---
title: Binding Data to Forms
order: 3
layout: page
---

[[datamodel.forms]]
= Binding Data to Forms

A typical application lets the user fill out structured data and maybe also browse previously entered data.
The data that is being entered is typically represented in code as an instance of a business object (bean), for instance a [classname]#Person# in an HR application.

Vaadin Framework provides a [classname]#Binder# class that the developer can use to define how the values in a business object should be bound to the fields shown in the user interface.
[classname]#Binder# takes care of reading values from the business object, validating the user's input, and converting the user's data between the format expected by the business object and the format expected by the field.

The first step to binding fields for a form is to create a [classname]#Binder# and bind some [classname]#Field# instances to it. You only need one [classname]#Binder# instance per form and use it for all fields in the form.

[source, java]
----
Binder<Person> binder = new Binder<>();

TextField titleField = new TextField();

// Start by defining the Field instance to use
binder.forField(titleField)
  // Finalize by doing the actual binding to the Person class
  .bind(
    // Callback that loads the title from a person instance
    Person::getTitle,
    // Callback that saves the title in a person instance
    Person::setTitle));

TextField nameField = new TextField();

// Shorthand for cases without extra configuration
binder.bind(nameField, Person::getName, Person::setName);
----

When we have bound field components using our binder, we can use the binder to load values from a person into the field, let the user edit the values and finally save the values back into a person instance.

[source, java]
----
// The person to edit
// Would be loaded from the backend in a real application
Person person = new Person("John Doe", 1957);

// Updates the value in each bound field component
binder.readBean(person);

Button saveButton = new Button("Save",
  event -> {
    try {
      binder.writeBean(person);
      // A real application would also save the updated person
      // using the application's backend
    } catch (BindingException e) {
      Notification.show("Person could not be saved, " +
        "please check error messages for each field.");
    }
});

// Updates the fields again with the previously saved values
Button resetButton = new Button("Reset",
  event -> binder.readBean(person));
----

With these basic steps, we have defined everything that is needed for loading, editing and saving values for a form.

The above example uses Java 8 method references for defining how field values are loaded and saved. It is also possible to use a lambda expression or an explicit instance of the callback interface instead of a method reference.

[source, java]
----
// With lambda expressions
binder.bind(titleField,
  person -> person.getTitle(),
  (person, title) -> person.setTitle(title));

// With explicit callback interface instances
binder.bind(nameField,
  new Function<Person, String>() {
    @Override
    public String apply(Person person) {
      return person.getName();
    }
  },
  new BiConsumer<Person, String>() {
    @Override
    public void accept(Person person, String name) {
      person.setName(name);
    }
  });
----

== Validating User Input

An application typically has some restrictions on exactly what kinds of values the user is allowed to enter into different fields.
[classname]#Binder# lets us define validators for each field that we are binding.
The validator is by default run whenever the user changes the value of a field, and the validation status is also checked again when saving.

Validators for a field are defined between the [methodname]#forField# and [methodname]#bind# steps when a binding is created.
A validator can be defined using an [classname]#Validator# instance or inline using a lambda expression.

[source, java]
----
binder.forField(emailField)
  // Explicit validator instance
  .withValidator(new EmailValidator(
    "This doesn't look like a valid email address"))
  .bind(Person::getEmail, Person::setEmail);

binder.forField(nameField)
  // Validator defined based on a lambda and an error message
  .withValidator(
    name -> name.length() >= 3,
    "Full name must contain at least three characters")
  .bind(Person::getName, Person::setName);

binder.forField(titleField)
  // Shorthand for requiring the field to be non-empty
  .setRequired("Every employee must have a title")
  .bind(Person::getTitle, Person::setTitle);
----

[NOTE]
[classname]#Binder#.[methodname]#forField# works like a builder where [methodname]#forField# starts the process, is followed by various configuration calls for the field and [methodname]#bind# acts as the finalizing method which applies the configuration.

The validation state of each field is updated whenever the user modifies the value of that field.
The validation state is by default shown using [classname]#Component#.[methodname]#setComponentError# which is used by the layout that the field is shown in. Whenever an error is set, the component will also get a `v-<component>-error` class name, e.g. `v-textfield-error`. This error class will by default add a red border on the component. Most built-in layouts will show the error state as a red exclamation mark icon next to the component, so that hovering or tapping the icon shows a tooltip with the message text.

