Fix(l10n): Update translations from Transifex

Signed-off-by: Nextcloud bot <bot@nextcloud.com>

86 files changed, 0 insertions, 86 deletions

diff --git a/apps/encryption/l10n/ar.js b/apps/encryption/l10n/ar.js
index 280b73629fb..8f073e06d18 100644
--- a/apps/encryption/l10n/ar.js
+++ b/apps/encryption/l10n/ar.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "مفعلة",
     "Disabled" : "معطلة",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "الرجاء تسجيل الدخول إلى واجهة الويب ثم  الانتقال إلى قسم \"الأمان\" security في إعداداتك الشخصية وتحديث كلمة مرور التشفير الخاصة بك بإدخالها في خانة \"كلمة مرور الدخول القديمة\" Old log-in password ثم إدخال كلمة مرور  الدخول الحالية.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "من أجل استخدام وحدة التشفير هذه تحتاج إلى تمكين جانب الخادوم \n\t\t التشفير في إعدادات المسؤول. بمجرد تمكين هذه الوحدة سوف تقوم بتشفير \n\t\t كل ملفاتك بشفافية. يعتمد التشفير على مفتاح 256 AES\n \t\t لن تلمس الوحدة الملفات الموجودة مُسبقاً و ستقوم فقط بتشفير الملفات الجديدة\n\t\t بعد تمكين التشفير من جانب الخادوم، لن يكون مُمكناً \n\t\t تعطيل التشفير مرة أخرى والرجوع إلى حالة عدم التشفير. \n\t\t يرجى قراءة الوثائق لمعرفة جميع العواقب المترتبةقبل أن تقرر\n\t\t لتمكين التشفير من جانب الخادوم.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "مفتاح الاسترداد هو مفتاح تشفير إضافي يُستخدم لتشفير الملفات. يسمح باستعادة ملفات المستخدم إذا نسي المستخدم كلمة المرور الخاصة به."
 },
 "nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;");
diff --git a/apps/encryption/l10n/ar.json b/apps/encryption/l10n/ar.json
index e4b9816ace3..838b01660d4 100644
--- a/apps/encryption/l10n/ar.json
+++ b/apps/encryption/l10n/ar.json
@@ -60,7 +60,6 @@
     "Enabled" : "مفعلة",
     "Disabled" : "معطلة",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "الرجاء تسجيل الدخول إلى واجهة الويب ثم  الانتقال إلى قسم \"الأمان\" security في إعداداتك الشخصية وتحديث كلمة مرور التشفير الخاصة بك بإدخالها في خانة \"كلمة مرور الدخول القديمة\" Old log-in password ثم إدخال كلمة مرور  الدخول الحالية.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "من أجل استخدام وحدة التشفير هذه تحتاج إلى تمكين جانب الخادوم \n\t\t التشفير في إعدادات المسؤول. بمجرد تمكين هذه الوحدة سوف تقوم بتشفير \n\t\t كل ملفاتك بشفافية. يعتمد التشفير على مفتاح 256 AES\n \t\t لن تلمس الوحدة الملفات الموجودة مُسبقاً و ستقوم فقط بتشفير الملفات الجديدة\n\t\t بعد تمكين التشفير من جانب الخادوم، لن يكون مُمكناً \n\t\t تعطيل التشفير مرة أخرى والرجوع إلى حالة عدم التشفير. \n\t\t يرجى قراءة الوثائق لمعرفة جميع العواقب المترتبةقبل أن تقرر\n\t\t لتمكين التشفير من جانب الخادوم.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "مفتاح الاسترداد هو مفتاح تشفير إضافي يُستخدم لتشفير الملفات. يسمح باستعادة ملفات المستخدم إذا نسي المستخدم كلمة المرور الخاصة به."
 },"pluralForm" :"nplurals=6; plural=n==0 ? 0 : n==1 ? 1 : n==2 ? 2 : n%100>=3 && n%100<=10 ? 3 : n%100>=11 && n%100<=99 ? 4 : 5;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/bg.js b/apps/encryption/l10n/bg.js
index 3161b846d02..845bda9a915 100644
--- a/apps/encryption/l10n/bg.js
+++ b/apps/encryption/l10n/bg.js
@@ -60,7 +60,6 @@ OC.L10N.register(
     "Enabled" : "Включено",
     "Disabled" : "Изключено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Моля, влезте в уеб интерфейса, отидете в раздел „Сигурност“ на личните си настройки и актуализирайте паролата си за криптиране, като въведете тази парола в полето „Стара парола за влизане“ и текущата си парола за влизане.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "За да използвате този модул за криптиране, трябва да активирате от страна на сървъра\nкриптирането в администраторските настройки. След като бъде активиран, този модул ще шифрова\nвсичките ви файлове прозрачно. Криптирането се основава на AES 256 ключове.\nМодулът няма да засяга съществуващи файлове, само новите файлове ще бъдат криптирани\nслед активиране на криптиране от страна на сървъра. Също така не е възможно да\nдеактивирайте криптирането отново и се върнете към нешифрована система.\nМоля, прочетете документацията, за да знаете всички последици, преди да решите\nда активирате сървърно криптиране.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ключът за възстановяване е допълнителен ключ за криптиране, който се използва за криптиране на файлове. Той позволява възстановяване на файлове на потребител, ако потребителят си забрави паролата."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/bg.json b/apps/encryption/l10n/bg.json
index d1b7079221e..3b1d1bc99c1 100644
--- a/apps/encryption/l10n/bg.json
+++ b/apps/encryption/l10n/bg.json
@@ -58,7 +58,6 @@
     "Enabled" : "Включено",
     "Disabled" : "Изключено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Моля, влезте в уеб интерфейса, отидете в раздел „Сигурност“ на личните си настройки и актуализирайте паролата си за криптиране, като въведете тази парола в полето „Стара парола за влизане“ и текущата си парола за влизане.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "За да използвате този модул за криптиране, трябва да активирате от страна на сървъра\nкриптирането в администраторските настройки. След като бъде активиран, този модул ще шифрова\nвсичките ви файлове прозрачно. Криптирането се основава на AES 256 ключове.\nМодулът няма да засяга съществуващи файлове, само новите файлове ще бъдат криптирани\nслед активиране на криптиране от страна на сървъра. Също така не е възможно да\nдеактивирайте криптирането отново и се върнете към нешифрована система.\nМоля, прочетете документацията, за да знаете всички последици, преди да решите\nда активирате сървърно криптиране.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ключът за възстановяване е допълнителен ключ за криптиране, който се използва за криптиране на файлове. Той позволява възстановяване на файлове на потребител, ако потребителят си забрави паролата."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/ca.js b/apps/encryption/l10n/ca.js
index 5ae1f6bd946..e5f7f4126a8 100644
--- a/apps/encryption/l10n/ca.js
+++ b/apps/encryption/l10n/ca.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Si activeu aquesta opció, podreu accedir als vostres fitxers encriptats en cas de pèrdua de contrasenya",
     "Enabled" : "Habilitat",
     "Disabled" : "Inhabilitat",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Per fer servir aquest mòdul criptogràfic s’ha de habilitar xifratge en el servidor\n\t\tals paràmetres de l'administrador. Un cop habilitat, aquest mòdul xifrarà\n\t\ttots els vostres fitxers de forma transparent. El xifratge està basada en claus de AES 256.\n\t\tEl mòdul no tocarà fitxers existents, només es xifraràn els nous un cop s'hagi activat\n\t\tel xifratge en el servidor. Tampoc no és possible inhabilitar\n\t\tel xifratge i tornar a un sistema no xifrat.\n\t\tSi us plau llegiu la documentació per saber totes les implicacions abans de decidir\n\t\tactivar el xifratge en el servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La clau de recuperació és una clau de xifratge addicional que s'utilitza per xifrar fitxers. Permet la recuperació dels fitxers d'un usuari si l'usuari oblida de la seva contrasenya."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/ca.json b/apps/encryption/l10n/ca.json
index f10c669108c..03c644368b7 100644
--- a/apps/encryption/l10n/ca.json
+++ b/apps/encryption/l10n/ca.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Si activeu aquesta opció, podreu accedir als vostres fitxers encriptats en cas de pèrdua de contrasenya",
     "Enabled" : "Habilitat",
     "Disabled" : "Inhabilitat",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Per fer servir aquest mòdul criptogràfic s’ha de habilitar xifratge en el servidor\n\t\tals paràmetres de l'administrador. Un cop habilitat, aquest mòdul xifrarà\n\t\ttots els vostres fitxers de forma transparent. El xifratge està basada en claus de AES 256.\n\t\tEl mòdul no tocarà fitxers existents, només es xifraràn els nous un cop s'hagi activat\n\t\tel xifratge en el servidor. Tampoc no és possible inhabilitar\n\t\tel xifratge i tornar a un sistema no xifrat.\n\t\tSi us plau llegiu la documentació per saber totes les implicacions abans de decidir\n\t\tactivar el xifratge en el servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La clau de recuperació és una clau de xifratge addicional que s'utilitza per xifrar fitxers. Permet la recuperació dels fitxers d'un usuari si l'usuari oblida de la seva contrasenya."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/cs.js b/apps/encryption/l10n/cs.js
index a48a0e806f0..0a6ca640e8b 100644
--- a/apps/encryption/l10n/cs.js
+++ b/apps/encryption/l10n/cs.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Povoleno",
     "Disabled" : "Zakázáno",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Přihlaste se do webového rozhraní, jděte do osobních nastavení, sekce „Zabezpečení“ a zaktualizujte své šifrovací heslo zadáním tohoto hesla do kolonky „Původní přihlašovací heslo“ a pak jako nové nastavte to heslo, kterým se nyní přihlašujete do Nexcloud.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pro používání tohoto šifrovacího modulu je třeba zapnout šifrování na straně serveru\n\t\t ve správním nastavení. Jakmile je zapnutý, tento modul transparentně zašifruje\n\t\tvšechny vaše soubory. Šifrování je založeno na AES 256 klíčích.\n\t\tModul se nedotkne existujících souborů, zašifrovány budou pouze nové soubory\n\t\tpo zapnutí šifrování na straně serveru už není možné\n\t\tho zase vypnout a vrátit se k nešifrovanému systému.\n\t\tNež se rozhodnete zapnout šifrování na straně serveru\n\t\tpřečtěte si dokumentaci, abyste se seznámili se známými důsledky.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Záchranný klíč je dodatečný šifrovací klíč použitý pro\nšifrování souborů. S jeho pomocí lze obnovit soubory uživatele při zapomenutí hesla."
 },
 "nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;");
diff --git a/apps/encryption/l10n/cs.json b/apps/encryption/l10n/cs.json
index f2c88bcb6ad..0b1c0a4df4b 100644
--- a/apps/encryption/l10n/cs.json
+++ b/apps/encryption/l10n/cs.json
@@ -59,7 +59,6 @@
     "Enabled" : "Povoleno",
     "Disabled" : "Zakázáno",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Přihlaste se do webového rozhraní, jděte do osobních nastavení, sekce „Zabezpečení“ a zaktualizujte své šifrovací heslo zadáním tohoto hesla do kolonky „Původní přihlašovací heslo“ a pak jako nové nastavte to heslo, kterým se nyní přihlašujete do Nexcloud.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pro používání tohoto šifrovacího modulu je třeba zapnout šifrování na straně serveru\n\t\t ve správním nastavení. Jakmile je zapnutý, tento modul transparentně zašifruje\n\t\tvšechny vaše soubory. Šifrování je založeno na AES 256 klíčích.\n\t\tModul se nedotkne existujících souborů, zašifrovány budou pouze nové soubory\n\t\tpo zapnutí šifrování na straně serveru už není možné\n\t\tho zase vypnout a vrátit se k nešifrovanému systému.\n\t\tNež se rozhodnete zapnout šifrování na straně serveru\n\t\tpřečtěte si dokumentaci, abyste se seznámili se známými důsledky.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Záchranný klíč je dodatečný šifrovací klíč použitý pro\nšifrování souborů. S jeho pomocí lze obnovit soubory uživatele při zapomenutí hesla."
