[tx-robot] updated from transifex

70 files changed, 994 insertions, 252 deletions

diff --git a/settings/l10n/cs.js b/settings/l10n/cs.js
index 687251622b7..3c4ccfc1344 100644
--- a/settings/l10n/cs.js
+++ b/settings/l10n/cs.js
@@ -249,20 +249,17 @@ OC.L10N.register(
     "Start migration" : "Spustit migraci",
     "Security & setup warnings" : "Upozornění zabezpečení a nastavení",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP není nejspíše správně nastaveno pro dotazování na proměnné hodnoty systému. Test s getenv(\"PATH\") vrací pouze prázdnou odpověď.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Zkontrolujte prosím konfiguraci PHP podle <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalační dokumentace ↗</a>, hlavně při použití php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Konfigurace je nastavena pouze pro čtení. Toto znemožňuje některá nastavení přes webové rozhraní. Dále musí být pro každou změnu povolen zápis do konfiguračního souboru ručně.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP je patrně nastaveno tak, aby odstraňovalo bloky komentářů. Toto bude mít za následek znepřístupnění mnoha důležitých aplikací.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Toto je pravděpodobně způsobeno aplikacemi pro urychlení načítání jako jsou Zend OPcache nebo eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Vaše databáze neběží s úrovní izolace transakcí \"READ COMMITTED\". Toto může způsobit problémy při paralelním spouštění více akcí současně.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "Je nainstalován %1$s nižší verze než %2$s, z důvodu lepší stability a výkonu doporučujeme aktualizovat na novější verzi %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Modul PHP 'fileinfo' chybí. Důrazně se doporučuje, aby tento modul pro získání lepších výsledků při zjišťování typu MIME byl povolen.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakční uzamykání souborů je vypnuto, což může vést k problémům s \"race\" podmínkami. Pro zabránění těmto problémům povolte 'filelocking.enabled' v souboru config.php. Více informací lze nalézt v <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentaci ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Není možné nastavit znakovou sadu, která podporuje UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "To znamená, že se mohou vyskytnout problémy s určitými znaky v názvech souborů.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Velmi doporučujeme nainstalovat požadované balíčky do systému, pro podporu jednoho z následujících národních prostředí: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Instalace mimo kořenový adresář domény a používání systémového příkazu cron může způsobit problém s generováním správné URL. Pro zabránění těmto chybám nastavte prosím správnou cestu ve svém config.php souboru v hodnotě \"overwrite.cli.url\" (Je doporučena tato: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nebylo možné spustit službu cron v CLI. Došlo k následujícím technickým chybám:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Prosím překontrolujte <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalační pokyny ↗</a> a najděte jakékoliv chyby a varování v <a href=\"%s\">logu</a>.",
     "All checks passed." : "Všechny testy byly úspěšné.",
     "Background jobs" : "Úkoly na pozadí",
     "Last job ran %s." : "Poslední úkol proběhl: %s.",
@@ -297,7 +294,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existuje mnoho možností, jak si přizpůsobit vaši instanci Nextcloudu. Zde je pro vaši informaci pár tipů, kde začít.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite se aktuálně používá jako databáze na backendu. U větších instalací doporučujeme přechod na jinou databázi.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "To je obzvlášť vhodné, pokud se používá k synchronizaci desktopový klient.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pro migraci na jinou databázi použijte v příkazovém řádku nástroj: 'occ db:convert-type' nebo nahlédněte do <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentace ↗</a>.",
     "How to do backups" : "Jak vytvářet zálohy",
     "Advanced monitoring" : "Pokročilé monitorování",
     "Performance tuning" : "Ladění výkonu",
@@ -406,10 +402,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP je patrně nastaveno tak, aby odstraňovalo bloky komentářů. Toto bude mít za následek nedostupnost množství hlavních aplikací.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "Je nainstalován %1$s nižší verze než %2$s, z důvodu lepší stability a výkonu doporučujeme aktualizovat na novější verzi %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Schází PHP modul 'fileinfo'. Doporučujeme jej povolit pro nejlepší výsledky detekce typů MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakční uzamykání souborů je vypnuto, což může vést k problémům s \"race\" podmínkami. Pro zabránění těmto problémům povolte 'filelocking.enabled' v souboru config.php. Více informací lze nalézt v <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentaci ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "To znamená, že se mohou vyskytnout problémy s určitými znaky v názvech souborů.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Velmi doporučujeme nainstalovat požadované balíčky do systému, pro podporu jednoho z následujících národních prostředí: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Instalace mimo kořenový adresář domény a používání systémového příkazu cron může způsobit problém s generováním správné URL. Pro zabránění těmto chybám nastavte prosím správnou cestu ve svém config.php souboru v hodnotě \"overwrite.cli.url\" (Je doporučena tato: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Nebylo možné spustit službu cron v CLI. Došlo k následujícím technickým chybám:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Prosím překontrolujte <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalační pokyny ↗</a> a najděte jakékoliv chyby a varování v <a href=\"%s\">logu</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Poslední cron proběhl: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Poslední cron proběhl: %s. Vypadá to, že něco není v pořádku.",
@@ -418,6 +416,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Použít systémovou službu cron pro volání cron.php každých 15 minut.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Pro spuštění je potřeba PHP posix rozšíření. Více informací lze nalézt v {linkstart}PHP dokumentaci{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Povolit automatické vyplňování v dialogu sdílení. Pokud je toto vypnuto, je třeba ručně vyplňovat celé uživatelské jméno.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pro migraci na jinou databázi použijte v příkazovém řádku nástroj: 'occ db:convert-type' nebo nahlédněte do <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentace ↗</a>.",
     "Uninstall app" : "Odinstalovat aplikaci",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Vítej,<br><br>jen ti dáváme vědět, že nyní máš %s účet.<br><br>Tvé uživatelské jméno: <strong>%s</strong><br>Přístup: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Ať slouží!",
diff --git a/settings/l10n/cs.json b/settings/l10n/cs.json
index 495a8bfbea2..760cc82a84c 100644
--- a/settings/l10n/cs.json
+++ b/settings/l10n/cs.json
@@ -247,20 +247,17 @@
     "Start migration" : "Spustit migraci",
     "Security & setup warnings" : "Upozornění zabezpečení a nastavení",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP není nejspíše správně nastaveno pro dotazování na proměnné hodnoty systému. Test s getenv(\"PATH\") vrací pouze prázdnou odpověď.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Zkontrolujte prosím konfiguraci PHP podle <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalační dokumentace ↗</a>, hlavně při použití php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Konfigurace je nastavena pouze pro čtení. Toto znemožňuje některá nastavení přes webové rozhraní. Dále musí být pro každou změnu povolen zápis do konfiguračního souboru ručně.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP je patrně nastaveno tak, aby odstraňovalo bloky komentářů. Toto bude mít za následek znepřístupnění mnoha důležitých aplikací.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Toto je pravděpodobně způsobeno aplikacemi pro urychlení načítání jako jsou Zend OPcache nebo eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Vaše databáze neběží s úrovní izolace transakcí \"READ COMMITTED\". Toto může způsobit problémy při paralelním spouštění více akcí současně.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "Je nainstalován %1$s nižší verze než %2$s, z důvodu lepší stability a výkonu doporučujeme aktualizovat na novější verzi %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Modul PHP 'fileinfo' chybí. Důrazně se doporučuje, aby tento modul pro získání lepších výsledků při zjišťování typu MIME byl povolen.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakční uzamykání souborů je vypnuto, což může vést k problémům s \"race\" podmínkami. Pro zabránění těmto problémům povolte 'filelocking.enabled' v souboru config.php. Více informací lze nalézt v <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentaci ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Není možné nastavit znakovou sadu, která podporuje UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "To znamená, že se mohou vyskytnout problémy s určitými znaky v názvech souborů.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Velmi doporučujeme nainstalovat požadované balíčky do systému, pro podporu jednoho z následujících národních prostředí: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Instalace mimo kořenový adresář domény a používání systémového příkazu cron může způsobit problém s generováním správné URL. Pro zabránění těmto chybám nastavte prosím správnou cestu ve svém config.php souboru v hodnotě \"overwrite.cli.url\" (Je doporučena tato: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nebylo možné spustit službu cron v CLI. Došlo k následujícím technickým chybám:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Prosím překontrolujte <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalační pokyny ↗</a> a najděte jakékoliv chyby a varování v <a href=\"%s\">logu</a>.",
     "All checks passed." : "Všechny testy byly úspěšné.",
     "Background jobs" : "Úkoly na pozadí",
     "Last job ran %s." : "Poslední úkol proběhl: %s.",
@@ -295,7 +292,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existuje mnoho možností, jak si přizpůsobit vaši instanci Nextcloudu. Zde je pro vaši informaci pár tipů, kde začít.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite se aktuálně používá jako databáze na backendu. U větších instalací doporučujeme přechod na jinou databázi.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "To je obzvlášť vhodné, pokud se používá k synchronizaci desktopový klient.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pro migraci na jinou databázi použijte v příkazovém řádku nástroj: 'occ db:convert-type' nebo nahlédněte do <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentace ↗</a>.",
     "How to do backups" : "Jak vytvářet zálohy",
     "Advanced monitoring" : "Pokročilé monitorování",
     "Performance tuning" : "Ladění výkonu",
@@ -404,10 +400,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP je patrně nastaveno tak, aby odstraňovalo bloky komentářů. Toto bude mít za následek nedostupnost množství hlavních aplikací.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "Je nainstalován %1$s nižší verze než %2$s, z důvodu lepší stability a výkonu doporučujeme aktualizovat na novější verzi %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Schází PHP modul 'fileinfo'. Doporučujeme jej povolit pro nejlepší výsledky detekce typů MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakční uzamykání souborů je vypnuto, což může vést k problémům s \"race\" podmínkami. Pro zabránění těmto problémům povolte 'filelocking.enabled' v souboru config.php. Více informací lze nalézt v <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentaci ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "To znamená, že se mohou vyskytnout problémy s určitými znaky v názvech souborů.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Velmi doporučujeme nainstalovat požadované balíčky do systému, pro podporu jednoho z následujících národních prostředí: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Instalace mimo kořenový adresář domény a používání systémového příkazu cron může způsobit problém s generováním správné URL. Pro zabránění těmto chybám nastavte prosím správnou cestu ve svém config.php souboru v hodnotě \"overwrite.cli.url\" (Je doporučena tato: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Nebylo možné spustit službu cron v CLI. Došlo k následujícím technickým chybám:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Prosím překontrolujte <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalační pokyny ↗</a> a najděte jakékoliv chyby a varování v <a href=\"%s\">logu</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Poslední cron proběhl: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Poslední cron proběhl: %s. Vypadá to, že něco není v pořádku.",
@@ -416,6 +414,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Použít systémovou službu cron pro volání cron.php každých 15 minut.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Pro spuštění je potřeba PHP posix rozšíření. Více informací lze nalézt v {linkstart}PHP dokumentaci{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Povolit automatické vyplňování v dialogu sdílení. Pokud je toto vypnuto, je třeba ručně vyplňovat celé uživatelské jméno.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pro migraci na jinou databázi použijte v příkazovém řádku nástroj: 'occ db:convert-type' nebo nahlédněte do <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentace ↗</a>.",
     "Uninstall app" : "Odinstalovat aplikaci",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Vítej,<br><br>jen ti dáváme vědět, že nyní máš %s účet.<br><br>Tvé uživatelské jméno: <strong>%s</strong><br>Přístup: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Ať slouží!",
diff --git a/settings/l10n/de.js b/settings/l10n/de.js
index 6ffc87058fe..9e4a1bb9f4d 100644
--- a/settings/l10n/de.js
+++ b/settings/l10n/de.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Sicherheits- & Einrichtungswarnungen",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Für die Sicherheit und Geschwindigkeit Deiner Installation ist es von großer Bedeutung, dass sie richtig konfiguriert ist. Um Dir hierbei zu helfen werden einige automatische Tests durchgeführt. Weitere Informationen findest Du im Tipps & Tricks- Abschnitt und in der Dokumentation.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP scheint zur Abfrage von Systemumgebungsvariablen nicht richtig eingerichtet zu sein. Der Test mit getenv(\"PATH\") liefert nur eine leere Antwort zurück.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Bitte die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsdokumentation ↗</a> auf Hinweise zur PHP-Konfiguration durchlesen, sowie die PHP-Konfiguration Deines Servers überprüfen, insbesondere dann, wenn PHP-FPM eingesetzt wird.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Die schreibgeschützte Konfiguration wurde aktiviert. Dies verhindert das Setzen einiger Einstellungen über die Web-Schnittstelle. Weiterhin muss bei jedem Update der Schreibzugriff auf die Datei händisch aktiviert werden.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dies wird wahrscheinlich durch Zwischenspeicher/Beschleuniger wie etwa Zend OPcache oder eAccelerator verursacht.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Deine Datenbank läuft nicht mit der \"READ COMMITED\" Transaktionsisolationsstufe. Dies kann Probleme hervorrufen, wenn mehrere Aktionen parallel ausgeführt werden.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Das PHP Modul 'fileinfo' fehlt. Es empfiehlt sich dringend, das Modul zu aktivieren, um bestmögliche Ergebnisse bei der MIME-Datei-Typ-Erkennung zu erhalten. ",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. 'filelocking.enabled' in der config.php aktivieren, um diese Probleme zu vermeiden. Weitere Informationen findest du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Es kann kein Systemgebietsschema gesetzt werden, das UTF-8 unterstützt.",
     "This means that there might be problems with certain characters in filenames." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Es empfiehlt sich dringend, die erforderlichen Pakete auf Deinen System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Deine Installation nicht im Wurzelverzeichnis der Domain befindet und Cron des Systems genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setze bitte die „overwrite.cli.url“-Option in Deiner config.php auf das Web-Wurzelverzeichnis Deiner Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten: ",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfe noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrolliere das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "All checks passed." : "Alle Überprüfungen bestanden.",
     "Background jobs" : "Hintergrund-Aufgaben",
     "Last job ran %s." : "Letzte Aufgabe ausgeführt %s",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Es gibt ein Menge von Eigenschaften und Konfigurationsschaltern die es ermöglichen, die Installation optimal zu nutzen und anzupassen. Hier einige Verweise auf weitere Informationen.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wird als Datenbank verwendet. Bei größeren Installationen wird empfohlen, auf ein anderes Datenbank-Backend zu wechseln.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dies wird insbesondere bei der Benutzung des Dektop-Clients zur Synchronisierung empfohlen.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutze bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "How to do backups" : "Wie man Datensicherungen anlegt",
     "Advanced monitoring" : "Erweitertes Monitoring",
     "Performance tuning" : "Leistungsoptimierung",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Das PHP-Modul 'fileinfo' fehlt. Wir empfehlen dieses Modul zu aktivieren um die besten Resultate bei der Erkennung der Dateitypen zu erreichen.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. 'filelocking.enabled' in der config.php aktivieren, um diese Probleme zu vermeiden. Weitere Informationen findest du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Wir empfehlen dringend, die erforderlichen Pakete auf Deinem System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Deine Installation nicht im Wurzelverzeichnis der Domain befindet und Cron aus dem System genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setze bitte die „overwrite.cli.url“-Option in Deiner config.php auf das Web-Wurzelverzeichnis Deiner Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfe noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrolliere das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Letzte Cron-Job-Ausführung: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Letzte Cron-Job-Ausführung: %s. Möglicherweise liegt ein Fehler vor.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Benutze den systemeigenen Cron-Dienst, um die cron.php alle 15 Minuten aufzurufen.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix Erweiterung benötigt. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Die Auto-Vervollständigung von Benutzernamen im Teilen-Dialog erlauben. Wenn dies deaktiviert ist, muss der vollständige Benutzername eingegeben werden.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutze bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "Uninstall app" : "App deinstallieren",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass du jetzt ein %s-Konto hast.<br><br>Dein Benutzername: <strong>%s</strong><br>Greife darauf zu: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Noch einen schönen Tag!",
diff --git a/settings/l10n/de.json b/settings/l10n/de.json
index 939caad194e..c1fa53fa313 100644
--- a/settings/l10n/de.json
+++ b/settings/l10n/de.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Sicherheits- & Einrichtungswarnungen",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Für die Sicherheit und Geschwindigkeit Deiner Installation ist es von großer Bedeutung, dass sie richtig konfiguriert ist. Um Dir hierbei zu helfen werden einige automatische Tests durchgeführt. Weitere Informationen findest Du im Tipps & Tricks- Abschnitt und in der Dokumentation.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP scheint zur Abfrage von Systemumgebungsvariablen nicht richtig eingerichtet zu sein. Der Test mit getenv(\"PATH\") liefert nur eine leere Antwort zurück.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Bitte die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsdokumentation ↗</a> auf Hinweise zur PHP-Konfiguration durchlesen, sowie die PHP-Konfiguration Deines Servers überprüfen, insbesondere dann, wenn PHP-FPM eingesetzt wird.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Die schreibgeschützte Konfiguration wurde aktiviert. Dies verhindert das Setzen einiger Einstellungen über die Web-Schnittstelle. Weiterhin muss bei jedem Update der Schreibzugriff auf die Datei händisch aktiviert werden.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dies wird wahrscheinlich durch Zwischenspeicher/Beschleuniger wie etwa Zend OPcache oder eAccelerator verursacht.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Deine Datenbank läuft nicht mit der \"READ COMMITED\" Transaktionsisolationsstufe. Dies kann Probleme hervorrufen, wenn mehrere Aktionen parallel ausgeführt werden.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Das PHP Modul 'fileinfo' fehlt. Es empfiehlt sich dringend, das Modul zu aktivieren, um bestmögliche Ergebnisse bei der MIME-Datei-Typ-Erkennung zu erhalten. ",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. 'filelocking.enabled' in der config.php aktivieren, um diese Probleme zu vermeiden. Weitere Informationen findest du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Es kann kein Systemgebietsschema gesetzt werden, das UTF-8 unterstützt.",
     "This means that there might be problems with certain characters in filenames." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Es empfiehlt sich dringend, die erforderlichen Pakete auf Deinen System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Deine Installation nicht im Wurzelverzeichnis der Domain befindet und Cron des Systems genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setze bitte die „overwrite.cli.url“-Option in Deiner config.php auf das Web-Wurzelverzeichnis Deiner Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten: ",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfe noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrolliere das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "All checks passed." : "Alle Überprüfungen bestanden.",
     "Background jobs" : "Hintergrund-Aufgaben",
     "Last job ran %s." : "Letzte Aufgabe ausgeführt %s",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Es gibt ein Menge von Eigenschaften und Konfigurationsschaltern die es ermöglichen, die Installation optimal zu nutzen und anzupassen. Hier einige Verweise auf weitere Informationen.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wird als Datenbank verwendet. Bei größeren Installationen wird empfohlen, auf ein anderes Datenbank-Backend zu wechseln.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dies wird insbesondere bei der Benutzung des Dektop-Clients zur Synchronisierung empfohlen.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutze bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "How to do backups" : "Wie man Datensicherungen anlegt",
     "Advanced monitoring" : "Erweitertes Monitoring",
     "Performance tuning" : "Leistungsoptimierung",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Das PHP-Modul 'fileinfo' fehlt. Wir empfehlen dieses Modul zu aktivieren um die besten Resultate bei der Erkennung der Dateitypen zu erreichen.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. 'filelocking.enabled' in der config.php aktivieren, um diese Probleme zu vermeiden. Weitere Informationen findest du in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Wir empfehlen dringend, die erforderlichen Pakete auf Deinem System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Deine Installation nicht im Wurzelverzeichnis der Domain befindet und Cron aus dem System genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setze bitte die „overwrite.cli.url“-Option in Deiner config.php auf das Web-Wurzelverzeichnis Deiner Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfe noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrolliere das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Letzte Cron-Job-Ausführung: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Letzte Cron-Job-Ausführung: %s. Möglicherweise liegt ein Fehler vor.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Benutze den systemeigenen Cron-Dienst, um die cron.php alle 15 Minuten aufzurufen.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, wird die PHP-Posix Erweiterung benötigt. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Die Auto-Vervollständigung von Benutzernamen im Teilen-Dialog erlauben. Wenn dies deaktiviert ist, muss der vollständige Benutzername eingegeben werden.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutze bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "Uninstall app" : "App deinstallieren",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass du jetzt ein %s-Konto hast.<br><br>Dein Benutzername: <strong>%s</strong><br>Greife darauf zu: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Noch einen schönen Tag!",
diff --git a/settings/l10n/de_DE.js b/settings/l10n/de_DE.js
index 336a438402f..2a878dced9c 100644
--- a/settings/l10n/de_DE.js
+++ b/settings/l10n/de_DE.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Sicherheits- & Einrichtungswarnungen",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Für die Sicherheit und Geschwindigkeit Ihrer Installation ist es von großer Bedeutung, dass sie richtig konfiguriert ist. Um Ihnen hierbei zu helfen werden einige automatische Tests durchgeführt. Weitere Informationen finden Sie im Tipps & Tricks- Abschnitt und in der Dokumentation.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP scheint zur Abfrage von Systemumgebungsvariablen nicht richtig eingerichtet zu sein. Der Test mit getenv(\"PATH\") liefert nur eine leere Antwort zurück.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Bitte die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsdokumentation ↗</a> auf Hinweise zur PHP-Konfiguration durchlesen, sowie die PHP-Konfiguration Ihres Servers überprüfen, insbesondere dann, wenn PHP-FPM eingesetzt wird.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Die schreibgeschützte Konfiguration wurde aktiviert. Dies verhindert das Setzen einiger Einstellungen über die Web-Schnittstelle. Weiterhin muss bei jedem Update der Schreibzugriff auf die Datei händisch aktiviert werden.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dies wird wahrscheinlich durch Zwischenspeicher/Beschleuniger wie etwa Zend OPcache oder eAccelerator verursacht.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Ihre Datenbank läuft nicht mit der \"READ COMMITED\" Transaktionsisolationsstufe. Dies kann Probleme hervorrufen, wenn mehrere Aktionen parallel ausgeführt werden.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Das PHP Modul 'fileinfo' fehlt. Es empfiehlt sich dringend, das Modul zu aktivieren, um bestmögliche Ergebnisse bei der MIME-Datei-Typ-Erkennung zu erhalten. ",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. Aktivieren Sie 'filelocking.enabled' in der config.php  diese Probleme zu vermeiden. Weitere Informationen findest Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Es kann kein Systemgebietsschema gesetzt werden, das UTF-8 unterstützt.",
     "This means that there might be problems with certain characters in filenames." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Es empfiehlt sich dringend, die erforderlichen Pakete auf Ihrem System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Ihre Installation nicht im Wurzelverzeichnis der Domain befindet und Cron des Systems genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setzen Sie bitte die „overwrite.cli.url“-Option in Ihrer config.php auf das Web-Wurzelverzeichnis Ihrer Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten: ",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfen Sie noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrollieren Sie das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "All checks passed." : "Alle Überprüfungen bestanden.",
     "Background jobs" : "Hintergrund-Aufgaben",
     "Last job ran %s." : "Letzte Aufgabe ausgeführt %s",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Es gibt ein Menge von Eigenschaften und Konfigurationsschaltern die es ermöglichen, die Installation optimal zu nutzen und anzupassen. Hier einige Verweise auf weitere Informationen.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wird als Datenbank verwendet. Bei größeren Installationen empfehlen wir,  auf ein anderes Datenbank-Backend zu wechseln.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dies wird insbesondere bei der Benutzung des Dektop-Clients zur Synchronisierung empfohlen.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutzen Sie bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "How to do backups" : "Wie man Datensicherungen anlegt",
     "Advanced monitoring" : "Erweitertes Monitoring",
     "Performance tuning" : "Leistungsoptimierung",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Das PHP-Modul 'fileinfo' fehlt. Wir empfehlen Ihnen dieses Modul zu aktivieren, um die besten Resultate bei der Bestimmung der Dateitypen zu erzielen.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. Aktivieren Sie 'filelocking.enabled' in der config.php  diese Probleme zu vermeiden. Weitere Informationen findest Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Wir empfehlen dringend, die erforderlichen Pakete auf Ihrem System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Ihre Installation nicht im Wurzelverzeichnis der Domain befindet und Cron aus dem System genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setzen Sie bitte die „overwrite.cli.url“-Option in Ihrer config.php auf das Web-Wurzelverzeichnis Ihrer Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfen Sie noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrollieren Sie das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Letzte Cron-Job-Ausführung: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Letzte Cron-Job-Ausführung: %s. Möglicherweise liegt ein Fehler vor.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Benutzen Sie den systemeigenen Cron-Dienst, um die cron.php alle 15 Minuten aufzurufen.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, benötigen Sie die PHP-Posix Erweiterung. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Die Auto-Vervollständigung von Benutzernamen im Teilen-Dialog erlauben. Wenn dies deaktiviert ist, muss der vollständige Benutzername eingegeben werden.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutzen Sie bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "Uninstall app" : "App deinstallieren",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass Sie jetzt ein %s-Konto haben.<br><br>Ihr Benutzername: <strong>%s</strong><br>Greifen Sie darauf zu: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Noch einen schönen Tag!",
diff --git a/settings/l10n/de_DE.json b/settings/l10n/de_DE.json
index b6485921b44..c91c3614956 100644
--- a/settings/l10n/de_DE.json
+++ b/settings/l10n/de_DE.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Sicherheits- & Einrichtungswarnungen",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Für die Sicherheit und Geschwindigkeit Ihrer Installation ist es von großer Bedeutung, dass sie richtig konfiguriert ist. Um Ihnen hierbei zu helfen werden einige automatische Tests durchgeführt. Weitere Informationen finden Sie im Tipps & Tricks- Abschnitt und in der Dokumentation.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP scheint zur Abfrage von Systemumgebungsvariablen nicht richtig eingerichtet zu sein. Der Test mit getenv(\"PATH\") liefert nur eine leere Antwort zurück.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Bitte die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsdokumentation ↗</a> auf Hinweise zur PHP-Konfiguration durchlesen, sowie die PHP-Konfiguration Ihres Servers überprüfen, insbesondere dann, wenn PHP-FPM eingesetzt wird.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Die schreibgeschützte Konfiguration wurde aktiviert. Dies verhindert das Setzen einiger Einstellungen über die Web-Schnittstelle. Weiterhin muss bei jedem Update der Schreibzugriff auf die Datei händisch aktiviert werden.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dies wird wahrscheinlich durch Zwischenspeicher/Beschleuniger wie etwa Zend OPcache oder eAccelerator verursacht.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Ihre Datenbank läuft nicht mit der \"READ COMMITED\" Transaktionsisolationsstufe. Dies kann Probleme hervorrufen, wenn mehrere Aktionen parallel ausgeführt werden.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Das PHP Modul 'fileinfo' fehlt. Es empfiehlt sich dringend, das Modul zu aktivieren, um bestmögliche Ergebnisse bei der MIME-Datei-Typ-Erkennung zu erhalten. ",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. Aktivieren Sie 'filelocking.enabled' in der config.php  diese Probleme zu vermeiden. Weitere Informationen findest Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Es kann kein Systemgebietsschema gesetzt werden, das UTF-8 unterstützt.",
     "This means that there might be problems with certain characters in filenames." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Es empfiehlt sich dringend, die erforderlichen Pakete auf Ihrem System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Ihre Installation nicht im Wurzelverzeichnis der Domain befindet und Cron des Systems genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setzen Sie bitte die „overwrite.cli.url“-Option in Ihrer config.php auf das Web-Wurzelverzeichnis Ihrer Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten: ",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfen Sie noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrollieren Sie das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "All checks passed." : "Alle Überprüfungen bestanden.",
     "Background jobs" : "Hintergrund-Aufgaben",
     "Last job ran %s." : "Letzte Aufgabe ausgeführt %s",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Es gibt ein Menge von Eigenschaften und Konfigurationsschaltern die es ermöglichen, die Installation optimal zu nutzen und anzupassen. Hier einige Verweise auf weitere Informationen.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wird als Datenbank verwendet. Bei größeren Installationen empfehlen wir,  auf ein anderes Datenbank-Backend zu wechseln.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dies wird insbesondere bei der Benutzung des Dektop-Clients zur Synchronisierung empfohlen.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutzen Sie bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "How to do backups" : "Wie man Datensicherungen anlegt",
     "Advanced monitoring" : "Erweitertes Monitoring",
     "Performance tuning" : "Leistungsoptimierung",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP ist offenbar so konfiguriert, dass PHPDoc-Blöcke in der Anweisung entfernt werden. Dadurch sind mehrere Kern-Apps nicht erreichbar.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s ist in einer älteren Version als %2$s installiert. Aus Stabilitäts- und Performancegründen empfehlen wir eine Aktualisierung auf eine neuere %1$s-Version",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Das PHP-Modul 'fileinfo' fehlt. Wir empfehlen Ihnen dieses Modul zu aktivieren, um die besten Resultate bei der Bestimmung der Dateitypen zu erzielen.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaktionales Sperren ist deaktiviert, was zu Problemen mit Laufzeitbedingungen führen kann. Aktivieren Sie 'filelocking.enabled' in der config.php  diese Probleme zu vermeiden. Weitere Informationen findest Sie in unserer <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "Dies bedeutet, dass es zu Problemen mit bestimmten Zeichen in Dateinamen kommen kann.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Wir empfehlen dringend, die erforderlichen Pakete auf Ihrem System zu installieren, damit eines der folgenden Gebietsschemata unterstützt wird: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Wenn sich Ihre Installation nicht im Wurzelverzeichnis der Domain befindet und Cron aus dem System genutzt wird, kann es zu Fehlern bei der URL-Generierung kommen. Um dies zu verhindern, setzen Sie bitte die „overwrite.cli.url“-Option in Ihrer config.php auf das Web-Wurzelverzeichnis Ihrer Installation (Vorschlag: „%s“).",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Die Ausführung des Cron-Jobs über die Kommandozeile war nicht möglich. Die folgenden technischen Fehler sind dabei aufgetreten:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Bitte überprüfen Sie noch einmal die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Installationsanleitungen ↗</a> und kontrollieren Sie das <a href=\"%s\">Log</a> auf mögliche Fehler oder Warnungen.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Letzte Cron-Job-Ausführung: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Letzte Cron-Job-Ausführung: %s. Möglicherweise liegt ein Fehler vor.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Benutzen Sie den systemeigenen Cron-Dienst, um die cron.php alle 15 Minuten aufzurufen.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Um dies auszuführen, benötigen Sie die PHP-Posix Erweiterung. Weitere Informationen in der {linkstart}PHP-Dokumentation{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Die Auto-Vervollständigung von Benutzernamen im Teilen-Dialog erlauben. Wenn dies deaktiviert ist, muss der vollständige Benutzername eingegeben werden.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Um zu einer anderen Datenbank zu migrieren, benutzen Sie bitte die Kommandozeile: 'occ db:convert-type', oder in die <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">Dokumentation ↗</a> schauen.",
     "Uninstall app" : "App deinstallieren",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hallo,<br><br>hier nur kurz die Mitteilung, dass Sie jetzt ein %s-Konto haben.<br><br>Ihr Benutzername: <strong>%s</strong><br>Greifen Sie darauf zu: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Noch einen schönen Tag!",
diff --git a/settings/l10n/el.js b/settings/l10n/el.js
index 7adc8179f77..6d579c831b7 100644
--- a/settings/l10n/el.js
+++ b/settings/l10n/el.js
@@ -243,7 +243,6 @@ OC.L10N.register(
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Η ρύθμιση  \"μόνο ανάγνωση\"  έχει ενεργοποιηθεί. Αυτό εμποδίζει τον καθορισμό κάποιων ρυθμίσεων μέσω της διεπαφής web. Επιπλέον, το αρχείο πρέπει να γίνει χειροκίνητα εγγράψιμο πριν από κάθε διαδικασία ενημέρωσης.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Αυτό πιθανόν προκλήθηκε από προσωρινή μνήμη (cache)/επιταχυντή όπως τη Zend OPcache ή τον eAccelerator.",
     "System locale can not be set to a one which supports UTF-8." : "Οι ρυθμίσεις τοποθεσίας συστήματος δεν μπορούν να οριστούν σε κάποιες που δεν υποστηρίζουν UTF-8.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Παρακαλούμε ελέγξτε τις <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">οδηγίες εγκατάστασης ↗</a>, και ελέγξτε για σφάλματα ή προειδοποιήσεις στα <a href=\"%s\">αρχεία καταγραφής</a>.",
     "All checks passed." : "Όλοι οι έλεγχοι επιτυχείς.",
     "Background jobs" : "Εργασίες παρασκηνίου",
     "Execute one task with each page loaded" : "Εκτελεί μια διεργασία κάθε φορά που φορτώνεται μια σελίδα",
@@ -375,6 +374,7 @@ OC.L10N.register(
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Προτείνουμε ανεπιφύλακτα να εγκαταστήσετε  στο σύστημά σας τα απαιτούμενα πακέτα έτσι ώστε να υποστηρίζεται μια από τις ακόλουθες ρυθμίσεις τοποθεσίας: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Αν η εγκατάστασή σας δεν έχει γίνει στο root του τομέα  και χρησιμοποιείται το cron του συστήματος, μπορεί να υπάρξουν ζητήματα με τη δημιουργία URL. Για να αποφύγετε αυτά τα προβλήματα, παρακαλώ ρυθμίστε την επιλογή  \"overwrite.cli.url\" στο αρχείο  config.php που βρίσκεται στη διαδρομή webroot της εγκατάστασής σας (Suggested: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Δεν ήταν δυνατή η εκτέλεση της cronjob μέσω τερματικού. Εμφανίστηκαν τα παρακάτω τεχνικά σφάλματα:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Παρακαλούμε ελέγξτε τις <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">οδηγίες εγκατάστασης ↗</a>, και ελέγξτε για σφάλματα ή προειδοποιήσεις στα <a href=\"%s\">αρχεία καταγραφής</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Τελευταία εκτέλεση cron job: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Τελευταία εκτέλεση cron job: %s. Κάτι πήγε στραβά.",
diff --git a/settings/l10n/el.json b/settings/l10n/el.json
index 42982e23c58..9fcc9010182 100644
--- a/settings/l10n/el.json
+++ b/settings/l10n/el.json
@@ -241,7 +241,6 @@
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Η ρύθμιση  \"μόνο ανάγνωση\"  έχει ενεργοποιηθεί. Αυτό εμποδίζει τον καθορισμό κάποιων ρυθμίσεων μέσω της διεπαφής web. Επιπλέον, το αρχείο πρέπει να γίνει χειροκίνητα εγγράψιμο πριν από κάθε διαδικασία ενημέρωσης.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Αυτό πιθανόν προκλήθηκε από προσωρινή μνήμη (cache)/επιταχυντή όπως τη Zend OPcache ή τον eAccelerator.",
     "System locale can not be set to a one which supports UTF-8." : "Οι ρυθμίσεις τοποθεσίας συστήματος δεν μπορούν να οριστούν σε κάποιες που δεν υποστηρίζουν UTF-8.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Παρακαλούμε ελέγξτε τις <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">οδηγίες εγκατάστασης ↗</a>, και ελέγξτε για σφάλματα ή προειδοποιήσεις στα <a href=\"%s\">αρχεία καταγραφής</a>.",
     "All checks passed." : "Όλοι οι έλεγχοι επιτυχείς.",
     "Background jobs" : "Εργασίες παρασκηνίου",
     "Execute one task with each page loaded" : "Εκτελεί μια διεργασία κάθε φορά που φορτώνεται μια σελίδα",
@@ -373,6 +372,7 @@
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Προτείνουμε ανεπιφύλακτα να εγκαταστήσετε  στο σύστημά σας τα απαιτούμενα πακέτα έτσι ώστε να υποστηρίζεται μια από τις ακόλουθες ρυθμίσεις τοποθεσίας: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Αν η εγκατάστασή σας δεν έχει γίνει στο root του τομέα  και χρησιμοποιείται το cron του συστήματος, μπορεί να υπάρξουν ζητήματα με τη δημιουργία URL. Για να αποφύγετε αυτά τα προβλήματα, παρακαλώ ρυθμίστε την επιλογή  \"overwrite.cli.url\" στο αρχείο  config.php που βρίσκεται στη διαδρομή webroot της εγκατάστασής σας (Suggested: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Δεν ήταν δυνατή η εκτέλεση της cronjob μέσω τερματικού. Εμφανίστηκαν τα παρακάτω τεχνικά σφάλματα:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Παρακαλούμε ελέγξτε τις <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">οδηγίες εγκατάστασης ↗</a>, και ελέγξτε για σφάλματα ή προειδοποιήσεις στα <a href=\"%s\">αρχεία καταγραφής</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Τελευταία εκτέλεση cron job: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Τελευταία εκτέλεση cron job: %s. Κάτι πήγε στραβά.",
diff --git a/settings/l10n/en_GB.js b/settings/l10n/en_GB.js
index 303be93bbcd..ad056e01c31 100644
--- a/settings/l10n/en_GB.js
+++ b/settings/l10n/en_GB.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Security & setup warnings",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information.",
     "System locale can not be set to a one which supports UTF-8." : "System locale can not be set to a one which supports UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "This means that there might be problems with certain characters in filenames.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "It is strongly proposed to install the required packages on your system to support one of the following locales: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "It was not possible to execute the cron job via CLI. The following technical errors have appeared:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>.",
     "All checks passed." : "All checks passed.",
     "Background jobs" : "Background jobs",
     "Last job ran %s." : "Last job ran %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "There are a lot of features and config switches available to optimally customise and use this instance. Here are some pointers for more information.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "This is particularly recommended when using the desktop client for file synchronisation.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "How to do backups" : "How to do backups",
     "Advanced monitoring" : "Advanced monitoring",
     "Performance tuning" : "Performance tuning",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "The PHP module 'fileinfo' is missing. We strongly recommend enabling this module to get best results with mime-type detection.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information.",
     "This means that there might be problems with certain characters in file names." : "This means that there might be problems with certain characters in file names.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "We strongly suggest installing the required packages on your system to support one of the following locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Last cron job execution: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Last cron job execution: %s. Something seems wrong.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Use system's cron service to call the cron.php file every 15 minutes.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "Uninstall app" : "Uninstall app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Cheers!",
diff --git a/settings/l10n/en_GB.json b/settings/l10n/en_GB.json
index 3da6efbceac..f0e18d40dcd 100644
--- a/settings/l10n/en_GB.json
+++ b/settings/l10n/en_GB.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Security & setup warnings",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information.",
     "System locale can not be set to a one which supports UTF-8." : "System locale can not be set to a one which supports UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "This means that there might be problems with certain characters in filenames.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "It is strongly proposed to install the required packages on your system to support one of the following locales: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "If your installation is not installed at the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "It was not possible to execute the cron job via CLI. The following technical errors have appeared:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>.",
     "All checks passed." : "All checks passed.",
     "Background jobs" : "Background jobs",
     "Last job ran %s." : "Last job ran %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "There are a lot of features and config switches available to optimally customise and use this instance. Here are some pointers for more information.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "This is particularly recommended when using the desktop client for file synchronisation.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "How to do backups" : "How to do backups",
     "Advanced monitoring" : "Advanced monitoring",
     "Performance tuning" : "Performance tuning",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "The PHP module 'fileinfo' is missing. We strongly recommend enabling this module to get best results with mime-type detection.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information.",
     "This means that there might be problems with certain characters in file names." : "This means that there might be problems with certain characters in file names.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "We strongly suggest installing the required packages on your system to support one of the following locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Last cron job execution: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Last cron job execution: %s. Something seems wrong.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Use system's cron service to call the cron.php file every 15 minutes.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "Uninstall app" : "Uninstall app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Cheers!",
diff --git a/settings/l10n/es.js b/settings/l10n/es.js
index ce240f72b1d..cd7642f75c6 100644
--- a/settings/l10n/es.js
+++ b/settings/l10n/es.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Avisos de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante para la seguridad y rendimiento de su instalación que todo esté configurado correctamente. Para ayudarle con ello estamos realizando algunas comprobaciones automáticas. Por favor mire la sección Pistas y Trucos y la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP parece que no está configurado correctamente para solicitar las variables de entorno del sistema. La prueba con getenv(\"PATH\") sólo devuelve una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor revisa la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> para ver notas de configuración de PHP y comprobar la configuración PHP de tu servidor, especialmente cuando se está usando php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Se ha habilitado la configuración de sólo lectura. Esto evita tener que ajustar algunas configuraciones a través de la interfaz web. Además, el archivo debe hacerse modificable manualmente para cada actualización.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP está aparentemente configurado para quitar bloques de documento —'strip inline doc blocks'—. Esto hará que varias aplicaciones principales estén inaccesibles.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Probablemente esto venga a causa de la caché o un acelerador, tales como Zend OPcache o eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Su base de datos no se ejecuta con el nivel de aislamiento de transacción \"READ COMMITTED\" . Ésto puede causar problemas cuando múltiples acciones se ejecutan en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$sestá instalado por debajo de la versión %2$s, por motivos de estabilidad y rendimiento se recomienda actualizar a una versión más moderna de %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Falta el módulo PHP 'fileinfo'. Es muy recomendable activar este módulo para conseguir mejores resultados en la detección de los tipos MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional está desactivado, esto podría conducir a problemas con 'race conditions'. Activa 'filelocking.enabled' en 'config.php' para solucionar esos problemas. Mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No se puede escoger una configuración regional que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivo.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Es muy recomendable instalar los paquetes necesarios para poder soportar una de las siguientes configuraciones regionales: %s. ",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si su instalación no está ubicada en la raíz del dominio y usa el cron del sistema, puede haber problemas al generarse los URL. Para evitarlos, configure la opción \"overwrite.cli.url\" en su archivo config.php para que use la ruta de la raíz del sitio web de su instalación (sugerencia: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible lanzar la tarea cron mediante CLI. Los siguientes errores técnicos has aparecido:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor, compruebe las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación ↗</a>, y compruebe posibles errores o advertencias en el <a href=\"%s\">registro</a>.",
     "All checks passed." : "Ha pasado todos los controles",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo ejecutó %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Hay muchas características y cambios de configuración disponibles para personalizar y usar esta instancia. Aquí hay alugnas indicaciones para más información.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Se está usando actualmente SQLite como motor de base de datos. Para instalaciones más grandes recomendamos cambiar a un motor de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto está especialmente recomendado cuando se utiliza el cliente de escritorio para la sincronización de archivos.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos usa la herramienta de línea de comandos 'occ db:convert-type' o mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer copias de seguridad",
     "Advanced monitoring" : "Monitorización avanzada",
     "Performance tuning" : "Ajuste de rendimiento",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP está aparentemente configurado para eliminar bloques de documentos en línea. Esto hará que varias aplicaciones principales no estén accesibles.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con una versión anterior a %2$s está instalada. Por razones de estabilidad y rendimiento, se recomienda actualizar a una versión de %1$s más reciente .",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "No se ha encontrado el modulo PHP 'fileinfo'. Le recomendamos encarecidamente que habilite este módulo para obtener mejores resultados con la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional está desactivado, esto podría conducir a problemas con 'race conditions'. Activa 'filelocking.enabled' en 'config.php' para solucionar esos problemas. Mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Es muy recomendable instalar los paquetes necesarios para poder soportar una de las siguientes configuraciones regionales: %s. ",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si su instalación no está ubicada en la raíz del dominio y usa el cron del sistema, puede haber problemas al generarse los URL. Para evitarlos, configure la opción \"overwrite.cli.url\" en su archivo config.php para que use la ruta de la raíz del sitio web de su instalación (sugerencia: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar cronjob vía CLI. Han aparecido los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor, compruebe las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación ↗</a>, y compruebe posibles errores o advertencias en el <a href=\"%s\">registro</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Cron se ejecutó por última vez: %s",
     "Last cron job execution: %s. Something seems wrong." : "Cron se ejecutó por última vez: %s. Algo va mal.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio cron del sistema para llamar al archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para ejecutar esto se necesita la extensión posix de PHP. Ver la {linkstart}documentación de PHP{linkend} para más detellas.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir autocompletación del nombre de usuario en diálogos de compartición. Si está deshabilitado, se requiere introducir el nombre de usuario.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos usa la herramienta de línea de comandos 'occ db:convert-type' o mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola:<br><br>Solo queremos hacerle saber que ahora dispone de una cuenta de %s.<br><br>Su usuario: <strong>%s</strong><br>Acceda: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es.json b/settings/l10n/es.json
