Fix(l10n): Update translations from Transifex

Signed-off-by: Nextcloud bot <bot@nextcloud.com>

1 files changed, 8 insertions, 7 deletions

diff --git a/core/l10n/zh_TW.json b/core/l10n/zh_TW.json
index 9967aaa405a..0c89c731f92 100644
--- a/core/l10n/zh_TW.json
+++ b/core/l10n/zh_TW.json
@@ -77,12 +77,8 @@
     "Your web server is not properly set up to resolve \"{url}\". Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的網頁伺服器設定不正確，因此無法解析「{url}」。更多資訊可在{linkstart}文件 ↗{linkend}中找到。",
     "Your web server is not properly set up to resolve \"{url}\". This is most likely related to a web server configuration that was not updated to deliver this folder directly. Please compare your configuration against the shipped rewrite rules in \".htaccess\" for Apache or the provided one in the documentation for Nginx at it's {linkstart}documentation page ↗{linkend}. On Nginx those are typically the lines starting with \"location ~\" that need an update." : "您的伺服器並未正確的設定解析「{url}」。這可能與伺服器的設定未更新為直接傳送此資料夾有關。請檢查 Apache 的 \".htaccess\" 檔案，或在 Nginx 中的{linkstart}文件頁面 ↗{linkend}中查閱重寫規則。在 Nginx 環境中，通常是在由 \"location ~\" 開始的那行需要做調整。",
     "Your web server is not properly set up to deliver .woff2 files. This is typically an issue with the Nginx configuration. For Nextcloud 15 it needs an adjustement to also deliver .woff2 files. Compare your Nginx configuration to the recommended configuration in our {linkstart}documentation ↗{linkend}." : "您的伺服器並未正確的設定，因此無法傳遞 .woff2 的檔案。這通常是因為 Nginx 的設定問題所導致。在 Nextcloud 15 中，需要一些調整才能一並傳遞  .woff2 的檔案。請檢查您的 Nginx 設定，和 Nextcloud {linkstart}說明文件 ↗{linkend}中提到的建議設定。",
-    "Please make sure to set the \"overwrite.cli.url\" option in your config.php file to the URL that your users mainly use to access this Nextcloud. Suggestion: \"{suggestedOverwriteCliURL}\". Otherwise there might be problems with the URL generation via cron. (It is possible though that the suggested URL is not the URL that your users mainly use to access this Nextcloud. Best is to double check this in any case.)" : "請確定將 config.php 檔案中的 \"overwrite.cli.url\" 選項設定為您的使用者主要用於存取此 Nextcloud 的 URL。建議：\"{suggestedOverwriteCliURL}\"。否則，透過 cron 產生的 URL 可能會出現問題。（不過，建議的 URL 可能不是您的使用者主要用於存取此 Nextcloud 的 URL。最好是仔細檢查以防萬一。）",
-    "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : " 無法透過 CLI 來執行排程工作，發生以下技術性錯誤：",
-    "Last background job execution ran {relativeTime}. Something seems wrong. {linkstart}Check the background job settings ↗{linkend}." : "上次背景工作是於 {relativeTime} 前執行，似乎很久沒有執行了，有點問題。{linkstart}請檢查背景工作設定 ↗{linkend}。",
     "This is the unsupported community build of Nextcloud. Given the size of this instance, performance, reliability and scalability cannot be guaranteed. Push notifications are limited to avoid overloading our free service. Learn more about the benefits of Nextcloud Enterprise at {linkstart}https://nextcloud.com/enterprise{linkend}." : "這是不受支援的 Nextcloud 社群版建置。鑑於此站台的大小，無法保證效能、可靠程度與延展性。推播通知已被限制，以避免我們的免費服務負載過重。請至 {linkstart}nextcloud.com/enterprise{linkend} 取得更多關於 Nextcloud 企業版的資訊。",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached是用於分散式緩存的設置，但是目前安裝了錯誤的PHP模組為「memcache」。\\OC\\Memcache\\Memcached僅支援「memcached」而不是「memcache」。請參閱 {linkstart}memcached wiki了解兩種模組資訊 ↗{linkend}。",
