[tx-robot] updated from transifex

54 files changed, 102 insertions, 146 deletions

diff --git a/core/l10n/cs.js b/core/l10n/cs.js
index cd82b6afb96..fb758baf9b7 100644
--- a/core/l10n/cs.js
+++ b/core/l10n/cs.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Konfigurace hlaviček reverzní proxy není správná nebo přistupujete na Nextcloud z důvěryhodné proxy. Pokud nepřistupujete k Nextcloud z důvěryhodné proxy, potom je toto bezpečností chyba a může útočníkovi umožnit falšovat IP adresu, kterou ownCloud vidí. Další informace lze nalézt v naší <a target=\"_blank\" href=\"{docLink}\">dokumentaci</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Je nakonfigurován memcached jako distribuovaná cache, ale je nainstalovaný nesprávný PHP modul \"memcache\". \\OC\\Memcache\\Memcached podporuje pouze \"memcached\" a ne \"memcache\". Podívejte se na <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki o obou modulech</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Některé soubory neprošly kontrolou integrity. Více informací o tom jak tento problém vyřešit, lze nalézt v naší <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentaci</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Seznam neplatných souborů…</a> / <a href=\"{rescanEndpoint}\">Znovu ověřit…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache není správně nakonfigurována. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pro lepší výkon doporučujeme ↗</a> použít následující nastavení v <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP funkce \"set_time_limit\" není dostupná. To může způsobit ukončení skriptů uprostřed provádění a další problémy s instalací. Doporučujeme tuto funkc povolit.",
     "Error occurred while checking server setup" : "Při ověřování nastavení serveru došlo k chybě",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Váš datový adresář a vaše soubory jsou pravděpodobně dostupné z internetu. Soubor .htaccess nefunguje. Je velmi doporučeno zajistit, aby tento adresář již nebyl dostupný z internetu, nebo byl přesunut mimo document root webového serveru.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Konec platnosti",
     "Expiration date" : "Datum vypršení platnosti",
     "Choose a password for the public link" : "Zadej heslo pro tento veřejný odkaz",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Zvolte si heslo veřejného sdílení nebo stiskněte \"Enter ↵\"",
     "Copied!" : "Zkopírováno!",
     "Copy" : "Zkopírovat",
     "Not supported!" : "Nepodporováno!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Ať slouží!",
     "Use the following link to reset your password: {link}" : "Heslo obnovíte použitím následujícího odkazu: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Ahoj,<br><br>jen ti dávám vědět, že s tebou %s sdílí <strong>%s</strong>.<br><a href=\"%s\">Zkontroluj to!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Prosím použijte aktualizační příkazový řádek, protože máte velkou instanci."
+    "Please use the command line updater because you have a big instance." : "Prosím použijte aktualizační příkazový řádek, protože máte velkou instanci.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache není správně nakonfigurována. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pro lepší výkon doporučujeme ↗</a> použít následující nastavení v <code>php.ini</code>:"
 },
 "nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;");
diff --git a/core/l10n/cs.json b/core/l10n/cs.json
index 7f270cb7e6c..4bdd471a9b3 100644
--- a/core/l10n/cs.json
+++ b/core/l10n/cs.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Konfigurace hlaviček reverzní proxy není správná nebo přistupujete na Nextcloud z důvěryhodné proxy. Pokud nepřistupujete k Nextcloud z důvěryhodné proxy, potom je toto bezpečností chyba a může útočníkovi umožnit falšovat IP adresu, kterou ownCloud vidí. Další informace lze nalézt v naší <a target=\"_blank\" href=\"{docLink}\">dokumentaci</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Je nakonfigurován memcached jako distribuovaná cache, ale je nainstalovaný nesprávný PHP modul \"memcache\". \\OC\\Memcache\\Memcached podporuje pouze \"memcached\" a ne \"memcache\". Podívejte se na <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki o obou modulech</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Některé soubory neprošly kontrolou integrity. Více informací o tom jak tento problém vyřešit, lze nalézt v naší <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentaci</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Seznam neplatných souborů…</a> / <a href=\"{rescanEndpoint}\">Znovu ověřit…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache není správně nakonfigurována. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pro lepší výkon doporučujeme ↗</a> použít následující nastavení v <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP funkce \"set_time_limit\" není dostupná. To může způsobit ukončení skriptů uprostřed provádění a další problémy s instalací. Doporučujeme tuto funkc povolit.",
     "Error occurred while checking server setup" : "Při ověřování nastavení serveru došlo k chybě",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Váš datový adresář a vaše soubory jsou pravděpodobně dostupné z internetu. Soubor .htaccess nefunguje. Je velmi doporučeno zajistit, aby tento adresář již nebyl dostupný z internetu, nebo byl přesunut mimo document root webového serveru.",
@@ -125,7 +124,6 @@
     "Expiration" : "Konec platnosti",
     "Expiration date" : "Datum vypršení platnosti",
     "Choose a password for the public link" : "Zadej heslo pro tento veřejný odkaz",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Zvolte si heslo veřejného sdílení nebo stiskněte \"Enter ↵\"",
     "Copied!" : "Zkopírováno!",
     "Copy" : "Zkopírovat",
     "Not supported!" : "Nepodporováno!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Ať slouží!",
     "Use the following link to reset your password: {link}" : "Heslo obnovíte použitím následujícího odkazu: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Ahoj,<br><br>jen ti dávám vědět, že s tebou %s sdílí <strong>%s</strong>.<br><a href=\"%s\">Zkontroluj to!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Prosím použijte aktualizační příkazový řádek, protože máte velkou instanci."
+    "Please use the command line updater because you have a big instance." : "Prosím použijte aktualizační příkazový řádek, protože máte velkou instanci.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache není správně nakonfigurována. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pro lepší výkon doporučujeme ↗</a> použít následující nastavení v <code>php.ini</code>:"
 },"pluralForm" :"nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;"
 }
\ No newline at end of file
diff --git a/core/l10n/da.js b/core/l10n/da.js
index 6c3916616d1..610d1e45728 100644
--- a/core/l10n/da.js
+++ b/core/l10n/da.js
@@ -123,7 +123,6 @@ OC.L10N.register(
     "Expiration" : "Udløb",
     "Expiration date" : "Udløbsdato",
     "Choose a password for the public link" : "Vælg et kodeord til det offentlige link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Beskyt dit offentlige link med en adgangskode eller tryk på \"Enter ↵\"",
     "Copied!" : "Kopirét!",
     "Copy" : "Kopiér",
     "Not supported!" : "Ikke understøttet!",
diff --git a/core/l10n/da.json b/core/l10n/da.json
index 77a1bd95dfb..7dc524cbc83 100644
--- a/core/l10n/da.json
+++ b/core/l10n/da.json
@@ -121,7 +121,6 @@
     "Expiration" : "Udløb",
     "Expiration date" : "Udløbsdato",
     "Choose a password for the public link" : "Vælg et kodeord til det offentlige link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Beskyt dit offentlige link med en adgangskode eller tryk på \"Enter ↵\"",
     "Copied!" : "Kopirét!",
     "Copy" : "Kopiér",
     "Not supported!" : "Ikke understøttet!",
diff --git a/core/l10n/de.js b/core/l10n/de.js
index 70df8786ae8..55d27ae54b6 100644
--- a/core/l10n/de.js
+++ b/core/l10n/de.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Die Reverse-Proxy-Header-Konfiguration ist fehlerhaft oder Du greist auf Nextcloud über einen vertrauenswürdigen Proxy zu. Wenn Du auf Nextcloud nicht über einen vertrauenswürdigen Proxy zugreifst, dann besteht ein Sicherheitsproblem, das einem Angreifer erlaubt die IP-Adresse, die für Nextcloud sichtbar ist, auszuspähen. Weitere Informationen hierzu findest Du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached ist als verteilter Cache konfiguriert, aber das falsche PHP-Modul \"memcache\" ist installiert. \\OC\\Memcache\\Memcached unterstützt nur \"memcached\" jedoch nicht \"memcache\". Im <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki nach beiden Modulen suchen</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Einige Dateien haben die Integritätsprüfung nicht bestanden. Weiterführende Information findest Du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste der ungültigen Dateien…</a> / <a href=\"{rescanEndpoint}\">Erneut analysieren…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Die PHP-Funktion \"set_time_limit\" ist nicht verfügbar. Dies kann in angehaltenen Scripten oder einer abgebrochenen Installation resultieren. Wir empfehlen dringend, diese Funtkion zu aktivieren.",
     "Error occurred while checking server setup" : "Fehler beim Überprüfen der Servereinrichtung",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Dein Datenverzeichnis und deine Dateien sind wahrscheinlich vom Internet aus erreichbar. Die .htaccess-Datei funktioniert nicht. Es wird dringend empfohlen, deinen Webserver dahingehend zu konfigurieren, dass das Datenverzeichnis nicht mehr vom Internet aus erreichbar ist oder dass du es aus dem Dokument-Root-Verzeichnis des Webservers bewegst.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Ablaufdatum",
     "Expiration date" : "Ablaufdatum",
     "Choose a password for the public link" : "Wähle ein Passwort für den öffentlichen Link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Wähle ein Passwort für die öffentliche Freigabe oder drücke \"Return 
\"",
     "Copied!" : "Kopiert!",
     "Copy" : "Kopieren",
     "Not supported!" : "Nicht unterstützt!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Noch einen schönen Tag!",
     "Use the following link to reset your password: {link}" : "Verwende den folgenden Link, um Dein Passwort zurückzusetzen: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass %s <strong>%s</strong> mit Dir geteilt hat.<br><a href=\"%s\">Sieh es Dir an!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Da Du eine große Instanz nutzt, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen."
+    "Please use the command line updater because you have a big instance." : "Da Du eine große Instanz nutzt, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/de.json b/core/l10n/de.json
index b60a4a8feed..16471715abe 100644
--- a/core/l10n/de.json
+++ b/core/l10n/de.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Die Reverse-Proxy-Header-Konfiguration ist fehlerhaft oder Du greist auf Nextcloud über einen vertrauenswürdigen Proxy zu. Wenn Du auf Nextcloud nicht über einen vertrauenswürdigen Proxy zugreifst, dann besteht ein Sicherheitsproblem, das einem Angreifer erlaubt die IP-Adresse, die für Nextcloud sichtbar ist, auszuspähen. Weitere Informationen hierzu findest Du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached ist als verteilter Cache konfiguriert, aber das falsche PHP-Modul \"memcache\" ist installiert. \\OC\\Memcache\\Memcached unterstützt nur \"memcached\" jedoch nicht \"memcache\". Im <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki nach beiden Modulen suchen</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Einige Dateien haben die Integritätsprüfung nicht bestanden. Weiterführende Information findest Du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste der ungültigen Dateien…</a> / <a href=\"{rescanEndpoint}\">Erneut analysieren…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Die PHP-Funktion \"set_time_limit\" ist nicht verfügbar. Dies kann in angehaltenen Scripten oder einer abgebrochenen Installation resultieren. Wir empfehlen dringend, diese Funtkion zu aktivieren.",
     "Error occurred while checking server setup" : "Fehler beim Überprüfen der Servereinrichtung",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Dein Datenverzeichnis und deine Dateien sind wahrscheinlich vom Internet aus erreichbar. Die .htaccess-Datei funktioniert nicht. Es wird dringend empfohlen, deinen Webserver dahingehend zu konfigurieren, dass das Datenverzeichnis nicht mehr vom Internet aus erreichbar ist oder dass du es aus dem Dokument-Root-Verzeichnis des Webservers bewegst.",
@@ -125,7 +124,6 @@
     "Expiration" : "Ablaufdatum",
     "Expiration date" : "Ablaufdatum",
     "Choose a password for the public link" : "Wähle ein Passwort für den öffentlichen Link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Wähle ein Passwort für die öffentliche Freigabe oder drücke \"Return 
\"",
     "Copied!" : "Kopiert!",
     "Copy" : "Kopieren",
     "Not supported!" : "Nicht unterstützt!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Noch einen schönen Tag!",
     "Use the following link to reset your password: {link}" : "Verwende den folgenden Link, um Dein Passwort zurückzusetzen: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass %s <strong>%s</strong> mit Dir geteilt hat.<br><a href=\"%s\">Sieh es Dir an!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Da Du eine große Instanz nutzt, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen."
+    "Please use the command line updater because you have a big instance." : "Da Du eine große Instanz nutzt, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/de_DE.js b/core/l10n/de_DE.js
index 3b2cf2dc34a..2e728c8967f 100644
--- a/core/l10n/de_DE.js
+++ b/core/l10n/de_DE.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Die Reverse-Proxy-Header-Konfiguration ist fehlerhaft oder Sie greifen auf Nextcloud über einen vertrauenswürdigen Proxy zu. Wenn Sie auf Nextcloud nicht über einen vertrauenswürdigen Proxy zugreifen, dann besteht ein Sicherheitsproblem, das einem Angreifer erlaubt die IP-Adresse, die für Nextcloud sichtbar ist, auszuspähen. Weitere Informationen hierzu finden Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached ist als verteilter Cache konfiguriert, aber das falsche PHP Modul \"memcache\" ist installiert. \\OC\\Memcache\\Memcached unterstützt nur \"memcached\" jedoch nicht \"memcache\". Im <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki nach beiden Modulen suchen</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Einige Dateien haben die Integritätsprüfung nicht bestanden. Weiterführende Information findest Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste der ungültigen Dateien …</a> / <a href=\"{rescanEndpoint}\">Erneut analysieren…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Die PHP-Funktion \"set_time_limit\" ist nicht verfügbar. Dies kann in angehaltenen Scripten oder einer abgebrochenen Installation resultieren. Wir empfehlen dringend, diese Funtkion zu aktivieren.",
     "Error occurred while checking server setup" : "Fehler beim Überprüfen der Servereinrichtung",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Ihr Datenverzeichnis und Ihre Dateien sind wahrscheinlich vom Internet aus erreichbar. Die .htaccess-Datei funktioniert nicht. Es wird dringend empfohlen, Ihren Webserver dahingehend zu konfigurieren, dass das Datenverzeichnis nicht mehr vom Internet aus erreichbar ist oder dass Sie es aus dem Document-Root-Verzeichnis des Webservers herausverschieben.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Ablauf",
     "Expiration date" : "Ablaufdatum",
     "Choose a password for the public link" : "Wählen Sie ein Passwort für den öffentlichen Link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Wählen Sie ein Passwort für die öffentliche Freigabe oder drücken Sie  \"Return 
\"
",
     "Copied!" : "Kopiert!",
     "Copy" : "Kopieren",
     "Not supported!" : "Nicht unterstützt!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Noch einen schönen Tag!",
     "Use the following link to reset your password: {link}" : "Benutzen Sie den folgenden Link, um Ihr Passwort zurückzusetzen: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass %s <strong>%s</strong> mit Ihnen geteilt hat.<br><a href=\"%s\">Sehen Sie es sich an!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Da Sie eine große Instanz von Nextcloud besitzen, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen."
+    "Please use the command line updater because you have a big instance." : "Da Sie eine große Instanz von Nextcloud besitzen, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/de_DE.json b/core/l10n/de_DE.json
index ab6e9afd3f6..b543ef265cc 100644
--- a/core/l10n/de_DE.json
+++ b/core/l10n/de_DE.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Die Reverse-Proxy-Header-Konfiguration ist fehlerhaft oder Sie greifen auf Nextcloud über einen vertrauenswürdigen Proxy zu. Wenn Sie auf Nextcloud nicht über einen vertrauenswürdigen Proxy zugreifen, dann besteht ein Sicherheitsproblem, das einem Angreifer erlaubt die IP-Adresse, die für Nextcloud sichtbar ist, auszuspähen. Weitere Informationen hierzu finden Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached ist als verteilter Cache konfiguriert, aber das falsche PHP Modul \"memcache\" ist installiert. \\OC\\Memcache\\Memcached unterstützt nur \"memcached\" jedoch nicht \"memcache\". Im <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki nach beiden Modulen suchen</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Einige Dateien haben die Integritätsprüfung nicht bestanden. Weiterführende Information findest Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dokumentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste der ungültigen Dateien …</a> / <a href=\"{rescanEndpoint}\">Erneut analysieren…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Die PHP-Funktion \"set_time_limit\" ist nicht verfügbar. Dies kann in angehaltenen Scripten oder einer abgebrochenen Installation resultieren. Wir empfehlen dringend, diese Funtkion zu aktivieren.",
     "Error occurred while checking server setup" : "Fehler beim Überprüfen der Servereinrichtung",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Ihr Datenverzeichnis und Ihre Dateien sind wahrscheinlich vom Internet aus erreichbar. Die .htaccess-Datei funktioniert nicht. Es wird dringend empfohlen, Ihren Webserver dahingehend zu konfigurieren, dass das Datenverzeichnis nicht mehr vom Internet aus erreichbar ist oder dass Sie es aus dem Document-Root-Verzeichnis des Webservers herausverschieben.",
@@ -125,7 +124,6 @@
     "Expiration" : "Ablauf",
     "Expiration date" : "Ablaufdatum",
     "Choose a password for the public link" : "Wählen Sie ein Passwort für den öffentlichen Link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Wählen Sie ein Passwort für die öffentliche Freigabe oder drücken Sie  \"Return 
\"
",
     "Copied!" : "Kopiert!",
     "Copy" : "Kopieren",
     "Not supported!" : "Nicht unterstützt!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Noch einen schönen Tag!",
     "Use the following link to reset your password: {link}" : "Benutzen Sie den folgenden Link, um Ihr Passwort zurückzusetzen: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass %s <strong>%s</strong> mit Ihnen geteilt hat.<br><a href=\"%s\">Sehen Sie es sich an!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Da Sie eine große Instanz von Nextcloud besitzen, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen."
