diff options
Diffstat (limited to 'apps/user_ldap')
64 files changed, 304 insertions, 304 deletions
diff --git a/apps/user_ldap/l10n/ast.js b/apps/user_ldap/l10n/ast.js index 2dc1282d888..aa8b62a55cb 100644 --- a/apps/user_ldap/l10n/ast.js +++ b/apps/user_ldap/l10n/ast.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Asocedió un erru. Por favor, compruebe la configuración y el rexistru.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "El filtru de busca nun ye válidu , probablemente por cuenta de problemes de sintaxis como'l númberu impar de soportes abiertos y zarraos. Por favor revisalo.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Asocedió un erru de conexón a LDAP / AD, por favor, comprueba'l host, el puertu y les credenciales.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid nun s'atopa. Va ser trocáu col nome d'entamu de sesión cuando se consulta LDAP / AD.", "Please provide a login name to test against" : "Por favor, proporcione un nombre de inicio de sesión para comprobar en contra", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "El cuadru de grupu taba desactiváu , por mor qu'el servidor LDAP / AD nun almite memberOf .", "_%s group found_::_%s groups found_" : ["%s grupu alcontráu","%s grupos alcontraos"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "Editar consulta LDAP", "LDAP Filter:" : "Filtru LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "El filtru especifica qué grupos LDAP van tener accesu a %s.", - "Verify settings and count groups" : "Comprobar la configuración y grupos de recuentu", "When logging in, %s will find the user based on the following attributes:" : "Al empecipiar sesión, %s atópase l'usuariu en función de los siguientes atributos :", "LDAP / AD Username:" : "Nome d'usuariu LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite la entrada en contra'l nome d'usuariu LDAP / AD, yá sía uid o samaccountname y va ser detectada.", "LDAP / AD Email Address:" : "Direición e-mail LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Almite la entrada contra un atributu de corréu electrónicu. Almitirase corréu electrónicu y mailPrimaryAddress.", "Other Attributes:" : "Otros atributos:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "Comprobar los axustes", "1. Server" : "1. Sirvidor", "%s. Server:" : "%s. Sirvidor:", - "Add a new and blank configuration" : "Amestar una configuración nueva y en blancu", "Copy current configuration into new directory binding" : "Copiar configuración actual nel nuevu directoriu obligatoriu", "Delete the current configuration" : "Desaniciar la configuración actual", "Host" : "Equipu", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pues omitir el protocolu, sacantes si necesites SSL. Nesi casu, entama con ldaps://", "Port" : "Puertu", "Detect Port" : "Detectar Puertu", "User DN" : "DN usuariu", @@ -155,6 +150,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Los nomes d'usuariu usense p'atroxar (meta) datos. En cuenta d'identificar y reconocer usuarios, cada usuariu de LDAP tendrá'l so nome d'usuariu internu polo que rique un mapéu dende'l so nome d'usuariu al usuariu de LDAP. El nome d'usuariu creáu mapeáse al UUID del usuariu de LDAP. Amás cacheamos tamién la DN p'amenorgar la intecractividá de LDAP, pero ensin usala pa la identificación. Si la DN camuda, atoparanse los cambios. L'usu internu del nome d'usuariu ye perdayures. ", "Clear Username-LDAP User Mapping" : "Llimpiar l'asignación de los Nomes d'usuariu de los usuarios LDAP", "Clear Groupname-LDAP Group Mapping" : "Llimpiar l'asignación de los Nomes de grupu de los grupos de LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid nun s'atopa. Va ser trocáu col nome d'entamu de sesión cuando se consulta LDAP / AD.", + "Verify settings and count groups" : "Comprobar la configuración y grupos de recuentu", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite la entrada en contra'l nome d'usuariu LDAP / AD, yá sía uid o samaccountname y va ser detectada.", + "Add a new and blank configuration" : "Amestar una configuración nueva y en blancu", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pues omitir el protocolu, sacantes si necesites SSL. Nesi casu, entama con ldaps://", "in bytes" : "en bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/ast.json b/apps/user_ldap/l10n/ast.json index f6d642df5dd..789eb3ad167 100644 --- a/apps/user_ldap/l10n/ast.json +++ b/apps/user_ldap/l10n/ast.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Asocedió un erru. Por favor, compruebe la configuración y el rexistru.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "El filtru de busca nun ye válidu , probablemente por cuenta de problemes de sintaxis como'l númberu impar de soportes abiertos y zarraos. Por favor revisalo.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Asocedió un erru de conexón a LDAP / AD, por favor, comprueba'l host, el puertu y les credenciales.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid nun s'atopa. Va ser trocáu col nome d'entamu de sesión cuando se consulta LDAP / AD.", "Please provide a login name to test against" : "Por favor, proporcione un nombre de inicio de sesión para comprobar en contra", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "El cuadru de grupu taba desactiváu , por mor qu'el servidor LDAP / AD nun almite memberOf .", "_%s group found_::_%s groups found_" : ["%s grupu alcontráu","%s grupos alcontraos"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "Editar consulta LDAP", "LDAP Filter:" : "Filtru LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "El filtru especifica qué grupos LDAP van tener accesu a %s.", - "Verify settings and count groups" : "Comprobar la configuración y grupos de recuentu", "When logging in, %s will find the user based on the following attributes:" : "Al empecipiar sesión, %s atópase l'usuariu en función de los siguientes atributos :", "LDAP / AD Username:" : "Nome d'usuariu LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite la entrada en contra'l nome d'usuariu LDAP / AD, yá sía uid o samaccountname y va ser detectada.", "LDAP / AD Email Address:" : "Direición e-mail LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Almite la entrada contra un atributu de corréu electrónicu. Almitirase corréu electrónicu y mailPrimaryAddress.", "Other Attributes:" : "Otros atributos:", @@ -72,11 +69,9 @@ "Verify settings" : "Comprobar los axustes", "1. Server" : "1. Sirvidor", "%s. Server:" : "%s. Sirvidor:", - "Add a new and blank configuration" : "Amestar una configuración nueva y en blancu", "Copy current configuration into new directory binding" : "Copiar configuración actual nel nuevu directoriu obligatoriu", "Delete the current configuration" : "Desaniciar la configuración actual", "Host" : "Equipu", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pues omitir el protocolu, sacantes si necesites SSL. Nesi casu, entama con ldaps://", "Port" : "Puertu", "Detect Port" : "Detectar Puertu", "User DN" : "DN usuariu", @@ -153,6 +148,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Los nomes d'usuariu usense p'atroxar (meta) datos. En cuenta d'identificar y reconocer usuarios, cada usuariu de LDAP tendrá'l so nome d'usuariu internu polo que rique un mapéu dende'l so nome d'usuariu al usuariu de LDAP. El nome d'usuariu creáu mapeáse al UUID del usuariu de LDAP. Amás cacheamos tamién la DN p'amenorgar la intecractividá de LDAP, pero ensin usala pa la identificación. Si la DN camuda, atoparanse los cambios. L'usu internu del nome d'usuariu ye perdayures. ", "Clear Username-LDAP User Mapping" : "Llimpiar l'asignación de los Nomes d'usuariu de los usuarios LDAP", "Clear Groupname-LDAP Group Mapping" : "Llimpiar l'asignación de los Nomes de grupu de los grupos de LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid nun s'atopa. Va ser trocáu col nome d'entamu de sesión cuando se consulta LDAP / AD.", + "Verify settings and count groups" : "Comprobar la configuración y grupos de recuentu", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite la entrada en contra'l nome d'usuariu LDAP / AD, yá sía uid o samaccountname y va ser detectada.", + "Add a new and blank configuration" : "Amestar una configuración nueva y en blancu", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pues omitir el protocolu, sacantes si necesites SSL. Nesi casu, entama con ldaps://", "in bytes" : "en bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/cs.js b/apps/user_ldap/l10n/cs.js index 86e4cac41cb..2645072771b 100644 --- a/apps/user_ldap/l10n/cs.js +++ b/apps/user_ldap/l10n/cs.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Došlo k nespecifikované chybě. Zkontrolujte prosím nastavení a soubor logu.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filtr vyhledávání je neplatný, pravděpodobně z důvodu chybné syntax jako třeba neuzavřené závorky. Ověřte to.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Došlo k chybě připojení k LDAP / AD, zkontrolujte prosím host, port a přihlašovací údaje.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chybí zástupný znak %uid. Bude nahrazen přihlašovacím jménem při dotazování LDAP / AD.", "Please provide a login name to test against" : "Zadejte prosím přihlašovací jméno pro otestování", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Skupinové pole bylo vypnuto, protože LDAP / AD server nepodporuje memberOf.", "Password change rejected. Hint: " : "Změna hesla zamítnuta. Nápověda: ", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Upravit LDAP požadavek", "LDAP Filter:" : "LDAP filtr:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtr určuje, kteří uživatelé LDAP mají mít přístup k instanci %s.", - "Verify settings and count groups" : "Ověřit nastavení a spočítat skupiny", "When logging in, %s will find the user based on the following attributes:" : "Při přihlašování, %s bude hledat uživatele na základě následujících atributů:", "LDAP / AD Username:" : "LDAP / AD uživatelské jméno:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Umožňuje přihlášení s LDAP / AD uživatelským jménem, které má rozpoznatelnou hodnotu pro uid nebo samaccountname.", "LDAP / AD Email Address:" : "LDAP / AD emailová adresa:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Umožňuje přihlášení s atributem emailu. Jsou povoleny Mail a mailPrimaryAddress.", "Other Attributes:" : "Další atributy:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Ověřit nastavení", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Přidat novou a prázdnou konfiguraci", "Copy current configuration into new directory binding" : "Zkopírovat současnou konfiguraci do nového adresářového propojení", "Delete the current configuration" : "Smazat současnou konfiguraci", "Host" : "Počítač", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Můžete vynechat protokol, vyjma pokud požadujete SSL. Tehdy začněte s ldaps://", "Port" : "Port", "Detect Port" : "Detekovat port", "User DN" : "Uživatelské DN", @@ -163,6 +158,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Uživatelská jména jsou používána pro uchovávání a přiřazování (meta)dat. Pro správnou identifikaci a rozpoznání uživatelů bude mít každý LDAP uživatel interní uživatelské jméno. To vyžaduje mapování uživatelských jmen na uživatele LDAP. Vytvořené uživatelské jméno je mapováno na UUID uživatele v LDAP. DN informace je navíc udržována v paměti pro snížení interakce s LDAP, ale není používána pro identifikaci. Pokud se DN změní, bude to správně rozpoznáno. Interní uživatelské jméno se používá celé. Vyčištění mapování zanechá zbytky všude. Vyčištění navíc není specifické pro každou konfiguraci, bude mít vliv na všechny LDAP konfigurace! Nikdy nečistěte mapování v produkčním prostředí, ale pouze v testovací nebo experimentální fázi.", "Clear Username-LDAP User Mapping" : "Zrušit mapování uživatelských jmen LDAPu", "Clear Groupname-LDAP Group Mapping" : "Zrušit mapování názvů skupin LDAPu", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chybí zástupný znak %uid. Bude nahrazen přihlašovacím jménem při dotazování LDAP / AD.", + "Verify settings and count groups" : "Ověřit nastavení a spočítat skupiny", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Umožňuje přihlášení s LDAP / AD uživatelským jménem, které má rozpoznatelnou hodnotu pro uid nebo samaccountname.", + "Add a new and blank configuration" : "Přidat novou a prázdnou konfiguraci", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Můžete vynechat protokol, vyjma pokud požadujete SSL. Tehdy začněte s ldaps://", "in bytes" : "v bajtech" }, "nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;"); diff --git a/apps/user_ldap/l10n/cs.json b/apps/user_ldap/l10n/cs.json index 0f89a74a57a..c3b2279237a 100644 --- a/apps/user_ldap/l10n/cs.json +++ b/apps/user_ldap/l10n/cs.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Došlo k nespecifikované chybě. Zkontrolujte prosím nastavení a soubor logu.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filtr vyhledávání je neplatný, pravděpodobně z důvodu chybné syntax jako třeba neuzavřené závorky. Ověřte to.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Došlo k chybě připojení k LDAP / AD, zkontrolujte prosím host, port a přihlašovací údaje.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chybí zástupný znak %uid. Bude nahrazen přihlašovacím jménem při dotazování LDAP / AD.", "Please provide a login name to test against" : "Zadejte prosím přihlašovací jméno pro otestování", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Skupinové pole bylo vypnuto, protože LDAP / AD server nepodporuje memberOf.", "Password change rejected. Hint: " : "Změna hesla zamítnuta. Nápověda: ", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Upravit LDAP požadavek", "LDAP Filter:" : "LDAP filtr:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtr určuje, kteří uživatelé LDAP mají mít přístup k instanci %s.", - "Verify settings and count groups" : "Ověřit nastavení a spočítat skupiny", "When logging in, %s will find the user based on the following attributes:" : "Při přihlašování, %s bude hledat uživatele na základě následujících atributů:", "LDAP / AD Username:" : "LDAP / AD uživatelské jméno:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Umožňuje přihlášení s LDAP / AD uživatelským jménem, které má rozpoznatelnou hodnotu pro uid nebo samaccountname.", "LDAP / AD Email Address:" : "LDAP / AD emailová adresa:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Umožňuje přihlášení s atributem emailu. Jsou povoleny Mail a mailPrimaryAddress.", "Other Attributes:" : "Další atributy:", @@ -75,11 +72,9 @@ "Verify settings" : "Ověřit nastavení", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Přidat novou a prázdnou konfiguraci", "Copy current configuration into new directory binding" : "Zkopírovat současnou konfiguraci do nového adresářového propojení", "Delete the current configuration" : "Smazat současnou konfiguraci", "Host" : "Počítač", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Můžete vynechat protokol, vyjma pokud požadujete SSL. Tehdy začněte s ldaps://", "Port" : "Port", "Detect Port" : "Detekovat port", "User DN" : "Uživatelské DN", @@ -161,6 +156,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Uživatelská jména jsou používána pro uchovávání a přiřazování (meta)dat. Pro správnou identifikaci a rozpoznání uživatelů bude mít každý LDAP uživatel interní uživatelské jméno. To vyžaduje mapování uživatelských jmen na uživatele LDAP. Vytvořené uživatelské jméno je mapováno na UUID uživatele v LDAP. DN informace je navíc udržována v paměti pro snížení interakce s LDAP, ale není používána pro identifikaci. Pokud se DN změní, bude to správně rozpoznáno. Interní uživatelské jméno se používá celé. Vyčištění mapování zanechá zbytky všude. Vyčištění navíc není specifické pro každou konfiguraci, bude mít vliv na všechny LDAP konfigurace! Nikdy nečistěte mapování v produkčním prostředí, ale pouze v testovací nebo experimentální fázi.", "Clear Username-LDAP User Mapping" : "Zrušit mapování uživatelských jmen LDAPu", "Clear Groupname-LDAP Group Mapping" : "Zrušit mapování názvů skupin LDAPu", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chybí zástupný znak %uid. Bude nahrazen přihlašovacím jménem při dotazování LDAP / AD.", + "Verify settings and count groups" : "Ověřit nastavení a spočítat skupiny", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Umožňuje přihlášení s LDAP / AD uživatelským jménem, které má rozpoznatelnou hodnotu pro uid nebo samaccountname.", + "Add a new and blank configuration" : "Přidat novou a prázdnou konfiguraci", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Můžete vynechat protokol, vyjma pokud požadujete SSL. Tehdy začněte s ldaps://", "in bytes" : "v bajtech" },"pluralForm" :"nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/da.js b/apps/user_ldap/l10n/da.js index fc511f47483..44de84e7054 100644 --- a/apps/user_ldap/l10n/da.js +++ b/apps/user_ldap/l10n/da.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Der opstod en uspecificeret fejl. Tjek venligst indstillingerne og loggen.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Søgefilteret er ugyldigt - sandsynligvis på grund af problemer med syntaksen, såsom et ulige antal åbne og lukkede parenteser. Gennemse venligst. ", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Der opstod en forbindelsesfejl til LDAP/AD - tjek venligst vært, port og brugeroplysninger.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Pladsholderen for %uid mangler. Den vil blive erstattes med loginnavnet, når LDAP/AD forespørges.", "Please provide a login name to test against" : "Angiv venligst et loginnavn for at teste mod", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Gruppeboksen var slået fra, fordi LDAP/AD-serveren ikke understøtter memberOf.", "Password change rejected. Hint: " : "Kodeord ændring afvist. Hint:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Redigér LDAP-forespørgsel", "LDAP Filter:" : "LDAP-filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filteret angiver hvilke LDAP-grupper, der skal have adgang til instansen %s.", - "Verify settings and count groups" : "Verificér indstillinger og optællingsgrupper", "When logging in, %s will find the user based on the following attributes:" : "Når der logges ind, så vil %s finde brugeren baseret på følgende attributter:", "LDAP / AD Username:" : "LDAP/AD-brugernavn:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillader login mod LDAP/AD-brugernavnet, hvilket enten er et uid eller »samaccountname«, og vil blive detekteret.", "LDAP / AD Email Address:" : "E-mailadresser for LDAP/AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Tillader login mod en e-mailattribut. Mail og mailPrimaryAddress vil være tilladt.", "Other Attributes:" : "Andre attributter:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Kontrollér indstillinger", "1. Server" : "1. server", "%s. Server:" : "%s. server:", - "Add a new and blank configuration" : "Tilføj en ny og tom konfiguration", "Copy current configuration into new directory binding" : "Kopiér nuværende konfiguration ind i en ny mappetilknytning", "Delete the current configuration" : "Slet den aktuelle konfiguration", "Host" : "Vært", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan udelade protokollen, medmindre du skal bruge SSL. Start i så fald med ldaps://", "Port" : "Port", "Detect Port" : "Registrér port", "User DN" : "Bruger DN", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Brugernavne bruges til at lagre og tildele (meta)data. For at kunne identificere og genkende brugere præcist, så vil hver LDAP-bruger have et internt brugernavn. Det oprettede brugernavn kortlægges til UUID'et for LDAP-brugeren. I tillæg mellemlagres DN'et for at mindske LDAP-interaktioner, men det benyttes ikke til identifikation. Hvis DN'et ændres, så vil ændringerne blive registreret. Det interne brugernavn anvendes overalt. Hvis kortlægningerne ryddes, så vil der være rester overalt. Rydning af kortlægningerne er ikke konfigurationssensitivt - det påvirker alle LDAP-konfigurationer! Ryd aldrig kortlægningerne i et produktionsmiljø, kun i et teststadie eller eksperimentelt stadie.", "Clear Username-LDAP User Mapping" : "Ryd kortlægning mellem brugernavn og LDAP-bruger", "Clear Groupname-LDAP Group Mapping" : "Ryd kortlægning mellem gruppenavn og LDAP-gruppe", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Pladsholderen for %uid mangler. Den vil blive erstattes med loginnavnet, når LDAP/AD forespørges.", + "Verify settings and count groups" : "Verificér indstillinger og optællingsgrupper", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillader login mod LDAP/AD-brugernavnet, hvilket enten er et uid eller »samaccountname«, og vil blive detekteret.", + "Add a new and blank configuration" : "Tilføj en ny og tom konfiguration", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan udelade protokollen, medmindre du skal bruge SSL. Start i så fald med ldaps://", "in bytes" : "i bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/da.json b/apps/user_ldap/l10n/da.json index 20fe9b3a06e..85e2f656897 100644 --- a/apps/user_ldap/l10n/da.json +++ b/apps/user_ldap/l10n/da.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Der opstod en uspecificeret fejl. Tjek venligst indstillingerne og loggen.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Søgefilteret er ugyldigt - sandsynligvis på grund af problemer med syntaksen, såsom et ulige antal åbne og lukkede parenteser. Gennemse venligst. ", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Der opstod en forbindelsesfejl til LDAP/AD - tjek venligst vært, port og brugeroplysninger.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Pladsholderen for %uid mangler. Den vil blive erstattes med loginnavnet, når LDAP/AD forespørges.", "Please provide a login name to test against" : "Angiv venligst et loginnavn for at teste mod", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Gruppeboksen var slået fra, fordi LDAP/AD-serveren ikke understøtter memberOf.", "Password change rejected. Hint: " : "Kodeord ændring afvist. Hint:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Redigér LDAP-forespørgsel", "LDAP Filter:" : "LDAP-filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filteret angiver hvilke LDAP-grupper, der skal have adgang til instansen %s.", - "Verify settings and count groups" : "Verificér indstillinger og optællingsgrupper", "When logging in, %s will find the user based on the following attributes:" : "Når der logges ind, så vil %s finde brugeren baseret på følgende attributter:", "LDAP / AD Username:" : "LDAP/AD-brugernavn:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillader login mod LDAP/AD-brugernavnet, hvilket enten er et uid eller »samaccountname«, og vil blive detekteret.", "LDAP / AD Email Address:" : "E-mailadresser for LDAP/AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Tillader login mod en e-mailattribut. Mail og mailPrimaryAddress vil være tilladt.", "Other Attributes:" : "Andre attributter:", @@ -75,11 +72,9 @@ "Verify settings" : "Kontrollér indstillinger", "1. Server" : "1. server", "%s. Server:" : "%s. server:", - "Add a new and blank configuration" : "Tilføj en ny og tom konfiguration", "Copy current configuration into new directory binding" : "Kopiér nuværende konfiguration ind i en ny mappetilknytning", "Delete the current configuration" : "Slet den aktuelle konfiguration", "Host" : "Vært", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan udelade protokollen, medmindre du skal bruge SSL. Start i så fald med ldaps://", "Port" : "Port", "Detect Port" : "Registrér port", "User DN" : "Bruger DN", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Brugernavne bruges til at lagre og tildele (meta)data. For at kunne identificere og genkende brugere præcist, så vil hver LDAP-bruger have et internt brugernavn. Det oprettede brugernavn kortlægges til UUID'et for LDAP-brugeren. I tillæg mellemlagres DN'et for at mindske LDAP-interaktioner, men det benyttes ikke til identifikation. Hvis DN'et ændres, så vil ændringerne blive registreret. Det interne brugernavn anvendes overalt. Hvis kortlægningerne ryddes, så vil der være rester overalt. Rydning af kortlægningerne er ikke konfigurationssensitivt - det påvirker alle LDAP-konfigurationer! Ryd aldrig kortlægningerne i et produktionsmiljø, kun i et teststadie eller eksperimentelt stadie.", "Clear Username-LDAP User Mapping" : "Ryd kortlægning mellem brugernavn og LDAP-bruger", "Clear Groupname-LDAP Group Mapping" : "Ryd kortlægning mellem gruppenavn og LDAP-gruppe", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Pladsholderen for %uid mangler. Den vil blive erstattes med loginnavnet, når LDAP/AD forespørges.", + "Verify settings and count groups" : "Verificér indstillinger og optællingsgrupper", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillader login mod LDAP/AD-brugernavnet, hvilket enten er et uid eller »samaccountname«, og vil blive detekteret.", + "Add a new and blank configuration" : "Tilføj en ny og tom konfiguration", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan udelade protokollen, medmindre du skal bruge SSL. Start i så fald med ldaps://", "in bytes" : "i bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/de.js b/apps/user_ldap/l10n/de.js index 015995d1b80..0c825e34df6 100644 --- a/apps/user_ldap/l10n/de.js +++ b/apps/user_ldap/l10n/de.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Ein nicht näher spezifizierter Fehler ist aufgetreten. Bitte prüfe die Einstellungen und die Logdatei.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Der Suchfilter ist ungültig, möglicherweise bestehen Eingabefehler wie z.B. eine ungerade Anzahl von geöffneten und geschlossenen Klammern. Bitte überarbeiten.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Es ist ein Verbindungsfehler zum LDAP/AD aufgetreten, bitte Host, Port und Anmeldeinformationen überprüfen.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", "Please provide a login name to test against" : "Bitte gib einen Benutzernamen an, um gegen diesen zu testen", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Das Gruppenfeld wurde deaktiviert, da der LDAP / AD-Server memberOf nicht unterstützt.", "Password change rejected. Hint: " : "Passwortändertung verweigert. Hinweis:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "LDAP-Abfrage bearbeiten", "LDAP Filter:" : "LDAP-Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Der Filter bestimmt, welche LDAP-Gruppen Zugriff auf die %s-Instanz haben sollen.", - "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Erlaubt das Anmelden gegen ein E-Mail Attribut. Mail und mailPrimaryAddress sind erlaubt.", "Other Attributes:" : "Andere Attribute:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", "Copy current configuration into new directory binding" : "Aktuelle Konfiguration in eine neues Verzeichnis-Bind kopieren", "Delete the current configuration" : "Aktuelle Konfiguration löschen", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kannst das Protokoll auslassen, außer wenn du SSL benötigst. Starte mit ldaps://", "Port" : "Port", "Detect Port" : "Port ermitteln", "User DN" : "Benutzer-DN", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Die Benutzernamen werden genutzt, um (Meta-)Daten zuzuordnen und zu speichern. Um Benutzer eindeutig und präzise zu identifizieren, hat jeder LDAP-Benutzer einen internen Benutzernamen. Dies erfordert eine Zuordnung (mappen) von Benutzernamen zum LDAP-Benutzer. Der erstellte Benutzername wird der UUID des LDAP-Benutzernamens zugeordnet. Zusätzlich wird der DN zwischengespeichert, um die Interaktion mit dem LDAP zu minimieren, was aber nicht der Identifikation dient. Ändert sich der DN, werden die Änderungen durch gefunden. Der interne Benutzername, wird in überall verwendet. Werden die Zuordnungen gelöscht, bleiben überall Reste zurück. Die Löschung der Zuordnungen kann nicht in der Konfiguration vorgenommen werden, beeinflusst aber die LDAP-Konfiguration! Löschen Sie niemals die Zuordnungen in einer produktiven Umgebung. Lösche die Zuordnungen nur in einer Test- oder Experimentierumgebung.", "Clear Username-LDAP User Mapping" : "LDAP-Benutzernamenzuordnung löschen", "Clear Groupname-LDAP Group Mapping" : "LDAP-Gruppennamenzuordnung löschen", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", + "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", + "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kannst das Protokoll auslassen, außer wenn du SSL benötigst. Starte mit ldaps://", "in bytes" : "in Bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/de.json b/apps/user_ldap/l10n/de.json index 6c6b27e3508..56fa342e821 100644 --- a/apps/user_ldap/l10n/de.json +++ b/apps/user_ldap/l10n/de.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Ein nicht näher spezifizierter Fehler ist aufgetreten. Bitte prüfe die Einstellungen und die Logdatei.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Der Suchfilter ist ungültig, möglicherweise bestehen Eingabefehler wie z.B. eine ungerade Anzahl von geöffneten und geschlossenen Klammern. Bitte überarbeiten.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Es ist ein Verbindungsfehler zum LDAP/AD aufgetreten, bitte Host, Port und Anmeldeinformationen überprüfen.