We can also customize the way a binder displays error messages to get more flexibility than what  [methodname]#setComponentError# provides.
The easiest way of customizing this is to configure each binding to use its own [classname]#Label# that is used to show the status for each field.

[NOTE]
The status label is not only used for validation errors but also for showing confirmation and helper messages.

[source, java]
----
Label emailStatus = new Label();

binder.forField(emailField)
  .withValidator(new EmailValidator(
    "This doesn't look like a valid email address"))
  // Shorthand that updates the label based on the status
  .withStatusLabel(emailStatus)
  .bind(Person::getEmail, Person::setEmail);

Label nameStatus = new Label();

binder.forField(nameField)
  .withValidator(
    name -> name.length() >= 3,
    "Full name must contain at least three characters")
  .withValidationStatusHandler(status -> {
      nameStatus.setValue(status.getMessage().orElse(""));
      // Only show the label when validation has failed
      nameStatus.setVisible(status.isError());
    })
  .bind(Person::getName, Person::setName);
----

In addition to showing a validation errors, [classname]#Binder# can also be configured to show a positive confirmation message when validation has passed or a neutral helper message when there is no other message to show for that field.

[source, java]
----
binder.forField(titleField)
  .setRequired("Every employee must have a title")
  .withHelperMessage("The title is printed on business cards")
  .bind(Person::getTitle, Person::setTitle);

binder.forField(emailField)
  .withValidator(new EmailValidator(
    "This doesn't look like a valid email address"))
  .withConfirmationMessage(
    email -> email + " looks like a valid email address");
  .bind(Person::getEmail, Person::setEmail);

----

The previous example also shows that the message to show can be generated dynamically based on the field value using a lambda expression or an explicit [classname]#Function# instance.
The same way of defining the message is also available for other messages, such as any validation message.
Just as other messages, the confirmation message can also be set as a static [classname]#String#.

It is possible to add multiple validators for the same binding.
In such cases, each validator will be run in the defined order until encountering one validator that doesn't accept the input value.
The following example will first validate that the entered text looks like an email address, and only for seemingly valid email addresses it will continue checking that the email address is for the expected domain.

[source, java]
----
binder.forField(emailField)
  .withValidator(new EmailValidator(
    "This doesn't look like a valid email address"))
  .withValidator(
    email -> email.endsWith("@acme.com"),
    "Only acme.com email addresses are allowed")
  .bind(Person::getEmail, Person::setEmail);
----

In some cases, the validation of one field depends on the value of some other field.
We can save the binding to a local variable and trigger a revalidation when another field fires a value change event.

[source, java]
----
DateField departing = new DateField("Departing");
DateField returning = new DateField("Returning");

// Store return date binding so we can revalidate it later
Binding<Trip, LocalDate, LocalDate> returnBinding = binder.forField(returning)
  .withValidator(returnDate -> !returnDate.isBefore(departing.getValue()),
  "Cannot return before departing");
returnBinding.bind(Trip::getReturnDate, Trip::setReturnDate);

// Revalidate return date when departure date changes
departing.addValueChangeListener(event -> returnBinding.validate());
----

== Converting User Input

The data type of the used UI field component might not always match the type used by the application for the same data.
In some cases, there might be types specific for the application, such as custom type that encapsulates a postal code that the user enters through a [classname]#TextField#.
Another quite typical case is for entering integer numbers using a [classname]#TextField# or a [classname]#Slider#.
Similarly to validators, we can define a converter using a [classname]#Converter instance or inline using lambda expressions. We can optionally specify also an error message.

[source, java]
----
TextField yearOfBirthField = new TextField("Year of birth");

binder.forField(yearOfBirthField)
  .withConverter(
    new StringToIntegerConverter("Must enter a number"))
  .bind(Person::getYearOfBirth, Person::setYearOfBirth);

// Slider for integers between 1 and 10
Slider salaryLevelField = new Slider("Salary level", 1, 10);

binder.forField(salaryLevelField)
  .withConverter(Double::intValue, Integer::doubleValue)
  .bind(Person::getSalaryLevel, Person::setSalaryLevel);

----

We can freely mix validators and converters when defining a binding.
Any validator defined before a converter will be run using the unconverted value whereas a validator defined after a converter will be run using the converted value.
Correspondingly, the converter will only be run if all previous validators accept the user's value, and any validators defined after a converter will only be run if the conversion succeeded.

[NOTE]
A converter can be used as a validator but for code clarity and to avoid boilerplate code, you should use a validator when checking the contents and a converter when modifying the value.