+    "Please use the command line updater because you have a big instance." : "Da Sie eine große Instanz von Nextcloud besitzen, wird die Benutzung des Aktualisierungsprogrammes über die Kommandozeile empfohlen.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache ist nicht korrekt eingerichtet. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Für bessere Leistung empfehlen wir </a> folgende Einstellungen in der <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/el.js b/core/l10n/el.js
index 531205b0b2a..8789d21505f 100644
--- a/core/l10n/el.js
+++ b/core/l10n/el.js
@@ -111,7 +111,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Η διαμόρφωση των reverse proxy headers είναι εσφαλμένη, ή έχετε πρόσβαση στο Nextcloud από έναν αξιόπιστο διαμεσολαβητή. Εάν δεν έχετε πρόσβαση στο Nextcloud από έναν αξιόπιστο διαμεσολαβητή, αυτό είναι ένα ζήτημα ασφαλείας και μπορείτε να επιτρέψετε σε κάποιον εισβολέα να παρουσιάσει την διεύθυνση IP του παραπλανητικά ως ορατή στο Nextcloud. Περισσότερες πληροφορίες μπορείτε να βρείτε στην <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">τεκμηρίωση</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Το Memcached είναι ρυθμισμένο ως κατανεμημένη λανθάνουσα μνήμη, αλλά είναι εγκατεστημένη το λάθος άρθρωμα \"memcache\" της PHP. Το \\OC\\Memcache\\Memcached υποστηρίζει μόνο τη \"memcached\" και όχι τη \"memcache\". Δείτε το <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki και για τα δύο αρθρώματα</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Μερικά αρχεία δεν πέρασαν από τον έλεγχο της ακεραιότητας. Περισσότερες πληροφορίες για το πως να επιλύσετε πρόβλημα μπορείτε να βρείτε στην <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">τεκμηρίωση</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Λίστα από μή έγκυρα αρχεία…</a> / <a href=\"{rescanEndpoint}\">Σάρωση ξανά…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Η PHP Opcache δεν είναι ρυθμισμένη σωστά. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\"Για καλύτερη απόδοση σας συνιστούμε ↗</a> να χρησιμοποιήσετε τις ακόλουθες ρυθμίσεις στο αρχείο <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Μη διαθέσιμη η λειτουργία της PHP \"set_time_limit\". Αυτό μπορεί να διακόψει την εκτέλεση των διαφόρων scripts με αποτέλεσμα να διακοπεί η εγκατάστασή σας. Σας συνιστούμε να ενεργοποιήσετε αυτή τη λειτουργία.",
     "Error occurred while checking server setup" : "Παρουσιάστηκε σφάλμα κατά τον έλεγχο των ρυθμίσεων του διακομιστή σας",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Ο κατάλογος δεδομένων και τα αρχεία σας είναι πιθανόν προσβάσιμα από το διαδίκτυο. Το αρχείο .htaccess δεν λειτουργεί. Σας προτείνουμε να ρυθμίσετε το διακομιστή σας με τέτοιο τρόπο ώστε ο κατάλογος δεδομένων να μην είναι πλέον προσβάσιμος ή να μετακινήσετε τον κατάλογο δεδομένων εκτός του ριζικού καταλόγου εγγράφων του διακομιστή.",
@@ -126,7 +125,6 @@ OC.L10N.register(
     "Expiration" : "Λήξη",
     "Expiration date" : "Ημερομηνία λήξης",
     "Choose a password for the public link" : "Επιλέξτε συνθηματικό για τον δημόσιο σύνδεσμο",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Επιλέξτε συνθηματικό για τον δημόσιο σύνδεσμο ή πατήστε \"Enter ↵\"",
     "Copied!" : "Αντιγράφτηκε!",
     "Copy" : "Αντιγραφή",
     "Not supported!" : "Δεν υποστηρίζεται!",
@@ -336,6 +334,7 @@ OC.L10N.register(
     "Cheers!" : "Με εκτίμηση!",
     "Use the following link to reset your password: {link}" : "Χρησιμοποιήστε τον ακόλουθο σύνδεσμο για να επαναφέρετε το συνθηματικό: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Γεια χαρά,<br><br>απλά σας ενημερώνω πως ο %s μοιράστηκε το<strong>%s</strong> με εσάς.<br><a href=\"%s\">Δείτε το!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Παρακαλούμε χρησιμοποιήστε την ενημέρωση μέσω γραμμής εντολών διότι έχετε μεγάλη εγκατάσταση."
+    "Please use the command line updater because you have a big instance." : "Παρακαλούμε χρησιμοποιήστε την ενημέρωση μέσω γραμμής εντολών διότι έχετε μεγάλη εγκατάσταση.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Η PHP Opcache δεν είναι ρυθμισμένη σωστά. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\"Για καλύτερη απόδοση σας συνιστούμε ↗</a> να χρησιμοποιήσετε τις ακόλουθες ρυθμίσεις στο αρχείο <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/el.json b/core/l10n/el.json
index 30c4dec94c8..f153ef6c1b6 100644
--- a/core/l10n/el.json
+++ b/core/l10n/el.json
@@ -109,7 +109,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Η διαμόρφωση των reverse proxy headers είναι εσφαλμένη, ή έχετε πρόσβαση στο Nextcloud από έναν αξιόπιστο διαμεσολαβητή. Εάν δεν έχετε πρόσβαση στο Nextcloud από έναν αξιόπιστο διαμεσολαβητή, αυτό είναι ένα ζήτημα ασφαλείας και μπορείτε να επιτρέψετε σε κάποιον εισβολέα να παρουσιάσει την διεύθυνση IP του παραπλανητικά ως ορατή στο Nextcloud. Περισσότερες πληροφορίες μπορείτε να βρείτε στην <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">τεκμηρίωση</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Το Memcached είναι ρυθμισμένο ως κατανεμημένη λανθάνουσα μνήμη, αλλά είναι εγκατεστημένη το λάθος άρθρωμα \"memcache\" της PHP. Το \\OC\\Memcache\\Memcached υποστηρίζει μόνο τη \"memcached\" και όχι τη \"memcache\". Δείτε το <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki και για τα δύο αρθρώματα</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Μερικά αρχεία δεν πέρασαν από τον έλεγχο της ακεραιότητας. Περισσότερες πληροφορίες για το πως να επιλύσετε πρόβλημα μπορείτε να βρείτε στην <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">τεκμηρίωση</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Λίστα από μή έγκυρα αρχεία…</a> / <a href=\"{rescanEndpoint}\">Σάρωση ξανά…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Η PHP Opcache δεν είναι ρυθμισμένη σωστά. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\"Για καλύτερη απόδοση σας συνιστούμε ↗</a> να χρησιμοποιήσετε τις ακόλουθες ρυθμίσεις στο αρχείο <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Μη διαθέσιμη η λειτουργία της PHP \"set_time_limit\". Αυτό μπορεί να διακόψει την εκτέλεση των διαφόρων scripts με αποτέλεσμα να διακοπεί η εγκατάστασή σας. Σας συνιστούμε να ενεργοποιήσετε αυτή τη λειτουργία.",
     "Error occurred while checking server setup" : "Παρουσιάστηκε σφάλμα κατά τον έλεγχο των ρυθμίσεων του διακομιστή σας",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Ο κατάλογος δεδομένων και τα αρχεία σας είναι πιθανόν προσβάσιμα από το διαδίκτυο. Το αρχείο .htaccess δεν λειτουργεί. Σας προτείνουμε να ρυθμίσετε το διακομιστή σας με τέτοιο τρόπο ώστε ο κατάλογος δεδομένων να μην είναι πλέον προσβάσιμος ή να μετακινήσετε τον κατάλογο δεδομένων εκτός του ριζικού καταλόγου εγγράφων του διακομιστή.",
@@ -124,7 +123,6 @@
     "Expiration" : "Λήξη",
     "Expiration date" : "Ημερομηνία λήξης",
     "Choose a password for the public link" : "Επιλέξτε συνθηματικό για τον δημόσιο σύνδεσμο",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Επιλέξτε συνθηματικό για τον δημόσιο σύνδεσμο ή πατήστε \"Enter ↵\"",
     "Copied!" : "Αντιγράφτηκε!",
     "Copy" : "Αντιγραφή",
     "Not supported!" : "Δεν υποστηρίζεται!",
@@ -334,6 +332,7 @@
     "Cheers!" : "Με εκτίμηση!",
     "Use the following link to reset your password: {link}" : "Χρησιμοποιήστε τον ακόλουθο σύνδεσμο για να επαναφέρετε το συνθηματικό: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Γεια χαρά,<br><br>απλά σας ενημερώνω πως ο %s μοιράστηκε το<strong>%s</strong> με εσάς.<br><a href=\"%s\">Δείτε το!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Παρακαλούμε χρησιμοποιήστε την ενημέρωση μέσω γραμμής εντολών διότι έχετε μεγάλη εγκατάσταση."
+    "Please use the command line updater because you have a big instance." : "Παρακαλούμε χρησιμοποιήστε την ενημέρωση μέσω γραμμής εντολών διότι έχετε μεγάλη εγκατάσταση.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Η PHP Opcache δεν είναι ρυθμισμένη σωστά. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\"Για καλύτερη απόδοση σας συνιστούμε ↗</a> να χρησιμοποιήσετε τις ακόλουθες ρυθμίσεις στο αρχείο <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/en_GB.js b/core/l10n/en_GB.js
index 51c2264d1af..ba3f30172f8 100644
--- a/core/l10n/en_GB.js
+++ b/core/l10n/en_GB.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function.",
     "Error occurred while checking server setup" : "Error occurred whilst checking server setup",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Expiration",
     "Expiration date" : "Expiration date",
     "Choose a password for the public link" : "Choose a password for the public link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Choose a password for the public link or press \"Enter 
\"",
     "Copied!" : "Copied!",
     "Copy" : "Copy",
     "Not supported!" : "Not supported!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Cheers!",
     "Use the following link to reset your password: {link}" : "Use the following link to reset your password: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Please use the command line updater because you have a big instance."
+    "Please use the command line updater because you have a big instance." : "Please use the command line updater because you have a big instance.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/en_GB.json b/core/l10n/en_GB.json
index 2e34c322d78..ba0dfeec9ae 100644
--- a/core/l10n/en_GB.json
+++ b/core/l10n/en_GB.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function.",
     "Error occurred while checking server setup" : "Error occurred whilst checking server setup",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root.",
@@ -125,7 +124,6 @@
     "Expiration" : "Expiration",
     "Expiration date" : "Expiration date",
     "Choose a password for the public link" : "Choose a password for the public link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Choose a password for the public link or press \"Enter 
\"",
     "Copied!" : "Copied!",
     "Copy" : "Copy",
     "Not supported!" : "Not supported!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Cheers!",
     "Use the following link to reset your password: {link}" : "Use the following link to reset your password: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Please use the command line updater because you have a big instance."
+    "Please use the command line updater because you have a big instance." : "Please use the command line updater because you have a big instance.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/es.js b/core/l10n/es.js
index 9c380f2d122..aecd0fc78d1 100644
--- a/core/l10n/es.js
+++ b/core/l10n/es.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuración de encabezados del proxy reverso es incorrecta, o usted está accediendo a Nextcloud desde un proxy en el que confía. Si no está accediendo a Nextcloud desde un proxy fiable, esto es un problema de seguridad y puede permitir a un atacante dsfrazar su dirección IP como visible para Nextcloud. Se puede encontrar más información en nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentción</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "memcached es un sistema de cache distribuido. pero ha sido instalado por error el modulo PHP memcache.\nConsulte  <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki acerca de ambos modulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Algunos archivos no han superado la comprobación de integridad. Para más información sobre cómo resolver este inconveniente consulte nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista de archivos inválidos…</a> / <a href=\"{rescanEndpoint}\">Volver a escanear…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "El código Opcache de PHP no esta configurado correctamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para mejor desempeño recomendamos ↗</a> para usar las siguiente opciones en el  <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La función PHP \"set_limit_time\" no esta disponible. Esto podría resultar en el script siendo terminado a la mitad de la ejecución, rompiendo la instalación. Le sugerimos considerablemente que active esta función.",
     "Error occurred while checking server setup" : "Ha ocurrido un error al revisar la configuración del servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Tu directorio de datos y tus archivos son probablemente accesibles desde internet. El archivo .htaccess no funciona. Se recomienda encarecidamente que configures tu servidor web de tal manera que el directorio de datos no sea accesible o que muevas el directorio de datos fuera de la raíz de documentos del servidor web.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Expira en:",
     "Expiration date" : "Fecha de caducidad",
     "Choose a password for the public link" : "Elija una contraseña para el enlace publico",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Elija una contraseña para el enlace público o presione \"Enter ↵\"",
     "Copied!" : "¡Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "¡No se puede!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "¡Saludos!",
     "Use the following link to reset your password: {link}" : "Utilice el siguiente enlace para restablecer su contraseña: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hola:<br><br>Te comentamos que %s compartió <strong>%s</strong> contigo.<br><a href=\"%s\">¡Échale un vistazo!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Por favor utilice la actualización mediante la linea de comandos porque tiene pendiente una gran actualización."
+    "Please use the command line updater because you have a big instance." : "Por favor utilice la actualización mediante la linea de comandos porque tiene pendiente una gran actualización.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "El código Opcache de PHP no esta configurado correctamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para mejor desempeño recomendamos ↗</a> para usar las siguiente opciones en el  <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/es.json b/core/l10n/es.json
index ab941dcf215..dd14ec16004 100644
--- a/core/l10n/es.json
+++ b/core/l10n/es.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuración de encabezados del proxy reverso es incorrecta, o usted está accediendo a Nextcloud desde un proxy en el que confía. Si no está accediendo a Nextcloud desde un proxy fiable, esto es un problema de seguridad y puede permitir a un atacante dsfrazar su dirección IP como visible para Nextcloud. Se puede encontrar más información en nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentción</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "memcached es un sistema de cache distribuido. pero ha sido instalado por error el modulo PHP memcache.\nConsulte  <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki acerca de ambos modulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Algunos archivos no han superado la comprobación de integridad. Para más información sobre cómo resolver este inconveniente consulte nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista de archivos inválidos…</a> / <a href=\"{rescanEndpoint}\">Volver a escanear…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "El código Opcache de PHP no esta configurado correctamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para mejor desempeño recomendamos ↗</a> para usar las siguiente opciones en el  <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La función PHP \"set_limit_time\" no esta disponible. Esto podría resultar en el script siendo terminado a la mitad de la ejecución, rompiendo la instalación. Le sugerimos considerablemente que active esta función.",
     "Error occurred while checking server setup" : "Ha ocurrido un error al revisar la configuración del servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Tu directorio de datos y tus archivos son probablemente accesibles desde internet. El archivo .htaccess no funciona. Se recomienda encarecidamente que configures tu servidor web de tal manera que el directorio de datos no sea accesible o que muevas el directorio de datos fuera de la raíz de documentos del servidor web.",
@@ -125,7 +124,6 @@
     "Expiration" : "Expira en:",
     "Expiration date" : "Fecha de caducidad",
     "Choose a password for the public link" : "Elija una contraseña para el enlace publico",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Elija una contraseña para el enlace público o presione \"Enter ↵\"",
     "Copied!" : "¡Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "¡No se puede!",
@@ -337,6 +335,7 @@
     "Cheers!" : "¡Saludos!",
     "Use the following link to reset your password: {link}" : "Utilice el siguiente enlace para restablecer su contraseña: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hola:<br><br>Te comentamos que %s compartió <strong>%s</strong> contigo.<br><a href=\"%s\">¡Échale un vistazo!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Por favor utilice la actualización mediante la linea de comandos porque tiene pendiente una gran actualización."