index 015108fa715..30311ccb314 100644
--- a/settings/l10n/es.json
+++ b/settings/l10n/es.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Avisos de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante para la seguridad y rendimiento de su instalación que todo esté configurado correctamente. Para ayudarle con ello estamos realizando algunas comprobaciones automáticas. Por favor mire la sección Pistas y Trucos y la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP parece que no está configurado correctamente para solicitar las variables de entorno del sistema. La prueba con getenv(\"PATH\") sólo devuelve una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor revisa la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> para ver notas de configuración de PHP y comprobar la configuración PHP de tu servidor, especialmente cuando se está usando php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Se ha habilitado la configuración de sólo lectura. Esto evita tener que ajustar algunas configuraciones a través de la interfaz web. Además, el archivo debe hacerse modificable manualmente para cada actualización.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP está aparentemente configurado para quitar bloques de documento —'strip inline doc blocks'—. Esto hará que varias aplicaciones principales estén inaccesibles.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Probablemente esto venga a causa de la caché o un acelerador, tales como Zend OPcache o eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Su base de datos no se ejecuta con el nivel de aislamiento de transacción \"READ COMMITTED\" . Ésto puede causar problemas cuando múltiples acciones se ejecutan en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$sestá instalado por debajo de la versión %2$s, por motivos de estabilidad y rendimiento se recomienda actualizar a una versión más moderna de %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Falta el módulo PHP 'fileinfo'. Es muy recomendable activar este módulo para conseguir mejores resultados en la detección de los tipos MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional está desactivado, esto podría conducir a problemas con 'race conditions'. Activa 'filelocking.enabled' en 'config.php' para solucionar esos problemas. Mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No se puede escoger una configuración regional que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivo.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Es muy recomendable instalar los paquetes necesarios para poder soportar una de las siguientes configuraciones regionales: %s. ",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si su instalación no está ubicada en la raíz del dominio y usa el cron del sistema, puede haber problemas al generarse los URL. Para evitarlos, configure la opción \"overwrite.cli.url\" en su archivo config.php para que use la ruta de la raíz del sitio web de su instalación (sugerencia: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible lanzar la tarea cron mediante CLI. Los siguientes errores técnicos has aparecido:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor, compruebe las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación ↗</a>, y compruebe posibles errores o advertencias en el <a href=\"%s\">registro</a>.",
     "All checks passed." : "Ha pasado todos los controles",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo ejecutó %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Hay muchas características y cambios de configuración disponibles para personalizar y usar esta instancia. Aquí hay alugnas indicaciones para más información.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Se está usando actualmente SQLite como motor de base de datos. Para instalaciones más grandes recomendamos cambiar a un motor de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto está especialmente recomendado cuando se utiliza el cliente de escritorio para la sincronización de archivos.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos usa la herramienta de línea de comandos 'occ db:convert-type' o mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer copias de seguridad",
     "Advanced monitoring" : "Monitorización avanzada",
     "Performance tuning" : "Ajuste de rendimiento",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP está aparentemente configurado para eliminar bloques de documentos en línea. Esto hará que varias aplicaciones principales no estén accesibles.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con una versión anterior a %2$s está instalada. Por razones de estabilidad y rendimiento, se recomienda actualizar a una versión de %1$s más reciente .",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "No se ha encontrado el modulo PHP 'fileinfo'. Le recomendamos encarecidamente que habilite este módulo para obtener mejores resultados con la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional está desactivado, esto podría conducir a problemas con 'race conditions'. Activa 'filelocking.enabled' en 'config.php' para solucionar esos problemas. Mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Es muy recomendable instalar los paquetes necesarios para poder soportar una de las siguientes configuraciones regionales: %s. ",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si su instalación no está ubicada en la raíz del dominio y usa el cron del sistema, puede haber problemas al generarse los URL. Para evitarlos, configure la opción \"overwrite.cli.url\" en su archivo config.php para que use la ruta de la raíz del sitio web de su instalación (sugerencia: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar cronjob vía CLI. Han aparecido los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor, compruebe las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación ↗</a>, y compruebe posibles errores o advertencias en el <a href=\"%s\">registro</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Cron se ejecutó por última vez: %s",
     "Last cron job execution: %s. Something seems wrong." : "Cron se ejecutó por última vez: %s. Algo va mal.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio cron del sistema para llamar al archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para ejecutar esto se necesita la extensión posix de PHP. Ver la {linkstart}documentación de PHP{linkend} para más detellas.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir autocompletación del nombre de usuario en diálogos de compartición. Si está deshabilitado, se requiere introducir el nombre de usuario.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos usa la herramienta de línea de comandos 'occ db:convert-type' o mira la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola:<br><br>Solo queremos hacerle saber que ahora dispone de una cuenta de %s.<br><br>Su usuario: <strong>%s</strong><br>Acceda: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_AR.js b/settings/l10n/es_AR.js
index ae5a31fea7d..035859724c2 100644
--- a/settings/l10n/es_AR.js
+++ b/settings/l10n/es_AR.js
@@ -246,9 +246,7 @@ OC.L10N.register(
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezcan tener permisos de escritura manualemente en cada actualización. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Su base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Abilite 'filelocking.enabled' en el archivo config.php para evitar problemas. Favor de consultar la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para mayor información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Favor de volver a verificar <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y compruebe que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -281,7 +279,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera optima esta instancia. Aqui hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente está usando SQLite como el backend de base de datos. Para instalaciones más grandes le recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, use la herramienta de la línea de comando 'occ db:convert-type', o consulte la  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -383,10 +380,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño le recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Le recomendamos ámpliamente que habilite este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Abilite 'filelocking.enabled' en el archivo config.php para evitar problemas. Favor de consultar la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para mayor información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Le sugerimos ámpliamente instalar en su sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si su instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, favor de establecer la opción \"overwrite.cli.url\" en su archivo config.php al la ruta del webroot de su instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Favor de volver a verificar <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y compruebe que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -395,6 +394,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto usted necesita la extensión posix de PHP.  Favor de consultar la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, use la herramienta de la línea de comando 'occ db:convert-type', o consulte la  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarle que ahora usted tiene una cuenta %s.<br><br> Su nombre de usuario es: <strong>%s</strong> <br>Ingrese a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_AR.json b/settings/l10n/es_AR.json
index 534f89c71b2..ddc0e249690 100644
--- a/settings/l10n/es_AR.json
+++ b/settings/l10n/es_AR.json
@@ -244,9 +244,7 @@
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezcan tener permisos de escritura manualemente en cada actualización. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Su base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Abilite 'filelocking.enabled' en el archivo config.php para evitar problemas. Favor de consultar la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para mayor información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Favor de volver a verificar <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y compruebe que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -279,7 +277,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera optima esta instancia. Aqui hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente está usando SQLite como el backend de base de datos. Para instalaciones más grandes le recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, use la herramienta de la línea de comando 'occ db:convert-type', o consulte la  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -381,10 +378,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño le recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Le recomendamos ámpliamente que habilite este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Abilite 'filelocking.enabled' en el archivo config.php para evitar problemas. Favor de consultar la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para mayor información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Le sugerimos ámpliamente instalar en su sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si su instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, favor de establecer la opción \"overwrite.cli.url\" en su archivo config.php al la ruta del webroot de su instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Favor de volver a verificar <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y compruebe que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -393,6 +392,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto usted necesita la extensión posix de PHP.  Favor de consultar la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, use la herramienta de la línea de comando 'occ db:convert-type', o consulte la  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarle que ahora usted tiene una cuenta %s.<br><br> Su nombre de usuario es: <strong>%s</strong> <br>Ingrese a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_CO.js b/settings/l10n/es_CO.js
index 64396e1cfc8..5525e62563c 100644
--- a/settings/l10n/es_CO.js
+++ b/settings/l10n/es_CO.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_CO.json b/settings/l10n/es_CO.json
index 213f6bb1da2..72428b607ea 100644
--- a/settings/l10n/es_CO.json
+++ b/settings/l10n/es_CO.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_CR.js b/settings/l10n/es_CR.js
index 64396e1cfc8..5525e62563c 100644
--- a/settings/l10n/es_CR.js
+++ b/settings/l10n/es_CR.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_CR.json b/settings/l10n/es_CR.json
index 213f6bb1da2..72428b607ea 100644
--- a/settings/l10n/es_CR.json
+++ b/settings/l10n/es_CR.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_DO.js b/settings/l10n/es_DO.js
index 64396e1cfc8..5525e62563c 100644
--- a/settings/l10n/es_DO.js
+++ b/settings/l10n/es_DO.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_DO.json b/settings/l10n/es_DO.json
index 213f6bb1da2..72428b607ea 100644
--- a/settings/l10n/es_DO.json
+++ b/settings/l10n/es_DO.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_EC.js b/settings/l10n/es_EC.js
index 64396e1cfc8..5525e62563c 100644
--- a/settings/l10n/es_EC.js
+++ b/settings/l10n/es_EC.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_EC.json b/settings/l10n/es_EC.json
index 213f6bb1da2..72428b607ea 100644
--- a/settings/l10n/es_EC.json
+++ b/settings/l10n/es_EC.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_MX.js b/settings/l10n/es_MX.js
index 64396e1cfc8..5525e62563c 100644
--- a/settings/l10n/es_MX.js
+++ b/settings/l10n/es_MX.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/es_MX.json b/settings/l10n/es_MX.json
index 213f6bb1da2..72428b607ea 100644
--- a/settings/l10n/es_MX.json
+++ b/settings/l10n/es_MX.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Advertencias de seguridad y configuración",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Es importante que todo esté configurado correctamente por la seguridad y desempeño de tu instancia. Para ayudarte con esto, estamos haciendo unas validaciones automáticas. Por favor ve la sección de Consejos y Trucos así como la documentación para más información.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP no parece estar configurado correctamente para consultar las variables de ambiente. La prueba con getenv(\"PATH\") sólo regresa una respuesta vacía.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Por favor verifica la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación de instalación ↗</a> en relación a las notas de configuración de PHP y la configuración de PHP en tu servidorr, especialmente cuando se usa php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuración de Sólo Lectura ha sido habilitada. Esto previene establecer algunas configuraciones mediante la interface web. Adicionalmente, el archivo necesita que se le establezca tener permisos de escritura manualmente en cada actualización. ",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques internos de documentación. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Esto es posiblemente causado por un caché/acelerador tal como Zend OPcache o eAccelerator.  ",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Tu base de datos no puede correr con el nivel de aislamiento de transacción de \"READ COMMITTED\".  Puede causar problemas cuando mútiples acciones sean ejecutadas en paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s más reciente. ",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Recomendamos ámpliamente que se habilite este módulo para obtener los mejores resultados en la detección de tipos MIME",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "System locale can not be set to a one which supports UTF-8." : "No es posible establecer la regionalización del sistema a una que soporte UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de archivos. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Se recomienda ámpliamente instalar los paquetes requeridos en tu sistema para soportar alguna de las siguientes regionalizaciones: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalación no se hizo en la raíz del dominio y usa el sistema Cron, puede haber temas con la generación de la URL. Para prevenir estos problemas, por favor establece la opción  \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "No fue posible ejecutar el trabajo de cron via CLI. Se presentaron los siguientes errores técnicos:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "All checks passed." : "Pasaron todas las verificaciones. ",
     "Background jobs" : "Trabajos en segundo plano",
     "Last job ran %s." : "El último trabajo corrió %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Existen muchas funcionalidades y configuraciones disponibles para personalizar y usar de manera óptima esta instancia. Aquí hay algunos consejos para más información. ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Actualmente estás usando SQLite como el backend de base de datos. Para instalaciones más grandes te recomendamos cambiar a un backend de base de datos diferente.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Esto es particularmente recomendado cuando se usa el cliente de escritorio para sincronización de archivos. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "How to do backups" : "Cómo hacer respaldos",
     "Advanced monitoring" : "Monitoreo avanzado",
     "Performance tuning" : "Optimización de rendimiento",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Al parecer PHP está configurado para quitar los bloques de comentarios internos. Esto hará que varias aplicaciones principales sean inaccesibles. ",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s con versión inferior a %2$s está instalado, por razones de estabilidad y desempeño te recomendamos actualizar a una versión de %1$s mas reciente. ",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "El modulo PHP 'fileinfo' no ha sido encontrado. Te recomendamos ámpliamente que habilites este módulo para obtener los mejores resultados en la detección de tipos MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "El bloqueo de archivos transaccional se encuentra deshabilitado, esto puede generar temas bajo ciertas condiciones. Habilita 'filelocking.enabled' en el archivo config.php para evitar problemas. Por favor consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatcón ↗</a> para más información.",
     "This means that there might be problems with certain characters in file names." : "Esto significa que puede haber problemas con ciertos caracteres en los nombres de los archivos.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Te sugerimos ámpliamente instalar en tu sistema los paquetes requeridos para soportar alguno de los sigueintes locales: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si tu instalacion no fue hecha en la raíz del dominio y usa el cron del sistema, pueden presentarse temas con la generación de URLs. Para evitar estos problemas, por favor establece la opción \"overwrite.cli.url\" en tu archivo config.php a la ruta del webroot de tu instalación (Se sugiere : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "No fue posible ejecutar la tarea de cron con CLI. Se presentaron los siguientes errores técnicos:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor vuelve a verificar las <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guías de instalación↗</a>, y comprueba que no haya errores o advertenicas en la <a href=\"%s\">bitácora</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última ejecución de tareas de cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última ejecución de tareas de cron: %s. Algo parece estar mal. ",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar el servicio de cron del sistema para llamar el archivo cron.php cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para correr esto necesitas la extensión posix de PHP. Por favor consulta la {linkstart}documentación de PHP{linkend} para más detalles. ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir auto-completar el nombre de usuario en la ventana de diálogo. Si esta opción está deshabilitada, el nombre de usuario completo debe ser ingresado.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar a otra base de datos, usa la herramienta de la línea de comando 'occ db:convert-type', o consulta la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentación ↗</a>.",
     "Uninstall app" : "Desinstalar la aplicación",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hola,<br><br> sólo queremos informarte que ahora tienes una cuenta %s.<br><br> Tu usuario es: <strong>%s</strong> <br>Ingresa a ella: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "¡Saludos!",
diff --git a/settings/l10n/eu.js b/settings/l10n/eu.js
index 3748978398b..a958a08247e 100644
--- a/settings/l10n/eu.js
+++ b/settings/l10n/eu.js
@@ -251,14 +251,12 @@ OC.L10N.register(
     "Security & setup warnings" : "Segurtasun eta konfigurazio abisuak",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Zure instantzia ondo konfiguratzea garrantzitsua da segurasun eta errendimendurako. Honekin laguntzeko test automatiko batzuk garatzen ari gara. Dokumentazioaren Tips & Tricks atala ikusi informazio gehiagorako. ",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : " Sistemako ingurune aldagaiak atzitzeko PHP ez dago ondo konfiguratua. getenv(\"PATH\") testeatzean erantzun hutsa jasotzen da. ",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalazio dokumentazioa ↗</a> begiratu PHP konfigurazio oharrak eta zerbitzariaren PHP konfigurazioa ulertzeko, batez ere php-fpm  erabiltzen bada",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Bakarrik irakurtzeko konfigurazioa gaitu da. Honek web-interfazearen bidez konfigurazio batzuk aldatzea ekiditzen du. Are gehiago, fitxategia eskuz ezarri behar da idazteko moduan eguneraketa bakoitzerako.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP lerro bakarreko blokeak mozteko konfiguratua dagoela dirudi. Oinarrizko app batzuk eskuraezin bihurtuko dira.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Hau ziur aski cache/accelerator batek eragin du, hala nola Zend OPcache edo eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Zure datubaseak ez du \"READ COMMITTED\" transakzio isolamendu mailarik. Honek arazoak sor dezake paraleloki ekintza asko exekutatzen badira. ",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$aren %2 bertsio zaharkitua instalatua dago, egonkortasun eta errendimendu arrazoiak medio, %1 bertsiora eguneratzea gomendatzen da.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "'fileinfo' PHP modulua falta da. Modulu hau gaitzea bereziki gomendatzen da, MIME moten detekzioan emaitzarik hoberenak edukitzeko.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Fitxategien blokeo transakzionala desgaituta dago, eta lasterketa baldintzak gerta daitezke. config.php fitxategiko 'filelocking.enable' gaitu arazo hauek ekiditeko. <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentazioa ↗</a> kontsultatu informazio gehiagorako.",
     "System locale can not be set to a one which supports UTF-8." : "Eskualdeko ezarpena ezin da UTF-8 onartzen duen batera ezarri.",
     "This means that there might be problems with certain characters in filenames." : "Honek fitxategi izenen karaktere batzuekin arazoak egon daitezkeela esan nahi du. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Ondoko lokalizazioentzako euskarria izateko, zure sisteman beharrezko paketeak instalatzea bereziki gomendatzen da:  %s.",
@@ -290,7 +288,6 @@ OC.L10N.register(
     "Exclude groups from sharing" : "Baztertu taldeak partekatzean",
     "These groups will still be able to receive shares, but not to initiate them." : "Talde hauek oraindik jaso ahal izango dute partekatzeak, baina ezingo dute partekatu",
     "Tips & tricks" : "Aholkuak eta trikimailuak",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "How to do backups" : "Nola egin babes kopiak",
     "Advanced monitoring" : "Monitorizazio aurreratua",
     "Performance tuning" : "Errendimendu ezarpenak",
@@ -393,6 +390,7 @@ OC.L10N.register(
     "php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP sistemaren ingurune aldagaiak atzitzeko ez dago ondo konfiguratua.getenv(\"PATH\") testak erantzun hutsa itzultzen du. ",
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Badirudi PHP konfiguratuta dagoela lineako dokumentu blokeak aldatzeko. Honek zenbait oinarrizko aplikazio eskuraezin bihurtuko ditu.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP 'fileinfo' modulua falta da. Modulu hau gaitzea aholkatzen dizugu mime-type ezberdinak hobe detektatzeko.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Fitxategien blokeo transakzionala desgaituta dago, eta lasterketa baldintzak gerta daitezke. config.php fitxategiko 'filelocking.enable' gaitu arazo hauek ekiditeko. <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentazioa ↗</a> kontsultatu informazio gehiagorako.",
     "This means that there might be problems with certain characters in file names." : "Honek esan nahi du fitxategien izenetako karaktere batzuekin arazoak egon daitezkeela.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Biziki gomendatzen dizugu beharrezkoak diren paketea zure sisteman instalatzea honi euskarria eman ahal izateko: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Zure instalazioa ez badago domeinuaren sustraian egina eta erabiltzen badu sistemaren cron-a, arazoak izan daitezke URL sorreran. Arazo horiek saihesteko ezarri  \"overwrite.cli.url\" opzioa zure config.php fitxategian zure instalazioaren webroot bidera (Proposatua: \"%s\")",
@@ -405,6 +403,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Erabili sistemaren cron zerbitzua deitzeko cron.php fitxategia 15 minutuan behin.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Hau exekutatzeko PHPko posix luzapena behar duzu. Xehetasun gehiagorako {linkstart}PHP dokumentazioa{linkend} kontsulta ezazu ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Onartu elkarbanatze elkarrizketan, erabiltzaile osatze automatikoa. Desgaituta badago, erabiltzaile izena osoa sartu behar da.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "Uninstall app" : "Desinstalatu aplikazioa",
     "Cheers!" : "Ongi izan!",
     "Hey there,\n\njust letting you know that you now have a %s account.\n\nYour username: %s\nAccess it: %s\n\n" : "Kaixo,\n\nJakinarazi nahi dizugu, badaukazula %s kontua.\n\nZure erabiltzaile izena: %s \nSar zaitez: %s\n",
diff --git a/settings/l10n/eu.json b/settings/l10n/eu.json
index 96c09852d00..64ead78c585 100644
--- a/settings/l10n/eu.json
+++ b/settings/l10n/eu.json
@@ -249,14 +249,12 @@
     "Security & setup warnings" : "Segurtasun eta konfigurazio abisuak",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Zure instantzia ondo konfiguratzea garrantzitsua da segurasun eta errendimendurako. Honekin laguntzeko test automatiko batzuk garatzen ari gara. Dokumentazioaren Tips & Tricks atala ikusi informazio gehiagorako. ",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : " Sistemako ingurune aldagaiak atzitzeko PHP ez dago ondo konfiguratua. getenv(\"PATH\") testeatzean erantzun hutsa jasotzen da. ",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">instalazio dokumentazioa ↗</a> begiratu PHP konfigurazio oharrak eta zerbitzariaren PHP konfigurazioa ulertzeko, batez ere php-fpm  erabiltzen bada",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Bakarrik irakurtzeko konfigurazioa gaitu da. Honek web-interfazearen bidez konfigurazio batzuk aldatzea ekiditzen du. Are gehiago, fitxategia eskuz ezarri behar da idazteko moduan eguneraketa bakoitzerako.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP lerro bakarreko blokeak mozteko konfiguratua dagoela dirudi. Oinarrizko app batzuk eskuraezin bihurtuko dira.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Hau ziur aski cache/accelerator batek eragin du, hala nola Zend OPcache edo eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Zure datubaseak ez du \"READ COMMITTED\" transakzio isolamendu mailarik. Honek arazoak sor dezake paraleloki ekintza asko exekutatzen badira. ",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$aren %2 bertsio zaharkitua instalatua dago, egonkortasun eta errendimendu arrazoiak medio, %1 bertsiora eguneratzea gomendatzen da.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "'fileinfo' PHP modulua falta da. Modulu hau gaitzea bereziki gomendatzen da, MIME moten detekzioan emaitzarik hoberenak edukitzeko.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Fitxategien blokeo transakzionala desgaituta dago, eta lasterketa baldintzak gerta daitezke. config.php fitxategiko 'filelocking.enable' gaitu arazo hauek ekiditeko. <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentazioa ↗</a> kontsultatu informazio gehiagorako.",
     "System locale can not be set to a one which supports UTF-8." : "Eskualdeko ezarpena ezin da UTF-8 onartzen duen batera ezarri.",
     "This means that there might be problems with certain characters in filenames." : "Honek fitxategi izenen karaktere batzuekin arazoak egon daitezkeela esan nahi du. ",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Ondoko lokalizazioentzako euskarria izateko, zure sisteman beharrezko paketeak instalatzea bereziki gomendatzen da:  %s.",
@@ -288,7 +286,6 @@
     "Exclude groups from sharing" : "Baztertu taldeak partekatzean",
     "These groups will still be able to receive shares, but not to initiate them." : "Talde hauek oraindik jaso ahal izango dute partekatzeak, baina ezingo dute partekatu",
     "Tips & tricks" : "Aholkuak eta trikimailuak",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "How to do backups" : "Nola egin babes kopiak",
     "Advanced monitoring" : "Monitorizazio aurreratua",
     "Performance tuning" : "Errendimendu ezarpenak",
@@ -391,6 +388,7 @@
     "php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP sistemaren ingurune aldagaiak atzitzeko ez dago ondo konfiguratua.getenv(\"PATH\") testak erantzun hutsa itzultzen du. ",
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Badirudi PHP konfiguratuta dagoela lineako dokumentu blokeak aldatzeko. Honek zenbait oinarrizko aplikazio eskuraezin bihurtuko ditu.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP 'fileinfo' modulua falta da. Modulu hau gaitzea aholkatzen dizugu mime-type ezberdinak hobe detektatzeko.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Fitxategien blokeo transakzionala desgaituta dago, eta lasterketa baldintzak gerta daitezke. config.php fitxategiko 'filelocking.enable' gaitu arazo hauek ekiditeko. <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentazioa ↗</a> kontsultatu informazio gehiagorako.",
     "This means that there might be problems with certain characters in file names." : "Honek esan nahi du fitxategien izenetako karaktere batzuekin arazoak egon daitezkeela.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Biziki gomendatzen dizugu beharrezkoak diren paketea zure sisteman instalatzea honi euskarria eman ahal izateko: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Zure instalazioa ez badago domeinuaren sustraian egina eta erabiltzen badu sistemaren cron-a, arazoak izan daitezke URL sorreran. Arazo horiek saihesteko ezarri  \"overwrite.cli.url\" opzioa zure config.php fitxategian zure instalazioaren webroot bidera (Proposatua: \"%s\")",
@@ -403,6 +401,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Erabili sistemaren cron zerbitzua deitzeko cron.php fitxategia 15 minutuan behin.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Hau exekutatzeko PHPko posix luzapena behar duzu. Xehetasun gehiagorako {linkstart}PHP dokumentazioa{linkend} kontsulta ezazu ",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Onartu elkarbanatze elkarrizketan, erabiltzaile osatze automatikoa. Desgaituta badago, erabiltzaile izena osoa sartu behar da.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "Uninstall app" : "Desinstalatu aplikazioa",
     "Cheers!" : "Ongi izan!",
     "Hey there,\n\njust letting you know that you now have a %s account.\n\nYour username: %s\nAccess it: %s\n\n" : "Kaixo,\n\nJakinarazi nahi dizugu, badaukazula %s kontua.\n\nZure erabiltzaile izena: %s \nSar zaitez: %s\n",
diff --git a/settings/l10n/fi.js b/settings/l10n/fi.js
index 25da4e4456e..c7f4da3c79c 100644
--- a/settings/l10n/fi.js
+++ b/settings/l10n/fi.js
@@ -248,7 +248,6 @@ OC.L10N.register(
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-moduuli 'fileinfo' puuttuu. Suosittelemme kyseisen moduulin ottamista käyttöön, jotta MIME-tyyppien havaitseminen toimii parhaalla mahdollisella tavalla.",
     "System locale can not be set to a one which supports UTF-8." : "Järjestelmän maa-asetusta ei voi asettaa UTF-8:aa tukevaksi.",
     "This means that there might be problems with certain characters in filenames." : "Tämä tarkoittaa, että jotkin merkit saattavat aiheuttaa ongelmia tiedostojen nimissä.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Tutustu huolellisesti <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">asennusohjeisiin ↗</a> ja tarkista <a href=\"%s\">lokitiedostosta</a> mahdolliset virheet ja varoitukset.",
     "All checks passed." : "Läpäistiin kaikki tarkistukset.",
     "Background jobs" : "Taustatyöt",
     "Last job ran %s." : "Viimeisin työ suoritettu %s.",
@@ -388,6 +387,7 @@ OC.L10N.register(
     "This means that there might be problems with certain characters in file names." : "Tämä tarkoittaa, että tiettyjen merkkien kanssa tiedostojen nimissä saattaa olla ongelmia.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Suosittelemme asentamaan vaaditut paketit järjestelmään, jotta järjestelmässä on tuki yhdelle seuraavista maa-asetuksista: %s.",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Cron-työn suorittaminen komentorivin kautta ei onnistunut. Ilmeni seuraavia teknisiä virheitä:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Tutustu huolellisesti <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">asennusohjeisiin ↗</a> ja tarkista <a href=\"%s\">lokitiedostosta</a> mahdolliset virheet ja varoitukset.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Viimeisin cron-työn suoritus: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Viimeisin cron-työn suoritus: %s. Jokin vaikuttaa menneen pieleen.",
diff --git a/settings/l10n/fi.json b/settings/l10n/fi.json
index e63fd75855f..49b1e83ef4c 100644
--- a/settings/l10n/fi.json
+++ b/settings/l10n/fi.json
@@ -246,7 +246,6 @@
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-moduuli 'fileinfo' puuttuu. Suosittelemme kyseisen moduulin ottamista käyttöön, jotta MIME-tyyppien havaitseminen toimii parhaalla mahdollisella tavalla.",
     "System locale can not be set to a one which supports UTF-8." : "Järjestelmän maa-asetusta ei voi asettaa UTF-8:aa tukevaksi.",
     "This means that there might be problems with certain characters in filenames." : "Tämä tarkoittaa, että jotkin merkit saattavat aiheuttaa ongelmia tiedostojen nimissä.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Tutustu huolellisesti <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">asennusohjeisiin ↗</a> ja tarkista <a href=\"%s\">lokitiedostosta</a> mahdolliset virheet ja varoitukset.",
     "All checks passed." : "Läpäistiin kaikki tarkistukset.",
     "Background jobs" : "Taustatyöt",
     "Last job ran %s." : "Viimeisin työ suoritettu %s.",
@@ -386,6 +385,7 @@
     "This means that there might be problems with certain characters in file names." : "Tämä tarkoittaa, että tiettyjen merkkien kanssa tiedostojen nimissä saattaa olla ongelmia.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Suosittelemme asentamaan vaaditut paketit järjestelmään, jotta järjestelmässä on tuki yhdelle seuraavista maa-asetuksista: %s.",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Cron-työn suorittaminen komentorivin kautta ei onnistunut. Ilmeni seuraavia teknisiä virheitä:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Tutustu huolellisesti <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">asennusohjeisiin ↗</a> ja tarkista <a href=\"%s\">lokitiedostosta</a> mahdolliset virheet ja varoitukset.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Viimeisin cron-työn suoritus: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Viimeisin cron-työn suoritus: %s. Jokin vaikuttaa menneen pieleen.",
diff --git a/settings/l10n/fr.js b/settings/l10n/fr.js
index 5ca8bb016c3..e41ff81c218 100644
--- a/settings/l10n/fr.js
+++ b/settings/l10n/fr.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Avertissements de sécurité & configuration",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Il est important pour la sécurité et la performance de votre instance que tout soit configuré correctement. Pour vous aider dans cette tâche, nous faisons des vérifications automatiques. Veuillez consulter la section Trucs et Astuces et la documentation pour plus d'informations.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP ne semble pas être configuré de manière à récupérer les valeurs des variables d’environnement. Le test de la commande getenv(\"PATH\") retourne seulement une réponse vide. ",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Veuillez consulter <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">la documentation d'installation ↗</a> pour savoir comment configurer PHP sur votre serveur, en particulier en cas d'utilisation de php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuration est en mode lecture seule. Ceci empêche la modification de certaines configurations via l'interface web. De plus, le fichier doit être passé manuellement en lecture-écriture avant chaque mise à jour.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP semble configuré de manière à supprimer les blocs PHPdoc du code. Cela rendra plusieurs applications de base inaccessibles.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "La raison est probablement l'utilisation d'un cache / accélérateur tel que Zend OPcache ou eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Votre base de données ne fonctionne pas avec le niveau d'isolation de transaction \"READ COMMITED\". Ceci peut causer des problèmes quand plusieurs actions sont exécutées en parallèle.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "Une version de %1$s plus ancienne que %2$s est installée. Afin d'améliorer la stabilité et les performances de votre instance Nextcloud, il est recommandé de mettre %1$s à jour.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Le module PHP 'fileinfo' est manquant. Il est vivement recommandé de l'activer afin d'obtenir les meilleurs résultats de détection du type MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Le verrouillage transactionnel de fichiers est désactivé. Cela peut causer des conflits en cas d'accès concurrent. Configurez 'filelocking.enabled' dans config.php pour éviter ces problèmes. Consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> pour plus d'informations.",
     "System locale can not be set to a one which supports UTF-8." : "Les paramètres régionaux n'ont pu être configurés avec prise en charge d'UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Cela signifie qu'il pourrait y avoir des problèmes avec certains caractères dans les noms de fichier.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Il est fortement recommandé d'installer sur votre système les paquets nécessaires à la prise en charge de l'un des paramètres régionaux suivants : %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si votre installation n'a pas été effectuée à la racine du domaine et qu'elle utilise le Cron du système, il peut y avoir des problèmes avec la génération d'URL. Pour les éviter, veuillez configurer l'option \"overwrite.cli.url\" de votre fichier config.php avec le chemin de la racine de votre installation (suggéré : \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "La tâche cron n'a pu s'exécuter via CLI. Ces erreurs techniques sont apparues :",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Merci de consulter les <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guides d'installation ↗</a> et de vérifier les erreurs ou avertissements des <a href=\"%s\">logs</a> de cette instance.",
     "All checks passed." : "Tous les tests ont réussi.",
     "Background jobs" : "Tâches de fond",
     "Last job ran %s." : "Dernière tâche exécutée %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Il y a beaucoup de fonctionnalités et de choix de configurations disponibles qui permettent de manière optimale de customiser et d'utiliser cette instance. Voici quelques liens pour en savoir plus.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite est actuellement utilisé comme système de gestion de base de données. Pour des installations plus volumineuses, nous vous recommandons de migrer vers un autre système de gestion de base de données.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "C'est particulièrement recommandé lorsque l'on utilise un client bureau pour la synchronisation des fichiers.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pour migrer vers un autre type de base de données, utilisez la ligne de commande : 'occ db:convert-type' ou consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "How to do backups" : "Comment faire des sauvegardes",
     "Advanced monitoring" : "Surveillance avancée",
     "Performance tuning" : "Ajustement des performances",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP est apparemment configuré pour supprimer les blocs de documentation internes. Cela rendra plusieurs applications de base inaccessibles.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "Une version de %1$s plus ancienne que %2$s est installée. Pour améliorer la stabilité et les performances, nous recommandons de mettre %1$s à jour.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Le module PHP 'fileinfo' est manquant. Il est vivement recommandé de l'activer afin d'obtenir de meilleurs résultats de détection mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Le verrouillage transactionnel de fichiers est désactivé. Cela peut causer des conflits en cas d'accès concurrent. Configurez 'filelocking.enabled' dans config.php pour éviter ces problèmes. Consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> pour plus d'informations.",
     "This means that there might be problems with certain characters in file names." : "Cela signifie qu'il pourrait y avoir des problèmes avec certains caractères dans les noms de fichier.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Nous vous recommandons d'installer sur votre système les paquets nécessaires à la prise en charge de l'un des paramètres régionaux suivants : %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si votre installation n'a pas été effectuée à la racine du domaine et qu'elle utilise le cron du système, il peut y avoir des problèmes avec la génération d'URL. Pour les éviter, veuillez configurer l'option \"overwrite.cli.url\" de votre fichier config.php avec le chemin de la racine de votre installation (suggéré : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "La tâche cron n'a pu s'exécuter via CLI. Ces erreurs techniques sont apparues :",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Merci de consulter les <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guides d'installation ↗</a> et de vérifier les erreurs ou avertissements des <a href=\"%s\">logs</a> de cette instance.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Dernière tâche cron exécutée : %s.",
     "Last cron job execution: %s. Something seems wrong." : "Dernière tâche cron exécutée : %s. Quelque chose s'est mal passé.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Utilisez le service cron du système pour appeler le fichier cron.php toutes les 15 minutes.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Pour l'exécuter, vous devez avoir l'extension PHP posix. Regarder la {linkstart}documentation PHP{linkend} pour plus de détails.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Activer l'autocomplétion des noms d'utilisateurs dans la fenêtre de partage. Si cette option est désactivée,  les noms complets doivent être indiqués.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pour migrer vers un autre type de base de données, utilisez la ligne de commande : 'occ db:convert-type' ou consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "Uninstall app" : "Désinstaller l'application",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Bonjour,<br><br>Un compte %s a été créé pour vous.<br><br>Votre nom d'utilisateur est : <strong>%s</strong><br>Visitez votre compte : <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "À bientôt !",
diff --git a/settings/l10n/fr.json b/settings/l10n/fr.json
index 24737a6cb5b..aeef9f31588 100644
--- a/settings/l10n/fr.json
+++ b/settings/l10n/fr.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Avertissements de sécurité & configuration",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Il est important pour la sécurité et la performance de votre instance que tout soit configuré correctement. Pour vous aider dans cette tâche, nous faisons des vérifications automatiques. Veuillez consulter la section Trucs et Astuces et la documentation pour plus d'informations.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP ne semble pas être configuré de manière à récupérer les valeurs des variables d’environnement. Le test de la commande getenv(\"PATH\") retourne seulement une réponse vide. ",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Veuillez consulter <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">la documentation d'installation ↗</a> pour savoir comment configurer PHP sur votre serveur, en particulier en cas d'utilisation de php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configuration est en mode lecture seule. Ceci empêche la modification de certaines configurations via l'interface web. De plus, le fichier doit être passé manuellement en lecture-écriture avant chaque mise à jour.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP semble configuré de manière à supprimer les blocs PHPdoc du code. Cela rendra plusieurs applications de base inaccessibles.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "La raison est probablement l'utilisation d'un cache / accélérateur tel que Zend OPcache ou eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Votre base de données ne fonctionne pas avec le niveau d'isolation de transaction \"READ COMMITED\". Ceci peut causer des problèmes quand plusieurs actions sont exécutées en parallèle.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "Une version de %1$s plus ancienne que %2$s est installée. Afin d'améliorer la stabilité et les performances de votre instance Nextcloud, il est recommandé de mettre %1$s à jour.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Le module PHP 'fileinfo' est manquant. Il est vivement recommandé de l'activer afin d'obtenir les meilleurs résultats de détection du type MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Le verrouillage transactionnel de fichiers est désactivé. Cela peut causer des conflits en cas d'accès concurrent. Configurez 'filelocking.enabled' dans config.php pour éviter ces problèmes. Consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> pour plus d'informations.",
     "System locale can not be set to a one which supports UTF-8." : "Les paramètres régionaux n'ont pu être configurés avec prise en charge d'UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Cela signifie qu'il pourrait y avoir des problèmes avec certains caractères dans les noms de fichier.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Il est fortement recommandé d'installer sur votre système les paquets nécessaires à la prise en charge de l'un des paramètres régionaux suivants : %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si votre installation n'a pas été effectuée à la racine du domaine et qu'elle utilise le Cron du système, il peut y avoir des problèmes avec la génération d'URL. Pour les éviter, veuillez configurer l'option \"overwrite.cli.url\" de votre fichier config.php avec le chemin de la racine de votre installation (suggéré : \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "La tâche cron n'a pu s'exécuter via CLI. Ces erreurs techniques sont apparues :",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Merci de consulter les <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guides d'installation ↗</a> et de vérifier les erreurs ou avertissements des <a href=\"%s\">logs</a> de cette instance.",
     "All checks passed." : "Tous les tests ont réussi.",
     "Background jobs" : "Tâches de fond",
     "Last job ran %s." : "Dernière tâche exécutée %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Il y a beaucoup de fonctionnalités et de choix de configurations disponibles qui permettent de manière optimale de customiser et d'utiliser cette instance. Voici quelques liens pour en savoir plus.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite est actuellement utilisé comme système de gestion de base de données. Pour des installations plus volumineuses, nous vous recommandons de migrer vers un autre système de gestion de base de données.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "C'est particulièrement recommandé lorsque l'on utilise un client bureau pour la synchronisation des fichiers.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pour migrer vers un autre type de base de données, utilisez la ligne de commande : 'occ db:convert-type' ou consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "How to do backups" : "Comment faire des sauvegardes",
     "Advanced monitoring" : "Surveillance avancée",
     "Performance tuning" : "Ajustement des performances",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP est apparemment configuré pour supprimer les blocs de documentation internes. Cela rendra plusieurs applications de base inaccessibles.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "Une version de %1$s plus ancienne que %2$s est installée. Pour améliorer la stabilité et les performances, nous recommandons de mettre %1$s à jour.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Le module PHP 'fileinfo' est manquant. Il est vivement recommandé de l'activer afin d'obtenir de meilleurs résultats de détection mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Le verrouillage transactionnel de fichiers est désactivé. Cela peut causer des conflits en cas d'accès concurrent. Configurez 'filelocking.enabled' dans config.php pour éviter ces problèmes. Consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> pour plus d'informations.",
     "This means that there might be problems with certain characters in file names." : "Cela signifie qu'il pourrait y avoir des problèmes avec certains caractères dans les noms de fichier.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Nous vous recommandons d'installer sur votre système les paquets nécessaires à la prise en charge de l'un des paramètres régionaux suivants : %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Si votre installation n'a pas été effectuée à la racine du domaine et qu'elle utilise le cron du système, il peut y avoir des problèmes avec la génération d'URL. Pour les éviter, veuillez configurer l'option \"overwrite.cli.url\" de votre fichier config.php avec le chemin de la racine de votre installation (suggéré : \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "La tâche cron n'a pu s'exécuter via CLI. Ces erreurs techniques sont apparues :",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Merci de consulter les <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guides d'installation ↗</a> et de vérifier les erreurs ou avertissements des <a href=\"%s\">logs</a> de cette instance.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Dernière tâche cron exécutée : %s.",
     "Last cron job execution: %s. Something seems wrong." : "Dernière tâche cron exécutée : %s. Quelque chose s'est mal passé.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Utilisez le service cron du système pour appeler le fichier cron.php toutes les 15 minutes.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Pour l'exécuter, vous devez avoir l'extension PHP posix. Regarder la {linkstart}documentation PHP{linkend} pour plus de détails.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Activer l'autocomplétion des noms d'utilisateurs dans la fenêtre de partage. Si cette option est désactivée,  les noms complets doivent être indiqués.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Pour migrer vers un autre type de base de données, utilisez la ligne de commande : 'occ db:convert-type' ou consultez la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>.",
     "Uninstall app" : "Désinstaller l'application",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Bonjour,<br><br>Un compte %s a été créé pour vous.<br><br>Votre nom d'utilisateur est : <strong>%s</strong><br>Visitez votre compte : <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "À bientôt !",
diff --git a/settings/l10n/he.js b/settings/l10n/he.js
index 6beda29443a..4e5f87f1084 100644
--- a/settings/l10n/he.js
+++ b/settings/l10n/he.js
@@ -139,7 +139,6 @@ OC.L10N.register(
     "Security & setup warnings" : "הזהרות אבטחה והתקנה",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "תצורת קריאה בלבד הופעלה. תצורה זו מונעת קביעת מספר הגדרות באמצעות ממשק האינטרנט. יתר על כן, יש צורך להגדיר ההרשאות כתיבה באופן ידני לכל עדכון.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "זה ככל הנראה נגרם על ידי מאיץ/מטמון כמו Zend OPcache או eAccelerator.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "נעילת קבצים בפעולות מושבתת, זה עלול להוביל לבעיות גרסאות תזמון. יש לאפשר 'filelocking.enabled' בקובץ config.php למניעת בעיות אלו. ניתן לראות מידע נוסף ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "הגדרות שפה לא יכולות להקבע ככאלה שתומכות ב- UTF-8.",
     "All checks passed." : "כל הבדיקות עברו",
     "Execute one task with each page loaded" : "יש להפעיל משימה אחת עם כל עמוד שנטען",
@@ -159,7 +158,6 @@ OC.L10N.register(
     "Exclude groups from sharing" : "מניעת קבוצות משיתוף",
     "These groups will still be able to receive shares, but not to initiate them." : "קבוצות אלו עדיין יוכלו לקבל שיתופים, אך לא לשתף בעצמם.",
     "Tips & tricks" : "עצות ותחבולות",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "למעבר למסד נתונים אחר יש להשתמש בכלי שורת פקודה: 'occ db:convert-type', או לעיין ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד↗</a>.",
     "How to do backups" : "איך לבצע גיבויים",
     "Advanced monitoring" : "ניטור מתקדם",
     "Performance tuning" : "כוונון ביצועים",
@@ -234,6 +232,7 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP מוגדר ככל הנראה להפשיט בלוקי קוד. מצב זה יגרום למספר יישומי ליבה להיות לא נגישים.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s מתחת לגרסה %2$s מותקנת, מסיבות יציבות וביצועים אנו ממליצים לעדכן לגרסה חדשה יותר גרסה %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "מודול ה- PHP מסוג 'fileinfo' חסר. אנו ממליצים בחום לאפשר מודול זה כדי לקבל תוצאות מיטביות עם גילוי mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "נעילת קבצים בפעולות מושבתת, זה עלול להוביל לבעיות גרסאות תזמון. יש לאפשר 'filelocking.enabled' בקובץ config.php למניעת בעיות אלו. ניתן לראות מידע נוסף ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "משמעות הדבר היא כי ייתכן שיש בעיות עם תוים מסוימים בשמות קבצים.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : " אנו ממליצים בחום להתקין את החבילות הנדרשות במערכת שלך כדי לתמוך באחת מהגדרות השפה הבאות: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "אם המערכת שלך לא מותקנת על נתיב הבסיס של שם התחום ומשתמשת במערכת cron, עלולות להיות בעיות עם יצירת כתובות האינטרנט. למניעת בעיות אלו, יש לקבוע את האופציה \"overwrite.cli.url\" בקובץ ה- config.php לנתיב הבסיסי של ההתקנה שלך (הציעו: \"%s \")",
@@ -245,6 +244,7 @@ OC.L10N.register(
     "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php רשום בשירות webcron לקרוא ל- cron.php בכל 15 דקות באמצעות http.",