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", "Please provide a login name to test against" : "Bitte gib einen Benutzernamen an, um gegen diesen zu testen", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Das Gruppenfeld wurde deaktiviert, da der LDAP / AD-Server memberOf nicht unterstützt.", "Password change rejected. Hint: " : "Passwortändertung verweigert. Hinweis:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "LDAP-Abfrage bearbeiten", "LDAP Filter:" : "LDAP-Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Der Filter bestimmt, welche LDAP-Gruppen Zugriff auf die %s-Instanz haben sollen.", - "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Erlaubt das Anmelden gegen ein E-Mail Attribut. Mail und mailPrimaryAddress sind erlaubt.", "Other Attributes:" : "Andere Attribute:", @@ -75,11 +72,9 @@ "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", "Copy current configuration into new directory binding" : "Aktuelle Konfiguration in eine neues Verzeichnis-Bind kopieren", "Delete the current configuration" : "Aktuelle Konfiguration löschen", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kannst das Protokoll auslassen, außer wenn du SSL benötigst. Starte mit ldaps://", "Port" : "Port", "Detect Port" : "Port ermitteln", "User DN" : "Benutzer-DN", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Die Benutzernamen werden genutzt, um (Meta-)Daten zuzuordnen und zu speichern. Um Benutzer eindeutig und präzise zu identifizieren, hat jeder LDAP-Benutzer einen internen Benutzernamen. Dies erfordert eine Zuordnung (mappen) von Benutzernamen zum LDAP-Benutzer. Der erstellte Benutzername wird der UUID des LDAP-Benutzernamens zugeordnet. Zusätzlich wird der DN zwischengespeichert, um die Interaktion mit dem LDAP zu minimieren, was aber nicht der Identifikation dient. Ändert sich der DN, werden die Änderungen durch gefunden. Der interne Benutzername, wird in überall verwendet. Werden die Zuordnungen gelöscht, bleiben überall Reste zurück. Die Löschung der Zuordnungen kann nicht in der Konfiguration vorgenommen werden, beeinflusst aber die LDAP-Konfiguration! Löschen Sie niemals die Zuordnungen in einer produktiven Umgebung. Lösche die Zuordnungen nur in einer Test- oder Experimentierumgebung.", "Clear Username-LDAP User Mapping" : "LDAP-Benutzernamenzuordnung löschen", "Clear Groupname-LDAP Group Mapping" : "LDAP-Gruppennamenzuordnung löschen", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", + "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", + "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kannst das Protokoll auslassen, außer wenn du SSL benötigst. Starte mit ldaps://", "in bytes" : "in Bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/de_DE.js b/apps/user_ldap/l10n/de_DE.js index aeb1a3b1ae1..1d2be037a1a 100644 --- a/apps/user_ldap/l10n/de_DE.js +++ b/apps/user_ldap/l10n/de_DE.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Ein nicht näher spezifizierter Fehler ist aufgetreten. Bitte überprüfe die Einstellungen und die Logdatei.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Der Suchfilter ist ungültig, möglicherweise bestehen Eingabefehler wie z.B. eine ungerade Anzahl von geöffneten und geschlossenen Klammern. Bitte überarbeiten.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Es ist ein Verbindungsfehler zum LDAP/AD aufgetreten, bitte überprüfen Sie Host, Port und Anmeldeinformationen.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", "Please provide a login name to test against" : "Bitte geben Sie einen Benutzernamen an, um gegen diesen zu testen", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Das Gruppenfeld wurde deaktiviert, da der LDAP / AD-Server memberOf nicht unterstützt.", "Password change rejected. Hint: " : "Passwortändertung verweigert. Hinweis:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "LDAP-Abfrage bearbeiten", "LDAP Filter:" : "LDAP-Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Der Filter bestimmt, welche LDAP-Gruppen Zugriff auf die %s-Instanz haben sollen.", - "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Erlaubt das Anmelden gegen ein E-Mail Attribut. Mail und mailPrimaryAddress sind erlaubt.", "Other Attributes:" : "Andere Attribute:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", "Copy current configuration into new directory binding" : "Aktuelle Konfiguration in eine neues Verzeichnis-Bind kopieren ", "Delete the current configuration" : "Aktuelle Konfiguration löschen", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Sie können das Protokoll auslassen, außer wenn Sie SSL benötigen. Beginnen Sie dann mit ldaps://", "Port" : "Port", "Detect Port" : "Port ermitteln", "User DN" : "Benutzer-DN", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Benutzernamen dienen zum Speichern und Zuweisen von (Meta-)Daten. Um Benutzer eindeutig zu identifizieren und zu erkennen, besitzt jeder LDAP-Benutzer einen internen Benutzernamen. Dies erfordert eine Zuordnung des jeweiligen Benutzernamens zum LDAP-Benutzer. Der erstellte Benutzername wird der UUID des LDAP-Benutzers zugeordnet. Darüber hinaus wird der DN auch zwischengespeichert, um die Interaktion über LDAP zu reduzieren, was aber nicht zur Identifikation dient. Ändert sich der DN, werden die Änderungen gefunden. Der interne Benutzername wird durchgängig verwendet. Ein Löschen der Zuordnungen führt zum systemweiten Verbleib von Restdaten. Es bleibt nicht auf eine einzelne Konfiguration beschränkt, sondern wirkt sich auf alle LDAP-Konfigurationen aus! Löschen Sie die Zuordnungen nie innerhalb einer Produktivumgebung, sondern nur in einer Test- oder Experimentierumgebung.", "Clear Username-LDAP User Mapping" : "Lösche LDAP-Benutzernamenzuordnung", "Clear Groupname-LDAP Group Mapping" : "Lösche LDAP-Gruppennamenzuordnung", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", + "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", + "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Sie können das Protokoll auslassen, außer wenn Sie SSL benötigen. Beginnen Sie dann mit ldaps://", "in bytes" : "in Bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/de_DE.json b/apps/user_ldap/l10n/de_DE.json index 419bd732398..3ad34c02cf2 100644 --- a/apps/user_ldap/l10n/de_DE.json +++ b/apps/user_ldap/l10n/de_DE.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Ein nicht näher spezifizierter Fehler ist aufgetreten. Bitte überprüfe die Einstellungen und die Logdatei.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Der Suchfilter ist ungültig, möglicherweise bestehen Eingabefehler wie z.B. eine ungerade Anzahl von geöffneten und geschlossenen Klammern. Bitte überarbeiten.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Es ist ein Verbindungsfehler zum LDAP/AD aufgetreten, bitte überprüfen Sie Host, Port und Anmeldeinformationen.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", "Please provide a login name to test against" : "Bitte geben Sie einen Benutzernamen an, um gegen diesen zu testen", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Das Gruppenfeld wurde deaktiviert, da der LDAP / AD-Server memberOf nicht unterstützt.", "Password change rejected. Hint: " : "Passwortändertung verweigert. Hinweis:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "LDAP-Abfrage bearbeiten", "LDAP Filter:" : "LDAP-Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Der Filter bestimmt, welche LDAP-Gruppen Zugriff auf die %s-Instanz haben sollen.", - "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Erlaubt das Anmelden gegen ein E-Mail Attribut. Mail und mailPrimaryAddress sind erlaubt.", "Other Attributes:" : "Andere Attribute:", @@ -75,11 +72,9 @@ "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", "Copy current configuration into new directory binding" : "Aktuelle Konfiguration in eine neues Verzeichnis-Bind kopieren ", "Delete the current configuration" : "Aktuelle Konfiguration löschen", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Sie können das Protokoll auslassen, außer wenn Sie SSL benötigen. Beginnen Sie dann mit ldaps://", "Port" : "Port", "Detect Port" : "Port ermitteln", "User DN" : "Benutzer-DN", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Benutzernamen dienen zum Speichern und Zuweisen von (Meta-)Daten. Um Benutzer eindeutig zu identifizieren und zu erkennen, besitzt jeder LDAP-Benutzer einen internen Benutzernamen. Dies erfordert eine Zuordnung des jeweiligen Benutzernamens zum LDAP-Benutzer. Der erstellte Benutzername wird der UUID des LDAP-Benutzers zugeordnet. Darüber hinaus wird der DN auch zwischengespeichert, um die Interaktion über LDAP zu reduzieren, was aber nicht zur Identifikation dient. Ändert sich der DN, werden die Änderungen gefunden. Der interne Benutzername wird durchgängig verwendet. Ein Löschen der Zuordnungen führt zum systemweiten Verbleib von Restdaten. Es bleibt nicht auf eine einzelne Konfiguration beschränkt, sondern wirkt sich auf alle LDAP-Konfigurationen aus! Löschen Sie die Zuordnungen nie innerhalb einer Produktivumgebung, sondern nur in einer Test- oder Experimentierumgebung.", "Clear Username-LDAP User Mapping" : "Lösche LDAP-Benutzernamenzuordnung", "Clear Groupname-LDAP Group Mapping" : "Lösche LDAP-Gruppennamenzuordnung", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Der %uid - Platzhalter fehlt. Dieser wird mit dem Anmeldenamen beim Abfragen von LDAP / AD ersetzt.", + "Verify settings and count groups" : "Einstellungen überprüfen und Gruppen zählen", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Erlaubt das Anmelden gegen den LDAP / AD Nutzernamen, welcher entweder eine UID oder samaccountname ist und automatisch erkannt wird.", + "Add a new and blank configuration" : "Eine neue und leere Konfiguration hinzufügen", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Sie können das Protokoll auslassen, außer wenn Sie SSL benötigen. Beginnen Sie dann mit ldaps://", "in bytes" : "in Bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/el.js b/apps/user_ldap/l10n/el.js index 0c5dbde6c00..17b52f69eb6 100644 --- a/apps/user_ldap/l10n/el.js +++ b/apps/user_ldap/l10n/el.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Προέκυψε ένα απροσδιόριστο σφάλμα. Παρακαλούμε ελέγξτε τις ρυθμίσεςι και το αρχείο ακταγραφής.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Το φίλτρο αναζήτησης δεν είναι έγκυρο, πιθανώς λόγω συντακτικών προβλημάτων όπως μη ταίριασμα ανοίγματος και κλεισίματος αγκυλών. Παρακαλούμε διορθώστε.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Προέκυψε σφάλμα σύνδεσης στο LDAP / AD, παρακαλούμε ελέγξτε διακομιστή θύρα και διαπιστευτήρια.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Η κράτηση θέσης %uid απουσιάζει. Θα αντικατασταθεί με το όνομα σύνδεσης κατά το ερώτημα ", "Please provide a login name to test against" : "Παρακαλούμε δώστε ένα όνομα σύνδεσης για να γίνει δοκιμή", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Το πεδίο ομάδας απενεργοποιήθηκε επειδή ο διακομιστής LDAP / AD δεν υποστηρίζει το memberOf.", "_%s group found_::_%s groups found_" : ["%s ομάδα βρέθηκε","%s ομάδες βρέθηκαν"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "Επεξεργασία ερωτήματος ", "LDAP Filter:" : "Φίλτρο LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Το φίλτρο καθορίζει ποιες ομάδες LDAP θα έχουν πρόσβαση στην εγκατάσταση %s.", - "Verify settings and count groups" : "Επιβεβαίωση ρυθμίσεων και καταμέτρηση ομάδων", "When logging in, %s will find the user based on the following attributes:" : "Κατά τη σύνδεση, το %s θα βρει το χρήστη βασιζόμενος στις ακόλουθες ιδιότητες:", "LDAP / AD Username:" : "Όνομα χρήστη LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Επιτρέπει σύνδεση με το όνομα χρήστη στο LDAP / AD, το οποίο είναι είτε uid ή samaccountname και θα ανιχνευθεί.", "LDAP / AD Email Address:" : "Διεύθυνση ηλ. ταχυδρομείου LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Επιτρέπει με χρήση μια ιδιότητας email. Τα mail και mailPrimaryAddress θα επιτραπούν.", "Other Attributes:" : "Άλλες Ιδιότητες:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "Επιβεβαίωση ρυθμίσεων", "1. Server" : "1. Διακομιστής", "%s. Server:" : "%s. Διακομιστής:", - "Add a new and blank configuration" : "Προσθέτει μια νέα και κενή διαμόρφωση", "Copy current configuration into new directory binding" : "Αντιγραφή της τρέχουσας διαμόρφωσης σε νέο κατάλογο", "Delete the current configuration" : "Διαγραφή τρέχουσας διαμόρφωσης", "Host" : "Διακομιστής", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Μπορείτε να παραλείψετε το πρωτόκολλο, εκτός αν απαιτείται SSL. Σε αυτή την περίπτωση ξεκινήστε με ldaps://", "Port" : "Θύρα", "Detect Port" : "Ανίχνευση Θύρας", "User DN" : "User DN", @@ -151,6 +146,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Τα ονόματα χρηστών χρησιμοποιούνται για την αποθήκευση και τον προσδιορισμό των (μετα) δεδομένων. Προκειμένου να προσδιοριστούν με ακρίβεια και να αναγνωριστούν οι χρήστες, κάθε χρήστης LDAP θα έχει ένα εσωτερικό όνομα. Αυτό απαιτεί μια αντιστοίχιση του ονόματος χρήστη με το χρήστη LDAP. Το όνομα χρήστη που δημιουργήθηκαν αντιστοιχίζεται στην UUID του χρήστη LDAP. Επιπροσθέτως, το DN αποθηκεύεται προσωρινά (cache) ώστε να μειωθεί η αλληλεπίδραση LDAP, αλλά δεν χρησιμοποιείται για την ταυτοποίηση. Αν το DN αλλάξει, οι αλλαγές θα εντοπιστούν. Το εσωτερικό όνομα χρήστη χρησιμοποιείται παντού. Η εκκαθάριση των αντιστοιχίσεων θα αφήσει υπολείμματα παντού. Η εκκαθάριση των αντιστοιχίσεων δεν επηρεάζεται από τη διαμόρφωση, επηρεάζει όλες τις διαμορφώσεις LDAP! Μην διαγράψετε ποτέ τις αντιστοιχίσεις σε ένα λειτουργικό περιβάλλον παρά μόνο σε δοκιμές ή σε πειραματικό στάδιο.", "Clear Username-LDAP User Mapping" : "Διαγραφή αντιστοίχησης Ονόματος Χρήστη LDAP-Χρήστη", "Clear Groupname-LDAP Group Mapping" : "Διαγραφή αντιστοίχησης Ονόματος Ομάδας-LDAP Ομάδας", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Η κράτηση θέσης %uid απουσιάζει. Θα αντικατασταθεί με το όνομα σύνδεσης κατά το ερώτημα ", + "Verify settings and count groups" : "Επιβεβαίωση ρυθμίσεων και καταμέτρηση ομάδων", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Επιτρέπει σύνδεση με το όνομα χρήστη στο LDAP / AD, το οποίο είναι είτε uid ή samaccountname και θα ανιχνευθεί.", + "Add a new and blank configuration" : "Προσθέτει μια νέα και κενή διαμόρφωση", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Μπορείτε να παραλείψετε το πρωτόκολλο, εκτός αν απαιτείται SSL. Σε αυτή την περίπτωση ξεκινήστε με ldaps://", "in bytes" : "σε bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/el.json b/apps/user_ldap/l10n/el.json index 3bec2e10d62..6a4544be892 100644 --- a/apps/user_ldap/l10n/el.json +++ b/apps/user_ldap/l10n/el.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Προέκυψε ένα απροσδιόριστο σφάλμα. Παρακαλούμε ελέγξτε τις ρυθμίσεςι και το αρχείο ακταγραφής.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Το φίλτρο αναζήτησης δεν είναι έγκυρο, πιθανώς λόγω συντακτικών προβλημάτων όπως μη ταίριασμα ανοίγματος και κλεισίματος αγκυλών. Παρακαλούμε διορθώστε.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Προέκυψε σφάλμα σύνδεσης στο LDAP / AD, παρακαλούμε ελέγξτε διακομιστή θύρα και διαπιστευτήρια.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Η κράτηση θέσης %uid απουσιάζει. Θα αντικατασταθεί με το όνομα σύνδεσης κατά το ερώτημα ", "Please provide a login name to test against" : "Παρακαλούμε δώστε ένα όνομα σύνδεσης για να γίνει δοκιμή", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Το πεδίο ομάδας απενεργοποιήθηκε επειδή ο διακομιστής LDAP / AD δεν υποστηρίζει το memberOf.", "_%s group found_::_%s groups found_" : ["%s ομάδα βρέθηκε","%s ομάδες βρέθηκαν"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "Επεξεργασία ερωτήματος ", "LDAP Filter:" : "Φίλτρο LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Το φίλτρο καθορίζει ποιες ομάδες LDAP θα έχουν πρόσβαση στην εγκατάσταση %s.", - "Verify settings and count groups" : "Επιβεβαίωση ρυθμίσεων και καταμέτρηση ομάδων", "When logging in, %s will find the user based on the following attributes:" : "Κατά τη σύνδεση, το %s θα βρει το χρήστη βασιζόμενος στις ακόλουθες ιδιότητες:", "LDAP / AD Username:" : "Όνομα χρήστη LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Επιτρέπει σύνδεση με το όνομα χρήστη στο LDAP / AD, το οποίο είναι είτε uid ή samaccountname και θα ανιχνευθεί.", "LDAP / AD Email Address:" : "Διεύθυνση ηλ. ταχυδρομείου LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Επιτρέπει με χρήση μια ιδιότητας email. Τα mail και mailPrimaryAddress θα επιτραπούν.", "Other Attributes:" : "Άλλες Ιδιότητες:", @@ -72,11 +69,9 @@ "Verify settings" : "Επιβεβαίωση ρυθμίσεων", "1. Server" : "1. Διακομιστής", "%s. Server:" : "%s. Διακομιστής:", - "Add a new and blank configuration" : "Προσθέτει μια νέα και κενή διαμόρφωση", "Copy current configuration into new directory binding" : "Αντιγραφή της τρέχουσας διαμόρφωσης σε νέο κατάλογο", "Delete the current configuration" : "Διαγραφή τρέχουσας διαμόρφωσης", "Host" : "Διακομιστής", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Μπορείτε να παραλείψετε το πρωτόκολλο, εκτός αν απαιτείται SSL. Σε αυτή την περίπτωση ξεκινήστε με ldaps://", "Port" : "Θύρα", "Detect Port" : "Ανίχνευση Θύρας", "User DN" : "User DN", @@ -149,6 +144,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Τα ονόματα χρηστών χρησιμοποιούνται για την αποθήκευση και τον προσδιορισμό των (μετα) δεδομένων. Προκειμένου να προσδιοριστούν με ακρίβεια και να αναγνωριστούν οι χρήστες, κάθε χρήστης LDAP θα έχει ένα εσωτερικό όνομα. Αυτό απαιτεί μια αντιστοίχιση του ονόματος χρήστη με το χρήστη LDAP. Το όνομα χρήστη που δημιουργήθηκαν αντιστοιχίζεται στην UUID του χρήστη LDAP. Επιπροσθέτως, το DN αποθηκεύεται προσωρινά (cache) ώστε να μειωθεί η αλληλεπίδραση LDAP, αλλά δεν χρησιμοποιείται για την ταυτοποίηση. Αν το DN αλλάξει, οι αλλαγές θα εντοπιστούν. Το εσωτερικό όνομα χρήστη χρησιμοποιείται παντού. Η εκκαθάριση των αντιστοιχίσεων θα αφήσει υπολείμματα παντού. Η εκκαθάριση των αντιστοιχίσεων δεν επηρεάζεται από τη διαμόρφωση, επηρεάζει όλες τις διαμορφώσεις LDAP! Μην διαγράψετε ποτέ τις αντιστοιχίσεις σε ένα λειτουργικό περιβάλλον παρά μόνο σε δοκιμές ή σε πειραματικό στάδιο.", "Clear Username-LDAP User Mapping" : "Διαγραφή αντιστοίχησης Ονόματος Χρήστη LDAP-Χρήστη", "Clear Groupname-LDAP Group Mapping" : "Διαγραφή αντιστοίχησης Ονόματος Ομάδας-LDAP Ομάδας", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Η κράτηση θέσης %uid απουσιάζει. Θα αντικατασταθεί με το όνομα σύνδεσης κατά το ερώτημα ", + "Verify settings and count groups" : "Επιβεβαίωση ρυθμίσεων και καταμέτρηση ομάδων", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Επιτρέπει σύνδεση με το όνομα χρήστη στο LDAP / AD, το οποίο είναι είτε uid ή samaccountname και θα ανιχνευθεί.", + "Add a new and blank configuration" : "Προσθέτει μια νέα και κενή διαμόρφωση", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Μπορείτε να παραλείψετε το πρωτόκολλο, εκτός αν απαιτείται SSL. Σε αυτή την περίπτωση ξεκινήστε με ldaps://", "in bytes" : "σε bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/en_GB.js b/apps/user_ldap/l10n/en_GB.js index f0e10bea3ec..43475532412 100644 --- a/apps/user_ldap/l10n/en_GB.js +++ b/apps/user_ldap/l10n/en_GB.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "An unspecified error occurred. Please check the settings and the log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "The search filter is invalid, probably due to syntax issues like an uneven number of opened and closed brackets. Please revise.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "A connection error to LDAP / AD occurred, please check host, port and credentials.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD.", "Please provide a login name to test against" : "Please provide a login name to test against", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "The group box was disabled, because the LDAP / AD server does not support memberOf.", "_%s group found_::_%s groups found_" : ["%s group found","%s groups found"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "Edit LDAP Query", "LDAP Filter:" : "LDAP Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "The filter specifies which LDAP groups shall have access to the %s instance.", - "Verify settings and count groups" : "Verify settings and count groups", "When logging in, %s will find the user based on the following attributes:" : "When logging in, %s will find the user based on the following attributes:", "LDAP / AD Username:" : "LDAP / AD Username:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected.", "LDAP / AD Email Address:" : "LDAP / AD Email Address:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed.", "Other Attributes:" : "Other Attributes:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "Verify settings", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Add a new and blank configuration", "Copy current configuration into new directory binding" : "Copy current configuration into new directory binding", "Delete the current configuration" : "Delete the current configuration", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "You can omit the protocol, except you require SSL. Then start with ldaps://", "Port" : "Port", "Detect Port" : "Detect Port", "User DN" : "User DN", @@ -156,6 +151,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Usernames are used to store and assign (meta) data. In order to precisely identify and recognise users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage.", "Clear Username-LDAP User Mapping" : "Clear Username-LDAP User Mapping", "Clear Groupname-LDAP Group Mapping" : "Clear Groupname-LDAP Group Mapping", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD.", + "Verify settings and count groups" : "Verify settings and count groups", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected.", + "Add a new and blank configuration" : "Add a new and blank configuration", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "You can omit the protocol, except you require SSL. Then start with ldaps://", "in bytes" : "in bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/en_GB.json b/apps/user_ldap/l10n/en_GB.json index 3fec813f429..85328b1fff8 100644 --- a/apps/user_ldap/l10n/en_GB.json +++ b/apps/user_ldap/l10n/en_GB.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "An unspecified error occurred. Please check the settings and the log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "The search filter is invalid, probably due to syntax issues like an uneven number of opened and closed brackets. Please revise.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "A connection error to LDAP / AD occurred, please check host, port and credentials.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD.", "Please provide a login name to test against" : "Please provide a login name to test against", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "The group box was disabled, because the LDAP / AD server does not support memberOf.", "_%s group found_::_%s groups found_" : ["%s group found","%s groups found"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "Edit LDAP Query", "LDAP Filter:" : "LDAP Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "The filter specifies which LDAP groups shall have access to the %s instance.", - "Verify settings and count groups" : "Verify settings and count groups", "When logging in, %s will find the user based on the following attributes:" : "When logging in, %s will find the user based on the following attributes:", "LDAP / AD Username:" : "LDAP / AD Username:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected.", "LDAP / AD Email Address:" : "LDAP / AD Email Address:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed.", "Other Attributes:" : "Other Attributes:", @@ -72,11 +69,9 @@ "Verify settings" : "Verify settings", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Add a new and blank configuration", "Copy current configuration into new directory binding" : "Copy current configuration into new directory binding", "Delete the current configuration" : "Delete the current configuration", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "You can omit the protocol, except you require SSL. Then start with ldaps://", "Port" : "Port", "Detect Port" : "Detect Port", "User DN" : "User DN", @@ -154,6 +149,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Usernames are used to store and assign (meta) data. In order to precisely identify and recognise users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage.", "Clear Username-LDAP User Mapping" : "Clear Username-LDAP User Mapping", "Clear Groupname-LDAP Group Mapping" : "Clear Groupname-LDAP Group Mapping", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD.", + "Verify settings and count groups" : "Verify settings and count groups", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected.", + "Add a new and blank configuration" : "Add a new and blank configuration", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "You can omit the protocol, except you require SSL. Then start with ldaps://", "in bytes" : "in bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/es.js b/apps/user_ldap/l10n/es.js index 0f10b51c095..b19ae8920f9 100644 --- a/apps/user_ldap/l10n/es.js +++ b/apps/user_ldap/l10n/es.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Un error no especificado ocurrió. Por favor verifique las configuraciones y el registro.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "El filtro de búsqueda es inválido, probablemente debido a problemas de sintáxis tales como números impares de paréntesis abiertos y cerrados. Por favor revíselos.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Un error de conexión a LDAP / AD ocurrió, por favor verifique host, puerto y credenciales.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid no está presente. Será reemplazado con el nombre de inicio de sesión cuando se consulte LDAP / AD.", "Please provide a login name to test against" : "Por favor suministre un nombre de inicio de sesión para probar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "El cuadro de grupo fue deshabilitado, porque el servidor LDAP / AD no admite memberOf.", "Password change rejected. Hint: " : "Contraseña rechazada. Pista:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Editar consulta LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "El filtro especifica que grupos LDAP tendrán acceso a %s.", - "Verify settings and count groups" : "Verificar configuraciones y contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Cuando se inicia sesión, %s encontrará al usuario basado en los siguientes atributos:", "LDAP / AD Username:" : "Nombre de usuario LDAP /AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite el inicio de sesión contra el nombre de usuario LDAP / AD, el cual es o el uid o samaccountname y será detectado.", "LDAP / AD Email Address:" : "LDAP / AD dirección de correo electrónico:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite el inicio de sesión contra un atributo de correo electrónico. Correo y dirección primario de correo electrónico está habilitada.", "Other Attributes:" : "Otros atributos:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Verificar configuración", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", "Copy current configuration into new directory binding" : "Copiar la actual configuración en un nuevo directorio de enlace", "Delete the current configuration" : "Elimina la actual configuración", "Host" : "Servidor", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "Port" : "Puerto", "Detect Port" : "Detectar puerto", "User DN" : "DN usuario", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Los usuarios son usados para almacenar y asignar (meta) datos. Con el fin de identificar de forma precisa y reconocer usuarios, cada usuario de LDAP tendrá un nombre de usuario interno. Esto requiere un mapeo entre el nombre de usuario y el usuario del LDAP. El nombre de usuario creado es mapeado respecto al UUID del usuario en el LDAP. De forma adicional, el DN es cacheado para reducir la interacción entre el LDAP, pero no es usado para identificar. Si el DN cambia, los cambios serán aplicados. El nombre de usuario interno es usado por encima de todo. Limpiar los mapeos dejará restos por todas partes, no es sensible a configuración, ¡afecta a todas las configuraciones del LDAP! Nunca limpies los mapeos en un entorno de producción, únicamente en una fase de desarrollo o experimental.", "Clear Username-LDAP User Mapping" : "Borrar la asignación de los Nombres de usuario de los usuarios LDAP", "Clear Groupname-LDAP Group Mapping" : "Borrar la asignación de los Nombres de grupo de los grupos de LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid no está presente. Será reemplazado con el nombre de inicio de sesión cuando se consulte LDAP / AD.", + "Verify settings and count groups" : "Verificar configuraciones y contar grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite el inicio de sesión contra el nombre de usuario LDAP / AD, el cual es o el uid o samaccountname y será detectado.", + "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "in bytes" : "en bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/es.json b/apps/user_ldap/l10n/es.json index fe26e0cc73e..f280cbba9ac 100644 --- a/apps/user_ldap/l10n/es.json +++ b/apps/user_ldap/l10n/es.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Un error no especificado ocurrió. Por favor verifique las configuraciones y el registro.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "El filtro de búsqueda es inválido, probablemente debido a problemas de sintáxis tales como números impares de paréntesis abiertos y cerrados. Por favor revíselos.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Un error de conexión a LDAP / AD ocurrió, por favor verifique host, puerto y credenciales.