+    "Please use the command line updater because you have a big instance." : "Por favor utilice la actualización mediante la linea de comandos porque tiene pendiente una gran actualización.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "El código Opcache de PHP no esta configurado correctamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para mejor desempeño recomendamos ↗</a> para usar las siguiente opciones en el  <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/es_AR.js b/core/l10n/es_AR.js
index c6cff50bd58..b8cad4b40e9 100644
--- a/core/l10n/es_AR.js
+++ b/core/l10n/es_AR.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuración de los encabezados del proxy inverso es incorrecta, o está accediendo a Nextcloud desde un proxy de confianza. Si no esta accediendo a Nextcloud desde un proxy de confianza, se trata de un tema de seguridad y le puede permitir a un atacante hacer a su dirección IP apócrifa visible para Nextcloud. Puede encontar más infomración en nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurado como un caché distribuido, pero el módulo equivocado PHP \"memcache\" está instalado. \\OC\\Memcache\\Memcached sólo soporta \"memchached\" y no \"memchache\". Favor de ver el <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki de ambos módulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Algunos archivos no pasaron la verificación de integridad. Para mayor información de cómo resolver este tema consulte nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listado de archivos inválidos …</a> / <a href=\"{rescanEndpoint}\">Volver a escanear…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La fución PHP \"set_time_limit\" no está disponible. Esto podría generar scripts que se interrumpan a media ejecución, rompiendo la instalación. Le recomendamos ámpliamente habilitar esta función.",
     "Error occurred while checking server setup" : "Se presentó un error al verificar la configuración del servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Posiblemente sus archivos y directorio de datos sean accesibles desde Internet. El archivo .htaccess no está funcionando. Le recomendamos ámpliamente que configure su servidor web de tal modo que el directorio de datos no sea accesible o que mueva el directorio de datos fuera de la raíz de documentos del servidor web. ",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Expiración",
     "Expiration date" : "Fecha de expiración",
     "Choose a password for the public link" : "Seleccione una contraseña para el link público",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Favor de elegir una contraseña para el link público o presione  \"Intro 
\"",
     "Copied!" : "¡Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "¡No está soportado!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "¡Saludos!",
     "Use the following link to reset your password: {link}" : "Use el siguiente link para restablecer su contraseña: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hola,<br><br> sólo queremos informarle que %s ha compartido <strong>%s</strong> con usted. <br><a href=\"%s\">¡Véalo!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. "
+    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. ",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/es_AR.json b/core/l10n/es_AR.json
index 492e1b13cb0..e80738e4d59 100644
--- a/core/l10n/es_AR.json
+++ b/core/l10n/es_AR.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuración de los encabezados del proxy inverso es incorrecta, o está accediendo a Nextcloud desde un proxy de confianza. Si no esta accediendo a Nextcloud desde un proxy de confianza, se trata de un tema de seguridad y le puede permitir a un atacante hacer a su dirección IP apócrifa visible para Nextcloud. Puede encontar más infomración en nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurado como un caché distribuido, pero el módulo equivocado PHP \"memcache\" está instalado. \\OC\\Memcache\\Memcached sólo soporta \"memchached\" y no \"memchache\". Favor de ver el <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki de ambos módulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Algunos archivos no pasaron la verificación de integridad. Para mayor información de cómo resolver este tema consulte nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listado de archivos inválidos …</a> / <a href=\"{rescanEndpoint}\">Volver a escanear…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La fución PHP \"set_time_limit\" no está disponible. Esto podría generar scripts que se interrumpan a media ejecución, rompiendo la instalación. Le recomendamos ámpliamente habilitar esta función.",
     "Error occurred while checking server setup" : "Se presentó un error al verificar la configuración del servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Posiblemente sus archivos y directorio de datos sean accesibles desde Internet. El archivo .htaccess no está funcionando. Le recomendamos ámpliamente que configure su servidor web de tal modo que el directorio de datos no sea accesible o que mueva el directorio de datos fuera de la raíz de documentos del servidor web. ",
@@ -125,7 +124,6 @@
     "Expiration" : "Expiración",
     "Expiration date" : "Fecha de expiración",
     "Choose a password for the public link" : "Seleccione una contraseña para el link público",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Favor de elegir una contraseña para el link público o presione  \"Intro 
\"",
     "Copied!" : "¡Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "¡No está soportado!",
@@ -337,6 +335,7 @@
     "Cheers!" : "¡Saludos!",
     "Use the following link to reset your password: {link}" : "Use el siguiente link para restablecer su contraseña: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hola,<br><br> sólo queremos informarle que %s ha compartido <strong>%s</strong> con usted. <br><a href=\"%s\">¡Véalo!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. "
+    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. ",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/es_MX.js b/core/l10n/es_MX.js
index ee10eba6a44..d9b5816c1ae 100644
--- a/core/l10n/es_MX.js
+++ b/core/l10n/es_MX.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuración de los encabezados del proxy inverso es incorrecta, o está accediendo a Nextcloud desde un proxy de confianza. Si no esta accediendo a Nextcloud desde un proxy de confianza, se trata de un tema de seguridad y le puede permitir a un atacante hacer a su dirección IP apócrifa visible para Nextcloud. Puede encontar más infomración en nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurado como un caché distribuido, pero el módulo equivocado PHP \"memcache\" está instalado. \\OC\\Memcache\\Memcached sólo soporta \"memchached\" y no \"memchache\". Favor de ver el <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki de ambos módulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Algunos archivos no pasaron la verificación de integridad. Para mayor información de cómo resolver este tema consulte nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listado de archivos inválidos …</a> / <a href=\"{rescanEndpoint}\">Volver a escanear…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La fución PHP \"set_time_limit\" no está disponible. Esto podría generar scripts que se interrumpan a media ejecución, rompiendo la instalación. Le recomendamos ámpliamente habilitar esta función.",
     "Error occurred while checking server setup" : "Se presentó un error al verificar la configuración del servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Posiblemente sus archivos y directorio de datos sean accesibles desde Internet. El archivo .htaccess no está funcionando. Le recomendamos ámpliamente que configure su servidor web de tal modo que el directorio de datos no sea accesible o que mueva el directorio de datos fuera de la raíz de documentos del servidor web. ",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Expiración",
     "Expiration date" : "Fecha de expiración",
     "Choose a password for the public link" : "Seleccione una contraseña para la liga pública",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Favor de elegir una contraseña para la liga pública o presione  \"Intro ↵\"",
     "Copied!" : "¡Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "¡No está soportado!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "¡Saludos!",
     "Use the following link to reset your password: {link}" : "Use la siguiente liga para restablecer su contraseña: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hola,<br><br> sólo queremos informarle que %s ha compartido <strong>%s</strong> con usted. <br><a href=\"%s\">¡Véalo!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. "
+    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. ",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/es_MX.json b/core/l10n/es_MX.json
index 18ebbbf5ad8..9ebaa04fb89 100644
--- a/core/l10n/es_MX.json
+++ b/core/l10n/es_MX.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuración de los encabezados del proxy inverso es incorrecta, o está accediendo a Nextcloud desde un proxy de confianza. Si no esta accediendo a Nextcloud desde un proxy de confianza, se trata de un tema de seguridad y le puede permitir a un atacante hacer a su dirección IP apócrifa visible para Nextcloud. Puede encontar más infomración en nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurado como un caché distribuido, pero el módulo equivocado PHP \"memcache\" está instalado. \\OC\\Memcache\\Memcached sólo soporta \"memchached\" y no \"memchache\". Favor de ver el <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki de ambos módulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Algunos archivos no pasaron la verificación de integridad. Para mayor información de cómo resolver este tema consulte nuestra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentación</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listado de archivos inválidos …</a> / <a href=\"{rescanEndpoint}\">Volver a escanear…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La fución PHP \"set_time_limit\" no está disponible. Esto podría generar scripts que se interrumpan a media ejecución, rompiendo la instalación. Le recomendamos ámpliamente habilitar esta función.",
     "Error occurred while checking server setup" : "Se presentó un error al verificar la configuración del servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Posiblemente sus archivos y directorio de datos sean accesibles desde Internet. El archivo .htaccess no está funcionando. Le recomendamos ámpliamente que configure su servidor web de tal modo que el directorio de datos no sea accesible o que mueva el directorio de datos fuera de la raíz de documentos del servidor web. ",
@@ -125,7 +124,6 @@
     "Expiration" : "Expiración",
     "Expiration date" : "Fecha de expiración",
     "Choose a password for the public link" : "Seleccione una contraseña para la liga pública",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Favor de elegir una contraseña para la liga pública o presione  \"Intro ↵\"",
     "Copied!" : "¡Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "¡No está soportado!",
@@ -337,6 +335,7 @@
     "Cheers!" : "¡Saludos!",
     "Use the following link to reset your password: {link}" : "Use la siguiente liga para restablecer su contraseña: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hola,<br><br> sólo queremos informarle que %s ha compartido <strong>%s</strong> con usted. <br><a href=\"%s\">¡Véalo!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. "
+    "Please use the command line updater because you have a big instance." : "Favor de usar el actualizador de línea de comando porque usted tiene una instancia grande. ",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache no se encuentra correctamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para un mejor desempelo le recomendamos↗</a> usar los siguientes configuraciones en el archivo <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/fi.js b/core/l10n/fi.js
index eaa94767f5f..30f174a3535 100644
--- a/core/l10n/fi.js
+++ b/core/l10n/fi.js
@@ -104,7 +104,6 @@ OC.L10N.register(
     "You are currently running PHP {version}. We encourage you to upgrade your PHP version to take advantage of <a target=\"_blank\" rel=\"noreferrer\" href=\"{phpLink}\">performance and security updates provided by the PHP Group</a> as soon as your distribution supports it." : "Sinulla on käytössä PHP {version}. Suosittelemme päivittämään PHP-versiosi saadaksesi <a target=\"_blank\" rel=\"noreferrer\" href=\"{phpLink}\">PHP Group:n suorituskyky ja tietoturvapäivityksiä</a> niin pian kuin jakelusi sitä tukee.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached on määritelty hajautetuksi välimuistiksi, mutta väärä PHP-moduuli \"memcache\" on asennettu. \\OC\\Memcache\\Memcached tukee vain moduulia \"memcached\", mutta ei moduulia \"memcache\". Katso <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wikiä molemmista moduleista</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Jotkin tiedostot eivät ole läpäisseet eheystarkistusta. Lisätietoa ongelman korjaamiseksi on <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">ohjeissamme</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listaa virheelliset tiedostot…</a> / <a href=\"{rescanEndpoint}\">Uudelleen skannaa…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache ei ole oikein määritelty. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Suosittelemme paremman suorituskyvyn saavuttamiseksi ↗</a> käyttämään seuraavia asetuksia <code>php.ini</code>-asetustiedostossa:",
     "Error occurred while checking server setup" : "Virhe palvelimen määrityksiä tarkistaessa",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Data-hakemistosi ja tiedostosi ovat luultavasti käytettävissä suoraan Internetistä. .htaccess-tiedosto ei toimi oikein. Suosittelemme määrittämään HTTP-palvelimen asetukset siten, ettei data-hakemisto ole suoraan käytettävissä Internetistä tai siirtämään data-hakemiston HTTP-palvelimen juurihakemiston ulkopuolelle.",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "HTTP-otsaketta \"{header}\" ei ole määritetty vastaamaan arvoa \"{expected}\". Kyseessä on mahdollinen tietoturvaan tai -suojaan liittyvä riski, joten suosittelemme muuttamaan asetuksen arvoa.",
@@ -118,7 +117,6 @@ OC.L10N.register(
     "Expiration" : "Vanheneminen",
     "Expiration date" : "Vanhenemispäivä",
     "Choose a password for the public link" : "Valitse salasana julkiselle linkille",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Valitse salasana julkiselle linkille tai paina \"Enter ↵\"",
     "Copied!" : "Kopioitu!",
     "Copy" : "Kopioi",
     "Not supported!" : "Ei tuettu!",
@@ -328,6 +326,7 @@ OC.L10N.register(
     "Cheers!" : "Kiitos!",
     "Use the following link to reset your password: {link}" : "Voit palauttaa salasanasi seuraavassa osoitteessa: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hei,<br><br>%s jakoi kanssasi kohteen <strong>%s</strong>.<br><a href=\"%s\">Tutustu siihen!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Käytä komentorivipäivitintä, koska käyttämäsi Nextcloud on sen verran suuri."
+    "Please use the command line updater because you have a big instance." : "Käytä komentorivipäivitintä, koska käyttämäsi Nextcloud on sen verran suuri.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache ei ole oikein määritelty. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Suosittelemme paremman suorituskyvyn saavuttamiseksi ↗</a> käyttämään seuraavia asetuksia <code>php.ini</code>-asetustiedostossa:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/fi.json b/core/l10n/fi.json
index 53b7b16aa7f..fd70c86c2fa 100644
--- a/core/l10n/fi.json
+++ b/core/l10n/fi.json
@@ -102,7 +102,6 @@
     "You are currently running PHP {version}. We encourage you to upgrade your PHP version to take advantage of <a target=\"_blank\" rel=\"noreferrer\" href=\"{phpLink}\">performance and security updates provided by the PHP Group</a> as soon as your distribution supports it." : "Sinulla on käytössä PHP {version}. Suosittelemme päivittämään PHP-versiosi saadaksesi <a target=\"_blank\" rel=\"noreferrer\" href=\"{phpLink}\">PHP Group:n suorituskyky ja tietoturvapäivityksiä</a> niin pian kuin jakelusi sitä tukee.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached on määritelty hajautetuksi välimuistiksi, mutta väärä PHP-moduuli \"memcache\" on asennettu. \\OC\\Memcache\\Memcached tukee vain moduulia \"memcached\", mutta ei moduulia \"memcache\". Katso <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wikiä molemmista moduleista</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Jotkin tiedostot eivät ole läpäisseet eheystarkistusta. Lisätietoa ongelman korjaamiseksi on <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">ohjeissamme</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listaa virheelliset tiedostot…</a> / <a href=\"{rescanEndpoint}\">Uudelleen skannaa…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache ei ole oikein määritelty. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Suosittelemme paremman suorituskyvyn saavuttamiseksi ↗</a> käyttämään seuraavia asetuksia <code>php.ini</code>-asetustiedostossa:",
     "Error occurred while checking server setup" : "Virhe palvelimen määrityksiä tarkistaessa",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Data-hakemistosi ja tiedostosi ovat luultavasti käytettävissä suoraan Internetistä. .htaccess-tiedosto ei toimi oikein. Suosittelemme määrittämään HTTP-palvelimen asetukset siten, ettei data-hakemisto ole suoraan käytettävissä Internetistä tai siirtämään data-hakemiston HTTP-palvelimen juurihakemiston ulkopuolelle.",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "HTTP-otsaketta \"{header}\" ei ole määritetty vastaamaan arvoa \"{expected}\". Kyseessä on mahdollinen tietoturvaan tai -suojaan liittyvä riski, joten suosittelemme muuttamaan asetuksen arvoa.",
@@ -116,7 +115,6 @@
     "Expiration" : "Vanheneminen",
     "Expiration date" : "Vanhenemispäivä",
     "Choose a password for the public link" : "Valitse salasana julkiselle linkille",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Valitse salasana julkiselle linkille tai paina \"Enter ↵\"",
     "Copied!" : "Kopioitu!",
     "Copy" : "Kopioi",
     "Not supported!" : "Ei tuettu!",
@@ -326,6 +324,7 @@
     "Cheers!" : "Kiitos!",
     "Use the following link to reset your password: {link}" : "Voit palauttaa salasanasi seuraavassa osoitteessa: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hei,<br><br>%s jakoi kanssasi kohteen <strong>%s</strong>.<br><a href=\"%s\">Tutustu siihen!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Käytä komentorivipäivitintä, koska käyttämäsi Nextcloud on sen verran suuri."
+    "Please use the command line updater because you have a big instance." : "Käytä komentorivipäivitintä, koska käyttämäsi Nextcloud on sen verran suuri.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache ei ole oikein määritelty. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Suosittelemme paremman suorituskyvyn saavuttamiseksi ↗</a> käyttämään seuraavia asetuksia <code>php.ini</code>-asetustiedostossa:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/fr.js b/core/l10n/fr.js
index ee6725cf559..189ee5e7647 100644
--- a/core/l10n/fr.js
+++ b/core/l10n/fr.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuration des entêtes du proxy inverse est incorrecte, ou vous accédez à Nextcloud depuis un proxy de confiance. Si vous n'êtes pas en train d’accéder à Nextcloud depuis un proxy de confiance, ceci est un problème de sécurité qui peut permettre à un attaquant d'usurper l'adresse IP affichée à Nextcloud. Consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a> pour avoir plus d'informations à ce sujet.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "\"memcached\" est configuré comme cache distribué, mais  le mauvais module PHP est installé.  \\OC\\Memcache\\Memcached ne prend en charge que \"memcached\" et non \"memcache\". <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">Consulter le wiki de memcached à propos de ces deux modules.</a>",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Des fichiers n'ont pas passé la vérification d’intégrité. Plus d'information sur comment résoudre ce problème dans notre <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste des fichiers invalides…</a> / <a href=\"{rescanEndpoint}\">Relancer…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Le PHP Opcache n'est pas correctement configuré. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pour de meilleure performance nous recommandons ↗</a> d'utiliser les paramètres suivant dans le <code>php.ini</code> :",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La fonction PHP \"set_time_limit\" n'est pas disponible. Cela pourrait entraîner l'arrêt des scripts à mi-exécution interrompant votre installation. Nous vous recommandons vivement d'activer cette fonction.",
     "Error occurred while checking server setup" : "Une erreur s'est produite lors de la vérification de la configuration du serveur",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Votre dossier de données et vos fichiers sont probablement accessibles depuis internet. Le fichier .htaccess ne fonctionne pas. Nous vous recommandons vivement de configurer votre serveur web de façon à ce que ce dossier de données ne soit plus accessible, ou de le déplacer hors de la racine du serveur web.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Expiration",
     "Expiration date" : "Date d'expiration",
     "Choose a password for the public link" : "Choisissez un mot de passe pour le lien public",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Choisissez un mot de passe pour le lien public ou appuyez sur \"Entrée ↵\"",
     "Copied!" : "Copié !",
     "Copy" : "Copier",
     "Not supported!" : "Non supporté!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "À bientôt !",
     "Use the following link to reset your password: {link}" : "Utilisez le lien suivant pour réinitialiser votre mot de passe : {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Bonjour,<br><br>Nous vous informons que %s a partagé <strong>%s</strong> avec vous.<br><a href=\"%s\">Cliquez ici pour y accéder !</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Veuillez utiliser la mise à jour en ligne de commande car votre instance est volumineuse."
+    "Please use the command line updater because you have a big instance." : "Veuillez utiliser la mise à jour en ligne de commande car votre instance est volumineuse.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Le PHP Opcache n'est pas correctement configuré. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pour de meilleure performance nous recommandons ↗</a> d'utiliser les paramètres suivant dans le <code>php.ini</code> :"
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/core/l10n/fr.json b/core/l10n/fr.json
index f232e069a1d..2d9fd9b7ba4 100644
--- a/core/l10n/fr.json
+++ b/core/l10n/fr.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configuration des entêtes du proxy inverse est incorrecte, ou vous accédez à Nextcloud depuis un proxy de confiance. Si vous n'êtes pas en train d’accéder à Nextcloud depuis un proxy de confiance, ceci est un problème de sécurité qui peut permettre à un attaquant d'usurper l'adresse IP affichée à Nextcloud. Consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a> pour avoir plus d'informations à ce sujet.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "\"memcached\" est configuré comme cache distribué, mais  le mauvais module PHP est installé.  \\OC\\Memcache\\Memcached ne prend en charge que \"memcached\" et non \"memcache\". <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">Consulter le wiki de memcached à propos de ces deux modules.</a>",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Des fichiers n'ont pas passé la vérification d’intégrité. Plus d'information sur comment résoudre ce problème dans notre <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste des fichiers invalides…</a> / <a href=\"{rescanEndpoint}\">Relancer…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Le PHP Opcache n'est pas correctement configuré. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pour de meilleure performance nous recommandons ↗</a> d'utiliser les paramètres suivant dans le <code>php.ini</code> :",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La fonction PHP \"set_time_limit\" n'est pas disponible. Cela pourrait entraîner l'arrêt des scripts à mi-exécution interrompant votre installation. Nous vous recommandons vivement d'activer cette fonction.",
     "Error occurred while checking server setup" : "Une erreur s'est produite lors de la vérification de la configuration du serveur",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Votre dossier de données et vos fichiers sont probablement accessibles depuis internet. Le fichier .htaccess ne fonctionne pas. Nous vous recommandons vivement de configurer votre serveur web de façon à ce que ce dossier de données ne soit plus accessible, ou de le déplacer hors de la racine du serveur web.",
@@ -125,7 +124,6 @@
     "Expiration" : "Expiration",
     "Expiration date" : "Date d'expiration",
     "Choose a password for the public link" : "Choisissez un mot de passe pour le lien public",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Choisissez un mot de passe pour le lien public ou appuyez sur \"Entrée ↵\"",
     "Copied!" : "Copié !",
     "Copy" : "Copier",
     "Not supported!" : "Non supporté!",
@@ -337,6 +335,7 @@
     "Cheers!" : "À bientôt !",
     "Use the following link to reset your password: {link}" : "Utilisez le lien suivant pour réinitialiser votre mot de passe : {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Bonjour,<br><br>Nous vous informons que %s a partagé <strong>%s</strong> avec vous.<br><a href=\"%s\">Cliquez ici pour y accéder !</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Veuillez utiliser la mise à jour en ligne de commande car votre instance est volumineuse."
