",
     "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Su questa istanza mancano alcuni moduli PHP consigliati. Per prestazioni migliorate e migliore compatibilità, è vivamente consigliato di installarli.",
     "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "Al modulo php-imagick manca il supporto SVG. Per una migliore compatibilità si consiglia di installarlo.",
+    "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Alcune colonne del database non sono state convertite in big int. Poiché la modifica dei tipi di colonna può richiedere del tempo, non sono state modificate automaticamente. Eseguendo \"occ db:convert-filecache-bigint\", le modifiche in corso saranno applicate manualmente. L'operazione deve essere eseguita mentre l'istanza non è in linea. Per ulteriori dettagli, leggi {linkstart}la relativa pagina di documentazione{linkend}.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite è utilizzato attualmente come database. Per installazioni più grandi consigliamo di passare a un motore di database diverso.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Consigliato particolarmente quando si utilizza il client desktop per la sincronizzazione dei file.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Per migrare a un altro database, usa lo strumento da riga di comando: 'occ db:convert-type', o leggi la {linkstart}documentazione ↗{linkend}.",
     "The PHP memory limit is below the recommended value of 512MB." : "Il limite di memoria di PHP è inferiore al valore consigliato di 512MB.",
     "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Alcune applicazioni sono di proprietà di un utente diverso da quello del server web. Questo potrebbe verificarsi se le applicazioni sono state installate manualmente. Controlla i permessi delle cartelle delle seguenti applicazioni:",
+    "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL è utilizzato come database, ma non supporta caratteri di 4 byte. Per poter gestire i caratteri da 4 byte (come le emoji) senza problemi nei nomi dei file o nei commenti, si consiglia,  ad esempio,  di abilitare il supporto per i 4 byte in MySQL. Per ulteriori dettagli, leggi {linkstart}la pagina di documentazione relativa{linkend}.",
     "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Questa istanza utilizza un object store basato su S3 come archiviazione primaria. I file caricati sono memorizzati temporaneamente sul server e perciò è consigliato avere 50 GB di spazio libero nella cartella temporanea di PHP. Controlla i log per i dettagli completi sul percorso e sullo spazio disponibile. Per migliorare questo aspetto, cambia la cartella temporanea nel file php.ini o assegna altro spazio in quel percorso.",
+    "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Stai accedendo alla tua istanza tramite una connessione sicura, tuttavia la tua istanza sta generando URL non sicuri. Questo molto probabilmente significa che sei dietro un proxy inverso e le variabili di configurazione di sovrascrittura non sono impostate correttamente. Leggi {linkstart}la pagina della documentazione relativa ↗{linkend}.",
     "Error occurred while checking server setup" : "Si è verificato un errore durante il controllo della configurazione del server",
     "For more details see the {linkstart}documentation ↗{linkend}." : "Per ulteriori dettagli, leggi la {linkstart}documentazione ↗{linkend}.",
     "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "La cartella dei dati e i tuoi file sono probabilmente accessibili da Internet. Il file .htaccess non funziona. Ti consigliamo vivamente di configurare il server web in modo che la cartella dei dati non sia più accessibile o di spostare la cartella fuori dalla radice del server web.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "L'intestazione HTTP \"{header}\" non è configurata come \"{expected}\". \nQuesto è un potenziale rischio di sicurezza o di riservatezza, e noi consigliamo di modificare questa impostazione.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "L'intestazione HTTP \"{header}\" non è configurata come \"{expected}\". Alcune funzionalità potrebbero non funzionare correttamente e ti consigliamo di modificare questa impostazione.",
     "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "L'intestazione HTTP \"{header}\" non contiene \"{expected}\". Questo è un potenziale rischio di sicurezza o di riservatezza, e consigliamo di modificare questa impostazione.",