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid no está presente. Será reemplazado con el nombre de inicio de sesión cuando se consulte LDAP / AD.", "Please provide a login name to test against" : "Por favor suministre un nombre de inicio de sesión para probar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "El cuadro de grupo fue deshabilitado, porque el servidor LDAP / AD no admite memberOf.", "Password change rejected. Hint: " : "Contraseña rechazada. Pista:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Editar consulta LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "El filtro especifica que grupos LDAP tendrán acceso a %s.", - "Verify settings and count groups" : "Verificar configuraciones y contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Cuando se inicia sesión, %s encontrará al usuario basado en los siguientes atributos:", "LDAP / AD Username:" : "Nombre de usuario LDAP /AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite el inicio de sesión contra el nombre de usuario LDAP / AD, el cual es o el uid o samaccountname y será detectado.", "LDAP / AD Email Address:" : "LDAP / AD dirección de correo electrónico:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite el inicio de sesión contra un atributo de correo electrónico. Correo y dirección primario de correo electrónico está habilitada.", "Other Attributes:" : "Otros atributos:", @@ -75,11 +72,9 @@ "Verify settings" : "Verificar configuración", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", "Copy current configuration into new directory binding" : "Copiar la actual configuración en un nuevo directorio de enlace", "Delete the current configuration" : "Elimina la actual configuración", "Host" : "Servidor", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "Port" : "Puerto", "Detect Port" : "Detectar puerto", "User DN" : "DN usuario", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Los usuarios son usados para almacenar y asignar (meta) datos. Con el fin de identificar de forma precisa y reconocer usuarios, cada usuario de LDAP tendrá un nombre de usuario interno. Esto requiere un mapeo entre el nombre de usuario y el usuario del LDAP. El nombre de usuario creado es mapeado respecto al UUID del usuario en el LDAP. De forma adicional, el DN es cacheado para reducir la interacción entre el LDAP, pero no es usado para identificar. Si el DN cambia, los cambios serán aplicados. El nombre de usuario interno es usado por encima de todo. Limpiar los mapeos dejará restos por todas partes, no es sensible a configuración, ¡afecta a todas las configuraciones del LDAP! Nunca limpies los mapeos en un entorno de producción, únicamente en una fase de desarrollo o experimental.", "Clear Username-LDAP User Mapping" : "Borrar la asignación de los Nombres de usuario de los usuarios LDAP", "Clear Groupname-LDAP Group Mapping" : "Borrar la asignación de los Nombres de grupo de los grupos de LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El marcador de posición %uid no está presente. Será reemplazado con el nombre de inicio de sesión cuando se consulte LDAP / AD.", + "Verify settings and count groups" : "Verificar configuraciones y contar grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite el inicio de sesión contra el nombre de usuario LDAP / AD, el cual es o el uid o samaccountname y será detectado.", + "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "in bytes" : "en bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/es_MX.js b/apps/user_ldap/l10n/es_MX.js index 0412a379b05..6325be9c88e 100644 --- a/apps/user_ldap/l10n/es_MX.js +++ b/apps/user_ldap/l10n/es_MX.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Se presentó un error no especificado. Favor de verificar los ajustes y la bitácroa. ", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "El filtro de la búsqueda es inválido, posiblemente debido a temas de sintaxis como un número diferente de corchetes abiertos y cerrados. Favor de verificar. ", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Se presentó una falla con la conexión al servidor LDAP / AD, favor de verificar el servidor, puerto y credenciales. ", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El id %u del marcador de posición esta faltando. Será reemplazado con el nombre de usuario al consultar LDAP / AD.", "Please provide a login name to test against" : "Favor de proporcionar un nombre de usuario contra el cual probar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "El cuadro de grupo está deshabilitado, porque el servidor LDAP / AD no soporta memberOf.", "Password change rejected. Hint: " : "Cambio de contraseña rechazado. Pista: ", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Editar consulta a LDAP", "LDAP Filter:" : "Filtro de LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "El filtro especifica cuales grupos LDAP tendrán acceso a la instancia %s.", - "Verify settings and count groups" : "Verificar ajustes y contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Al iniciar sesion, %s encontrará al usuario con base en los siguientes atributos:", "LDAP / AD Username:" : "Nombre de usuario LDAP / AD", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite iniciar sesión contra el nombre de usuario LDAP / AD, que es el uid o el samaccountname y será detectado. ", "LDAP / AD Email Address:" : "Dirección de correo electrónico LDAP / AD", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite iniciar sesión contra el atributo correo electrónico. Mail y mailPrimaryAddress serán permitidos.", "Other Attributes:" : "Otros atributos:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Verificar ajustes", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", "Copy current configuration into new directory binding" : "Copiar la configuración actual a un nuevo directorio de vinculación", "Delete the current configuration" : "Borrar la configuración actual", "Host" : "Servidor", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "Port" : "Puerto", "Detect Port" : "Detectar Puerto", "User DN" : "DN del usuario", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Los nombres de usuario son usados para almacenar y asignar (meta) datos. Para poder identificar y reconocer con precisión a los usuarios, cada usuario LDAP contará con un Nombre de usuario interno. Esto requiere un mapeo del Nombre de usuario al usuario LDAP. El nombre de usuario creado se mapea al UUID del usuario LDAP. Adicionalmente el DN se guarda en caché para reducir las interacciones con LDAP, pero no se usa para identificación. Si el DN cambia, las modficaciones serán encontradas. El Nombre del usuario interno se usa en todos lados. Limpiar los mapeos dejará sobras en todos lados. ¡Limpiar los mapeos no es senible a la configuración, afecta a todas las configuraciones LDAP! Nunca borre las configuraciones en el ambiente de producción, sólo hágalo en los ambientes de pruebas o de experimentación. ", "Clear Username-LDAP User Mapping" : "Borrar el mapeo de los Nombres de usuario a los Usuarios LDAP", "Clear Groupname-LDAP Group Mapping" : "Borrar el mapeo de los Nombres de grupo a los grupos de LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El id %u del marcador de posición esta faltando. Será reemplazado con el nombre de usuario al consultar LDAP / AD.", + "Verify settings and count groups" : "Verificar ajustes y contar grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite iniciar sesión contra el nombre de usuario LDAP / AD, que es el uid o el samaccountname y será detectado. ", + "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "in bytes" : "en bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/es_MX.json b/apps/user_ldap/l10n/es_MX.json index 3d0ee9c68b7..1a9742a9e8a 100644 --- a/apps/user_ldap/l10n/es_MX.json +++ b/apps/user_ldap/l10n/es_MX.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Se presentó un error no especificado. Favor de verificar los ajustes y la bitácroa. ", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "El filtro de la búsqueda es inválido, posiblemente debido a temas de sintaxis como un número diferente de corchetes abiertos y cerrados. Favor de verificar. ", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Se presentó una falla con la conexión al servidor LDAP / AD, favor de verificar el servidor, puerto y credenciales. ", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El id %u del marcador de posición esta faltando. Será reemplazado con el nombre de usuario al consultar LDAP / AD.", "Please provide a login name to test against" : "Favor de proporcionar un nombre de usuario contra el cual probar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "El cuadro de grupo está deshabilitado, porque el servidor LDAP / AD no soporta memberOf.", "Password change rejected. Hint: " : "Cambio de contraseña rechazado. Pista: ", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Editar consulta a LDAP", "LDAP Filter:" : "Filtro de LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "El filtro especifica cuales grupos LDAP tendrán acceso a la instancia %s.", - "Verify settings and count groups" : "Verificar ajustes y contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Al iniciar sesion, %s encontrará al usuario con base en los siguientes atributos:", "LDAP / AD Username:" : "Nombre de usuario LDAP / AD", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite iniciar sesión contra el nombre de usuario LDAP / AD, que es el uid o el samaccountname y será detectado. ", "LDAP / AD Email Address:" : "Dirección de correo electrónico LDAP / AD", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite iniciar sesión contra el atributo correo electrónico. Mail y mailPrimaryAddress serán permitidos.", "Other Attributes:" : "Otros atributos:", @@ -75,11 +72,9 @@ "Verify settings" : "Verificar ajustes", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", "Copy current configuration into new directory binding" : "Copiar la configuración actual a un nuevo directorio de vinculación", "Delete the current configuration" : "Borrar la configuración actual", "Host" : "Servidor", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "Port" : "Puerto", "Detect Port" : "Detectar Puerto", "User DN" : "DN del usuario", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Los nombres de usuario son usados para almacenar y asignar (meta) datos. Para poder identificar y reconocer con precisión a los usuarios, cada usuario LDAP contará con un Nombre de usuario interno. Esto requiere un mapeo del Nombre de usuario al usuario LDAP. El nombre de usuario creado se mapea al UUID del usuario LDAP. Adicionalmente el DN se guarda en caché para reducir las interacciones con LDAP, pero no se usa para identificación. Si el DN cambia, las modficaciones serán encontradas. El Nombre del usuario interno se usa en todos lados. Limpiar los mapeos dejará sobras en todos lados. ¡Limpiar los mapeos no es senible a la configuración, afecta a todas las configuraciones LDAP! Nunca borre las configuraciones en el ambiente de producción, sólo hágalo en los ambientes de pruebas o de experimentación. ", "Clear Username-LDAP User Mapping" : "Borrar el mapeo de los Nombres de usuario a los Usuarios LDAP", "Clear Groupname-LDAP Group Mapping" : "Borrar el mapeo de los Nombres de grupo a los grupos de LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "El id %u del marcador de posición esta faltando. Será reemplazado con el nombre de usuario al consultar LDAP / AD.", + "Verify settings and count groups" : "Verificar ajustes y contar grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite iniciar sesión contra el nombre de usuario LDAP / AD, que es el uid o el samaccountname y será detectado. ", + "Add a new and blank configuration" : "Agregar una configuración nueva y en blanco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Puede omitir el protocolo, excepto si requiere SSL. En ese caso, empiece con ldaps://", "in bytes" : "en bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/fr.js b/apps/user_ldap/l10n/fr.js index 53d5d3472cc..938a1e072c5 100644 --- a/apps/user_ldap/l10n/fr.js +++ b/apps/user_ldap/l10n/fr.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Une erreur inconnue s'est produite. Veuillez vérifier les paramètres et le log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Le filtre de recherche n'est pas valide, probablement à cause de problèmes de syntaxe tels que des parenthèses manquantes. Veuillez le corriger.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Une erreur s'est produite lors de la connexion au LDAP / AD. Veuillez vérifier l'hôte, le port et les informations d'identification.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "La chaîne %uid est manquante. Cette chaîne est remplacée par l'identifiant de connexion lors des requêtes LDAP / AD.", "Please provide a login name to test against" : "Veuillez indiquer un identifiant de connexion avec lequel tester.", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Les groupes sont désactivés car le serveur LDAP / AD ne prend pas en charge memberOf.", "Password change rejected. Hint: " : "La modification du mot de passe a été rejetée. Indice :", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Modifier la requête LDAP", "LDAP Filter:" : "Filtre LDAP :", "The filter specifies which LDAP groups shall have access to the %s instance." : "Le filtre spécifie quels groupes LDAP ont accès à l'instance %s.", - "Verify settings and count groups" : "Vérifier les paramètres et compter les groupes", "When logging in, %s will find the user based on the following attributes:" : "Au login, %s cherchera l'utilisateur sur base de ces attributs :", "LDAP / AD Username:" : "Nom d'utilisateur LDAP / AD :", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Autoriser le login avec le nom d'utilisateur LDAP / AD (uid ou samaccountname, la détection est automatique). ", "LDAP / AD Email Address:" : "Adresse mail LDAP / AD :", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Autoriser le login avec une adresse mail. Mail et mailPrimaryAddress sont autorisés.", "Other Attributes:" : "Autres attributs :", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Tester les paramètres", "1. Server" : "1. Serveur", "%s. Server:" : "%s. Serveur :", - "Add a new and blank configuration" : "Ajouter une nouvelle configuration vierge", "Copy current configuration into new directory binding" : "Copier la configuration actuelle vers une nouvelle", "Delete the current configuration" : "Supprimer la configuration actuelle", "Host" : "Hôte", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Vous pouvez omettre le protocole, sauf si vous avez besoin de SSL. Dans ce cas, préfixez avec ldaps://", "Port" : "Port", "Detect Port" : "Détecter le port", "User DN" : "DN Utilisateur", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Les noms d'utilisateurs sont utilisés pour le stockage et l'assignation de (meta) données. Pour identifier et reconnaître précisément les utilisateurs, chaque utilisateur LDAP aura un nom interne spécifique. Cela requiert l'association d'un nom d'utilisateur ownCloud à un nom d'utilisateur LDAP. Le nom d'utilisateur créé est associé à l'attribut UUID de l'utilisateur LDAP. Par ailleurs, le DN est mémorisé en cache pour limiter les interactions LDAP mais il n'est pas utilisé pour l'identification. Si le DN est modifié, ces modifications seront retrouvées. Seul le nom interne à ownCloud est utilisé au sein du produit. Supprimer les associations créera des orphelins et l'action affectera toutes les configurations LDAP. NE JAMAIS SUPPRIMER LES ASSOCIATIONS EN ENVIRONNEMENT DE PRODUCTION, mais uniquement sur des environnements de tests et d'expérimentations.", "Clear Username-LDAP User Mapping" : "Supprimer l'association utilisateur interne-utilisateur LDAP", "Clear Groupname-LDAP Group Mapping" : "Supprimer l'association nom de groupe-groupe LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "La chaîne %uid est manquante. Cette chaîne est remplacée par l'identifiant de connexion lors des requêtes LDAP / AD.", + "Verify settings and count groups" : "Vérifier les paramètres et compter les groupes", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Autoriser le login avec le nom d'utilisateur LDAP / AD (uid ou samaccountname, la détection est automatique). ", + "Add a new and blank configuration" : "Ajouter une nouvelle configuration vierge", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Vous pouvez omettre le protocole, sauf si vous avez besoin de SSL. Dans ce cas, préfixez avec ldaps://", "in bytes" : "en octets" }, "nplurals=2; plural=(n > 1);"); diff --git a/apps/user_ldap/l10n/fr.json b/apps/user_ldap/l10n/fr.json index aa62b75f6e7..4c260a29eb9 100644 --- a/apps/user_ldap/l10n/fr.json +++ b/apps/user_ldap/l10n/fr.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Une erreur inconnue s'est produite. Veuillez vérifier les paramètres et le log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Le filtre de recherche n'est pas valide, probablement à cause de problèmes de syntaxe tels que des parenthèses manquantes. Veuillez le corriger.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Une erreur s'est produite lors de la connexion au LDAP / AD. Veuillez vérifier l'hôte, le port et les informations d'identification.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "La chaîne %uid est manquante. Cette chaîne est remplacée par l'identifiant de connexion lors des requêtes LDAP / AD.", "Please provide a login name to test against" : "Veuillez indiquer un identifiant de connexion avec lequel tester.", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Les groupes sont désactivés car le serveur LDAP / AD ne prend pas en charge memberOf.", "Password change rejected. Hint: " : "La modification du mot de passe a été rejetée. Indice :", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Modifier la requête LDAP", "LDAP Filter:" : "Filtre LDAP :", "The filter specifies which LDAP groups shall have access to the %s instance." : "Le filtre spécifie quels groupes LDAP ont accès à l'instance %s.", - "Verify settings and count groups" : "Vérifier les paramètres et compter les groupes", "When logging in, %s will find the user based on the following attributes:" : "Au login, %s cherchera l'utilisateur sur base de ces attributs :", "LDAP / AD Username:" : "Nom d'utilisateur LDAP / AD :", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Autoriser le login avec le nom d'utilisateur LDAP / AD (uid ou samaccountname, la détection est automatique). ", "LDAP / AD Email Address:" : "Adresse mail LDAP / AD :", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Autoriser le login avec une adresse mail. Mail et mailPrimaryAddress sont autorisés.", "Other Attributes:" : "Autres attributs :", @@ -75,11 +72,9 @@ "Verify settings" : "Tester les paramètres", "1. Server" : "1. Serveur", "%s. Server:" : "%s. Serveur :", - "Add a new and blank configuration" : "Ajouter une nouvelle configuration vierge", "Copy current configuration into new directory binding" : "Copier la configuration actuelle vers une nouvelle", "Delete the current configuration" : "Supprimer la configuration actuelle", "Host" : "Hôte", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Vous pouvez omettre le protocole, sauf si vous avez besoin de SSL. Dans ce cas, préfixez avec ldaps://", "Port" : "Port", "Detect Port" : "Détecter le port", "User DN" : "DN Utilisateur", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Les noms d'utilisateurs sont utilisés pour le stockage et l'assignation de (meta) données. Pour identifier et reconnaître précisément les utilisateurs, chaque utilisateur LDAP aura un nom interne spécifique. Cela requiert l'association d'un nom d'utilisateur ownCloud à un nom d'utilisateur LDAP. Le nom d'utilisateur créé est associé à l'attribut UUID de l'utilisateur LDAP. Par ailleurs, le DN est mémorisé en cache pour limiter les interactions LDAP mais il n'est pas utilisé pour l'identification. Si le DN est modifié, ces modifications seront retrouvées. Seul le nom interne à ownCloud est utilisé au sein du produit. Supprimer les associations créera des orphelins et l'action affectera toutes les configurations LDAP. NE JAMAIS SUPPRIMER LES ASSOCIATIONS EN ENVIRONNEMENT DE PRODUCTION, mais uniquement sur des environnements de tests et d'expérimentations.", "Clear Username-LDAP User Mapping" : "Supprimer l'association utilisateur interne-utilisateur LDAP", "Clear Groupname-LDAP Group Mapping" : "Supprimer l'association nom de groupe-groupe LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "La chaîne %uid est manquante. Cette chaîne est remplacée par l'identifiant de connexion lors des requêtes LDAP / AD.", + "Verify settings and count groups" : "Vérifier les paramètres et compter les groupes", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Autoriser le login avec le nom d'utilisateur LDAP / AD (uid ou samaccountname, la détection est automatique). ", + "Add a new and blank configuration" : "Ajouter une nouvelle configuration vierge", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Vous pouvez omettre le protocole, sauf si vous avez besoin de SSL. Dans ce cas, préfixez avec ldaps://", "in bytes" : "en octets" },"pluralForm" :"nplurals=2; plural=(n > 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/gl.js b/apps/user_ldap/l10n/gl.js index 990e5fa43d1..fa1de5051e8 100644 --- a/apps/user_ldap/l10n/gl.js +++ b/apps/user_ldap/l10n/gl.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Produciuse un erro non agardado. Comprobe os axustes e o rexistro.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "O filtro de busca é incorrecto, probabelmente por mor de erros de sintaxe como un número impar de chaves de apertura/peche. Revíseo.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Produciuse un erro de conexión no LDAP / AD, comprobe a máquina o porto e as credenciais.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Non se atopou o marcador de posición %uid. Vai seren substituído co nome de acceso cando se consulta LDAP / AD.", "Please provide a login name to test against" : "Forneza o nome de acceso para facer a proba", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "A caixa de grupo está desactivada, o servidor LDAP / AD non admite «memberOf».", "_%s group found_::_%s groups found_" : ["Atopouse %s grupo","Atopáronse %s grupos"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "Editar a consulta LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "O filtro especifica que grupos LDAP teñen acceso á instancia %s.", - "Verify settings and count groups" : "Verificar os axustes e contar os grupos", "When logging in, %s will find the user based on the following attributes:" : "Ao acceder, %s atopa o usuario en función dos seguintes atributos:", "LDAP / AD Username:" : "Nome de usuario LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite o acceso contra o nome de usuario LDAP / AD, sexa UID ou «samaccountname» e será detectado.", "LDAP / AD Email Address:" : "Enderezo de correo LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite o acceso contra un atributo de correo-e. Permitirase «Mail» e «mailPrimaryAddress».", "Other Attributes:" : "Outros atributos:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "Verificar os axustes", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Engadir unha configuración nova e en branco", "Copy current configuration into new directory binding" : "Copiar a configuración no novo directorio vinculado", "Delete the current configuration" : "Eliminar a configuración actual", "Host" : "Máquina", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo agás que precise de SSL. Nese caso comece con ldaps://", "Port" : "Porto", "Detect Port" : "Detectar o porto", "User DN" : "DN do usuario", @@ -151,6 +146,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Os nomes de usuario empréganse para almacenar e asignar (meta) datos. Coa fin de identificar con precisión e recoñecer aos usuarios, cada usuario LDAP terá un nome de usuario interno. Isto require unha asignación do nome de usuario a usuario LDAP. O nome de usuario creado asignase ao UUID do usuario LDAP. Ademais o DN almacenase na caché, para así reducir a interacción do LDAP, mais non se utiliza para a identificación. Se o DN cambia, os cambios poden ser atopados. O nome interno do usuario utilizase para todo. A limpeza das asignacións deixará rastros en todas partes. A limpeza das asignacións non é sensíbel á configuración, afecta a todas as configuracións de LDAP! Non limpar nunca as asignacións nun entorno de produción. Limpar as asignacións só en fases de proba ou experimentais.", "Clear Username-LDAP User Mapping" : "Limpar a asignación do usuario ao «nome de usuario LDAP»", "Clear Groupname-LDAP Group Mapping" : "Limpar a asignación do grupo ao «nome de grupo LDAP»", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Non se atopou o marcador de posición %uid. Vai seren substituído co nome de acceso cando se consulta LDAP / AD.", + "Verify settings and count groups" : "Verificar os axustes e contar os grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite o acceso contra o nome de usuario LDAP / AD, sexa UID ou «samaccountname» e será detectado.", + "Add a new and blank configuration" : "Engadir unha configuración nova e en branco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo agás que precise de SSL. Nese caso comece con ldaps://", "in bytes" : "en bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/gl.json b/apps/user_ldap/l10n/gl.json index b3cc83a0971..024d6d6ebb2 100644 --- a/apps/user_ldap/l10n/gl.json +++ b/apps/user_ldap/l10n/gl.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Produciuse un erro non agardado. Comprobe os axustes e o rexistro.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "O filtro de busca é incorrecto, probabelmente por mor de erros de sintaxe como un número impar de chaves de apertura/peche. Revíseo.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Produciuse un erro de conexión no LDAP / AD, comprobe a máquina o porto e as credenciais.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Non se atopou o marcador de posición %uid. Vai seren substituído co nome de acceso cando se consulta LDAP / AD.", "Please provide a login name to test against" : "Forneza o nome de acceso para facer a proba", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "A caixa de grupo está desactivada, o servidor LDAP / AD non admite «memberOf».", "_%s group found_::_%s groups found_" : ["Atopouse %s grupo","Atopáronse %s grupos"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "Editar a consulta LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "O filtro especifica que grupos LDAP teñen acceso á instancia %s.", - "Verify settings and count groups" : "Verificar os axustes e contar os grupos", "When logging in, %s will find the user based on the following attributes:" : "Ao acceder, %s atopa o usuario en función dos seguintes atributos:", "LDAP / AD Username:" : "Nome de usuario LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite o acceso contra o nome de usuario LDAP / AD, sexa UID ou «samaccountname» e será detectado.", "LDAP / AD Email Address:" : "Enderezo de correo LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite o acceso contra un atributo de correo-e. Permitirase «Mail» e «mailPrimaryAddress».", "Other Attributes:" : "Outros atributos:", @@ -72,11 +69,9 @@ "Verify settings" : "Verificar os axustes", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Engadir unha configuración nova e en branco", "Copy current configuration into new directory binding" : "Copiar a configuración no novo directorio vinculado", "Delete the current configuration" : "Eliminar a configuración actual", "Host" : "Máquina", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo agás que precise de SSL. Nese caso comece con ldaps://", "Port" : "Porto", "Detect Port" : "Detectar o porto", "User DN" : "DN do usuario", @@ -149,6 +144,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Os nomes de usuario empréganse para almacenar e asignar (meta) datos. Coa fin de identificar con precisión e recoñecer aos usuarios, cada usuario LDAP terá un nome de usuario interno. Isto require unha asignación do nome de usuario a usuario LDAP. O nome de usuario creado asignase ao UUID do usuario LDAP. Ademais o DN almacenase na caché, para así reducir a interacción do LDAP, mais non se utiliza para a identificación. Se o DN cambia, os cambios poden ser atopados. O nome interno do usuario utilizase para todo. A limpeza das asignacións deixará rastros en todas partes. A limpeza das asignacións non é sensíbel á configuración, afecta a todas as configuracións de LDAP! Non limpar nunca as asignacións nun entorno de produción. Limpar as asignacións só en fases de proba ou experimentais.", "Clear Username-LDAP User Mapping" : "Limpar a asignación do usuario ao «nome de usuario LDAP»", "Clear Groupname-LDAP Group Mapping" : "Limpar a asignación do grupo ao «nome de grupo LDAP»", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Non se atopou o marcador de posición %uid. Vai seren substituído co nome de acceso cando se consulta LDAP / AD.", + "Verify settings and count groups" : "Verificar os axustes e contar os grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permite o acceso contra o nome de usuario LDAP / AD, sexa UID ou «samaccountname» e será detectado.", + "Add a new and blank configuration" : "Engadir unha configuración nova e en branco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo agás que precise de SSL. Nese caso comece con ldaps://", "in bytes" : "en bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/he.js b/apps/user_ldap/l10n/he.js index b645b89a1c2..f5b94e9e10b 100644 --- a/apps/user_ldap/l10n/he.js +++ b/apps/user_ldap/l10n/he.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "אירעה שגיאה לא מזוהה. יש לבדוק את ההגדרות ואת הלוג.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "סינון החיפוש אינו חוקי. ככל הנראה בשל שיאה תחבירית כגון מספר לא שווה של פתח-סוגריים וסגור-סוגריים. יש לתקן.