+    "Please use the command line updater because you have a big instance." : "Veuillez utiliser la mise à jour en ligne de commande car votre instance est volumineuse.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Le PHP Opcache n'est pas correctement configuré. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pour de meilleure performance nous recommandons ↗</a> d'utiliser les paramètres suivant dans le <code>php.ini</code> :"
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/id.js b/core/l10n/id.js
index 723db8dfa08..0b0f6c4d9ab 100644
--- a/core/l10n/id.js
+++ b/core/l10n/id.js
@@ -95,7 +95,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Konfigurasi proxy header terbalik salah, atau Anda mengakses Nextcloud dari proxy terpercaya. Apabila Anda tidak mengakses Nextcloud dari proxy terpercaya, ini adalah masalah keamanan dan penyerang dapat memalsukan alamat IP mereka ke Nextcloud. Informasi selanjutnya bisa ditemukan di <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasi</a> kami.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached terkonfigurasi sebagai cache terdistribusi, tetapi modul PHP \"memcache\" yang salah terpasang. \\OC\\Memcache\\Memcached hanya mendukung \"memcached\" dan bukan \"memcache\". Lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki memcached tentang kedua modul</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Beberapa berkas tidak lulus cek integritas. Informasi lebih lanjut tentang cara mengatasi masalah ini dapat ditemukan di <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasi</a> kami. (<a href=\"{codeIntegrityDownloadEndpoint}\">Daftar berkas yang tidak valid…</a> / <a href=\"{rescanEndpoint}\">Pindai ulang…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache tidak dikonfigurasi secara baik. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Untuk performa lebih baik kami merekomendasikan ↗</a>  untuk menggunakan pengaturan berikut di <code>php.ini</code>:",
     "Error occurred while checking server setup" : "Kesalahan tidak terduga saat memeriksa setelan server",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "Header HTTP \"{header}\" tidak dikonfigurasi sama dengan \"{expected}\". Hal ini berpotensi pada resiko keamanan dan privasi. Kami sarankan untuk menyesuaikan pengaturan ini.",
     "The \"Strict-Transport-Security\" HTTP header is not configured to at least \"{seconds}\" seconds. For enhanced security we recommend enabling HSTS as described in our <a href=\"{docUrl}\" rel=\"noreferrer\">security tips</a>." : "Header \"Strict-Transport-Security\" HTTP tidak terkonfigurasi ke setidaknya \"{seconds}\" detik. Untuk meningkatkan kemanan kami merekomendasikan mengaktifkan HSTS seperti yang dijelaskan di <a href=\"{docUrl}\" rel=\"noreferrer\">saran keamanan</a> kami.",
@@ -290,6 +289,7 @@ OC.L10N.register(
     "Cheers!" : "Horee!",
     "Use the following link to reset your password: {link}" : "Gunakan tautan berikut untuk menyetel ulang sandi Anda: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hai,<br><br>hanya memberi tahu jika %s membagikan <strong>%s</strong> dengan Anda.<br><a href=\"%s\">Lihat!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Gunakan pembaruan command-line karena Anda mempunyai instansi yang besar."
+    "Please use the command line updater because you have a big instance." : "Gunakan pembaruan command-line karena Anda mempunyai instansi yang besar.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache tidak dikonfigurasi secara baik. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Untuk performa lebih baik kami merekomendasikan ↗</a>  untuk menggunakan pengaturan berikut di <code>php.ini</code>:"
 },
 "nplurals=1; plural=0;");
diff --git a/core/l10n/id.json b/core/l10n/id.json
index 56a3206ae4f..bc745b636c8 100644
--- a/core/l10n/id.json
+++ b/core/l10n/id.json
@@ -93,7 +93,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Konfigurasi proxy header terbalik salah, atau Anda mengakses Nextcloud dari proxy terpercaya. Apabila Anda tidak mengakses Nextcloud dari proxy terpercaya, ini adalah masalah keamanan dan penyerang dapat memalsukan alamat IP mereka ke Nextcloud. Informasi selanjutnya bisa ditemukan di <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasi</a> kami.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached terkonfigurasi sebagai cache terdistribusi, tetapi modul PHP \"memcache\" yang salah terpasang. \\OC\\Memcache\\Memcached hanya mendukung \"memcached\" dan bukan \"memcache\". Lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki memcached tentang kedua modul</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Beberapa berkas tidak lulus cek integritas. Informasi lebih lanjut tentang cara mengatasi masalah ini dapat ditemukan di <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasi</a> kami. (<a href=\"{codeIntegrityDownloadEndpoint}\">Daftar berkas yang tidak valid…</a> / <a href=\"{rescanEndpoint}\">Pindai ulang…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache tidak dikonfigurasi secara baik. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Untuk performa lebih baik kami merekomendasikan ↗</a>  untuk menggunakan pengaturan berikut di <code>php.ini</code>:",
     "Error occurred while checking server setup" : "Kesalahan tidak terduga saat memeriksa setelan server",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "Header HTTP \"{header}\" tidak dikonfigurasi sama dengan \"{expected}\". Hal ini berpotensi pada resiko keamanan dan privasi. Kami sarankan untuk menyesuaikan pengaturan ini.",
     "The \"Strict-Transport-Security\" HTTP header is not configured to at least \"{seconds}\" seconds. For enhanced security we recommend enabling HSTS as described in our <a href=\"{docUrl}\" rel=\"noreferrer\">security tips</a>." : "Header \"Strict-Transport-Security\" HTTP tidak terkonfigurasi ke setidaknya \"{seconds}\" detik. Untuk meningkatkan kemanan kami merekomendasikan mengaktifkan HSTS seperti yang dijelaskan di <a href=\"{docUrl}\" rel=\"noreferrer\">saran keamanan</a> kami.",
@@ -288,6 +287,7 @@
     "Cheers!" : "Horee!",
     "Use the following link to reset your password: {link}" : "Gunakan tautan berikut untuk menyetel ulang sandi Anda: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hai,<br><br>hanya memberi tahu jika %s membagikan <strong>%s</strong> dengan Anda.<br><a href=\"%s\">Lihat!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Gunakan pembaruan command-line karena Anda mempunyai instansi yang besar."
+    "Please use the command line updater because you have a big instance." : "Gunakan pembaruan command-line karena Anda mempunyai instansi yang besar.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache tidak dikonfigurasi secara baik. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Untuk performa lebih baik kami merekomendasikan ↗</a>  untuk menggunakan pengaturan berikut di <code>php.ini</code>:"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/core/l10n/is.js b/core/l10n/is.js
index f50471caa3f..fd2debbba51 100644
--- a/core/l10n/is.js
+++ b/core/l10n/is.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Uppsetning gagnstæðs milliþjónshauss (reverse proxy header) er röng, eða að þú ert að tengjast Nextcloud frá treystum milliþjóni Ef þú ert ekki að tengjast Nextcloud frá treystum milliþjóni, þá er þetta er öryggisvandamál og getur leyft árásaraðilum að dulbúa IP-vistfang þeirra sem sýnilegt Nextcloud. Nánari upplýsingar má finna í <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">hjálparskjölum</a> okkar.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached er sett upp sem dreift skyndiminni, en hinsvegar er ranga PHP-einingin \"memcache\" uppsett. \\OC\\Memcache\\Memcached styður einungis \"memcached\" en ekki \"memcache\". Skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki-síðurnar um báðar einingarnar</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Sumar skrár hafa ekki staðist áreiðanleikaprófun. Hægt er að finna nánari upplýsingar um þetta í <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">hjálparskjölum</a> okkar. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listi yfir ógildar skrár…</a> / <a href=\"{rescanEndpoint}\">Endurskanna…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache er ekki rétt uppsett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Fyrir betri afköst mælum við með ↗</a> því að nota eftirfarandi stillingar í <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP-fallið \"set_time_limit\" er ekki tiltækt. Þetta gæti valdið því að skriftur stöðvist í miðri keyrslu og skemmi uppsetninguna þína. Við mælumst til þess að þetta fall sé gert virkt.",
     "Error occurred while checking server setup" : "Villa kom upp við athugun á uppsetningu þjóns",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Gagnamappan og skrárnar þínar eru líklega aðgengilegar öllum af internetinu vegna þess að .htaccess skrá er ekki virk. Við mælum eindregið með að þú stillir vefþjóninn þinn á þann hátt að gagnamappa er ekki lengur aðgengileg eða þú færir gagnamöppu út fyrir skjalarót vefþjóns.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Rennur út",
     "Expiration date" : "Gildir til",
     "Choose a password for the public link" : "Veldu þér lykilorð fyrir almenningstengil",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Veldu þér lykilorð fyrir opinberan tengil eða ýttu á \"Enter ↵\"",
     "Copied!" : "Afritað!",
     "Copy" : "Afrita",
     "Not supported!" : "Óstutt!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Skál!",
     "Use the following link to reset your password: {link}" : "Notað eftirfarandi veftengil til að endursetja lykilorðið þitt: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hæ þú,<br><br>bara að láta þig vita að %s deildi <strong>%s</strong> með þér.<br><a href=\"%s\">Skoðaðu það!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Endilega notaðu uppfærslutólið af skipanalínu, því þú ert með mjög stóra uppsetningu."
+    "Please use the command line updater because you have a big instance." : "Endilega notaðu uppfærslutólið af skipanalínu, því þú ert með mjög stóra uppsetningu.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache er ekki rétt uppsett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Fyrir betri afköst mælum við með ↗</a> því að nota eftirfarandi stillingar í <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);");
diff --git a/core/l10n/is.json b/core/l10n/is.json
index f3579e279ac..758fe593a94 100644
--- a/core/l10n/is.json
+++ b/core/l10n/is.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Uppsetning gagnstæðs milliþjónshauss (reverse proxy header) er röng, eða að þú ert að tengjast Nextcloud frá treystum milliþjóni Ef þú ert ekki að tengjast Nextcloud frá treystum milliþjóni, þá er þetta er öryggisvandamál og getur leyft árásaraðilum að dulbúa IP-vistfang þeirra sem sýnilegt Nextcloud. Nánari upplýsingar má finna í <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">hjálparskjölum</a> okkar.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached er sett upp sem dreift skyndiminni, en hinsvegar er ranga PHP-einingin \"memcache\" uppsett. \\OC\\Memcache\\Memcached styður einungis \"memcached\" en ekki \"memcache\". Skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki-síðurnar um báðar einingarnar</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Sumar skrár hafa ekki staðist áreiðanleikaprófun. Hægt er að finna nánari upplýsingar um þetta í <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">hjálparskjölum</a> okkar. (<a href=\"{codeIntegrityDownloadEndpoint}\">Listi yfir ógildar skrár…</a> / <a href=\"{rescanEndpoint}\">Endurskanna…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache er ekki rétt uppsett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Fyrir betri afköst mælum við með ↗</a> því að nota eftirfarandi stillingar í <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP-fallið \"set_time_limit\" er ekki tiltækt. Þetta gæti valdið því að skriftur stöðvist í miðri keyrslu og skemmi uppsetninguna þína. Við mælumst til þess að þetta fall sé gert virkt.",
     "Error occurred while checking server setup" : "Villa kom upp við athugun á uppsetningu þjóns",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Gagnamappan og skrárnar þínar eru líklega aðgengilegar öllum af internetinu vegna þess að .htaccess skrá er ekki virk. Við mælum eindregið með að þú stillir vefþjóninn þinn á þann hátt að gagnamappa er ekki lengur aðgengileg eða þú færir gagnamöppu út fyrir skjalarót vefþjóns.",
@@ -125,7 +124,6 @@
     "Expiration" : "Rennur út",
     "Expiration date" : "Gildir til",
     "Choose a password for the public link" : "Veldu þér lykilorð fyrir almenningstengil",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Veldu þér lykilorð fyrir opinberan tengil eða ýttu á \"Enter ↵\"",
     "Copied!" : "Afritað!",
     "Copy" : "Afrita",
     "Not supported!" : "Óstutt!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Skál!",
     "Use the following link to reset your password: {link}" : "Notað eftirfarandi veftengil til að endursetja lykilorðið þitt: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hæ þú,<br><br>bara að láta þig vita að %s deildi <strong>%s</strong> með þér.<br><a href=\"%s\">Skoðaðu það!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Endilega notaðu uppfærslutólið af skipanalínu, því þú ert með mjög stóra uppsetningu."
+    "Please use the command line updater because you have a big instance." : "Endilega notaðu uppfærslutólið af skipanalínu, því þú ert með mjög stóra uppsetningu.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache er ekki rétt uppsett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Fyrir betri afköst mælum við með ↗</a> því að nota eftirfarandi stillingar í <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);"
 }
\ No newline at end of file
diff --git a/core/l10n/it.js b/core/l10n/it.js
index aa1fba66d68..7b1c311533c 100644
--- a/core/l10n/it.js
+++ b/core/l10n/it.js
@@ -103,7 +103,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configurazione delle intestazioni del proxy inverso non è corretta, o stai effettuando l'accesso a Nextcloud da un proxy affidabile. Se non stai effettuando l'accesso da un proxy affidabile, questo è un problema di sicurezza e può consentire a un attaccante di falsificare il suo indirizzo IP, rendendolo visibile a Nextcloud. Ulteriori informazioni sono disponibili nella nostra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentazione</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached è configurato come cache distribuita, ma è installato il modulo \"memcache\" errato. \\OC\\Memcache\\Memcached supporta solo \"memcached\" e non \"memcache\". Vedi il  <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki di memcached per informazioni su entrambi i moduli</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Alcuni file non hanno superato il controllo di integrità. Ulteriori informazioni su come risolvere questo problema sono disponibili nella nostra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentazione</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Elenco dei file non validi…</a> / <a href=\"{rescanEndpoint}\">Nuova scansione…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OpCache non è configurata correttamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Per prestazioni migliori consigliamo</a> di utilizzare le impostazioni in <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La funzione PHP \"set_time_limit\" non è disponibile. Ciò potrebbe comportare l'interruzione di script durante l'esecuzione, compromettendo la tua installazione. Ti consigliamo vivamente di abilitare questa funzione.",
     "Error occurred while checking server setup" : "Si è verificato un errore durante il controllo della configurazione del server",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "L'intestazione HTTP \"{header}\" non è configurata come \"{expected}\". \nQuesto è un potenziale rischio di sicurezza o di riservatezza dei dati e noi consigliamo di modificare questa impostazione.",
@@ -117,7 +116,6 @@ OC.L10N.register(
     "Expiration" : "Scadenza",
     "Expiration date" : "Data di scadenza",
     "Choose a password for the public link" : "Scegli una password per il collegamento pubblico",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Scegli una password per il collegamento pubblico o premi \"Invio ↵\"",
     "Copied!" : "Copiati!",
     "Copy" : "Copia",
     "Not supported!" : "Non supportato!",
@@ -319,6 +317,7 @@ OC.L10N.register(
     "Cheers!" : "Saluti!",
     "Use the following link to reset your password: {link}" : "Usa il collegamento seguente per ripristinare la password: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Ciao,<br><br>volevo informarti che %s ha condiviso <strong>%s</strong> con te.<br><a href=\"%s\">Guarda!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Utilizza lo strumento da riga di comando per la grandezza della tua istanza."
+    "Please use the command line updater because you have a big instance." : "Utilizza lo strumento da riga di comando per la grandezza della tua istanza.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OpCache non è configurata correttamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Per prestazioni migliori consigliamo</a> di utilizzare le impostazioni in <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/it.json b/core/l10n/it.json
index d5b8aba46da..3047d0df298 100644
--- a/core/l10n/it.json
+++ b/core/l10n/it.json
@@ -101,7 +101,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "La configurazione delle intestazioni del proxy inverso non è corretta, o stai effettuando l'accesso a Nextcloud da un proxy affidabile. Se non stai effettuando l'accesso da un proxy affidabile, questo è un problema di sicurezza e può consentire a un attaccante di falsificare il suo indirizzo IP, rendendolo visibile a Nextcloud. Ulteriori informazioni sono disponibili nella nostra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentazione</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached è configurato come cache distribuita, ma è installato il modulo \"memcache\" errato. \\OC\\Memcache\\Memcached supporta solo \"memcached\" e non \"memcache\". Vedi il  <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki di memcached per informazioni su entrambi i moduli</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Alcuni file non hanno superato il controllo di integrità. Ulteriori informazioni su come risolvere questo problema sono disponibili nella nostra <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentazione</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Elenco dei file non validi…</a> / <a href=\"{rescanEndpoint}\">Nuova scansione…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OpCache non è configurata correttamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Per prestazioni migliori consigliamo</a> di utilizzare le impostazioni in <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "La funzione PHP \"set_time_limit\" non è disponibile. Ciò potrebbe comportare l'interruzione di script durante l'esecuzione, compromettendo la tua installazione. Ti consigliamo vivamente di abilitare questa funzione.",
     "Error occurred while checking server setup" : "Si è verificato un errore durante il controllo della configurazione del server",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "L'intestazione HTTP \"{header}\" non è configurata come \"{expected}\". \nQuesto è un potenziale rischio di sicurezza o di riservatezza dei dati e noi consigliamo di modificare questa impostazione.",
@@ -115,7 +114,6 @@
     "Expiration" : "Scadenza",
     "Expiration date" : "Data di scadenza",
     "Choose a password for the public link" : "Scegli una password per il collegamento pubblico",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Scegli una password per il collegamento pubblico o premi \"Invio ↵\"",
     "Copied!" : "Copiati!",
     "Copy" : "Copia",
     "Not supported!" : "Non supportato!",
@@ -317,6 +315,7 @@
     "Cheers!" : "Saluti!",
     "Use the following link to reset your password: {link}" : "Usa il collegamento seguente per ripristinare la password: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Ciao,<br><br>volevo informarti che %s ha condiviso <strong>%s</strong> con te.<br><a href=\"%s\">Guarda!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Utilizza lo strumento da riga di comando per la grandezza della tua istanza."
