diff options
Diffstat (limited to 'apps/twofactor_backupcodes')
42 files changed, 424 insertions, 424 deletions
diff --git a/apps/twofactor_backupcodes/l10n/bg.js b/apps/twofactor_backupcodes/l10n/bg.js index 44d59145de3..d385c7fcdb4 100644 --- a/apps/twofactor_backupcodes/l10n/bg.js +++ b/apps/twofactor_backupcodes/l10n/bg.js @@ -1,10 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "активиран", - "deactivated" : "деактивиран", - "created" : "създаден", - "destroyed" : "унищожен", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Това е вашия резервен код. Моля, запишете го (или го принтирайте) защото по-късно няма да имате възможност да го видите.", "Save backup codes" : "Записване на резервния код", "Print backup codes" : "Принтиране на резервния код", @@ -18,6 +14,10 @@ OC.L10N.register( "Second-factor backup codes" : "Резервен код за втората стъпка", "You have enabled two-factor authentication but have not yet generated backup codes. Be sure to do this in case you lose access to your second factor." : "Включили сте двустепенното удостоверяването, но не сте създали резервен код. Моля, създайте резервен код, който да ползвате когато загубите достъп до устройството генериращо кода за втората стъпка в удостоверяването.", "Backup code" : "Резервен код", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода.", + "activated" : "активиран", + "deactivated" : "деактивиран", + "created" : "създаден", + "destroyed" : "унищожен" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/bg.json b/apps/twofactor_backupcodes/l10n/bg.json index fd20b08d44b..e3f1725a659 100644 --- a/apps/twofactor_backupcodes/l10n/bg.json +++ b/apps/twofactor_backupcodes/l10n/bg.json @@ -1,8 +1,4 @@ { "translations": { - "activated" : "активиран", - "deactivated" : "деактивиран", - "created" : "създаден", - "destroyed" : "унищожен", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Това е вашия резервен код. Моля, запишете го (или го принтирайте) защото по-късно няма да имате възможност да го видите.", "Save backup codes" : "Записване на резервния код", "Print backup codes" : "Принтиране на резервния код", @@ -16,6 +12,10 @@ "Second-factor backup codes" : "Резервен код за втората стъпка", "You have enabled two-factor authentication but have not yet generated backup codes. Be sure to do this in case you lose access to your second factor." : "Включили сте двустепенното удостоверяването, но не сте създали резервен код. Моля, създайте резервен код, който да ползвате когато загубите достъп до устройството генериращо кода за втората стъпка в удостоверяването.", "Backup code" : "Резервен код", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода.", + "activated" : "активиран", + "deactivated" : "деактивиран", + "created" : "създаден", + "destroyed" : "унищожен" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/cs.js b/apps/twofactor_backupcodes/l10n/cs.js index 0861065ec70..3fbcf92cd2e 100644 --- a/apps/twofactor_backupcodes/l10n/cs.js +++ b/apps/twofactor_backupcodes/l10n/cs.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "aktivováno", - "updated" : "aktualizováno", - "mounted" : "připojeno (mount)", - "deactivated" : "deaktivováno", - "beforeCreate" : "předVytvořením", - "created" : "vytvořen", - "beforeUpdate" : "předAktualizací", - "beforeDestroy" : "předZničením", - "destroyed" : "zničeno", - "beforeMount" : "předPřipojením", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Zde jsou vaše záložní kódy. Kódy si uložte a/nebo vytiskněte, protože už je nebude možné zobrazit znovu.", "Save backup codes" : "Uložit záložní kódy", "Print backup codes" : "Vytisknout záložní kódy", @@ -29,6 +19,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Poskytovatel záložních kódů pro dvoustupňové ověřování", "Use one of the backup codes you saved when setting up two-factor authentication." : "Použijte jeden ze svých záložních kódů které jste si uložili při nastavování dvoufázového ověřování.", "Submit" : "Odeslat", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito.", + "activated" : "aktivováno", + "updated" : "aktualizováno", + "mounted" : "připojeno (mount)", + "deactivated" : "deaktivováno", + "beforeCreate" : "předVytvořením", + "created" : "vytvořen", + "beforeUpdate" : "předAktualizací", + "beforeDestroy" : "předZničením", + "destroyed" : "zničeno", + "beforeMount" : "předPřipojením" }, "nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;"); diff --git a/apps/twofactor_backupcodes/l10n/cs.json b/apps/twofactor_backupcodes/l10n/cs.json index 48bbf9d1b65..06b11c419bf 100644 --- a/apps/twofactor_backupcodes/l10n/cs.json +++ b/apps/twofactor_backupcodes/l10n/cs.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "aktivováno", - "updated" : "aktualizováno", - "mounted" : "připojeno (mount)", - "deactivated" : "deaktivováno", - "beforeCreate" : "předVytvořením", - "created" : "vytvořen", - "beforeUpdate" : "předAktualizací", - "beforeDestroy" : "předZničením", - "destroyed" : "zničeno", - "beforeMount" : "předPřipojením", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Zde jsou vaše záložní kódy. Kódy si uložte a/nebo vytiskněte, protože už je nebude možné zobrazit znovu.", "Save backup codes" : "Uložit záložní kódy", "Print backup codes" : "Vytisknout záložní kódy", @@ -27,6 +17,16 @@ "A two-factor auth backup codes provider" : "Poskytovatel záložních kódů pro dvoustupňové ověřování", "Use one of the backup codes you saved when setting up two-factor authentication." : "Použijte jeden ze svých záložních kódů které jste si uložili při nastavování dvoufázového ověřování.", "Submit" : "Odeslat", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito.", + "activated" : "aktivováno", + "updated" : "aktualizováno", + "mounted" : "připojeno (mount)", + "deactivated" : "deaktivováno", + "beforeCreate" : "předVytvořením", + "created" : "vytvořen", + "beforeUpdate" : "předAktualizací", + "beforeDestroy" : "předZničením", + "destroyed" : "zničeno", + "beforeMount" : "předPřipojením" },"pluralForm" :"nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/de.js b/apps/twofactor_backupcodes/l10n/de.js index a5b475165b8..454b192aea0 100644 --- a/apps/twofactor_backupcodes/l10n/de.js +++ b/apps/twofactor_backupcodes/l10n/de.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "Aktiviert", - "updated" : "Aktualisiert", - "mounted" : "Eingebunden", - "deactivated" : "Deaktiviert", - "beforeCreate" : "beforeCreate", - "created" : "Erstellt", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "Vernichtet", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Deine Backup-Codes. Bitte speichere und/oder drucke diese aus, da diese Codes später nicht mehr gelesen werden können", "Save backup codes" : "Backup-Codes speichern", "Print backup codes" : "Backup-Codes drucken", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes", "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwende einen der Backup-Codes, den Du bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert hast.", "Submit" : "Übermitteln", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt.", + "activated" : "Aktiviert", + "updated" : "Aktualisiert", + "mounted" : "Eingebunden", + "deactivated" : "Deaktiviert", + "beforeCreate" : "beforeCreate", + "created" : "Erstellt", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "Vernichtet", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/de.json b/apps/twofactor_backupcodes/l10n/de.json index 26a0f1be897..437522b0a82 100644 --- a/apps/twofactor_backupcodes/l10n/de.json +++ b/apps/twofactor_backupcodes/l10n/de.