diff options
Diffstat (limited to 'apps')
35 files changed, 97 insertions, 9 deletions
diff --git a/apps/encryption/l10n/fr.js b/apps/encryption/l10n/fr.js index 7d527bbb095..e13d788ff99 100644 --- a/apps/encryption/l10n/fr.js +++ b/apps/encryption/l10n/fr.js @@ -24,7 +24,7 @@ OC.L10N.register( "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please run 'occ encryption:migrate' or contact your administrator" : "Vous devez migrer vos clés de chiffrement de l'ancienne version (ownCloud <= 8.0) vers la nouvelle. Veuillez exécuter 'occ encryption:migrate' ou contacter votre administrateur", "Invalid private key for encryption app. Please update your private key password in your personal settings to recover access to your encrypted files." : "Clé privée invalide pour l'application de chiffrement. Veuillez mettre à jour le mot de passe de la clef privée dans vos paramètres personnels pour récupérer l'accès à vos fichiers chiffrés.", "Encryption App is enabled, but your keys are not initialized. Please log-out and log-in again." : "L'application de chiffrement est activée mais vos clefs ne sont pas initialisées. Veuillez vous déconnecter et ensuite vous reconnecter.", - "Please enable server side encryption in the admin settings in order to use the encryption module." : "Veuillez activer le cryptage côté serveur dans les paramètres d'administration pour utiliser le module de cryptage.", + "Please enable server side encryption in the admin settings in order to use the encryption module." : "Veuillez activer le chiffrement côté serveur dans les paramètres d'administration pour utiliser le module de cryptage.", "Encryption app is enabled and ready" : "L'application de chiffrement est activée et prête", "Bad Signature" : "Mauvaise signature", "Missing Signature" : "Signature manquante", diff --git a/apps/encryption/l10n/fr.json b/apps/encryption/l10n/fr.json index 0977d7c44ab..f093f24d1db 100644 --- a/apps/encryption/l10n/fr.json +++ b/apps/encryption/l10n/fr.json @@ -22,7 +22,7 @@ "You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please run 'occ encryption:migrate' or contact your administrator" : "Vous devez migrer vos clés de chiffrement de l'ancienne version (ownCloud <= 8.0) vers la nouvelle. Veuillez exécuter 'occ encryption:migrate' ou contacter votre administrateur", "Invalid private key for encryption app. Please update your private key password in your personal settings to recover access to your encrypted files." : "Clé privée invalide pour l'application de chiffrement. Veuillez mettre à jour le mot de passe de la clef privée dans vos paramètres personnels pour récupérer l'accès à vos fichiers chiffrés.", "Encryption App is enabled, but your keys are not initialized. Please log-out and log-in again." : "L'application de chiffrement est activée mais vos clefs ne sont pas initialisées. Veuillez vous déconnecter et ensuite vous reconnecter.", - "Please enable server side encryption in the admin settings in order to use the encryption module." : "Veuillez activer le cryptage côté serveur dans les paramètres d'administration pour utiliser le module de cryptage.", + "Please enable server side encryption in the admin settings in order to use the encryption module." : "Veuillez activer le chiffrement côté serveur dans les paramètres d'administration pour utiliser le module de cryptage.", "Encryption app is enabled and ready" : "L'application de chiffrement est activée et prête", "Bad Signature" : "Mauvaise signature", "Missing Signature" : "Signature manquante", diff --git a/apps/federation/l10n/sl.js b/apps/federation/l10n/sl.js index e05f8e0f322..494a1f60783 100644 --- a/apps/federation/l10n/sl.js +++ b/apps/federation/l10n/sl.js @@ -3,6 +3,7 @@ OC.L10N.register( { "Added to the list of trusted servers" : "Dodano na spisek varnih strežnikov", "Server is already in the list of trusted servers." : "Strežnik je že na seznamu potrjenih strežnikov.", + "No server to federate with found" : "Ne najdem strežnika za federiranje", "Could not add server" : "Ni mogoče dodati strežnika.", "Federation" : "Zvezni oblaki", "Trusted servers" : "Zanesljivi strežniki", diff --git a/apps/federation/l10n/sl.json b/apps/federation/l10n/sl.json index 08f60f98b28..28d8f66b2cd 100644 --- a/apps/federation/l10n/sl.json +++ b/apps/federation/l10n/sl.json @@ -1,6 +1,7 @@ { "translations": { "Added to the list of trusted servers" : "Dodano na spisek varnih strežnikov", "Server is already in the list of trusted servers." : "Strežnik je že na seznamu potrjenih strežnikov.", + "No server to federate with found" : "Ne najdem strežnika za federiranje", "Could not add server" : "Ni mogoče dodati strežnika.", "Federation" : "Zvezni oblaki", "Trusted servers" : "Zanesljivi strežniki", diff --git a/apps/files/l10n/eu.js b/apps/files/l10n/eu.js index 3ee50228190..058d51c226a 100644 --- a/apps/files/l10n/eu.js +++ b/apps/files/l10n/eu.js @@ -101,7 +101,9 @@ OC.L10N.register( "A file has been added to or removed from your <strong>favorites</strong>" : "Fitxategi bat gehitu edo kendu da zure <strong>gogokoetatik</strong>", "A file or folder has been <strong>changed</strong> or <strong>renamed</strong>" : "A file or folder has been <strong>changed</strong> or <strong>renamed</strong>", "A new file or folder has been <strong>created</strong>" : "Fitxategi edo karpeta berri bat <strong>sortu da</strong>", + "A file or folder has been <strong>deleted</strong>" : "Fitxategi edo karpeta bat <strong>ezabatu da</strong>", "Limit notifications about creation and changes to your <strong>favorite files</strong> <em>(Stream only)</em>" : "Limit notifications about creation and changes to your <strong>favorite files</strong> <em>(Stream only)</em>", + "A file or folder has been <strong>restored</strong>" : "Fitxategia edo karpeta <strong>berrezarri</strong> da", "Unlimited" : "Mugarik gabe", "Upload (max. %s)" : "Igo (max. %s)", "File handling" : "Fitxategien kudeaketa", @@ -110,6 +112,8 @@ OC.L10N.register( "Save" : "Gorde", "With PHP-FPM it might take 5 minutes for changes to be applied." : "PHP-FPM-rekin 5 minutu pasa