-    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "部份檔案未通過完整性檢查。更多關於如何解決此問題的資訊可在{linkstart1}文件 ↗{linkend}中找到。（{linkstart2}無效檔案列表……{linkend} / {linkstart3}重新掃描……{linkend}）",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "無法取得 PHP 中的 \"set_time_limit\" 函式。這可能導致執行過程被終止並造成不完整安裝。我們強烈建議啟用該函式。",
     "The PHP modules \"gmp\" and/or \"bcmath\" are not enabled. If you use WebAuthn passwordless authentication, these modules are required." : "未啟用 PHP 模組「gmp」與「bcmath」。若您要使用 WebAuthn 免密碼驗證，這些模組就是必要的。",
     "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "您的 MySQL 資料庫並不支援 4-byte 的字元。為了能處理檔案名稱中，或是註記中的 4-byte 的字元（如表情符號等）。建議您啟用 MySQL 中支援 4-byte 的字元的功能。詳情請見{linkstart}此文件中關於此項目的說明 ↗{linkend}。",
@@ -335,9 +331,6 @@
     "Skip to navigation of app" : "跳到應用程式導覽",
     "Go to %s" : "前往 %s",
     "Get your own free account" : "取得免費帳號",
-    "This action requires you to confirm your password" : "這個動作需要您再次確認密碼",
-    "Confirm your password" : "確認密碼",
-    "Confirm" : "確認",
     "Connect to your account" : "連結您的帳號",
     "Please log in before granting %1$s access to your %2$s account." : "請登入後再授權「%1$s」存取您的 %2$s 帳號",
     "If you are not trying to set up a new device or app, someone is trying to trick you into granting them access to your data. In this case do not proceed and instead contact your system administrator." : "若您並未嘗試設定新裝置或應用程式，那麼某人可能正在欺騙您讓他們存取您的資料。在這種情況下，請不要繼續，請聯絡您的系統管理員。",
@@ -396,12 +389,16 @@
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的資料庫並未使用 \"READ COMMITTED\" 的交易隔離等級。當有多個行為平行進行時，這可能會造成問題。",
     "The PHP module \"fileinfo\" is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "未偵測到 PHP 模組 \"fileinfo\"。強烈建議啟用這個模組，以取得最好的 MIME 檔案類型偵測支援。",
     "Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the {linkstart}documentation ↗{linkend} for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 \"filelocking.enabled\" 以避免出現這樣的問題，請參考{linkstart}文件 ↗{linkend}來了解更多的資訊。",
+    "Please make sure to set the \"overwrite.cli.url\" option in your config.php file to the URL that your users mainly use to access this Nextcloud. Suggestion: \"{suggestedOverwriteCliURL}\". Otherwise there might be problems with the URL generation via cron. (It is possible though that the suggested URL is not the URL that your users mainly use to access this Nextcloud. Best is to double check this in any case.)" : "請確定將 config.php 檔案中的 \"overwrite.cli.url\" 選項設定為您的使用者主要用於存取此 Nextcloud 的 URL。建議：\"{suggestedOverwriteCliURL}\"。否則，透過 cron 產生的 URL 可能會出現問題。（不過，建議的 URL 可能不是您的使用者主要用於存取此 Nextcloud 的 URL。最好是仔細檢查以防萬一。）",
     "Your installation has no default phone region set. This is required to validate phone numbers in the profile settings without a country code. To allow numbers without a country code, please add \"default_phone_region\" with the respective {linkstart}ISO 3166-1 code ↗{linkend} of the region to your config file." : "你並未設定手機國際冠碼。設定後使用者在個人檔案設定手機號碼時不必再輸入國際冠碼。若要這樣做，請新增「default_phone_region」於設定檔，允許的國家及地區請參閱 {linkstart}ISO 3166-1 code ↗{linkend} 清單。",
+    "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : " 無法透過 CLI 來執行排程工作，發生以下技術性錯誤：",
+    "Last background job execution ran {relativeTime}. Something seems wrong. {linkstart}Check the background job settings ↗{linkend}." : "上次背景工作是於 {relativeTime} 前執行，似乎很久沒有執行了，有點問題。{linkstart}請檢查背景工作設定 ↗{linkend}。",