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "Aktiviert", - "updated" : "Aktualisiert", - "mounted" : "Eingebunden", - "deactivated" : "Deaktiviert", - "beforeCreate" : "beforeCreate", - "created" : "Erstellt", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "Vernichtet", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Deine Backup-Codes. Bitte speichere und/oder drucke diese aus, da diese Codes später nicht mehr gelesen werden können", "Save backup codes" : "Backup-Codes speichern", "Print backup codes" : "Backup-Codes drucken", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes", "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwende einen der Backup-Codes, den Du bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert hast.", "Submit" : "Übermitteln", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt.", + "activated" : "Aktiviert", + "updated" : "Aktualisiert", + "mounted" : "Eingebunden", + "deactivated" : "Deaktiviert", + "beforeCreate" : "beforeCreate", + "created" : "Erstellt", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "Vernichtet", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/de_DE.js b/apps/twofactor_backupcodes/l10n/de_DE.js index 0573fb9d8a7..cb8b3eeaf74 100644 --- a/apps/twofactor_backupcodes/l10n/de_DE.js +++ b/apps/twofactor_backupcodes/l10n/de_DE.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "Aktiviert", - "updated" : "Aktualisiert", - "mounted" : "Eingebunden", - "deactivated" : "Deaktiviert", - "beforeCreate" : "beforeCreate", - "created" : "Erstellt", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "Vernichtet", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Ihre Backup-Codes. Bitte speichern und/oder drucken Sie diese, da diese Codes später nicht mehr gelesen werden können", "Save backup codes" : "Backup-Codes speichern", "Print backup codes" : "Backup-Codes drucken", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes", "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwenden Sie einen der Backup-Codes, den Sie bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert haben.", "Submit" : "Übermitteln", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt.", + "activated" : "Aktiviert", + "updated" : "Aktualisiert", + "mounted" : "Eingebunden", + "deactivated" : "Deaktiviert", + "beforeCreate" : "beforeCreate", + "created" : "Erstellt", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "Vernichtet", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/de_DE.json b/apps/twofactor_backupcodes/l10n/de_DE.json index 57716668ae6..3903387a982 100644 --- a/apps/twofactor_backupcodes/l10n/de_DE.json +++ b/apps/twofactor_backupcodes/l10n/de_DE.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "Aktiviert", - "updated" : "Aktualisiert", - "mounted" : "Eingebunden", - "deactivated" : "Deaktiviert", - "beforeCreate" : "beforeCreate", - "created" : "Erstellt", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "Vernichtet", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Ihre Backup-Codes. Bitte speichern und/oder drucken Sie diese, da diese Codes später nicht mehr gelesen werden können", "Save backup codes" : "Backup-Codes speichern", "Print backup codes" : "Backup-Codes drucken", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes", "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwenden Sie einen der Backup-Codes, den Sie bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert haben.", "Submit" : "Übermitteln", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt.", + "activated" : "Aktiviert", + "updated" : "Aktualisiert", + "mounted" : "Eingebunden", + "deactivated" : "Deaktiviert", + "beforeCreate" : "beforeCreate", + "created" : "Erstellt", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "Vernichtet", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/en_GB.js b/apps/twofactor_backupcodes/l10n/en_GB.js index 40a5556a5c3..3a82a7b8faf 100644 --- a/apps/twofactor_backupcodes/l10n/en_GB.js +++ b/apps/twofactor_backupcodes/l10n/en_GB.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "activated", - "updated" : "updated", - "mounted" : "mounted", - "deactivated" : "deactivated", - "beforeCreate" : "beforeCreate", - "created" : "created", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destroyed", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later", "Save backup codes" : "Save backup codes", "Print backup codes" : "Print backup codes", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "A two-factor auth backup codes provider", "Use one of the backup codes you saved when setting up two-factor authentication." : "Use one of the backup codes you saved when setting up two-factor authentication.", "Submit" : "Submit", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used.", + "activated" : "activated", + "updated" : "updated", + "mounted" : "mounted", + "deactivated" : "deactivated", + "beforeCreate" : "beforeCreate", + "created" : "created", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destroyed", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/en_GB.json b/apps/twofactor_backupcodes/l10n/en_GB.json index 838ce57c518..dbf755ace65 100644 --- a/apps/twofactor_backupcodes/l10n/en_GB.json +++ b/apps/twofactor_backupcodes/l10n/en_GB.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "activated", - "updated" : "updated", - "mounted" : "mounted", - "deactivated" : "deactivated", - "beforeCreate" : "beforeCreate", - "created" : "created", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destroyed", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later", "Save backup codes" : "Save backup codes", "Print backup codes" : "Print backup codes", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "A two-factor auth backup codes provider", "Use one of the backup codes you saved when setting up two-factor authentication." : "Use one of the backup codes you saved when setting up two-factor authentication.", "Submit" : "Submit", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used.", + "activated" : "activated", + "updated" : "updated", + "mounted" : "mounted", + "deactivated" : "deactivated", + "beforeCreate" : "beforeCreate", + "created" : "created", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destroyed", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/es.js b/apps/twofactor_backupcodes/l10n/es.js index dfbf1bbe3b9..c76e49aad02 100644 --- a/apps/twofactor_backupcodes/l10n/es.js +++ b/apps/twofactor_backupcodes/l10n/es.