+    "Please use the command line updater because you have a big instance." : "Utilizza lo strumento da riga di comando per la grandezza della tua istanza.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OpCache non è configurata correttamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Per prestazioni migliori consigliamo</a> di utilizzare le impostazioni in <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/ja.js b/core/l10n/ja.js
index 486d62f55f7..d1e6c51d673 100644
--- a/core/l10n/ja.js
+++ b/core/l10n/ja.js
@@ -103,7 +103,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "リバースプロキシヘッダーの設定が正しくないか、信頼できるプロキシからNextcloudにアクセスしています。信頼できるプロキシからNextcloudにアクセスしていない場合、これはセキュリティ上の問題であり、攻撃者が自分のIPアドレスを偽装してNextcloudに見えるようにしている可能性があります。詳細については、<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">ドキュメント</a>をご覧ください。",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached は分散キャッシュとして設定されています。しかし、PHPモジュール \"memcache\"が間違ってインストールされています。  \\OC\\Memcache\\Memcached は、\"memcached\" のみをサポートしています。\"memcache\" ではありません。<a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki で両方のモジュールの情報</a> について確認してください。",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "いくつかのファイルでチェックサムが適合しませんでした。この問題を解決するためは、<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">ドキュメント</a>の詳細を見てください。(<a href=\"{codeIntegrityDownloadEndpoint}\">不適合ファイルのリスト…</a> / <a href=\"{rescanEndpoint}\">再チェック…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache が正しく設定されていません。 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">パフォーマンスを向上させるため ↗</a> <code>php.ini</code> で次の設定を使用することをお勧めします:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP 関数 \"set_time_limit\" は使用できません。これにより実行スクリプトが途中で停止されて、インストールを破壊する可能性があります。この機能を有効にすることを強くお勧めします。",
     "Error occurred while checking server setup" : "サーバー設定のチェック中にエラーが発生しました",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "\"{header}\" HTTP ヘッダは \"{expected}\" に設定されていません。これは潜在的なセキュリティリスクもしくはプライバシーリスクとなる可能性があるため、この設定を見直すことをおすすめします。",
@@ -316,6 +315,7 @@ OC.L10N.register(
     "Cheers!" : "それでは！",
     "Use the following link to reset your password: {link}" : "パスワードをリセットするには次のリンクをクリックしてください: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "こんにちは、<br><br>%sがあなたと »%s« を共有したことをお知らせします。<br><a href=\"%s\">それを表示</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "データ量が大きいため、コマンドラインでの更新を利用してください。"
+    "Please use the command line updater because you have a big instance." : "データ量が大きいため、コマンドラインでの更新を利用してください。",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache が正しく設定されていません。 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">パフォーマンスを向上させるため ↗</a> <code>php.ini</code> で次の設定を使用することをお勧めします:"
 },
 "nplurals=1; plural=0;");
diff --git a/core/l10n/ja.json b/core/l10n/ja.json
index f17ea99d25c..20a7e6854cd 100644
--- a/core/l10n/ja.json
+++ b/core/l10n/ja.json
@@ -101,7 +101,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "リバースプロキシヘッダーの設定が正しくないか、信頼できるプロキシからNextcloudにアクセスしています。信頼できるプロキシからNextcloudにアクセスしていない場合、これはセキュリティ上の問題であり、攻撃者が自分のIPアドレスを偽装してNextcloudに見えるようにしている可能性があります。詳細については、<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">ドキュメント</a>をご覧ください。",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached は分散キャッシュとして設定されています。しかし、PHPモジュール \"memcache\"が間違ってインストールされています。  \\OC\\Memcache\\Memcached は、\"memcached\" のみをサポートしています。\"memcache\" ではありません。<a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki で両方のモジュールの情報</a> について確認してください。",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "いくつかのファイルでチェックサムが適合しませんでした。この問題を解決するためは、<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">ドキュメント</a>の詳細を見てください。(<a href=\"{codeIntegrityDownloadEndpoint}\">不適合ファイルのリスト…</a> / <a href=\"{rescanEndpoint}\">再チェック…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache が正しく設定されていません。 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">パフォーマンスを向上させるため ↗</a> <code>php.ini</code> で次の設定を使用することをお勧めします:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP 関数 \"set_time_limit\" は使用できません。これにより実行スクリプトが途中で停止されて、インストールを破壊する可能性があります。この機能を有効にすることを強くお勧めします。",
     "Error occurred while checking server setup" : "サーバー設定のチェック中にエラーが発生しました",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "\"{header}\" HTTP ヘッダは \"{expected}\" に設定されていません。これは潜在的なセキュリティリスクもしくはプライバシーリスクとなる可能性があるため、この設定を見直すことをおすすめします。",
@@ -314,6 +313,7 @@
     "Cheers!" : "それでは！",
     "Use the following link to reset your password: {link}" : "パスワードをリセットするには次のリンクをクリックしてください: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "こんにちは、<br><br>%sがあなたと »%s« を共有したことをお知らせします。<br><a href=\"%s\">それを表示</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "データ量が大きいため、コマンドラインでの更新を利用してください。"
+    "Please use the command line updater because you have a big instance." : "データ量が大きいため、コマンドラインでの更新を利用してください。",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache が正しく設定されていません。 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">パフォーマンスを向上させるため ↗</a> <code>php.ini</code> で次の設定を使用することをお勧めします:"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/core/l10n/ko.js b/core/l10n/ko.js
index 4646a60b99d..c7b97d21b17 100644
--- a/core/l10n/ko.js
+++ b/core/l10n/ko.js
@@ -108,7 +108,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "역방향 프록시 헤더 설정이 올바르지 않거나 신뢰하는 프록시를 통해 Nextcloud에 접근하고 있을 수 있습니다. 만약 Nextcloud를 신뢰하는 프록시를 통해 접근하고 있지 않다면 이는 보안 문제이며 공격자가 IP 주소를 속이고 있을 수 있습니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">문서</a>를 참고하십시오.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached가 분산 캐시로 구성되어 있지만 잘못된 PHP 모듈 \"memcache\"가 설치되어 있습니다. \\OC\\Memcache\\Memcached는 \"memcache\"가 아닌 \"memcached\"만 지원합니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">이 두 모듈에 대한 memcached 위키</a>를 참고하십시오.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "일부 파일이 무결성 검사를 통과하지 못습니다. 이 문제를 해결하는 방법은 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">문서</a>를 참고하십시오.(<a href=\"{codeIntegrityDownloadEndpoint}\">잘못된 파일 목록…</a> / <a href=\"{rescanEndpoint}\">다시 검색…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache가 제대로 설정되어 있지 않습니다. 더 나은 성능을 위해서 <code>php.ini</code> 파일에 다음 설정을 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">추가하는 것을 권장합니다 ↗</a>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP 함수 \"set_time_limit\"을(를) 사용할 수 없습니다. 스크립트가 실행 중간에 중지되어 설치를 깨트릴 수도 있습니다. 이 함수를 활성화하는 것을 추천합니다.",
     "Error occurred while checking server setup" : "서버 설정을 확인하는 중 오류 발생",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "데이터 디렉터리와 파일을 인터넷에서 접근할 수 있는 것 같습니다. .htaccess 파일을 사용할 수 없습니다. 웹 서버 설정을 변경하여 데이터 디렉터리에 접근할 수 없도록 하거나, 데이터 디렉터리를 웹 서버 문서 디렉터리 밖으로 옮기는 것을 추천합니다.",
@@ -123,7 +122,6 @@ OC.L10N.register(
     "Expiration" : "만료",
     "Expiration date" : "만료 날짜",
     "Choose a password for the public link" : "공개 링크 암호를 입력하십시오",
-    "Choose a password for the public link or press \"Enter ↵\"" : "공개 림크 암호를 입력하거나 \"Enter ↵\" 키를 누르십시오",
     "Copied!" : "복사 성공!",
     "Copy" : "복사",
     "Not supported!" : "지원하지 않음!",
@@ -331,6 +329,7 @@ OC.L10N.register(
     "Cheers!" : "감사합니다!",
     "Use the following link to reset your password: {link}" : "다음 링크를 사용하여 암호를 재설정할 수 있습니다: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "안녕하세요,<br><br>%s 님이 <strong>%s</strong>을(를) 공유하였음을 알려 드립니다.<br><a href=\"%s\">보러 가기!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "현재 인스턴스 크기가 크기 때문에 명령행 업데이터를 사용하십시오."
+    "Please use the command line updater because you have a big instance." : "현재 인스턴스 크기가 크기 때문에 명령행 업데이터를 사용하십시오.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache가 제대로 설정되어 있지 않습니다. 더 나은 성능을 위해서 <code>php.ini</code> 파일에 다음 설정을 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">추가하는 것을 권장합니다 ↗</a>:"
 },
 "nplurals=1; plural=0;");
diff --git a/core/l10n/ko.json b/core/l10n/ko.json
index 2dd22c76c71..7783701b358 100644
--- a/core/l10n/ko.json
+++ b/core/l10n/ko.json
@@ -106,7 +106,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "역방향 프록시 헤더 설정이 올바르지 않거나 신뢰하는 프록시를 통해 Nextcloud에 접근하고 있을 수 있습니다. 만약 Nextcloud를 신뢰하는 프록시를 통해 접근하고 있지 않다면 이는 보안 문제이며 공격자가 IP 주소를 속이고 있을 수 있습니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">문서</a>를 참고하십시오.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached가 분산 캐시로 구성되어 있지만 잘못된 PHP 모듈 \"memcache\"가 설치되어 있습니다. \\OC\\Memcache\\Memcached는 \"memcache\"가 아닌 \"memcached\"만 지원합니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">이 두 모듈에 대한 memcached 위키</a>를 참고하십시오.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "일부 파일이 무결성 검사를 통과하지 못습니다. 이 문제를 해결하는 방법은 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">문서</a>를 참고하십시오.(<a href=\"{codeIntegrityDownloadEndpoint}\">잘못된 파일 목록…</a> / <a href=\"{rescanEndpoint}\">다시 검색…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache가 제대로 설정되어 있지 않습니다. 더 나은 성능을 위해서 <code>php.ini</code> 파일에 다음 설정을 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">추가하는 것을 권장합니다 ↗</a>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP 함수 \"set_time_limit\"을(를) 사용할 수 없습니다. 스크립트가 실행 중간에 중지되어 설치를 깨트릴 수도 있습니다. 이 함수를 활성화하는 것을 추천합니다.",
     "Error occurred while checking server setup" : "서버 설정을 확인하는 중 오류 발생",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "데이터 디렉터리와 파일을 인터넷에서 접근할 수 있는 것 같습니다. .htaccess 파일을 사용할 수 없습니다. 웹 서버 설정을 변경하여 데이터 디렉터리에 접근할 수 없도록 하거나, 데이터 디렉터리를 웹 서버 문서 디렉터리 밖으로 옮기는 것을 추천합니다.",
@@ -121,7 +120,6 @@
     "Expiration" : "만료",
     "Expiration date" : "만료 날짜",
     "Choose a password for the public link" : "공개 링크 암호를 입력하십시오",
-    "Choose a password for the public link or press \"Enter ↵\"" : "공개 림크 암호를 입력하거나 \"Enter ↵\" 키를 누르십시오",
     "Copied!" : "복사 성공!",
     "Copy" : "복사",
     "Not supported!" : "지원하지 않음!",
@@ -329,6 +327,7 @@
     "Cheers!" : "감사합니다!",
     "Use the following link to reset your password: {link}" : "다음 링크를 사용하여 암호를 재설정할 수 있습니다: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "안녕하세요,<br><br>%s 님이 <strong>%s</strong>을(를) 공유하였음을 알려 드립니다.<br><a href=\"%s\">보러 가기!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "현재 인스턴스 크기가 크기 때문에 명령행 업데이터를 사용하십시오."
+    "Please use the command line updater because you have a big instance." : "현재 인스턴스 크기가 크기 때문에 명령행 업데이터를 사용하십시오.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache가 제대로 설정되어 있지 않습니다. 더 나은 성능을 위해서 <code>php.ini</code> 파일에 다음 설정을 <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">추가하는 것을 권장합니다 ↗</a>:"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/core/l10n/nb.js b/core/l10n/nb.js
index f974845e510..3613ba02c19 100644
--- a/core/l10n/nb.js
+++ b/core/l10n/nb.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "De omvendte mellomtjener-hodene er ikke satt opp rett, eller du kobler til Nextcloud fra en betrodd mellomtjener. Hvis du ikke kobler til Nextcloud fra en betrodd mellomtjener, er dette et sikkerhetsproblem, og kan tillate en angriper å forfalske deres IP-adresse slik den er synlig for Nextcloud. Ytterligere informasjon er å finne i <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasjonen</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached er satt opp som distribuert mellomlager, men feil PHP-modul \"memcache\" er installert. \\OC\\Memcache\\Memcached støtter bare \"memcached\" og ikke \"memcache\". Se <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached-wikien</a> for informasjon om begge modulene.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Noen filer besto ikke gyldighetssjekken. Ytterligere informasjon om hvordan dette problemet kan løses finnes i vår <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasjon</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste over ugyldige filer…</a> / <a href=\"{rescanEndpoint}\">Skann på ny…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache er ikke satt opp rett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For bedre ytelse anbefales det ↗</a> å bruke følgende innstillinger i <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP-funksjonen \"set_time_limit\" er ikke tilgjengelig. Dette kan resultere i at skript blir stoppet midt i kjøring, noe som knekker installasjonen din. Det anbefales sterkt å skru på denne funksjonen.",
     "Error occurred while checking server setup" : "Feil oppstod ved sjekking av tjener-oppsett",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Datamappen og filene dine er sannsynligvis tilgjengelige fra Internett. .htaccess-filen fungerer ikke. Det anbefales sterkt at du setter opp vev-tjeneren slik at datamappen ikke kan aksesseres eller at du flytter datamappen ut av vev-tjenerens dokumentrot.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Utløpsdato",
     "Expiration date" : "Utløpsdato",
     "Choose a password for the public link" : "Velg et passord for den offentlige lenken",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Velg et passord for den offentlige lenken eller trykk \"Enter ↵\"",
     "Copied!" : "Kopiert!",
     "Copy" : "Kopier",
     "Not supported!" : "Ikke støttet!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Ha det!",
     "Use the following link to reset your password: {link}" : "Bruk følgende lenke for å tilbakestille passordet ditt: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hei,<br><br>Dette er en beskjed om at %s delte <strong>%s</strong> med deg.<br><a href=\"%s\">Vis den!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Vennligst oppdater ved hjelp av kommandolinjen ettersom du har en stor installasjon."
+    "Please use the command line updater because you have a big instance." : "Vennligst oppdater ved hjelp av kommandolinjen ettersom du har en stor installasjon.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache er ikke satt opp rett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For bedre ytelse anbefales det ↗</a> å bruke følgende innstillinger i <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/nb.json b/core/l10n/nb.json
index 1bf84794c7e..642037a70b9 100644
--- a/core/l10n/nb.json
+++ b/core/l10n/nb.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "De omvendte mellomtjener-hodene er ikke satt opp rett, eller du kobler til Nextcloud fra en betrodd mellomtjener. Hvis du ikke kobler til Nextcloud fra en betrodd mellomtjener, er dette et sikkerhetsproblem, og kan tillate en angriper å forfalske deres IP-adresse slik den er synlig for Nextcloud. Ytterligere informasjon er å finne i <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasjonen</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached er satt opp som distribuert mellomlager, men feil PHP-modul \"memcache\" er installert. \\OC\\Memcache\\Memcached støtter bare \"memcached\" og ikke \"memcache\". Se <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached-wikien</a> for informasjon om begge modulene.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Noen filer besto ikke gyldighetssjekken. Ytterligere informasjon om hvordan dette problemet kan løses finnes i vår <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentasjon</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Liste over ugyldige filer…</a> / <a href=\"{rescanEndpoint}\">Skann på ny…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache er ikke satt opp rett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For bedre ytelse anbefales det ↗</a> å bruke følgende innstillinger i <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP-funksjonen \"set_time_limit\" er ikke tilgjengelig. Dette kan resultere i at skript blir stoppet midt i kjøring, noe som knekker installasjonen din. Det anbefales sterkt å skru på denne funksjonen.",
     "Error occurred while checking server setup" : "Feil oppstod ved sjekking av tjener-oppsett",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Datamappen og filene dine er sannsynligvis tilgjengelige fra Internett. .htaccess-filen fungerer ikke. Det anbefales sterkt at du setter opp vev-tjeneren slik at datamappen ikke kan aksesseres eller at du flytter datamappen ut av vev-tjenerens dokumentrot.",
@@ -125,7 +124,6 @@
     "Expiration" : "Utløpsdato",
     "Expiration date" : "Utløpsdato",
     "Choose a password for the public link" : "Velg et passord for den offentlige lenken",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Velg et passord for den offentlige lenken eller trykk \"Enter ↵\"",
     "Copied!" : "Kopiert!",
     "Copy" : "Kopier",
     "Not supported!" : "Ikke støttet!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Ha det!",
     "Use the following link to reset your password: {link}" : "Bruk følgende lenke for å tilbakestille passordet ditt: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hei,<br><br>Dette er en beskjed om at %s delte <strong>%s</strong> med deg.<br><a href=\"%s\">Vis den!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Vennligst oppdater ved hjelp av kommandolinjen ettersom du har en stor installasjon."
