SONAR-11804 remove 32-bits wrapper and service binaries

10 files changed, 0 insertions, 819 deletions

diff --git a/sonar-application/src/main/assembly/bin/linux-x86-32/lib/libwrapper.so b/sonar-application/src/main/assembly/bin/linux-x86-32/lib/libwrapper.so
deleted file mode 100755
index 2cc4ab3cebe..00000000000
--- a/sonar-application/src/main/assembly/bin/linux-x86-32/lib/libwrapper.so
+++ /dev/null
diff --git a/sonar-application/src/main/assembly/bin/linux-x86-32/sonar.sh b/sonar-application/src/main/assembly/bin/linux-x86-32/sonar.sh
deleted file mode 100755
index 9bb17e6cf3f..00000000000
--- a/sonar-application/src/main/assembly/bin/linux-x86-32/sonar.sh
+++ /dev/null
@@ -1,564 +0,0 @@
-#! /bin/sh
-
-#
-# Copyright (c) 1999, 2006 Tanuki Software Inc.
-#
-# Java Service Wrapper sh script.  Suitable for starting and stopping
-#  wrapped Java applications on UNIX platforms.
-#
-
-#-----------------------------------------------------------------------------
-# These settings can be modified to fit the needs of your application
-
-# Default values for the Application variables, below. 
-# 
-# NOTE: The build for specific applications may override this during the resource-copying
-# phase, to fill in a concrete name and avoid the use of the defaults specified here.
-DEF_APP_NAME="SonarQube"
-DEF_APP_LONG_NAME="SonarQube"
-
-# Application
-APP_NAME="${DEF_APP_NAME}"
-APP_LONG_NAME="${DEF_APP_LONG_NAME}"
-
-# Wrapper
-WRAPPER_CMD="./wrapper"
-WRAPPER_CONF="../../conf/wrapper.conf"
-
-# Priority at which to run the wrapper.  See "man nice" for valid priorities.
-#  nice is only used if a priority is specified.
-PRIORITY=
-
-# Location of the pid file.
-PIDDIR="."
-
-# If uncommented, causes the Wrapper to be shutdown using an anchor file.
-#  When launched with the 'start' command, it will also ignore all INT and
-#  TERM signals.
-#IGNORE_SIGNALS=true
-
-# If specified, the Wrapper will be run as the specified user.
-# IMPORTANT - Make sure that the user has the required privileges to write
-#  the PID file and wrapper.log files.  Failure to be able to write the log
-#  file will cause the Wrapper to exit without any way to write out an error
-#  message.
-# NOTE - This will set the user which is used to run the Wrapper as well as
-#  the JVM and is not useful in situations where a privileged resource or
-#  port needs to be allocated prior to the user being changed.
-#RUN_AS_USER=
-
-# The following two lines are used by the chkconfig command. Change as is
-#  appropriate for your application.  They should remain commented.
-# chkconfig: 2345 20 80
-# description: Test Wrapper Sample Application
-
-# Do not modify anything beyond this point
-#-----------------------------------------------------------------------------
-
-# Get the fully qualified path to the script
-case $0 in
-    /*)
-        SCRIPT="$0"
-        ;;
-    *)
-        PWD=`pwd`
-        SCRIPT="$PWD/$0"
-        ;;
-esac
-
-# Resolve the true real path without any sym links.
-CHANGED=true
-while [ "X$CHANGED" != "X" ]
-do
-    # Change spaces to ":" so the tokens can be parsed.
-    SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
-    # Get the real path to this script, resolving any symbolic links
-    TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'`
-    REALPATH=
-    for C in $TOKENS; do
-        # Change any ":" in the token back to a space.
-        C=`echo $C | sed -e 's;:; ;g'`
-        REALPATH="$REALPATH/$C"
-        # If REALPATH is a sym link, resolve it.  Loop for nested links.
-        while [ -h "$REALPATH" ] ; do
-            LS="`ls -ld "$REALPATH"`"
-            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
-            if expr "$LINK" : '/.*' > /dev/null; then
-                # LINK is absolute.
-                REALPATH="$LINK"
-            else
-                # LINK is relative.
-                REALPATH="`dirname "$REALPATH"`""/$LINK"
-            fi
-        done
-    done
-
-    if [ "$REALPATH" = "$SCRIPT" ]
-    then
-        CHANGED=""
-    else
-        SCRIPT="$REALPATH"
-    fi
-done
-
-# Change the current directory to the location of the script
-cd "`dirname "$REALPATH"`"
-REALDIR=`pwd`
-
-# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
-#  the working directory is later changed.
-FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    PIDDIR=$REALDIR/$PIDDIR
-fi
-# Same test for WRAPPER_CMD
-FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
-fi
-# Same test for WRAPPER_CONF
-FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
-if [ "$FIRST_CHAR" != "/" ]
-then
-    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
-fi
-
-# Process ID
-ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
-PIDFILE="$PIDDIR/$APP_NAME.pid"
-LOCKDIR="/var/lock/subsys"
-LOCKFILE="$LOCKDIR/$APP_NAME"
-pid=""
-
-# Resolve the location of the 'ps' command
-PSEXE="/usr/bin/ps"
-if [ ! -x "$PSEXE" ]
-then
-    PSEXE="/bin/ps"
-    if [ ! -x "$PSEXE" ]
-    then
-        echo "Unable to locate 'ps'."
-        echo "Please report this message along with the location of the command on your system."
-        exit 1
-    fi
-fi
-
-# Resolve the os
-DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
-case "$DIST_OS" in
-    'sunos')
-        DIST_OS="solaris"
-        ;;
-    'hp-ux' | 'hp-ux64')
-        DIST_OS="hpux"
-        ;;
-    'darwin')
-        DIST_OS="macosx"
-        ;;
-    'unix_sv')
-        DIST_OS="unixware"
-        ;;
-esac
-
-# Resolve the architecture
-DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]`
-if [ "$DIST_ARCH" = "unknown" ]
-then
-    DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
-fi
-case "$DIST_ARCH" in
-    'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
-        DIST_ARCH="x86"
-        ;;
-    'ip27')
-        DIST_ARCH="mips"
-        ;;
-    'power' | 'powerpc' | 'power_pc' | 'ppc64')
-        DIST_ARCH="ppc"
-        ;;
-    'pa_risc' | 'pa-risc')
-        DIST_ARCH="parisc"
-        ;;
-    'sun4u' | 'sparcv9')
-        DIST_ARCH="sparc"
-        ;;
-    '9000/800')
-        DIST_ARCH="parisc"
-        ;;
-esac
-
-outputFile() {
-    if [ -f "$1" ]
-    then
-        echo "  $1 (Found but not executable.)";
-    else
-        echo "  $1"
-    fi
-}
-
-# Decide on the wrapper binary to use.
-# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit
-#  platforms, if the 64-bit binary exists then the distribution most
-#  likely wants to use long names.  Otherwise, look for the default.
-# For macosx, we also want to look for universal binaries.
-WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
-if [ -x "$WRAPPER_TEST_CMD" ]
-then
-    WRAPPER_CMD="$WRAPPER_TEST_CMD"
-else
-    if [ "$DIST_OS" = "macosx" ]
-    then
-        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32"
-        if [ -x "$WRAPPER_TEST_CMD" ]
-        then
-            WRAPPER_CMD="$WRAPPER_TEST_CMD"
-        else
-            WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-            if [ -x "$WRAPPER_TEST_CMD" ]
-            then
-                WRAPPER_CMD="$WRAPPER_TEST_CMD"
-            else
-                WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64"
-                if [ -x "$WRAPPER_TEST_CMD" ]
-                then
-                    WRAPPER_CMD="$WRAPPER_TEST_CMD"
-                else
-                    if [ ! -x "$WRAPPER_CMD" ]
-                    then
-                        echo "Unable to locate any of the following binaries:"
-                        outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
-                        outputFile "$WRAPPER_CMD-$DIST_OS-universal-32"
-                        outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-                        outputFile "$WRAPPER_CMD-$DIST_OS-universal-64"
-                        outputFile "$WRAPPER_CMD"
-                        exit 1
-                    fi
-                fi
-            fi
-        fi
-    else
-        WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-        if [ -x "$WRAPPER_TEST_CMD" ]
-        then
-            WRAPPER_CMD="$WRAPPER_TEST_CMD"
-        else
-            if [ ! -x "$WRAPPER_CMD" ]
-            then
-                echo "Unable to locate any of the following binaries:"
-                outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
-                outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
-                outputFile "$WRAPPER_CMD"
-                exit 1
-            fi
-        fi
-    fi
-fi
-
-# Build the nice clause
-if [ "X$PRIORITY" = "X" ]
-then
-    CMDNICE=""
-else
-    CMDNICE="nice -$PRIORITY"
-fi
-
-# Build the anchor file clause.
