Remove unused autotools build system

git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@4540 3789f03b-4d11-0410-bbf8-ca57d06f2519

9 files changed, 0 insertions, 205 deletions

diff --git a/po/Makevars b/po/Makevars
deleted file mode 100644
index 93e76d41..00000000
--- a/po/Makevars
+++ /dev/null
@@ -1,41 +0,0 @@
-# Makefile variables for PO directory in any package using GNU gettext.
-
-# Usually the message domain is the same as the package name.
-DOMAIN = $(PACKAGE)
-
-# These two variables depend on the location of this directory.
-subdir = po
-top_builddir = ..
-
-# These options get passed to xgettext.
-XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ --no-location
-
-# This is the copyright holder that gets inserted into the header of the
-# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
-# package.  (Note that the msgstr strings, extracted from the package's
-# sources, belong to the copyright holder of the package.)  Translators are
-# expected to transfer the copyright for their translations to this person
-# or entity, or to disclaim their copyright.  The empty string stands for
-# the public domain; in this case the translators are expected to disclaim
-# their copyright.
-COPYRIGHT_HOLDER = RealVNC Ltd, Constantin Kaplinsky, Peter Astrand, Cendio AB
-
-# This is the email address or URL to which the translators shall report
-# bugs in the untranslated strings:
-# - Strings which are not entire sentences, see the maintainer guidelines
-#   in the GNU gettext documentation, section 'Preparing Strings'.
-# - Strings which use unclear terms or require additional context to be
-#   understood.
-# - Strings which make invalid assumptions about notation of date, time or
-#   money.
-# - Pluralisation problems.
-# - Incorrect English spelling.
-# - Incorrect formatting.
-# It can be your email address, or a mailing list address where translators
-# can write to without being subscribed, or the URL of a web page through
-# which the translators can contact you.
-MSGID_BUGS_ADDRESS = tigervnc-devel@lists.sourceforge.net
-
-# This is the list of locale categories, beyond LC_MESSAGES, for which the
-# message catalogs shall be used.  It is usually empty.
-EXTRA_LOCALE_CATEGORIES =
diff --git a/po/POTFILES.in b/po/POTFILES.in
deleted file mode 100644
index 0704ba79..00000000
--- a/po/POTFILES.in
+++ /dev/null
@@ -1,12 +0,0 @@
-# vncviewer_unix
-unix/vncviewer/AboutDialog.h
-unix/vncviewer/CConn.cxx
-unix/vncviewer/CConn.h
-unix/vncviewer/DesktopWindow.cxx
-unix/vncviewer/DesktopWindow.h
-unix/vncviewer/InfoDialog.h
-unix/vncviewer/OptionsDialog.h
-unix/vncviewer/parameters.h
-unix/vncviewer/PasswdDialog.h
-unix/vncviewer/ServerDialog.h
-unix/vncviewer/vncviewer.cxx
diff --git a/po/Rules-quot b/po/Rules-quot
deleted file mode 100644
index 9c2a995e..00000000
--- a/po/Rules-quot
+++ /dev/null
@@ -1,47 +0,0 @@
-# Special Makefile rules for English message catalogs with quotation marks.
-
-DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
-
-.SUFFIXES: .insert-header .po-update-en
-
-en@quot.po-create:
-	$(MAKE) en@quot.po-update
-en@boldquot.po-create:
-	$(MAKE) en@boldquot.po-update
-
-en@quot.po-update: en@quot.po-update-en
-en@boldquot.po-update: en@boldquot.po-update-en
-
-.insert-header.po-update-en:
-	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
-	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	ll=`echo $$lang | sed -e 's/@.*//'`; \
-	LC_ALL=C; export LC_ALL; \
-	cd $(srcdir); \
-	if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "creation of $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-en@quot.insert-header: insert-header.sin
-	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
-
-en@boldquot.insert-header: insert-header.sin
-	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
-
-mostlyclean: mostlyclean-quot
-mostlyclean-quot:
-	rm -f *.insert-header
diff --git a/po/boldquot.sed b/po/boldquot.sed
deleted file mode 100644
index 4b937aa5..00000000
--- a/po/boldquot.sed
+++ /dev/null
@@ -1,10 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
-s/“/“/g
-s/”/”/g
-s/‘/‘/g
-s/’/’/g
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
deleted file mode 100644
index fedb6a06..00000000
--- a/po/en@boldquot.header
+++ /dev/null
@@ -1,25 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
-# This catalog furthermore displays the text between the quotation marks in
-# bold face, assuming the VT100/XTerm escape sequences.
-#
diff --git a/po/en@quot.header b/po/en@quot.header
deleted file mode 100644
index a9647fc3..00000000
--- a/po/en@quot.header
+++ /dev/null
@@ -1,22 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
diff --git a/po/insert-header.sin b/po/insert-header.sin
deleted file mode 100644
index b26de01f..00000000
--- a/po/insert-header.sin
+++ /dev/null
@@ -1,23 +0,0 @@
-# Sed script that inserts the file called HEADER before the header entry.
-#
-# At each occurrence of a line starting with "msgid ", we execute the following
-# commands. At the first occurrence, insert the file. At the following
-# occurrences, do nothing. The distinction between the first and the following
-# occurrences is achieved by looking at the hold space.
-/^msgid /{
-x
-# Test if the hold space is empty.
-s/m/m/
-ta
-# Yes it was empty. First occurrence. Read the file.
-r HEADER
-# Output the file's contents by reading the next line. But don't lose the
-# current line while doing this.
-g
-N
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
diff --git a/po/quot.sed b/po/quot.sed
deleted file mode 100644
index 0122c463..00000000
--- a/po/quot.sed
+++ /dev/null
@@ -1,6 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
deleted file mode 100644
index 2436c49e..00000000
--- a/po/remove-potcdate.sin
+++ /dev/null
@@ -1,19 +0,0 @@
-# Sed script that remove the POT-Creation-Date line in the header entry
-# from a POT file.
-#
-# The distinction between the first and the following occurrences of the
-# pattern is achieved by looking at the hold space.
-/^"POT-Creation-Date: .*"$/{
-x
-# Test if the hold space is empty.
-s/P/P/
-ta
-# Yes it was empty. First occurrence. Remove the line.
-g
-d
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}