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "activado", - "updated" : "actualizado", - "mounted" : "montado", - "deactivated" : "desactivado", - "beforeCreate" : "beforeCreate", - "created" : "creado", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destruido", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estos son sus códigos de respaldo. Por favor guardelos y/o imprimalos ya que no podrá obtenerlos de nuevo.", "Save backup codes" : "Guardar códigos de respaldo", "Print backup codes" : "Imprimir códigos de respaldo", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Un proveedor de códigos respaldo para verificación en dos pasos", "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno de los códigos de respaldo que guardaste cuando activaste la verificación en dos pasos.", "Submit" : "Enviar", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}.", + "activated" : "activado", + "updated" : "actualizado", + "mounted" : "montado", + "deactivated" : "desactivado", + "beforeCreate" : "beforeCreate", + "created" : "creado", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destruido", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/es.json b/apps/twofactor_backupcodes/l10n/es.json index af56e6d9a0e..a420c02acf8 100644 --- a/apps/twofactor_backupcodes/l10n/es.json +++ b/apps/twofactor_backupcodes/l10n/es.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "activado", - "updated" : "actualizado", - "mounted" : "montado", - "deactivated" : "desactivado", - "beforeCreate" : "beforeCreate", - "created" : "creado", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destruido", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estos son sus códigos de respaldo. Por favor guardelos y/o imprimalos ya que no podrá obtenerlos de nuevo.", "Save backup codes" : "Guardar códigos de respaldo", "Print backup codes" : "Imprimir códigos de respaldo", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Un proveedor de códigos respaldo para verificación en dos pasos", "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno de los códigos de respaldo que guardaste cuando activaste la verificación en dos pasos.", "Submit" : "Enviar", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}.", + "activated" : "activado", + "updated" : "actualizado", + "mounted" : "montado", + "deactivated" : "desactivado", + "beforeCreate" : "beforeCreate", + "created" : "creado", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destruido", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/fr.js b/apps/twofactor_backupcodes/l10n/fr.js index 0695524be23..7186f82dff7 100644 --- a/apps/twofactor_backupcodes/l10n/fr.js +++ b/apps/twofactor_backupcodes/l10n/fr.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "activé", - "updated" : "mis à jour", - "mounted" : "Monté", - "deactivated" : "désactivé", - "beforeCreate" : "Avant la création", - "created" : "créé", - "beforeUpdate" : "Avant la mise à jour", - "beforeDestroy" : "Avant la suppresion", - "destroyed" : "détruit", - "beforeMount" : "Avant montage", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Voici vos codes de récupération. Veuillez les sauvegarder et/ou les imprimer car vous ne pourrez plus y avoir accès ultérieurement", "Save backup codes" : "Sauvegarder les codes de récupération", "Print backup codes" : "Imprimer les codes de récupération", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Un fournisseur de codes de récupération d'authentification à deux facteurs", "Use one of the backup codes you saved when setting up two-factor authentication." : "Utilisez l'un des codes de secours que vous avez crée lors du paramétrage de l'authentification à deux facteurs.", "Submit" : "Envoyer", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés.", + "activated" : "activé", + "updated" : "mis à jour", + "mounted" : "Monté", + "deactivated" : "désactivé", + "beforeCreate" : "Avant la création", + "created" : "créé", + "beforeUpdate" : "Avant la mise à jour", + "beforeDestroy" : "Avant la suppresion", + "destroyed" : "détruit", + "beforeMount" : "Avant montage" }, "nplurals=2; plural=(n > 1);"); diff --git a/apps/twofactor_backupcodes/l10n/fr.json b/apps/twofactor_backupcodes/l10n/fr.json index b96a9f4ebb8..8052387cd0c 100644 --- a/apps/twofactor_backupcodes/l10n/fr.json +++ b/apps/twofactor_backupcodes/l10n/fr.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "activé", - "updated" : "mis à jour", - "mounted" : "Monté", - "deactivated" : "désactivé", - "beforeCreate" : "Avant la création", - "created" : "créé", - "beforeUpdate" : "Avant la mise à jour", - "beforeDestroy" : "Avant la suppresion", - "destroyed" : "détruit", - "beforeMount" : "Avant montage", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Voici vos codes de récupération. Veuillez les sauvegarder et/ou les imprimer car vous ne pourrez plus y avoir accès ultérieurement", "Save backup codes" : "Sauvegarder les codes de récupération", "Print backup codes" : "Imprimer les codes de récupération", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Un fournisseur de codes de récupération d'authentification à deux facteurs", "Use one of the backup codes you saved when setting up two-factor authentication." : "Utilisez l'un des codes de secours que vous avez crée lors du paramétrage de l'authentification à deux facteurs.", "Submit" : "Envoyer", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés.", + "activated" : "activé", + "updated" : "mis à jour", + "mounted" : "Monté", + "deactivated" : "désactivé", + "beforeCreate" : "Avant la création", + "created" : "créé", + "beforeUpdate" : "Avant la mise à jour", + "beforeDestroy" : "Avant la suppresion", + "destroyed" : "détruit", + "beforeMount" : "Avant montage" },"pluralForm" :"nplurals=2; plural=(n > 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/gl.js b/apps/twofactor_backupcodes/l10n/gl.js index 8ba24096413..954d511553f 100644 --- a/apps/twofactor_backupcodes/l10n/gl.js +++ b/apps/twofactor_backupcodes/l10n/gl.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "activado", - "updated" : "actualizado", - "mounted" : "montado", - "deactivated" : "desactivado", - "beforeCreate" : "antesDaCreación", - "created" : "creado", - "beforeUpdate" : "antesDaActualización", - "beforeDestroy" : "antesDaDestrución", - "destroyed" : "destruído", - "beforeMount" : "antesDaMontaxe", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes son os seus códigos de seguranza. Gárdeos e/ou imprímaos xa que non poderá volver lelos de novo.", "Save backup codes" : "Gardar os códigos de seguranza", "Print backup codes" : "Imprimir os códigos de seguranza", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Un provedor de códigos de seguranza para a autenticación de dous factores", "Use one of the backup codes you saved when setting up two-factor authentication." : "Use un dos códigos de seguranza que gardou cuando axustou a autenticación de dous factores.", "Submit" : "Enviar ", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}.", + "activated" : "activado", + "updated" : "actualizado", + "mounted" : "montado", + "deactivated" : "desactivado", + "beforeCreate" : "antesDaCreación", + "created" : "creado", + "beforeUpdate" : "antesDaActualización", + "beforeDestroy" : "antesDaDestrución", + "destroyed" : "destruído", + "beforeMount" : "antesDaMontaxe" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/gl.json b/apps/twofactor_backupcodes/l10n/gl.json index 2bdd624c169..64b13b3136c 100644 --- a/apps/twofactor_backupcodes/l10n/gl.json +++ b/apps/twofactor_backupcodes/l10n/gl.