 },"pluralForm" :"nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/da.js b/apps/encryption/l10n/da.js
index ffe62a30d9c..a9c1c8188c2 100644
--- a/apps/encryption/l10n/da.js
+++ b/apps/encryption/l10n/da.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Aktivering af denne valgmulighed tillader dig at generhverve adgang til dine krypterede filer i tilfælde af tab af kodeord",
     "Enabled" : "Aktiveret",
     "Disabled" : "Deaktiveret",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "For at anvende dette krypteringsmodul, skal du aktivere kryptering på server-siden under administrator-indstillinger. Når dette modul er aktieret, vil det kryptere alle dine filer transparent. Krypteringen er baseret på AES 256-nøgler. Modulet rører ikke eksisterende filer, kun nye filer vil blive krypteret, efter at kryptering på server-siden er aktiveret. Det er ikke muligt at aktivere kryptering igen og skifte tilbage til et ukrypteret system. Læs venligst dokumentationen, så du kender konsekvenserne, før du beslutter dig for at slå kryptering til på server-siden.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Gendannelsesnøglen er en ekstra krypteringsnøgle, der bruges til at kryptere filer. Den tillader gendannelse af en brugers filer, hvis brugeren glemmer sin adgangskode."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/da.json b/apps/encryption/l10n/da.json
index 98a5b03237f..f4dc54d66ed 100644
--- a/apps/encryption/l10n/da.json
+++ b/apps/encryption/l10n/da.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Aktivering af denne valgmulighed tillader dig at generhverve adgang til dine krypterede filer i tilfælde af tab af kodeord",
     "Enabled" : "Aktiveret",
     "Disabled" : "Deaktiveret",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "For at anvende dette krypteringsmodul, skal du aktivere kryptering på server-siden under administrator-indstillinger. Når dette modul er aktieret, vil det kryptere alle dine filer transparent. Krypteringen er baseret på AES 256-nøgler. Modulet rører ikke eksisterende filer, kun nye filer vil blive krypteret, efter at kryptering på server-siden er aktiveret. Det er ikke muligt at aktivere kryptering igen og skifte tilbage til et ukrypteret system. Læs venligst dokumentationen, så du kender konsekvenserne, før du beslutter dig for at slå kryptering til på server-siden.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Gendannelsesnøglen er en ekstra krypteringsnøgle, der bruges til at kryptere filer. Den tillader gendannelse af en brugers filer, hvis brugeren glemmer sin adgangskode."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/de.js b/apps/encryption/l10n/de.js
index 5c85ce92340..ffe03dd515f 100644
--- a/apps/encryption/l10n/de.js
+++ b/apps/encryption/l10n/de.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Aktiviert",
     "Disabled" : "Deaktiviert",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Bitte melde dich an der Weboberfläche an, gehe zum Abschnitt \"Sicherheit\" deiner persönlichen Einstellungen und aktualisiere dein Verschlüsselungspasswort, indem du dieses Passwort in das Feld \"Altes Login-Passwort\" sowie dein aktuelles Login-Passwort eingibst.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Zur Verwendung dieses Verschlüsselungsmoduls muss serverseitige \n\t\tVerschlüsselung in den Admin-Einstellungen aktiviert werden.  Nach der\n\t\tAktivierung werden alle Dateien verschlüsselt. Die Verschlüsselung basiert\n\t\tauf AES 256 Schlüsseln. Dieses Modul verschlüsselt nur neue Dateien,\n\t\texistierende Dateien werden nicht geädnert. Es ist nicht möglich die Ver-\n\t\tschlüsselung zu deaktivieren und zum Unverschlüsselten System zurück-\n\t\tzu kehren. Vor der Entscheidung das Verschlüsselungsmodul zu verwenden\n\t\tsollte unbedingt die Dokumentation aufmerksam gelesen werden.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Der Wiederherstellungsschlüssel ist ein zusätzlicher Verschlüsselungsschlüssel, der zum Verschlüsseln von Dateien benutzt wird. Er erlaubt die Wiederherstellung von Benutzerdateien auch dann, wenn der Benutzer sein Passwort vergessen hat."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/de.json b/apps/encryption/l10n/de.json
index 820b27321fc..d4fc02d846e 100644
--- a/apps/encryption/l10n/de.json
+++ b/apps/encryption/l10n/de.json
@@ -59,7 +59,6 @@
     "Enabled" : "Aktiviert",
     "Disabled" : "Deaktiviert",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Bitte melde dich an der Weboberfläche an, gehe zum Abschnitt \"Sicherheit\" deiner persönlichen Einstellungen und aktualisiere dein Verschlüsselungspasswort, indem du dieses Passwort in das Feld \"Altes Login-Passwort\" sowie dein aktuelles Login-Passwort eingibst.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Zur Verwendung dieses Verschlüsselungsmoduls muss serverseitige \n\t\tVerschlüsselung in den Admin-Einstellungen aktiviert werden.  Nach der\n\t\tAktivierung werden alle Dateien verschlüsselt. Die Verschlüsselung basiert\n\t\tauf AES 256 Schlüsseln. Dieses Modul verschlüsselt nur neue Dateien,\n\t\texistierende Dateien werden nicht geädnert. Es ist nicht möglich die Ver-\n\t\tschlüsselung zu deaktivieren und zum Unverschlüsselten System zurück-\n\t\tzu kehren. Vor der Entscheidung das Verschlüsselungsmodul zu verwenden\n\t\tsollte unbedingt die Dokumentation aufmerksam gelesen werden.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Der Wiederherstellungsschlüssel ist ein zusätzlicher Verschlüsselungsschlüssel, der zum Verschlüsseln von Dateien benutzt wird. Er erlaubt die Wiederherstellung von Benutzerdateien auch dann, wenn der Benutzer sein Passwort vergessen hat."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/de_DE.js b/apps/encryption/l10n/de_DE.js
index 461a079bfbc..be6b309b29a 100644
--- a/apps/encryption/l10n/de_DE.js
+++ b/apps/encryption/l10n/de_DE.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Aktiviert",
     "Disabled" : "Deaktiviert",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Bitte melden Sie sich an der Weboberfläche an, gehen Sie zum Abschnitt \"Sicherheit\" Ihrer persönlichen Einstellungen und aktualisieren Sie Ihr Verschlüsselungspasswort, indem Sie dieses Passwort in das Feld \"Altes Login-Passwort\" sowie Ihr aktuelles Login-Passwort eingeben.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Zur Verwendung dieses Verschlüsselungsmoduls muss serverseitige\n\t\tVerschlüsselung in den Administrator-Einstellungen aktiviert werden. Nach der\n\t\tAktivierung werden alle Dateien verschlüsselt. Die Verschlüsselung basiert\n\t\tauf AES 256 Schlüsseln. Dieses Modul verschlüsselt nur neue Dateien,\n\t\texistierende Dateien werden nicht geändert. Es ist nicht möglich, die Ver-\n\t\tschlüsselung zu deaktivieren und zum unverschlüsselten System zurück-\n\t\tzukehren. Vor der Entscheidung, das Verschlüsselungsmodul zu verwenden,\n\t\tsollte unbedingt die Dokumentation aufmerksam gelesen werden.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Der Wiederherstellungsschlüssel ist ein zusätzlicher Verschlüsselungsschlüssel, der zum Verschlüsseln von Dateien benutzt wird. Er erlaubt die Wiederherstellung von Benutzerdateien auch dann, wenn der Benutzer sein Passwort vergessen hat."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/de_DE.json b/apps/encryption/l10n/de_DE.json
index 36494cc1026..2e402c37d1f 100644
--- a/apps/encryption/l10n/de_DE.json
+++ b/apps/encryption/l10n/de_DE.json
@@ -60,7 +60,6 @@
     "Enabled" : "Aktiviert",
     "Disabled" : "Deaktiviert",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Bitte melden Sie sich an der Weboberfläche an, gehen Sie zum Abschnitt \"Sicherheit\" Ihrer persönlichen Einstellungen und aktualisieren Sie Ihr Verschlüsselungspasswort, indem Sie dieses Passwort in das Feld \"Altes Login-Passwort\" sowie Ihr aktuelles Login-Passwort eingeben.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Zur Verwendung dieses Verschlüsselungsmoduls muss serverseitige\n\t\tVerschlüsselung in den Administrator-Einstellungen aktiviert werden. Nach der\n\t\tAktivierung werden alle Dateien verschlüsselt. Die Verschlüsselung basiert\n\t\tauf AES 256 Schlüsseln. Dieses Modul verschlüsselt nur neue Dateien,\n\t\texistierende Dateien werden nicht geändert. Es ist nicht möglich, die Ver-\n\t\tschlüsselung zu deaktivieren und zum unverschlüsselten System zurück-\n\t\tzukehren. Vor der Entscheidung, das Verschlüsselungsmodul zu verwenden,\n\t\tsollte unbedingt die Dokumentation aufmerksam gelesen werden.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Der Wiederherstellungsschlüssel ist ein zusätzlicher Verschlüsselungsschlüssel, der zum Verschlüsseln von Dateien benutzt wird. Er erlaubt die Wiederherstellung von Benutzerdateien auch dann, wenn der Benutzer sein Passwort vergessen hat."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/el.js b/apps/encryption/l10n/el.js
index 36cb896cd3d..307d4af7bf1 100644
--- a/apps/encryption/l10n/el.js
+++ b/apps/encryption/l10n/el.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Η ενεργοποίηση αυτής της επιλογής θα σας επιτρέψει να επανακτήσετε πρόσβαση στα κρυπτογραφημένα σας αρχεία σε περίπτωση απώλειας του κωδικού σας",
     "Enabled" : "Ενεργοποιημένο",
     "Disabled" : "Απενεργοποιημένο",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Για την χρήση του πρόσθετου κρυπτογράφησης πρέπει να το ενεργοποιήσετε από τον διακομιστή \n\t\tτην κρυπτογράφηση στις ρυθμίσεις διαχείρισης. Μόλις ενεργοποιηθεί το ρπόσθετο θα κρυπτογραφήσει\n\t\tόλα τα αρχεία σας χωρίς εξέρεση. Η κρυπρογράφηση βασίζεται σε κλειδιά AES 256.\n\t\tTο πρόσθετο θα κρυπτογραφεί μόνο νέα αρχεία\n\t\tμετά την ενεγοποίηση απο τον διακομιστή. Επίσης δεν είναι δυνατό να\n\t\tαπενεργοποιηθεί η κρυπτογράφηση και να λειτουργήσει ξανά με το προηγούμενο σύστημα.\n\t\tΠαρακαλώ διαβάστε την τεκμηρίωση πρίν αποφασίσετε\n\t\tτην ενεργοποίηση κρυπτογράφησης του διακομιστή σας.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Το κλειδί ανάκτησης είναι ένα επιπλέον κλειδί κρυπτογράφησης που χρησιμοποιείται για να κρυπτογραφήσει αρχεία. Επιτρέπει την ανάκτηση των αρχείων ενός χρήστη αν αυτός/αυτή ξεχάσει τον κωδικό πρόσβασης."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/el.json b/apps/encryption/l10n/el.json
index 62fdaf9a336..d78bce1bd41 100644
--- a/apps/encryption/l10n/el.json
+++ b/apps/encryption/l10n/el.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Η ενεργοποίηση αυτής της επιλογής θα σας επιτρέψει να επανακτήσετε πρόσβαση στα κρυπτογραφημένα σας αρχεία σε περίπτωση απώλειας του κωδικού σας",
     "Enabled" : "Ενεργοποιημένο",
     "Disabled" : "Απενεργοποιημένο",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Για την χρήση του πρόσθετου κρυπτογράφησης πρέπει να το ενεργοποιήσετε από τον διακομιστή \n\t\tτην κρυπτογράφηση στις ρυθμίσεις διαχείρισης. Μόλις ενεργοποιηθεί το ρπόσθετο θα κρυπτογραφήσει\n\t\tόλα τα αρχεία σας χωρίς εξέρεση. Η κρυπρογράφηση βασίζεται σε κλειδιά AES 256.\n\t\tTο πρόσθετο θα κρυπτογραφεί μόνο νέα αρχεία\n\t\tμετά την ενεγοποίηση απο τον διακομιστή. Επίσης δεν είναι δυνατό να\n\t\tαπενεργοποιηθεί η κρυπτογράφηση και να λειτουργήσει ξανά με το προηγούμενο σύστημα.\n\t\tΠαρακαλώ διαβάστε την τεκμηρίωση πρίν αποφασίσετε\n\t\tτην ενεργοποίηση κρυπτογράφησης του διακομιστή σας.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Το κλειδί ανάκτησης είναι ένα επιπλέον κλειδί κρυπτογράφησης που χρησιμοποιείται για να κρυπτογραφήσει αρχεία. Επιτρέπει την ανάκτηση των αρχείων ενός χρήστη αν αυτός/αυτή ξεχάσει τον κωδικό πρόσβασης."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/en_GB.js b/apps/encryption/l10n/en_GB.js
index 23d4044d322..b22d09733bc 100644
--- a/apps/encryption/l10n/en_GB.js
+++ b/apps/encryption/l10n/en_GB.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Enabled",
     "Disabled" : "Disabled",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old login password\" field and your current login password.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/en_GB.json b/apps/encryption/l10n/en_GB.json
index 3fdb2552478..aaf1ac3b1d2 100644
--- a/apps/encryption/l10n/en_GB.json
+++ b/apps/encryption/l10n/en_GB.json
@@ -60,7 +60,6 @@
     "Enabled" : "Enabled",
     "Disabled" : "Disabled",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old login password\" field and your current login password.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/eo.js b/apps/encryption/l10n/eo.js
index 023cf2217ce..7ec2955f2f6 100644
--- a/apps/encryption/l10n/eo.js
+++ b/apps/encryption/l10n/eo.js
@@ -53,7 +53,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ŝalti tiun opcion ebligas al vi rehavi aliron al viaj ĉifritaj dosierojn okaze de pasvorta perdo.",
     "Enabled" : "Ŝaltita",
     "Disabled" : "Malŝaltita",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Por uzi tiun ĉifran modulon, vi bezonas ŝalti ĉeservilan ĉifradon en la administraj agordoj. Tiu modulo ĉifros ĉiujn viajn dosierojn netrudiĝeme. La ĉifrado baziĝas sur AES-ŝlosiloj de 256 bitoj.\nLa modulo ne ĉifros ekzistantajn dosierojn, nur la venontajn, post kiam la ĉeservila ĉifrado estis ŝaltita. Ankaŭ ne eblas malŝalti la ĉifradon kaj reiri al neĉifrita sistemo.\nBv. legi la dokumentaron por scii ĉiujn konsekvencojn, antaŭ ol decidi, ĉu vi uzos ĉeservilan ĉifradon.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La restaŭroŝlosilo estas kroma ĉifroŝlosilo, kiu uziĝas por ĉifri dosierojn. Ĝi ebligas restaŭron el dosieroj de uzanto, se la uzanto forgesas sian pasvorton."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/eo.json b/apps/encryption/l10n/eo.json
index 64362a15ab3..7b6810c84be 100644
--- a/apps/encryption/l10n/eo.json
+++ b/apps/encryption/l10n/eo.json
@@ -51,7 +51,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ŝalti tiun opcion ebligas al vi rehavi aliron al viaj ĉifritaj dosierojn okaze de pasvorta perdo.",
     "Enabled" : "Ŝaltita",
     "Disabled" : "Malŝaltita",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Por uzi tiun ĉifran modulon, vi bezonas ŝalti ĉeservilan ĉifradon en la administraj agordoj. Tiu modulo ĉifros ĉiujn viajn dosierojn netrudiĝeme. La ĉifrado baziĝas sur AES-ŝlosiloj de 256 bitoj.\nLa modulo ne ĉifros ekzistantajn dosierojn, nur la venontajn, post kiam la ĉeservila ĉifrado estis ŝaltita. Ankaŭ ne eblas malŝalti la ĉifradon kaj reiri al neĉifrita sistemo.\nBv. legi la dokumentaron por scii ĉiujn konsekvencojn, antaŭ ol decidi, ĉu vi uzos ĉeservilan ĉifradon.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La restaŭroŝlosilo estas kroma ĉifroŝlosilo, kiu uziĝas por ĉifri dosierojn. Ĝi ebligas restaŭron el dosieroj de uzanto, se la uzanto forgesas sian pasvorton."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/es.js b/apps/encryption/l10n/es.js
index 9bd35a331cb..39406d971b3 100644
--- a/apps/encryption/l10n/es.js
+++ b/apps/encryption/l10n/es.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Habilitado",
     "Disabled" : "Deshabilitado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Por favor ingrese en la interfaz web, vaya a la sección \"Seguridad\" de sus ajustes personales y actualice su contraseña de cifrado ingresando esta contraseña en el campo \"Contraseña de inicio de sesión antigua\" y su contraseña actual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado necesitas activar\n\t\tel cifrado en el lado del servidor en la configuración de administrador. Una vez activado este módulo cifrará\n\t\ttodos tus archivos de forma transparente. El cifrado se basa en claves AES 256.\n\t\tEl módulo no tocará los archivos existentes, solo los archivos nuevos se cifrarán\n\t\tdespués de que se active el cifrado en el lado del servidor. Tampoco es posible\n\t\tdesactivar el cifrado y volver a un sistema sin cifrar.\n\t\tPor favor, lee la documentación para conocer todas las implicaciones antes de decidir\n\t\tactivar el cifrado en el lado del servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La clave de recuperación es una clave de cifrado extra que se usa para cifrar archivos. Permite la recuperación de los archivos de un usuario si él o ella olvida su contraseña."