[source, java]
----
binder.forField(yearOfBirthField)
  // Validator will be run with the String value of the field
  .withValidator(text -> text.length() == 4,
    "Doesn't look like a year")
  // Converter will only be run for strings with 4 characters
  .withConverter(
    new StringToIntegerConverter("Must enter a number"))
  // Validator will be run with the converted value
  .withValidator(year -> year >= 1900 && year < 2000,
    "Person must be born in the 20th century")
  .bind(Person::getYearOfBirth, Person::setYearOfBirth);
----

If the lambda expression used for converting the user-provided value throws an unchecked exception, then the field will be marked as invalid and the message of the exception will be used as the validation error message.
Messages in Java runtime exceptions are typically written with developers in mind and might not be suitable to show to end users.
We can provide a custom error message that is used whenever the conversion throws an unchecked exception.

[source, java]
----
binder.forField(yearOfBirthField)
  .withConverter(
    Integer::valueOf,
    String::valueOf,
    // Text to use instead of the NumberFormatException message
    "Please enter a number")
  .bind(Person::getYearOfBirth, Person::setYearOfBirth);
----

Another option is to directly implement the [interfacename]#Converter# interface where the conversion method returns a [interfacename]#Result# that can either be a converted value or an error message.

[source, java]
----
class MyConverter implements Converter<String, Integer> {
  @Override
  public Result<Integer> convertToModel(String fieldValue, Locale locale) {
    // Produces a converted value or an error
    try {
      // ok is a static helper method that creates a Result
      return Result.ok(Integer.valueOf(fieldValue));
    } catch (NumberFormatException e) {
      // error is a static helper method that creates a Result
      return Result.error("Please enter a number");
    }
  }

  @Override
  public String convertToPresentation(Integer integer, Locale locale) {
    // Converting to the field type should always succeed,
    // so there is no support for returning an error Result.
    return String.valueOf(integer);
  }
}

// Using the converter
binder.forField(yearOfBirthField)
  .withConverter(new MyConverter())
  .bind(Person::getYearOfBirth, Person::setYearOfBirth);
----

== Loading from and Saving to Business Objects

As shown in the introduction, the [classname]#Binder#.[methodname]#load# method is used for populating field values based on a business object and the [methodname]#save# method is used for writing values from the fields into a business object, provided validation and conversion passes.

A new form is often shown with empty default values.
To avoid showing lots of errors to the user, the validation error is not shown until the user edits each field after the form has been bound or loaded.
Helper and confirmation messages will still be shown right away when appropriate.

Even if the user has not edited a field, all validation error will be shown if we explicitly validate the form or try to save the values to a business object.

[source, java]
----
// Resets the form to show default values by populating the fields with the default values from the bean
binder.readBean(new Person());

// This will make all current validation errors visible
ValidationStatus<Person> status = binder.validate();

if (status.hasErrors()) {
  Notification.show("Validation error count: "
    + status.getValidationErrors().size());
}
----

Trying to save the field values to a business object will fail if any of the bound fields has an invalid value.
There are different save methods that let us choose how to structure the code for dealing with invalid values.

Handling a checked exception::
+
--
[source, java]
----
try {
  binder.writeBean(person);
} catch (ValidationException e) {
  Notification.show("Validation error count: "
    + e.getValidationErrors().size());
}
----
--

Defining an error handler when saving::
+
--
[source, java]
----
binder.writeBean(person,
  // Callback invoked if there is an error
  errors ->  {
    Notification.show("Validation error count: "
      + errors.size())
  }
);
----
--

Checking a return value::
+
--
[source, java]
----
boolean saved = binder.writeBeanIfValid(person);
if (!saved) {
  Notification.show("Validation error count: "
    + binder.getValidationErrors().size());
}
----
--

Binder keeps track of which bindings have been updated by the user and which bindings are in an invalid state.
It also fires an event when this status changes.
We can use that event to make the save and reset buttons of our forms become enabled or disabled depending on the current status of the form.

[source, java]
----
binder.addStatusChangeListener(event -> {
  // isValid() only checks the status, but doesn't make all
  // validation errors visible in the way that validate() does
  boolean isValid = binder.isValid();
  boolean hasChanges = binder.hasChanges();

  saveButton.setEnabled(hasChanges && isValid);
  resetButton.setEnable(hasChanges);
});
----

We can also listen for any change to any of the bound fields.
This is useful for creating a user interface where changes are saved immediately without any save button.