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "אירעה שגיאת חיבור ל- LDAP / AD, יש לבדוק את השרת, שער החיבור - פורט ופרטי הכניסה. ", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "שומר המקום %uid חסר. הוא יוחלף עם שם המשתמש בזמן שאילתת LDAP / AD.", "Please provide a login name to test against" : "יש לספק שם משתמש לבדיקה מולו", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "שדה הקבוצה נוטרל, כיוון ששרת ה- LDAP / AD לא תומך ב- memberOf.", "_%s group found_::_%s groups found_" : ["אותרה %s קבוצה","אותרו %s קבוצות"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "עריכת שאילתת LDAP", "LDAP Filter:" : "מסנן LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "המסנן הקובע לאיזו קבוצת LDAP תהיה יכולת כניסה למקרה %s.", - "Verify settings and count groups" : "מאמת הגדרות וסופר קבוצות", "When logging in, %s will find the user based on the following attributes:" : "כאשר מתחברים, %s יחפש את המשתמש על פי המאפיינים הבאים:", "LDAP / AD Username:" : "שם משתמש LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "מאפשר התחברות אל מול שם משתמש LDAP / AD, שהוא רק uid או samaccountname ויזוהה.", "LDAP / AD Email Address:" : "כתובת דואר אלקטרוני LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "מאפשר התחברות אל מול מאפיין דואר אלקטרוני. Mail וכן mailPrimaryAddress יהיו מותרים לשימוש.", "Other Attributes:" : "מאפיינים נוספים:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "מאמת הגדרות", "1. Server" : "1. שרת", "%s. Server:" : "%s. שרת:", - "Add a new and blank configuration" : "הוספת תצורה חדשה וריקה", "Copy current configuration into new directory binding" : "מעתיק תצורה נוכחית אל תוך תיקייה חדשה", "Delete the current configuration" : "מחיקת תצורה נוכחית", "Host" : "מארח", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "ניתן להשמיט את הפרוטוקול, אך SSL מחייב. לפיכך יש להתחיל עם ldaps://", "Port" : "פורט", "Detect Port" : "מחיקת שער - פורט", "User DN" : "DN משתמש", @@ -147,6 +142,11 @@ OC.L10N.register( "Username-LDAP User Mapping" : "מיפוי שם משתמש LDAP:", "Clear Username-LDAP User Mapping" : "ניקוי מיפוי שם משתמש LDAP:", "Clear Groupname-LDAP Group Mapping" : "ניקוי מיפוי שם משתמש קבוצה LDAP:", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "שומר המקום %uid חסר. הוא יוחלף עם שם המשתמש בזמן שאילתת LDAP / AD.", + "Verify settings and count groups" : "מאמת הגדרות וסופר קבוצות", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "מאפשר התחברות אל מול שם משתמש LDAP / AD, שהוא רק uid או samaccountname ויזוהה.", + "Add a new and blank configuration" : "הוספת תצורה חדשה וריקה", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "ניתן להשמיט את הפרוטוקול, אך SSL מחייב. לפיכך יש להתחיל עם ldaps://", "in bytes" : "בבתים" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/he.json b/apps/user_ldap/l10n/he.json index 8922caaad8e..5fd065da3fa 100644 --- a/apps/user_ldap/l10n/he.json +++ b/apps/user_ldap/l10n/he.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "אירעה שגיאה לא מזוהה. יש לבדוק את ההגדרות ואת הלוג.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "סינון החיפוש אינו חוקי. ככל הנראה בשל שיאה תחבירית כגון מספר לא שווה של פתח-סוגריים וסגור-סוגריים. יש לתקן.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "אירעה שגיאת חיבור ל- LDAP / AD, יש לבדוק את השרת, שער החיבור - פורט ופרטי הכניסה. ", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "שומר המקום %uid חסר. הוא יוחלף עם שם המשתמש בזמן שאילתת LDAP / AD.", "Please provide a login name to test against" : "יש לספק שם משתמש לבדיקה מולו", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "שדה הקבוצה נוטרל, כיוון ששרת ה- LDAP / AD לא תומך ב- memberOf.", "_%s group found_::_%s groups found_" : ["אותרה %s קבוצה","אותרו %s קבוצות"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "עריכת שאילתת LDAP", "LDAP Filter:" : "מסנן LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "המסנן הקובע לאיזו קבוצת LDAP תהיה יכולת כניסה למקרה %s.", - "Verify settings and count groups" : "מאמת הגדרות וסופר קבוצות", "When logging in, %s will find the user based on the following attributes:" : "כאשר מתחברים, %s יחפש את המשתמש על פי המאפיינים הבאים:", "LDAP / AD Username:" : "שם משתמש LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "מאפשר התחברות אל מול שם משתמש LDAP / AD, שהוא רק uid או samaccountname ויזוהה.", "LDAP / AD Email Address:" : "כתובת דואר אלקטרוני LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "מאפשר התחברות אל מול מאפיין דואר אלקטרוני. Mail וכן mailPrimaryAddress יהיו מותרים לשימוש.", "Other Attributes:" : "מאפיינים נוספים:", @@ -72,11 +69,9 @@ "Verify settings" : "מאמת הגדרות", "1. Server" : "1. שרת", "%s. Server:" : "%s. שרת:", - "Add a new and blank configuration" : "הוספת תצורה חדשה וריקה", "Copy current configuration into new directory binding" : "מעתיק תצורה נוכחית אל תוך תיקייה חדשה", "Delete the current configuration" : "מחיקת תצורה נוכחית", "Host" : "מארח", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "ניתן להשמיט את הפרוטוקול, אך SSL מחייב. לפיכך יש להתחיל עם ldaps://", "Port" : "פורט", "Detect Port" : "מחיקת שער - פורט", "User DN" : "DN משתמש", @@ -145,6 +140,11 @@ "Username-LDAP User Mapping" : "מיפוי שם משתמש LDAP:", "Clear Username-LDAP User Mapping" : "ניקוי מיפוי שם משתמש LDAP:", "Clear Groupname-LDAP Group Mapping" : "ניקוי מיפוי שם משתמש קבוצה LDAP:", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "שומר המקום %uid חסר. הוא יוחלף עם שם המשתמש בזמן שאילתת LDAP / AD.", + "Verify settings and count groups" : "מאמת הגדרות וסופר קבוצות", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "מאפשר התחברות אל מול שם משתמש LDAP / AD, שהוא רק uid או samaccountname ויזוהה.", + "Add a new and blank configuration" : "הוספת תצורה חדשה וריקה", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "ניתן להשמיט את הפרוטוקול, אך SSL מחייב. לפיכך יש להתחיל עם ldaps://", "in bytes" : "בבתים" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/hu.js b/apps/user_ldap/l10n/hu.js index b2e14bdfe38..e9c4951a6f8 100644 --- a/apps/user_ldap/l10n/hu.js +++ b/apps/user_ldap/l10n/hu.js @@ -64,7 +64,6 @@ OC.L10N.register( "%s. Server:" : "%s. szerver", "Delete the current configuration" : "Aktuális konfiguráció törlése", "Host" : "Kiszolgáló", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "A protokoll előtag elhagyható, kivéve, ha SSL-t kíván használni. Ebben az esetben kezdje így: ldaps://", "Port" : "Port", "Detect Port" : "Port detektálás", "User DN" : "A kapcsolódó felhasználó DN-je", @@ -129,6 +128,7 @@ OC.L10N.register( "Username-LDAP User Mapping" : "Felhasználó - LDAP felhasználó hozzárendelés", "Clear Username-LDAP User Mapping" : "A felhasználó - LDAP felhasználó hozzárendelés törlése", "Clear Groupname-LDAP Group Mapping" : "A csoport - LDAP csoport hozzárendelés törlése", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "A protokoll előtag elhagyható, kivéve, ha SSL-t kíván használni. Ebben az esetben kezdje így: ldaps://", "in bytes" : "bájtban" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/hu.json b/apps/user_ldap/l10n/hu.json index f17c5952484..7262b24ca07 100644 --- a/apps/user_ldap/l10n/hu.json +++ b/apps/user_ldap/l10n/hu.json @@ -62,7 +62,6 @@ "%s. Server:" : "%s. szerver", "Delete the current configuration" : "Aktuális konfiguráció törlése", "Host" : "Kiszolgáló", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "A protokoll előtag elhagyható, kivéve, ha SSL-t kíván használni. Ebben az esetben kezdje így: ldaps://", "Port" : "Port", "Detect Port" : "Port detektálás", "User DN" : "A kapcsolódó felhasználó DN-je", @@ -127,6 +126,7 @@ "Username-LDAP User Mapping" : "Felhasználó - LDAP felhasználó hozzárendelés", "Clear Username-LDAP User Mapping" : "A felhasználó - LDAP felhasználó hozzárendelés törlése", "Clear Groupname-LDAP Group Mapping" : "A csoport - LDAP csoport hozzárendelés törlése", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "A protokoll előtag elhagyható, kivéve, ha SSL-t kíván használni. Ebben az esetben kezdje így: ldaps://", "in bytes" : "bájtban" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/id.js b/apps/user_ldap/l10n/id.js index ce430bcb515..eedcbc0cd86 100644 --- a/apps/user_ldap/l10n/id.js +++ b/apps/user_ldap/l10n/id.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Terjadi kesalahan yang tidak disebutkan. Mohon periksa pengaturan dan log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Penyaring pencarian tidak sah, kemungkinan karena masalah sintaks seperti jumlah kurung buka dan tutup tidak sama. Mohon diperiksa.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Terjadi kesalahan sambungan ke LDAP / AD, mohon periksa host, port dan kredensial.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Placeholder %uid tidak ada. Placeholder akan digantikan dengan nama login saat melakukan kueri LDAP / AD.", "Please provide a login name to test against" : "Mohon berikan nama login untuk mengujinya kembali", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Kotak grup telah dinonaktifkan, karena server LDAP / AD tidak mendukung keanggotaan.", "Password change rejected. Hint: " : "Perubahan sandi ditolak. Petunjuk:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Sunting Kueri LDAP", "LDAP Filter:" : "Penyaring LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Penyaring menentukan grup LDAP mana yang memiliki akses ke %s.", - "Verify settings and count groups" : "Verifikasi setelan dan hitung grup", "When logging in, %s will find the user based on the following attributes:" : "Pada saat login, %s akan menemukan pengguna berdasarkan atribut berikut:", "LDAP / AD Username:" : "Nama pengguna LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Izinkan login dengan nama pengguna LDAP / AD, baik berupa uid atau samaccountname, mereka akan terdeteksi.", "LDAP / AD Email Address:" : "Alamat Email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Izinkan login dengan atribut email. Mail dan mailPrimaryAddress diperbolehkan.", "Other Attributes:" : "Atribut Lain:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Verifikasi setelan", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Tambah konfigurasi kosong yang baru", "Copy current configuration into new directory binding" : "Salin konfigurasi saat ini kedalam direktori baru", "Delete the current configuration" : "Hapus konfigurasi saat ini", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Anda dapat mengabaikan protokol, kecuali Anda membutuhkan SSL. Lalu jalankan dengan ldaps://", "Port" : "Port", "Detect Port" : "Deteksi Port", "User DN" : "Pengguna DN", @@ -162,6 +157,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Nama pengguna digunakan untuk menyimpan dan menetapkan (meta) data. Dalam rangka untuk mengidentifikasi dan mengenali pengguna secara tepat, setiap pengguna LDAP akan memiliki nama pengguna internal. Hal ini memerlukan sebuah pemetaan dari nama pengguna ke pengguna LDAP. Nama pengguna yang dibuat akan dipetakan pada UUID pengguna LDAP. Selain itu, DN akan di cache untuk mengurangi interaksi LDAP, tetapi tidak digunakan untuk identifikasi. Jika DN berubah, perubahan akan ditemukan. Nama pengguna internal digunakan secara menyeluruh. Membersihkan pemetaan akan mempengaruhi semua konfigurasi LDAP! JANGAN PERNAH MENGHAPUS PEMETAAN PADA LINGKUNGAN PRODUKSI, hanya gunakan dalam tahap uji coba dan pengujian.", "Clear Username-LDAP User Mapping" : "Bersihkan Pemetaan Pengguna LDAP-Nama pengguna", "Clear Groupname-LDAP Group Mapping" : "Bersihkan Pemetaan Grup LDAP-Nama grup", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Placeholder %uid tidak ada. Placeholder akan digantikan dengan nama login saat melakukan kueri LDAP / AD.", + "Verify settings and count groups" : "Verifikasi setelan dan hitung grup", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Izinkan login dengan nama pengguna LDAP / AD, baik berupa uid atau samaccountname, mereka akan terdeteksi.", + "Add a new and blank configuration" : "Tambah konfigurasi kosong yang baru", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Anda dapat mengabaikan protokol, kecuali Anda membutuhkan SSL. Lalu jalankan dengan ldaps://", "in bytes" : "dalam bytes" }, "nplurals=1; plural=0;"); diff --git a/apps/user_ldap/l10n/id.json b/apps/user_ldap/l10n/id.json index 141a94e1c05..880352c979f 100644 --- a/apps/user_ldap/l10n/id.json +++ b/apps/user_ldap/l10n/id.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Terjadi kesalahan yang tidak disebutkan. Mohon periksa pengaturan dan log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Penyaring pencarian tidak sah, kemungkinan karena masalah sintaks seperti jumlah kurung buka dan tutup tidak sama. Mohon diperiksa.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Terjadi kesalahan sambungan ke LDAP / AD, mohon periksa host, port dan kredensial.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Placeholder %uid tidak ada. Placeholder akan digantikan dengan nama login saat melakukan kueri LDAP / AD.", "Please provide a login name to test against" : "Mohon berikan nama login untuk mengujinya kembali", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Kotak grup telah dinonaktifkan, karena server LDAP / AD tidak mendukung keanggotaan.", "Password change rejected. Hint: " : "Perubahan sandi ditolak. Petunjuk:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Sunting Kueri LDAP", "LDAP Filter:" : "Penyaring LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Penyaring menentukan grup LDAP mana yang memiliki akses ke %s.", - "Verify settings and count groups" : "Verifikasi setelan dan hitung grup", "When logging in, %s will find the user based on the following attributes:" : "Pada saat login, %s akan menemukan pengguna berdasarkan atribut berikut:", "LDAP / AD Username:" : "Nama pengguna LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Izinkan login dengan nama pengguna LDAP / AD, baik berupa uid atau samaccountname, mereka akan terdeteksi.", "LDAP / AD Email Address:" : "Alamat Email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Izinkan login dengan atribut email. Mail dan mailPrimaryAddress diperbolehkan.", "Other Attributes:" : "Atribut Lain:", @@ -75,11 +72,9 @@ "Verify settings" : "Verifikasi setelan", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Tambah konfigurasi kosong yang baru", "Copy current configuration into new directory binding" : "Salin konfigurasi saat ini kedalam direktori baru", "Delete the current configuration" : "Hapus konfigurasi saat ini", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Anda dapat mengabaikan protokol, kecuali Anda membutuhkan SSL. Lalu jalankan dengan ldaps://", "Port" : "Port", "Detect Port" : "Deteksi Port", "User DN" : "Pengguna DN", @@ -160,6 +155,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Nama pengguna digunakan untuk menyimpan dan menetapkan (meta) data. Dalam rangka untuk mengidentifikasi dan mengenali pengguna secara tepat, setiap pengguna LDAP akan memiliki nama pengguna internal. Hal ini memerlukan sebuah pemetaan dari nama pengguna ke pengguna LDAP. Nama pengguna yang dibuat akan dipetakan pada UUID pengguna LDAP. Selain itu, DN akan di cache untuk mengurangi interaksi LDAP, tetapi tidak digunakan untuk identifikasi. Jika DN berubah, perubahan akan ditemukan. Nama pengguna internal digunakan secara menyeluruh. Membersihkan pemetaan akan mempengaruhi semua konfigurasi LDAP! JANGAN PERNAH MENGHAPUS PEMETAAN PADA LINGKUNGAN PRODUKSI, hanya gunakan dalam tahap uji coba dan pengujian.", "Clear Username-LDAP User Mapping" : "Bersihkan Pemetaan Pengguna LDAP-Nama pengguna", "Clear Groupname-LDAP Group Mapping" : "Bersihkan Pemetaan Grup LDAP-Nama grup", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Placeholder %uid tidak ada. Placeholder akan digantikan dengan nama login saat melakukan kueri LDAP / AD.", + "Verify settings and count groups" : "Verifikasi setelan dan hitung grup", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Izinkan login dengan nama pengguna LDAP / AD, baik berupa uid atau samaccountname, mereka akan terdeteksi.", + "Add a new and blank configuration" : "Tambah konfigurasi kosong yang baru", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Anda dapat mengabaikan protokol, kecuali Anda membutuhkan SSL. Lalu jalankan dengan ldaps://", "in bytes" : "dalam bytes" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/it.js b/apps/user_ldap/l10n/it.js index 62b13b21db5..2784ac0395c 100644 --- a/apps/user_ldap/l10n/it.js +++ b/apps/user_ldap/l10n/it.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Si è non specificato un errore sconosciuto. Controlla le impostazioni e il file di log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Il filtro di ricerca non è valido, probabilmente a causa di problemi di sintassi come un numero dispari di parentesi aperte e chiuse. Controlla.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Si è verificato un errore di connessione a LDAP / AD, controlla l'host, la porta e le credenziali.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manca il segnaposto %uid. Sarà sostituito con il nome di accesso nelle query a LDAP / AD.", "Please provide a login name to test against" : "Fornisci un nome di accesso da provare", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "La casella dei gruppi è stata disabilitata, poiché il server LDAP / AD non supporta memberOf.", "Password change rejected. Hint: " : "Cambio password rifiutato. Suggerimento:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Modifica query LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Il filtro specifica quali gruppi LDAP devono avere accesso all'istanza %s.", - "Verify settings and count groups" : "Verifica le impostazioni e conta i gruppi", "When logging in, %s will find the user based on the following attributes:" : "Quando accedi, %s troverà l'utente sulla base dei seguenti attributi:", "LDAP / AD Username:" : "Nome utente LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Consente l'accesso tramite il nome utente LDAP / AD, può essere sia uid o samaccountname e sarà rilevato.", "LDAP / AD Email Address:" : "Indirizzo email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Consente l'accesso tramite l'attributo email. Mail e mailPrimaryAddress saranno consentiti.", "Other Attributes:" : "Altri attributi:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Verifica impostazioni", "1. Server" : "1. server", "%s. Server:" : "%s. server:", - "Add a new and blank configuration" : "Aggiunge una nuova configurazione vuota", "Copy current configuration into new directory binding" : "Copia la configurazione attuale nella nuova cartella associata", "Delete the current configuration" : "Elimina la configurazione attuale", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "È possibile omettere il protocollo, ad eccezione se è necessario SSL. Quindi inizia con ldaps://", "Port" : "Porta", "Detect Port" : "Rileva porta", "User DN" : "DN utente", @@ -163,6 +158,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "I nomi utente sono utilizzati per archiviare e assegnare i (meta) dati. Per identificare con precisione e riconoscere gli utenti, ogni utente LDAP avrà un nome utente interno. Ciò richiede un'associazione tra il nome utente e l'utente LDAP. In aggiunta, il DN viene mantenuto in cache per ridurre l'interazione con LDAP, ma non è utilizzato per l'identificazione. Se il DN cambia, le modifiche saranno rilevate. Il nome utente interno è utilizzato dappertutto. La cancellazione delle associazioni lascerà tracce residue ovunque e interesserà tutta la configurazione LDAP. Non cancellare mai le associazioni in un ambiente di produzione, ma solo in una fase sperimentale o di test.", "Clear Username-LDAP User Mapping" : "Cancella associazione Nome utente-Utente LDAP", "Clear Groupname-LDAP Group Mapping" : "Cancella associazione Nome gruppo-Gruppo LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manca il segnaposto %uid. Sarà sostituito con il nome di accesso nelle query a LDAP / AD.", + "Verify settings and count groups" : "Verifica le impostazioni e conta i gruppi", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Consente l'accesso tramite il nome utente LDAP / AD, può essere sia uid o samaccountname e sarà rilevato.", + "Add a new and blank configuration" : "Aggiunge una nuova configurazione vuota", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "È possibile omettere il protocollo, ad eccezione se è necessario SSL. Quindi inizia con ldaps://", "in bytes" : "in byte" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/it.json b/apps/user_ldap/l10n/it.json index 86527f91592..08cdf084b40 100644 --- a/apps/user_ldap/l10n/it.json +++ b/apps/user_ldap/l10n/it.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Si è non specificato un errore sconosciuto. Controlla le impostazioni e il file di log.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Il filtro di ricerca non è valido, probabilmente a causa di problemi di sintassi come un numero dispari di parentesi aperte e chiuse. Controlla.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Si è verificato un errore di connessione a LDAP / AD, controlla l'host, la porta e le credenziali.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manca il segnaposto %uid. Sarà sostituito con il nome di accesso nelle query a LDAP / AD.", "Please provide a login name to test against" : "Fornisci un nome di accesso da provare", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "La casella dei gruppi è stata disabilitata, poiché il server LDAP / AD non supporta memberOf.", "Password change rejected. Hint: " : "Cambio password rifiutato. Suggerimento:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Modifica query LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Il filtro specifica quali gruppi LDAP devono avere accesso all'istanza %s.", - "Verify settings and count groups" : "Verifica le impostazioni e conta i gruppi", "When logging in, %s will find the user based on the following attributes:" : "Quando accedi, %s troverà l'utente sulla base dei seguenti attributi:", "LDAP / AD Username:" : "Nome utente LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Consente l'accesso tramite il nome utente LDAP / AD, può essere sia uid o samaccountname e sarà rilevato.", "LDAP / AD Email Address:" : "Indirizzo email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Consente l'accesso tramite l'attributo email. Mail e mailPrimaryAddress saranno consentiti.", "Other Attributes:" : "Altri attributi:", @@ -75,11 +72,9 @@ "Verify settings" : "Verifica impostazioni", "1. Server" : "1. server", "%s. Server:" : "%s. server:", - "Add a new and blank configuration" : "Aggiunge una nuova configurazione vuota", "Copy current configuration into new directory binding" : "Copia la configurazione attuale nella nuova cartella associata", "Delete the current configuration" : "Elimina la configurazione attuale", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "È possibile omettere il protocollo, ad eccezione se è necessario SSL. Quindi inizia con ldaps://", "Port" : "Porta", "Detect Port" : "Rileva porta", "User DN" : "DN utente", @@ -161,6 +156,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "I nomi utente sono utilizzati per archiviare e assegnare i (meta) dati. Per identificare con precisione e riconoscere gli utenti, ogni utente LDAP avrà un nome utente interno. Ciò richiede un'associazione tra il nome utente e l'utente LDAP. In aggiunta, il DN viene mantenuto in cache per ridurre l'interazione con LDAP, ma non è utilizzato per l'identificazione. Se il DN cambia, le modifiche saranno rilevate. Il nome utente interno è utilizzato dappertutto. La cancellazione delle associazioni lascerà tracce residue ovunque e interesserà tutta la configurazione LDAP. Non cancellare mai le associazioni in un ambiente di produzione, ma solo in una fase sperimentale o di test.", "Clear Username-LDAP User Mapping" : "Cancella associazione Nome utente-Utente LDAP", "Clear Groupname-LDAP Group Mapping" : "Cancella associazione Nome gruppo-Gruppo LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manca il segnaposto %uid. Sarà sostituito con il nome di accesso nelle query a LDAP / AD.", + "Verify settings and count groups" : "Verifica le impostazioni e conta i gruppi", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Consente l'accesso tramite il nome utente LDAP / AD, può essere sia uid o samaccountname e sarà rilevato.", + "Add a new and blank configuration" : "Aggiunge una nuova configurazione vuota", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "È possibile omettere il protocollo, ad eccezione se è necessario SSL. Quindi inizia con ldaps://", "in bytes" : "in byte" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/ja.js b/apps/user_ldap/l10n/ja.js index 8259de8fa51..59a564ddd92 100644 --- a/apps/user_ldap/l10n/ja.js +++ b/apps/user_ldap/l10n/ja.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "不明なエラーが発生しました。設定とログを確認してください。", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "検索フィルターが不正です。恐らく文法の問題で、開き括弧と閉じ括弧がマッチしていません。修正をお願いします。", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP / AD の接続エラーが発生しました。ホスト名、ポート、権限をチェックしてください。", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid のプレースフォルダがありません。プレースフォルダでは、LDAP /ADで問合せするときにログイン名で置き換えられます。", "Please provide a login name to test against" : "テストの為にログイン名を入力してください。", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "グループボックスは無効にされました。LDAP/AD サーバーが MemberOf オプションをサポートしていないからです。", "Password change rejected. Hint: " : "パスワード変更が拒否されました。ヒント：", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "LDAPクエリの編集", "LDAP Filter:" : "LDAP フィルタ：", "The filter specifies which LDAP groups shall have access to the %s instance." : "フィルターは、どの LDAP グループが %s にアクセスするかを指定します。", - "Verify settings and count groups" : "設定を検証し、グループを数える", "When logging in, %s will find the user based on the following attributes:" : "ログイン時に、%s により次の属性からユーザーを見つけます:", "LDAP / AD Username:" : "LDAP/ADユーザー名:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD ユーザー名に対してログインが許可されています。uid か、samaccountname のどちらかが検出されました。", "LDAP / AD Email Address:" : "LDAP / AD メールアドレス:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "メール属性に対してログインが許可されています。メールや mailPrimaryAddress が許可されています。", "Other Attributes:" : "その他の属性:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "設定のチェック", "1. Server" : "1. Server", "%s. Server:" : "%s. サーバー:", - "Add a new and blank configuration" : "空欄の新しい設定を追加", "Copy current configuration into new directory binding" : "現在の設定を新しいディレクトリ設定にコピー", "Delete the current configuration" : "現在の設定を削除", "Host" : "ホスト", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL通信しない場合には、プロトコル名を省略することができます。そうでない場合には、ldaps:// から始めてください。", "Port" : "ポート", "Detect Port" : "ポートの検出", "User DN" : "ユーザーDN", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "ユーザー名は(メタ)データの保存と割り当てに使用されます。ユーザーを正確に識別して認識するために、個々のLDAPユーザは内部ユーザ名を持っています。これは、ユーザー名からLDAPユーザーへのマッピングが必要であることを意味しています。この生成されたユーザ名は、LDAPユーザのUUIDにマッピングされます。加えて、DNがLDAPとのインタラクションを削減するためにキャッシュされますが、識別には利用されません。DNが変わった場合は、変更が検出されます。内部ユーザ名は全体に亘って利用されます。マッピングをクリアすると、いたるところに使われないままの物が残るでしょう。マッピングのクリアは設定に敏感ではありませんが、すべてのLDAPの設定に影響を与えます！本番の環境では決してマッピングをクリアしないでください。テストもしくは実験の段階でのみマッピングのクリアを行なってください。", "Clear Username-LDAP User Mapping" : "ユーザー名とLDAPユーザーのマッピングをクリアする", "Clear Groupname-LDAP Group Mapping" : "グループ名とLDAPグループのマッピングをクリアする", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid のプレースフォルダがありません。プレースフォルダでは、LDAP /ADで問合せするときにログイン名で置き換えられます。", + "Verify settings and count groups" : "設定を検証し、グループを数える", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD ユーザー名に対してログインが許可されています。uid か、samaccountname のどちらかが検出されました。", + "Add a new and blank configuration" : "空欄の新しい設定を追加", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL通信しない場合には、プロトコル名を省略することができます。そうでない場合には、ldaps:// から始めてください。", "in bytes" : "バイト" }, "nplurals=1; plural=0;"); diff --git a/apps/user_ldap/l10n/ja.json b/apps/user_ldap/l10n/ja.json index 2282e1f7e43..be7c1ff5fdf 100644 --- a/apps/user_ldap/l10n/ja.json +++ b/apps/user_ldap/l10n/ja.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "不明なエラーが発生しました。設定とログを確認してください。", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "検索フィルターが不正です。恐らく文法の問題で、開き括弧と閉じ括弧がマッチしていません。修正をお願いします。", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP / AD の接続エラーが発生しました。ホスト名、ポート、権限をチェックしてください。", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid のプレースフォルダがありません。プレースフォルダでは、LDAP /ADで問合せするときにログイン名で置き換えられます。", "Please provide a login name to test against" : "テストの為にログイン名を入力してください。", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "グループボックスは無効にされました。LDAP/AD サーバーが MemberOf オプションをサポートしていないからです。", "Password change rejected. Hint: " : "パスワード変更が拒否されました。ヒント：", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "LDAPクエリの編集", "LDAP Filter:" : "LDAP フィルタ：", "The filter specifies which LDAP groups shall have access to the %s instance." : "フィルターは、どの LDAP グループが %s にアクセスするかを指定します。", - "Verify settings and count groups" : "設定を検証し、グループを数える", "When logging in, %s will find the user based on the following attributes:" : "ログイン時に、%s により次の属性からユーザーを見つけます:", "LDAP / AD Username:" : "LDAP/ADユーザー名:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD ユーザー名に対してログインが許可されています。uid か、samaccountname のどちらかが検出されました。", "LDAP / AD Email Address:" : "LDAP / AD メールアドレス:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "メール属性に対してログインが許可されています。メールや mailPrimaryAddress が許可されています。", "Other Attributes:" : "その他の属性:", @@ -75,11 +72,9 @@ "Verify settings" : "設定のチェック", "1. Server" : "1. Server", "%s. Server:" : "%s. サーバー:", - "Add a new and blank configuration" : "空欄の新しい設定を追加", "Copy current configuration into new directory binding" : "現在の設定を新しいディレクトリ設定にコピー", "Delete the current configuration" : "現在の設定を削除", "Host" : "ホスト", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL通信しない場合には、プロトコル名を省略することができます。そうでない場合には、ldaps:// から始めてください。", "Port" : "ポート", "Detect Port" : "ポートの検出", "User DN" : "ユーザーDN", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "ユーザー名は(メタ)データの保存と割り当てに使用されます。ユーザーを正確に識別して認識するために、個々のLDAPユーザは内部ユーザ名を持っています。これは、ユーザー名からLDAPユーザーへのマッピングが必要であることを意味しています。この生成されたユーザ名は、LDAPユーザのUUIDにマッピングされます。加えて、DNがLDAPとのインタラクションを削減するためにキャッシュされますが、識別には利用されません。DNが変わった場合は、変更が検出されます。内部ユーザ名は全体に亘って利用されます。マッピングをクリアすると、いたるところに使われないままの物が残るでしょう。マッピングのクリアは設定に敏感ではありませんが、すべてのLDAPの設定に影響を与えます！本番の環境では決してマッピングをクリアしないでください。テストもしくは実験の段階でのみマッピングのクリアを行なってください。", "Clear Username-LDAP User Mapping" : "ユーザー名とLDAPユーザーのマッピングをクリアする", "Clear Groupname-LDAP Group Mapping" : "グループ名とLDAPグループのマッピングをクリアする", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid のプレースフォルダがありません。プレースフォルダでは、LDAP /ADで問合せするときにログイン名で置き換えられます。", + "Verify settings and count groups" : "設定を検証し、グループを数える", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD ユーザー名に対してログインが許可されています。uid か、samaccountname のどちらかが検出されました。", + "Add a new and blank configuration" : "空欄の新しい設定を追加", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL通信しない場合には、プロトコル名を省略することができます。そうでない場合には、ldaps:// から始めてください。", "in bytes" : "バイト" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/ko.js b/apps/user_ldap/l10n/ko.js index bbfd2fb24e0..52b000e65b4 100644 --- a/apps/user_ldap/l10n/ko.js +++ b/apps/user_ldap/l10n/ko.