 },
 "nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;");
diff --git a/apps/encryption/l10n/es.json b/apps/encryption/l10n/es.json
index 592771e4601..cb38639afe6 100644
--- a/apps/encryption/l10n/es.json
+++ b/apps/encryption/l10n/es.json
@@ -59,7 +59,6 @@
     "Enabled" : "Habilitado",
     "Disabled" : "Deshabilitado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Por favor ingrese en la interfaz web, vaya a la sección \"Seguridad\" de sus ajustes personales y actualice su contraseña de cifrado ingresando esta contraseña en el campo \"Contraseña de inicio de sesión antigua\" y su contraseña actual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado necesitas activar\n\t\tel cifrado en el lado del servidor en la configuración de administrador. Una vez activado este módulo cifrará\n\t\ttodos tus archivos de forma transparente. El cifrado se basa en claves AES 256.\n\t\tEl módulo no tocará los archivos existentes, solo los archivos nuevos se cifrarán\n\t\tdespués de que se active el cifrado en el lado del servidor. Tampoco es posible\n\t\tdesactivar el cifrado y volver a un sistema sin cifrar.\n\t\tPor favor, lee la documentación para conocer todas las implicaciones antes de decidir\n\t\tactivar el cifrado en el lado del servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La clave de recuperación es una clave de cifrado extra que se usa para cifrar archivos. Permite la recuperación de los archivos de un usuario si él o ella olvida su contraseña."
 },"pluralForm" :"nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/es_EC.js b/apps/encryption/l10n/es_EC.js
index cd4758100f3..6090cea76fb 100644
--- a/apps/encryption/l10n/es_EC.js
+++ b/apps/encryption/l10n/es_EC.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Habilitado",
     "Disabled" : "Deshabilitado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Por favor, inicie sesión en la interfaz web, vaya a la sección \"Seguridad\" de su configuración personal y actualice su contraseña de cifrado ingresando esta contraseña en el campo \"Contraseña de inicio de sesión anterior\" y su contraseña de inicio de sesión actual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para poder utilizar este módulo de cifrado, debe habilitar \n      el cifrado en el servidor en la configuración del administrador. \n      Una vez habilitado, este módulo cifrará \n      todos sus archivos de forma transparente. El cifrado se basa en claves AES de 256 bits.\n      El módulo no afectará a los archivos existentes, solo los nuevos archivos se cifrarán después \n      de habilitar el cifrado en el servidor. Tampoco es posible desactivar el cifrado y volver a un sistema sin cifrar.\n      Por favor, lea la documentación para conocer todas las implicaciones antes de decidir \n      habilitar el cifrado en el servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La llave de recuperación es una llave de encripción que se usa para encriptar archivos. Permite la recuperación de los archivos del usuario si este olvida su contraseña. "
 },
 "nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;");
diff --git a/apps/encryption/l10n/es_EC.json b/apps/encryption/l10n/es_EC.json
index d2650047389..4f3a0fc26ef 100644
--- a/apps/encryption/l10n/es_EC.json
+++ b/apps/encryption/l10n/es_EC.json
@@ -59,7 +59,6 @@
     "Enabled" : "Habilitado",
     "Disabled" : "Deshabilitado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Por favor, inicie sesión en la interfaz web, vaya a la sección \"Seguridad\" de su configuración personal y actualice su contraseña de cifrado ingresando esta contraseña en el campo \"Contraseña de inicio de sesión anterior\" y su contraseña de inicio de sesión actual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para poder utilizar este módulo de cifrado, debe habilitar \n      el cifrado en el servidor en la configuración del administrador. \n      Una vez habilitado, este módulo cifrará \n      todos sus archivos de forma transparente. El cifrado se basa en claves AES de 256 bits.\n      El módulo no afectará a los archivos existentes, solo los nuevos archivos se cifrarán después \n      de habilitar el cifrado en el servidor. Tampoco es posible desactivar el cifrado y volver a un sistema sin cifrar.\n      Por favor, lea la documentación para conocer todas las implicaciones antes de decidir \n      habilitar el cifrado en el servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La llave de recuperación es una llave de encripción que se usa para encriptar archivos. Permite la recuperación de los archivos del usuario si este olvida su contraseña. "
 },"pluralForm" :"nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/es_MX.js b/apps/encryption/l10n/es_MX.js
index ca88746e1c1..49a5fcc318d 100644
--- a/apps/encryption/l10n/es_MX.js
+++ b/apps/encryption/l10n/es_MX.js
@@ -54,7 +54,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Habilitar esta opción te permitirá volver a tener acceso a tus archivos encriptados en caso de que pierdas la contraseña",
     "Enabled" : "Habilitado",
     "Disabled" : "Deshabilitado",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para poder usar este módulo de encripción necesitas habilitar la \n\t\tencripción del lado del servidor en las configuraciónes de administración. Una vez habilitado este modulo encriptará\n\t\ttodos tus archivos de forma transparente. La encripción se basa en llaves AES de 256.\n\t\tEl módulo no tocará archivos existentes, solo los nuevos archivos serán encriptados\n\t\tdespues de que la encripción del lado del servidor sea habilitada. Tampoco es posible \n\t\tdeshabilitar la encripción de nuevo y volver a un sistema no encriptado. \n\t\tPor favor lee la documentación para conocer todas las implicaciones antes de que\n\t\tdecidas habilitar la encripción del lado del servidor. ",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La llave de recuperación es una llave de encripción que se usa para encriptar archivos. Permite la recuperación de los archivos del usuario si este olvida su contraseña. "
 },
 "nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;");
diff --git a/apps/encryption/l10n/es_MX.json b/apps/encryption/l10n/es_MX.json
index 1b2fa044fa0..e32332c784c 100644
--- a/apps/encryption/l10n/es_MX.json
+++ b/apps/encryption/l10n/es_MX.json
@@ -52,7 +52,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Habilitar esta opción te permitirá volver a tener acceso a tus archivos encriptados en caso de que pierdas la contraseña",
     "Enabled" : "Habilitado",
     "Disabled" : "Deshabilitado",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para poder usar este módulo de encripción necesitas habilitar la \n\t\tencripción del lado del servidor en las configuraciónes de administración. Una vez habilitado este modulo encriptará\n\t\ttodos tus archivos de forma transparente. La encripción se basa en llaves AES de 256.\n\t\tEl módulo no tocará archivos existentes, solo los nuevos archivos serán encriptados\n\t\tdespues de que la encripción del lado del servidor sea habilitada. Tampoco es posible \n\t\tdeshabilitar la encripción de nuevo y volver a un sistema no encriptado. \n\t\tPor favor lee la documentación para conocer todas las implicaciones antes de que\n\t\tdecidas habilitar la encripción del lado del servidor. ",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La llave de recuperación es una llave de encripción que se usa para encriptar archivos. Permite la recuperación de los archivos del usuario si este olvida su contraseña. "
 },"pluralForm" :"nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/eu.js b/apps/encryption/l10n/eu.js
index e226f9d6de7..ebee386de69 100644
--- a/apps/encryption/l10n/eu.js
+++ b/apps/encryption/l10n/eu.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Gaitua",
     "Disabled" : "Ez-gaitua",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Hasi saioa web-interfazean, joan zure ezarpen pertsonaletako \"Segurtasuna\" atalera eta eguneratu zure zifratze pasahitza pasahitz hau \"Saio-hasteko pasahitz zaharra\" eremuan eta zure uneko saio-hasierako pasahitza sartuz.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Zifratze modulu hau erabili ahal izateko zerbitzari mailako zifratzea gaitu behar duzu administratzailearen ezarpenetan.\n\nBehin aktibatuta modulu honek zure fitxategi guztiak modu gardenean zifratuko ditu. Zifratzea AES 256 gakoetan oinarritzen da.\n\nModuluak ez ditu aurretik dauden fitxategiak ukituko, soilik fitxategi berriak zifratuko dira zerbitzari mailako zifratzea ezari eta gero. \n\nEzin da zifratzea desgaitu eta zifratu gabeko sistema batera itzuli.\n\nIrakurri dokumentazioa zerbitzari mailako zifratzea hautatu aurretik honek zer dakarren jakiteko.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Berreskuratze gakoa fitxategiak zifratzeko gako gehigarri bat da. Erabiltzailearen fitxategiak berreskuratzea baimentzen du bere pasahitza galduz gero."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/eu.json b/apps/encryption/l10n/eu.json
index 0acecbc4667..2b8be5843ce 100644
--- a/apps/encryption/l10n/eu.json
+++ b/apps/encryption/l10n/eu.json
@@ -59,7 +59,6 @@
     "Enabled" : "Gaitua",
     "Disabled" : "Ez-gaitua",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Hasi saioa web-interfazean, joan zure ezarpen pertsonaletako \"Segurtasuna\" atalera eta eguneratu zure zifratze pasahitza pasahitz hau \"Saio-hasteko pasahitz zaharra\" eremuan eta zure uneko saio-hasierako pasahitza sartuz.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Zifratze modulu hau erabili ahal izateko zerbitzari mailako zifratzea gaitu behar duzu administratzailearen ezarpenetan.\n\nBehin aktibatuta modulu honek zure fitxategi guztiak modu gardenean zifratuko ditu. Zifratzea AES 256 gakoetan oinarritzen da.\n\nModuluak ez ditu aurretik dauden fitxategiak ukituko, soilik fitxategi berriak zifratuko dira zerbitzari mailako zifratzea ezari eta gero. \n\nEzin da zifratzea desgaitu eta zifratu gabeko sistema batera itzuli.\n\nIrakurri dokumentazioa zerbitzari mailako zifratzea hautatu aurretik honek zer dakarren jakiteko.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Berreskuratze gakoa fitxategiak zifratzeko gako gehigarri bat da. Erabiltzailearen fitxategiak berreskuratzea baimentzen du bere pasahitza galduz gero."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/fa.js b/apps/encryption/l10n/fa.js
index a203afb2a0a..0bafbd3b333 100644
--- a/apps/encryption/l10n/fa.js
+++ b/apps/encryption/l10n/fa.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "فعال شده",
     "Disabled" : "غیرفعال شده",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "برای استفاده از این ماژول رمزگذاری باید سمت سرور را فعال کنید پس از فعال کردن ماژول رمزگذاری در تنظیمات مدیر، رمزگذاری می شود همه پرونده های شما با شفافیت رمزگذاری بر اساس کلید AES 256 است. ماژول پرونده های موجود را لمس نمی کند، فقط پرونده های جدید رمزگذاری می شوند پس از فعال کردن رمزگذاری سمت سرور ممکن نیست رمزنگاری را مجدد غیرفعال کنید و به یک سیستم رمز نشده بازگردید. قبل از انجام عملیات و فعال کردن رمزگذاری سمت سرور توضیحات را بخوانید.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "کلید بازیابی یک کلید رمزگذاری اضافی است که برای رمزگذاری پرونده ها استفاده می شود. اگر کاربر رمزعبور خود را فراموش کند ، امکان بازیابی پرونده های کاربر را فراهم می کند."
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/apps/encryption/l10n/fa.json b/apps/encryption/l10n/fa.json
index a71db6f23c0..866208c7543 100644
--- a/apps/encryption/l10n/fa.json
+++ b/apps/encryption/l10n/fa.json
@@ -59,7 +59,6 @@
     "Enabled" : "فعال شده",
     "Disabled" : "غیرفعال شده",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "برای استفاده از این ماژول رمزگذاری باید سمت سرور را فعال کنید پس از فعال کردن ماژول رمزگذاری در تنظیمات مدیر، رمزگذاری می شود همه پرونده های شما با شفافیت رمزگذاری بر اساس کلید AES 256 است. ماژول پرونده های موجود را لمس نمی کند، فقط پرونده های جدید رمزگذاری می شوند پس از فعال کردن رمزگذاری سمت سرور ممکن نیست رمزنگاری را مجدد غیرفعال کنید و به یک سیستم رمز نشده بازگردید. قبل از انجام عملیات و فعال کردن رمزگذاری سمت سرور توضیحات را بخوانید.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "کلید بازیابی یک کلید رمزگذاری اضافی است که برای رمزگذاری پرونده ها استفاده می شود. اگر کاربر رمزعبور خود را فراموش کند ، امکان بازیابی پرونده های کاربر را فراهم می کند."
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/fr.js b/apps/encryption/l10n/fr.js
index 95b7f5dae09..8ebb3474c4b 100644
--- a/apps/encryption/l10n/fr.js
+++ b/apps/encryption/l10n/fr.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Activé",
     "Disabled" : "Désactivé",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Connectez-vous depuis l'interface web, allez dans la section \"sécurité\" de vos paramètres personnels et mettez à jour votre mot de passe de chiffrement en entrant ce mot de passe dans le champ \"Ancien mot de passe de connexion\" et dans votre mot de passe de connexion actuel.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pour utiliser ce module de chiffrement, vous devez activer le chiffrement  côté serveur dans les paramètres d'administration. Une fois activé, ce module chiffrera tous vos fichiers de manière transparente. Le chiffrement est basé sur des clés AES 256 bits.\nLe module ne touchera pas les fichiers existants, seuls les nouveaux fichiers seront chiffrés. Une fois le chiffrement côté serveur activé, il n'est pas possible de désactiver le chiffrement et de revenir à un système non chiffré.\n\t\tVeuillez lire la documentation pour connaître toutes les implications avant de vous décider à activer le chiffrement côté serveur.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La clé de récupération est une clé supplémentaire utilisée pour chiffrer les fichiers. Elle permet de récupérer les fichiers des utilisateurs s’ils oublient leur mot de passe."
 },
 "nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;");
diff --git a/apps/encryption/l10n/fr.json b/apps/encryption/l10n/fr.json
index f7e6ae1a52f..81f3a807458 100644
--- a/apps/encryption/l10n/fr.json
+++ b/apps/encryption/l10n/fr.json
@@ -60,7 +60,6 @@
     "Enabled" : "Activé",
     "Disabled" : "Désactivé",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Connectez-vous depuis l'interface web, allez dans la section \"sécurité\" de vos paramètres personnels et mettez à jour votre mot de passe de chiffrement en entrant ce mot de passe dans le champ \"Ancien mot de passe de connexion\" et dans votre mot de passe de connexion actuel.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pour utiliser ce module de chiffrement, vous devez activer le chiffrement  côté serveur dans les paramètres d'administration. Une fois activé, ce module chiffrera tous vos fichiers de manière transparente. Le chiffrement est basé sur des clés AES 256 bits.\nLe module ne touchera pas les fichiers existants, seuls les nouveaux fichiers seront chiffrés. Une fois le chiffrement côté serveur activé, il n'est pas possible de désactiver le chiffrement et de revenir à un système non chiffré.\n\t\tVeuillez lire la documentation pour connaître toutes les implications avant de vous décider à activer le chiffrement côté serveur.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La clé de récupération est une clé supplémentaire utilisée pour chiffrer les fichiers. Elle permet de récupérer les fichiers des utilisateurs s’ils oublient leur mot de passe."