daiteke aldaketak aplikatu ahal izateko.", "Missing permissions to edit from here." : "Missing permissions to edit from here.", + "%s of %s used" : "%s - %s-tik erabilita", + "%s used" : "%s erabilita", "Settings" : "Ezarpenak", "Show hidden files" : "Erakutsi ezkutuko fitxategiak", "WebDAV" : "WebDAV", diff --git a/apps/files/l10n/eu.json b/apps/files/l10n/eu.json index 9bc05236e1e..1e3fb7fc830 100644 --- a/apps/files/l10n/eu.json +++ b/apps/files/l10n/eu.json @@ -99,7 +99,9 @@ "A file has been added to or removed from your <strong>favorites</strong>" : "Fitxategi bat gehitu edo kendu da zure <strong>gogokoetatik</strong>", "A file or folder has been <strong>changed</strong> or <strong>renamed</strong>" : "A file or folder has been <strong>changed</strong> or <strong>renamed</strong>", "A new file or folder has been <strong>created</strong>" : "Fitxategi edo karpeta berri bat <strong>sortu da</strong>", + "A file or folder has been <strong>deleted</strong>" : "Fitxategi edo karpeta bat <strong>ezabatu da</strong>", "Limit notifications about creation and changes to your <strong>favorite files</strong> <em>(Stream only)</em>" : "Limit notifications about creation and changes to your <strong>favorite files</strong> <em>(Stream only)</em>", + "A file or folder has been <strong>restored</strong>" : "Fitxategia edo karpeta <strong>berrezarri</strong> da", "Unlimited" : "Mugarik gabe", "Upload (max. %s)" : "Igo (max. %s)", "File handling" : "Fitxategien kudeaketa", @@ -108,6 +110,8 @@ "Save" : "Gorde", "With PHP-FPM it might take 5 minutes for changes to be applied." : "PHP-FPM-rekin 5 minutu pasa daiteke aldaketak aplikatu ahal izateko.", "Missing permissions to edit from here." : "Missing permissions to edit from here.", + "%s of %s used" : "%s - %s-tik erabilita", + "%s used" : "%s erabilita", "Settings" : "Ezarpenak", "Show hidden files" : "Erakutsi ezkutuko fitxategiak", "WebDAV" : "WebDAV", diff --git a/apps/files_external/l10n/sl.js b/apps/files_external/l10n/sl.js index 75dac91502c..47c08def8bc 100644 --- a/apps/files_external/l10n/sl.js +++ b/apps/files_external/l10n/sl.js @@ -6,6 +6,7 @@ OC.L10N.register( "Please provide a valid app key and secret." : "Vpisati je treba veljaven ključ programa in kodo.", "Step 1 failed. Exception: %s" : "1. korak je spodletel. Izjemna napaka: %s", "Step 2 failed. Exception: %s" : "2. korak je spodletel. Izjemna napaka: %s", + "External storages" : "Zunanje hrambe", "Dropbox App Configuration" : "Nastavitve programa Dropbox", "Google Drive App Configuration" : "Nastavitve programa Google Drive", "Personal" : "Osebno", @@ -83,6 +84,7 @@ OC.L10N.register( "Google Drive" : "Google Drive", "Local" : "Krajevno", "Location" : "Mesto", + "Nextcloud" : "Nextcloud", "SFTP" : "SFTP", "Root" : "Koren", "SFTP with secret key login" : "Prijava prek protokola SFTP z geslom", @@ -94,6 +96,7 @@ OC.L10N.register( "OpenStack Object Storage" : "Shramba predmeta OpenStack", "Service name" : "Ime storitve", "Request timeout (seconds)" : "Zahtevan časovni zamik (sekunde)", + "External storage support" : "Podpora zunanjim hrambam", "No external storage configured" : "Ni določene zunanje shrambe", "You can add external storages in the personal settings" : "Med nastavitvami je mogoče dodati tudi zunanjo shrambo.", "Name" : "Ime", diff --git a/apps/files_external/l10n/sl.json b/apps/files_external/l10n/sl.json index 1944a9d4f6c..fd443477164 100644 --- a/apps/files_external/l10n/sl.json +++ b/apps/files_external/l10n/sl.json @@ -4,6 +4,7 @@ "Please provide a valid app key and secret." : "Vpisati je treba veljaven ključ programa in kodo.", "Step 1 failed. Exception: %s" : "1. korak je spodletel. Izjemna napaka: %s", "Step 2 failed. Exception: %s" : "2. korak je spodletel. Izjemna napaka: %s", + "External storages" : "Zunanje hrambe", "Dropbox App Configuration" : "Nastavitve programa Dropbox", "Google Drive App Configuration" : "Nastavitve programa Google Drive", "Personal" : "Osebno", @@ -81,6 +82,7 @@ "Google Drive" : "Google Drive", "Local" : "Krajevno", "Location" : "Mesto", + "Nextcloud" : "Nextcloud", "SFTP" : "SFTP", "Root" : "Koren", "SFTP with secret key login" : "Prijava prek protokola SFTP z geslom", @@ -92,6 +94,7 @@ "OpenStack Object Storage" : "Shramba predmeta OpenStack", "Service name" : "Ime storitve", "Request timeout (seconds)" : "Zahtevan časovni zamik (sekunde)", + "External storage support" : "Podpora zunanjim hrambam", "No external storage configured" : "Ni določene zunanje shrambe", "You can add external storages in the personal settings" : "Med nastavitvami je mogoče dodati tudi zunanjo shrambo.", "Name" : "Ime", diff --git a/apps/theming/css/theming.scss b/apps/theming/css/theming.scss index 20b84d2a0d3..77fc6f70200 100644 --- a/apps/theming/css/theming.scss +++ b/apps/theming/css/theming.scss @@ -66,7 +66,7 @@ input.primary { } @if (lightness($color-primary) > 50) { - #body-login input.login { + #body-login #submit-icon.icon-confirm-white { background-image: url('../../../core/img/actions/confirm.svg'); } } diff --git a/apps/updatenotification/l10n/en_GB.js b/apps/updatenotification/l10n/en_GB.js index 6f96e96194b..717cd107c18 100644 --- a/apps/updatenotification/l10n/en_GB.js +++ b/apps/updatenotification/l10n/en_GB.js @@ -14,8 +14,10 @@ OC.L10N.register( "A new version is available: %s" : "A new version is available: %s", "Open updater" : "Open updater", "Download now" : "Download now", + "The update check is not yet finished. Please refresh the page." : "The update check is not yet finished. Please refresh the page.", "Your version is up to date." : "Your version is up to date.", "Checked on %s" : "Checked on %s", + "A non-default update server is in use to be checked for updates:" : "A non-default update server is in use to be checked for updates:", "Update channel:" : "Update channel:", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found.", diff --git a/apps/updatenotification/l10n/en_GB.json b/apps/updatenotification/l10n/en_GB.json index 10c642ab5cc..04a5941b09b 100644 --- a/apps/updatenotification/l10n/en_GB.json +++ b/apps/updatenotification/l10n/en_GB.json @@ -12,8 +12,10 @@ "A new version is available: %s" : "A new version is available: %s", "Open updater" : "Open updater", "Download now" : "Download now", + "The update check is not yet finished. Please refresh the page." : "The update check is not yet finished. Please refresh the page.", "Your version is up to date." : "Your version is up to date.", "Checked on %s" : "Checked on %s", + "A non-default update server is in use to be checked for updates:" : "A non-default update server is in use to be checked for updates:", "Update channel:" : "Update channel:", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found.", diff --git a/apps/updatenotification/l10n/es.js b/apps/updatenotification/l10n/es.js index 7e4616d0339..eef863512eb 100644 --- a/apps/updatenotification/l10n/es.js +++ b/apps/updatenotification/l10n/es.js @@ -14,8 +14,10 @@ OC.L10N.register( "A new version is available: %s" : "Hay una nueva versión disponible: %s", "Open updater" : "Abrir el actualizador", "Download now" : "Descargar ahora", + "The update check is not yet finished. Please refresh the page." : "La comprobación de actuliazaciones no ha finalizado aún. Por favor, recarga la página.", "Your version is up to date." : "Su versión está actualizada.", "Checked on %s" : "Revisado el %s", + "A non-default update server is in use to be checked for updates:" : "Se está usando un servidor de actualización no estándar para comprobar actualizaciones:", "Update channel:" : "Canal de actualización: ", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Siempre podrás actualizar a la versión más reciente o al canal experimental, pero nunca podrás volver a un canal más estable.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Nota: tras un nuevo lanzamiento, puede pasar algo de tiempo antes de que aparezca aquí. Escalonamos la difusión de nuevas versiones a nuestros usuarios y a veces saltamos una versión cuando aparecen problemas.", diff --git a/apps/updatenotification/l10n/es.json b/apps/updatenotification/l10n/es.json index c36741abb4c..27288f8db31 100644 --- a/apps/updatenotification/l10n/es.json +++ b/apps/updatenotification/l10n/es.json @@ -12,8 +12,10 @@ "A new version is available: %s" : "Hay una nueva versión disponible: %s", "Open updater" : "Abrir el actualizador", "Download now" : "Descargar ahora", + "The update check is not yet finished. Please refresh the page." : "La comprobación de actuliazaciones no ha finalizado aún. Por favor, recarga la página.", "Your version is up to date." : "Su versión está actualizada.", "Checked on %s" : "Revisado el %s", + "A non-default update server is in use to be checked for updates:" : "Se está usando un servidor de actualización no estándar para comprobar actualizaciones:", "Update channel:" : "Canal de actualización: ", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Siempre podrás actualizar a la versión más reciente o al canal experimental, pero nunca podrás volver a un canal más estable.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Nota: tras un nuevo lanzamiento, puede pasar algo de tiempo antes de que aparezca aquí. Escalonamos la difusión de nuevas versiones a nuestros usuarios y a veces saltamos una versión cuando aparecen problemas.", diff --git a/apps/updatenotification/l10n/fr.js b/apps/updatenotification/l10n/fr.js index 826fbe73535..eae1cb97a42 100644 --- a/apps/updatenotification/l10n/fr.js +++ b/apps/updatenotification/l10n/fr.js @@ -14,11 +14,13 @@ OC.L10N.register( "A new version is available: %s" : "Une nouvelle version est disponible : %s", "Open updater" : "Ouvrir le système de mise à jour", "Download now" : "Télécharger maintenant", + "The update check is not yet finished. Please refresh the page." : "La vérification de la mise-à-jour n'est pas encore terminée. Veuillez rafraîchir la page.", "Your version is up to date." : "Votre version est à jour.", "Checked on %s" : "Vérifié le %s", + "A non-default update server is in use to be checked for updates:" : "Un serveur spécifique est actuellement configuré pour la vérification des mises-à-jour :", "Update channel:" : "Canal de mise à jour :", - "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Vous pouvez à tout moment mettre à jour vers une version plus récente ou un canal expérimental. Cependant vous ne pourrez jamais revenir à un canal plus stable.", - "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Notez qu'après une sortie d'une nouvelle version cela peut prendre quelques temps avant qu'il s'affiche ici. Nous déployons de nouvelles versions réparties dans le temps à nos utilisateurs et quelquefois ignorer une version quand des problèmes ont été trouvés. ", + "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Vous pouvez à tout moment mettre à jour votre instance Nextcloud vers une version plus récente ou un canal expérimental. Vous ne pourrez cependant jamais revenir à un canal plus stable.", + "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Veuillez noter qu'il peut s'écouler un certain temps entre la sortie d'une nouvelle version et sa disponibilité pour téléchargement et mise-à-jour ici, sur votre instance. Nous répartissons le déploiement des nouvelles versions Nextcloud dans le temps à l'ensemble de nos utilisateurs. Certaines versions mineures, présentant des bugs problématiques, peuvent être sautées.", "Notify members of the following groups about available updates:" : "Notifier les membres des groupes suivants des mises à jours disponibles :", "Only notification for app updates are available." : "Seules les notifications pour les mises à jour d'applications sont diponibles.", "The selected update channel makes dedicated notifications for the server obsolete." : "Le canal de mise à jour sélectionné rend obsolètes les notifications dédiées au serveur.", diff --git a/apps/updatenotification/l10n/fr.json b/apps/updatenotification/l10n/fr.json index 85fd31e66f6..89b384b02ae 100644 --- a/apps/updatenotification/l10n/fr.json +++ b/apps/updatenotification/l10n/fr.json @@ -12,11 +12,13 @@ "A new version is available: %s" : "Une nouvelle version est disponible : %s", "Open updater" : "Ouvrir le système de mise à jour", "Download now" : "Télécharger maintenant", + "The update check is not yet finished. Please refresh the page." : "La vérification de la mise-à-jour n'est pas encore terminée. Veuillez rafraîchir la page.", "Your version is up to date." : "Votre version est à jour.", "Checked on %s" : "Vérifié le %s", + "A non-default update server is in use to be checked for updates:" : "Un serveur spécifique est actuellement configuré pour la vérification des mises-à-jour :", "Update channel:" : "Canal de mise à jour :", - "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Vous pouvez à tout moment mettre à jour vers une version plus récente ou un canal expérimental. Cependant vous ne pourrez jamais revenir à un canal plus stable.", - "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Notez qu'après une sortie d'une nouvelle version cela peut prendre quelques temps avant qu'il s'affiche ici. Nous déployons de nouvelles versions réparties dans le temps à nos utilisateurs et quelquefois ignorer une version quand des problèmes ont été trouvés. ", + "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Vous pouvez à tout moment mettre à jour votre instance Nextcloud vers une version plus récente ou un canal expérimental. Vous ne pourrez cependant jamais revenir à un canal plus stable.", + "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Veuillez noter qu'il peut s'écouler un certain temps entre la sortie d'une nouvelle version et sa disponibilité pour téléchargement et mise-à-jour ici, sur votre instance. Nous répartissons le déploiement des nouvelles versions Nextcloud dans le temps à l'ensemble de nos utilisateurs. Certaines versions mineures, présentant des bugs problématiques, peuvent être sautées.", "Notify members of the following groups about available updates:" : "Notifier les membres des groupes suivants des mises à jours disponibles :", "Only notification for app updates are available." : "Seules les notifications pour les mises à jour d'applications sont diponibles.", "The selected update channel makes dedicated notifications for the server obsolete." : "Le canal de mise à jour sélectionné rend obsolètes les notifications dédiées au serveur.", diff --git a/apps/updatenotification/l10n/is.js b/apps/updatenotification/l10n/is.js index 801b6f7c3fe..80067b8719c 100644 --- a/apps/updatenotification/l10n/is.js +++ b/apps/updatenotification/l10n/is.js @@ -14,8 +14,10 @@ OC.L10N.register( "A new version is available: %s" : "Ný útgáfa er tiltæk: %s", "Open updater" : "Opna uppfærslustýringu", "Download now" : "Sækja núna", + "The update check is not yet finished. Please refresh the page." : "Athugun á uppfærslum er ekki ennþá lokið. Endurlestu síðuna.", "Your version is up to date." : "Útgáfan þín er af nýjustu gerð.", "Checked on %s" : "Athugað þann %s", + "A non-default update server is in use to be checked for updates:" : "Uppfærsluþjónn sem ekki er sjálfgefinn er núna í notkun til að athuga með uppfærslur:", "Update channel:" : "Uppfærslurás:", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Þú getur alltaf uppfært í nýrri útgáfu eða tilraunaútgáfurás. En þú getur aldrei niðurfært í stöðugri rás.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Athugaðu að það getur tekið nokkurn tíma áður en nýjar útgáfur birtast hér. Við dreifum útgáfum yfir tíma auk þess sem stundum er útgáfum sleppt ef í þeim finnast hnökrar.", diff --git a/apps/updatenotification/l10n/is.json b/apps/updatenotification/l10n/is.json index 8ff7e4a004f..af1acd5d6a9 100644 --- a/apps/updatenotification/l10n/is.json +++ b/apps/updatenotification/l10n/is.json @@ -12,8 +12,10 @@ "A new version is available: %s" : "Ný útgáfa er tiltæk: %s", "Open updater" : "Opna uppfærslustýringu", "Download now" : "Sækja núna", + "The update check is not yet finished. Please refresh the page." : "Athugun á uppfærslum er ekki ennþá lokið. Endurlestu síðuna.", "Your version is up to date." : "Útgáfan þín er af nýjustu gerð.", "Checked on %s" : "Athugað þann %s", + "A non-default update server is in use to be checked for updates:" : "Uppfærsluþjónn sem ekki er sjálfgefinn er núna í notkun til að athuga með uppfærslur:", "Update channel:" : "Uppfærslurás:", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Þú getur alltaf uppfært í nýrri útgáfu eða tilraunaútgáfurás. En þú getur aldrei niðurfært í stöðugri rás.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Athugaðu að það getur tekið nokkurn tíma áður en nýjar útgáfur birtast hér. Við dreifum útgáfum yfir tíma auk þess sem stundum er útgáfum sleppt ef í þeim finnast hnökrar.", diff --git a/apps/updatenotification/l10n/ru.js b/apps/updatenotification/l10n/ru.js index e523c19689a..f95ce5dde0e 100644 --- a/apps/updatenotification/l10n/ru.js +++ b/apps/updatenotification/l10n/ru.js @@ -14,8 +14,10 @@ OC.L10N.register( "A new version is available: %s" : "Доступна новая версия: %s", "Open updater" : "Открыть окно обновления", "Download now" : "Скачать сейчас", + "The update check is not yet finished. Please refresh the page." : "Проверка обновлений ещё не закончена. Пожалуйста обновите страницу.", "Your version is up to date." : "Версия не требует обновления.", "Checked on %s" : "Проверено %s", + "A non-default update server is in use to be checked for updates:" : "Не сервер по умолчанию используется как сервер для проверки обновлений:", "Update channel:" : "Канал обновлений:", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Вы всегда можете переключиться на экспериментальный канал обновлений для получения новейших версий. Но учтите, что вы не сможете переключиться обратно на канал обновлений для стабильных версий.