     "Use system's cron service to call the cron.php file every 15 minutes." : "ניתן להשתמש בשירות cron לקרוא לקובץ cron.php בכל 15 דקות.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "אפשר השלמה אוטומטית של שמות משתמש בתפריט שיתוף. אם תכונה זו מנוטרלת יש להכניס שם משתמש מלא.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "למעבר למסד נתונים אחר יש להשתמש בכלי שורת פקודה: 'occ db:convert-type', או לעיין ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד↗</a>.",
     "Cheers!" : "לחיים!",
     "For password recovery and notifications" : "לשחזור סיסמא והודעות",
     "Get the apps to sync your files" : "קבלת היישומים לסנכרון הקבצים שלך",
diff --git a/settings/l10n/he.json b/settings/l10n/he.json
index ef0484aa047..f2e94c5606b 100644
--- a/settings/l10n/he.json
+++ b/settings/l10n/he.json
@@ -137,7 +137,6 @@
     "Security & setup warnings" : "הזהרות אבטחה והתקנה",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "תצורת קריאה בלבד הופעלה. תצורה זו מונעת קביעת מספר הגדרות באמצעות ממשק האינטרנט. יתר על כן, יש צורך להגדיר ההרשאות כתיבה באופן ידני לכל עדכון.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "זה ככל הנראה נגרם על ידי מאיץ/מטמון כמו Zend OPcache או eAccelerator.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "נעילת קבצים בפעולות מושבתת, זה עלול להוביל לבעיות גרסאות תזמון. יש לאפשר 'filelocking.enabled' בקובץ config.php למניעת בעיות אלו. ניתן לראות מידע נוסף ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "הגדרות שפה לא יכולות להקבע ככאלה שתומכות ב- UTF-8.",
     "All checks passed." : "כל הבדיקות עברו",
     "Execute one task with each page loaded" : "יש להפעיל משימה אחת עם כל עמוד שנטען",
@@ -157,7 +156,6 @@
     "Exclude groups from sharing" : "מניעת קבוצות משיתוף",
     "These groups will still be able to receive shares, but not to initiate them." : "קבוצות אלו עדיין יוכלו לקבל שיתופים, אך לא לשתף בעצמם.",
     "Tips & tricks" : "עצות ותחבולות",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "למעבר למסד נתונים אחר יש להשתמש בכלי שורת פקודה: 'occ db:convert-type', או לעיין ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד↗</a>.",
     "How to do backups" : "איך לבצע גיבויים",
     "Advanced monitoring" : "ניטור מתקדם",
     "Performance tuning" : "כוונון ביצועים",
@@ -232,6 +230,7 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP מוגדר ככל הנראה להפשיט בלוקי קוד. מצב זה יגרום למספר יישומי ליבה להיות לא נגישים.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s מתחת לגרסה %2$s מותקנת, מסיבות יציבות וביצועים אנו ממליצים לעדכן לגרסה חדשה יותר גרסה %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "מודול ה- PHP מסוג 'fileinfo' חסר. אנו ממליצים בחום לאפשר מודול זה כדי לקבל תוצאות מיטביות עם גילוי mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "נעילת קבצים בפעולות מושבתת, זה עלול להוביל לבעיות גרסאות תזמון. יש לאפשר 'filelocking.enabled' בקובץ config.php למניעת בעיות אלו. ניתן לראות מידע נוסף ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "משמעות הדבר היא כי ייתכן שיש בעיות עם תוים מסוימים בשמות קבצים.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : " אנו ממליצים בחום להתקין את החבילות הנדרשות במערכת שלך כדי לתמוך באחת מהגדרות השפה הבאות: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "אם המערכת שלך לא מותקנת על נתיב הבסיס של שם התחום ומשתמשת במערכת cron, עלולות להיות בעיות עם יצירת כתובות האינטרנט. למניעת בעיות אלו, יש לקבוע את האופציה \"overwrite.cli.url\" בקובץ ה- config.php לנתיב הבסיסי של ההתקנה שלך (הציעו: \"%s \")",
@@ -243,6 +242,7 @@
     "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php רשום בשירות webcron לקרוא ל- cron.php בכל 15 דקות באמצעות http.",
     "Use system's cron service to call the cron.php file every 15 minutes." : "ניתן להשתמש בשירות cron לקרוא לקובץ cron.php בכל 15 דקות.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "אפשר השלמה אוטומטית של שמות משתמש בתפריט שיתוף. אם תכונה זו מנוטרלת יש להכניס שם משתמש מלא.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "למעבר למסד נתונים אחר יש להשתמש בכלי שורת פקודה: 'occ db:convert-type', או לעיין ב- <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">תיעוד↗</a>.",
     "Cheers!" : "לחיים!",
     "For password recovery and notifications" : "לשחזור סיסמא והודעות",
     "Get the apps to sync your files" : "קבלת היישומים לסנכרון הקבצים שלך",
diff --git a/settings/l10n/hu.js b/settings/l10n/hu.js
index 4de006ef3dc..2873d64140a 100644
--- a/settings/l10n/hu.js
+++ b/settings/l10n/hu.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Biztonsági és telepítési figyelmeztetések",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "A telepítésed biztonságához és megfelelő teljesítményéhez fontos, hogy minden beállítás helyes legyen. Ennek érdekében segítünk pár automatikus ellenőrzéssel. Kérlek tekintsd meg a tippek&trükkök részt a dokumentációban több információért.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Úgy tűnik, hogy a PHP nem tudja olvasni a rendszer környezeti változóit. A getenv(\"PATH\") teszt visszatérési értéke üres.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Kérjük, ellenőrizze a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">telepítési dokumentációt ↗</a> a PHP konfigurációs beállításaival kapcsolatban, főleg ha PHP-FPM-et használ.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Csak olvasható beállítófájl engedélyezve. Ez meggátolja a beállítások módosítását a webes felületről. Továbbá, a fájlt kézzel kell írhatóvá tenni minden frissítés alkalmával.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Úgy tűnik, hogy a PHP úgy van beállítva, hogy eltávolítja programok belsejében elhelyezett szövegblokkokat. Emiatt a rendszer több alapvető fontosságú eleme működésképtelen lesz.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Ezt valószínűleg egy gyorsítótár ill. kódgyorsító, mint pl, a Zend, OPcache vagy eAccelererator okozza.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Az adatbázis nem tud \"READ COMMITTED\" tranzakció elkülönítési szinttel futni. Ez problémákat okozhat több egyidejű esemény végrehajtásakor.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s %2$s verziója van telepítve, de a stabilitási és teljesítményi okok miatt javasoljuk az újabb, %1$s verzióra való frissítést.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "A 'fileinfo' PHP modul nincs meg. Erősen javasoljuk használatát, hogy a MIME típus felismerés megfelelően működjön.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Tranzakcionális fájl lezárás tiltva van, ez problémákat okozhat versenyhelyzetben. Engedélyezd a  'filelocking.enabled' beállítást a config.php -ben, hogy elkerüld ezeket a problémákat. Nézd meg a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a> bővebb információért.",
     "System locale can not be set to a one which supports UTF-8." : "A rendszer lokalizációs fájljai között nem sikerült olyat beállítani, ami támogatja az UTF-8-at.",
     "This means that there might be problems with certain characters in filenames." : "Ez azt jelenti probléma lehet bizonyos karakterekkel a fájlnevekben.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Erősen javasolt a szükséges csomagok telepítése a rendszeredre a következőhöz: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ha a telepítése nem a webkiszolgáló gyökerében van, és a rendszer cron szolgáltatását használja, akkor problémák lehetnek az URL-ek képzésével. Ezek elkerülése érdekében állítsa be a config.php-ban az \"overwrite.cli.url\" paramétert a telepítés által használt webútvonalra. (Javasolt beállítás: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nem lehetett CLI módban futtatni a cron feladatot. A következő technikai hibák léptek fel:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Kérjük, ellenőrizd a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">telepítési dokumentációt ↗</a> és a <a href=\"%s\">naplót</a>, hogy tartalmaz-e bármilyen hibát vagy figyelmeztetést.",
     "All checks passed." : "Minden ellenőrzés sikeres.",
     "Background jobs" : "Háttérfeladatok",
     "Last job ran %s." : "Utolsó futás: %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Rengeteg szolgáltatás és kapcsoló van a telepítés személyreszabásához. Íme pár iránymutatás a további információkra.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Jelenleg SQLite van használva háttér adatbázisként. Nagyobb telepítéshez más háttér adatbázist javaslunk.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Ez különösen asztali kliens szinkronizáció használata esetén javasolt.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Más adatbázisról való áttéréshez használja a parancssort: 'occ db:convert-type', vagy keresse fel a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a>.",
     "How to do backups" : "Hogyan csináljunk biztonsági mentéseket",
     "Advanced monitoring" : "Haladó monitorozás",
     "Performance tuning" : "Teljesítmény hangolás",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Úgy tűnik, hogy a PHP úgy van beállítva, hogy eltávolítja programok belsejében elhelyezett szövegblokkokat. Emiatt a rendszer több alapvető fontosságú eleme működésképtelen lesz.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s %2$s verziója van telepítve, de a stabilitási és teljesítményi okok miatt javasoljuk az újabb, %1$s verzióra való frissítést.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "A 'fileinfo' PHP modul hiányzik. Erősen javasolt ennek a modulnak a telepítése, mert ezzel lényegesen jobb a MIME-típusok felismerése.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Tranzakcionális fájl lezárás tiltva van, ez problémákat okozhat versenyhelyzetben. Engedélyezd a  'filelocking.enabled' beállítást a config.php -ben, hogy elkerüld ezeket a problémákat. Nézd meg a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a> bővebb információért.",
     "This means that there might be problems with certain characters in file names." : "Ez azt jelenti, hogy probléma lehet bizonyos karakterekkel a fájlnevekben.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Feltétlenül javasoljuk, hogy telepítse a szükséges csomagokat ahhoz, hogy a rendszere támogassa a következő lokalizációk valamelyikét: %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ha a telepítése nem a webkiszolgáló gyökerében van, és a rendszer cron szolgáltatását használja, akkor problémák lehetnek az URL-ek képzésével. Ezek elkerülése érdekében állítsa be a config.php-ban az \"overwrite.cli.url\" paramétert a telepítés által használt webútvonalra. (Javasolt beállítás: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Az ütemezett feladat (cronjob) nem futott le parancssorból. A következő hibák tűntek fel:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Kérjük, ellenőrizd a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">telepítési dokumentációt ↗</a> és a <a href=\"%s\">naplót</a>, hogy tartalmaz-e bármilyen hibát vagy figyelmeztetést.",
     "Cron" : "Ütemezett feladatok",
     "Last cron job execution: %s." : "Az utolsó cron feladat ekkor futott le: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Az utolsó cron feladat ekkor futott le: %s. Valami nincs rendben.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "A rendszer cron szolgáltatását használjuk, mely a cron.php fájlt futtatja le 15 percenként.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Ennek a futtatásához szükség van a PHP posix kiterjesztésre. További információkért nézd meg a {linkstart}PHP dokumentációt{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Felhasználónév automatikus befejezése engedélyezése a megosztás ablakban. Ha le van tiltva, akkor a teljes felhasználónevet kell beírni.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Más adatbázisról való áttéréshez használja a parancssort: 'occ db:convert-type', vagy keresse fel a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a>.",
     "Uninstall app" : "Alkalmazás eltávolítása",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Szia!<br><br>Szeretnénk tudatni, hogy elkészült a fiókod: %s.<br><br>A felhasználóneved: <strong>%s</strong><br>Hozzáférés itt: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Üdv.",
diff --git a/settings/l10n/hu.json b/settings/l10n/hu.json
index 96842d85442..c76a9c6b325 100644
--- a/settings/l10n/hu.json
+++ b/settings/l10n/hu.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Biztonsági és telepítési figyelmeztetések",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "A telepítésed biztonságához és megfelelő teljesítményéhez fontos, hogy minden beállítás helyes legyen. Ennek érdekében segítünk pár automatikus ellenőrzéssel. Kérlek tekintsd meg a tippek&trükkök részt a dokumentációban több információért.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Úgy tűnik, hogy a PHP nem tudja olvasni a rendszer környezeti változóit. A getenv(\"PATH\") teszt visszatérési értéke üres.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Kérjük, ellenőrizze a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">telepítési dokumentációt ↗</a> a PHP konfigurációs beállításaival kapcsolatban, főleg ha PHP-FPM-et használ.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Csak olvasható beállítófájl engedélyezve. Ez meggátolja a beállítások módosítását a webes felületről. Továbbá, a fájlt kézzel kell írhatóvá tenni minden frissítés alkalmával.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Úgy tűnik, hogy a PHP úgy van beállítva, hogy eltávolítja programok belsejében elhelyezett szövegblokkokat. Emiatt a rendszer több alapvető fontosságú eleme működésképtelen lesz.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Ezt valószínűleg egy gyorsítótár ill. kódgyorsító, mint pl, a Zend, OPcache vagy eAccelererator okozza.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Az adatbázis nem tud \"READ COMMITTED\" tranzakció elkülönítési szinttel futni. Ez problémákat okozhat több egyidejű esemény végrehajtásakor.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s %2$s verziója van telepítve, de a stabilitási és teljesítményi okok miatt javasoljuk az újabb, %1$s verzióra való frissítést.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "A 'fileinfo' PHP modul nincs meg. Erősen javasoljuk használatát, hogy a MIME típus felismerés megfelelően működjön.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Tranzakcionális fájl lezárás tiltva van, ez problémákat okozhat versenyhelyzetben. Engedélyezd a  'filelocking.enabled' beállítást a config.php -ben, hogy elkerüld ezeket a problémákat. Nézd meg a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a> bővebb információért.",
     "System locale can not be set to a one which supports UTF-8." : "A rendszer lokalizációs fájljai között nem sikerült olyat beállítani, ami támogatja az UTF-8-at.",
     "This means that there might be problems with certain characters in filenames." : "Ez azt jelenti probléma lehet bizonyos karakterekkel a fájlnevekben.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Erősen javasolt a szükséges csomagok telepítése a rendszeredre a következőhöz: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ha a telepítése nem a webkiszolgáló gyökerében van, és a rendszer cron szolgáltatását használja, akkor problémák lehetnek az URL-ek képzésével. Ezek elkerülése érdekében állítsa be a config.php-ban az \"overwrite.cli.url\" paramétert a telepítés által használt webútvonalra. (Javasolt beállítás: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nem lehetett CLI módban futtatni a cron feladatot. A következő technikai hibák léptek fel:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Kérjük, ellenőrizd a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">telepítési dokumentációt ↗</a> és a <a href=\"%s\">naplót</a>, hogy tartalmaz-e bármilyen hibát vagy figyelmeztetést.",
     "All checks passed." : "Minden ellenőrzés sikeres.",
     "Background jobs" : "Háttérfeladatok",
     "Last job ran %s." : "Utolsó futás: %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Rengeteg szolgáltatás és kapcsoló van a telepítés személyreszabásához. Íme pár iránymutatás a további információkra.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Jelenleg SQLite van használva háttér adatbázisként. Nagyobb telepítéshez más háttér adatbázist javaslunk.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Ez különösen asztali kliens szinkronizáció használata esetén javasolt.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Más adatbázisról való áttéréshez használja a parancssort: 'occ db:convert-type', vagy keresse fel a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a>.",
     "How to do backups" : "Hogyan csináljunk biztonsági mentéseket",
     "Advanced monitoring" : "Haladó monitorozás",
     "Performance tuning" : "Teljesítmény hangolás",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Úgy tűnik, hogy a PHP úgy van beállítva, hogy eltávolítja programok belsejében elhelyezett szövegblokkokat. Emiatt a rendszer több alapvető fontosságú eleme működésképtelen lesz.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s %2$s verziója van telepítve, de a stabilitási és teljesítményi okok miatt javasoljuk az újabb, %1$s verzióra való frissítést.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "A 'fileinfo' PHP modul hiányzik. Erősen javasolt ennek a modulnak a telepítése, mert ezzel lényegesen jobb a MIME-típusok felismerése.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Tranzakcionális fájl lezárás tiltva van, ez problémákat okozhat versenyhelyzetben. Engedélyezd a  'filelocking.enabled' beállítást a config.php -ben, hogy elkerüld ezeket a problémákat. Nézd meg a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a> bővebb információért.",
     "This means that there might be problems with certain characters in file names." : "Ez azt jelenti, hogy probléma lehet bizonyos karakterekkel a fájlnevekben.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Feltétlenül javasoljuk, hogy telepítse a szükséges csomagokat ahhoz, hogy a rendszere támogassa a következő lokalizációk valamelyikét: %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ha a telepítése nem a webkiszolgáló gyökerében van, és a rendszer cron szolgáltatását használja, akkor problémák lehetnek az URL-ek képzésével. Ezek elkerülése érdekében állítsa be a config.php-ban az \"overwrite.cli.url\" paramétert a telepítés által használt webútvonalra. (Javasolt beállítás: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Az ütemezett feladat (cronjob) nem futott le parancssorból. A következő hibák tűntek fel:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Kérjük, ellenőrizd a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">telepítési dokumentációt ↗</a> és a <a href=\"%s\">naplót</a>, hogy tartalmaz-e bármilyen hibát vagy figyelmeztetést.",
     "Cron" : "Ütemezett feladatok",
     "Last cron job execution: %s." : "Az utolsó cron feladat ekkor futott le: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Az utolsó cron feladat ekkor futott le: %s. Valami nincs rendben.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "A rendszer cron szolgáltatását használjuk, mely a cron.php fájlt futtatja le 15 percenként.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Ennek a futtatásához szükség van a PHP posix kiterjesztésre. További információkért nézd meg a {linkstart}PHP dokumentációt{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Felhasználónév automatikus befejezése engedélyezése a megosztás ablakban. Ha le van tiltva, akkor a teljes felhasználónevet kell beírni.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Más adatbázisról való áttéréshez használja a parancssort: 'occ db:convert-type', vagy keresse fel a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentációt ↗</a>.",
     "Uninstall app" : "Alkalmazás eltávolítása",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Szia!<br><br>Szeretnénk tudatni, hogy elkészült a fiókod: %s.<br><br>A felhasználóneved: <strong>%s</strong><br>Hozzáférés itt: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Üdv.",
diff --git a/settings/l10n/id.js b/settings/l10n/id.js
index b9fc0ced4cf..362f447a0ce 100644
--- a/settings/l10n/id.js
+++ b/settings/l10n/id.js
@@ -178,7 +178,6 @@ OC.L10N.register(
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Konfig Hanya-Baca telah diaktifkan. Ini akan mencegah setelan beberapa konfigurasi melalui antarmuka-web. Selanjutnya, berkas perlu dibuat dapat-dibaca secara manual untuk setiap pembaruan.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Hal ini kemungkinan disebabkan oleh cache/akselerator seperti Zend OPcache atau eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Database Anda tidak dijalankan dengan isolasi transaksi level \"READ COMMITED\". Ini dapat menyebabkan masalah saat banyak tindakan dilakukan secara paralel.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Penguncian berkas transaksional nonaktif, ini dapat menyebabkan masalah dengan kondisi tertentu. Aktifkan 'filelocking.enabled' dalam config.php untuk menghindari masalah ini. Lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a> untuk informasi lebih lanjut.",
     "System locale can not be set to a one which supports UTF-8." : "Sistem lokal tidak dapat diatur untuk satu yang mendukung UTF-8.",
     "All checks passed." : "Semua pemeriksaan lulus.",
     "Execute one task with each page loaded" : "Jalankan tugas setiap kali halaman dimuat",
@@ -198,7 +197,6 @@ OC.L10N.register(
     "Exclude groups from sharing" : "Tidak termasuk grup untuk berbagi",
     "These groups will still be able to receive shares, but not to initiate them." : "Grup ini akan tetap dapat menerima berbagi, tatapi tidak dapat membagikan.",
     "Tips & tricks" : "Tips & trik",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Untuk migrasi ke database lain, gunakan alat command line: 'occ db:convert-type', atau lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a>.",
     "How to do backups" : "Bagaimana cara membuat cadangan",
     "Advanced monitoring" : "Pemantauan tingkat lanjut",
     "Performance tuning" : "Pemeliharaan performa",
@@ -284,6 +282,7 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP tampaknya disetel menjadi strip inline doc blocks. Hal ini akan membuat beberapa aplikasi inti tidak dapat diakses.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s dibawah versi %2$s, untuk performa dan stabilitas kami merekomendasikan Anda memperbarui versi %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Module 'fileinfo' pada PHP tidak ada. Kami sangat menyarankan untuk mengaktifkan modul ini untuk mendapatkan hasil terbaik pada proses pendeteksian mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Penguncian berkas transaksional nonaktif, ini dapat menyebabkan masalah dengan kondisi tertentu. Aktifkan 'filelocking.enabled' dalam config.php untuk menghindari masalah ini. Lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a> untuk informasi lebih lanjut.",
     "This means that there might be problems with certain characters in file names." : "Ini artinya mungkin ada masalah dengan karakter tertentu pada nama berkas.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Kamu sangat menyarankan untuk menginstal paket-paket yang dibutuhkan pada sistem agar mendukung lokal berikut: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Jika instalasi Anda tidak di root domain dan menggunakan sistem cron, hal tersebut dapat menyebabkan masalah dengan pembuatan URL. Untuk mencegah masalah tersebut, mohon atur opsi \"overwrite.cli.url\" pada berkas config.php Anda ke jalur lokasi webroot instalasi Anda (Disarankan: \"%s\")",
@@ -295,6 +294,7 @@ OC.L10N.register(
     "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php didaftarkan pada layanan webcron untuk memanggil cron.php setiap 15 menit melalui http.",
     "Use system's cron service to call the cron.php file every 15 minutes." : "Gunakan layanan cron sistem untuk memanggil berkas cron.php setiap 15 menit.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Izinkan penyelesai otomatis pada nama pengguna di jendela dialog berbagi. Jika ini dinonaktifkan, nama pengguna utuh perlu dimasukkan.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Untuk migrasi ke database lain, gunakan alat command line: 'occ db:convert-type', atau lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a>.",
     "Cheers!" : "Horee!",
     "For password recovery and notifications" : "Untuk pemulihan sandi dan pemberitahuan",
     "Get the apps to sync your files" : "Dapatkan aplikasi untuk sinkronisasi berkas Anda",
diff --git a/settings/l10n/id.json b/settings/l10n/id.json
index 2386a0de616..b24a38a614e 100644
--- a/settings/l10n/id.json
+++ b/settings/l10n/id.json
@@ -176,7 +176,6 @@
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Konfig Hanya-Baca telah diaktifkan. Ini akan mencegah setelan beberapa konfigurasi melalui antarmuka-web. Selanjutnya, berkas perlu dibuat dapat-dibaca secara manual untuk setiap pembaruan.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Hal ini kemungkinan disebabkan oleh cache/akselerator seperti Zend OPcache atau eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Database Anda tidak dijalankan dengan isolasi transaksi level \"READ COMMITED\". Ini dapat menyebabkan masalah saat banyak tindakan dilakukan secara paralel.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Penguncian berkas transaksional nonaktif, ini dapat menyebabkan masalah dengan kondisi tertentu. Aktifkan 'filelocking.enabled' dalam config.php untuk menghindari masalah ini. Lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a> untuk informasi lebih lanjut.",
     "System locale can not be set to a one which supports UTF-8." : "Sistem lokal tidak dapat diatur untuk satu yang mendukung UTF-8.",
     "All checks passed." : "Semua pemeriksaan lulus.",
     "Execute one task with each page loaded" : "Jalankan tugas setiap kali halaman dimuat",
@@ -196,7 +195,6 @@
     "Exclude groups from sharing" : "Tidak termasuk grup untuk berbagi",
     "These groups will still be able to receive shares, but not to initiate them." : "Grup ini akan tetap dapat menerima berbagi, tatapi tidak dapat membagikan.",
     "Tips & tricks" : "Tips & trik",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Untuk migrasi ke database lain, gunakan alat command line: 'occ db:convert-type', atau lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a>.",
     "How to do backups" : "Bagaimana cara membuat cadangan",
     "Advanced monitoring" : "Pemantauan tingkat lanjut",
     "Performance tuning" : "Pemeliharaan performa",
@@ -282,6 +280,7 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP tampaknya disetel menjadi strip inline doc blocks. Hal ini akan membuat beberapa aplikasi inti tidak dapat diakses.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s dibawah versi %2$s, untuk performa dan stabilitas kami merekomendasikan Anda memperbarui versi %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Module 'fileinfo' pada PHP tidak ada. Kami sangat menyarankan untuk mengaktifkan modul ini untuk mendapatkan hasil terbaik pada proses pendeteksian mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Penguncian berkas transaksional nonaktif, ini dapat menyebabkan masalah dengan kondisi tertentu. Aktifkan 'filelocking.enabled' dalam config.php untuk menghindari masalah ini. Lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a> untuk informasi lebih lanjut.",
     "This means that there might be problems with certain characters in file names." : "Ini artinya mungkin ada masalah dengan karakter tertentu pada nama berkas.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Kamu sangat menyarankan untuk menginstal paket-paket yang dibutuhkan pada sistem agar mendukung lokal berikut: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Jika instalasi Anda tidak di root domain dan menggunakan sistem cron, hal tersebut dapat menyebabkan masalah dengan pembuatan URL. Untuk mencegah masalah tersebut, mohon atur opsi \"overwrite.cli.url\" pada berkas config.php Anda ke jalur lokasi webroot instalasi Anda (Disarankan: \"%s\")",
@@ -293,6 +292,7 @@
     "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php didaftarkan pada layanan webcron untuk memanggil cron.php setiap 15 menit melalui http.",
     "Use system's cron service to call the cron.php file every 15 minutes." : "Gunakan layanan cron sistem untuk memanggil berkas cron.php setiap 15 menit.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Izinkan penyelesai otomatis pada nama pengguna di jendela dialog berbagi. Jika ini dinonaktifkan, nama pengguna utuh perlu dimasukkan.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Untuk migrasi ke database lain, gunakan alat command line: 'occ db:convert-type', atau lihat <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasi ↗</a>.",
     "Cheers!" : "Horee!",
     "For password recovery and notifications" : "Untuk pemulihan sandi dan pemberitahuan",
     "Get the apps to sync your files" : "Dapatkan aplikasi untuk sinkronisasi berkas Anda",
diff --git a/settings/l10n/is.js b/settings/l10n/is.js
index 910341cce17..af53d09be81 100644
--- a/settings/l10n/is.js
+++ b/settings/l10n/is.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Öryggi og aðvaranir vegna uppsetningar",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Það er mikilvægt fyrir öryggi og afköst uppsetningarinnar þinnar að allt sé rétt stillt. Til að hjálpa við að svo sé, eru gerðar ýmsar sjálfvirkar prófanir. Skoðaðu 'Ábendingar og góð ráð' (Tips & Tricks) og hjálparskjölin til að sjá ítarlegar upplýsingar.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Það lítur út eins og að PHP sé ekki rétt sett upp varðandi fyrirspurnir um umhverfisbreytur. Prófun með getenv(\"PATH\") skilar auðu svari.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Endilega skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjöl uppsetningarinnar ↗</a> varðandi athugasemdir vegna uppsetningar PHP og sjálfa uppsetningu PHP-þjónsins, Sérstaklega ef þú notar php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Skrifvarða stillingaskráin hefur verið virkjuð. Þetta kemur í veg fyrir að hægt sé að sýsla með sumar stillingar í gegnum vefviðmótið. Að auki þarf þessi skrá að vera skrifanleg við hverja uppfærslu.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP virðist vera sett upp to fjarlægja innantextablokkir (inline doc blocks). Þetta mun gera ýmis kjarnaforrit óaðgengileg.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Þessu veldur væntanlega biðminni/hraðall á borð við Zend OPcache eða eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Gagnagrunnurinn keyrir ekki með \"READ COMMITTED\" færsluaðgreiningarstiginu. Þetta getur valdið vandamálum þegar margar aðgerðir eru keyrðar í einu.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s eldra en útgáfa %2$s er uppsett, en vegna stöðugleika og afkasta mælum við með að útgáfa %1$s verði sett upp.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-eininguna 'fileinfo' vantar. Við mælum eindregið með notkun þessarar einingar til að fá bestu útkomu við greiningu á MIME-skráagerðum.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Færslulæsing skráa (transactional file locking) er óvirk, þetta gæti leitt til vandamála út frá forgangsskilyrðum (race conditions). Virkjaðu 'filelocking.enabled' í config.php til að forðast slík vandamál. Skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a> til að sjá nánari upplýsingar.",
     "System locale can not be set to a one which supports UTF-8." : "Ekki var hægt að setja staðfærslu kerfisins á neina sem styður UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Þetta þýðir að það geta komið upp vandamál við að birta ákveðna stafi í skráaheitum.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Við mælum eindregið með því að þessir nauðsynlegu pakkar séu á kerfinu til stuðnings einnar af eftirfarandi staðfærslum: %s",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ef uppsetningin þín er ekki á rót lénsins og þú notar cron stýrikerfisins, þá geta komið upp vandamál við gerð URL-slóða. Til að forðast slík vandamál, skaltu stilla \"overwrite.cli.url\" valkostinn í config.php skránni þinni á slóð vefrótarinnar (webroot) í uppsetningunni (tillaga: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Ekki var hægt að keyra cron-verkið á skipanalínu. Eftirfarandi tæknilegar villur komu upp:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Yfirfarðu vandlega <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">uppsetningarleiðbeiningarnar ↗</a>, og athugaðu hvort nokkrar villumeldingar eða aðvaranir séu í <a href=\"%s\">annálnum</a>.",
     "All checks passed." : "Stóðst allar prófanir.",
     "Background jobs" : "Verk í bakgrunni",
     "Last job ran %s." : "Síðasta verk var keyrt %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Það eru margir eiginleikar og stillingarofar í boði til að sérsníða og besta notkun þessarar uppsetningar. Hér eru nokkrar ábendingar um frekari upplýsingar.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Núna er stuðst við SQLite sem bakenda fyrir gagnagrunn. Fyrir stærri uppsetningar mælum við með að skipta yfir í annan gagnagrunnsbakenda.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Mælt er sérstaklega með þessu þegar skjáborðsforritið er notað til að samstilla skrár.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Til að yfirfæra í annan gagnagrunn skaltu nota skipanalínutólið: 'occ db:convert-type', eða lesa <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a>.",
     "How to do backups" : "Hvernig á að taka öryggisafrit",
     "Advanced monitoring" : "Ítarleg vöktun",
     "Performance tuning" : "Fínstilling afkasta",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP virðist vera sett upp to fjarlægja innantextablokkir (inline doc blocks). Þetta mun gera ýmis kjarnaforrit óaðgengileg.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s eldra en útgáfa %2$s er uppsett, en vegna stöðugleika og afkasta mælum við með að útgáfa %1$s verði sett upp.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP-eininguna 'fileinfo' vantar. Við mælum eindregið með notkun þessarar einingar til að fá bestu útkomu við greiningu á MIME-skráagerðum.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Færslulæsing skráa (transactional file locking) er óvirk, þetta gæti leitt til vandamála út frá forgangsskilyrðum (race conditions). Virkjaðu 'filelocking.enabled' í config.php til að forðast slík vandamál. Skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a> til að sjá nánari upplýsingar.",
     "This means that there might be problems with certain characters in file names." : "Þetta þýðir að það geta komið upp vandamál við að birta ákveðna stafi í skráaheitum.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Við mælum eindregið með því að þessir nauðsynlegu pakkar séu á kerfinu til stuðnings einnar af eftirfarandi staðfærslum: %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ef uppsetningin þín er ekki á rót lénsins og þú notar cron stýrikerfisins, þá geta komið upp vandamál við gerð URL-slóða. Til að forðast slík vandamál, skaltu stilla \"overwrite.cli.url\" valkostinn í config.php skránni þinni á slóð vefrótarinnar (webroot) í uppsetningunni (tillaga: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Ekki var hægt að keyra cron-verkið á skipanalínu. Eftirfarandi tæknilegar villur komu upp:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Yfirfarðu vandlega <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">uppsetningarleiðbeiningarnar ↗</a>, og athugaðu hvort nokkrar villumeldingar eða aðvaranir séu í <a href=\"%s\">annálnum</a>.",
     "Cron" : "CRON",
     "Last cron job execution: %s." : "Síðasta keyrsla cron-verks: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Síðasta keyrsla cron-verks: %s. Eitthvað er ekki eins og það á að sér að vera.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Nota cron-þjónustu kerfisins til að kalla á cron.php skrána á 15 mínútna fresti.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Til að keyra þetta þarftu að hafa PHP-posix-viðaukann (extension). Skoðaðu {linkstart}PHP-hjálparskjölin{linkend} fyrir nánari útlistun.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Leyfa sjálfklárun notandanafns í deilingarglugga. Ef þetta er óvirkt þarf að setja inn fullt nafn notanda.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Til að yfirfæra í annan gagnagrunn skaltu nota skipanalínutólið: 'occ db:convert-type', eða lesa <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a>.",
     "Uninstall app" : "Henda út forriti",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hæ þú,<br><br>bara að láta þig vita að þú átt núna s aðgang.<br><br>Notandanafnið þitt: <strong>%s</strong><br>Tengstu honum: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Til hamingju!",
diff --git a/settings/l10n/is.json b/settings/l10n/is.json
index c2fb3310013..f3ebcf496ab 100644
--- a/settings/l10n/is.json
+++ b/settings/l10n/is.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Öryggi og aðvaranir vegna uppsetningar",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Það er mikilvægt fyrir öryggi og afköst uppsetningarinnar þinnar að allt sé rétt stillt. Til að hjálpa við að svo sé, eru gerðar ýmsar sjálfvirkar prófanir. Skoðaðu 'Ábendingar og góð ráð' (Tips & Tricks) og hjálparskjölin til að sjá ítarlegar upplýsingar.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "Það lítur út eins og að PHP sé ekki rétt sett upp varðandi fyrirspurnir um umhverfisbreytur. Prófun með getenv(\"PATH\") skilar auðu svari.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Endilega skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjöl uppsetningarinnar ↗</a> varðandi athugasemdir vegna uppsetningar PHP og sjálfa uppsetningu PHP-þjónsins, Sérstaklega ef þú notar php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Skrifvarða stillingaskráin hefur verið virkjuð. Þetta kemur í veg fyrir að hægt sé að sýsla með sumar stillingar í gegnum vefviðmótið. Að auki þarf þessi skrá að vera skrifanleg við hverja uppfærslu.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP virðist vera sett upp to fjarlægja innantextablokkir (inline doc blocks). Þetta mun gera ýmis kjarnaforrit óaðgengileg.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Þessu veldur væntanlega biðminni/hraðall á borð við Zend OPcache eða eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Gagnagrunnurinn keyrir ekki með \"READ COMMITTED\" færsluaðgreiningarstiginu. Þetta getur valdið vandamálum þegar margar aðgerðir eru keyrðar í einu.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s eldra en útgáfa %2$s er uppsett, en vegna stöðugleika og afkasta mælum við með að útgáfa %1$s verði sett upp.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-eininguna 'fileinfo' vantar. Við mælum eindregið með notkun þessarar einingar til að fá bestu útkomu við greiningu á MIME-skráagerðum.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Færslulæsing skráa (transactional file locking) er óvirk, þetta gæti leitt til vandamála út frá forgangsskilyrðum (race conditions). Virkjaðu 'filelocking.enabled' í config.php til að forðast slík vandamál. Skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a> til að sjá nánari upplýsingar.",
     "System locale can not be set to a one which supports UTF-8." : "Ekki var hægt að setja staðfærslu kerfisins á neina sem styður UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Þetta þýðir að það geta komið upp vandamál við að birta ákveðna stafi í skráaheitum.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Við mælum eindregið með því að þessir nauðsynlegu pakkar séu á kerfinu til stuðnings einnar af eftirfarandi staðfærslum: %s",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ef uppsetningin þín er ekki á rót lénsins og þú notar cron stýrikerfisins, þá geta komið upp vandamál við gerð URL-slóða. Til að forðast slík vandamál, skaltu stilla \"overwrite.cli.url\" valkostinn í config.php skránni þinni á slóð vefrótarinnar (webroot) í uppsetningunni (tillaga: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Ekki var hægt að keyra cron-verkið á skipanalínu. Eftirfarandi tæknilegar villur komu upp:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Yfirfarðu vandlega <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">uppsetningarleiðbeiningarnar ↗</a>, og athugaðu hvort nokkrar villumeldingar eða aðvaranir séu í <a href=\"%s\">annálnum</a>.",
     "All checks passed." : "Stóðst allar prófanir.",
     "Background jobs" : "Verk í bakgrunni",
     "Last job ran %s." : "Síðasta verk var keyrt %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Það eru margir eiginleikar og stillingarofar í boði til að sérsníða og besta notkun þessarar uppsetningar. Hér eru nokkrar ábendingar um frekari upplýsingar.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Núna er stuðst við SQLite sem bakenda fyrir gagnagrunn. Fyrir stærri uppsetningar mælum við með að skipta yfir í annan gagnagrunnsbakenda.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Mælt er sérstaklega með þessu þegar skjáborðsforritið er notað til að samstilla skrár.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Til að yfirfæra í annan gagnagrunn skaltu nota skipanalínutólið: 'occ db:convert-type', eða lesa <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a>.",
     "How to do backups" : "Hvernig á að taka öryggisafrit",
     "Advanced monitoring" : "Ítarleg vöktun",
     "Performance tuning" : "Fínstilling afkasta",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP virðist vera sett upp to fjarlægja innantextablokkir (inline doc blocks). Þetta mun gera ýmis kjarnaforrit óaðgengileg.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s eldra en útgáfa %2$s er uppsett, en vegna stöðugleika og afkasta mælum við með að útgáfa %1$s verði sett upp.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP-eininguna 'fileinfo' vantar. Við mælum eindregið með notkun þessarar einingar til að fá bestu útkomu við greiningu á MIME-skráagerðum.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Færslulæsing skráa (transactional file locking) er óvirk, þetta gæti leitt til vandamála út frá forgangsskilyrðum (race conditions). Virkjaðu 'filelocking.enabled' í config.php til að forðast slík vandamál. Skoðaðu <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a> til að sjá nánari upplýsingar.",
     "This means that there might be problems with certain characters in file names." : "Þetta þýðir að það geta komið upp vandamál við að birta ákveðna stafi í skráaheitum.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Við mælum eindregið með því að þessir nauðsynlegu pakkar séu á kerfinu til stuðnings einnar af eftirfarandi staðfærslum: %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ef uppsetningin þín er ekki á rót lénsins og þú notar cron stýrikerfisins, þá geta komið upp vandamál við gerð URL-slóða. Til að forðast slík vandamál, skaltu stilla \"overwrite.cli.url\" valkostinn í config.php skránni þinni á slóð vefrótarinnar (webroot) í uppsetningunni (tillaga: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Ekki var hægt að keyra cron-verkið á skipanalínu. Eftirfarandi tæknilegar villur komu upp:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Yfirfarðu vandlega <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">uppsetningarleiðbeiningarnar ↗</a>, og athugaðu hvort nokkrar villumeldingar eða aðvaranir séu í <a href=\"%s\">annálnum</a>.",
     "Cron" : "CRON",
     "Last cron job execution: %s." : "Síðasta keyrsla cron-verks: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Síðasta keyrsla cron-verks: %s. Eitthvað er ekki eins og það á að sér að vera.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Nota cron-þjónustu kerfisins til að kalla á cron.php skrána á 15 mínútna fresti.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Til að keyra þetta þarftu að hafa PHP-posix-viðaukann (extension). Skoðaðu {linkstart}PHP-hjálparskjölin{linkend} fyrir nánari útlistun.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Leyfa sjálfklárun notandanafns í deilingarglugga. Ef þetta er óvirkt þarf að setja inn fullt nafn notanda.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Til að yfirfæra í annan gagnagrunn skaltu nota skipanalínutólið: 'occ db:convert-type', eða lesa <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">hjálparskjölin ↗</a>.",
     "Uninstall app" : "Henda út forriti",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hæ þú,<br><br>bara að láta þig vita að þú átt núna s aðgang.<br><br>Notandanafnið þitt: <strong>%s</strong><br>Tengstu honum: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Til hamingju!",
diff --git a/settings/l10n/it.js b/settings/l10n/it.js
index 707e3046d9b..53a0d29e2b8 100644
--- a/settings/l10n/it.js
+++ b/settings/l10n/it.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Avvisi di sicurezza e di configurazione",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "È importante per la sicurezza e le prestazioni della tua istanza che tutto sia configurato correttamente. Per aiutarti in questo senso, stiamo eseguendo qualche controllo automatico. Vedi la sezione Suggerimenti e trucchi e la documentazione per ulteriori informazioni.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP non sembra essere configurato correttamente per interrogare le variabili d'ambiente di sistema. Il test con getenv(\"PATH\") restituisce solo una risposta vuota.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Controlla la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione di installazione ↗</a>  per le note di configurazione di PHP e la configurazione PHP del tuo server, in particolare quando utilizzi php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configurazione di sola lettura è stata abilitata. Ciò impedisce l'impostazione di alcune configurazioni tramite l'interfaccia web. Inoltre, i file devono essere resi scrivibili manualmente per ogni aggiornamento.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Sembra che PHP sia configurato per rimuovere i blocchi di documentazione in linea. Ciò renderà inaccessibili diverse applicazioni principali.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Ciò è causato probabilmente da una cache/acceleratore come Zend OPcache o eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Il tuo database non è in esecuzione con il livello di isolamento delle transazioni \"READ COMMITTED\". Ciò può causare problemi quando diverse azioni sono eseguite in parallelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "La versione di %1$s installata è anteriore alla %2$s, per motivi di stabilità e prestazioni, consigliamo di aggiornare a una versione di %1$s più recente.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Il modulo PHP 'fileinfo' non è presente. Consigliamo vivamente di abilitare questo modulo per ottenere risultati migliori con il rilevamento dei tipi MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Il blocco del file transazionale è disabilitato, ciò potrebbe comportare problemi di race condition. Abilita 'filelocking.enabled' nel config-php per evitare questi problemi. Vedi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a> per ulteriori informazioni.",
     "System locale can not be set to a one which supports UTF-8." : "La localizzazione di sistema non può essere impostata a una che supporta UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Ciò vuol dire che ci potrebbero esserci problemi con certi caratteri nei nomi dei file.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "È vivamente consigliata l'installazione dei pacchetti richiesti sul tuo sistema per supportare una delle seguenti localizzazioni: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se la tua installazione non si trova nella radice del dominio e utilizza il cron di sistema, potrebbero esserci problemi con la generazione degli URL. Per evitare questi problemi, imposta l'opzione \"overwrite.cli.url\"  nel file config.php al percorso della radice del sito della tua installazione (Consigliato: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Non è stato possibile eseguire il job di cron tramite CLI. Sono apparsi i seguenti errori tecnici:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Leggi attentamente le  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guide d'installazione ↗</a>, e controlla gli errori o gli avvisi nel <a href=\"%s\">log</a>.",
     "All checks passed." : "Tutti i controlli passati.",
     "Background jobs" : "Operazioni in background",
     "Last job ran %s." : "Ultima esecuzione di cron: %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Sono disponibili molte funzionalità e parametri di configurazione per personalizzare e utilizzare in modo ottimale questa istanza. Qui troverai alcuni riferimenti per ulteriori informazioni.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite è utilizzato attualmente come database. Per installazioni più grandi consigliamo di passare a un motore di database diverso.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Consigliato particolarmente quando si utilizza il client desktop per la sincronizzazione dei file.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Per migrare a un altro database, usa lo strumento da riga di comando: 'occ db:convert-type', o leggi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a>.",
     "How to do backups" : "Come creare delle copie di sicurezza",
     "Advanced monitoring" : "Monitoraggio avanzato",
     "Performance tuning" : "Ottimizzazione delle prestazioni",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Sembra che PHP sia configurato per rimuovere i blocchi di documentazione in linea. Ciò renderà inaccessibili diverse applicazioni principali.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "La versione di %1$s installata è anteriore alla %2$s, per motivi di stabilità e prestazioni, consigliamo di aggiornare a una versione di %1$s più recente.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Il modulo PHP 'fileinfo' non è presente. Consigliamo vivamente di abilitare questo modulo per ottenere risultati migliori con il rilevamento dei tipi MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Il blocco del file transazionale è disabilitato, ciò potrebbe comportare problemi di race condition. Abilita 'filelocking.enabled' nel config-php per evitare questi problemi. Vedi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a> per ulteriori informazioni.",
     "This means that there might be problems with certain characters in file names." : "Ciò significa che potrebbero esserci problemi con alcuni caratteri nei nomi dei file.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Consigliamo vivamente di installare i pacchetti richiesti sul tuo sistema per supportare una delle localizzazioni seguenti: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se la tua installazione non si trova nella radice del dominio e utilizza il cron di sistema, potrebbero esserci problemi con la generazione degli URL. Per evitare questi problemi, imposta l'opzione \"overwrite.cli.url\"  nel file config.php al percorso della radice del sito della tua installazione (Consigliato: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Non è stato possibile eseguire il job di cron tramite CLI. Sono apparsi i seguenti errori tecnici:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Leggi attentamente le  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guide d'installazione ↗</a>, e controlla gli errori o gli avvisi nel <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Ultima esecuzione di cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Ultima esecuzione di cron: %s. Potrebbe esserci un problema.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usa il servizio cron di sistema per invocare il file cron.php ogni 15 minuti.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Per eseguirlo, hai bisogno dell'estensione posix di PHP. Vedi la {linkstart}documentazione di PHP{linkend} per ulteriori dettagli.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Consenti il completamento del nome utente nella finestra di condivisione. Se è disabilitata, è necessario digitare il nome utente completo.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Per migrare a un altro database, usa lo strumento da riga di comando: 'occ db:convert-type', o leggi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a>.",
     "Uninstall app" : "Disinstalla applicazione",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Ciao,<br><br>volevamo informarti che ora hai un account %s.<br><br>Il tuo nome utente: <strong>%s</strong><br>Accedi: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Saluti!",
diff --git a/settings/l10n/it.json b/settings/l10n/it.json
index 22fb5d72e9d..dabf0d47bd3 100644
--- a/settings/l10n/it.json
+++ b/settings/l10n/it.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Avvisi di sicurezza e di configurazione",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "È importante per la sicurezza e le prestazioni della tua istanza che tutto sia configurato correttamente. Per aiutarti in questo senso, stiamo eseguendo qualche controllo automatico. Vedi la sezione Suggerimenti e trucchi e la documentazione per ulteriori informazioni.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP non sembra essere configurato correttamente per interrogare le variabili d'ambiente di sistema. Il test con getenv(\"PATH\") restituisce solo una risposta vuota.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Controlla la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione di installazione ↗</a>  per le note di configurazione di PHP e la configurazione PHP del tuo server, in particolare quando utilizzi php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "La configurazione di sola lettura è stata abilitata. Ciò impedisce l'impostazione di alcune configurazioni tramite l'interfaccia web. Inoltre, i file devono essere resi scrivibili manualmente per ogni aggiornamento.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Sembra che PHP sia configurato per rimuovere i blocchi di documentazione in linea. Ciò renderà inaccessibili diverse applicazioni principali.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Ciò è causato probabilmente da una cache/acceleratore come Zend OPcache o eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Il tuo database non è in esecuzione con il livello di isolamento delle transazioni \"READ COMMITTED\". Ciò può causare problemi quando diverse azioni sono eseguite in parallelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "La versione di %1$s installata è anteriore alla %2$s, per motivi di stabilità e prestazioni, consigliamo di aggiornare a una versione di %1$s più recente.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Il modulo PHP 'fileinfo' non è presente. Consigliamo vivamente di abilitare questo modulo per ottenere risultati migliori con il rilevamento dei tipi MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Il blocco del file transazionale è disabilitato, ciò potrebbe comportare problemi di race condition. Abilita 'filelocking.enabled' nel config-php per evitare questi problemi. Vedi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a> per ulteriori informazioni.",
     "System locale can not be set to a one which supports UTF-8." : "La localizzazione di sistema non può essere impostata a una che supporta UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Ciò vuol dire che ci potrebbero esserci problemi con certi caratteri nei nomi dei file.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "È vivamente consigliata l'installazione dei pacchetti richiesti sul tuo sistema per supportare una delle seguenti localizzazioni: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se la tua installazione non si trova nella radice del dominio e utilizza il cron di sistema, potrebbero esserci problemi con la generazione degli URL. Per evitare questi problemi, imposta l'opzione \"overwrite.cli.url\"  nel file config.php al percorso della radice del sito della tua installazione (Consigliato: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Non è stato possibile eseguire il job di cron tramite CLI. Sono apparsi i seguenti errori tecnici:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Leggi attentamente le  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guide d'installazione ↗</a>, e controlla gli errori o gli avvisi nel <a href=\"%s\">log</a>.",
     "All checks passed." : "Tutti i controlli passati.",
     "Background jobs" : "Operazioni in background",