 },"pluralForm" :"nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/gl.js b/apps/encryption/l10n/gl.js
index 337124baa02..ee25a992278 100644
--- a/apps/encryption/l10n/gl.js
+++ b/apps/encryption/l10n/gl.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Activado",
     "Disabled" : "Desactivado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Acceda na interface web, vaia á sección «Seguranza» dos seus axustes persoais e actualice o seu contrasinal de cifrado introducindo este contrasinal no campo «Contrasinal antigo de acceso» e o seu contrasinal de acceso actual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado é preciso activar o cifrado no lado\n\t\tdo servidor nos axustes de administración. Una vez activado este módulo cifrará\n\t\ttodos os seus ficheiros de xeito transparente. O cifrado basease en chave AES 256.\n\t\tO módulo non tocará os ficheiros existentes, só se cifran os ficheiros novos\n\t\tapós que se active o cifrado no lado do servidor. Tampouco é posíbel\n\t\tdesactivar o cifrado e volver a un sistema sen cifrar.\n\t\tLea a documentación para coñecer todas as implicacións antes de decidir\n\t\tactivar o cifrado no lado do servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A chave de recuperación é unha chave de cifrado adicional que se utiliza para cifrar ficheiros. Permite a recuperación de ficheiros dun usuario se o usuario esquece o seu contrasinal."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/gl.json b/apps/encryption/l10n/gl.json
index 45bdaa736dd..9279410ec5d 100644
--- a/apps/encryption/l10n/gl.json
+++ b/apps/encryption/l10n/gl.json
@@ -59,7 +59,6 @@
     "Enabled" : "Activado",
     "Disabled" : "Desactivado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Acceda na interface web, vaia á sección «Seguranza» dos seus axustes persoais e actualice o seu contrasinal de cifrado introducindo este contrasinal no campo «Contrasinal antigo de acceso» e o seu contrasinal de acceso actual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado é preciso activar o cifrado no lado\n\t\tdo servidor nos axustes de administración. Una vez activado este módulo cifrará\n\t\ttodos os seus ficheiros de xeito transparente. O cifrado basease en chave AES 256.\n\t\tO módulo non tocará os ficheiros existentes, só se cifran os ficheiros novos\n\t\tapós que se active o cifrado no lado do servidor. Tampouco é posíbel\n\t\tdesactivar o cifrado e volver a un sistema sen cifrar.\n\t\tLea a documentación para coñecer todas as implicacións antes de decidir\n\t\tactivar o cifrado no lado do servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A chave de recuperación é unha chave de cifrado adicional que se utiliza para cifrar ficheiros. Permite a recuperación de ficheiros dun usuario se o usuario esquece o seu contrasinal."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/he.js b/apps/encryption/l10n/he.js
index c744d059187..768d8d2e85b 100644
--- a/apps/encryption/l10n/he.js
+++ b/apps/encryption/l10n/he.js
@@ -53,7 +53,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "הפעלת אפשרות זו תאפשר לך לקבל מחדש גישה לקבצים המוצפנים שלך במקרה שסיסמא נשכחת",
     "Enabled" : "מופעל",
     "Disabled" : "מנוטרל",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "כדי להשתמש במודול הצפנה זה עליך להפעיל הצפנה מצד השרת בהגדרות\n\t\tהניהול. לאחר ההפעלה יצפין מודול זה את כל הקבצים שלך באופן\n\t\tשקוף לחלוטין. ההצפנה מבוססת על מפתחות AES 256.\n\t\tהמודול לא ישפיע על קבצים קיימים, רק קבצים חדשים יוצפנו לאחר\n\t\tהפעלת ההצפנה מצד השרת. כמו כן, לא ניתן להשבית את ההצפנה\n\t\tבחזרה ולשוב למערכת בלתי מוצפנת.\n\t\tנא לקרוא את התיעוד כדי להבין את כל ההשלכות בטרם קבלת ההחלטה\n\t\tלהפעיל הצפנה מצד השרת.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "מפתח השחזור הנו מפתח הצפנה נוסף לשימוש לצורך הצפנת הקבצים. הוא מאפשר את שחזור קבצי המשתמש אם המשתמש שוכח את הסיסמא שלו."
 },
 "nplurals=3; plural=(n == 1 && n % 1 == 0) ? 0 : (n == 2 && n % 1 == 0) ? 1: 2;");
diff --git a/apps/encryption/l10n/he.json b/apps/encryption/l10n/he.json
index 14a205f36c3..26272a5f0ea 100644
--- a/apps/encryption/l10n/he.json
+++ b/apps/encryption/l10n/he.json
@@ -51,7 +51,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "הפעלת אפשרות זו תאפשר לך לקבל מחדש גישה לקבצים המוצפנים שלך במקרה שסיסמא נשכחת",
     "Enabled" : "מופעל",
     "Disabled" : "מנוטרל",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "כדי להשתמש במודול הצפנה זה עליך להפעיל הצפנה מצד השרת בהגדרות\n\t\tהניהול. לאחר ההפעלה יצפין מודול זה את כל הקבצים שלך באופן\n\t\tשקוף לחלוטין. ההצפנה מבוססת על מפתחות AES 256.\n\t\tהמודול לא ישפיע על קבצים קיימים, רק קבצים חדשים יוצפנו לאחר\n\t\tהפעלת ההצפנה מצד השרת. כמו כן, לא ניתן להשבית את ההצפנה\n\t\tבחזרה ולשוב למערכת בלתי מוצפנת.\n\t\tנא לקרוא את התיעוד כדי להבין את כל ההשלכות בטרם קבלת ההחלטה\n\t\tלהפעיל הצפנה מצד השרת.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "מפתח השחזור הנו מפתח הצפנה נוסף לשימוש לצורך הצפנת הקבצים. הוא מאפשר את שחזור קבצי המשתמש אם המשתמש שוכח את הסיסמא שלו."
 },"pluralForm" :"nplurals=3; plural=(n == 1 && n % 1 == 0) ? 0 : (n == 2 && n % 1 == 0) ? 1: 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/hr.js b/apps/encryption/l10n/hr.js
index e6156dd46be..65fb4f81974 100644
--- a/apps/encryption/l10n/hr.js
+++ b/apps/encryption/l10n/hr.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "U slučaju gubitka zaporke, aktiviranje ove mogućnosti ponovno će vam pribaviti pristup vašim šifriranim datotekama",
     "Enabled" : "Omogućeno",
     "Disabled" : "Onemogućeno",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Kako biste se koristili ovim modulom za šifriranje, morate omogućiti šifriranje\n\t\tna poslužitelju u postavkama administratora. Kada je omogućen, ovaj će modul transparentno šifrirati\n\t\tsve vaše datoteke. Šifriranje se temelji na AES 256 ključevima.\n\t\tModul neće dirati postojeće datoteke i šifrirati će samo\n\t\tnove nakon omogućavanja šifriranja na poslužitelju. Također nije moguće ponovno\n\t\tonemogućiti šifriranje i prebaciti se na nešifrirani sustav.\n\t\tPročitajte dokumentaciju kako biste znali sve implikacije ovakvog\n\t\tšifriranja prije nego što odlučite omogućiti šifriranje na poslužitelju.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ključ za oporavak dodatni je ključ za šifriranje koji se upotrebljava za šifriranje datoteka. Omogućuje oporavak datoteka kada korisnik zaboravi svoju zaporku."
 },
 "nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;");
diff --git a/apps/encryption/l10n/hr.json b/apps/encryption/l10n/hr.json
index 3e1ebe24100..4481bd24092 100644
--- a/apps/encryption/l10n/hr.json
+++ b/apps/encryption/l10n/hr.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "U slučaju gubitka zaporke, aktiviranje ove mogućnosti ponovno će vam pribaviti pristup vašim šifriranim datotekama",
     "Enabled" : "Omogućeno",
     "Disabled" : "Onemogućeno",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Kako biste se koristili ovim modulom za šifriranje, morate omogućiti šifriranje\n\t\tna poslužitelju u postavkama administratora. Kada je omogućen, ovaj će modul transparentno šifrirati\n\t\tsve vaše datoteke. Šifriranje se temelji na AES 256 ključevima.\n\t\tModul neće dirati postojeće datoteke i šifrirati će samo\n\t\tnove nakon omogućavanja šifriranja na poslužitelju. Također nije moguće ponovno\n\t\tonemogućiti šifriranje i prebaciti se na nešifrirani sustav.\n\t\tPročitajte dokumentaciju kako biste znali sve implikacije ovakvog\n\t\tšifriranja prije nego što odlučite omogućiti šifriranje na poslužitelju.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ključ za oporavak dodatni je ključ za šifriranje koji se upotrebljava za šifriranje datoteka. Omogućuje oporavak datoteka kada korisnik zaboravi svoju zaporku."
 },"pluralForm" :"nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/hu.js b/apps/encryption/l10n/hu.js
index 7b00bb7695e..6becb3226d6 100644
--- a/apps/encryption/l10n/hu.js
+++ b/apps/encryption/l10n/hu.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Engedélyezve",
     "Disabled" : "Letiltva",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Jelentkezzen be a webes felületre, ugorjon a személyes beállításai „Biztonság” szakaszához, és frissítse a titkosítási jelszavát úgy, hogy megadja ezt a jelszót a „Régi bejelentkezési jelszó” mezőben, majd megadja a jelenlegi bejelentkezési jelszavát.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Ahhoz, hogy ezt a titkosítási modult használhassa, be kell kapcsolnia a\n\t\tkiszolgálóoldali titkosítást az adminisztrációs felületen.\n\t\tEngedélyezést követően a modul minden fájlt transzparensen titkosít.\n\t\tA titkosítás AES 256 kulcsokon alapul. A modul nem módosítja a meglévő\n\t\tfájlokat, csak az újakat titkosítja, miután bekapcsolta a\n\t\tkiszolgálóoldali titkosítást. Nem lehet kikapcsolni a titkosítást, hogy\n\t\ttitkosítatlan rendszerre váltson vissza. Olvassa el a dokumentációt,\n\t\thogy minden következménnyel tisztában legyen, mielőtt úgy dönt, hogy\n\t\tengedélyezi a kiszolgálóoldali titkosítást.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A helyreállítási kulcs egy a fájlok titkosítására szolgáló további titkosítási kulcs. A segítségével vissza lehet állítani a fájlokat, ha felhasználó elfelejtette a jelszavát."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/hu.json b/apps/encryption/l10n/hu.json
index 9cf8be547a7..f18717f97c3 100644
--- a/apps/encryption/l10n/hu.json
+++ b/apps/encryption/l10n/hu.json
@@ -59,7 +59,6 @@
     "Enabled" : "Engedélyezve",
     "Disabled" : "Letiltva",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Jelentkezzen be a webes felületre, ugorjon a személyes beállításai „Biztonság” szakaszához, és frissítse a titkosítási jelszavát úgy, hogy megadja ezt a jelszót a „Régi bejelentkezési jelszó” mezőben, majd megadja a jelenlegi bejelentkezési jelszavát.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Ahhoz, hogy ezt a titkosítási modult használhassa, be kell kapcsolnia a\n\t\tkiszolgálóoldali titkosítást az adminisztrációs felületen.\n\t\tEngedélyezést követően a modul minden fájlt transzparensen titkosít.\n\t\tA titkosítás AES 256 kulcsokon alapul. A modul nem módosítja a meglévő\n\t\tfájlokat, csak az újakat titkosítja, miután bekapcsolta a\n\t\tkiszolgálóoldali titkosítást. Nem lehet kikapcsolni a titkosítást, hogy\n\t\ttitkosítatlan rendszerre váltson vissza. Olvassa el a dokumentációt,\n\t\thogy minden következménnyel tisztában legyen, mielőtt úgy dönt, hogy\n\t\tengedélyezi a kiszolgálóoldali titkosítást.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A helyreállítási kulcs egy a fájlok titkosítására szolgáló további titkosítási kulcs. A segítségével vissza lehet állítani a fájlokat, ha felhasználó elfelejtette a jelszavát."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/id.js b/apps/encryption/l10n/id.js
index 6d9c6d4c18c..c03654e8cfa 100644
--- a/apps/encryption/l10n/id.js
+++ b/apps/encryption/l10n/id.js
@@ -56,7 +56,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Mengaktifkan opsi ini memungkinkan Anda untuk mendapatkan kembali akses ke berkas terenkripsi Anda dalam kasus kehilangan kata sandi",
     "Enabled" : "Diaktifkan",
     "Disabled" : "Dinonaktifkan",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Dalam penggunaan modul enkripsi data, Anda perlu mengaktifkan enkripsi sisi-peladen melalui setelan admin.\nSaat diaktifkan, modul akan mengenkripsi semua berkas Anda secara transparan.\nEnkripsi data yang digunakan berbasis pada kunci AES 256.\nModul ini tidak akan menyentuh berkas eksis, hanya berkas baru saja yang akan dienkripsi.\nTidak dimungkinkan untuk kembali menonaktifkan enkripsi data dan kembali tanpa menggunakan enkripsi data.\nSilakan baca dokumentasi untuk mengetahui semua implikasi sebelum Anda memutuskan untuk mengaktifkan enkripsi sisi-peladen.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Kunci pemulihan adalah kunci enkripsi tambahan yang digunakan untuk mengenkripsi berkas. Kunci pemulihan memungkinkan untuk memulihkan berkas pengguna ketika pengguna tersebut melupakan kata sandi mereka."
 },
 "nplurals=1; plural=0;");
diff --git a/apps/encryption/l10n/id.json b/apps/encryption/l10n/id.json
index c6c4109b349..6a03e686c63 100644
--- a/apps/encryption/l10n/id.json
+++ b/apps/encryption/l10n/id.json
@@ -54,7 +54,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Mengaktifkan opsi ini memungkinkan Anda untuk mendapatkan kembali akses ke berkas terenkripsi Anda dalam kasus kehilangan kata sandi",
     "Enabled" : "Diaktifkan",
     "Disabled" : "Dinonaktifkan",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Dalam penggunaan modul enkripsi data, Anda perlu mengaktifkan enkripsi sisi-peladen melalui setelan admin.\nSaat diaktifkan, modul akan mengenkripsi semua berkas Anda secara transparan.\nEnkripsi data yang digunakan berbasis pada kunci AES 256.\nModul ini tidak akan menyentuh berkas eksis, hanya berkas baru saja yang akan dienkripsi.\nTidak dimungkinkan untuk kembali menonaktifkan enkripsi data dan kembali tanpa menggunakan enkripsi data.\nSilakan baca dokumentasi untuk mengetahui semua implikasi sebelum Anda memutuskan untuk mengaktifkan enkripsi sisi-peladen.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Kunci pemulihan adalah kunci enkripsi tambahan yang digunakan untuk mengenkripsi berkas. Kunci pemulihan memungkinkan untuk memulihkan berkas pengguna ketika pengguna tersebut melupakan kata sandi mereka."