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "activado", - "updated" : "actualizado", - "mounted" : "montado", - "deactivated" : "desactivado", - "beforeCreate" : "antesDaCreación", - "created" : "creado", - "beforeUpdate" : "antesDaActualización", - "beforeDestroy" : "antesDaDestrución", - "destroyed" : "destruído", - "beforeMount" : "antesDaMontaxe", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes son os seus códigos de seguranza. Gárdeos e/ou imprímaos xa que non poderá volver lelos de novo.", "Save backup codes" : "Gardar os códigos de seguranza", "Print backup codes" : "Imprimir os códigos de seguranza", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Un provedor de códigos de seguranza para a autenticación de dous factores", "Use one of the backup codes you saved when setting up two-factor authentication." : "Use un dos códigos de seguranza que gardou cuando axustou a autenticación de dous factores.", "Submit" : "Enviar ", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}.", + "activated" : "activado", + "updated" : "actualizado", + "mounted" : "montado", + "deactivated" : "desactivado", + "beforeCreate" : "antesDaCreación", + "created" : "creado", + "beforeUpdate" : "antesDaActualización", + "beforeDestroy" : "antesDaDestrución", + "destroyed" : "destruído", + "beforeMount" : "antesDaMontaxe" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/hu.js b/apps/twofactor_backupcodes/l10n/hu.js index 4d9f15f3777..16d3bcc3e59 100644 --- a/apps/twofactor_backupcodes/l10n/hu.js +++ b/apps/twofactor_backupcodes/l10n/hu.js @@ -1,8 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "Aktivált", - "updated" : "frissítve", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ezek a biztonsági kódjaid. Kérlek mentsd el vagy nyomtasd ki őket úgy hogy később is meglegyenek.", "Save backup codes" : "Biztonsági kódok mentése", "Print backup codes" : "Biztonsági kódok nyomtatása", @@ -18,6 +16,8 @@ OC.L10N.register( "Two factor backup codes" : "Kétfaktoros biztonsági mentési kódok", "A two-factor auth backup codes provider" : "Kétfaktoros azonosítás biztonsági kódok szolgáltatója", "Submit" : "Küldés", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}.", + "activated" : "Aktivált", + "updated" : "frissítve" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/hu.json b/apps/twofactor_backupcodes/l10n/hu.json index 299f11dc616..53adb544296 100644 --- a/apps/twofactor_backupcodes/l10n/hu.json +++ b/apps/twofactor_backupcodes/l10n/hu.json @@ -1,6 +1,4 @@ { "translations": { - "activated" : "Aktivált", - "updated" : "frissítve", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ezek a biztonsági kódjaid. Kérlek mentsd el vagy nyomtasd ki őket úgy hogy később is meglegyenek.", "Save backup codes" : "Biztonsági kódok mentése", "Print backup codes" : "Biztonsági kódok nyomtatása", @@ -16,6 +14,8 @@ "Two factor backup codes" : "Kétfaktoros biztonsági mentési kódok", "A two-factor auth backup codes provider" : "Kétfaktoros azonosítás biztonsági kódok szolgáltatója", "Submit" : "Küldés", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}.", + "activated" : "Aktivált", + "updated" : "frissítve" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/is.js b/apps/twofactor_backupcodes/l10n/is.js index ab7b8da6797..d1975286eeb 100644 --- a/apps/twofactor_backupcodes/l10n/is.js +++ b/apps/twofactor_backupcodes/l10n/is.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "virkjað", - "updated" : "uppfært", - "mounted" : "tengt í skráakerfi", - "deactivated" : "afvirkjað", - "beforeCreate" : "beforeCreate", - "created" : "búið til", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "eyðilagt", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Þetta eru öryggisafritunarkóðarnir þínir. Vistaðu þá og/eða prentaðu þá út, því þú munt ekki geta lesið þá aftur síðar í ferlinu", "Save backup codes" : "Vista öryggisafritunarkóða", "Print backup codes" : "Prenta öryggisafritunarkóða", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Útgefandi tveggja-þrepa öryggisafritunarkóða", "Use one of the backup codes you saved when setting up two-factor authentication." : "Notaðu einn af öryggisafritunarkóðunum sem þú vistaðir þegar þú settir upp tveggja-þátta auðkenningu.", "Submit" : "Senda inn", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir.", + "activated" : "virkjað", + "updated" : "uppfært", + "mounted" : "tengt í skráakerfi", + "deactivated" : "afvirkjað", + "beforeCreate" : "beforeCreate", + "created" : "búið til", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "eyðilagt", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);"); diff --git a/apps/twofactor_backupcodes/l10n/is.json b/apps/twofactor_backupcodes/l10n/is.json index f0a86db945f..0f4796b657a 100644 --- a/apps/twofactor_backupcodes/l10n/is.json +++ b/apps/twofactor_backupcodes/l10n/is.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "virkjað", - "updated" : "uppfært", - "mounted" : "tengt í skráakerfi", - "deactivated" : "afvirkjað", - "beforeCreate" : "beforeCreate", - "created" : "búið til", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "eyðilagt", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Þetta eru öryggisafritunarkóðarnir þínir. Vistaðu þá og/eða prentaðu þá út, því þú munt ekki geta lesið þá aftur síðar í ferlinu", "Save backup codes" : "Vista öryggisafritunarkóða", "Print backup codes" : "Prenta öryggisafritunarkóða", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Útgefandi tveggja-þrepa öryggisafritunarkóða", "Use one of the backup codes you saved when setting up two-factor authentication." : "Notaðu einn af öryggisafritunarkóðunum sem þú vistaðir þegar þú settir upp tveggja-þátta auðkenningu.", "Submit" : "Senda inn", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir.", + "activated" : "virkjað", + "updated" : "uppfært", + "mounted" : "tengt í skráakerfi", + "deactivated" : "afvirkjað", + "beforeCreate" : "beforeCreate", + "created" : "búið til", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "eyðilagt", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/it.js b/apps/twofactor_backupcodes/l10n/it.js index f94283acd5d..03a034179e4 100644 --- a/apps/twofactor_backupcodes/l10n/it.js +++ b/apps/twofactor_backupcodes/l10n/it.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "attivati", - "updated" : "aggiornati", - "mounted" : "montati", - "deactivated" : "disattivati", - "beforeCreate" : "beforeCreate", - "created" : "creati", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "distrutti", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Questi sono i tuoi codici di backup. Salvali e/o stampali poiché non potrai più leggerli successivamente", "Save backup codes" : "Salva i codici di backup", "Print backup codes" : "Stampa i codici di backup", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Un fornitore di codici di backup per l'autenticazione a due fattori", "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno dei codici di backup che hai salvato quando configuri l'autenticazione a due fattori.", "Submit" : "Invia", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati.", + "activated" : "attivati", + "updated" : "aggiornati", + "mounted" : "montati", + "deactivated" : "disattivati", + "beforeCreate" : "beforeCreate", + "created" : "creati", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "distrutti", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/it.json b/apps/twofactor_backupcodes/l10n/it.json index 2e2f9716a10..eb53c62be07 100644 --- a/apps/twofactor_backupcodes/l10n/it.json +++ b/apps/twofactor_backupcodes/l10n/it.