+    "Please use the command line updater because you have a big instance." : "Vennligst oppdater ved hjelp av kommandolinjen ettersom du har en stor installasjon.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache er ikke satt opp rett. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For bedre ytelse anbefales det ↗</a> å bruke følgende innstillinger i <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/nl.js b/core/l10n/nl.js
index b02f03f422f..7dfe7cf4b34 100644
--- a/core/l10n/nl.js
+++ b/core/l10n/nl.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "De reverse proxy headerconfiguratie is onjuist, of je hebt toegang tot Nextcloud via een vertrouwde proxy. Als je Nextcloud niet via een vertrouwde proxy benadert, dan levert dat een beveiligingsrisico op, waardoor een aanvaller het IP-adres dat Nextcloud ziet kan vervalsen. Meer informatie is te vinden in onze <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentatie</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached is geconfigureerd als gedistribueerde cache, maar de verkeerde PHP module \"memcache\" is geïnstalleerd. \\OC\\Memcache\\Memcached ondersteunt alleen \"memcached\" en niet \"memcache\". Zie de <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki over beide modules</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Sommige bestanden kwamen niet door de code betrouwbaarheidscontrole. Meer informatie over het oplossen van dit probleem kan worden gevonden in onze <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentatie</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lijst met ongeldige bestanden…</a> / <a href=\"{rescanEndpoint}\">Opnieuw…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "De PHP Opcache is niet juist geconfigureerd. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Voor betere prestaties adviseren we  ↗</a> de volgende instellingen te gebruiken in <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "De PHP functie \"set_time_limit\" is niet beschikbaar. Dit kan erin resulteren dat de scripts halverwege stoppen, waardoor de installatie ontregeld raakt. We adviseren met klem om deze functie in te schakelen.",
     "Error occurred while checking server setup" : "Een fout trad op bij checken serverconfiguratie",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Je datamap en je bestanden zijn waarschijnlijk vanaf het internet bereikbaar.  Het .htaccess-bestand werkt niet. We raden ten zeerste aan aan om je webserver zodanig te configureren, dat de datadirectory niet bereikbaar is vanaf het internet of om je datadirectory te verplaatsen naar een locatie buiten de document-root van de webserver.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Vervaltermijn",
     "Expiration date" : "Vervaldatum",
     "Choose a password for the public link" : "Kies een wachtwoord voor de openbare link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Kies een wachtwoord voor de openbare link of druk op \"Enter ↵\"",
     "Copied!" : "Gekopieerd!",
     "Copy" : "Kopiëren",
     "Not supported!" : "Niet ondersteund!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Proficiat!",
     "Use the following link to reset your password: {link}" : "Gebruik de volgende link om je wachtwoord te resetten: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hallo daar,<br><br>%s deelde <strong>%s</strong> met je.<br><a href=\"%s\">Bekijk het hier!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Gebruik de commandoregel updater, omdat je een grote Nextcloud hebt."
+    "Please use the command line updater because you have a big instance." : "Gebruik de commandoregel updater, omdat je een grote Nextcloud hebt.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "De PHP Opcache is niet juist geconfigureerd. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Voor betere prestaties adviseren we  ↗</a> de volgende instellingen te gebruiken in <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/nl.json b/core/l10n/nl.json
index 7703b19541b..b125f4f17bf 100644
--- a/core/l10n/nl.json
+++ b/core/l10n/nl.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "De reverse proxy headerconfiguratie is onjuist, of je hebt toegang tot Nextcloud via een vertrouwde proxy. Als je Nextcloud niet via een vertrouwde proxy benadert, dan levert dat een beveiligingsrisico op, waardoor een aanvaller het IP-adres dat Nextcloud ziet kan vervalsen. Meer informatie is te vinden in onze <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentatie</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached is geconfigureerd als gedistribueerde cache, maar de verkeerde PHP module \"memcache\" is geïnstalleerd. \\OC\\Memcache\\Memcached ondersteunt alleen \"memcached\" en niet \"memcache\". Zie de <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki over beide modules</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Sommige bestanden kwamen niet door de code betrouwbaarheidscontrole. Meer informatie over het oplossen van dit probleem kan worden gevonden in onze <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentatie</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lijst met ongeldige bestanden…</a> / <a href=\"{rescanEndpoint}\">Opnieuw…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "De PHP Opcache is niet juist geconfigureerd. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Voor betere prestaties adviseren we  ↗</a> de volgende instellingen te gebruiken in <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "De PHP functie \"set_time_limit\" is niet beschikbaar. Dit kan erin resulteren dat de scripts halverwege stoppen, waardoor de installatie ontregeld raakt. We adviseren met klem om deze functie in te schakelen.",
     "Error occurred while checking server setup" : "Een fout trad op bij checken serverconfiguratie",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Je datamap en je bestanden zijn waarschijnlijk vanaf het internet bereikbaar.  Het .htaccess-bestand werkt niet. We raden ten zeerste aan aan om je webserver zodanig te configureren, dat de datadirectory niet bereikbaar is vanaf het internet of om je datadirectory te verplaatsen naar een locatie buiten de document-root van de webserver.",
@@ -125,7 +124,6 @@
     "Expiration" : "Vervaltermijn",
     "Expiration date" : "Vervaldatum",
     "Choose a password for the public link" : "Kies een wachtwoord voor de openbare link",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Kies een wachtwoord voor de openbare link of druk op \"Enter ↵\"",
     "Copied!" : "Gekopieerd!",
     "Copy" : "Kopiëren",
     "Not supported!" : "Niet ondersteund!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Proficiat!",
     "Use the following link to reset your password: {link}" : "Gebruik de volgende link om je wachtwoord te resetten: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Hallo daar,<br><br>%s deelde <strong>%s</strong> met je.<br><a href=\"%s\">Bekijk het hier!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Gebruik de commandoregel updater, omdat je een grote Nextcloud hebt."
+    "Please use the command line updater because you have a big instance." : "Gebruik de commandoregel updater, omdat je een grote Nextcloud hebt.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "De PHP Opcache is niet juist geconfigureerd. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Voor betere prestaties adviseren we  ↗</a> de volgende instellingen te gebruiken in <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/pl.js b/core/l10n/pl.js
index 6f3d9482f03..b4a0151bacf 100644
--- a/core/l10n/pl.js
+++ b/core/l10n/pl.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Konfiguracja nagłówków reverse proxy jest niepoprawna albo łączysz się do Nextclouda przez zaufane proxy. Jeśli nie łączysz się z zaufanego proxy, to jest to problem bezpieczeństwa i atakujący może podszyć się pod adres IP jako widoczny dla Nextclouda. Więcej informacji można znaleźć w naszej <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentacji</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Jako cache jest skonfigurowane \"memcached\", ale błędny moduł PHP \"memcache\" jest zainstalowany. \\OC\\Memcache\\Memcached wspiera tylko \"memcached\", a nie \"memcache\". Sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki o obu tych modułach</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Niektóre pliki nie przeszły sprawdzania spójności. Dalsze informacje jak to naprawić mogą być znalezione w naszej <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentacji</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista niepoprawnych plików...</a> / <a href=\"{rescanEndpoint}\">Skanowanie ponowne…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache nie jest prawidłowo skonfigurowany <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dla lepszej wydajności zalecamy ↗</a> użycie następujących ustawień w <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Funkcja PHP \"set_time_limit\" nie jest dostępna. Może to powodować zatrzymanie skryptów w podczas działania i w efekcie przerwanie instalacji. Silnie rekomendujemy włączenie tej funkcji.",
     "Error occurred while checking server setup" : "Pojawił się błąd podczas sprawdzania ustawień serwera",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Twój katalog z danymi i twoje pliki prawdopodobnie są dostępne przez Internet. Plik .htaccess nie działa. Usilnie zalecamy, żebyś tak skonfigurował swój serwer, żeby katalog z danymi nie był dalej dostępny lub przenieś swój katalog z danymi poza katalog root serwera webowego.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Wygaśnięcie",
     "Expiration date" : "Data wygaśnięcia",
     "Choose a password for the public link" : "Wybierz hasło dla linku publicznego",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Wybierz hasło dla publicznego linka lub wciśnij \"Enter ↵\"",
     "Copied!" : "Skopiowano!",
     "Copy" : "Skopiuj",
     "Not supported!" : "Brak wsparcia!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Pozdrawiam!",
     "Use the following link to reset your password: {link}" : "Użyj tego odnośnika by zresetować hasło: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Witam, <br><br>informuję, że %s udostępnianych zasobów <strong>%s</strong> jest z Tobą.<br><a href=\"%s\">Zobacz!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Ze względu na rozmiar Twojej instalacji użyj programu do aktualizacji z linii poleceń."
+    "Please use the command line updater because you have a big instance." : "Ze względu na rozmiar Twojej instalacji użyj programu do aktualizacji z linii poleceń.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache nie jest prawidłowo skonfigurowany <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dla lepszej wydajności zalecamy ↗</a> użycie następujących ustawień w <code>php.ini</code>:"
 },
 "nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>=14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);");
diff --git a/core/l10n/pl.json b/core/l10n/pl.json
index e15bdf4155d..f3da3507e1b 100644
--- a/core/l10n/pl.json
+++ b/core/l10n/pl.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Konfiguracja nagłówków reverse proxy jest niepoprawna albo łączysz się do Nextclouda przez zaufane proxy. Jeśli nie łączysz się z zaufanego proxy, to jest to problem bezpieczeństwa i atakujący może podszyć się pod adres IP jako widoczny dla Nextclouda. Więcej informacji można znaleźć w naszej <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentacji</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Jako cache jest skonfigurowane \"memcached\", ale błędny moduł PHP \"memcache\" jest zainstalowany. \\OC\\Memcache\\Memcached wspiera tylko \"memcached\", a nie \"memcache\". Sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki o obu tych modułach</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Niektóre pliki nie przeszły sprawdzania spójności. Dalsze informacje jak to naprawić mogą być znalezione w naszej <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">dokumentacji</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista niepoprawnych plików...</a> / <a href=\"{rescanEndpoint}\">Skanowanie ponowne…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache nie jest prawidłowo skonfigurowany <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dla lepszej wydajności zalecamy ↗</a> użycie następujących ustawień w <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Funkcja PHP \"set_time_limit\" nie jest dostępna. Może to powodować zatrzymanie skryptów w podczas działania i w efekcie przerwanie instalacji. Silnie rekomendujemy włączenie tej funkcji.",
     "Error occurred while checking server setup" : "Pojawił się błąd podczas sprawdzania ustawień serwera",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Twój katalog z danymi i twoje pliki prawdopodobnie są dostępne przez Internet. Plik .htaccess nie działa. Usilnie zalecamy, żebyś tak skonfigurował swój serwer, żeby katalog z danymi nie był dalej dostępny lub przenieś swój katalog z danymi poza katalog root serwera webowego.",
@@ -125,7 +124,6 @@
     "Expiration" : "Wygaśnięcie",
     "Expiration date" : "Data wygaśnięcia",
     "Choose a password for the public link" : "Wybierz hasło dla linku publicznego",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Wybierz hasło dla publicznego linka lub wciśnij \"Enter ↵\"",
     "Copied!" : "Skopiowano!",
     "Copy" : "Skopiuj",
     "Not supported!" : "Brak wsparcia!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Pozdrawiam!",
     "Use the following link to reset your password: {link}" : "Użyj tego odnośnika by zresetować hasło: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Witam, <br><br>informuję, że %s udostępnianych zasobów <strong>%s</strong> jest z Tobą.<br><a href=\"%s\">Zobacz!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Ze względu na rozmiar Twojej instalacji użyj programu do aktualizacji z linii poleceń."
+    "Please use the command line updater because you have a big instance." : "Ze względu na rozmiar Twojej instalacji użyj programu do aktualizacji z linii poleceń.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache nie jest prawidłowo skonfigurowany <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Dla lepszej wydajności zalecamy ↗</a> użycie następujących ustawień w <code>php.ini</code>:"
 },"pluralForm" :"nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>=14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);"
 }
\ No newline at end of file
diff --git a/core/l10n/pt_BR.js b/core/l10n/pt_BR.js
index d05622d9f05..1b50561813d 100644
--- a/core/l10n/pt_BR.js
+++ b/core/l10n/pt_BR.js
@@ -56,7 +56,7 @@ OC.L10N.register(
     "Already up to date" : "Já está atualizado",
     "No contacts found" : "Nenhum contato encontrado",
     "Show all contacts …" : "Mostrar todos os contatos...",
-    "There was an error loading your contacts" : "Houve um erro carregando seus contatos",
+    "There was an error loading your contacts" : "Erro ao carregar seus contatos",
     "Loading your contacts …" : "Carregando seus contatos...",
     "Looking for {term} …" : "Procurando por {term}…",
     "<a href=\"{docUrl}\">There were problems with the code integrity check. More information…</a>" : "<a href=\"{docUrl}\">Houve problemas com a verificação de integridade do código. Mais informações…</a>",
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "O cabeçalho do proxy reverso está incorreto, ou você está acessando a partir de um proxy confiável. Se você não está usando um proxy confiável, há uma falha de segurança que pode permitir um ataque. Mais informação pode ser encontrada na nossa <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurado como cache distribuído, mas o módulo PHP errado \"memcache\" está instalado. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". Veja a <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki memcached sobre ambos os módulos </a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver este problema pode ser encontrado em nossa <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista de arquivos inválidos…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "O Opcache do PHP não está configurado corretamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho recomendamos ↗</a> usar as seguintes configurações no <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar em scripts pendurados durante a execução e prejudicando sua instalação. Sugerimos fortemente habilitar esta função.",
     "Error occurred while checking server setup" : "Erro ao verificar a configuração do servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Seu diretório de dados e arquivos provavelmente estão acessíveis via internet. O arquivo .htaccess não está funcionando. É altamente recomendado que você configure seu servidor web de maneira que o diretório de dados não seja mais acessível ou mova-o para fora do diretório raiz do servidor web.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Expiração",
     "Expiration date" : "Data de expiração",
     "Choose a password for the public link" : "Escolha uma senha para o link público",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Escolha uma senha para o link público ou pressione \"Enter ↵\"",
     "Copied!" : "Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "Não suportado!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Saudações!",
     "Use the following link to reset your password: {link}" : "Use o seguinte link para redefinir sua senha: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Olá,<br><br>só para avisar que %s compartilhou <strong>%s</strong> com você. <br><a href=\"%s\">Visualize-o!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Por favor, use a atualização de linha de comando, porque você tem muitos dados em sua instância."
+    "Please use the command line updater because you have a big instance." : "Por favor, use a atualização de linha de comando, porque você tem muitos dados em sua instância.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "O Opcache do PHP não está configurado corretamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho recomendamos ↗</a> usar as seguintes configurações no <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/core/l10n/pt_BR.json b/core/l10n/pt_BR.json
index da6d41279b3..0171b2e60f6 100644
--- a/core/l10n/pt_BR.json
+++ b/core/l10n/pt_BR.json
@@ -54,7 +54,7 @@
     "Already up to date" : "Já está atualizado",
     "No contacts found" : "Nenhum contato encontrado",
     "Show all contacts …" : "Mostrar todos os contatos...",
-    "There was an error loading your contacts" : "Houve um erro carregando seus contatos",
+    "There was an error loading your contacts" : "Erro ao carregar seus contatos",
     "Loading your contacts …" : "Carregando seus contatos...",
     "Looking for {term} …" : "Procurando por {term}…",
     "<a href=\"{docUrl}\">There were problems with the code integrity check. More information…</a>" : "<a href=\"{docUrl}\">Houve problemas com a verificação de integridade do código. Mais informações…</a>",
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "O cabeçalho do proxy reverso está incorreto, ou você está acessando a partir de um proxy confiável. Se você não está usando um proxy confiável, há uma falha de segurança que pode permitir um ataque. Mais informação pode ser encontrada na nossa <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurado como cache distribuído, mas o módulo PHP errado \"memcache\" está instalado. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". Veja a <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki memcached sobre ambos os módulos </a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver este problema pode ser encontrado em nossa <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista de arquivos inválidos…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "O Opcache do PHP não está configurado corretamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho recomendamos ↗</a> usar as seguintes configurações no <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar em scripts pendurados durante a execução e prejudicando sua instalação. Sugerimos fortemente habilitar esta função.",
     "Error occurred while checking server setup" : "Erro ao verificar a configuração do servidor",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Seu diretório de dados e arquivos provavelmente estão acessíveis via internet. O arquivo .htaccess não está funcionando. É altamente recomendado que você configure seu servidor web de maneira que o diretório de dados não seja mais acessível ou mova-o para fora do diretório raiz do servidor web.",
@@ -125,7 +124,6 @@
     "Expiration" : "Expiração",
     "Expiration date" : "Data de expiração",
     "Choose a password for the public link" : "Escolha uma senha para o link público",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Escolha uma senha para o link público ou pressione \"Enter ↵\"",
     "Copied!" : "Copiado!",
     "Copy" : "Copiar",
     "Not supported!" : "Não suportado!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Saudações!",
     "Use the following link to reset your password: {link}" : "Use o seguinte link para redefinir sua senha: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Olá,<br><br>só para avisar que %s compartilhou <strong>%s</strong> com você. <br><a href=\"%s\">Visualize-o!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Por favor, use a atualização de linha de comando, porque você tem muitos dados em sua instância."