[source, java]
----
// Invoked when the value of any bound field component changes
binder.addFieldValueChangeListener(event -> {
  if (binder.writeBeanIfValid(person)) {
    // We only get here if there are no validation errors

    // TODO: Do something with the updated person instance
  }
});
----

In the previous example, a validation error in one field will prevent changes to other fields from being saved.
If we want all the fields to work independently of each other, we can instead save the value of each binding separately.

[source, java]
----
binder.addFieldValueChangeListener(event -> {
  Binding<Person, ?> binding = event.getBinding();
  if (binder.writeIfValid(person)) {
    // We get here if the updated binding had no validation errors

    // TODO: Do something with the updated person instance
  }
});
----

=== Automatic Saving

Instead of manually saving field values to a business object instance, we can also bind the values directly to an instance.
In this way, the binder takes care of automatically saving values from the fields.

[source, java]
----
Binder<Person> binder = new Binder<>();

// Field binding configuration omitted, it should be done here

Person person = new Person("John Doe", 1957);

// Loads the values from the person instance
// Sets person to be updated when any bound field is updated
binder.setBean(person);

Button saveButton = new Button("Save", event -> {
  if (binder.isValid()) {
    // person is always up-to-date as long as there are no
    // validation errors

    // TODO: Do something with the updated person instance
  }
});
----

[WARNING]
When using the [methodname]#bind# method, the business object instance will be updated whenever the user changes the value in any bound field.
If some other part of the application is also using the same instance, then that part might show changes before the user has clicked the save button.

== Binding Beans to Forms

The business objects used in an application are in most cases implemented as Java beans.
There is special support for that kind of business object in [classname]#BeanBinder#.
It can use reflection based on bean property names to bind values. This reduces the amount of code you have to write when binding to fields in the bean.

[source, java]
----
BeanBinder<Person> binder = new BeanBinder<>(Person.class);

// Bind based on property name
binder.bind(nameField, "name");
// Bind based on sub property path
binder.bind(streetAddressField, "address.street");
// Bind using forField for additional configuration
binder.forField(yearOfBirthField)
  .withConverter(
    new StringToIntegerConverter("Please enter a number"))
  .bind("yearOfBirth");
----

[NOTE]
[classname]#BeanBinder# uses strings to identify the properties so it is not refactor safe.

[classname]#BeanBinder# will automatically use JSR 303 Bean Validation annotations from the bean class if a Bean Validation implementation is available.
Constraints defined for properties in the bean will work in the same way as if configured when the binding is created.

[source, java]
----
public class Person {
  @Min(2000)
  private int yearOfBirth;

  //Non-standard constraint provided by Hibernate Validator
  @NotEmpty
  private String name;

  // + other fields, constructors, setters, and getters
  ...
}
----

It can sometimes be necessary to restrict when certain constraint annotations are active.
One such case is if administrator users are allowed to bypass some restrictions or if the backend should also perform validation, but with less strict constraints.


We can define a marker class for configuring a constraint to belong to a specific group and then configure [classname]#BeanBinder# to only use constraints from specific groups.

[source, java]
----
// Constraint defined for the default group
@Size(min = 3, groups = FrontendValidation.class)
private String title;

// Constraint defined for a specific group
@NotEmpty
private String name;
----

We can now set our binder to use the frontend validation group in addition to the default group, leaving the backend to only validate based on the constraints defined for the default group.

[source, java]
----
binder.setConstraintGroups(
  FrontendValidation.class,
  javax.validation.groups.Default.class);
----

[TIP]
We can also configure our binder to not use the default group but only use a group that is not used for any of the constraint annotations on the bean.
By doing so, all annotations on the bean will be ignored so that we can define our own validation for the user interface even though Bean Validation is used by the application's backend.

Constraint annotations can also be defined on the bean level instead of being defined for any specific property.
Validation errors caused by that kind of validation might not be directly associated with any field component shown in the user interface, so [classname]#BeanBinder# cannot know where such messages should be displayed.

Similarly to how the [methodname]#withStatusLabel# method can be used for defining where messages for a specific binding should be showed, we can also define a [classname]#Label# that is used for showing status messages that are not related to any specific field.

[source, java]
----
Label formStatusLabel = new Label();

BeanBinder<Person> binder = new BeanBinder<>(Person.class);

binder.setStatusLabel(formStatusLabel);

// Continue by binding fields
----

We can also define our own status handler to provide a custom way of handling statuses.