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "attivati", - "updated" : "aggiornati", - "mounted" : "montati", - "deactivated" : "disattivati", - "beforeCreate" : "beforeCreate", - "created" : "creati", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "distrutti", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Questi sono i tuoi codici di backup. Salvali e/o stampali poiché non potrai più leggerli successivamente", "Save backup codes" : "Salva i codici di backup", "Print backup codes" : "Stampa i codici di backup", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Un fornitore di codici di backup per l'autenticazione a due fattori", "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno dei codici di backup che hai salvato quando configuri l'autenticazione a due fattori.", "Submit" : "Invia", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati.", + "activated" : "attivati", + "updated" : "aggiornati", + "mounted" : "montati", + "deactivated" : "disattivati", + "beforeCreate" : "beforeCreate", + "created" : "creati", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "distrutti", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/ja.js b/apps/twofactor_backupcodes/l10n/ja.js index 130c24a784a..59c825b25ad 100644 --- a/apps/twofactor_backupcodes/l10n/ja.js +++ b/apps/twofactor_backupcodes/l10n/ja.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "活性化されました", - "updated" : "アップデートされました", - "mounted" : "マウントされました", - "deactivated" : "失効した", - "beforeCreate" : "作成前", - "created" : "作成されました", - "beforeUpdate" : "更新前", - "beforeDestroy" : "破棄前", - "destroyed" : "破棄されました", - "beforeMount" : "マウント前", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "これらはあなたのバックアップコードです。 後からこのコードは見ることはできないので、保存するか印刷しておいてください", "Save backup codes" : "バックアップコードを保存", "Print backup codes" : "バックアップコードを印刷", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "2要素認証バックアップコードプロバイダ", "Use one of the backup codes you saved when setting up two-factor authentication." : "2要素認証を設定するときに保存したバックアップコードのいずれかを使用します。", "Submit" : "了解", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。" + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。", + "activated" : "活性化されました", + "updated" : "アップデートされました", + "mounted" : "マウントされました", + "deactivated" : "失効した", + "beforeCreate" : "作成前", + "created" : "作成されました", + "beforeUpdate" : "更新前", + "beforeDestroy" : "破棄前", + "destroyed" : "破棄されました", + "beforeMount" : "マウント前" }, "nplurals=1; plural=0;"); diff --git a/apps/twofactor_backupcodes/l10n/ja.json b/apps/twofactor_backupcodes/l10n/ja.json index 5c9c927f7d8..f4711c7f0f8 100644 --- a/apps/twofactor_backupcodes/l10n/ja.json +++ b/apps/twofactor_backupcodes/l10n/ja.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "活性化されました", - "updated" : "アップデートされました", - "mounted" : "マウントされました", - "deactivated" : "失効した", - "beforeCreate" : "作成前", - "created" : "作成されました", - "beforeUpdate" : "更新前", - "beforeDestroy" : "破棄前", - "destroyed" : "破棄されました", - "beforeMount" : "マウント前", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "これらはあなたのバックアップコードです。 後からこのコードは見ることはできないので、保存するか印刷しておいてください", "Save backup codes" : "バックアップコードを保存", "Print backup codes" : "バックアップコードを印刷", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "2要素認証バックアップコードプロバイダ", "Use one of the backup codes you saved when setting up two-factor authentication." : "2要素認証を設定するときに保存したバックアップコードのいずれかを使用します。", "Submit" : "了解", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。" + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。", + "activated" : "活性化されました", + "updated" : "アップデートされました", + "mounted" : "マウントされました", + "deactivated" : "失効した", + "beforeCreate" : "作成前", + "created" : "作成されました", + "beforeUpdate" : "更新前", + "beforeDestroy" : "破棄前", + "destroyed" : "破棄されました", + "beforeMount" : "マウント前" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/nb.js b/apps/twofactor_backupcodes/l10n/nb.js index 0287b16aace..12c1a0c33d3 100644 --- a/apps/twofactor_backupcodes/l10n/nb.js +++ b/apps/twofactor_backupcodes/l10n/nb.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "aktivert", - "updated" : "oppdatert", - "mounted" : "tilkoblet", - "deactivated" : "deaktivert", - "beforeCreate" : "beforeCreate", - "created" : "opprettet", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "ødelagt", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dette er sikkerhetskopi-kodene. Lagre og/eller skriv dem ut siden du ikke vil kunne se kodene her igjen senere.", "Save backup codes" : "Lagre sikkerhetskopi-kodene", "Print backup codes" : "Skriv ut sikkerhetskopi-koder", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "En leverandør av sikkerhetskopi av to-faktor koder", "Use one of the backup codes you saved when setting up two-factor authentication." : "Bruk en av backup kodene du lagret når du opprettet to-faktor autentisering.", "Submit" : "Send", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk.", + "activated" : "aktivert", + "updated" : "oppdatert", + "mounted" : "tilkoblet", + "deactivated" : "deaktivert", + "beforeCreate" : "beforeCreate", + "created" : "opprettet", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "ødelagt", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/nb.json b/apps/twofactor_backupcodes/l10n/nb.json index 14a0dfe4b41..f74857770d5 100644 --- a/apps/twofactor_backupcodes/l10n/nb.json +++ b/apps/twofactor_backupcodes/l10n/nb.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "aktivert", - "updated" : "oppdatert", - "mounted" : "tilkoblet", - "deactivated" : "deaktivert", - "beforeCreate" : "beforeCreate", - "created" : "opprettet", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "ødelagt", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dette er sikkerhetskopi-kodene. Lagre og/eller skriv dem ut siden du ikke vil kunne se kodene her igjen senere.", "Save backup codes" : "Lagre sikkerhetskopi-kodene", "Print backup codes" : "Skriv ut sikkerhetskopi-koder", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "En leverandør av sikkerhetskopi av to-faktor koder", "Use one of the backup codes you saved when setting up two-factor authentication." : "Bruk en av backup kodene du lagret når du opprettet to-faktor autentisering.", "Submit" : "Send", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk.", + "activated" : "aktivert", + "updated" : "oppdatert", + "mounted" : "tilkoblet", + "deactivated" : "deaktivert", + "beforeCreate" : "beforeCreate", + "created" : "opprettet", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "ødelagt", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/nl.js b/apps/twofactor_backupcodes/l10n/nl.js index 3e4e61f4056..20ad8d799b7 100644 --- a/apps/twofactor_backupcodes/l10n/nl.js +++ b/apps/twofactor_backupcodes/l10n/nl.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "geactiveerd", - "updated" : "geüpdatet", - "mounted" : "aangekoppeld", - "deactivated" : "uitgeschakeld", - "beforeCreate" : "beforeCreate", - "created" : "gecreëerd", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "vernietigd", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dit zijn je back-upcodes. Bewaar ze en/of druk ze alsjeblieft af, want je ze niet later nog een keer opvragen.", "Save backup codes" : "Bewaren backup code", "Print backup codes" : "Afdrukken backup code", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Een two-factor auth backup codes provider", "Use one of the backup codes you saved when setting up two-factor authentication." : "Gebruik een van de backupcodes die je bewaarde bij het inschakelen van de twee-factor authenticatie.", "Submit" : "Verwerken", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt.", + "activated" : "geactiveerd", + "updated" : "geüpdatet", + "mounted" : "aangekoppeld", + "deactivated" : "uitgeschakeld", + "beforeCreate" : "beforeCreate", + "created" : "gecreëerd", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "vernietigd", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/nl.json b/apps/twofactor_backupcodes/l10n/nl.json index cf8712fb5c9..92e9d98d35e 100644 --- a/apps/twofactor_backupcodes/l10n/nl.json +++ b/apps/twofactor_backupcodes/l10n/nl.