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/is.js b/apps/encryption/l10n/is.js
index 410bb62f788..d0baa6a421d 100644
--- a/apps/encryption/l10n/is.js
+++ b/apps/encryption/l10n/is.js
@@ -53,7 +53,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ef þessi kostur er virkur gerir það þér kleift að endurheimta aðgang að skránum þínum ef þú tapar lykilorðinu",
     "Enabled" : "Virkt",
     "Disabled" : "Óvirkt",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Til að geta notað þessa dulritunareiningu þarftu að virkja dulritun á þjóni\n\t\tí kerfisstjórnunarstillingunum. Þegar hún er orðin virk mun einingin dulrita\n\t\tallar skrárnar þínar á gagnsæan máta. Dulritunin byggir á AES 256-lyklum.\n\t\tEiningin mun ekki eiga við fyrirliggjandi skrár, einungis nýjar skrár verða\n\t\tdulritaðar eftir að dulritun er orðin virk á þjóni. Ekki er heldur hægt að\n\t\tgera dulritun aftur óvirka og skipta aftur til baka í ódulritað kerfi.\n\t\tÞú skalt endilega lesa hjálparskjölin til að sjá allar afleiðingar þessa\n\t\táður en þú virkjar dulritun á þjóninum.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Endurheimtingarlykill er auka-dulritunarlykill sem er notaður til að dulrita skrár. Hann gefur möguleika á að endurheimta skrár ef notandi gleymir lykilorðinu sínu."
 },
 "nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);");
diff --git a/apps/encryption/l10n/is.json b/apps/encryption/l10n/is.json
index c0589fd75c7..75f78ab9af2 100644
--- a/apps/encryption/l10n/is.json
+++ b/apps/encryption/l10n/is.json
@@ -51,7 +51,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ef þessi kostur er virkur gerir það þér kleift að endurheimta aðgang að skránum þínum ef þú tapar lykilorðinu",
     "Enabled" : "Virkt",
     "Disabled" : "Óvirkt",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Til að geta notað þessa dulritunareiningu þarftu að virkja dulritun á þjóni\n\t\tí kerfisstjórnunarstillingunum. Þegar hún er orðin virk mun einingin dulrita\n\t\tallar skrárnar þínar á gagnsæan máta. Dulritunin byggir á AES 256-lyklum.\n\t\tEiningin mun ekki eiga við fyrirliggjandi skrár, einungis nýjar skrár verða\n\t\tdulritaðar eftir að dulritun er orðin virk á þjóni. Ekki er heldur hægt að\n\t\tgera dulritun aftur óvirka og skipta aftur til baka í ódulritað kerfi.\n\t\tÞú skalt endilega lesa hjálparskjölin til að sjá allar afleiðingar þessa\n\t\táður en þú virkjar dulritun á þjóninum.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Endurheimtingarlykill er auka-dulritunarlykill sem er notaður til að dulrita skrár. Hann gefur möguleika á að endurheimta skrár ef notandi gleymir lykilorðinu sínu."
 },"pluralForm" :"nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/it.js b/apps/encryption/l10n/it.js
index 876ab568aca..00214bfe232 100644
--- a/apps/encryption/l10n/it.js
+++ b/apps/encryption/l10n/it.js
@@ -56,7 +56,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "L'abilitazione di questa opzione ti consentirà di accedere nuovamente ai file cifrati in caso di perdita della password",
     "Enabled" : "Abilitata",
     "Disabled" : "Disabilitata",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Per utilizzare questo modulo di cifratura, è necessario abilitare la cifratura\n\t\tlato server nelle impostazioni di amministrazione. Una volta abilitato, questo modulo\n\t\tcifrerà tutti i file in maniera trasparente. La cifratura è basata su chiavi AES 256.\n\t\tIl modulo non interesserà i file esistenti, solo i nuovi file saranno cifrati dopo\n\t\tl'abilitazione della cifratura lato server. Non è possibile disabilitare\n\t\tnuovamente la cifratura e tornare a un sistema non cifrato. Leggi la\n\t\tdocumentazione per conoscere tutte le implicazioni prima di decidere di abilitare\n\t\tla cifratura lato server.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La chiave di ripristino è una chiave di cifratura aggiuntiva utilizzata per cifrare i file. Consente di ripristinare i file di un utente se l'utente dimentica la propria password."
 },
 "nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;");
diff --git a/apps/encryption/l10n/it.json b/apps/encryption/l10n/it.json
index c5272a69dc7..74ddaf3e65c 100644
--- a/apps/encryption/l10n/it.json
+++ b/apps/encryption/l10n/it.json
@@ -54,7 +54,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "L'abilitazione di questa opzione ti consentirà di accedere nuovamente ai file cifrati in caso di perdita della password",
     "Enabled" : "Abilitata",
     "Disabled" : "Disabilitata",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Per utilizzare questo modulo di cifratura, è necessario abilitare la cifratura\n\t\tlato server nelle impostazioni di amministrazione. Una volta abilitato, questo modulo\n\t\tcifrerà tutti i file in maniera trasparente. La cifratura è basata su chiavi AES 256.\n\t\tIl modulo non interesserà i file esistenti, solo i nuovi file saranno cifrati dopo\n\t\tl'abilitazione della cifratura lato server. Non è possibile disabilitare\n\t\tnuovamente la cifratura e tornare a un sistema non cifrato. Leggi la\n\t\tdocumentazione per conoscere tutte le implicazioni prima di decidere di abilitare\n\t\tla cifratura lato server.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "La chiave di ripristino è una chiave di cifratura aggiuntiva utilizzata per cifrare i file. Consente di ripristinare i file di un utente se l'utente dimentica la propria password."
 },"pluralForm" :"nplurals=3; plural=n == 1 ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/ja.js b/apps/encryption/l10n/ja.js
index 84a24871dfe..ba252cfd3c6 100644
--- a/apps/encryption/l10n/ja.js
+++ b/apps/encryption/l10n/ja.js
@@ -58,7 +58,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "このオプションを有効にすると、パスワードを紛失した場合も、暗号化されたファイルに再度アクセスすることができるようになります。",
     "Enabled" : "有効",
     "Disabled" : "無効",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "この暗号化モジュールを使うには管理者画面でサーバーサイド暗号化を有効にする\n\t\t必要があります。このモジュールを一旦有効にすると全てのファイルが\n\t\t意識することなく暗号化されます。AES 256bit の鍵で暗号化されます。\n\t\tこのモジュールは既存ファイルはそのままで、サーバーサイド暗号化を\n\t\t有効にした後の新しいファイルのみ暗号化します。 一旦暗号化したシステムを\n\t\t無効化して元の暗号化されていない状態に戻すことはできません。\n\t\tサーバーサイド暗号化するかどうか決める前にドキュメントをよく読んで\n\t\t全ての要件を確認してください。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "復旧キーは、ファイルの暗号化に使う特別な暗号化キーです。ユーザーがパスワードを忘れてしまった場合には、リカバリキーを使ってユーザーのファイルを復元することができます。"
 },
 "nplurals=1; plural=0;");
diff --git a/apps/encryption/l10n/ja.json b/apps/encryption/l10n/ja.json
index 275608e94ad..51affc83d99 100644
--- a/apps/encryption/l10n/ja.json
+++ b/apps/encryption/l10n/ja.json
@@ -56,7 +56,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "このオプションを有効にすると、パスワードを紛失した場合も、暗号化されたファイルに再度アクセスすることができるようになります。",
     "Enabled" : "有効",
     "Disabled" : "無効",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "この暗号化モジュールを使うには管理者画面でサーバーサイド暗号化を有効にする\n\t\t必要があります。このモジュールを一旦有効にすると全てのファイルが\n\t\t意識することなく暗号化されます。AES 256bit の鍵で暗号化されます。\n\t\tこのモジュールは既存ファイルはそのままで、サーバーサイド暗号化を\n\t\t有効にした後の新しいファイルのみ暗号化します。 一旦暗号化したシステムを\n\t\t無効化して元の暗号化されていない状態に戻すことはできません。\n\t\tサーバーサイド暗号化するかどうか決める前にドキュメントをよく読んで\n\t\t全ての要件を確認してください。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "復旧キーは、ファイルの暗号化に使う特別な暗号化キーです。ユーザーがパスワードを忘れてしまった場合には、リカバリキーを使ってユーザーのファイルを復元することができます。"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/ka.js b/apps/encryption/l10n/ka.js
index 0dcbee2a391..6d8e50dd450 100644
--- a/apps/encryption/l10n/ka.js
+++ b/apps/encryption/l10n/ka.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Enabled",
     "Disabled" : "Disabled",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password."
 },
 "nplurals=2; plural=(n!=1);");
diff --git a/apps/encryption/l10n/ka.json b/apps/encryption/l10n/ka.json
index 21b2ae17300..45ead78dbb1 100644
--- a/apps/encryption/l10n/ka.json
+++ b/apps/encryption/l10n/ka.json
@@ -59,7 +59,6 @@
     "Enabled" : "Enabled",
     "Disabled" : "Disabled",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password."
 },"pluralForm" :"nplurals=2; plural=(n!=1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/ko.js b/apps/encryption/l10n/ko.js
index dc3434c402f..d42de3dd06f 100644
--- a/apps/encryption/l10n/ko.js
+++ b/apps/encryption/l10n/ko.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "활성화",
     "Disabled" : "비활성화",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "웹 인터페이스에 로그인하여 개인 설정의 \"보안\"으로 이동하고, \"이전 로그인 암호\" 필드에 위 암호를 입력한 후, 현재 로그인 암호를 입력하여 암호화 암호를 갱신하십시오. ",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "이 암호화 모듈을 사용하려면 관리자 설정에서 서버 측 암호화를 사용해야 합니다.\n\t\t서버 측 암호화를 활성화하면 이 모듈에서 모든 파일을 투명하게 암호화합니다.\n\t\t암호화는 AES 256 키로 진행됩니다. 이 모듈에서는 기존 파일은 암호화하지 않으며,\n\t\t서버 측 암호화를 활성화한 이후 새로 업로드한 파일만 암호화합니다. 한 번 암호화를\n\t\t활성화하면 암호화를 비활성화하고 암호화를 사용하지 않았던 상태로 돌아갈 수\n\t\t없습니다. 서버 측 암호화를 활성화하기 전에 문서를 참조하여 모든 조건과\n\t\t제약 사항을 확인하십시오.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "복구 키는 파일을 암호화하는 추가 키입니다. 사용자가 암호를 잊었을 때 복구할 수 있도록 해 줍니다."
 },
 "nplurals=1; plural=0;");
diff --git a/apps/encryption/l10n/ko.json b/apps/encryption/l10n/ko.json
index 7ee3cb085f2..1e83ee639e4 100644
--- a/apps/encryption/l10n/ko.json
+++ b/apps/encryption/l10n/ko.json
@@ -60,7 +60,6 @@
     "Enabled" : "활성화",
     "Disabled" : "비활성화",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "웹 인터페이스에 로그인하여 개인 설정의 \"보안\"으로 이동하고, \"이전 로그인 암호\" 필드에 위 암호를 입력한 후, 현재 로그인 암호를 입력하여 암호화 암호를 갱신하십시오. ",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "이 암호화 모듈을 사용하려면 관리자 설정에서 서버 측 암호화를 사용해야 합니다.\n\t\t서버 측 암호화를 활성화하면 이 모듈에서 모든 파일을 투명하게 암호화합니다.\n\t\t암호화는 AES 256 키로 진행됩니다. 이 모듈에서는 기존 파일은 암호화하지 않으며,\n\t\t서버 측 암호화를 활성화한 이후 새로 업로드한 파일만 암호화합니다. 한 번 암호화를\n\t\t활성화하면 암호화를 비활성화하고 암호화를 사용하지 않았던 상태로 돌아갈 수\n\t\t없습니다. 서버 측 암호화를 활성화하기 전에 문서를 참조하여 모든 조건과\n\t\t제약 사항을 확인하십시오.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "복구 키는 파일을 암호화하는 추가 키입니다. 사용자가 암호를 잊었을 때 복구할 수 있도록 해 줍니다."
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/lt_LT.js b/apps/encryption/l10n/lt_LT.js
index f8b292219d1..04396aba692 100644
--- a/apps/encryption/l10n/lt_LT.js
+++ b/apps/encryption/l10n/lt_LT.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Šios parinkties įjungimas leis jums iš naujo gauti prieigą prie savo užšifruotų duomenų tuo atveju, jei prarasite slaptažodį",
     "Enabled" : "Įjungta",
     "Disabled" : "Išjungta",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Kad galėtumėte naudoti šį šifravimo modulį,  turite įjungti serverio \n\t\tšifravimą administratoriaus nustatymuose. Įjungus šį modulį visi Jūsų failai bus užšifruoti\n\t\tŠifravimas pagrįstas AES 256 raktais.\n\t\tModulis užšifruos tik naujus failus, palikdamas senuosius taip kaip buvo iki šifravimo įjungimo.\n\t\tNeįmanoma išjungti šifravimą ir vėl sugrįžti prie nešifruojamos sistemos.\n\t\tPrieš nuspręsdami, atidžiai perskaitykite dokumentaciją, kad gerai suprastumėte visas šifravimo pasekmes.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Atkūrimo raktas yra papildomas šifravimo raktas, kuris naudojamas failų šifravimui. Jis leidžia atkurti naudotojo failus tuo atveju, jei naudotojas pamirš savo slaptažodį."
 },
 "nplurals=4; plural=(n % 10 == 1 && (n % 100 > 19 || n % 100 < 11) ? 0 : (n % 10 >= 2 && n % 10 <=9) && (n % 100 > 19 || n % 100 < 11) ? 1 : n % 1 != 0 ? 2: 3);");
diff --git a/apps/encryption/l10n/lt_LT.json b/apps/encryption/l10n/lt_LT.json
index 96a7702a5c2..b4e95d2a2dc 100644
--- a/apps/encryption/l10n/lt_LT.json
+++ b/apps/encryption/l10n/lt_LT.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Šios parinkties įjungimas leis jums iš naujo gauti prieigą prie savo užšifruotų duomenų tuo atveju, jei prarasite slaptažodį",
     "Enabled" : "Įjungta",
     "Disabled" : "Išjungta",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Kad galėtumėte naudoti šį šifravimo modulį,  turite įjungti serverio \n\t\tšifravimą administratoriaus nustatymuose. Įjungus šį modulį visi Jūsų failai bus užšifruoti\n\t\tŠifravimas pagrįstas AES 256 raktais.\n\t\tModulis užšifruos tik naujus failus, palikdamas senuosius taip kaip buvo iki šifravimo įjungimo.\n\t\tNeįmanoma išjungti šifravimą ir vėl sugrįžti prie nešifruojamos sistemos.\n\t\tPrieš nuspręsdami, atidžiai perskaitykite dokumentaciją, kad gerai suprastumėte visas šifravimo pasekmes.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Atkūrimo raktas yra papildomas šifravimo raktas, kuris naudojamas failų šifravimui. Jis leidžia atkurti naudotojo failus tuo atveju, jei naudotojas pamirš savo slaptažodį."