[source, java]
----
// We will first set the status label's content mode to HTML
// in order to display generated error messages separated by a <br> tag
formStatusLabel.setContentMode(ContentMode.HTML);

BinderValidationStatusHandler defaultHandler = binder.getValidationStatusHandler();

binder.setValidationStatusHandler(status -> {
    // create an error message on failed bean level validations
    List<Result<?>> errors = status.getBeanValidationErrors();

    // collect all bean level error messages into a single string,
    // separating each message with a <br> tag
    String errorMessage = errors.stream().map(Result::getMessage)
        .map(o -> o.get())
        // sanitize the individual error strings to avoid code injection
        // since we are displaying the resulting string as HTML
        .map(errorString -> Jsoup.clean(errorString, Whitelist.simpleText()))
        .collect(Collectors.joining("<br>"));

    // finally, display all bean level validation errors in a single label
    formStatusLabel.setValue(errorMessage);
    formStatusLabel.setVisible(!errorMessage.isEmpty());

    // Let the default handler show messages for each field
    defaultHandler.accept(status);
});
----

We can add custom form validators to [classname]#Binder#. These will be run on the updated item instance (bean) after field validators have succeeded and the item has been updated. If item level validators fail, the values updated in the item instance will be reverted, i.e. the bean will temporarily contain new values but after a call to [methodname]#save# or [methodname]#saveIfValid#, the bean will only contain the new values if all validators passed.

[classname]#BeanBinder# will automatically add bean-level validation based on the used bean instance and its annotations.

[source, java]
----
BeanBinder<Person> binder = new BeanBinder<Person>(
        Person.class);

// Phone or email has to be specified for the bean
Validator<Person> phoneOrEmail = Validator.from(
        personBean -> !"".equals(personBean.getPhone())
        || !"".equals(personBean.getEmail()),
        "A person must have either a phone number or an email address");
binder.withValidator(phoneOrEmail);

binder.forField(emailField).bind("email");
binder.forField(phoneField).bind("phone");

Person person = // e.g. JPA entity or bean from Grid
// Load person data to a form
binder.readBean(person);

Button saveButton = new Button("Save", event -> {
  // Using saveIfValid to avoid the try-catch block that is
  // needed if using the regular save method
  if (binder.writeBeanIfValid(person)) {
    // Person is valid and updated
    // TODO Store in the database
  }
});
----

If we want to ensure that the [classname]#Person# instance is not even temporarily updated, we should make a clone and use that with [methodname]#saveIfValid#.

== Using Binder with Vaadin Designer
We can use [classname]#Binder# to connect data to a form that is designed using Vaadin Designer.

This is the design HTML file that we create using Vaadin Designer:
[source, html]
----
<vaadin-form-layout size-full>
  <vaadin-text-field _id="name"
    caption="Name"></vaadin-text-field>
  <vaadin-text-field _id="yearOfBirth"
    caption="Year of birth"></vaadin-text-field>
  <vaadin-button _id="save">
    Save
  </vaadin-button>
</vaadin-form-layout>
----

This is the companion Java file that Vaadin Designer creates for us based on the design.
[source, java]
----
@DesignRoot
@AutoGenerated
public class PersonFormDesign extends FormLayout {
    protected TextField name;
    protected TextField yearOfBirth;
    protected Button save;

    public MyFormDesign() {
        Design.read(this);
    }
}
----

Based on those files, we can create a subclass of the design that uses a [classname]#BeanBinder# to automatically connect bean properties to field instances.
This will look at all instance fields that are of a Field type in the class and try to find a bean property with the same name.
The binder will automatically use a [interfacename]#ConverterFactory# to find a converter in case the type of the field component doesn't match the type of the bean property.

[source, java]
----
public class PersonForm extends PersonFormDesign {
  private BeanBinder<Person> binder
    = new BeanBinder<>(Person.class);

  public PersonForm(Person person) {
    binder.bindInstanceFields(this);

    binder.readBean(person);

    save.addClickListener(event -> {
      if (binder.writeBeanIfValid(person)) {
        // TODO: Do something with the updated person instance
      }
    });
  }

}
----

We can also bind some of the fields before calling [methodname]#bindInstanceFields#.
In this way, fields that require special configuration can still be configured manually while regular fields can be configured automatically.

[source,java]
----
binder.forField(yearOfBirth)
  .withConverter(
    new StringToIntegerConverter("Please enter a number"))
  .bind(Person::getYearOfBirth, Person::setYearOfBirth));

binder.bindInstanceFields(this);
----