-if [ "X$IGNORE_SIGNALS" = "X" ]
-then
-   ANCHORPROP=
-   IGNOREPROP=
-else
-   ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\"
-   IGNOREPROP=wrapper.ignore_signals=TRUE
-fi
-
-# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
-LOCKPROP=
-if [ -d $LOCKDIR ]
-then
-    if [ -w $LOCKDIR ]
-    then
-        LOCKPROP=wrapper.lockfile=\"$LOCKFILE\"
-    fi
-fi
-
-checkUser() {
-    # $1 touchLock flag
-    # $2 command
-
-    # Check the configured user.  If necessary rerun this script as the desired user.
-    if [ "X$RUN_AS_USER" != "X" ]
-    then
-        # Resolve the location of the 'id' command
-        IDEXE="/usr/xpg4/bin/id"
-        if [ ! -x "$IDEXE" ]
-        then
-            IDEXE="/usr/bin/id"
-            if [ ! -x "$IDEXE" ]
-            then
-                echo "Unable to locate 'id'."
-                echo "Please report this message along with the location of the command on your system."
-                exit 1
-            fi
-        fi
-    
-        if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
-        then
-            # Already running as the configured user.  Avoid password prompts by not calling su.
-            RUN_AS_USER=""
-        fi
-    fi
-    if [ "X$RUN_AS_USER" != "X" ]
-    then
-        # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
-        # able to create the lock file.  The Wrapper will be able to update this file once it
-        # is created but will not be able to delete it on shutdown.  If $2 is defined then
-        # the lock file should be created for the current command
-        if [ "X$LOCKPROP" != "X" ]
-        then
-            if [ "X$1" != "X" ]
-            then
-                # Resolve the primary group 
-                RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
-                if [ "X$RUN_AS_GROUP" = "X" ]
-                then
-                    RUN_AS_GROUP=$RUN_AS_USER
-                fi
-                touch $LOCKFILE
-                chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
-            fi
-        fi
-
-        # Still want to change users, recurse.  This means that the user will only be
-        #  prompted for a password once. Variables shifted by 1
-        su -m $RUN_AS_USER -c "\"$REALPATH\" $2"
-        RETVAL=$?
-
-        # Now that we are the original user again, we may need to clean up the lock file.
-        if [ "X$LOCKPROP" != "X" ]
-        then
-            getpid
-            if [ "X$pid" = "X" ]
-            then
-                # Wrapper is not running so make sure the lock file is deleted.
-                if [ -f "$LOCKFILE" ]
-                then
-                    rm "$LOCKFILE"
-                fi
-            fi
-        fi
-
-        exit $RETVAL
-    fi
-}
-
-getpid() {
-    if [ -f "$PIDFILE" ]
-    then
-        if [ -r "$PIDFILE" ]
-        then
-            pid=`cat "$PIDFILE"`
-            if [ "X$pid" != "X" ]
-            then
-                # It is possible that 'a' process with the pid exists but that it is not the
-                #  correct process.  This can happen in a number of cases, but the most
-                #  common is during system startup after an unclean shutdown.
-                # The ps statement below looks for the specific wrapper command running as
-                #  the pid.  If it is not found then the pid file is considered to be stale.
-                pidtest=`$PSEXE -p $pid -o args | grep "$WRAPPER_CMD" | tail -1`
-                if [ "X$pidtest" = "X" ]
-                then
-                    # This is a stale pid file.
-                    rm -f "$PIDFILE"
-                    echo "Removed stale pid file: $PIDFILE"
-                    pid=""
-                fi
-            fi
-        else
-            echo "Cannot read $PIDFILE."
-            exit 1
-        fi
-    fi
-}
-
-testpid() {
-    pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
-    if [ "X$pid" = "X" ]
-    then
-        # Process is gone so remove the pid file.
-        rm -f "$PIDFILE"
-        pid=""
-    fi
-}
-
-console() {
-    echo "Running $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        # The string passed to eval must handles spaces in paths correctly.
-        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP"
-        eval $COMMAND_LINE
-    else
-        echo "$APP_LONG_NAME is already running."
-        exit 1
-    fi
-}
- 
-start() {
-    echo "Starting $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        # The string passed to eval must handles spaces in paths correctly.
-        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
-        eval $COMMAND_LINE
-    else
-        echo "$APP_LONG_NAME is already running."