 },"pluralForm" :"nplurals=4; plural=(n % 10 == 1 && (n % 100 > 19 || n % 100 < 11) ? 0 : (n % 10 >= 2 && n % 10 <=9) && (n % 100 > 19 || n % 100 < 11) ? 1 : n % 1 != 0 ? 2: 3);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/nb.js b/apps/encryption/l10n/nb.js
index efdf82c548d..dd0cbd879eb 100644
--- a/apps/encryption/l10n/nb.js
+++ b/apps/encryption/l10n/nb.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Aktivert",
     "Disabled" : "Inaktiv",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Vennligst logg inn på webgrensesnittet, gå til delen \"Sikkerhet\" i dine personlige innstillinger og oppdater krypteringspassordet ditt ved å skrive inn dette passordet i feltet \"Gammelt påloggingspassord\" og ditt nåværende påloggingspassord.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "For å kunne bruke denne krypteringsmodulen må du kunne aktivere kryptering på serveren i administrasjonsinnstillingene. Når dette er aktivert vil modulen kryptere alle filene dine. Krypteringen er basert på AES 256-nøkler. Modulen vil ikke røre eksisterende filer, kun nye filer vil bli kryptert etter at dette ble aktivert. Det er heller ikke mulig å deaktivere krypteringen igjen for å bytte tilbake til et ukryptert system.\nVennligst les dokumentasjonen for å skjønne alle følgende før du bestemmer deg for å aktivere kryptering på serveren.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Gjenopprettingsnøkkelen er en ekstra krypteringsnøkkel som brukes til å kryptere filer. Den tillater gjenoppretting av en brukers filer i tilfelle brukeren glemmer passordet sitt."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/nb.json b/apps/encryption/l10n/nb.json
index 25989f45536..69ae5008eb6 100644
--- a/apps/encryption/l10n/nb.json
+++ b/apps/encryption/l10n/nb.json
@@ -60,7 +60,6 @@
     "Enabled" : "Aktivert",
     "Disabled" : "Inaktiv",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Vennligst logg inn på webgrensesnittet, gå til delen \"Sikkerhet\" i dine personlige innstillinger og oppdater krypteringspassordet ditt ved å skrive inn dette passordet i feltet \"Gammelt påloggingspassord\" og ditt nåværende påloggingspassord.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "For å kunne bruke denne krypteringsmodulen må du kunne aktivere kryptering på serveren i administrasjonsinnstillingene. Når dette er aktivert vil modulen kryptere alle filene dine. Krypteringen er basert på AES 256-nøkler. Modulen vil ikke røre eksisterende filer, kun nye filer vil bli kryptert etter at dette ble aktivert. Det er heller ikke mulig å deaktivere krypteringen igjen for å bytte tilbake til et ukryptert system.\nVennligst les dokumentasjonen for å skjønne alle følgende før du bestemmer deg for å aktivere kryptering på serveren.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Gjenopprettingsnøkkelen er en ekstra krypteringsnøkkel som brukes til å kryptere filer. Den tillater gjenoppretting av en brukers filer i tilfelle brukeren glemmer passordet sitt."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/nl.js b/apps/encryption/l10n/nl.js
index 0e27b76b87e..e52e1e1265d 100644
--- a/apps/encryption/l10n/nl.js
+++ b/apps/encryption/l10n/nl.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Het activeren van deze optie maakt het mogelijk om je versleutelde bestanden te benaderen als je wachtwoord kwijt is",
     "Enabled" : "Ingeschakeld",
     "Disabled" : "Uitgeschakeld",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Om deze cryptomodule te gebruiker moeten de volgende server-side aanpassingen worden gedaan\n\t\tversleuteling in de beheerinstellingen. Na inschakeling versleutelt deze module \n\t\tal je bestanden transparent. De versleuteling is gebaseerd op AES 256 sleutels.\n\t\tDe module raakt geen bestaande bestanden, alleen nieuwe bestanden worden versleuteld.\n\t\tNadat server-side crypto is ingeschakeld. Het is ook niet meer mogelijk\n\t\tom de versleuteling uit te zetten en terug te gaan naar een onversleuteld systeem.\n\t\tLees de documentatie om de gevolgen te kennen voordat je besluit\n\t\tserver-side versleuteling in te schakelen.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "De herstelsleutel is een extra cryptografische sleutel die wordt gebruikt om bestanden te versleutelen. Die maakt het mogelijk bestanden te herstellen als de gebruiker zijn of haar wachtwoord vergeet."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/nl.json b/apps/encryption/l10n/nl.json
index 932e0a7edb0..5f7a3ae0392 100644
--- a/apps/encryption/l10n/nl.json
+++ b/apps/encryption/l10n/nl.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Het activeren van deze optie maakt het mogelijk om je versleutelde bestanden te benaderen als je wachtwoord kwijt is",
     "Enabled" : "Ingeschakeld",
     "Disabled" : "Uitgeschakeld",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Om deze cryptomodule te gebruiker moeten de volgende server-side aanpassingen worden gedaan\n\t\tversleuteling in de beheerinstellingen. Na inschakeling versleutelt deze module \n\t\tal je bestanden transparent. De versleuteling is gebaseerd op AES 256 sleutels.\n\t\tDe module raakt geen bestaande bestanden, alleen nieuwe bestanden worden versleuteld.\n\t\tNadat server-side crypto is ingeschakeld. Het is ook niet meer mogelijk\n\t\tom de versleuteling uit te zetten en terug te gaan naar een onversleuteld systeem.\n\t\tLees de documentatie om de gevolgen te kennen voordat je besluit\n\t\tserver-side versleuteling in te schakelen.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "De herstelsleutel is een extra cryptografische sleutel die wordt gebruikt om bestanden te versleutelen. Die maakt het mogelijk bestanden te herstellen als de gebruiker zijn of haar wachtwoord vergeet."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/pl.js b/apps/encryption/l10n/pl.js
index c14c47250cc..2294c161199 100644
--- a/apps/encryption/l10n/pl.js
+++ b/apps/encryption/l10n/pl.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Włączone",
     "Disabled" : "Wyłączone",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Zaloguj się poprzez interfejs WEB, przejdź do zakładki \"ochrona\" w Twoich ustawieniach oraz zaktualizuj Twoje hasło szyfrowania wpisując je w pole \"stare hasło logowania\" i Twoje aktualne hasło do logowania.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Aby korzystać z modułu szyfrowania, musisz włączyć opcję po stronie serwera\n\t\tszyfrowanie w ustawieniach administratora. Po włączeniu opcji moduł będzie szyfrował\n\t\twszystkie Twoje pliki w sposób transparentny. Szyfrowanie oparte jest na kluczach AES 256.\n\t\tModuł nie będzie ingerował w istniejące pliki, tylko nowe pliki będą szyfrowane\n\t\tpo włączeniu szyfrowania po stronie serwera. Nie jest to również możliwe\n\t\tponownie wyłączenie szyfrowania i przełączenie z powrotem do niezaszyfrowanego systemu.\n\t\tPrzeczytaj dokumentację, aby zapoznać się ze wszystkimi konsekwencjami, zanim podejmiesz decyzję\n\t\to włączeniu szyfrowania po stronie serwera.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Kluczem do odzyskiwania jest dodatkowy klucz szyfrujący, który służy do szyfrowania plików. Umożliwia on odzyskanie plików użytkownika, jeśli użytkownik zapomni swoje hasło."
 },
 "nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);");
diff --git a/apps/encryption/l10n/pl.json b/apps/encryption/l10n/pl.json
index 4503f6b298c..a4450d124aa 100644
--- a/apps/encryption/l10n/pl.json
+++ b/apps/encryption/l10n/pl.json
@@ -59,7 +59,6 @@
     "Enabled" : "Włączone",
     "Disabled" : "Wyłączone",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Zaloguj się poprzez interfejs WEB, przejdź do zakładki \"ochrona\" w Twoich ustawieniach oraz zaktualizuj Twoje hasło szyfrowania wpisując je w pole \"stare hasło logowania\" i Twoje aktualne hasło do logowania.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Aby korzystać z modułu szyfrowania, musisz włączyć opcję po stronie serwera\n\t\tszyfrowanie w ustawieniach administratora. Po włączeniu opcji moduł będzie szyfrował\n\t\twszystkie Twoje pliki w sposób transparentny. Szyfrowanie oparte jest na kluczach AES 256.\n\t\tModuł nie będzie ingerował w istniejące pliki, tylko nowe pliki będą szyfrowane\n\t\tpo włączeniu szyfrowania po stronie serwera. Nie jest to również możliwe\n\t\tponownie wyłączenie szyfrowania i przełączenie z powrotem do niezaszyfrowanego systemu.\n\t\tPrzeczytaj dokumentację, aby zapoznać się ze wszystkimi konsekwencjami, zanim podejmiesz decyzję\n\t\to włączeniu szyfrowania po stronie serwera.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Kluczem do odzyskiwania jest dodatkowy klucz szyfrujący, który służy do szyfrowania plików. Umożliwia on odzyskanie plików użytkownika, jeśli użytkownik zapomni swoje hasło."
 },"pluralForm" :"nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/pt_BR.js b/apps/encryption/l10n/pt_BR.js
index 8cca40bcee4..0cc51937a0a 100644
--- a/apps/encryption/l10n/pt_BR.js
+++ b/apps/encryption/l10n/pt_BR.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Habilitado",
     "Disabled" : "Desabilitado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Faça login na interface da web, vá para a seção \"Segurança\" de suas configurações pessoais e atualize sua senha de criptografia inserindo esta senha no campo \"Senha de login antiga\" e sua senha de login atual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de criptografia, é necessário ativar a criptografia do\n\t\tlado do servidor nas configurações. Ativada, este módulo irá criptografar\n\t\ttodos os arquivos. A criptografia é baseada em chaves AES 256.\n\t\tO módulo não tocará em arquivos existentes, apenas os novos serão\n\t\tcriptografados após a criptografia do lado do servidor ser ativada. É também\n\t\tpossível desativar a criptografia e voltar a um sistema não criptografado.\n\t\tLeia a documentação para saber todas as implicações antes de decidir\n\t\tativar a criptografia do lado do servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A chave de recuperação é uma chave de criptografia extra que é utilizada para criptografar arquivos. Ela permite a recuperação de arquivos se um usuário esquecer sua senha."
 },
 "nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;");
diff --git a/apps/encryption/l10n/pt_BR.json b/apps/encryption/l10n/pt_BR.json
index 20a1f77a5d7..3d1dc416d6f 100644
--- a/apps/encryption/l10n/pt_BR.json
+++ b/apps/encryption/l10n/pt_BR.json
@@ -60,7 +60,6 @@
     "Enabled" : "Habilitado",
     "Disabled" : "Desabilitado",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Faça login na interface da web, vá para a seção \"Segurança\" de suas configurações pessoais e atualize sua senha de criptografia inserindo esta senha no campo \"Senha de login antiga\" e sua senha de login atual.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de criptografia, é necessário ativar a criptografia do\n\t\tlado do servidor nas configurações. Ativada, este módulo irá criptografar\n\t\ttodos os arquivos. A criptografia é baseada em chaves AES 256.\n\t\tO módulo não tocará em arquivos existentes, apenas os novos serão\n\t\tcriptografados após a criptografia do lado do servidor ser ativada. É também\n\t\tpossível desativar a criptografia e voltar a um sistema não criptografado.\n\t\tLeia a documentação para saber todas as implicações antes de decidir\n\t\tativar a criptografia do lado do servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A chave de recuperação é uma chave de criptografia extra que é utilizada para criptografar arquivos. Ela permite a recuperação de arquivos se um usuário esquecer sua senha."
 },"pluralForm" :"nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/pt_PT.js b/apps/encryption/l10n/pt_PT.js
index 75e7c056893..d905ef7df3e 100644
--- a/apps/encryption/l10n/pt_PT.js
+++ b/apps/encryption/l10n/pt_PT.js
@@ -53,7 +53,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ao ativar esta opção, irá fazer com que volte a obter o acesso aos seus ficheiros encriptados, se perder a palavra-passe",
     "Enabled" : "Ativada",
     "Disabled" : "Desativada",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de encriptação, você precisa ativar a encriptação do lado do servidor\n\t\t nas configurações de administrador. Uma vez ativado, este módulo encriptará\n\t\t todos os seus ficheiros de forma transparente. A encriptação é baseada em chaves AES 256.\n\t\t O módulo não tocará nos ficheiros existentes, apenas os novos serão encriptados\n\t\t depois da encriptação do lado do servidor ser ativada. Também não é possível\n\t\t desativar a encriptação novamente e voltar para um sistema não encriptado.\n\t\tPor favor leia a documentação para conhecer todas as implicações antes de decidir\n\t\tativar a encriptação no servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A chave de recuperação é uma chave de encriptação extra que é utilizada para encriptar os ficheiros. Esta permite a recuperação dos ficheiros do utilizador se este esquecer a sua senha."
 },
 "nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;");
diff --git a/apps/encryption/l10n/pt_PT.json b/apps/encryption/l10n/pt_PT.json
index c7262feb85d..523f9812af2 100644
--- a/apps/encryption/l10n/pt_PT.json
+++ b/apps/encryption/l10n/pt_PT.json
@@ -51,7 +51,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Ao ativar esta opção, irá fazer com que volte a obter o acesso aos seus ficheiros encriptados, se perder a palavra-passe",
     "Enabled" : "Ativada",
     "Disabled" : "Desativada",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de encriptação, você precisa ativar a encriptação do lado do servidor\n\t\t nas configurações de administrador. Uma vez ativado, este módulo encriptará\n\t\t todos os seus ficheiros de forma transparente. A encriptação é baseada em chaves AES 256.\n\t\t O módulo não tocará nos ficheiros existentes, apenas os novos serão encriptados\n\t\t depois da encriptação do lado do servidor ser ativada. Também não é possível\n\t\t desativar a encriptação novamente e voltar para um sistema não encriptado.\n\t\tPor favor leia a documentação para conhecer todas as implicações antes de decidir\n\t\tativar a encriptação no servidor.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "A chave de recuperação é uma chave de encriptação extra que é utilizada para encriptar os ficheiros. Esta permite a recuperação dos ficheiros do utilizador se este esquecer a sua senha."
 },"pluralForm" :"nplurals=3; plural=(n == 0 || n == 1) ? 0 : n != 0 && n % 1000000 == 0 ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/ru.js b/apps/encryption/l10n/ru.js
index a2c58cb44ad..da229bd362c 100644
--- a/apps/encryption/l10n/ru.js
+++ b/apps/encryption/l10n/ru.js
@@ -61,7 +61,6 @@ OC.L10N.register(
     "Enabled" : "Включено",
     "Disabled" : "Отключено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Пожалуйста, войдите в веб-интерфейс, перейдите в раздел \"Безопасность\" ваших личных настроек и обновите свой пароль шифрования, введя этот пароль в поле \"Старый пароль для входа\" и ваш текущий логин/пароль.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Перед началом использования использования необходимо включить этот модуль в разделе «Администрирование». Включённый модуль выполняет прозрачное шифрование файлов. Шифрование основано на алгоритме AES 256. Модуль не изменяет существующие файлы, шифруются только файлы, создаваемые после включения шифрования. Также невозможно отключить шифрование и вернуться к незашифрованной системе. Перед включением шифрования обязательно ознакомьтесь с документацией, чтобы узнать все последствия такого действия.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ключ восстановления -  это дополнительный ключ, который используется для шифрования файлов. Он позволяет восстановить пользовательские файлы в случае утери пароля."