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Обратите внимание, что от момента выпуска новой версии до её появления здесь может пройти некоторое время. Мы растягиваем во времени распространение новых версий и иногда, при обнаружении проблем, пропускаем версию.", diff --git a/apps/updatenotification/l10n/ru.json b/apps/updatenotification/l10n/ru.json index 0f4ceac7c57..4a18076dcd1 100644 --- a/apps/updatenotification/l10n/ru.json +++ b/apps/updatenotification/l10n/ru.json @@ -12,8 +12,10 @@ "A new version is available: %s" : "Доступна новая версия: %s", "Open updater" : "Открыть окно обновления", "Download now" : "Скачать сейчас", + "The update check is not yet finished. Please refresh the page." : "Проверка обновлений ещё не закончена. Пожалуйста обновите страницу.", "Your version is up to date." : "Версия не требует обновления.", "Checked on %s" : "Проверено %s", + "A non-default update server is in use to be checked for updates:" : "Не сервер по умолчанию используется как сервер для проверки обновлений:", "Update channel:" : "Канал обновлений:", "You can always update to a newer version / experimental channel. But you can never downgrade to a more stable channel." : "Вы всегда можете переключиться на экспериментальный канал обновлений для получения новейших версий. Но учтите, что вы не сможете переключиться обратно на канал обновлений для стабильных версий.", "Note that after a new release it can take some time before it shows up here. We roll out new versions spread out over time to our users and sometimes skip a version when issues are found." : "Обратите внимание, что от момента выпуска новой версии до её появления здесь может пройти некоторое время. Мы растягиваем во времени распространение новых версий и иногда, при обнаружении проблем, пропускаем версию.", diff --git a/apps/user_ldap/l10n/de.js b/apps/user_ldap/l10n/de.js index 9bd99799e71..f5a2be323d2 100644 --- a/apps/user_ldap/l10n/de.js +++ b/apps/user_ldap/l10n/de.js @@ -79,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Einstellungen überprüfen und die Gruppen zählen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Erlaubt die Anmeldung gegen den LDAP/AD-Benutzernamen, der entweder \"uid\" oder \"sAMAccountName\" ist, und erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Erlaubt die Anmeldung gegen ein E-Mail-Attribut. \"mail\" und \"mailPrimaryAddress\" sind erlaubt.", "Other Attributes:" : "Andere Attribute:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Bestimmt den Filter, welcher bei einer Anmeldung angewandt wird. \"%%uid\" ersetzt den Benutzernamen bei der Anmeldung. Beispiel: \"uid=%%uid\"", "Test Loginname" : "Anmeldenamen testen", "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", diff --git a/apps/user_ldap/l10n/de.json b/apps/user_ldap/l10n/de.json index 9a20af8dc0a..a9ff53f746b 100644 --- a/apps/user_ldap/l10n/de.json +++ b/apps/user_ldap/l10n/de.json @@ -77,8 +77,11 @@ "Verify settings and count the groups" : "Einstellungen überprüfen und die Gruppen zählen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Erlaubt die Anmeldung gegen den LDAP/AD-Benutzernamen, der entweder \"uid\" oder \"sAMAccountName\" ist, und erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Erlaubt die Anmeldung gegen ein E-Mail-Attribut. \"mail\" und \"mailPrimaryAddress\" sind erlaubt.", "Other Attributes:" : "Andere Attribute:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Bestimmt den Filter, welcher bei einer Anmeldung angewandt wird. \"%%uid\" ersetzt den Benutzernamen bei der Anmeldung. Beispiel: \"uid=%%uid\"", "Test Loginname" : "Anmeldenamen testen", "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", diff --git a/apps/user_ldap/l10n/de_DE.js b/apps/user_ldap/l10n/de_DE.js index d4085c7f475..804b303727d 100644 --- a/apps/user_ldap/l10n/de_DE.js +++ b/apps/user_ldap/l10n/de_DE.js @@ -79,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Überprüfe die Einstellungen und zähle die Gruppen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Erlaubt die Anmeldung gegen den LDAP/AD-Benutzernamen, der entweder \"uid\" oder \"sAMAccountName\" ist, und erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Erlaubt die Anmeldung gegen ein E-Mail-Attribut. \"mail\" und \"mailPrimaryAddress\" sind erlaubt.", "Other Attributes:" : "Andere Attribute:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Bestimmt den Filter, welcher bei einer Anmeldung angewandt wird. \"%%uid\" ersetzt den Benutzernamen bei der Anmeldung. Beispiel: \"uid=%%uid\"", "Test Loginname" : "Anmeldenamen testen", "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", diff --git a/apps/user_ldap/l10n/de_DE.json b/apps/user_ldap/l10n/de_DE.json index c0a1c633a08..0be5003fc62 100644 --- a/apps/user_ldap/l10n/de_DE.json +++ b/apps/user_ldap/l10n/de_DE.json @@ -77,8 +77,11 @@ "Verify settings and count the groups" : "Überprüfe die Einstellungen und zähle die Gruppen", "When logging in, %s will find the user based on the following attributes:" : "Beim Anmelden wird %s den Nutzer basierend auf folgenden Attributen finden:", "LDAP / AD Username:" : "LDAP-/AD-Benutzername:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Erlaubt die Anmeldung gegen den LDAP/AD-Benutzernamen, der entweder \"uid\" oder \"sAMAccountName\" ist, und erkannt wird.", "LDAP / AD Email Address:" : "LDAP-/AD-E-Mail-Adresse:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Erlaubt die Anmeldung gegen ein E-Mail-Attribut. \"mail\" und \"mailPrimaryAddress\" sind erlaubt.", "Other Attributes:" : "Andere Attribute:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Bestimmt den Filter, welcher bei einer Anmeldung angewandt wird. \"%%uid\" ersetzt den Benutzernamen bei der Anmeldung. Beispiel: \"uid=%%uid\"", "Test Loginname" : "Anmeldenamen testen", "Verify settings" : "Einstellungen überprüfen", "1. Server" : "1. Server", diff --git a/apps/user_ldap/l10n/en_GB.js b/apps/user_ldap/l10n/en_GB.js index b950d42133b..66c6d2b2b9c 100644 --- a/apps/user_ldap/l10n/en_GB.js +++ b/apps/user_ldap/l10n/en_GB.js @@ -79,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Verify settings and count the groups", "When logging in, %s will find the user based on the following attributes:" : "When logging in, %s will find the user based on the following attributes:", "LDAP / AD Username:" : "LDAP / AD Username:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected.", "LDAP / AD Email Address:" : "LDAP / AD