     "Last job ran %s." : "Ultima esecuzione di cron: %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Sono disponibili molte funzionalità e parametri di configurazione per personalizzare e utilizzare in modo ottimale questa istanza. Qui troverai alcuni riferimenti per ulteriori informazioni.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite è utilizzato attualmente come database. Per installazioni più grandi consigliamo di passare a un motore di database diverso.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Consigliato particolarmente quando si utilizza il client desktop per la sincronizzazione dei file.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Per migrare a un altro database, usa lo strumento da riga di comando: 'occ db:convert-type', o leggi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a>.",
     "How to do backups" : "Come creare delle copie di sicurezza",
     "Advanced monitoring" : "Monitoraggio avanzato",
     "Performance tuning" : "Ottimizzazione delle prestazioni",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Sembra che PHP sia configurato per rimuovere i blocchi di documentazione in linea. Ciò renderà inaccessibili diverse applicazioni principali.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "La versione di %1$s installata è anteriore alla %2$s, per motivi di stabilità e prestazioni, consigliamo di aggiornare a una versione di %1$s più recente.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Il modulo PHP 'fileinfo' non è presente. Consigliamo vivamente di abilitare questo modulo per ottenere risultati migliori con il rilevamento dei tipi MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Il blocco del file transazionale è disabilitato, ciò potrebbe comportare problemi di race condition. Abilita 'filelocking.enabled' nel config-php per evitare questi problemi. Vedi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a> per ulteriori informazioni.",
     "This means that there might be problems with certain characters in file names." : "Ciò significa che potrebbero esserci problemi con alcuni caratteri nei nomi dei file.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Consigliamo vivamente di installare i pacchetti richiesti sul tuo sistema per supportare una delle localizzazioni seguenti: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se la tua installazione non si trova nella radice del dominio e utilizza il cron di sistema, potrebbero esserci problemi con la generazione degli URL. Per evitare questi problemi, imposta l'opzione \"overwrite.cli.url\"  nel file config.php al percorso della radice del sito della tua installazione (Consigliato: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Non è stato possibile eseguire il job di cron tramite CLI. Sono apparsi i seguenti errori tecnici:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Leggi attentamente le  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guide d'installazione ↗</a>, e controlla gli errori o gli avvisi nel <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Ultima esecuzione di cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Ultima esecuzione di cron: %s. Potrebbe esserci un problema.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usa il servizio cron di sistema per invocare il file cron.php ogni 15 minuti.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Per eseguirlo, hai bisogno dell'estensione posix di PHP. Vedi la {linkstart}documentazione di PHP{linkend} per ulteriori dettagli.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Consenti il completamento del nome utente nella finestra di condivisione. Se è disabilitata, è necessario digitare il nome utente completo.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Per migrare a un altro database, usa lo strumento da riga di comando: 'occ db:convert-type', o leggi la <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentazione ↗</a>.",
     "Uninstall app" : "Disinstalla applicazione",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Ciao,<br><br>volevamo informarti che ora hai un account %s.<br><br>Il tuo nome utente: <strong>%s</strong><br>Accedi: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Saluti!",
diff --git a/settings/l10n/ja.js b/settings/l10n/ja.js
index 061700bd27d..5a4d416a2e4 100644
--- a/settings/l10n/ja.js
+++ b/settings/l10n/ja.js
@@ -245,20 +245,17 @@ OC.L10N.register(
     "Start migration" : "移行を開始",
     "Security & setup warnings" : "セキュリティ＆セットアップ警告",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHPのシステム環境変数が正しく設定されていないようです。getenv(\"PATH\") コマンドでテストして何も値を返さないことを確認してください。",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "PHP設定の注意事項と php-fpmを利用する場合のサーバー向け設定を <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> インストールドキュメント ↗</a> で確認してください。",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "\"config\"は読み取り専用になってます。そのためにWEBインターフェースで設定できません可能性があります。さらに、更新時に\"config\"ファイルを書き込み権限を与えることが必要",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHPでインラインドキュメントブロックを取り除く設定になっています。これによりコアアプリで利用できないものがいくつかあります。",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "これは、Zend OPcacheやeAccelerator 等のキャッシュ/アクセラレーターが原因かもしれません。",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "あなたのデータベースは \"READ COMMITED\" トランザクション分離レベルで動作していません。このことにより複数のアクションが平行して実行される場合に問題が起こる可能性があります。",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%2$s よりも古いバージョンの %1$s がインストールされています。安定した稼働とパフォーマンスの観点から、新しいバージョンの %1$s にアップデートすることをお勧めします。",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP のモジュール 'fileinfo' が見つかりません。mimeタイプの検出を精度良く行うために、このモジュールを有効にすることを強くお勧めします。",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "ファイルの書き込み時のロックが無効になっており、競合時に問題となる可能性があります。この問題を避ける為に config.php 中の 'filelocking.enabled' を有効にしてください。詳細については、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">ドキュメント↗ </a>を参照してください。",
     "System locale can not be set to a one which supports UTF-8." : "システムロケールを UTF-8 をサポートするロケールに設定できません。",
     "This means that there might be problems with certain characters in filenames." : "これは、ファイル名の特定の文字に問題があることを意味しています。",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "次のロケールをサポートするには、システムに必要なパッケージをインストールすることを強くおすすめします: %s。",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "URLがドメインのルート(/)で終わっていない場合で、システムのcronを利用している場合は、URLの生成に問題が発生します。その場合は、config.php ファイルの中の \"overwrite.cli.url\" オプションをインストールしたwebrootのパスに設定してください。( 推奨: \"%s\" ) ",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "CLI から cronジョブを実行することができませんでした。次の技術的なエラーが発生しています：",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">インストールガイド ↗</a>をもう一度チェックして、<a href=\"%s\">ログ</a> にあるエラーまたは警告について確認してください。",
     "All checks passed." : "すべてのチェックに合格しました。",
     "Background jobs" : "バックグラウンドジョブ",
     "Last job ran %s." : "最終ジョブ実行: %s",
@@ -290,7 +287,6 @@ OC.L10N.register(
     "Tips & tricks" : "ヒントとコツ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLiteがデータベースとして使用されています。大規模な運用では別のデータベースに切り替えることをお勧めします。",
     "This is particularly recommended when using the desktop client for file synchronisation." : "これは、ファイル同期にデスクトップクライアントを使用する場合に特に推奨されます。",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "他のデータベースに移行する場合はコマンドラインツール: 'occ db:convert-type' を使うか、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> ドキュメント ↗</a>を参照してください。",
     "How to do backups" : "バックアップ方法",
     "Advanced monitoring" : "詳細モニタリング",
     "Performance tuning" : "パフォーマンスチューニング",
@@ -396,10 +392,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHPでインラインドキュメントブロックを取り除く設定になっています。これによりコアアプリで利用できないものがいくつかあります。",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%2$s よりも古いバージョンの %1$s がインストールされています。安定した稼働とパフォーマンスの観点から、新しいバージョンの %1$s にアップデートすることをお勧めします。",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP のモジュール 'fileinfo' が見つかりません。mimeタイプの検出を精度良く行うために、このモジュールを有効にすることを強くお勧めします。",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "ファイルの書き込み時のロックが無効になっており、競合時に問題となる可能性があります。この問題を避ける為に config.php 中の 'filelocking.enabled' を有効にしてください。詳細については、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">ドキュメント↗ </a>を参照してください。",
     "This means that there might be problems with certain characters in file names." : "これは、ファイル名の特定の文字に問題があることを意味しています。",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "次のロケールをサポートするには、システムに必要なパッケージをインストールすることを強くおすすめします: %s。",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "URLがドメインのルート(/)で終わっていない場合で、システムのcronを利用している場合は、URLの生成に問題が発生します。その場合は、config.php ファイルの中の \"overwrite.cli.url\" オプションをインストールしたwebrootのパスに設定してください。(推奨: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "CLI から cronジョブを実行することができませんでした。次の技術的なエラーが発生しています：",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">インストールガイド ↗</a>をもう一度チェックして、<a href=\"%s\">ログ</a> にあるエラーまたは警告について確認してください。",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "最終cronジョブ実行: %s",
     "Last cron job execution: %s. Something seems wrong." : "最終cronジョブ実行: %s  何らかの問題があります。",
@@ -408,6 +406,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "システムのcronサービスを利用して、15分間隔でcron.phpファイルを実行します。",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "これを実行するにはPHPのposix拡張が必要です。詳細については、{linkstart} PHPドキュメント{linkend}を参照してください。",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "共有ダイアログでのユーザー名の自動補完を有効にする。このチェックを無効にした場合は、完全なユーザー名を入力する必要があります。",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "他のデータベースに移行する場合はコマンドラインツール: 'occ db:convert-type' を使うか、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> ドキュメント ↗</a>を参照してください。",
     "Uninstall app" : "アプリをアンインストール",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "こんにちは、<br><br>あなたのアカウント %s が利用できるようになりました。<br><br>ユーザー名: %s<br>接続URL: <a href=\"%s\">%s</a><br><br>",
     "Cheers!" : "それでは！",
diff --git a/settings/l10n/ja.json b/settings/l10n/ja.json
index 5b2d631ce94..eb3a5dc0fba 100644
--- a/settings/l10n/ja.json
+++ b/settings/l10n/ja.json
@@ -243,20 +243,17 @@
     "Start migration" : "移行を開始",
     "Security & setup warnings" : "セキュリティ＆セットアップ警告",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHPのシステム環境変数が正しく設定されていないようです。getenv(\"PATH\") コマンドでテストして何も値を返さないことを確認してください。",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "PHP設定の注意事項と php-fpmを利用する場合のサーバー向け設定を <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> インストールドキュメント ↗</a> で確認してください。",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "\"config\"は読み取り専用になってます。そのためにWEBインターフェースで設定できません可能性があります。さらに、更新時に\"config\"ファイルを書き込み権限を与えることが必要",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHPでインラインドキュメントブロックを取り除く設定になっています。これによりコアアプリで利用できないものがいくつかあります。",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "これは、Zend OPcacheやeAccelerator 等のキャッシュ/アクセラレーターが原因かもしれません。",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "あなたのデータベースは \"READ COMMITED\" トランザクション分離レベルで動作していません。このことにより複数のアクションが平行して実行される場合に問題が起こる可能性があります。",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%2$s よりも古いバージョンの %1$s がインストールされています。安定した稼働とパフォーマンスの観点から、新しいバージョンの %1$s にアップデートすることをお勧めします。",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP のモジュール 'fileinfo' が見つかりません。mimeタイプの検出を精度良く行うために、このモジュールを有効にすることを強くお勧めします。",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "ファイルの書き込み時のロックが無効になっており、競合時に問題となる可能性があります。この問題を避ける為に config.php 中の 'filelocking.enabled' を有効にしてください。詳細については、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">ドキュメント↗ </a>を参照してください。",
     "System locale can not be set to a one which supports UTF-8." : "システムロケールを UTF-8 をサポートするロケールに設定できません。",
     "This means that there might be problems with certain characters in filenames." : "これは、ファイル名の特定の文字に問題があることを意味しています。",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "次のロケールをサポートするには、システムに必要なパッケージをインストールすることを強くおすすめします: %s。",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "URLがドメインのルート(/)で終わっていない場合で、システムのcronを利用している場合は、URLの生成に問題が発生します。その場合は、config.php ファイルの中の \"overwrite.cli.url\" オプションをインストールしたwebrootのパスに設定してください。( 推奨: \"%s\" ) ",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "CLI から cronジョブを実行することができませんでした。次の技術的なエラーが発生しています：",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">インストールガイド ↗</a>をもう一度チェックして、<a href=\"%s\">ログ</a> にあるエラーまたは警告について確認してください。",
     "All checks passed." : "すべてのチェックに合格しました。",
     "Background jobs" : "バックグラウンドジョブ",
     "Last job ran %s." : "最終ジョブ実行: %s",
@@ -288,7 +285,6 @@
     "Tips & tricks" : "ヒントとコツ",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLiteがデータベースとして使用されています。大規模な運用では別のデータベースに切り替えることをお勧めします。",
     "This is particularly recommended when using the desktop client for file synchronisation." : "これは、ファイル同期にデスクトップクライアントを使用する場合に特に推奨されます。",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "他のデータベースに移行する場合はコマンドラインツール: 'occ db:convert-type' を使うか、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> ドキュメント ↗</a>を参照してください。",
     "How to do backups" : "バックアップ方法",
     "Advanced monitoring" : "詳細モニタリング",
     "Performance tuning" : "パフォーマンスチューニング",
@@ -394,10 +390,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHPでインラインドキュメントブロックを取り除く設定になっています。これによりコアアプリで利用できないものがいくつかあります。",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%2$s よりも古いバージョンの %1$s がインストールされています。安定した稼働とパフォーマンスの観点から、新しいバージョンの %1$s にアップデートすることをお勧めします。",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP のモジュール 'fileinfo' が見つかりません。mimeタイプの検出を精度良く行うために、このモジュールを有効にすることを強くお勧めします。",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "ファイルの書き込み時のロックが無効になっており、競合時に問題となる可能性があります。この問題を避ける為に config.php 中の 'filelocking.enabled' を有効にしてください。詳細については、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">ドキュメント↗ </a>を参照してください。",
     "This means that there might be problems with certain characters in file names." : "これは、ファイル名の特定の文字に問題があることを意味しています。",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "次のロケールをサポートするには、システムに必要なパッケージをインストールすることを強くおすすめします: %s。",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "URLがドメインのルート(/)で終わっていない場合で、システムのcronを利用している場合は、URLの生成に問題が発生します。その場合は、config.php ファイルの中の \"overwrite.cli.url\" オプションをインストールしたwebrootのパスに設定してください。(推奨: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "CLI から cronジョブを実行することができませんでした。次の技術的なエラーが発生しています：",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">インストールガイド ↗</a>をもう一度チェックして、<a href=\"%s\">ログ</a> にあるエラーまたは警告について確認してください。",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "最終cronジョブ実行: %s",
     "Last cron job execution: %s. Something seems wrong." : "最終cronジョブ実行: %s  何らかの問題があります。",
@@ -406,6 +404,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "システムのcronサービスを利用して、15分間隔でcron.phpファイルを実行します。",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "これを実行するにはPHPのposix拡張が必要です。詳細については、{linkstart} PHPドキュメント{linkend}を参照してください。",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "共有ダイアログでのユーザー名の自動補完を有効にする。このチェックを無効にした場合は、完全なユーザー名を入力する必要があります。",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "他のデータベースに移行する場合はコマンドラインツール: 'occ db:convert-type' を使うか、<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> ドキュメント ↗</a>を参照してください。",
     "Uninstall app" : "アプリをアンインストール",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "こんにちは、<br><br>あなたのアカウント %s が利用できるようになりました。<br><br>ユーザー名: %s<br>接続URL: <a href=\"%s\">%s</a><br><br>",
     "Cheers!" : "それでは！",
diff --git a/settings/l10n/ka_GE.js b/settings/l10n/ka_GE.js
index e469475909f..693c529d2f7 100644
--- a/settings/l10n/ka_GE.js
+++ b/settings/l10n/ka_GE.js
@@ -1,59 +1,456 @@
 OC.L10N.register(
     "settings",
     {
-    "Authentication error" : "ავთენტიფიკაციის შეცდომა",
-    "Email saved" : "იმეილი შენახულია",
-    "Couldn't update app." : "ვერ მოხერხდა აპლიკაციის განახლება.",
-    "Email sent" : "იმეილი გაიგზავნა",
+    "{actor} changed your password" : "{actor}-მა შეცვალა თქვენი პაროლი",
+    "You changed your password" : "თქვენ შეცვალეთ თქვენი პაროლი",
+    "Your password was reset by an administrator" : "თქვენი პაროლი ადმინისტრატორმა აღადგინა",
+    "{actor} changed your email address" : "{actor}-მა შეცვალა თქვენი ელ-ფოსტის მისამართი",
+    "You changed your email address" : "თქვენ შეცვალეთ თქვენი ელ-ფოსტის მისამართი",
+    "Your email address was changed by an administrator" : "თქვენი ელ-ფოსტის მისამართი ადმინისტრატორის მიერ შეიცვალა",
+    "Security" : "უსაფრთხოება",
+    "You successfully logged in using two-factor authentication (%1$s)" : "თქვენ ორ-ფაქტორიანი აუტენტიფიკაციით წარმატებით გაიარეთ ავტორიზაცია (%1$s)",
+    "A login attempt using two-factor authentication failed (%1$s)" : "ავტორიზაცია ორ-ფაქტორიანი აუტენტიფიკაციით ვერ მოხერხდა (%1$s)",
+    "Your <strong>password</strong> or <strong>email</strong> was modified" : "<strong>თქვენი პაროლი</strong> ან <strong>ელ-ფოსტის მისამართი</strong> შეიცვალა",
+    "Your apps" : "თქვენი აპლიკაციები",
+    "Updates" : "განახლებები",
+    "Enabled apps" : "მოქმედი აპლიკაციები",
+    "Disabled apps" : "არამოქმედი აპლიკაციები",
+    "App bundles" : "აპლიკაციების შეკვრები",
+    "Wrong password" : "არასწორი პაროლი",
+    "Saved" : "დამახსოვრდა",
+    "No user supplied" : "მომხმარებელი არ იქნა მოწოდებული",
+    "Unable to change password" : "პაროლის ცვილება შეუძლებელია",
+    "Authentication error" : "აუტენტიფიკაციის შეცდომა",
+    "Please provide an admin recovery password; otherwise, all user data will be lost." : "გთხოვთ მოგვაწოდოთ ადმინისტრატორის აღდგენის პაროლი; სხვა შემთხვევაში ყველა მონაცემი დაიკარგება.",
+    "Wrong admin recovery password. Please check the password and try again." : "არასწორი ადმინისტრატორის აღდგენის პაროლი. გთხოვთ გადაამოწმოთ პაროლი და სცადოთ ახლიდან.",
+    "Backend doesn't support password change, but the user's encryption key was updated." : "ბექენდს არ აქვს პაროლის ცვლილების მხარდაჭერა, თუმცა მომხმარებლის შიფრაციის გასახები განახლდა.",
+    "installing and updating apps via the app store or Federated Cloud Sharing" : "აპლიკაციების app store-იდან დაყენება და განახლება ან ფედერალიზირებული ქლაუდ გაზიარება",
+    "Federated Cloud Sharing" : "ფერერალიზირებული ქლაუდ გაზიარება",
+    "cURL is using an outdated %s version (%s). Please update your operating system or features such as %s will not work reliably." : "cURL მოძველებულია %s ვერსია (%s). გთხოვთ განაახლოთ თქვენი ოპერაციული სისტემა ან ისეთი ფუნქციები როგორებიცაა %s კარგად არ იმუშავებენ.",
+    "A problem occurred, please check your log files (Error: %s)" : "წარმოიშვა შეცდომა, გთხოვთ იხილოთ თქვენი ლოგ ფაილები (შეცდომა: %s)",
+    "Migration Completed" : "მიგრაცია დასრულდა",
+    "Group already exists." : "ჯგუფი უკვე არსებობს.",
+    "Unable to add group." : "ჯგუფის დამატება ვერ ხორციელდება.",
+    "Unable to delete group." : "ჯგუფის წაშლა ვერ ხორციელდება.",
+    "Invalid SMTP password." : "არასწორი SMTP პაროლი.",
+    "Email setting test" : "ელ-ფოსტის დაყენების შემოწმება",
+    "Well done, %s!" : "ყველაფერი კარგადაა, %s!",
+    "If you received this email, the email configuration seems to be correct." : "იმ შემთხვევაში თუ მიიღეთ ეს ელ-წერილი, ელ-ფოსტის კონფიგურაცია კარგად უნდა იყოს.",
+    "Email could not be sent. Check your mail server log" : "ელ-წერილი ვერ იგზავნება. გთხოვთ შეამოწმოთ მეილ-სერვერის ლოგი",
+    "A problem occurred while sending the email. Please revise your settings. (Error: %s)" : "ელ-წერილის გაგზავნისას წარმოიშვა შეცდომა. გთხოვთ გადახედოთ თქვენს პარამეტრებს. (შეცდომა: %s)",
+    "You need to set your user email before being able to send test emails." : "სატესტო წერილების გაგზავნამდე უნდა დააყენოთ თქვენი მომხმარებლის ელ-ფოსტა.",
+    "Invalid mail address" : "არასწორი საფოსტო მისამართი",
+    "No valid group selected" : "სწორი ჯგუფი არაა არჩეული",
+    "A user with that name already exists." : "მომხმარებელი ამ სახელით უკვე არსებობს.",
+    "To send a password link to the user an email address is required." : "პაროლის ბმულის მომხმარებელთან გასაგზავნად აუცილებელია ელ-ფოსტის მისამართი.",
+    "Unable to create user." : "მომხმარებლის შექმნა ვერ ხერხდება.",
+    "Unable to delete user." : "მომხმარებლის გაუქმება ვერ ხერხდება.",
+    "Error while enabling user." : "მომხმარებლის გააქტიურება ვერ ხერხდება.",
+    "Error while disabling user." : "მომხმარებლის დეაქტივაცია ვერ ხერხდება.",
+    "In order to verify your Twitter account, post the following tweet on Twitter (please make sure to post it without any line breaks):" : "თქვენი Twitter-ის ანგარიშის დასამოწმებლად, Twitter-ზე დაპოსტეთ შემდეგი (მიაქციათ ყურადღება რომ პოსტავთ ხაზის წყვეტების გარეშე): ",
+    "In order to verify your Website, store the following content in your web-root at '.well-known/CloudIdVerificationCode.txt' (please make sure that the complete text is in one line):" : "თქვენი საიტის დასამოწმებლად, შემდეგი მოცულობა მოათავსეთ web-root-ში '.well-known/CloudIdVerificationCode.txt' ადგილას (დარწმუნდით რომ მთელი ტექსტი ერთ ხაზზეა): ",
+    "Settings saved" : "პარამეტრები შენახულია",
+    "Unable to change full name" : "სრული სახელის ცვლილება ვერ ხერხდება",
+    "Unable to change email address" : "ელ-ფოსტის მისამართი ვერ იცვლება",
+    "Your full name has been changed." : "თქვენი სრული სახელი შეიცვალა.",
+    "Forbidden" : "აკრძალულია",
+    "Invalid user" : "არასწორი მომხმარებელი",
+    "Unable to change mail address" : "ელ-ფოსტის მისამართის შეცვლა ვერ ხერხდება",
+    "Email saved" : "ელ-ფოსტის მისამართი შენახულია",
+    "%1$s changed your password on %2$s." : "%1$s-მა თქვენი პაროლი შეცვალა %2$s-ზე.",
+    "Your password on %s was changed." : "თქვენი პაროლი %s-ზე შეიცვალა.",
+    "Your password on %s was reset by an administrator." : "თქვენი პაროლი %s-ზე ადმინისტრატორმა აღადგინა.",
+    "Password for %1$s changed on %2$s" : "პაროლი %1$s-სთვის შეიცვალა %2$s-ზე",
+    "Password changed for %s" : "პაროლი %s-სთვის შეიცვალა",
+    "If you did not request this, please contact an administrator." : "თუ ეს არ მოგითხოვიათ, მიმართეთ ადმინისტრატორს",
+    "%1$s changed your email address on %2$s." : "%1$s-მა შეცვალა თქვენი ელ-ფოსტის მისამართი %2$s-ზე.",
+    "Your email address on %s was changed." : "თქვენი ელ-ფოსტის მისამართი %s-ზე შეიცვალა.",
+    "Your email address on %s was changed by an administrator." : "თქვენი ელ-ფოსტის მისამართი %s-ზე ადმინისტრატორმა შეცვალა.",
+    "Email address for %1$s changed on %2$s" : "ელ-ფოსტის მისამართი %1$s-სთვის შეიცვალა %2$s-ზე",
+    "Email address changed for %s" : "ელ-ფოსტის მისამართი %s-სთვის შეიცვალა",
+    "The new email address is %s" : "ახალი ელ-ფოსტის მისამართია %s",
+    "Your %s account was created" : "თქვენი %s ანგარიში შექმნილია",
+    "Welcome aboard" : "კეთილი იყოს თქვენი ბორტზე მობრძანება",
+    "Welcome aboard %s" : "%s, კეთილი იყოს თქვენი ბორტზე მობრძანება",
+    "You now have an %s account, you can add, protect, and share your data." : "ახლა გაქვთ %s ანგარიში, შეგიძლიათ დაამატოთ, დაიცვათ და გააზიაროთ თქვენი მონაცემები.",
+    "Your username is: %s" : "თქვენი მომხმარებლის სახელია: %s",
+    "Set your password" : "დააყენეთ თქვენი პაროლი",
+    "Go to %s" : "გადადით %s-ზე",
+    "Install Client" : "დააყენეთ კლიენტი",
+    "Password confirmation is required" : "საჭიროა პაროლის დამოწმება",
+    "Couldn't remove app." : "აპლიკაციის წაშლა ვერ მოხერხდა.",
+    "Couldn't update app." : "აპლიკაციის განახლება ვერ მოხერხდა.",
+    "Are you really sure you want add {domain} as trusted domain?" : "დამდვილად გსურთ {domain}-ის დამატება სანდო დომენად?",
+    "Add trusted domain" : "სანდო დომენის დამატება",
+    "Migration in progress. Please wait until the migration is finished" : "მიმდინარეობს მიგრაცია. გთხოვთ დაელოდოთ მიგრაციის დასრულებას",
+    "Migration started …" : "მიგრაცია დაიწყო ...",
+    "Not saved" : "არაა შენახული",
+    "Sending…" : "იგზავნება...",
+    "Email sent" : "ელ-წერილი გაიგზავნა",
+    "Official" : "ოფიციალური",
     "All" : "ყველა",
+    "Update to %s" : "განახლდეს %s-ზე",
+    "No apps found for your version" : "აპლიკაციები თქვენი ვერსიისთვის ვერ იქნა ნაპოვნი",
+    "The app will be downloaded from the app store" : "აპლიკაცია გადმოწერილ იქნება app store-იდან",
+    "Official apps are developed by and within the community. They offer central functionality and are ready for production use." : "ოფიციალური აპლიკაციები განვითარებულია და მოქცეულია ჩვენს საზოგადოებაში. ისინი გთავაზობენ ცენტრალურ ფუნქციონირებას და საწარმოო გამოყენებისათვის მზადყოფნაში არიან.",
+    "Approved apps are developed by trusted developers and have passed a cursory security check. They are actively maintained in an open code repository and their maintainers deem them to be stable for casual to normal use." : "დამოწმებული აპლიკაციები განვითარებულია სანდო დეველოპერების მიერ, მათ გავლილი აქვთ მრავალი უსაფრთხოების ტესტი. ისინი აქტიურად ნარჩუნდებიან ღია კოდის საცავში და მათ შემნარჩუნებლებს მიაჩნიათ რომ ისინი სტაბულარად მუშაობენ.",
+    "This app is not checked for security issues and is new or known to be unstable. Install at your own risk." : "აპლიკაცია არაა შემოწმებული უსაფრთხოების პრობელემბზე და ახალია, ან ცნობილია რომ არაა სტაბილური. დააყენეთ თქვენი რისკით.",
+    "Disabling app …" : "აპლიკაციის დეაქტივაცია ...",
+    "Error while disabling app" : "აპლიკაციის დეაქტივაციისას წარმოიქმნა შეცდომა",
     "Disable" : "გამორთვა",
     "Enable" : "ჩართვა",
+    "Enabling app …" : "აპლიკაციის ამოქმედება ...",
+    "Error while enabling app" : "აპლიკაციის ამოქმედებისას წარმოიქმნა შეცდომა",
+    "Error: This app can not be enabled because it makes the server unstable" : "შეცდომა: ეს აპლიკაცია ვერ მოქმედდება რადგანაც სერვერს ხდის არასტაბილურს",
+    "Error: Could not disable broken app" : "შეცდომა: გაფუჭებული აპლიკაციის დეაქტივაცია ვერ მოხერხდა",
+    "Error while disabling broken app" : "გაფუჭებული აპლიკაციის დეაქტივაციისას წარმოიშვა შეცდომა",
+    "No app updates available" : "აპლიაკციების განახლებები არაა ხელმისაწვდომი",
     "Updating...." : "მიმდინარეობს განახლება....",
     "Error while updating app" : "შეცდომა აპლიკაციის განახლების დროს",
     "Updated" : "განახლებულია",
+    "Removing …" : "იშელბა ...",
+    "Error while removing app" : "აპლიკაციის წაშლისას წარმოიშვა შეცდომა",
+    "Remove" : "წაშლა",
+    "The app has been enabled but needs to be updated. You will be redirected to the update page in 5 seconds." : "აპლიკაცია ამოქმედდა თუმცა საჭიროებს განახლებას. 5 წამში გადამისამართდებით განახლების გვერდზე.",
+    "App update" : "აპლიკაციის განახლება",
+    "Approved" : "დამოწმებულია",
+    "Experimental" : "ექსპერიმენტალურია",
+    "No apps found for {query}" : "აპლიკაციები {query}-სთივ ვერ მოძებნა",
+    "Enable all" : "ყველას ამოქმედება",
+    "Allow filesystem access" : "ფაილს-სისტემაზე წვდომის მინიჭება",
+    "Disconnect" : "კავშირის გაწყვეტა",
+    "Revoke" : "წვდომის გაუქმება",
+    "Internet Explorer" : "Internet Explorer-ი",
+    "Edge" : "Edge-ი",
+    "Firefox" : "Firefox-ი",
+    "Google Chrome" : "Google Chrome-ი",
+    "Safari" : "Safari",
+    "Google Chrome for Android" : "Google Chrome Android-ისთვის",
+    "iPhone iOS" : "iPhone iOS",
+    "iPad iOS" : "iPad iOS",
+    "iOS Client" : "iOS კლიენტი",
+    "Android Client" : "Android კლიენტი",
+    "Sync client - {os}" : "სინქ. კლიენტი - {os}",
+    "This session" : "ეს სესია",
+    "Copy" : "კოპირება",
+    "Copied!" : "კოპირებულია",
+    "Not supported!" : "არაა მხარდაჭერილი!",
+    "Press ⌘-C to copy." : "კოპირებისთვის დააჭირეთ ⌘-C-ს.",
+    "Press Ctrl-C to copy." : "კოპირებისთვის დააჭირეთ Ctrl-C-ს.",
+    "Error while loading browser sessions and device tokens" : "ბრაუზერის სესიების და მოწყობილობების ტოკენების ჩატვირთვისას წარმოიშვა შეცდომა",
+    "Error while creating device token" : "მოწყობილობის ტოკენის ჩატვირთვისას წარმოიქმნა შეცდომა",
+    "Error while deleting the token" : "ტოკენის წაშლისას წარმოიქმნა შეცდომა",
+    "An error occurred. Please upload an ASCII-encoded PEM certificate." : "წარმოიქმნა შეცდომა. გთხოვთ ატვირთოთ ASCII-თ კოდირებული PEM სერტიფიკატი.",
+    "Valid until {date}" : "ვარგისია {date}-მდე",
     "Delete" : "წაშლა",
+    "Local" : "ლოკალური",
+    "Private" : "პირადი",
+    "Only visible to local users" : "გამოჩნდება მხოლოდ ლოკალურ მომხმარებლებთან",
+    "Only visible to you" : "გამოჩნდება მხოლოდ თქვენთან",
+    "Contacts" : "კონტაქტები",
+    "Visible to local users and to trusted servers" : "გამოჩნდება ლოკალურ მომხმარებლებთან და სანდო სერვერებთან",
+    "Public" : "ღია",
+    "Will be synced to a global and public address book" : "სინქრონიზაცია მოხდება გლობალურ და ღია მისამართების წიგნში",
+    "Verify" : "დამოწმება",
+    "Verifying …" : "მოწმდება ...",
+    "An error occured while changing your language. Please reload the page and try again." : "თქვენი ენის ცვლილებისას წარმოიქმნა შეცდომა. გთხოვთ განაახლოთ გვერდი და სცადოთ ახლიდან.",
+    "Select a profile picture" : "აირჩიეთ პროფილის სურათი",
+    "Very weak password" : "ძალიან სუსტი პაროლი",
+    "Weak password" : "სუსტი პაროლი",
+    "So-so password" : "ნორმალური პაროლი",
+    "Good password" : "კარგი პაროლი",
+    "Strong password" : "ძლიერი პაროლ",
     "Groups" : "ჯგუფები",
+    "Unable to delete {objName}" : "{objName}-ის წაშლა ვერ ხერხდება",
+    "Error creating group: {message}" : "ჯგუფის შექმნისას წარმოიშვა შეცდომა: {message}",
+    "A valid group name must be provided" : "წარმოჩენილ უნდა იყოს სწორი ჯგუფის სახელი",
+    "deleted {groupName}" : "{groupName} წაიშალა",
     "undo" : "დაბრუნება",
+    "{size} used" : "მოხმარებულია {size}",
     "never" : "არასდროს",
+    "deleted {userName}" : "{userName} გაუქმდა",
+    "No user found for <strong>{pattern}</strong>" : "<strong>{pattern}</strong>-ისთვის მომხმარებელი ვერ იქნა ნაპოვნი",
+    "Unable to add user to group {group}" : "მოხმარებლის ჯგუფში {group} დამატება ვერ ხერხდება",
+    "Unable to remove user from group {group}" : "მომხმარებლის ამოშლა ჯგუფიდან {group} ვერ ხერხდება",
+    "Add group" : "ჯგუფის დამატება",
+    "Invalid quota value \"{val}\"" : "კვოტის არასწორი მნიშნველობა \"{val}\"",
+    "no group" : "ჯგუფი არაა",
+    "Password successfully changed" : "პაროლი წარმატებით შეიცვალა",
+    "Changing the password will result in data loss, because data recovery is not available for this user" : "პაროლის შეცვლა გამოიწვევს მონაცემების დაკარგვას, რადგან მონაცემების აღდგენა ამ მომხმარებლისთვის არაა მოქმედი",
+    "Could not change the users email" : "მომხმარებლის ელ-ფოსტის მისამრთი ვერ შეიცვალა",
+    "Error while changing status of {user}" : "{user}-ის სტატუსის შეცვლისას წარმოიშვა შეცდომა",
     "A valid username must be provided" : "უნდა მიუთითოთ არსებული მომხმარებლის სახელი",
+    "Error creating user: {message}" : "მომხმარებლის შექმნისას წარმოიშვა შეცდომა: {message}",
     "A valid password must be provided" : "უნდა მიუთითოთ არსებული პაროლი",
+    "A valid email must be provided" : "უნდა მიუთითოთ სწორი ელ-ფოსტის მისამართი",
+    "Developer documentation" : "დეველოპერის დოკუმენტაცია",
+    "View in store" : "იხილეთ store-ში",
+    "Limit to groups" : "ლიმიტი ჯგუფებზე",
+    "by %s" : "%s-ს მიერ",
+    "%s-licensed" : "%s-ლიცენზირებული",
+    "Documentation:" : "დოკუმენტაცია",
+    "User documentation" : "მომხმარებლის დოკუმენტაცია",
+    "Admin documentation" : "ადმინისტრატორის დოკუმენტაცია",
+    "Visit website" : "საიტზე სტუმრობა",
+    "Report a bug" : "განაცხადეთ შეცდომის შესახებ",
+    "Show description …" : "აღწერილობის ჩვენება ...",
+    "Hide description …" : "არჭერილობის დამალვა ...",
+    "This app has an update available." : "აპლიკაციას გააჩნია ხელმისაწვდომი განახლება.",
+    "This app has no minimum Nextcloud version assigned. This will be an error in the future." : "ეს აპლიკაცია არ საზღვრავს Nextcloud-ის მინიმალურ ვერსიას. სამომავლოდ ეს ჩაითვლება შეცდომად.",
+    "This app has no maximum Nextcloud version assigned. This will be an error in the future." : "ეს აპლიკაცია არ საზღვრავს Nextcloud-ის მაქსიმალურ ვერსიას. სამომავლოდ ეს ჩაითვლება შეცდომად.",
+    "This app cannot be installed because the following dependencies are not fulfilled:" : "ეს აპლიკაცია ვერ დაყენდა რადგან შემდეგი დამოკიდებულებები არაა დაკმაყოფილებული:",
+    "Enable only for specific groups" : "ამოქმედება მხოლოდ სპეციფიური ჯგუფებისათვის",
+    "SSL Root Certificates" : "SSL Root სერტიფიკატები",
+    "Common Name" : "საზოგადო სახელი",
+    "Valid until" : "ვარგისია",
+    "Issued By" : "განაცხადა",
+    "Valid until %s" : "ვარგისია %s-მდე",
+    "Import root certificate" : "root სერტიფიკატის იმპორტი",
+    "Administrator documentation" : "ადმინისტრატორის დოკუმენტაცია",
+    "Online documentation" : "ონლაინ დოკუმენტაცია",
     "Forum" : "ფორუმი",
-    "None" : "არა",
+    "Getting help" : "დახმარების მიღება",
+    "Commercial support" : "კომერციული მხარდაჭერა",
+    "None" : "არც ერთი",
     "Login" : "ლოგინი",
-    "Encryption" : "ენკრიპცია",
+    "Plain" : "ჩვეულებრივი",
+    "NT LAN Manager" : "NT LAN მენეჯერი",
+    "SSL/TLS" : "SSL/TLS",
+    "STARTTLS" : "STARTTLS",
+    "Email server" : "საფოსტო სერვერი",
+    "Open documentation" : "ღია დოკუმენტაცია",
+    "It is important to set up this server to be able to send emails, like for password reset and notifications." : "ამ სერვერის მოწყობა ელ-წერილების გასაგზვნად მნიშვნელოვანია, მაგ. პაროლის აღსადგენად და შეტყობინებების მისაღებად.",
+    "Send mode" : "გაგზავნის რეჟიმი",
+    "Encryption" : "შიფრაცია",
+    "From address" : "მისამართიდან",
+    "mail" : "წერილი",
+    "Authentication method" : "აუტენტიფიკაციის მეთოდი",
+    "Authentication required" : "აუტენტიფიკაცია საჭიროებს",
     "Server address" : "სერვერის მისამართი",
     "Port" : "პორტი",
-    "Credentials" : "იუზერ/პაროლი",
+    "Credentials" : "უფლებამოსილებანი",
+    "SMTP Username" : "SMTP მოხმარებლის სახელი",
+    "SMTP Password" : "SMTP მომხმარებლის პაროლი",
+    "Store credentials" : "უფლებამოსილებანის შენახვა",
+    "Test email settings" : "ელ-ფოსტის პარამეტრების შემომება",
+    "Send email" : "ელ-წერილის გაგზავნა",
+    "Server-side encryption" : "სერვერული-მხარის შიფრაცია",
+    "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "სერვერული-მხარის შიფრაცია იძლევა სერვერზე ატვირთული ფაილების შიფრაციის საშუალებას. ეს ფუნქცია ლიმიტს აწესებს მოქმედებაზე, ასე რომ გააქტიურედ მხოლოდ აუცილებლობისას.",
+    "Enable server-side encryption" : "სერვერული-მხარის შიფრაციის ამოქმედება",
+    "Please read carefully before activating server-side encryption: " : "სანამ გააქტიურებთ სერვერული-მხარის შიფრაციას გთხოვთ ყურადღებით გაეცნოთ:",
+    "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "შიფრაციის ჩართვის შემდეგ, სერვერზე ატვირთული ყველა ფაილი დაიშიფრება. იმ შემთხვევაში თუ აქტიური შიფრაციის მოდულს აქვს შიფრაციის დეაქტივაციის უნარი და ყველა წინაპირობა დაცულია (მაგ.: აღდგენის გასაღების დაყენება), სხვა დროს შეძლებთ მისი მოქმედების შეჩერებას.",
+    "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "მხოლოდ შიფრაცია არ იძლევა სისტემის უსაფრთხოების გარანტიას. მეტი ინფორმაციისთვის იმაზე თუ როგორ მუშაობს შიფრაციის აპლიკაცია იხილეთ დოკუემენტაცია და გაეცანით მოხმარების შემთხვევებს.",
+    "Be aware that encryption always increases the file size." : "იცოდეთ, შიფრაცია ყოველთვის ზრდის ფაილის ზომას.",
+    "It is always good to create regular backups of your data, in case of encryption make sure to backup the encryption keys along with your data." : "ყოველთვის კარგია თქვენი მონაცემების დაზღვევა, შიფრაციის შემთხვევაში თვენს მონაცემებთან ერთად აუცილებლად დააზღვიეთ შიფრაციის გასაღებებიც.",
+    "This is the final warning: Do you really want to enable encryption?" : "ეს ბოლო გაფრთხილებაა: ნამდვილად გსურთ შიფრაციის ამოქმედება?",
+    "Enable encryption" : "შიფრაციის ამოქმედება",
+    "No encryption module loaded, please enable an encryption module in the app menu." : "შიფრაციის მოდული არაა ჩატვირთული, გთხოვთ აამოქმედოთ ის აპლიკაციის მენიუდან. ",
+    "Select default encryption module:" : "აირჩიეთ შიფრაციის საწყისი მოდული:",
+    "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'" : "საჭიროა შიფრაციის გასაღებების მიგრაცია (ownCloud <= 8.0) ახალებზე. გთხოვთ აამოქმედოთ \"საწყისი მიგრაციის მოდუი\" და გაუშვათ 'occ encryption:migrate'",
+    "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one." : "საჭიროა შიფრაციის ძველი გასაღებების მიგრაცია (ownCloud <= 8.0) ახალებზე.",
+    "Start migration" : "მიგრაციის დაწყება",
+    "Security & setup warnings" : "უსაფრთხოების და მოწყობის გაფრთხილებები",
+    "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "თქვენი ნიმუშის უსაფრთხოებისა და გამართული მოქმედებისთვის მნიშვნელოვანია ყველაფერი სწორად იყოს კონფიგურირებული. თქვენს დასახმარებლად ვატარებთ გარკვეულ ავტომატიზირებულ შემოწმებს. გთხოვთ იხილოთ რჩევებისა და ხრიკების სექცია და მეტი ინფორმაციისთვის გადახედოთ დოკუმენტაციას.",
+    "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "როგორც ჩანს PHP სისტემის გარემოს ცვლადების მიღებისთვის არაა სწორად მოწყობილი. ეს ტესტი getenv(\"PATH\") ით აბრუნებს მხოლოდ ცარიელ პასუხს.",
+    "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "მხოლოდ კითხვადი კონფიუგაცია ამოქმედდა. ეს აჩერებს ვებ-ინტერფეისის მეშვეობით გარკვეული კონფიგურაციების შეცვლას. ამასთან ერთად ფაილი მოითხოვს განახლების ყოველ ეტაპზე გახდეს წერადი.",
+    "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "როგორც ჩანს PHP დაყენებულია ისე, რომ შიდა დოკუმენტური ბლოკები წაშალოს. ეს რამდენიმე მთავარ აპლიკაციას გახდის მიუწვდომელს.",
+    "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "ეს შესაძლოა გამოწვეული იყოს ისეთი კეშით/აქსელერატორით როგორიცაა Zend OPcache ან eAccelerator.",
+    "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "თქვენი მონაცემთა ბაზა არ მოქმედებს \"READ COMMITTED\" ტრანზაქციის იზოლაციის დონით. ამან შეიძლება გამოიწვიოს პრობლემა, როდესაც მრავალი ქმედება შესრულდება პარალელურად.",
+    "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s დაყენებულია %2$s-ზე დაბალი ვერსიით, სტაბილურობისთვის და ხარისხიანი მოქმედების მიზნებისთვის რეკომენდირებულია განაახლოთ ახალ %1$s ვერსიამდე.",
+    "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP მოდული 'fileinfo' არ არსებობს. ჩვენ გირჩევთ რომ აუცილებლად ჩართოთ ეს მოდული, რომ მიიღოთ კარგი შედეგები MIME ტიპის აღმოჩენისას.",
+    "System locale can not be set to a one which supports UTF-8." : "სისტემური ლოკალიზაცია ვერ ყენდება იმაზე რომელიც მხარს უჭერს UTF-8-ს.",
+    "This means that there might be problems with certain characters in filenames." : "ეს განაპირობებს ფაილის სახელში ზოგ ნიშანთან პრობლემის გამოჩენას.",
+    "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "ერთ-ერთი შემდეგ ლოკალიზაციათაგანის მხარდასაჭერად გთავაზობთ თქვნს სისტემაზე დააყენოთ აუცილებელი პაკეტები: %s.",
+    "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "თუ თქვენი სისტემა იყენებს კრონს და არაა ინსტალაცია არაა დაყენებული დომენის დასაწყისში, შესაძლოა გამოჩნდეს პრობლემები URL გენერაციასთან. ამ პრობლემებისგან თავის ასარიდებლად, \"overwrite.cli.url\" პარამეტრის თქვენს config.php ფაილში მიანიჭერთ ინსტალაციის მისამართი (რეკომენდირებულია: \"%s\")",
+    "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "CLI-ით კრონ საქმის ეგზეკუცია ვერ მოხერხდა. წარმოიშვა შემდეგი ტექნიკური შეცდომები:",
+    "All checks passed." : "ყველა შემოწმებამ ჩაიარა დადებითად.",
+    "Background jobs" : "ფონური საქმეები",
+    "Last job ran %s." : "ბოლო საქმის გაშვება - %s.",
+    "Last job execution ran %s. Something seems wrong." : "ბოლო საქმე გაიშვა %s. რაღაც არასწორია.",
+    "Background job didn’t run yet!" : "ფონური საქმე ჯერ არ გაშვებულა!",
+    "For optimal performance it's important to configure background jobs correctly. For bigger instances 'Cron' is the recommended setting. Please see the documentation for more information." : "ოპტიმალური მოღვაწეობისთვის მნიშვნელოვანია ფონური საქმეების სწორი კონფიგურაცია. დიდი ნიმუშებისთვის 'კრონი' რეკომენდირებული არჩევანია. გთხოვთ მეტი ინფორმაციისთვის იხილოთ დოკუმენტაცია.",
     "Execute one task with each page loaded" : "გაუშვი თითო მოქმედება ყველა ჩატვირთულ გვერდზე",
+    "cron.php is registered at a webcron service to call cron.php every 15 minutes over HTTP." : "cron.php რეგისტრირებულია ვებკრონის სერვისით რომ 15 წუთში ერთხელ HTTP-თი გაიშვას.",
+    "Use system cron service to call the cron.php file every 15 minutes." : "გამოიყენეთ სისტემის კრონი cron.php ფაილის გასაშვებად ყოველ 15 წუთში.",
+    "The cron.php needs to be executed by the system user \"%s\"." : "cron.php უნდა გაუშვას სისტემურმა მოხმარებელმა \"%s\".",
+    "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "ამის გასაშვებად საჭიროა გქონდეს PHP POSIX გაფართოება. მეტი დეტალებისთვის იხილეთ {linkstart}PHP დოკუმენტაცია{linkend}. ",
     "Version" : "ვერსია",
     "Sharing" : "გაზიარება",
+    "As admin you can fine-tune the sharing behavior. Please see the documentation for more information." : "როგორც ადმინისტრატორს შეგიძლიათ გაზიარების ქცევის კორექტირება. დამატებითი ინფორმაციისთვის იხილეთ დოკუმენტაცია.",
     "Allow apps to use the Share API" : "დაუშვი აპლიკაციების უფლება  Share API –ზე",
+    "Allow users to share via link" : "მიეცით მოხმარებლებს ბმულით გაზიარების უფლება",
+    "Allow public uploads" : "საქვეყნო ატვირთების დაშვება",
+    "Always ask for a password" : "ყოველთვის მოხდეს პაროლის მოთხოვნა",
+    "Enforce password protection" : "პროლით დაცვის იძულება",
+    "Set default expiration date" : "დააყენეთ საწყისი ვადის ამოწურვის თარიღი",
+    "Expire after " : "ვადის ამოწურვა",
+    "days" : "დღე",
+    "Enforce expiration date" : "ვადის ამოწურვის თარიღის იძულება",
     "Allow resharing" : "გადაზიარების დაშვება",
+    "Allow sharing with groups" : "ჯგუფებთან გაზიარების მხარდაჭერა",
+    "Restrict users to only share with users in their groups" : "შეზღუდეთ მომხმარებლები გააზიარონ მომხმარებლებთან რომლებიც მიეკუთვნებიან მათ ჯგუფებს",
+    "Exclude groups from sharing" : "აკრძალეთ ჯგუფების გაზიარება",
+    "These groups will still be able to receive shares, but not to initiate them." : "ეს ჯგუფები ისევ მიიღებენ გაზიარებებს, მაგრამ ვერ წამოიწყებენ მათ.",
+    "Allow username autocompletion in share dialog. If this is disabled the full username or email address needs to be entered." : "მიეცით მომხმარებლებს ავტოდასრულების უფლება გაზიარების დიალოგებში. იმ შემთხვევაში თუ ეს ფუნქცია არაა მოქმედი, საჭირო იქნება სრული მომხმარებლის სახელის ან ელ-ფოსტის მისამართის შეყვანა.",
+    "Show disclaimer text on the public link upload page. (Only shown when the file list is hidden.)" : "პასუხისმგებლობის შეზღუდვის ტექსტის ჩვენება ღია ბმულის ატვირთვის გვერდზე. (ჩანს მხოლოდ მაშინ, როდესაც ფაილების სია დამალულია.)",
+    "This text will be shown on the public link upload page when the file list is hidden." : "ეს ტექსტი გამოჩნდება ღია ბმულის ატვირთვის გვერდზე, როდესაც ფაილების სია დამალულია.",
+    "Tips & tricks" : "რცევები და ხრიკები",
+    "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "ამ ნიმუშის ოპტიმიზირებულად მოწყობისა და გამოყენებისთვის მრავალი ფუნქცია და კონფიგურაციის პარამეტრია ხელმისაწვდომი. აქ რამდენიმე კურსორია მეტი ინფორმაციისთვის.",
+    "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "ამჟამად ბექენდზე მონაცემთა ბაზად მოიხმარება SQLite. უფრო დიდი ინსტალაციებისთვის რეკომენდაციას გიწევთ აირჩიოთ სხვა მონაცემთა ბაზა.",
+    "This is particularly recommended when using the desktop client for file synchronisation." : "ეს კერძოდ რეკომედირებულია განსაკუთრებით მაშინ, როდესაც ფაილების სინქრონიზაციისთვის იყენებთ დესკტოპ-კლიენტს.",
+    "How to do backups" : "როგორ შევქმნათ რეზერვები",
+    "Advanced monitoring" : "პროგრესიული მონიტორინგი",
+    "Performance tuning" : "მოქმედების რეგულირება",
+    "Improving the config.php" : "config.php-ს გაუმჯობესება",
+    "Theming" : "ვიზუალური თემები",
+    "Check the security of your Nextcloud over our security scan" : "შეამოწმეთ თქვენი Nextcloud ჩვენი უსფრთხოების შემოწმებით",
+    "Hardening and security guidance" : "განმტკიცებისა და უსაფრთხოების სახელმძღვანელო",
+    "Personal" : "პირადი",
+    "Administration" : "ადმინისტრაცია",
+    "You are using <strong>%s</strong> of <strong>%s</strong>" : "თქვენ იყენებთ <strong>%s</strong> სულ <strong>%s</strong>-დან",
+    "You are using <strong>%s</strong> of <strong>%s</strong> (<strong>%s %%</strong>)" : "თქვენ იყენებთ <strong>%s</strong> სულ <strong>%s</strong>-დან (<strong>%s%%</strong>)",
+    "Profile picture" : "პროფილის სურათი",
+    "Upload new" : "ახალი ატვირთვა",
+    "Select from Files" : "აირჩიეთ ფაილებიდან",
+    "Remove image" : "სურათის წაშლა",
+    "png or jpg, max. 20 MB" : "png ან jpg, მაქს. 20 მბ",
+    "Picture provided by original account" : "სურათი ორიგინალი ანგარიშიდან",
     "Cancel" : "უარყოფა",
+    "Choose as profile picture" : "აირჩიეთ პროფილის სურათად",
+    "Full name" : "სრული სახელი",
+    "No display name set" : "დისპლეი სახელი არაა დაყენებული",
     "Email" : "იმეილი",
     "Your email address" : "თქვენი იმეილ მისამართი",
+    "No email address set" : "ელ-ფოსტის მისამართი არაა დაყენებული",
+    "For password reset and notifications" : "პაროლის აღდგენისთვის და შეტყობინებებისთვის",
+    "Phone number" : "ტელეფონის ნომერი",
+    "Your phone number" : "თქვენი ტელეფონის ნომერი",
+    "Address" : "მისამართი",
+    "Your postal address" : "თქვენი საფოსტო მისამართი",
+    "Website" : "ვებ-საიტი",
+    "It can take up to 24 hours before the account is displayed as verified." : "თქვენი ანგარიშის ვერიფიცირებულად გამოჩენამ შეიძლება გასტანოს 24 საათი.",
+    "Link https://…" : "ბმული https://...",
+    "Twitter" : "Twitter-ი",
+    "Twitter handle @…" : "Twitter @…",
+    "You are member of the following groups:" : "თქვენ ხართ შემდეგი ჯგუფების წევრი:",
     "Language" : "ენა",
     "Help translate" : "თარგმნის დახმარება",
     "Password" : "პაროლი",
     "Current password" : "მიმდინარე პაროლი",
     "New password" : "ახალი პაროლი",
     "Change password" : "პაროლის შეცვლა",
+    "Web, desktop and mobile clients currently logged in to your account." : "ვებ, დესკტოპ და მობილური კლიენტები ამჟამად ავტორიზირებული თქვენს ანგარიშზე.",
+    "Device" : "მოწყობილობა",
+    "Last activity" : "ბოლო აქტივობა",
+    "App name" : "აპლიკაციის სახელი",
+    "Create new app password" : "ახალი აპლიკაციის პაროლის შექმნა",
+    "Use the credentials below to configure your app or device." : "ქვემოთ მოცემული უფლებამოსილებანის გამოყენება აპლიკაციისა თუ მოწყობილობისთვის.",
+    "For security reasons this password will only be shown once." : "უსაფრთხოების მიზნით ეს პაროლი გამოჩნდება მხოლოდ ერთხელ.",
     "Username" : "მომხმარებლის სახელი",
+    "Done" : "დასრულებულია",
+    "Developed by the {communityopen}Nextcloud community{linkclose}, the {githubopen}source code{linkclose} is licensed under the {licenseopen}AGPL{linkclose}." : "განავითარა {communityopen}Nextcloud საზოგადოებამ{linkclose}, {githubopen}კოდი{linkclose} is ლიცენზირებულია {licenseopen}AGPL ლიცენზიით{linkclose}.",
+    "Follow us on Google+" : "გამოგვყევით Google+-ზე",
+    "Like our Facebook page" : "მოიწონეთ ჩვენი Facebook გვერდი",
+    "Follow us on Twitter" : "გამოგვყევით Twitter-ზე",
+    "Check out our blog" : "იხილეთ ჩვენი ბლოგი",
+    "Subscribe to our newsletter" : "გამოიწერეთ ჩვენი სიახლეები",
+    "Settings" : "პარამეტრები",
+    "Show storage location" : "საცავის ადგილმდებარეობის ჩვენება",
+    "Show user backend" : "მომხმარებლის ბექენდის ჩვენება",
+    "Show last login" : "ბოლო ავტორიზაციის ჩვენება",
+    "Show email address" : "მოხმარებლის ელ-ფოსტის მისამართის ჩვენება",
+    "Send email to new user" : "გაუგზავნეთ ელ-წერილი ახალ მომხმარებელს",
+    "When the password of a new user is left empty, an activation email with a link to set the password is sent." : "როდესაც ახალი მომხმარებლის პაროლი არაა მითითებული, მომხმარებელს ელ-ფოსტაზე ეგზავნება აქტივაციის წერილი პროლის დაყენების ბმულით.",
+    "E-Mail" : "ელ-ფოსტა",
     "Create" : "შექმნა",
+    "Admin Recovery Password" : "ადმინისტრატორის პაროლის განახლება",
+    "Enter the recovery password in order to recover the users files during password change" : "მოხმარებლების პაროლის შეცვლის შემდეგ მათი ფაილების აღსადგენად შეიყვანეთ აღსადგენი პაროლი",
+    "Everyone" : "ყველა",
+    "Admins" : "ადმინისტრატორები",
+    "Disabled" : "გათიშული",
+    "Default quota" : "საწყისი კვოტა",
+    "Please enter storage quota (ex: \"512 MB\" or \"12 GB\")" : "შეიყვანეთ მოცულობის კვოტა (მაგ.: \"512 მბ\" ან \"12 გბ\")",
     "Unlimited" : "ულიმიტო",
     "Other" : "სხვა",
+    "Group admin for" : "ადმინისტრატორის შეჯგუფება",
     "Quota" : "ქვოტა",
+    "Storage location" : "საცავის ადგილმდებარეობა",
+    "User backend" : "მომხმარებელის ბექენდი",
+    "Last login" : "ბოლო ავტორიზაცია",
+    "change full name" : "სრული სახელის ცვლილება",
     "set new password" : "დააყენეთ ახალი პაროლი",
+    "change email address" : "ელ-ფოსტის მისამართის ცვლილება",
     "Default" : "საწყისი პარამეტრები",
+    "Enabled" : "მოქმედია",
+    "Not enabled" : "არაა მოქმედი",
+    "Please provide an admin recovery password, otherwise all user data will be lost" : "გთხოვთ მოგვაწოდოთ ადმინისტრატორის აღდგენის პაროლი, სხვა შემთხვევაში ყველა მონაცემი დაიკარგება.",
+    "Backend doesn't support password change, but the user's encryption key was successfully updated." : "ბექენდი არ უჭერს მხარს პაროლის ცვილებას, თუმცა მომხმარებლის შიფრაციის გასაღები წარმატებით განახლდა.",
+    "test email settings" : "ელ-ფოსტის პარამეტრების შემოწმება",
     "Invalid request" : "არასწორი მოთხოვნა",
     "Admins can't remove themself from the admin group" : "ადმინისტრატორებს არ შეუძლიათ საკუთარი თავის წაშლა ადმინ ჯგუფიდან",
     "Unable to add user to group %s" : "მომხმარებლის დამატება ვერ მოხეხდა ჯგუფში %s",
     "Unable to remove user from group %s" : "მომხმარებლის წაშლა ვერ მოხეხდა ჯგუფიდან %s",
+    "Sending..." : "იგზავნება...",
+    "_You have %n app update pending_::_You have %n app updates pending_" : ["თქვენ მოლოდინში გაქვთ %n აპლიკაციის განახლება"],
+    "Uninstalling ...." : "წაშლა ...",
+    "Error while uninstalling app" : "აპლიკაციის წაშლისას წარმოიშვა შეცდომა",
+    "Uninstall" : "წაშლა",
     "__language_name__" : "ქართული",
+    "Personal info" : "პირადი ინფორმაცია",
+    "Sessions" : "სესიები",
+    "App passwords" : "აპლიკაციის პაროლები",
+    "Sync clients" : "კლიენტების სინქრონიზაცია",
+    "This is used for sending out notifications." : "ეს გამოიყენება შეტყობინების გადაგზავნისთვის.",
+    "php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "როგორც ჩანს PHP სისტემის გარემოს ცვლადების მიღებისთვის არაა სწორად მოწყობილი. ეს ტესტი getenv(\"PATH\") ით აბრუნებს მხოლოდ ცარიელ პასუხს.",
+    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm." : "გთხოვთ PHP-ის კონფიგურაციის ჩანაწერებისთვის და მისი სერვერზე კონფიგურაციისთვის გადახედოთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">დაყენების დოკუემნტაციას ↗</a>. ეს განსაკუთრებით საჭიროა როდესაც იყენებთ php-fpm-ს.",
+    "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "როგორც ჩანს PHP დაყენებულია ისე, რომ შიდა დოკუმენტური ბლოკები წაშალოს. ეს რამდენიმე მთავარ აპლიკაციას გახდის მიუწვდომელს.",
+    "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s დაყენებულია %2$s-ზე დაბალი ვერსიით, სტაბილურობისთვის და ხარისხიანი მოქმედების მიზნებისთვის რეკომენდირებულია განაახლოთ ახალ %1$s ვერსიამდე.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP მოდული 'fileinfo' არ არსებობს. ჩვენ გირჩევთ რომ აუცილებლად ჩართოთ ეს მოდული, რომ მიიღოთ კარგი შედეგები mime-type–ს აღმოჩენისას.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "ტრაზაქციული ფაილის ჩაკეტვა გათიშულია, ამან შეიძლება გამოიწვიოს გარკვეული პრობლემები. პრობლემებისგან თავის ასარიდებლად აამოქმედეთ 'filelocking.enabled' config.php-ში. დამატებითი ინფორმაციისთვის იხილეთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">დოუმენტაცია ↗</a>.",
+    "This means that there might be problems with certain characters in file names." : "ეს განაპირობებს ფაილის სახელში ზოგ ნიშანთან პრობლემის გამოჩენას.",
+    "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "ერთ-ერთი შემდეგ ლოკალიზაციათაგანის მხარდასაჭერად გთავაზობთ თქვნს სისტემაზე დააყენოთ აუცილებელი პაკეტები: %s.",
+    "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "თუ თქვენი სისტემა იყენებს კრონს და არაა ინსტალაცია არაა დაყენებული დომენის დასაწყისში, შესაძლოა გამოჩნდეს პრობლემები URL გენერაციასთან. ამ პრობლემებისგან თავის ასარიდებლად, \"overwrite.cli.url\" პარამეტრის თქვენს config.php ფაილში მიანიჭერთ ინსტალაციის მისამართი (რეკომენდირებულია: \"%s\")",
+    "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "CLI-ით კრონ საქმის ეგზეკუცია ვერ მოხერხდა. წარმოიშვა შემდეგი ტექნიკური შეცდომები:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "გთხოვთ გადაამოწმოთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">ინსტალაციის სახელმძღვენელოები ↗</a>, და ნახოთ თუ აღმოაჩენთ რაიმე შეცდომას ან გაფრთხილებას <a href=\"%s\">ლოგში</a>.",
     "Cron" : "Cron–ი",
+    "Last cron job execution: %s." : "ბოლო საქმის ეგზეკუცია: %s.",
+    "Last cron job execution: %s. Something seems wrong." : "ბოლო საქმის ეგზეკუცია: %s. რაღაც არასწორია.",
+    "Cron was not executed yet!" : "კრონი ჯერ არ გაშვებულა!",
+    "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php რეგისტრირებულია ვებკრონის სერვისით რომ 15 წუთში ერთხელ http-თი გაიშვას.",
+    "Use system's cron service to call the cron.php file every 15 minutes." : "გამოიყენეთ სისტემის კრონი cron.php ფაილის გასაშვებად ყოველ 15 წუთში.",
+    "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "ამის გასაშვებად საჭიროა გქონდეს PHP posix გაფართოება. მეტი დეტალებისთვის იხილეთ {linkstart}PHP დოკუმენტაცია{linkend}. ",
+    "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "მიეცით მომხმარებლებს ავტოდასრულების უფლება გაზიარების დიალოგებში. იმ შემთხვევაში თუ ეს ფუნქცია არაა მოქმედი, საჭირო იქნება სრული მომხმარებლის სახელის ან ელ-ფოსტის მისამართის შეყვანა.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "სხვა მონაცემთა ბაზის მიგრაციისთვის გამოიყენეთ command line ხელსაწყო: 'occ db:convert-type', ან იხილეთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">დოუმენტაცია ↗</a>.",
+    "Uninstall app" : "აპლიკაციის წაშლა",
+    "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "გამარჯობა,<br><br>მსურს შეგატყობინოთ რომ გაგაჩნიათ %sანგარიში.<br><br>თქვენი მომხმარებლის სახელი: <strong>%s</strong><br>მიიღეთ მასთან წვდომა:<strong><a href=\"%s\">%s</a></strong><br><br>",
+    "Cheers!" : "წარმატებები!",
+    "Hey there,\n\njust letting you know that you now have a %s account.\n\nYour username: %s\nAccess it: %s\n\n" : "გამარჯობა,\n\nმსურს შეგატყობინოთ რომ გაგაჩნიათ %sანგარიში.\n\nთქვენი მომხმარებლის სახელი: %s\nმიიღეთ მასთან წვდომა: %s\n\n",
+    "For password recovery and notifications" : "პაროლის აღდგენისთვის და შეტყობინებებისთვის",
+    "Your website" : "თქვენი ვებ-საიტი",
+    "Your Twitter handle" : "თქვენი Twitter-is @...",
     "Get the apps to sync your files" : "აპლიკაცია ფაილების სინქრონიზაციისთვის",
+    "Desktop client" : "დესკტოპ კლიენტი",
+    "Android app" : "Android აპლიკაცია",
+    "iOS app" : "iOS აპლიკაცია",
+    "If you want to support the project {contributeopen}join development{linkclose} or {contributeopen}spread the word{linkclose}!" : "თუ გსურთ დაეხმაროთ პროექტს {contributeopen}შეუერთდით დეველომენტს{linkclose} ან {contributeopen}გაავრცელეთ სიტყვა{linkclose}!",
     "Show First Run Wizard again" : "მაჩვენე თავიდან გაშვებული ვიზარდი",
-    "Name" : "სახელი"
+    "Passcodes that give an app or device permissions to access your account." : "პასკოდები რომლებიც აძლევენ აპლიკაციებს ან მოწყობილობებს თქვენი ანგარიშით სარგებლობის უფლებას.",
+    "Name" : "სახელი",
+    "Follow us on Google Plus!" : "გამოგვყევით Google Plus-ზე!",
+    "Like our facebook page!" : "მოიწონეთ ჩვენი Facebook გვერდი!",
+    "Subscribe to our twitter channel!" : "გამოიწერეთ ჩვენი twirtter არხი!",
+    "Subscribe to our news feed!" : "გამოიწერეთ ჩვენი სიახლეების ლენტა!",
+    "Subscribe to our newsletter!" : "გამოიწერეთ ჩვენი სიახლეები!",
+    "Show last log in" : "ბოლო ავტორიზაციის ჩვენება",
+    "Group name" : "ჯგუფის სახელი",
+    "You have now an %s account, you can add, protect, and share your data." : "ახლა გაქვთ %s ანგარიში, შეგიძლიათ დაამატოთ, დაიცვათ და გააზიაროთ თქვენი მონაცემები.",
+    "Verifying" : "მოწმდება",
+    "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Ticks section and the documentation for more information." : "თქვენი ნიმუშის უსაფრთხოებისა და გამართული მოქმედებისთვის მნიშვნელოვანია ყველაფერი სწორად იყოს კონფიგურირებული. თქვენს დასახმარებლად ვატარებთ გარკვეულ ავტომატიზირებულ შემოწმებს. გთხოვთ იხილოთ რჩევებისა და ხრიკების სექცია და მეტი ინფორმაციისთვის გადახედოთ დოკუმენტაციას.",
+    "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with MIME type detection." : "PHP მოდული 'fileinfo' არ არსებობს. ჩვენ გირჩევთ რომ აუცილებლად ჩართოთ ეს მოდული, რომ მიიღოთ კარგი შედეგები MIME type–ის აღმოჩენისას.",
+    "Web, desktop, mobile clients and app specific passwords that currently have access to your account." : "ვებ, დესკტოპ, მობილური კლიენტები და აპლიკაცია-სპეციფიური პაროლები რომლებსაც ამჟამად გააჩნიათ წვდომა თქვენს აგარიშზე.",
+    "Here you can generate individual passwords for apps so you don’t have to give out your password. You can revoke them individually too." : "აქ აპლიკაციებისთვის შეგიძლიათ დააგენერიროთ ინდივიდუალური პაროლები, ასე რომ არ დაგჭირდებათ თქვენი პაროლის გამოყენება. ასევე შეგიძლიათ მათი ინდივიდუალურად წაშლაც.",
+    "Follow us on Google+!" : "გამოგვყევით Google+-ზე!",
+    "Follow us on Twitter!" : "გამოგვყევით Twitter-ზე!",
+    "Check out our blog!" : "იხილეთ ჩვენი ბლოგი!"