 },
 "nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);");
diff --git a/apps/encryption/l10n/ru.json b/apps/encryption/l10n/ru.json
index 2ded9a94f78..b6df79a8c73 100644
--- a/apps/encryption/l10n/ru.json
+++ b/apps/encryption/l10n/ru.json
@@ -59,7 +59,6 @@
     "Enabled" : "Включено",
     "Disabled" : "Отключено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Пожалуйста, войдите в веб-интерфейс, перейдите в раздел \"Безопасность\" ваших личных настроек и обновите свой пароль шифрования, введя этот пароль в поле \"Старый пароль для входа\" и ваш текущий логин/пароль.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Перед началом использования использования необходимо включить этот модуль в разделе «Администрирование». Включённый модуль выполняет прозрачное шифрование файлов. Шифрование основано на алгоритме AES 256. Модуль не изменяет существующие файлы, шифруются только файлы, создаваемые после включения шифрования. Также невозможно отключить шифрование и вернуться к незашифрованной системе. Перед включением шифрования обязательно ознакомьтесь с документацией, чтобы узнать все последствия такого действия.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ключ восстановления -  это дополнительный ключ, который используется для шифрования файлов. Он позволяет восстановить пользовательские файлы в случае утери пароля."
 },"pluralForm" :"nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/sc.js b/apps/encryption/l10n/sc.js
index 94bb7840869..7b52b324222 100644
--- a/apps/encryption/l10n/sc.js
+++ b/apps/encryption/l10n/sc.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "S'abilitatzione di custu sèberu t'at a permìtere de torrare a intrare a is archìvios in casu chi nche perdas sa crae",
     "Enabled" : "Ativada",
     "Disabled" : "Disativada",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pro impreare custu mòdulu de tzifradura, tocat de ativare sa tzifradura lato server\n\t\tin sa cunfiguratzione de amministratzione. Una borta chi est ativadu, custu mòdulu\n\t\tat a tzifrare totu is archìvios in manera trasparente. Sa tzifradura est basada subra de craes AES 256..\n\t\tSu mòdulu no at a interessare is archìvios chi bi sunt, isceti is noos s'ant a tzifrare a pustis\n\t\ts'abilitatzione de sa tzifradura a s'ala de su serbidore. Non faghet a torrare a disativare\n\t\tsa tzifradura e a torrare a unu sistema tzifradu. Leghe sa\n\t\tdocumentatzione pro connòschere totu is implicatziones in antis de detzìdere de ativare\n\t\tsa tzifradura a s'ala de su serbidore.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Sa crae de riprìstinu est una crae de tzifradura in agiunta impreada pro tzifrare is archìvios. Cunsentit de ripristinare is archìvios si s'utente si nch'irmènticat sa crae."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/sc.json b/apps/encryption/l10n/sc.json
index 8b60fc594be..d0505928638 100644
--- a/apps/encryption/l10n/sc.json
+++ b/apps/encryption/l10n/sc.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "S'abilitatzione di custu sèberu t'at a permìtere de torrare a intrare a is archìvios in casu chi nche perdas sa crae",
     "Enabled" : "Ativada",
     "Disabled" : "Disativada",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pro impreare custu mòdulu de tzifradura, tocat de ativare sa tzifradura lato server\n\t\tin sa cunfiguratzione de amministratzione. Una borta chi est ativadu, custu mòdulu\n\t\tat a tzifrare totu is archìvios in manera trasparente. Sa tzifradura est basada subra de craes AES 256..\n\t\tSu mòdulu no at a interessare is archìvios chi bi sunt, isceti is noos s'ant a tzifrare a pustis\n\t\ts'abilitatzione de sa tzifradura a s'ala de su serbidore. Non faghet a torrare a disativare\n\t\tsa tzifradura e a torrare a unu sistema tzifradu. Leghe sa\n\t\tdocumentatzione pro connòschere totu is implicatziones in antis de detzìdere de ativare\n\t\tsa tzifradura a s'ala de su serbidore.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Sa crae de riprìstinu est una crae de tzifradura in agiunta impreada pro tzifrare is archìvios. Cunsentit de ripristinare is archìvios si s'utente si nch'irmènticat sa crae."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/sk.js b/apps/encryption/l10n/sk.js
index 4d78be456d4..3582587b5fc 100644
--- a/apps/encryption/l10n/sk.js
+++ b/apps/encryption/l10n/sk.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Povolené",
     "Disabled" : "Zakázané",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Prosím, prihláste sa do webového rozhrania, prejdite do sekcie \"Bezpečnosť\" vo vašich osobných nastaveniach a aktualizujte svoje šifrovacie heslo zadávaním tohto hesla do poľa \"Staré prihlasovacie heslo\" a vaše aktuálne prihlasovacie heslo.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pre použitie tohoto šifrovacieho modulu musíte povoliť šifrovanie\n\t\t na strane servra v správcovských nastaveniach. Po povolení tento modul zašifruje\n\t\ttransparentne všetky vaše súbory. Šifrovanie je založené na kľúčoch AES 256.\n\t\tModul nezmení existujúce súbory, zašifrované budú iba nové súbory\n\t\tpo povolení šifrovania na strane servra. Šifrovanie nieje možné opätovne\n\t\t vypnúť a prepnúť naspäť do nešifroveného systému.\n\t\tPred rozhodnutím povoliť ifrovanie na strane servra\n\t\tsi prosím prečítajte dokumentáciu aby ste poznali všetky dôsledky.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Záchranný kľúč je ďalší šifrovací kľúč, ktorý sa používa na šifrovanie súborov. Umožňuje záchranu súborov používateľa ak zabudne svoje heslo."
 },
 "nplurals=4; plural=(n % 1 == 0 && n == 1 ? 0 : n % 1 == 0 && n >= 2 && n <= 4 ? 1 : n % 1 != 0 ? 2: 3);");
diff --git a/apps/encryption/l10n/sk.json b/apps/encryption/l10n/sk.json
index 474453bb1ea..009f09e279c 100644
--- a/apps/encryption/l10n/sk.json
+++ b/apps/encryption/l10n/sk.json
@@ -60,7 +60,6 @@
     "Enabled" : "Povolené",
     "Disabled" : "Zakázané",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Prosím, prihláste sa do webového rozhrania, prejdite do sekcie \"Bezpečnosť\" vo vašich osobných nastaveniach a aktualizujte svoje šifrovacie heslo zadávaním tohto hesla do poľa \"Staré prihlasovacie heslo\" a vaše aktuálne prihlasovacie heslo.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Pre použitie tohoto šifrovacieho modulu musíte povoliť šifrovanie\n\t\t na strane servra v správcovských nastaveniach. Po povolení tento modul zašifruje\n\t\ttransparentne všetky vaše súbory. Šifrovanie je založené na kľúčoch AES 256.\n\t\tModul nezmení existujúce súbory, zašifrované budú iba nové súbory\n\t\tpo povolení šifrovania na strane servra. Šifrovanie nieje možné opätovne\n\t\t vypnúť a prepnúť naspäť do nešifroveného systému.\n\t\tPred rozhodnutím povoliť ifrovanie na strane servra\n\t\tsi prosím prečítajte dokumentáciu aby ste poznali všetky dôsledky.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Záchranný kľúč je ďalší šifrovací kľúč, ktorý sa používa na šifrovanie súborov. Umožňuje záchranu súborov používateľa ak zabudne svoje heslo."
 },"pluralForm" :"nplurals=4; plural=(n % 1 == 0 && n == 1 ? 0 : n % 1 == 0 && n >= 2 && n <= 4 ? 1 : n % 1 != 0 ? 2: 3);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/sl.js b/apps/encryption/l10n/sl.js
index 8f7601cc940..0b28f87952e 100644
--- a/apps/encryption/l10n/sl.js
+++ b/apps/encryption/l10n/sl.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Nastavitev te možnosti omogoča ponovno pridobitev dostopa do šifriranih datotek, v primeru, da geslo pozabite.",
     "Enabled" : "Omogočeno",
     "Disabled" : "Onemogočeno",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Za uporabo tega šifrirnega modula je treba na strežniku omogočiti\n\t\tšifriranje med »skrbniškimi nastavitvami«. Ko je modul omogočen, bo samodejno izvedeno šifriranje\n\t\tvseh datotek. Šifriranje je zasnovano po protokolu AES 256.\n\t\tŠifriranje je onemogočeno za obstoječe datoteke, postopek se izvede le za nove,\n\t\tustvarjene po omogočanju šifriranja. Prav tako ni mogoče\n\t\tonemogočiti šifriranja in povrniti sistem v nešifriran.\n\t\tPred dokončno odločitvijo je priporočljivo natančno pregrati dokumentacijo,\n\t\t in temeljito razmisliti o posledicah.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Obnovitveni ključ je dodatni šifrirni ključ, ki se uporablja pri šifriranju datotek. Omogoča obnovitev uporabnikovih datotek, če uporabnih pozabi svoje geslo za dostop."
 },
 "nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n%100==4 ? 2 : 3);");
diff --git a/apps/encryption/l10n/sl.json b/apps/encryption/l10n/sl.json
index cf194b6ed74..58f7ff703f5 100644
--- a/apps/encryption/l10n/sl.json
+++ b/apps/encryption/l10n/sl.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "Nastavitev te možnosti omogoča ponovno pridobitev dostopa do šifriranih datotek, v primeru, da geslo pozabite.",
     "Enabled" : "Omogočeno",
     "Disabled" : "Onemogočeno",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Za uporabo tega šifrirnega modula je treba na strežniku omogočiti\n\t\tšifriranje med »skrbniškimi nastavitvami«. Ko je modul omogočen, bo samodejno izvedeno šifriranje\n\t\tvseh datotek. Šifriranje je zasnovano po protokolu AES 256.\n\t\tŠifriranje je onemogočeno za obstoječe datoteke, postopek se izvede le za nove,\n\t\tustvarjene po omogočanju šifriranja. Prav tako ni mogoče\n\t\tonemogočiti šifriranja in povrniti sistem v nešifriran.\n\t\tPred dokončno odločitvijo je priporočljivo natančno pregrati dokumentacijo,\n\t\t in temeljito razmisliti o posledicah.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Obnovitveni ključ je dodatni šifrirni ključ, ki se uporablja pri šifriranju datotek. Omogoča obnovitev uporabnikovih datotek, če uporabnih pozabi svoje geslo za dostop."
 },"pluralForm" :"nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n%100==4 ? 2 : 3);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/sr.js b/apps/encryption/l10n/sr.js
index c36175eb216..6f2d7ba213e 100644
--- a/apps/encryption/l10n/sr.js
+++ b/apps/encryption/l10n/sr.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "укључено",
     "Disabled" : "искључено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Молимо вас да се пријавите на веб интерфејс, одете на одељак „Безбедност” ваших личник подешавања и ажурирате своју лозинку за шифровање уносећи ову лозинку у поље „Стара лозинка за пријаву” и своју текућу лозинку за пријаву.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Да бисте користили овај модул, морате на серверској страни омогућити\n\t\tшифровање у администраторским поставкама. Једном укључен, овај модул ће шифровати\n\t\tсве фајлове транспарентно. Шифровање је базирано на „AES 256“ кључевима.\n\t\tМодул неће дирати постојеће фајлове, само ће нови фајлови бити шифровани\n\t\tнакон укључења шифровања на серверској страни. Није могуће да\n\t\tсе искључи шифровање и да врати се на нешифровани систем.\n\t\tПрочитајте документацију да сазнате све импликације пре него што се одлучите\n\t\tда укључите шифровање на серверу.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Кључ за опоравак је додатни шифрарски кључ који се користи за шифровање фајлова. Он омогућава опоравак корисничких фајлова ако корисник заборави своју лозинку."
 },
 "nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);");
diff --git a/apps/encryption/l10n/sr.json b/apps/encryption/l10n/sr.json
index 7ef1ea2ab4d..f90aa09d621 100644
--- a/apps/encryption/l10n/sr.json
+++ b/apps/encryption/l10n/sr.json
@@ -60,7 +60,6 @@
     "Enabled" : "укључено",
     "Disabled" : "искључено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Молимо вас да се пријавите на веб интерфејс, одете на одељак „Безбедност” ваших личник подешавања и ажурирате своју лозинку за шифровање уносећи ову лозинку у поље „Стара лозинка за пријаву” и своју текућу лозинку за пријаву.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Да бисте користили овај модул, морате на серверској страни омогућити\n\t\tшифровање у администраторским поставкама. Једном укључен, овај модул ће шифровати\n\t\tсве фајлове транспарентно. Шифровање је базирано на „AES 256“ кључевима.\n\t\tМодул неће дирати постојеће фајлове, само ће нови фајлови бити шифровани\n\t\tнакон укључења шифровања на серверској страни. Није могуће да\n\t\tсе искључи шифровање и да врати се на нешифровани систем.\n\t\tПрочитајте документацију да сазнате све импликације пре него што се одлучите\n\t\tда укључите шифровање на серверу.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Кључ за опоравак је додатни шифрарски кључ који се користи за шифровање фајлова. Он омогућава опоравак корисничких фајлова ако корисник заборави своју лозинку."
 },"pluralForm" :"nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/sv.js b/apps/encryption/l10n/sv.js
index 75b47f13ea7..3d7c7cd22bb 100644
--- a/apps/encryption/l10n/sv.js
+++ b/apps/encryption/l10n/sv.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Aktiverad",
     "Disabled" : "Inaktiverad",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Logga in i webbgränssnittet, gå till \"Säkerhet\" i dina personliga inställningar och uppdatera ditt krypteringslösenord genom att ange detta lösenord i fältet \"Gammalt inloggningslösenord\" samt ditt nuvarande inloggningslösenord.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "För att kunna använda denna krypteringsmodul måste du aktivera serversidan\n\t\tkryptering i admininställningarna. När den här modulen är aktiverad kommer den att kryptera\n\t\talla dina filer transparent. Krypteringen är baserad på AES 256 nycklar.\n\t\tModulen kommer inte att röra befintliga filer, bara nya filer kommer att krypteras\n\t\tefter serversidskryptering aktiverades. Det är inte heller möjligt att\n\t\tinaktivera krypteringen igen och växla tillbaka till ett okrypterat system.\n\t\tVänligen läs dokumentationen för att veta alla konsekvenser innan du bestämmer dig\n\t\tför att aktivera kryptering på serversidan.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Återställningsnyckeln är en extra krypteringsnyckel som används för att kryptera filer. Den gör det möjligt att återställa en användares filer om användaren glömmer sitt lösenord."