-        exit 1
-    fi
-    getpid
-    if [ "X$pid" != "X" ]
-    then
-        echo "Started $APP_LONG_NAME."
-    else
-        echo "Failed to start $APP_LONG_NAME."
-    fi    
-}
- 
-stopit() {
-    echo "Stopping $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME was not running."
-    else
-        if [ "X$IGNORE_SIGNALS" = "X" ]
-        then
-            # Running so try to stop it.
-            kill $pid
-            if [ $? -ne 0 ]
-            then
-                # An explanation for the failure should have been given
-                echo "Unable to stop $APP_LONG_NAME."
-                exit 1
-            fi
-        else
-            rm -f "$ANCHORFILE"
-            if [ -f "$ANCHORFILE" ]
-            then
-                # An explanation for the failure should have been given
-                echo "Unable to stop $APP_LONG_NAME."
-                exit 1
-            fi
-        fi
-
-        # We can not predict how long it will take for the wrapper to
-        #  actually stop as it depends on settings in wrapper.conf.
-        #  Loop until it does.
-        savepid=$pid
-        CNT=0
-        TOTCNT=0
-        while [ "X$pid" != "X" ]
-        do
-            # Show a waiting message every 5 seconds.
-            if [ "$CNT" -lt "5" ]
-            then
-                CNT=`expr $CNT + 1`
-            else
-                echo "Waiting for $APP_LONG_NAME to exit..."
-                CNT=0
-            fi
-            TOTCNT=`expr $TOTCNT + 1`
-
-            sleep 1
-
-            testpid
-        done
-
-        pid=$savepid
-        testpid
-        if [ "X$pid" != "X" ]
-        then
-            echo "Failed to stop $APP_LONG_NAME."
-            exit 1
-        else
-            echo "Stopped $APP_LONG_NAME."
-        fi
-    fi
-}
-
-status() {
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME is not running."
-        exit 1
-    else
-        echo "$APP_LONG_NAME is running ($pid)."
-        exit 0
-    fi
-}
-
-dump() {
-    echo "Dumping $APP_LONG_NAME..."
-    getpid
-    if [ "X$pid" = "X" ]
-    then
-        echo "$APP_LONG_NAME was not running."
-
-    else
-        kill -3 $pid
-
-        if [ $? -ne 0 ]
-        then
-            echo "Failed to dump $APP_LONG_NAME."
-            exit 1
-        else
-            echo "Dumped $APP_LONG_NAME."
-        fi
-    fi
-}
-
-case "$1" in
-
-    'console')
-        checkUser touchlock $1
-        console
-        ;;
-
-    'start')
-        checkUser touchlock $1
-        start
-        ;;
-
-    'stop')
-        checkUser "" $1
-        stopit
-        ;;
-
-    'restart')
-        checkUser touchlock $1
-        stopit
-        start
-        ;;
-
-    'status')
-        checkUser "" $1
-        status
-        ;;
-
-    'dump')
-        checkUser "" $1
-        dump
-        ;;
-
-    *)
-        echo "Usage: $0 { console | start | stop | restart | status | dump }"
-        exit 1
-        ;;
-esac
-
-exit 0
diff --git a/sonar-application/src/main/assembly/bin/linux-x86-32/wrapper b/sonar-application/src/main/assembly/bin/linux-x86-32/wrapper
deleted file mode 100755
index 7e0064596e2..00000000000
--- a/sonar-application/src/main/assembly/bin/linux-x86-32/wrapper
+++ /dev/null
diff --git a/sonar-application/src/main/assembly/bin/windows-x86-32/InstallNTService.bat b/sonar-application/src/main/assembly/bin/windows-x86-32/InstallNTService.bat
deleted file mode 100755
index 1285156c340..00000000000
--- a/sonar-application/src/main/assembly/bin/windows-x86-32/InstallNTService.bat
+++ /dev/null
@@ -1,50 +0,0 @@
-@echo off
-setlocal
-
-rem Copyright (c) 1999, 2006 Tanuki Software Inc.
-rem
-rem Java Service Wrapper general NT service install script
-rem
-
-if "%OS%"=="Windows_NT" goto nt
-echo This script only works with NT-based versions of Windows.
-goto :eof
-
-:nt
-rem
-rem Find the application home.
-rem
-rem %~dp0 is location of current script under NT
-set _REALPATH=%~dp0
-
-rem Decide on the wrapper binary.