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "geactiveerd", - "updated" : "geüpdatet", - "mounted" : "aangekoppeld", - "deactivated" : "uitgeschakeld", - "beforeCreate" : "beforeCreate", - "created" : "gecreëerd", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "vernietigd", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dit zijn je back-upcodes. Bewaar ze en/of druk ze alsjeblieft af, want je ze niet later nog een keer opvragen.", "Save backup codes" : "Bewaren backup code", "Print backup codes" : "Afdrukken backup code", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Een two-factor auth backup codes provider", "Use one of the backup codes you saved when setting up two-factor authentication." : "Gebruik een van de backupcodes die je bewaarde bij het inschakelen van de twee-factor authenticatie.", "Submit" : "Verwerken", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt.", + "activated" : "geactiveerd", + "updated" : "geüpdatet", + "mounted" : "aangekoppeld", + "deactivated" : "uitgeschakeld", + "beforeCreate" : "beforeCreate", + "created" : "gecreëerd", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "vernietigd", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/pl.js b/apps/twofactor_backupcodes/l10n/pl.js index 3f99e2faad1..d2f248f26f9 100644 --- a/apps/twofactor_backupcodes/l10n/pl.js +++ b/apps/twofactor_backupcodes/l10n/pl.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "aktowowane", - "updated" : "zaktualizowane", - "mounted" : "zamontowane", - "deactivated" : "zdezaktywowane", - "beforeCreate" : "przed utworzeniem", - "created" : "utworzone", - "beforeUpdate" : "przed aktualizacją", - "beforeDestroy" : "przed zniszczeniem", - "destroyed" : "zniszczone", - "beforeMount" : "przed zamontowaniem", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "To są kody zapasowe. Proszę je zapisać i/lub wydrukować, ponieważ później nie będzie można ich ponownie odczytać", "Save backup codes" : "Zapisz kody zapasowe", "Print backup codes" : "Drukuj kody zapasowe", @@ -26,6 +16,16 @@ OC.L10N.register( "Use backup code" : "Użyj kodu zapasowego", "Two factor backup codes" : "Kody zapasowe uwierzytelnienia dwuskładnikowego", "A two-factor auth backup codes provider" : "Dostawca dwuskładnikowych kodów zapasowych ", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych.", + "activated" : "aktowowane", + "updated" : "zaktualizowane", + "mounted" : "zamontowane", + "deactivated" : "zdezaktywowane", + "beforeCreate" : "przed utworzeniem", + "created" : "utworzone", + "beforeUpdate" : "przed aktualizacją", + "beforeDestroy" : "przed zniszczeniem", + "destroyed" : "zniszczone", + "beforeMount" : "przed zamontowaniem" }, "nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);"); diff --git a/apps/twofactor_backupcodes/l10n/pl.json b/apps/twofactor_backupcodes/l10n/pl.json index 9b77503d3be..be9ed319faa 100644 --- a/apps/twofactor_backupcodes/l10n/pl.json +++ b/apps/twofactor_backupcodes/l10n/pl.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "aktowowane", - "updated" : "zaktualizowane", - "mounted" : "zamontowane", - "deactivated" : "zdezaktywowane", - "beforeCreate" : "przed utworzeniem", - "created" : "utworzone", - "beforeUpdate" : "przed aktualizacją", - "beforeDestroy" : "przed zniszczeniem", - "destroyed" : "zniszczone", - "beforeMount" : "przed zamontowaniem", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "To są kody zapasowe. Proszę je zapisać i/lub wydrukować, ponieważ później nie będzie można ich ponownie odczytać", "Save backup codes" : "Zapisz kody zapasowe", "Print backup codes" : "Drukuj kody zapasowe", @@ -24,6 +14,16 @@ "Use backup code" : "Użyj kodu zapasowego", "Two factor backup codes" : "Kody zapasowe uwierzytelnienia dwuskładnikowego", "A two-factor auth backup codes provider" : "Dostawca dwuskładnikowych kodów zapasowych ", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych.", + "activated" : "aktowowane", + "updated" : "zaktualizowane", + "mounted" : "zamontowane", + "deactivated" : "zdezaktywowane", + "beforeCreate" : "przed utworzeniem", + "created" : "utworzone", + "beforeUpdate" : "przed aktualizacją", + "beforeDestroy" : "przed zniszczeniem", + "destroyed" : "zniszczone", + "beforeMount" : "przed zamontowaniem" },"pluralForm" :"nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/pt_BR.js b/apps/twofactor_backupcodes/l10n/pt_BR.js index fedd9dba1e4..ddd691e69c1 100644 --- a/apps/twofactor_backupcodes/l10n/pt_BR.js +++ b/apps/twofactor_backupcodes/l10n/pt_BR.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "ativado", - "updated" : "atualizado", - "mounted" : "montado", - "deactivated" : "desativado", - "beforeCreate" : "beforeCreate", - "created" : "criado", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destruído", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes são os seus códigos de backup. Salve e/ou imprima-os, pois não será possível ler os códigos novamente mais tarde", "Save backup codes" : "Salvar códigos de backup", "Print backup codes" : "Imprimir códigos de backup", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Um provedor de códigos de backup de autenticação de dois fatores", "Use one of the backup codes you saved when setting up two-factor authentication." : "Use um dos códigos de backup que você salvou ao configurar a autenticação de dois fatores.", "Submit" : "Enviar", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados.", + "activated" : "ativado", + "updated" : "atualizado", + "mounted" : "montado", + "deactivated" : "desativado", + "beforeCreate" : "beforeCreate", + "created" : "criado", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destruído", + "beforeMount" : "beforeMount" }, "nplurals=2; plural=(n > 1);"); diff --git a/apps/twofactor_backupcodes/l10n/pt_BR.json b/apps/twofactor_backupcodes/l10n/pt_BR.json index 3f9aa0e0e93..e67bc8a466e 100644 --- a/apps/twofactor_backupcodes/l10n/pt_BR.json +++ b/apps/twofactor_backupcodes/l10n/pt_BR.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "ativado", - "updated" : "atualizado", - "mounted" : "montado", - "deactivated" : "desativado", - "beforeCreate" : "beforeCreate", - "created" : "criado", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destruído", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes são os seus códigos de backup. Salve e/ou imprima-os, pois não será possível ler os códigos novamente mais tarde", "Save backup codes" : "Salvar códigos de backup", "Print backup codes" : "Imprimir códigos de backup", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Um provedor de códigos de backup de autenticação de dois fatores", "Use one of the backup codes you saved when setting up two-factor authentication." : "Use um dos códigos de backup que você salvou ao configurar a autenticação de dois fatores.", "Submit" : "Enviar", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados.", + "activated" : "ativado", + "updated" : "atualizado", + "mounted" : "montado", + "deactivated" : "desativado", + "beforeCreate" : "beforeCreate", + "created" : "criado", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destruído", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=2; plural=(n > 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/ru.js b/apps/twofactor_backupcodes/l10n/ru.js index c638234eb53..9847b1392ce 100644 --- a/apps/twofactor_backupcodes/l10n/ru.js +++ b/apps/twofactor_backupcodes/l10n/ru.