Email Address:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed.", "Other Attributes:" : "Other Attributes:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"", "Test Loginname" : "Test Loginname", "Verify settings" : "Verify settings", "1. Server" : "1. Server", diff --git a/apps/user_ldap/l10n/en_GB.json b/apps/user_ldap/l10n/en_GB.json index 9a283c5490c..9c608899ada 100644 --- a/apps/user_ldap/l10n/en_GB.json +++ b/apps/user_ldap/l10n/en_GB.json @@ -77,8 +77,11 @@ "Verify settings and count the groups" : "Verify settings and count the groups", "When logging in, %s will find the user based on the following attributes:" : "When logging in, %s will find the user based on the following attributes:", "LDAP / AD Username:" : "LDAP / AD Username:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected.", "LDAP / AD Email Address:" : "LDAP / AD Email Address:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed.", "Other Attributes:" : "Other Attributes:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"", "Test Loginname" : "Test Loginname", "Verify settings" : "Verify settings", "1. Server" : "1. Server", diff --git a/apps/user_ldap/l10n/es.js b/apps/user_ldap/l10n/es.js index e8d780c28f7..3c250fc01a5 100644 --- a/apps/user_ldap/l10n/es.js +++ b/apps/user_ldap/l10n/es.js @@ -3,7 +3,9 @@ OC.L10N.register( { "Failed to clear the mappings." : "Ocurrió un fallo al borrar las asignaciones.", "Failed to delete the server configuration" : "No se pudo borrar la configuración del servidor", + "Invalid configuration: Anonymous binding is not allowed." : "Configuración no válida: No se permite enlazado anónimo.", "Valid configuration, connection established!" : "Configuración válida. ¡Conexión establecida!", + "Valid configuration, but binding failed. Please check the server settings and credentials." : "Configuración válida, pero falló el enlazado. Por favor compruebe los ajustes del servidor y las credenciales.", "Invalid configuration. Please have a look at the logs for further details." : "Configuración inválida. Por favor, echa un vistazo al registro para más detalles.", "No action specified" : "No se ha especificado la acción", "No configuration specified" : "No se ha especificado la configuración", @@ -77,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Verifique los ajustes y cuente los grupos", "When logging in, %s will find the user based on the following attributes:" : "Cuando se inicia sesión, %s encontrará al usuario basado en los siguientes atributos:", "LDAP / AD Username:" : "Nombre de usuario LDAP /AD:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Permite registrarse contra el usuario LDAP / AD, que es o \"uid\" o \"sAMNombreDeCuenta\" y será detectado.", "LDAP / AD Email Address:" : "LDAP / AD dirección de correo electrónico:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Permite registrarse contra un atributo de correo electrónico. Se permiten \"mail\" y \"mailPrimaryAddress\".", "Other Attributes:" : "Otros atributos:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Define el filtro que aplicar cuando se intenta el registro. \"%%uid\" reemplaza al nombre de usuario en la acción de registro. Ejemplo: \"uid=%%uid\"", "Test Loginname" : "Probar nombre de sesión", "Verify settings" : "Verificar configuración", "1. Server" : "1. Servidor", diff --git a/apps/user_ldap/l10n/es.json b/apps/user_ldap/l10n/es.json index 6c6ba0c095b..c7e4ffaef7d 100644 --- a/apps/user_ldap/l10n/es.json +++ b/apps/user_ldap/l10n/es.json @@ -1,7 +1,9 @@ { "translations": { "Failed to clear the mappings." : "Ocurrió un fallo al borrar las asignaciones.", "Failed to delete the server configuration" : "No se pudo borrar la configuración del servidor", + "Invalid configuration: Anonymous binding is not allowed." : "Configuración no válida: No se permite enlazado anónimo.", "Valid configuration, connection established!" : "Configuración válida. ¡Conexión establecida!", + "Valid configuration, but binding failed. Please check the server settings and credentials." : "Configuración válida, pero falló el enlazado. Por favor compruebe los ajustes del servidor y las credenciales.", "Invalid configuration. Please have a look at the logs for further details." : "Configuración inválida. Por favor, echa un vistazo al registro para más detalles.", "No action specified" : "No se ha especificado la acción", "No configuration specified" : "No se ha especificado la configuración", @@ -75,8 +77,11 @@ "Verify settings and count the groups" : "Verifique los ajustes y cuente los grupos", "When logging in, %s will find the user based on the following attributes:" : "Cuando se inicia sesión, %s encontrará al usuario basado en los siguientes atributos:", "LDAP / AD Username:" : "Nombre de usuario LDAP /AD:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Permite registrarse contra el usuario LDAP / AD, que es o \"uid\" o \"sAMNombreDeCuenta\" y será detectado.", "LDAP / AD Email Address:" : "LDAP / AD dirección de correo electrónico:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Permite registrarse contra un atributo de correo electrónico. Se permiten \"mail\" y \"mailPrimaryAddress\".", "Other Attributes:" : "Otros atributos:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Define el filtro que aplicar cuando se intenta el registro. \"%%uid\" reemplaza al nombre de usuario en la acción de registro. Ejemplo: \"uid=%%uid\"", "Test Loginname" : "Probar nombre de sesión", "Verify settings" : "Verificar configuración", "1. Server" : "1. Servidor", diff --git a/apps/user_ldap/l10n/es_MX.js b/apps/user_ldap/l10n/es_MX.js index 87b7c02026b..883908617c9 100644 --- a/apps/user_ldap/l10n/es_MX.js +++ b/apps/user_ldap/l10n/es_MX.js @@ -79,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Verificar las configuraciones y contar los grupos", "When logging in, %s will find the user based on the following attributes:" : "Al iniciar sesion, %s encontrará al usuario con base en los siguientes atributos:", "LDAP / AD Username:" : "Usuario LDAP / AD:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Permite