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "알 수 없는 오류가 발생했습니다. 설정과 로그를 확인하십시오.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "검색 필터가 잘못되었습니다. 열고 닫는 괄호 쌍이 맞지 않을 수도 있습니다. 확인 후 수정하십시오.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP/AD 연결 오류가 발생했습니다. 호스트, 포트, 인증 정보를 확인하십시오.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid 자리 비움자가 존재하지 않습니다. LDAP/AD에 조회할 때 로그인 사용자 이름으로 대체됩니다.", "Please provide a login name to test against" : "테스트할 로그인 사용자 이름을 입력하십시오", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "LDAP/AD 서버에서 memberOf를 지원하지 않아서 그룹 상자를 비활성화합니다.", "_%s group found_::_%s groups found_" : ["그룹 %s개 찾음"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "LDAP 쿼리 편집", "LDAP Filter:" : "LDAP 필터:", "The filter specifies which LDAP groups shall have access to the %s instance." : "이 필터는 %s에 접근할 수 있는 LDAP 그룹을 설정합니다.", - "Verify settings and count groups" : "설정을 확인하고 그룹 수 계산", "When logging in, %s will find the user based on the following attributes:" : "로그인할 때 %s에서 다음 속성을 기반으로 사용자를 찾습니다:", "LDAP / AD Username:" : "LDAP/AD 사용자 이름:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "uid 또는 samaccountname에 해당하는 LDAP/AD 사용자 이름으로 로그인을 허용합니다. 속성은 자동으로 감지됩니다.", "LDAP / AD Email Address:" : "LDAP/AD 이메일 주소:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "이메일 속성으로 로그인을 허용합니다. Mail 및 mailPrimaryAddress를 허용합니다.", "Other Attributes:" : "기타 속성:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "설정 검사", "1. Server" : "1. 서버", "%s. Server:" : "%s. 서버:", - "Add a new and blank configuration" : "새 빈 설정 추가", "Copy current configuration into new directory binding" : "현재 설정을 새 디렉터리 바인딩으로 복사", "Delete the current configuration" : "현재 설정 삭제", "Host" : "호스트", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL을 사용하지 않으면 프로토콜을 입력하지 않아도 됩니다. SSL을 사용하려면 ldaps://를 입력하십시오.", "Port" : "포트", "Detect Port" : "포트 감지", "User DN" : "사용자 DN", @@ -155,6 +150,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "사용자 이름은 (메타)데이터를 저장하고 할당하는 데 사용됩니다. 사용자를 정확히 식별하기 위해서 모든 LDAP 사용자는 내부 사용자 이름을 갖고 있습니다. 이 정보에 접근하려면 사용자 이름과 LDAP 사용자 사이의 연결을 알아야 합니다. 생성된 사용자 이름은 LDAP 사용자의 UUID에 연결됩니다. LDAP에 연결하는 횟수를 줄이기 위하여 DN을 캐시에 저장하지만, 식별에는 사용하지 않습니다. DN이 변경되었을 때 변경 사항이 적용됩니다. 내부 사용자 이름은 항상 사용됩니다. 매핑을 비우면 과거 매핑의 흔적이 남습니다. 매핑을 비우는 것은 설정에 관계 없이 적용되므로 모든 LDAP 설정에 영향을 줍니다! 테스트 및 실험 단계에서만 매핑을 비우고, 상용 환경에서는 매핑을 비우지 마십시오.", "Clear Username-LDAP User Mapping" : "사용자 이름-LDAP 사용자 매핑 비우기", "Clear Groupname-LDAP Group Mapping" : "그룹 이름-LDAP 그룹 매핑 비우기", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid 자리 비움자가 존재하지 않습니다. LDAP/AD에 조회할 때 로그인 사용자 이름으로 대체됩니다.", + "Verify settings and count groups" : "설정을 확인하고 그룹 수 계산", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "uid 또는 samaccountname에 해당하는 LDAP/AD 사용자 이름으로 로그인을 허용합니다. 속성은 자동으로 감지됩니다.", + "Add a new and blank configuration" : "새 빈 설정 추가", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL을 사용하지 않으면 프로토콜을 입력하지 않아도 됩니다. SSL을 사용하려면 ldaps://를 입력하십시오.", "in bytes" : "바이트 단위" }, "nplurals=1; plural=0;"); diff --git a/apps/user_ldap/l10n/ko.json b/apps/user_ldap/l10n/ko.json index c95192e04fa..370221ddcff 100644 --- a/apps/user_ldap/l10n/ko.json +++ b/apps/user_ldap/l10n/ko.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "알 수 없는 오류가 발생했습니다. 설정과 로그를 확인하십시오.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "검색 필터가 잘못되었습니다. 열고 닫는 괄호 쌍이 맞지 않을 수도 있습니다. 확인 후 수정하십시오.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP/AD 연결 오류가 발생했습니다. 호스트, 포트, 인증 정보를 확인하십시오.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid 자리 비움자가 존재하지 않습니다. LDAP/AD에 조회할 때 로그인 사용자 이름으로 대체됩니다.", "Please provide a login name to test against" : "테스트할 로그인 사용자 이름을 입력하십시오", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "LDAP/AD 서버에서 memberOf를 지원하지 않아서 그룹 상자를 비활성화합니다.", "_%s group found_::_%s groups found_" : ["그룹 %s개 찾음"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "LDAP 쿼리 편집", "LDAP Filter:" : "LDAP 필터:", "The filter specifies which LDAP groups shall have access to the %s instance." : "이 필터는 %s에 접근할 수 있는 LDAP 그룹을 설정합니다.", - "Verify settings and count groups" : "설정을 확인하고 그룹 수 계산", "When logging in, %s will find the user based on the following attributes:" : "로그인할 때 %s에서 다음 속성을 기반으로 사용자를 찾습니다:", "LDAP / AD Username:" : "LDAP/AD 사용자 이름:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "uid 또는 samaccountname에 해당하는 LDAP/AD 사용자 이름으로 로그인을 허용합니다. 속성은 자동으로 감지됩니다.", "LDAP / AD Email Address:" : "LDAP/AD 이메일 주소:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "이메일 속성으로 로그인을 허용합니다. Mail 및 mailPrimaryAddress를 허용합니다.", "Other Attributes:" : "기타 속성:", @@ -72,11 +69,9 @@ "Verify settings" : "설정 검사", "1. Server" : "1. 서버", "%s. Server:" : "%s. 서버:", - "Add a new and blank configuration" : "새 빈 설정 추가", "Copy current configuration into new directory binding" : "현재 설정을 새 디렉터리 바인딩으로 복사", "Delete the current configuration" : "현재 설정 삭제", "Host" : "호스트", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL을 사용하지 않으면 프로토콜을 입력하지 않아도 됩니다. SSL을 사용하려면 ldaps://를 입력하십시오.", "Port" : "포트", "Detect Port" : "포트 감지", "User DN" : "사용자 DN", @@ -153,6 +148,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "사용자 이름은 (메타)데이터를 저장하고 할당하는 데 사용됩니다. 사용자를 정확히 식별하기 위해서 모든 LDAP 사용자는 내부 사용자 이름을 갖고 있습니다. 이 정보에 접근하려면 사용자 이름과 LDAP 사용자 사이의 연결을 알아야 합니다. 생성된 사용자 이름은 LDAP 사용자의 UUID에 연결됩니다. LDAP에 연결하는 횟수를 줄이기 위하여 DN을 캐시에 저장하지만, 식별에는 사용하지 않습니다. DN이 변경되었을 때 변경 사항이 적용됩니다. 내부 사용자 이름은 항상 사용됩니다. 매핑을 비우면 과거 매핑의 흔적이 남습니다. 매핑을 비우는 것은 설정에 관계 없이 적용되므로 모든 LDAP 설정에 영향을 줍니다! 테스트 및 실험 단계에서만 매핑을 비우고, 상용 환경에서는 매핑을 비우지 마십시오.", "Clear Username-LDAP User Mapping" : "사용자 이름-LDAP 사용자 매핑 비우기", "Clear Groupname-LDAP Group Mapping" : "그룹 이름-LDAP 그룹 매핑 비우기", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "%uid 자리 비움자가 존재하지 않습니다. LDAP/AD에 조회할 때 로그인 사용자 이름으로 대체됩니다.", + "Verify settings and count groups" : "설정을 확인하고 그룹 수 계산", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "uid 또는 samaccountname에 해당하는 LDAP/AD 사용자 이름으로 로그인을 허용합니다. 속성은 자동으로 감지됩니다.", + "Add a new and blank configuration" : "새 빈 설정 추가", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL을 사용하지 않으면 프로토콜을 입력하지 않아도 됩니다. SSL을 사용하려면 ldaps://를 입력하십시오.", "in bytes" : "바이트 단위" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/nb.js b/apps/user_ldap/l10n/nb.js index 6de2cb64101..5c4b15583f3 100644 --- a/apps/user_ldap/l10n/nb.js +++ b/apps/user_ldap/l10n/nb.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "En uspesifisert feil oppstod. Sjekk innstillingene og loggen.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Søkefilteret er ugyldig, antakelig pga. syntaksproblemer som ulikt antall start- og sluttparenteser. Sjekk det.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Det oppstod en feil ved tilkobling til LDAP / AD. Sjekk vertsnavn, portnummer og påloggingsdetaljer.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Plassholder %uid mangler. Den erstattes av påloggingsnavnet ved spørring mot LDAP / AD.", "Please provide a login name to test against" : "Oppgi et påloggingsnavn å teste mot", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Gruppeboksen ble deaktivert fordi LDAP- / AD-tjeneren ikke støtter memberOf.", "Password change rejected. Hint: " : "Passordendring avslått. Hint:", @@ -64,10 +63,8 @@ OC.L10N.register( "Edit LDAP Query" : "Rediger LDAP-spørring", "LDAP Filter:" : "LDAP-filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filteret spesifiserer hvilke LDAP-grupper som skal ha tilgang til %s-instansen.", - "Verify settings and count groups" : "Sjekk innstillinger og tell gruppene", "When logging in, %s will find the user based on the following attributes:" : "Ved pålogging vil %s finne brukeren basert på følgende attributter:", "LDAP / AD Username:" : "LDAP / AD brukernavn:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillater pålogging med LDAP / AD brukernavn, som er enten UID eller samaccountname og vil bli oppdaget.", "LDAP / AD Email Address:" : "LDAP / AD e-postadresse:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Alltid logg inn med en e-post-attributt. Mail og mailPrimaryAddress tillates.", "Other Attributes:" : "Andre attributter:", @@ -76,11 +73,9 @@ OC.L10N.register( "Verify settings" : "Sjekk innstillinger", "1. Server" : "1. Tjener", "%s. Server:" : "%s. tjener:", - "Add a new and blank configuration" : "Legg til et nytt tomt oppsett", "Copy current configuration into new directory binding" : "Kopier gjeldende konfigurasjon til ny katalogbinding", "Delete the current configuration" : "Slett gjeldende konfigurasjon", "Host" : "Tjener", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan utelate protokollen, men du krever bruk av SSL. Deretter start med ldaps://", "Port" : "Port", "Detect Port" : "Påvis port", "User DN" : "Bruker-DN", @@ -156,6 +151,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Brukernavn brukes til å lagre og tilordne (meta)data. For at brukere skal identifiseres og gjenkjennes presist, vil hver LDAP-bruker ha et internt brukernavn. Dette krever en tilknytning fra brukernavn til LDAP-bruker. Brukernavn som opprettes blir knyttet til LDAP-brukerens UUID. I tillegg mellomlagres DN for å redusere LDAP-kommunikasjon, men det brukes ikke til identifisering. Hvis DN endres vil endringene bli oppdaget. Det interne brukernavnet brukes alle steder. Nullstilling av tilknytningene vil etterlate seg rester overalt. Nullstilling av tilknytningene skjer ikke pr. konfigurasjon, det påvirker alle LDAP-konfigurasjoner! Nullstill aldri tilknytningene i et produksjonsmiljø, kun ved testing eller eksperimentering.", "Clear Username-LDAP User Mapping" : "Nullstill tilknytning av brukernavn til LDAP-bruker", "Clear Groupname-LDAP Group Mapping" : "Nullstill tilknytning av gruppenavn til LDAP-gruppe", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Plassholder %uid mangler. Den erstattes av påloggingsnavnet ved spørring mot LDAP / AD.", + "Verify settings and count groups" : "Sjekk innstillinger og tell gruppene", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillater pålogging med LDAP / AD brukernavn, som er enten UID eller samaccountname og vil bli oppdaget.", + "Add a new and blank configuration" : "Legg til et nytt tomt oppsett", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan utelate protokollen, men du krever bruk av SSL. Deretter start med ldaps://", "in bytes" : "i Byte" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/nb.json b/apps/user_ldap/l10n/nb.json index 8c4d38a6480..16ddc1024ac 100644 --- a/apps/user_ldap/l10n/nb.json +++ b/apps/user_ldap/l10n/nb.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "En uspesifisert feil oppstod. Sjekk innstillingene og loggen.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Søkefilteret er ugyldig, antakelig pga. syntaksproblemer som ulikt antall start- og sluttparenteser. Sjekk det.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Det oppstod en feil ved tilkobling til LDAP / AD. Sjekk vertsnavn, portnummer og påloggingsdetaljer.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Plassholder %uid mangler. Den erstattes av påloggingsnavnet ved spørring mot LDAP / AD.", "Please provide a login name to test against" : "Oppgi et påloggingsnavn å teste mot", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Gruppeboksen ble deaktivert fordi LDAP- / AD-tjeneren ikke støtter memberOf.", "Password change rejected. Hint: " : "Passordendring avslått. Hint:", @@ -62,10 +61,8 @@ "Edit LDAP Query" : "Rediger LDAP-spørring", "LDAP Filter:" : "LDAP-filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filteret spesifiserer hvilke LDAP-grupper som skal ha tilgang til %s-instansen.", - "Verify settings and count groups" : "Sjekk innstillinger og tell gruppene", "When logging in, %s will find the user based on the following attributes:" : "Ved pålogging vil %s finne brukeren basert på følgende attributter:", "LDAP / AD Username:" : "LDAP / AD brukernavn:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillater pålogging med LDAP / AD brukernavn, som er enten UID eller samaccountname og vil bli oppdaget.", "LDAP / AD Email Address:" : "LDAP / AD e-postadresse:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Alltid logg inn med en e-post-attributt. Mail og mailPrimaryAddress tillates.", "Other Attributes:" : "Andre attributter:", @@ -74,11 +71,9 @@ "Verify settings" : "Sjekk innstillinger", "1. Server" : "1. Tjener", "%s. Server:" : "%s. tjener:", - "Add a new and blank configuration" : "Legg til et nytt tomt oppsett", "Copy current configuration into new directory binding" : "Kopier gjeldende konfigurasjon til ny katalogbinding", "Delete the current configuration" : "Slett gjeldende konfigurasjon", "Host" : "Tjener", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan utelate protokollen, men du krever bruk av SSL. Deretter start med ldaps://", "Port" : "Port", "Detect Port" : "Påvis port", "User DN" : "Bruker-DN", @@ -154,6 +149,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Brukernavn brukes til å lagre og tilordne (meta)data. For at brukere skal identifiseres og gjenkjennes presist, vil hver LDAP-bruker ha et internt brukernavn. Dette krever en tilknytning fra brukernavn til LDAP-bruker. Brukernavn som opprettes blir knyttet til LDAP-brukerens UUID. I tillegg mellomlagres DN for å redusere LDAP-kommunikasjon, men det brukes ikke til identifisering. Hvis DN endres vil endringene bli oppdaget. Det interne brukernavnet brukes alle steder. Nullstilling av tilknytningene vil etterlate seg rester overalt. Nullstilling av tilknytningene skjer ikke pr. konfigurasjon, det påvirker alle LDAP-konfigurasjoner! Nullstill aldri tilknytningene i et produksjonsmiljø, kun ved testing eller eksperimentering.", "Clear Username-LDAP User Mapping" : "Nullstill tilknytning av brukernavn til LDAP-bruker", "Clear Groupname-LDAP Group Mapping" : "Nullstill tilknytning av gruppenavn til LDAP-gruppe", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Plassholder %uid mangler. Den erstattes av påloggingsnavnet ved spørring mot LDAP / AD.", + "Verify settings and count groups" : "Sjekk innstillinger og tell gruppene", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Tillater pålogging med LDAP / AD brukernavn, som er enten UID eller samaccountname og vil bli oppdaget.", + "Add a new and blank configuration" : "Legg til et nytt tomt oppsett", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du kan utelate protokollen, men du krever bruk av SSL. Deretter start med ldaps://", "in bytes" : "i Byte" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/nl.js b/apps/user_ldap/l10n/nl.js index aad2572fd1b..6af439d2da3 100644 --- a/apps/user_ldap/l10n/nl.js +++ b/apps/user_ldap/l10n/nl.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Er trad een ongedefinieerde fout op. Controleer de instellingen en de logging.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Het zoekfilter is ongeldig, waarschijnlijk door syntax problemen zoals een ongelijk aantal open- en sluithaakjes. Graag aanpassen.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Er trad een verbindingsfout naar LDAP / AD op, verifieer servernaam, poort en inloggegevens.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "De %uid opvultekst ontbreekt. Die wordt vervangen door de inlognaam bij het bevragen van LDAP / AD.", "Please provide a login name to test against" : "Geef een inlognaam op om opnieuw tegen te testen", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "De groepsbox was uitgeschakeld, omdat de LDAP / AD server het attribuut memberOf niet ondersteunt.", "Password change rejected. Hint: " : "Wachtwoordwijziging geweigerd. Hint:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Bewerken LDAP opvraging", "LDAP Filter:" : "LDAP Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Dit filter geeft aan welke LDAP groepen toegang hebben tot %s.", - "Verify settings and count groups" : "Verifiëren instellingen en tel groepen", "When logging in, %s will find the user based on the following attributes:" : "Bij inloggen vindt %s de gebruiker gebaseerd op de volgende attributen:", "LDAP / AD Username:" : "LDAP / AD gebruikersnaam:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Maakt inloggen tegen de LDAP / AD gebruikersnaam mogelijk, ofwel uid of samaccountname en wordt gedetecteerd.", "LDAP / AD Email Address:" : "LDAP / AD e-mailadres:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Maak inloggen tegen een e-mailattribuut mogelijk. E-mail en mailPrimaryAddress zijn mogelijk.", "Other Attributes:" : "Overige attributen:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Verifiëren instellingen", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Toevoegen nieuwe, blanco configuratie", "Copy current configuration into new directory binding" : "Kopieer de huidige configuratie naar een nieuwe directory binding", "Delete the current configuration" : "Verwijder de huidige configuratie", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Je kunt het protocol weglaten, tenzij je SSL vereist. Start in dat geval met ldaps://", "Port" : "Poort", "Detect Port" : "Detecteer poort", "User DN" : "User DN", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Gebruikersnamen worden gebruikt om (meta) data op te slaan en toe te wijzen. Om gebruikers uniek te identificeren, krijgt elke LDAP-gebruiker ook een interne gebruikersnaam. Dit vereist een koppeling van de gebruikersnaam naar een LDAP-gebruiker. De gecreëerde gebruikersnaam is gekoppeld aan de UUID van de LDAP-gebruiker. Aanvullend wordt ook de 'DN' gecached om het aantal LDAP-interacties te verminderen, maar dit wordt niet gebruikt voor identificatie. Als de DN verandert, zullen de veranderingen worden gevonden. De interne gebruikersnaam wordt overal gebruikt. Het wissen van de koppeling zal overal resten achterlaten. Het wissen van koppelingen is niet configuratiegevoelig, maar het raakt wel alle LDAP instellingen! Zorg ervoor dat deze koppelingen nooit in een productieomgeving gewist worden. Maak ze alleen leeg in een test- of ontwikkelomgeving.", "Clear Username-LDAP User Mapping" : "Leegmaken Gebruikersnaam-LDAP gebruikers vertaling", "Clear Groupname-LDAP Group Mapping" : "Leegmaken Groepsnaam-LDAP groep vertaling", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "De %uid opvultekst ontbreekt. Die wordt vervangen door de inlognaam bij het bevragen van LDAP / AD.", + "Verify settings and count groups" : "Verifiëren instellingen en tel groepen", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Maakt inloggen tegen de LDAP / AD gebruikersnaam mogelijk, ofwel uid of samaccountname en wordt gedetecteerd.", + "Add a new and blank configuration" : "Toevoegen nieuwe, blanco configuratie", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Je kunt het protocol weglaten, tenzij je SSL vereist. Start in dat geval met ldaps://", "in bytes" : "in bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/nl.json b/apps/user_ldap/l10n/nl.json index 95775753710..c6dacc627b9 100644 --- a/apps/user_ldap/l10n/nl.json +++ b/apps/user_ldap/l10n/nl.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Er trad een ongedefinieerde fout op. Controleer de instellingen en de logging.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Het zoekfilter is ongeldig, waarschijnlijk door syntax problemen zoals een ongelijk aantal open- en sluithaakjes. Graag aanpassen.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Er trad een verbindingsfout naar LDAP / AD op, verifieer servernaam, poort en inloggegevens.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "De %uid opvultekst ontbreekt. Die wordt vervangen door de inlognaam bij het bevragen van LDAP / AD.", "Please provide a login name to test against" : "Geef een inlognaam op om opnieuw tegen te testen", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "De groepsbox was uitgeschakeld, omdat de LDAP / AD server het attribuut memberOf niet ondersteunt.", "Password change rejected. Hint: " : "Wachtwoordwijziging geweigerd. Hint:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Bewerken LDAP opvraging", "LDAP Filter:" : "LDAP Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Dit filter geeft aan welke LDAP groepen toegang hebben tot %s.", - "Verify settings and count groups" : "Verifiëren instellingen en tel groepen", "When logging in, %s will find the user based on the following attributes:" : "Bij inloggen vindt %s de gebruiker gebaseerd op de volgende attributen:", "LDAP / AD Username:" : "LDAP / AD gebruikersnaam:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Maakt inloggen tegen de LDAP / AD gebruikersnaam mogelijk, ofwel uid of samaccountname en wordt gedetecteerd.", "LDAP / AD Email Address:" : "LDAP / AD e-mailadres:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Maak inloggen tegen een e-mailattribuut mogelijk. E-mail en mailPrimaryAddress zijn mogelijk.", "Other Attributes:" : "Overige attributen:", @@ -75,11 +72,9 @@ "Verify settings" : "Verifiëren instellingen", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Toevoegen nieuwe, blanco configuratie", "Copy current configuration into new directory binding" : "Kopieer de huidige configuratie naar een nieuwe directory binding", "Delete the current configuration" : "Verwijder de huidige configuratie", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Je kunt het protocol weglaten, tenzij je SSL vereist. Start in dat geval met ldaps://", "Port" : "Poort", "Detect Port" : "Detecteer poort", "User DN" : "User DN", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Gebruikersnamen worden gebruikt om (meta) data op te slaan en toe te wijzen. Om gebruikers uniek te identificeren, krijgt elke LDAP-gebruiker ook een interne gebruikersnaam. Dit vereist een koppeling van de gebruikersnaam naar een LDAP-gebruiker. De gecreëerde gebruikersnaam is gekoppeld aan de UUID van de LDAP-gebruiker. Aanvullend wordt ook de 'DN' gecached om het aantal LDAP-interacties te verminderen, maar dit wordt niet gebruikt voor identificatie. Als de DN verandert, zullen de veranderingen worden gevonden. De interne gebruikersnaam wordt overal gebruikt. Het wissen van de koppeling zal overal resten achterlaten. Het wissen van koppelingen is niet configuratiegevoelig, maar het raakt wel alle LDAP instellingen! Zorg ervoor dat deze koppelingen nooit in een productieomgeving gewist worden. Maak ze alleen leeg in een test- of ontwikkelomgeving.", "Clear Username-LDAP User Mapping" : "Leegmaken Gebruikersnaam-LDAP gebruikers vertaling", "Clear Groupname-LDAP Group Mapping" : "Leegmaken Groepsnaam-LDAP groep vertaling", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "De %uid opvultekst ontbreekt. Die wordt vervangen door de inlognaam bij het bevragen van LDAP / AD.", + "Verify settings and count groups" : "Verifiëren instellingen en tel groepen", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Maakt inloggen tegen de LDAP / AD gebruikersnaam mogelijk, ofwel uid of samaccountname en wordt gedetecteerd.", + "Add a new and blank configuration" : "Toevoegen nieuwe, blanco configuratie", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Je kunt het protocol weglaten, tenzij je SSL vereist. Start in dat geval met ldaps://", "in bytes" : "in bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/pl.js b/apps/user_ldap/l10n/pl.js index fba184c346c..4b4bc4a94bc 100644 --- a/apps/user_ldap/l10n/pl.js +++ b/apps/user_ldap/l10n/pl.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Błąd niewiadomego pochodzenia. Sprawdź proszę ustawienia i logi.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filtr szukania jest nieprawidłowy, prawdopodobnie przez problem składniowy taki jak nierówna liczba otwartych i zamkniętych nawiasów. Zweryfikuj to.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Błąd połączenia do LDAP / AD, proszę sprawdzić adres hosta, port i poświadczenia.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Nie znaleziono zamiennika dla %uid. Podczas odpytywania LDAP-a / AD będzie zastąpiony nazwą użytkownika.", "Please provide a login name to test against" : "Wprowadź nazwę użytkownika, aby wykonać test ponownie", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Wpisy dla grup zostały wyłączone, ponieważ LDAP / AD nie wspiera memberOf.", "Password change rejected. Hint: " : "Zmiana hasła odrzucona: Wskazówka:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Edytuj zapytanie LDAP", "LDAP Filter:" : "Filtr LDAP", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtr określa, które grupy LDAP powinny mieć dostęp do instancji %s.", - "Verify settings and count groups" : "Zweryfikuj ustawienia i policz grupy", "When logging in, %s will find the user based on the following attributes:" : "Podczas logowania, %s znajdzie użytkownika na podstawie następujących atrybutów:", "LDAP / AD Username:" : "Nazwa użytkownika LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Pozwól na zalogowanie się nazwą użytkownika z LDAP-a / AD, czyli również przez uid lub samaccountname i będzie to wykryte.", "LDAP / AD Email Address:" : "Adres email LDAP/AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Pozwól na logowanie poprzez atrybut email. Mail i mailPrimaryAddress będą dozwolone.", "Other Attributes:" : "Inne atrybuty:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Weryfikuj ustawienia", "1. Server" : "1. Serwer", "%s. Server:" : "%s. Serwer:", - "Add a new and blank configuration" : "Dodaj nową pustą konfigurację", "Copy current configuration into new directory binding" : "Kopiuje aktualną konfigurację do nowej lokalizacji", "Delete the current configuration" : "Usuwa aktualną konfigurację", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Można pominąć protokół, z wyjątkiem wymaganego protokołu SSL. Następnie uruchom z ldaps://", "Port" : "Port", "Detect Port" : "Wykryj port", "User DN" : "Użytkownik DN", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Nazwy użytkowników służą do przechowywania i przypisywania (meta) danych. W celu dokładnego określenia i rozpoznawania użytkowników, każdy użytkownik LDAP ma przypisaną wewnętrzną nazwę użytkownika. Wymaga to mapowania nazwy użytkownika do użytkownika LDAP. Utworzona nazwa użytkownika jest odwzorowywana na UUID użytkownika LDAP. Dodatkowo DN są buforowane, także w celu zmniejszenia oddziaływania LDAP, ale nie są stosowane do identyfikacji. Po zmianie DN, będzie można znaleźć zmiany. Wewnętrzna nazwa jest używana wszędzie. Usuwanie mapowania będzie miało wpływ wszędzie. Usuwanie mapowania nie jest wrażliwe na konfiguracje, dotyczy to wszystkich konfiguracji LDAP! Nigdy nie usuwaj mapowania w środowisku produkcyjnym, jest to dopuszczalne tylko w fazie eksperymentalnej, testowej.", "Clear Username-LDAP User Mapping" : "Czyść Mapowanie użytkownika LDAP", "Clear Groupname-LDAP Group Mapping" : "Czyść Mapowanie nazwy grupy LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Nie znaleziono zamiennika dla %uid. Podczas odpytywania LDAP-a / AD będzie zastąpiony nazwą użytkownika.", + "Verify settings and count groups" : "Zweryfikuj ustawienia i policz grupy", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Pozwól na zalogowanie się nazwą użytkownika z LDAP-a / AD, czyli również przez uid lub samaccountname i będzie to wykryte.", + "Add a new and blank configuration" : "Dodaj nową pustą konfigurację", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Można pominąć protokół, z wyjątkiem wymaganego protokołu SSL. Następnie uruchom z ldaps://", "in bytes" : "w bajtach" }, "nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>=14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);"); diff --git a/apps/user_ldap/l10n/pl.json b/apps/user_ldap/l10n/pl.json index 0a5f4434ea0..159b1441666 100644 --- a/apps/user_ldap/l10n/pl.json +++ b/apps/user_ldap/l10n/pl.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Błąd niewiadomego pochodzenia. Sprawdź proszę ustawienia i logi.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filtr szukania jest nieprawidłowy, prawdopodobnie przez problem składniowy taki jak nierówna liczba otwartych i zamkniętych nawiasów. Zweryfikuj to.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Błąd połączenia do LDAP / AD, proszę sprawdzić adres hosta, port i poświadczenia.