-set _WRAPPER_BASE=wrapper
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%.exe
-if exist "%_WRAPPER_EXE%" goto conf
-echo Unable to locate a Wrapper executable using any of the following names:
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-echo %_REALPATH%%_WRAPPER_BASE%.exe
-pause
-goto :eof
-
-rem
-rem Find the wrapper.conf
-rem
-:conf
-set _WRAPPER_CONF="%~f1"
-if not %_WRAPPER_CONF%=="" goto startup
-set _WRAPPER_CONF="%_REALPATH%..\..\conf\wrapper.conf"
-
-rem
-rem Install the Wrapper as an NT service.
-rem
-:startup
-"%_WRAPPER_EXE%" -i %_WRAPPER_CONF%
-if not errorlevel 1 goto :eof
-pause
-
diff --git a/sonar-application/src/main/assembly/bin/windows-x86-32/StartNTService.bat b/sonar-application/src/main/assembly/bin/windows-x86-32/StartNTService.bat
deleted file mode 100755
index a8bc27a062f..00000000000
--- a/sonar-application/src/main/assembly/bin/windows-x86-32/StartNTService.bat
+++ /dev/null
@@ -1,50 +0,0 @@
-@echo off
-setlocal
-
-rem Copyright (c) 1999, 2006 Tanuki Software Inc.
-rem
-rem Java Service Wrapper general NT service start script
-rem
-
-if "%OS%"=="Windows_NT" goto nt
-echo This script only works with NT-based versions of Windows.
-goto :eof
-
-:nt
-rem
-rem Find the application home.
-rem
-rem %~dp0 is location of current script under NT
-set _REALPATH=%~dp0
-
-rem Decide on the wrapper binary.
-set _WRAPPER_BASE=wrapper
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%.exe
-if exist "%_WRAPPER_EXE%" goto conf
-echo Unable to locate a Wrapper executable using any of the following names:
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-echo %_REALPATH%%_WRAPPER_BASE%.exe
-pause
-goto :eof
-
-rem
-rem Find the wrapper.conf
-rem
-:conf
-set _WRAPPER_CONF="%~f1"
-if not %_WRAPPER_CONF%=="" goto startup
-set _WRAPPER_CONF="%_REALPATH%..\..\conf\wrapper.conf"
-
-rem
-rem Start the Wrapper NT service.
-rem
-:startup
-"%_WRAPPER_EXE%" -t %_WRAPPER_CONF%
-if not errorlevel 1 goto :eof
-pause
-
diff --git a/sonar-application/src/main/assembly/bin/windows-x86-32/StartSonar.bat b/sonar-application/src/main/assembly/bin/windows-x86-32/StartSonar.bat
deleted file mode 100755
index 8a5c96f1dd7..00000000000
--- a/sonar-application/src/main/assembly/bin/windows-x86-32/StartSonar.bat
+++ /dev/null
@@ -1,55 +0,0 @@
-@echo off
-setlocal
-
-rem Copyright (c) 1999, 2006 Tanuki Software Inc.
-rem
-rem Java Service Wrapper general startup script
-rem
-
-rem
-rem Resolve the real path of the wrapper.exe
-rem  For non NT systems, the _REALPATH and _WRAPPER_CONF values
-rem  can be hard-coded below and the following test removed.
-rem
-if "%OS%"=="Windows_NT" goto nt
-echo This script only works with NT-based versions of Windows.
-goto :eof
-
-:nt
-rem
-rem Find the application home.
-rem
-rem %~dp0 is location of current script under NT
-set _REALPATH=%~dp0
-
-rem Decide on the wrapper binary.
-set _WRAPPER_BASE=wrapper
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%.exe
-if exist "%_WRAPPER_EXE%" goto conf
-echo Unable to locate a Wrapper executable using any of the following names:
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-echo %_REALPATH%%_WRAPPER_BASE%.exe
-pause
-goto :eof
-
-rem
-rem Find the wrapper.conf
-rem
-:conf
-set _WRAPPER_CONF="%~f1"
-if not %_WRAPPER_CONF%=="" goto startup
-set _WRAPPER_CONF="%_REALPATH%..\..\conf\wrapper.conf"
-
-rem
-rem Start the Wrapper
-rem
-:startup
-"%_WRAPPER_EXE%" -c %_WRAPPER_CONF%
-if not errorlevel 1 goto :eof
-pause
-
diff --git a/sonar-application/src/main/assembly/bin/windows-x86-32/StopNTService.bat b/sonar-application/src/main/assembly/bin/windows-x86-32/StopNTService.bat
deleted file mode 100755
index bf4b3ef4d38..00000000000
--- a/sonar-application/src/main/assembly/bin/windows-x86-32/StopNTService.bat
+++ /dev/null
@@ -1,50 +0,0 @@
-@echo off
-setlocal
-
-rem Copyright (c) 1999, 2006 Tanuki Software Inc.