iniciar sesión contra el usuario LDAP / AD que es ya sea \"uid\" o \"sAMAccountName\" y será detectado. ", "LDAP / AD Email Address:" : "Dirección de correo electrónico LDAP / AD", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Permite iniciar sesión contra el atributo de email. \"mail\" y \"mailPrimaryAddresw\" está permitido. ", "Other Attributes:" : "Otros atributos:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Define el filtro a aplicar cuando se intenta iniciar sesión. \"%% uid\" remplaza el usuario en la acción de inicio de sesión. Ejemplo: \"uid=%% uid\"", "Test Loginname" : "Probar nombre de usuario", "Verify settings" : "Verificar configuraciones ", "1. Server" : "1. Servidor", diff --git a/apps/user_ldap/l10n/es_MX.json b/apps/user_ldap/l10n/es_MX.json index ea776111b9e..b1de944e784 100644 --- a/apps/user_ldap/l10n/es_MX.json +++ b/apps/user_ldap/l10n/es_MX.json @@ -77,8 +77,11 @@ "Verify settings and count the groups" : "Verificar las configuraciones y contar los grupos", "When logging in, %s will find the user based on the following attributes:" : "Al iniciar sesion, %s encontrará al usuario con base en los siguientes atributos:", "LDAP / AD Username:" : "Usuario LDAP / AD:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Permite iniciar sesión contra el usuario LDAP / AD que es ya sea \"uid\" o \"sAMAccountName\" y será detectado. ", "LDAP / AD Email Address:" : "Dirección de correo electrónico LDAP / AD", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Permite iniciar sesión contra el atributo de email. \"mail\" y \"mailPrimaryAddresw\" está permitido. ", "Other Attributes:" : "Otros atributos:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Define el filtro a aplicar cuando se intenta iniciar sesión. \"%% uid\" remplaza el usuario en la acción de inicio de sesión. Ejemplo: \"uid=%% uid\"", "Test Loginname" : "Probar nombre de usuario", "Verify settings" : "Verificar configuraciones ", "1. Server" : "1. Servidor", diff --git a/apps/user_ldap/l10n/fr.js b/apps/user_ldap/l10n/fr.js index 12febb9da9c..61da9d81389 100644 --- a/apps/user_ldap/l10n/fr.js +++ b/apps/user_ldap/l10n/fr.js @@ -79,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Vérifier les paramètres et compter les groupes", "When logging in, %s will find the user based on the following attributes:" : "Au login, %s cherchera l'utilisateur sur base de ces attributs :", "LDAP / AD Username:" : "Nom d'utilisateur LDAP / AD :", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Autorise l'authentification à partir du nom d'utilisateur LDAP / AD.Celui-ci sera détecté et pourra être soit \"uid\", soit \"sAMAccountName\".", "LDAP / AD Email Address:" : "Adresse mail LDAP / AD :", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Autorise l'authentification par adresse e-mail. \"mail\" et \"mailPrimaryAddress\" sont autorisés.", "Other Attributes:" : "Autres attributs :", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Définit le filtre à appliquer lors de la tentative de connexion. \"%%uid\" remplace le nom d'utilisateur lors de l'authentification. Exemple: \"uid=%%uid\"", "Test Loginname" : "Loginname de test", "Verify settings" : "Tester les paramètres", "1. Server" : "1. Serveur", @@ -187,7 +190,7 @@ OC.L10N.register( "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "La chaîne %uid est manquante. Cette chaîne est remplacée par l'identifiant de connexion lors des requêtes LDAP / AD.", "Verify settings and count groups" : "Vérifier les paramètres et compter les groupes", "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Autoriser le login avec le nom d'utilisateur LDAP / AD (uid ou samaccountname, la détection est automatique). ", - "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Autoriser le login avec une adresse mail. Mail et mailPrimaryAddress sont autorisés.", + "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Autoriser l'authentification par adresse e-mail. Mail et mailPrimaryAddress sont autorisés.", "Defines the filter to apply, when login is attempted. %%uid replaces the username in the login action. Example: \"uid=%%uid\"" : "Définit le filtre à appliquer lors d'une tentative de connexion. %%uid remplace le nom d'utilisateur. Exemple : \"uid=%%uid\"", "Add a new and blank configuration" : "Ajouter une nouvelle configuration vierge", "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Vous pouvez omettre le protocole, sauf si vous avez besoin de SSL. Dans ce cas, préfixez avec ldaps://", diff --git a/apps/user_ldap/l10n/fr.json b/apps/user_ldap/l10n/fr.json index 784008a09a1..5b72a01f6cf 100644 --- a/apps/user_ldap/l10n/fr.json +++ b/apps/user_ldap/l10n/fr.json @@ -77,8 +77,11 @@ "Verify settings and count the groups" : "Vérifier les paramètres et compter les groupes", "When logging in, %s will find the user based on the following attributes:" : "Au login, %s cherchera l'utilisateur sur base de ces attributs :", "LDAP / AD Username:" : "Nom d'utilisateur LDAP / AD :", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Autorise l'authentification à partir du nom d'utilisateur LDAP / AD.Celui-ci sera détecté et pourra être soit \"uid\", soit \"sAMAccountName\".", "LDAP / AD Email Address:" : "Adresse mail LDAP / AD :", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Autorise l'authentification par adresse e-mail. \"mail\" et \"mailPrimaryAddress\" sont autorisés.", "Other Attributes:" : "Autres attributs :", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Définit le filtre à appliquer lors de la tentative de connexion. \"%%uid\" remplace le nom d'utilisateur lors de l'authentification. Exemple: \"uid=%%uid\"", "Test Loginname" : "Loginname de test", "Verify settings" : "Tester les paramètres", "1. Server" : "1. Serveur", @@ -185,7 +188,7 @@ "The %uid placeholder is missing. It will be replaced with the login name when querying LDAP / AD." : "La chaîne %uid est manquante. Cette chaîne est remplacée par l'identifiant de connexion lors des requêtes LDAP / AD.", "Verify settings and count groups" : "Vérifier les paramètres et