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Nie znaleziono zamiennika dla %uid. Podczas odpytywania LDAP-a / AD będzie zastąpiony nazwą użytkownika.", "Please provide a login name to test against" : "Wprowadź nazwę użytkownika, aby wykonać test ponownie", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Wpisy dla grup zostały wyłączone, ponieważ LDAP / AD nie wspiera memberOf.", "Password change rejected. Hint: " : "Zmiana hasła odrzucona: Wskazówka:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Edytuj zapytanie LDAP", "LDAP Filter:" : "Filtr LDAP", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtr określa, które grupy LDAP powinny mieć dostęp do instancji %s.", - "Verify settings and count groups" : "Zweryfikuj ustawienia i policz grupy", "When logging in, %s will find the user based on the following attributes:" : "Podczas logowania, %s znajdzie użytkownika na podstawie następujących atrybutów:", "LDAP / AD Username:" : "Nazwa użytkownika LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Pozwól na zalogowanie się nazwą użytkownika z LDAP-a / AD, czyli również przez uid lub samaccountname i będzie to wykryte.", "LDAP / AD Email Address:" : "Adres email LDAP/AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Pozwól na logowanie poprzez atrybut email. Mail i mailPrimaryAddress będą dozwolone.", "Other Attributes:" : "Inne atrybuty:", @@ -75,11 +72,9 @@ "Verify settings" : "Weryfikuj ustawienia", "1. Server" : "1. Serwer", "%s. Server:" : "%s. Serwer:", - "Add a new and blank configuration" : "Dodaj nową pustą konfigurację", "Copy current configuration into new directory binding" : "Kopiuje aktualną konfigurację do nowej lokalizacji", "Delete the current configuration" : "Usuwa aktualną konfigurację", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Można pominąć protokół, z wyjątkiem wymaganego protokołu SSL. Następnie uruchom z ldaps://", "Port" : "Port", "Detect Port" : "Wykryj port", "User DN" : "Użytkownik DN", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Nazwy użytkowników służą do przechowywania i przypisywania (meta) danych. W celu dokładnego określenia i rozpoznawania użytkowników, każdy użytkownik LDAP ma przypisaną wewnętrzną nazwę użytkownika. Wymaga to mapowania nazwy użytkownika do użytkownika LDAP. Utworzona nazwa użytkownika jest odwzorowywana na UUID użytkownika LDAP. Dodatkowo DN są buforowane, także w celu zmniejszenia oddziaływania LDAP, ale nie są stosowane do identyfikacji. Po zmianie DN, będzie można znaleźć zmiany. Wewnętrzna nazwa jest używana wszędzie. Usuwanie mapowania będzie miało wpływ wszędzie. Usuwanie mapowania nie jest wrażliwe na konfiguracje, dotyczy to wszystkich konfiguracji LDAP! Nigdy nie usuwaj mapowania w środowisku produkcyjnym, jest to dopuszczalne tylko w fazie eksperymentalnej, testowej.", "Clear Username-LDAP User Mapping" : "Czyść Mapowanie użytkownika LDAP", "Clear Groupname-LDAP Group Mapping" : "Czyść Mapowanie nazwy grupy LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Nie znaleziono zamiennika dla %uid. Podczas odpytywania LDAP-a / AD będzie zastąpiony nazwą użytkownika.", + "Verify settings and count groups" : "Zweryfikuj ustawienia i policz grupy", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Pozwól na zalogowanie się nazwą użytkownika z LDAP-a / AD, czyli również przez uid lub samaccountname i będzie to wykryte.", + "Add a new and blank configuration" : "Dodaj nową pustą konfigurację", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Można pominąć protokół, z wyjątkiem wymaganego protokołu SSL. Następnie uruchom z ldaps://", "in bytes" : "w bajtach" },"pluralForm" :"nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>=14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/pt_BR.js b/apps/user_ldap/l10n/pt_BR.js index 494115729ed..07fd26f8964 100644 --- a/apps/user_ldap/l10n/pt_BR.js +++ b/apps/user_ldap/l10n/pt_BR.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Ocorreu um erro não especificado. Por favor, verifique as configurações e os logs.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "O filtro de pesquisa é inválido, provavelmente devido a questões de sintaxe, como número ímpar de colchetes abertos e fechados. Por favor, revise.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Um erro de conexão para LDAP / AD ocorreu, por favor, verifique host, porta e as credenciais.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O espaço reservado ID %u está faltando. Ele será substituído pelo nome de login ao consultar LDAP / AD.", "Please provide a login name to test against" : "Por favor, forneça um nome de login para testar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "A caixa do grupo foi desativada pois o servidor LDAP / AD não suporta memberOf.", "Password change rejected. Hint: " : "Troca de senha rejeitada. Dica:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Editar consulta LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "O filtro especifica quais grupos LDAP devem ter acesso à instância do %s.", - "Verify settings and count groups" : "Verificar as configurações e grupos de conta", "When logging in, %s will find the user based on the following attributes:" : "Ao entrar, %s vai encontrar o usuário com base nos seguintes atributos:", "LDAP / AD Username:" : "Nome do usuário LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir o login com o nome de usuário LDAP / AD, que é ou UID ou samaccountname e será detectado.", "LDAP / AD Email Address:" : "Endereço de e-mail LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite o login com um atributo de e-mail. Email e mailPrimaryAddress serão permitidos.", "Other Attributes:" : "Outros Atributos:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Verificar configurações", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Adiciona uma configuração nova em branco", "Copy current configuration into new directory binding" : "Copie a configuração atual em um novo diretório vinculado", "Delete the current configuration" : "Excluir a configuração atual", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Você pode omitir o protocolo, exceto quando o SSL é requerido. Então inicie com ldaps://", "Port" : "Porta", "Detect Port" : "Detectar Porta", "User DN" : "DN do usuário", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Nomes de usuários são usados para armazenar e atribuir dados (meta). A fim de identificar e reconhecer precisamente os usuários, cada usuário LDAP terá um nome de usuário interno. Isso requer um mapeamento do nome de usuário para o usuário LDAP. O nome de usuário criado é mapeado para o UUID do usuário LDAP. Além disso, o DN é armazenado em cache para reduzir a interação LDAP mas não é usado para identificação. Se o DN mudar, as mudanças serão encontradas. O nome de usuário interno é usado por toda parte. Limpando os mapeamentos terá sobras em todos os lugares. A limpeza dos mapeamentos não é case sensitive e afeta todas as configurações LDAP! Nunca limpe os mapeamentos em um ambiente de produção, somente em um teste ou estágio experimental.", "Clear Username-LDAP User Mapping" : "Limpar Mapeamento de Usuário username-LDAP", "Clear Groupname-LDAP Group Mapping" : "Limpar Mapeamento do Grupo groupname-LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O espaço reservado ID %u está faltando. Ele será substituído pelo nome de login ao consultar LDAP / AD.", + "Verify settings and count groups" : "Verificar as configurações e grupos de conta", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir o login com o nome de usuário LDAP / AD, que é ou UID ou samaccountname e será detectado.", + "Add a new and blank configuration" : "Adiciona uma configuração nova em branco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Você pode omitir o protocolo, exceto quando o SSL é requerido. Então inicie com ldaps://", "in bytes" : "em bytes" }, "nplurals=2; plural=(n > 1);"); diff --git a/apps/user_ldap/l10n/pt_BR.json b/apps/user_ldap/l10n/pt_BR.json index d26edb2733d..df26537d14f 100644 --- a/apps/user_ldap/l10n/pt_BR.json +++ b/apps/user_ldap/l10n/pt_BR.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Ocorreu um erro não especificado. Por favor, verifique as configurações e os logs.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "O filtro de pesquisa é inválido, provavelmente devido a questões de sintaxe, como número ímpar de colchetes abertos e fechados. Por favor, revise.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Um erro de conexão para LDAP / AD ocorreu, por favor, verifique host, porta e as credenciais.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O espaço reservado ID %u está faltando. Ele será substituído pelo nome de login ao consultar LDAP / AD.", "Please provide a login name to test against" : "Por favor, forneça um nome de login para testar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "A caixa do grupo foi desativada pois o servidor LDAP / AD não suporta memberOf.", "Password change rejected. Hint: " : "Troca de senha rejeitada. Dica:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Editar consulta LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "O filtro especifica quais grupos LDAP devem ter acesso à instância do %s.", - "Verify settings and count groups" : "Verificar as configurações e grupos de conta", "When logging in, %s will find the user based on the following attributes:" : "Ao entrar, %s vai encontrar o usuário com base nos seguintes atributos:", "LDAP / AD Username:" : "Nome do usuário LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir o login com o nome de usuário LDAP / AD, que é ou UID ou samaccountname e será detectado.", "LDAP / AD Email Address:" : "Endereço de e-mail LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permite o login com um atributo de e-mail. Email e mailPrimaryAddress serão permitidos.", "Other Attributes:" : "Outros Atributos:", @@ -75,11 +72,9 @@ "Verify settings" : "Verificar configurações", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor:", - "Add a new and blank configuration" : "Adiciona uma configuração nova em branco", "Copy current configuration into new directory binding" : "Copie a configuração atual em um novo diretório vinculado", "Delete the current configuration" : "Excluir a configuração atual", "Host" : "Host", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Você pode omitir o protocolo, exceto quando o SSL é requerido. Então inicie com ldaps://", "Port" : "Porta", "Detect Port" : "Detectar Porta", "User DN" : "DN do usuário", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Nomes de usuários são usados para armazenar e atribuir dados (meta). A fim de identificar e reconhecer precisamente os usuários, cada usuário LDAP terá um nome de usuário interno. Isso requer um mapeamento do nome de usuário para o usuário LDAP. O nome de usuário criado é mapeado para o UUID do usuário LDAP. Além disso, o DN é armazenado em cache para reduzir a interação LDAP mas não é usado para identificação. Se o DN mudar, as mudanças serão encontradas. O nome de usuário interno é usado por toda parte. Limpando os mapeamentos terá sobras em todos os lugares. A limpeza dos mapeamentos não é case sensitive e afeta todas as configurações LDAP! Nunca limpe os mapeamentos em um ambiente de produção, somente em um teste ou estágio experimental.", "Clear Username-LDAP User Mapping" : "Limpar Mapeamento de Usuário username-LDAP", "Clear Groupname-LDAP Group Mapping" : "Limpar Mapeamento do Grupo groupname-LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O espaço reservado ID %u está faltando. Ele será substituído pelo nome de login ao consultar LDAP / AD.", + "Verify settings and count groups" : "Verificar as configurações e grupos de conta", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir o login com o nome de usuário LDAP / AD, que é ou UID ou samaccountname e será detectado.", + "Add a new and blank configuration" : "Adiciona uma configuração nova em branco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Você pode omitir o protocolo, exceto quando o SSL é requerido. Então inicie com ldaps://", "in bytes" : "em bytes" },"pluralForm" :"nplurals=2; plural=(n > 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/pt_PT.js b/apps/user_ldap/l10n/pt_PT.js index 18c97b89d13..8d43c111023 100644 --- a/apps/user_ldap/l10n/pt_PT.js +++ b/apps/user_ldap/l10n/pt_PT.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "ocorreu um erro não especificado. Por favor, verifique as configurações e o registo.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "O filtro de procura é inválido, provavelmente devido a problemas de sintaxe. Verifique se existem números ímpares de parêntisis abertos e/ou fechados. Por favor reveja.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Ocorreu um erro de conexão ao servidor LDAP / AD. Por favor, reveja as definições de endereço, porto e credenciais.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O campo %uid está em falta. Este será substituído pelo utilizador do ownCloud quando for efectuado o pedido ao LDAP / AD.", "Please provide a login name to test against" : "Por favor, indique um nome de sessão para testar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Uma vez que o servidor LDAP / AD não suporta a propriedade \"memberOf\" (grupos) a caixa de grupos foi desactivada.", "_%s group found_::_%s groups found_" : ["%s grupo encontrado","%s grupos encontrados"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "Modificar pedido LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "O filtro especifica quais grupos LDAP devem ter acesso à instância %s.", - "Verify settings and count groups" : "Verificar condições e contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Quando entrar no sistema, %s irá encontrar o utilizador baseando-se nos seguintes atributos:", "LDAP / AD Username:" : "Nome de Utilizador LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir entrar no sistema com verificação LDAP / AD, do qual o utilizador poderá ser detectado a partir do \"uid\" ou \"samaccountname\".", "LDAP / AD Email Address:" : "Endereço de Correio Eletrónico LDPA / AD", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permtir entrar no sistema a partir do atributo \"email\". Neste caso os campos \"Mail\" e \"mailPrimaryAddress\" serão utilizados para verificação.", "Other Attributes:" : "Outros Atributos:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "Verificar definições", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor", - "Add a new and blank configuration" : "Adicione uma nova configuração em branco", "Copy current configuration into new directory binding" : "Copiar a configuração actual para um novo registo de conexão", "Delete the current configuration" : "Apagar a configuração actual", "Host" : "Anfitrião", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo, excepto se necessitar de SSL. Neste caso, comece com ldaps://", "Port" : "Porto", "Detect Port" : "Detetar porta", "User DN" : "DN do utilizador", @@ -155,6 +150,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "O ownCloud usa nomes de utilizadores para guardar e atribuir (meta) dados. Para identificar com precisão os utilizadores, cada utilizador de LDAP tem um nome de utilizador interno. Isto requer um mapeamento entre o utilizador LDAP e o utilizador ownCloud. Adicionalmente, o DN é colocado em cache para reduzir a interação com LDAP, porém não é usado para identificação. Se o DN muda, essas alterações serão vistas pelo ownCloud. O nome interno do ownCloud é usado em todo o lado, no ownCloud. Limpar os mapeamentos deixará vestígios em todo o lado. A limpeza dos mapeamentos não é sensível à configuração, pois afeta todas as configurações de LDAP! Nunca limpe os mapeamentos num ambiente de produção, apenas o faça numa fase de testes ou experimental.", "Clear Username-LDAP User Mapping" : "Limpar mapeamento do utilizador-LDAP", "Clear Groupname-LDAP Group Mapping" : "Limpar o mapeamento do nome de grupo LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O campo %uid está em falta. Este será substituído pelo utilizador do ownCloud quando for efectuado o pedido ao LDAP / AD.", + "Verify settings and count groups" : "Verificar condições e contar grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir entrar no sistema com verificação LDAP / AD, do qual o utilizador poderá ser detectado a partir do \"uid\" ou \"samaccountname\".", + "Add a new and blank configuration" : "Adicione uma nova configuração em branco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo, excepto se necessitar de SSL. Neste caso, comece com ldaps://", "in bytes" : "em bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/pt_PT.json b/apps/user_ldap/l10n/pt_PT.json index f5466a9b2be..00240c85eab 100644 --- a/apps/user_ldap/l10n/pt_PT.json +++ b/apps/user_ldap/l10n/pt_PT.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "ocorreu um erro não especificado. Por favor, verifique as configurações e o registo.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "O filtro de procura é inválido, provavelmente devido a problemas de sintaxe. Verifique se existem números ímpares de parêntisis abertos e/ou fechados. Por favor reveja.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Ocorreu um erro de conexão ao servidor LDAP / AD. Por favor, reveja as definições de endereço, porto e credenciais.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O campo %uid está em falta. Este será substituído pelo utilizador do ownCloud quando for efectuado o pedido ao LDAP / AD.", "Please provide a login name to test against" : "Por favor, indique um nome de sessão para testar", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Uma vez que o servidor LDAP / AD não suporta a propriedade \"memberOf\" (grupos) a caixa de grupos foi desactivada.", "_%s group found_::_%s groups found_" : ["%s grupo encontrado","%s grupos encontrados"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "Modificar pedido LDAP", "LDAP Filter:" : "Filtro LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "O filtro especifica quais grupos LDAP devem ter acesso à instância %s.", - "Verify settings and count groups" : "Verificar condições e contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Quando entrar no sistema, %s irá encontrar o utilizador baseando-se nos seguintes atributos:", "LDAP / AD Username:" : "Nome de Utilizador LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir entrar no sistema com verificação LDAP / AD, do qual o utilizador poderá ser detectado a partir do \"uid\" ou \"samaccountname\".", "LDAP / AD Email Address:" : "Endereço de Correio Eletrónico LDPA / AD", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Permtir entrar no sistema a partir do atributo \"email\". Neste caso os campos \"Mail\" e \"mailPrimaryAddress\" serão utilizados para verificação.", "Other Attributes:" : "Outros Atributos:", @@ -72,11 +69,9 @@ "Verify settings" : "Verificar definições", "1. Server" : "1. Servidor", "%s. Server:" : "%s. Servidor", - "Add a new and blank configuration" : "Adicione uma nova configuração em branco", "Copy current configuration into new directory binding" : "Copiar a configuração actual para um novo registo de conexão", "Delete the current configuration" : "Apagar a configuração actual", "Host" : "Anfitrião", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo, excepto se necessitar de SSL. Neste caso, comece com ldaps://", "Port" : "Porto", "Detect Port" : "Detetar porta", "User DN" : "DN do utilizador", @@ -153,6 +148,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "O ownCloud usa nomes de utilizadores para guardar e atribuir (meta) dados. Para identificar com precisão os utilizadores, cada utilizador de LDAP tem um nome de utilizador interno. Isto requer um mapeamento entre o utilizador LDAP e o utilizador ownCloud. Adicionalmente, o DN é colocado em cache para reduzir a interação com LDAP, porém não é usado para identificação. Se o DN muda, essas alterações serão vistas pelo ownCloud. O nome interno do ownCloud é usado em todo o lado, no ownCloud. Limpar os mapeamentos deixará vestígios em todo o lado. A limpeza dos mapeamentos não é sensível à configuração, pois afeta todas as configurações de LDAP! Nunca limpe os mapeamentos num ambiente de produção, apenas o faça numa fase de testes ou experimental.", "Clear Username-LDAP User Mapping" : "Limpar mapeamento do utilizador-LDAP", "Clear Groupname-LDAP Group Mapping" : "Limpar o mapeamento do nome de grupo LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "O campo %uid está em falta. Este será substituído pelo utilizador do ownCloud quando for efectuado o pedido ao LDAP / AD.", + "Verify settings and count groups" : "Verificar condições e contar grupos", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Permitir entrar no sistema com verificação LDAP / AD, do qual o utilizador poderá ser detectado a partir do \"uid\" ou \"samaccountname\".", + "Add a new and blank configuration" : "Adicione uma nova configuração em branco", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Pode omitir o protocolo, excepto se necessitar de SSL. Neste caso, comece com ldaps://", "in bytes" : "em bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/ru.js b/apps/user_ldap/l10n/ru.js index b7d9c4fd3d7..7f6c4a33cb9 100644 --- a/apps/user_ldap/l10n/ru.js +++ b/apps/user_ldap/l10n/ru.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Произошла неуказанная ошибка. Пожалуйста проверьте настройки и журнал.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Некорректный фильтр поиска, возможно из-за синтаксических проблем, таких как несоответствие открывающих и закрывающих скобок. Пожалуйста проверьте.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Произошла ошибка подключения к LDAP / AD, пожалуйста проверьте настройки подключения и учетные данные.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Отсутствует заполнитель %uid. Он будет заменен на логин при запросе к LDAP / AD.", "Please provide a login name to test against" : "Пожалуйста укажите логин для проверки", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Настройка групп была отключена, так как сервер LDAP / AD не поддерживает memberOf.", "Password change rejected. Hint: " : "Смена пароля отклонена. Подсказка:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "Изменить запрос LDAP", "LDAP Filter:" : "Фильтр LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Этот фильтр определяет какие LDAP группы должны иметь доступ к экземпляру %s.", - "Verify settings and count groups" : "Проверить настройки и пересчитать группы", "When logging in, %s will find the user based on the following attributes:" : "При входе, %s будет искать пользователя по следующим атрибутам:", "LDAP / AD Username:" : "Имя пользователя LDAP/AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Позволяет вход в LDAP / AD с помощью имени пользователя, которое может определяться как uid, так и samaccountname.", "LDAP / AD Email Address:" : "Адрес email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Позволяет вход с помощью адреса email. Будут разрешены Mail и mailPrimaryAddress.", "Other Attributes:" : "Другие атрибуты:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Проверить настройки", "1. Server" : "Сервер 1.", "%s. Server:" : "Сервер %s:", - "Add a new and blank configuration" : "Добавить новую и пустую конфигурацию", "Copy current configuration into new directory binding" : "Копировать текущую конфигурацию в новую связь с каталогом", "Delete the current configuration" : "Удалить текущую конфигурацию", "Host" : "Сервер", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можно пренебречь протоколом, за исключением использования SSL. В этом случае укажите ldaps://", "Port" : "Порт", "Detect Port" : "Определить порт", "User DN" : "DN пользователя", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "ownCloud использует имена пользователей для хранения и назначения метаданных. Для точной идентификации и распознавания пользователей, каждый пользователь LDAP будет иметь свое внутреннее имя пользователя. Это требует привязки имени пользователя ownCloud к пользователю LDAP. При создании имя пользователя назначается идентификатору UUID пользователя LDAP. Помимо этого кешируется DN для уменьшения числа обращений к LDAP, однако он не используется для идентификации. Если DN был изменён, то изменения будут найдены. Внутреннее имя ownCloud используется повсеместно в ownCloud. После сброса привязок в базе могут сохраниться остатки старой информации. Сброс привязок не привязан к конфигурации, он повлияет на все LDAP подключения! Ни в коем случае не рекомендуется сбрасывать привязки если система уже находится в эксплуатации, только на этапе тестирования.", "Clear Username-LDAP User Mapping" : "Очистить соответствия Имя-Пользователь LDAP", "Clear Groupname-LDAP Group Mapping" : "Очистить соответствия Группа-Группа LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Отсутствует заполнитель %uid. Он будет заменен на логин при запросе к LDAP / AD.", + "Verify settings and count groups" : "Проверить настройки и пересчитать группы", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Позволяет вход в LDAP / AD с помощью имени пользователя, которое может определяться как uid, так и samaccountname.", + "Add a new and blank configuration" : "Добавить новую и пустую конфигурацию", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можно пренебречь протоколом, за исключением использования SSL. В этом случае укажите ldaps://", "in bytes" : "в байтах" }, "nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);"); diff --git a/apps/user_ldap/l10n/ru.json b/apps/user_ldap/l10n/ru.json index 02dfe0b2a10..99ec6e9618d 100644 --- a/apps/user_ldap/l10n/ru.json +++ b/apps/user_ldap/l10n/ru.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Произошла неуказанная ошибка. Пожалуйста проверьте настройки и журнал.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Некорректный фильтр поиска, возможно из-за синтаксических проблем, таких как несоответствие открывающих и закрывающих скобок. Пожалуйста проверьте.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Произошла ошибка подключения к LDAP / AD, пожалуйста проверьте настройки подключения и учетные данные.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Отсутствует заполнитель %uid. Он будет заменен на логин при запросе к LDAP / AD.", "Please provide a login name to test against" : "Пожалуйста укажите логин для проверки", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Настройка групп была отключена, так как сервер LDAP / AD не поддерживает memberOf.", "Password change rejected. Hint: " : "Смена пароля отклонена. Подсказка:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "Изменить запрос LDAP", "LDAP Filter:" : "Фильтр LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Этот фильтр определяет какие LDAP группы должны иметь доступ к экземпляру %s.", - "Verify settings and count groups" : "Проверить настройки и пересчитать группы", "When logging in, %s will find the user based on the following attributes:" : "При входе, %s будет искать пользователя по следующим атрибутам:", "LDAP / AD Username:" : "Имя пользователя LDAP/AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Позволяет вход в LDAP / AD с помощью имени пользователя, которое может определяться как uid, так и samaccountname.", "LDAP / AD Email Address:" : "Адрес email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Позволяет вход с помощью адреса email. Будут разрешены Mail и mailPrimaryAddress.", "Other Attributes:" : "Другие атрибуты:", @@ -75,11 +72,9 @@ "Verify settings" : "Проверить настройки", "1. Server" : "Сервер 1.", "%s. Server:" : "Сервер %s:", - "Add a new and blank configuration" : "Добавить новую и пустую конфигурацию", "Copy current configuration into new directory binding" : "Копировать текущую конфигурацию в новую связь с каталогом", "Delete the current configuration" : "Удалить текущую конфигурацию", "Host" : "Сервер", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можно пренебречь протоколом, за исключением использования SSL. В этом случае укажите ldaps://", "Port" : "Порт", "Detect Port" : "Определить порт", "User DN" : "DN пользователя", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "ownCloud использует имена пользователей для хранения и назначения метаданных. Для точной идентификации и распознавания пользователей, каждый пользователь LDAP будет иметь свое внутреннее имя пользователя. Это требует привязки имени пользователя ownCloud к пользователю LDAP. При создании имя пользователя назначается идентификатору UUID пользователя LDAP. Помимо этого кешируется DN для уменьшения числа обращений к LDAP, однако он не используется для идентификации. Если DN был изменён, то изменения будут найдены. Внутреннее имя ownCloud используется повсеместно в ownCloud. После сброса привязок в базе могут сохраниться остатки старой информации. Сброс привязок не привязан к конфигурации, он повлияет на все LDAP подключения! Ни в коем случае не рекомендуется сбрасывать привязки если система уже находится в эксплуатации, только на этапе тестирования.", "Clear Username-LDAP User Mapping" : "Очистить соответствия Имя-Пользователь LDAP", "Clear Groupname-LDAP Group Mapping" : "Очистить соответствия Группа-Группа LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Отсутствует заполнитель %uid. Он будет заменен на логин при запросе к LDAP / AD.", + "Verify settings and count groups" : "Проверить настройки и пересчитать группы", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Позволяет вход в LDAP / AD с помощью имени пользователя, которое может определяться как uid, так и samaccountname.", + "Add a new and blank configuration" : "Добавить новую и пустую конфигурацию", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можно пренебречь протоколом, за исключением использования SSL. В этом случае укажите ldaps://", "in bytes" : "в байтах" },"pluralForm" :"nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/sk.js b/apps/user_ldap/l10n/sk.js index fb2728f1831..c2051869ae0 100644 --- a/apps/user_ldap/l10n/sk.js +++ b/apps/user_ldap/l10n/sk.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Nastala nešpecifikovaná chyba. Overte nastavenia a súbor logu.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filter vyhľadávania je neplatný, pravdepodobne je chybný syntax, napr. neuzatvorené zátvorky. Overte si to.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Nastala chyba pri pripojení k LDAP / AD, skontrolujte položky host, port a prihlasovacie údaje.