-rem
-rem Java Service Wrapper general NT service stop script
-rem
-
-if "%OS%"=="Windows_NT" goto nt
-echo This script only works with NT-based versions of Windows.
-goto :eof
-
-:nt
-rem
-rem Find the application home.
-rem
-rem %~dp0 is location of current script under NT
-set _REALPATH=%~dp0
-
-rem Decide on the wrapper binary.
-set _WRAPPER_BASE=wrapper
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%.exe
-if exist "%_WRAPPER_EXE%" goto conf
-echo Unable to locate a Wrapper executable using any of the following names:
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-echo %_REALPATH%%_WRAPPER_BASE%.exe
-pause
-goto :eof
-
-rem
-rem Find the wrapper.conf
-rem
-:conf
-set _WRAPPER_CONF="%~f1"
-if not %_WRAPPER_CONF%=="" goto startup
-set _WRAPPER_CONF="%_REALPATH%..\..\conf\wrapper.conf"
-
-rem
-rem Stop the Wrapper NT service.
-rem
-:startup
-"%_WRAPPER_EXE%" -p %_WRAPPER_CONF%
-if not errorlevel 1 goto :eof
-pause
-
diff --git a/sonar-application/src/main/assembly/bin/windows-x86-32/UninstallNTService.bat b/sonar-application/src/main/assembly/bin/windows-x86-32/UninstallNTService.bat
deleted file mode 100755
index fd872824e96..00000000000
--- a/sonar-application/src/main/assembly/bin/windows-x86-32/UninstallNTService.bat
+++ /dev/null
@@ -1,50 +0,0 @@
-@echo off
-setlocal
-
-rem Copyright (c) 1999, 2006 Tanuki Software Inc.
-rem
-rem Java Service Wrapper general NT service uninstall script
-rem
-
-if "%OS%"=="Windows_NT" goto nt
-echo This script only works with NT-based versions of Windows.
-goto :eof
-
-:nt
-rem
-rem Find the application home.
-rem
-rem %~dp0 is location of current script under NT
-set _REALPATH=%~dp0
-
-rem Decide on the wrapper binary.
-set _WRAPPER_BASE=wrapper
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-if exist "%_WRAPPER_EXE%" goto conf
-set _WRAPPER_EXE=%_REALPATH%%_WRAPPER_BASE%.exe
-if exist "%_WRAPPER_EXE%" goto conf
-echo Unable to locate a Wrapper executable using any of the following names:
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-32.exe
-echo %_REALPATH%%_WRAPPER_BASE%-windows-x86-64.exe
-echo %_REALPATH%%_WRAPPER_BASE%.exe
-pause
-goto :eof
-
-rem
-rem Find the wrapper.conf
-rem
-:conf
-set _WRAPPER_CONF="%~f1"
-if not %_WRAPPER_CONF%=="" goto startup
-set _WRAPPER_CONF="%_REALPATH%..\..\conf\wrapper.conf"
-
-rem
-rem Uninstall the Wrapper as an NT service.
-rem
-:startup
-"%_WRAPPER_EXE%" -r %_WRAPPER_CONF%
-if not errorlevel 1 goto :eof
-pause
-
diff --git a/sonar-application/src/main/assembly/bin/windows-x86-32/lib/wrapper.dll b/sonar-application/src/main/assembly/bin/windows-x86-32/lib/wrapper.dll
deleted file mode 100755
index cb553c12340..00000000000
--- a/sonar-application/src/main/assembly/bin/windows-x86-32/lib/wrapper.dll
+++ /dev/null
diff --git a/sonar-application/src/main/assembly/bin/windows-x86-32/wrapper.exe b/sonar-application/src/main/assembly/bin/windows-x86-32/wrapper.exe
deleted file mode 100755
index b4cfc557c06..00000000000
--- a/sonar-application/src/main/assembly/bin/windows-x86-32/wrapper.exe
+++ /dev/null