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/encryption/l10n/sv.json b/apps/encryption/l10n/sv.json
index e3b04cadc97..fd98517b5cb 100644
--- a/apps/encryption/l10n/sv.json
+++ b/apps/encryption/l10n/sv.json
@@ -60,7 +60,6 @@
     "Enabled" : "Aktiverad",
     "Disabled" : "Inaktiverad",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Logga in i webbgränssnittet, gå till \"Säkerhet\" i dina personliga inställningar och uppdatera ditt krypteringslösenord genom att ange detta lösenord i fältet \"Gammalt inloggningslösenord\" samt ditt nuvarande inloggningslösenord.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "För att kunna använda denna krypteringsmodul måste du aktivera serversidan\n\t\tkryptering i admininställningarna. När den här modulen är aktiverad kommer den att kryptera\n\t\talla dina filer transparent. Krypteringen är baserad på AES 256 nycklar.\n\t\tModulen kommer inte att röra befintliga filer, bara nya filer kommer att krypteras\n\t\tefter serversidskryptering aktiverades. Det är inte heller möjligt att\n\t\tinaktivera krypteringen igen och växla tillbaka till ett okrypterat system.\n\t\tVänligen läs dokumentationen för att veta alla konsekvenser innan du bestämmer dig\n\t\tför att aktivera kryptering på serversidan.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Återställningsnyckeln är en extra krypteringsnyckel som används för att kryptera filer. Den gör det möjligt att återställa en användares filer om användaren glömmer sitt lösenord."
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/tr.js b/apps/encryption/l10n/tr.js
index 1c36496dd78..2737c4a5c31 100644
--- a/apps/encryption/l10n/tr.js
+++ b/apps/encryption/l10n/tr.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Etkin",
     "Disabled" : "Devre dışı",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Lütfen yönetim bölümünden oturum açarak kişisel ayarlarınızdaki \"Güvenlik\" bölümüne gidin ve \"Eski oturum açma parolası\" alanına bu parolayı ve geçerli oturum açma parolanızı yazarak şifreleme parolanızı güncelleyin.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Bu şifreleme modülünün kullanılması için sunucu tarafında yönetim bölümünden\n\t\tşifreleme seçeneği etkinleştirilmelidir. Bu modül etkinleştirildikten sonra \n\t\ttüm dosyalarınızı size farkettirmeden şifreler. Şifreleme AES 256 anahtarları\n\t\tile yapılır. Modül var olan dosyaları değiştirmez, yalnızca sunucu tarafında \n\t\tşifreleme etkinleştirildikten sonra eklenen yeni dosyalar şifrelenir. \n\t\tŞifreleme etkinleştirildikten sonra devre dışı bırakılamaz ve şifreleme olmayan\n\t\tsisteme geri dönülemez. Lütfen sunucu tarafı şifrelemeyi etkinleştirmeden önce\n\t\tbelgeleri okuyun ve uygulamadan doğacak tüm sonuçlarını öğrenin.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Kurtarma anahtarı, dosyaların şifrelenmesi için ek bir güvenlik sağlar. Böylece kullanıcı unutursa dosyalarının parolasını sıfırlayabilir."
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/apps/encryption/l10n/tr.json b/apps/encryption/l10n/tr.json
index d70a49b260a..4351da3eedb 100644
--- a/apps/encryption/l10n/tr.json
+++ b/apps/encryption/l10n/tr.json
@@ -60,7 +60,6 @@
     "Enabled" : "Etkin",
     "Disabled" : "Devre dışı",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Lütfen yönetim bölümünden oturum açarak kişisel ayarlarınızdaki \"Güvenlik\" bölümüne gidin ve \"Eski oturum açma parolası\" alanına bu parolayı ve geçerli oturum açma parolanızı yazarak şifreleme parolanızı güncelleyin.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Bu şifreleme modülünün kullanılması için sunucu tarafında yönetim bölümünden\n\t\tşifreleme seçeneği etkinleştirilmelidir. Bu modül etkinleştirildikten sonra \n\t\ttüm dosyalarınızı size farkettirmeden şifreler. Şifreleme AES 256 anahtarları\n\t\tile yapılır. Modül var olan dosyaları değiştirmez, yalnızca sunucu tarafında \n\t\tşifreleme etkinleştirildikten sonra eklenen yeni dosyalar şifrelenir. \n\t\tŞifreleme etkinleştirildikten sonra devre dışı bırakılamaz ve şifreleme olmayan\n\t\tsisteme geri dönülemez. Lütfen sunucu tarafı şifrelemeyi etkinleştirmeden önce\n\t\tbelgeleri okuyun ve uygulamadan doğacak tüm sonuçlarını öğrenin.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Kurtarma anahtarı, dosyaların şifrelenmesi için ek bir güvenlik sağlar. Böylece kullanıcı unutursa dosyalarının parolasını sıfırlayabilir."
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/uk.js b/apps/encryption/l10n/uk.js
index 7557e62970c..55b22554ec1 100644
--- a/apps/encryption/l10n/uk.js
+++ b/apps/encryption/l10n/uk.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "Увімкнено",
     "Disabled" : "Вимкнено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Будь ласка, відкрийте вебсторінку хмари, перейдіть до розділу \"Безпека\" у особистих налаштуваннях та оновіть пароль шифрування, для цього зазначте парольні фрази у полях \"Старий пароль для входу\" та поточний пароль.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Для користування цим модулем шифрування потрібно увімкнути шифрування даних на рівні сервера \n\t\tу налаштуваннях адміністратора. Одразу після увімкнення цього модуля ваші дані буде \n\t\tзашифровано з використанням AES 256 ключа. Зверніть увагу, що цей модуль передбачає, \n\t\tщо шифрування буде застосовано тільки до нових файлів, файли, які було створено до \n\t\tувімкнення шифрування залишаться незашифровані. Також подалі не буде можливо \n\t\tвимкнути шифрування та повернутися до незашифрованого стану системи.\n\t\tБудь ласка, ознайомтеся з документацією та врахуйте всі ризики до того, як \n\t\tувімкнете шифрування на рівні сервера.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ключ відновлення — це додатковий ключ шифрування, який використовується для шифрування файлів. Це дозволяє відновити файли користувача, якщо користувач забув свій пароль."
 },
 "nplurals=4; plural=(n % 1 == 0 && n % 10 == 1 && n % 100 != 11 ? 0 : n % 1 == 0 && n % 10 >= 2 && n % 10 <= 4 && (n % 100 < 12 || n % 100 > 14) ? 1 : n % 1 == 0 && (n % 10 ==0 || (n % 10 >=5 && n % 10 <=9) || (n % 100 >=11 && n % 100 <=14 )) ? 2: 3);");
diff --git a/apps/encryption/l10n/uk.json b/apps/encryption/l10n/uk.json
index 8d2cfe33925..3e3c3c7cd07 100644
--- a/apps/encryption/l10n/uk.json
+++ b/apps/encryption/l10n/uk.json
@@ -60,7 +60,6 @@
     "Enabled" : "Увімкнено",
     "Disabled" : "Вимкнено",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "Будь ласка, відкрийте вебсторінку хмари, перейдіть до розділу \"Безпека\" у особистих налаштуваннях та оновіть пароль шифрування, для цього зазначте парольні фрази у полях \"Старий пароль для входу\" та поточний пароль.",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Для користування цим модулем шифрування потрібно увімкнути шифрування даних на рівні сервера \n\t\tу налаштуваннях адміністратора. Одразу після увімкнення цього модуля ваші дані буде \n\t\tзашифровано з використанням AES 256 ключа. Зверніть увагу, що цей модуль передбачає, \n\t\tщо шифрування буде застосовано тільки до нових файлів, файли, які було створено до \n\t\tувімкнення шифрування залишаться незашифровані. Також подалі не буде можливо \n\t\tвимкнути шифрування та повернутися до незашифрованого стану системи.\n\t\tБудь ласка, ознайомтеся з документацією та врахуйте всі ризики до того, як \n\t\tувімкнете шифрування на рівні сервера.",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "Ключ відновлення — це додатковий ключ шифрування, який використовується для шифрування файлів. Це дозволяє відновити файли користувача, якщо користувач забув свій пароль."
 },"pluralForm" :"nplurals=4; plural=(n % 1 == 0 && n % 10 == 1 && n % 100 != 11 ? 0 : n % 1 == 0 && n % 10 >= 2 && n % 10 <= 4 && (n % 100 < 12 || n % 100 > 14) ? 1 : n % 1 == 0 && (n % 10 ==0 || (n % 10 >=5 && n % 10 <=9) || (n % 100 >=11 && n % 100 <=14 )) ? 2: 3);"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/zh_CN.js b/apps/encryption/l10n/zh_CN.js
index 6b089da610a..e9bbae57ca4 100644
--- a/apps/encryption/l10n/zh_CN.js
+++ b/apps/encryption/l10n/zh_CN.js
@@ -55,7 +55,6 @@ OC.L10N.register(
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "启用该项将允许您在密码丢失后取回您的加密文件",
     "Enabled" : "启用",
     "Disabled" : "禁用",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "您需要在管理员设置中启用服务器端加密功能以使用此加密模块。\n\t\t此模块一旦被启用您的所有文件将被其透明地加密。\n\t\t加密基于AES 256密钥。在服务器端加密功能启用后，此模块\n\t\t将不会触碰已存在的文件，而只会对新文件进行加密。\n\t\t再次禁用加密功能也不可能切换回一个未加密的系统。\n\t\t在您决定启用服务器端加密功能前请阅读文档以了解\n\t\t这一操作的所有后果。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "恢复密钥是用于加密文件的额外加密密钥。如果用户忘记了密码，它允许用户恢复文件。"
 },
 "nplurals=1; plural=0;");
diff --git a/apps/encryption/l10n/zh_CN.json b/apps/encryption/l10n/zh_CN.json
index 7228c5e9c9c..8580084640d 100644
--- a/apps/encryption/l10n/zh_CN.json
+++ b/apps/encryption/l10n/zh_CN.json
@@ -53,7 +53,6 @@
     "Enabling this option will allow you to reobtain access to your encrypted files in case of password loss" : "启用该项将允许您在密码丢失后取回您的加密文件",
     "Enabled" : "启用",
     "Disabled" : "禁用",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "您需要在管理员设置中启用服务器端加密功能以使用此加密模块。\n\t\t此模块一旦被启用您的所有文件将被其透明地加密。\n\t\t加密基于AES 256密钥。在服务器端加密功能启用后，此模块\n\t\t将不会触碰已存在的文件，而只会对新文件进行加密。\n\t\t再次禁用加密功能也不可能切换回一个未加密的系统。\n\t\t在您决定启用服务器端加密功能前请阅读文档以了解\n\t\t这一操作的所有后果。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "恢复密钥是用于加密文件的额外加密密钥。如果用户忘记了密码，它允许用户恢复文件。"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/zh_HK.js b/apps/encryption/l10n/zh_HK.js
index 2bef1514dfc..477457bc5bf 100644
--- a/apps/encryption/l10n/zh_HK.js
+++ b/apps/encryption/l10n/zh_HK.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "已啓用",
     "Disabled" : "已停用",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "請登錄到網絡界面，轉到您個人設置的“安全”部分，並通過在“舊登錄密碼”字段中輸入此密碼和您當前的登錄密碼來更新您的登入密碼。",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "為了使用此加密模組，您需要啟用伺服器端\n管理員設置中的加密設定。啟用後，該模組將加密您的所有之後傳輸的檔案。此加密方式使用AES 256密鑰。\n該模組不會觸及已存在的檔案，只會加密新處理的檔案\n啟用伺服器端加密後。也不可能\n再次停用加密，然後切換回未加密的系統。\n在決定啟用伺服器端加密之前，請閱讀文檔以了解所有含義。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "加密密鑰是另一種加密檔案方式，當用戶忘記密碼時，可以用還原密鑰來還原檔案"
 },
 "nplurals=1; plural=0;");
diff --git a/apps/encryption/l10n/zh_HK.json b/apps/encryption/l10n/zh_HK.json
index 39a712dc305..261d0e2665d 100644
--- a/apps/encryption/l10n/zh_HK.json
+++ b/apps/encryption/l10n/zh_HK.json
@@ -60,7 +60,6 @@
     "Enabled" : "已啓用",
     "Disabled" : "已停用",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "請登錄到網絡界面，轉到您個人設置的“安全”部分，並通過在“舊登錄密碼”字段中輸入此密碼和您當前的登錄密碼來更新您的登入密碼。",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "為了使用此加密模組，您需要啟用伺服器端\n管理員設置中的加密設定。啟用後，該模組將加密您的所有之後傳輸的檔案。此加密方式使用AES 256密鑰。\n該模組不會觸及已存在的檔案，只會加密新處理的檔案\n啟用伺服器端加密後。也不可能\n再次停用加密，然後切換回未加密的系統。\n在決定啟用伺服器端加密之前，請閱讀文檔以了解所有含義。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "加密密鑰是另一種加密檔案方式，當用戶忘記密碼時，可以用還原密鑰來還原檔案"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/apps/encryption/l10n/zh_TW.js b/apps/encryption/l10n/zh_TW.js
index 7909f74e41f..523560205f2 100644
--- a/apps/encryption/l10n/zh_TW.js
+++ b/apps/encryption/l10n/zh_TW.js
@@ -62,7 +62,6 @@ OC.L10N.register(
     "Enabled" : "已啟用",
     "Disabled" : "已停用",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "請登入網頁界面，請到個人設定中的「安全」區塊，透過輸入此密碼至「舊登入密碼」欄位與您目前的登入密碼來更新您的加密密碼。",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "為了使用此加密模組，您必須在管理員設定中\n\t\t啟用伺服器端加密。啟用後，此模組將會\n\t\t加密您之後傳輸的所有檔案。此加密是以 AES 256 金鑰為基礎。\n\t\t此模組將不會處理既有的檔案，僅會加密\n\t\t在伺服器端加密啟用後的新檔案。同時也\n\t\t無法停用加密並切換回未加密的系統。\n\t\t在您決定啟用伺服器端加密前，請閱讀文\n\t\t件得知其實際作用與影響。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "還原金鑰是用於加密檔案的另一把加密金鑰。當使用者忘記密碼時，可以用它來還原使用者的檔案。"
 },
 "nplurals=1; plural=0;");
diff --git a/apps/encryption/l10n/zh_TW.json b/apps/encryption/l10n/zh_TW.json
index 7c91d910b1a..f532df430ff 100644
--- a/apps/encryption/l10n/zh_TW.json
+++ b/apps/encryption/l10n/zh_TW.json
@@ -60,7 +60,6 @@
     "Enabled" : "已啟用",
     "Disabled" : "已停用",
     "Please login to the web interface, go to the \"Security\" section of your personal settings and update your encryption password by entering this password into the \"Old log-in password\" field and your current login-password." : "請登入網頁界面，請到個人設定中的「安全」區塊，透過輸入此密碼至「舊登入密碼」欄位與您目前的登入密碼來更新您的加密密碼。",
-    "In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "為了使用此加密模組，您必須在管理員設定中\n\t\t啟用伺服器端加密。啟用後，此模組將會\n\t\t加密您之後傳輸的所有檔案。此加密是以 AES 256 金鑰為基礎。\n\t\t此模組將不會處理既有的檔案，僅會加密\n\t\t在伺服器端加密啟用後的新檔案。同時也\n\t\t無法停用加密並切換回未加密的系統。\n\t\t在您決定啟用伺服器端加密前，請閱讀文\n\t\t件得知其實際作用與影響。",
     "The recovery key is an extra encryption key that is used to encrypt files. It allows recovery of a user's files if the user forgets his or her password." : "還原金鑰是用於加密檔案的另一把加密金鑰。當使用者忘記密碼時，可以用它來還原使用者的檔案。"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file