+    "Please use the command line updater because you have a big instance." : "Por favor, use a atualização de linha de comando, porque você tem muitos dados em sua instância.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "O Opcache do PHP não está configurado corretamente. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho recomendamos ↗</a> usar as seguintes configurações no <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/pt_PT.js b/core/l10n/pt_PT.js
index 3d70c15bd55..d49d71ad28c 100644
--- a/core/l10n/pt_PT.js
+++ b/core/l10n/pt_PT.js
@@ -95,7 +95,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "A configuração de cabeçalhos de proxy reverso está incorrecta ou está a aceder a Nextcloud a partir de um proxy confiável. Se não estiver a aceder a Nextcloud a partir de um proxy confiável, isso é um problema de segurança e pode permitir que um invasor falsifique o endereço IP como visível para o Nextcloud. Mais informação nesta <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurada como cache distribuída, mas o módulo \"memcache\" PHP errado está instalado. \\OC\\Memcache\\Memcached apenas suporta \"memcached\" e não \"memcache\". Leia a <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki sobre ambos os módulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Alguns ficheiros não passaram na verificação de integridade. Mais informação sobre este assunto pode ser encontrada na nossa <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista de ficheiros inválidos…</a> / <a href=\"{rescanEndpoint}\">Reverificar…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache não está devidamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho, recomenda-se ↗</a> usar as seguintes configurações no <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar na paragem dos scripts a meio da execução, impedindo a instalação. Recomenda-se vivamente activar esta função.",
     "Error occurred while checking server setup" : "Ocorreu um erro durante a verificação da configuração do servidor",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "O cabeçalho HTTP \"{header}\" não está configurado para igualar \"{expected}\". Isto é um potencial risco de segurança ou privacidade e recomendamos que o corrija.",
@@ -304,6 +303,7 @@ OC.L10N.register(
     "Cheers!" : "Parabéns!",
     "Use the following link to reset your password: {link}" : "Utilize a seguinte hiperligação para repor a sua palavra-passe: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Olá,<br><br>apenas para informar que %s partilhou <strong>%s</strong> consigo.<br><a href=\"%s\">Consulte aqui!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Por favor, utilize o atualizador de linha de comando porque a sua instância é grande."
+    "Please use the command line updater because you have a big instance." : "Por favor, utilize o atualizador de linha de comando porque a sua instância é grande.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache não está devidamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho, recomenda-se ↗</a> usar as seguintes configurações no <code>php.ini</code>:"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/core/l10n/pt_PT.json b/core/l10n/pt_PT.json
index 52074281b2b..225dfcebb5c 100644
--- a/core/l10n/pt_PT.json
+++ b/core/l10n/pt_PT.json
@@ -93,7 +93,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "A configuração de cabeçalhos de proxy reverso está incorrecta ou está a aceder a Nextcloud a partir de um proxy confiável. Se não estiver a aceder a Nextcloud a partir de um proxy confiável, isso é um problema de segurança e pode permitir que um invasor falsifique o endereço IP como visível para o Nextcloud. Mais informação nesta <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached está configurada como cache distribuída, mas o módulo \"memcache\" PHP errado está instalado. \\OC\\Memcache\\Memcached apenas suporta \"memcached\" e não \"memcache\". Leia a <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki sobre ambos os módulos</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Alguns ficheiros não passaram na verificação de integridade. Mais informação sobre este assunto pode ser encontrada na nossa <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentação</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista de ficheiros inválidos…</a> / <a href=\"{rescanEndpoint}\">Reverificar…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache não está devidamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho, recomenda-se ↗</a> usar as seguintes configurações no <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar na paragem dos scripts a meio da execução, impedindo a instalação. Recomenda-se vivamente activar esta função.",
     "Error occurred while checking server setup" : "Ocorreu um erro durante a verificação da configuração do servidor",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "O cabeçalho HTTP \"{header}\" não está configurado para igualar \"{expected}\". Isto é um potencial risco de segurança ou privacidade e recomendamos que o corrija.",
@@ -302,6 +301,7 @@
     "Cheers!" : "Parabéns!",
     "Use the following link to reset your password: {link}" : "Utilize a seguinte hiperligação para repor a sua palavra-passe: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Olá,<br><br>apenas para informar que %s partilhou <strong>%s</strong> consigo.<br><a href=\"%s\">Consulte aqui!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Por favor, utilize o atualizador de linha de comando porque a sua instância é grande."
+    "Please use the command line updater because you have a big instance." : "Por favor, utilize o atualizador de linha de comando porque a sua instância é grande.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache não está devidamente configurado. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Para um melhor desempenho, recomenda-se ↗</a> usar as seguintes configurações no <code>php.ini</code>:"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/ro.js b/core/l10n/ro.js
index 9d954c0418b..4e4348e36e3 100644
--- a/core/l10n/ro.js
+++ b/core/l10n/ro.js
@@ -95,7 +95,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Configurarea headerelor pentru <i>reverse proxy</i> sunt incorecte, sau accesezi Nextcloud printr-un proxy de încredere. Dacă nu accesezi Nextcloud printr-un proxy de încredere, aceasta este o problemă de securitate și poate permite unui atacator mascarea adresei IP vizibile pentru Nextcloud. Mai multe informații pot fi găsite în <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentație</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached este configurat ca și cache distribuit, dar este instalat un modul PHP greșit pentru ”memcache”. \\OC\\Memcache\\Memcached suportă numai ”memcached” și nu ”memcache”. Vezi și <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki-ul memcached despre ambele module</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Unele fișiere nu au trecut de verificarea de integritate. Mai multe informații despre cum se rezolvă această problemă pot fi găsite în <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentație</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista fișierelor non-valide…</a> / <a href=\"{rescanEndpoint}\">Rescanează…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Modulul PHP Opcache nu este configurat corespunzător. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pentru performanțe îmbunătățite recomandăm ↗</a> utilizarea următoarelor configurări în <code>php.ini</code>:",
     "Error occurred while checking server setup" : "A apărut o eroare la verificarea configurației serverului",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "Header-ul HTTP ”{header}” nu este configurat să fie identic cu \"{expected}\". Aceasta reprezintă un potențial risc de securitate sau de confidențialitate și recomandăm modificarea corespunzătoare a acestei setări.",
     "The \"Strict-Transport-Security\" HTTP header is not configured to at least \"{seconds}\" seconds. For enhanced security we recommend enabling HSTS as described in our <a href=\"{docUrl}\" rel=\"noreferrer\">security tips</a>." : "Header-ul HTTP \"Strict-Transport-Security\" nu este configurat cu cel puțin \"{seconds}\" secunde. Pentru o securitate îmbunătățită recomandăm activarea HSTS așa cum este descris în <a href=\"{docUrl}\" rel=\"noreferrer\">sfaturile de securitate</a>.",
@@ -290,6 +289,7 @@ OC.L10N.register(
     "Cheers!" : "Noroc!",
     "Use the following link to reset your password: {link}" : "Folosește următorul link pentru a reseta parola: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Salutare,<br><br>te anunțăm pe această cale că %s a partajat <strong>%s</strong> cu tine.<br><a href=\"%s\">Accesează!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Folosește actualizarea din linia de comandă deoarece ai o instanță mare."
+    "Please use the command line updater because you have a big instance." : "Folosește actualizarea din linia de comandă deoarece ai o instanță mare.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Modulul PHP Opcache nu este configurat corespunzător. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pentru performanțe îmbunătățite recomandăm ↗</a> utilizarea următoarelor configurări în <code>php.ini</code>:"
 },
 "nplurals=3; plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?2:1));");
diff --git a/core/l10n/ro.json b/core/l10n/ro.json
index ba523f36f21..cbf4f7ce9ae 100644
--- a/core/l10n/ro.json
+++ b/core/l10n/ro.json
@@ -93,7 +93,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Configurarea headerelor pentru <i>reverse proxy</i> sunt incorecte, sau accesezi Nextcloud printr-un proxy de încredere. Dacă nu accesezi Nextcloud printr-un proxy de încredere, aceasta este o problemă de securitate și poate permite unui atacator mascarea adresei IP vizibile pentru Nextcloud. Mai multe informații pot fi găsite în <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentație</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached este configurat ca și cache distribuit, dar este instalat un modul PHP greșit pentru ”memcache”. \\OC\\Memcache\\Memcached suportă numai ”memcached” și nu ”memcache”. Vezi și <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki-ul memcached despre ambele module</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Unele fișiere nu au trecut de verificarea de integritate. Mai multe informații despre cum se rezolvă această problemă pot fi găsite în <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentație</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Lista fișierelor non-valide…</a> / <a href=\"{rescanEndpoint}\">Rescanează…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Modulul PHP Opcache nu este configurat corespunzător. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pentru performanțe îmbunătățite recomandăm ↗</a> utilizarea următoarelor configurări în <code>php.ini</code>:",
     "Error occurred while checking server setup" : "A apărut o eroare la verificarea configurației serverului",
     "The \"{header}\" HTTP header is not configured to equal to \"{expected}\". This is a potential security or privacy risk and we recommend adjusting this setting." : "Header-ul HTTP ”{header}” nu este configurat să fie identic cu \"{expected}\". Aceasta reprezintă un potențial risc de securitate sau de confidențialitate și recomandăm modificarea corespunzătoare a acestei setări.",
     "The \"Strict-Transport-Security\" HTTP header is not configured to at least \"{seconds}\" seconds. For enhanced security we recommend enabling HSTS as described in our <a href=\"{docUrl}\" rel=\"noreferrer\">security tips</a>." : "Header-ul HTTP \"Strict-Transport-Security\" nu este configurat cu cel puțin \"{seconds}\" secunde. Pentru o securitate îmbunătățită recomandăm activarea HSTS așa cum este descris în <a href=\"{docUrl}\" rel=\"noreferrer\">sfaturile de securitate</a>.",
@@ -288,6 +287,7 @@
     "Cheers!" : "Noroc!",
     "Use the following link to reset your password: {link}" : "Folosește următorul link pentru a reseta parola: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Salutare,<br><br>te anunțăm pe această cale că %s a partajat <strong>%s</strong> cu tine.<br><a href=\"%s\">Accesează!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Folosește actualizarea din linia de comandă deoarece ai o instanță mare."
+    "Please use the command line updater because you have a big instance." : "Folosește actualizarea din linia de comandă deoarece ai o instanță mare.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "Modulul PHP Opcache nu este configurat corespunzător. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Pentru performanțe îmbunătățite recomandăm ↗</a> utilizarea următoarelor configurări în <code>php.ini</code>:"
 },"pluralForm" :"nplurals=3; plural=(n==1?0:(((n%100>19)||((n%100==0)&&(n!=0)))?2:1));"
 }
\ No newline at end of file
diff --git a/core/l10n/ru.js b/core/l10n/ru.js
index aa49ea89dff..32b8bd28fd5 100644
--- a/core/l10n/ru.js
+++ b/core/l10n/ru.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Заголовки обратного прокси настроены неправильно, либо вы пытаетесь получить доступ к NextCloud через доверенный прокси. Если NextCloud открыт не через доверенный прокси, это проблема безопасности, которая может позволить атакующему подделать IP-адрес, который видит NextCloud. Для получения дополнительной информации смотрите нашу <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">документацию</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached настроен на распределенный кеш, но установлен не поддерживаемый модуль PHP \"memcache\". \\OC\\Memcache\\Memcached поддерживает только модуль \"memcached\", но не \"memcache\". Больше информации на <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki странице memcached о обоих модулях</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Некоторые файлы не прошли проверку целостности. Дополнительная информация о том, как устранить данную проблему доступна в нашей <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">документации</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Список проблемных файлов…</a> / <a href=\"{rescanEndpoint}\">Сканировать ещё раз…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache не настроен правильно. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Для обеспечения лучшей производительности рекомендуется ↗</a> использовать следующие настройки в <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Функция PHP «set_time_limit» недоступна. В случае остановки скриптов во время работы, это может привести к повреждению установки. Настойчиво рекомендуется включить эту функция. ",
     "Error occurred while checking server setup" : "Произошла ошибка при проверке настроек сервера",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Ваш каталог данных и ваши файлы возможно доступны из Интернета. Файл .htaccess не работает. Настоятельно рекомендуется настроить веб сервер таким образом, чтобы каталог данных не был больше доступен или переместить каталог данных за пределы корня веб-сервера.Save",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Срок действия",
     "Expiration date" : "Дата окончания",
     "Choose a password for the public link" : "Укажите пароль для общедоступной ссылки",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Укажите пароль для общедоступной ссылки или нажмите «Ввод ↵»",
     "Copied!" : "Скопировано!",
     "Copy" : "Копировать",
     "Not supported!" : "Не поддерживается!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Всего наилучшего!",
     "Use the following link to reset your password: {link}" : "Используйте следующую ссылку чтобы сбросить пароль: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Здравствуйте,<br><br>%s поделился с вами <strong>%s</strong>.<br>Перейдите по <a href=\"%s\">ссылке</a>, чтобы посмотреть<br><br>",
-    "Please use the command line updater because you have a big instance." : "Пожалуйста, используйте обновление через командную строку, так как данная установка имеет большой размер."
+    "Please use the command line updater because you have a big instance." : "Пожалуйста, используйте обновление через командную строку, так как данная установка имеет большой размер.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache не настроен правильно. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Для обеспечения лучшей производительности рекомендуется ↗</a> использовать следующие настройки в <code>php.ini</code>:"
 },
 "nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);");
diff --git a/core/l10n/ru.json b/core/l10n/ru.json
index 65a37a4631c..484b619d955 100644
--- a/core/l10n/ru.json
+++ b/core/l10n/ru.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Заголовки обратного прокси настроены неправильно, либо вы пытаетесь получить доступ к NextCloud через доверенный прокси. Если NextCloud открыт не через доверенный прокси, это проблема безопасности, которая может позволить атакующему подделать IP-адрес, который видит NextCloud. Для получения дополнительной информации смотрите нашу <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">документацию</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached настроен на распределенный кеш, но установлен не поддерживаемый модуль PHP \"memcache\". \\OC\\Memcache\\Memcached поддерживает только модуль \"memcached\", но не \"memcache\". Больше информации на <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">wiki странице memcached о обоих модулях</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Некоторые файлы не прошли проверку целостности. Дополнительная информация о том, как устранить данную проблему доступна в нашей <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">документации</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">Список проблемных файлов…</a> / <a href=\"{rescanEndpoint}\">Сканировать ещё раз…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache не настроен правильно. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Для обеспечения лучшей производительности рекомендуется ↗</a> использовать следующие настройки в <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Функция PHP «set_time_limit» недоступна. В случае остановки скриптов во время работы, это может привести к повреждению установки. Настойчиво рекомендуется включить эту функция. ",
     "Error occurred while checking server setup" : "Произошла ошибка при проверке настроек сервера",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Ваш каталог данных и ваши файлы возможно доступны из Интернета. Файл .htaccess не работает. Настоятельно рекомендуется настроить веб сервер таким образом, чтобы каталог данных не был больше доступен или переместить каталог данных за пределы корня веб-сервера.Save",
@@ -125,7 +124,6 @@
     "Expiration" : "Срок действия",
     "Expiration date" : "Дата окончания",
     "Choose a password for the public link" : "Укажите пароль для общедоступной ссылки",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Укажите пароль для общедоступной ссылки или нажмите «Ввод ↵»",
     "Copied!" : "Скопировано!",
     "Copy" : "Копировать",
     "Not supported!" : "Не поддерживается!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Всего наилучшего!",
     "Use the following link to reset your password: {link}" : "Используйте следующую ссылку чтобы сбросить пароль: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Здравствуйте,<br><br>%s поделился с вами <strong>%s</strong>.<br>Перейдите по <a href=\"%s\">ссылке</a>, чтобы посмотреть<br><br>",
-    "Please use the command line updater because you have a big instance." : "Пожалуйста, используйте обновление через командную строку, так как данная установка имеет большой размер."
+    "Please use the command line updater because you have a big instance." : "Пожалуйста, используйте обновление через командную строку, так как данная установка имеет большой размер.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP OPcache не настроен правильно. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Для обеспечения лучшей производительности рекомендуется ↗</a> использовать следующие настройки в <code>php.ini</code>:"
 },"pluralForm" :"nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);"
 }
\ No newline at end of file
diff --git a/core/l10n/sv.js b/core/l10n/sv.js
index a1844671a55..721d811bb9e 100644
--- a/core/l10n/sv.js
+++ b/core/l10n/sv.js
@@ -123,7 +123,6 @@ OC.L10N.register(
     "Expiration" : "Upphör",
     "Expiration date" : "Utgångsdatum",
     "Choose a password for the public link" : "Välj ett lösenord för den offentliga länken",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Välj ett lösenord för offentlig delning eller tryck \"Enter ↵\"",
     "Copied!" : "Kopierad!",
     "Copy" : "Kopiera",
     "Not supported!" : "Stöds ej!",
diff --git a/core/l10n/sv.json b/core/l10n/sv.json
index 7073ca809c8..86780bcd830 100644
--- a/core/l10n/sv.json
+++ b/core/l10n/sv.json
@@ -121,7 +121,6 @@
     "Expiration" : "Upphör",
     "Expiration date" : "Utgångsdatum",
     "Choose a password for the public link" : "Välj ett lösenord för den offentliga länken",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Välj ett lösenord för offentlig delning eller tryck \"Enter ↵\"",
     "Copied!" : "Kopierad!",
     "Copy" : "Kopiera",
     "Not supported!" : "Stöds ej!",
diff --git a/core/l10n/tr.js b/core/l10n/tr.js
index f9c52ce5f88..f7e7e1f06d3 100644
--- a/core/l10n/tr.js
+++ b/core/l10n/tr.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Ters vekil sunucu üst bilgi yapılandırmanız doğru değil ya da Nextcloud üzerine güvenilen bir vekil sunucudan erişiyorsunuz. Nextcloud üzerine güvenilen bir vekil sunucudan erişmiyorsanız bu bir güvenlik sorunudur ve bir saldırganın IP adresini farklıymış gibi göstermesine izin verebilir. Ayrıntlı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">belgelere</a> bakabilirsiniz.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached dağıtık bellek olarak yapılandırılmış ancak kurulmuş PHP \"memcache\" modülü yanlış. \\OC\\Memcache\\Memcached yalnız \"memcache\" modülünü değil \"memcached\" mdoülünü destekler. İki modül hakkında ayrıntılı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki sayfasına</a> bakabilirsiniz.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Bazı dosyalar bütünlük denetiminden geçemedi. Bu sorunun çözümü ile ilgili bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">belgelere</a> bakabilirsiniz. (<a href=\"{codeIntegrityDownloadEndpoint}\">Geçersiz dosyaların listesi…</a> / <a href=\"{rescanEndpoint}\">Yeniden Tara…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache doğru şekilde ayarlanmamış. Daha iyi sonuç almak için  <code>php.ini</code> dosyasında <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">şu ayarların kullanılması önerilir ↗</a>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "\"set_time_limit\" PHP işlevi kullanılamıyor. Bu durum betiklerin yürütme sırasında durmasına, ve kurulumunuzun çalışmamasına neden olabilir. Bu işlevi etkinleştirmeniz önemle önerilir.",
     "Error occurred while checking server setup" : "Sunucu ayarları denetlenirken bir sorun çıktı",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Veri klasörünüz ve dosyalarınız İnternet üzerinden erişime açık olabilir. .htaccess dosyası çalışmıyor. Web sunucunuzu yapılandırarak veri klasörüne erişimi engellemeniz ya da veri klasörünü web sunucu kök klasörü dışına taşımanız önemle önerilir.",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "Son kullanma",
     "Expiration date" : "Son kullanma tarihi",
     "Choose a password for the public link" : "Herkese açık bağlantı için bir parola seçin",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Herkese açık bağlantı için bir parola belirtin ya da \"Enter ↵\" tuşuna basın",
     "Copied!" : "Kopyalandı!",
     "Copy" : "Kopyala",
     "Not supported!" : "Desteklenmiyor!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "Hoşça kalın!",
     "Use the following link to reset your password: {link}" : "Parolanızı sıfırlamak için şu bağlantıyı kullanın: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Merhaba, <br><br>%s kullanıcısının sizinle <strong>%s</strong> paylaşımında bulunduğunu bildirmek istedik.<br><a href=\"%s\">Paylaşımı şuradan görebilirsiniz!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Kopyanız oldukça büyük olduğundan güncelleme için komut satırını kullanın."