 },
 "nplurals=1; plural=0;");
diff --git a/settings/l10n/ka_GE.json b/settings/l10n/ka_GE.json
index 85302299208..2ca856d64c3 100644
--- a/settings/l10n/ka_GE.json
+++ b/settings/l10n/ka_GE.json
@@ -1,57 +1,454 @@
 { "translations": {
-    "Authentication error" : "ავთენტიფიკაციის შეცდომა",
-    "Email saved" : "იმეილი შენახულია",
-    "Couldn't update app." : "ვერ მოხერხდა აპლიკაციის განახლება.",
-    "Email sent" : "იმეილი გაიგზავნა",
+    "{actor} changed your password" : "{actor}-მა შეცვალა თქვენი პაროლი",
+    "You changed your password" : "თქვენ შეცვალეთ თქვენი პაროლი",
+    "Your password was reset by an administrator" : "თქვენი პაროლი ადმინისტრატორმა აღადგინა",
+    "{actor} changed your email address" : "{actor}-მა შეცვალა თქვენი ელ-ფოსტის მისამართი",
+    "You changed your email address" : "თქვენ შეცვალეთ თქვენი ელ-ფოსტის მისამართი",
+    "Your email address was changed by an administrator" : "თქვენი ელ-ფოსტის მისამართი ადმინისტრატორის მიერ შეიცვალა",
+    "Security" : "უსაფრთხოება",
+    "You successfully logged in using two-factor authentication (%1$s)" : "თქვენ ორ-ფაქტორიანი აუტენტიფიკაციით წარმატებით გაიარეთ ავტორიზაცია (%1$s)",
+    "A login attempt using two-factor authentication failed (%1$s)" : "ავტორიზაცია ორ-ფაქტორიანი აუტენტიფიკაციით ვერ მოხერხდა (%1$s)",
+    "Your <strong>password</strong> or <strong>email</strong> was modified" : "<strong>თქვენი პაროლი</strong> ან <strong>ელ-ფოსტის მისამართი</strong> შეიცვალა",
+    "Your apps" : "თქვენი აპლიკაციები",
+    "Updates" : "განახლებები",
+    "Enabled apps" : "მოქმედი აპლიკაციები",
+    "Disabled apps" : "არამოქმედი აპლიკაციები",
+    "App bundles" : "აპლიკაციების შეკვრები",
+    "Wrong password" : "არასწორი პაროლი",
+    "Saved" : "დამახსოვრდა",
+    "No user supplied" : "მომხმარებელი არ იქნა მოწოდებული",
+    "Unable to change password" : "პაროლის ცვილება შეუძლებელია",
+    "Authentication error" : "აუტენტიფიკაციის შეცდომა",
+    "Please provide an admin recovery password; otherwise, all user data will be lost." : "გთხოვთ მოგვაწოდოთ ადმინისტრატორის აღდგენის პაროლი; სხვა შემთხვევაში ყველა მონაცემი დაიკარგება.",
+    "Wrong admin recovery password. Please check the password and try again." : "არასწორი ადმინისტრატორის აღდგენის პაროლი. გთხოვთ გადაამოწმოთ პაროლი და სცადოთ ახლიდან.",
+    "Backend doesn't support password change, but the user's encryption key was updated." : "ბექენდს არ აქვს პაროლის ცვლილების მხარდაჭერა, თუმცა მომხმარებლის შიფრაციის გასახები განახლდა.",
+    "installing and updating apps via the app store or Federated Cloud Sharing" : "აპლიკაციების app store-იდან დაყენება და განახლება ან ფედერალიზირებული ქლაუდ გაზიარება",
+    "Federated Cloud Sharing" : "ფერერალიზირებული ქლაუდ გაზიარება",
+    "cURL is using an outdated %s version (%s). Please update your operating system or features such as %s will not work reliably." : "cURL მოძველებულია %s ვერსია (%s). გთხოვთ განაახლოთ თქვენი ოპერაციული სისტემა ან ისეთი ფუნქციები როგორებიცაა %s კარგად არ იმუშავებენ.",
+    "A problem occurred, please check your log files (Error: %s)" : "წარმოიშვა შეცდომა, გთხოვთ იხილოთ თქვენი ლოგ ფაილები (შეცდომა: %s)",
+    "Migration Completed" : "მიგრაცია დასრულდა",
+    "Group already exists." : "ჯგუფი უკვე არსებობს.",
+    "Unable to add group." : "ჯგუფის დამატება ვერ ხორციელდება.",
+    "Unable to delete group." : "ჯგუფის წაშლა ვერ ხორციელდება.",
+    "Invalid SMTP password." : "არასწორი SMTP პაროლი.",
+    "Email setting test" : "ელ-ფოსტის დაყენების შემოწმება",
+    "Well done, %s!" : "ყველაფერი კარგადაა, %s!",
+    "If you received this email, the email configuration seems to be correct." : "იმ შემთხვევაში თუ მიიღეთ ეს ელ-წერილი, ელ-ფოსტის კონფიგურაცია კარგად უნდა იყოს.",
+    "Email could not be sent. Check your mail server log" : "ელ-წერილი ვერ იგზავნება. გთხოვთ შეამოწმოთ მეილ-სერვერის ლოგი",
+    "A problem occurred while sending the email. Please revise your settings. (Error: %s)" : "ელ-წერილის გაგზავნისას წარმოიშვა შეცდომა. გთხოვთ გადახედოთ თქვენს პარამეტრებს. (შეცდომა: %s)",
+    "You need to set your user email before being able to send test emails." : "სატესტო წერილების გაგზავნამდე უნდა დააყენოთ თქვენი მომხმარებლის ელ-ფოსტა.",
+    "Invalid mail address" : "არასწორი საფოსტო მისამართი",
+    "No valid group selected" : "სწორი ჯგუფი არაა არჩეული",
+    "A user with that name already exists." : "მომხმარებელი ამ სახელით უკვე არსებობს.",
+    "To send a password link to the user an email address is required." : "პაროლის ბმულის მომხმარებელთან გასაგზავნად აუცილებელია ელ-ფოსტის მისამართი.",
+    "Unable to create user." : "მომხმარებლის შექმნა ვერ ხერხდება.",
+    "Unable to delete user." : "მომხმარებლის გაუქმება ვერ ხერხდება.",
+    "Error while enabling user." : "მომხმარებლის გააქტიურება ვერ ხერხდება.",
+    "Error while disabling user." : "მომხმარებლის დეაქტივაცია ვერ ხერხდება.",
+    "In order to verify your Twitter account, post the following tweet on Twitter (please make sure to post it without any line breaks):" : "თქვენი Twitter-ის ანგარიშის დასამოწმებლად, Twitter-ზე დაპოსტეთ შემდეგი (მიაქციათ ყურადღება რომ პოსტავთ ხაზის წყვეტების გარეშე): ",
+    "In order to verify your Website, store the following content in your web-root at '.well-known/CloudIdVerificationCode.txt' (please make sure that the complete text is in one line):" : "თქვენი საიტის დასამოწმებლად, შემდეგი მოცულობა მოათავსეთ web-root-ში '.well-known/CloudIdVerificationCode.txt' ადგილას (დარწმუნდით რომ მთელი ტექსტი ერთ ხაზზეა): ",
+    "Settings saved" : "პარამეტრები შენახულია",
+    "Unable to change full name" : "სრული სახელის ცვლილება ვერ ხერხდება",
+    "Unable to change email address" : "ელ-ფოსტის მისამართი ვერ იცვლება",
+    "Your full name has been changed." : "თქვენი სრული სახელი შეიცვალა.",
+    "Forbidden" : "აკრძალულია",
+    "Invalid user" : "არასწორი მომხმარებელი",
+    "Unable to change mail address" : "ელ-ფოსტის მისამართის შეცვლა ვერ ხერხდება",
+    "Email saved" : "ელ-ფოსტის მისამართი შენახულია",
+    "%1$s changed your password on %2$s." : "%1$s-მა თქვენი პაროლი შეცვალა %2$s-ზე.",
+    "Your password on %s was changed." : "თქვენი პაროლი %s-ზე შეიცვალა.",
+    "Your password on %s was reset by an administrator." : "თქვენი პაროლი %s-ზე ადმინისტრატორმა აღადგინა.",
+    "Password for %1$s changed on %2$s" : "პაროლი %1$s-სთვის შეიცვალა %2$s-ზე",
+    "Password changed for %s" : "პაროლი %s-სთვის შეიცვალა",
+    "If you did not request this, please contact an administrator." : "თუ ეს არ მოგითხოვიათ, მიმართეთ ადმინისტრატორს",
+    "%1$s changed your email address on %2$s." : "%1$s-მა შეცვალა თქვენი ელ-ფოსტის მისამართი %2$s-ზე.",
+    "Your email address on %s was changed." : "თქვენი ელ-ფოსტის მისამართი %s-ზე შეიცვალა.",
+    "Your email address on %s was changed by an administrator." : "თქვენი ელ-ფოსტის მისამართი %s-ზე ადმინისტრატორმა შეცვალა.",
+    "Email address for %1$s changed on %2$s" : "ელ-ფოსტის მისამართი %1$s-სთვის შეიცვალა %2$s-ზე",
+    "Email address changed for %s" : "ელ-ფოსტის მისამართი %s-სთვის შეიცვალა",
+    "The new email address is %s" : "ახალი ელ-ფოსტის მისამართია %s",
+    "Your %s account was created" : "თქვენი %s ანგარიში შექმნილია",
+    "Welcome aboard" : "კეთილი იყოს თქვენი ბორტზე მობრძანება",
+    "Welcome aboard %s" : "%s, კეთილი იყოს თქვენი ბორტზე მობრძანება",
+    "You now have an %s account, you can add, protect, and share your data." : "ახლა გაქვთ %s ანგარიში, შეგიძლიათ დაამატოთ, დაიცვათ და გააზიაროთ თქვენი მონაცემები.",
+    "Your username is: %s" : "თქვენი მომხმარებლის სახელია: %s",
+    "Set your password" : "დააყენეთ თქვენი პაროლი",
+    "Go to %s" : "გადადით %s-ზე",
+    "Install Client" : "დააყენეთ კლიენტი",
+    "Password confirmation is required" : "საჭიროა პაროლის დამოწმება",
+    "Couldn't remove app." : "აპლიკაციის წაშლა ვერ მოხერხდა.",
+    "Couldn't update app." : "აპლიკაციის განახლება ვერ მოხერხდა.",
+    "Are you really sure you want add {domain} as trusted domain?" : "დამდვილად გსურთ {domain}-ის დამატება სანდო დომენად?",
+    "Add trusted domain" : "სანდო დომენის დამატება",
+    "Migration in progress. Please wait until the migration is finished" : "მიმდინარეობს მიგრაცია. გთხოვთ დაელოდოთ მიგრაციის დასრულებას",
+    "Migration started …" : "მიგრაცია დაიწყო ...",
+    "Not saved" : "არაა შენახული",
+    "Sending…" : "იგზავნება...",
+    "Email sent" : "ელ-წერილი გაიგზავნა",
+    "Official" : "ოფიციალური",
     "All" : "ყველა",
+    "Update to %s" : "განახლდეს %s-ზე",
+    "No apps found for your version" : "აპლიკაციები თქვენი ვერსიისთვის ვერ იქნა ნაპოვნი",
+    "The app will be downloaded from the app store" : "აპლიკაცია გადმოწერილ იქნება app store-იდან",
+    "Official apps are developed by and within the community. They offer central functionality and are ready for production use." : "ოფიციალური აპლიკაციები განვითარებულია და მოქცეულია ჩვენს საზოგადოებაში. ისინი გთავაზობენ ცენტრალურ ფუნქციონირებას და საწარმოო გამოყენებისათვის მზადყოფნაში არიან.",
+    "Approved apps are developed by trusted developers and have passed a cursory security check. They are actively maintained in an open code repository and their maintainers deem them to be stable for casual to normal use." : "დამოწმებული აპლიკაციები განვითარებულია სანდო დეველოპერების მიერ, მათ გავლილი აქვთ მრავალი უსაფრთხოების ტესტი. ისინი აქტიურად ნარჩუნდებიან ღია კოდის საცავში და მათ შემნარჩუნებლებს მიაჩნიათ რომ ისინი სტაბულარად მუშაობენ.",
+    "This app is not checked for security issues and is new or known to be unstable. Install at your own risk." : "აპლიკაცია არაა შემოწმებული უსაფრთხოების პრობელემბზე და ახალია, ან ცნობილია რომ არაა სტაბილური. დააყენეთ თქვენი რისკით.",
+    "Disabling app …" : "აპლიკაციის დეაქტივაცია ...",
+    "Error while disabling app" : "აპლიკაციის დეაქტივაციისას წარმოიქმნა შეცდომა",
     "Disable" : "გამორთვა",
     "Enable" : "ჩართვა",
+    "Enabling app …" : "აპლიკაციის ამოქმედება ...",
+    "Error while enabling app" : "აპლიკაციის ამოქმედებისას წარმოიქმნა შეცდომა",
+    "Error: This app can not be enabled because it makes the server unstable" : "შეცდომა: ეს აპლიკაცია ვერ მოქმედდება რადგანაც სერვერს ხდის არასტაბილურს",
+    "Error: Could not disable broken app" : "შეცდომა: გაფუჭებული აპლიკაციის დეაქტივაცია ვერ მოხერხდა",
+    "Error while disabling broken app" : "გაფუჭებული აპლიკაციის დეაქტივაციისას წარმოიშვა შეცდომა",
+    "No app updates available" : "აპლიაკციების განახლებები არაა ხელმისაწვდომი",
     "Updating...." : "მიმდინარეობს განახლება....",
     "Error while updating app" : "შეცდომა აპლიკაციის განახლების დროს",
     "Updated" : "განახლებულია",
+    "Removing …" : "იშელბა ...",
+    "Error while removing app" : "აპლიკაციის წაშლისას წარმოიშვა შეცდომა",
+    "Remove" : "წაშლა",
+    "The app has been enabled but needs to be updated. You will be redirected to the update page in 5 seconds." : "აპლიკაცია ამოქმედდა თუმცა საჭიროებს განახლებას. 5 წამში გადამისამართდებით განახლების გვერდზე.",
+    "App update" : "აპლიკაციის განახლება",
+    "Approved" : "დამოწმებულია",
+    "Experimental" : "ექსპერიმენტალურია",
+    "No apps found for {query}" : "აპლიკაციები {query}-სთივ ვერ მოძებნა",
+    "Enable all" : "ყველას ამოქმედება",
+    "Allow filesystem access" : "ფაილს-სისტემაზე წვდომის მინიჭება",
+    "Disconnect" : "კავშირის გაწყვეტა",
+    "Revoke" : "წვდომის გაუქმება",
+    "Internet Explorer" : "Internet Explorer-ი",
+    "Edge" : "Edge-ი",
+    "Firefox" : "Firefox-ი",
+    "Google Chrome" : "Google Chrome-ი",
+    "Safari" : "Safari",
+    "Google Chrome for Android" : "Google Chrome Android-ისთვის",
+    "iPhone iOS" : "iPhone iOS",
+    "iPad iOS" : "iPad iOS",
+    "iOS Client" : "iOS კლიენტი",
+    "Android Client" : "Android კლიენტი",
+    "Sync client - {os}" : "სინქ. კლიენტი - {os}",
+    "This session" : "ეს სესია",
+    "Copy" : "კოპირება",
+    "Copied!" : "კოპირებულია",
+    "Not supported!" : "არაა მხარდაჭერილი!",
+    "Press ⌘-C to copy." : "კოპირებისთვის დააჭირეთ ⌘-C-ს.",
+    "Press Ctrl-C to copy." : "კოპირებისთვის დააჭირეთ Ctrl-C-ს.",
+    "Error while loading browser sessions and device tokens" : "ბრაუზერის სესიების და მოწყობილობების ტოკენების ჩატვირთვისას წარმოიშვა შეცდომა",
+    "Error while creating device token" : "მოწყობილობის ტოკენის ჩატვირთვისას წარმოიქმნა შეცდომა",
+    "Error while deleting the token" : "ტოკენის წაშლისას წარმოიქმნა შეცდომა",
+    "An error occurred. Please upload an ASCII-encoded PEM certificate." : "წარმოიქმნა შეცდომა. გთხოვთ ატვირთოთ ASCII-თ კოდირებული PEM სერტიფიკატი.",
+    "Valid until {date}" : "ვარგისია {date}-მდე",
     "Delete" : "წაშლა",
+    "Local" : "ლოკალური",
+    "Private" : "პირადი",
+    "Only visible to local users" : "გამოჩნდება მხოლოდ ლოკალურ მომხმარებლებთან",
+    "Only visible to you" : "გამოჩნდება მხოლოდ თქვენთან",
+    "Contacts" : "კონტაქტები",
+    "Visible to local users and to trusted servers" : "გამოჩნდება ლოკალურ მომხმარებლებთან და სანდო სერვერებთან",
+    "Public" : "ღია",
+    "Will be synced to a global and public address book" : "სინქრონიზაცია მოხდება გლობალურ და ღია მისამართების წიგნში",
+    "Verify" : "დამოწმება",
+    "Verifying …" : "მოწმდება ...",
+    "An error occured while changing your language. Please reload the page and try again." : "თქვენი ენის ცვლილებისას წარმოიქმნა შეცდომა. გთხოვთ განაახლოთ გვერდი და სცადოთ ახლიდან.",
+    "Select a profile picture" : "აირჩიეთ პროფილის სურათი",
+    "Very weak password" : "ძალიან სუსტი პაროლი",
+    "Weak password" : "სუსტი პაროლი",
+    "So-so password" : "ნორმალური პაროლი",
+    "Good password" : "კარგი პაროლი",
+    "Strong password" : "ძლიერი პაროლ",
     "Groups" : "ჯგუფები",
+    "Unable to delete {objName}" : "{objName}-ის წაშლა ვერ ხერხდება",
+    "Error creating group: {message}" : "ჯგუფის შექმნისას წარმოიშვა შეცდომა: {message}",
+    "A valid group name must be provided" : "წარმოჩენილ უნდა იყოს სწორი ჯგუფის სახელი",
+    "deleted {groupName}" : "{groupName} წაიშალა",
     "undo" : "დაბრუნება",
+    "{size} used" : "მოხმარებულია {size}",
     "never" : "არასდროს",
+    "deleted {userName}" : "{userName} გაუქმდა",
+    "No user found for <strong>{pattern}</strong>" : "<strong>{pattern}</strong>-ისთვის მომხმარებელი ვერ იქნა ნაპოვნი",
+    "Unable to add user to group {group}" : "მოხმარებლის ჯგუფში {group} დამატება ვერ ხერხდება",
+    "Unable to remove user from group {group}" : "მომხმარებლის ამოშლა ჯგუფიდან {group} ვერ ხერხდება",
+    "Add group" : "ჯგუფის დამატება",
+    "Invalid quota value \"{val}\"" : "კვოტის არასწორი მნიშნველობა \"{val}\"",
+    "no group" : "ჯგუფი არაა",
+    "Password successfully changed" : "პაროლი წარმატებით შეიცვალა",
+    "Changing the password will result in data loss, because data recovery is not available for this user" : "პაროლის შეცვლა გამოიწვევს მონაცემების დაკარგვას, რადგან მონაცემების აღდგენა ამ მომხმარებლისთვის არაა მოქმედი",
+    "Could not change the users email" : "მომხმარებლის ელ-ფოსტის მისამრთი ვერ შეიცვალა",
+    "Error while changing status of {user}" : "{user}-ის სტატუსის შეცვლისას წარმოიშვა შეცდომა",
     "A valid username must be provided" : "უნდა მიუთითოთ არსებული მომხმარებლის სახელი",
+    "Error creating user: {message}" : "მომხმარებლის შექმნისას წარმოიშვა შეცდომა: {message}",
     "A valid password must be provided" : "უნდა მიუთითოთ არსებული პაროლი",
+    "A valid email must be provided" : "უნდა მიუთითოთ სწორი ელ-ფოსტის მისამართი",
+    "Developer documentation" : "დეველოპერის დოკუმენტაცია",
+    "View in store" : "იხილეთ store-ში",
+    "Limit to groups" : "ლიმიტი ჯგუფებზე",
+    "by %s" : "%s-ს მიერ",
+    "%s-licensed" : "%s-ლიცენზირებული",
+    "Documentation:" : "დოკუმენტაცია",
+    "User documentation" : "მომხმარებლის დოკუმენტაცია",
+    "Admin documentation" : "ადმინისტრატორის დოკუმენტაცია",
+    "Visit website" : "საიტზე სტუმრობა",
+    "Report a bug" : "განაცხადეთ შეცდომის შესახებ",
+    "Show description …" : "აღწერილობის ჩვენება ...",
+    "Hide description …" : "არჭერილობის დამალვა ...",
+    "This app has an update available." : "აპლიკაციას გააჩნია ხელმისაწვდომი განახლება.",
+    "This app has no minimum Nextcloud version assigned. This will be an error in the future." : "ეს აპლიკაცია არ საზღვრავს Nextcloud-ის მინიმალურ ვერსიას. სამომავლოდ ეს ჩაითვლება შეცდომად.",
+    "This app has no maximum Nextcloud version assigned. This will be an error in the future." : "ეს აპლიკაცია არ საზღვრავს Nextcloud-ის მაქსიმალურ ვერსიას. სამომავლოდ ეს ჩაითვლება შეცდომად.",
+    "This app cannot be installed because the following dependencies are not fulfilled:" : "ეს აპლიკაცია ვერ დაყენდა რადგან შემდეგი დამოკიდებულებები არაა დაკმაყოფილებული:",
+    "Enable only for specific groups" : "ამოქმედება მხოლოდ სპეციფიური ჯგუფებისათვის",
+    "SSL Root Certificates" : "SSL Root სერტიფიკატები",
+    "Common Name" : "საზოგადო სახელი",
+    "Valid until" : "ვარგისია",
+    "Issued By" : "განაცხადა",
+    "Valid until %s" : "ვარგისია %s-მდე",
+    "Import root certificate" : "root სერტიფიკატის იმპორტი",
+    "Administrator documentation" : "ადმინისტრატორის დოკუმენტაცია",
+    "Online documentation" : "ონლაინ დოკუმენტაცია",
     "Forum" : "ფორუმი",
-    "None" : "არა",
+    "Getting help" : "დახმარების მიღება",
+    "Commercial support" : "კომერციული მხარდაჭერა",
+    "None" : "არც ერთი",
     "Login" : "ლოგინი",
-    "Encryption" : "ენკრიპცია",
+    "Plain" : "ჩვეულებრივი",
+    "NT LAN Manager" : "NT LAN მენეჯერი",
+    "SSL/TLS" : "SSL/TLS",
+    "STARTTLS" : "STARTTLS",
+    "Email server" : "საფოსტო სერვერი",
+    "Open documentation" : "ღია დოკუმენტაცია",
+    "It is important to set up this server to be able to send emails, like for password reset and notifications." : "ამ სერვერის მოწყობა ელ-წერილების გასაგზვნად მნიშვნელოვანია, მაგ. პაროლის აღსადგენად და შეტყობინებების მისაღებად.",
+    "Send mode" : "გაგზავნის რეჟიმი",
+    "Encryption" : "შიფრაცია",
+    "From address" : "მისამართიდან",
+    "mail" : "წერილი",
+    "Authentication method" : "აუტენტიფიკაციის მეთოდი",
+    "Authentication required" : "აუტენტიფიკაცია საჭიროებს",
     "Server address" : "სერვერის მისამართი",
     "Port" : "პორტი",
-    "Credentials" : "იუზერ/პაროლი",
+    "Credentials" : "უფლებამოსილებანი",
+    "SMTP Username" : "SMTP მოხმარებლის სახელი",
+    "SMTP Password" : "SMTP მომხმარებლის პაროლი",
+    "Store credentials" : "უფლებამოსილებანის შენახვა",
+    "Test email settings" : "ელ-ფოსტის პარამეტრების შემომება",
+    "Send email" : "ელ-წერილის გაგზავნა",
+    "Server-side encryption" : "სერვერული-მხარის შიფრაცია",
+    "Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "სერვერული-მხარის შიფრაცია იძლევა სერვერზე ატვირთული ფაილების შიფრაციის საშუალებას. ეს ფუნქცია ლიმიტს აწესებს მოქმედებაზე, ასე რომ გააქტიურედ მხოლოდ აუცილებლობისას.",
+    "Enable server-side encryption" : "სერვერული-მხარის შიფრაციის ამოქმედება",
+    "Please read carefully before activating server-side encryption: " : "სანამ გააქტიურებთ სერვერული-მხარის შიფრაციას გთხოვთ ყურადღებით გაეცნოთ:",
+    "Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "შიფრაციის ჩართვის შემდეგ, სერვერზე ატვირთული ყველა ფაილი დაიშიფრება. იმ შემთხვევაში თუ აქტიური შიფრაციის მოდულს აქვს შიფრაციის დეაქტივაციის უნარი და ყველა წინაპირობა დაცულია (მაგ.: აღდგენის გასაღების დაყენება), სხვა დროს შეძლებთ მისი მოქმედების შეჩერებას.",
+    "Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "მხოლოდ შიფრაცია არ იძლევა სისტემის უსაფრთხოების გარანტიას. მეტი ინფორმაციისთვის იმაზე თუ როგორ მუშაობს შიფრაციის აპლიკაცია იხილეთ დოკუემენტაცია და გაეცანით მოხმარების შემთხვევებს.",
+    "Be aware that encryption always increases the file size." : "იცოდეთ, შიფრაცია ყოველთვის ზრდის ფაილის ზომას.",
+    "It is always good to create regular backups of your data, in case of encryption make sure to backup the encryption keys along with your data." : "ყოველთვის კარგია თქვენი მონაცემების დაზღვევა, შიფრაციის შემთხვევაში თვენს მონაცემებთან ერთად აუცილებლად დააზღვიეთ შიფრაციის გასაღებებიც.",
+    "This is the final warning: Do you really want to enable encryption?" : "ეს ბოლო გაფრთხილებაა: ნამდვილად გსურთ შიფრაციის ამოქმედება?",
+    "Enable encryption" : "შიფრაციის ამოქმედება",
+    "No encryption module loaded, please enable an encryption module in the app menu." : "შიფრაციის მოდული არაა ჩატვირთული, გთხოვთ აამოქმედოთ ის აპლიკაციის მენიუდან. ",
+    "Select default encryption module:" : "აირჩიეთ შიფრაციის საწყისი მოდული:",
+    "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'" : "საჭიროა შიფრაციის გასაღებების მიგრაცია (ownCloud <= 8.0) ახალებზე. გთხოვთ აამოქმედოთ \"საწყისი მიგრაციის მოდუი\" და გაუშვათ 'occ encryption:migrate'",
+    "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one." : "საჭიროა შიფრაციის ძველი გასაღებების მიგრაცია (ownCloud <= 8.0) ახალებზე.",
+    "Start migration" : "მიგრაციის დაწყება",
+    "Security & setup warnings" : "უსაფრთხოების და მოწყობის გაფრთხილებები",
+    "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "თქვენი ნიმუშის უსაფრთხოებისა და გამართული მოქმედებისთვის მნიშვნელოვანია ყველაფერი სწორად იყოს კონფიგურირებული. თქვენს დასახმარებლად ვატარებთ გარკვეულ ავტომატიზირებულ შემოწმებს. გთხოვთ იხილოთ რჩევებისა და ხრიკების სექცია და მეტი ინფორმაციისთვის გადახედოთ დოკუმენტაციას.",
+    "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "როგორც ჩანს PHP სისტემის გარემოს ცვლადების მიღებისთვის არაა სწორად მოწყობილი. ეს ტესტი getenv(\"PATH\") ით აბრუნებს მხოლოდ ცარიელ პასუხს.",
+    "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "მხოლოდ კითხვადი კონფიუგაცია ამოქმედდა. ეს აჩერებს ვებ-ინტერფეისის მეშვეობით გარკვეული კონფიგურაციების შეცვლას. ამასთან ერთად ფაილი მოითხოვს განახლების ყოველ ეტაპზე გახდეს წერადი.",
+    "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "როგორც ჩანს PHP დაყენებულია ისე, რომ შიდა დოკუმენტური ბლოკები წაშალოს. ეს რამდენიმე მთავარ აპლიკაციას გახდის მიუწვდომელს.",
+    "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "ეს შესაძლოა გამოწვეული იყოს ისეთი კეშით/აქსელერატორით როგორიცაა Zend OPcache ან eAccelerator.",
+    "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "თქვენი მონაცემთა ბაზა არ მოქმედებს \"READ COMMITTED\" ტრანზაქციის იზოლაციის დონით. ამან შეიძლება გამოიწვიოს პრობლემა, როდესაც მრავალი ქმედება შესრულდება პარალელურად.",
+    "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s დაყენებულია %2$s-ზე დაბალი ვერსიით, სტაბილურობისთვის და ხარისხიანი მოქმედების მიზნებისთვის რეკომენდირებულია განაახლოთ ახალ %1$s ვერსიამდე.",
+    "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP მოდული 'fileinfo' არ არსებობს. ჩვენ გირჩევთ რომ აუცილებლად ჩართოთ ეს მოდული, რომ მიიღოთ კარგი შედეგები MIME ტიპის აღმოჩენისას.",
+    "System locale can not be set to a one which supports UTF-8." : "სისტემური ლოკალიზაცია ვერ ყენდება იმაზე რომელიც მხარს უჭერს UTF-8-ს.",
+    "This means that there might be problems with certain characters in filenames." : "ეს განაპირობებს ფაილის სახელში ზოგ ნიშანთან პრობლემის გამოჩენას.",
+    "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "ერთ-ერთი შემდეგ ლოკალიზაციათაგანის მხარდასაჭერად გთავაზობთ თქვნს სისტემაზე დააყენოთ აუცილებელი პაკეტები: %s.",
+    "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "თუ თქვენი სისტემა იყენებს კრონს და არაა ინსტალაცია არაა დაყენებული დომენის დასაწყისში, შესაძლოა გამოჩნდეს პრობლემები URL გენერაციასთან. ამ პრობლემებისგან თავის ასარიდებლად, \"overwrite.cli.url\" პარამეტრის თქვენს config.php ფაილში მიანიჭერთ ინსტალაციის მისამართი (რეკომენდირებულია: \"%s\")",
+    "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "CLI-ით კრონ საქმის ეგზეკუცია ვერ მოხერხდა. წარმოიშვა შემდეგი ტექნიკური შეცდომები:",
+    "All checks passed." : "ყველა შემოწმებამ ჩაიარა დადებითად.",
+    "Background jobs" : "ფონური საქმეები",
+    "Last job ran %s." : "ბოლო საქმის გაშვება - %s.",
+    "Last job execution ran %s. Something seems wrong." : "ბოლო საქმე გაიშვა %s. რაღაც არასწორია.",
+    "Background job didn’t run yet!" : "ფონური საქმე ჯერ არ გაშვებულა!",
+    "For optimal performance it's important to configure background jobs correctly. For bigger instances 'Cron' is the recommended setting. Please see the documentation for more information." : "ოპტიმალური მოღვაწეობისთვის მნიშვნელოვანია ფონური საქმეების სწორი კონფიგურაცია. დიდი ნიმუშებისთვის 'კრონი' რეკომენდირებული არჩევანია. გთხოვთ მეტი ინფორმაციისთვის იხილოთ დოკუმენტაცია.",
     "Execute one task with each page loaded" : "გაუშვი თითო მოქმედება ყველა ჩატვირთულ გვერდზე",
+    "cron.php is registered at a webcron service to call cron.php every 15 minutes over HTTP." : "cron.php რეგისტრირებულია ვებკრონის სერვისით რომ 15 წუთში ერთხელ HTTP-თი გაიშვას.",
+    "Use system cron service to call the cron.php file every 15 minutes." : "გამოიყენეთ სისტემის კრონი cron.php ფაილის გასაშვებად ყოველ 15 წუთში.",
+    "The cron.php needs to be executed by the system user \"%s\"." : "cron.php უნდა გაუშვას სისტემურმა მოხმარებელმა \"%s\".",
+    "To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "ამის გასაშვებად საჭიროა გქონდეს PHP POSIX გაფართოება. მეტი დეტალებისთვის იხილეთ {linkstart}PHP დოკუმენტაცია{linkend}. ",
     "Version" : "ვერსია",
     "Sharing" : "გაზიარება",
+    "As admin you can fine-tune the sharing behavior. Please see the documentation for more information." : "როგორც ადმინისტრატორს შეგიძლიათ გაზიარების ქცევის კორექტირება. დამატებითი ინფორმაციისთვის იხილეთ დოკუმენტაცია.",
     "Allow apps to use the Share API" : "დაუშვი აპლიკაციების უფლება  Share API –ზე",
+    "Allow users to share via link" : "მიეცით მოხმარებლებს ბმულით გაზიარების უფლება",
+    "Allow public uploads" : "საქვეყნო ატვირთების დაშვება",
+    "Always ask for a password" : "ყოველთვის მოხდეს პაროლის მოთხოვნა",
+    "Enforce password protection" : "პროლით დაცვის იძულება",
+    "Set default expiration date" : "დააყენეთ საწყისი ვადის ამოწურვის თარიღი",
+    "Expire after " : "ვადის ამოწურვა",
+    "days" : "დღე",
+    "Enforce expiration date" : "ვადის ამოწურვის თარიღის იძულება",
     "Allow resharing" : "გადაზიარების დაშვება",
+    "Allow sharing with groups" : "ჯგუფებთან გაზიარების მხარდაჭერა",
+    "Restrict users to only share with users in their groups" : "შეზღუდეთ მომხმარებლები გააზიარონ მომხმარებლებთან რომლებიც მიეკუთვნებიან მათ ჯგუფებს",
+    "Exclude groups from sharing" : "აკრძალეთ ჯგუფების გაზიარება",
+    "These groups will still be able to receive shares, but not to initiate them." : "ეს ჯგუფები ისევ მიიღებენ გაზიარებებს, მაგრამ ვერ წამოიწყებენ მათ.",
+    "Allow username autocompletion in share dialog. If this is disabled the full username or email address needs to be entered." : "მიეცით მომხმარებლებს ავტოდასრულების უფლება გაზიარების დიალოგებში. იმ შემთხვევაში თუ ეს ფუნქცია არაა მოქმედი, საჭირო იქნება სრული მომხმარებლის სახელის ან ელ-ფოსტის მისამართის შეყვანა.",
+    "Show disclaimer text on the public link upload page. (Only shown when the file list is hidden.)" : "პასუხისმგებლობის შეზღუდვის ტექსტის ჩვენება ღია ბმულის ატვირთვის გვერდზე. (ჩანს მხოლოდ მაშინ, როდესაც ფაილების სია დამალულია.)",
+    "This text will be shown on the public link upload page when the file list is hidden." : "ეს ტექსტი გამოჩნდება ღია ბმულის ატვირთვის გვერდზე, როდესაც ფაილების სია დამალულია.",
+    "Tips & tricks" : "რცევები და ხრიკები",
+    "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "ამ ნიმუშის ოპტიმიზირებულად მოწყობისა და გამოყენებისთვის მრავალი ფუნქცია და კონფიგურაციის პარამეტრია ხელმისაწვდომი. აქ რამდენიმე კურსორია მეტი ინფორმაციისთვის.",
+    "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "ამჟამად ბექენდზე მონაცემთა ბაზად მოიხმარება SQLite. უფრო დიდი ინსტალაციებისთვის რეკომენდაციას გიწევთ აირჩიოთ სხვა მონაცემთა ბაზა.",
+    "This is particularly recommended when using the desktop client for file synchronisation." : "ეს კერძოდ რეკომედირებულია განსაკუთრებით მაშინ, როდესაც ფაილების სინქრონიზაციისთვის იყენებთ დესკტოპ-კლიენტს.",
+    "How to do backups" : "როგორ შევქმნათ რეზერვები",
+    "Advanced monitoring" : "პროგრესიული მონიტორინგი",
+    "Performance tuning" : "მოქმედების რეგულირება",
+    "Improving the config.php" : "config.php-ს გაუმჯობესება",
+    "Theming" : "ვიზუალური თემები",
+    "Check the security of your Nextcloud over our security scan" : "შეამოწმეთ თქვენი Nextcloud ჩვენი უსფრთხოების შემოწმებით",
+    "Hardening and security guidance" : "განმტკიცებისა და უსაფრთხოების სახელმძღვანელო",
+    "Personal" : "პირადი",
+    "Administration" : "ადმინისტრაცია",
+    "You are using <strong>%s</strong> of <strong>%s</strong>" : "თქვენ იყენებთ <strong>%s</strong> სულ <strong>%s</strong>-დან",
+    "You are using <strong>%s</strong> of <strong>%s</strong> (<strong>%s %%</strong>)" : "თქვენ იყენებთ <strong>%s</strong> სულ <strong>%s</strong>-დან (<strong>%s%%</strong>)",
+    "Profile picture" : "პროფილის სურათი",
+    "Upload new" : "ახალი ატვირთვა",
+    "Select from Files" : "აირჩიეთ ფაილებიდან",
+    "Remove image" : "სურათის წაშლა",
+    "png or jpg, max. 20 MB" : "png ან jpg, მაქს. 20 მბ",
+    "Picture provided by original account" : "სურათი ორიგინალი ანგარიშიდან",
     "Cancel" : "უარყოფა",
+    "Choose as profile picture" : "აირჩიეთ პროფილის სურათად",
+    "Full name" : "სრული სახელი",
+    "No display name set" : "დისპლეი სახელი არაა დაყენებული",
     "Email" : "იმეილი",
     "Your email address" : "თქვენი იმეილ მისამართი",
+    "No email address set" : "ელ-ფოსტის მისამართი არაა დაყენებული",
+    "For password reset and notifications" : "პაროლის აღდგენისთვის და შეტყობინებებისთვის",
+    "Phone number" : "ტელეფონის ნომერი",
+    "Your phone number" : "თქვენი ტელეფონის ნომერი",
+    "Address" : "მისამართი",
+    "Your postal address" : "თქვენი საფოსტო მისამართი",
+    "Website" : "ვებ-საიტი",
+    "It can take up to 24 hours before the account is displayed as verified." : "თქვენი ანგარიშის ვერიფიცირებულად გამოჩენამ შეიძლება გასტანოს 24 საათი.",
+    "Link https://…" : "ბმული https://...",
+    "Twitter" : "Twitter-ი",
+    "Twitter handle @…" : "Twitter @…",
+    "You are member of the following groups:" : "თქვენ ხართ შემდეგი ჯგუფების წევრი:",
     "Language" : "ენა",
     "Help translate" : "თარგმნის დახმარება",
     "Password" : "პაროლი",
     "Current password" : "მიმდინარე პაროლი",
     "New password" : "ახალი პაროლი",
     "Change password" : "პაროლის შეცვლა",
+    "Web, desktop and mobile clients currently logged in to your account." : "ვებ, დესკტოპ და მობილური კლიენტები ამჟამად ავტორიზირებული თქვენს ანგარიშზე.",
+    "Device" : "მოწყობილობა",
+    "Last activity" : "ბოლო აქტივობა",
+    "App name" : "აპლიკაციის სახელი",
+    "Create new app password" : "ახალი აპლიკაციის პაროლის შექმნა",
+    "Use the credentials below to configure your app or device." : "ქვემოთ მოცემული უფლებამოსილებანის გამოყენება აპლიკაციისა თუ მოწყობილობისთვის.",
+    "For security reasons this password will only be shown once." : "უსაფრთხოების მიზნით ეს პაროლი გამოჩნდება მხოლოდ ერთხელ.",
     "Username" : "მომხმარებლის სახელი",
+    "Done" : "დასრულებულია",
+    "Developed by the {communityopen}Nextcloud community{linkclose}, the {githubopen}source code{linkclose} is licensed under the {licenseopen}AGPL{linkclose}." : "განავითარა {communityopen}Nextcloud საზოგადოებამ{linkclose}, {githubopen}კოდი{linkclose} is ლიცენზირებულია {licenseopen}AGPL ლიცენზიით{linkclose}.",
+    "Follow us on Google+" : "გამოგვყევით Google+-ზე",
+    "Like our Facebook page" : "მოიწონეთ ჩვენი Facebook გვერდი",
+    "Follow us on Twitter" : "გამოგვყევით Twitter-ზე",
+    "Check out our blog" : "იხილეთ ჩვენი ბლოგი",
+    "Subscribe to our newsletter" : "გამოიწერეთ ჩვენი სიახლეები",
+    "Settings" : "პარამეტრები",
+    "Show storage location" : "საცავის ადგილმდებარეობის ჩვენება",
+    "Show user backend" : "მომხმარებლის ბექენდის ჩვენება",
+    "Show last login" : "ბოლო ავტორიზაციის ჩვენება",
+    "Show email address" : "მოხმარებლის ელ-ფოსტის მისამართის ჩვენება",
+    "Send email to new user" : "გაუგზავნეთ ელ-წერილი ახალ მომხმარებელს",
+    "When the password of a new user is left empty, an activation email with a link to set the password is sent." : "როდესაც ახალი მომხმარებლის პაროლი არაა მითითებული, მომხმარებელს ელ-ფოსტაზე ეგზავნება აქტივაციის წერილი პროლის დაყენების ბმულით.",
+    "E-Mail" : "ელ-ფოსტა",
     "Create" : "შექმნა",
+    "Admin Recovery Password" : "ადმინისტრატორის პაროლის განახლება",
+    "Enter the recovery password in order to recover the users files during password change" : "მოხმარებლების პაროლის შეცვლის შემდეგ მათი ფაილების აღსადგენად შეიყვანეთ აღსადგენი პაროლი",
+    "Everyone" : "ყველა",
+    "Admins" : "ადმინისტრატორები",
+    "Disabled" : "გათიშული",
+    "Default quota" : "საწყისი კვოტა",
+    "Please enter storage quota (ex: \"512 MB\" or \"12 GB\")" : "შეიყვანეთ მოცულობის კვოტა (მაგ.: \"512 მბ\" ან \"12 გბ\")",
     "Unlimited" : "ულიმიტო",
     "Other" : "სხვა",
+    "Group admin for" : "ადმინისტრატორის შეჯგუფება",
     "Quota" : "ქვოტა",
+    "Storage location" : "საცავის ადგილმდებარეობა",
+    "User backend" : "მომხმარებელის ბექენდი",
+    "Last login" : "ბოლო ავტორიზაცია",
+    "change full name" : "სრული სახელის ცვლილება",
     "set new password" : "დააყენეთ ახალი პაროლი",
+    "change email address" : "ელ-ფოსტის მისამართის ცვლილება",
     "Default" : "საწყისი პარამეტრები",
+    "Enabled" : "მოქმედია",
+    "Not enabled" : "არაა მოქმედი",
+    "Please provide an admin recovery password, otherwise all user data will be lost" : "გთხოვთ მოგვაწოდოთ ადმინისტრატორის აღდგენის პაროლი, სხვა შემთხვევაში ყველა მონაცემი დაიკარგება.",
+    "Backend doesn't support password change, but the user's encryption key was successfully updated." : "ბექენდი არ უჭერს მხარს პაროლის ცვილებას, თუმცა მომხმარებლის შიფრაციის გასაღები წარმატებით განახლდა.",
+    "test email settings" : "ელ-ფოსტის პარამეტრების შემოწმება",
     "Invalid request" : "არასწორი მოთხოვნა",
     "Admins can't remove themself from the admin group" : "ადმინისტრატორებს არ შეუძლიათ საკუთარი თავის წაშლა ადმინ ჯგუფიდან",
     "Unable to add user to group %s" : "მომხმარებლის დამატება ვერ მოხეხდა ჯგუფში %s",
     "Unable to remove user from group %s" : "მომხმარებლის წაშლა ვერ მოხეხდა ჯგუფიდან %s",
+    "Sending..." : "იგზავნება...",
+    "_You have %n app update pending_::_You have %n app updates pending_" : ["თქვენ მოლოდინში გაქვთ %n აპლიკაციის განახლება"],
+    "Uninstalling ...." : "წაშლა ...",
+    "Error while uninstalling app" : "აპლიკაციის წაშლისას წარმოიშვა შეცდომა",
+    "Uninstall" : "წაშლა",
     "__language_name__" : "ქართული",
+    "Personal info" : "პირადი ინფორმაცია",
+    "Sessions" : "სესიები",
+    "App passwords" : "აპლიკაციის პაროლები",
+    "Sync clients" : "კლიენტების სინქრონიზაცია",
+    "This is used for sending out notifications." : "ეს გამოიყენება შეტყობინების გადაგზავნისთვის.",
+    "php does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "როგორც ჩანს PHP სისტემის გარემოს ცვლადების მიღებისთვის არაა სწორად მოწყობილი. ეს ტესტი getenv(\"PATH\") ით აბრუნებს მხოლოდ ცარიელ პასუხს.",
+    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm." : "გთხოვთ PHP-ის კონფიგურაციის ჩანაწერებისთვის და მისი სერვერზე კონფიგურაციისთვის გადახედოთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">დაყენების დოკუემნტაციას ↗</a>. ეს განსაკუთრებით საჭიროა როდესაც იყენებთ php-fpm-ს.",
+    "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "როგორც ჩანს PHP დაყენებულია ისე, რომ შიდა დოკუმენტური ბლოკები წაშალოს. ეს რამდენიმე მთავარ აპლიკაციას გახდის მიუწვდომელს.",
+    "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s დაყენებულია %2$s-ზე დაბალი ვერსიით, სტაბილურობისთვის და ხარისხიანი მოქმედების მიზნებისთვის რეკომენდირებულია განაახლოთ ახალ %1$s ვერსიამდე.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP მოდული 'fileinfo' არ არსებობს. ჩვენ გირჩევთ რომ აუცილებლად ჩართოთ ეს მოდული, რომ მიიღოთ კარგი შედეგები mime-type–ს აღმოჩენისას.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "ტრაზაქციული ფაილის ჩაკეტვა გათიშულია, ამან შეიძლება გამოიწვიოს გარკვეული პრობლემები. პრობლემებისგან თავის ასარიდებლად აამოქმედეთ 'filelocking.enabled' config.php-ში. დამატებითი ინფორმაციისთვის იხილეთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">დოუმენტაცია ↗</a>.",
+    "This means that there might be problems with certain characters in file names." : "ეს განაპირობებს ფაილის სახელში ზოგ ნიშანთან პრობლემის გამოჩენას.",
+    "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "ერთ-ერთი შემდეგ ლოკალიზაციათაგანის მხარდასაჭერად გთავაზობთ თქვნს სისტემაზე დააყენოთ აუცილებელი პაკეტები: %s.",
+    "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "თუ თქვენი სისტემა იყენებს კრონს და არაა ინსტალაცია არაა დაყენებული დომენის დასაწყისში, შესაძლოა გამოჩნდეს პრობლემები URL გენერაციასთან. ამ პრობლემებისგან თავის ასარიდებლად, \"overwrite.cli.url\" პარამეტრის თქვენს config.php ფაილში მიანიჭერთ ინსტალაციის მისამართი (რეკომენდირებულია: \"%s\")",
+    "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "CLI-ით კრონ საქმის ეგზეკუცია ვერ მოხერხდა. წარმოიშვა შემდეგი ტექნიკური შეცდომები:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "გთხოვთ გადაამოწმოთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">ინსტალაციის სახელმძღვენელოები ↗</a>, და ნახოთ თუ აღმოაჩენთ რაიმე შეცდომას ან გაფრთხილებას <a href=\"%s\">ლოგში</a>.",
     "Cron" : "Cron–ი",
+    "Last cron job execution: %s." : "ბოლო საქმის ეგზეკუცია: %s.",
+    "Last cron job execution: %s. Something seems wrong." : "ბოლო საქმის ეგზეკუცია: %s. რაღაც არასწორია.",
+    "Cron was not executed yet!" : "კრონი ჯერ არ გაშვებულა!",
+    "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php რეგისტრირებულია ვებკრონის სერვისით რომ 15 წუთში ერთხელ http-თი გაიშვას.",
+    "Use system's cron service to call the cron.php file every 15 minutes." : "გამოიყენეთ სისტემის კრონი cron.php ფაილის გასაშვებად ყოველ 15 წუთში.",
+    "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "ამის გასაშვებად საჭიროა გქონდეს PHP posix გაფართოება. მეტი დეტალებისთვის იხილეთ {linkstart}PHP დოკუმენტაცია{linkend}. ",
+    "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "მიეცით მომხმარებლებს ავტოდასრულების უფლება გაზიარების დიალოგებში. იმ შემთხვევაში თუ ეს ფუნქცია არაა მოქმედი, საჭირო იქნება სრული მომხმარებლის სახელის ან ელ-ფოსტის მისამართის შეყვანა.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "სხვა მონაცემთა ბაზის მიგრაციისთვის გამოიყენეთ command line ხელსაწყო: 'occ db:convert-type', ან იხილეთ <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">დოუმენტაცია ↗</a>.",
+    "Uninstall app" : "აპლიკაციის წაშლა",
+    "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "გამარჯობა,<br><br>მსურს შეგატყობინოთ რომ გაგაჩნიათ %sანგარიში.<br><br>თქვენი მომხმარებლის სახელი: <strong>%s</strong><br>მიიღეთ მასთან წვდომა:<strong><a href=\"%s\">%s</a></strong><br><br>",
+    "Cheers!" : "წარმატებები!",
+    "Hey there,\n\njust letting you know that you now have a %s account.\n\nYour username: %s\nAccess it: %s\n\n" : "გამარჯობა,\n\nმსურს შეგატყობინოთ რომ გაგაჩნიათ %sანგარიში.\n\nთქვენი მომხმარებლის სახელი: %s\nმიიღეთ მასთან წვდომა: %s\n\n",
+    "For password recovery and notifications" : "პაროლის აღდგენისთვის და შეტყობინებებისთვის",
+    "Your website" : "თქვენი ვებ-საიტი",
+    "Your Twitter handle" : "თქვენი Twitter-is @...",
     "Get the apps to sync your files" : "აპლიკაცია ფაილების სინქრონიზაციისთვის",
+    "Desktop client" : "დესკტოპ კლიენტი",
+    "Android app" : "Android აპლიკაცია",
+    "iOS app" : "iOS აპლიკაცია",
+    "If you want to support the project {contributeopen}join development{linkclose} or {contributeopen}spread the word{linkclose}!" : "თუ გსურთ დაეხმაროთ პროექტს {contributeopen}შეუერთდით დეველომენტს{linkclose} ან {contributeopen}გაავრცელეთ სიტყვა{linkclose}!",
     "Show First Run Wizard again" : "მაჩვენე თავიდან გაშვებული ვიზარდი",
-    "Name" : "სახელი"
+    "Passcodes that give an app or device permissions to access your account." : "პასკოდები რომლებიც აძლევენ აპლიკაციებს ან მოწყობილობებს თქვენი ანგარიშით სარგებლობის უფლებას.",
+    "Name" : "სახელი",
+    "Follow us on Google Plus!" : "გამოგვყევით Google Plus-ზე!",
+    "Like our facebook page!" : "მოიწონეთ ჩვენი Facebook გვერდი!",
+    "Subscribe to our twitter channel!" : "გამოიწერეთ ჩვენი twirtter არხი!",
+    "Subscribe to our news feed!" : "გამოიწერეთ ჩვენი სიახლეების ლენტა!",
+    "Subscribe to our newsletter!" : "გამოიწერეთ ჩვენი სიახლეები!",
+    "Show last log in" : "ბოლო ავტორიზაციის ჩვენება",
+    "Group name" : "ჯგუფის სახელი",
+    "You have now an %s account, you can add, protect, and share your data." : "ახლა გაქვთ %s ანგარიში, შეგიძლიათ დაამატოთ, დაიცვათ და გააზიაროთ თქვენი მონაცემები.",
+    "Verifying" : "მოწმდება",
+    "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Ticks section and the documentation for more information." : "თქვენი ნიმუშის უსაფრთხოებისა და გამართული მოქმედებისთვის მნიშვნელოვანია ყველაფერი სწორად იყოს კონფიგურირებული. თქვენს დასახმარებლად ვატარებთ გარკვეულ ავტომატიზირებულ შემოწმებს. გთხოვთ იხილოთ რჩევებისა და ხრიკების სექცია და მეტი ინფორმაციისთვის გადახედოთ დოკუმენტაციას.",
+    "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with MIME type detection." : "PHP მოდული 'fileinfo' არ არსებობს. ჩვენ გირჩევთ რომ აუცილებლად ჩართოთ ეს მოდული, რომ მიიღოთ კარგი შედეგები MIME type–ის აღმოჩენისას.",
+    "Web, desktop, mobile clients and app specific passwords that currently have access to your account." : "ვებ, დესკტოპ, მობილური კლიენტები და აპლიკაცია-სპეციფიური პაროლები რომლებსაც ამჟამად გააჩნიათ წვდომა თქვენს აგარიშზე.",
+    "Here you can generate individual passwords for apps so you don’t have to give out your password. You can revoke them individually too." : "აქ აპლიკაციებისთვის შეგიძლიათ დააგენერიროთ ინდივიდუალური პაროლები, ასე რომ არ დაგჭირდებათ თქვენი პაროლის გამოყენება. ასევე შეგიძლიათ მათი ინდივიდუალურად წაშლაც.",
+    "Follow us on Google+!" : "გამოგვყევით Google+-ზე!",
+    "Follow us on Twitter!" : "გამოგვყევით Twitter-ზე!",
+    "Check out our blog!" : "იხილეთ ჩვენი ბლოგი!"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/settings/l10n/ko.js b/settings/l10n/ko.js
index 7f255f95a88..75ed7441676 100644
--- a/settings/l10n/ko.js
+++ b/settings/l10n/ko.js
@@ -241,9 +241,7 @@ OC.L10N.register(
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "읽기 전용 설정이 활성화되었습니다. 이 상태에서는 웹 인터페이스를 통하여 일부 설정을 변경할 수 없습니다. 또한 매 업데이트마다 파일을 쓸 수 있는 상태로 변경해야 합니다.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Zend OPcache, eAccelerator 같은 캐시/가속기 문제일 수도 있습니다.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "데이터베이스가 \"READ COMMITTED\" 트랜잭션 격리 수준에서 실행되고 있지 않습니다. 여러 작업이 동시에 실행될 때 문제가 발생할 수 있습니다.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "트랜잭션 파일 잠금이 비활성화되어있어 동시 접근 시 문제가 발생할 수 있습니다. config.php에서 'filelocking.enabled'를 활성화하여 이 문제를 해결할 수 있습니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "System locale can not be set to a one which supports UTF-8." : "UTF-8을 지원하는 시스템 로캘을 사용할 수 없습니다.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">설치 가이드 ↗</a>를 확인하고 <a href=\"%s\">로그</a>의 오류 또는 경고를 확인하십시오.",
     "All checks passed." : "모든 검사를 통과했습니다.",
     "For optimal performance it's important to configure background jobs correctly. For bigger instances 'Cron' is the recommended setting. Please see the documentation for more information." : "최적 성능을 위해서 백그라운드 작업을 올바르게 설정하는 것을 추천합니다. 큰 인스턴스에서는 'Cron'을 사용하는 것을 추천합니다. 더 많은 정보를 보려면 문서를 참조하십시오.",
     "Execute one task with each page loaded" : "개별 페이지를 불러올 때마다 실행",
@@ -271,7 +269,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "이 인스턴스를 최적화하고 사용할 수 있는 여러 기능과 설정을 변경할 수 있습니다. 더 많은 정보를 보려면 여기에서 시작하십시오.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "현재 백엔드 데이터베이스로 SQLite를 사용하고 있습니다. 대규모의 파일을 관리하려고 한다면 다른 데이터베이스 백엔드로 전환할 것을 권장합니다.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "특히 파일 동기화를 위해 데스크톱 클라이언트를 사용할 예정인 경우 권장됩니다.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "다른 데이터베이스로 마이그레이션하려면 'occ db:convert-type' 명령행 도구를 사용하거나 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "How to do backups" : "백업 방법",
     "Advanced monitoring" : "고급 모니터링",
     "Performance tuning" : "성능 튜닝",
@@ -373,10 +370,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP에서 인라인 doc 블록을 삭제하도록 설정되어 있습니다. 일부 코어 앱에 접근할 수 없을 수도 있습니다.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s의 버전 %2$s 미만이 설치되어 있습니다. 안정성과 성능을 위해 %1$s의 새로운 버전으로 업데이트하는 것을 권장합니다.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP의 'fileinfo' 모듈이 없습니다. 올바른 MIME 형식 감지를 위해서 이 모듈을 활성화하는 것을 추천합니다.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "트랜잭션 파일 잠금이 비활성화되어있어 동시 접근 시 문제가 발생할 수 있습니다. config.php에서 'filelocking.enabled'를 활성화하여 이 문제를 해결할 수 있습니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "This means that there might be problems with certain characters in file names." : "파일 이름의 일부 문자에 문제가 생길 수도 있습니다.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "다음 중 하나 이상의 로캘을 지원하기 위하여 필요한 패키지를 시스템에 설치하는 것을 추천합니다: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "도메인의 루트 디렉터리 아래에 설치되어 있지 않고 시스템 cron을 사용한다면 URL 생성에 문제가 발생할 수도 있습니다. 이 문제를 해결하려면 설치본의 웹 루트 경로에 있는 config.php 파일의 \"overwrite.cli.url\" 옵션을 변경하십시오(제안: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "CLI로 cronjob을 실행할 수 없었습니다. 다음 기술적 오류가 발생했습니다:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">설치 가이드 ↗</a>를 확인하고 <a href=\"%s\">로그</a>의 오류 또는 경고를 확인하십시오.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "마지막 cron 작업 실행: %s.",
     "Last cron job execution: %s. Something seems wrong." : "마지막 cron 작업 실행: %s. 문제가 발생한 것 같습니다.",
@@ -385,6 +384,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "시스템의 cron 서비스를 통하여 15분마다 cron.php 파일을 실행합니다.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "실행하려면 PHP POSIX 확장이 필요합니다. 자세한 내용은 {linkstart}PHP 사용 설명서{linkend}를 참고하십시오.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "공유 대화 상자에서 사용자 이름 자동 완성을 사용합니다. 이 설정을 사용하지 않으면 전체 사용자 이름을 입력해야 합니다.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "다른 데이터베이스로 마이그레이션하려면 'occ db:convert-type' 명령행 도구를 사용하거나 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "Uninstall app" : "앱 삭제",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "안녕하세요.<br><br>%s 계정을 사용할 수 있음을 알려 드립니다.<br><br>사용자 이름: <strong>%s</strong><br>접근 링크: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "감사합니다!",
diff --git a/settings/l10n/ko.json b/settings/l10n/ko.json
index 0f8b4c6925b..ddfa17ca44f 100644
--- a/settings/l10n/ko.json
+++ b/settings/l10n/ko.json
@@ -239,9 +239,7 @@
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "읽기 전용 설정이 활성화되었습니다. 이 상태에서는 웹 인터페이스를 통하여 일부 설정을 변경할 수 없습니다. 또한 매 업데이트마다 파일을 쓸 수 있는 상태로 변경해야 합니다.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Zend OPcache, eAccelerator 같은 캐시/가속기 문제일 수도 있습니다.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "데이터베이스가 \"READ COMMITTED\" 트랜잭션 격리 수준에서 실행되고 있지 않습니다. 여러 작업이 동시에 실행될 때 문제가 발생할 수 있습니다.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "트랜잭션 파일 잠금이 비활성화되어있어 동시 접근 시 문제가 발생할 수 있습니다. config.php에서 'filelocking.enabled'를 활성화하여 이 문제를 해결할 수 있습니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "System locale can not be set to a one which supports UTF-8." : "UTF-8을 지원하는 시스템 로캘을 사용할 수 없습니다.",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">설치 가이드 ↗</a>를 확인하고 <a href=\"%s\">로그</a>의 오류 또는 경고를 확인하십시오.",
     "All checks passed." : "모든 검사를 통과했습니다.",
     "For optimal performance it's important to configure background jobs correctly. For bigger instances 'Cron' is the recommended setting. Please see the documentation for more information." : "최적 성능을 위해서 백그라운드 작업을 올바르게 설정하는 것을 추천합니다. 큰 인스턴스에서는 'Cron'을 사용하는 것을 추천합니다. 더 많은 정보를 보려면 문서를 참조하십시오.",
     "Execute one task with each page loaded" : "개별 페이지를 불러올 때마다 실행",
@@ -269,7 +267,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "이 인스턴스를 최적화하고 사용할 수 있는 여러 기능과 설정을 변경할 수 있습니다. 더 많은 정보를 보려면 여기에서 시작하십시오.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "현재 백엔드 데이터베이스로 SQLite를 사용하고 있습니다. 대규모의 파일을 관리하려고 한다면 다른 데이터베이스 백엔드로 전환할 것을 권장합니다.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "특히 파일 동기화를 위해 데스크톱 클라이언트를 사용할 예정인 경우 권장됩니다.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "다른 데이터베이스로 마이그레이션하려면 'occ db:convert-type' 명령행 도구를 사용하거나 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "How to do backups" : "백업 방법",
     "Advanced monitoring" : "고급 모니터링",
     "Performance tuning" : "성능 튜닝",
@@ -371,10 +368,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP에서 인라인 doc 블록을 삭제하도록 설정되어 있습니다. 일부 코어 앱에 접근할 수 없을 수도 있습니다.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s의 버전 %2$s 미만이 설치되어 있습니다. 안정성과 성능을 위해 %1$s의 새로운 버전으로 업데이트하는 것을 권장합니다.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP의 'fileinfo' 모듈이 없습니다. 올바른 MIME 형식 감지를 위해서 이 모듈을 활성화하는 것을 추천합니다.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "트랜잭션 파일 잠금이 비활성화되어있어 동시 접근 시 문제가 발생할 수 있습니다. config.php에서 'filelocking.enabled'를 활성화하여 이 문제를 해결할 수 있습니다. 자세한 내용은 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "This means that there might be problems with certain characters in file names." : "파일 이름의 일부 문자에 문제가 생길 수도 있습니다.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "다음 중 하나 이상의 로캘을 지원하기 위하여 필요한 패키지를 시스템에 설치하는 것을 추천합니다: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "도메인의 루트 디렉터리 아래에 설치되어 있지 않고 시스템 cron을 사용한다면 URL 생성에 문제가 발생할 수도 있습니다. 이 문제를 해결하려면 설치본의 웹 루트 경로에 있는 config.php 파일의 \"overwrite.cli.url\" 옵션을 변경하십시오(제안: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "CLI로 cronjob을 실행할 수 없었습니다. 다음 기술적 오류가 발생했습니다:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "<a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">설치 가이드 ↗</a>를 확인하고 <a href=\"%s\">로그</a>의 오류 또는 경고를 확인하십시오.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "마지막 cron 작업 실행: %s.",
     "Last cron job execution: %s. Something seems wrong." : "마지막 cron 작업 실행: %s. 문제가 발생한 것 같습니다.",
@@ -383,6 +382,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "시스템의 cron 서비스를 통하여 15분마다 cron.php 파일을 실행합니다.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "실행하려면 PHP POSIX 확장이 필요합니다. 자세한 내용은 {linkstart}PHP 사용 설명서{linkend}를 참고하십시오.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "공유 대화 상자에서 사용자 이름 자동 완성을 사용합니다. 이 설정을 사용하지 않으면 전체 사용자 이름을 입력해야 합니다.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "다른 데이터베이스로 마이그레이션하려면 'occ db:convert-type' 명령행 도구를 사용하거나 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">사용 설명서 ↗</a>를 참고하십시오.",
     "Uninstall app" : "앱 삭제",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "안녕하세요.<br><br>%s 계정을 사용할 수 있음을 알려 드립니다.<br><br>사용자 이름: <strong>%s</strong><br>접근 링크: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "감사합니다!",
diff --git a/settings/l10n/nb.js b/settings/l10n/nb.js
index 687f36bfe13..63557e12ec9 100644
--- a/settings/l10n/nb.js
+++ b/settings/l10n/nb.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Advarsler om sikkerhet og oppsett",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Det er viktig for sikkerheten og ytelsen på din installasjon at alt er satt opp rett. For å hjelpe deg er det satt i verk noen automatiske sjekker. Se \"Tips og triks\"-delen og i dokumentasjonen for mer informasjon",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP ser ikke ut til å være satt opp riktig for å lese systemets miljøvariabler. Testen med getenv(\"PATH\") returnerer bare et tomt svar.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Sjekk <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installasjonsdokumentasjonen ↗</a> etter PHP-oppsettsnotater og oppsett av PHP på tjeneren din, særlig om du bruker php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Det skrivebeskyttede oppsettet er blitt aktivert. Dette forhindrer setting av visse oppsett via vev-grensesnittet. Videre må config-filen gjøres skrivbar manuelt for hver oppdatering.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Det ser ut til at at PHP er satt opp til å fjerne innebygde doc-blokker. Dette gjør at flere av kjerneapplikasjonene blir utilgjengelige.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dette forårsakes sannsynligvis av hurtiglager/akselerator, som f.eks. Zend OPcache eller eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Din database kjører ikke med \"READ COMMITED\" transaksjonsisolering. Dette kan lage problemer når flere handlinger kjøres i paralell.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s lavere enn versjon %2$s er installert. Det anbefales å oppgradere til en nyere %1$s-versjon for å få bedre stabilitet og ytelse.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-modulen 'fileinfo' mangler. Det anbefales at du aktiverer denne modulen for å kunne detektere MIME-typen korrekt.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaksjonsbasert fil-låsing er deaktivert. Dette kan føre til konflikt. Aktiver \"filelocking.enabled\" i config.php for å unngå disse problemene. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasjonen ↗</a> for mer informasjon.",
     "System locale can not be set to a one which supports UTF-8." : "Kan ikke sette systemets nasjonale innstillinger til en som støtter UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Dette betyr at det kan forekomme problemer med visse tegn i filnavn.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Det anbefales sterkt å installere de påkrevde pakkene på systemet ditt for å støtte en av følgende lokaltilpasninger: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Hvis installasjonen din ikke er installert i roten av domenet og bruker systemets Cron, kan det bli problemer med URL-genereringen. For å unngå disse problemene, sett \"overwrite.cli.url\" i filen config.php til vev-roten for installasjonen din (Foreslått: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Det var ikke mulig å kjøre cronjobben via CLI. Følgende tekniske feil oppstod:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Dobbeltsjekk <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installasjonsguiden ↗</a>, og se etter feil eller advarsler i <a href=\"%s\">loggen</a>.",
