[tx-robot] updated from transifex

1 files changed, 8 insertions, 8 deletions

diff --git a/settings/l10n/zh_TW.json b/settings/l10n/zh_TW.json
index 66ec7d155ee..e4a6a632734 100644
--- a/settings/l10n/zh_TW.json
+++ b/settings/l10n/zh_TW.json
@@ -167,20 +167,12 @@
     "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one." : " 您需要遷移您的加密金鑰從舊版的加密 (ownCloud <= 8.0) 到新版",
     "Start migration" : "開始遷移",
     "Security & setup warnings" : "安全及設定警告",
-    "php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 看起來沒有設定完成，無法正確取得系統環境變數，getenv(\"PATH\") 回傳資料為空值",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm." : "請您參考 <a target=\\\"_blank\\\" href=\\\"%s\\\">安裝文件手冊 ↗</a> 來確認php的設定值以及伺服器端的php設定，特別是當您使用php-fpm。",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用，這樣可以防止來自網頁端的設定操作，每次需要更改設定時，都需要手動將設定檔暫時改為可讀寫。",
-    "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 已經設定成「剪除 inline doc block」模式，這將會使幾個核心應用程式無法使用",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "這大概是由快取或是加速器像是 Zend OPcache, eAccelerator 造成的",
     "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 'filelocking.enabled' 以避免出現這樣的問題，請參考<a target=\\\"_blank\\\" href=\\\"%s\\\">文件手冊 ↗</a> 來了解更多的資訊。",
     "System locale can not be set to a one which supports UTF-8." : "無法設定為一個支援 UTF-8 的系統語系",
-    "This means that there might be problems with certain characters in file names." : "這表示檔名中使用一些特殊字元可能會造成問題",
-    "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "我們強烈建議在您的系統上安裝必要的套件來支援以下的語系：%s",
-    "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您的安裝不在網域的最上層，並且使用 cron 作為排程器，URL 的生成可能會有問題，為了避免這樣的狀況，請您在 config.php 檔案裡設定 overwrite.cli.url 為您安裝的 webroot 路徑（建議值：\"%s\"）",
-    "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : " 無法透過 CLI 來執行排程工作，發生以下技術性錯誤：",
     "All checks passed." : "所有檢查正常",
     "Execute one task with each page loaded" : "每個頁面載入時執行",
-    "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "已經與 webcron 服務註冊好，將會每 15 分鐘透過 HTTP 呼叫 cron.php",
     "Sharing" : "分享",
     "Allow apps to use the Share API" : "允許 apps 使用分享 API",
     "Allow users to share via link" : "允許使用者透過連結分享",
@@ -239,11 +231,19 @@
     "Sessions" : "工作階段",
     "Sync clients" : "同步客戶端",
     "This is used for sending out notifications." : "用於寄送通知",
+    "php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 看起來沒有設定完成，無法正確取得系統環境變數，getenv(\"PATH\") 回傳資料為空值",
+    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm." : "請您參考 <a target=\\\"_blank\\\" href=\\\"%s\\\">安裝文件手冊 ↗</a> 來確認php的設定值以及伺服器端的php設定，特別是當您使用php-fpm。",
+    "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 已經設定成「剪除 inline doc block」模式，這將會使幾個核心應用程式無法使用",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "未偵測到 PHP 模組 'fileinfo'。我們強烈建議啟用這個模組以取得最好的 mime-type 支援。",
+    "This means that there might be problems with certain characters in file names." : "這表示檔名中使用一些特殊字元可能會造成問題",
+    "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "我們強烈建議在您的系統上安裝必要的套件來支援以下的語系：%s",
+    "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您的安裝不在網域的最上層，並且使用 cron 作為排程器，URL 的生成可能會有問題，為了避免這樣的狀況，請您在 config.php 檔案裡設定 overwrite.cli.url 為您安裝的 webroot 路徑（建議值：\"%s\"）",
+    "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : " 無法透過 CLI 來執行排程工作，發生以下技術性錯誤：",
     "Cron" : "工作排程",
     "Last cron job execution: %s." : "最近一次執行的排程工作：%s",
     "Last cron job execution: %s. Something seems wrong." : "最近一次執行的排程工作：%s ，看起來發生了一些錯誤",
     "Cron was not executed yet!" : "Cron 沒有執行！",
+    "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "已經與 webcron 服務註冊好，將會每 15 分鐘透過 HTTP 呼叫 cron.php",
     "Use system's cron service to call the cron.php file every 15 minutes." : "使用系統的 cron 服務每 15 分鐘呼叫 cron.php 一次",
     "Cheers!" : "太棒了！",
     "For password recovery and notifications" : "用於密碼重設和通知",