+    "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "L'intestazione HTTP \"{header}\" non è impostata a \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" o \"{val5}\". Ciò può far trapelare informazioni sul referer. Vedi la {linkstart}W3C Recommendation ↗{linkend}.",
+    "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "L'intestazione HTTP \"Strict-Transport-Security\" non è configurata con un valore di almeno \"{seconds}\" secondi. Per migliorare la sicurezza, consigliamo di abilitare HSTS come descritto nei {linkstart}consigli sulla sicurezza ↗{linkend}.",
+    "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Sei connesso a questo sito in modo non sicuro tramite HTTP. Ti consigliamo vivamente di configurare il tuo server per richiedere invece HTTPS, come descritto nei {linkstart}consigli sulla sicurezza ↗{linkend}.",
     "unknown text" : "testo sconosciuto",
     "Hello world!" : "Ciao mondo!",
     "sunny" : "soleggiato",
@@ -109,6 +119,7 @@
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "L'aggiornamento non è riuscito. Per ulteriori informazioni <a href=\"{url}\">controlla l'articolo del nostro forum</a> che riguarda questo problema.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "L'aggiornamento non è riuscito. Segnala il problema alla <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">comunità di Nextcloud </a>.",
     "Continue to {productName}" : "Continua in {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["L'aggiornamento è stato effettuato correttamente. Reindirizzamento a {productName} in %n secondo.","L'aggiornamento è stato effettuato correttamente. Reindirizzamento a {productName} %n secondi."],
     "Log in" : "Accedi",
     "Logging in …" : "Accesso in corso...",
     "Server side authentication failed!" : "Autenticazione lato server non riuscita!",
@@ -117,6 +128,7 @@
     "Please try again or contact your administrator." : "Prova ancora o contatta il tuo amministratore.",
     "Username or email" : "Nome utente o email",
     "Password" : "Password",
+    "Toggle password visibility" : "Commuta la visibilità delle password",
     "Wrong username or password." : "Nome utente o password errati.",
     "User disabled" : "Disabilitato dall'utente",
     "We have detected multiple invalid login attempts from your IP. Therefore your next login is throttled up to 30 seconds." : "Abbiamo rilevato molti tentativi di autenticazione non riusciti dal tuo indirizzo IP. Di conseguenza, il prossimo tentativo è ritardato di 30 secondi.",
@@ -124,6 +136,7 @@
     "Passwordless authentication is not supported in your browser." : "L'autenticazione senza password non è supportata dal tuo browser. ",
     "Passwordless authentication is only available over a secure connection." : "L'autenticazione senza password è disponibile solo su una connessione sicura.",
     "Reset password" : "Ripristina la password",
+    "A password reset message has been sent to the email address of this account. If you do not receive it, check your spam/junk folders or ask your local administrator for help." : "Abbiamo inviato un messaggio di ripristino della password all'indirizzo di posta di questo account. Se non lo ricevi, controlla le cartelle della posta indesiderata o contatta il tuo amministratore locale.",
     "If it is not there ask your local administrator." : "Se non c'è, chiedi al tuo amministratore locale.",
     "Couldn't send reset email. Please contact your administrator." : "Impossibile inviare l'email di reimpostazione. Contatta il tuo amministratore.",
     "Password can not be changed. Please contact your administrator." : "La password non può essere cambiata. Contatta il tuo amministratore.",
diff --git a/core/l10n/zh_HK.js b/core/l10n/zh_HK.js
index 98951f2fa54..c364f67a5ba 100644
--- a/core/l10n/zh_HK.js
+++ b/core/l10n/zh_HK.js
@@ -1,7 +1,7 @@
 OC.L10N.register(
     "core",
     {
-    "Please select a file." : "請選擇檔案",
+    "Please select a file." : "請選擇檔案。",
     "File is too big" : "檔案太大",
     "The selected file is not an image." : "選擇的檔案不是圖像檔",
     "The selected file cannot be read." : "選擇的檔案無法讀取",
@@ -28,7 +28,7 @@ OC.L10N.register(
     "Your login token is invalid or has expired" : "您的登入權杖無效或已過期",
     "Password reset is disabled" : "密碼重設已停用",
     "Couldn't reset password because the token is invalid" : "重設密碼權杖無效，重設失敗",
-    "Couldn't reset password because the token is expired" : "無法重設密碼，因為權杖過期",