     "All checks passed." : "Alle sjekker bestått.",
     "Background jobs" : "Bakgrunnsjobber",
     "Last job ran %s." : "Siste jobb kjørte %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Det er mange funksjoner og oppsettsbrytere tilgjengelig for optimal tilpasning og bruk av denne installasjonen. Her har du noen punkter med ytterligere informasjon.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite er for øyeblikket brukt som database. For større installasjoner vil vi anbefale deg å benytte en annen databasetype.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dette er spesielt anbefalt når skrivebordsklient brukes for filsynkronisering.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "For å migrere til en annen database, bruk kommandolinjeverktøyet: 'occ db:convert-type', eller les i <a target=\"_blank\" href=\"%s\">dokumentasjonen ↗</a>.",
     "How to do backups" : "Hvordan ta sikkerhetskopier",
     "Advanced monitoring" : "Avansert overvåking",
     "Performance tuning" : "Forbedre ytelsen",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Det ser ut for at PHP er satt opp til å fjerne innebygde doc-blokker. Dette gjør at flere av kjerneprogrammene blir utilgjengelige.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s lavere enn versjon %2$s er installert. Vi anbefaler å oppgradere til en nyere %1$s-versjon for å få bedre stabilitet og ytelse.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP modulen 'fileinfo' mangler. Vi anbefaler at du aktiverer denne modulen for å kunne detektere MIME-typen korrekt.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaksjonsbasert fil-låsing er deaktivert. Dette kan føre til konflikt. Aktiver \"filelocking.enabled\" i config.php for å unngå disse problemene. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasjonen ↗</a> for mer informasjon.",
     "This means that there might be problems with certain characters in file names." : "Dette betyr at det kan forekomme problemer med visse tegn i filnavn.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Vi anbefaler sterkt å installere de påkrevde pakkene på systemet ditt for å støtte en av følgende nasjonale innstillinger: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Hvis installasjonen din ikke er installert i roten av domenet og bruker systemets Cron, kan det bli problemer med URL-genereringen. For å unngå disse problemene, sett \"overwrite.cli.url\" i filen config.php til vev-roten for installasjonen din (Foreslått: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Det var ikke mulig å kjøre cron-jobben vi CLI. Følgende tekniske feil oppstod:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Dobbeltsjekk <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installasjonsguiden ↗</a>, og se etter feil eller advarsler i <a href=\"%s\">loggen</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Siste kjøring av Cron-jobb: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Siste kjøring av Cron-jobb: %s. Noe ser ut til å være galt.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Bruk systemets cron-tjeneste til å kalle cron.php hvert kvarter.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "For å kjøre denne trenger du «PHP posix extension». Se {linkstart}PHP dokumentasjonen{linkend} for flere detaljer.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Tillat automatisk fullføring av brukernavn i delingsdialogen. Uten dette valget må hele brukernavnet oppgis.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "For å migrere til en annen database, bruk kommandolinjeverktøyet: 'occ db:convert-type', eller les i <a target=\"_blank\" href=\"%s\">dokumentasjonen ↗</a>.",
     "Uninstall app" : "Avinstaller app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hei,<br><br>vil bare opplyse deg om at du har en %s konto.<br><br>Ditt brukernavn: <strong>%s</strong><br>Gå dit: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Hadet!",
diff --git a/settings/l10n/nb.json b/settings/l10n/nb.json
index 9e7d7bbc78b..e3b2ec1f088 100644
--- a/settings/l10n/nb.json
+++ b/settings/l10n/nb.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Advarsler om sikkerhet og oppsett",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Det er viktig for sikkerheten og ytelsen på din installasjon at alt er satt opp rett. For å hjelpe deg er det satt i verk noen automatiske sjekker. Se \"Tips og triks\"-delen og i dokumentasjonen for mer informasjon",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP ser ikke ut til å være satt opp riktig for å lese systemets miljøvariabler. Testen med getenv(\"PATH\") returnerer bare et tomt svar.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Sjekk <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installasjonsdokumentasjonen ↗</a> etter PHP-oppsettsnotater og oppsett av PHP på tjeneren din, særlig om du bruker php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Det skrivebeskyttede oppsettet er blitt aktivert. Dette forhindrer setting av visse oppsett via vev-grensesnittet. Videre må config-filen gjøres skrivbar manuelt for hver oppdatering.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Det ser ut til at at PHP er satt opp til å fjerne innebygde doc-blokker. Dette gjør at flere av kjerneapplikasjonene blir utilgjengelige.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dette forårsakes sannsynligvis av hurtiglager/akselerator, som f.eks. Zend OPcache eller eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Din database kjører ikke med \"READ COMMITED\" transaksjonsisolering. Dette kan lage problemer når flere handlinger kjøres i paralell.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s lavere enn versjon %2$s er installert. Det anbefales å oppgradere til en nyere %1$s-versjon for å få bedre stabilitet og ytelse.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-modulen 'fileinfo' mangler. Det anbefales at du aktiverer denne modulen for å kunne detektere MIME-typen korrekt.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaksjonsbasert fil-låsing er deaktivert. Dette kan føre til konflikt. Aktiver \"filelocking.enabled\" i config.php for å unngå disse problemene. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasjonen ↗</a> for mer informasjon.",
     "System locale can not be set to a one which supports UTF-8." : "Kan ikke sette systemets nasjonale innstillinger til en som støtter UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Dette betyr at det kan forekomme problemer med visse tegn i filnavn.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Det anbefales sterkt å installere de påkrevde pakkene på systemet ditt for å støtte en av følgende lokaltilpasninger: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Hvis installasjonen din ikke er installert i roten av domenet og bruker systemets Cron, kan det bli problemer med URL-genereringen. For å unngå disse problemene, sett \"overwrite.cli.url\" i filen config.php til vev-roten for installasjonen din (Foreslått: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Det var ikke mulig å kjøre cronjobben via CLI. Følgende tekniske feil oppstod:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Dobbeltsjekk <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installasjonsguiden ↗</a>, og se etter feil eller advarsler i <a href=\"%s\">loggen</a>.",
     "All checks passed." : "Alle sjekker bestått.",
     "Background jobs" : "Bakgrunnsjobber",
     "Last job ran %s." : "Siste jobb kjørte %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Det er mange funksjoner og oppsettsbrytere tilgjengelig for optimal tilpasning og bruk av denne installasjonen. Her har du noen punkter med ytterligere informasjon.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite er for øyeblikket brukt som database. For større installasjoner vil vi anbefale deg å benytte en annen databasetype.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dette er spesielt anbefalt når skrivebordsklient brukes for filsynkronisering.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "For å migrere til en annen database, bruk kommandolinjeverktøyet: 'occ db:convert-type', eller les i <a target=\"_blank\" href=\"%s\">dokumentasjonen ↗</a>.",
     "How to do backups" : "Hvordan ta sikkerhetskopier",
     "Advanced monitoring" : "Avansert overvåking",
     "Performance tuning" : "Forbedre ytelsen",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Det ser ut for at PHP er satt opp til å fjerne innebygde doc-blokker. Dette gjør at flere av kjerneprogrammene blir utilgjengelige.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s lavere enn versjon %2$s er installert. Vi anbefaler å oppgradere til en nyere %1$s-versjon for å få bedre stabilitet og ytelse.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP modulen 'fileinfo' mangler. Vi anbefaler at du aktiverer denne modulen for å kunne detektere MIME-typen korrekt.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transaksjonsbasert fil-låsing er deaktivert. Dette kan føre til konflikt. Aktiver \"filelocking.enabled\" i config.php for å unngå disse problemene. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentasjonen ↗</a> for mer informasjon.",
     "This means that there might be problems with certain characters in file names." : "Dette betyr at det kan forekomme problemer med visse tegn i filnavn.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Vi anbefaler sterkt å installere de påkrevde pakkene på systemet ditt for å støtte en av følgende nasjonale innstillinger: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Hvis installasjonen din ikke er installert i roten av domenet og bruker systemets Cron, kan det bli problemer med URL-genereringen. For å unngå disse problemene, sett \"overwrite.cli.url\" i filen config.php til vev-roten for installasjonen din (Foreslått: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Det var ikke mulig å kjøre cron-jobben vi CLI. Følgende tekniske feil oppstod:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Dobbeltsjekk <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installasjonsguiden ↗</a>, og se etter feil eller advarsler i <a href=\"%s\">loggen</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Siste kjøring av Cron-jobb: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Siste kjøring av Cron-jobb: %s. Noe ser ut til å være galt.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Bruk systemets cron-tjeneste til å kalle cron.php hvert kvarter.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "For å kjøre denne trenger du «PHP posix extension». Se {linkstart}PHP dokumentasjonen{linkend} for flere detaljer.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Tillat automatisk fullføring av brukernavn i delingsdialogen. Uten dette valget må hele brukernavnet oppgis.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "For å migrere til en annen database, bruk kommandolinjeverktøyet: 'occ db:convert-type', eller les i <a target=\"_blank\" href=\"%s\">dokumentasjonen ↗</a>.",
     "Uninstall app" : "Avinstaller app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hei,<br><br>vil bare opplyse deg om at du har en %s konto.<br><br>Ditt brukernavn: <strong>%s</strong><br>Gå dit: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Hadet!",
diff --git a/settings/l10n/nl.js b/settings/l10n/nl.js
index 26c547d6cd2..bc611c0e82d 100644
--- a/settings/l10n/nl.js
+++ b/settings/l10n/nl.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Beveiligings- en instellingswaarschuwingen",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Voor beveiliging en prestaties van je server is het belangrijk dat alles correct is geconfigureerd. Om je hierbij te helpen doen we paar automatische controles. Bekijk de Tips & Trucs sectie en de documentatie voor meer informatie.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP lijkt niet goed te zijn opgezet om systeemomgevingsvariabelen te bevragen. De test met getenv(\"PATH\") gaf een leeg resultaat.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Controleer de <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installatiedocumentatie ↗</a> voor php configuratienotities en de php configuratie van je server, zeker bij gebruik van php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "De Alleen-lezen config is ingeschakeld. Dit voorkomt het via de webinterface wijzigen van verschillende instellingen. Bovendien moet het bestand voor elke aanpassing handmatig op beschrijfbaar worden ingesteld.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is blijkbaar zo ingesteld dat inline doc blokken worden gestript. Hierdoor worden verschillende kern apps niet berijkbaar.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dit wordt vermoedelijk veroorzaakt door een cache/accelerator, zoals Zend OPcache of eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Je database draait niet met \"READ COMMITTED\" transactie-isolatie niveau. Dit kan problemen opleveren als er meerdere acties tegelijkertijd worden uitgevoerd.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s lager dan versie %2$s is geïnstalleerd, voor betere stabiliteit en prestaties adviseren wij om %1$s te vervangen door een nieuwere versie.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "De PHP module 'fileinfo' ontbreekt. We adviseren met klem om deze module te activeren om de beste resultaten te bereiken voor MIME-type detectie.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactionele bestandlocking is uitgeschakeld, dat zou namelijk kunnen leiden tot versiebeheerproblemen. Schakel 'filelocking enabled' in config.php in om deze problemen te voorkomen. Zie de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a> voor meer informatie.",
     "System locale can not be set to a one which supports UTF-8." : "De systeemtaal kan niet worden ingesteld op een taal die UTF-8 ondersteunt.",
     "This means that there might be problems with certain characters in filenames." : "Dat betekent dat er problemen kunnen optreden met bepaalde tekens in bestandsnamen.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "We adviseren met klem om de noodzakelijke pakketten op je systeem te installeren om een van de volgende talen te ondersteunen: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Als je installatie niet in de hoofddirectory van het domein staat, maar wel systeem cron gebruikt, dan kunnen er problemen ontstaan bij het genereren van URL's. Om deze problemen te voorkomen zou je de \"overwrite.cli.url\" optie in config.php moeten instellen op het webroot pad van je installatie (aanbevolen: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Het was niet mogelijk om de systeem cron via CLI uit te voeren. De volgende technische problemen traden op:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lees de   <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installatie handleiding</a> goed door en controleer op fouten en waarschuwingen in de <a href=\"%s\">logging</a>.",
     "All checks passed." : "Alle checks geslaagd",
     "Background jobs" : "Achtergrond jobs",
     "Last job ran %s." : "Laatste job liep %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Er zijn veel mogelijkheden en instellingsschakelaars beschikbaar om je installatie te optimaliseren. Hier zijn wat aanwijzigen.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wordt momenteel gebruikt als backend database. Voor grotere installaties adviseren we dat je omschakelt naar een andere database backend.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dit wordt vooral aanbevolen als de desktop client wordt gebruikt voor bestandssynchronisatie.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Om te migreren naar een andere database moet u de commandoregel tool gebruiken: 'occ db:convert-type', lees de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a>.",
     "How to do backups" : "Hoe maak je back-ups",
     "Advanced monitoring" : "Geavanceerde monitoring",
     "Performance tuning" : "Prestatie afstelling",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is blijkbaar zo ingesteld dat inline doc blokken worden gestript. Hierdoor worden verschillende kernmodules onbruikbaar.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s lager dan versie %2$s geïnstalleerd, voor betere stabiliteit en prestaties adviseren wij om %1$s te upgraden naar een nieuwere versie.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "De PHP module 'fileinfo' ontbreekt. We adviseren met klem om deze module te activeren om de beste resultaten te bereiken voor mime-type detectie.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactionele bestandlocking is uitgeschakeld, dat zou namelijk kunnen leiden tot versiebeheerproblemen. Schakel 'filelocking enabled' in config.php in om deze problemen te voorkomen. Zie de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a> voor meer informatie.",
     "This means that there might be problems with certain characters in file names." : "Dat betekent dat er problemen kunnen optreden met bepaalde tekens in bestandsnamen.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "We adviseren met klem om de noodzakelijke pakketten op je systeem te installeren om een van de volgende talen te ondersteunen: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Als je installatie niet in de hoofddirectory van het domein staat, maar wel cron gebruikt, dan kunnen er problemen ontstaan bij het genereren van URL's. Om deze problemen te voorkomen zou je de \"overwrite.cli.url\" optie in config.php moeten instellen op het webroot pad van je installatie (aanbevolen: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "het was niet mogelijk om de cronjob via CLI uit te voeren. De volgende technische problemen traden op:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lees de   <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installatie handleiding</a> goed door en controleer op fouten en waarschuwingen in de <a href=\"%s\">logging</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Laatst uitgevoerde cronjob: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Laatst uitgevoerde cronjob: %s. Er lijkt iets fout gegaan.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Gebruik de systeem cron service om cron.php elke 15 minuten aan te roepen.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Om dit te draaien, is de PHP posix extensie vereist. Bekijk {linkstart}PHP documentatie{linkend} voor meer informatie.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Sta auto-aanvullen van gebruikersnaam toe in de Delen-dialoog. Als dit is uitgeschakeld, moet de gebruikersnaam volledig worden ingevuld.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Om te migreren naar een andere database moet u de commandoregel tool gebruiken: 'occ db:convert-type', lees de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a>.",
     "Uninstall app" : "De-installeren app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hallo daar,<br><br>we willen je laten weten dat je nu een %s account hebt.<br><br>Je gebruikersnaam: <strong>%s</strong><br>Ga naar: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Proficiat!",
diff --git a/settings/l10n/nl.json b/settings/l10n/nl.json
index 7137c88f1bb..207ef2e6c06 100644
--- a/settings/l10n/nl.json
+++ b/settings/l10n/nl.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Beveiligings- en instellingswaarschuwingen",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Voor beveiliging en prestaties van je server is het belangrijk dat alles correct is geconfigureerd. Om je hierbij te helpen doen we paar automatische controles. Bekijk de Tips & Trucs sectie en de documentatie voor meer informatie.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP lijkt niet goed te zijn opgezet om systeemomgevingsvariabelen te bevragen. De test met getenv(\"PATH\") gaf een leeg resultaat.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Controleer de <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installatiedocumentatie ↗</a> voor php configuratienotities en de php configuratie van je server, zeker bij gebruik van php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "De Alleen-lezen config is ingeschakeld. Dit voorkomt het via de webinterface wijzigen van verschillende instellingen. Bovendien moet het bestand voor elke aanpassing handmatig op beschrijfbaar worden ingesteld.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is blijkbaar zo ingesteld dat inline doc blokken worden gestript. Hierdoor worden verschillende kern apps niet berijkbaar.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dit wordt vermoedelijk veroorzaakt door een cache/accelerator, zoals Zend OPcache of eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Je database draait niet met \"READ COMMITTED\" transactie-isolatie niveau. Dit kan problemen opleveren als er meerdere acties tegelijkertijd worden uitgevoerd.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s lager dan versie %2$s is geïnstalleerd, voor betere stabiliteit en prestaties adviseren wij om %1$s te vervangen door een nieuwere versie.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "De PHP module 'fileinfo' ontbreekt. We adviseren met klem om deze module te activeren om de beste resultaten te bereiken voor MIME-type detectie.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactionele bestandlocking is uitgeschakeld, dat zou namelijk kunnen leiden tot versiebeheerproblemen. Schakel 'filelocking enabled' in config.php in om deze problemen te voorkomen. Zie de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a> voor meer informatie.",
     "System locale can not be set to a one which supports UTF-8." : "De systeemtaal kan niet worden ingesteld op een taal die UTF-8 ondersteunt.",
     "This means that there might be problems with certain characters in filenames." : "Dat betekent dat er problemen kunnen optreden met bepaalde tekens in bestandsnamen.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "We adviseren met klem om de noodzakelijke pakketten op je systeem te installeren om een van de volgende talen te ondersteunen: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Als je installatie niet in de hoofddirectory van het domein staat, maar wel systeem cron gebruikt, dan kunnen er problemen ontstaan bij het genereren van URL's. Om deze problemen te voorkomen zou je de \"overwrite.cli.url\" optie in config.php moeten instellen op het webroot pad van je installatie (aanbevolen: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Het was niet mogelijk om de systeem cron via CLI uit te voeren. De volgende technische problemen traden op:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lees de   <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installatie handleiding</a> goed door en controleer op fouten en waarschuwingen in de <a href=\"%s\">logging</a>.",
     "All checks passed." : "Alle checks geslaagd",
     "Background jobs" : "Achtergrond jobs",
     "Last job ran %s." : "Laatste job liep %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Er zijn veel mogelijkheden en instellingsschakelaars beschikbaar om je installatie te optimaliseren. Hier zijn wat aanwijzigen.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite wordt momenteel gebruikt als backend database. Voor grotere installaties adviseren we dat je omschakelt naar een andere database backend.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Dit wordt vooral aanbevolen als de desktop client wordt gebruikt voor bestandssynchronisatie.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Om te migreren naar een andere database moet u de commandoregel tool gebruiken: 'occ db:convert-type', lees de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a>.",
     "How to do backups" : "Hoe maak je back-ups",
     "Advanced monitoring" : "Geavanceerde monitoring",
     "Performance tuning" : "Prestatie afstelling",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP is blijkbaar zo ingesteld dat inline doc blokken worden gestript. Hierdoor worden verschillende kernmodules onbruikbaar.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s lager dan versie %2$s geïnstalleerd, voor betere stabiliteit en prestaties adviseren wij om %1$s te upgraden naar een nieuwere versie.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "De PHP module 'fileinfo' ontbreekt. We adviseren met klem om deze module te activeren om de beste resultaten te bereiken voor mime-type detectie.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transactionele bestandlocking is uitgeschakeld, dat zou namelijk kunnen leiden tot versiebeheerproblemen. Schakel 'filelocking enabled' in config.php in om deze problemen te voorkomen. Zie de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a> voor meer informatie.",
     "This means that there might be problems with certain characters in file names." : "Dat betekent dat er problemen kunnen optreden met bepaalde tekens in bestandsnamen.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "We adviseren met klem om de noodzakelijke pakketten op je systeem te installeren om een van de volgende talen te ondersteunen: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Als je installatie niet in de hoofddirectory van het domein staat, maar wel cron gebruikt, dan kunnen er problemen ontstaan bij het genereren van URL's. Om deze problemen te voorkomen zou je de \"overwrite.cli.url\" optie in config.php moeten instellen op het webroot pad van je installatie (aanbevolen: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "het was niet mogelijk om de cronjob via CLI uit te voeren. De volgende technische problemen traden op:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lees de   <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installatie handleiding</a> goed door en controleer op fouten en waarschuwingen in de <a href=\"%s\">logging</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Laatst uitgevoerde cronjob: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Laatst uitgevoerde cronjob: %s. Er lijkt iets fout gegaan.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Gebruik de systeem cron service om cron.php elke 15 minuten aan te roepen.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Om dit te draaien, is de PHP posix extensie vereist. Bekijk {linkstart}PHP documentatie{linkend} voor meer informatie.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Sta auto-aanvullen van gebruikersnaam toe in de Delen-dialoog. Als dit is uitgeschakeld, moet de gebruikersnaam volledig worden ingevuld.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Om te migreren naar een andere database moet u de commandoregel tool gebruiken: 'occ db:convert-type', lees de  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentatie ↗</a>.",
     "Uninstall app" : "De-installeren app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hallo daar,<br><br>we willen je laten weten dat je nu een %s account hebt.<br><br>Je gebruikersnaam: <strong>%s</strong><br>Ga naar: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Proficiat!",
diff --git a/settings/l10n/pl.js b/settings/l10n/pl.js
index f883efecd9f..1b0fad22f72 100644
--- a/settings/l10n/pl.js
+++ b/settings/l10n/pl.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Ostrzeżenia bezpieczeństwa i konfiguracji",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Poprawna konfiguracja jest ważna dla bezpieczeństwa i wydajności Twojej instancji. W celach pomocniczych przeprowadzane są automatyczne kontrole. Więcej informacji można znaleźć w dziale Wskazówki i Porady oraz w dokumentacji.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP wydaje się być błędnie skonfigurowane odnośnie zapytania o zmienne środowiskowe systemu. Test gentenv(\"PATH\") zwraca pustą wartość.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Sprawdź proszę <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumenację instalacji </a> dla konfiguracji PHP Twojego serwera względem informacji konfiguracyjnych dokumentacji, zwłaszcza kiedy używasz php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Została włączona konfiguracja Read-Only. Zapobiegnie to ustawieniu niektórych konfiguracji poprzez interfejs web. Ponadto plikowi muszą zostać nadane prawa zapisu ręcznie dla każdej aktualizacji.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Najwidoczniej PHP jest tak ustawione, aby wycinać bloki wklejonych dokumentów. Może to spowodować, że niektóre wbudowane aplikacje będą niedostępne.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dzieje się tak prawdopodobnie przez cache lub akcelerator taki jak Zend OPcache lub eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Twoja baza danych nie działa z poziomem izolacji transakcji \"READ COMMITTED\". Może to powodować problemy kiedy wiele akcji będzie wykonywanych równolegle.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "Zainstalowana wersja %2$s jest starsza niż %1$s. Ze względów stabilności i wydajności zalecamy aktualizację do nowszej wersji %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Brak modułu PHP 'fileinfo'.  Zalecamy włączenie tego modułu, aby uzyskać najlepsze wyniki przy rozpoznawaniu typów MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakcyjne blokowanie plików jest wyłączone. Może to powodować problemy w działaniu. Włącz 'filelocking.enabled' w config.php, aby rozwiązać te problemy. Sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>, aby uzyskać więcej informacji.",
     "System locale can not be set to a one which supports UTF-8." : "Ustawienia regionalne systemu nie można ustawić na jeden, który obsługuje UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Oznacza to, że mogą być problemy z pewnymi znakami w nazwach plików.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Mocno sugerujemy, aby doinstalować do systemu wymagane pakiety, wspierające następujące języki: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Twoja instancja nie jest zainstalowana w katalogu głównym dla domeny, a używasz systemowego Cron'a, zatem mogą wystąpić kłopoty w poprawnym generowaniu URL'a. Aby zapobiec problemów ustaw proszę opcję \"overwrite.cli.url\" w Twoim pliku config.php do katalogu głównego Twojej instalacji (sugerowany: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nie było możliwe uruchomienie zadania cron przy pomocy CLI. Pojawił się następujący błąd techniczny: ",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Proszę sprawdzić dokładnie <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">przewodniki instalacji ↗</a> oraz błędy i ostrzeżenia w <a href=\"%s\">logu</a>.",
     "All checks passed." : "Wszystkie testy konfiguracji zakończyły się pomyślnie.",
     "Background jobs" : "Zadania w tle",
     "Last job ran %s." : "Ostatnie zadanie wykonano %s",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Dostępnych jest wiele funkcji i ustawień pozwalających na optymalne skonfigurowanie i używanie tej instancji. Tutaj uzyskasz więcej informacji.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite jest aktualnie używany jako baza danych. Dla większych instalacji zalecamy przełączenie na inną bazę danych.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Jest to szczególnie zalecane w przypadku korzystania z desktopowego klienta do synchronizacji plików.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Aby zmigrować do innej bazy danych użyj narzędzia z terminala: \"occ db:convert-type\" albo sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>.",
     "How to do backups" : "Jak zrobić kopie zapasowe",
     "Advanced monitoring" : "Zaawansowane monitorowanie",
     "Performance tuning" : "Podnoszenie wydajności",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Wygląda na to, że ustawienia PHP ucinają bloki wklejonych dokumentów. To sprawi, że niektóre wbudowane aplikacje będą niedostępne.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s jest zainstalowany poniżej wersji %2$s. Zalecamy podniesienie %1$s do wersji nowszej ze względu na stabilność i wydajność.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Brak modułu PHP „fileinfo”. Zalecamy włączenie tego modułu, aby uzyskać najlepsze wyniki podczas wykrywania typów MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakcyjne blokowanie plików jest wyłączone. Może to powodować problemy w działaniu. Włącz 'filelocking.enabled' w config.php, aby rozwiązać te problemy. Sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>, aby uzyskać więcej informacji.",
     "This means that there might be problems with certain characters in file names." : "Oznacza to, że mogą być problemy z niektórymi znakami w nazwach plików.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Zalecamy instalację na Twoim systemie komponentów wymaganych do obsługi języków: %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Jeśli twoja instalacja nie jest zainstalowana w katalogu root domeny i używa systemowego crona, mogą wystąpić problemy z tworzeniem adresów URL. Aby rozwiązać ten problem, proszę ustawić w swoim pliku config.php opcję \"overwrite.cli.url\" wskazując ścieżkę instalacji (sugerujemy: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Nie było możliwe do wykonania przez cron CLI. Pojawiły się następujące błędy techniczne:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Proszę sprawdzić dokładnie <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">przewodniki instalacji ↗</a> oraz błędy i ostrzeżenia w <a href=\"%s\">logu</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Ostatnie wykonanie zadania przez cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Ostatnie wykonanie zadania przez cron: %s. Wydaje się, że coś jest błędne.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Użyj systemowej usługi cron do wywoływania cron.php co 15 minut.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Aby to uruchomić potrzebujesz rozszerzenia posix do PHP. Po więcej informacji sprawdź {linkstart}dokumentację PHP{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Pozwól użytkownikowi na autouzupełnianie w oknie użytkownika. Jeśli ta opcja jest wyłączona, to pełna nazwa musi być wprowadzona.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Aby zmigrować do innej bazy danych użyj narzędzia z terminala: \"occ db:convert-type\" albo sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>.",
     "Uninstall app" : "Odinstaluj aplikację",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hej,<br><br>informujemy cię, że posiadasz od teraz konto %s.<br><br>Twoja nazwa użytkownika: <strong>%s</strong><br>Zaloguj się: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Pozdrawiam!",
diff --git a/settings/l10n/pl.json b/settings/l10n/pl.json
index e4f645e341e..ed8afb1e223 100644
--- a/settings/l10n/pl.json
+++ b/settings/l10n/pl.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Ostrzeżenia bezpieczeństwa i konfiguracji",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Poprawna konfiguracja jest ważna dla bezpieczeństwa i wydajności Twojej instancji. W celach pomocniczych przeprowadzane są automatyczne kontrole. Więcej informacji można znaleźć w dziale Wskazówki i Porady oraz w dokumentacji.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP wydaje się być błędnie skonfigurowane odnośnie zapytania o zmienne środowiskowe systemu. Test gentenv(\"PATH\") zwraca pustą wartość.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Sprawdź proszę <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumenację instalacji </a> dla konfiguracji PHP Twojego serwera względem informacji konfiguracyjnych dokumentacji, zwłaszcza kiedy używasz php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Została włączona konfiguracja Read-Only. Zapobiegnie to ustawieniu niektórych konfiguracji poprzez interfejs web. Ponadto plikowi muszą zostać nadane prawa zapisu ręcznie dla każdej aktualizacji.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Najwidoczniej PHP jest tak ustawione, aby wycinać bloki wklejonych dokumentów. Może to spowodować, że niektóre wbudowane aplikacje będą niedostępne.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Dzieje się tak prawdopodobnie przez cache lub akcelerator taki jak Zend OPcache lub eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Twoja baza danych nie działa z poziomem izolacji transakcji \"READ COMMITTED\". Może to powodować problemy kiedy wiele akcji będzie wykonywanych równolegle.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "Zainstalowana wersja %2$s jest starsza niż %1$s. Ze względów stabilności i wydajności zalecamy aktualizację do nowszej wersji %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Brak modułu PHP 'fileinfo'.  Zalecamy włączenie tego modułu, aby uzyskać najlepsze wyniki przy rozpoznawaniu typów MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakcyjne blokowanie plików jest wyłączone. Może to powodować problemy w działaniu. Włącz 'filelocking.enabled' w config.php, aby rozwiązać te problemy. Sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>, aby uzyskać więcej informacji.",
     "System locale can not be set to a one which supports UTF-8." : "Ustawienia regionalne systemu nie można ustawić na jeden, który obsługuje UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Oznacza to, że mogą być problemy z pewnymi znakami w nazwach plików.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Mocno sugerujemy, aby doinstalować do systemu wymagane pakiety, wspierające następujące języki: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Twoja instancja nie jest zainstalowana w katalogu głównym dla domeny, a używasz systemowego Cron'a, zatem mogą wystąpić kłopoty w poprawnym generowaniu URL'a. Aby zapobiec problemów ustaw proszę opcję \"overwrite.cli.url\" w Twoim pliku config.php do katalogu głównego Twojej instalacji (sugerowany: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nie było możliwe uruchomienie zadania cron przy pomocy CLI. Pojawił się następujący błąd techniczny: ",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Proszę sprawdzić dokładnie <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">przewodniki instalacji ↗</a> oraz błędy i ostrzeżenia w <a href=\"%s\">logu</a>.",
     "All checks passed." : "Wszystkie testy konfiguracji zakończyły się pomyślnie.",
     "Background jobs" : "Zadania w tle",
     "Last job ran %s." : "Ostatnie zadanie wykonano %s",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Dostępnych jest wiele funkcji i ustawień pozwalających na optymalne skonfigurowanie i używanie tej instancji. Tutaj uzyskasz więcej informacji.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite jest aktualnie używany jako baza danych. Dla większych instalacji zalecamy przełączenie na inną bazę danych.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Jest to szczególnie zalecane w przypadku korzystania z desktopowego klienta do synchronizacji plików.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Aby zmigrować do innej bazy danych użyj narzędzia z terminala: \"occ db:convert-type\" albo sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>.",
     "How to do backups" : "Jak zrobić kopie zapasowe",
     "Advanced monitoring" : "Zaawansowane monitorowanie",
     "Performance tuning" : "Podnoszenie wydajności",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Wygląda na to, że ustawienia PHP ucinają bloki wklejonych dokumentów. To sprawi, że niektóre wbudowane aplikacje będą niedostępne.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s jest zainstalowany poniżej wersji %2$s. Zalecamy podniesienie %1$s do wersji nowszej ze względu na stabilność i wydajność.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Brak modułu PHP „fileinfo”. Zalecamy włączenie tego modułu, aby uzyskać najlepsze wyniki podczas wykrywania typów MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Transakcyjne blokowanie plików jest wyłączone. Może to powodować problemy w działaniu. Włącz 'filelocking.enabled' w config.php, aby rozwiązać te problemy. Sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>, aby uzyskać więcej informacji.",
     "This means that there might be problems with certain characters in file names." : "Oznacza to, że mogą być problemy z niektórymi znakami w nazwach plików.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Zalecamy instalację na Twoim systemie komponentów wymaganych do obsługi języków: %s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Jeśli twoja instalacja nie jest zainstalowana w katalogu root domeny i używa systemowego crona, mogą wystąpić problemy z tworzeniem adresów URL. Aby rozwiązać ten problem, proszę ustawić w swoim pliku config.php opcję \"overwrite.cli.url\" wskazując ścieżkę instalacji (sugerujemy: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Nie było możliwe do wykonania przez cron CLI. Pojawiły się następujące błędy techniczne:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Proszę sprawdzić dokładnie <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">przewodniki instalacji ↗</a> oraz błędy i ostrzeżenia w <a href=\"%s\">logu</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Ostatnie wykonanie zadania przez cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Ostatnie wykonanie zadania przez cron: %s. Wydaje się, że coś jest błędne.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Użyj systemowej usługi cron do wywoływania cron.php co 15 minut.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Aby to uruchomić potrzebujesz rozszerzenia posix do PHP. Po więcej informacji sprawdź {linkstart}dokumentację PHP{linkend}.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Pozwól użytkownikowi na autouzupełnianie w oknie użytkownika. Jeśli ta opcja jest wyłączona, to pełna nazwa musi być wprowadzona.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Aby zmigrować do innej bazy danych użyj narzędzia z terminala: \"occ db:convert-type\" albo sprawdź <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentację ↗</a>.",
     "Uninstall app" : "Odinstaluj aplikację",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hej,<br><br>informujemy cię, że posiadasz od teraz konto %s.<br><br>Twoja nazwa użytkownika: <strong>%s</strong><br>Zaloguj się: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Pozdrawiam!",
diff --git a/settings/l10n/pt_BR.js b/settings/l10n/pt_BR.js
index f2012354a08..f1aa39c7f06 100644
--- a/settings/l10n/pt_BR.js
+++ b/settings/l10n/pt_BR.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Segurança & avisos de configuração",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "É importante para a segurança e desempenho de sua instância que tudo esteja configurado corretamente. Para ajudar você com isso que estamos fazendo algumas verificações automáticas. Por favor, consulte a seção Dicas & Truques e a documentação para obter mais informações.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "O PHP não parece ser configurado corretamente para consultar variáveis de ambiente do sistema. O teste com getenv(\"PATH\") apenas retorna uma resposta vazia.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Verifique a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação de instalação ↗</a> para os detalhes de configuração do PHP e a configuração do PHP do seu servidor, especialmente ao usar o php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "A configuração Somente-Leitura foi habilitada. Isso impede que algumas configurações sejam definidas via interface web. Além disso, o arquivo precisa ser definido manualmente com permissão de escrita para cada atualização.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "O PHP aparentemente está configurado para remover blocos de documentos em linha. Isso fará com que vários aplicativos principais fiquem inacessíveis.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Isso provavelmente é causado por um cache/acelerador, como Zend OPcache ou eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Seu banco de dados não está em execução com o nível de isolamento de transação \"READ COMITTED\". Isso poderá causar problemas quando várias ações são executadas em paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : " %1$s a versão abaixo %2$s está instalada. Por razões de estabilidade e desempenho, é recomendável atualizar para a versão mais recente, %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "O módulo PHP 'fileinfo' está faltando. É altamente recomendável habilitar este módulo para obter os melhores resultados com detecção de tipo MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "O bloqueio de arquivo transacional está desativado. Isso pode levar a problemas com as condições de corrida. Ative 'filelocking.enabled' em config.php para evitar estes problemas. Veja a  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informações.",
     "System locale can not be set to a one which supports UTF-8." : "Localização do sistema não pôde ser definido para um que suporta UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Isso significa que pode haver problemas com determinados caracteres em nomes de arquivos.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Sugerimos fortemente instalar os pacotes necessários no seu sistema para suportar uma das seguintes localizações: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se a sua instalação não estiver instalada na raiz do domínio e usar o sistema Cron, pode haver problemas com a geração de URL. Para evitar esses problemas, configure a opção \"overwrite.cli.url\" no seu arquivo config.php para o caminho webroot da sua instalação (Sugestão: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Não foi possível executar o trabalho cron através da CLI. Os seguintes erros técnicos apareceram:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor verifique os  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guias de instalação ↗</a> e verifique qualquer erro ou advertência no <a href=\"%s\">log</a>.",
     "All checks passed." : "Todas as verificações passaram.",
     "Background jobs" : "Tarefas em segundo plano",
     "Last job ran %s." : "Última tarefa rodou há %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Há muitos recursos e opções de configuração para otimização e uso. Aqui estão algumas indicações para obter mais informações.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite é usando atualmente como Plataforma de serviço de banco de dados. Para instalações maiores recomendamos que você use uma outra plataforma de serviço de banco de dados",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Isso é particulamente recomendado quando se utiliza um cliente para sincronização.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro banco de dados use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a>.",
     "How to do backups" : "Como fazer backups",
     "Advanced monitoring" : "Monitoramento avançado",
     "Performance tuning" : "Ajustando a performance",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "O PHP aparentemente está configurado para retirar blocos doc inline. Isso fará com que vários aplicativos do núcleo fiquem inacessíveis.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s abaixo da versão %2$s está instalado. Por razões de estabilidade e desempenho recomendamos a atualização para a nova versão %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "O módulo PHP 'fileinfo' está faltando. Recomendamos que ative este módulo para obter melhores resultados com a detecção de mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "O bloqueio de arquivo transacional está desativado. Isso pode levar a problemas com as condições de corrida. Ative 'filelocking.enabled' em config.php para evitar estes problemas. Veja a  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informações.",
     "This means that there might be problems with certain characters in file names." : "Isso significa que pode haver problemas com certos caracteres em nomes de arquivo.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Nós sugerimos a instalação dos pacotes necessários em seu sistema para suportar um dos seguintes locais: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se a sua instalação não estiver instalada na raiz do domínio e usa o Cron do sistema, pode haver problema com a geração da URL. Para evitar estes problemas, por favor, defina a opção \"overwrite.cli.url\" em seu arquivo config.php para o caminho webroot de sua instalação (Sugestão: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Não foi possível executar o cron via CLI. Os seguintes erros ocorreram:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor verifique os  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guias de instalação ↗</a> e verifique qualquer erro ou advertência no <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última execução do trabalho Cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última execução do trabalho Cron: %s. Algo parece errado.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar o serviço cron do sistema para chamar o arquivo cron.php a cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para rodar isso você precisa da extensão posix PHP. Veja a {linkstart}documentação PHP{linkend} para mais detalhes.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir autocompletar o nome do usuário no diálogo de compartilhamento. Se desativado, o nome completo precisa ser inserido.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro banco de dados use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a>.",
     "Uninstall app" : "Desinstalar aplicativo",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Olá,<br><br>só para lhe informar que agora você tem uma %s conta.<br><br>Seu nome de usuário: <strong>%s</strong><br>Acesse: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Saudações!",
diff --git a/settings/l10n/pt_BR.json b/settings/l10n/pt_BR.json
index 17b4149950f..1ae95a3a645 100644
--- a/settings/l10n/pt_BR.json
+++ b/settings/l10n/pt_BR.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Segurança & avisos de configuração",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "É importante para a segurança e desempenho de sua instância que tudo esteja configurado corretamente. Para ajudar você com isso que estamos fazendo algumas verificações automáticas. Por favor, consulte a seção Dicas & Truques e a documentação para obter mais informações.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "O PHP não parece ser configurado corretamente para consultar variáveis de ambiente do sistema. O teste com getenv(\"PATH\") apenas retorna uma resposta vazia.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Verifique a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação de instalação ↗</a> para os detalhes de configuração do PHP e a configuração do PHP do seu servidor, especialmente ao usar o php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "A configuração Somente-Leitura foi habilitada. Isso impede que algumas configurações sejam definidas via interface web. Além disso, o arquivo precisa ser definido manualmente com permissão de escrita para cada atualização.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "O PHP aparentemente está configurado para remover blocos de documentos em linha. Isso fará com que vários aplicativos principais fiquem inacessíveis.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Isso provavelmente é causado por um cache/acelerador, como Zend OPcache ou eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Seu banco de dados não está em execução com o nível de isolamento de transação \"READ COMITTED\". Isso poderá causar problemas quando várias ações são executadas em paralelo.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : " %1$s a versão abaixo %2$s está instalada. Por razões de estabilidade e desempenho, é recomendável atualizar para a versão mais recente, %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "O módulo PHP 'fileinfo' está faltando. É altamente recomendável habilitar este módulo para obter os melhores resultados com detecção de tipo MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "O bloqueio de arquivo transacional está desativado. Isso pode levar a problemas com as condições de corrida. Ative 'filelocking.enabled' em config.php para evitar estes problemas. Veja a  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informações.",