compter les groupes", "Allows login against the LDAP / AD username, which is either uid or samaccountname and will be detected." : "Autoriser le login avec le nom d'utilisateur LDAP / AD (uid ou samaccountname, la détection est automatique). ", - "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Autoriser le login avec une adresse mail. Mail et mailPrimaryAddress sont autorisés.", + "Allows login against an email attribute. Mail and mailPrimaryAddress will be allowed." : "Autoriser l'authentification par adresse e-mail. Mail et mailPrimaryAddress sont autorisés.", "Defines the filter to apply, when login is attempted. %%uid replaces the username in the login action. Example: \"uid=%%uid\"" : "Définit le filtre à appliquer lors d'une tentative de connexion. %%uid remplace le nom d'utilisateur. Exemple : \"uid=%%uid\"", "Add a new and blank configuration" : "Ajouter une nouvelle configuration vierge", "You can omit the protocol, except you require SSL. Then start with ldaps://" : "Vous pouvez omettre le protocole, sauf si vous avez besoin de SSL. Dans ce cas, préfixez avec ldaps://", diff --git a/apps/user_ldap/l10n/pt_BR.js b/apps/user_ldap/l10n/pt_BR.js index 5491eeeb9c1..a9299cb8c6a 100644 --- a/apps/user_ldap/l10n/pt_BR.js +++ b/apps/user_ldap/l10n/pt_BR.js @@ -79,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Verificar configurações e contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Ao entrar, %s vai encontrar o usuário com base nos seguintes atributos:", "LDAP / AD Username:" : "Nome do usuário LDAP / AD:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Permite login com o nome de usuário LDAP / AD, o qual é \"uid\" ou \"sAMAccountName\" e será detectado.", "LDAP / AD Email Address:" : "Endereço de e-mail LDAP / AD:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Permite login com um atributo de email. \"Mail\" e \"mailPrimaryAddress\" são permitidos.", "Other Attributes:" : "Outros Atributos:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Define o filtro a aplicar quando o login é tentado. \"%%uid\" substitui o nome de usuário durante o login. Por exemplo: \"uid=%%uid\"", "Test Loginname" : "Testar Loginname", "Verify settings" : "Verificar configurações", "1. Server" : "1. Servidor", diff --git a/apps/user_ldap/l10n/pt_BR.json b/apps/user_ldap/l10n/pt_BR.json index 62ba88e15fc..fa5352490a9 100644 --- a/apps/user_ldap/l10n/pt_BR.json +++ b/apps/user_ldap/l10n/pt_BR.json @@ -77,8 +77,11 @@ "Verify settings and count the groups" : "Verificar configurações e contar grupos", "When logging in, %s will find the user based on the following attributes:" : "Ao entrar, %s vai encontrar o usuário com base nos seguintes atributos:", "LDAP / AD Username:" : "Nome do usuário LDAP / AD:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "Permite login com o nome de usuário LDAP / AD, o qual é \"uid\" ou \"sAMAccountName\" e será detectado.", "LDAP / AD Email Address:" : "Endereço de e-mail LDAP / AD:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "Permite login com um atributo de email. \"Mail\" e \"mailPrimaryAddress\" são permitidos.", "Other Attributes:" : "Outros Atributos:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Define o filtro a aplicar quando o login é tentado. \"%%uid\" substitui o nome de usuário durante o login. Por exemplo: \"uid=%%uid\"", "Test Loginname" : "Testar Loginname", "Verify settings" : "Verificar configurações", "1. Server" : "1. Servidor", diff --git a/apps/user_ldap/l10n/tr.js b/apps/user_ldap/l10n/tr.js index 8e525c134f9..975b32a8d11 100644 --- a/apps/user_ldap/l10n/tr.js +++ b/apps/user_ldap/l10n/tr.js @@ -79,8 +79,11 @@ OC.L10N.register( "Verify settings and count the groups" : "Ayarları doğrula ve grupları say", "When logging in, %s will find the user based on the following attributes:" : "Oturum açılırken, %s, aşağıdaki özniteliklere bağlı kullanıcıyı bulur:", "LDAP / AD Username:" : "LDAP / AD Kullanıcı Adı:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "LDAP / AD kullanıcı adı ile oturum açılmasını sağlar. Kullanıcı adı \"uid\" ya da \"sAMAccountName\" olabilir ve algılanır.", "LDAP / AD Email Address:" : "LDAP / AD E-posta Adresi:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "E-posta adresi ile oturum açılmasını sağlar. \"mail\" ve \"mailPrimaryAddress\" kullanılabilir.", "Other Attributes:" : "Diğer Öznitelikler:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Oturum açma girişiminde uygulanacak süzgeci tanımlar. Oturum açma işleminde \"%%uid\" kullanıcı adı ile değiştirilir. Örnek: \"uid=%%uid\"", "Test Loginname" : "Kullanıcı adını sına", "Verify settings" : "Ayarları doğrula", "1. Server" : "1. Sunucu", diff --git a/apps/user_ldap/l10n/tr.json b/apps/user_ldap/l10n/tr.json index 581bd1419bb..8b326bfb0bf 100644 --- a/apps/user_ldap/l10n/tr.json +++ b/apps/user_ldap/l10n/tr.json @@ -77,8 +77,11 @@ "Verify settings and count the groups" : "Ayarları doğrula ve grupları say", "When logging in, %s will find the user based on the following attributes:" : "Oturum açılırken, %s, aşağıdaki özniteliklere bağlı kullanıcıyı bulur:", "LDAP / AD Username:" : "LDAP / AD Kullanıcı Adı:", + "Allows login against the LDAP / AD username, which is either \"uid\" or \"sAMAccountName\" and will be detected." : "LDAP / AD kullanıcı adı ile oturum açılmasını sağlar. Kullanıcı adı \"uid\" ya da \"sAMAccountName\" olabilir ve algılanır.", "LDAP / AD Email Address:" : "LDAP / AD E-posta Adresi:", + "Allows login against an email attribute. \"mail\" and \"mailPrimaryAddress\" allowed." : "E-posta adresi ile oturum açılmasını sağlar. \"mail\" ve \"mailPrimaryAddress\" kullanılabilir.", "Other Attributes:" : "Diğer Öznitelikler:", + "Defines the filter to apply, when login is attempted. \"%%uid\" replaces the username in the login action. Example: \"uid=%%uid\"" : "Oturum açma girişiminde uygulanacak süzgeci tanımlar. Oturum açma işleminde \"%%uid\" kullanıcı adı ile değiştirilir. Örnek: \"uid=%%uid\"", "Test Loginname" : "Kullanıcı adını sına", "Verify settings" : "Ayarları doğrula", "1. Server" : "1. Sunucu", |