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chýba zástupný znak %uid. Bude nahradený prihlasovacím menom pri požiadavke do LDAP / AD.", "Please provide a login name to test against" : "Zadajte prihlasovacie meno na otestovanie", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Pole skupín bolo vypnuté, pretože LDAP / AD server nepodporuje memberOf.", "Password change rejected. Hint: " : "Zmena hesla zamietnutá. Vodítko:", @@ -64,10 +63,8 @@ OC.L10N.register( "Edit LDAP Query" : "Upraviť LDAP požiadavku", "LDAP Filter:" : "LDAP filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Tento filter LDAP určuje, ktoré skupiny budú mať prístup k %s inštancii.", - "Verify settings and count groups" : "Overiť nastavenia a spočítať skupiny", "When logging in, %s will find the user based on the following attributes:" : "Pri prihlasovaní, %s bude vyhľadávať používateľov na základe týchto atribútov:", "LDAP / AD Username:" : "Používateľské meno LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Povoliť prihlásenie prostredníctvom LDAP / AD používateľského mena, ktoré má zadanú hodnotu v atribútoch uid alebo samaccountname.", "LDAP / AD Email Address:" : "LDAP / AD emailová adresa:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Povoliť prihlásenie prostredníctvom emailu. Povolené atribúty sú Mail a mailPrimaryAddress.", "Other Attributes:" : "Iné atribúty:", @@ -76,11 +73,9 @@ OC.L10N.register( "Verify settings" : "Overiť nastavenia", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Pridať novú prázdnu konfiguráciu", "Copy current configuration into new directory binding" : "Skopírovať súčasnú konfiguráciu do nového adresárového pripojenia", "Delete the current configuration" : "Vymazať súčasnú konfiguráciu", "Host" : "Hostiteľ", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Môžete vynechať protokol, okrem prípadu, kedy sa vyžaduje SSL. Vtedy začnite s ldaps://", "Port" : "Port", "Detect Port" : "Detekovať port", "User DN" : "Používateľské DN", @@ -153,6 +148,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Používateľské mená sa používajú na uchovávanie a priraďovanie (meta)dát. Každý používateľ v LDAP bude mať interné používateľské meno, aby bolo možné správne identifikovať a rozpoznávať používateľov. To je vyžaduje vytvorenie mapovania používateľských mien na používateľov v LDAPe. Vytvorené používateľské meno sa namapuje na UUID používateľa v LDAPe. Naviac je sa vo vyrovnávacej pamäti udržiava DN, aby sa obmedzila nadmerná interakcia s LDAPom, ale to sa nepoužíva na identifikáciu. Ak sa DN zmení, zmena bude správne rozpoznaná. Interné používateľské meno sa používa všade. Vyčistenie mapovaní vymaže zvyšky všade. Vyčistenie mapovaní naviac nie je špecifické pre určitú konfiguráciu; bude mať vplyv na všetky konfigurácie LDAPu! Nikdy nečistite mapovanie v produkčnom prostredí, len v testovacej alebo experimentálnej fáze.", "Clear Username-LDAP User Mapping" : "Zrušiť mapovanie LDAP používateľských mien", "Clear Groupname-LDAP Group Mapping" : "Zrušiť mapovanie názvov LDAP skupín", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chýba zástupný znak %uid. Bude nahradený prihlasovacím menom pri požiadavke do LDAP / AD.", + "Verify settings and count groups" : "Overiť nastavenia a spočítať skupiny", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Povoliť prihlásenie prostredníctvom LDAP / AD používateľského mena, ktoré má zadanú hodnotu v atribútoch uid alebo samaccountname.", + "Add a new and blank configuration" : "Pridať novú prázdnu konfiguráciu", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Môžete vynechať protokol, okrem prípadu, kedy sa vyžaduje SSL. Vtedy začnite s ldaps://", "in bytes" : "v bajtoch" }, "nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;"); diff --git a/apps/user_ldap/l10n/sk.json b/apps/user_ldap/l10n/sk.json index b66d98e2a19..4c9625192b4 100644 --- a/apps/user_ldap/l10n/sk.json +++ b/apps/user_ldap/l10n/sk.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Nastala nešpecifikovaná chyba. Overte nastavenia a súbor logu.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filter vyhľadávania je neplatný, pravdepodobne je chybný syntax, napr. neuzatvorené zátvorky. Overte si to.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Nastala chyba pri pripojení k LDAP / AD, skontrolujte položky host, port a prihlasovacie údaje.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chýba zástupný znak %uid. Bude nahradený prihlasovacím menom pri požiadavke do LDAP / AD.", "Please provide a login name to test against" : "Zadajte prihlasovacie meno na otestovanie", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Pole skupín bolo vypnuté, pretože LDAP / AD server nepodporuje memberOf.", "Password change rejected. Hint: " : "Zmena hesla zamietnutá. Vodítko:", @@ -62,10 +61,8 @@ "Edit LDAP Query" : "Upraviť LDAP požiadavku", "LDAP Filter:" : "LDAP filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Tento filter LDAP určuje, ktoré skupiny budú mať prístup k %s inštancii.", - "Verify settings and count groups" : "Overiť nastavenia a spočítať skupiny", "When logging in, %s will find the user based on the following attributes:" : "Pri prihlasovaní, %s bude vyhľadávať používateľov na základe týchto atribútov:", "LDAP / AD Username:" : "Používateľské meno LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Povoliť prihlásenie prostredníctvom LDAP / AD používateľského mena, ktoré má zadanú hodnotu v atribútoch uid alebo samaccountname.", "LDAP / AD Email Address:" : "LDAP / AD emailová adresa:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Povoliť prihlásenie prostredníctvom emailu. Povolené atribúty sú Mail a mailPrimaryAddress.", "Other Attributes:" : "Iné atribúty:", @@ -74,11 +71,9 @@ "Verify settings" : "Overiť nastavenia", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Pridať novú prázdnu konfiguráciu", "Copy current configuration into new directory binding" : "Skopírovať súčasnú konfiguráciu do nového adresárového pripojenia", "Delete the current configuration" : "Vymazať súčasnú konfiguráciu", "Host" : "Hostiteľ", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Môžete vynechať protokol, okrem prípadu, kedy sa vyžaduje SSL. Vtedy začnite s ldaps://", "Port" : "Port", "Detect Port" : "Detekovať port", "User DN" : "Používateľské DN", @@ -151,6 +146,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Používateľské mená sa používajú na uchovávanie a priraďovanie (meta)dát. Každý používateľ v LDAP bude mať interné používateľské meno, aby bolo možné správne identifikovať a rozpoznávať používateľov. To je vyžaduje vytvorenie mapovania používateľských mien na používateľov v LDAPe. Vytvorené používateľské meno sa namapuje na UUID používateľa v LDAPe. Naviac je sa vo vyrovnávacej pamäti udržiava DN, aby sa obmedzila nadmerná interakcia s LDAPom, ale to sa nepoužíva na identifikáciu. Ak sa DN zmení, zmena bude správne rozpoznaná. Interné používateľské meno sa používa všade. Vyčistenie mapovaní vymaže zvyšky všade. Vyčistenie mapovaní naviac nie je špecifické pre určitú konfiguráciu; bude mať vplyv na všetky konfigurácie LDAPu! Nikdy nečistite mapovanie v produkčnom prostredí, len v testovacej alebo experimentálnej fáze.", "Clear Username-LDAP User Mapping" : "Zrušiť mapovanie LDAP používateľských mien", "Clear Groupname-LDAP Group Mapping" : "Zrušiť mapovanie názvov LDAP skupín", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Chýba zástupný znak %uid. Bude nahradený prihlasovacím menom pri požiadavke do LDAP / AD.", + "Verify settings and count groups" : "Overiť nastavenia a spočítať skupiny", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Povoliť prihlásenie prostredníctvom LDAP / AD používateľského mena, ktoré má zadanú hodnotu v atribútoch uid alebo samaccountname.", + "Add a new and blank configuration" : "Pridať novú prázdnu konfiguráciu", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Môžete vynechať protokol, okrem prípadu, kedy sa vyžaduje SSL. Vtedy začnite s ldaps://", "in bytes" : "v bajtoch" },"pluralForm" :"nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/sl.js b/apps/user_ldap/l10n/sl.js index e9838978794..3dc143cc05c 100644 --- a/apps/user_ldap/l10n/sl.js +++ b/apps/user_ldap/l10n/sl.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Prišlo je do nedoločene napake. Preveriti je treba dnevnik in nastavitve.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filter iskanja ni veljaven. Najverjetneje je to zaradi napake skladnje, kot je neustrezno ali neskladno uporabljen oklepaj. Preverite vpis.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Prišlo je do napake povezave z LDAP / AD. Preverite podatke o gostitelju, vratih in poverilih.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manjka držalo %uid. Zamenjano bo z uporabniškim imenom pri poizvedbah LDAP / AD.", "Please provide a login name to test against" : "Vpisati je treba uporabniško ime za preizkus", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Skupina je onemogočena, ker na strežniku ni omogočena podpora atributu memberOf.", "_%s group found_::_%s groups found_" : ["%s najdena skupina","%s najdeni skupini","%s najdene skupine","%s najdenih skupin"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "Uredi poizvedbo LDAP", "LDAP Filter:" : "Filter LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filter določa, katere skupine LDAP bodo imele dostop do %s.", - "Verify settings and count groups" : "Preveri nastavitve in preštej skupine", "When logging in, %s will find the user based on the following attributes:" : "Pri prijavi bodo prek %s najdeni uporabniki na osnovi navedenih atributov:", "LDAP / AD Username:" : "Uporabniško ime LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Omogoča prijavo prek LDAP / AD, ki je ali UID ali ime računa, ki bo zaznano.", "LDAP / AD Email Address:" : "Elektronski naslov LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Dovoli prijavo z atributom elektronskega naslova. Dovoljena bosta naslova Mail and mailPrimaryAddress.", "Other Attributes:" : "Drugi atributi:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "Preveri nastavitve", "1. Server" : "1. strežnik", "%s. Server:" : "%s. strežnik:", - "Add a new and blank configuration" : "In nova, privzeta nastavitev", "Copy current configuration into new directory binding" : "Kopiraj trenutne nastavitve v vezi nove mape.", "Delete the current configuration" : "Izbriši trenutne nastavitve", "Host" : "Gostitelj", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokol je lahko izpuščen, če ni posebej zahtevan SSL. V tem primeru se mora naslov začeti z ldaps://", "Port" : "Vrata", "Detect Port" : "Zaznaj vrata", "User DN" : "Uporabnikovo enolično ime", @@ -151,6 +146,11 @@ OC.L10N.register( "Username-LDAP User Mapping" : "Uporabniška preslikava uporabniškega imena na LDAP", "Clear Username-LDAP User Mapping" : "Izbriši preslikavo uporabniškega imena na LDAP", "Clear Groupname-LDAP Group Mapping" : "Izbriši preslikavo skupine na LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manjka držalo %uid. Zamenjano bo z uporabniškim imenom pri poizvedbah LDAP / AD.", + "Verify settings and count groups" : "Preveri nastavitve in preštej skupine", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Omogoča prijavo prek LDAP / AD, ki je ali UID ali ime računa, ki bo zaznano.", + "Add a new and blank configuration" : "In nova, privzeta nastavitev", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokol je lahko izpuščen, če ni posebej zahtevan SSL. V tem primeru se mora naslov začeti z ldaps://", "in bytes" : "v bajtih" }, "nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n%100==4 ? 2 : 3);"); diff --git a/apps/user_ldap/l10n/sl.json b/apps/user_ldap/l10n/sl.json index da2cdf3906f..8da7b06c004 100644 --- a/apps/user_ldap/l10n/sl.json +++ b/apps/user_ldap/l10n/sl.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Prišlo je do nedoločene napake. Preveriti je treba dnevnik in nastavitve.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filter iskanja ni veljaven. Najverjetneje je to zaradi napake skladnje, kot je neustrezno ali neskladno uporabljen oklepaj. Preverite vpis.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Prišlo je do napake povezave z LDAP / AD. Preverite podatke o gostitelju, vratih in poverilih.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manjka držalo %uid. Zamenjano bo z uporabniškim imenom pri poizvedbah LDAP / AD.", "Please provide a login name to test against" : "Vpisati je treba uporabniško ime za preizkus", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Skupina je onemogočena, ker na strežniku ni omogočena podpora atributu memberOf.", "_%s group found_::_%s groups found_" : ["%s najdena skupina","%s najdeni skupini","%s najdene skupine","%s najdenih skupin"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "Uredi poizvedbo LDAP", "LDAP Filter:" : "Filter LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filter določa, katere skupine LDAP bodo imele dostop do %s.", - "Verify settings and count groups" : "Preveri nastavitve in preštej skupine", "When logging in, %s will find the user based on the following attributes:" : "Pri prijavi bodo prek %s najdeni uporabniki na osnovi navedenih atributov:", "LDAP / AD Username:" : "Uporabniško ime LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Omogoča prijavo prek LDAP / AD, ki je ali UID ali ime računa, ki bo zaznano.", "LDAP / AD Email Address:" : "Elektronski naslov LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Dovoli prijavo z atributom elektronskega naslova. Dovoljena bosta naslova Mail and mailPrimaryAddress.", "Other Attributes:" : "Drugi atributi:", @@ -72,11 +69,9 @@ "Verify settings" : "Preveri nastavitve", "1. Server" : "1. strežnik", "%s. Server:" : "%s. strežnik:", - "Add a new and blank configuration" : "In nova, privzeta nastavitev", "Copy current configuration into new directory binding" : "Kopiraj trenutne nastavitve v vezi nove mape.", "Delete the current configuration" : "Izbriši trenutne nastavitve", "Host" : "Gostitelj", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokol je lahko izpuščen, če ni posebej zahtevan SSL. V tem primeru se mora naslov začeti z ldaps://", "Port" : "Vrata", "Detect Port" : "Zaznaj vrata", "User DN" : "Uporabnikovo enolično ime", @@ -149,6 +144,11 @@ "Username-LDAP User Mapping" : "Uporabniška preslikava uporabniškega imena na LDAP", "Clear Username-LDAP User Mapping" : "Izbriši preslikavo uporabniškega imena na LDAP", "Clear Groupname-LDAP Group Mapping" : "Izbriši preslikavo skupine na LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Manjka držalo %uid. Zamenjano bo z uporabniškim imenom pri poizvedbah LDAP / AD.", + "Verify settings and count groups" : "Preveri nastavitve in preštej skupine", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Omogoča prijavo prek LDAP / AD, ki je ali UID ali ime računa, ki bo zaznano.", + "Add a new and blank configuration" : "In nova, privzeta nastavitev", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokol je lahko izpuščen, če ni posebej zahtevan SSL. V tem primeru se mora naslov začeti z ldaps://", "in bytes" : "v bajtih" },"pluralForm" :"nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || n%100==4 ? 2 : 3);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/sq.js b/apps/user_ldap/l10n/sq.js index b183f967719..dda76f5dd27 100644 --- a/apps/user_ldap/l10n/sq.js +++ b/apps/user_ldap/l10n/sq.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Ndodhi një gabim i papërcaktuar. Ju lutemi, kontrolloni rregullimet dhe regjistrin.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filtri i kërkimit është i pavlefshëm, ndoshta për shkak problemesh sintakse, të tillë si një numër jo i njëjtë kllpash të hapura dhe mbyllura. Ju lutemi, rishikojeni.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Ndodhi një gabim lidhje te LDAP / AD, ju lutemi, kontrolloni strehën, portën dhe kredencialet.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Vendmbajtësja %uid mungon. Do të zëvendësohet me emrin e hyrjes, kur të kërkohet te LDAP / AD.", "Please provide a login name to test against" : "Ju lutemi, jepni një emër hyrjesh që të ritestohet", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Kutia e grupeve u çaktivizua, ngaqë shërbyesi LDAP / AD nuk mbulon memberOf.", "LDAP / AD integration" : "Integrimi LDAP / AD", @@ -63,10 +62,8 @@ OC.L10N.register( "Edit LDAP Query" : "Përpunoni Kërkesë LDAP", "LDAP Filter:" : "Filtër LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtri përcakton se cilët grupe LDAP do të kenë hyrje te instanca %s.", - "Verify settings and count groups" : "Verifiko rregullimet dhe numëro grupet", "When logging in, %s will find the user based on the following attributes:" : "Kur hyhet, %s do ta gjejë përdoruesin duke u bazuar në atributet vijues:", "LDAP / AD Username:" : "Emër përdoruesi LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Lejon hyrje kundrejt emrin të përdoruesit LDAP / AD, që është ose uid, ose samaccountname, dhe do të zbulohet.", "LDAP / AD Email Address:" : "Adresë Email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Lejon hyrje kundrejt një atributi email. Do të lejohen Mail dhe mailPrimaryAddress.", "Other Attributes:" : "Atribute të Tjerë:", @@ -75,11 +72,9 @@ OC.L10N.register( "Verify settings" : "Verifikoni rregullimet", "1. Server" : "1. Shërbyes", "%s. Server:" : "%s. Shërbyes:", - "Add a new and blank configuration" : "Shtoni një formësim të ri të zbrazët", "Copy current configuration into new directory binding" : "Kopjojeni formësimin e tanishëm te një lidhmë e re drejtorie", "Delete the current configuration" : "Fshije formësimin e tanishëm", "Host" : "Strehë", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokollin mund ta lini pa vënë, hiq rastin kur ju duhet SSL. Në atë rast filloni me ldaps://", "Port" : "Portë", "Detect Port" : "Zbulo Portë", "User DN" : "DN Përdoruesi", @@ -157,6 +152,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Emrat e përdoruesve përdoren për të depozituar dhe shpërndarë (tej) të dhëna. Që të mund të identifikohen dhe pranohen saktësisht përdoruesit, çdo përdorues LDAP do të ketë një emër të brendshëm përdoruesi. Kjo kërkon përshoqërim nga emër përdoruesi te përdorues LDAP. Emri i përdoruesit i krijuar i përshoqërohet UUID-së së përdoruesit LDAP. Tej kësaj, edhe DN-ja ruhet në fshehtinë, për të zvogëluar ndërveprim LDAP, por s’përdoret për identifikim. Nëse ndryshon DN-ja, ndryshimet do të gjenden. Emri i brendshëm i përdoruesi përdoret gjithandej. Heqja e përshoqërimeve do të lërë thërrime ngado. Heqja e përshoqërimeve nuk preket nga formësimi, prek krejt formësimet për LDAP-në! Mos i hiqni kurrë përshoqërimet në një mjedis prodhimi, vetëm në një faqë testimi ose eksperimetale.", "Clear Username-LDAP User Mapping" : "Pastro Përshoqërimin Emër përdoruesi-Përdorues LDAP", "Clear Groupname-LDAP Group Mapping" : "Pastro Përshoqërimin Emër grupi-Grup LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Vendmbajtësja %uid mungon. Do të zëvendësohet me emrin e hyrjes, kur të kërkohet te LDAP / AD.", + "Verify settings and count groups" : "Verifiko rregullimet dhe numëro grupet", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Lejon hyrje kundrejt emrin të përdoruesit LDAP / AD, që është ose uid, ose samaccountname, dhe do të zbulohet.", + "Add a new and blank configuration" : "Shtoni një formësim të ri të zbrazët", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokollin mund ta lini pa vënë, hiq rastin kur ju duhet SSL. Në atë rast filloni me ldaps://", "in bytes" : "në bajte" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/sq.json b/apps/user_ldap/l10n/sq.json index 57955ac272e..44c0fac0c9a 100644 --- a/apps/user_ldap/l10n/sq.json +++ b/apps/user_ldap/l10n/sq.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Ndodhi një gabim i papërcaktuar. Ju lutemi, kontrolloni rregullimet dhe regjistrin.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Filtri i kërkimit është i pavlefshëm, ndoshta për shkak problemesh sintakse, të tillë si një numër jo i njëjtë kllpash të hapura dhe mbyllura. Ju lutemi, rishikojeni.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Ndodhi një gabim lidhje te LDAP / AD, ju lutemi, kontrolloni strehën, portën dhe kredencialet.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Vendmbajtësja %uid mungon. Do të zëvendësohet me emrin e hyrjes, kur të kërkohet te LDAP / AD.", "Please provide a login name to test against" : "Ju lutemi, jepni një emër hyrjesh që të ritestohet", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Kutia e grupeve u çaktivizua, ngaqë shërbyesi LDAP / AD nuk mbulon memberOf.", "LDAP / AD integration" : "Integrimi LDAP / AD", @@ -61,10 +60,8 @@ "Edit LDAP Query" : "Përpunoni Kërkesë LDAP", "LDAP Filter:" : "Filtër LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtri përcakton se cilët grupe LDAP do të kenë hyrje te instanca %s.", - "Verify settings and count groups" : "Verifiko rregullimet dhe numëro grupet", "When logging in, %s will find the user based on the following attributes:" : "Kur hyhet, %s do ta gjejë përdoruesin duke u bazuar në atributet vijues:", "LDAP / AD Username:" : "Emër përdoruesi LDAP / AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Lejon hyrje kundrejt emrin të përdoruesit LDAP / AD, që është ose uid, ose samaccountname, dhe do të zbulohet.", "LDAP / AD Email Address:" : "Adresë Email LDAP / AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Lejon hyrje kundrejt një atributi email. Do të lejohen Mail dhe mailPrimaryAddress.", "Other Attributes:" : "Atribute të Tjerë:", @@ -73,11 +70,9 @@ "Verify settings" : "Verifikoni rregullimet", "1. Server" : "1. Shërbyes", "%s. Server:" : "%s. Shërbyes:", - "Add a new and blank configuration" : "Shtoni një formësim të ri të zbrazët", "Copy current configuration into new directory binding" : "Kopjojeni formësimin e tanishëm te një lidhmë e re drejtorie", "Delete the current configuration" : "Fshije formësimin e tanishëm", "Host" : "Strehë", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokollin mund ta lini pa vënë, hiq rastin kur ju duhet SSL. Në atë rast filloni me ldaps://", "Port" : "Portë", "Detect Port" : "Zbulo Portë", "User DN" : "DN Përdoruesi", @@ -155,6 +150,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Emrat e përdoruesve përdoren për të depozituar dhe shpërndarë (tej) të dhëna. Që të mund të identifikohen dhe pranohen saktësisht përdoruesit, çdo përdorues LDAP do të ketë një emër të brendshëm përdoruesi. Kjo kërkon përshoqërim nga emër përdoruesi te përdorues LDAP. Emri i përdoruesit i krijuar i përshoqërohet UUID-së së përdoruesit LDAP. Tej kësaj, edhe DN-ja ruhet në fshehtinë, për të zvogëluar ndërveprim LDAP, por s’përdoret për identifikim. Nëse ndryshon DN-ja, ndryshimet do të gjenden. Emri i brendshëm i përdoruesi përdoret gjithandej. Heqja e përshoqërimeve do të lërë thërrime ngado. Heqja e përshoqërimeve nuk preket nga formësimi, prek krejt formësimet për LDAP-në! Mos i hiqni kurrë përshoqërimet në një mjedis prodhimi, vetëm në një faqë testimi ose eksperimetale.", "Clear Username-LDAP User Mapping" : "Pastro Përshoqërimin Emër përdoruesi-Përdorues LDAP", "Clear Groupname-LDAP Group Mapping" : "Pastro Përshoqërimin Emër grupi-Grup LDAP", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Vendmbajtësja %uid mungon. Do të zëvendësohet me emrin e hyrjes, kur të kërkohet te LDAP / AD.", + "Verify settings and count groups" : "Verifiko rregullimet dhe numëro grupet", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Lejon hyrje kundrejt emrin të përdoruesit LDAP / AD, që është ose uid, ose samaccountname, dhe do të zbulohet.", + "Add a new and blank configuration" : "Shtoni një formësim të ri të zbrazët", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Protokollin mund ta lini pa vënë, hiq rastin kur ju duhet SSL. Në atë rast filloni me ldaps://", "in bytes" : "në bajte" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/sr.js b/apps/user_ldap/l10n/sr.js index 87efe90c71d..96289816b09 100644 --- a/apps/user_ldap/l10n/sr.js +++ b/apps/user_ldap/l10n/sr.js @@ -42,7 +42,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Десила се неодређана грешка. Проверите поставке и записник.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Филтер претраге је неисправан, вероватно због синтаксе попут неједнаког броја отворених и затворених заграда. Проверите.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Дошло је до грешке ЛДАП / АД везе. Проверите домаћина, порт и акредитиве.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Недостаје %uid местодржач. Биће замењен са пријавним именом при ЛДАП / АД упиту.", "Please provide a login name to test against" : "Наведите пријавно име за тест са", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Поље групе је искључено јер ЛДАП / АД сервер не подржава припадност групи.", "_%s group found_::_%s groups found_" : ["нађена %s група","нађене %s групе","нађено %s група"], @@ -61,10 +60,8 @@ OC.L10N.register( "Edit LDAP Query" : "Уреди ЛДАП упит", "LDAP Filter:" : "ЛДАП филтер:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Филтер прецизира које ће LDAP групе требају имати приступ %s случају.", - "Verify settings and count groups" : "Провери поставке и преброј групе", "When logging in, %s will find the user based on the following attributes:" : "При пријављивању, %s ће пронаћи корисника на основу следећих атрибута:", "LDAP / AD Username:" : "ЛДАП / АД корисничко име:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Дозволи пријаву уз ЛДАП / АД корисичко име које је или uid или samaccountname и биће откривено.", "LDAP / AD Email Address:" : "ЛДАП / АД е-адреса:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Дозволи пријаву уз атрибут е-поште. Mail и mailPrimaryAddress биће дозвољени.", "Other Attributes:" : "Остали параметри:", @@ -73,11 +70,9 @@ OC.L10N.register( "Verify settings" : "Провери поставке", "1. Server" : "1. сервер", "%s. Server:" : "%s. Сервер:", - "Add a new and blank configuration" : "Додај нову празну поставу", "Copy current configuration into new directory binding" : "Копирај тренутну поставу у везивање новог директоријума", "Delete the current configuration" : "Обриши тренутне поставке", "Host" : "Домаћин", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можете да изоставите протокол, осим ако захтевате ССЛ. У том случају почните са ldaps://", "Port" : "Порт", "Detect Port" : "Откриј порт", "User DN" : "Корисников DN", @@ -150,6 +145,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Корисничка имена се користи за чување и додељивање (мета) података. Да би се прецизно идентификовали и препознавали кориснике, сваки LDAP корисник ће имати локално корисничко име. Ово захтева мапирање од корисничког имена до LDAP корисника. Креирано корисничко име се мапира у UUID LDAP корисника. Поред тога, DN се кешира да смањи LDAP интеракцију, али се не користи за идентификацију. Ако се DN мења, промене се могу наћи. Локално корисничко име се користи свуда. Чишћење мапирања оставља свуда остатке. Чишћење мапирања није осетљиво на конфигурацију, оно утиче на све LDAP конфигурације! Никада не користит чишћење мапирања у радном окружењу, већ само у тестирању или експерименталној фази.", "Clear Username-LDAP User Mapping" : "Очисти Username-LDAP мапирање корисника", "Clear Groupname-LDAP Group Mapping" : "Очисти Groupname-LDAP мапирање група", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Недостаје %uid местодржач. Биће замењен са пријавним именом при ЛДАП / АД упиту.", + "Verify settings and count groups" : "Провери поставке и преброј групе", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Дозволи пријаву уз ЛДАП / АД корисичко име које је или uid или samaccountname и биће откривено.", + "Add a new and blank configuration" : "Додај нову празну поставу", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можете да изоставите протокол, осим ако захтевате ССЛ. У том случају почните са ldaps://", "in bytes" : "у бајтовима" }, "nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);"); diff --git a/apps/user_ldap/l10n/sr.json b/apps/user_ldap/l10n/sr.json index e5bbf3c134d..82b9e1d3302 100644 --- a/apps/user_ldap/l10n/sr.json +++ b/apps/user_ldap/l10n/sr.json @@ -40,7 +40,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Десила се неодређана грешка. Проверите поставке и записник.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Филтер претраге је неисправан, вероватно због синтаксе попут неједнаког броја отворених и затворених заграда. Проверите.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "Дошло је до грешке ЛДАП / АД везе. Проверите домаћина, порт и акредитиве.