     "System locale can not be set to a one which supports UTF-8." : "Localização do sistema não pôde ser definido para um que suporta UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Isso significa que pode haver problemas com determinados caracteres em nomes de arquivos.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Sugerimos fortemente instalar os pacotes necessários no seu sistema para suportar uma das seguintes localizações: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se a sua instalação não estiver instalada na raiz do domínio e usar o sistema Cron, pode haver problemas com a geração de URL. Para evitar esses problemas, configure a opção \"overwrite.cli.url\" no seu arquivo config.php para o caminho webroot da sua instalação (Sugestão: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Não foi possível executar o trabalho cron através da CLI. Os seguintes erros técnicos apareceram:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor verifique os  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guias de instalação ↗</a> e verifique qualquer erro ou advertência no <a href=\"%s\">log</a>.",
     "All checks passed." : "Todas as verificações passaram.",
     "Background jobs" : "Tarefas em segundo plano",
     "Last job ran %s." : "Última tarefa rodou há %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Há muitos recursos e opções de configuração para otimização e uso. Aqui estão algumas indicações para obter mais informações.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite é usando atualmente como Plataforma de serviço de banco de dados. Para instalações maiores recomendamos que você use uma outra plataforma de serviço de banco de dados",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Isso é particulamente recomendado quando se utiliza um cliente para sincronização.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro banco de dados use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a>.",
     "How to do backups" : "Como fazer backups",
     "Advanced monitoring" : "Monitoramento avançado",
     "Performance tuning" : "Ajustando a performance",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "O PHP aparentemente está configurado para retirar blocos doc inline. Isso fará com que vários aplicativos do núcleo fiquem inacessíveis.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s abaixo da versão %2$s está instalado. Por razões de estabilidade e desempenho recomendamos a atualização para a nova versão %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "O módulo PHP 'fileinfo' está faltando. Recomendamos que ative este módulo para obter melhores resultados com a detecção de mime-type.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "O bloqueio de arquivo transacional está desativado. Isso pode levar a problemas com as condições de corrida. Ative 'filelocking.enabled' em config.php para evitar estes problemas. Veja a  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informações.",
     "This means that there might be problems with certain characters in file names." : "Isso significa que pode haver problemas com certos caracteres em nomes de arquivo.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Nós sugerimos a instalação dos pacotes necessários em seu sistema para suportar um dos seguintes locais: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se a sua instalação não estiver instalada na raiz do domínio e usa o Cron do sistema, pode haver problema com a geração da URL. Para evitar estes problemas, por favor, defina a opção \"overwrite.cli.url\" em seu arquivo config.php para o caminho webroot de sua instalação (Sugestão: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Não foi possível executar o cron via CLI. Os seguintes erros ocorreram:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Por favor verifique os  <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">guias de instalação ↗</a> e verifique qualquer erro ou advertência no <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Última execução do trabalho Cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Última execução do trabalho Cron: %s. Algo parece errado.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar o serviço cron do sistema para chamar o arquivo cron.php a cada 15 minutos.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Para rodar isso você precisa da extensão posix PHP. Veja a {linkstart}documentação PHP{linkend} para mais detalhes.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir autocompletar o nome do usuário no diálogo de compartilhamento. Se desativado, o nome completo precisa ser inserido.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro banco de dados use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a>.",
     "Uninstall app" : "Desinstalar aplicativo",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Olá,<br><br>só para lhe informar que agora você tem uma %s conta.<br><br>Seu nome de usuário: <strong>%s</strong><br>Acesse: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Saudações!",
diff --git a/settings/l10n/pt_PT.js b/settings/l10n/pt_PT.js
index 1793753c2db..a37d7596f29 100644
--- a/settings/l10n/pt_PT.js
+++ b/settings/l10n/pt_PT.js
@@ -166,7 +166,6 @@ OC.L10N.register(
     "Security & setup warnings" : "Avisos de configuração e segurança",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "A configuração Só-de-Leitura foi ativada. Isto evita definir algumas configurações através da interface da Web. Além disso, o ficheiro precisa de ser definido gravável manualmente para cada atualização.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Isto é provavelmente causado por uma cache/acelerador como o Zend OPcache or eAcelerador.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Bloqueio de arquivos transacionais está desativado, isto poderá levar a problemas com condições de corrida. Ative 'filelocking.enabled' no config.php para evitar estes problemas. Consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informação.",
     "System locale can not be set to a one which supports UTF-8." : "Não é possível definir a internacionalização do sistema para um que suporte o UTF-8.",
     "All checks passed." : "Todas as verificações passaram.",
     "Execute one task with each page loaded" : "Executar uma tarefa com cada página carregada",
@@ -186,7 +185,6 @@ OC.L10N.register(
     "Exclude groups from sharing" : "Excluir grupos das partilhas",
     "These groups will still be able to receive shares, but not to initiate them." : "Estes grupos poderão receber partilhas, mas não poderão iniciá-las.",
     "Tips & tricks" : "Dicas e truques",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro tipo de base de dados, use a ferramenta de comando de linha: 'occ db:convert-type', ou veja a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação↗</a>.",
     "How to do backups" : "Como fazer cópias de segurança",
     "Advanced monitoring" : "Monitorização avançada",
     "Performance tuning" : "Ajuste de desempenho",
@@ -269,6 +267,7 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "O PHP está aparentemente configurado para remover blocos doc em linha. Isto vai tornar inacessíveis várias aplicações básicas.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s abaixo da versão %2$s está instalado. Por motivos de estabilidade e desempenho, recomendamos que atualize para a nova versão %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "O Módulo PHP 'fileinfo' não se encontra instalado/activado. É fortemente recomendado que active este módulo para obter os melhores resultado com a detecção dos tipos de mime.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Bloqueio de arquivos transacionais está desativado, isto poderá levar a problemas com condições de corrida. Ative 'filelocking.enabled' no config.php para evitar estes problemas. Consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informação.",
     "This means that there might be problems with certain characters in file names." : "Isto significa que podem haver problemas com alguns caracteres nos nomes dos ficheiros.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Nós recomendamos fortemente que instale no seu sistema os pacotes necessários para suportar uma das seguintes locallidades: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se a sua instalação não está instalada na raiz do domínio e usa o sistema cron, pode haver problemas com a geração de URL. Para evitar esses problemas, por favor, defina a opção \"overwrite.cli.url\" no ficheiro config.php para o caminho webroot da sua instalação (Sugestão: \"%s\")",
@@ -280,6 +279,7 @@ OC.L10N.register(
     "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php está registado num serviço webcron para chamar a página cron.php por http a cada 15 minutos.",
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar o serviço cron do sistema para ligar o ficheiro cron.php a cada 15 minutos.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir o auto-completar de nome de utilizador no diálogo da partilha. Se isto for desativado, será necessário preencher o nome de utilizador completo.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro tipo de base de dados, use a ferramenta de comando de linha: 'occ db:convert-type', ou veja a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação↗</a>.",
     "Uninstall app" : "Desinstalar app",
     "Cheers!" : "Parabéns!",
     "For password recovery and notifications" : "Para recuperação da palavra-passe e notificações",
diff --git a/settings/l10n/pt_PT.json b/settings/l10n/pt_PT.json
index cc2eab3342e..2527fe16be5 100644
--- a/settings/l10n/pt_PT.json
+++ b/settings/l10n/pt_PT.json
@@ -164,7 +164,6 @@
     "Security & setup warnings" : "Avisos de configuração e segurança",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "A configuração Só-de-Leitura foi ativada. Isto evita definir algumas configurações através da interface da Web. Além disso, o ficheiro precisa de ser definido gravável manualmente para cada atualização.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Isto é provavelmente causado por uma cache/acelerador como o Zend OPcache or eAcelerador.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Bloqueio de arquivos transacionais está desativado, isto poderá levar a problemas com condições de corrida. Ative 'filelocking.enabled' no config.php para evitar estes problemas. Consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informação.",
     "System locale can not be set to a one which supports UTF-8." : "Não é possível definir a internacionalização do sistema para um que suporte o UTF-8.",
     "All checks passed." : "Todas as verificações passaram.",
     "Execute one task with each page loaded" : "Executar uma tarefa com cada página carregada",
@@ -184,7 +183,6 @@
     "Exclude groups from sharing" : "Excluir grupos das partilhas",
     "These groups will still be able to receive shares, but not to initiate them." : "Estes grupos poderão receber partilhas, mas não poderão iniciá-las.",
     "Tips & tricks" : "Dicas e truques",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro tipo de base de dados, use a ferramenta de comando de linha: 'occ db:convert-type', ou veja a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação↗</a>.",
     "How to do backups" : "Como fazer cópias de segurança",
     "Advanced monitoring" : "Monitorização avançada",
     "Performance tuning" : "Ajuste de desempenho",
@@ -267,6 +265,7 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "O PHP está aparentemente configurado para remover blocos doc em linha. Isto vai tornar inacessíveis várias aplicações básicas.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s abaixo da versão %2$s está instalado. Por motivos de estabilidade e desempenho, recomendamos que atualize para a nova versão %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "O Módulo PHP 'fileinfo' não se encontra instalado/activado. É fortemente recomendado que active este módulo para obter os melhores resultado com a detecção dos tipos de mime.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Bloqueio de arquivos transacionais está desativado, isto poderá levar a problemas com condições de corrida. Ative 'filelocking.enabled' no config.php para evitar estes problemas. Consulte a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação ↗</a> para mais informação.",
     "This means that there might be problems with certain characters in file names." : "Isto significa que podem haver problemas com alguns caracteres nos nomes dos ficheiros.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Nós recomendamos fortemente que instale no seu sistema os pacotes necessários para suportar uma das seguintes locallidades: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Se a sua instalação não está instalada na raiz do domínio e usa o sistema cron, pode haver problemas com a geração de URL. Para evitar esses problemas, por favor, defina a opção \"overwrite.cli.url\" no ficheiro config.php para o caminho webroot da sua instalação (Sugestão: \"%s\")",
@@ -278,6 +277,7 @@
     "cron.php is registered at a webcron service to call cron.php every 15 minutes over http." : "cron.php está registado num serviço webcron para chamar a página cron.php por http a cada 15 minutos.",
     "Use system's cron service to call the cron.php file every 15 minutes." : "Usar o serviço cron do sistema para ligar o ficheiro cron.php a cada 15 minutos.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Permitir o auto-completar de nome de utilizador no diálogo da partilha. Se isto for desativado, será necessário preencher o nome de utilizador completo.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Para migrar para outro tipo de base de dados, use a ferramenta de comando de linha: 'occ db:convert-type', ou veja a <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentação↗</a>.",
     "Uninstall app" : "Desinstalar app",
     "Cheers!" : "Parabéns!",
     "For password recovery and notifications" : "Para recuperação da palavra-passe e notificações",
diff --git a/settings/l10n/ru.js b/settings/l10n/ru.js
index 330cc78f8c0..7c76109ace5 100644
--- a/settings/l10n/ru.js
+++ b/settings/l10n/ru.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Предупреждения безопасности и установки",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Для обеспечения безопасности и производительности важно, чтобы всё было настроено правильно. Чтобы помочь вам в этом, мы проводим некоторые автоматические проверки. Дополнительную информацию см. в разделе «Советы и рекомендации» и в документации.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP не настроен правильно для получения переменных системного окружения. Запрос getenv(\"PATH\") возвращает пустые результаты.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Обратитесь к <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации по установке ↗</a> для получения информации по настройке PHP на вашем сервере, особенно это касается php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Конфигурационный файл в режиме только для чтения. В связи с этим некоторые настройки веб-интерфейса невозможно изменить. Учтите, что для установки обновлений, вам потребуется самостоятельно разрешить запись в конфигурационный файл.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Очевидно, PHP настроен на вычищение блоков встроенной документации. Это сделает несколько центральных приложений недоступными.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Возможно это вызвано кешем/ускорителем вроде Zend OPcache или eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Ваша база данных не работает в режиме изоляции транзакций \"READ COMMITED\". Это может вызвать проблемы, если несколько действий выполняется одновременно.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s ниже установленной версии %2$s. Для улучшения стабильности и производительности рекомендуем обновиться до новой версии %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-модуль «fileinfo» отсутствует. Мы настоятельно рекомендуем включить этот модуль для улучшения определения типов (MIME-type) файлов.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Блокировка передаваемых файлов отключена, это может привести к состоянию гонки. Включите параметр 'filelocking.enabled' в файла config.php для решения проблемы. Обратитесь к <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a> для получения дополнительной информации.",
     "System locale can not be set to a one which supports UTF-8." : "Невозможно установить системную локаль, поддерживающую UTF-8",
     "This means that there might be problems with certain characters in filenames." : "Это значит, что могут быть проблемы с некоторыми символами в именах файлов.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Настойчиво рекомендуем установить требуемые пакеты для вашей системы для поддержки одного из следующих языков: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "В случае установки не в корне домена и использования  системного планировщика Cron возможны проблемы с правильной генерацией URL. Для их избежания, установите настройке  «overwrite.cli.url» в файле config.php значение,  равное пути папки установки. (Предположительно: «%s».)",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Не удаётся запустить задачу планировщика с использованием CLI (интерфейса командной строки). Произошли следующие технические ошибки:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Пожалуйста, еще раз внимательно прочитайте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">руководство по установке ↗</a> и проверьте <a href=\"%s\">журнал</a> на наличие ошибок.",
     "All checks passed." : "Все проверки пройдены.",
     "Background jobs" : "Фоновые задания",
     "Last job ran %s." : "Последнее задание выполнено %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Для оптимальной настройки и использования доступно множество возможностей и параметров конфигурации. Вот несколько указателей для получения дополнительной информации.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "В качестве базы данных используется SQLite. Для больших установок мы рекомендуем переключиться на другую серверную базу данных.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Рекомендуется при синхронизации файлов с использованием клиента для ПК.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Для миграции на другую базу данных используйте команду: 'occ db:convert-type' или обратитесь к a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a>.",
     "How to do backups" : "Как сделать резервные копии",
     "Advanced monitoring" : "Расширенный мониторинг",
     "Performance tuning" : "Настройка производительности",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Очевидно, PHP настроен на вычищение блоков встроенной документации. Это сделает несколько центральных приложений недоступными.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s ниже установленной версии %2$s, по причинам стабильности и производительности мы рекомендуем обновиться до новой версии %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP-модуль 'fileinfo' отсутствует. Мы настоятельно рекомендуем включить этот модуль для улучшения определения типов (mime-type) файлов.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Блокировка передаваемых файлов отключена, это может привести к состоянию гонки. Включите параметр 'filelocking.enabled' в файла config.php для решения проблемы. Обратитесь к <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a> для получения дополнительной информации.",
     "This means that there might be problems with certain characters in file names." : "Это значит, что могут быть проблемы с некоторыми символами в именах файлов.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Мы рекомендуем установить требуемые пакеты для вашей системы для поддержки одного из следующих языков: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Если ваша копия ownCloud установлена не в корне домена и использует системный планировщик cron, возможны проблемы с правильной генерацией URL. Чтобы избежать этого, установите опцию \"overwrite.cli.url\" в файле config.php равной пути папки установки. (Предположительно: \"%s\".)",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Не удается запустить задачу планировщика через CLI. Произошли следующие технические ошибки:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Пожалуйста, еще раз внимательно прочитайте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">руководство по установке ↗</a> и проверьте <a href=\"%s\">журнал</a> на наличие ошибок.",
     "Cron" : "Cron (планировщик задач)",
     "Last cron job execution: %s." : "Последнее выполненное задание планировщика: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Последнее выполненное задание планировщика: %s. Похоже, что-то не в порядке.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Использовать системный cron для вызова cron.php каждые 15 минут.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Для запуска вам необходимо расширение PHP posix. Для более подробной информации смотрите {linkstart}PHP документацию{linkend}",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Включить автоматическое завершение имен пользователей в окне общего доступа. Если отключено, то необходимо вводить полное имя вручную.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Для миграции на другую базу данных используйте команду: 'occ db:convert-type' или обратитесь к a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a>.",
     "Uninstall app" : "Удалить приложение",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Здравствуйте,<br><br>просто хотим сообщить, что теперь у вас есть учетная запись на %s.<br><br>Ваше имя пользователя: <strong>%s</strong><br>Зайти: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Удачи!",
diff --git a/settings/l10n/ru.json b/settings/l10n/ru.json
index 3ef3052a9ac..76592b5456f 100644
--- a/settings/l10n/ru.json
+++ b/settings/l10n/ru.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Предупреждения безопасности и установки",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Для обеспечения безопасности и производительности важно, чтобы всё было настроено правильно. Чтобы помочь вам в этом, мы проводим некоторые автоматические проверки. Дополнительную информацию см. в разделе «Советы и рекомендации» и в документации.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP не настроен правильно для получения переменных системного окружения. Запрос getenv(\"PATH\") возвращает пустые результаты.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Обратитесь к <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации по установке ↗</a> для получения информации по настройке PHP на вашем сервере, особенно это касается php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Конфигурационный файл в режиме только для чтения. В связи с этим некоторые настройки веб-интерфейса невозможно изменить. Учтите, что для установки обновлений, вам потребуется самостоятельно разрешить запись в конфигурационный файл.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Очевидно, PHP настроен на вычищение блоков встроенной документации. Это сделает несколько центральных приложений недоступными.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Возможно это вызвано кешем/ускорителем вроде Zend OPcache или eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Ваша база данных не работает в режиме изоляции транзакций \"READ COMMITED\". Это может вызвать проблемы, если несколько действий выполняется одновременно.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s ниже установленной версии %2$s. Для улучшения стабильности и производительности рекомендуем обновиться до новой версии %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-модуль «fileinfo» отсутствует. Мы настоятельно рекомендуем включить этот модуль для улучшения определения типов (MIME-type) файлов.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Блокировка передаваемых файлов отключена, это может привести к состоянию гонки. Включите параметр 'filelocking.enabled' в файла config.php для решения проблемы. Обратитесь к <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a> для получения дополнительной информации.",
     "System locale can not be set to a one which supports UTF-8." : "Невозможно установить системную локаль, поддерживающую UTF-8",
     "This means that there might be problems with certain characters in filenames." : "Это значит, что могут быть проблемы с некоторыми символами в именах файлов.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Настойчиво рекомендуем установить требуемые пакеты для вашей системы для поддержки одного из следующих языков: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "В случае установки не в корне домена и использования  системного планировщика Cron возможны проблемы с правильной генерацией URL. Для их избежания, установите настройке  «overwrite.cli.url» в файле config.php значение,  равное пути папки установки. (Предположительно: «%s».)",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Не удаётся запустить задачу планировщика с использованием CLI (интерфейса командной строки). Произошли следующие технические ошибки:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Пожалуйста, еще раз внимательно прочитайте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">руководство по установке ↗</a> и проверьте <a href=\"%s\">журнал</a> на наличие ошибок.",
     "All checks passed." : "Все проверки пройдены.",
     "Background jobs" : "Фоновые задания",
     "Last job ran %s." : "Последнее задание выполнено %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Для оптимальной настройки и использования доступно множество возможностей и параметров конфигурации. Вот несколько указателей для получения дополнительной информации.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "В качестве базы данных используется SQLite. Для больших установок мы рекомендуем переключиться на другую серверную базу данных.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Рекомендуется при синхронизации файлов с использованием клиента для ПК.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Для миграции на другую базу данных используйте команду: 'occ db:convert-type' или обратитесь к a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a>.",
     "How to do backups" : "Как сделать резервные копии",
     "Advanced monitoring" : "Расширенный мониторинг",
     "Performance tuning" : "Настройка производительности",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Очевидно, PHP настроен на вычищение блоков встроенной документации. Это сделает несколько центральных приложений недоступными.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s ниже установленной версии %2$s, по причинам стабильности и производительности мы рекомендуем обновиться до новой версии %1$s.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP-модуль 'fileinfo' отсутствует. Мы настоятельно рекомендуем включить этот модуль для улучшения определения типов (mime-type) файлов.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Блокировка передаваемых файлов отключена, это может привести к состоянию гонки. Включите параметр 'filelocking.enabled' в файла config.php для решения проблемы. Обратитесь к <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a> для получения дополнительной информации.",
     "This means that there might be problems with certain characters in file names." : "Это значит, что могут быть проблемы с некоторыми символами в именах файлов.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Мы рекомендуем установить требуемые пакеты для вашей системы для поддержки одного из следующих языков: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Если ваша копия ownCloud установлена не в корне домена и использует системный планировщик cron, возможны проблемы с правильной генерацией URL. Чтобы избежать этого, установите опцию \"overwrite.cli.url\" в файле config.php равной пути папки установки. (Предположительно: \"%s\".)",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Не удается запустить задачу планировщика через CLI. Произошли следующие технические ошибки:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Пожалуйста, еще раз внимательно прочитайте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">руководство по установке ↗</a> и проверьте <a href=\"%s\">журнал</a> на наличие ошибок.",
     "Cron" : "Cron (планировщик задач)",
     "Last cron job execution: %s." : "Последнее выполненное задание планировщика: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Последнее выполненное задание планировщика: %s. Похоже, что-то не в порядке.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Использовать системный cron для вызова cron.php каждые 15 минут.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Для запуска вам необходимо расширение PHP posix. Для более подробной информации смотрите {linkstart}PHP документацию{linkend}",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Включить автоматическое завершение имен пользователей в окне общего доступа. Если отключено, то необходимо вводить полное имя вручную.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Для миграции на другую базу данных используйте команду: 'occ db:convert-type' или обратитесь к a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документации ↗</a>.",
     "Uninstall app" : "Удалить приложение",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Здравствуйте,<br><br>просто хотим сообщить, что теперь у вас есть учетная запись на %s.<br><br>Ваше имя пользователя: <strong>%s</strong><br>Зайти: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Удачи!",
diff --git a/settings/l10n/sq.js b/settings/l10n/sq.js
index ab141131c0f..0c6457114fc 100644
--- a/settings/l10n/sq.js
+++ b/settings/l10n/sq.js
@@ -248,20 +248,17 @@ OC.L10N.register(
     "Start migration" : "Fillo migrimin",
     "Security & setup warnings" : "Sinjalizime sigurie & rregullimi",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP-ja nuk duket të jetë ngritur si duhet për të kërkuar ndryshore mjedisi sistemi. Testi me getenv(\"PATH\") kthen vetëm një përgjigje të zbrazët.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Ju lutem kontrolloni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumentacionin e instalimit ↗ </a> për shënimet e konfigurimit te PHP-se dhe për konfigurimin PHP të serverit tuaj, veçanërisht kur përdoret php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Rregullimi Vetëm-Lexim u aktivizua. Kjo parandalon rregullimin e disa parametrave përmes ndërfaqes web. Më tej, për çdo përditësim kartela lyp të kalohet dorazi si e shkrueshme.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Mesa duket PHP është ngritur për të zhveshur blloqet e inline doc. Kjo do të bëjë disa aplikacione bazë të paaksesueshme.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Kjo ka gjasa të jetë shkaktuar nga një fshehtinë/përshpejtues i tillë si Zend OPcache ose eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Baza juaj e të dhënave nuk ekzekutohet me nivelin \"READ COMMITED\" e izolimit për ndërveprimet. Kjo mund të shkaktojë probleme, kur kryhen paralelisht disa veprime njëherësh.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s versioni i mëposhtëm %2$sështë instaluar,  për arsye qëndrueshmërie dhe performance është e rekomanduar të përditësohet në një version më të ri %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Moduli PHP 'fileinfo' mungon. Ne ju rekomandojmë që të mundësohet ky modul për të marrë rezultatet më të mira me zbulimin e llojit MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Kyçja e kartelave gjatë transaksioneve është e çaktivizuar, kjo mund të sjellë probleme me gjendje <em>race conditions</em>. Që të shmangni këto probleme, aktivizoni 'filelocking.enabled' te config.php. Për më tepër të dhëna, shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Si vendore sistemi nuk mund të caktohet një që mbulon UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Kjo do të thotë që mund të ketë probleme me disa karaktere në emrat e skedarëve.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Propozohrt që të instaloni paketat e kërkuara në sistemin tuaj për të mbështetur një nga lokacionet e mëposhtme: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Nëse instalimi juaj nuk është bërë në rrënjë të përkatësisë dhe përdor cron sistemi, mund të ketë probleme me prodhimin e URL-së. Që të shmangen këto probleme, ju lutemi, jepini mundësisë \"overwrite.cli.url\" te kartela juaj config.php vlerën e shtegut webroot të instalimit tuaj (E këshillueshme: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nuk ishte e mundur që të ekzekutohej puna cron nëpërmjet CLI. Gabimet teknike në vijim janë shfaqur :",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Ju lutem riverifikoni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> udhëzuesin e instalimit </a>,, dhe kontrolloni për ndonjë gabim apo njoftim paraprak në  <a href=\"%s\">log</a>.",
     "All checks passed." : "I kaloi krejt kontrollet.",
     "Background jobs" : "Punët në background",
     "Last job ran %s." : "Puna e fundit vazhdoi %s.",
@@ -296,7 +293,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Ekzistojnë shumë funksione dhe çelësa të konfigurimit që janë në dispozicion për të përshtatur dhe përdorur në mënyrë optimale këtë shembull. Këtu janë disa udhëzues për më shumë informacion.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite po përdoret si bazë të dhënash e programit klient. Për instalime më të ngarkuara, këshillojmë të kalohet në një program tjetër klient baze të dhënash.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Kjo është veçanërisht e rekomanduar gjatë  përdorimit  të desktopit të klientit për sinkronizimin skedari. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Për të kaluar te një tjetër bazë të dhënash përdorni mjetin rresht urdhrash: 'occ db:convert-type', ose shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "How to do backups" : "Si të bëhen kopjeruajtje",
     "Advanced monitoring" : "Mbikëqyrje e mëtejshme",
     "Performance tuning" : "Përimtime performance",
@@ -403,10 +399,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Duket se PHP-ja është rregulluar që të heqë blloqe të brendshme dokumentimi. Kjo do t’i bëjë të papërdrshme disa aplikacione bazë.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "Ka të instaluar %1$s nën versionin %2$s, për arsye qëndrueshmërie dhe performance këshillojmë të përditësohet me një version %1$s më të ri.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Moduli PHP 'fileinfo' mungon. Ju këshillojmë me forcë ta aktivizoni këtë modul, për të patur përfundimet më të mira në zbulim llojesh MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Kyçja e kartelave gjatë transaksioneve është e çaktivizuar, kjo mund të sjellë probleme me gjendje <em>race conditions</em>. Që të shmangni këto probleme, aktivizoni 'filelocking.enabled' te config.php. Për më tepër të dhëna, shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "Kjo do të thotë që mund të ketë probleme me disa shenja në emra kartelash.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Këshillojmë me forcë instalimin në sistemin tuaj të paketave të domosdoshme për mbulim të një prej vendoreve vijuese: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Nëse instalimi juaj nuk është bërë në rrënjë të përkatësisë dhe përdor cron sistemi, mund të ketë probleme me prodhimin e URL-së. Që të shmangen këto probleme, ju lutemi, jepini mundësisë \"overwrite.cli.url\" te kartela juaj config.php vlerën e shtegut webroot të instalimit tuaj (E këshillueshme: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "S’qe e mundur të përmbushej akti cron përmes CLI-së. U shfaqën gabimet teknike vijuese:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Ju lutem riverifikoni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> udhëzuesin e instalimit </a>,, dhe kontrolloni për ndonjë gabim apo njoftim paraprak në  <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Përmbushja e fundit e aktit cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Përmbushja e fundit e aktit cron: %s. Duket se nuk shkon diçka.",
@@ -415,6 +413,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Përdorni shërbimin cron të sistemit që ta aktivizojë cron.php-në çdo 15 minuta.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Për të bërë këtë ekzekutim ju duhet shtesa PHP posix. Shikoni  {linkstart} dokumentacionin e PHP {linkend} pë më shumë detaje.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Lejo vetëplotësim emra përdoruesish te dialogu i ndarjeve me të tjerët. Nëse kjo është e çaktivizuar, do të duhet të jepen emra përdoruesish.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Për të kaluar te një tjetër bazë të dhënash përdorni mjetin rresht urdhrash: 'occ db:convert-type', ose shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "Uninstall app" : "Çinstaloje Aplikacionin",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Njatjeta,<br><br>thjesht po ju bëjmë të ditur që tani keni një llogari %s.<br><br>Emri juaj i përdoruesit: <strong>%s</strong><br> Hyni në të te: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Gëzuar!",
diff --git a/settings/l10n/sq.json b/settings/l10n/sq.json
index 09d8665773f..e01f6671c78 100644
--- a/settings/l10n/sq.json
+++ b/settings/l10n/sq.json
@@ -246,20 +246,17 @@
     "Start migration" : "Fillo migrimin",
     "Security & setup warnings" : "Sinjalizime sigurie & rregullimi",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP-ja nuk duket të jetë ngritur si duhet për të kërkuar ndryshore mjedisi sistemi. Testi me getenv(\"PATH\") kthen vetëm një përgjigje të zbrazët.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Ju lutem kontrolloni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumentacionin e instalimit ↗ </a> për shënimet e konfigurimit te PHP-se dhe për konfigurimin PHP të serverit tuaj, veçanërisht kur përdoret php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Rregullimi Vetëm-Lexim u aktivizua. Kjo parandalon rregullimin e disa parametrave përmes ndërfaqes web. Më tej, për çdo përditësim kartela lyp të kalohet dorazi si e shkrueshme.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "Mesa duket PHP është ngritur për të zhveshur blloqet e inline doc. Kjo do të bëjë disa aplikacione bazë të paaksesueshme.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Kjo ka gjasa të jetë shkaktuar nga një fshehtinë/përshpejtues i tillë si Zend OPcache ose eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Baza juaj e të dhënave nuk ekzekutohet me nivelin \"READ COMMITED\" e izolimit për ndërveprimet. Kjo mund të shkaktojë probleme, kur kryhen paralelisht disa veprime njëherësh.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s versioni i mëposhtëm %2$sështë instaluar,  për arsye qëndrueshmërie dhe performance është e rekomanduar të përditësohet në një version më të ri %1$s.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Moduli PHP 'fileinfo' mungon. Ne ju rekomandojmë që të mundësohet ky modul për të marrë rezultatet më të mira me zbulimin e llojit MIME.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Kyçja e kartelave gjatë transaksioneve është e çaktivizuar, kjo mund të sjellë probleme me gjendje <em>race conditions</em>. Që të shmangni këto probleme, aktivizoni 'filelocking.enabled' te config.php. Për më tepër të dhëna, shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "System locale can not be set to a one which supports UTF-8." : "Si vendore sistemi nuk mund të caktohet një që mbulon UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Kjo do të thotë që mund të ketë probleme me disa karaktere në emrat e skedarëve.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Propozohrt që të instaloni paketat e kërkuara në sistemin tuaj për të mbështetur një nga lokacionet e mëposhtme: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Nëse instalimi juaj nuk është bërë në rrënjë të përkatësisë dhe përdor cron sistemi, mund të ketë probleme me prodhimin e URL-së. Që të shmangen këto probleme, ju lutemi, jepini mundësisë \"overwrite.cli.url\" te kartela juaj config.php vlerën e shtegut webroot të instalimit tuaj (E këshillueshme: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Nuk ishte e mundur që të ekzekutohej puna cron nëpërmjet CLI. Gabimet teknike në vijim janë shfaqur :",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Ju lutem riverifikoni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> udhëzuesin e instalimit </a>,, dhe kontrolloni për ndonjë gabim apo njoftim paraprak në  <a href=\"%s\">log</a>.",
     "All checks passed." : "I kaloi krejt kontrollet.",
     "Background jobs" : "Punët në background",
     "Last job ran %s." : "Puna e fundit vazhdoi %s.",
@@ -294,7 +291,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Ekzistojnë shumë funksione dhe çelësa të konfigurimit që janë në dispozicion për të përshtatur dhe përdorur në mënyrë optimale këtë shembull. Këtu janë disa udhëzues për më shumë informacion.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite po përdoret si bazë të dhënash e programit klient. Për instalime më të ngarkuara, këshillojmë të kalohet në një program tjetër klient baze të dhënash.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Kjo është veçanërisht e rekomanduar gjatë  përdorimit  të desktopit të klientit për sinkronizimin skedari. ",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Për të kaluar te një tjetër bazë të dhënash përdorni mjetin rresht urdhrash: 'occ db:convert-type', ose shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "How to do backups" : "Si të bëhen kopjeruajtje",
     "Advanced monitoring" : "Mbikëqyrje e mëtejshme",
     "Performance tuning" : "Përimtime performance",
@@ -401,10 +397,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "Duket se PHP-ja është rregulluar që të heqë blloqe të brendshme dokumentimi. Kjo do t’i bëjë të papërdrshme disa aplikacione bazë.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "Ka të instaluar %1$s nën versionin %2$s, për arsye qëndrueshmërie dhe performance këshillojmë të përditësohet me një version %1$s më të ri.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Moduli PHP 'fileinfo' mungon. Ju këshillojmë me forcë ta aktivizoni këtë modul, për të patur përfundimet më të mira në zbulim llojesh MIME.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Kyçja e kartelave gjatë transaksioneve është e çaktivizuar, kjo mund të sjellë probleme me gjendje <em>race conditions</em>. Që të shmangni këto probleme, aktivizoni 'filelocking.enabled' te config.php. Për më tepër të dhëna, shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "This means that there might be problems with certain characters in file names." : "Kjo do të thotë që mund të ketë probleme me disa shenja në emra kartelash.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Këshillojmë me forcë instalimin në sistemin tuaj të paketave të domosdoshme për mbulim të një prej vendoreve vijuese: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Nëse instalimi juaj nuk është bërë në rrënjë të përkatësisë dhe përdor cron sistemi, mund të ketë probleme me prodhimin e URL-së. Që të shmangen këto probleme, ju lutemi, jepini mundësisë \"overwrite.cli.url\" te kartela juaj config.php vlerën e shtegut webroot të instalimit tuaj (E këshillueshme: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "S’qe e mundur të përmbushej akti cron përmes CLI-së. U shfaqën gabimet teknike vijuese:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Ju lutem riverifikoni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> udhëzuesin e instalimit </a>,, dhe kontrolloni për ndonjë gabim apo njoftim paraprak në  <a href=\"%s\">log</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Përmbushja e fundit e aktit cron: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Përmbushja e fundit e aktit cron: %s. Duket se nuk shkon diçka.",
@@ -413,6 +411,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Përdorni shërbimin cron të sistemit që ta aktivizojë cron.php-në çdo 15 minuta.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Për të bërë këtë ekzekutim ju duhet shtesa PHP posix. Shikoni  {linkstart} dokumentacionin e PHP {linkend} pë më shumë detaje.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Lejo vetëplotësim emra përdoruesish te dialogu i ndarjeve me të tjerët. Nëse kjo është e çaktivizuar, do të duhet të jepen emra përdoruesish.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Për të kaluar te një tjetër bazë të dhënash përdorni mjetin rresht urdhrash: 'occ db:convert-type', ose shihni <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentimin ↗</a>.",
     "Uninstall app" : "Çinstaloje Aplikacionin",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Njatjeta,<br><br>thjesht po ju bëjmë të ditur që tani keni një llogari %s.<br><br>Emri juaj i përdoruesit: <strong>%s</strong><br> Hyni në të te: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Gëzuar!",
diff --git a/settings/l10n/sr.js b/settings/l10n/sr.js
index 963df384de9..12dd8032298 100644
--- a/settings/l10n/sr.js
+++ b/settings/l10n/sr.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Безбедносна и упозорења поставе",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Због безбедности и перформанси Ваше инстанце сервера, важно је да је све подешено исправно. Да бисмо Вам помогли у томе, радићемо неке аутоматске провере. Погледајте секцију са саветима и триковима, као и документацију за више информација.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP изгледа није исправно подешен да дохвата променљиве окружења. Тест са getenv(\"PATH\") враћа празну листу као одговор.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">инсталациону документацију ↗</a> за белешке око PHP конфигурације и PHP конфигурацију Вашег сервера, поготову ако користите php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Омогућена је Само-читај конфигурација. То спречава постављање неке конфигурације преко веб-интерфејса. Осим тога, фајлу мора бити ручно омогућено уписивање код сваког освежавања.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP је очигледно подешен да склања уметнуте doc блокове. То ће учинити неколико кључних апликација недоступним.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Ово је вероватно изазвано кешом или акцелератором као што су ЗендОПкеш или еАкцелератор.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "База података није покренута са \"READ COMMITTED\" нивоом изолације трансакција. Ово може изазвати проблеме ако се више различитих акција изврши у паралели.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s испод верзије %2$s је инсталиран. Због стабилности и перформанси, препоручује се ажурирање на новију, %1$s верзију.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Недостаје PHP модул „fileinfo“. Препоручујемо да га укључите да бисте добили најбоље резултате с откривањем MIME типова фајлова.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Трансактивно закључавање фајлова је искључено, што може довести до проблема са утркивањем процеса. Укључите 'filelocking.enabled' у config.php да бисте избегли проблеме овог типа. Погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a> за више информација.",
     "System locale can not be set to a one which supports UTF-8." : "Системски локалитет се не може поставити на неки који подржава УТФ-8",
     "This means that there might be problems with certain characters in filenames." : "Ово значи да може бити проблема са одређеним каракетерима који се појављују у именима фајлова.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Препоручујемо да инсталирате потребне пакете да бисте подржали следеће локалитете: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ако инсталација није инсталирана у основи домена и користи системски крон, може бити проблема са генерисањем веб адреса. Да бисте избегли ове проблеме, молимо вас да подесите \"overwrite.cli.url\" опцију у вашем  config.php фајлу у путању веб-основе ваше инсталације (Предложено: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Није било могуће да се изврши крон задатак путем интерфејса командне линије. Појавила су се следеће техничке грешке:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Добро погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">инсталациону документацију ↗</a> и проверите за било какве грешке или упозорења у <a href=\"%s\">записнику</a>.",
     "All checks passed." : "Све провере успешно прошле.",
     "Background jobs" : "Послови у позадини",
     "Last job ran %s." : "Последњи посао покренут %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Постоји доста доступних функционалности и конфигурација да оптимално прилагодите и користите ову инстанце. Овде су неки основни савети.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Тренутно се као база података користи SQLite. За веће инсталације, препоручујемо да промените базу података.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Ово се нарочито порепоручује ако се користи клијент програм у графичком окружењу за синхронизацију.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "За пресељење на другу базу података, користите алат командне линије:  'occ db:convert-type', или погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a>.",
     "How to do backups" : "Како правити резерве",
     "Advanced monitoring" : "Напредно праћење",
     "Performance tuning" : "Побољшање перформанси",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP је очигледно подешен да склања уметнуте doc блоковe. То ће учинити неколико кључних апликација недоступним.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s испод верзије %2$s је инсталиран. Због стабилности и перформанси, препоручујемо ажурирање на новију, %1$s верзију.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Недостаје PHP модул „fileinfo“. Препоручујемо вам да га укључите да бисте добили најбоље резултате с откривањем MIME типова фајлова.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Трансактивно закључавање фајлова је искључено, што може довести до проблема са утркивањем процеса. Укључите 'filelocking.enabled' у config.php да бисте избегли проблеме овог типа. Погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a> за више информација.",
     "This means that there might be problems with certain characters in file names." : "То значи да може доћи до проблема са неким знаковима у називима фајлова.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Препоручујемо да инсталирате потребне пакете да бисте подржали следеће локалитете: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ако инсталација није инсталирана у основи домена и користи системски крон, може бити проблема са генерисањем веб адреса. Да бисте избегли ове проблеме, молимо вас да подесите \"overwrite.cli.url\" опцију у вашем  config.php фајлу у путању веб-основе ваше инсталације (Предложено: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Није било могуће да се изврши крон задатак путем интерфејса командне линије. Појавила су се следеће техничке грешке:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Добро погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">инсталациону документацију ↗</a> и проверите за било какве грешке или упозорења у <a href=\"%s\">записнику</a>.",
     "Cron" : "Крон",
     "Last cron job execution: %s." : "Последњи извршени крон посао: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Последњи извршени крон посао: %s. Нешто изгледа није у реду.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Користите системски крон сервис за позивање cron.php фајла сваких 15 минута.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Да бисте ово покренули, потребна је PHP posix екстензија. Погледајте {linkstart}PHP документацију{linkend} за више детаља.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Дозволи самодовршавање корисничких имена у дијалогу за дељење. Ако је ово искључено, корисник ће морати да унесе пуно корисничко име.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "За пресељење на другу базу података, користите алат командне линије:  'occ db:convert-type', или погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a>.",
     "Uninstall app" : "Деинсталирај апликацију",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Поздрав,<br><br>само вас обавештавам да сад имате %s налог.<br><br>Ваше корисничко име: <strong>%s</strong><br>Приступите му на: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Здраво!",
diff --git a/settings/l10n/sr.json b/settings/l10n/sr.json
index 53f53c5ef0e..01d5e81459e 100644
--- a/settings/l10n/sr.json