+    "Couldn't reset password because the token is expired" : "權杖已過期，無法重設密碼",
     "%s password reset" : "%s 密碼重設",
     "Password reset" : "密碼重設",
     "Click the following button to reset your password. If you have not requested the password reset, then ignore this email." : "點選下方的按鈕來重設您的密碼。若您沒有要求重設密碼，請不用理會此電子郵件。",
@@ -45,7 +45,7 @@ OC.L10N.register(
     "Repair info:" : "修復資訊：",
     "Repair warning:" : "修復警告：",
     "Repair error:" : "修復錯誤：",
-    "Please use the command line updater because automatic updating is disabled in the config.php." : "由於自動更新功能已在 config.php 檔案中設定停用，請使用命令列更新系統。",
+    "Please use the command line updater because automatic updating is disabled in the config.php." : "由於自動更新功能已在 config.php 檔案中設定停用，請使用命令列（command line）更新系統。",
     "[%d / %d]: Checking table %s" : "[%d / %d]： 檢查資料表 %s",
     "Turned on maintenance mode" : "啟用維護模式",
     "Turned off maintenance mode" : "停用維護模式",
@@ -71,7 +71,7 @@ OC.L10N.register(
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 設定似乎不完整，導致無法正確取得系統環境變數，因為偵測到 getenv(\"PATH\"）回傳資料為空值",
     "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "請查看 {linkstart}安裝文檔↗{linkend}，以獲取PHP配置說明和伺服器的PHP配置，尤其是在使用 php-fpm 時。",
     "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用，這樣可以防止來自網頁端的設定操作，每次需要更改設定時，都需要手動將設定檔暫時改為可讀寫。",
-    "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的數據庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時，這可能會造成問題。",
+    "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的數據庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個操作平行進行時，這可能會造成問題。",
     "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未偵測到 PHP 模組 'fileinfo'。強烈建議啟用這個模組，以取得最好的 MIME 檔案類型偵測支援。",
     "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "交易性檔案上鎖已停用，這可能導致爭用條件問題。在config.php中啟用 “filelocking。enabled” 可以避免這些問題。有關更多信息，請參見{linkstart}文檔↗{linkend}。",
     "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "如果您的安裝路徑不在網域的最上層，並且使用 cron 作為排程器，URL 的生成可能會有問題，為了避免這樣的狀況，請您在 config.php 檔案裡設定 overwrite。cli。url 為您安裝的 webroot 路徑。（建議值：\"{suggestedOverwriteCliURL}\"）",
@@ -135,7 +135,7 @@ OC.L10N.register(
     "Log in" : "登入",
     "Logging in …" : "正在登入…",
     "Server side authentication failed!" : "伺服器端認證失敗！",
-    "Please contact your administrator." : "請聯絡系統管理員",
+    "Please contact your administrator." : "請聯絡系統管理員。",
     "An internal error occurred." : "發生內部錯誤",
     "Please try again or contact your administrator." : "請重試或聯絡系統管理員",
     "Username or email" : "用戶名稱 或 電郵地址",
@@ -249,7 +249,7 @@ OC.L10N.register(
     "So-so password" : "密碼安全性普通",
     "Good password" : "密碼安全性佳",
     "Strong password" : "密碼安全性極佳",
-    "No action available" : "沒有可用的動作",
+    "No action available" : "沒有可用的操作",
     "Error fetching contact actions" : "擷取聯絡人時發生錯誤",
     "Non-existing tag #{tag}" : "不存在的標籤 #{tag}",
     "restricted" : "受限",
@@ -356,7 +356,7 @@ OC.L10N.register(
     "App update required" : "需要更新應用程式",
     "%1$s will be updated to version %2$s" : "%1$s 將會更新至版本 %2$s",
     "The following apps will be updated:" : "將更新以下的 APP：",
-    "These incompatible apps will be disabled:" : "將會停用這些不相容的應用程式",
+    "These incompatible apps will be disabled:" : "以下不兼容的應用程式將被停用：",
     "The theme %s has been disabled." : "主題 %s 已經被停用",
     "Please make sure that the database, the config folder and the data folder have been backed up before proceeding." : "在繼續之前，請備份數據庫、config 資料夾及數據資料夾",
     "Start update" : "開始升級",
@@ -370,7 +370,7 @@ OC.L10N.register(
     "Maintenance mode" : "維護模式",
     "This %s instance is currently in maintenance mode, which may take a while." : "這個 %s 安裝目前處於維護模式，需要一段時間恢復。",
     "This page will refresh itself when the instance is available again." : "安裝恢復可用之後，本頁會自動重新整理",
-    "Contact your system administrator if this message persists or appeared unexpectedly." : "若這個訊息持續出現，請聯絡系統管理員",
+    "Contact your system administrator if this message persists or appeared unexpectedly." : "若這個訊息持續出現，請聯絡系統管理員。",
     "Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "正在檢查是否有可更新的數據庫模式（若數據庫較大，可能需要一段時間）",
     "Checked database schema update" : "已檢查數據庫模式更新",
     "Checking updates of apps" : "正在檢查應用程式更新",
diff --git a/core/l10n/zh_HK.json b/core/l10n/zh_HK.json
index cb21e54775e..7d7d52f5b59 100644
--- a/core/l10n/zh_HK.json
+++ b/core/l10n/zh_HK.json
@@ -1,5 +1,5 @@
 { "translations": {
-    "Please select a file." : "請選擇檔案",
+    "Please select a file." : "請選擇檔案。",
     "File is too big" : "檔案太大",