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "activated", - "updated" : "updated", - "mounted" : "mounted", - "deactivated" : "deactivated", - "beforeCreate" : "beforeCreate", - "created" : "created", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destroyed", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Это ваши резервные коды доступа. Пожалуйста, сохраните и/или распечатайте их, так как вы не сможете увидеть эти коды снова.", "Save backup codes" : "Сохранить резервные коды", "Print backup codes" : "Распечатать резервные коды", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Провайдер резервных копий для кодов двухфакторной аутентификации", "Use one of the backup codes you saved when setting up two-factor authentication." : "Использовать для двухфакторной аутентификации один из ранее выпущенных резервных кодов.", "Submit" : "Отправить", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов.", + "activated" : "activated", + "updated" : "updated", + "mounted" : "mounted", + "deactivated" : "deactivated", + "beforeCreate" : "beforeCreate", + "created" : "created", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destroyed", + "beforeMount" : "beforeMount" }, "nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);"); diff --git a/apps/twofactor_backupcodes/l10n/ru.json b/apps/twofactor_backupcodes/l10n/ru.json index 6af211d8b17..338833fa225 100644 --- a/apps/twofactor_backupcodes/l10n/ru.json +++ b/apps/twofactor_backupcodes/l10n/ru.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "activated", - "updated" : "updated", - "mounted" : "mounted", - "deactivated" : "deactivated", - "beforeCreate" : "beforeCreate", - "created" : "created", - "beforeUpdate" : "beforeUpdate", - "beforeDestroy" : "beforeDestroy", - "destroyed" : "destroyed", - "beforeMount" : "beforeMount", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Это ваши резервные коды доступа. Пожалуйста, сохраните и/или распечатайте их, так как вы не сможете увидеть эти коды снова.", "Save backup codes" : "Сохранить резервные коды", "Print backup codes" : "Распечатать резервные коды", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Провайдер резервных копий для кодов двухфакторной аутентификации", "Use one of the backup codes you saved when setting up two-factor authentication." : "Использовать для двухфакторной аутентификации один из ранее выпущенных резервных кодов.", "Submit" : "Отправить", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов.", + "activated" : "activated", + "updated" : "updated", + "mounted" : "mounted", + "deactivated" : "deactivated", + "beforeCreate" : "beforeCreate", + "created" : "created", + "beforeUpdate" : "beforeUpdate", + "beforeDestroy" : "beforeDestroy", + "destroyed" : "destroyed", + "beforeMount" : "beforeMount" },"pluralForm" :"nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/sr.js b/apps/twofactor_backupcodes/l10n/sr.js index f4619a849f3..f83220e8dc7 100644 --- a/apps/twofactor_backupcodes/l10n/sr.js +++ b/apps/twofactor_backupcodes/l10n/sr.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "активирано", - "updated" : "ажурирано", - "mounted" : "монтирано", - "deactivated" : "деактивирано", - "beforeCreate" : "преКреирања", - "created" : "креирано", - "beforeUpdate" : "преАжурирања", - "beforeDestroy" : "преУништења", - "destroyed" : "уништено", - "beforeMount" : "преМонтирања", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ово су Ваши резервни кодови. Сачувајте их и/или их одштампајте пошто више нећете моћи да их прочитате.", "Save backup codes" : "Сачувај резервне кодове", "Print backup codes" : "Одштампај резервне кодове", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "Провајдер резервних кодова за двофакторску ауторизацију", "Use one of the backup codes you saved when setting up two-factor authentication." : "Искористите један од резервних кодова које сте сачували када се подешавали двофакторску проверу идентитета.", "Submit" : "Пошаљи", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено.", + "activated" : "активирано", + "updated" : "ажурирано", + "mounted" : "монтирано", + "deactivated" : "деактивирано", + "beforeCreate" : "преКреирања", + "created" : "креирано", + "beforeUpdate" : "преАжурирања", + "beforeDestroy" : "преУништења", + "destroyed" : "уништено", + "beforeMount" : "преМонтирања" }, "nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);"); diff --git a/apps/twofactor_backupcodes/l10n/sr.json b/apps/twofactor_backupcodes/l10n/sr.json index c40fb428de5..b0c863254f8 100644 --- a/apps/twofactor_backupcodes/l10n/sr.json +++ b/apps/twofactor_backupcodes/l10n/sr.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "активирано", - "updated" : "ажурирано", - "mounted" : "монтирано", - "deactivated" : "деактивирано", - "beforeCreate" : "преКреирања", - "created" : "креирано", - "beforeUpdate" : "преАжурирања", - "beforeDestroy" : "преУништења", - "destroyed" : "уништено", - "beforeMount" : "преМонтирања", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ово су Ваши резервни кодови. Сачувајте их и/или их одштампајте пошто више нећете моћи да их прочитате.", "Save backup codes" : "Сачувај резервне кодове", "Print backup codes" : "Одштампај резервне кодове", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "Провајдер резервних кодова за двофакторску ауторизацију", "Use one of the backup codes you saved when setting up two-factor authentication." : "Искористите један од резервних кодова које сте сачували када се подешавали двофакторску проверу идентитета.", "Submit" : "Пошаљи", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено.", + "activated" : "активирано", + "updated" : "ажурирано", + "mounted" : "монтирано", + "deactivated" : "деактивирано", + "beforeCreate" : "преКреирања", + "created" : "креирано", + "beforeUpdate" : "преАжурирања", + "beforeDestroy" : "преУништења", + "destroyed" : "уништено", + "beforeMount" : "преМонтирања" },"pluralForm" :"nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/sv.js b/apps/twofactor_backupcodes/l10n/sv.js index b222aa0a5e7..a7b5b1336f0 100644 --- a/apps/twofactor_backupcodes/l10n/sv.js +++ b/apps/twofactor_backupcodes/l10n/sv.js @@ -1,11 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "aktiverad", - "updated" : "uppdaterad", - "mounted" : "monterad", - "deactivated" : "inaktiverad", - "created" : "skapad", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Detta är dina återställningsnycklar. Vänligen spara och/eller skriv ut dem eftersom du inte kommer kunna se dessa nycklar igen.", "Save backup codes" : "Spara återställningsnycklar", "Print backup codes" : "Skriv ut återställningsnycklar", @@ -18,6 +13,11 @@ OC.L10N.register( "Second-factor backup codes" : "Tvåfaktorsautentisering", "Backup code" : "Återställningsnyckel", "Use backup code" : "Använd återställningsnyckel", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts.", + "activated" : "aktiverad", + "updated" : "uppdaterad", + "mounted" : "monterad", + "deactivated" : "inaktiverad", + "created" : "skapad" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/twofactor_backupcodes/l10n/sv.json b/apps/twofactor_backupcodes/l10n/sv.json index ff6dd4b59d1..18b8b8406b4 100644 --- a/apps/twofactor_backupcodes/l10n/sv.json +++ b/apps/twofactor_backupcodes/l10n/sv.json @@ -1,9 +1,4 @@ { "translations": { - "activated" : "aktiverad", - "updated" : "uppdaterad", - "mounted" : "monterad", - "deactivated" : "inaktiverad", - "created" : "skapad", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Detta är dina återställningsnycklar. Vänligen spara och/eller skriv ut dem eftersom du inte kommer kunna se dessa nycklar igen.", "Save backup codes" : "Spara återställningsnycklar", "Print backup codes" : "Skriv ut återställningsnycklar", @@ -16,6 +11,11 @@ "Second-factor backup codes" : "Tvåfaktorsautentisering", "Backup code" : "Återställningsnyckel", "Use backup code" : "Använd återställningsnyckel", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts.", + "activated" : "aktiverad", + "updated" : "uppdaterad", + "mounted" : "monterad", + "deactivated" : "inaktiverad", + "created" : "skapad" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/tr.js b/apps/twofactor_backupcodes/l10n/tr.js index cdd6fa5058e..7bdcaa895a2 100644 --- a/apps/twofactor_backupcodes/l10n/tr.js +++ b/apps/twofactor_backupcodes/l10n/tr.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "etkinleştirildi", - "updated" : "güncellendi", - "mounted" : "bağlandı", - "deactivated" : "devre dışı bırakıldı", - "beforeCreate" : "eklenmedenOnce", - "created" : "eklenme", - "beforeUpdate" : "guncellenmedenOnce", - "beforeDestroy" : "yokEdilmedenOnce", - "destroyed" : "yokEdildi", - "beforeMount" : "baglanmadanOnce", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Yedek kodlarınızı burada görebilirsiniz. Kodları daha sonra göremeyeceğiniz için bu kodları kaydedin ya da yazdırın", "Save backup codes" : "Yedek kodları kaydet", "Print backup codes" : "Yedek kodları yazdır", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "İki aşamalı kimlik doğrulaması için yedek kodlar sağlayıcısı", "Use one of the backup codes you saved when setting up two-factor authentication." : "İki aşamalı kimlik doğrulamasını ayarlarken yedek kodlarından birini kullanın.", "Submit" : "Gönder", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor.", + "activated" : "etkinleştirildi", + "updated" : "güncellendi", + "mounted" : "bağlandı", + "deactivated" : "devre dışı bırakıldı", + "beforeCreate" : "eklenmedenOnce", + "created" : "eklenme", + "beforeUpdate" : "guncellenmedenOnce", + "beforeDestroy" : "yokEdilmedenOnce", + "destroyed" : "yokEdildi", + "beforeMount" : "baglanmadanOnce" }, "nplurals=2; plural=(n > 1);"); diff --git a/apps/twofactor_backupcodes/l10n/tr.json b/apps/twofactor_backupcodes/l10n/tr.json index 77b1b650a2e..f3524a2dbd4 100644 --- a/apps/twofactor_backupcodes/l10n/tr.json +++ b/apps/twofactor_backupcodes/l10n/tr.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "etkinleştirildi", - "updated" : "güncellendi", - "mounted" : "bağlandı", - "deactivated" : "devre dışı bırakıldı", - "beforeCreate" : "eklenmedenOnce", - "created" : "eklenme", - "beforeUpdate" : "guncellenmedenOnce", - "beforeDestroy" : "yokEdilmedenOnce", - "destroyed" : "yokEdildi", - "beforeMount" : "baglanmadanOnce", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Yedek kodlarınızı burada görebilirsiniz. Kodları daha sonra göremeyeceğiniz için bu kodları kaydedin ya da yazdırın", "Save backup codes" : "Yedek kodları kaydet", "Print backup codes" : "Yedek kodları yazdır", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "İki aşamalı kimlik doğrulaması için yedek kodlar sağlayıcısı", "Use one of the backup codes you saved when setting up two-factor authentication." : "İki aşamalı kimlik doğrulamasını ayarlarken yedek kodlarından birini kullanın.", "Submit" : "Gönder", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor." + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor.", + "activated" : "etkinleştirildi", + "updated" : "güncellendi", + "mounted" : "bağlandı", + "deactivated" : "devre dışı bırakıldı", + "beforeCreate" : "eklenmedenOnce", + "created" : "eklenme", + "beforeUpdate" : "guncellenmedenOnce", + "beforeDestroy" : "yokEdilmedenOnce", + "destroyed" : "yokEdildi", + "beforeMount" : "baglanmadanOnce" },"pluralForm" :"nplurals=2; plural=(n > 1);" }
\ No newline at end of file diff --git a/apps/twofactor_backupcodes/l10n/zh_TW.js b/apps/twofactor_backupcodes/l10n/zh_TW.js index d66c19d2148..fd2a8fb5aed 100644 --- a/apps/twofactor_backupcodes/l10n/zh_TW.js +++ b/apps/twofactor_backupcodes/l10n/zh_TW.js @@ -1,16 +1,6 @@ OC.L10N.register( "twofactor_backupcodes", { - "activated" : "已啟用", - "updated" : "已更新", - "mounted" : "已掛載", - "deactivated" : "已停用", - "beforeCreate" : "建立前", - "created" : "已建立", - "beforeUpdate" : "更新前", - "beforeDestroy" : "銷毀前", - "destroyed" : "已銷毀", - "beforeMount" : "掛載前", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "以下是您的備用碼，由於備用碼不會再次顯示，請儲存 並/或 列印。", "Save backup codes" : "儲存備用碼", "Print backup codes" : "列印備用碼", @@ -30,6 +20,16 @@ OC.L10N.register( "A two-factor auth backup codes provider" : "兩階段驗證備用碼供應商", "Use one of the backup codes you saved when setting up two-factor authentication." : "設定啟用兩階段驗證時，可輸入其中一個您已儲存的備用碼。", "Submit" : "送出", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過" + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過", + "activated" : "已啟用", + "updated" : "已更新", + "mounted" : "已掛載", + "deactivated" : "已停用", + "beforeCreate" : "建立前", + "created" : "已建立", + "beforeUpdate" : "更新前", + "beforeDestroy" : "銷毀前", + "destroyed" : "已銷毀", + "beforeMount" : "掛載前" }, "nplurals=1; plural=0;"); diff --git a/apps/twofactor_backupcodes/l10n/zh_TW.json b/apps/twofactor_backupcodes/l10n/zh_TW.json index fb934ba1249..e0b586f0f84 100644 --- a/apps/twofactor_backupcodes/l10n/zh_TW.json +++ b/apps/twofactor_backupcodes/l10n/zh_TW.json @@ -1,14 +1,4 @@ { "translations": { - "activated" : "已啟用", - "updated" : "已更新", - "mounted" : "已掛載", - "deactivated" : "已停用", - "beforeCreate" : "建立前", - "created" : "已建立", - "beforeUpdate" : "更新前", - "beforeDestroy" : "銷毀前", - "destroyed" : "已銷毀", - "beforeMount" : "掛載前", "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "以下是您的備用碼，由於備用碼不會再次顯示，請儲存 並/或 列印。", "Save backup codes" : "儲存備用碼", "Print backup codes" : "列印備用碼", @@ -28,6 +18,16 @@ "A two-factor auth backup codes provider" : "兩階段驗證備用碼供應商", "Use one of the backup codes you saved when setting up two-factor authentication." : "設定啟用兩階段驗證時，可輸入其中一個您已儲存的備用碼。", "Submit" : "送出", - "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過" + "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過", + "activated" : "已啟用", + "updated" : "已更新", + "mounted" : "已掛載", + "deactivated" : "已停用", + "beforeCreate" : "建立前", + "created" : "已建立", + "beforeUpdate" : "更新前", + "beforeDestroy" : "銷毀前", + "destroyed" : "已銷毀", + "beforeMount" : "掛載前" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file |