     "This server has no working internet connection: Multiple endpoints could not be reached. This means that some of the features like mounting external storage, notifications about updates or installation of third-party apps will not work. Accessing files remotely and sending of notification emails might not work, either. Establish a connection from this server to the internet to enjoy all features." : "此伺服器沒有網際網路連線（無法與多個端點取得聯繫），有些功能，像是外部儲存、應用程式更新版通知將無法運作。從遠端存取資料或是寄送電子郵件通知可能也無法運作。建議您設定好網際網路連線以使用所有功能。",
     "No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the {linkstart}documentation ↗{linkend}." : "您沒有設定記憶體快取，如果可以，請設定 memcache 來提升效能。更多資訊請查閱{linkstart}文件 ↗{linkend}。",
     "No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the {linkstart}documentation ↗{linkend}." : "PHP 無法取得合適的亂數產生源。為了安全性考量，不建議如此做。更多資訊參考{linkstart}文件 ↗{linkend}。",
     "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "您目前正執行 PHP {version} ，我們建議您升級 PHP 到您的散佈版所支援的最新版本，以取得 {linkstart}PHP 開發團隊提供的效能與安全性更新 ↗{linkend}。",
     "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "偵測到您的反向代理標頭設定不正確，但也有可能是因為您目前正透過信任的代理伺服器存取 Nextcloud。若您目前不是透過信任的代理伺服器存取 Nextcloud，這就是一個安全性問題，允許攻擊者對 Nextcloud 假冒 IP 位址。更多資訊請查閱{linkstart}文件 ↗{linkend}。",
+    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "部份檔案未通過完整性檢查。更多關於如何解決此問題的資訊可在{linkstart1}文件 ↗{linkend}中找到。（{linkstart2}無效檔案列表……{linkend} / {linkstart3}重新掃描……{linkend}）",
     "The PHP OPcache module is not properly configured. See the {linkstart}documentation ↗{linkend} for more information." : "PHP OPcache 模組設定不正確。請檢視{linkstart}說明文件 ↗{linkend}以取得更多資訊。",
     "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "您的 PHP 並未啟用 FreeType 支援，導致大頭貼產生器和設定界面無法使用。",
     "Missing index \"{indexName}\" in table \"{tableName}\"." : "在資料表 \"{tableName}\" 中，找不到索引值 \"{indexName}\" 。",
@@ -446,10 +443,14 @@
     "Copy to {folder}" : "複製到 {folder}",
     "Move to {folder}" : "移動到 {folder}",
     "Authentication required" : "必須驗證",
+    "This action requires you to confirm your password" : "這個動作需要您再次確認密碼",
+    "Confirm" : "確認",
     "Failed to authenticate, try again" : "驗證失敗，請再試一次",
     "The page could not be found on the server." : "無法在伺服器上找到此頁面。",
+    "Confirm your password" : "確認密碼",
     "App token" : "應用程式權杖",
     "Alternative log in using app token" : "使用應用程式權杖來登入",
+    "Your remote address was identified as \"{remoteAddress}\" and is brute-force throttled at the moment slowing down the performance of various requests. If the remote address is not your address this can be an indication that a proxy is not configured correctly. Further information can be found in the {linkstart}documentation ↗{linkend}." : "您的遠端地址被識別為「{remoteAddress}」，且目前正受到強力限制，導致降低了各種請求的效能。若遠端地址不是您的地址，可能代表代理伺服器設定不正確。可以在{linkstart}文件 ↗{linkend}中找到進一步的資訊。",
     "The database is used for transactional file locking. To enhance performance, please configure memcache, if available. See the {linkstart}documentation ↗{linkend} for more information." : "資料庫用於交易檔案鎖定。要強化效能，請設定 memcache（若可用）。請見{linkstart}文件 ↗{linkend}。",
     "PHP 8.0 is now deprecated in Nextcloud 27. Nextcloud 28 may require at least PHP 8.1. Please upgrade to {linkstart}one of the officially supported PHP versions provided by the PHP Group ↗{linkend} as soon as possible." : "Nextcloud 27 已棄用 PHP 8.0。Nextcloud 28 需要 PHP 8.1 或更新版本。請盡快升級至 {linkstart}PHP Group ↗{linkend}提供官方支援的其中一個版本。",
     "Avatar of {fullName}" : "{fullName} 的大頭照"