+    "Please use the command line updater because you have a big instance." : "Kopyanız oldukça büyük olduğundan güncelleme için komut satırını kullanın.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache doğru şekilde ayarlanmamış. Daha iyi sonuç almak için  <code>php.ini</code> dosyasında <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">şu ayarların kullanılması önerilir ↗</a>:"
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/core/l10n/tr.json b/core/l10n/tr.json
index 137b7fa1c82..a6923698e7e 100644
--- a/core/l10n/tr.json
+++ b/core/l10n/tr.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Ters vekil sunucu üst bilgi yapılandırmanız doğru değil ya da Nextcloud üzerine güvenilen bir vekil sunucudan erişiyorsunuz. Nextcloud üzerine güvenilen bir vekil sunucudan erişmiyorsanız bu bir güvenlik sorunudur ve bir saldırganın IP adresini farklıymış gibi göstermesine izin verebilir. Ayrıntlı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">belgelere</a> bakabilirsiniz.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached dağıtık bellek olarak yapılandırılmış ancak kurulmuş PHP \"memcache\" modülü yanlış. \\OC\\Memcache\\Memcached yalnız \"memcache\" modülünü değil \"memcached\" mdoülünü destekler. İki modül hakkında ayrıntılı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki sayfasına</a> bakabilirsiniz.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Bazı dosyalar bütünlük denetiminden geçemedi. Bu sorunun çözümü ile ilgili bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">belgelere</a> bakabilirsiniz. (<a href=\"{codeIntegrityDownloadEndpoint}\">Geçersiz dosyaların listesi…</a> / <a href=\"{rescanEndpoint}\">Yeniden Tara…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache doğru şekilde ayarlanmamış. Daha iyi sonuç almak için  <code>php.ini</code> dosyasında <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">şu ayarların kullanılması önerilir ↗</a>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "\"set_time_limit\" PHP işlevi kullanılamıyor. Bu durum betiklerin yürütme sırasında durmasına, ve kurulumunuzun çalışmamasına neden olabilir. Bu işlevi etkinleştirmeniz önemle önerilir.",
     "Error occurred while checking server setup" : "Sunucu ayarları denetlenirken bir sorun çıktı",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Veri klasörünüz ve dosyalarınız İnternet üzerinden erişime açık olabilir. .htaccess dosyası çalışmıyor. Web sunucunuzu yapılandırarak veri klasörüne erişimi engellemeniz ya da veri klasörünü web sunucu kök klasörü dışına taşımanız önemle önerilir.",
@@ -125,7 +124,6 @@
     "Expiration" : "Son kullanma",
     "Expiration date" : "Son kullanma tarihi",
     "Choose a password for the public link" : "Herkese açık bağlantı için bir parola seçin",
-    "Choose a password for the public link or press \"Enter ↵\"" : "Herkese açık bağlantı için bir parola belirtin ya da \"Enter ↵\" tuşuna basın",
     "Copied!" : "Kopyalandı!",
     "Copy" : "Kopyala",
     "Not supported!" : "Desteklenmiyor!",
@@ -337,6 +335,7 @@
     "Cheers!" : "Hoşça kalın!",
     "Use the following link to reset your password: {link}" : "Parolanızı sıfırlamak için şu bağlantıyı kullanın: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Merhaba, <br><br>%s kullanıcısının sizinle <strong>%s</strong> paylaşımında bulunduğunu bildirmek istedik.<br><a href=\"%s\">Paylaşımı şuradan görebilirsiniz!</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Kopyanız oldukça büyük olduğundan güncelleme için komut satırını kullanın."
+    "Please use the command line updater because you have a big instance." : "Kopyanız oldukça büyük olduğundan güncelleme için komut satırını kullanın.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache doğru şekilde ayarlanmamış. Daha iyi sonuç almak için  <code>php.ini</code> dosyasında <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">şu ayarların kullanılması önerilir ↗</a>:"
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/core/l10n/vi.js b/core/l10n/vi.js
index abc3e14eaa5..74774bd95b3 100644
--- a/core/l10n/vi.js
+++ b/core/l10n/vi.js
@@ -110,7 +110,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Phần cấu hình các headers của proxy trỏ ngược không chính xác hoặc bạn đang truy cập Nextcloud từ một proxy đáng tin. Nếu bạn không thể truy cập được từ một proxy dáng tin cậy,  thì dẫn tới vấn đề về mất an toàn thông tin và kẻ tấn công có thể giả mạo IP chúng để truy cập Nextcloud. Thông tin chi tiết có thể được tìm thấy trong  <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Tài liệu</a> của chúng tôi. ",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached được cấu hình dưới dạng cache phân tán, nhưng mô đun PHP \"memcache\" được cài đặt trên hệ thống không hợp lệ.. \\OC\\Memcache\\Memcached chỉ hỗ trợ \"memcached\" chứ không phải \"memcache\". Xin vui lòng xem tài liệu <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Một số file không qua được quá trình kiểm tra tính toàn vẹn.  Thông tin thêm về cách xử lý vấn đề này có thể được tìm thấy trong <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Tài liệu </a> của chúng tôi. (<a href=\"{codeIntegrityDownloadEndpoint}\">Danh sách các file không hợp lệ…</a> / <a href=\"{rescanEndpoint}\">Rà quét lại…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache không được cấu hình đúng. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Để đạt hiệu suất tốt hơn, chúng tôi khuyên bạn ↗</a>nên sử dụng các cài đặt sau trong <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Chức năng PHP \"set_time_limit\" không khả dụng. Điều này có thể dẫn đến việc các tập lệnh bị tạm dừng giữa chừng khi thực hiện, phá vỡ cài đặt của bạn. Chúng tôi thực sự khuyên bạn nên bật chức năng này.",
     "Error occurred while checking server setup" : "Có lỗi xảy ra khi kiểm tra thiết lập máy chủ",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Thư mục chứa dữ liệu và các tệp của bạn có thể truy cập được từ Internet. Vì tệp .htaccess không hoạt động. Chúng tôi khuyên bạn nên định cấu hình máy chủ web theo cách mà thư mục dữ liệu không có thể truy cập được hoặc bạn di chuyển thư mục dữ liệu ra bên ngoài thư mục gốc của máy chủ web.",
@@ -319,6 +318,7 @@ OC.L10N.register(
     "Cheers!" : "Chúc mừng!",
     "Use the following link to reset your password: {link}" : "Dùng đường dẫn sau để khôi phục lại mật khẩu : {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Xin chào, <br><br>  báo cho bạn biết rằng %s đã chia sẽ  %s  với bạn. <br> <a href=\"%s\"> Xem </a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Hãy sử dụng dòng lệnh để cập nhật bởi vì bạn có một hệ thống lớn."
+    "Please use the command line updater because you have a big instance." : "Hãy sử dụng dòng lệnh để cập nhật bởi vì bạn có một hệ thống lớn.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache không được cấu hình đúng. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Để đạt hiệu suất tốt hơn, chúng tôi khuyên bạn ↗</a>nên sử dụng các cài đặt sau trong <code>php.ini</code>:"
 },
 "nplurals=1; plural=0;");
diff --git a/core/l10n/vi.json b/core/l10n/vi.json
index 083eb965705..f6497bd0ecb 100644
--- a/core/l10n/vi.json
+++ b/core/l10n/vi.json
@@ -108,7 +108,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "Phần cấu hình các headers của proxy trỏ ngược không chính xác hoặc bạn đang truy cập Nextcloud từ một proxy đáng tin. Nếu bạn không thể truy cập được từ một proxy dáng tin cậy,  thì dẫn tới vấn đề về mất an toàn thông tin và kẻ tấn công có thể giả mạo IP chúng để truy cập Nextcloud. Thông tin chi tiết có thể được tìm thấy trong  <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Tài liệu</a> của chúng tôi. ",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached được cấu hình dưới dạng cache phân tán, nhưng mô đun PHP \"memcache\" được cài đặt trên hệ thống không hợp lệ.. \\OC\\Memcache\\Memcached chỉ hỗ trợ \"memcached\" chứ không phải \"memcache\". Xin vui lòng xem tài liệu <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "Một số file không qua được quá trình kiểm tra tính toàn vẹn.  Thông tin thêm về cách xử lý vấn đề này có thể được tìm thấy trong <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Tài liệu </a> của chúng tôi. (<a href=\"{codeIntegrityDownloadEndpoint}\">Danh sách các file không hợp lệ…</a> / <a href=\"{rescanEndpoint}\">Rà quét lại…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache không được cấu hình đúng. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Để đạt hiệu suất tốt hơn, chúng tôi khuyên bạn ↗</a>nên sử dụng các cài đặt sau trong <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "Chức năng PHP \"set_time_limit\" không khả dụng. Điều này có thể dẫn đến việc các tập lệnh bị tạm dừng giữa chừng khi thực hiện, phá vỡ cài đặt của bạn. Chúng tôi thực sự khuyên bạn nên bật chức năng này.",
     "Error occurred while checking server setup" : "Có lỗi xảy ra khi kiểm tra thiết lập máy chủ",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "Thư mục chứa dữ liệu và các tệp của bạn có thể truy cập được từ Internet. Vì tệp .htaccess không hoạt động. Chúng tôi khuyên bạn nên định cấu hình máy chủ web theo cách mà thư mục dữ liệu không có thể truy cập được hoặc bạn di chuyển thư mục dữ liệu ra bên ngoài thư mục gốc của máy chủ web.",
@@ -317,6 +316,7 @@
     "Cheers!" : "Chúc mừng!",
     "Use the following link to reset your password: {link}" : "Dùng đường dẫn sau để khôi phục lại mật khẩu : {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "Xin chào, <br><br>  báo cho bạn biết rằng %s đã chia sẽ  %s  với bạn. <br> <a href=\"%s\"> Xem </a><br><br>",
-    "Please use the command line updater because you have a big instance." : "Hãy sử dụng dòng lệnh để cập nhật bởi vì bạn có một hệ thống lớn."
+    "Please use the command line updater because you have a big instance." : "Hãy sử dụng dòng lệnh để cập nhật bởi vì bạn có một hệ thống lớn.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP Opcache không được cấu hình đúng. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">Để đạt hiệu suất tốt hơn, chúng tôi khuyên bạn ↗</a>nên sử dụng các cài đặt sau trong <code>php.ini</code>:"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/core/l10n/zh_CN.js b/core/l10n/zh_CN.js
index 47a4bb10e0f..74dd65cbffd 100644
--- a/core/l10n/zh_CN.js
+++ b/core/l10n/zh_CN.js
@@ -112,7 +112,6 @@ OC.L10N.register(
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "反向代理配置错误, 或者您正在通过可信的代理访问 Nextcloud. 如果您不是通过可信代理访问 Nextcloud, 这将是一个安全问题, 并允许攻击者通过伪装 IP 地址访问 Nextcloud. 更多信息请查看我们的<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">文档</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached 当前配置为分布式缓存, 但是当前安装的 PHP 模块是 \"memcache\".  \\OC\\Memcache\\Memcached 仅支持 \"memcached\" 而不是 \"memcache\". 点击<a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki</a>了解两者的不同.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "一些文件没有通过完整性检查. 了解如何解决该问题请查看我们的<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">文档</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">无效的文件列表…</a> / <a href=\"{rescanEndpoint}\">重新扫描…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP opcache配置不正确.<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">为更好的性能，我们建议↗</a> 使用下列设置<code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP的函数“set_time_limit\"是不可用的，这导致脚本在运行中被中止，暂停你的安装，我们强烈建议你开启这个函数",
     "Error occurred while checking server setup" : "检查服务器设置时出错",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "你的数据存储目录可以从互联网上直接访问。.htaccess文件没有生效，请配置你的网页服务器以避免数据存储目录可从外部访问或将数据存储目录转移到网页服务器根目录之外。",
@@ -127,7 +126,6 @@ OC.L10N.register(
     "Expiration" : "过期",
     "Expiration date" : "过期日期",
     "Choose a password for the public link" : "为共享链接设置密码",
-    "Choose a password for the public link or press \"Enter ↵\"" : "为公开链接选择一个密码, 或按 \"Enter 
\"",
     "Copied!" : "已经复制!",
     "Copy" : "复制",
     "Not supported!" : "无法支持!",
@@ -339,6 +337,7 @@ OC.L10N.register(
     "Cheers!" : "干杯！",
     "Use the following link to reset your password: {link}" : "使用以下链接重置您的密码: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "嗨、你好,<br><br>只想让你知道 %s 分享了 <strong>%s</strong> 给你。<br><a href=\"%s\">现在查看！</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "由于您的实例较大, 请使用命令行更新."
+    "Please use the command line updater because you have a big instance." : "由于您的实例较大, 请使用命令行更新.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP opcache配置不正确.<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">为更好的性能，我们建议↗</a> 使用下列设置<code>php.ini</code>:"
 },
 "nplurals=1; plural=0;");
diff --git a/core/l10n/zh_CN.json b/core/l10n/zh_CN.json
index 2c4f926c2fe..3721f18ddfa 100644
--- a/core/l10n/zh_CN.json
+++ b/core/l10n/zh_CN.json
@@ -110,7 +110,6 @@
     "The reverse proxy headers configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If you are not accessing Nextcloud from a trusted proxy, this is a security issue and can allow an attacker to spoof their IP address as visible to Nextcloud. Further information can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>." : "反向代理配置错误, 或者您正在通过可信的代理访问 Nextcloud. 如果您不是通过可信代理访问 Nextcloud, 这将是一个安全问题, 并允许攻击者通过伪装 IP 地址访问 Nextcloud. 更多信息请查看我们的<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">文档</a>.",
     "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "Memcached 当前配置为分布式缓存, 但是当前安装的 PHP 模块是 \"memcache\".  \\OC\\Memcache\\Memcached 仅支持 \"memcached\" 而不是 \"memcache\". 点击<a target=\"_blank\" rel=\"noreferrer\" href=\"{wikiLink}\">memcached wiki</a>了解两者的不同.",
     "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in our <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "一些文件没有通过完整性检查. 了解如何解决该问题请查看我们的<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">文档</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">无效的文件列表…</a> / <a href=\"{rescanEndpoint}\">重新扫描…</a>)",
-    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP opcache配置不正确.<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">为更好的性能，我们建议↗</a> 使用下列设置<code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. We strongly recommend enabling this function." : "PHP的函数“set_time_limit\"是不可用的，这导致脚本在运行中被中止，暂停你的安装，我们强烈建议你开启这个函数",
     "Error occurred while checking server setup" : "检查服务器设置时出错",
     "Your data directory and your files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server in a way that the data directory is no longer accessible or you move the data directory outside the web server document root." : "你的数据存储目录可以从互联网上直接访问。.htaccess文件没有生效，请配置你的网页服务器以避免数据存储目录可从外部访问或将数据存储目录转移到网页服务器根目录之外。",
@@ -125,7 +124,6 @@
     "Expiration" : "过期",
     "Expiration date" : "过期日期",
     "Choose a password for the public link" : "为共享链接设置密码",
-    "Choose a password for the public link or press \"Enter ↵\"" : "为公开链接选择一个密码, 或按 \"Enter 
\"",
     "Copied!" : "已经复制!",
     "Copy" : "复制",
     "Not supported!" : "无法支持!",
@@ -337,6 +335,7 @@
     "Cheers!" : "干杯！",
     "Use the following link to reset your password: {link}" : "使用以下链接重置您的密码: {link}",
     "Hey there,<br><br>just letting you know that %s shared <strong>%s</strong> with you.<br><a href=\"%s\">View it!</a><br><br>" : "嗨、你好,<br><br>只想让你知道 %s 分享了 <strong>%s</strong> 给你。<br><a href=\"%s\">现在查看！</a><br><br>",
-    "Please use the command line updater because you have a big instance." : "由于您的实例较大, 请使用命令行更新."
+    "Please use the command line updater because you have a big instance." : "由于您的实例较大, 请使用命令行更新.",
+    "The PHP Opcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">For better performance we recommend ↗</a> to use following settings in the <code>php.ini</code>:" : "PHP opcache配置不正确.<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">为更好的性能，我们建议↗</a> 使用下列设置<code>php.ini</code>:"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file