"Maintenance mode is kept active" : "伺服器正處於維護模式",

"Updating database schema" : "正在更新資料庫格式",

"Updated database" : "已更新資料庫",

"Update app \"%s\" from App Store" : "從應用程式商店更新應用程式「%s」",

"Checking whether the database schema for %s can be updated (this can take a long time depending on the database size)" : "檢查 %s 是否有可更新的資料庫格式（若資料庫較大，可能需要一段時間）",

"Updated \"%1$s\" to %2$s" : "已從 %1$s 更新至 %2$s",

"Set log level to debug" : "設定記錄至除錯層級",

"PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 設定似乎不完整，導致無法正確取得系統環境變數，因為偵測到 getenv(\"PATH\") 回傳資料為空值",

"Please check the {linkstart}installation documentation ↗{linkend} for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "請參考{linkstart}安裝文件 ↗{linkend}中 PHP 設定的註記，並檢查您伺服器上的 PHP 設定，特別是如果您是使用 php-fpm 的情況下。",

"The read-only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用，這樣可以防止來自網頁端的設定操作，每次需要更改設定時，都需要手動將設定檔暫時改為可讀寫。",

"Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的資料庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時，這可能會造成問題。",

"The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未偵測到 PHP 模組 \"fileinfo\"。強烈建議啟用這個模組，以取得最好的 MIME 檔案類型偵測支援。",

"Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 \"filelocking.enabled\" 以避免出現這樣的問題，請參考{linkstart}文件 ↗{linkend}來了解更多的資訊。",

"The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "偵測到您的反向代理標頭設定不正確，但也有可能是因為您目前正透過信任的代理伺服器存取 Nextcloud。若您目前不是透過信任的代理伺服器存取 Nextcloud，這就是一個安全性問題，允許攻擊者對 Nextcloud 假冒 IP 位址。更多資訊請查閱{linkstart}文件 ↗{linkend}。",

"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached是用於分散式緩存的設置，但是目前安裝了錯誤的PHP模組為「memcache」。\\OC\\Memcache\\Memcached僅支援「memcached」而不是「memcache」。請參閱 {linkstart}memcached wiki了解兩種模組資訊 ↗{linkend}。",

"Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "部份檔案未通過完整性檢查。更多關於如何解決此問題的資訊可在{linkstart1}文件 ↗{linkend}中找到。（{linkstart2}無效檔案列表……{linkend} / {linkstart3}重新掃描……{linkend}）",

"The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "無法取得 PHP 中的 \"set_time_limit\" 函式。這可能導致執行過程被終止並造成不完整安裝。我們強烈建議啟用該函式。",

"Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "您的 PHP 並未啟用 FreeType 支援，導致大頭貼產生器和設定界面無法使用。",

"Missing index \"{indexName}\" in table \"{tableName}\"." : "在資料表 \"{tableName}\" 中，找不到索引值 \"{indexName}\" 。",

"Your files are encrypted. There will be no way to get your data back after your password is reset. If you are not sure what to do, please contact your administrator before you continue. Do you really want to continue?" : "由於您已啟用檔案加密，重設密碼後，您的資料將無法解密。若您不確定繼續與否，請與管理員聯繫。確定要繼續嗎？",

"I know what I'm doing" : "我知道我在幹嘛",

"Resetting password" : "重設密碼",

"Recommended apps" : "推薦的應用程式",

"Loading apps …" : "正在載入應用程式…",

"Could not fetch list of apps from the App Store." : "無法從應用程式商店擷取應用程式清單。",

"Back" : "返回",

"Login form is disabled." : "登入表單已停用。",

"Edit Profile" : "編輯個人檔案",

"Error opening the user status modal, try hard refreshing the page" : "開啟使用者狀態模式時發生問題，嘗試重新整理頁面",

"Reset search" : "重置搜尋",

"Search for {name} only" : "僅搜尋 {name}",

"You chose SQLite as database." : "您選擇了 SQLite 作為資料庫",

"SQLite should only be used for minimal and development instances. For production we recommend a different database backend." : "SQLite 只適用於小型或是開發用站台，針對上線服務我們建議使用其他資料庫後端。",

"If you use clients for file syncing, the use of SQLite is highly discouraged." : "若使用桌面版或是手機版客戶端同步檔案，不建議使用 SQLite",

"Need help?" : "需要協助嗎？",

"See the documentation" : "閱讀說明文件",

"It looks like you are trying to reinstall your Nextcloud. However the file CAN_INSTALL is missing from your config directory. Please create the file CAN_INSTALL in your config folder to continue." : "您似乎正在嘗試重新安裝您的 Nextcloud。然而，檔案 CAN_INSTALL 並不在您的 config 目錄中。請在您的 config 目錄中建立 CAN_INSTALL 檔以繼續。",

"Checking whether the database schema can be updated (this can take a long time depending on the database size)" : "正在檢查是否有可更新的資料庫格式（若資料庫較大，可能需要一段時間）",

"Checked database schema update" : "已檢查資料庫格式更新",

"Checking updates of apps" : "正在檢查應用程式更新",

"Update app \"%s\" from appstore" : "更新 %s",

"Checked database schema update for apps" : "已檢查應用程式資料庫格式更新",

"Your web server is not properly set up to resolve \"{url}\". Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "您的網頁伺服器設定不正確，因此無法解析「{url}」，請至<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>瞭解更多資訊。",

"Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation page</a>. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "您的伺服器並未正確的設定解析「{url}」。這可能與伺服器的設定未更新為直接傳送此資料夾有關。請檢查 Apache 的 \".htaccess\" 檔案，或在 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">Nginx 說明文件</a>中查閱重寫規則。在 Nginx 環境中，通常是在由 \"location ~\" 開始的那行需要做調整。",

"The PHP OPcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">For better performance it is recommended</a> to use the following settings in the <code>php.ini</code>:" : "PHP 的 OPcache 功能並未被妥善設定。<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">為了有更好的效能表現</a>，我們建議在 <code>php.ini</code> 設定檔中使用以下設定：",

"Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">the documentation page about this</a>." : "資料庫的有些欄位缺少 big int 格式轉換。因為攔位格式轉換需要一些時間，所以沒有自動轉換。你可以執行 \"occ db:convert-filecache-bigin\" 手動完成轉換，轉換時 Nextcloud 服務必須處於離線狀態。詳情請參閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">關於這個文件頁面</a>。",

"To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation ↗</a>." : "若要遷移至另一個資料庫，請使用命令列工具：\"occ db:convert-type\"，或是查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件 ↗</a>。",

"MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">the documentation page about this</a>." : "您的 MySQL 資料庫並不支援 4-byte 的字元。為了能處理檔案名稱中，或是註記中的 4-byte 的字元（如表情符號等）。建議您啟用 MySQL 中支援 4-byte 的字元的功能。詳情請見<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">此文件中關於此項目的說明</a>。",

"You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">the documentation page about this</a>." : "你經由安全的連線存取系統，但系統卻生成了不安全的 URL。這很有可能是因為你使用了反向代理伺服器，但反向代理伺服器的改寫規則並未正常工作，請閱讀<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">文件</a>以修復這個問題。",

"For more details see the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "要取得進一步的資訊，請見<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>。",

"Password can not be changed. Please contact your administrator." : "無法重設密碼，請聯絡管理員。",

"Could not fetch list of apps from the app store." : "無法從應用程式商店抓取應用程式清單",

"Can't install this app because it is not compatible" : "應用程式無法安裝，因為不相容",

},"pluralForm" :"nplurals=1; plural=0;"

} \ No newline at end of file