     "The selected file is not an image." : "選擇的檔案不是圖像檔",
     "The selected file cannot be read." : "選擇的檔案無法讀取",
@@ -26,7 +26,7 @@
     "Your login token is invalid or has expired" : "您的登入權杖無效或已過期",
     "Password reset is disabled" : "密碼重設已停用",
     "Couldn't reset password because the token is invalid" : "重設密碼權杖無效，重設失敗",
-    "Couldn't reset password because the token is expired" : "無法重設密碼，因為權杖過期",
+    "Couldn't reset password because the token is expired" : "權杖已過期，無法重設密碼",
     "%s password reset" : "%s 密碼重設",
     "Password reset" : "密碼重設",
     "Click the following button to reset your password. If you have not requested the password reset, then ignore this email." : "點選下方的按鈕來重設您的密碼。若您沒有要求重設密碼，請不用理會此電子郵件。",
@@ -43,7 +43,7 @@
     "Repair info:" : "修復資訊：",
     "Repair warning:" : "修復警告：",
     "Repair error:" : "修復錯誤：",
-    "Please use the command line updater because automatic updating is disabled in the config.php." : "由於自動更新功能已在 config.php 檔案中設定停用，請使用命令列更新系統。",
+    "Please use the command line updater because automatic updating is disabled in the config.php." : "由於自動更新功能已在 config.php 檔案中設定停用，請使用命令列（command line）更新系統。",
     "[%d / %d]: Checking table %s" : "[%d / %d]： 檢查資料表 %s",
     "Turned on maintenance mode" : "啟用維護模式",
     "Turned off maintenance mode" : "停用維護模式",
@@ -69,7 +69,7 @@
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 設定似乎不完整，導致無法正確取得系統環境變數，因為偵測到 getenv(\"PATH\"）回傳資料為空值",
     "Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "請查看 {linkstart}安裝文檔↗{linkend}，以獲取PHP配置說明和伺服器的PHP配置，尤其是在使用 php-fpm 時。",
     "The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用，這樣可以防止來自網頁端的設定操作，每次需要更改設定時，都需要手動將設定檔暫時改為可讀寫。",
-    "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的數據庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時，這可能會造成問題。",
+    "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的數據庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個操作平行進行時，這可能會造成問題。",
     "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未偵測到 PHP 模組 'fileinfo'。強烈建議啟用這個模組，以取得最好的 MIME 檔案類型偵測支援。",
     "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "交易性檔案上鎖已停用，這可能導致爭用條件問題。在config.php中啟用 “filelocking。enabled” 可以避免這些問題。有關更多信息，請參見{linkstart}文檔↗{linkend}。",
     "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (suggestion: \"{suggestedOverwriteCliURL}\")" : "如果您的安裝路徑不在網域的最上層，並且使用 cron 作為排程器，URL 的生成可能會有問題，為了避免這樣的狀況，請您在 config.php 檔案裡設定 overwrite。cli。url 為您安裝的 webroot 路徑。（建議值：\"{suggestedOverwriteCliURL}\"）",
@@ -133,7 +133,7 @@
     "Log in" : "登入",
     "Logging in …" : "正在登入…",
     "Server side authentication failed!" : "伺服器端認證失敗！",
-    "Please contact your administrator." : "請聯絡系統管理員",
+    "Please contact your administrator." : "請聯絡系統管理員。",
     "An internal error occurred." : "發生內部錯誤",
     "Please try again or contact your administrator." : "請重試或聯絡系統管理員",
     "Username or email" : "用戶名稱 或 電郵地址",
@@ -247,7 +247,7 @@
     "So-so password" : "密碼安全性普通",
     "Good password" : "密碼安全性佳",
     "Strong password" : "密碼安全性極佳",
-    "No action available" : "沒有可用的動作",
+    "No action available" : "沒有可用的操作",
     "Error fetching contact actions" : "擷取聯絡人時發生錯誤",
     "Non-existing tag #{tag}" : "不存在的標籤 #{tag}",
     "restricted" : "受限",
@@ -354,7 +354,7 @@
     "App update required" : "需要更新應用程式",
     "%1$s will be updated to version %2$s" : "%1$s 將會更新至版本 %2$s",
     "The following apps will be updated:" : "將更新以下的 APP：",
-    "These incompatible apps will be disabled:" : "將會停用這些不相容的應用程式",
+    "These incompatible apps will be disabled:" : "以下不兼容的應用程式將被停用：",
     "The theme %s has been disabled." : "主題 %s 已經被停用",
     "Please make sure that the database, the config folder and the data folder have been backed up before proceeding." : "在繼續之前，請備份數據庫、config 資料夾及數據資料夾",
     "Start update" : "開始升級",
@@ -368,7 +368,7 @@
     "Maintenance mode" : "維護模式",
     "This %s instance is currently in maintenance mode, which may take a while." : "這個 %s 安裝目前處於維護模式，需要一段時間恢復。",
     "This page will refresh itself when the instance is available again." : "安裝恢復可用之後，本頁會自動重新整理",
-    "Contact your system administrator if this message persists or appeared unexpectedly." : "若這個訊息持續出現，請聯絡系統管理員",
+    "Contact your system administrator if this message persists or appeared unexpectedly." : "若這個訊息持續出現，請聯絡系統管理員。",
     "Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "正在檢查是否有可更新的數據庫模式（若數據庫較大，可能需要一段時間）",
     "Checked database schema update" : "已檢查數據庫模式更新",
     "Checking updates of apps" : "正在檢查應用程式更新",