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Недостаје %uid местодржач. Биће замењен са пријавним именом при ЛДАП / АД упиту.", "Please provide a login name to test against" : "Наведите пријавно име за тест са", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "Поље групе је искључено јер ЛДАП / АД сервер не подржава припадност групи.", "_%s group found_::_%s groups found_" : ["нађена %s група","нађене %s групе","нађено %s група"], @@ -59,10 +58,8 @@ "Edit LDAP Query" : "Уреди ЛДАП упит", "LDAP Filter:" : "ЛДАП филтер:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Филтер прецизира које ће LDAP групе требају имати приступ %s случају.", - "Verify settings and count groups" : "Провери поставке и преброј групе", "When logging in, %s will find the user based on the following attributes:" : "При пријављивању, %s ће пронаћи корисника на основу следећих атрибута:", "LDAP / AD Username:" : "ЛДАП / АД корисничко име:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Дозволи пријаву уз ЛДАП / АД корисичко име које је или uid или samaccountname и биће откривено.", "LDAP / AD Email Address:" : "ЛДАП / АД е-адреса:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Дозволи пријаву уз атрибут е-поште. Mail и mailPrimaryAddress биће дозвољени.", "Other Attributes:" : "Остали параметри:", @@ -71,11 +68,9 @@ "Verify settings" : "Провери поставке", "1. Server" : "1. сервер", "%s. Server:" : "%s. Сервер:", - "Add a new and blank configuration" : "Додај нову празну поставу", "Copy current configuration into new directory binding" : "Копирај тренутну поставу у везивање новог директоријума", "Delete the current configuration" : "Обриши тренутне поставке", "Host" : "Домаћин", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можете да изоставите протокол, осим ако захтевате ССЛ. У том случају почните са ldaps://", "Port" : "Порт", "Detect Port" : "Откриј порт", "User DN" : "Корисников DN", @@ -148,6 +143,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Корисничка имена се користи за чување и додељивање (мета) података. Да би се прецизно идентификовали и препознавали кориснике, сваки LDAP корисник ће имати локално корисничко име. Ово захтева мапирање од корисничког имена до LDAP корисника. Креирано корисничко име се мапира у UUID LDAP корисника. Поред тога, DN се кешира да смањи LDAP интеракцију, али се не користи за идентификацију. Ако се DN мења, промене се могу наћи. Локално корисничко име се користи свуда. Чишћење мапирања оставља свуда остатке. Чишћење мапирања није осетљиво на конфигурацију, оно утиче на све LDAP конфигурације! Никада не користит чишћење мапирања у радном окружењу, већ само у тестирању или експерименталној фази.", "Clear Username-LDAP User Mapping" : "Очисти Username-LDAP мапирање корисника", "Clear Groupname-LDAP Group Mapping" : "Очисти Groupname-LDAP мапирање група", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "Недостаје %uid местодржач. Биће замењен са пријавним именом при ЛДАП / АД упиту.", + "Verify settings and count groups" : "Провери поставке и преброј групе", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Дозволи пријаву уз ЛДАП / АД корисичко име које је или uid или samaccountname и биће откривено.", + "Add a new and blank configuration" : "Додај нову празну поставу", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Можете да изоставите протокол, осим ако захтевате ССЛ. У том случају почните са ldaps://", "in bytes" : "у бајтовима" },"pluralForm" :"nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/sv.js b/apps/user_ldap/l10n/sv.js index f204c64fe21..db7e0b43939 100644 --- a/apps/user_ldap/l10n/sv.js +++ b/apps/user_ldap/l10n/sv.js @@ -61,7 +61,6 @@ OC.L10N.register( "Edit LDAP Query" : "Redigera LDAP förfrågan", "LDAP Filter:" : "LDAP Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtret specifierar vilka LDAD-grupper som ska ha åtkomst till %s instans", - "Verify settings and count groups" : "Verifiera inställningar och räkna grupper", "LDAP / AD Username:" : "LDAP / AD Användarnamn:", "LDAP / AD Email Address:" : "LDAP / AD E-postadress:", "Other Attributes:" : "Övriga attribut:", @@ -69,11 +68,9 @@ OC.L10N.register( "Verify settings" : "Verifiera inställningar", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Skapa en ny och tom konfiguration", "Copy current configuration into new directory binding" : "Kopiera nuvarande konfiguration till en ny katalogsammansättning", "Delete the current configuration" : "Radera nuvarande konfiguration", "Host" : "Server", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du behöver inte ange protokoll förutom om du använder SSL. Starta då med ldaps://", "Port" : "Port", "Detect Port" : "Upptäck Port", "User DN" : "Användar-DN", @@ -145,6 +142,9 @@ OC.L10N.register( "Username-LDAP User Mapping" : "Användarnamn-LDAP användarmappning", "Clear Username-LDAP User Mapping" : "Rensa användarnamn-LDAP användarmappning", "Clear Groupname-LDAP Group Mapping" : "Rensa gruppnamn-LDAP gruppmappning", + "Verify settings and count groups" : "Verifiera inställningar och räkna grupper", + "Add a new and blank configuration" : "Skapa en ny och tom konfiguration", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du behöver inte ange protokoll förutom om du använder SSL. Starta då med ldaps://", "in bytes" : "i bytes" }, "nplurals=2; plural=(n != 1);"); diff --git a/apps/user_ldap/l10n/sv.json b/apps/user_ldap/l10n/sv.json index 07a045e49ae..7895b4c7a6a 100644 --- a/apps/user_ldap/l10n/sv.json +++ b/apps/user_ldap/l10n/sv.json @@ -59,7 +59,6 @@ "Edit LDAP Query" : "Redigera LDAP förfrågan", "LDAP Filter:" : "LDAP Filter:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Filtret specifierar vilka LDAD-grupper som ska ha åtkomst till %s instans", - "Verify settings and count groups" : "Verifiera inställningar och räkna grupper", "LDAP / AD Username:" : "LDAP / AD Användarnamn:", "LDAP / AD Email Address:" : "LDAP / AD E-postadress:", "Other Attributes:" : "Övriga attribut:", @@ -67,11 +66,9 @@ "Verify settings" : "Verifiera inställningar", "1. Server" : "1. Server", "%s. Server:" : "%s. Server:", - "Add a new and blank configuration" : "Skapa en ny och tom konfiguration", "Copy current configuration into new directory binding" : "Kopiera nuvarande konfiguration till en ny katalogsammansättning", "Delete the current configuration" : "Radera nuvarande konfiguration", "Host" : "Server", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du behöver inte ange protokoll förutom om du använder SSL. Starta då med ldaps://", "Port" : "Port", "Detect Port" : "Upptäck Port", "User DN" : "Användar-DN", @@ -143,6 +140,9 @@ "Username-LDAP User Mapping" : "Användarnamn-LDAP användarmappning", "Clear Username-LDAP User Mapping" : "Rensa användarnamn-LDAP användarmappning", "Clear Groupname-LDAP Group Mapping" : "Rensa gruppnamn-LDAP gruppmappning", + "Verify settings and count groups" : "Verifiera inställningar och räkna grupper", + "Add a new and blank configuration" : "Skapa en ny och tom konfiguration", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Du behöver inte ange protokoll förutom om du använder SSL. Starta då med ldaps://", "in bytes" : "i bytes" },"pluralForm" :"nplurals=2; plural=(n != 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/th.js b/apps/user_ldap/l10n/th.js index ce833005290..4944aa179e1 100644 --- a/apps/user_ldap/l10n/th.js +++ b/apps/user_ldap/l10n/th.js @@ -43,7 +43,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "เกิดข้อผิดพลาดที่ระบุไม่ได้ กรุณาตรวจสอบการตั้งค่าและบันทึกของคุณ", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "ตัวกรองการค้นหาไม่ถูกต้องอาจเป็นเพราะปัญหาไวยากรณ์เช่นหมายเลขที่ไม่สม่ำเสมอของวงเล็บเปิดและปิด กรุณาแก้ไข", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "เกิดข้อผิดพลาดขณะเชื่อมต่อไปยัง LDAP/AD โปรดตรวจสอบโฮสต์พอร์ตและข้อมูลอื่นๆ", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "ตัวยึดตำแหน่ง %uid หายไป มันจะถูกแทนที่ด้วยชื่อที่ใช้ในการเข้าสู่ระบบเมื่อสอบถาม LDAP/AD", "Please provide a login name to test against" : "โปรดระบุชื่อที่ใช้ในการเข้าสู่ระบบเพื่อทดสอบข้อขัดแย้ง", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "กล่องข้อความกลุ่มถูกปิดการใช้งานเนื่องจากเซิร์ฟเวอร์ LDAP/AD ไม่สนับสนุน memberOf", "_%s group found_::_%s groups found_" : ["พบ %s กลุ่ม"], @@ -62,10 +61,8 @@ OC.L10N.register( "Edit LDAP Query" : "แก้ไข LDAP Query", "LDAP Filter:" : "ตัวกรอง LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "ระบุตัวกรองกลุ่ม LDAP ที่จะเข้าถึง %s", - "Verify settings and count groups" : "ตรวจสอบการตั้งค่าและจำนวนกลุ่มนับ", "When logging in, %s will find the user based on the following attributes:" : "เมื่อเข้าสู่ระบบ %s จะได้พบกับผู้ใช้ตามลักษณะดังต่อไปนี้:", "LDAP / AD Username:" : "ชื่อผู้ใช้ LDAP/AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "อนุญาตให้ผู้ใช้เข้าสู่ระบบ LDAP/AD ซึ่งเป็นทั้ง uid หรือ samAccountName และมันจะถูกตรวจพบ", "LDAP / AD Email Address:" : "ที่อยู่อีเมล LDAP/AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "อนุญาตให้เข้าสู่ระบบด้วยอีเมล Mail และ mailPrimaryAddress จะได้รับอนุญาต", "Other Attributes:" : "คุณลักษณะอื่นๆ:", @@ -74,11 +71,9 @@ OC.L10N.register( "Verify settings" : "ตรวจสอบการตั้งค่า", "1. Server" : "1. เซิร์ฟเวอร์", "%s. Server:" : "เซิร์ฟเวอร์%s", - "Add a new and blank configuration" : "เพิ่มใหม่และการกำหนดค่าว่าง", "Copy current configuration into new directory binding" : "คัดลอกการตั้งค่าปัจจุบันลงในไดเรกทอรีใหม่ที่ผูกกัน", "Delete the current configuration" : "ลบการตั้งค่าปัจจุบัน", "Host" : "โฮสต์", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "คุณสามารถปล่อยช่องโปรโตคอลเว้นไว้ได้, ยกเว้นกรณีที่คุณต้องการใช้ SSL จากนั้นเริ่มต้นด้วย ldaps://", "Port" : "พอร์ต", "Detect Port" : "ตรวจพบพอร์ต", "User DN" : "DN ของผู้ใช้งาน", @@ -152,6 +147,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "ชื่อผู้ใช้จะใช้ในการจัดเก็บและกำหนดข้อมูล (เมตา) เพื่อรู้จักกับผู้ใช้และสามารถระบุได้อย่างแม่นยำ แต่ละ LDAP จะมีชื่อผู้ใช้ภายใน จึงต้องทำ Mapping ให้กับผู้ใช้ LDAP ชื่อผู้ใช้ที่ถูกสร้างขึ้นจะถูกแมปเข้ากับ UUID ของผู้ใช้ LDAP นอกจากนี้ DN ก็จะถูกแคชเช่นกันเพื่อลดการทำงานร่วมกันของ LDAP แต่มันก็ไม่ได้ใช้เพื่อระบุตัวตน หากมีการเปลี่ยนแปลง DN การเปลี่ยนแปลงจะถูกพบในทันที ชื่อผู้ใช้ภายในจะถูกใช้กับทั้งหมด การล้างแมปไม่มีผลต่อการกำหนดค่า LDAP ทั้งหมด! \nและจะเกิดขึ้นเฉพาะในการทดสอบหรือขั้นตอนการทดลอง", "Clear Username-LDAP User Mapping" : "ล้าง Username-LDAP ผู้ใช้ Mapping", "Clear Groupname-LDAP Group Mapping" : "ล้าง Groupname-LDAP กลุ่ม Mapping", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "ตัวยึดตำแหน่ง %uid หายไป มันจะถูกแทนที่ด้วยชื่อที่ใช้ในการเข้าสู่ระบบเมื่อสอบถาม LDAP/AD", + "Verify settings and count groups" : "ตรวจสอบการตั้งค่าและจำนวนกลุ่มนับ", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "อนุญาตให้ผู้ใช้เข้าสู่ระบบ LDAP/AD ซึ่งเป็นทั้ง uid หรือ samAccountName และมันจะถูกตรวจพบ", + "Add a new and blank configuration" : "เพิ่มใหม่และการกำหนดค่าว่าง", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "คุณสามารถปล่อยช่องโปรโตคอลเว้นไว้ได้, ยกเว้นกรณีที่คุณต้องการใช้ SSL จากนั้นเริ่มต้นด้วย ldaps://", "in bytes" : "ในหน่วยไบต์" }, "nplurals=1; plural=0;"); diff --git a/apps/user_ldap/l10n/th.json b/apps/user_ldap/l10n/th.json index 9d1f40f8a02..234dd0c4646 100644 --- a/apps/user_ldap/l10n/th.json +++ b/apps/user_ldap/l10n/th.json @@ -41,7 +41,6 @@ "An unspecified error occurred. Please check the settings and the log." : "เกิดข้อผิดพลาดที่ระบุไม่ได้ กรุณาตรวจสอบการตั้งค่าและบันทึกของคุณ", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "ตัวกรองการค้นหาไม่ถูกต้องอาจเป็นเพราะปัญหาไวยากรณ์เช่นหมายเลขที่ไม่สม่ำเสมอของวงเล็บเปิดและปิด กรุณาแก้ไข", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "เกิดข้อผิดพลาดขณะเชื่อมต่อไปยัง LDAP/AD โปรดตรวจสอบโฮสต์พอร์ตและข้อมูลอื่นๆ", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "ตัวยึดตำแหน่ง %uid หายไป มันจะถูกแทนที่ด้วยชื่อที่ใช้ในการเข้าสู่ระบบเมื่อสอบถาม LDAP/AD", "Please provide a login name to test against" : "โปรดระบุชื่อที่ใช้ในการเข้าสู่ระบบเพื่อทดสอบข้อขัดแย้ง", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "กล่องข้อความกลุ่มถูกปิดการใช้งานเนื่องจากเซิร์ฟเวอร์ LDAP/AD ไม่สนับสนุน memberOf", "_%s group found_::_%s groups found_" : ["พบ %s กลุ่ม"], @@ -60,10 +59,8 @@ "Edit LDAP Query" : "แก้ไข LDAP Query", "LDAP Filter:" : "ตัวกรอง LDAP:", "The filter specifies which LDAP groups shall have access to the %s instance." : "ระบุตัวกรองกลุ่ม LDAP ที่จะเข้าถึง %s", - "Verify settings and count groups" : "ตรวจสอบการตั้งค่าและจำนวนกลุ่มนับ", "When logging in, %s will find the user based on the following attributes:" : "เมื่อเข้าสู่ระบบ %s จะได้พบกับผู้ใช้ตามลักษณะดังต่อไปนี้:", "LDAP / AD Username:" : "ชื่อผู้ใช้ LDAP/AD:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "อนุญาตให้ผู้ใช้เข้าสู่ระบบ LDAP/AD ซึ่งเป็นทั้ง uid หรือ samAccountName และมันจะถูกตรวจพบ", "LDAP / AD Email Address:" : "ที่อยู่อีเมล LDAP/AD:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "อนุญาตให้เข้าสู่ระบบด้วยอีเมล Mail และ mailPrimaryAddress จะได้รับอนุญาต", "Other Attributes:" : "คุณลักษณะอื่นๆ:", @@ -72,11 +69,9 @@ "Verify settings" : "ตรวจสอบการตั้งค่า", "1. Server" : "1. เซิร์ฟเวอร์", "%s. Server:" : "เซิร์ฟเวอร์%s", - "Add a new and blank configuration" : "เพิ่มใหม่และการกำหนดค่าว่าง", "Copy current configuration into new directory binding" : "คัดลอกการตั้งค่าปัจจุบันลงในไดเรกทอรีใหม่ที่ผูกกัน", "Delete the current configuration" : "ลบการตั้งค่าปัจจุบัน", "Host" : "โฮสต์", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "คุณสามารถปล่อยช่องโปรโตคอลเว้นไว้ได้, ยกเว้นกรณีที่คุณต้องการใช้ SSL จากนั้นเริ่มต้นด้วย ldaps://", "Port" : "พอร์ต", "Detect Port" : "ตรวจพบพอร์ต", "User DN" : "DN ของผู้ใช้งาน", @@ -150,6 +145,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "ชื่อผู้ใช้จะใช้ในการจัดเก็บและกำหนดข้อมูล (เมตา) เพื่อรู้จักกับผู้ใช้และสามารถระบุได้อย่างแม่นยำ แต่ละ LDAP จะมีชื่อผู้ใช้ภายใน จึงต้องทำ Mapping ให้กับผู้ใช้ LDAP ชื่อผู้ใช้ที่ถูกสร้างขึ้นจะถูกแมปเข้ากับ UUID ของผู้ใช้ LDAP นอกจากนี้ DN ก็จะถูกแคชเช่นกันเพื่อลดการทำงานร่วมกันของ LDAP แต่มันก็ไม่ได้ใช้เพื่อระบุตัวตน หากมีการเปลี่ยนแปลง DN การเปลี่ยนแปลงจะถูกพบในทันที ชื่อผู้ใช้ภายในจะถูกใช้กับทั้งหมด การล้างแมปไม่มีผลต่อการกำหนดค่า LDAP ทั้งหมด! \nและจะเกิดขึ้นเฉพาะในการทดสอบหรือขั้นตอนการทดลอง", "Clear Username-LDAP User Mapping" : "ล้าง Username-LDAP ผู้ใช้ Mapping", "Clear Groupname-LDAP Group Mapping" : "ล้าง Groupname-LDAP กลุ่ม Mapping", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "ตัวยึดตำแหน่ง %uid หายไป มันจะถูกแทนที่ด้วยชื่อที่ใช้ในการเข้าสู่ระบบเมื่อสอบถาม LDAP/AD", + "Verify settings and count groups" : "ตรวจสอบการตั้งค่าและจำนวนกลุ่มนับ", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "อนุญาตให้ผู้ใช้เข้าสู่ระบบ LDAP/AD ซึ่งเป็นทั้ง uid หรือ samAccountName และมันจะถูกตรวจพบ", + "Add a new and blank configuration" : "เพิ่มใหม่และการกำหนดค่าว่าง", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "คุณสามารถปล่อยช่องโปรโตคอลเว้นไว้ได้, ยกเว้นกรณีที่คุณต้องการใช้ SSL จากนั้นเริ่มต้นด้วย ldaps://", "in bytes" : "ในหน่วยไบต์" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/tr.js b/apps/user_ldap/l10n/tr.js index 6397b93c7d9..59990ab47e6 100644 --- a/apps/user_ldap/l10n/tr.js +++ b/apps/user_ldap/l10n/tr.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "Bilinmeyen bir sorun çıktı. Lütfen ayarları ve günlüğü denetleyin.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Arama süzgeci, açılmış ve kapatılmış parantez sayılarının eşit olmaması gibi bir söz dizimi sorunu nedeniyle geçersiz. Lütfen gözden geçirin.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP / AD için bir bağlantı sorunu çıktı. Lütfen istemci, kapı numarası ve kimlik doğrulama bilgilerini denetleyin.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "LDAP / AD sorgularında kullanıcı adı ile değiştirilecek %uid yer belirleyicisi eksik. ", "Please provide a login name to test against" : "Lütfen deneme için kullanılacak bir kullanıcı adı yazın", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "LDAP / AD sunucusu memberOf parametresini desteklemediğinden grup kutusu devre dışı.", "Password change rejected. Hint: " : "Parola değişimi reddedildi. İpucu:", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "LDAP Sorgusunu Düzenle", "LDAP Filter:" : "LDAP Süzgeci:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Süzgeçte %s kopyasına erişebilecek LDAP grupları belirtilir.", - "Verify settings and count groups" : "Ayarları doğrula ve grupları say", "When logging in, %s will find the user based on the following attributes:" : "Oturum açılırken, %s, aşağıdaki özniteliklere bağlı kullanıcıyı bulur:", "LDAP / AD Username:" : "LDAP / AD Kullanıcı Adı:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD kullanıcı adı ile oturum açılmasını sağlar. Kullanıcı adı uid ya da samaccountname olabilir ve algılanır.", "LDAP / AD Email Address:" : "LDAP / AD E-posta Adresi:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "E-posta adresi ile oturum açılmasını sağlar. Mail ve mailPrimaryAddress kullanılabilir.", "Other Attributes:" : "Diğer Öznitelikler:", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "Ayarları doğrula", "1. Server" : "1. Sunucu", "%s. Server:" : "%s. Sunucu:", - "Add a new and blank configuration" : "Yeni ve boş bir yapılandırma ekle", "Copy current configuration into new directory binding" : "Geçerli yapılandırmayı yeni dizin bağlamasına kopyala", "Delete the current configuration" : "Geçerli yapılandırmayı sil", "Host" : "Sunucu", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL gerekmiyorsa iletişim kuralı belirtilmeyebilir. Gerekiyorsa ldaps:// ile başlayın", "Port" : "Kapı Numarası", "Detect Port" : "Kapı Numarasını Algıla", "User DN" : "Kullanıcı DN", @@ -166,6 +161,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Kullanıcı adları, (üst) veri depolaması ve ataması için kullanılır. Kullanıcıları kesin olarak belirlemek ve algılamak için, her LDAP kullanıcısına bir iç kullanıcı verilir. Bu kullanıcı adı ile LDAP kullanıcısının eşleştirilmesi gerekir. Oluşturulan kullanıcı adı LDAP kullanıcısının UUID değeri ile eşleştirilir. Bunun yanında LDAP etkileşimini azaltmak için DN ön belleğe alınır ancak bu işlem kimlik belirleme için kullanılmaz. DN üzerinde yapılan değişiklikler aktarılır. İç kullanıcı her yerde kullanıldığından, bir eşleştirmeyi kaldırmak pek çok yerde kalıntılar bırakır. Eşleştirmeleri kaldırmak yalnız yapılandırmaya bağlı değildir, tüm LDAP yapılandırmalarını etkiler! Üretim ortamında eşleştirmeleri asla kaldırmayın, yalnız sınama ya da deney aşamalarında kullanın.", "Clear Username-LDAP User Mapping" : "Kullanıcı Adı-LDAP Kullanıcısı Eşleştirmesini Kaldır", "Clear Groupname-LDAP Group Mapping" : "Grup Adı-LDAP Grubu Eşleştirmesini Kaldır", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "LDAP / AD sorgularında kullanıcı adı ile değiştirilecek %uid yer belirleyicisi eksik. ", + "Verify settings and count groups" : "Ayarları doğrula ve grupları say", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD kullanıcı adı ile oturum açılmasını sağlar. Kullanıcı adı uid ya da samaccountname olabilir ve algılanır.", + "Add a new and blank configuration" : "Yeni ve boş bir yapılandırma ekle", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL gerekmiyorsa iletişim kuralı belirtilmeyebilir. Gerekiyorsa ldaps:// ile başlayın", "in bytes" : "bayt cinsinden" }, "nplurals=2; plural=(n > 1);"); diff --git a/apps/user_ldap/l10n/tr.json b/apps/user_ldap/l10n/tr.json index 28f60eedc38..7ff76f9f7df 100644 --- a/apps/user_ldap/l10n/tr.json +++ b/apps/user_ldap/l10n/tr.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "Bilinmeyen bir sorun çıktı. Lütfen ayarları ve günlüğü denetleyin.", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "Arama süzgeci, açılmış ve kapatılmış parantez sayılarının eşit olmaması gibi bir söz dizimi sorunu nedeniyle geçersiz. Lütfen gözden geçirin.", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP / AD için bir bağlantı sorunu çıktı. Lütfen istemci, kapı numarası ve kimlik doğrulama bilgilerini denetleyin.", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "LDAP / AD sorgularında kullanıcı adı ile değiştirilecek %uid yer belirleyicisi eksik. ", "Please provide a login name to test against" : "Lütfen deneme için kullanılacak bir kullanıcı adı yazın", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "LDAP / AD sunucusu memberOf parametresini desteklemediğinden grup kutusu devre dışı.", "Password change rejected. Hint: " : "Parola değişimi reddedildi. İpucu:", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "LDAP Sorgusunu Düzenle", "LDAP Filter:" : "LDAP Süzgeci:", "The filter specifies which LDAP groups shall have access to the %s instance." : "Süzgeçte %s kopyasına erişebilecek LDAP grupları belirtilir.", - "Verify settings and count groups" : "Ayarları doğrula ve grupları say", "When logging in, %s will find the user based on the following attributes:" : "Oturum açılırken, %s, aşağıdaki özniteliklere bağlı kullanıcıyı bulur:", "LDAP / AD Username:" : "LDAP / AD Kullanıcı Adı:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD kullanıcı adı ile oturum açılmasını sağlar. Kullanıcı adı uid ya da samaccountname olabilir ve algılanır.", "LDAP / AD Email Address:" : "LDAP / AD E-posta Adresi:", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "E-posta adresi ile oturum açılmasını sağlar. Mail ve mailPrimaryAddress kullanılabilir.", "Other Attributes:" : "Diğer Öznitelikler:", @@ -75,11 +72,9 @@ "Verify settings" : "Ayarları doğrula", "1. Server" : "1. Sunucu", "%s. Server:" : "%s. Sunucu:", - "Add a new and blank configuration" : "Yeni ve boş bir yapılandırma ekle", "Copy current configuration into new directory binding" : "Geçerli yapılandırmayı yeni dizin bağlamasına kopyala", "Delete the current configuration" : "Geçerli yapılandırmayı sil", "Host" : "Sunucu", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL gerekmiyorsa iletişim kuralı belirtilmeyebilir. Gerekiyorsa ldaps:// ile başlayın", "Port" : "Kapı Numarası", "Detect Port" : "Kapı Numarasını Algıla", "User DN" : "Kullanıcı DN", @@ -164,6 +159,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "Kullanıcı adları, (üst) veri depolaması ve ataması için kullanılır. Kullanıcıları kesin olarak belirlemek ve algılamak için, her LDAP kullanıcısına bir iç kullanıcı verilir. Bu kullanıcı adı ile LDAP kullanıcısının eşleştirilmesi gerekir. Oluşturulan kullanıcı adı LDAP kullanıcısının UUID değeri ile eşleştirilir. Bunun yanında LDAP etkileşimini azaltmak için DN ön belleğe alınır ancak bu işlem kimlik belirleme için kullanılmaz. DN üzerinde yapılan değişiklikler aktarılır. İç kullanıcı her yerde kullanıldığından, bir eşleştirmeyi kaldırmak pek çok yerde kalıntılar bırakır. Eşleştirmeleri kaldırmak yalnız yapılandırmaya bağlı değildir, tüm LDAP yapılandırmalarını etkiler! Üretim ortamında eşleştirmeleri asla kaldırmayın, yalnız sınama ya da deney aşamalarında kullanın.", "Clear Username-LDAP User Mapping" : "Kullanıcı Adı-LDAP Kullanıcısı Eşleştirmesini Kaldır", "Clear Groupname-LDAP Group Mapping" : "Grup Adı-LDAP Grubu Eşleştirmesini Kaldır", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "LDAP / AD sorgularında kullanıcı adı ile değiştirilecek %uid yer belirleyicisi eksik. ", + "Verify settings and count groups" : "Ayarları doğrula ve grupları say", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "LDAP / AD kullanıcı adı ile oturum açılmasını sağlar. Kullanıcı adı uid ya da samaccountname olabilir ve algılanır.", + "Add a new and blank configuration" : "Yeni ve boş bir yapılandırma ekle", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "SSL gerekmiyorsa iletişim kuralı belirtilmeyebilir. Gerekiyorsa ldaps:// ile başlayın", "in bytes" : "bayt cinsinden" },"pluralForm" :"nplurals=2; plural=(n > 1);" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/zh_CN.js b/apps/user_ldap/l10n/zh_CN.js index e73514a30bb..b45ac7a3662 100644 --- a/apps/user_ldap/l10n/zh_CN.js +++ b/apps/user_ldap/l10n/zh_CN.js @@ -44,7 +44,6 @@ OC.L10N.register( "An unspecified error occurred. Please check the settings and the log." : "发生未指定的错误。请检查设置和日志。", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "搜索的筛选条件无效，可能是由于不完全开闭括号的句法的问题，请检查。", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP/ AD连接错误，请检查主机，端口和凭证。", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "该%uid占位符缺失。它将在LDAP/ AD登录名查询时进行替换。", "Please provide a login name to test against" : "请提供登录名以测试", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "该组框被禁用，因为LDAP/ AD服务器不支持memberOf。", "Password change rejected. Hint: " : "密码更改出错。提示：", @@ -65,10 +64,8 @@ OC.L10N.register( "Edit LDAP Query" : "编辑LDAP查询", "LDAP Filter:" : "LDAP筛选:", "The filter specifies which LDAP groups shall have access to the %s instance." : "该筛选条件指定哪些LDAP组有权访问%s的实例。", - "Verify settings and count groups" : "验证设置和统计组", "When logging in, %s will find the user based on the following attributes:" : "登录时,%s将查找基于以下属性的用户：", "LDAP / AD Username:" : "LDAP/AD用户名:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "允许是能被检测到的UID或SAM帐户LDAP/ AD用户名登录。", "LDAP / AD Email Address:" : "LDAP/AD邮箱地址：", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "允许email属性登录。邮件和邮件主地址将被允许。", "Other Attributes:" : "其他属性：", @@ -77,11 +74,9 @@ OC.L10N.register( "Verify settings" : "验证设置", "1. Server" : "1.服务器", "%s. Server:" : "%s.服务器", - "Add a new and blank configuration" : "添加一个新的空白配置", "Copy current configuration into new directory binding" : "当前配置复制到新目录", "Delete the current configuration" : "删除当前配置", "Host" : "主机", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "可以忽略协议，但如要使用SSL，则需以ldaps://开头", "Port" : "端口", "Detect Port" : "检测端口", "User DN" : "User DN", @@ -163,6 +158,11 @@ OC.L10N.register( "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "用户名用于存储和分配数据 (元)。为了准确地识别和确认用户，每个用户都有一个内部用户名。这需要一个 ownCloud 用户名到 LDAP 用户的映射。创建的用户名被映射到 LDAP 用户的 UUID。此外，DN 也会被缓存，以减少 LDAP 连接，但它不用于识别。DN 的变化会被监视到。内部用户名会被用于所有地方。清除映射将导致一片混乱。清除映射不是常用的设置，它会影响到所有的 LDAP 配置！千万不要在正式环境中清除映射，只有在测试或试验时才这样做。", "Clear Username-LDAP User Mapping" : "清除用户-LDAP用户映射", "Clear Groupname-LDAP Group Mapping" : "清除组用户-LDAP级映射", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "该%uid占位符缺失。它将在LDAP/ AD登录名查询时进行替换。", + "Verify settings and count groups" : "验证设置和统计组", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "允许是能被检测到的UID或SAM帐户LDAP/ AD用户名登录。", + "Add a new and blank configuration" : "添加一个新的空白配置", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "可以忽略协议，但如要使用SSL，则需以ldaps://开头", "in bytes" : "字节数" }, "nplurals=1; plural=0;"); diff --git a/apps/user_ldap/l10n/zh_CN.json b/apps/user_ldap/l10n/zh_CN.json index 5c72fe0607b..1f78778fe8b 100644 --- a/apps/user_ldap/l10n/zh_CN.json +++ b/apps/user_ldap/l10n/zh_CN.json @@ -42,7 +42,6 @@ "An unspecified error occurred. Please check the settings and the log." : "发生未指定的错误。请检查设置和日志。", "The search filter is invalid, probably due to syntax issues like uneven number of opened and closed brackets. Please revise." : "搜索的筛选条件无效，可能是由于不完全开闭括号的句法的问题，请检查。", "A connection error to LDAP / AD occurred, please check host, port and credentials." : "LDAP/ AD连接错误，请检查主机，端口和凭证。", - "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "该%uid占位符缺失。它将在LDAP/ AD登录名查询时进行替换。", "Please provide a login name to test against" : "请提供登录名以测试", "The group box was disabled, because the LDAP / AD server does not support memberOf." : "该组框被禁用，因为LDAP/ AD服务器不支持memberOf。", "Password change rejected. Hint: " : "密码更改出错。提示：", @@ -63,10 +62,8 @@ "Edit LDAP Query" : "编辑LDAP查询", "LDAP Filter:" : "LDAP筛选:", "The filter specifies which LDAP groups shall have access to the %s instance." : "该筛选条件指定哪些LDAP组有权访问%s的实例。", - "Verify settings and count groups" : "验证设置和统计组", "When logging in, %s will find the user based on the following attributes:" : "登录时,%s将查找基于以下属性的用户：", "LDAP / AD Username:" : "LDAP/AD用户名:", - "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "允许是能被检测到的UID或SAM帐户LDAP/ AD用户名登录。", "LDAP / AD Email Address:" : "LDAP/AD邮箱地址：", "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "允许email属性登录。邮件和邮件主地址将被允许。", "Other Attributes:" : "其他属性：", @@ -75,11 +72,9 @@ "Verify settings" : "验证设置", "1. Server" : "1.服务器", "%s. Server:" : "%s.服务器", - "Add a new and blank configuration" : "添加一个新的空白配置", "Copy current configuration into new directory binding" : "当前配置复制到新目录", "Delete the current configuration" : "删除当前配置", "Host" : "主机", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "可以忽略协议，但如要使用SSL，则需以ldaps://开头", "Port" : "端口", "Detect Port" : "检测端口", "User DN" : "User DN", @@ -161,6 +156,11 @@ "Usernames are used to store and assign (meta) data. In order to precisely identify and recognize users, each LDAP user will have an internal username. This requires a mapping from username to LDAP user. The created username is mapped to the UUID of the LDAP user. Additionally the DN is cached as well to reduce LDAP interaction, but it is not used for identification. If the DN changes, the changes will be found. The internal username is used all over. Clearing the mappings will have leftovers everywhere. Clearing the mappings is not configuration sensitive, it affects all LDAP configurations! Never clear the mappings in a production environment, only in a testing or experimental stage." : "用户名用于存储和分配数据 (元)。为了准确地识别和确认用户，每个用户都有一个内部用户名。这需要一个 ownCloud 用户名到 LDAP 用户的映射。创建的用户名被映射到 LDAP 用户的 UUID。此外，DN 也会被缓存，以减少 LDAP 连接，但它不用于识别。DN 的变化会被监视到。内部用户名会被用于所有地方。清除映射将导致一片混乱。清除映射不是常用的设置，它会影响到所有的 LDAP 配置！千万不要在正式环境中清除映射，只有在测试或试验时才这样做。", "Clear Username-LDAP User Mapping" : "清除用户-LDAP用户映射", "Clear Groupname-LDAP Group Mapping" : "清除组用户-LDAP级映射", + "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "该%uid占位符缺失。它将在LDAP/ AD登录名查询时进行替换。", + "Verify settings and count groups" : "验证设置和统计组", + "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "允许是能被检测到的UID或SAM帐户LDAP/ AD用户名登录。", + "Add a new and blank configuration" : "添加一个新的空白配置", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "可以忽略协议，但如要使用SSL，则需以ldaps://开头", "in bytes" : "字节数" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file diff --git a/apps/user_ldap/l10n/zh_TW.js b/apps/user_ldap/l10n/zh_TW.js index 740af04004c..a1d33015abf 100644 --- a/apps/user_ldap/l10n/zh_TW.js +++ b/apps/user_ldap/l10n/zh_TW.js @@ -55,7 +55,6 @@ OC.L10N.register( "Selected groups" : "已選擇的群組", "Edit LDAP Query" : "編輯LDAP Query", "LDAP Filter:" : "LDAP 過慮器:", - "Verify settings and count groups" : "驗證設定並計算群組數", "When logging in, %s will find the user based on the following attributes:" : "當登入%s時，將會根據以下屬性找到使用者 :", "LDAP / AD Username:" : "LDAP / AD 使用者名稱:", "LDAP / AD Email Address:" : "LDAP / AD 電子郵件:", @@ -65,11 +64,9 @@ OC.L10N.register( "Verify settings" : "驗證設定", "1. Server" : "1. 伺服器", "%s. Server:" : "%s. 伺服器:", - "Add a new and blank configuration" : "新增一個空白的設定檔", "Copy current configuration into new directory binding" : "複製目前的設定檔到新目錄", "Delete the current configuration" : "刪除目前的設定檔", "Host" : "主機", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "若您不需要 SSL 加密連線則不需輸入通訊協定，反之請輸入 ldaps://", "Port" : "連接埠", "Detect Port" : "偵測連接阜", "User DN" : "User DN", @@ -129,6 +126,9 @@ OC.L10N.register( "Override UUID detection" : "偵測覆寫UUID", "UUID Attribute for Users:" : "使用者的UUID值:", "UUID Attribute for Groups:" : "群組的UUID值:", + "Verify settings and count groups" : "驗證設定並計算群組數", + "Add a new and blank configuration" : "新增一個空白的設定檔", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "若您不需要 SSL 加密連線則不需輸入通訊協定，反之請輸入 ldaps://", "in bytes" : "以位元組為單位" }, "nplurals=1; plural=0;"); diff --git a/apps/user_ldap/l10n/zh_TW.json b/apps/user_ldap/l10n/zh_TW.json index 979fd95e989..0275b15c270 100644 --- a/apps/user_ldap/l10n/zh_TW.json +++ b/apps/user_ldap/l10n/zh_TW.json @@ -53,7 +53,6 @@ "Selected groups" : "已選擇的群組", "Edit LDAP Query" : "編輯LDAP Query", "LDAP Filter:" : "LDAP 過慮器:", - "Verify settings and count groups" : "驗證設定並計算群組數", "When logging in, %s will find the user based on the following attributes:" : "當登入%s時，將會根據以下屬性找到使用者 :", "LDAP / AD Username:" : "LDAP / AD 使用者名稱:", "LDAP / AD Email Address:" : "LDAP / AD 電子郵件:", @@ -63,11 +62,9 @@ "Verify settings" : "驗證設定", "1. Server" : "1. 伺服器", "%s. Server:" : "%s. 伺服器:", - "Add a new and blank configuration" : "新增一個空白的設定檔", "Copy current configuration into new directory binding" : "複製目前的設定檔到新目錄", "Delete the current configuration" : "刪除目前的設定檔", "Host" : "主機", - "You can omit the protocol, except you require SSL. Then start with ldaps://" : "若您不需要 SSL 加密連線則不需輸入通訊協定，反之請輸入 ldaps://", "Port" : "連接埠", "Detect Port" : "偵測連接阜", "User DN" : "User DN", @@ -127,6 +124,9 @@ "Override UUID detection" : "偵測覆寫UUID", "UUID Attribute for Users:" : "使用者的UUID值:", "UUID Attribute for Groups:" : "群組的UUID值:", + "Verify settings and count groups" : "驗證設定並計算群組數", + "Add a new and blank configuration" : "新增一個空白的設定檔", + "You can omit the protocol, except you require SSL. Then start with ldaps://" : "若您不需要 SSL 加密連線則不需輸入通訊協定，反之請輸入 ldaps://", "in bytes" : "以位元組為單位" },"pluralForm" :"nplurals=1; plural=0;" }
\ No newline at end of file |