Adds support for Git's smart HTTP protocol to Redmine.pm (#4905).

git-svn-id: svn+ssh://rubyforge.org/var/svn/redmine/trunk@9829 e93f8b46-1217-0410-a6f0-8f06a7374b81

1 files changed, 114 insertions, 3 deletions

diff --git a/extra/svn/Redmine.pm b/extra/svn/Redmine.pm
index fbaf177a3..a370c3a47 100644
--- a/extra/svn/Redmine.pm
+++ b/extra/svn/Redmine.pm
@@ -102,6 +102,83 @@ S<them :>
 
 And you need to upgrade at least reposman.rb (after r860).
 
+=head1 GIT SMART HTTP SUPPORT
+
+Git's smart HTTP protocol (available since Git 1.7.0) will not work with the
+above settings. Redmine.pm normally does access control depending on the HTTP
+method used: read-only methods are OK for everyone in public projects and
+members with read rights in private projects. The rest require membership with
+commit rights in the project.
+
+However, this scheme doesn't work for Git's smart HTTP protocol, as it will use
+POST even for a simple clone. Instead, read-only requests must be detected using
+the full URL (including the query string): anything that doesn't belong to the
+git-receive-pack service is read-only.
+
+To activate this mode of operation, add this line inside your <Location /git>
+block:
+
+  RedmineGitSmartHttp yes
+
+Here's a sample Apache configuration which integrates git-http-backend with
+a MySQL database and this new option:
+
+   SetEnv GIT_PROJECT_ROOT /var/www/git/
+   SetEnv GIT_HTTP_EXPORT_ALL
+   ScriptAlias /git/ /usr/libexec/git-core/git-http-backend/
+   <Location /git>
+       Order allow,deny
+       Allow from all
+
+       AuthType Basic
+       AuthName Git
+       Require valid-user
+
+       PerlAccessHandler Apache::Authn::Redmine::access_handler
+       PerlAuthenHandler Apache::Authn::Redmine::authen_handler
+       # for mysql
+       RedmineDSN "DBI:mysql:database=redmine;host=127.0.0.1"
+       RedmineDbUser "redmine"
+       RedmineDbPass "xxx"
+       RedmineGitSmartHttp yes
+    </Location>
+
+Make sure that all the names of the repositories under /var/www/git/ have a
+matching identifier for some project: /var/www/git/myproject and
+/var/www/git/myproject.git will work. You can put both bare and non-bare
+repositories in /var/www/git, though bare repositories are strongly
+recommended. You should create them with the rights of the user running Redmine,
+like this:
+
+  cd /var/www/git
+  sudo -u user-running-redmine mkdir myproject
+  cd myproject
+  sudo -u user-running-redmine git init --bare
+
+Once you have activated this option, you have three options when cloning a
+repository:
+
+- Cloning using "http://user@host/git/repo(.git)" works, but will ask for the password
+  all the time.
+
+- Cloning with "http://user:pass@host/git/repo(.git)" does not have this problem, but
+  this could reveal accidentally your password to the console in some versions
+  of Git, and you would have to ensure that .git/config is not readable except
+  by the owner for each of your projects.
+
+- Use "http://host/git/repo(.git)", and store your credentials in the ~/.netrc
+  file. This is the recommended solution, as you only have one file to protect
+  and passwords will not be leaked accidentally to the console.
+
+  IMPORTANT NOTE: It is *very important* that the file cannot be read by other
+  users, as it will contain your password in cleartext. To create the file, you
+  can use the following commands, replacing yourhost, youruser and yourpassword
+  with the right values:
+
+    touch ~/.netrc
+    chmod 600 ~/.netrc
+    echo -e "machine yourhost\nlogin youruser\npassword yourpassword" > ~/.netrc
+
 =cut
 
 use strict;
@@ -151,6 +228,11 @@ my @directives = (
     args_how => TAKE1,
     errmsg => 'RedmineCacheCredsMax must be decimal number',
   },
+  {
+    name => 'RedmineGitSmartHttp',
+    req_override => OR_AUTHCFG,
+    args_how => TAKE1,
+  },
 );
 
 sub RedmineDSN {
@@ -188,6 +270,17 @@ sub RedmineCacheCredsMax {
   }
 }
 
+sub RedmineGitSmartHttp {
+  my ($self, $parms, $arg) = @_;
+  $arg = lc $arg;
+
+  if ($arg eq "yes" || $arg eq "true") {
+    $self->{RedmineGitSmartHttp} = 1;
+  } else {
+    $self->{RedmineGitSmartHttp} = 0;
+  }
+}
+
 sub trim {
   my $string = shift;
   $string =~ s/\s{2,}/ /g;
@@ -204,6 +297,23 @@ Apache2::Module::add(__PACKAGE__, \@directives);
 
 my %read_only_methods = map { $_ => 1 } qw/GET PROPFIND REPORT OPTIONS/;
 
+sub request_is_read_only {
+  my ($r) = @_;
+  my $cfg = Apache2::Module::get_config(__PACKAGE__, $r->server, $r->per_dir_config);
+
+  # Do we use Git's smart HTTP protocol, or not?
+  if (defined $cfg->{RedmineGitSmartHttp} and $cfg->{RedmineGitSmartHttp}) {
+    my $uri = $r->unparsed_uri;
+    my $location = $r->location;
+    my $is_read_only = $uri !~ m{^$location/*[^/]+/+(info/refs\?service=)?git\-receive\-pack$}o;
+    return $is_read_only;
+  } else {
+    # Standard behaviour: check the HTTP method
+    my $method = $r->method;
+    return defined $read_only_methods{$method};
+  }
+}
+
 sub access_handler {
   my $r = shift;
 
@@ -212,8 +322,7 @@ sub access_handler {
       return FORBIDDEN;
   }
 
-  my $method = $r->method;
-  return OK unless defined $read_only_methods{$method};
+  return OK unless request_is_read_only($r);
 
   my $project_id = get_project_identifier($r);
 
@@ -338,7 +447,7 @@ sub is_member {
 
   my $pass_digest = Digest::SHA::sha1_hex($redmine_pass);
 
-  my $access_mode = defined $read_only_methods{$r->method} ? "R" : "W";
+  my $access_mode = request_is_read_only($r) ? "R" : "W";
 
   my $cfg = Apache2::Module::get_config(__PACKAGE__, $r->server, $r->per_dir_config);
   my $usrprojpass;
@@ -414,7 +523,9 @@ sub is_member {
 sub get_project_identifier {
     my $r = shift;
 
+    my $cfg = Apache2::Module::get_config(__PACKAGE__, $r->server, $r->per_dir_config);
     my $location = $r->location;
+    $location =~ s/\.git$// if (defined $cfg->{RedmineGitSmartHttp} and $cfg->{RedmineGitSmartHttp});
     my ($identifier) = $r->uri =~ m{$location/*([^/.]+)};
     $identifier;
 }