+++ b/settings/l10n/sr.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Безбедносна и упозорења поставе",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Због безбедности и перформанси Ваше инстанце сервера, важно је да је све подешено исправно. Да бисмо Вам помогли у томе, радићемо неке аутоматске провере. Погледајте секцију са саветима и триковима, као и документацију за више информација.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP изгледа није исправно подешен да дохвата променљиве окружења. Тест са getenv(\"PATH\") враћа празну листу као одговор.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">инсталациону документацију ↗</a> за белешке око PHP конфигурације и PHP конфигурацију Вашег сервера, поготову ако користите php-fpm.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Омогућена је Само-читај конфигурација. То спречава постављање неке конфигурације преко веб-интерфејса. Осим тога, фајлу мора бити ручно омогућено уписивање код сваког освежавања.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP је очигледно подешен да склања уметнуте doc блокове. То ће учинити неколико кључних апликација недоступним.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Ово је вероватно изазвано кешом или акцелератором као што су ЗендОПкеш или еАкцелератор.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "База података није покренута са \"READ COMMITTED\" нивоом изолације трансакција. Ово може изазвати проблеме ако се више различитих акција изврши у паралели.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s испод верзије %2$s је инсталиран. Због стабилности и перформанси, препоручује се ажурирање на новију, %1$s верзију.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "Недостаје PHP модул „fileinfo“. Препоручујемо да га укључите да бисте добили најбоље резултате с откривањем MIME типова фајлова.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Трансактивно закључавање фајлова је искључено, што може довести до проблема са утркивањем процеса. Укључите 'filelocking.enabled' у config.php да бисте избегли проблеме овог типа. Погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a> за више информација.",
     "System locale can not be set to a one which supports UTF-8." : "Системски локалитет се не може поставити на неки који подржава УТФ-8",
     "This means that there might be problems with certain characters in filenames." : "Ово значи да може бити проблема са одређеним каракетерима који се појављују у именима фајлова.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Препоручујемо да инсталирате потребне пакете да бисте подржали следеће локалитете: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ако инсталација није инсталирана у основи домена и користи системски крон, може бити проблема са генерисањем веб адреса. Да бисте избегли ове проблеме, молимо вас да подесите \"overwrite.cli.url\" опцију у вашем  config.php фајлу у путању веб-основе ваше инсталације (Предложено: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Није било могуће да се изврши крон задатак путем интерфејса командне линије. Појавила су се следеће техничке грешке:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Добро погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">инсталациону документацију ↗</a> и проверите за било какве грешке или упозорења у <a href=\"%s\">записнику</a>.",
     "All checks passed." : "Све провере успешно прошле.",
     "Background jobs" : "Послови у позадини",
     "Last job ran %s." : "Последњи посао покренут %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Постоји доста доступних функционалности и конфигурација да оптимално прилагодите и користите ову инстанце. Овде су неки основни савети.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Тренутно се као база података користи SQLite. За веће инсталације, препоручујемо да промените базу података.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Ово се нарочито порепоручује ако се користи клијент програм у графичком окружењу за синхронизацију.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "За пресељење на другу базу података, користите алат командне линије:  'occ db:convert-type', или погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a>.",
     "How to do backups" : "Како правити резерве",
     "Advanced monitoring" : "Напредно праћење",
     "Performance tuning" : "Побољшање перформанси",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP је очигледно подешен да склања уметнуте doc блоковe. То ће учинити неколико кључних апликација недоступним.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s испод верзије %2$s је инсталиран. Због стабилности и перформанси, препоручујемо ажурирање на новију, %1$s верзију.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "Недостаје PHP модул „fileinfo“. Препоручујемо вам да га укључите да бисте добили најбоље резултате с откривањем MIME типова фајлова.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "Трансактивно закључавање фајлова је искључено, што може довести до проблема са утркивањем процеса. Укључите 'filelocking.enabled' у config.php да бисте избегли проблеме овог типа. Погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a> за више информација.",
     "This means that there might be problems with certain characters in file names." : "То значи да може доћи до проблема са неким знаковима у називима фајлова.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Препоручујемо да инсталирате потребне пакете да бисте подржали следеће локалитете: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Ако инсталација није инсталирана у основи домена и користи системски крон, може бити проблема са генерисањем веб адреса. Да бисте избегли ове проблеме, молимо вас да подесите \"overwrite.cli.url\" опцију у вашем  config.php фајлу у путању веб-основе ваше инсталације (Предложено: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Није било могуће да се изврши крон задатак путем интерфејса командне линије. Појавила су се следеће техничке грешке:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Добро погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">инсталациону документацију ↗</a> и проверите за било какве грешке или упозорења у <a href=\"%s\">записнику</a>.",
     "Cron" : "Крон",
     "Last cron job execution: %s." : "Последњи извршени крон посао: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Последњи извршени крон посао: %s. Нешто изгледа није у реду.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Користите системски крон сервис за позивање cron.php фајла сваких 15 минута.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Да бисте ово покренули, потребна је PHP posix екстензија. Погледајте {linkstart}PHP документацију{linkend} за више детаља.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Дозволи самодовршавање корисничких имена у дијалогу за дељење. Ако је ово искључено, корисник ће морати да унесе пуно корисничко име.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "За пресељење на другу базу података, користите алат командне линије:  'occ db:convert-type', или погледајте <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">документацију ↗</a>.",
     "Uninstall app" : "Деинсталирај апликацију",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Поздрав,<br><br>само вас обавештавам да сад имате %s налог.<br><br>Ваше корисничко име: <strong>%s</strong><br>Приступите му на: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Здраво!",
diff --git a/settings/l10n/sv.js b/settings/l10n/sv.js
index d1f2cee185b..f9a31fe8d17 100644
--- a/settings/l10n/sv.js
+++ b/settings/l10n/sv.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Säkerhet & systemvarningar",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Det är viktigt för säkerhet och prestanda av din instans att allting är konfigurerat korrekt. För att hjälpa dig gör vi några automatiska kontroller. Vänligen se Tips & Tricks och dokumentationen för mer information.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP verkar inte fungera att sättas upp ordentligt för query system miljövariabler. Testet med getenv(\"PATH\") returnerar bara ett tomt svar.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Vänligen kolla <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installationsdokumentationen ↗</a> för konfigurationsanteckningar om PHP på din server, särskilt när php-fpm används.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Läs-bara konfigureringen har blivit aktiv. Detta förhindrar att några konfigureringar kan sättas via webbgränssnittet.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP verkar uppenbarligen vara inställt på att ta bort inline doc blocks. Detta kommer gör flera viktiga appar otillgängliga.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Detta orsakas troligtvis av en cache/accelerator som t ex Zend OPchache eller eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Din databas kör inte \"READ COMMITED\" transaktionsisoleringsnvån. Detta kan orsaka problem när flera åtgärder körs parallellt.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s nedan version %2$s är installerat, av stabilitets- och presandaskäl rekommenderas en uppdatering till en nyare %1$s-version.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-modulen 'fileinfo' saknas. Det är starkt rekommenderat att aktivera denna modul för att få bäst resultat med MIME typdetektering.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "\"Transactional file locking\" är inaktiverad, detta kan innebära konkurrenstillstånd. Aktivera \"filelocking.enabled' i config.php för att undvika dessa problem. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentationen ↗</a> för mer information.",
     "System locale can not be set to a one which supports UTF-8." : "Systemspråk kan inte ställas in till ett som stödjer UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Detta innebär att det kan finnas problem med vissa tecken i filnamn",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Det är starkt rekommenderat att installera de nödvändiga paketen på ditt system för att stödja ett av följande locales (språk/region-inställningar):  %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Om din installation inte är installerad vid roten av domänen och använder systemets Cron kan det bli problem med URL-skapandet. För att undvika dessa problem, vänligen sätt \"overwrite.cli.url\"-alternativet i din config.php till webbrotplatsen för din installation (Förslag:  \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Det var inte möjligt att exekvera cron-jobbet via CLI. Följande tekniska fel dök upp:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Var god att dubbelkolla <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installationsguiden ↗</a>, och kolla efter några ändringar eller varningar i <a href=\"%s\">loggfilen</a>.",
     "All checks passed." : "Alla kontroller lyckades!",
     "Background jobs" : "Bakgrundsjobb",
     "Last job ran %s." : "Sista jobbet kördes %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Där är många funktioner och konfigurationsval tillgängliga för att automatiskt ställa in och använda din instans. Här är några hänvisningar för mer information.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite används som databas. För större installationer så rekommenderar vi ett byte till en annan databasbackend.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Detta rekommenderas speciellt när skrivbordsklienten används för att synkronisera filer.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "För att migrera till en annan databas använd kommandoverktyget 'occ db:convert-type' eller se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumentationen ↗</a>",
     "How to do backups" : "Hur man skapar säkerhetskopior",
     "Advanced monitoring" : "Avancerad bevakning",
     "Performance tuning" : "Prestandainställningar",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP är tydligen inställd för att rensa inline doc block. Detta kommer att göra flera kärnapplikationer otillgängliga.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s under version %2$s är installerad, för stabilitet och prestanda rekommenderar vi uppdatering till en nyare %1$s version.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP-modulen 'fileinfo' saknas. Vi rekommenderar starkt att aktivera den här modulen för att kunna upptäcka korrekt mime-typ.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "\"Transactional file locking\" är inaktiverad, detta kan innebära konkurrenstillstånd. Aktivera \"filelocking.enabled' i config.php för att undvika dessa problem. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentationen ↗</a> för mer information.",
     "This means that there might be problems with certain characters in file names." : "Detta betyder att där kan komma att uppstå problem med vissa tecken i filnamn.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Vi rekommenderar starkt att installera de nödvändiga paketen på ditt system för att stödja en av följande språkversioner: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Om din installation inte installerades på roten av domänen och använder system cron så kan det uppstå problem med URL-genereringen. För att undvika dessa problem, var vänlig sätt \"overwrite.cli.url\"-inställningen i din config.php-fil till webbrotsökvägen av din installation (Föreslagen: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Det var ej möjligt att exekvera cronjob via CLI. Följande tekniska fel har uppstått:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Var god att dubbelkolla <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installationsguiden ↗</a>, och kolla efter några ändringar eller varningar i <a href=\"%s\">loggfilen</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Sista cron kördes för %s",
     "Last cron job execution: %s. Something seems wrong." : "Sista cron kördes för %s. Något verkar vara fel.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Använd systemets cron-tjänst för att anropa cron.php var 15:e minut.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "För att köra detta behöver du PHP posix tillägget. Se {linkstart}PHP dokumentationen{linkend} för ytterligare detaljer.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Tillåt användarnamn att autokompletteras i delningsfönstret. Om det är inaktiverat krävs fullständigt användarnamn i rutan.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "För att migrera till en annan databas använd kommandoverktyget 'occ db:convert-type' eller se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumentationen ↗</a>",
     "Uninstall app" : "Avinstallera app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hej där,<br><br>Tänkte bara informera om att du nu har ett %s konto. <br><br>Ditt användarnamn: <strong>%s</strong><br>Logga in: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Ha de fint!",
diff --git a/settings/l10n/sv.json b/settings/l10n/sv.json
index bb2d32a0b47..e2163bfa3ec 100644
--- a/settings/l10n/sv.json
+++ b/settings/l10n/sv.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Säkerhet & systemvarningar",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Det är viktigt för säkerhet och prestanda av din instans att allting är konfigurerat korrekt. För att hjälpa dig gör vi några automatiska kontroller. Vänligen se Tips & Tricks och dokumentationen för mer information.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP verkar inte fungera att sättas upp ordentligt för query system miljövariabler. Testet med getenv(\"PATH\") returnerar bara ett tomt svar.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Vänligen kolla <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installationsdokumentationen ↗</a> för konfigurationsanteckningar om PHP på din server, särskilt när php-fpm används.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Läs-bara konfigureringen har blivit aktiv. Detta förhindrar att några konfigureringar kan sättas via webbgränssnittet.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP verkar uppenbarligen vara inställt på att ta bort inline doc blocks. Detta kommer gör flera viktiga appar otillgängliga.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Detta orsakas troligtvis av en cache/accelerator som t ex Zend OPchache eller eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Din databas kör inte \"READ COMMITED\" transaktionsisoleringsnvån. Detta kan orsaka problem när flera åtgärder körs parallellt.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s nedan version %2$s är installerat, av stabilitets- och presandaskäl rekommenderas en uppdatering till en nyare %1$s-version.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP-modulen 'fileinfo' saknas. Det är starkt rekommenderat att aktivera denna modul för att få bäst resultat med MIME typdetektering.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "\"Transactional file locking\" är inaktiverad, detta kan innebära konkurrenstillstånd. Aktivera \"filelocking.enabled' i config.php för att undvika dessa problem. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentationen ↗</a> för mer information.",
     "System locale can not be set to a one which supports UTF-8." : "Systemspråk kan inte ställas in till ett som stödjer UTF-8.",
     "This means that there might be problems with certain characters in filenames." : "Detta innebär att det kan finnas problem med vissa tecken i filnamn",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Det är starkt rekommenderat att installera de nödvändiga paketen på ditt system för att stödja ett av följande locales (språk/region-inställningar):  %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Om din installation inte är installerad vid roten av domänen och använder systemets Cron kan det bli problem med URL-skapandet. För att undvika dessa problem, vänligen sätt \"overwrite.cli.url\"-alternativet i din config.php till webbrotplatsen för din installation (Förslag:  \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Det var inte möjligt att exekvera cron-jobbet via CLI. Följande tekniska fel dök upp:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Var god att dubbelkolla <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installationsguiden ↗</a>, och kolla efter några ändringar eller varningar i <a href=\"%s\">loggfilen</a>.",
     "All checks passed." : "Alla kontroller lyckades!",
     "Background jobs" : "Bakgrundsjobb",
     "Last job ran %s." : "Sista jobbet kördes %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Där är många funktioner och konfigurationsval tillgängliga för att automatiskt ställa in och använda din instans. Här är några hänvisningar för mer information.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite används som databas. För större installationer så rekommenderar vi ett byte till en annan databasbackend.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Detta rekommenderas speciellt när skrivbordsklienten används för att synkronisera filer.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "För att migrera till en annan databas använd kommandoverktyget 'occ db:convert-type' eller se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumentationen ↗</a>",
     "How to do backups" : "Hur man skapar säkerhetskopior",
     "Advanced monitoring" : "Avancerad bevakning",
     "Performance tuning" : "Prestandainställningar",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP är tydligen inställd för att rensa inline doc block. Detta kommer att göra flera kärnapplikationer otillgängliga.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s under version %2$s är installerad, för stabilitet och prestanda rekommenderar vi uppdatering till en nyare %1$s version.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP-modulen 'fileinfo' saknas. Vi rekommenderar starkt att aktivera den här modulen för att kunna upptäcka korrekt mime-typ.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "\"Transactional file locking\" är inaktiverad, detta kan innebära konkurrenstillstånd. Aktivera \"filelocking.enabled' i config.php för att undvika dessa problem. Se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">dokumentationen ↗</a> för mer information.",
     "This means that there might be problems with certain characters in file names." : "Detta betyder att där kan komma att uppstå problem med vissa tecken i filnamn.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Vi rekommenderar starkt att installera de nödvändiga paketen på ditt system för att stödja en av följande språkversioner: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Om din installation inte installerades på roten av domänen och använder system cron så kan det uppstå problem med URL-genereringen. För att undvika dessa problem, var vänlig sätt \"overwrite.cli.url\"-inställningen i din config.php-fil till webbrotsökvägen av din installation (Föreslagen: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Det var ej möjligt att exekvera cronjob via CLI. Följande tekniska fel har uppstått:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Var god att dubbelkolla <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installationsguiden ↗</a>, och kolla efter några ändringar eller varningar i <a href=\"%s\">loggfilen</a>.",
     "Cron" : "Cron",
     "Last cron job execution: %s." : "Sista cron kördes för %s",
     "Last cron job execution: %s. Something seems wrong." : "Sista cron kördes för %s. Något verkar vara fel.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Använd systemets cron-tjänst för att anropa cron.php var 15:e minut.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "För att köra detta behöver du PHP posix tillägget. Se {linkstart}PHP dokumentationen{linkend} för ytterligare detaljer.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Tillåt användarnamn att autokompletteras i delningsfönstret. Om det är inaktiverat krävs fullständigt användarnamn i rutan.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "För att migrera till en annan databas använd kommandoverktyget 'occ db:convert-type' eller se <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\"> dokumentationen ↗</a>",
     "Uninstall app" : "Avinstallera app",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Hej där,<br><br>Tänkte bara informera om att du nu har ett %s konto. <br><br>Ditt användarnamn: <strong>%s</strong><br>Logga in: <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "Ha de fint!",
diff --git a/settings/l10n/tr.js b/settings/l10n/tr.js
index 0c28ae9fe86..cf3dfa35eeb 100644
--- a/settings/l10n/tr.js
+++ b/settings/l10n/tr.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "Güvenlik ve kurulum uyarıları",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Kopyanızın güvenli ve yüksek başarımla çalışması için ayarların doğru yapılmış olması önemlidir. Bunu sağlamak için bazı otomatik denetimler yapılır. Ayrıntılı bilgi almak için İpuçları bölümüne ve belgelere bakın.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP yanlış kurulmuş ve sistem ortam değişkenlerini okuyamıyor gibi görünüyor. getenv(\"PATH\") komutu ile yapılan sınama sonucunda boş bir yanıt alındı.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Lütfen PHP yapılandırma notları ve özellikle php-fpm kullanırken sunucunuzdaki PHP yapılandırması için <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">kurulum belgelerine ↗</a> bakın.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Salt Okunur yapılandırma etkinleştirilmiş. Bu yapılandırma, bazı ayarların web arayüzünden yapılmasını önler. Ayrıca, bu dosyanın her güncelleme öncesinde el ile yazılabilir yapılması gerekir.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP girintili doc bloklarını ayıklamak üzere yapılandırılmış gibi görünüyor. Bu durum bazı çekirdek uygulamalarına erişilmesini engelleyecek.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Bu sorun genellikle Zend OPcache ya da eAccelerator gibi bir ön bellek/hızlandırıcı nedeniyle ortaya çıkar.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Veritabanınız \"READ COMMITTED\" işlem yalıtma düzeyinde çalışmıyor. Bu durum aynı anda birden çok işlem yapıldığında sorun çıkmasına yol açabilir.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s, %2$s sürümünden daha düşük bir sürüm kurulu. Kararlılık ve başarım için daha yeni bir %1$s sürümüne güncellemeniz önerilir.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP 'fileinfo' modülü bulunamadı. MIME türü algılamasında en iyi sonuçları elde etmek için bu modülü etkinleştirmeniz önerilir.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "İşlemsel dosya kilidi devre dışı. Bu durum yarış koşullarında (race condition) sorun çıkarabilir. Bu sorunlardan kaçınmak için config.php dosyasındaki 'filelocking.enabled' seçeneğini etkinleştirin. Ayrıntılı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "System locale can not be set to a one which supports UTF-8." : "Sistem dili UTF-8 destekleyenlerden biri olarak ayarlanamadı.",
     "This means that there might be problems with certain characters in filenames." : "Bu durum dosya adlarında belirli karakterler kullanıldığında sorun çıkmasına yol açabilir.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Şu dillerden birini desteklemesi için sisteminize gerekli paketleri kurmanız önemle önerilir: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Kurulumunuz etki alanının kök klasörüne yapılmamış ve sistem Zamanlanmış Görevini kullanıyorsa, İnternet adresi oluşturma sorunları oluşabilir. Bu sorunların önüne geçmek için, kurulumunuzun config.php dosyasındaki \"overwrite.cli.url\" seçeneğini web kök klasörü olarak ayarlayın (Önerilen: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Zamanlanmış görev CLI üzerinden çalıştırılamadı. Şu teknik sorunlar çıktı:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lütfen <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">kurulum rehberlerini↗</a> yeniden gözden geçirin ve <a href=\"%s\">günlük</a> kayıtlarındaki hata ve uyarılara bakın.",
     "All checks passed." : "Tüm denetimlerden geçti.",
     "Background jobs" : "Art alan görevleri",
     "Last job ran %s." : "Son görev çalışması: %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Bu kopyayı kullanmak ve en iyi şekilde ayarlamak için çok sayıda özellik ve ayar seçeneği vardır. Ayrıntılı bilgi alabileceğiniz bazı konular şu şekildedir.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Şu anda veritabanı olarak SQLite kullanılıyor. Daha büyük kurulumlar için farklı bir veritabanı arka ucuna geçmenizi öneriyoruz.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Özellikle dosya eşitleme için masaüstü istemcisi kullanılırken SQLite kullanımı önerilmez.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Başka bir veritabanına geçmek için komut satırı aracını kullanın: 'occ db:convert-type' ya da <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "How to do backups" : "Nasıl yedek alınır",
     "Advanced monitoring" : "Gelişmiş izleme",
     "Performance tuning" : "Başarım ayarlama",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP girintili doc bloklarını ayıklamak üzere yapılandırılmış gibi görünüyor. Bu durum bazı çekirdek uygulamalarına erişilmesini engelleyecek.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s, %2$s sürümünden daha düşük bir sürüm kurulu. Kararlılık ve başarım için daha yeni bir %1$s sürümüne güncellemeniz önerilir.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP 'fileinfo' modülü bulunamadı. MIME türü algılamasında en iyi sonuçları elde etmek için bu modülü etkinleştirmeniz önerilir.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "İşlemsel dosya kilidi devre dışı. Bu durum yarış koşullarında (race condition) sorun çıkarabilir. Bu sorunlardan kaçınmak için config.php dosyasındaki 'filelocking.enabled' seçeneğini etkinleştirin. Ayrıntılı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "This means that there might be problems with certain characters in file names." : "Bu durum dosya adlarında belirli karakterler kullanıldığında sorun çıkmasına yol açabilir.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Şu dillerden birini desteklemesi için sisteminize gerekli paketleri kurmanız önemle önerilir: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Kurulumunuz etki alanının kök klasörüne yapılmamış ve sistem zamanlanmış görevini kullanıyorsa, İnternet adresi oluşturma sorunları oluşabilir. Bu sorunların önüne geçmek için, kurulumunuzun config.php dosyasındaki \"overwrite.cli.url\" seçeneğini web kök klasörü olarak ayarlayın (Önerilen: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Zamanlanmış görev CLI üzerinden çalıştırılamadı. Şu teknik sorunlar çıktı:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lütfen <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">kurulum rehberlerini↗</a> yeniden gözden geçirin ve <a href=\"%s\">günlük</a> kayıtlarındaki hata ve uyarılara bakın.",
     "Cron" : "Zamanlanmış Görev",
     "Last cron job execution: %s." : "Zamanlanmış görevin son yürütülmesi: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Zamanlanmış görevin son yürütülmesi: %s. Bir şeyler yanlış görünüyor.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "Cron.php dosyasını 15 dakikada bir çağırmak için sistem cron hizmeti kullanılır.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Bunu çalıştıraiblmek için PHP posix eklentisi gereklidir. Ayrıntılı bilgi almak için {linkstart}PHP belgelerine{linkend} bakın.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Bu seçenek etkinleştirildiğinde, paylaşma penceresindeki kullanıcı adı otomatik olarak tamamlanır. Devre dışı bırakıldığında kullanıcı adının tam olarak yazılması gerekir.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Başka bir veritabanına geçmek için komut satırı aracını kullanın: 'occ db:convert-type' ya da <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "Uninstall app" : "Uygulamayı Kaldır",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Merhaba,<br><br>Artık bir %s hesabınızın olduğunu bildirmek istedik.<br><br>Kullanıcı adınız: %s<br>Şuradan erişebilirsiniz: <a href=\"%s\">%s</a><br><br>",
     "Cheers!" : "Hoşçakalın!",
diff --git a/settings/l10n/tr.json b/settings/l10n/tr.json
index 14fdacaf3a6..781864b0e6d 100644
--- a/settings/l10n/tr.json
+++ b/settings/l10n/tr.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "Güvenlik ve kurulum uyarıları",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "Kopyanızın güvenli ve yüksek başarımla çalışması için ayarların doğru yapılmış olması önemlidir. Bunu sağlamak için bazı otomatik denetimler yapılır. Ayrıntılı bilgi almak için İpuçları bölümüne ve belgelere bakın.",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP yanlış kurulmuş ve sistem ortam değişkenlerini okuyamıyor gibi görünüyor. getenv(\"PATH\") komutu ile yapılan sınama sonucunda boş bir yanıt alındı.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "Lütfen PHP yapılandırma notları ve özellikle php-fpm kullanırken sunucunuzdaki PHP yapılandırması için <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">kurulum belgelerine ↗</a> bakın.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "Salt Okunur yapılandırma etkinleştirilmiş. Bu yapılandırma, bazı ayarların web arayüzünden yapılmasını önler. Ayrıca, bu dosyanın her güncelleme öncesinde el ile yazılabilir yapılması gerekir.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP girintili doc bloklarını ayıklamak üzere yapılandırılmış gibi görünüyor. Bu durum bazı çekirdek uygulamalarına erişilmesini engelleyecek.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "Bu sorun genellikle Zend OPcache ya da eAccelerator gibi bir ön bellek/hızlandırıcı nedeniyle ortaya çıkar.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "Veritabanınız \"READ COMMITTED\" işlem yalıtma düzeyinde çalışmıyor. Bu durum aynı anda birden çok işlem yapıldığında sorun çıkmasına yol açabilir.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "%1$s, %2$s sürümünden daha düşük bir sürüm kurulu. Kararlılık ve başarım için daha yeni bir %1$s sürümüne güncellemeniz önerilir.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP 'fileinfo' modülü bulunamadı. MIME türü algılamasında en iyi sonuçları elde etmek için bu modülü etkinleştirmeniz önerilir.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "İşlemsel dosya kilidi devre dışı. Bu durum yarış koşullarında (race condition) sorun çıkarabilir. Bu sorunlardan kaçınmak için config.php dosyasındaki 'filelocking.enabled' seçeneğini etkinleştirin. Ayrıntılı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "System locale can not be set to a one which supports UTF-8." : "Sistem dili UTF-8 destekleyenlerden biri olarak ayarlanamadı.",
     "This means that there might be problems with certain characters in filenames." : "Bu durum dosya adlarında belirli karakterler kullanıldığında sorun çıkmasına yol açabilir.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "Şu dillerden birini desteklemesi için sisteminize gerekli paketleri kurmanız önemle önerilir: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Kurulumunuz etki alanının kök klasörüne yapılmamış ve sistem Zamanlanmış Görevini kullanıyorsa, İnternet adresi oluşturma sorunları oluşabilir. Bu sorunların önüne geçmek için, kurulumunuzun config.php dosyasındaki \"overwrite.cli.url\" seçeneğini web kök klasörü olarak ayarlayın (Önerilen: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "Zamanlanmış görev CLI üzerinden çalıştırılamadı. Şu teknik sorunlar çıktı:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lütfen <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">kurulum rehberlerini↗</a> yeniden gözden geçirin ve <a href=\"%s\">günlük</a> kayıtlarındaki hata ve uyarılara bakın.",
     "All checks passed." : "Tüm denetimlerden geçti.",
     "Background jobs" : "Art alan görevleri",
     "Last job ran %s." : "Son görev çalışması: %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "Bu kopyayı kullanmak ve en iyi şekilde ayarlamak için çok sayıda özellik ve ayar seçeneği vardır. Ayrıntılı bilgi alabileceğiniz bazı konular şu şekildedir.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Şu anda veritabanı olarak SQLite kullanılıyor. Daha büyük kurulumlar için farklı bir veritabanı arka ucuna geçmenizi öneriyoruz.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Özellikle dosya eşitleme için masaüstü istemcisi kullanılırken SQLite kullanımı önerilmez.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Başka bir veritabanına geçmek için komut satırı aracını kullanın: 'occ db:convert-type' ya da <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "How to do backups" : "Nasıl yedek alınır",
     "Advanced monitoring" : "Gelişmiş izleme",
     "Performance tuning" : "Başarım ayarlama",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP girintili doc bloklarını ayıklamak üzere yapılandırılmış gibi görünüyor. Bu durum bazı çekirdek uygulamalarına erişilmesini engelleyecek.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "%1$s, %2$s sürümünden daha düşük bir sürüm kurulu. Kararlılık ve başarım için daha yeni bir %1$s sürümüne güncellemeniz önerilir.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP 'fileinfo' modülü bulunamadı. MIME türü algılamasında en iyi sonuçları elde etmek için bu modülü etkinleştirmeniz önerilir.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "İşlemsel dosya kilidi devre dışı. Bu durum yarış koşullarında (race condition) sorun çıkarabilir. Bu sorunlardan kaçınmak için config.php dosyasındaki 'filelocking.enabled' seçeneğini etkinleştirin. Ayrıntılı bilgi almak için <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "This means that there might be problems with certain characters in file names." : "Bu durum dosya adlarında belirli karakterler kullanıldığında sorun çıkmasına yol açabilir.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "Şu dillerden birini desteklemesi için sisteminize gerekli paketleri kurmanız önemle önerilir: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "Kurulumunuz etki alanının kök klasörüne yapılmamış ve sistem zamanlanmış görevini kullanıyorsa, İnternet adresi oluşturma sorunları oluşabilir. Bu sorunların önüne geçmek için, kurulumunuzun config.php dosyasındaki \"overwrite.cli.url\" seçeneğini web kök klasörü olarak ayarlayın (Önerilen: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "Zamanlanmış görev CLI üzerinden çalıştırılamadı. Şu teknik sorunlar çıktı:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "Lütfen <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">kurulum rehberlerini↗</a> yeniden gözden geçirin ve <a href=\"%s\">günlük</a> kayıtlarındaki hata ve uyarılara bakın.",
     "Cron" : "Zamanlanmış Görev",
     "Last cron job execution: %s." : "Zamanlanmış görevin son yürütülmesi: %s.",
     "Last cron job execution: %s. Something seems wrong." : "Zamanlanmış görevin son yürütülmesi: %s. Bir şeyler yanlış görünüyor.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "Cron.php dosyasını 15 dakikada bir çağırmak için sistem cron hizmeti kullanılır.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "Bunu çalıştıraiblmek için PHP posix eklentisi gereklidir. Ayrıntılı bilgi almak için {linkstart}PHP belgelerine{linkend} bakın.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "Bu seçenek etkinleştirildiğinde, paylaşma penceresindeki kullanıcı adı otomatik olarak tamamlanır. Devre dışı bırakıldığında kullanıcı adının tam olarak yazılması gerekir.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "Başka bir veritabanına geçmek için komut satırı aracını kullanın: 'occ db:convert-type' ya da <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">belgelere ↗</a> bakın.",
     "Uninstall app" : "Uygulamayı Kaldır",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "Merhaba,<br><br>Artık bir %s hesabınızın olduğunu bildirmek istedik.<br><br>Kullanıcı adınız: %s<br>Şuradan erişebilirsiniz: <a href=\"%s\">%s</a><br><br>",
     "Cheers!" : "Hoşçakalın!",
diff --git a/settings/l10n/zh_CN.js b/settings/l10n/zh_CN.js
index f53988b9875..10fbe00353b 100644
--- a/settings/l10n/zh_CN.js
+++ b/settings/l10n/zh_CN.js
@@ -252,20 +252,17 @@ OC.L10N.register(
     "Security & setup warnings" : "安全及设置警告",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "你的每项配置对于实例的安全性和性能都至关重要。 为了帮助您，我们正在做一些自动检查。 有关详细信息，请参阅提示与技巧部分和文档。",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 的设置似乎有问题, 无法获取系统环境变量. 使用 getenv(\\\"PATH\\\") 测试时仅返回空结果.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "请检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装文档 ↗</a> 中关于 PHP 配置的说明并在您的服务器中进行配置, 尤其是使用 php-fpm 时.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "已启用只读配置. 这将阻止在 Web 界面中进行设置. 此外, 每次更新后该文件需要手动设置为可写入.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 被设置为移除内联块, 这将导致多个核心应用无法访问.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "这可能是由缓存/加速器造成的, 例如 Zend OPcache 或 eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的数据库不能在 \"READ COMMITTED\" 事务隔离级别运行. 这样可能导致在多个并行操作时出现问题.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "已安装 %1$s 的低版本 %2$s. 出于稳定性和性能的原因, 我们建议您升级到更新的 %1$s 版本.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP 模块 'fileinfo' 缺失. 我们强烈建议启用此模块以便在 MIME 类型检测时获得最准确的结果.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事务文件锁被禁用, 这可能导致竞争条件的问题. 在 config.php 中启用 'filelocking.enabled' 选项来避免这些问题. 请参考 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档↗</a> 获取更多信息.",
     "System locale can not be set to a one which supports UTF-8." : "系统区域无法设置为支持 UTF-8 的区域.",
     "This means that there might be problems with certain characters in filenames." : "这意味着当文件名中包含特定字符时可能出现问题.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "我们强烈建议在您的系统中安装需要的包以支持下列区域: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您不是安装在域名的根目录, 并且使用系统 cron 服务时, 可能导致 URL 生成问题. 为了避免这些问题, 请在您的 config.php 文件中设置 \"overwrite.cli.url\" 选项为您的安装根目录路径 (建议: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "由于下列的技术错误, 无法通过 CLI 执行计划任务:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "请再次检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装指南 ↗</a>, 并检查 <a href=\"%s\">日志</a> 中的任何错误或警告.",
     "All checks passed." : "所有检查已通过.",
     "Background jobs" : "后台任务",
     "Last job ran %s." : "上次定时任务执行于: %s.",
@@ -301,7 +298,6 @@ OC.L10N.register(
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "有很多功能和配置可用于更好地自定义和使用此实例。以下是更多相关信息的指南。",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite 当前被用作数据库. 对于较大数据量的安装和使用, 我们建议您切换到不同的数据库后端.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "当时用桌面客户端同步文件时特别推荐.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "合并其他数据库可以使用命令行工具:  'occ db:convert-type', 或查看 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档 ↗</a>.",
     "How to do backups" : "如何备份",
     "Advanced monitoring" : "高级监控",
     "Performance tuning" : "性能优化",
@@ -410,10 +406,12 @@ OC.L10N.register(
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 被设置为移除内联块, 这将导致多个核心应用无法访问.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "已安装 %1$s 的低版本 %2$s. 出于稳定性和性能的原因, 我们建议您升级到更新的 %1$s 版本.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP 模块 'fileinfo' 缺失. 我们强烈建议启用此模块以便在 MIME 类型检测时获得最准确的结果.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事务文件锁被禁用, 这可能导致竞争条件的问题. 在 config.php 中启用 'filelocking.enabled' 选项来避免这些问题. 请参考 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档↗</a> 获取更多信息.",
     "This means that there might be problems with certain characters in file names." : "这意味着当文件名中包含特定字符时可能出现问题.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "我们强烈建议在您的系统中安装需要的包以支持下列区域: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您不是安装在域名的根目录, 并且使用系统 cron 服务时, 可能导致 URL 生成问题. 为了避免这些问题, 请在您的 config.php 文件中设置 \"overwrite.cli.url\" 选项为您的安装根目录路径 (建议: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "由于下列的技术错误, 无法通过 CLI 执行计划任务:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "请再次检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装指南 ↗</a>, 并检查 <a href=\"%s\">日志</a> 中的任何错误或警告.",
     "Cron" : "计划任务",
     "Last cron job execution: %s." : "上次定时任务执行于: %s.",
     "Last cron job execution: %s. Something seems wrong." : "上次定时任务执行于: %s. 但存在一些问题.",
@@ -422,6 +420,7 @@ OC.L10N.register(
     "Use system's cron service to call the cron.php file every 15 minutes." : "使用系统 cron 服务每 15 分钟执行一次 cron.php 文件.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "为了运行该功能, 您需要 PHP posix 扩展. 请参考 {linkstart}PHP 文档{linkend} 获取更多信息.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "允许在共享对话框中自动补全用户名. 如果被禁用, 需要输入完整的用户名.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "合并其他数据库可以使用命令行工具:  'occ db:convert-type', 或查看 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档 ↗</a>.",
     "Uninstall app" : "卸载应用",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "您好,<br><br>您刚刚创建了 %s 账户<br><br>您的用户名: <strong>%s</strong><br>现在访问:  <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "干杯!",
diff --git a/settings/l10n/zh_CN.json b/settings/l10n/zh_CN.json
index 5a8f841e6d2..976e8325111 100644
--- a/settings/l10n/zh_CN.json
+++ b/settings/l10n/zh_CN.json
@@ -250,20 +250,17 @@
     "Security & setup warnings" : "安全及设置警告",
     "It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the Tips & Tricks section and the documentation for more information." : "你的每项配置对于实例的安全性和性能都至关重要。 为了帮助您，我们正在做一些自动检查。 有关详细信息，请参阅提示与技巧部分和文档。",
     "PHP does not seem to be setup properly to query system environment variables. The test with getenv(\"PATH\") only returns an empty response." : "PHP 的设置似乎有问题, 无法获取系统环境变量. 使用 getenv(\\\"PATH\\\") 测试时仅返回空结果.",
-    "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for PHP configuration notes and the PHP configuration of your server, especially when using php-fpm." : "请检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装文档 ↗</a> 中关于 PHP 配置的说明并在您的服务器中进行配置, 尤其是使用 php-fpm 时.",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "已启用只读配置. 这将阻止在 Web 界面中进行设置. 此外, 每次更新后该文件需要手动设置为可写入.",
     "PHP is apparently set up to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 被设置为移除内联块, 这将导致多个核心应用无法访问.",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "这可能是由缓存/加速器造成的, 例如 Zend OPcache 或 eAccelerator.",
     "Your database does not run with \"READ COMMITTED\" transaction isolation level. This can cause problems when multiple actions are executed in parallel." : "您的数据库不能在 \"READ COMMITTED\" 事务隔离级别运行. 这样可能导致在多个并行操作时出现问题.",
     "%1$s below version %2$s is installed, for stability and performance reasons it is recommended to update to a newer %1$s version." : "已安装 %1$s 的低版本 %2$s. 出于稳定性和性能的原因, 我们建议您升级到更新的 %1$s 版本.",
     "The PHP module 'fileinfo' is missing. It is strongly recommended to enable this module to get the best results with MIME type detection." : "PHP 模块 'fileinfo' 缺失. 我们强烈建议启用此模块以便在 MIME 类型检测时获得最准确的结果.",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事务文件锁被禁用, 这可能导致竞争条件的问题. 在 config.php 中启用 'filelocking.enabled' 选项来避免这些问题. 请参考 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档↗</a> 获取更多信息.",
     "System locale can not be set to a one which supports UTF-8." : "系统区域无法设置为支持 UTF-8 的区域.",
     "This means that there might be problems with certain characters in filenames." : "这意味着当文件名中包含特定字符时可能出现问题.",
     "It is strongly proposed to install the required packages on your system to support one of the following locales: %s." : "我们强烈建议在您的系统中安装需要的包以支持下列区域: %s.",
     "If your installation is not installed at the root of the domain and uses system Cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您不是安装在域名的根目录, 并且使用系统 cron 服务时, 可能导致 URL 生成问题. 为了避免这些问题, 请在您的 config.php 文件中设置 \"overwrite.cli.url\" 选项为您的安装根目录路径 (建议: \"%s\")",
     "It was not possible to execute the cron job via CLI. The following technical errors have appeared:" : "由于下列的技术错误, 无法通过 CLI 执行计划任务:",
-    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "请再次检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装指南 ↗</a>, 并检查 <a href=\"%s\">日志</a> 中的任何错误或警告.",
     "All checks passed." : "所有检查已通过.",
     "Background jobs" : "后台任务",
     "Last job ran %s." : "上次定时任务执行于: %s.",
@@ -299,7 +296,6 @@
     "There are a lot of features and config switches available to optimally customize and use this instance. Here are some pointers for more information." : "有很多功能和配置可用于更好地自定义和使用此实例。以下是更多相关信息的指南。",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "SQLite 当前被用作数据库. 对于较大数据量的安装和使用, 我们建议您切换到不同的数据库后端.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "当时用桌面客户端同步文件时特别推荐.",
-    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "合并其他数据库可以使用命令行工具:  'occ db:convert-type', 或查看 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档 ↗</a>.",
     "How to do backups" : "如何备份",
     "Advanced monitoring" : "高级监控",
     "Performance tuning" : "性能优化",
@@ -408,10 +404,12 @@
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 被设置为移除内联块, 这将导致多个核心应用无法访问.",
     "%1$s below version %2$s is installed, for stability and performance reasons we recommend updating to a newer %1$s version." : "已安装 %1$s 的低版本 %2$s. 出于稳定性和性能的原因, 我们建议您升级到更新的 %1$s 版本.",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "PHP 模块 'fileinfo' 缺失. 我们强烈建议启用此模块以便在 MIME 类型检测时获得最准确的结果.",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事务文件锁被禁用, 这可能导致竞争条件的问题. 在 config.php 中启用 'filelocking.enabled' 选项来避免这些问题. 请参考 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档↗</a> 获取更多信息.",
     "This means that there might be problems with certain characters in file names." : "这意味着当文件名中包含特定字符时可能出现问题.",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "我们强烈建议在您的系统中安装需要的包以支持下列区域: %s.",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您不是安装在域名的根目录, 并且使用系统 cron 服务时, 可能导致 URL 生成问题. 为了避免这些问题, 请在您的 config.php 文件中设置 \"overwrite.cli.url\" 选项为您的安装根目录路径 (建议: \"%s\")",
     "It was not possible to execute the cronjob via CLI. The following technical errors have appeared:" : "由于下列的技术错误, 无法通过 CLI 执行计划任务:",
+    "Please double check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "请再次检查 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">安装指南 ↗</a>, 并检查 <a href=\"%s\">日志</a> 中的任何错误或警告.",
     "Cron" : "计划任务",
     "Last cron job execution: %s." : "上次定时任务执行于: %s.",
     "Last cron job execution: %s. Something seems wrong." : "上次定时任务执行于: %s. 但存在一些问题.",
@@ -420,6 +418,7 @@
     "Use system's cron service to call the cron.php file every 15 minutes." : "使用系统 cron 服务每 15 分钟执行一次 cron.php 文件.",
     "To run this you need the PHP posix extension. See {linkstart}PHP documentation{linkend} for more details." : "为了运行该功能, 您需要 PHP posix 扩展. 请参考 {linkstart}PHP 文档{linkend} 获取更多信息.",
     "Allow username autocompletion in share dialog. If this is disabled the full username needs to be entered." : "允许在共享对话框中自动补全用户名. 如果被禁用, 需要输入完整的用户名.",
+    "To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a>." : "合并其他数据库可以使用命令行工具:  'occ db:convert-type', 或查看 <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">文档 ↗</a>.",
     "Uninstall app" : "卸载应用",
     "Hey there,<br><br>just letting you know that you now have a %s account.<br><br>Your username: <strong>%s</strong><br>Access it: <strong><a href=\"%s\">%s</a></strong><br><br>" : "您好,<br><br>您刚刚创建了 %s 账户<br><br>您的用户名: <strong>%s</strong><br>现在访问:  <strong><a href=\"%s\">%s</a></strong><br><br>",
     "Cheers!" : "干杯!",
diff --git a/settings/l10n/zh_TW.js b/settings/l10n/zh_TW.js
index 16664e01184..70761297054 100644
--- a/settings/l10n/zh_TW.js
+++ b/settings/l10n/zh_TW.js
@@ -229,7 +229,6 @@ OC.L10N.register(
     "Security & setup warnings" : "安全及設定警告",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用，這樣可以防止來自網頁端的設定操作，每次需要更改設定時，都需要手動將設定檔暫時改為可讀寫。",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "這大概是由快取或是加速器像是 Zend OPcache, eAccelerator 造成的",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 'filelocking.enabled' 以避免出現這樣的問題，請參考<a target=\\\"_blank\\\" href=\\\"%s\\\">文件手冊 ↗</a> 來了解更多的資訊。",
     "System locale can not be set to a one which supports UTF-8." : "無法設定為一個支援 UTF-8 的系統語系",
     "All checks passed." : "所有檢查正常",
     "Execute one task with each page loaded" : "每個頁面載入時執行",
@@ -318,6 +317,7 @@ OC.L10N.register(
     "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm." : "請您參考 <a target=\\\"_blank\\\" href=\\\"%s\\\">安裝文件手冊 ↗</a> 來確認php的設定值以及伺服器端的php設定，特別是當您使用php-fpm。",
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 已經設定成「剪除 inline doc block」模式，這將會使幾個核心應用程式無法使用",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "未偵測到 PHP 模組 'fileinfo'。我們強烈建議啟用這個模組以取得最好的 mime-type 支援。",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 'filelocking.enabled' 以避免出現這樣的問題，請參考<a target=\\\"_blank\\\" href=\\\"%s\\\">文件手冊 ↗</a> 來了解更多的資訊。",
     "This means that there might be problems with certain characters in file names." : "這表示檔名中使用一些特殊字元可能會造成問題",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "我們強烈建議在您的系統上安裝必要的套件來支援以下的語系：%s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您的安裝不在網域的最上層，並且使用 cron 作為排程器，URL 的生成可能會有問題，為了避免這樣的狀況，請您在 config.php 檔案裡設定 overwrite.cli.url 為您安裝的 webroot 路徑（建議值：\"%s\"）",
diff --git a/settings/l10n/zh_TW.json b/settings/l10n/zh_TW.json
index c6704caff95..a6348c6d1b8 100644
--- a/settings/l10n/zh_TW.json
+++ b/settings/l10n/zh_TW.json
@@ -227,7 +227,6 @@
     "Security & setup warnings" : "安全及設定警告",
     "The Read-Only config has been enabled. This prevents setting some configurations via the web-interface. Furthermore, the file needs to be made writable manually for every update." : "「唯讀設定檔」已經啟用，這樣可以防止來自網頁端的設定操作，每次需要更改設定時，都需要手動將設定檔暫時改為可讀寫。",
     "This is probably caused by a cache/accelerator such as Zend OPcache or eAccelerator." : "這大概是由快取或是加速器像是 Zend OPcache, eAccelerator 造成的",
-    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 'filelocking.enabled' 以避免出現這樣的問題，請參考<a target=\\\"_blank\\\" href=\\\"%s\\\">文件手冊 ↗</a> 來了解更多的資訊。",
     "System locale can not be set to a one which supports UTF-8." : "無法設定為一個支援 UTF-8 的系統語系",
     "All checks passed." : "所有檢查正常",
     "Execute one task with each page loaded" : "每個頁面載入時執行",
@@ -316,6 +315,7 @@
     "Please check the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">installation documentation ↗</a> for php configuration notes and the php configuration of your server, especially when using php-fpm." : "請您參考 <a target=\\\"_blank\\\" href=\\\"%s\\\">安裝文件手冊 ↗</a> 來確認php的設定值以及伺服器端的php設定，特別是當您使用php-fpm。",
     "PHP is apparently setup to strip inline doc blocks. This will make several core apps inaccessible." : "PHP 已經設定成「剪除 inline doc block」模式，這將會使幾個核心應用程式無法使用",
     "The PHP module 'fileinfo' is missing. We strongly recommend to enable this module to get best results with mime-type detection." : "未偵測到 PHP 模組 'fileinfo'。我們強烈建議啟用這個模組以取得最好的 mime-type 支援。",
+    "Transactional file locking is disabled, this might lead to issues with race conditions. Enable 'filelocking.enabled' in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer\" href=\"%s\">documentation ↗</a> for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 'filelocking.enabled' 以避免出現這樣的問題，請參考<a target=\\\"_blank\\\" href=\\\"%s\\\">文件手冊 ↗</a> 來了解更多的資訊。",
     "This means that there might be problems with certain characters in file names." : "這表示檔名中使用一些特殊字元可能會造成問題",
     "We strongly suggest installing the required packages on your system to support one of the following locales: %s." : "我們強烈建議在您的系統上安裝必要的套件來支援以下的語系：%s",
     "If your installation is not installed in the root of the domain and uses system cron, there can be issues with the URL generation. To avoid these problems, please set the \"overwrite.cli.url\" option in your config.php file to the webroot path of your installation (Suggested: \"%s\")" : "如果您的安裝不在網域的最上層，並且使用 cron 作為排程器，URL 的生成可能會有問題，為了避免這樣的狀況，請您在 config.php 檔案裡設定 overwrite.cli.url 為您安裝的 webroot 路徑（建議值：\"%s\"）",